This patch is part of a series that adds support for the Armv8.m ARMv8.m Custom Datapath Extension to binutils. This patch introduces the Custom Instructions Class 1/2/3 (Single/ Dual, Accumulator/Non-accumulator varianats) to the arm backend. The following Custom Instructions are added: cx1, cx1a, cx1d, cx1da, cx2, cx2a, cx2d, cx2da, cx3, cx3a, cx3d, cx3da. Specification can be found at https://developer.arm.com/docs/ddi0607/latest This patch distinguishes between enabling CDE for different coprocessor numbers by defining multiple architecture flags. This means that the parsing of the architecture extension flags is kept entirely in the existing code path. We introduce a new IT block state to indicate the behaviour of these instructions. This new state allows being used in an IT block or outside an IT block, but does not allow the instruction to be used inside a VPT block. We need this since the CX*A instruction versions can be used in IT blocks, but they aren't to have the conditional suffixes on them. Hence we need to mark an instruction as allowed in either position. We also need a new flag to objdump, in order to determine whether to disassemble an instruction as CDE related or not. Successfully regression tested on arm-none-eabi, and arm-wince-pe. gas/ChangeLog: 2020-02-10 Stam Markianos-Wright <stam.markianos-wright@arm.com> Matthew Malcomson <matthew.malcomson@arm.com> * config/tc-arm.c (arm_ext_cde*): New feature sets for each CDE coprocessor that can be enabled. (enum pred_instruction_type): New pred type. (BAD_NO_VPT): New error message. (BAD_CDE): New error message. (BAD_CDE_COPROC): New error message. (enum operand_parse_code): Add new immediate operands. (parse_operands): Account for new immediate operands. (check_cde_operand): New. (cde_coproc_enabled): New. (cde_coproc_pos): New. (cde_handle_coproc): New. (cxn_handle_predication): New. (do_custom_instruction_1): New. (do_custom_instruction_2): New. (do_custom_instruction_3): New. (do_cx1): New. (do_cx1a): New. (do_cx1d): New. (do_cx1da): New. (do_cx2): New. (do_cx2a): New. (do_cx2d): New. (do_cx2da): New. (do_cx3): New. (do_cx3a): New. (do_cx3d): New. (do_cx3da): New. (handle_pred_state): Define new IT block behaviour. (insns): Add newn CX*{,d}{,a} instructions. (CDE_EXTENSIONS,armv8m_main_ext_table,armv8_1m_main_ext_table): Define new cdecp extension strings. * doc/c-arm.texi: Document new cdecp extension arguments. * testsuite/gas/arm/cde-scalar.d: New test. * testsuite/gas/arm/cde-scalar.s: New test. * testsuite/gas/arm/cde-warnings.d: New test. * testsuite/gas/arm/cde-warnings.l: New test. * testsuite/gas/arm/cde-warnings.s: New test. * testsuite/gas/arm/cde.d: New test. * testsuite/gas/arm/cde.s: New test. include/ChangeLog: 2020-02-10 Stam Markianos-Wright <stam.markianos-wright@arm.com> Matthew Malcomson <matthew.malcomson@arm.com> * opcode/arm.h (ARM_EXT2_CDE): New extension macro. (ARM_EXT2_CDE0): New extension macro. (ARM_EXT2_CDE1): New extension macro. (ARM_EXT2_CDE2): New extension macro. (ARM_EXT2_CDE3): New extension macro. (ARM_EXT2_CDE4): New extension macro. (ARM_EXT2_CDE5): New extension macro. (ARM_EXT2_CDE6): New extension macro. (ARM_EXT2_CDE7): New extension macro. opcodes/ChangeLog: 2020-02-10 Stam Markianos-Wright <stam.markianos-wright@arm.com> Matthew Malcomson <matthew.malcomson@arm.com> * arm-dis.c (struct cdeopcode32): New. (CDE_OPCODE): New macro. (cde_opcodes): New disassembly table. (regnames): New option to table. (cde_coprocs): New global variable. (print_insn_cde): New (print_insn_thumb32): Use print_insn_cde. (parse_arm_disassembler_options): Parse coprocN args. |
||
---|---|---|
bfd | ||
binutils | ||
config | ||
contrib | ||
cpu | ||
elfcpp | ||
etc | ||
gas | ||
gdb | ||
gdbserver | ||
gdbsupport | ||
gnulib | ||
gold | ||
gprof | ||
include | ||
intl | ||
ld | ||
libctf | ||
libdecnumber | ||
libiberty | ||
opcodes | ||
readline | ||
sim | ||
texinfo | ||
zlib | ||
.cvsignore | ||
.gitattributes | ||
.gitignore | ||
COPYING | ||
COPYING.LIB | ||
COPYING.LIBGLOSS | ||
COPYING.NEWLIB | ||
COPYING3 | ||
COPYING3.LIB | ||
ChangeLog | ||
MAINTAINERS | ||
Makefile.def | ||
Makefile.in | ||
Makefile.tpl | ||
README | ||
README-maintainer-mode | ||
ar-lib | ||
compile | ||
config-ml.in | ||
config.guess | ||
config.rpath | ||
config.sub | ||
configure | ||
configure.ac | ||
depcomp | ||
djunpack.bat | ||
install-sh | ||
libtool.m4 | ||
ltgcc.m4 | ||
ltmain.sh | ||
ltoptions.m4 | ||
ltsugar.m4 | ||
ltversion.m4 | ||
lt~obsolete.m4 | ||
makefile.vms | ||
missing | ||
mkdep | ||
mkinstalldirs | ||
move-if-change | ||
multilib.am | ||
setup.com | ||
src-release.sh | ||
symlink-tree | ||
test-driver | ||
ylwrap |
README
README for GNU development tools This directory contains various GNU compilers, assemblers, linkers, debuggers, etc., plus their support routines, definitions, and documentation. If you are receiving this as part of a GDB release, see the file gdb/README. If with a binutils release, see binutils/README; if with a libg++ release, see libg++/README, etc. That'll give you info about this package -- supported targets, how to use it, how to report bugs, etc. It is now possible to automatically configure and build a variety of tools with one command. To build all of the tools contained herein, run the ``configure'' script here, e.g.: ./configure make To install them (by default in /usr/local/bin, /usr/local/lib, etc), then do: make install (If the configure script can't determine your type of computer, give it the name as an argument, for instance ``./configure sun4''. You can use the script ``config.sub'' to test whether a name is recognized; if it is, config.sub translates it to a triplet specifying CPU, vendor, and OS.) If you have more than one compiler on your system, it is often best to explicitly set CC in the environment before running configure, and to also set CC when running make. For example (assuming sh/bash/ksh): CC=gcc ./configure make A similar example using csh: setenv CC gcc ./configure make Much of the code and documentation enclosed is copyright by the Free Software Foundation, Inc. See the file COPYING or COPYING.LIB in the various directories, for a description of the GNU General Public License terms under which you can copy the files. REPORTING BUGS: Again, see gdb/README, binutils/README, etc., for info on where and how to report problems.