2007-02-17 14:35:03 +01:00
# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
2015-01-04 11:31:30 +01:00
# 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012,
2016-01-12 19:36:00 +01:00
# 2014, 2015, 2016 Free Software Foundation, Inc.
1997-08-22 00:57:35 +02:00
#
# This file is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
2009-04-14 10:50:26 +02:00
# the Free Software Foundation; either version 3 of the License, or
1997-08-22 00:57:35 +02:00
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU General Public License
2009-04-14 10:50:26 +02:00
# along with this program; see the file COPYING3. If not see
# <http://www.gnu.org/licenses/>.
1997-08-22 00:57:35 +02:00
##############################################################################
configure.in: Convert to autoconf script.
(toplev)
* configure.in: Convert to autoconf script. Blow away lots
of now-redundant Makefile fragments.
* configure: Generate using Autoconf.
* Makefile.tpl: Rewrite to reflect autoconfiscation.
* Makefile.in: Regenerate.
(config)
* acx.m4: New.
* mh-a68bsd, mh-aix386, mh-apollo68, mh-delta88, mh-hp300,
mh-hpux, mh-hpux8, mh-irix5, mh-irix6, mh-ncrsvr43, mh-openedition,
mh-riscos, mh-sysv: Delete.
* mh-cxux, mh-dgux386, mh-interix, mh-lynxrs6k, mh-ncr3000,
mh-necv4, mh-sco, mh-solaris, mh-sysv4, mh-sysv5, mt-v810: Simplify.
From-SVN: r60558
2002-12-28 07:57:50 +01:00
### WARNING: this file contains embedded tabs. Do not run untabify on this file.
2008-04-18 12:57:44 +02:00
m4_include(config/acx.m4)
m4_include(config/override.m4)
2008-03-16 09:19:08 +01:00
m4_include(config/proginstall.m4)
2010-01-02 15:13:37 +01:00
m4_include(config/elf.m4)
2010-01-07 22:58:23 +01:00
m4_include([libtool.m4])
m4_include([ltoptions.m4])
m4_include([ltsugar.m4])
m4_include([ltversion.m4])
m4_include([lt~obsolete.m4])
2012-07-02 13:43:46 +02:00
m4_include([config/isl.m4])
2004-06-09 10:17:32 +02:00
configure.in: Convert to autoconf script.
(toplev)
* configure.in: Convert to autoconf script. Blow away lots
of now-redundant Makefile fragments.
* configure: Generate using Autoconf.
* Makefile.tpl: Rewrite to reflect autoconfiscation.
* Makefile.in: Regenerate.
(config)
* acx.m4: New.
* mh-a68bsd, mh-aix386, mh-apollo68, mh-delta88, mh-hp300,
mh-hpux, mh-hpux8, mh-irix5, mh-irix6, mh-ncrsvr43, mh-openedition,
mh-riscos, mh-sysv: Delete.
* mh-cxux, mh-dgux386, mh-interix, mh-lynxrs6k, mh-ncr3000,
mh-necv4, mh-sco, mh-solaris, mh-sysv4, mh-sysv5, mt-v810: Simplify.
From-SVN: r60558
2002-12-28 07:57:50 +01:00
AC_INIT(move-if-change)
2009-08-24 21:08:51 +02:00
AC_PREREQ(2.64)
2009-08-20 00:19:37 +02:00
AC_DISABLE_OPTION_CHECKING
2007-02-09 16:14:37 +01:00
2008-06-16 23:36:27 +02:00
progname=$0
# if PWD already has a value, it is probably wrong.
if test -n "$PWD" ; then PWD=`${PWDCMD-pwd}`; fi
# Export original configure arguments for use by sub-configures.
# Quote arguments with shell meta charatcers.
TOPLEVEL_CONFIGURE_ARGUMENTS=
set -- "$progname" "$@"
for ac_arg
do
case "$ac_arg" in
*" "*|*" "*|*[[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\']]*)
ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"`
# if the argument is of the form -foo=baz, quote the baz part only
ac_arg=`echo "'$ac_arg'" | sed "s/^'\([[-a-zA-Z0-9]]*=\)/\\1'/"` ;;
*) ;;
esac
# Add the quoted argument to the list.
TOPLEVEL_CONFIGURE_ARGUMENTS="$TOPLEVEL_CONFIGURE_ARGUMENTS $ac_arg"
done
if test "$silent" = yes; then
TOPLEVEL_CONFIGURE_ARGUMENTS="$TOPLEVEL_CONFIGURE_ARGUMENTS --silent"
fi
# Remove the initial space we just introduced and, as these will be
# expanded by make, quote '$'.
TOPLEVEL_CONFIGURE_ARGUMENTS=`echo "x$TOPLEVEL_CONFIGURE_ARGUMENTS" | sed -e 's/^x *//' -e 's,\\$,$$,g'`
AC_SUBST(TOPLEVEL_CONFIGURE_ARGUMENTS)
2007-02-09 16:14:37 +01:00
# Find the build, host, and target systems.
ACX_NONCANONICAL_BUILD
ACX_NONCANONICAL_HOST
ACX_NONCANONICAL_TARGET
dnl Autoconf 2.5x and later will set a default program prefix if
dnl --target was used, even if it was the same as --host. Disable
dnl that behavior. This must be done before AC_CANONICAL_SYSTEM
dnl to take effect.
test "$host_noncanonical" = "$target_noncanonical" &&
test "$program_prefix$program_suffix$program_transform_name" = \
NONENONEs,x,x, &&
program_transform_name=s,y,y,
configure.in: Convert to autoconf script.
(toplev)
* configure.in: Convert to autoconf script. Blow away lots
of now-redundant Makefile fragments.
* configure: Generate using Autoconf.
* Makefile.tpl: Rewrite to reflect autoconfiscation.
* Makefile.in: Regenerate.
(config)
* acx.m4: New.
* mh-a68bsd, mh-aix386, mh-apollo68, mh-delta88, mh-hp300,
mh-hpux, mh-hpux8, mh-irix5, mh-irix6, mh-ncrsvr43, mh-openedition,
mh-riscos, mh-sysv: Delete.
* mh-cxux, mh-dgux386, mh-interix, mh-lynxrs6k, mh-ncr3000,
mh-necv4, mh-sco, mh-solaris, mh-sysv4, mh-sysv5, mt-v810: Simplify.
From-SVN: r60558
2002-12-28 07:57:50 +01:00
AC_CANONICAL_SYSTEM
AC_ARG_PROGRAM
2007-02-09 16:14:37 +01:00
m4_pattern_allow([^AS_FOR_TARGET$])dnl
Makefile.tpl (AR_FOR_BUILD, [...]): Use autoconf substitutions.
2007-10-01 Paolo Bonzini <bonzini@gnu.org>
* Makefile.tpl (AR_FOR_BUILD, AS_FOR_BUILD, CXX_FOR_BUILD,
DLLTOOL_FOR_BUILD, GCJ_FOR_BUILD, GFORTRAN_FOR_BUILD,
LDFLAGS_FOR_BUILD, LD_FOR_BUILD, NM_FOR_BUILD, RANLIB_FOR_BUILD,
WINDMC_FOR_BUILD, WINDRES_FOR_BUILD): Use autoconf substitutions.
* configure.ac: Default them to host tools for $host = $build.
Subst them.
* configure: Regenerate.
* Makefile.in: Regenerate.
From-SVN: r128902
2007-10-01 09:15:42 +02:00
m4_pattern_allow([^AS_FOR_BUILD$])dnl
2007-02-09 16:14:37 +01:00
2003-07-13 22:47:31 +02:00
# Get 'install' or 'install-sh' and its variants.
AC_PROG_INSTALL
2004-06-09 10:17:32 +02:00
ACX_PROG_LN
configure.in: Test the ability to symlink directories.
2005-05-24 Paolo Bonzini <bonzini@gnu.org>
* configure.in: Test the ability to symlink directories.
* configure: Regenerate.
* Makefile.def (bootstrap-stage): New definitions.
* Makefile.tpl (configure-stage1-gcc,
configure-stage2-gcc, configure-stage3-gcc,
all-stage1-gcc, all-stage2-gcc, all-stage3-gcc,
new-bootstrap, new-cleanstrap, new-restage1, new-restage2,
new-restage3, compare): Autogenerate, see Makefile.in
entry for behavioral changes.
(distclean-stage1, new-stage1-start, new-stage1-end,
new-stage1-bubble, distclean-stage2, new-stage2-start,
new-stage2-end, new-stage2-bubble, distclean-stage3,
new-stage3-start, new-stage3-end): New autogenerated targets.
(objext, prebootstrap, BOOT_CFLAGS,
POSTSTAGE1_FLAGS_TO_PASS): Move above the autogenerated
targets.
* Makefile.in: Regenerate.
(distclean-stage1, new-stage1-start, new-stage1-end,
new-stage1-bubble, distclean-stage2, new-stage2-start,
new-stage2-end, new-stage2-bubble, distclean-stage3,
new-stage3-start, new-stage3-end): New targets.
(all-stage1-gcc): Move prebootstrap dependency from here...
(configure-stage1-gcc): ...to here.
(new-bootstrap): Use bubble targets.
(new-cleanstrap, new-restage1, new-restage2, new-restage3):
Use per-stage distclean targets.
(configure-stage1-gcc, configure-stage2-gcc,
configure-stage3-gcc, all-stage1-gcc,
all-stage2-gcc, all-stage3-gcc, new-bootstrap):
Use new-stageN-start to prepare the tree.
From-SVN: r82200
2004-05-24 13:08:12 +02:00
AC_PROG_LN_S
2009-08-30 16:33:13 +02:00
AC_PROG_SED
AC_PROG_AWK
2003-07-13 22:47:31 +02:00
2004-10-23 22:28:46 +02:00
srcpwd=`cd ${srcdir} ; ${PWDCMD-pwd}`
# We pass INSTALL explicitly to sub-makes. Make sure that it is not
# a relative path.
if test "$INSTALL" = "${srcdir}/install-sh -c"; then
INSTALL="${srcpwd}/install-sh -c"
fi
configure.in: Convert to autoconf script.
(toplev)
* configure.in: Convert to autoconf script. Blow away lots
of now-redundant Makefile fragments.
* configure: Generate using Autoconf.
* Makefile.tpl: Rewrite to reflect autoconfiscation.
* Makefile.in: Regenerate.
(config)
* acx.m4: New.
* mh-a68bsd, mh-aix386, mh-apollo68, mh-delta88, mh-hp300,
mh-hpux, mh-hpux8, mh-irix5, mh-irix6, mh-ncrsvr43, mh-openedition,
mh-riscos, mh-sysv: Delete.
* mh-cxux, mh-dgux386, mh-interix, mh-lynxrs6k, mh-ncr3000,
mh-necv4, mh-sco, mh-solaris, mh-sysv4, mh-sysv5, mt-v810: Simplify.
From-SVN: r60558
2002-12-28 07:57:50 +01:00
# Set srcdir to "." if that's what it is.
# This is important for multilib support.
pwd=`${PWDCMD-pwd}`
if test "${pwd}" = "${srcpwd}" ; then
srcdir=.
fi
topsrcdir=$srcpwd
1997-08-22 00:57:35 +02:00
2002-12-16 19:23:00 +01:00
extra_host_args=
2004-12-02 12:05:13 +01:00
1997-08-22 00:57:35 +02:00
### To add a new directory to the tree, first choose whether it is a target
### or a host dependent tool. Then put it into the appropriate list
2002-12-16 19:23:00 +01:00
### (library or tools, host or target), doing a dependency sort.
# Subdirs will be configured in the order listed in build_configdirs,
# configdirs, or target_configdirs; see the serialization section below.
# Dependency sorting is only needed when *configuration* must be done in
# a particular order. In all cases a dependency should be specified in
# the Makefile, whether or not it's implicitly specified here.
1997-08-22 00:57:35 +02:00
2002-12-16 19:23:00 +01:00
# Double entries in build_configdirs, configdirs, or target_configdirs may
# cause circular dependencies and break everything horribly.
1997-08-22 00:57:35 +02:00
Makefile.def (build_modules): Add bison, byacc, flex, m4, texinfo.
2004-07-01 Paolo Bonzini <bonzini@gnu.org>
* Makefile.def (build_modules): Add bison, byacc, flex,
m4, texinfo.
(flags_to_pass): Add FLEX.
* Makefile.tpl (BUILD_DIR_PREFIX, BASE_EXPORTS): New.
(BUILD_EXPORTS, HOST_EXPORTS, BASE_TARGET_EXPORTS): Include it.
(DEFAULT_YACC, USUAL_YACC, DEFAULT_LEX, USUAL_LEX, DEFAULT_M4,
DEFAULT_MAKEINFO): Remove.
(CONFIGURED_YACC, CONFIGURED_FLEX, CONFIGURED_BISON,
CONFIGURED_LEX, CONFIGURED_M4, CONFIGURED_MAKEINFO): Substitute.
(YACC, FLEX, BISON, LEX, M4, MAKEINFO): Define to look into
objdir or else use configured tool.
(all-build): New.
(all): Depend on it.
(Build module dependencies): Add.
* Makefile.in: Regenerate.
* configure.in: Better support for multiple build modules,
matching what is done for host/target modules. Do not look
for "plausible" locations of build tools if Canadian cross.
Use autoconf's AC_PROG_CC to find a C compiler. Define
BUILD_DIR_PREFIX. Look for flex, makeinfo and m4.
* configure: Regenerate.
From-SVN: r84017
2004-07-02 09:55:37 +02:00
# these library is used by various programs built for the build
# environment
#
2014-10-23 11:14:48 +02:00
build_libs="build-libiberty build-libcpp"
Makefile.def (build_modules): Add bison, byacc, flex, m4, texinfo.
2004-07-01 Paolo Bonzini <bonzini@gnu.org>
* Makefile.def (build_modules): Add bison, byacc, flex,
m4, texinfo.
(flags_to_pass): Add FLEX.
* Makefile.tpl (BUILD_DIR_PREFIX, BASE_EXPORTS): New.
(BUILD_EXPORTS, HOST_EXPORTS, BASE_TARGET_EXPORTS): Include it.
(DEFAULT_YACC, USUAL_YACC, DEFAULT_LEX, USUAL_LEX, DEFAULT_M4,
DEFAULT_MAKEINFO): Remove.
(CONFIGURED_YACC, CONFIGURED_FLEX, CONFIGURED_BISON,
CONFIGURED_LEX, CONFIGURED_M4, CONFIGURED_MAKEINFO): Substitute.
(YACC, FLEX, BISON, LEX, M4, MAKEINFO): Define to look into
objdir or else use configured tool.
(all-build): New.
(all): Depend on it.
(Build module dependencies): Add.
* Makefile.in: Regenerate.
* configure.in: Better support for multiple build modules,
matching what is done for host/target modules. Do not look
for "plausible" locations of build tools if Canadian cross.
Use autoconf's AC_PROG_CC to find a C compiler. Define
BUILD_DIR_PREFIX. Look for flex, makeinfo and m4.
* configure: Regenerate.
From-SVN: r84017
2004-07-02 09:55:37 +02:00
# these tools are built for the build environment
configure.ac (build_tools): Remove build-byacc.
* configure.ac (build_tools): Remove build-byacc.
(host_libs): Remove mmalloc.
(host_tools): Remove byacc make patch prms send-pr ash bash bzip2
autoconf automake libtool diff rcs fileutils shellutils time
textutils wdiff find uudecode hello tar gzip indent recode release
sed perl gawk findutils gettext zip.
(libgcj): Remove target-qthreads.
(target_tools): Remove target-examples target-gperf.
(YACC): Don't handle building byacc.
* configure: Regenerate.
* Makefile.def (ash, autoconf, automake, bash, byacc, bzip2, diff,
dosutils, examples, fileutils, find, findutils, gawk, gettext,
gnuserv, gperf, gzip, hello, indent, libtool, make, mmalloc,
patch, perl, prms, qthreads, rcs, recode, release, sed, send-pr,
shellutils, tar, textutils, time, uudecode, wdiff, zip): Don't
handle building components.
* Makefile.in: Regenerate.
From-SVN: r172042
2011-04-06 14:18:12 +02:00
build_tools="build-texinfo build-flex build-bison build-m4 build-fixincludes"
Makefile.def (build_modules): Add bison, byacc, flex, m4, texinfo.
2004-07-01 Paolo Bonzini <bonzini@gnu.org>
* Makefile.def (build_modules): Add bison, byacc, flex,
m4, texinfo.
(flags_to_pass): Add FLEX.
* Makefile.tpl (BUILD_DIR_PREFIX, BASE_EXPORTS): New.
(BUILD_EXPORTS, HOST_EXPORTS, BASE_TARGET_EXPORTS): Include it.
(DEFAULT_YACC, USUAL_YACC, DEFAULT_LEX, USUAL_LEX, DEFAULT_M4,
DEFAULT_MAKEINFO): Remove.
(CONFIGURED_YACC, CONFIGURED_FLEX, CONFIGURED_BISON,
CONFIGURED_LEX, CONFIGURED_M4, CONFIGURED_MAKEINFO): Substitute.
(YACC, FLEX, BISON, LEX, M4, MAKEINFO): Define to look into
objdir or else use configured tool.
(all-build): New.
(all): Depend on it.
(Build module dependencies): Add.
* Makefile.in: Regenerate.
* configure.in: Better support for multiple build modules,
matching what is done for host/target modules. Do not look
for "plausible" locations of build tools if Canadian cross.
Use autoconf's AC_PROG_CC to find a C compiler. Define
BUILD_DIR_PREFIX. Look for flex, makeinfo and m4.
* configure: Regenerate.
From-SVN: r84017
2004-07-02 09:55:37 +02:00
1997-08-22 00:57:35 +02:00
# these libraries are used by various programs built for the host environment
2014-08-18 17:42:11 +02:00
#f
2014-11-11 19:54:16 +01:00
host_libs="intl libiberty opcodes bfd readline tcl tk itcl libgui zlib libbacktrace libcpp libdecnumber gmp mpfr mpc isl libelf libiconv"
1997-08-22 00:57:35 +02:00
# these tools are built for the host environment
# Note, the powerpc-eabi build depends on sim occurring before gdb in order to
# know that we are building the simulator.
2002-12-16 19:23:00 +01:00
# binutils, gas and ld appear in that order because it makes sense to run
# "make check" in that particular order.
2010-04-27 16:27:15 +02:00
# If --enable-gold is used, "gold" may replace "ld".
2015-01-09 22:23:09 +01:00
host_tools="texinfo flex bison binutils gas ld fixincludes gcc cgen sid sim gdb gprof etc expect dejagnu m4 utils guile fastjar gnattools libcc1 gotools"
1998-10-12 12:44:57 +02:00
1997-08-22 00:57:35 +02:00
# these libraries are built for the target environment, and are built after
# the host libraries and the host tools (which may be a cross compiler)
2011-06-22 21:40:45 +02:00
# Note that libiberty is not a target library.
2007-02-13 22:27:11 +01:00
target_libraries="target-libgcc \
2012-09-17 18:38:38 +02:00
target-libbacktrace \
1998-10-12 12:44:57 +02:00
target-libgloss \
target-newlib \
2007-09-20 02:58:02 +02:00
target-libgomp \
2013-10-29 19:37:47 +01:00
target-libcilkrts \
2014-11-13 15:03:17 +01:00
target-liboffloadmic \
2017-01-24 13:45:56 +01:00
target-libhsail-rt \
2012-05-01 17:48:28 +02:00
target-libatomic \
2011-11-08 12:13:41 +01:00
target-libitm \
2003-03-04 08:23:56 +01:00
target-libstdc++-v3 \
2012-11-12 16:53:47 +01:00
target-libsanitizer \
Commit the vtable verification feature.
Commit the vtable verification feature. This feature is designed to
detect, at run time, if/when the vtable pointer in a C++ object has
been corrupted, before allowing virtual calls through that pointer.
If pointer corruption is detected, execution of the program is halted.
libstdc++-v3 ChangeLog:
2013-08-06 Caroline Tice <cmtice@google.com>
* fragment.am: Add XTEMPLATE_FLAGS.
* configure.ac: Add definitions for --enable-vtable-verify.
* acinclude.m4: Add --enable-vtable-verify and
--disable-vtable-verify; define --enable-vtable-verify; define
VTV_CXXFLAGS, VTV_PCH_CXXFLAGS and VTV_CXXLINKFLAGS.
* config/abi/pre/gnu.ver: Export symbols for vtable verification.
* libsupc++/Makefile.am: Define vtv_sources and add it to
libsupc___la_SOURCES and libsupc__convenience_la_SOURCES.
* libsupc++/vtv_stubs.cc: New file.
* include/Makefile.am: Add VTV_PCH_CXXFLAGS to PCHFLAGS.
* src/Makefile.am: Add VTV_CXXFLAGS to AM_CXXFLAGS; add
VTV_CXXLINKFLAGS to CXXLINK.
* src/c++98/Makefile.am: Comment out XTEMPLATE_FLAGS; add VTV_CXXFLAGS
to AM_CXXFLAGS; add VTV_CXXXLINKFLAGS to CXXLINK.
* src/C++11/Makefile.am: Ditto.
* doc/xml/manual/configure.xml: Add entry for --enable-vtable-verify.
* scripts/testsuite_flags.in: Add cxxvtvflags to Usage; cause
cxxvtvflags to use VTV_CXXFLAGS and VTV_CXXLINKFLAGS.
* testsuite/lib/libstdc++.exp: Add cxxvtvflags; add code to locate
libvtv if --enable-vtable-verify was used; set cxxvtvflags; add
cxxvtvflags to cxx_final.
* testsuite/18_support/bad_exception/23591_thread-1.c: Add
-fvtable-verify=none to compiler flags.
* testsuite/17_intro/freestanding.cc: Add -fvtable-verify=none
to compiler flags.
* configure: Regenerated.
* Makefile.in: Regenerated.
* python/Makefile.in: Regenerated.
* include/Makefile.in: Regenerated.
* libsupc++/Makefile.in: Regenerated.
* config.h.in: Regenerated.
* po/Makefile.in: Regenerated.
* src/Makefile.in: Regenerated.
* src/c++98/Makefile.in: Regenerated.
* src/c++11/Makefile.in: Regenerated.
* doc/Makefile.in: Regenerated.
* testsuite/Makefile.in: Regenerated.
top level ChangeLog:
2013-08-06 Caroline Tice <cmtice@google.com>
* configure.ac: Add target-libvtv to target_libraries; disable libvtv
on non-linux systems; add target-libvtv to noconfigdirs; add
libsupc++/.libs to C++ library search paths.
* configure: Regenerated.
* Makefile.def: Add libvtv to target_modules; make libvtv depend on
libstdc++ and libgcc.
* Makefile.in: Regenerated.
include/ChangeLog:
2013-08-06 Caroline Tice <cmtice@google.com>
* vtv-change-permission.h: New file.
contrib/ChangeLog:
2013-08-06 Caroline Tice4 <cmtice@google.com>
* gcc_update: Add libvtv files.
libgcc/ChangeLog:
2013-08-06 Caroline Tice <cmtice@google.com>
config.host (extra_parts): Add vtv_start.o, vtv_end.o
vtv_start_preinit.o and vtv_end_preinit.o.
configure.ac: Add code to check/set enable_vtable_verify.
Makefile.in: Add rules to build vtv_*.o, if enable_vtable_verify is
true.
vtv_start_preinit.c: New file.
vtv_end_preinit.c: New file.
vtv_start.c: New file.
vtv_end.c: New file.
configure: Regenerated.
gcc/ChangeLog:
2013-08-06 Caroline Tice <cmtice@google.com>
* gcc.c (VTABLE_VERIFICATION_SPEC): New definition.
(LINK_COMMAND_SPEC): Add VTABLE_VERIFICATION_SPEC.
* tree-pass.h: Add pass_vtable_verify.
* varasm.c (assemble_variable): Add code to properly set the comdat
section and name for the .vtable_map_vars section.
(assemble_vtyv_preinit_initializer): New function.
(default_sectin_type_flags): Make sure .vtable_map_vars section has
LINK_ONCE flag.
* output.h: Add function decl for assemble_vtv_preinit_initializer.
* vtable-verify.c: New file.
* vtable-verify.h: New file.
* flag-types.h (enum vtv_priority): Defintions for flag_vtable_verify
initialiation levels.
* timevar.def (TV_VTABLE_VERIFICATION): New definition.
* passes.def: Insert pass_vtable_verify.
* aclocal.m4: Reorder includes.
* doc/invoke.texi: Add documentation for the flags -fvtable-verify=,
-fvtv-debug and -fvtv-counts.
* config/gnu-user.h (GNU_USER_TARGET_STARTFILE_SPEC): Add vtv_start*.o,
as appropriate, if -fvtable-verify=... is used.
(GNU_USER_TARGET_ENDFILE_SPEC): Add vtv_end*.o as appropriate, if
-fvtable-verify=... is used.
* Makefile.in (OBJS): Add vtable-verify.o to list.
(vtable-verify.o): Add new build rule.
(GTFILES): Add vtable-verify.c to list.
* common.opt (fvtable-verify=): New flag.
(vtv_priority): Values for fvtable-verify= flag.
(fvtv-counts): New flag.
(fvtv-debug): New flag.
* tree.h (save_vtable_map_decl): New extern function decl.
gcc/cp/ChangeLog:
2013-08-06 Caroline Tice <cmtice@google.com>
* Make-lang.in (*CXX_AND_OBJCXX_OBJS): Add vtable-class-hierarchy.o to
list.
(vtable-class-hierarchy.o): Add build rule.
* cp-tree.h (vtv_start_verification_constructor_init_function): New
extern function decl.
(vtv_finish_verification_constructor_init_function): New extern
function decl.
(build_vtbl_address): New extern function decl.
(get_mangled_vtable_map_var_name): New extern function decl.
(vtv_compute_class_hierarchy_transitive_closure): New extern function
decl.
(vtv_generate_init_routine): New extern function decl.
(vtv_save_class_info): New extern function decl.
(vtv_recover_class_info): New extern function decl.
(vtv_build_vtable_verify_fndecl): New extern function decl.
* class.c (finish_struct_1): Add call to vtv_save_class_info if
flag_vtable_verify is true.
* config-lang.in: Add vtable-class-hierarchy.c to gtfiles list.
* vtable-class-hierarchy.c: New file.
* mangle.c (get_mangled_vtable_map_var_name): New function.
* decl2.c (start_objects): Update function comment.
(cp_write_global_declarations): Call vtv_recover_class_info,
vtv_compute_class_hierarchy_transitive_closure and
vtv_build_vtable_verify_fndecl, before calling
finalize_compilation_unit, and call vtv_generate_init_rount after, IFF
flag_vtable_verify is true.
(vtv_start_verification_constructor_init_function): New function.
(vtv_finish_verification_constructor_init_function): New function.
* init.c (build_vtbl_address): Remove static qualifier from function.
libvtv/ChangeLog:
2013-08-06 Caroline Tice <cmtice@google.com>
Initial check-in of new vtable verification feature.
* configure.ac : New file.
* acinclude.m4 : New file.
* Makefile.am : New file.
* aclocal.m4 : New file.
* configure.tgt : New file.
* configure: New file (generated).
* Makefile.in: New file (generated).
* vtv_set.h : New file.
* vtv_utils.cc : New file.
* vtv_utils.h : New file.
* vtv_malloc.cc : New file.
* vtv_rts.cc : New file.
* vtv_malloc.h : New file.
* vtv_rts.h : New file.
* vtv_fail.cc : New file.
* vtv_fail.h : New file.
* vtv_map.h : New file.
* scripts/run-testsuite.sh : New file.
* scripts/sum-vtv-counts.c : New file.
* testsuite/parts-test-main.h : New file.
* testusite/dataentry.cc : New file.
* testsuite/temp_deriv.cc : New file.
* testsuite/register_pair.cc : New file.
* testsuite/virtual_inheritance.cc : New file.
* testsuite/field-test.cc : New file.
* testsuite/nested_vcall_test.cc : New file.
* testsuite/template-list-iostream.cc : New file.
* testsuite/register_pair_inserts.cc : New file.
* testsuite/register_pair_inserts_mt.cc : New file.
* testsuite/event.list : New file.
* testsuite/parts-test-extra-parts-views.cc : New file.
* testsuite/parts-test-extra-parts-views.h : New file.
* testsuite/environment-fail-32.s : New file.
* testsuite/parts-test-extra-parts.h : New file.
* testsuite/temp_deriv2.cc : New file.
* testsuite/dlopen_mt.cc : New file.
* testsuite/event.h : New file.
* testsuite/template-list.cc : New file.
* testsuite/replace-fail.cc : New file.
* testsuite/Makefile.am : New file.
* testsuite/Makefile.in: New file (generated).
* testsuite/mempool_negative.c : New file.
* testsuite/parts-test-main.cc : New file.
* testsuite/event-private.cc : New file.
* testsuite/thunk.cc : New file.
* testsuite/event-defintiions.cc : New file.
* testsuite/event-private.h : New file.
* testsuite/parts-test.list : New file.
* testusite/register_pair_mt.cc : New file.
* testsuite/povray-derived.cc : New file.
* testsuite/event-main.cc : New file.
* testsuite/environment.cc : New file.
* testsuite/template-list2.cc : New file.
* testsuite/thunk_vtable_map_attack.cc : New file.
* testsuite/parts-test-extra-parts.cc : New file.
* testsuite/environment-fail-64.s : New file.
* testsuite/dlopen.cc : New file.
* testsuite/so.cc : New file.
* testsuite/temp_deriv3.cc : New file.
* testsuite/const_vtable.cc : New file.
* testsuite/mempool_positive.c : New file.
* testsuite/dup_name.cc : New file.
From-SVN: r201555
2013-08-07 05:38:59 +02:00
target-libvtv \
2015-03-10 10:37:41 +01:00
target-libmpx \
Makefile.def (target_modules): Add libssp.
* Makefile.def (target_modules): Add libssp.
* configure.in (target_libraries): Add target-libssp.
* configure: Rebuilt.
* Makefile.in: Rebuilt.
gcc/
* gcc.c (LINK_SSP_SPEC): Define.
(link_ssp_spec): New variable.
(LINK_COMMAND_SPEC): Add %(link_ssp).
(static_specs): Add link_ssp_spec.
* configure.ac (TARGET_LIBC_PROVIDES_SSP): New test.
* configure: Rebuilt.
* config.in: Rebuilt.
* config/rs6000/linux.h (TARGET_THREAD_SSP_OFFSET): Define.
* config/rs6000/linux64.h (TARGET_THREAD_SSP_OFFSET): Likewise.
* config/i386/linux.h (TARGET_THREAD_SSP_OFFSET): Likewise.
* config/i386/linux64.h (TARGET_THREAD_SSP_OFFSET): Likewise.
* config/rs6000/rs6000.md (stack_protect_set, stack_protect_test):
If TARGET_THREAD_SSP_OFFSET is defined, use -0x7010(13) resp.
-0x7008(2) instead of reading __stack_chk_guard variable.
* config/i386/i386.md (UNSPEC_SP_SET, UNSPEC_SP_TEST): Change
number.
(UNSPEC_SP_TLS_SET, UNSPEC_SP_TLS_TEST): New constants.
(stack_protect_set, stack_protect_test): Use *_tls* patterns
if TARGET_THREAD_SSP_OFFSET is defined.
(stack_tls_protect_set_si, stack_tls_protect_set_di,
stack_tls_protect_test_si, stack_tls_protect_test_di): New insns.
Revert:
2005-06-27 Richard Henderson <rth@redhat.com>
* libgcc-std.ver (GCC_4.1.0): New.
* libgcc.h (__stack_chk_guard): Declare.
(__stack_chk_fail, __stack_chk_fail_local): Declare.
* libgcc2.c (L_stack_chk, L_stack_chk_local): New.
* mklibgcc.in (lib2funcs): Add them.
From-SVN: r101531
2005-07-02 10:52:21 +02:00
target-libssp \
2010-11-16 22:23:19 +01:00
target-libquadmath \
2004-05-13 08:41:07 +02:00
target-libgfortran \
2016-10-01 00:46:39 +02:00
target-libffi \
2004-02-10 11:54:48 +01:00
target-libobjc \
2010-11-19 22:47:18 +01:00
target-libada \
target-libgo"
1997-08-22 00:57:35 +02:00
2003-06-26 22:18:34 +02:00
# these tools are built using the target libraries, and are intended to
# run only in the target environment
1997-08-22 00:57:35 +02:00
#
2003-06-26 22:18:34 +02:00
# note: any program that *uses* libraries that are in the "target_libraries"
2011-03-25 14:06:37 +01:00
# list belongs in this list.
1997-08-22 00:57:35 +02:00
#
configure.ac (build_tools): Remove build-byacc.
* configure.ac (build_tools): Remove build-byacc.
(host_libs): Remove mmalloc.
(host_tools): Remove byacc make patch prms send-pr ash bash bzip2
autoconf automake libtool diff rcs fileutils shellutils time
textutils wdiff find uudecode hello tar gzip indent recode release
sed perl gawk findutils gettext zip.
(libgcj): Remove target-qthreads.
(target_tools): Remove target-examples target-gperf.
(YACC): Don't handle building byacc.
* configure: Regenerate.
* Makefile.def (ash, autoconf, automake, bash, byacc, bzip2, diff,
dosutils, examples, fileutils, find, findutils, gawk, gettext,
gnuserv, gperf, gzip, hello, indent, libtool, make, mmalloc,
patch, perl, prms, qthreads, rcs, recode, release, sed, send-pr,
shellutils, tar, textutils, time, uudecode, wdiff, zip): Don't
handle building components.
* Makefile.in: Regenerate.
From-SVN: r172042
2011-04-06 14:18:12 +02:00
target_tools="target-rda"
1997-08-22 00:57:35 +02:00
################################################################################
## All tools belong in one of the four categories, and are assigned above
## We assign ${configdirs} this way to remove all embedded newlines. This
## is important because configure will choke if they ever get through.
## ${configdirs} is directories we build using the host tools.
## ${target_configdirs} is directories we build using the target tools.
configdirs=`echo ${host_libs} ${host_tools}`
2003-06-26 22:18:34 +02:00
target_configdirs=`echo ${target_libraries} ${target_tools}`
2004-08-31 11:27:00 +02:00
build_configdirs=`echo ${build_libs} ${build_tools}`
2003-05-18 17:43:44 +02:00
2008-01-30 14:36:35 +01:00
m4_divert_text([PARSE_ARGS],
2010-11-02 01:20:35 +01:00
[case $srcdir in
*" "*)
m4_pushdef([AS_MESSAGE_LOG_FD], [])dnl
AC_MSG_ERROR([path to source, $srcdir, contains spaces])
m4_popdef([AS_MESSAGE_LOG_FD])dnl
;;
esac
ac_subdirs_all=`cd $srcdir && echo */configure | sed 's,/configure,,g'`
2008-01-30 14:36:35 +01:00
])
1997-08-22 00:57:35 +02:00
################################################################################
srcname="gnu development package"
# This gets set non-empty for some net releases of packages.
appdirs=""
2002-06-20 01:39:42 +02:00
# Define is_cross_compiler to save on calls to 'test'.
is_cross_compiler=
if test x"${host}" = x"${target}" ; then
is_cross_compiler=no
else
is_cross_compiler=yes
fi
2003-07-28 05:25:51 +02:00
# Find the build and target subdir names.
2003-05-18 17:43:44 +02:00
GCC_TOPLEV_SUBDIRS
2009-09-22 20:00:15 +02:00
# Be sure to cover against remnants of an in-tree build.
if test $srcdir != . && test -d $srcdir/host-${host_noncanonical}; then
AC_MSG_ERROR([building out of tree but $srcdir contains host-${host_noncanonical}.
Use a pristine source tree when building in a separate tree])
fi
1998-09-30 01:50:57 +02:00
2002-07-01 23:01:48 +02:00
# Skipdirs are removed silently.
skipdirs=
# Noconfigdirs are removed loudly.
noconfigdirs=""
1997-08-22 00:57:35 +02:00
2002-07-01 23:01:48 +02:00
use_gnu_ld=
# Make sure we don't let GNU ld be added if we didn't want it.
if test x$with_gnu_ld = xno ; then
use_gnu_ld=no
2008-03-21 16:40:16 +01:00
noconfigdirs="$noconfigdirs ld gold"
1997-08-22 00:57:35 +02:00
fi
2002-07-01 23:01:48 +02:00
use_gnu_as=
# Make sure we don't let GNU as be added if we didn't want it.
if test x$with_gnu_as = xno ; then
use_gnu_as=no
noconfigdirs="$noconfigdirs gas"
1997-08-22 00:57:35 +02:00
fi
2009-10-03 23:10:11 +02:00
use_included_zlib=
2015-07-14 17:22:24 +02:00
AC_ARG_WITH(system-zlib,
[AS_HELP_STRING([--with-system-zlib], [use installed libz])])
2009-10-03 23:10:11 +02:00
# Make sure we don't let ZLIB be added if we didn't want it.
if test x$with_system_zlib = xyes ; then
use_included_zlib=no
noconfigdirs="$noconfigdirs zlib"
fi
2002-07-01 23:01:48 +02:00
# some tools are so dependent upon X11 that if we're not building with X,
# it's not even worth trying to configure, much less build, that tool.
1997-08-22 00:57:35 +02:00
2002-07-01 23:01:48 +02:00
case ${with_x} in
yes | "") ;; # the default value for this tree is that X11 is available
2002-07-04 00:50:35 +02:00
no)
2004-08-13 01:00:39 +02:00
skipdirs="${skipdirs} tk itcl libgui"
2002-07-04 00:50:35 +02:00
# We won't be able to build gdbtk without X.
enable_gdbtk=no
;;
2002-07-01 23:01:48 +02:00
*) echo "*** bad value \"${with_x}\" for -with-x flag; ignored" 1>&2 ;;
esac
1997-08-22 00:57:35 +02:00
2011-03-25 14:06:37 +01:00
# Some are only suitable for cross toolchains.
2002-09-25 00:51:57 +02:00
# Remove these if host=target.
cross_only="target-libgloss target-newlib target-opcodes"
1997-08-22 00:57:35 +02:00
2002-07-01 23:01:48 +02:00
case $is_cross_compiler in
no) skipdirs="${skipdirs} ${cross_only}" ;;
esac
1997-08-22 00:57:35 +02:00
2002-06-20 01:47:43 +02:00
# If both --with-headers and --with-libs are specified, default to
# --without-newlib.
2004-09-29 13:41:17 +02:00
if test x"${with_headers}" != x && test x"${with_headers}" != xno \
&& test x"${with_libs}" != x && test x"${with_libs}" != xno ; then
2002-06-20 01:47:43 +02:00
if test x"${with_newlib}" = x ; then
with_newlib=no
fi
fi
# Recognize --with-newlib/--without-newlib.
case ${with_newlib} in
no) skipdirs="${skipdirs} target-newlib" ;;
yes) skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'` ;;
esac
[PATCH 1/7] OpenMP 4.0 offloading infrastructure: configure and make
* configure: Regenerate.
* configure.ac (--enable-as-accelerator-for)
(--enable-offload-targets): New configure options.
gcc/
* Makefile.in (real_target_noncanonical, accel_dir_suffix)
(enable_as_accelerator): New variables substituted by configure.
(libsubdir, libexecsubdir, unlibsubdir): Tweak for the possibility of
being configured as an offload compiler.
(DRIVER_DEFINES): Pass new defines DEFAULT_REAL_TARGET_MACHINE and
ACCEL_DIR_SUFFIX.
(install-cpp, install-common, install_driver, install-gcc-ar): Do not
install for the offload compiler.
* config.in: Regenerate.
* configure: Regenerate.
* configure.ac (real_target_noncanonical, accel_dir_suffix)
(enable_as_accelerator): Compute new variables.
(ACCEL_COMPILER): Define if the compiler is built as the accel compiler.
(OFFLOAD_TARGETS): List of target names suitable for offloading.
(ENABLE_OFFLOADING): Define if list of offload targets is not empty.
gcc/cp/
* Make-lang.in (c++.install-common): Do not install for the offload
compiler.
gcc/doc/
* install.texi (Options specification): Document
--enable-as-accelerator-for and --enable-offload-targets.
gcc/fortran/
* Make-lang.in (fortran.install-common): Do not install for the offload
compiler.
libgcc/
* Makefile.in (crtoffloadbegin$(objext)): New rule.
(crtoffloadend$(objext)): Likewise.
* configure: Regenerate.
* configure.ac (accel_dir_suffix): Compute new variable.
(extra_parts): Add crtoffloadbegin.o and crtoffloadend.o
if enable_offload_targets is not empty.
* offloadstuff.c: New file.
libgomp/
* config.h.in: Regenerate.
* configure: Regenerate.
* configure.ac: Check for libdl, required for plugin support.
(PLUGIN_SUPPORT): Define if plugins are supported.
(enable_offload_targets): Support Intel MIC targets.
(OFFLOAD_TARGETS): List of target names suitable for offloading.
lto-plugin/
* Makefile.am (libexecsubdir): Tweak for the possibility of being
configured for offload compiler.
(accel_dir_suffix, real_target_noncanonical): New variables substituted
by configure.
* Makefile.in: Regenerate.
* configure: Regenerate.
* configure.ac (accel_dir_suffix, real_target_noncanonical): Compute new
variables.
Co-Authored-By: Andrey Turetskiy <andrey.turetskiy@intel.com>
Co-Authored-By: Ilya Verbin <ilya.verbin@intel.com>
Co-Authored-By: Thomas Schwinge <thomas@codesourcery.com>
From-SVN: r217485
2014-11-13 14:28:56 +01:00
AC_ARG_ENABLE(as-accelerator-for,
[AS_HELP_STRING([--enable-as-accelerator-for=ARG],
[build as offload target compiler.
2014-12-15 11:54:43 +01:00
Specify offload host triple by ARG])])
[PATCH 1/7] OpenMP 4.0 offloading infrastructure: configure and make
* configure: Regenerate.
* configure.ac (--enable-as-accelerator-for)
(--enable-offload-targets): New configure options.
gcc/
* Makefile.in (real_target_noncanonical, accel_dir_suffix)
(enable_as_accelerator): New variables substituted by configure.
(libsubdir, libexecsubdir, unlibsubdir): Tweak for the possibility of
being configured as an offload compiler.
(DRIVER_DEFINES): Pass new defines DEFAULT_REAL_TARGET_MACHINE and
ACCEL_DIR_SUFFIX.
(install-cpp, install-common, install_driver, install-gcc-ar): Do not
install for the offload compiler.
* config.in: Regenerate.
* configure: Regenerate.
* configure.ac (real_target_noncanonical, accel_dir_suffix)
(enable_as_accelerator): Compute new variables.
(ACCEL_COMPILER): Define if the compiler is built as the accel compiler.
(OFFLOAD_TARGETS): List of target names suitable for offloading.
(ENABLE_OFFLOADING): Define if list of offload targets is not empty.
gcc/cp/
* Make-lang.in (c++.install-common): Do not install for the offload
compiler.
gcc/doc/
* install.texi (Options specification): Document
--enable-as-accelerator-for and --enable-offload-targets.
gcc/fortran/
* Make-lang.in (fortran.install-common): Do not install for the offload
compiler.
libgcc/
* Makefile.in (crtoffloadbegin$(objext)): New rule.
(crtoffloadend$(objext)): Likewise.
* configure: Regenerate.
* configure.ac (accel_dir_suffix): Compute new variable.
(extra_parts): Add crtoffloadbegin.o and crtoffloadend.o
if enable_offload_targets is not empty.
* offloadstuff.c: New file.
libgomp/
* config.h.in: Regenerate.
* configure: Regenerate.
* configure.ac: Check for libdl, required for plugin support.
(PLUGIN_SUPPORT): Define if plugins are supported.
(enable_offload_targets): Support Intel MIC targets.
(OFFLOAD_TARGETS): List of target names suitable for offloading.
lto-plugin/
* Makefile.am (libexecsubdir): Tweak for the possibility of being
configured for offload compiler.
(accel_dir_suffix, real_target_noncanonical): New variables substituted
by configure.
* Makefile.in: Regenerate.
* configure: Regenerate.
* configure.ac (accel_dir_suffix, real_target_noncanonical): Compute new
variables.
Co-Authored-By: Andrey Turetskiy <andrey.turetskiy@intel.com>
Co-Authored-By: Ilya Verbin <ilya.verbin@intel.com>
Co-Authored-By: Thomas Schwinge <thomas@codesourcery.com>
From-SVN: r217485
2014-11-13 14:28:56 +01:00
AC_ARG_ENABLE(offload-targets,
[AS_HELP_STRING([--enable-offload-targets=LIST],
[enable offloading to devices from comma-separated LIST of
TARGET[=DIR]. Use optional path to find offload target compiler
during the build])],
[
if test x"$enable_offload_targets" = x; then
AC_MSG_ERROR([no offload targets specified])
fi
], [enable_offload_targets=])
2010-11-23 14:23:42 +01:00
# Handle --enable-gold, --enable-ld.
# --disable-gold [--enable-ld]
# Build only ld. Default option.
2010-11-23 19:09:34 +01:00
# --enable-gold [--enable-ld]
# Build both gold and ld. Install gold as "ld.gold", install ld
# as "ld.bfd" and "ld".
# --enable-gold=default [--enable-ld]
2010-11-23 14:23:42 +01:00
# Build both gold and ld. Install gold as "ld.gold" and "ld",
# install ld as "ld.bfd".
# --enable-gold[=default] --disable-ld
# Build only gold, which is then installed as both "ld.gold" and "ld".
# --enable-gold --enable-ld=default
2010-11-23 19:09:34 +01:00
# Build both gold (installed as "ld.gold") and ld (installed as "ld"
# and ld.bfd).
2010-11-23 14:23:42 +01:00
# In other words, ld is default
# --enable-gold=default --enable-ld=default
# Error.
default_ld=
2008-03-21 16:40:16 +01:00
AC_ARG_ENABLE(gold,
2011-01-21 14:18:23 +01:00
[AS_HELP_STRING([[--enable-gold[=ARG]]],
[build gold @<:@ARG={default,yes,no}@:>@])],
2008-03-21 16:40:16 +01:00
ENABLE_GOLD=$enableval,
ENABLE_GOLD=no)
2010-11-23 14:23:42 +01:00
case "${ENABLE_GOLD}" in
yes|default)
2010-04-27 16:27:15 +02:00
# Check for ELF target.
is_elf=no
case "${target}" in
*-*-elf* | *-*-sysv4* | *-*-unixware* | *-*-eabi* | hppa*64*-*-hpux* \
2012-12-16 08:24:29 +01:00
| *-*-linux* | *-*-gnu* | frv-*-uclinux* | *-*-irix5* | *-*-irix6* \
2011-03-28 13:21:17 +02:00
| *-*-netbsd* | *-*-openbsd* | *-*-freebsd* | *-*-dragonfly* \
2012-11-15 01:38:07 +01:00
| *-*-solaris2* | *-*-nto* | *-*-nacl*)
2010-04-27 16:27:15 +02:00
case "${target}" in
*-*-linux*aout* | *-*-linux*oldld*)
;;
*)
is_elf=yes
;;
esac
esac
if test "$is_elf" = "yes"; then
# Check for target supported by gold.
2008-03-21 16:40:16 +01:00
case "${target}" in
2014-10-03 19:38:00 +02:00
i?86-*-* | x86_64-*-* | sparc*-*-* | powerpc*-*-* | arm*-*-* \
2016-03-17 23:54:19 +01:00
| aarch64*-*-* | tilegx*-*-* | mips*-*-* | s390*-*-*)
2010-11-23 14:23:42 +01:00
configdirs="$configdirs gold"
if test x${ENABLE_GOLD} = xdefault; then
default_ld=gold
fi
2010-04-27 16:27:15 +02:00
ENABLE_GOLD=yes
2008-03-21 16:40:16 +01:00
;;
esac
2010-04-27 16:27:15 +02:00
fi
;;
no)
;;
*)
AC_MSG_ERROR([invalid --enable-gold argument])
;;
2010-11-23 14:23:42 +01:00
esac
AC_ARG_ENABLE(ld,
2011-01-21 14:18:23 +01:00
[AS_HELP_STRING([[--enable-ld[=ARG]]],
[build ld @<:@ARG={default,yes,no}@:>@])],
2010-11-23 14:23:42 +01:00
ENABLE_LD=$enableval,
ENABLE_LD=yes)
case "${ENABLE_LD}" in
default)
2010-11-23 19:09:34 +01:00
if test x${default_ld} != x; then
2010-11-23 14:23:42 +01:00
AC_MSG_ERROR([either gold or ld can be the default ld])
fi
;;
yes)
;;
no)
if test x${ENABLE_GOLD} != xyes; then
AC_MSG_WARN([neither ld nor gold are enabled])
fi
configdirs=`echo " ${configdirs} " | sed -e 's/ ld / /'`
;;
*)
AC_MSG_ERROR([invalid --enable-ld argument])
;;
esac
2008-03-21 16:40:16 +01:00
Add --enable-compressed-debug-sections={all,gas,gold,ld}
This patch removes the gas configure option:
--enable-compressed-debug-sections
and adds a toplevel configure option:
--enable-compressed-debug-sections={all,gas,gold,ld}
to enable compressed debug sections for gas, gold or ld by default. At
the moment, this configure option is ignored by gold and ld. For x86
Linux targets, default to compressing debug sections in gas.
Sync with binutils-gdb:
PR gas/19109
* configure.ac: Add
--enable-compressed-debug-sections={all,gas,gold,ld}.
* configure: Regenerated.
From-SVN: r229088
2015-10-20 18:29:28 +02:00
# PR gas/19109
# Decide the default method for compressing debug sections.
# Provide a configure time option to override our default.
AC_ARG_ENABLE(compressed_debug_sections,
2016-01-12 17:27:09 +01:00
[AS_HELP_STRING([--enable-compressed-debug-sections={all,gas,gold,ld,none}],
Add --enable-compressed-debug-sections={all,gas,gold,ld}
This patch removes the gas configure option:
--enable-compressed-debug-sections
and adds a toplevel configure option:
--enable-compressed-debug-sections={all,gas,gold,ld}
to enable compressed debug sections for gas, gold or ld by default. At
the moment, this configure option is ignored by gold and ld. For x86
Linux targets, default to compressing debug sections in gas.
Sync with binutils-gdb:
PR gas/19109
* configure.ac: Add
--enable-compressed-debug-sections={all,gas,gold,ld}.
* configure: Regenerated.
From-SVN: r229088
2015-10-20 18:29:28 +02:00
[Enable compressed debug sections for gas, gold or ld by
default])],
[
if test x"$enable_compressed_debug_sections" = xyes; then
AC_MSG_ERROR([no program with compressed debug sections specified])
fi
], [enable_compressed_debug_sections=])
1997-08-22 00:57:35 +02:00
# Configure extra directories which are host specific
case "${host}" in
2002-07-01 23:01:48 +02:00
*-cygwin*)
2002-12-16 19:23:00 +01:00
configdirs="$configdirs libtermcap" ;;
1997-08-22 00:57:35 +02:00
esac
2005-06-07 01:39:28 +02:00
# A target can indicate whether a language isn't supported for some reason.
# Only spaces may be used in this macro; not newlines or tabs.
unsupported_languages=
1997-08-22 00:57:35 +02:00
# Remove more programs from consideration, based on the host or
# target this usually means that a port of the program doesn't
# exist yet.
case "${host}" in
* configure.ac (i[[3456789]]86-*-vsta, i[[3456789]]86-*-go32*,
i[[3456789]]86-*-beos*, powerpc-*-beos*, m68k-hp-hpux*,
m68k-apollo-sysv*, m68k-apollo-bsd*, m88k-dg-dgux*,
m88k-harris-cxux*, m88k-motorola-sysv*, mips*-dec-ultrix*,
mips*-nec-sysv4*, mips*-sgi-irix4*, mips*-*-sysv4*, mips*-*-sysv*,
i370-ibm-opened*, i[[3456789]]86-*-sysv5*, i[[3456789]]86-*-dgux*,
i[[3456789]]86-ncr-sysv4.3*, i[[3456789]]86-ncr-sysv4*,
i[[3456789]]86-*-sco3.2v5*, i[[3456789]]86-*-sco*,
i[[3456789]]86-*-udk*, vax-*-ultrix2*, m68k-sun-sunos*,
hppa*-*-hiux*, *-*-hiux*, rs6000-*-lynxos*, *-*-sysv4*,
*-*-rhapsody*): Remove host cases.
* configure: Regenerate.
config:
* mh-cxux, mh-decstation, mh-dgux386, mh-lynxrs6k, mh-ncr3000,
mh-necv4, mh-sco, mh-sysv5: Remove.
From-SVN: r171412
2011-03-24 17:49:56 +01:00
i[[3456789]]86-*-msdosdjgpp*)
2011-03-28 15:13:05 +02:00
noconfigdirs="$noconfigdirs tcl tk itcl"
1998-10-12 12:44:57 +02:00
;;
1997-08-22 00:57:35 +02:00
esac
2004-05-13 08:41:07 +02:00
2010-12-10 11:55:56 +01:00
AC_ARG_ENABLE(libquadmath,
AS_HELP_STRING([--disable-libquadmath],
[do not build libquadmath directory]),
ENABLE_LIBQUADMATH=$enableval,
ENABLE_LIBQUADMATH=yes)
if test "${ENABLE_LIBQUADMATH}" = "no" ; then
noconfigdirs="$noconfigdirs target-libquadmath"
fi
AC_ARG_ENABLE(libquadmath-support,
AS_HELP_STRING([--disable-libquadmath-support],
[disable libquadmath support for Fortran]),
ENABLE_LIBQUADMATH_SUPPORT=$enableval,
ENABLE_LIBQUADMATH_SUPPORT=yes)
enable_libquadmath_support=
if test "${ENABLE_LIBQUADMATH_SUPPORT}" = "no" ; then
enable_libquadmath_support=no
fi
2004-02-10 11:54:48 +01:00
AC_ARG_ENABLE(libada,
2011-01-21 14:18:23 +01:00
[AS_HELP_STRING([--enable-libada], [build libada directory])],
2004-02-10 11:54:48 +01:00
ENABLE_LIBADA=$enableval,
ENABLE_LIBADA=yes)
if test "${ENABLE_LIBADA}" != "yes" ; then
(top level)
Merged from libada-gnattools-branch:
2004-11-28 Nathanael Nerode <neroden@gcc.gnu.org>
* gnattools: New directory.
* Makefile.def: Add gnattools as a module, depending on target-libada.
* Makefile.in: Regenerate.
* configure.in: Include gnattools in host_tools; disable it if ada
is disabled.
* configure: Regenerate.
(gcc)
* configure.ac: Rename cc_for_cross_gnattools to host_cc_for_libada.
* configure: Regenerate.
* libada-mk.in: Remove CC; rename
cc_for_cross_gnattools / cc_set_by_configure to host_cc_for_libada.
(gcc/ada)
Partial merge from libada-gnattools-branch:
2004-12-02 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Move gnattools{1,1re,2,3,4} and corresponding flags
into code in gnattools/Makefile.in. Remove direct dependencies on
stamp-tools by tools clauses.
2004-12-02 Nathanael Nerode <neroden@gcc.gnu.org>
* config-lang.in: Add gnattools to $lang_dirs.
(libada)
2004-12-03 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Add stamp file for building libada, to avoid
duplicate builds every time all-gnattools is called.
2004-12-02 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Build gcc/ada/Makefile (by running gcc/ada/configure)
here.
2004-08-16 Nathanael Nerode <neroden@gcc.gnu.org>
* configure.ac: Replace AC_CANONICAL_SYSTEM with _BUILD, _HOST,
_TARGET.
* configure: Regenerate.
2004-07-18 Nathanael Nerode <neroden@gcc.gnu.org>
* configure.ac, Makefile.in: Remove gnattools-specific code
(see gnattools directory).
* Makefile.in: Remove dead rts-* targets.
* configure: Regenerate.
(gnattools)
2005-02-02 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Remove use of cc_set_by_configure; just use
plain old CC from the top level in this case.
2005-01-30 Nathanael Nerode <neroden@gcc.gnu.org>
Merge from mainline at tag libada-gnattools-merge-20050129:
* configure.ac: Changes propagated from gcc/ada/Makefile.in.
* Makefile.in: Changes relocated from gcc/ada/Makefile.in.
2004-12-13 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Reinstate stamp-gnatlib check.
2004-12-02 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Inline gnattools{1,1-re,2,3,4} targets from
gcc/ada/configure.ac into gnattools-native and gnattools-cross
targets, collecting flags as appropriate from here,
gcc/ada/Makefile.in, gcc/ada/configure.ac, etc. Attempt to retain
identical behavior.
* configure.ac: Add necessary configure bits from
gcc/ada/configure.ac.
* configure: Regenerate.
2004-08-16 Nathanael Nerode <neroden@gcc.gnu.org>
* configure.ac: Replace AC_CANONICAL_SYSTEM with _BUILD, _HOST,
_TARGET. Replace _GCC_TOPLEV_NONCANONICAL_TARGET with
ACX_NONCANONICAL_TARGET, and replace now-redundant AC_SUBST.
* configure: Regenerate.
2004-07-18 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in, configure.ac: Remove libada-specific targets and
variables.
* configure: Regenerate.
* New directory, cloned from libada.
From-SVN: r95594
2005-02-26 22:43:33 +01:00
noconfigdirs="$noconfigdirs gnattools"
2004-02-10 11:54:48 +01:00
fi
2005-07-06 23:26:23 +02:00
AC_ARG_ENABLE(libssp,
2011-01-21 14:18:23 +01:00
[AS_HELP_STRING([--enable-libssp], [build libssp directory])],
2005-07-06 23:26:23 +02:00
ENABLE_LIBSSP=$enableval,
ENABLE_LIBSSP=yes)
2012-11-03 16:53:28 +01:00
AC_ARG_ENABLE(libstdcxx,
AS_HELP_STRING([--disable-libstdcxx],
[do not build libstdc++-v3 directory]),
ENABLE_LIBSTDCXX=$enableval,
ENABLE_LIBSTDCXX=default)
[if test "${ENABLE_LIBSTDCXX}" = "no" ; then
2014-05-30 19:16:14 +02:00
noconfigdirs="$noconfigdirs target-libstdc++-v3"
2012-11-03 16:53:28 +01:00
fi]
2014-11-13 15:03:17 +01:00
# If this is accelerator compiler and its target is intelmic we enable
# target liboffloadmic by default. If this is compiler with offloading
# for intelmic we enable host liboffloadmic by default. Otherwise
# liboffloadmic is disabled by default.
AC_ARG_ENABLE([liboffloadmic],
AC_HELP_STRING([[--enable-liboffloadmic[=ARG]]],
[build liboffloadmic @<:@ARG={no,host,target}@:>@]),
[case "$enableval" in
no | host | target)
enable_liboffloadmic=$enableval ;;
*)
AC_MSG_ERROR([--enable-liboffloadmic=no/host/target]) ;;
esac],
2014-12-15 11:54:43 +01:00
[if test x"$enable_as_accelerator_for" != x; then
2014-11-13 15:03:17 +01:00
case "${target}" in
*-intelmic-* | *-intelmicemul-*)
enable_liboffloadmic=target
extra_liboffloadmic_configure_flags="--enable-liboffloadmic=target"
;;
*)
enable_liboffloadmic=no
;;
esac
else
case "${enable_offload_targets}" in
*-intelmic-* | *-intelmicemul-*)
enable_liboffloadmic=host
extra_liboffloadmic_configure_flags="--enable-liboffloadmic=host"
;;
*)
enable_liboffloadmic=no
;;
esac
fi])
AC_SUBST(extra_liboffloadmic_configure_flags)
2015-08-10 17:53:33 +02:00
# Enable libgomp by default on hosted POSIX systems, and a few others.
2006-03-10 22:32:39 +01:00
if test x$enable_libgomp = x ; then
[multiple changes]
2006-01-18 Richard Henderson <rth@redhat.com>
Jakub Jelinek <jakub@redhat.com>
Diego Novillo <dnovillo@redhat.com>
* libgomp: New directory.
* Makefile.def: Add target_module libgomp.
* Makefile.in: Regenerate.
* configure.in (target_libraries): Add target-libgomp.
* configure: Regenerate.
contrib/
2006-01-18 Richard Henderson <rth@redhat.com>
Diego Novillo <dnovillo@redhat.com>
* gcc_update (files_and_dependencies): Add libgomp files.
gcc/
2006-01-18 Richard Henderson <rth@redhat.com>
Aldy Hernandez <aldyh@redhat.com>
Jakub Jelinek <jakub@redhat.com>
Diego Novillo <dnovillo@redhat.com>
* omp-low.c: New file.
* c-omp.c: New file.
2006-01-18 Richard Henderson <rth@redhat.com>
Jakub Jelinek <jakub@redhat.com>
Diego Novillo <dnovillo@redhat.com>
* doc/invoke.texi: Document -fopenmp.
* tree-dump.h (debug_function): Declare.
* hooks.c (hook_bool_tree_bool_false): New function.
(hook_tree_tree_null): Remove.
(hook_tree_tree_tree_null): New.
* hooks.h: Update to match.
* tree-pretty-print.c (debug_tree_chain): New.
(print_generic_expr): Handle TDF_CHAIN.
(dump_generic_node): Handle BLOCK.
Do not abort with incomplete SWITCH_EXPRs.
Do not dump body of an OpenMP directive if TDF_SLIM is given.
<case OMP_PARALLEL, OMP_FOR, OMP_SECTIONS>: Don't
print space after directive name.
<OMP_FOR>: Handle printing OMP_FOR_PRE_BODY.
Handle OMP_MASTER and OMP_ORDERED.
Handle printing of OMP_BODY just in one place, goto
dump_omp_body in the rest of OMP_* nodes that have
OMP_BODY.
Don't handle clause nodes here. Update omp statements to
use dump_omp_clauses.
Handle OMP_SINGLE, OMP_SECTIONS, OMP_SECTION,
OMP_CLAUSE_ORDERED, OMP_CLAUSE_SCHEDULE, OMP_ATOMIC,
OMP_CRITICAL, OMP_CLAUSE_NOWAIT, GOMP_CLAUSE_IF,
GOMP_CLAUSE_NUM_THREADS, GOMP_FOR, GOMP_CLAUSE_SHARED,
GOMP_CLAUSE_FIRSTPRIVATE, GOMP_CLAUSE_LASTPRIVATE,
GOMP_CLAUSE_COPYIN and GOMP_CLAUSE_COPYPRIVATE.
Adjust output for GOMP_PARALLEL.
(dump_omp_clauses): New.
(print_declaration): Dump DECL_VALUE_EXPR.
(op_symbol_1): Split out of op_symbol.
(dumping_stmts): Remove. Update all users.
* cgraph.c (cgraph_analyze_queue): New.
(cgraph_add_new_function): New.
* cgraph.h (cgraph_analyze_queue): Declare.
(cgraph_add_new_function): Declare.
(cgraph_lower_function): Remove.
* tree.c (walk_tree): Walk OMP_CLAUSE_CHAIN of OMP_CLAUSE_*
nodes. Use switch for all nodes, handle most of IS_EXPR_CODE_CLASS
and TYPE_P nodes in its default clause.
(empty_body_p): New.
(tree_range_check_failed): New.
(build5_stat): New.
* tree.h (OMP_CLAUSE_REDUCTION_INIT,
OMP_CLAUSE_REDUCTION_MERGE,
OMP_CLAUSE_REDUCTION_PLACEHOLDER,
OMP_CLAUSE_PRIVATE_DEBUG,
OMP_CLAUSE_LASTPRIVATE_FIRSTPRIVATE, OMP_FOR_PRE_BODY,
OMP_MASTER_BODY, OMP_ORDERED_BODY OMP_BODY,
OMP_CLAUSES, OMP_CLAUSE_DECL, OMP_CLAUSE_DEFAULT_KIND,
OMP_CLAUSE_CHAIN, OMP_CLAUSE_OUTER_DECL,
OMP_CLAUSE_INNER_DECL, OMP_CLAUSE_NUM_THREADS_EXPR,
OMP_CLAUSE_IF_EXPR, OMP_CLAUSE_SCHEDULE_CHUNK_EXPR,
OMP_CLAUSE_SCHEDULE_CHUNK_SIZE. OMP_PARALLEL_VAR_INIT,
OMP_PARALLEL_VAR_REDUC, OMP_FOR_VAR_INIT,
OMP_FOR_VAR_LAST, OMP_FOR_VAR_REDUC,
OMP_SECTIONS_VAR_INIT, OMP_SECTIONS_VAR_LAST,
OMP_SECTIONS_VAR_REDUC, OMP_CLAUSE_REDUCTION_CODE
OMP_SINGLE_CLAUSES, OMP_SINGLE_BODY,
OMP_CLAUSE_SCHEDULE_CHUNK_SIZE, OMP_SECTION_BODY,
OMP_CRITICAL_NAME, OMP_CRITICAL_BODY): New.
(TREE_RANGE_CHECK): New.
(empty_body_p): Declare.
(enum omp_clause_default_kind): New.
(build_string_literal): Declare.
(enum omp_clause_schedule_kind, OMP_CLAUSE_SCHEDULE_KIND): New.
(build5_stat, build5): Declare.
* tree-pass.h (TDF_CHAIN): Define.
* tree-pass.h (PROP_gimple_lomp): Define.
(pass_lower_omp): Declare.
* diagnostic.h (debug_tree_chain): Declare.
* builtins.c (get_builtin_sync_mode): Use 0 as last argument to
mode_for_size.
(expand_builtin): Handle sync BUILT_IN_*_16 builtins.
* builtins.c (build_string_literal): Make extern.
* gcc.c (include_spec_function): New.
(static_spec_functions): Add it.
(main): Move load of libgomp.spec ...
(LINK_COMMAND_SPEC): ... here.
(link_gomp_spec): New.
(static_specs): Include it.
(LINK_COMMAND_SPEC): Add link_gomp.
(GOMP_SELF_SPECS): New.
(driver_self_specs): Include it.
(switch_matches): Don't mark inline.
(main): Load libgomp.spec.
* tree-gimple.c (is_gimple_stmt): True for OMP_MASTER,
OMP_ORDERED, OMP_CRITICAL, OMP_SECTIONS, OMP_SECTION,
and OMP_SINGLE, OMP_FOR and OMP_PARALLEL.
* tree-gimple.h (enum omp_parallel): Declare.
(determine_parallel_type): Declare.
(omp_firstprivatize_variable): Declare.
(omp_reduction_init): Declare.
(diagnose_omp_structured_block_errors): Declare.
(struct walk_stmt_info): Add want_return_expr.
(struct walk_stmt_info): Add want_bind_expr, want_locations.
(find_omp_clause): Declare.
(insert_field_into_struct): Declare.
(struct walk_stmt_info): Move from tree-nested.c
(walk_stmts): Declare.
* c-cppbuiltin.c (c_cpp_builtins): If -fopenmp, #define _OPENMP
to 200505.
* cgraphunit.c (cgraph_lower_function): Make static.
(cgraph_finalize_pending_functions): New.
(cgraph_finalize_function): Call it.
(cgraph_finalize_compilation_unit): Likewise.
* builtin-types.def (BT_I16, BT_FN_I16_VPTR_I16,
BT_FN_BOOL_VPTR_I16_I16, BT_FN_I16_VPTR_I16_I16): Add.
(BT_FN_UINT_UINT): New.
(DEF_FUNCTION_TYPE_6, DEF_FUNCTION_TYPE_7,
DEF_FUNCTION_TYPE_VAR_4): Document.
(BT_PTR_LONG, BT_PTR_PTR, BT_FN_BOOL, BT_FN_INT,
BT_FN_VOID_PTRPTR, BT_PTR_FN_VOID_PTR,
BT_FN_BOOL_LONGPTR_LONGPTR, BT_FN_VOID_OMPFN_PTR_UINT,
BT_FN_VOID_OMPFN_PTR_UINT_UINT,
BT_FN_BOOL_LONG_LONG_LONG_LONGPTR_LONGPTR,
BT_FN_BOOL_LONG_LONG_LONG_LONG_LONGPTR_LONGPTR,
BT_FN_VOID_OMPFN_PTR_UINT_LONG_LONG_LONG,
BT_FN_VOID_OMPFN_PTR_UINT_LONG_LONG_LONG_LONG): New.
* builtins.def: Update DEF_BUILTIN comment to include COND argument.
Move all DEF_SYNC_BUILTIN () and DEF_GOMP_BUILTIN () builtins
into separate files.
(DEF_GOMP_BUILTIN): New.
(BUILT_IN_OMP_GET_THREAD_NUM, BUILT_IN_GOMP_BARRIER,
BUILT_IN_GOMP_CRITICAL_START, BUILT_IN_GOMP_CRITICAL_END,
BUILT_IN_GOMP_CRITICAL_NAME_START, BUILT_IN_GOMP_CRITICAL_NAME_END,
BUILT_IN_GOMP_LOOP_STATIC_START, BUILT_IN_GOMP_LOOP_DYNAMIC_START,
BUILT_IN_GOMP_LOOP_GUIDED_START, BUILT_IN_GOMP_LOOP_RUNTIME_START,
BUILT_IN_GOMP_LOOP_ORDERED_STATIC_START,
BUILT_IN_GOMP_LOOP_ORDERED_DYNAMIC_START,
BUILT_IN_GOMP_LOOP_ORDERED_GUIDED_START,
BUILT_IN_GOMP_LOOP_ORDERED_RUNTIME_START,
BUILT_IN_GOMP_LOOP_STATIC_NEXT, BUILT_IN_GOMP_LOOP_DYNAMIC_NEXT,
BUILT_IN_GOMP_LOOP_GUIDED_NEXT, BUILT_IN_GOMP_LOOP_RUNTIME_NEXT,
BUILT_IN_GOMP_LOOP_ORDERED_STATIC_NEXT,
BUILT_IN_GOMP_LOOP_ORDERED_DYNAMIC_NEXT,
BUILT_IN_GOMP_LOOP_ORDERED_GUIDED_NEXT,
BUILT_IN_GOMP_LOOP_ORDERED_RUNTIME_NEXT,
BUILT_IN_GOMP_PARALLEL_LOOP_STATIC_START,
BUILT_IN_GOMP_PARALLEL_LOOP_DYNAMIC_START,
BUILT_IN_GOMP_PARALLEL_LOOP_GUIDED_START,
BUILT_IN_GOMP_PARALLEL_LOOP_RUNTIME_START,
BUILT_IN_GOMP_LOOP_END, BUILT_IN_GOMP_LOOP_END_NOWAIT,
BUILT_IN_GOMP_ORDERED_START, BUILT_IN_GOMP_ORDERED_END,
BUILT_IN_GOMP_PARALLEL_START, BUILT_IN_GOMP_PARALLEL_END,
BUILT_IN_GOMP_SECTIONS_START, BUILT_IN_GOMP_SECTIONS_NEXT,
BUILT_IN_GOMP_PARALLEL_SECTIONS_START, BUILT_IN_GOMP_SECTIONS_END,
BUILT_IN_GOMP_SECTIONS_END_NOWAIT, BUILT_IN_GOMP_SINGLE_START,
BUILT_IN_GOMP_SINGLE_COPY_START, BUILT_IN_GOMP_SINGLE_COPY_END): New.
* sync-builtins.def: New file, moved from builtins.def.
* omp-builtins.def: New file, moved from builtins.def.
* c-objc-common.h (LANG_HOOKS_OMP_PREDETERMINED_SHARING): Redefine.
* gimple-low.c (lower_function_body): Clear data.
(lower_stmt): Do not handle COMPOUND_EXPR.
Remove call to print_node_brief.
* c-tree.h (c_finish_omp_clauses): New prototype.
(C_DECL_THREADPRIVATE_P): Define.
(lookup_name_no_remap, c_omp_remap_private): Remove
(c_begin_omp_parallel, c_finish_omp_parallel): Update.
(check_for_loop_decls): Update decl.
(lookup_name_no_remap, c_omp_remap_private): Declare.
(build_indirect_ref, build_modify_expr, pushdecl,
pushdecl_top_level): Move to c-common.h.
* dwarf2out.c (loc_descriptor_from_tree_1): Don't set unsignedp
before the switch, but just in the 2 places that need it.
* c-decl.c (diagnose_mismatched_decls): Do not check for
mismatched thread-local attributes when OLDDECL is marked
threadprivate and NEWDECL has no thread-local attributes.
(merge_decls): Merge C_DECL_THREADPRIVATE_P.
(c_gimple_diagnostics_recursively): Rename from
c_warn_unused_result_recursively. Invoke
diagnose_omp_structured_block_errors.
(check_for_loop_decls): Return a singular decl found.
* langhooks.c (lhd_omp_predetermined_sharing): Return
OMP_CLAUSE_DEFAULT_SHARED for DECL_ARTIFICIAL decls.
(lhd_omp_firstprivatize_type_sizes): New.
(lhd_omp_assignment): New.
(lhd_omp_predetermined_sharing): New.
* langhooks.h (struct gimplify_omp_ctx): Forward declare.
(struct lang_hooks_for_types): Add
omp_firstprivatize_type_sizes, omp_privatize_by_reference,
omp_predetermined_sharing, omp_disregard_value_expr,
omp_private_debug_clause, omp_clause_default_ctor,
omp_clause_copy_ctor, omp_clause_assign_op, omp_clause_dtor.
(c_finish_omp_clauses): New.
(c_finish_bc_stmt): Diagnose break within omp for.
(c_begin_omp_parallel, c_finish_omp_parallel): New.
(build_unary_op): Return error_mark after reporting
a readonly_error.
(build_modify_expr): Likewise.
* gimplify.c: Include optabs.h and pointer-set.h.
(enum gimplify_omp_var_data): Declare.
(struct gimplify_omp_ctx): Declare.
(struct gimplify_ctx): Add fields prev_context, combined_pre_p
and combined_ctxp.
(gimplify_ctxp, gimplify_omp_ctxp): New local variables.
(push_gimplify_context, pop_gimplify_context): Allow nesting.
(splay_tree_compare_decl_uid): New.
(new_omp_context): New.
(delete_omp_context): New.
(gimple_add_tmp_var): Call omp_add_variable.
(gimplify_bind_expr): Likewise.
(gimplify_var_or_parm_decl): If omp_notice_variable returned
true, disregard DECL_VALUE_EXPR on the decl if any.
(gimplify_expr_in_ctx): New.
(omp_firstprivatize_variable, omp_firstprivatize_type_sizes
omp_add_variable, omp_notice_variable, omp_is_private
gimplify_scan_omp_clauses, gimplify_adjust_omp_clauses_1
gimplify_adjust_omp_clauses, gimplify_omp_parallel
gimplify_omp_for, gimplify_omp_workshare, goa_lhs_expr_p
gimplify_omp_atomic_fetch_op, goa_stabilize_expr
gimplify_omp_atomic_pipeline, gimplify_omp_atomic_mutex
gimplify_omp_atomic): New.
(gimplify_expr): Handle OMP_PARALLEL, OMP_FOR, OMP_SECTIONS,
OMP_SINGLE, OMP_SECTION, OMP_MASTER, OMP_ORDERED,
OMP_CRITICAL and OMP_ATOMIC.
(gimplify_body): Verify gimplify_ctxp is empty after gimplification.
* c-pragma.h (enum pragma_kind): Add
PRAGMA_OMP_ATOMIC, PRAGMA_OMP_BARRIER,
PRAGMA_OMP_CRITICAL, PRAGMA_OMP_FLUSH, PRAGMA_OMP_FOR,
PRAGMA_OMP_MASTER, PRAGMA_OMP_ORDERED,
PRAGMA_OMP_PARALLEL, PRAGMA_OMP_PARALLEL_FOR,
PRAGMA_OMP_PARALLEL_SECTIONS, PRAGMA_OMP_SECTION,
PRAGMA_OMP_SECTIONS, PRAGMA_OMP_SINGLE,
PRAGMA_OMP_THREADPRIVATE.
* tree.def (OMP_PARALLEL, OMP_FOR, OMP_SECTIONS,
OMP_SINGLE, OMP_SECTION, OMP_MASTER, OMP_ORDERED,
OMP_CRITICAL, OMP_ATOMIC, OMP_CLAUSE_PRIVATE,
OMP_CLAUSE_SHARED, OMP_CLAUSE_FIRSTPRIVATE,
OMP_CLAUSE_LASTPRIVATE, OMP_CLAUSE_REDUCTION,
OMP_CLAUSE_COPYIN, OMP_CLAUSE_COPYPRIVATE,
OMP_CLAUSE_IF, OMP_CLAUSE_NUM_THREADS,
OMP_CLAUSE_SCHEDULE, OMP_CLAUSE_NOWAIT,
OMP_CLAUSE_ORDERED, OMP_CLAUSE_DEFAULT): Define.
* print-tree.c (print_node): Dump DECL_VALUE_EXPR.
* tree-ssa-dce.c (find_control_dependence): Do not assume that
ENTRY_BLOCK_PTR->next_bb == single_succ (ENTRY_BLOCK_PTR).
* tree-nested.c (convert_call_expr): Call walk_body on OMP_BODY for
OpenMP directives.
(struct nesting_info): Add field_map,
suppress_expansion, debug_var_chain.
(create_nesting_tree): Initialize them.
(lookup_field_for_decl): Use field_map.
(get_nonlocal_debug_decl, get_local_debug_decl): New.
(convert_local_omp_clauses): New.
(finalize_nesting_tree_1): Add debug_var_chain to toplevel block.
(walk_body): Split out of walk_function.
(convert_nonlocal_omp_clauses, convert_local_omp_clauses): New.
(convert_nonlocal_reference): Handle omp statements.
(convert_local_reference): Likewise.
(unnest_nesting_tree_1): Split out of finalize_nesting_tree_1.
(unnest_nesting_tree): New.
(lower_nested_functions): Call it.
(insert_field_into_struct): Make extern.
(struct walk_stmt_info): Move to tree-gimple.h.
(walk_stmts): Make extern.
* omp-builtins.def: New file.
* tree-iterator.c (expr_only): Clarify comment.
* c-common.h (pushdecl_top_level, pushdecl,
build_modify_expr, build_indirect_ref,
c_finish_omp_master, c_finish_omp_critical,
c_finish_omp_ordered, c_finish_omp_barrier,
c_finish_omp_atomic, c_finish_omp_flush,
c_finish_omp_for, c_split_parallel_clauses,
omp_clause_default_kind, c_omp_sharing_predetermined,
c_omp_remap_decl): Declare.
* Makefile.in (BUILTINS_DEF): Add omp-builtins.def.
(OBJS-common): Add omp-low.o.
(c-omp.o, omp-low.o): Add.
(gimplify.o): Add dependency on $(OPTABS_H).
(GTFILES): Add omp-low.c.
(gt-stringpool.h): Add.
* tree-cfg.c (set_bb_for_stmt): Do not update the
block-to-labels map if we are currently expanding to RTL.
(tree_node_can_be_shared): Remove unnecessary CONSTANT_CLASS_P
checks.
Handle IDENTIFIER_NODE.
(tree_verify_flow_info): Do not ICE when emitting error
messages about invalid labels.
(dump_function_to_file): Reset CFUN before emitting the body
of the function.
(debug_function): New.
* passes.c (init_optimization_passes): Schedule
pass_lower_omp.
* langhooks-def.h (lhd_omp_predetermined_sharing,
lhd_omp_assignment, lhd_omp_firstprivatize_type_sizes):
Declare.
(LANG_HOOKS_OMP_FIRSTPRIVATIZE_TYPE_SIZES): Define.
(LANG_HOOKS_FOR_TYPES_INITIALIZER): Use it.
(LANG_HOOKS_OMP_PRIVATIZE_BY_REFERENCE,
LANG_HOOKS_OMP_PREDETERMINED_SHARING,
LANG_HOOKS_OMP_DISREGARD_VALUE_EXPR,
LANG_HOOKS_OMP_PRIVATE_DEBUG_CLAUSE,
LANG_HOOKS_OMP_CLAUSE_DEFAULT_CTOR,
LANG_HOOKS_OMP_CLAUSE_COPY_CTOR,
LANG_HOOKS_OMP_CLAUSE_ASSIGN_OP,
LANG_HOOKS_OMP_CLAUSE_DTOR): Define.
(LANG_HOOK_DECLS): Use them.
2006-01-18 Dmitry Kurochkin <dmitry.kurochkin@gmail.com>
Richard Henderson <rth@redhat.com>
Jakub Jelinek <jakub@redhat.com>
Diego Novillo <dnovillo@redhat.com>
* c-parser.c (pragma_omp_clause): Define.
(c_parser_declaration_or_fndef): Document OpenMP syntax.
(c_parser_compound_statement): Likewise.
(c_parser_statement): Likewise.
(c_parser_pragma): Handle omp pragmas.
(OMP_FOR_CLAUSE_MASK, OMP_SECTIONS_CLAUSE_MASK,
OMP_PARALLEL_CLAUSE_MASK, OMP_SINGLE_CLAUSE_MASK): Define.
(c_parser_omp_clause_name, check_no_duplicate_clause,
c_parser_omp_variable_list,
c_parser_omp_var_list_parens, c_parser_omp_clause_copyin,
c_parser_omp_clause_copyprivate,
c_parser_omp_clause_default,
c_parser_omp_clause_firstprivate, c_parser_omp_clause_if,
c_parser_omp_clause_lastprivate,
c_parser_omp_clause_nowait,
c_parser_omp_clause_num_threads,
c_parser_omp_clause_ordered, c_parser_omp_clause_private,
c_parser_omp_clause_reduction,
c_parser_omp_clause_schedule, c_parser_omp_clause_shared,
c_parser_omp_all_clauses, c_parser_omp_structured_block,
c_parser_omp_atomic, c_parser_omp_barrier,
c_parser_omp_critical, c_parser_omp_flush,
c_parser_omp_for_loop, c_parser_omp_for,
c_parser_omp_master, c_parser_omp_ordered,
c_parser_omp_sections_scope, c_parser_omp_sections,
c_parser_omp_parallel, c_parser_omp_single,
c_parser_omp_construct, c_parser_omp_threadprivate): New.
* c-pragma.c (init_pragma): Do omp pragma registration here.
* c.opt (fopenmp): New flag.
2006-01-18 Eric Christopher <echristo@apple.com>
* gcc.c (GOMP_SELF_SPECS): Bracket in #ifndef/#endif.
* config/darwin.h (GOMP_SELF_SPECS): Define.
testsuite/
2006-01-18 Richard Henderson <rth@redhat.com>
Aldy Hernandez <aldyh@redhat.com>
Jakub Jelinek <jakub@redhat.com>
Diego Novillo <dnovillo@redhat.com>
Uros Bizjak <uros@kss-loka.si>
* testsuite/gcc.dg/gomp: New directory.
From-SVN: r109902
2006-01-18 20:21:25 +01:00
case "${target}" in
2009-01-29 19:48:41 +01:00
*-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu | *-*-kopensolaris*-gnu)
[multiple changes]
2006-01-18 Richard Henderson <rth@redhat.com>
Jakub Jelinek <jakub@redhat.com>
Diego Novillo <dnovillo@redhat.com>
* libgomp: New directory.
* Makefile.def: Add target_module libgomp.
* Makefile.in: Regenerate.
* configure.in (target_libraries): Add target-libgomp.
* configure: Regenerate.
contrib/
2006-01-18 Richard Henderson <rth@redhat.com>
Diego Novillo <dnovillo@redhat.com>
* gcc_update (files_and_dependencies): Add libgomp files.
gcc/
2006-01-18 Richard Henderson <rth@redhat.com>
Aldy Hernandez <aldyh@redhat.com>
Jakub Jelinek <jakub@redhat.com>
Diego Novillo <dnovillo@redhat.com>
* omp-low.c: New file.
* c-omp.c: New file.
2006-01-18 Richard Henderson <rth@redhat.com>
Jakub Jelinek <jakub@redhat.com>
Diego Novillo <dnovillo@redhat.com>
* doc/invoke.texi: Document -fopenmp.
* tree-dump.h (debug_function): Declare.
* hooks.c (hook_bool_tree_bool_false): New function.
(hook_tree_tree_null): Remove.
(hook_tree_tree_tree_null): New.
* hooks.h: Update to match.
* tree-pretty-print.c (debug_tree_chain): New.
(print_generic_expr): Handle TDF_CHAIN.
(dump_generic_node): Handle BLOCK.
Do not abort with incomplete SWITCH_EXPRs.
Do not dump body of an OpenMP directive if TDF_SLIM is given.
<case OMP_PARALLEL, OMP_FOR, OMP_SECTIONS>: Don't
print space after directive name.
<OMP_FOR>: Handle printing OMP_FOR_PRE_BODY.
Handle OMP_MASTER and OMP_ORDERED.
Handle printing of OMP_BODY just in one place, goto
dump_omp_body in the rest of OMP_* nodes that have
OMP_BODY.
Don't handle clause nodes here. Update omp statements to
use dump_omp_clauses.
Handle OMP_SINGLE, OMP_SECTIONS, OMP_SECTION,
OMP_CLAUSE_ORDERED, OMP_CLAUSE_SCHEDULE, OMP_ATOMIC,
OMP_CRITICAL, OMP_CLAUSE_NOWAIT, GOMP_CLAUSE_IF,
GOMP_CLAUSE_NUM_THREADS, GOMP_FOR, GOMP_CLAUSE_SHARED,
GOMP_CLAUSE_FIRSTPRIVATE, GOMP_CLAUSE_LASTPRIVATE,
GOMP_CLAUSE_COPYIN and GOMP_CLAUSE_COPYPRIVATE.
Adjust output for GOMP_PARALLEL.
(dump_omp_clauses): New.
(print_declaration): Dump DECL_VALUE_EXPR.
(op_symbol_1): Split out of op_symbol.
(dumping_stmts): Remove. Update all users.
* cgraph.c (cgraph_analyze_queue): New.
(cgraph_add_new_function): New.
* cgraph.h (cgraph_analyze_queue): Declare.
(cgraph_add_new_function): Declare.
(cgraph_lower_function): Remove.
* tree.c (walk_tree): Walk OMP_CLAUSE_CHAIN of OMP_CLAUSE_*
nodes. Use switch for all nodes, handle most of IS_EXPR_CODE_CLASS
and TYPE_P nodes in its default clause.
(empty_body_p): New.
(tree_range_check_failed): New.
(build5_stat): New.
* tree.h (OMP_CLAUSE_REDUCTION_INIT,
OMP_CLAUSE_REDUCTION_MERGE,
OMP_CLAUSE_REDUCTION_PLACEHOLDER,
OMP_CLAUSE_PRIVATE_DEBUG,
OMP_CLAUSE_LASTPRIVATE_FIRSTPRIVATE, OMP_FOR_PRE_BODY,
OMP_MASTER_BODY, OMP_ORDERED_BODY OMP_BODY,
OMP_CLAUSES, OMP_CLAUSE_DECL, OMP_CLAUSE_DEFAULT_KIND,
OMP_CLAUSE_CHAIN, OMP_CLAUSE_OUTER_DECL,
OMP_CLAUSE_INNER_DECL, OMP_CLAUSE_NUM_THREADS_EXPR,
OMP_CLAUSE_IF_EXPR, OMP_CLAUSE_SCHEDULE_CHUNK_EXPR,
OMP_CLAUSE_SCHEDULE_CHUNK_SIZE. OMP_PARALLEL_VAR_INIT,
OMP_PARALLEL_VAR_REDUC, OMP_FOR_VAR_INIT,
OMP_FOR_VAR_LAST, OMP_FOR_VAR_REDUC,
OMP_SECTIONS_VAR_INIT, OMP_SECTIONS_VAR_LAST,
OMP_SECTIONS_VAR_REDUC, OMP_CLAUSE_REDUCTION_CODE
OMP_SINGLE_CLAUSES, OMP_SINGLE_BODY,
OMP_CLAUSE_SCHEDULE_CHUNK_SIZE, OMP_SECTION_BODY,
OMP_CRITICAL_NAME, OMP_CRITICAL_BODY): New.
(TREE_RANGE_CHECK): New.
(empty_body_p): Declare.
(enum omp_clause_default_kind): New.
(build_string_literal): Declare.
(enum omp_clause_schedule_kind, OMP_CLAUSE_SCHEDULE_KIND): New.
(build5_stat, build5): Declare.
* tree-pass.h (TDF_CHAIN): Define.
* tree-pass.h (PROP_gimple_lomp): Define.
(pass_lower_omp): Declare.
* diagnostic.h (debug_tree_chain): Declare.
* builtins.c (get_builtin_sync_mode): Use 0 as last argument to
mode_for_size.
(expand_builtin): Handle sync BUILT_IN_*_16 builtins.
* builtins.c (build_string_literal): Make extern.
* gcc.c (include_spec_function): New.
(static_spec_functions): Add it.
(main): Move load of libgomp.spec ...
(LINK_COMMAND_SPEC): ... here.
(link_gomp_spec): New.
(static_specs): Include it.
(LINK_COMMAND_SPEC): Add link_gomp.
(GOMP_SELF_SPECS): New.
(driver_self_specs): Include it.
(switch_matches): Don't mark inline.
(main): Load libgomp.spec.
* tree-gimple.c (is_gimple_stmt): True for OMP_MASTER,
OMP_ORDERED, OMP_CRITICAL, OMP_SECTIONS, OMP_SECTION,
and OMP_SINGLE, OMP_FOR and OMP_PARALLEL.
* tree-gimple.h (enum omp_parallel): Declare.
(determine_parallel_type): Declare.
(omp_firstprivatize_variable): Declare.
(omp_reduction_init): Declare.
(diagnose_omp_structured_block_errors): Declare.
(struct walk_stmt_info): Add want_return_expr.
(struct walk_stmt_info): Add want_bind_expr, want_locations.
(find_omp_clause): Declare.
(insert_field_into_struct): Declare.
(struct walk_stmt_info): Move from tree-nested.c
(walk_stmts): Declare.
* c-cppbuiltin.c (c_cpp_builtins): If -fopenmp, #define _OPENMP
to 200505.
* cgraphunit.c (cgraph_lower_function): Make static.
(cgraph_finalize_pending_functions): New.
(cgraph_finalize_function): Call it.
(cgraph_finalize_compilation_unit): Likewise.
* builtin-types.def (BT_I16, BT_FN_I16_VPTR_I16,
BT_FN_BOOL_VPTR_I16_I16, BT_FN_I16_VPTR_I16_I16): Add.
(BT_FN_UINT_UINT): New.
(DEF_FUNCTION_TYPE_6, DEF_FUNCTION_TYPE_7,
DEF_FUNCTION_TYPE_VAR_4): Document.
(BT_PTR_LONG, BT_PTR_PTR, BT_FN_BOOL, BT_FN_INT,
BT_FN_VOID_PTRPTR, BT_PTR_FN_VOID_PTR,
BT_FN_BOOL_LONGPTR_LONGPTR, BT_FN_VOID_OMPFN_PTR_UINT,
BT_FN_VOID_OMPFN_PTR_UINT_UINT,
BT_FN_BOOL_LONG_LONG_LONG_LONGPTR_LONGPTR,
BT_FN_BOOL_LONG_LONG_LONG_LONG_LONGPTR_LONGPTR,
BT_FN_VOID_OMPFN_PTR_UINT_LONG_LONG_LONG,
BT_FN_VOID_OMPFN_PTR_UINT_LONG_LONG_LONG_LONG): New.
* builtins.def: Update DEF_BUILTIN comment to include COND argument.
Move all DEF_SYNC_BUILTIN () and DEF_GOMP_BUILTIN () builtins
into separate files.
(DEF_GOMP_BUILTIN): New.
(BUILT_IN_OMP_GET_THREAD_NUM, BUILT_IN_GOMP_BARRIER,
BUILT_IN_GOMP_CRITICAL_START, BUILT_IN_GOMP_CRITICAL_END,
BUILT_IN_GOMP_CRITICAL_NAME_START, BUILT_IN_GOMP_CRITICAL_NAME_END,
BUILT_IN_GOMP_LOOP_STATIC_START, BUILT_IN_GOMP_LOOP_DYNAMIC_START,
BUILT_IN_GOMP_LOOP_GUIDED_START, BUILT_IN_GOMP_LOOP_RUNTIME_START,
BUILT_IN_GOMP_LOOP_ORDERED_STATIC_START,
BUILT_IN_GOMP_LOOP_ORDERED_DYNAMIC_START,
BUILT_IN_GOMP_LOOP_ORDERED_GUIDED_START,
BUILT_IN_GOMP_LOOP_ORDERED_RUNTIME_START,
BUILT_IN_GOMP_LOOP_STATIC_NEXT, BUILT_IN_GOMP_LOOP_DYNAMIC_NEXT,
BUILT_IN_GOMP_LOOP_GUIDED_NEXT, BUILT_IN_GOMP_LOOP_RUNTIME_NEXT,
BUILT_IN_GOMP_LOOP_ORDERED_STATIC_NEXT,
BUILT_IN_GOMP_LOOP_ORDERED_DYNAMIC_NEXT,
BUILT_IN_GOMP_LOOP_ORDERED_GUIDED_NEXT,
BUILT_IN_GOMP_LOOP_ORDERED_RUNTIME_NEXT,
BUILT_IN_GOMP_PARALLEL_LOOP_STATIC_START,
BUILT_IN_GOMP_PARALLEL_LOOP_DYNAMIC_START,
BUILT_IN_GOMP_PARALLEL_LOOP_GUIDED_START,
BUILT_IN_GOMP_PARALLEL_LOOP_RUNTIME_START,
BUILT_IN_GOMP_LOOP_END, BUILT_IN_GOMP_LOOP_END_NOWAIT,
BUILT_IN_GOMP_ORDERED_START, BUILT_IN_GOMP_ORDERED_END,
BUILT_IN_GOMP_PARALLEL_START, BUILT_IN_GOMP_PARALLEL_END,
BUILT_IN_GOMP_SECTIONS_START, BUILT_IN_GOMP_SECTIONS_NEXT,
BUILT_IN_GOMP_PARALLEL_SECTIONS_START, BUILT_IN_GOMP_SECTIONS_END,
BUILT_IN_GOMP_SECTIONS_END_NOWAIT, BUILT_IN_GOMP_SINGLE_START,
BUILT_IN_GOMP_SINGLE_COPY_START, BUILT_IN_GOMP_SINGLE_COPY_END): New.
* sync-builtins.def: New file, moved from builtins.def.
* omp-builtins.def: New file, moved from builtins.def.
* c-objc-common.h (LANG_HOOKS_OMP_PREDETERMINED_SHARING): Redefine.
* gimple-low.c (lower_function_body): Clear data.
(lower_stmt): Do not handle COMPOUND_EXPR.
Remove call to print_node_brief.
* c-tree.h (c_finish_omp_clauses): New prototype.
(C_DECL_THREADPRIVATE_P): Define.
(lookup_name_no_remap, c_omp_remap_private): Remove
(c_begin_omp_parallel, c_finish_omp_parallel): Update.
(check_for_loop_decls): Update decl.
(lookup_name_no_remap, c_omp_remap_private): Declare.
(build_indirect_ref, build_modify_expr, pushdecl,
pushdecl_top_level): Move to c-common.h.
* dwarf2out.c (loc_descriptor_from_tree_1): Don't set unsignedp
before the switch, but just in the 2 places that need it.
* c-decl.c (diagnose_mismatched_decls): Do not check for
mismatched thread-local attributes when OLDDECL is marked
threadprivate and NEWDECL has no thread-local attributes.
(merge_decls): Merge C_DECL_THREADPRIVATE_P.
(c_gimple_diagnostics_recursively): Rename from
c_warn_unused_result_recursively. Invoke
diagnose_omp_structured_block_errors.
(check_for_loop_decls): Return a singular decl found.
* langhooks.c (lhd_omp_predetermined_sharing): Return
OMP_CLAUSE_DEFAULT_SHARED for DECL_ARTIFICIAL decls.
(lhd_omp_firstprivatize_type_sizes): New.
(lhd_omp_assignment): New.
(lhd_omp_predetermined_sharing): New.
* langhooks.h (struct gimplify_omp_ctx): Forward declare.
(struct lang_hooks_for_types): Add
omp_firstprivatize_type_sizes, omp_privatize_by_reference,
omp_predetermined_sharing, omp_disregard_value_expr,
omp_private_debug_clause, omp_clause_default_ctor,
omp_clause_copy_ctor, omp_clause_assign_op, omp_clause_dtor.
(c_finish_omp_clauses): New.
(c_finish_bc_stmt): Diagnose break within omp for.
(c_begin_omp_parallel, c_finish_omp_parallel): New.
(build_unary_op): Return error_mark after reporting
a readonly_error.
(build_modify_expr): Likewise.
* gimplify.c: Include optabs.h and pointer-set.h.
(enum gimplify_omp_var_data): Declare.
(struct gimplify_omp_ctx): Declare.
(struct gimplify_ctx): Add fields prev_context, combined_pre_p
and combined_ctxp.
(gimplify_ctxp, gimplify_omp_ctxp): New local variables.
(push_gimplify_context, pop_gimplify_context): Allow nesting.
(splay_tree_compare_decl_uid): New.
(new_omp_context): New.
(delete_omp_context): New.
(gimple_add_tmp_var): Call omp_add_variable.
(gimplify_bind_expr): Likewise.
(gimplify_var_or_parm_decl): If omp_notice_variable returned
true, disregard DECL_VALUE_EXPR on the decl if any.
(gimplify_expr_in_ctx): New.
(omp_firstprivatize_variable, omp_firstprivatize_type_sizes
omp_add_variable, omp_notice_variable, omp_is_private
gimplify_scan_omp_clauses, gimplify_adjust_omp_clauses_1
gimplify_adjust_omp_clauses, gimplify_omp_parallel
gimplify_omp_for, gimplify_omp_workshare, goa_lhs_expr_p
gimplify_omp_atomic_fetch_op, goa_stabilize_expr
gimplify_omp_atomic_pipeline, gimplify_omp_atomic_mutex
gimplify_omp_atomic): New.
(gimplify_expr): Handle OMP_PARALLEL, OMP_FOR, OMP_SECTIONS,
OMP_SINGLE, OMP_SECTION, OMP_MASTER, OMP_ORDERED,
OMP_CRITICAL and OMP_ATOMIC.
(gimplify_body): Verify gimplify_ctxp is empty after gimplification.
* c-pragma.h (enum pragma_kind): Add
PRAGMA_OMP_ATOMIC, PRAGMA_OMP_BARRIER,
PRAGMA_OMP_CRITICAL, PRAGMA_OMP_FLUSH, PRAGMA_OMP_FOR,
PRAGMA_OMP_MASTER, PRAGMA_OMP_ORDERED,
PRAGMA_OMP_PARALLEL, PRAGMA_OMP_PARALLEL_FOR,
PRAGMA_OMP_PARALLEL_SECTIONS, PRAGMA_OMP_SECTION,
PRAGMA_OMP_SECTIONS, PRAGMA_OMP_SINGLE,
PRAGMA_OMP_THREADPRIVATE.
* tree.def (OMP_PARALLEL, OMP_FOR, OMP_SECTIONS,
OMP_SINGLE, OMP_SECTION, OMP_MASTER, OMP_ORDERED,
OMP_CRITICAL, OMP_ATOMIC, OMP_CLAUSE_PRIVATE,
OMP_CLAUSE_SHARED, OMP_CLAUSE_FIRSTPRIVATE,
OMP_CLAUSE_LASTPRIVATE, OMP_CLAUSE_REDUCTION,
OMP_CLAUSE_COPYIN, OMP_CLAUSE_COPYPRIVATE,
OMP_CLAUSE_IF, OMP_CLAUSE_NUM_THREADS,
OMP_CLAUSE_SCHEDULE, OMP_CLAUSE_NOWAIT,
OMP_CLAUSE_ORDERED, OMP_CLAUSE_DEFAULT): Define.
* print-tree.c (print_node): Dump DECL_VALUE_EXPR.
* tree-ssa-dce.c (find_control_dependence): Do not assume that
ENTRY_BLOCK_PTR->next_bb == single_succ (ENTRY_BLOCK_PTR).
* tree-nested.c (convert_call_expr): Call walk_body on OMP_BODY for
OpenMP directives.
(struct nesting_info): Add field_map,
suppress_expansion, debug_var_chain.
(create_nesting_tree): Initialize them.
(lookup_field_for_decl): Use field_map.
(get_nonlocal_debug_decl, get_local_debug_decl): New.
(convert_local_omp_clauses): New.
(finalize_nesting_tree_1): Add debug_var_chain to toplevel block.
(walk_body): Split out of walk_function.
(convert_nonlocal_omp_clauses, convert_local_omp_clauses): New.
(convert_nonlocal_reference): Handle omp statements.
(convert_local_reference): Likewise.
(unnest_nesting_tree_1): Split out of finalize_nesting_tree_1.
(unnest_nesting_tree): New.
(lower_nested_functions): Call it.
(insert_field_into_struct): Make extern.
(struct walk_stmt_info): Move to tree-gimple.h.
(walk_stmts): Make extern.
* omp-builtins.def: New file.
* tree-iterator.c (expr_only): Clarify comment.
* c-common.h (pushdecl_top_level, pushdecl,
build_modify_expr, build_indirect_ref,
c_finish_omp_master, c_finish_omp_critical,
c_finish_omp_ordered, c_finish_omp_barrier,
c_finish_omp_atomic, c_finish_omp_flush,
c_finish_omp_for, c_split_parallel_clauses,
omp_clause_default_kind, c_omp_sharing_predetermined,
c_omp_remap_decl): Declare.
* Makefile.in (BUILTINS_DEF): Add omp-builtins.def.
(OBJS-common): Add omp-low.o.
(c-omp.o, omp-low.o): Add.
(gimplify.o): Add dependency on $(OPTABS_H).
(GTFILES): Add omp-low.c.
(gt-stringpool.h): Add.
* tree-cfg.c (set_bb_for_stmt): Do not update the
block-to-labels map if we are currently expanding to RTL.
(tree_node_can_be_shared): Remove unnecessary CONSTANT_CLASS_P
checks.
Handle IDENTIFIER_NODE.
(tree_verify_flow_info): Do not ICE when emitting error
messages about invalid labels.
(dump_function_to_file): Reset CFUN before emitting the body
of the function.
(debug_function): New.
* passes.c (init_optimization_passes): Schedule
pass_lower_omp.
* langhooks-def.h (lhd_omp_predetermined_sharing,
lhd_omp_assignment, lhd_omp_firstprivatize_type_sizes):
Declare.
(LANG_HOOKS_OMP_FIRSTPRIVATIZE_TYPE_SIZES): Define.
(LANG_HOOKS_FOR_TYPES_INITIALIZER): Use it.
(LANG_HOOKS_OMP_PRIVATIZE_BY_REFERENCE,
LANG_HOOKS_OMP_PREDETERMINED_SHARING,
LANG_HOOKS_OMP_DISREGARD_VALUE_EXPR,
LANG_HOOKS_OMP_PRIVATE_DEBUG_CLAUSE,
LANG_HOOKS_OMP_CLAUSE_DEFAULT_CTOR,
LANG_HOOKS_OMP_CLAUSE_COPY_CTOR,
LANG_HOOKS_OMP_CLAUSE_ASSIGN_OP,
LANG_HOOKS_OMP_CLAUSE_DTOR): Define.
(LANG_HOOK_DECLS): Use them.
2006-01-18 Dmitry Kurochkin <dmitry.kurochkin@gmail.com>
Richard Henderson <rth@redhat.com>
Jakub Jelinek <jakub@redhat.com>
Diego Novillo <dnovillo@redhat.com>
* c-parser.c (pragma_omp_clause): Define.
(c_parser_declaration_or_fndef): Document OpenMP syntax.
(c_parser_compound_statement): Likewise.
(c_parser_statement): Likewise.
(c_parser_pragma): Handle omp pragmas.
(OMP_FOR_CLAUSE_MASK, OMP_SECTIONS_CLAUSE_MASK,
OMP_PARALLEL_CLAUSE_MASK, OMP_SINGLE_CLAUSE_MASK): Define.
(c_parser_omp_clause_name, check_no_duplicate_clause,
c_parser_omp_variable_list,
c_parser_omp_var_list_parens, c_parser_omp_clause_copyin,
c_parser_omp_clause_copyprivate,
c_parser_omp_clause_default,
c_parser_omp_clause_firstprivate, c_parser_omp_clause_if,
c_parser_omp_clause_lastprivate,
c_parser_omp_clause_nowait,
c_parser_omp_clause_num_threads,
c_parser_omp_clause_ordered, c_parser_omp_clause_private,
c_parser_omp_clause_reduction,
c_parser_omp_clause_schedule, c_parser_omp_clause_shared,
c_parser_omp_all_clauses, c_parser_omp_structured_block,
c_parser_omp_atomic, c_parser_omp_barrier,
c_parser_omp_critical, c_parser_omp_flush,
c_parser_omp_for_loop, c_parser_omp_for,
c_parser_omp_master, c_parser_omp_ordered,
c_parser_omp_sections_scope, c_parser_omp_sections,
c_parser_omp_parallel, c_parser_omp_single,
c_parser_omp_construct, c_parser_omp_threadprivate): New.
* c-pragma.c (init_pragma): Do omp pragma registration here.
* c.opt (fopenmp): New flag.
2006-01-18 Eric Christopher <echristo@apple.com>
* gcc.c (GOMP_SELF_SPECS): Bracket in #ifndef/#endif.
* config/darwin.h (GOMP_SELF_SPECS): Define.
testsuite/
2006-01-18 Richard Henderson <rth@redhat.com>
Aldy Hernandez <aldyh@redhat.com>
Jakub Jelinek <jakub@redhat.com>
Diego Novillo <dnovillo@redhat.com>
Uros Bizjak <uros@kss-loka.si>
* testsuite/gcc.dg/gomp: New directory.
From-SVN: r109902
2006-01-18 20:21:25 +01:00
;;
2011-03-28 13:21:17 +02:00
*-*-netbsd* | *-*-freebsd* | *-*-openbsd* | *-*-dragonfly*)
[multiple changes]
2006-01-18 Richard Henderson <rth@redhat.com>
Jakub Jelinek <jakub@redhat.com>
Diego Novillo <dnovillo@redhat.com>
* libgomp: New directory.
* Makefile.def: Add target_module libgomp.
* Makefile.in: Regenerate.
* configure.in (target_libraries): Add target-libgomp.
* configure: Regenerate.
contrib/
2006-01-18 Richard Henderson <rth@redhat.com>
Diego Novillo <dnovillo@redhat.com>
* gcc_update (files_and_dependencies): Add libgomp files.
gcc/
2006-01-18 Richard Henderson <rth@redhat.com>
Aldy Hernandez <aldyh@redhat.com>
Jakub Jelinek <jakub@redhat.com>
Diego Novillo <dnovillo@redhat.com>
* omp-low.c: New file.
* c-omp.c: New file.
2006-01-18 Richard Henderson <rth@redhat.com>
Jakub Jelinek <jakub@redhat.com>
Diego Novillo <dnovillo@redhat.com>
* doc/invoke.texi: Document -fopenmp.
* tree-dump.h (debug_function): Declare.
* hooks.c (hook_bool_tree_bool_false): New function.
(hook_tree_tree_null): Remove.
(hook_tree_tree_tree_null): New.
* hooks.h: Update to match.
* tree-pretty-print.c (debug_tree_chain): New.
(print_generic_expr): Handle TDF_CHAIN.
(dump_generic_node): Handle BLOCK.
Do not abort with incomplete SWITCH_EXPRs.
Do not dump body of an OpenMP directive if TDF_SLIM is given.
<case OMP_PARALLEL, OMP_FOR, OMP_SECTIONS>: Don't
print space after directive name.
<OMP_FOR>: Handle printing OMP_FOR_PRE_BODY.
Handle OMP_MASTER and OMP_ORDERED.
Handle printing of OMP_BODY just in one place, goto
dump_omp_body in the rest of OMP_* nodes that have
OMP_BODY.
Don't handle clause nodes here. Update omp statements to
use dump_omp_clauses.
Handle OMP_SINGLE, OMP_SECTIONS, OMP_SECTION,
OMP_CLAUSE_ORDERED, OMP_CLAUSE_SCHEDULE, OMP_ATOMIC,
OMP_CRITICAL, OMP_CLAUSE_NOWAIT, GOMP_CLAUSE_IF,
GOMP_CLAUSE_NUM_THREADS, GOMP_FOR, GOMP_CLAUSE_SHARED,
GOMP_CLAUSE_FIRSTPRIVATE, GOMP_CLAUSE_LASTPRIVATE,
GOMP_CLAUSE_COPYIN and GOMP_CLAUSE_COPYPRIVATE.
Adjust output for GOMP_PARALLEL.
(dump_omp_clauses): New.
(print_declaration): Dump DECL_VALUE_EXPR.
(op_symbol_1): Split out of op_symbol.
(dumping_stmts): Remove. Update all users.
* cgraph.c (cgraph_analyze_queue): New.
(cgraph_add_new_function): New.
* cgraph.h (cgraph_analyze_queue): Declare.
(cgraph_add_new_function): Declare.
(cgraph_lower_function): Remove.
* tree.c (walk_tree): Walk OMP_CLAUSE_CHAIN of OMP_CLAUSE_*
nodes. Use switch for all nodes, handle most of IS_EXPR_CODE_CLASS
and TYPE_P nodes in its default clause.
(empty_body_p): New.
(tree_range_check_failed): New.
(build5_stat): New.
* tree.h (OMP_CLAUSE_REDUCTION_INIT,
OMP_CLAUSE_REDUCTION_MERGE,
OMP_CLAUSE_REDUCTION_PLACEHOLDER,
OMP_CLAUSE_PRIVATE_DEBUG,
OMP_CLAUSE_LASTPRIVATE_FIRSTPRIVATE, OMP_FOR_PRE_BODY,
OMP_MASTER_BODY, OMP_ORDERED_BODY OMP_BODY,
OMP_CLAUSES, OMP_CLAUSE_DECL, OMP_CLAUSE_DEFAULT_KIND,
OMP_CLAUSE_CHAIN, OMP_CLAUSE_OUTER_DECL,
OMP_CLAUSE_INNER_DECL, OMP_CLAUSE_NUM_THREADS_EXPR,
OMP_CLAUSE_IF_EXPR, OMP_CLAUSE_SCHEDULE_CHUNK_EXPR,
OMP_CLAUSE_SCHEDULE_CHUNK_SIZE. OMP_PARALLEL_VAR_INIT,
OMP_PARALLEL_VAR_REDUC, OMP_FOR_VAR_INIT,
OMP_FOR_VAR_LAST, OMP_FOR_VAR_REDUC,
OMP_SECTIONS_VAR_INIT, OMP_SECTIONS_VAR_LAST,
OMP_SECTIONS_VAR_REDUC, OMP_CLAUSE_REDUCTION_CODE
OMP_SINGLE_CLAUSES, OMP_SINGLE_BODY,
OMP_CLAUSE_SCHEDULE_CHUNK_SIZE, OMP_SECTION_BODY,
OMP_CRITICAL_NAME, OMP_CRITICAL_BODY): New.
(TREE_RANGE_CHECK): New.
(empty_body_p): Declare.
(enum omp_clause_default_kind): New.
(build_string_literal): Declare.
(enum omp_clause_schedule_kind, OMP_CLAUSE_SCHEDULE_KIND): New.
(build5_stat, build5): Declare.
* tree-pass.h (TDF_CHAIN): Define.
* tree-pass.h (PROP_gimple_lomp): Define.
(pass_lower_omp): Declare.
* diagnostic.h (debug_tree_chain): Declare.
* builtins.c (get_builtin_sync_mode): Use 0 as last argument to
mode_for_size.
(expand_builtin): Handle sync BUILT_IN_*_16 builtins.
* builtins.c (build_string_literal): Make extern.
* gcc.c (include_spec_function): New.
(static_spec_functions): Add it.
(main): Move load of libgomp.spec ...
(LINK_COMMAND_SPEC): ... here.
(link_gomp_spec): New.
(static_specs): Include it.
(LINK_COMMAND_SPEC): Add link_gomp.
(GOMP_SELF_SPECS): New.
(driver_self_specs): Include it.
(switch_matches): Don't mark inline.
(main): Load libgomp.spec.
* tree-gimple.c (is_gimple_stmt): True for OMP_MASTER,
OMP_ORDERED, OMP_CRITICAL, OMP_SECTIONS, OMP_SECTION,
and OMP_SINGLE, OMP_FOR and OMP_PARALLEL.
* tree-gimple.h (enum omp_parallel): Declare.
(determine_parallel_type): Declare.
(omp_firstprivatize_variable): Declare.
(omp_reduction_init): Declare.
(diagnose_omp_structured_block_errors): Declare.
(struct walk_stmt_info): Add want_return_expr.
(struct walk_stmt_info): Add want_bind_expr, want_locations.
(find_omp_clause): Declare.
(insert_field_into_struct): Declare.
(struct walk_stmt_info): Move from tree-nested.c
(walk_stmts): Declare.
* c-cppbuiltin.c (c_cpp_builtins): If -fopenmp, #define _OPENMP
to 200505.
* cgraphunit.c (cgraph_lower_function): Make static.
(cgraph_finalize_pending_functions): New.
(cgraph_finalize_function): Call it.
(cgraph_finalize_compilation_unit): Likewise.
* builtin-types.def (BT_I16, BT_FN_I16_VPTR_I16,
BT_FN_BOOL_VPTR_I16_I16, BT_FN_I16_VPTR_I16_I16): Add.
(BT_FN_UINT_UINT): New.
(DEF_FUNCTION_TYPE_6, DEF_FUNCTION_TYPE_7,
DEF_FUNCTION_TYPE_VAR_4): Document.
(BT_PTR_LONG, BT_PTR_PTR, BT_FN_BOOL, BT_FN_INT,
BT_FN_VOID_PTRPTR, BT_PTR_FN_VOID_PTR,
BT_FN_BOOL_LONGPTR_LONGPTR, BT_FN_VOID_OMPFN_PTR_UINT,
BT_FN_VOID_OMPFN_PTR_UINT_UINT,
BT_FN_BOOL_LONG_LONG_LONG_LONGPTR_LONGPTR,
BT_FN_BOOL_LONG_LONG_LONG_LONG_LONGPTR_LONGPTR,
BT_FN_VOID_OMPFN_PTR_UINT_LONG_LONG_LONG,
BT_FN_VOID_OMPFN_PTR_UINT_LONG_LONG_LONG_LONG): New.
* builtins.def: Update DEF_BUILTIN comment to include COND argument.
Move all DEF_SYNC_BUILTIN () and DEF_GOMP_BUILTIN () builtins
into separate files.
(DEF_GOMP_BUILTIN): New.
(BUILT_IN_OMP_GET_THREAD_NUM, BUILT_IN_GOMP_BARRIER,
BUILT_IN_GOMP_CRITICAL_START, BUILT_IN_GOMP_CRITICAL_END,
BUILT_IN_GOMP_CRITICAL_NAME_START, BUILT_IN_GOMP_CRITICAL_NAME_END,
BUILT_IN_GOMP_LOOP_STATIC_START, BUILT_IN_GOMP_LOOP_DYNAMIC_START,
BUILT_IN_GOMP_LOOP_GUIDED_START, BUILT_IN_GOMP_LOOP_RUNTIME_START,
BUILT_IN_GOMP_LOOP_ORDERED_STATIC_START,
BUILT_IN_GOMP_LOOP_ORDERED_DYNAMIC_START,
BUILT_IN_GOMP_LOOP_ORDERED_GUIDED_START,
BUILT_IN_GOMP_LOOP_ORDERED_RUNTIME_START,
BUILT_IN_GOMP_LOOP_STATIC_NEXT, BUILT_IN_GOMP_LOOP_DYNAMIC_NEXT,
BUILT_IN_GOMP_LOOP_GUIDED_NEXT, BUILT_IN_GOMP_LOOP_RUNTIME_NEXT,
BUILT_IN_GOMP_LOOP_ORDERED_STATIC_NEXT,
BUILT_IN_GOMP_LOOP_ORDERED_DYNAMIC_NEXT,
BUILT_IN_GOMP_LOOP_ORDERED_GUIDED_NEXT,
BUILT_IN_GOMP_LOOP_ORDERED_RUNTIME_NEXT,
BUILT_IN_GOMP_PARALLEL_LOOP_STATIC_START,
BUILT_IN_GOMP_PARALLEL_LOOP_DYNAMIC_START,
BUILT_IN_GOMP_PARALLEL_LOOP_GUIDED_START,
BUILT_IN_GOMP_PARALLEL_LOOP_RUNTIME_START,
BUILT_IN_GOMP_LOOP_END, BUILT_IN_GOMP_LOOP_END_NOWAIT,
BUILT_IN_GOMP_ORDERED_START, BUILT_IN_GOMP_ORDERED_END,
BUILT_IN_GOMP_PARALLEL_START, BUILT_IN_GOMP_PARALLEL_END,
BUILT_IN_GOMP_SECTIONS_START, BUILT_IN_GOMP_SECTIONS_NEXT,
BUILT_IN_GOMP_PARALLEL_SECTIONS_START, BUILT_IN_GOMP_SECTIONS_END,
BUILT_IN_GOMP_SECTIONS_END_NOWAIT, BUILT_IN_GOMP_SINGLE_START,
BUILT_IN_GOMP_SINGLE_COPY_START, BUILT_IN_GOMP_SINGLE_COPY_END): New.
* sync-builtins.def: New file, moved from builtins.def.
* omp-builtins.def: New file, moved from builtins.def.
* c-objc-common.h (LANG_HOOKS_OMP_PREDETERMINED_SHARING): Redefine.
* gimple-low.c (lower_function_body): Clear data.
(lower_stmt): Do not handle COMPOUND_EXPR.
Remove call to print_node_brief.
* c-tree.h (c_finish_omp_clauses): New prototype.
(C_DECL_THREADPRIVATE_P): Define.
(lookup_name_no_remap, c_omp_remap_private): Remove
(c_begin_omp_parallel, c_finish_omp_parallel): Update.
(check_for_loop_decls): Update decl.
(lookup_name_no_remap, c_omp_remap_private): Declare.
(build_indirect_ref, build_modify_expr, pushdecl,
pushdecl_top_level): Move to c-common.h.
* dwarf2out.c (loc_descriptor_from_tree_1): Don't set unsignedp
before the switch, but just in the 2 places that need it.
* c-decl.c (diagnose_mismatched_decls): Do not check for
mismatched thread-local attributes when OLDDECL is marked
threadprivate and NEWDECL has no thread-local attributes.
(merge_decls): Merge C_DECL_THREADPRIVATE_P.
(c_gimple_diagnostics_recursively): Rename from
c_warn_unused_result_recursively. Invoke
diagnose_omp_structured_block_errors.
(check_for_loop_decls): Return a singular decl found.
* langhooks.c (lhd_omp_predetermined_sharing): Return
OMP_CLAUSE_DEFAULT_SHARED for DECL_ARTIFICIAL decls.
(lhd_omp_firstprivatize_type_sizes): New.
(lhd_omp_assignment): New.
(lhd_omp_predetermined_sharing): New.
* langhooks.h (struct gimplify_omp_ctx): Forward declare.
(struct lang_hooks_for_types): Add
omp_firstprivatize_type_sizes, omp_privatize_by_reference,
omp_predetermined_sharing, omp_disregard_value_expr,
omp_private_debug_clause, omp_clause_default_ctor,
omp_clause_copy_ctor, omp_clause_assign_op, omp_clause_dtor.
(c_finish_omp_clauses): New.
(c_finish_bc_stmt): Diagnose break within omp for.
(c_begin_omp_parallel, c_finish_omp_parallel): New.
(build_unary_op): Return error_mark after reporting
a readonly_error.
(build_modify_expr): Likewise.
* gimplify.c: Include optabs.h and pointer-set.h.
(enum gimplify_omp_var_data): Declare.
(struct gimplify_omp_ctx): Declare.
(struct gimplify_ctx): Add fields prev_context, combined_pre_p
and combined_ctxp.
(gimplify_ctxp, gimplify_omp_ctxp): New local variables.
(push_gimplify_context, pop_gimplify_context): Allow nesting.
(splay_tree_compare_decl_uid): New.
(new_omp_context): New.
(delete_omp_context): New.
(gimple_add_tmp_var): Call omp_add_variable.
(gimplify_bind_expr): Likewise.
(gimplify_var_or_parm_decl): If omp_notice_variable returned
true, disregard DECL_VALUE_EXPR on the decl if any.
(gimplify_expr_in_ctx): New.
(omp_firstprivatize_variable, omp_firstprivatize_type_sizes
omp_add_variable, omp_notice_variable, omp_is_private
gimplify_scan_omp_clauses, gimplify_adjust_omp_clauses_1
gimplify_adjust_omp_clauses, gimplify_omp_parallel
gimplify_omp_for, gimplify_omp_workshare, goa_lhs_expr_p
gimplify_omp_atomic_fetch_op, goa_stabilize_expr
gimplify_omp_atomic_pipeline, gimplify_omp_atomic_mutex
gimplify_omp_atomic): New.
(gimplify_expr): Handle OMP_PARALLEL, OMP_FOR, OMP_SECTIONS,
OMP_SINGLE, OMP_SECTION, OMP_MASTER, OMP_ORDERED,
OMP_CRITICAL and OMP_ATOMIC.
(gimplify_body): Verify gimplify_ctxp is empty after gimplification.
* c-pragma.h (enum pragma_kind): Add
PRAGMA_OMP_ATOMIC, PRAGMA_OMP_BARRIER,
PRAGMA_OMP_CRITICAL, PRAGMA_OMP_FLUSH, PRAGMA_OMP_FOR,
PRAGMA_OMP_MASTER, PRAGMA_OMP_ORDERED,
PRAGMA_OMP_PARALLEL, PRAGMA_OMP_PARALLEL_FOR,
PRAGMA_OMP_PARALLEL_SECTIONS, PRAGMA_OMP_SECTION,
PRAGMA_OMP_SECTIONS, PRAGMA_OMP_SINGLE,
PRAGMA_OMP_THREADPRIVATE.
* tree.def (OMP_PARALLEL, OMP_FOR, OMP_SECTIONS,
OMP_SINGLE, OMP_SECTION, OMP_MASTER, OMP_ORDERED,
OMP_CRITICAL, OMP_ATOMIC, OMP_CLAUSE_PRIVATE,
OMP_CLAUSE_SHARED, OMP_CLAUSE_FIRSTPRIVATE,
OMP_CLAUSE_LASTPRIVATE, OMP_CLAUSE_REDUCTION,
OMP_CLAUSE_COPYIN, OMP_CLAUSE_COPYPRIVATE,
OMP_CLAUSE_IF, OMP_CLAUSE_NUM_THREADS,
OMP_CLAUSE_SCHEDULE, OMP_CLAUSE_NOWAIT,
OMP_CLAUSE_ORDERED, OMP_CLAUSE_DEFAULT): Define.
* print-tree.c (print_node): Dump DECL_VALUE_EXPR.
* tree-ssa-dce.c (find_control_dependence): Do not assume that
ENTRY_BLOCK_PTR->next_bb == single_succ (ENTRY_BLOCK_PTR).
* tree-nested.c (convert_call_expr): Call walk_body on OMP_BODY for
OpenMP directives.
(struct nesting_info): Add field_map,
suppress_expansion, debug_var_chain.
(create_nesting_tree): Initialize them.
(lookup_field_for_decl): Use field_map.
(get_nonlocal_debug_decl, get_local_debug_decl): New.
(convert_local_omp_clauses): New.
(finalize_nesting_tree_1): Add debug_var_chain to toplevel block.
(walk_body): Split out of walk_function.
(convert_nonlocal_omp_clauses, convert_local_omp_clauses): New.
(convert_nonlocal_reference): Handle omp statements.
(convert_local_reference): Likewise.
(unnest_nesting_tree_1): Split out of finalize_nesting_tree_1.
(unnest_nesting_tree): New.
(lower_nested_functions): Call it.
(insert_field_into_struct): Make extern.
(struct walk_stmt_info): Move to tree-gimple.h.
(walk_stmts): Make extern.
* omp-builtins.def: New file.
* tree-iterator.c (expr_only): Clarify comment.
* c-common.h (pushdecl_top_level, pushdecl,
build_modify_expr, build_indirect_ref,
c_finish_omp_master, c_finish_omp_critical,
c_finish_omp_ordered, c_finish_omp_barrier,
c_finish_omp_atomic, c_finish_omp_flush,
c_finish_omp_for, c_split_parallel_clauses,
omp_clause_default_kind, c_omp_sharing_predetermined,
c_omp_remap_decl): Declare.
* Makefile.in (BUILTINS_DEF): Add omp-builtins.def.
(OBJS-common): Add omp-low.o.
(c-omp.o, omp-low.o): Add.
(gimplify.o): Add dependency on $(OPTABS_H).
(GTFILES): Add omp-low.c.
(gt-stringpool.h): Add.
* tree-cfg.c (set_bb_for_stmt): Do not update the
block-to-labels map if we are currently expanding to RTL.
(tree_node_can_be_shared): Remove unnecessary CONSTANT_CLASS_P
checks.
Handle IDENTIFIER_NODE.
(tree_verify_flow_info): Do not ICE when emitting error
messages about invalid labels.
(dump_function_to_file): Reset CFUN before emitting the body
of the function.
(debug_function): New.
* passes.c (init_optimization_passes): Schedule
pass_lower_omp.
* langhooks-def.h (lhd_omp_predetermined_sharing,
lhd_omp_assignment, lhd_omp_firstprivatize_type_sizes):
Declare.
(LANG_HOOKS_OMP_FIRSTPRIVATIZE_TYPE_SIZES): Define.
(LANG_HOOKS_FOR_TYPES_INITIALIZER): Use it.
(LANG_HOOKS_OMP_PRIVATIZE_BY_REFERENCE,
LANG_HOOKS_OMP_PREDETERMINED_SHARING,
LANG_HOOKS_OMP_DISREGARD_VALUE_EXPR,
LANG_HOOKS_OMP_PRIVATE_DEBUG_CLAUSE,
LANG_HOOKS_OMP_CLAUSE_DEFAULT_CTOR,
LANG_HOOKS_OMP_CLAUSE_COPY_CTOR,
LANG_HOOKS_OMP_CLAUSE_ASSIGN_OP,
LANG_HOOKS_OMP_CLAUSE_DTOR): Define.
(LANG_HOOK_DECLS): Use them.
2006-01-18 Dmitry Kurochkin <dmitry.kurochkin@gmail.com>
Richard Henderson <rth@redhat.com>
Jakub Jelinek <jakub@redhat.com>
Diego Novillo <dnovillo@redhat.com>
* c-parser.c (pragma_omp_clause): Define.
(c_parser_declaration_or_fndef): Document OpenMP syntax.
(c_parser_compound_statement): Likewise.
(c_parser_statement): Likewise.
(c_parser_pragma): Handle omp pragmas.
(OMP_FOR_CLAUSE_MASK, OMP_SECTIONS_CLAUSE_MASK,
OMP_PARALLEL_CLAUSE_MASK, OMP_SINGLE_CLAUSE_MASK): Define.
(c_parser_omp_clause_name, check_no_duplicate_clause,
c_parser_omp_variable_list,
c_parser_omp_var_list_parens, c_parser_omp_clause_copyin,
c_parser_omp_clause_copyprivate,
c_parser_omp_clause_default,
c_parser_omp_clause_firstprivate, c_parser_omp_clause_if,
c_parser_omp_clause_lastprivate,
c_parser_omp_clause_nowait,
c_parser_omp_clause_num_threads,
c_parser_omp_clause_ordered, c_parser_omp_clause_private,
c_parser_omp_clause_reduction,
c_parser_omp_clause_schedule, c_parser_omp_clause_shared,
c_parser_omp_all_clauses, c_parser_omp_structured_block,
c_parser_omp_atomic, c_parser_omp_barrier,
c_parser_omp_critical, c_parser_omp_flush,
c_parser_omp_for_loop, c_parser_omp_for,
c_parser_omp_master, c_parser_omp_ordered,
c_parser_omp_sections_scope, c_parser_omp_sections,
c_parser_omp_parallel, c_parser_omp_single,
c_parser_omp_construct, c_parser_omp_threadprivate): New.
* c-pragma.c (init_pragma): Do omp pragma registration here.
* c.opt (fopenmp): New flag.
2006-01-18 Eric Christopher <echristo@apple.com>
* gcc.c (GOMP_SELF_SPECS): Bracket in #ifndef/#endif.
* config/darwin.h (GOMP_SELF_SPECS): Define.
testsuite/
2006-01-18 Richard Henderson <rth@redhat.com>
Aldy Hernandez <aldyh@redhat.com>
Jakub Jelinek <jakub@redhat.com>
Diego Novillo <dnovillo@redhat.com>
Uros Bizjak <uros@kss-loka.si>
* testsuite/gcc.dg/gomp: New directory.
From-SVN: r109902
2006-01-18 20:21:25 +01:00
;;
Remove obsolete IRIX 6.5 support
libstdc++-v3:
* configure.host (irix6.5*): Remove.
* config/os/irix: Remove.
* config/io/basic_file_stdio.cc (__basic_file<char>::showmanyc())
[_GLIBCXX_FIONREAD_TAKES_OFF_T]: Remove.
* doc/xml/faq.xml: Remove IRIX reference.
* doc/xml/manual/using.xml (Finding Dynamic or Shared Libraries):
Remove IRIX example.
* testsuite/20_util/shared_ptr/thread/default_weaktoshared.cc:
Remove mips-sgi-irix6* handling.
* testsuite/20_util/shared_ptr/thread/mutex_weaktoshared.cc: Likewise.
* testsuite/21_strings/basic_string/pthread18185.cc: Likewise.
* testsuite/21_strings/basic_string/pthread4.cc: Likewise.
* testsuite/22_locale/locale/cons/12658_thread-1.cc: Likewise.
* testsuite/22_locale/locale/cons/12658_thread-2.cc: Likewise.
* testsuite/23_containers/list/pthread1.cc: Likewise.
* testsuite/23_containers/list/pthread5.cc: Likewise.
* testsuite/23_containers/map/pthread6.cc: Likewise.
* testsuite/23_containers/vector/debug/multithreaded_swap.cc: Likewise.
* testsuite/27_io/basic_ofstream/pthread2.cc: Likewise.
* testsuite/27_io/basic_ostringstream/pthread3.cc: Likewise.
* testsuite/30_threads/async/42819.cc: Likewise.
* testsuite/30_threads/async/49668.cc: Likewise.
* testsuite/30_threads/async/any.cc: Likewise.
* testsuite/30_threads/async/async.cc: Likewise.
* testsuite/30_threads/async/launch.cc: Likewise.
* testsuite/30_threads/async/sync.cc: Likewise.
* testsuite/30_threads/call_once/39909.cc: Likewise.
* testsuite/30_threads/call_once/49668.cc: Likewise.
* testsuite/30_threads/call_once/call_once1.cc: Likewise.
* testsuite/30_threads/condition_variable/cons/1.cc: Likewise.
* testsuite/30_threads/condition_variable/members/1.cc: Likewise.
* testsuite/30_threads/condition_variable/members/2.cc: Likewise.
* testsuite/30_threads/condition_variable/native_handle/typesizes.cc:
Likewise.
* testsuite/30_threads/condition_variable_any/50862.cc: Likewise.
* testsuite/30_threads/condition_variable_any/cons/1.cc: Likewise.
* testsuite/30_threads/condition_variable_any/members/1.cc: Likewise.
* testsuite/30_threads/condition_variable_any/members/2.cc: Likewise.
* testsuite/30_threads/future/cons/move.cc: Likewise.
* testsuite/30_threads/future/members/45133.cc: Likewise.
* testsuite/30_threads/future/members/get.cc: Likewise.
* testsuite/30_threads/future/members/get2.cc: Likewise.
* testsuite/30_threads/future/members/share.cc: Likewise.
* testsuite/30_threads/future/members/valid.cc: Likewise.
* testsuite/30_threads/future/members/wait.cc: Likewise.
* testsuite/30_threads/future/members/wait_for.cc: Likewise.
* testsuite/30_threads/future/members/wait_until.cc: Likewise.
* testsuite/30_threads/lock/1.cc: Likewise.
* testsuite/30_threads/lock/2.cc: Likewise.
* testsuite/30_threads/lock/3.cc: Likewise.
* testsuite/30_threads/lock/4.cc: Likewise.
* testsuite/30_threads/lock_guard/cons/1.cc: Likewise.
* testsuite/30_threads/mutex/cons/1.cc: Likewise.
* testsuite/30_threads/mutex/dest/destructor_locked.cc: Likewise.
* testsuite/30_threads/mutex/lock/1.cc: Likewise.
* testsuite/30_threads/mutex/native_handle/1.cc: Likewise.
* testsuite/30_threads/mutex/native_handle/typesizes.cc: Likewise.
* testsuite/30_threads/mutex/try_lock/1.cc: Likewise.
* testsuite/30_threads/mutex/try_lock/2.cc: Likewise.
* testsuite/30_threads/mutex/unlock/1.cc: Likewise.
* testsuite/30_threads/packaged_task/49668.cc: Likewise.
* testsuite/30_threads/packaged_task/cons/1.cc: Likewise.
* testsuite/30_threads/packaged_task/cons/2.cc: Likewise.
* testsuite/30_threads/packaged_task/cons/3.cc: Likewise.
* testsuite/30_threads/packaged_task/cons/alloc.cc: Likewise.
* testsuite/30_threads/packaged_task/cons/move.cc: Likewise.
* testsuite/30_threads/packaged_task/cons/move_assign.cc: Likewise.
* testsuite/30_threads/packaged_task/members/get_future.cc: Likewise.
* testsuite/30_threads/packaged_task/members/get_future2.cc: Likewise.
* testsuite/30_threads/packaged_task/members/invoke.cc: Likewise.
* testsuite/30_threads/packaged_task/members/invoke2.cc: Likewise.
* testsuite/30_threads/packaged_task/members/invoke3.cc: Likewise.
* testsuite/30_threads/packaged_task/members/invoke4.cc: Likewise.
* testsuite/30_threads/packaged_task/members/invoke5.cc: Likewise.
* testsuite/30_threads/packaged_task/members/reset.cc: Likewise.
* testsuite/30_threads/packaged_task/members/reset2.cc: Likewise.
* testsuite/30_threads/packaged_task/members/swap.cc: Likewise.
* testsuite/30_threads/packaged_task/members/valid.cc: Likewise.
* testsuite/30_threads/promise/cons/1.cc: Likewise.
* testsuite/30_threads/promise/cons/alloc.cc: Likewise.
* testsuite/30_threads/promise/cons/move.cc: Likewise.
* testsuite/30_threads/promise/cons/move_assign.cc: Likewise.
* testsuite/30_threads/promise/members/get_future.cc: Likewise.
* testsuite/30_threads/promise/members/get_future2.cc: Likewise.
* testsuite/30_threads/promise/members/set_exception.cc: Likewise.
* testsuite/30_threads/promise/members/set_exception2.cc: Likewise.
* testsuite/30_threads/promise/members/set_value.cc: Likewise.
* testsuite/30_threads/promise/members/set_value2.cc: Likewise.
* testsuite/30_threads/promise/members/set_value3.cc: Likewise.
* testsuite/30_threads/promise/members/swap.cc: Likewise.
* testsuite/30_threads/recursive_mutex/cons/1.cc: Likewise.
* testsuite/30_threads/recursive_mutex/dest/destructor_locked.cc:
Likewise.
* testsuite/30_threads/recursive_mutex/lock/1.cc: Likewise.
* testsuite/30_threads/recursive_mutex/native_handle/1.cc: Likewise.
* testsuite/30_threads/recursive_mutex/native_handle/typesizes.cc:
Likewise.
* testsuite/30_threads/recursive_mutex/try_lock/1.cc: Likewise.
* testsuite/30_threads/recursive_mutex/try_lock/2.cc: Likewise.
* testsuite/30_threads/recursive_mutex/unlock/1.cc: Likewise.
* testsuite/30_threads/recursive_timed_mutex/cons/1.cc: Likewise.
* testsuite/30_threads/recursive_timed_mutex/dest/destructor_locked.cc:
Likewise.
* testsuite/30_threads/recursive_timed_mutex/lock/1.cc: Likewise.
* testsuite/30_threads/recursive_timed_mutex/lock/2.cc: Likewise.
* testsuite/30_threads/recursive_timed_mutex/native_handle/1.cc:
Likewise.
* testsuite/30_threads/recursive_timed_mutex/native_handle/typesizes.cc:
Likewise.
* testsuite/30_threads/recursive_timed_mutex/try_lock/1.cc: Likewise.
* testsuite/30_threads/recursive_timed_mutex/try_lock/2.cc: Likewise.
* testsuite/30_threads/recursive_timed_mutex/try_lock_for/1.cc:
Likewise.
* testsuite/30_threads/recursive_timed_mutex/try_lock_for/2.cc:
Likewise.
* testsuite/30_threads/recursive_timed_mutex/try_lock_for/3.cc:
Likewise.
* testsuite/30_threads/recursive_timed_mutex/try_lock_until/1.cc:
Likewise.
* testsuite/30_threads/recursive_timed_mutex/try_lock_until/2.cc:
Likewise.
* testsuite/30_threads/recursive_timed_mutex/unlock/1.cc: Likewise.
* testsuite/30_threads/shared_future/cons/move.cc: Likewise.
* testsuite/30_threads/shared_future/members/45133.cc: Likewise.
* testsuite/30_threads/shared_future/members/get.cc: Likewise.
* testsuite/30_threads/shared_future/members/get2.cc: Likewise.
* testsuite/30_threads/shared_future/members/valid.cc: Likewise.
* testsuite/30_threads/shared_future/members/wait.cc: Likewise.
* testsuite/30_threads/shared_future/members/wait_for.cc: Likewise.
* testsuite/30_threads/shared_future/members/wait_until.cc: Likewise.
* testsuite/30_threads/this_thread/1.cc: Likewise.
* testsuite/30_threads/this_thread/2.cc: Likewise.
* testsuite/30_threads/this_thread/3.cc: Likewise.
* testsuite/30_threads/this_thread/4.cc: Likewise.
* testsuite/30_threads/thread/cons/1.cc: Likewise.
* testsuite/30_threads/thread/cons/2.cc: Likewise.
* testsuite/30_threads/thread/cons/3.cc: Likewise.
* testsuite/30_threads/thread/cons/4.cc: Likewise.
* testsuite/30_threads/thread/cons/49668.cc: Likewise.
* testsuite/30_threads/thread/cons/5.cc: Likewise.
* testsuite/30_threads/thread/cons/6.cc: Likewise.
* testsuite/30_threads/thread/cons/7.cc: Likewise.
* testsuite/30_threads/thread/cons/8.cc: Likewise.
* testsuite/30_threads/thread/cons/9.cc: Likewise.
* testsuite/30_threads/thread/cons/moveable.cc: Likewise.
* testsuite/30_threads/thread/members/1.cc: Likewise.
* testsuite/30_threads/thread/members/2.cc: Likewise.
* testsuite/30_threads/thread/members/3.cc: Likewise.
* testsuite/30_threads/thread/members/4.cc: Likewise.
* testsuite/30_threads/thread/members/5.cc: Likewise.
* testsuite/30_threads/thread/members/hardware_concurrency.cc: Likewise.
* testsuite/30_threads/thread/native_handle/typesizes.cc: Likewise.
* testsuite/30_threads/thread/swap/1.cc: Likewise.
* testsuite/30_threads/timed_mutex/cons/1.cc: Likewise.
* testsuite/30_threads/timed_mutex/dest/destructor_locked.cc: Likewise.
* testsuite/30_threads/timed_mutex/lock/1.cc: Likewise.
* testsuite/30_threads/timed_mutex/native_handle/1.cc: Likewise.
* testsuite/30_threads/timed_mutex/native_handle/typesizes.cc: Likewise.
* testsuite/30_threads/timed_mutex/try_lock/1.cc: Likewise.
* testsuite/30_threads/timed_mutex/try_lock/2.cc: Likewise.
* testsuite/30_threads/timed_mutex/try_lock_for/1.cc: Likewise.
* testsuite/30_threads/timed_mutex/try_lock_for/2.cc: Likewise.
* testsuite/30_threads/timed_mutex/try_lock_for/3.cc: Likewise.
* testsuite/30_threads/timed_mutex/try_lock_until/1.cc: Likewise.
* testsuite/30_threads/timed_mutex/try_lock_until/2.cc: Likewise.
* testsuite/30_threads/timed_mutex/unlock/1.cc: Likewise.
* testsuite/30_threads/try_lock/1.cc: Likewise.
* testsuite/30_threads/try_lock/2.cc: Likewise.
* testsuite/30_threads/try_lock/3.cc: Likewise.
* testsuite/30_threads/try_lock/4.cc: Likewise.
* testsuite/30_threads/unique_lock/cons/1.cc: Likewise.
* testsuite/30_threads/unique_lock/cons/2.cc: Likewise.
* testsuite/30_threads/unique_lock/cons/3.cc: Likewise.
* testsuite/30_threads/unique_lock/cons/4.cc: Likewise.
* testsuite/30_threads/unique_lock/cons/5.cc: Likewise.
* testsuite/30_threads/unique_lock/cons/6.cc: Likewise.
* testsuite/30_threads/unique_lock/locking/1.cc: Likewise.
* testsuite/30_threads/unique_lock/locking/2.cc: Likewise.
* testsuite/30_threads/unique_lock/locking/3.cc: Likewise.
* testsuite/30_threads/unique_lock/locking/4.cc: Likewise.
* testsuite/30_threads/unique_lock/modifiers/1.cc: Likewise.
* testsuite/30_threads/unique_lock/modifiers/2.cc: Likewise.
* testsuite/ext/rope/pthread7-rope.cc: Likewise.
* testsuite/tr1/2_general_utilities/shared_ptr/thread/default_weaktoshared.cc:
Likewise.
* testsuite/tr1/2_general_utilities/shared_ptr/thread/mutex_weaktoshared.cc:
Likewise.
* testsuite/23_containers/vector/capacity/resize/1.cc: Remove
dg-options for mips*-*-irix6*.
* testsuite/27_io/ios_base/storage/1.cc: Likewise.
* testsuite/27_io/ios_base/storage/2.cc: Likewise.
* testsuite/27_io/ios_base/storage/3.cc: Likewise.
* testsuite/lib/libstdc++.exp (v3-build_support): Remove IRIX 6
workaround.
libjava:
* configure.ac (libgcj_cv_exidx): Remove IRIX 6 ld workaround.
(mips-sgi-irix6*): Remove.
(mips-sgi-irix*): Remove.
(AC_CHECK_HEADERS): Remove bstring.h.
* configure: Regenerate.
* include/config.h.in: Regenerate.
* configure.host (mips-sgi-irix6*): Remove.
* include/posix-signal.h [__sgi__]: Remove.
* gnu/java/net/natPlainDatagramSocketImplPosix.cc
[HAVE_BSTRING_H]: Remove.
* gnu/java/net/natPlainDatagramSocketImplWin32.cc: Likewise.
* gnu/java/net/natPlainSocketImplPosix.cc: Likewise.
libitm:
* configure.tgt (*-*-irix6*): Remove.
libgomp:
* configure.tgt (mips-sgi-irix6*): Remove.
libgfortran:
* intrinsics/c99_functions.c [__sgi__ && !HAVE_COMPLEX_H]: Remove.
libgcc:
* config.host (mips-sgi-irix6.5*): Remove.
* config/mips/irix-crti.S: Remove.
* config/mips/irix-crtn.S: Remove.
* config/mips/irix6-unwind.h: Remove.
* config/mips/t-irix6: Remove.
* config/mips/t-slibgcc-irix: Remove.
gnattools:
* configure.ac (mips-sgi-irix*): Remove.
* configure: Regenerate.
gcc/testsuite:
* g++.dg/other/anon5.C: Don't skip on mips-sgi-irix*.
* g++.dg/tree-prof/partition1.C: Likewise.
* g++.dg/tree-prof/partition2.C: Likewise.
* g++.old-deja/g++.other/init19.C: Remove mips-sgi-irix*
handling.
* gcc.c-torture/compile/labels-3.c: Remove dg-options.
* gcc.c-torture/execute/20010724-1.c: Remove.
* gcc.c-torture/execute/20010724-1.x: Remove.
* gcc.c-torture/execute/20040208-2.c: Remove.
* gcc.c-torture/execute/20040208-2.x: Remove.
* gcc.c-torture/execute/ieee/20000320-1.c [__mips__ && __sgi__]:
Remove.
(main) [__mips__ && __sgi__]: Remove.
* gcc.c-torture/execute/ieee/copysign1.c: Remove IRIX reference.
* gcc.c-torture/execute/ieee/copysign2.c: Likewise.
* gcc.c-torture/execute/ieee/mul-subnormal-single-1.x: Remove
mips-sgi-irix6* handling.
* gcc.dg/cpp/assert4.c [__mips__]: Remove __sgi__, sgi.
* gcc.dg/torture/20090618-1.c: Don't skip on mips-sgi-irix*.
* gcc.dg/torture/builtin-frexp-1.c: Remove mips*-*-irix6*
handling.
* gcc.dg/torture/builtin-logb-1.c: Likewise.
* gcc.dg/torture/pr47917.c: Remove mips-sgi-irix6.5 handling.
* gcc.dg/tree-ssa/ssa-store-ccp-3.c: Don't skip on mips*-*-irix*.
* gcc.misc-tests/linkage.exp: Remove mips-sgi-irix6* handling.
* gcc.target/mips/args-1.c [!__sgi__]: Remove.
* gcc.target/mips/interrupt_handler-2.c: Don't skip on
mips-sgi-irix6*.
* gcc.target/mips/interrupt_handler-3.c: Likewise.
* gcc.target/mips/save-restore-1.c: Don't skip on mips-sgi-irix6*.
* gcc.target/mips/save-restore-3.c: Likewise.
* gcc.target/mips/save-restore-4.c: Likewise.
* gcc.target/mips/save-restore-5.c: Likewise.
* gfortran.dg/g77/cabs.f: Don't xfail on mips-sgi-irix6*.
* lib/prune.exp (prune_gcc_output): Remove pruning of IRIX 6 ld
messages.
* lib/target-libpath.exp (set_ld_library_path_env_vars): Remove
IRIX 6 handling.
(restore_ld_library_path_env_vars): Likewise.
* lib/target-supports.exp (check_profiling_available): Remove
mips*-*-irix* handling.
(check_ascii_locale_available): Remove mips-sgi-irix* handling.
(add_options_for_c99_runtime): Remove mips-sgi-irix6.5* handling.
* objc.dg/stabs-1.m: Don't xfail on mips-sgi-irix6.5.
gcc/ada:
* gcc-interface/Makefile.in (mips-sgi-irix6*): Remove.
* a-intnam-irix.ads, mlib-tgt-specific-irix.adb,
s-intman-irix.adb, s-mastop-irix.adb, s-osinte-irix.adb,
s-osinte-irix.ads, s-proinf-irix-athread.adb,
s-proinf-irix-athread.ads, s-taprop-irix.adb, s-tasinf-irix.ads,
system-irix-n32.ads, system-irix-n64.ads, system-irix-o32.ads:
Remove.
* adaint.c [__mips && __sgi]: Remove.
(__gnat_number_of_cpus) [__mips && __sgi]: Remove.
[IS_CROSS && !(__mips && __sgi)]: Remove.
* adaint.h [sgi && _LFAPI]: Remove.
* cstreams.c (__gnat_full_name) [sgi]: Remove.
* env.c (__gnat_unsetenv) [__mips && __sgi]: Remove.
(__gnat_clearenv) [__mips && __sgi]: Remove.
* errno.c (_SGI_MP_SOURCE): Remove.
* gsocket.h [sgi]: Remove.
* init.c: Remove IRIX reference.
[sgi]: Remove.
* link.c [sgi]: Remove.
* s-oscons-tmplt.c [__mips && __sgi] (IOV_MAX): Don't define.
(main) [__mips && __sgi] (MAX_tv_sec): Don't define.
(CLOCK_SGI_FAST, CLOCK_SGI_CYCLE): Remove.
* sysdep.c [sgi]: Remove.
(getc_immediate_common) [sgi]: Remove.
(__gnat_localtime_tzoff) [sgi]: Remove.
* terminals.c [__mips && __sgi] (IRIX): Don't define.
[IRIX] (USE_GETPTY): Don't define.
(allocate_pty_desc) [USE_GETPTY]: Remove.
* g-traceb.ads: Remove IRIX reference.
* g-trasym.ads: Likewise.
* memtrack.adb: Likewise.
* s-interr-sigaction.adb: Likewise.
* gnat_rm.texi (Implementation Advice): Remove SGI info.
(Implementation Defined Characteristics): Likewise.
* gnat_ugn.texi (Summary of Run-Time Configurations, mips-irix):
Remove.
(Irix-Specific Considerations): Remove.
gcc/cp:
* Make-lang.in (doc/g++.1): Remove IRIX 6.5 reference.
gcc:
* config.gcc (enable_obsolete): Remove mips-sgi-irix6.5.
(mips-sgi-irix6.5*): Remove.
* config.host (mips-sgi-irix*): Remove.
* configure.ac (enable_fixed_point): Remove mips*-sgi-irix*.
(set_have_as_tls): Remove *-*-irix6*.
(gcc_cv_ld_static_dynamic): Remove mips-sgi-irix6*.
* configure: Regenerate.
* config/mips/iris6.h: Remove.
* config/mips/iris6.opt: Remove.
* config/mips/t-irix6: Remove.
* config/mips/mips.h (TARGET_GPWORD): Remove IRIX 6 N64 handling.
(TARGET_IRIX6): Remove.
(TARGET_CPU_CPP_BUILTINS): Remove IRIX 6 handling.
Don't define LANGUAGE_C, _LANGUAGE_C for Objective-C.
* config/mips/mips.c (mips_build_builtin_va_list): Remove IRIX 6
handling.
(mips_file_start): Likewise.
* config/mips/mips-protos.h (irix_asm_output_align): Remove.
* config/mips/driver-native.c [__sgi__]: Remove.
(host_detect_local_cpu) [__sgi__]: Remove.
* config/mips/gnu-user.h: Remove iris5.h reference.
* config/mips/mips-modes.def: Remove IRIX 6 reference.
* config/mips/gnu-user64.h (MIPS_TFMODE_FORMAT): Remove.
* config/mips/mips.c (mips_option_override) [MIPS_TFMODE_FORMAT]:
Remove.
* gcc.c (main): Move asm_debug initialization ...
(asm_debug): ... here.
* ginclude/stddef.h (__STDDEF_H__): Don't define.
* defaults.h (LINK_ELIMINATE_DUPLICATE_LDIRECTORIES): Remove.
* system.h (LINK_ELIMINATE_DUPLICATE_LDIRECTORIES): Poison.
* collect2.c [LINK_ELIMINATE_DUPLICATE_LDIRECTORIES]: Remove.
(main) [LINK_ELIMINATE_DUPLICATE_LDIRECTORIES]: Remove.
[LINK_ELIMINATE_DUPLICATE_LDIRECTORIES] (is_in_args): Remove.
* doc/tm.texi.in (Driver, LINK_ELIMINATE_DUPLICATE_LDIRECTORIES):
Remove.
* doc/tm.texi: Regenerate.
* doc/invoke.texi (Debugging Options, -gdwarf-<version>): Remove
IRIX 6 reference.
(MIPS Options, -march): Remove IRIX reference.
* doc/install.texi (Binaries, SGI IRIX): Remove.
(Specific, mips-sgi-irix6): Document IRIX 6.5 removal, remove rest
of section.
* doc/trouble.texi (Interoperation): Remove -lgl_s handling.
fixincludes:
* inclhack.def (broken_cabs): Remove IRIX and SunOS 4 support.
(irix___restrict): Remove.
(irix___generic1): Remove.
(irix___generic2): Remove.
(irix_asm_apostrophe): Remove.
(irix_complex): Remove.
(irix_pthread_init): Remove.
(irix_socklen_t): Remove.
(irix_stdint_c99_mode): Remove.
(irix_stdint_c99_types): Remove.
(irix_stdint_c99_macros): Remove.
(irix_stdio_va_list): Remove IRIX 6.5 support.
(irix_wcsftime): Remove.
(stdio_va_list): Remove IRIX 6.5 support.
(svr4_profil): Remove IRIX bypass.
* fixincl.x: Regenerate.
* tests/base/complex.h [IRIX_COMPLEX_CHECK]: Remove.
* tests/base/internal/math_core.h: Remove.
* tests/base/internal/sgimacros.h: Remove.
* tests/base/internal/wchar_core.h: Remove.
* tests/base/math.h [BROKEN_CABS_CHECK]: Remove IRIX and SunOS 4
support.
* tests/base/pthread.h [IRIX_PTHREAD_INIT_CHECK]: Remove.
* tests/base/stdint-irix65.h: Remove.
* tests/base/stdint.h [IRIX_STDINT_C99_MODE_CHECK]: Remove.
* tests/base/sys/asm.h: Remove.
* tests/base/sys/socket.h [IRIX_SOCKLEN_T_CHECK]: Remove.
contrib:
* config-list.mk (LIST): Remove mips-sgi-irix6.5.
toplevel:
* MAINTAINERS (OS Port Maintainers): Remove irix.
* configure.ac (enable_libgomp): Remove *-*-irix6*.
(unsupported_languages): Remove mips-sgi-irix6.*.
(noconfigdirs): Don't add ${libgcj} for mips*-*-irix6*.
(with_stabs): Remove.
* configure: Regenerate.
From-SVN: r185390
2012-03-14 17:33:37 +01:00
*-*-solaris2* | *-*-hpux11*)
[multiple changes]
2006-01-18 Richard Henderson <rth@redhat.com>
Jakub Jelinek <jakub@redhat.com>
Diego Novillo <dnovillo@redhat.com>
* libgomp: New directory.
* Makefile.def: Add target_module libgomp.
* Makefile.in: Regenerate.
* configure.in (target_libraries): Add target-libgomp.
* configure: Regenerate.
contrib/
2006-01-18 Richard Henderson <rth@redhat.com>
Diego Novillo <dnovillo@redhat.com>
* gcc_update (files_and_dependencies): Add libgomp files.
gcc/
2006-01-18 Richard Henderson <rth@redhat.com>
Aldy Hernandez <aldyh@redhat.com>
Jakub Jelinek <jakub@redhat.com>
Diego Novillo <dnovillo@redhat.com>
* omp-low.c: New file.
* c-omp.c: New file.
2006-01-18 Richard Henderson <rth@redhat.com>
Jakub Jelinek <jakub@redhat.com>
Diego Novillo <dnovillo@redhat.com>
* doc/invoke.texi: Document -fopenmp.
* tree-dump.h (debug_function): Declare.
* hooks.c (hook_bool_tree_bool_false): New function.
(hook_tree_tree_null): Remove.
(hook_tree_tree_tree_null): New.
* hooks.h: Update to match.
* tree-pretty-print.c (debug_tree_chain): New.
(print_generic_expr): Handle TDF_CHAIN.
(dump_generic_node): Handle BLOCK.
Do not abort with incomplete SWITCH_EXPRs.
Do not dump body of an OpenMP directive if TDF_SLIM is given.
<case OMP_PARALLEL, OMP_FOR, OMP_SECTIONS>: Don't
print space after directive name.
<OMP_FOR>: Handle printing OMP_FOR_PRE_BODY.
Handle OMP_MASTER and OMP_ORDERED.
Handle printing of OMP_BODY just in one place, goto
dump_omp_body in the rest of OMP_* nodes that have
OMP_BODY.
Don't handle clause nodes here. Update omp statements to
use dump_omp_clauses.
Handle OMP_SINGLE, OMP_SECTIONS, OMP_SECTION,
OMP_CLAUSE_ORDERED, OMP_CLAUSE_SCHEDULE, OMP_ATOMIC,
OMP_CRITICAL, OMP_CLAUSE_NOWAIT, GOMP_CLAUSE_IF,
GOMP_CLAUSE_NUM_THREADS, GOMP_FOR, GOMP_CLAUSE_SHARED,
GOMP_CLAUSE_FIRSTPRIVATE, GOMP_CLAUSE_LASTPRIVATE,
GOMP_CLAUSE_COPYIN and GOMP_CLAUSE_COPYPRIVATE.
Adjust output for GOMP_PARALLEL.
(dump_omp_clauses): New.
(print_declaration): Dump DECL_VALUE_EXPR.
(op_symbol_1): Split out of op_symbol.
(dumping_stmts): Remove. Update all users.
* cgraph.c (cgraph_analyze_queue): New.
(cgraph_add_new_function): New.
* cgraph.h (cgraph_analyze_queue): Declare.
(cgraph_add_new_function): Declare.
(cgraph_lower_function): Remove.
* tree.c (walk_tree): Walk OMP_CLAUSE_CHAIN of OMP_CLAUSE_*
nodes. Use switch for all nodes, handle most of IS_EXPR_CODE_CLASS
and TYPE_P nodes in its default clause.
(empty_body_p): New.
(tree_range_check_failed): New.
(build5_stat): New.
* tree.h (OMP_CLAUSE_REDUCTION_INIT,
OMP_CLAUSE_REDUCTION_MERGE,
OMP_CLAUSE_REDUCTION_PLACEHOLDER,
OMP_CLAUSE_PRIVATE_DEBUG,
OMP_CLAUSE_LASTPRIVATE_FIRSTPRIVATE, OMP_FOR_PRE_BODY,
OMP_MASTER_BODY, OMP_ORDERED_BODY OMP_BODY,
OMP_CLAUSES, OMP_CLAUSE_DECL, OMP_CLAUSE_DEFAULT_KIND,
OMP_CLAUSE_CHAIN, OMP_CLAUSE_OUTER_DECL,
OMP_CLAUSE_INNER_DECL, OMP_CLAUSE_NUM_THREADS_EXPR,
OMP_CLAUSE_IF_EXPR, OMP_CLAUSE_SCHEDULE_CHUNK_EXPR,
OMP_CLAUSE_SCHEDULE_CHUNK_SIZE. OMP_PARALLEL_VAR_INIT,
OMP_PARALLEL_VAR_REDUC, OMP_FOR_VAR_INIT,
OMP_FOR_VAR_LAST, OMP_FOR_VAR_REDUC,
OMP_SECTIONS_VAR_INIT, OMP_SECTIONS_VAR_LAST,
OMP_SECTIONS_VAR_REDUC, OMP_CLAUSE_REDUCTION_CODE
OMP_SINGLE_CLAUSES, OMP_SINGLE_BODY,
OMP_CLAUSE_SCHEDULE_CHUNK_SIZE, OMP_SECTION_BODY,
OMP_CRITICAL_NAME, OMP_CRITICAL_BODY): New.
(TREE_RANGE_CHECK): New.
(empty_body_p): Declare.
(enum omp_clause_default_kind): New.
(build_string_literal): Declare.
(enum omp_clause_schedule_kind, OMP_CLAUSE_SCHEDULE_KIND): New.
(build5_stat, build5): Declare.
* tree-pass.h (TDF_CHAIN): Define.
* tree-pass.h (PROP_gimple_lomp): Define.
(pass_lower_omp): Declare.
* diagnostic.h (debug_tree_chain): Declare.
* builtins.c (get_builtin_sync_mode): Use 0 as last argument to
mode_for_size.
(expand_builtin): Handle sync BUILT_IN_*_16 builtins.
* builtins.c (build_string_literal): Make extern.
* gcc.c (include_spec_function): New.
(static_spec_functions): Add it.
(main): Move load of libgomp.spec ...
(LINK_COMMAND_SPEC): ... here.
(link_gomp_spec): New.
(static_specs): Include it.
(LINK_COMMAND_SPEC): Add link_gomp.
(GOMP_SELF_SPECS): New.
(driver_self_specs): Include it.
(switch_matches): Don't mark inline.
(main): Load libgomp.spec.
* tree-gimple.c (is_gimple_stmt): True for OMP_MASTER,
OMP_ORDERED, OMP_CRITICAL, OMP_SECTIONS, OMP_SECTION,
and OMP_SINGLE, OMP_FOR and OMP_PARALLEL.
* tree-gimple.h (enum omp_parallel): Declare.
(determine_parallel_type): Declare.
(omp_firstprivatize_variable): Declare.
(omp_reduction_init): Declare.
(diagnose_omp_structured_block_errors): Declare.
(struct walk_stmt_info): Add want_return_expr.
(struct walk_stmt_info): Add want_bind_expr, want_locations.
(find_omp_clause): Declare.
(insert_field_into_struct): Declare.
(struct walk_stmt_info): Move from tree-nested.c
(walk_stmts): Declare.
* c-cppbuiltin.c (c_cpp_builtins): If -fopenmp, #define _OPENMP
to 200505.
* cgraphunit.c (cgraph_lower_function): Make static.
(cgraph_finalize_pending_functions): New.
(cgraph_finalize_function): Call it.
(cgraph_finalize_compilation_unit): Likewise.
* builtin-types.def (BT_I16, BT_FN_I16_VPTR_I16,
BT_FN_BOOL_VPTR_I16_I16, BT_FN_I16_VPTR_I16_I16): Add.
(BT_FN_UINT_UINT): New.
(DEF_FUNCTION_TYPE_6, DEF_FUNCTION_TYPE_7,
DEF_FUNCTION_TYPE_VAR_4): Document.
(BT_PTR_LONG, BT_PTR_PTR, BT_FN_BOOL, BT_FN_INT,
BT_FN_VOID_PTRPTR, BT_PTR_FN_VOID_PTR,
BT_FN_BOOL_LONGPTR_LONGPTR, BT_FN_VOID_OMPFN_PTR_UINT,
BT_FN_VOID_OMPFN_PTR_UINT_UINT,
BT_FN_BOOL_LONG_LONG_LONG_LONGPTR_LONGPTR,
BT_FN_BOOL_LONG_LONG_LONG_LONG_LONGPTR_LONGPTR,
BT_FN_VOID_OMPFN_PTR_UINT_LONG_LONG_LONG,
BT_FN_VOID_OMPFN_PTR_UINT_LONG_LONG_LONG_LONG): New.
* builtins.def: Update DEF_BUILTIN comment to include COND argument.
Move all DEF_SYNC_BUILTIN () and DEF_GOMP_BUILTIN () builtins
into separate files.
(DEF_GOMP_BUILTIN): New.
(BUILT_IN_OMP_GET_THREAD_NUM, BUILT_IN_GOMP_BARRIER,
BUILT_IN_GOMP_CRITICAL_START, BUILT_IN_GOMP_CRITICAL_END,
BUILT_IN_GOMP_CRITICAL_NAME_START, BUILT_IN_GOMP_CRITICAL_NAME_END,
BUILT_IN_GOMP_LOOP_STATIC_START, BUILT_IN_GOMP_LOOP_DYNAMIC_START,
BUILT_IN_GOMP_LOOP_GUIDED_START, BUILT_IN_GOMP_LOOP_RUNTIME_START,
BUILT_IN_GOMP_LOOP_ORDERED_STATIC_START,
BUILT_IN_GOMP_LOOP_ORDERED_DYNAMIC_START,
BUILT_IN_GOMP_LOOP_ORDERED_GUIDED_START,
BUILT_IN_GOMP_LOOP_ORDERED_RUNTIME_START,
BUILT_IN_GOMP_LOOP_STATIC_NEXT, BUILT_IN_GOMP_LOOP_DYNAMIC_NEXT,
BUILT_IN_GOMP_LOOP_GUIDED_NEXT, BUILT_IN_GOMP_LOOP_RUNTIME_NEXT,
BUILT_IN_GOMP_LOOP_ORDERED_STATIC_NEXT,
BUILT_IN_GOMP_LOOP_ORDERED_DYNAMIC_NEXT,
BUILT_IN_GOMP_LOOP_ORDERED_GUIDED_NEXT,
BUILT_IN_GOMP_LOOP_ORDERED_RUNTIME_NEXT,
BUILT_IN_GOMP_PARALLEL_LOOP_STATIC_START,
BUILT_IN_GOMP_PARALLEL_LOOP_DYNAMIC_START,
BUILT_IN_GOMP_PARALLEL_LOOP_GUIDED_START,
BUILT_IN_GOMP_PARALLEL_LOOP_RUNTIME_START,
BUILT_IN_GOMP_LOOP_END, BUILT_IN_GOMP_LOOP_END_NOWAIT,
BUILT_IN_GOMP_ORDERED_START, BUILT_IN_GOMP_ORDERED_END,
BUILT_IN_GOMP_PARALLEL_START, BUILT_IN_GOMP_PARALLEL_END,
BUILT_IN_GOMP_SECTIONS_START, BUILT_IN_GOMP_SECTIONS_NEXT,
BUILT_IN_GOMP_PARALLEL_SECTIONS_START, BUILT_IN_GOMP_SECTIONS_END,
BUILT_IN_GOMP_SECTIONS_END_NOWAIT, BUILT_IN_GOMP_SINGLE_START,
BUILT_IN_GOMP_SINGLE_COPY_START, BUILT_IN_GOMP_SINGLE_COPY_END): New.
* sync-builtins.def: New file, moved from builtins.def.
* omp-builtins.def: New file, moved from builtins.def.
* c-objc-common.h (LANG_HOOKS_OMP_PREDETERMINED_SHARING): Redefine.
* gimple-low.c (lower_function_body): Clear data.
(lower_stmt): Do not handle COMPOUND_EXPR.
Remove call to print_node_brief.
* c-tree.h (c_finish_omp_clauses): New prototype.
(C_DECL_THREADPRIVATE_P): Define.
(lookup_name_no_remap, c_omp_remap_private): Remove
(c_begin_omp_parallel, c_finish_omp_parallel): Update.
(check_for_loop_decls): Update decl.
(lookup_name_no_remap, c_omp_remap_private): Declare.
(build_indirect_ref, build_modify_expr, pushdecl,
pushdecl_top_level): Move to c-common.h.
* dwarf2out.c (loc_descriptor_from_tree_1): Don't set unsignedp
before the switch, but just in the 2 places that need it.
* c-decl.c (diagnose_mismatched_decls): Do not check for
mismatched thread-local attributes when OLDDECL is marked
threadprivate and NEWDECL has no thread-local attributes.
(merge_decls): Merge C_DECL_THREADPRIVATE_P.
(c_gimple_diagnostics_recursively): Rename from
c_warn_unused_result_recursively. Invoke
diagnose_omp_structured_block_errors.
(check_for_loop_decls): Return a singular decl found.
* langhooks.c (lhd_omp_predetermined_sharing): Return
OMP_CLAUSE_DEFAULT_SHARED for DECL_ARTIFICIAL decls.
(lhd_omp_firstprivatize_type_sizes): New.
(lhd_omp_assignment): New.
(lhd_omp_predetermined_sharing): New.
* langhooks.h (struct gimplify_omp_ctx): Forward declare.
(struct lang_hooks_for_types): Add
omp_firstprivatize_type_sizes, omp_privatize_by_reference,
omp_predetermined_sharing, omp_disregard_value_expr,
omp_private_debug_clause, omp_clause_default_ctor,
omp_clause_copy_ctor, omp_clause_assign_op, omp_clause_dtor.
(c_finish_omp_clauses): New.
(c_finish_bc_stmt): Diagnose break within omp for.
(c_begin_omp_parallel, c_finish_omp_parallel): New.
(build_unary_op): Return error_mark after reporting
a readonly_error.
(build_modify_expr): Likewise.
* gimplify.c: Include optabs.h and pointer-set.h.
(enum gimplify_omp_var_data): Declare.
(struct gimplify_omp_ctx): Declare.
(struct gimplify_ctx): Add fields prev_context, combined_pre_p
and combined_ctxp.
(gimplify_ctxp, gimplify_omp_ctxp): New local variables.
(push_gimplify_context, pop_gimplify_context): Allow nesting.
(splay_tree_compare_decl_uid): New.
(new_omp_context): New.
(delete_omp_context): New.
(gimple_add_tmp_var): Call omp_add_variable.
(gimplify_bind_expr): Likewise.
(gimplify_var_or_parm_decl): If omp_notice_variable returned
true, disregard DECL_VALUE_EXPR on the decl if any.
(gimplify_expr_in_ctx): New.
(omp_firstprivatize_variable, omp_firstprivatize_type_sizes
omp_add_variable, omp_notice_variable, omp_is_private
gimplify_scan_omp_clauses, gimplify_adjust_omp_clauses_1
gimplify_adjust_omp_clauses, gimplify_omp_parallel
gimplify_omp_for, gimplify_omp_workshare, goa_lhs_expr_p
gimplify_omp_atomic_fetch_op, goa_stabilize_expr
gimplify_omp_atomic_pipeline, gimplify_omp_atomic_mutex
gimplify_omp_atomic): New.
(gimplify_expr): Handle OMP_PARALLEL, OMP_FOR, OMP_SECTIONS,
OMP_SINGLE, OMP_SECTION, OMP_MASTER, OMP_ORDERED,
OMP_CRITICAL and OMP_ATOMIC.
(gimplify_body): Verify gimplify_ctxp is empty after gimplification.
* c-pragma.h (enum pragma_kind): Add
PRAGMA_OMP_ATOMIC, PRAGMA_OMP_BARRIER,
PRAGMA_OMP_CRITICAL, PRAGMA_OMP_FLUSH, PRAGMA_OMP_FOR,
PRAGMA_OMP_MASTER, PRAGMA_OMP_ORDERED,
PRAGMA_OMP_PARALLEL, PRAGMA_OMP_PARALLEL_FOR,
PRAGMA_OMP_PARALLEL_SECTIONS, PRAGMA_OMP_SECTION,
PRAGMA_OMP_SECTIONS, PRAGMA_OMP_SINGLE,
PRAGMA_OMP_THREADPRIVATE.
* tree.def (OMP_PARALLEL, OMP_FOR, OMP_SECTIONS,
OMP_SINGLE, OMP_SECTION, OMP_MASTER, OMP_ORDERED,
OMP_CRITICAL, OMP_ATOMIC, OMP_CLAUSE_PRIVATE,
OMP_CLAUSE_SHARED, OMP_CLAUSE_FIRSTPRIVATE,
OMP_CLAUSE_LASTPRIVATE, OMP_CLAUSE_REDUCTION,
OMP_CLAUSE_COPYIN, OMP_CLAUSE_COPYPRIVATE,
OMP_CLAUSE_IF, OMP_CLAUSE_NUM_THREADS,
OMP_CLAUSE_SCHEDULE, OMP_CLAUSE_NOWAIT,
OMP_CLAUSE_ORDERED, OMP_CLAUSE_DEFAULT): Define.
* print-tree.c (print_node): Dump DECL_VALUE_EXPR.
* tree-ssa-dce.c (find_control_dependence): Do not assume that
ENTRY_BLOCK_PTR->next_bb == single_succ (ENTRY_BLOCK_PTR).
* tree-nested.c (convert_call_expr): Call walk_body on OMP_BODY for
OpenMP directives.
(struct nesting_info): Add field_map,
suppress_expansion, debug_var_chain.
(create_nesting_tree): Initialize them.
(lookup_field_for_decl): Use field_map.
(get_nonlocal_debug_decl, get_local_debug_decl): New.
(convert_local_omp_clauses): New.
(finalize_nesting_tree_1): Add debug_var_chain to toplevel block.
(walk_body): Split out of walk_function.
(convert_nonlocal_omp_clauses, convert_local_omp_clauses): New.
(convert_nonlocal_reference): Handle omp statements.
(convert_local_reference): Likewise.
(unnest_nesting_tree_1): Split out of finalize_nesting_tree_1.
(unnest_nesting_tree): New.
(lower_nested_functions): Call it.
(insert_field_into_struct): Make extern.
(struct walk_stmt_info): Move to tree-gimple.h.
(walk_stmts): Make extern.
* omp-builtins.def: New file.
* tree-iterator.c (expr_only): Clarify comment.
* c-common.h (pushdecl_top_level, pushdecl,
build_modify_expr, build_indirect_ref,
c_finish_omp_master, c_finish_omp_critical,
c_finish_omp_ordered, c_finish_omp_barrier,
c_finish_omp_atomic, c_finish_omp_flush,
c_finish_omp_for, c_split_parallel_clauses,
omp_clause_default_kind, c_omp_sharing_predetermined,
c_omp_remap_decl): Declare.
* Makefile.in (BUILTINS_DEF): Add omp-builtins.def.
(OBJS-common): Add omp-low.o.
(c-omp.o, omp-low.o): Add.
(gimplify.o): Add dependency on $(OPTABS_H).
(GTFILES): Add omp-low.c.
(gt-stringpool.h): Add.
* tree-cfg.c (set_bb_for_stmt): Do not update the
block-to-labels map if we are currently expanding to RTL.
(tree_node_can_be_shared): Remove unnecessary CONSTANT_CLASS_P
checks.
Handle IDENTIFIER_NODE.
(tree_verify_flow_info): Do not ICE when emitting error
messages about invalid labels.
(dump_function_to_file): Reset CFUN before emitting the body
of the function.
(debug_function): New.
* passes.c (init_optimization_passes): Schedule
pass_lower_omp.
* langhooks-def.h (lhd_omp_predetermined_sharing,
lhd_omp_assignment, lhd_omp_firstprivatize_type_sizes):
Declare.
(LANG_HOOKS_OMP_FIRSTPRIVATIZE_TYPE_SIZES): Define.
(LANG_HOOKS_FOR_TYPES_INITIALIZER): Use it.
(LANG_HOOKS_OMP_PRIVATIZE_BY_REFERENCE,
LANG_HOOKS_OMP_PREDETERMINED_SHARING,
LANG_HOOKS_OMP_DISREGARD_VALUE_EXPR,
LANG_HOOKS_OMP_PRIVATE_DEBUG_CLAUSE,
LANG_HOOKS_OMP_CLAUSE_DEFAULT_CTOR,
LANG_HOOKS_OMP_CLAUSE_COPY_CTOR,
LANG_HOOKS_OMP_CLAUSE_ASSIGN_OP,
LANG_HOOKS_OMP_CLAUSE_DTOR): Define.
(LANG_HOOK_DECLS): Use them.
2006-01-18 Dmitry Kurochkin <dmitry.kurochkin@gmail.com>
Richard Henderson <rth@redhat.com>
Jakub Jelinek <jakub@redhat.com>
Diego Novillo <dnovillo@redhat.com>
* c-parser.c (pragma_omp_clause): Define.
(c_parser_declaration_or_fndef): Document OpenMP syntax.
(c_parser_compound_statement): Likewise.
(c_parser_statement): Likewise.
(c_parser_pragma): Handle omp pragmas.
(OMP_FOR_CLAUSE_MASK, OMP_SECTIONS_CLAUSE_MASK,
OMP_PARALLEL_CLAUSE_MASK, OMP_SINGLE_CLAUSE_MASK): Define.
(c_parser_omp_clause_name, check_no_duplicate_clause,
c_parser_omp_variable_list,
c_parser_omp_var_list_parens, c_parser_omp_clause_copyin,
c_parser_omp_clause_copyprivate,
c_parser_omp_clause_default,
c_parser_omp_clause_firstprivate, c_parser_omp_clause_if,
c_parser_omp_clause_lastprivate,
c_parser_omp_clause_nowait,
c_parser_omp_clause_num_threads,
c_parser_omp_clause_ordered, c_parser_omp_clause_private,
c_parser_omp_clause_reduction,
c_parser_omp_clause_schedule, c_parser_omp_clause_shared,
c_parser_omp_all_clauses, c_parser_omp_structured_block,
c_parser_omp_atomic, c_parser_omp_barrier,
c_parser_omp_critical, c_parser_omp_flush,
c_parser_omp_for_loop, c_parser_omp_for,
c_parser_omp_master, c_parser_omp_ordered,
c_parser_omp_sections_scope, c_parser_omp_sections,
c_parser_omp_parallel, c_parser_omp_single,
c_parser_omp_construct, c_parser_omp_threadprivate): New.
* c-pragma.c (init_pragma): Do omp pragma registration here.
* c.opt (fopenmp): New flag.
2006-01-18 Eric Christopher <echristo@apple.com>
* gcc.c (GOMP_SELF_SPECS): Bracket in #ifndef/#endif.
* config/darwin.h (GOMP_SELF_SPECS): Define.
testsuite/
2006-01-18 Richard Henderson <rth@redhat.com>
Aldy Hernandez <aldyh@redhat.com>
Jakub Jelinek <jakub@redhat.com>
Diego Novillo <dnovillo@redhat.com>
Uros Bizjak <uros@kss-loka.si>
* testsuite/gcc.dg/gomp: New directory.
From-SVN: r109902
2006-01-18 20:21:25 +01:00
;;
2006-02-12 17:24:23 +01:00
*-*-darwin* | *-*-aix*)
[multiple changes]
2006-01-18 Richard Henderson <rth@redhat.com>
Jakub Jelinek <jakub@redhat.com>
Diego Novillo <dnovillo@redhat.com>
* libgomp: New directory.
* Makefile.def: Add target_module libgomp.
* Makefile.in: Regenerate.
* configure.in (target_libraries): Add target-libgomp.
* configure: Regenerate.
contrib/
2006-01-18 Richard Henderson <rth@redhat.com>
Diego Novillo <dnovillo@redhat.com>
* gcc_update (files_and_dependencies): Add libgomp files.
gcc/
2006-01-18 Richard Henderson <rth@redhat.com>
Aldy Hernandez <aldyh@redhat.com>
Jakub Jelinek <jakub@redhat.com>
Diego Novillo <dnovillo@redhat.com>
* omp-low.c: New file.
* c-omp.c: New file.
2006-01-18 Richard Henderson <rth@redhat.com>
Jakub Jelinek <jakub@redhat.com>
Diego Novillo <dnovillo@redhat.com>
* doc/invoke.texi: Document -fopenmp.
* tree-dump.h (debug_function): Declare.
* hooks.c (hook_bool_tree_bool_false): New function.
(hook_tree_tree_null): Remove.
(hook_tree_tree_tree_null): New.
* hooks.h: Update to match.
* tree-pretty-print.c (debug_tree_chain): New.
(print_generic_expr): Handle TDF_CHAIN.
(dump_generic_node): Handle BLOCK.
Do not abort with incomplete SWITCH_EXPRs.
Do not dump body of an OpenMP directive if TDF_SLIM is given.
<case OMP_PARALLEL, OMP_FOR, OMP_SECTIONS>: Don't
print space after directive name.
<OMP_FOR>: Handle printing OMP_FOR_PRE_BODY.
Handle OMP_MASTER and OMP_ORDERED.
Handle printing of OMP_BODY just in one place, goto
dump_omp_body in the rest of OMP_* nodes that have
OMP_BODY.
Don't handle clause nodes here. Update omp statements to
use dump_omp_clauses.
Handle OMP_SINGLE, OMP_SECTIONS, OMP_SECTION,
OMP_CLAUSE_ORDERED, OMP_CLAUSE_SCHEDULE, OMP_ATOMIC,
OMP_CRITICAL, OMP_CLAUSE_NOWAIT, GOMP_CLAUSE_IF,
GOMP_CLAUSE_NUM_THREADS, GOMP_FOR, GOMP_CLAUSE_SHARED,
GOMP_CLAUSE_FIRSTPRIVATE, GOMP_CLAUSE_LASTPRIVATE,
GOMP_CLAUSE_COPYIN and GOMP_CLAUSE_COPYPRIVATE.
Adjust output for GOMP_PARALLEL.
(dump_omp_clauses): New.
(print_declaration): Dump DECL_VALUE_EXPR.
(op_symbol_1): Split out of op_symbol.
(dumping_stmts): Remove. Update all users.
* cgraph.c (cgraph_analyze_queue): New.
(cgraph_add_new_function): New.
* cgraph.h (cgraph_analyze_queue): Declare.
(cgraph_add_new_function): Declare.
(cgraph_lower_function): Remove.
* tree.c (walk_tree): Walk OMP_CLAUSE_CHAIN of OMP_CLAUSE_*
nodes. Use switch for all nodes, handle most of IS_EXPR_CODE_CLASS
and TYPE_P nodes in its default clause.
(empty_body_p): New.
(tree_range_check_failed): New.
(build5_stat): New.
* tree.h (OMP_CLAUSE_REDUCTION_INIT,
OMP_CLAUSE_REDUCTION_MERGE,
OMP_CLAUSE_REDUCTION_PLACEHOLDER,
OMP_CLAUSE_PRIVATE_DEBUG,
OMP_CLAUSE_LASTPRIVATE_FIRSTPRIVATE, OMP_FOR_PRE_BODY,
OMP_MASTER_BODY, OMP_ORDERED_BODY OMP_BODY,
OMP_CLAUSES, OMP_CLAUSE_DECL, OMP_CLAUSE_DEFAULT_KIND,
OMP_CLAUSE_CHAIN, OMP_CLAUSE_OUTER_DECL,
OMP_CLAUSE_INNER_DECL, OMP_CLAUSE_NUM_THREADS_EXPR,
OMP_CLAUSE_IF_EXPR, OMP_CLAUSE_SCHEDULE_CHUNK_EXPR,
OMP_CLAUSE_SCHEDULE_CHUNK_SIZE. OMP_PARALLEL_VAR_INIT,
OMP_PARALLEL_VAR_REDUC, OMP_FOR_VAR_INIT,
OMP_FOR_VAR_LAST, OMP_FOR_VAR_REDUC,
OMP_SECTIONS_VAR_INIT, OMP_SECTIONS_VAR_LAST,
OMP_SECTIONS_VAR_REDUC, OMP_CLAUSE_REDUCTION_CODE
OMP_SINGLE_CLAUSES, OMP_SINGLE_BODY,
OMP_CLAUSE_SCHEDULE_CHUNK_SIZE, OMP_SECTION_BODY,
OMP_CRITICAL_NAME, OMP_CRITICAL_BODY): New.
(TREE_RANGE_CHECK): New.
(empty_body_p): Declare.
(enum omp_clause_default_kind): New.
(build_string_literal): Declare.
(enum omp_clause_schedule_kind, OMP_CLAUSE_SCHEDULE_KIND): New.
(build5_stat, build5): Declare.
* tree-pass.h (TDF_CHAIN): Define.
* tree-pass.h (PROP_gimple_lomp): Define.
(pass_lower_omp): Declare.
* diagnostic.h (debug_tree_chain): Declare.
* builtins.c (get_builtin_sync_mode): Use 0 as last argument to
mode_for_size.
(expand_builtin): Handle sync BUILT_IN_*_16 builtins.
* builtins.c (build_string_literal): Make extern.
* gcc.c (include_spec_function): New.
(static_spec_functions): Add it.
(main): Move load of libgomp.spec ...
(LINK_COMMAND_SPEC): ... here.
(link_gomp_spec): New.
(static_specs): Include it.
(LINK_COMMAND_SPEC): Add link_gomp.
(GOMP_SELF_SPECS): New.
(driver_self_specs): Include it.
(switch_matches): Don't mark inline.
(main): Load libgomp.spec.
* tree-gimple.c (is_gimple_stmt): True for OMP_MASTER,
OMP_ORDERED, OMP_CRITICAL, OMP_SECTIONS, OMP_SECTION,
and OMP_SINGLE, OMP_FOR and OMP_PARALLEL.
* tree-gimple.h (enum omp_parallel): Declare.
(determine_parallel_type): Declare.
(omp_firstprivatize_variable): Declare.
(omp_reduction_init): Declare.
(diagnose_omp_structured_block_errors): Declare.
(struct walk_stmt_info): Add want_return_expr.
(struct walk_stmt_info): Add want_bind_expr, want_locations.
(find_omp_clause): Declare.
(insert_field_into_struct): Declare.
(struct walk_stmt_info): Move from tree-nested.c
(walk_stmts): Declare.
* c-cppbuiltin.c (c_cpp_builtins): If -fopenmp, #define _OPENMP
to 200505.
* cgraphunit.c (cgraph_lower_function): Make static.
(cgraph_finalize_pending_functions): New.
(cgraph_finalize_function): Call it.
(cgraph_finalize_compilation_unit): Likewise.
* builtin-types.def (BT_I16, BT_FN_I16_VPTR_I16,
BT_FN_BOOL_VPTR_I16_I16, BT_FN_I16_VPTR_I16_I16): Add.
(BT_FN_UINT_UINT): New.
(DEF_FUNCTION_TYPE_6, DEF_FUNCTION_TYPE_7,
DEF_FUNCTION_TYPE_VAR_4): Document.
(BT_PTR_LONG, BT_PTR_PTR, BT_FN_BOOL, BT_FN_INT,
BT_FN_VOID_PTRPTR, BT_PTR_FN_VOID_PTR,
BT_FN_BOOL_LONGPTR_LONGPTR, BT_FN_VOID_OMPFN_PTR_UINT,
BT_FN_VOID_OMPFN_PTR_UINT_UINT,
BT_FN_BOOL_LONG_LONG_LONG_LONGPTR_LONGPTR,
BT_FN_BOOL_LONG_LONG_LONG_LONG_LONGPTR_LONGPTR,
BT_FN_VOID_OMPFN_PTR_UINT_LONG_LONG_LONG,
BT_FN_VOID_OMPFN_PTR_UINT_LONG_LONG_LONG_LONG): New.
* builtins.def: Update DEF_BUILTIN comment to include COND argument.
Move all DEF_SYNC_BUILTIN () and DEF_GOMP_BUILTIN () builtins
into separate files.
(DEF_GOMP_BUILTIN): New.
(BUILT_IN_OMP_GET_THREAD_NUM, BUILT_IN_GOMP_BARRIER,
BUILT_IN_GOMP_CRITICAL_START, BUILT_IN_GOMP_CRITICAL_END,
BUILT_IN_GOMP_CRITICAL_NAME_START, BUILT_IN_GOMP_CRITICAL_NAME_END,
BUILT_IN_GOMP_LOOP_STATIC_START, BUILT_IN_GOMP_LOOP_DYNAMIC_START,
BUILT_IN_GOMP_LOOP_GUIDED_START, BUILT_IN_GOMP_LOOP_RUNTIME_START,
BUILT_IN_GOMP_LOOP_ORDERED_STATIC_START,
BUILT_IN_GOMP_LOOP_ORDERED_DYNAMIC_START,
BUILT_IN_GOMP_LOOP_ORDERED_GUIDED_START,
BUILT_IN_GOMP_LOOP_ORDERED_RUNTIME_START,
BUILT_IN_GOMP_LOOP_STATIC_NEXT, BUILT_IN_GOMP_LOOP_DYNAMIC_NEXT,
BUILT_IN_GOMP_LOOP_GUIDED_NEXT, BUILT_IN_GOMP_LOOP_RUNTIME_NEXT,
BUILT_IN_GOMP_LOOP_ORDERED_STATIC_NEXT,
BUILT_IN_GOMP_LOOP_ORDERED_DYNAMIC_NEXT,
BUILT_IN_GOMP_LOOP_ORDERED_GUIDED_NEXT,
BUILT_IN_GOMP_LOOP_ORDERED_RUNTIME_NEXT,
BUILT_IN_GOMP_PARALLEL_LOOP_STATIC_START,
BUILT_IN_GOMP_PARALLEL_LOOP_DYNAMIC_START,
BUILT_IN_GOMP_PARALLEL_LOOP_GUIDED_START,
BUILT_IN_GOMP_PARALLEL_LOOP_RUNTIME_START,
BUILT_IN_GOMP_LOOP_END, BUILT_IN_GOMP_LOOP_END_NOWAIT,
BUILT_IN_GOMP_ORDERED_START, BUILT_IN_GOMP_ORDERED_END,
BUILT_IN_GOMP_PARALLEL_START, BUILT_IN_GOMP_PARALLEL_END,
BUILT_IN_GOMP_SECTIONS_START, BUILT_IN_GOMP_SECTIONS_NEXT,
BUILT_IN_GOMP_PARALLEL_SECTIONS_START, BUILT_IN_GOMP_SECTIONS_END,
BUILT_IN_GOMP_SECTIONS_END_NOWAIT, BUILT_IN_GOMP_SINGLE_START,
BUILT_IN_GOMP_SINGLE_COPY_START, BUILT_IN_GOMP_SINGLE_COPY_END): New.
* sync-builtins.def: New file, moved from builtins.def.
* omp-builtins.def: New file, moved from builtins.def.
* c-objc-common.h (LANG_HOOKS_OMP_PREDETERMINED_SHARING): Redefine.
* gimple-low.c (lower_function_body): Clear data.
(lower_stmt): Do not handle COMPOUND_EXPR.
Remove call to print_node_brief.
* c-tree.h (c_finish_omp_clauses): New prototype.
(C_DECL_THREADPRIVATE_P): Define.
(lookup_name_no_remap, c_omp_remap_private): Remove
(c_begin_omp_parallel, c_finish_omp_parallel): Update.
(check_for_loop_decls): Update decl.
(lookup_name_no_remap, c_omp_remap_private): Declare.
(build_indirect_ref, build_modify_expr, pushdecl,
pushdecl_top_level): Move to c-common.h.
* dwarf2out.c (loc_descriptor_from_tree_1): Don't set unsignedp
before the switch, but just in the 2 places that need it.
* c-decl.c (diagnose_mismatched_decls): Do not check for
mismatched thread-local attributes when OLDDECL is marked
threadprivate and NEWDECL has no thread-local attributes.
(merge_decls): Merge C_DECL_THREADPRIVATE_P.
(c_gimple_diagnostics_recursively): Rename from
c_warn_unused_result_recursively. Invoke
diagnose_omp_structured_block_errors.
(check_for_loop_decls): Return a singular decl found.
* langhooks.c (lhd_omp_predetermined_sharing): Return
OMP_CLAUSE_DEFAULT_SHARED for DECL_ARTIFICIAL decls.
(lhd_omp_firstprivatize_type_sizes): New.
(lhd_omp_assignment): New.
(lhd_omp_predetermined_sharing): New.
* langhooks.h (struct gimplify_omp_ctx): Forward declare.
(struct lang_hooks_for_types): Add
omp_firstprivatize_type_sizes, omp_privatize_by_reference,
omp_predetermined_sharing, omp_disregard_value_expr,
omp_private_debug_clause, omp_clause_default_ctor,
omp_clause_copy_ctor, omp_clause_assign_op, omp_clause_dtor.
(c_finish_omp_clauses): New.
(c_finish_bc_stmt): Diagnose break within omp for.
(c_begin_omp_parallel, c_finish_omp_parallel): New.
(build_unary_op): Return error_mark after reporting
a readonly_error.
(build_modify_expr): Likewise.
* gimplify.c: Include optabs.h and pointer-set.h.
(enum gimplify_omp_var_data): Declare.
(struct gimplify_omp_ctx): Declare.
(struct gimplify_ctx): Add fields prev_context, combined_pre_p
and combined_ctxp.
(gimplify_ctxp, gimplify_omp_ctxp): New local variables.
(push_gimplify_context, pop_gimplify_context): Allow nesting.
(splay_tree_compare_decl_uid): New.
(new_omp_context): New.
(delete_omp_context): New.
(gimple_add_tmp_var): Call omp_add_variable.
(gimplify_bind_expr): Likewise.
(gimplify_var_or_parm_decl): If omp_notice_variable returned
true, disregard DECL_VALUE_EXPR on the decl if any.
(gimplify_expr_in_ctx): New.
(omp_firstprivatize_variable, omp_firstprivatize_type_sizes
omp_add_variable, omp_notice_variable, omp_is_private
gimplify_scan_omp_clauses, gimplify_adjust_omp_clauses_1
gimplify_adjust_omp_clauses, gimplify_omp_parallel
gimplify_omp_for, gimplify_omp_workshare, goa_lhs_expr_p
gimplify_omp_atomic_fetch_op, goa_stabilize_expr
gimplify_omp_atomic_pipeline, gimplify_omp_atomic_mutex
gimplify_omp_atomic): New.
(gimplify_expr): Handle OMP_PARALLEL, OMP_FOR, OMP_SECTIONS,
OMP_SINGLE, OMP_SECTION, OMP_MASTER, OMP_ORDERED,
OMP_CRITICAL and OMP_ATOMIC.
(gimplify_body): Verify gimplify_ctxp is empty after gimplification.
* c-pragma.h (enum pragma_kind): Add
PRAGMA_OMP_ATOMIC, PRAGMA_OMP_BARRIER,
PRAGMA_OMP_CRITICAL, PRAGMA_OMP_FLUSH, PRAGMA_OMP_FOR,
PRAGMA_OMP_MASTER, PRAGMA_OMP_ORDERED,
PRAGMA_OMP_PARALLEL, PRAGMA_OMP_PARALLEL_FOR,
PRAGMA_OMP_PARALLEL_SECTIONS, PRAGMA_OMP_SECTION,
PRAGMA_OMP_SECTIONS, PRAGMA_OMP_SINGLE,
PRAGMA_OMP_THREADPRIVATE.
* tree.def (OMP_PARALLEL, OMP_FOR, OMP_SECTIONS,
OMP_SINGLE, OMP_SECTION, OMP_MASTER, OMP_ORDERED,
OMP_CRITICAL, OMP_ATOMIC, OMP_CLAUSE_PRIVATE,
OMP_CLAUSE_SHARED, OMP_CLAUSE_FIRSTPRIVATE,
OMP_CLAUSE_LASTPRIVATE, OMP_CLAUSE_REDUCTION,
OMP_CLAUSE_COPYIN, OMP_CLAUSE_COPYPRIVATE,
OMP_CLAUSE_IF, OMP_CLAUSE_NUM_THREADS,
OMP_CLAUSE_SCHEDULE, OMP_CLAUSE_NOWAIT,
OMP_CLAUSE_ORDERED, OMP_CLAUSE_DEFAULT): Define.
* print-tree.c (print_node): Dump DECL_VALUE_EXPR.
* tree-ssa-dce.c (find_control_dependence): Do not assume that
ENTRY_BLOCK_PTR->next_bb == single_succ (ENTRY_BLOCK_PTR).
* tree-nested.c (convert_call_expr): Call walk_body on OMP_BODY for
OpenMP directives.
(struct nesting_info): Add field_map,
suppress_expansion, debug_var_chain.
(create_nesting_tree): Initialize them.
(lookup_field_for_decl): Use field_map.
(get_nonlocal_debug_decl, get_local_debug_decl): New.
(convert_local_omp_clauses): New.
(finalize_nesting_tree_1): Add debug_var_chain to toplevel block.
(walk_body): Split out of walk_function.
(convert_nonlocal_omp_clauses, convert_local_omp_clauses): New.
(convert_nonlocal_reference): Handle omp statements.
(convert_local_reference): Likewise.
(unnest_nesting_tree_1): Split out of finalize_nesting_tree_1.
(unnest_nesting_tree): New.
(lower_nested_functions): Call it.
(insert_field_into_struct): Make extern.
(struct walk_stmt_info): Move to tree-gimple.h.
(walk_stmts): Make extern.
* omp-builtins.def: New file.
* tree-iterator.c (expr_only): Clarify comment.
* c-common.h (pushdecl_top_level, pushdecl,
build_modify_expr, build_indirect_ref,
c_finish_omp_master, c_finish_omp_critical,
c_finish_omp_ordered, c_finish_omp_barrier,
c_finish_omp_atomic, c_finish_omp_flush,
c_finish_omp_for, c_split_parallel_clauses,
omp_clause_default_kind, c_omp_sharing_predetermined,
c_omp_remap_decl): Declare.
* Makefile.in (BUILTINS_DEF): Add omp-builtins.def.
(OBJS-common): Add omp-low.o.
(c-omp.o, omp-low.o): Add.
(gimplify.o): Add dependency on $(OPTABS_H).
(GTFILES): Add omp-low.c.
(gt-stringpool.h): Add.
* tree-cfg.c (set_bb_for_stmt): Do not update the
block-to-labels map if we are currently expanding to RTL.
(tree_node_can_be_shared): Remove unnecessary CONSTANT_CLASS_P
checks.
Handle IDENTIFIER_NODE.
(tree_verify_flow_info): Do not ICE when emitting error
messages about invalid labels.
(dump_function_to_file): Reset CFUN before emitting the body
of the function.
(debug_function): New.
* passes.c (init_optimization_passes): Schedule
pass_lower_omp.
* langhooks-def.h (lhd_omp_predetermined_sharing,
lhd_omp_assignment, lhd_omp_firstprivatize_type_sizes):
Declare.
(LANG_HOOKS_OMP_FIRSTPRIVATIZE_TYPE_SIZES): Define.
(LANG_HOOKS_FOR_TYPES_INITIALIZER): Use it.
(LANG_HOOKS_OMP_PRIVATIZE_BY_REFERENCE,
LANG_HOOKS_OMP_PREDETERMINED_SHARING,
LANG_HOOKS_OMP_DISREGARD_VALUE_EXPR,
LANG_HOOKS_OMP_PRIVATE_DEBUG_CLAUSE,
LANG_HOOKS_OMP_CLAUSE_DEFAULT_CTOR,
LANG_HOOKS_OMP_CLAUSE_COPY_CTOR,
LANG_HOOKS_OMP_CLAUSE_ASSIGN_OP,
LANG_HOOKS_OMP_CLAUSE_DTOR): Define.
(LANG_HOOK_DECLS): Use them.
2006-01-18 Dmitry Kurochkin <dmitry.kurochkin@gmail.com>
Richard Henderson <rth@redhat.com>
Jakub Jelinek <jakub@redhat.com>
Diego Novillo <dnovillo@redhat.com>
* c-parser.c (pragma_omp_clause): Define.
(c_parser_declaration_or_fndef): Document OpenMP syntax.
(c_parser_compound_statement): Likewise.
(c_parser_statement): Likewise.
(c_parser_pragma): Handle omp pragmas.
(OMP_FOR_CLAUSE_MASK, OMP_SECTIONS_CLAUSE_MASK,
OMP_PARALLEL_CLAUSE_MASK, OMP_SINGLE_CLAUSE_MASK): Define.
(c_parser_omp_clause_name, check_no_duplicate_clause,
c_parser_omp_variable_list,
c_parser_omp_var_list_parens, c_parser_omp_clause_copyin,
c_parser_omp_clause_copyprivate,
c_parser_omp_clause_default,
c_parser_omp_clause_firstprivate, c_parser_omp_clause_if,
c_parser_omp_clause_lastprivate,
c_parser_omp_clause_nowait,
c_parser_omp_clause_num_threads,
c_parser_omp_clause_ordered, c_parser_omp_clause_private,
c_parser_omp_clause_reduction,
c_parser_omp_clause_schedule, c_parser_omp_clause_shared,
c_parser_omp_all_clauses, c_parser_omp_structured_block,
c_parser_omp_atomic, c_parser_omp_barrier,
c_parser_omp_critical, c_parser_omp_flush,
c_parser_omp_for_loop, c_parser_omp_for,
c_parser_omp_master, c_parser_omp_ordered,
c_parser_omp_sections_scope, c_parser_omp_sections,
c_parser_omp_parallel, c_parser_omp_single,
c_parser_omp_construct, c_parser_omp_threadprivate): New.
* c-pragma.c (init_pragma): Do omp pragma registration here.
* c.opt (fopenmp): New flag.
2006-01-18 Eric Christopher <echristo@apple.com>
* gcc.c (GOMP_SELF_SPECS): Bracket in #ifndef/#endif.
* config/darwin.h (GOMP_SELF_SPECS): Define.
testsuite/
2006-01-18 Richard Henderson <rth@redhat.com>
Aldy Hernandez <aldyh@redhat.com>
Jakub Jelinek <jakub@redhat.com>
Diego Novillo <dnovillo@redhat.com>
Uros Bizjak <uros@kss-loka.si>
* testsuite/gcc.dg/gomp: New directory.
From-SVN: r109902
2006-01-18 20:21:25 +01:00
;;
2015-08-10 17:53:33 +02:00
nvptx*-*-*)
;;
[multiple changes]
2006-01-18 Richard Henderson <rth@redhat.com>
Jakub Jelinek <jakub@redhat.com>
Diego Novillo <dnovillo@redhat.com>
* libgomp: New directory.
* Makefile.def: Add target_module libgomp.
* Makefile.in: Regenerate.
* configure.in (target_libraries): Add target-libgomp.
* configure: Regenerate.
contrib/
2006-01-18 Richard Henderson <rth@redhat.com>
Diego Novillo <dnovillo@redhat.com>
* gcc_update (files_and_dependencies): Add libgomp files.
gcc/
2006-01-18 Richard Henderson <rth@redhat.com>
Aldy Hernandez <aldyh@redhat.com>
Jakub Jelinek <jakub@redhat.com>
Diego Novillo <dnovillo@redhat.com>
* omp-low.c: New file.
* c-omp.c: New file.
2006-01-18 Richard Henderson <rth@redhat.com>
Jakub Jelinek <jakub@redhat.com>
Diego Novillo <dnovillo@redhat.com>
* doc/invoke.texi: Document -fopenmp.
* tree-dump.h (debug_function): Declare.
* hooks.c (hook_bool_tree_bool_false): New function.
(hook_tree_tree_null): Remove.
(hook_tree_tree_tree_null): New.
* hooks.h: Update to match.
* tree-pretty-print.c (debug_tree_chain): New.
(print_generic_expr): Handle TDF_CHAIN.
(dump_generic_node): Handle BLOCK.
Do not abort with incomplete SWITCH_EXPRs.
Do not dump body of an OpenMP directive if TDF_SLIM is given.
<case OMP_PARALLEL, OMP_FOR, OMP_SECTIONS>: Don't
print space after directive name.
<OMP_FOR>: Handle printing OMP_FOR_PRE_BODY.
Handle OMP_MASTER and OMP_ORDERED.
Handle printing of OMP_BODY just in one place, goto
dump_omp_body in the rest of OMP_* nodes that have
OMP_BODY.
Don't handle clause nodes here. Update omp statements to
use dump_omp_clauses.
Handle OMP_SINGLE, OMP_SECTIONS, OMP_SECTION,
OMP_CLAUSE_ORDERED, OMP_CLAUSE_SCHEDULE, OMP_ATOMIC,
OMP_CRITICAL, OMP_CLAUSE_NOWAIT, GOMP_CLAUSE_IF,
GOMP_CLAUSE_NUM_THREADS, GOMP_FOR, GOMP_CLAUSE_SHARED,
GOMP_CLAUSE_FIRSTPRIVATE, GOMP_CLAUSE_LASTPRIVATE,
GOMP_CLAUSE_COPYIN and GOMP_CLAUSE_COPYPRIVATE.
Adjust output for GOMP_PARALLEL.
(dump_omp_clauses): New.
(print_declaration): Dump DECL_VALUE_EXPR.
(op_symbol_1): Split out of op_symbol.
(dumping_stmts): Remove. Update all users.
* cgraph.c (cgraph_analyze_queue): New.
(cgraph_add_new_function): New.
* cgraph.h (cgraph_analyze_queue): Declare.
(cgraph_add_new_function): Declare.
(cgraph_lower_function): Remove.
* tree.c (walk_tree): Walk OMP_CLAUSE_CHAIN of OMP_CLAUSE_*
nodes. Use switch for all nodes, handle most of IS_EXPR_CODE_CLASS
and TYPE_P nodes in its default clause.
(empty_body_p): New.
(tree_range_check_failed): New.
(build5_stat): New.
* tree.h (OMP_CLAUSE_REDUCTION_INIT,
OMP_CLAUSE_REDUCTION_MERGE,
OMP_CLAUSE_REDUCTION_PLACEHOLDER,
OMP_CLAUSE_PRIVATE_DEBUG,
OMP_CLAUSE_LASTPRIVATE_FIRSTPRIVATE, OMP_FOR_PRE_BODY,
OMP_MASTER_BODY, OMP_ORDERED_BODY OMP_BODY,
OMP_CLAUSES, OMP_CLAUSE_DECL, OMP_CLAUSE_DEFAULT_KIND,
OMP_CLAUSE_CHAIN, OMP_CLAUSE_OUTER_DECL,
OMP_CLAUSE_INNER_DECL, OMP_CLAUSE_NUM_THREADS_EXPR,
OMP_CLAUSE_IF_EXPR, OMP_CLAUSE_SCHEDULE_CHUNK_EXPR,
OMP_CLAUSE_SCHEDULE_CHUNK_SIZE. OMP_PARALLEL_VAR_INIT,
OMP_PARALLEL_VAR_REDUC, OMP_FOR_VAR_INIT,
OMP_FOR_VAR_LAST, OMP_FOR_VAR_REDUC,
OMP_SECTIONS_VAR_INIT, OMP_SECTIONS_VAR_LAST,
OMP_SECTIONS_VAR_REDUC, OMP_CLAUSE_REDUCTION_CODE
OMP_SINGLE_CLAUSES, OMP_SINGLE_BODY,
OMP_CLAUSE_SCHEDULE_CHUNK_SIZE, OMP_SECTION_BODY,
OMP_CRITICAL_NAME, OMP_CRITICAL_BODY): New.
(TREE_RANGE_CHECK): New.
(empty_body_p): Declare.
(enum omp_clause_default_kind): New.
(build_string_literal): Declare.
(enum omp_clause_schedule_kind, OMP_CLAUSE_SCHEDULE_KIND): New.
(build5_stat, build5): Declare.
* tree-pass.h (TDF_CHAIN): Define.
* tree-pass.h (PROP_gimple_lomp): Define.
(pass_lower_omp): Declare.
* diagnostic.h (debug_tree_chain): Declare.
* builtins.c (get_builtin_sync_mode): Use 0 as last argument to
mode_for_size.
(expand_builtin): Handle sync BUILT_IN_*_16 builtins.
* builtins.c (build_string_literal): Make extern.
* gcc.c (include_spec_function): New.
(static_spec_functions): Add it.
(main): Move load of libgomp.spec ...
(LINK_COMMAND_SPEC): ... here.
(link_gomp_spec): New.
(static_specs): Include it.
(LINK_COMMAND_SPEC): Add link_gomp.
(GOMP_SELF_SPECS): New.
(driver_self_specs): Include it.
(switch_matches): Don't mark inline.
(main): Load libgomp.spec.
* tree-gimple.c (is_gimple_stmt): True for OMP_MASTER,
OMP_ORDERED, OMP_CRITICAL, OMP_SECTIONS, OMP_SECTION,
and OMP_SINGLE, OMP_FOR and OMP_PARALLEL.
* tree-gimple.h (enum omp_parallel): Declare.
(determine_parallel_type): Declare.
(omp_firstprivatize_variable): Declare.
(omp_reduction_init): Declare.
(diagnose_omp_structured_block_errors): Declare.
(struct walk_stmt_info): Add want_return_expr.
(struct walk_stmt_info): Add want_bind_expr, want_locations.
(find_omp_clause): Declare.
(insert_field_into_struct): Declare.
(struct walk_stmt_info): Move from tree-nested.c
(walk_stmts): Declare.
* c-cppbuiltin.c (c_cpp_builtins): If -fopenmp, #define _OPENMP
to 200505.
* cgraphunit.c (cgraph_lower_function): Make static.
(cgraph_finalize_pending_functions): New.
(cgraph_finalize_function): Call it.
(cgraph_finalize_compilation_unit): Likewise.
* builtin-types.def (BT_I16, BT_FN_I16_VPTR_I16,
BT_FN_BOOL_VPTR_I16_I16, BT_FN_I16_VPTR_I16_I16): Add.
(BT_FN_UINT_UINT): New.
(DEF_FUNCTION_TYPE_6, DEF_FUNCTION_TYPE_7,
DEF_FUNCTION_TYPE_VAR_4): Document.
(BT_PTR_LONG, BT_PTR_PTR, BT_FN_BOOL, BT_FN_INT,
BT_FN_VOID_PTRPTR, BT_PTR_FN_VOID_PTR,
BT_FN_BOOL_LONGPTR_LONGPTR, BT_FN_VOID_OMPFN_PTR_UINT,
BT_FN_VOID_OMPFN_PTR_UINT_UINT,
BT_FN_BOOL_LONG_LONG_LONG_LONGPTR_LONGPTR,
BT_FN_BOOL_LONG_LONG_LONG_LONG_LONGPTR_LONGPTR,
BT_FN_VOID_OMPFN_PTR_UINT_LONG_LONG_LONG,
BT_FN_VOID_OMPFN_PTR_UINT_LONG_LONG_LONG_LONG): New.
* builtins.def: Update DEF_BUILTIN comment to include COND argument.
Move all DEF_SYNC_BUILTIN () and DEF_GOMP_BUILTIN () builtins
into separate files.
(DEF_GOMP_BUILTIN): New.
(BUILT_IN_OMP_GET_THREAD_NUM, BUILT_IN_GOMP_BARRIER,
BUILT_IN_GOMP_CRITICAL_START, BUILT_IN_GOMP_CRITICAL_END,
BUILT_IN_GOMP_CRITICAL_NAME_START, BUILT_IN_GOMP_CRITICAL_NAME_END,
BUILT_IN_GOMP_LOOP_STATIC_START, BUILT_IN_GOMP_LOOP_DYNAMIC_START,
BUILT_IN_GOMP_LOOP_GUIDED_START, BUILT_IN_GOMP_LOOP_RUNTIME_START,
BUILT_IN_GOMP_LOOP_ORDERED_STATIC_START,
BUILT_IN_GOMP_LOOP_ORDERED_DYNAMIC_START,
BUILT_IN_GOMP_LOOP_ORDERED_GUIDED_START,
BUILT_IN_GOMP_LOOP_ORDERED_RUNTIME_START,
BUILT_IN_GOMP_LOOP_STATIC_NEXT, BUILT_IN_GOMP_LOOP_DYNAMIC_NEXT,
BUILT_IN_GOMP_LOOP_GUIDED_NEXT, BUILT_IN_GOMP_LOOP_RUNTIME_NEXT,
BUILT_IN_GOMP_LOOP_ORDERED_STATIC_NEXT,
BUILT_IN_GOMP_LOOP_ORDERED_DYNAMIC_NEXT,
BUILT_IN_GOMP_LOOP_ORDERED_GUIDED_NEXT,
BUILT_IN_GOMP_LOOP_ORDERED_RUNTIME_NEXT,
BUILT_IN_GOMP_PARALLEL_LOOP_STATIC_START,
BUILT_IN_GOMP_PARALLEL_LOOP_DYNAMIC_START,
BUILT_IN_GOMP_PARALLEL_LOOP_GUIDED_START,
BUILT_IN_GOMP_PARALLEL_LOOP_RUNTIME_START,
BUILT_IN_GOMP_LOOP_END, BUILT_IN_GOMP_LOOP_END_NOWAIT,
BUILT_IN_GOMP_ORDERED_START, BUILT_IN_GOMP_ORDERED_END,
BUILT_IN_GOMP_PARALLEL_START, BUILT_IN_GOMP_PARALLEL_END,
BUILT_IN_GOMP_SECTIONS_START, BUILT_IN_GOMP_SECTIONS_NEXT,
BUILT_IN_GOMP_PARALLEL_SECTIONS_START, BUILT_IN_GOMP_SECTIONS_END,
BUILT_IN_GOMP_SECTIONS_END_NOWAIT, BUILT_IN_GOMP_SINGLE_START,
BUILT_IN_GOMP_SINGLE_COPY_START, BUILT_IN_GOMP_SINGLE_COPY_END): New.
* sync-builtins.def: New file, moved from builtins.def.
* omp-builtins.def: New file, moved from builtins.def.
* c-objc-common.h (LANG_HOOKS_OMP_PREDETERMINED_SHARING): Redefine.
* gimple-low.c (lower_function_body): Clear data.
(lower_stmt): Do not handle COMPOUND_EXPR.
Remove call to print_node_brief.
* c-tree.h (c_finish_omp_clauses): New prototype.
(C_DECL_THREADPRIVATE_P): Define.
(lookup_name_no_remap, c_omp_remap_private): Remove
(c_begin_omp_parallel, c_finish_omp_parallel): Update.
(check_for_loop_decls): Update decl.
(lookup_name_no_remap, c_omp_remap_private): Declare.
(build_indirect_ref, build_modify_expr, pushdecl,
pushdecl_top_level): Move to c-common.h.
* dwarf2out.c (loc_descriptor_from_tree_1): Don't set unsignedp
before the switch, but just in the 2 places that need it.
* c-decl.c (diagnose_mismatched_decls): Do not check for
mismatched thread-local attributes when OLDDECL is marked
threadprivate and NEWDECL has no thread-local attributes.
(merge_decls): Merge C_DECL_THREADPRIVATE_P.
(c_gimple_diagnostics_recursively): Rename from
c_warn_unused_result_recursively. Invoke
diagnose_omp_structured_block_errors.
(check_for_loop_decls): Return a singular decl found.
* langhooks.c (lhd_omp_predetermined_sharing): Return
OMP_CLAUSE_DEFAULT_SHARED for DECL_ARTIFICIAL decls.
(lhd_omp_firstprivatize_type_sizes): New.
(lhd_omp_assignment): New.
(lhd_omp_predetermined_sharing): New.
* langhooks.h (struct gimplify_omp_ctx): Forward declare.
(struct lang_hooks_for_types): Add
omp_firstprivatize_type_sizes, omp_privatize_by_reference,
omp_predetermined_sharing, omp_disregard_value_expr,
omp_private_debug_clause, omp_clause_default_ctor,
omp_clause_copy_ctor, omp_clause_assign_op, omp_clause_dtor.
(c_finish_omp_clauses): New.
(c_finish_bc_stmt): Diagnose break within omp for.
(c_begin_omp_parallel, c_finish_omp_parallel): New.
(build_unary_op): Return error_mark after reporting
a readonly_error.
(build_modify_expr): Likewise.
* gimplify.c: Include optabs.h and pointer-set.h.
(enum gimplify_omp_var_data): Declare.
(struct gimplify_omp_ctx): Declare.
(struct gimplify_ctx): Add fields prev_context, combined_pre_p
and combined_ctxp.
(gimplify_ctxp, gimplify_omp_ctxp): New local variables.
(push_gimplify_context, pop_gimplify_context): Allow nesting.
(splay_tree_compare_decl_uid): New.
(new_omp_context): New.
(delete_omp_context): New.
(gimple_add_tmp_var): Call omp_add_variable.
(gimplify_bind_expr): Likewise.
(gimplify_var_or_parm_decl): If omp_notice_variable returned
true, disregard DECL_VALUE_EXPR on the decl if any.
(gimplify_expr_in_ctx): New.
(omp_firstprivatize_variable, omp_firstprivatize_type_sizes
omp_add_variable, omp_notice_variable, omp_is_private
gimplify_scan_omp_clauses, gimplify_adjust_omp_clauses_1
gimplify_adjust_omp_clauses, gimplify_omp_parallel
gimplify_omp_for, gimplify_omp_workshare, goa_lhs_expr_p
gimplify_omp_atomic_fetch_op, goa_stabilize_expr
gimplify_omp_atomic_pipeline, gimplify_omp_atomic_mutex
gimplify_omp_atomic): New.
(gimplify_expr): Handle OMP_PARALLEL, OMP_FOR, OMP_SECTIONS,
OMP_SINGLE, OMP_SECTION, OMP_MASTER, OMP_ORDERED,
OMP_CRITICAL and OMP_ATOMIC.
(gimplify_body): Verify gimplify_ctxp is empty after gimplification.
* c-pragma.h (enum pragma_kind): Add
PRAGMA_OMP_ATOMIC, PRAGMA_OMP_BARRIER,
PRAGMA_OMP_CRITICAL, PRAGMA_OMP_FLUSH, PRAGMA_OMP_FOR,
PRAGMA_OMP_MASTER, PRAGMA_OMP_ORDERED,
PRAGMA_OMP_PARALLEL, PRAGMA_OMP_PARALLEL_FOR,
PRAGMA_OMP_PARALLEL_SECTIONS, PRAGMA_OMP_SECTION,
PRAGMA_OMP_SECTIONS, PRAGMA_OMP_SINGLE,
PRAGMA_OMP_THREADPRIVATE.
* tree.def (OMP_PARALLEL, OMP_FOR, OMP_SECTIONS,
OMP_SINGLE, OMP_SECTION, OMP_MASTER, OMP_ORDERED,
OMP_CRITICAL, OMP_ATOMIC, OMP_CLAUSE_PRIVATE,
OMP_CLAUSE_SHARED, OMP_CLAUSE_FIRSTPRIVATE,
OMP_CLAUSE_LASTPRIVATE, OMP_CLAUSE_REDUCTION,
OMP_CLAUSE_COPYIN, OMP_CLAUSE_COPYPRIVATE,
OMP_CLAUSE_IF, OMP_CLAUSE_NUM_THREADS,
OMP_CLAUSE_SCHEDULE, OMP_CLAUSE_NOWAIT,
OMP_CLAUSE_ORDERED, OMP_CLAUSE_DEFAULT): Define.
* print-tree.c (print_node): Dump DECL_VALUE_EXPR.
* tree-ssa-dce.c (find_control_dependence): Do not assume that
ENTRY_BLOCK_PTR->next_bb == single_succ (ENTRY_BLOCK_PTR).
* tree-nested.c (convert_call_expr): Call walk_body on OMP_BODY for
OpenMP directives.
(struct nesting_info): Add field_map,
suppress_expansion, debug_var_chain.
(create_nesting_tree): Initialize them.
(lookup_field_for_decl): Use field_map.
(get_nonlocal_debug_decl, get_local_debug_decl): New.
(convert_local_omp_clauses): New.
(finalize_nesting_tree_1): Add debug_var_chain to toplevel block.
(walk_body): Split out of walk_function.
(convert_nonlocal_omp_clauses, convert_local_omp_clauses): New.
(convert_nonlocal_reference): Handle omp statements.
(convert_local_reference): Likewise.
(unnest_nesting_tree_1): Split out of finalize_nesting_tree_1.
(unnest_nesting_tree): New.
(lower_nested_functions): Call it.
(insert_field_into_struct): Make extern.
(struct walk_stmt_info): Move to tree-gimple.h.
(walk_stmts): Make extern.
* omp-builtins.def: New file.
* tree-iterator.c (expr_only): Clarify comment.
* c-common.h (pushdecl_top_level, pushdecl,
build_modify_expr, build_indirect_ref,
c_finish_omp_master, c_finish_omp_critical,
c_finish_omp_ordered, c_finish_omp_barrier,
c_finish_omp_atomic, c_finish_omp_flush,
c_finish_omp_for, c_split_parallel_clauses,
omp_clause_default_kind, c_omp_sharing_predetermined,
c_omp_remap_decl): Declare.
* Makefile.in (BUILTINS_DEF): Add omp-builtins.def.
(OBJS-common): Add omp-low.o.
(c-omp.o, omp-low.o): Add.
(gimplify.o): Add dependency on $(OPTABS_H).
(GTFILES): Add omp-low.c.
(gt-stringpool.h): Add.
* tree-cfg.c (set_bb_for_stmt): Do not update the
block-to-labels map if we are currently expanding to RTL.
(tree_node_can_be_shared): Remove unnecessary CONSTANT_CLASS_P
checks.
Handle IDENTIFIER_NODE.
(tree_verify_flow_info): Do not ICE when emitting error
messages about invalid labels.
(dump_function_to_file): Reset CFUN before emitting the body
of the function.
(debug_function): New.
* passes.c (init_optimization_passes): Schedule
pass_lower_omp.
* langhooks-def.h (lhd_omp_predetermined_sharing,
lhd_omp_assignment, lhd_omp_firstprivatize_type_sizes):
Declare.
(LANG_HOOKS_OMP_FIRSTPRIVATIZE_TYPE_SIZES): Define.
(LANG_HOOKS_FOR_TYPES_INITIALIZER): Use it.
(LANG_HOOKS_OMP_PRIVATIZE_BY_REFERENCE,
LANG_HOOKS_OMP_PREDETERMINED_SHARING,
LANG_HOOKS_OMP_DISREGARD_VALUE_EXPR,
LANG_HOOKS_OMP_PRIVATE_DEBUG_CLAUSE,
LANG_HOOKS_OMP_CLAUSE_DEFAULT_CTOR,
LANG_HOOKS_OMP_CLAUSE_COPY_CTOR,
LANG_HOOKS_OMP_CLAUSE_ASSIGN_OP,
LANG_HOOKS_OMP_CLAUSE_DTOR): Define.
(LANG_HOOK_DECLS): Use them.
2006-01-18 Dmitry Kurochkin <dmitry.kurochkin@gmail.com>
Richard Henderson <rth@redhat.com>
Jakub Jelinek <jakub@redhat.com>
Diego Novillo <dnovillo@redhat.com>
* c-parser.c (pragma_omp_clause): Define.
(c_parser_declaration_or_fndef): Document OpenMP syntax.
(c_parser_compound_statement): Likewise.
(c_parser_statement): Likewise.
(c_parser_pragma): Handle omp pragmas.
(OMP_FOR_CLAUSE_MASK, OMP_SECTIONS_CLAUSE_MASK,
OMP_PARALLEL_CLAUSE_MASK, OMP_SINGLE_CLAUSE_MASK): Define.
(c_parser_omp_clause_name, check_no_duplicate_clause,
c_parser_omp_variable_list,
c_parser_omp_var_list_parens, c_parser_omp_clause_copyin,
c_parser_omp_clause_copyprivate,
c_parser_omp_clause_default,
c_parser_omp_clause_firstprivate, c_parser_omp_clause_if,
c_parser_omp_clause_lastprivate,
c_parser_omp_clause_nowait,
c_parser_omp_clause_num_threads,
c_parser_omp_clause_ordered, c_parser_omp_clause_private,
c_parser_omp_clause_reduction,
c_parser_omp_clause_schedule, c_parser_omp_clause_shared,
c_parser_omp_all_clauses, c_parser_omp_structured_block,
c_parser_omp_atomic, c_parser_omp_barrier,
c_parser_omp_critical, c_parser_omp_flush,
c_parser_omp_for_loop, c_parser_omp_for,
c_parser_omp_master, c_parser_omp_ordered,
c_parser_omp_sections_scope, c_parser_omp_sections,
c_parser_omp_parallel, c_parser_omp_single,
c_parser_omp_construct, c_parser_omp_threadprivate): New.
* c-pragma.c (init_pragma): Do omp pragma registration here.
* c.opt (fopenmp): New flag.
2006-01-18 Eric Christopher <echristo@apple.com>
* gcc.c (GOMP_SELF_SPECS): Bracket in #ifndef/#endif.
* config/darwin.h (GOMP_SELF_SPECS): Define.
testsuite/
2006-01-18 Richard Henderson <rth@redhat.com>
Aldy Hernandez <aldyh@redhat.com>
Jakub Jelinek <jakub@redhat.com>
Diego Novillo <dnovillo@redhat.com>
Uros Bizjak <uros@kss-loka.si>
* testsuite/gcc.dg/gomp: New directory.
From-SVN: r109902
2006-01-18 20:21:25 +01:00
*)
noconfigdirs="$noconfigdirs target-libgomp"
;;
esac
2006-03-10 22:32:39 +01:00
fi
[multiple changes]
2006-01-18 Richard Henderson <rth@redhat.com>
Jakub Jelinek <jakub@redhat.com>
Diego Novillo <dnovillo@redhat.com>
* libgomp: New directory.
* Makefile.def: Add target_module libgomp.
* Makefile.in: Regenerate.
* configure.in (target_libraries): Add target-libgomp.
* configure: Regenerate.
contrib/
2006-01-18 Richard Henderson <rth@redhat.com>
Diego Novillo <dnovillo@redhat.com>
* gcc_update (files_and_dependencies): Add libgomp files.
gcc/
2006-01-18 Richard Henderson <rth@redhat.com>
Aldy Hernandez <aldyh@redhat.com>
Jakub Jelinek <jakub@redhat.com>
Diego Novillo <dnovillo@redhat.com>
* omp-low.c: New file.
* c-omp.c: New file.
2006-01-18 Richard Henderson <rth@redhat.com>
Jakub Jelinek <jakub@redhat.com>
Diego Novillo <dnovillo@redhat.com>
* doc/invoke.texi: Document -fopenmp.
* tree-dump.h (debug_function): Declare.
* hooks.c (hook_bool_tree_bool_false): New function.
(hook_tree_tree_null): Remove.
(hook_tree_tree_tree_null): New.
* hooks.h: Update to match.
* tree-pretty-print.c (debug_tree_chain): New.
(print_generic_expr): Handle TDF_CHAIN.
(dump_generic_node): Handle BLOCK.
Do not abort with incomplete SWITCH_EXPRs.
Do not dump body of an OpenMP directive if TDF_SLIM is given.
<case OMP_PARALLEL, OMP_FOR, OMP_SECTIONS>: Don't
print space after directive name.
<OMP_FOR>: Handle printing OMP_FOR_PRE_BODY.
Handle OMP_MASTER and OMP_ORDERED.
Handle printing of OMP_BODY just in one place, goto
dump_omp_body in the rest of OMP_* nodes that have
OMP_BODY.
Don't handle clause nodes here. Update omp statements to
use dump_omp_clauses.
Handle OMP_SINGLE, OMP_SECTIONS, OMP_SECTION,
OMP_CLAUSE_ORDERED, OMP_CLAUSE_SCHEDULE, OMP_ATOMIC,
OMP_CRITICAL, OMP_CLAUSE_NOWAIT, GOMP_CLAUSE_IF,
GOMP_CLAUSE_NUM_THREADS, GOMP_FOR, GOMP_CLAUSE_SHARED,
GOMP_CLAUSE_FIRSTPRIVATE, GOMP_CLAUSE_LASTPRIVATE,
GOMP_CLAUSE_COPYIN and GOMP_CLAUSE_COPYPRIVATE.
Adjust output for GOMP_PARALLEL.
(dump_omp_clauses): New.
(print_declaration): Dump DECL_VALUE_EXPR.
(op_symbol_1): Split out of op_symbol.
(dumping_stmts): Remove. Update all users.
* cgraph.c (cgraph_analyze_queue): New.
(cgraph_add_new_function): New.
* cgraph.h (cgraph_analyze_queue): Declare.
(cgraph_add_new_function): Declare.
(cgraph_lower_function): Remove.
* tree.c (walk_tree): Walk OMP_CLAUSE_CHAIN of OMP_CLAUSE_*
nodes. Use switch for all nodes, handle most of IS_EXPR_CODE_CLASS
and TYPE_P nodes in its default clause.
(empty_body_p): New.
(tree_range_check_failed): New.
(build5_stat): New.
* tree.h (OMP_CLAUSE_REDUCTION_INIT,
OMP_CLAUSE_REDUCTION_MERGE,
OMP_CLAUSE_REDUCTION_PLACEHOLDER,
OMP_CLAUSE_PRIVATE_DEBUG,
OMP_CLAUSE_LASTPRIVATE_FIRSTPRIVATE, OMP_FOR_PRE_BODY,
OMP_MASTER_BODY, OMP_ORDERED_BODY OMP_BODY,
OMP_CLAUSES, OMP_CLAUSE_DECL, OMP_CLAUSE_DEFAULT_KIND,
OMP_CLAUSE_CHAIN, OMP_CLAUSE_OUTER_DECL,
OMP_CLAUSE_INNER_DECL, OMP_CLAUSE_NUM_THREADS_EXPR,
OMP_CLAUSE_IF_EXPR, OMP_CLAUSE_SCHEDULE_CHUNK_EXPR,
OMP_CLAUSE_SCHEDULE_CHUNK_SIZE. OMP_PARALLEL_VAR_INIT,
OMP_PARALLEL_VAR_REDUC, OMP_FOR_VAR_INIT,
OMP_FOR_VAR_LAST, OMP_FOR_VAR_REDUC,
OMP_SECTIONS_VAR_INIT, OMP_SECTIONS_VAR_LAST,
OMP_SECTIONS_VAR_REDUC, OMP_CLAUSE_REDUCTION_CODE
OMP_SINGLE_CLAUSES, OMP_SINGLE_BODY,
OMP_CLAUSE_SCHEDULE_CHUNK_SIZE, OMP_SECTION_BODY,
OMP_CRITICAL_NAME, OMP_CRITICAL_BODY): New.
(TREE_RANGE_CHECK): New.
(empty_body_p): Declare.
(enum omp_clause_default_kind): New.
(build_string_literal): Declare.
(enum omp_clause_schedule_kind, OMP_CLAUSE_SCHEDULE_KIND): New.
(build5_stat, build5): Declare.
* tree-pass.h (TDF_CHAIN): Define.
* tree-pass.h (PROP_gimple_lomp): Define.
(pass_lower_omp): Declare.
* diagnostic.h (debug_tree_chain): Declare.
* builtins.c (get_builtin_sync_mode): Use 0 as last argument to
mode_for_size.
(expand_builtin): Handle sync BUILT_IN_*_16 builtins.
* builtins.c (build_string_literal): Make extern.
* gcc.c (include_spec_function): New.
(static_spec_functions): Add it.
(main): Move load of libgomp.spec ...
(LINK_COMMAND_SPEC): ... here.
(link_gomp_spec): New.
(static_specs): Include it.
(LINK_COMMAND_SPEC): Add link_gomp.
(GOMP_SELF_SPECS): New.
(driver_self_specs): Include it.
(switch_matches): Don't mark inline.
(main): Load libgomp.spec.
* tree-gimple.c (is_gimple_stmt): True for OMP_MASTER,
OMP_ORDERED, OMP_CRITICAL, OMP_SECTIONS, OMP_SECTION,
and OMP_SINGLE, OMP_FOR and OMP_PARALLEL.
* tree-gimple.h (enum omp_parallel): Declare.
(determine_parallel_type): Declare.
(omp_firstprivatize_variable): Declare.
(omp_reduction_init): Declare.
(diagnose_omp_structured_block_errors): Declare.
(struct walk_stmt_info): Add want_return_expr.
(struct walk_stmt_info): Add want_bind_expr, want_locations.
(find_omp_clause): Declare.
(insert_field_into_struct): Declare.
(struct walk_stmt_info): Move from tree-nested.c
(walk_stmts): Declare.
* c-cppbuiltin.c (c_cpp_builtins): If -fopenmp, #define _OPENMP
to 200505.
* cgraphunit.c (cgraph_lower_function): Make static.
(cgraph_finalize_pending_functions): New.
(cgraph_finalize_function): Call it.
(cgraph_finalize_compilation_unit): Likewise.
* builtin-types.def (BT_I16, BT_FN_I16_VPTR_I16,
BT_FN_BOOL_VPTR_I16_I16, BT_FN_I16_VPTR_I16_I16): Add.
(BT_FN_UINT_UINT): New.
(DEF_FUNCTION_TYPE_6, DEF_FUNCTION_TYPE_7,
DEF_FUNCTION_TYPE_VAR_4): Document.
(BT_PTR_LONG, BT_PTR_PTR, BT_FN_BOOL, BT_FN_INT,
BT_FN_VOID_PTRPTR, BT_PTR_FN_VOID_PTR,
BT_FN_BOOL_LONGPTR_LONGPTR, BT_FN_VOID_OMPFN_PTR_UINT,
BT_FN_VOID_OMPFN_PTR_UINT_UINT,
BT_FN_BOOL_LONG_LONG_LONG_LONGPTR_LONGPTR,
BT_FN_BOOL_LONG_LONG_LONG_LONG_LONGPTR_LONGPTR,
BT_FN_VOID_OMPFN_PTR_UINT_LONG_LONG_LONG,
BT_FN_VOID_OMPFN_PTR_UINT_LONG_LONG_LONG_LONG): New.
* builtins.def: Update DEF_BUILTIN comment to include COND argument.
Move all DEF_SYNC_BUILTIN () and DEF_GOMP_BUILTIN () builtins
into separate files.
(DEF_GOMP_BUILTIN): New.
(BUILT_IN_OMP_GET_THREAD_NUM, BUILT_IN_GOMP_BARRIER,
BUILT_IN_GOMP_CRITICAL_START, BUILT_IN_GOMP_CRITICAL_END,
BUILT_IN_GOMP_CRITICAL_NAME_START, BUILT_IN_GOMP_CRITICAL_NAME_END,
BUILT_IN_GOMP_LOOP_STATIC_START, BUILT_IN_GOMP_LOOP_DYNAMIC_START,
BUILT_IN_GOMP_LOOP_GUIDED_START, BUILT_IN_GOMP_LOOP_RUNTIME_START,
BUILT_IN_GOMP_LOOP_ORDERED_STATIC_START,
BUILT_IN_GOMP_LOOP_ORDERED_DYNAMIC_START,
BUILT_IN_GOMP_LOOP_ORDERED_GUIDED_START,
BUILT_IN_GOMP_LOOP_ORDERED_RUNTIME_START,
BUILT_IN_GOMP_LOOP_STATIC_NEXT, BUILT_IN_GOMP_LOOP_DYNAMIC_NEXT,
BUILT_IN_GOMP_LOOP_GUIDED_NEXT, BUILT_IN_GOMP_LOOP_RUNTIME_NEXT,
BUILT_IN_GOMP_LOOP_ORDERED_STATIC_NEXT,
BUILT_IN_GOMP_LOOP_ORDERED_DYNAMIC_NEXT,
BUILT_IN_GOMP_LOOP_ORDERED_GUIDED_NEXT,
BUILT_IN_GOMP_LOOP_ORDERED_RUNTIME_NEXT,
BUILT_IN_GOMP_PARALLEL_LOOP_STATIC_START,
BUILT_IN_GOMP_PARALLEL_LOOP_DYNAMIC_START,
BUILT_IN_GOMP_PARALLEL_LOOP_GUIDED_START,
BUILT_IN_GOMP_PARALLEL_LOOP_RUNTIME_START,
BUILT_IN_GOMP_LOOP_END, BUILT_IN_GOMP_LOOP_END_NOWAIT,
BUILT_IN_GOMP_ORDERED_START, BUILT_IN_GOMP_ORDERED_END,
BUILT_IN_GOMP_PARALLEL_START, BUILT_IN_GOMP_PARALLEL_END,
BUILT_IN_GOMP_SECTIONS_START, BUILT_IN_GOMP_SECTIONS_NEXT,
BUILT_IN_GOMP_PARALLEL_SECTIONS_START, BUILT_IN_GOMP_SECTIONS_END,
BUILT_IN_GOMP_SECTIONS_END_NOWAIT, BUILT_IN_GOMP_SINGLE_START,
BUILT_IN_GOMP_SINGLE_COPY_START, BUILT_IN_GOMP_SINGLE_COPY_END): New.
* sync-builtins.def: New file, moved from builtins.def.
* omp-builtins.def: New file, moved from builtins.def.
* c-objc-common.h (LANG_HOOKS_OMP_PREDETERMINED_SHARING): Redefine.
* gimple-low.c (lower_function_body): Clear data.
(lower_stmt): Do not handle COMPOUND_EXPR.
Remove call to print_node_brief.
* c-tree.h (c_finish_omp_clauses): New prototype.
(C_DECL_THREADPRIVATE_P): Define.
(lookup_name_no_remap, c_omp_remap_private): Remove
(c_begin_omp_parallel, c_finish_omp_parallel): Update.
(check_for_loop_decls): Update decl.
(lookup_name_no_remap, c_omp_remap_private): Declare.
(build_indirect_ref, build_modify_expr, pushdecl,
pushdecl_top_level): Move to c-common.h.
* dwarf2out.c (loc_descriptor_from_tree_1): Don't set unsignedp
before the switch, but just in the 2 places that need it.
* c-decl.c (diagnose_mismatched_decls): Do not check for
mismatched thread-local attributes when OLDDECL is marked
threadprivate and NEWDECL has no thread-local attributes.
(merge_decls): Merge C_DECL_THREADPRIVATE_P.
(c_gimple_diagnostics_recursively): Rename from
c_warn_unused_result_recursively. Invoke
diagnose_omp_structured_block_errors.
(check_for_loop_decls): Return a singular decl found.
* langhooks.c (lhd_omp_predetermined_sharing): Return
OMP_CLAUSE_DEFAULT_SHARED for DECL_ARTIFICIAL decls.
(lhd_omp_firstprivatize_type_sizes): New.
(lhd_omp_assignment): New.
(lhd_omp_predetermined_sharing): New.
* langhooks.h (struct gimplify_omp_ctx): Forward declare.
(struct lang_hooks_for_types): Add
omp_firstprivatize_type_sizes, omp_privatize_by_reference,
omp_predetermined_sharing, omp_disregard_value_expr,
omp_private_debug_clause, omp_clause_default_ctor,
omp_clause_copy_ctor, omp_clause_assign_op, omp_clause_dtor.
(c_finish_omp_clauses): New.
(c_finish_bc_stmt): Diagnose break within omp for.
(c_begin_omp_parallel, c_finish_omp_parallel): New.
(build_unary_op): Return error_mark after reporting
a readonly_error.
(build_modify_expr): Likewise.
* gimplify.c: Include optabs.h and pointer-set.h.
(enum gimplify_omp_var_data): Declare.
(struct gimplify_omp_ctx): Declare.
(struct gimplify_ctx): Add fields prev_context, combined_pre_p
and combined_ctxp.
(gimplify_ctxp, gimplify_omp_ctxp): New local variables.
(push_gimplify_context, pop_gimplify_context): Allow nesting.
(splay_tree_compare_decl_uid): New.
(new_omp_context): New.
(delete_omp_context): New.
(gimple_add_tmp_var): Call omp_add_variable.
(gimplify_bind_expr): Likewise.
(gimplify_var_or_parm_decl): If omp_notice_variable returned
true, disregard DECL_VALUE_EXPR on the decl if any.
(gimplify_expr_in_ctx): New.
(omp_firstprivatize_variable, omp_firstprivatize_type_sizes
omp_add_variable, omp_notice_variable, omp_is_private
gimplify_scan_omp_clauses, gimplify_adjust_omp_clauses_1
gimplify_adjust_omp_clauses, gimplify_omp_parallel
gimplify_omp_for, gimplify_omp_workshare, goa_lhs_expr_p
gimplify_omp_atomic_fetch_op, goa_stabilize_expr
gimplify_omp_atomic_pipeline, gimplify_omp_atomic_mutex
gimplify_omp_atomic): New.
(gimplify_expr): Handle OMP_PARALLEL, OMP_FOR, OMP_SECTIONS,
OMP_SINGLE, OMP_SECTION, OMP_MASTER, OMP_ORDERED,
OMP_CRITICAL and OMP_ATOMIC.
(gimplify_body): Verify gimplify_ctxp is empty after gimplification.
* c-pragma.h (enum pragma_kind): Add
PRAGMA_OMP_ATOMIC, PRAGMA_OMP_BARRIER,
PRAGMA_OMP_CRITICAL, PRAGMA_OMP_FLUSH, PRAGMA_OMP_FOR,
PRAGMA_OMP_MASTER, PRAGMA_OMP_ORDERED,
PRAGMA_OMP_PARALLEL, PRAGMA_OMP_PARALLEL_FOR,
PRAGMA_OMP_PARALLEL_SECTIONS, PRAGMA_OMP_SECTION,
PRAGMA_OMP_SECTIONS, PRAGMA_OMP_SINGLE,
PRAGMA_OMP_THREADPRIVATE.
* tree.def (OMP_PARALLEL, OMP_FOR, OMP_SECTIONS,
OMP_SINGLE, OMP_SECTION, OMP_MASTER, OMP_ORDERED,
OMP_CRITICAL, OMP_ATOMIC, OMP_CLAUSE_PRIVATE,
OMP_CLAUSE_SHARED, OMP_CLAUSE_FIRSTPRIVATE,
OMP_CLAUSE_LASTPRIVATE, OMP_CLAUSE_REDUCTION,
OMP_CLAUSE_COPYIN, OMP_CLAUSE_COPYPRIVATE,
OMP_CLAUSE_IF, OMP_CLAUSE_NUM_THREADS,
OMP_CLAUSE_SCHEDULE, OMP_CLAUSE_NOWAIT,
OMP_CLAUSE_ORDERED, OMP_CLAUSE_DEFAULT): Define.
* print-tree.c (print_node): Dump DECL_VALUE_EXPR.
* tree-ssa-dce.c (find_control_dependence): Do not assume that
ENTRY_BLOCK_PTR->next_bb == single_succ (ENTRY_BLOCK_PTR).
* tree-nested.c (convert_call_expr): Call walk_body on OMP_BODY for
OpenMP directives.
(struct nesting_info): Add field_map,
suppress_expansion, debug_var_chain.
(create_nesting_tree): Initialize them.
(lookup_field_for_decl): Use field_map.
(get_nonlocal_debug_decl, get_local_debug_decl): New.
(convert_local_omp_clauses): New.
(finalize_nesting_tree_1): Add debug_var_chain to toplevel block.
(walk_body): Split out of walk_function.
(convert_nonlocal_omp_clauses, convert_local_omp_clauses): New.
(convert_nonlocal_reference): Handle omp statements.
(convert_local_reference): Likewise.
(unnest_nesting_tree_1): Split out of finalize_nesting_tree_1.
(unnest_nesting_tree): New.
(lower_nested_functions): Call it.
(insert_field_into_struct): Make extern.
(struct walk_stmt_info): Move to tree-gimple.h.
(walk_stmts): Make extern.
* omp-builtins.def: New file.
* tree-iterator.c (expr_only): Clarify comment.
* c-common.h (pushdecl_top_level, pushdecl,
build_modify_expr, build_indirect_ref,
c_finish_omp_master, c_finish_omp_critical,
c_finish_omp_ordered, c_finish_omp_barrier,
c_finish_omp_atomic, c_finish_omp_flush,
c_finish_omp_for, c_split_parallel_clauses,
omp_clause_default_kind, c_omp_sharing_predetermined,
c_omp_remap_decl): Declare.
* Makefile.in (BUILTINS_DEF): Add omp-builtins.def.
(OBJS-common): Add omp-low.o.
(c-omp.o, omp-low.o): Add.
(gimplify.o): Add dependency on $(OPTABS_H).
(GTFILES): Add omp-low.c.
(gt-stringpool.h): Add.
* tree-cfg.c (set_bb_for_stmt): Do not update the
block-to-labels map if we are currently expanding to RTL.
(tree_node_can_be_shared): Remove unnecessary CONSTANT_CLASS_P
checks.
Handle IDENTIFIER_NODE.
(tree_verify_flow_info): Do not ICE when emitting error
messages about invalid labels.
(dump_function_to_file): Reset CFUN before emitting the body
of the function.
(debug_function): New.
* passes.c (init_optimization_passes): Schedule
pass_lower_omp.
* langhooks-def.h (lhd_omp_predetermined_sharing,
lhd_omp_assignment, lhd_omp_firstprivatize_type_sizes):
Declare.
(LANG_HOOKS_OMP_FIRSTPRIVATIZE_TYPE_SIZES): Define.
(LANG_HOOKS_FOR_TYPES_INITIALIZER): Use it.
(LANG_HOOKS_OMP_PRIVATIZE_BY_REFERENCE,
LANG_HOOKS_OMP_PREDETERMINED_SHARING,
LANG_HOOKS_OMP_DISREGARD_VALUE_EXPR,
LANG_HOOKS_OMP_PRIVATE_DEBUG_CLAUSE,
LANG_HOOKS_OMP_CLAUSE_DEFAULT_CTOR,
LANG_HOOKS_OMP_CLAUSE_COPY_CTOR,
LANG_HOOKS_OMP_CLAUSE_ASSIGN_OP,
LANG_HOOKS_OMP_CLAUSE_DTOR): Define.
(LANG_HOOK_DECLS): Use them.
2006-01-18 Dmitry Kurochkin <dmitry.kurochkin@gmail.com>
Richard Henderson <rth@redhat.com>
Jakub Jelinek <jakub@redhat.com>
Diego Novillo <dnovillo@redhat.com>
* c-parser.c (pragma_omp_clause): Define.
(c_parser_declaration_or_fndef): Document OpenMP syntax.
(c_parser_compound_statement): Likewise.
(c_parser_statement): Likewise.
(c_parser_pragma): Handle omp pragmas.
(OMP_FOR_CLAUSE_MASK, OMP_SECTIONS_CLAUSE_MASK,
OMP_PARALLEL_CLAUSE_MASK, OMP_SINGLE_CLAUSE_MASK): Define.
(c_parser_omp_clause_name, check_no_duplicate_clause,
c_parser_omp_variable_list,
c_parser_omp_var_list_parens, c_parser_omp_clause_copyin,
c_parser_omp_clause_copyprivate,
c_parser_omp_clause_default,
c_parser_omp_clause_firstprivate, c_parser_omp_clause_if,
c_parser_omp_clause_lastprivate,
c_parser_omp_clause_nowait,
c_parser_omp_clause_num_threads,
c_parser_omp_clause_ordered, c_parser_omp_clause_private,
c_parser_omp_clause_reduction,
c_parser_omp_clause_schedule, c_parser_omp_clause_shared,
c_parser_omp_all_clauses, c_parser_omp_structured_block,
c_parser_omp_atomic, c_parser_omp_barrier,
c_parser_omp_critical, c_parser_omp_flush,
c_parser_omp_for_loop, c_parser_omp_for,
c_parser_omp_master, c_parser_omp_ordered,
c_parser_omp_sections_scope, c_parser_omp_sections,
c_parser_omp_parallel, c_parser_omp_single,
c_parser_omp_construct, c_parser_omp_threadprivate): New.
* c-pragma.c (init_pragma): Do omp pragma registration here.
* c.opt (fopenmp): New flag.
2006-01-18 Eric Christopher <echristo@apple.com>
* gcc.c (GOMP_SELF_SPECS): Bracket in #ifndef/#endif.
* config/darwin.h (GOMP_SELF_SPECS): Define.
testsuite/
2006-01-18 Richard Henderson <rth@redhat.com>
Aldy Hernandez <aldyh@redhat.com>
Jakub Jelinek <jakub@redhat.com>
Diego Novillo <dnovillo@redhat.com>
Uros Bizjak <uros@kss-loka.si>
* testsuite/gcc.dg/gomp: New directory.
From-SVN: r109902
2006-01-18 20:21:25 +01:00
2012-05-01 17:48:28 +02:00
# Disable libatomic on unsupported systems.
if test -d ${srcdir}/libatomic; then
if test x$enable_libatomic = x; then
AC_MSG_CHECKING([for libatomic support])
if (srcdir=${srcdir}/libatomic; \
. ${srcdir}/configure.tgt; \
test -n "$UNSUPPORTED")
then
AC_MSG_RESULT([no])
noconfigdirs="$noconfigdirs target-libatomic"
else
AC_MSG_RESULT([yes])
fi
fi
fi
2013-10-29 19:37:47 +01:00
# Disable libcilkrts on unsupported systems.
if test -d ${srcdir}/libcilkrts; then
if test x$enable_libcilkrts = x; then
AC_MSG_CHECKING([for libcilkrts support])
if (srcdir=${srcdir}/libcilkrts; \
. ${srcdir}/configure.tgt; \
test -n "$UNSUPPORTED")
then
AC_MSG_RESULT([no])
noconfigdirs="$noconfigdirs target-libcilkrts"
else
AC_MSG_RESULT([yes])
fi
fi
fi
2014-11-13 15:03:17 +01:00
# Disable liboffloadmic on unsupported systems.
if test -d ${srcdir}/liboffloadmic; then
if test x$enable_liboffloadmic != xno; then
AC_MSG_CHECKING([for liboffloadmic support])
if (srcdir=${srcdir}/liboffloadmic; \
. ${srcdir}/configure.tgt; \
test -n "$UNSUPPORTED")
then
AC_MSG_RESULT([no])
noconfigdirs="$noconfigdirs target-liboffloadmic"
else
AC_MSG_RESULT([yes])
fi
fi
fi
2011-11-08 22:18:26 +01:00
# Disable libitm on unsupported systems.
if test -d ${srcdir}/libitm; then
if test x$enable_libitm = x; then
AC_MSG_CHECKING([for libitm support])
if (srcdir=${srcdir}/libitm; \
. ${srcdir}/configure.tgt; \
test -n "$UNSUPPORTED")
then
AC_MSG_RESULT([no])
noconfigdirs="$noconfigdirs target-libitm"
else
AC_MSG_RESULT([yes])
fi
fi
2011-11-08 12:13:41 +01:00
fi
2012-11-13 23:19:44 +01:00
# Disable libsanitizer on unsupported systems.
if test -d ${srcdir}/libsanitizer; then
if test x$enable_libsanitizer = x; then
AC_MSG_CHECKING([for libsanitizer support])
if (srcdir=${srcdir}/libsanitizer; \
. ${srcdir}/configure.tgt; \
test -n "$UNSUPPORTED")
then
AC_MSG_RESULT([no])
noconfigdirs="$noconfigdirs target-libsanitizer"
else
AC_MSG_RESULT([yes])
fi
fi
fi
Commit the vtable verification feature.
Commit the vtable verification feature. This feature is designed to
detect, at run time, if/when the vtable pointer in a C++ object has
been corrupted, before allowing virtual calls through that pointer.
If pointer corruption is detected, execution of the program is halted.
libstdc++-v3 ChangeLog:
2013-08-06 Caroline Tice <cmtice@google.com>
* fragment.am: Add XTEMPLATE_FLAGS.
* configure.ac: Add definitions for --enable-vtable-verify.
* acinclude.m4: Add --enable-vtable-verify and
--disable-vtable-verify; define --enable-vtable-verify; define
VTV_CXXFLAGS, VTV_PCH_CXXFLAGS and VTV_CXXLINKFLAGS.
* config/abi/pre/gnu.ver: Export symbols for vtable verification.
* libsupc++/Makefile.am: Define vtv_sources and add it to
libsupc___la_SOURCES and libsupc__convenience_la_SOURCES.
* libsupc++/vtv_stubs.cc: New file.
* include/Makefile.am: Add VTV_PCH_CXXFLAGS to PCHFLAGS.
* src/Makefile.am: Add VTV_CXXFLAGS to AM_CXXFLAGS; add
VTV_CXXLINKFLAGS to CXXLINK.
* src/c++98/Makefile.am: Comment out XTEMPLATE_FLAGS; add VTV_CXXFLAGS
to AM_CXXFLAGS; add VTV_CXXXLINKFLAGS to CXXLINK.
* src/C++11/Makefile.am: Ditto.
* doc/xml/manual/configure.xml: Add entry for --enable-vtable-verify.
* scripts/testsuite_flags.in: Add cxxvtvflags to Usage; cause
cxxvtvflags to use VTV_CXXFLAGS and VTV_CXXLINKFLAGS.
* testsuite/lib/libstdc++.exp: Add cxxvtvflags; add code to locate
libvtv if --enable-vtable-verify was used; set cxxvtvflags; add
cxxvtvflags to cxx_final.
* testsuite/18_support/bad_exception/23591_thread-1.c: Add
-fvtable-verify=none to compiler flags.
* testsuite/17_intro/freestanding.cc: Add -fvtable-verify=none
to compiler flags.
* configure: Regenerated.
* Makefile.in: Regenerated.
* python/Makefile.in: Regenerated.
* include/Makefile.in: Regenerated.
* libsupc++/Makefile.in: Regenerated.
* config.h.in: Regenerated.
* po/Makefile.in: Regenerated.
* src/Makefile.in: Regenerated.
* src/c++98/Makefile.in: Regenerated.
* src/c++11/Makefile.in: Regenerated.
* doc/Makefile.in: Regenerated.
* testsuite/Makefile.in: Regenerated.
top level ChangeLog:
2013-08-06 Caroline Tice <cmtice@google.com>
* configure.ac: Add target-libvtv to target_libraries; disable libvtv
on non-linux systems; add target-libvtv to noconfigdirs; add
libsupc++/.libs to C++ library search paths.
* configure: Regenerated.
* Makefile.def: Add libvtv to target_modules; make libvtv depend on
libstdc++ and libgcc.
* Makefile.in: Regenerated.
include/ChangeLog:
2013-08-06 Caroline Tice <cmtice@google.com>
* vtv-change-permission.h: New file.
contrib/ChangeLog:
2013-08-06 Caroline Tice4 <cmtice@google.com>
* gcc_update: Add libvtv files.
libgcc/ChangeLog:
2013-08-06 Caroline Tice <cmtice@google.com>
config.host (extra_parts): Add vtv_start.o, vtv_end.o
vtv_start_preinit.o and vtv_end_preinit.o.
configure.ac: Add code to check/set enable_vtable_verify.
Makefile.in: Add rules to build vtv_*.o, if enable_vtable_verify is
true.
vtv_start_preinit.c: New file.
vtv_end_preinit.c: New file.
vtv_start.c: New file.
vtv_end.c: New file.
configure: Regenerated.
gcc/ChangeLog:
2013-08-06 Caroline Tice <cmtice@google.com>
* gcc.c (VTABLE_VERIFICATION_SPEC): New definition.
(LINK_COMMAND_SPEC): Add VTABLE_VERIFICATION_SPEC.
* tree-pass.h: Add pass_vtable_verify.
* varasm.c (assemble_variable): Add code to properly set the comdat
section and name for the .vtable_map_vars section.
(assemble_vtyv_preinit_initializer): New function.
(default_sectin_type_flags): Make sure .vtable_map_vars section has
LINK_ONCE flag.
* output.h: Add function decl for assemble_vtv_preinit_initializer.
* vtable-verify.c: New file.
* vtable-verify.h: New file.
* flag-types.h (enum vtv_priority): Defintions for flag_vtable_verify
initialiation levels.
* timevar.def (TV_VTABLE_VERIFICATION): New definition.
* passes.def: Insert pass_vtable_verify.
* aclocal.m4: Reorder includes.
* doc/invoke.texi: Add documentation for the flags -fvtable-verify=,
-fvtv-debug and -fvtv-counts.
* config/gnu-user.h (GNU_USER_TARGET_STARTFILE_SPEC): Add vtv_start*.o,
as appropriate, if -fvtable-verify=... is used.
(GNU_USER_TARGET_ENDFILE_SPEC): Add vtv_end*.o as appropriate, if
-fvtable-verify=... is used.
* Makefile.in (OBJS): Add vtable-verify.o to list.
(vtable-verify.o): Add new build rule.
(GTFILES): Add vtable-verify.c to list.
* common.opt (fvtable-verify=): New flag.
(vtv_priority): Values for fvtable-verify= flag.
(fvtv-counts): New flag.
(fvtv-debug): New flag.
* tree.h (save_vtable_map_decl): New extern function decl.
gcc/cp/ChangeLog:
2013-08-06 Caroline Tice <cmtice@google.com>
* Make-lang.in (*CXX_AND_OBJCXX_OBJS): Add vtable-class-hierarchy.o to
list.
(vtable-class-hierarchy.o): Add build rule.
* cp-tree.h (vtv_start_verification_constructor_init_function): New
extern function decl.
(vtv_finish_verification_constructor_init_function): New extern
function decl.
(build_vtbl_address): New extern function decl.
(get_mangled_vtable_map_var_name): New extern function decl.
(vtv_compute_class_hierarchy_transitive_closure): New extern function
decl.
(vtv_generate_init_routine): New extern function decl.
(vtv_save_class_info): New extern function decl.
(vtv_recover_class_info): New extern function decl.
(vtv_build_vtable_verify_fndecl): New extern function decl.
* class.c (finish_struct_1): Add call to vtv_save_class_info if
flag_vtable_verify is true.
* config-lang.in: Add vtable-class-hierarchy.c to gtfiles list.
* vtable-class-hierarchy.c: New file.
* mangle.c (get_mangled_vtable_map_var_name): New function.
* decl2.c (start_objects): Update function comment.
(cp_write_global_declarations): Call vtv_recover_class_info,
vtv_compute_class_hierarchy_transitive_closure and
vtv_build_vtable_verify_fndecl, before calling
finalize_compilation_unit, and call vtv_generate_init_rount after, IFF
flag_vtable_verify is true.
(vtv_start_verification_constructor_init_function): New function.
(vtv_finish_verification_constructor_init_function): New function.
* init.c (build_vtbl_address): Remove static qualifier from function.
libvtv/ChangeLog:
2013-08-06 Caroline Tice <cmtice@google.com>
Initial check-in of new vtable verification feature.
* configure.ac : New file.
* acinclude.m4 : New file.
* Makefile.am : New file.
* aclocal.m4 : New file.
* configure.tgt : New file.
* configure: New file (generated).
* Makefile.in: New file (generated).
* vtv_set.h : New file.
* vtv_utils.cc : New file.
* vtv_utils.h : New file.
* vtv_malloc.cc : New file.
* vtv_rts.cc : New file.
* vtv_malloc.h : New file.
* vtv_rts.h : New file.
* vtv_fail.cc : New file.
* vtv_fail.h : New file.
* vtv_map.h : New file.
* scripts/run-testsuite.sh : New file.
* scripts/sum-vtv-counts.c : New file.
* testsuite/parts-test-main.h : New file.
* testusite/dataentry.cc : New file.
* testsuite/temp_deriv.cc : New file.
* testsuite/register_pair.cc : New file.
* testsuite/virtual_inheritance.cc : New file.
* testsuite/field-test.cc : New file.
* testsuite/nested_vcall_test.cc : New file.
* testsuite/template-list-iostream.cc : New file.
* testsuite/register_pair_inserts.cc : New file.
* testsuite/register_pair_inserts_mt.cc : New file.
* testsuite/event.list : New file.
* testsuite/parts-test-extra-parts-views.cc : New file.
* testsuite/parts-test-extra-parts-views.h : New file.
* testsuite/environment-fail-32.s : New file.
* testsuite/parts-test-extra-parts.h : New file.
* testsuite/temp_deriv2.cc : New file.
* testsuite/dlopen_mt.cc : New file.
* testsuite/event.h : New file.
* testsuite/template-list.cc : New file.
* testsuite/replace-fail.cc : New file.
* testsuite/Makefile.am : New file.
* testsuite/Makefile.in: New file (generated).
* testsuite/mempool_negative.c : New file.
* testsuite/parts-test-main.cc : New file.
* testsuite/event-private.cc : New file.
* testsuite/thunk.cc : New file.
* testsuite/event-defintiions.cc : New file.
* testsuite/event-private.h : New file.
* testsuite/parts-test.list : New file.
* testusite/register_pair_mt.cc : New file.
* testsuite/povray-derived.cc : New file.
* testsuite/event-main.cc : New file.
* testsuite/environment.cc : New file.
* testsuite/template-list2.cc : New file.
* testsuite/thunk_vtable_map_attack.cc : New file.
* testsuite/parts-test-extra-parts.cc : New file.
* testsuite/environment-fail-64.s : New file.
* testsuite/dlopen.cc : New file.
* testsuite/so.cc : New file.
* testsuite/temp_deriv3.cc : New file.
* testsuite/const_vtable.cc : New file.
* testsuite/mempool_positive.c : New file.
* testsuite/dup_name.cc : New file.
From-SVN: r201555
2013-08-07 05:38:59 +02:00
# Disable libvtv on unsupported systems.
if test -d ${srcdir}/libvtv; then
if test x$enable_libvtv = x; then
AC_MSG_CHECKING([for libvtv support])
if (srcdir=${srcdir}/libvtv; \
. ${srcdir}/configure.tgt; \
2013-08-09 05:50:55 +02:00
test "$VTV_SUPPORTED" != "yes")
Commit the vtable verification feature.
Commit the vtable verification feature. This feature is designed to
detect, at run time, if/when the vtable pointer in a C++ object has
been corrupted, before allowing virtual calls through that pointer.
If pointer corruption is detected, execution of the program is halted.
libstdc++-v3 ChangeLog:
2013-08-06 Caroline Tice <cmtice@google.com>
* fragment.am: Add XTEMPLATE_FLAGS.
* configure.ac: Add definitions for --enable-vtable-verify.
* acinclude.m4: Add --enable-vtable-verify and
--disable-vtable-verify; define --enable-vtable-verify; define
VTV_CXXFLAGS, VTV_PCH_CXXFLAGS and VTV_CXXLINKFLAGS.
* config/abi/pre/gnu.ver: Export symbols for vtable verification.
* libsupc++/Makefile.am: Define vtv_sources and add it to
libsupc___la_SOURCES and libsupc__convenience_la_SOURCES.
* libsupc++/vtv_stubs.cc: New file.
* include/Makefile.am: Add VTV_PCH_CXXFLAGS to PCHFLAGS.
* src/Makefile.am: Add VTV_CXXFLAGS to AM_CXXFLAGS; add
VTV_CXXLINKFLAGS to CXXLINK.
* src/c++98/Makefile.am: Comment out XTEMPLATE_FLAGS; add VTV_CXXFLAGS
to AM_CXXFLAGS; add VTV_CXXXLINKFLAGS to CXXLINK.
* src/C++11/Makefile.am: Ditto.
* doc/xml/manual/configure.xml: Add entry for --enable-vtable-verify.
* scripts/testsuite_flags.in: Add cxxvtvflags to Usage; cause
cxxvtvflags to use VTV_CXXFLAGS and VTV_CXXLINKFLAGS.
* testsuite/lib/libstdc++.exp: Add cxxvtvflags; add code to locate
libvtv if --enable-vtable-verify was used; set cxxvtvflags; add
cxxvtvflags to cxx_final.
* testsuite/18_support/bad_exception/23591_thread-1.c: Add
-fvtable-verify=none to compiler flags.
* testsuite/17_intro/freestanding.cc: Add -fvtable-verify=none
to compiler flags.
* configure: Regenerated.
* Makefile.in: Regenerated.
* python/Makefile.in: Regenerated.
* include/Makefile.in: Regenerated.
* libsupc++/Makefile.in: Regenerated.
* config.h.in: Regenerated.
* po/Makefile.in: Regenerated.
* src/Makefile.in: Regenerated.
* src/c++98/Makefile.in: Regenerated.
* src/c++11/Makefile.in: Regenerated.
* doc/Makefile.in: Regenerated.
* testsuite/Makefile.in: Regenerated.
top level ChangeLog:
2013-08-06 Caroline Tice <cmtice@google.com>
* configure.ac: Add target-libvtv to target_libraries; disable libvtv
on non-linux systems; add target-libvtv to noconfigdirs; add
libsupc++/.libs to C++ library search paths.
* configure: Regenerated.
* Makefile.def: Add libvtv to target_modules; make libvtv depend on
libstdc++ and libgcc.
* Makefile.in: Regenerated.
include/ChangeLog:
2013-08-06 Caroline Tice <cmtice@google.com>
* vtv-change-permission.h: New file.
contrib/ChangeLog:
2013-08-06 Caroline Tice4 <cmtice@google.com>
* gcc_update: Add libvtv files.
libgcc/ChangeLog:
2013-08-06 Caroline Tice <cmtice@google.com>
config.host (extra_parts): Add vtv_start.o, vtv_end.o
vtv_start_preinit.o and vtv_end_preinit.o.
configure.ac: Add code to check/set enable_vtable_verify.
Makefile.in: Add rules to build vtv_*.o, if enable_vtable_verify is
true.
vtv_start_preinit.c: New file.
vtv_end_preinit.c: New file.
vtv_start.c: New file.
vtv_end.c: New file.
configure: Regenerated.
gcc/ChangeLog:
2013-08-06 Caroline Tice <cmtice@google.com>
* gcc.c (VTABLE_VERIFICATION_SPEC): New definition.
(LINK_COMMAND_SPEC): Add VTABLE_VERIFICATION_SPEC.
* tree-pass.h: Add pass_vtable_verify.
* varasm.c (assemble_variable): Add code to properly set the comdat
section and name for the .vtable_map_vars section.
(assemble_vtyv_preinit_initializer): New function.
(default_sectin_type_flags): Make sure .vtable_map_vars section has
LINK_ONCE flag.
* output.h: Add function decl for assemble_vtv_preinit_initializer.
* vtable-verify.c: New file.
* vtable-verify.h: New file.
* flag-types.h (enum vtv_priority): Defintions for flag_vtable_verify
initialiation levels.
* timevar.def (TV_VTABLE_VERIFICATION): New definition.
* passes.def: Insert pass_vtable_verify.
* aclocal.m4: Reorder includes.
* doc/invoke.texi: Add documentation for the flags -fvtable-verify=,
-fvtv-debug and -fvtv-counts.
* config/gnu-user.h (GNU_USER_TARGET_STARTFILE_SPEC): Add vtv_start*.o,
as appropriate, if -fvtable-verify=... is used.
(GNU_USER_TARGET_ENDFILE_SPEC): Add vtv_end*.o as appropriate, if
-fvtable-verify=... is used.
* Makefile.in (OBJS): Add vtable-verify.o to list.
(vtable-verify.o): Add new build rule.
(GTFILES): Add vtable-verify.c to list.
* common.opt (fvtable-verify=): New flag.
(vtv_priority): Values for fvtable-verify= flag.
(fvtv-counts): New flag.
(fvtv-debug): New flag.
* tree.h (save_vtable_map_decl): New extern function decl.
gcc/cp/ChangeLog:
2013-08-06 Caroline Tice <cmtice@google.com>
* Make-lang.in (*CXX_AND_OBJCXX_OBJS): Add vtable-class-hierarchy.o to
list.
(vtable-class-hierarchy.o): Add build rule.
* cp-tree.h (vtv_start_verification_constructor_init_function): New
extern function decl.
(vtv_finish_verification_constructor_init_function): New extern
function decl.
(build_vtbl_address): New extern function decl.
(get_mangled_vtable_map_var_name): New extern function decl.
(vtv_compute_class_hierarchy_transitive_closure): New extern function
decl.
(vtv_generate_init_routine): New extern function decl.
(vtv_save_class_info): New extern function decl.
(vtv_recover_class_info): New extern function decl.
(vtv_build_vtable_verify_fndecl): New extern function decl.
* class.c (finish_struct_1): Add call to vtv_save_class_info if
flag_vtable_verify is true.
* config-lang.in: Add vtable-class-hierarchy.c to gtfiles list.
* vtable-class-hierarchy.c: New file.
* mangle.c (get_mangled_vtable_map_var_name): New function.
* decl2.c (start_objects): Update function comment.
(cp_write_global_declarations): Call vtv_recover_class_info,
vtv_compute_class_hierarchy_transitive_closure and
vtv_build_vtable_verify_fndecl, before calling
finalize_compilation_unit, and call vtv_generate_init_rount after, IFF
flag_vtable_verify is true.
(vtv_start_verification_constructor_init_function): New function.
(vtv_finish_verification_constructor_init_function): New function.
* init.c (build_vtbl_address): Remove static qualifier from function.
libvtv/ChangeLog:
2013-08-06 Caroline Tice <cmtice@google.com>
Initial check-in of new vtable verification feature.
* configure.ac : New file.
* acinclude.m4 : New file.
* Makefile.am : New file.
* aclocal.m4 : New file.
* configure.tgt : New file.
* configure: New file (generated).
* Makefile.in: New file (generated).
* vtv_set.h : New file.
* vtv_utils.cc : New file.
* vtv_utils.h : New file.
* vtv_malloc.cc : New file.
* vtv_rts.cc : New file.
* vtv_malloc.h : New file.
* vtv_rts.h : New file.
* vtv_fail.cc : New file.
* vtv_fail.h : New file.
* vtv_map.h : New file.
* scripts/run-testsuite.sh : New file.
* scripts/sum-vtv-counts.c : New file.
* testsuite/parts-test-main.h : New file.
* testusite/dataentry.cc : New file.
* testsuite/temp_deriv.cc : New file.
* testsuite/register_pair.cc : New file.
* testsuite/virtual_inheritance.cc : New file.
* testsuite/field-test.cc : New file.
* testsuite/nested_vcall_test.cc : New file.
* testsuite/template-list-iostream.cc : New file.
* testsuite/register_pair_inserts.cc : New file.
* testsuite/register_pair_inserts_mt.cc : New file.
* testsuite/event.list : New file.
* testsuite/parts-test-extra-parts-views.cc : New file.
* testsuite/parts-test-extra-parts-views.h : New file.
* testsuite/environment-fail-32.s : New file.
* testsuite/parts-test-extra-parts.h : New file.
* testsuite/temp_deriv2.cc : New file.
* testsuite/dlopen_mt.cc : New file.
* testsuite/event.h : New file.
* testsuite/template-list.cc : New file.
* testsuite/replace-fail.cc : New file.
* testsuite/Makefile.am : New file.
* testsuite/Makefile.in: New file (generated).
* testsuite/mempool_negative.c : New file.
* testsuite/parts-test-main.cc : New file.
* testsuite/event-private.cc : New file.
* testsuite/thunk.cc : New file.
* testsuite/event-defintiions.cc : New file.
* testsuite/event-private.h : New file.
* testsuite/parts-test.list : New file.
* testusite/register_pair_mt.cc : New file.
* testsuite/povray-derived.cc : New file.
* testsuite/event-main.cc : New file.
* testsuite/environment.cc : New file.
* testsuite/template-list2.cc : New file.
* testsuite/thunk_vtable_map_attack.cc : New file.
* testsuite/parts-test-extra-parts.cc : New file.
* testsuite/environment-fail-64.s : New file.
* testsuite/dlopen.cc : New file.
* testsuite/so.cc : New file.
* testsuite/temp_deriv3.cc : New file.
* testsuite/const_vtable.cc : New file.
* testsuite/mempool_positive.c : New file.
* testsuite/dup_name.cc : New file.
From-SVN: r201555
2013-08-07 05:38:59 +02:00
then
AC_MSG_RESULT([no])
noconfigdirs="$noconfigdirs target-libvtv"
else
AC_MSG_RESULT([yes])
fi
fi
fi
2015-03-10 10:37:41 +01:00
# Enable libmpx on supported systems by request.
if test -d ${srcdir}/libmpx; then
2015-11-13 07:48:20 +01:00
if test x$enable_libmpx = x; then
2015-03-10 10:37:41 +01:00
AC_MSG_CHECKING([for libmpx support])
if (srcdir=${srcdir}/libmpx; \
. ${srcdir}/configure.tgt; \
test "$LIBMPX_SUPPORTED" != "yes")
then
AC_MSG_RESULT([no])
noconfigdirs="$noconfigdirs target-libmpx"
else
AC_MSG_RESULT([yes])
fi
fi
fi
2012-09-15 01:23:41 +02:00
# Disable libquadmath for some systems.
case "${target}" in
2012-11-13 15:19:14 +01:00
avr-*-*)
noconfigdirs="$noconfigdirs target-libquadmath"
;;
2012-09-15 01:23:41 +02:00
# libquadmath is unused on AIX and libquadmath build process use of
# LD_LIBRARY_PATH can break AIX bootstrap.
powerpc-*-aix* | rs6000-*-aix*)
noconfigdirs="$noconfigdirs target-libquadmath"
;;
esac
2011-04-01 13:59:22 +02:00
# Disable libssp for some systems.
case "${target}" in
avr-*-*)
2011-04-01 21:14:48 +02:00
# No hosted I/O support.
2011-04-01 13:59:22 +02:00
noconfigdirs="$noconfigdirs target-libssp"
;;
powerpc-*-aix* | rs6000-*-aix*)
noconfigdirs="$noconfigdirs target-libssp"
;;
2011-11-29 22:36:43 +01:00
rl78-*-*)
# libssp uses a misaligned load to trigger a fault, but the RL78
# doesn't fault for those - instead, it gives a build-time error
# for explicit misaligned loads.
noconfigdirs="$noconfigdirs target-libssp"
;;
2015-01-06 09:50:12 +01:00
visium-*-*)
# No hosted I/O support.
noconfigdirs="$noconfigdirs target-libssp"
;;
2011-04-01 13:59:22 +02:00
esac
# Disable libstdc++-v3 for some systems.
2012-11-03 16:53:28 +01:00
# Allow user to override this if they pass --enable-libstdc++-v3
if test "${ENABLE_LIBSTDCXX}" = "default" ; then
case "${target}" in
*-*-vxworks*)
# VxWorks uses the Dinkumware C++ library.
noconfigdirs="$noconfigdirs target-libstdc++-v3"
;;
arm*-wince-pe*)
# the C++ libraries don't build on top of CE's C libraries
noconfigdirs="$noconfigdirs target-libstdc++-v3"
;;
avr-*-*)
noconfigdirs="$noconfigdirs target-libstdc++-v3"
;;
2015-05-17 01:49:08 +02:00
ft32-*-*)
noconfigdirs="$noconfigdirs target-libstdc++-v3"
;;
2012-11-03 16:53:28 +01:00
esac
fi
2011-04-01 13:59:22 +02:00
# Disable Fortran for some systems.
case "${target}" in
mmix-*-*)
# See <http://gcc.gnu.org/ml/gcc-patches/2004-11/msg00572.html>.
unsupported_languages="$unsupported_languages fortran"
;;
esac
2016-10-01 00:46:39 +02:00
# Disable libffi for some systems.
case "${target}" in
powerpc-*-darwin*)
;;
i[[3456789]]86-*-darwin*)
;;
x86_64-*-darwin[[912]]*)
;;
*-*-darwin*)
noconfigdirs="$noconfigdirs target-libffi"
;;
*-*-netware*)
noconfigdirs="$noconfigdirs target-libffi"
;;
*-*-phoenix*)
noconfigdirs="$noconfigdirs target-libffi"
;;
*-*-rtems*)
noconfigdirs="$noconfigdirs target-libffi"
;;
*-*-tpf*)
noconfigdirs="$noconfigdirs target-libffi"
;;
*-*-uclinux*)
noconfigdirs="$noconfigdirs target-libffi"
;;
*-*-vxworks*)
noconfigdirs="$noconfigdirs target-libffi"
;;
2016-10-10 23:31:17 +02:00
aarch64*-*-freebsd*)
noconfigdirs="$noconfigdirs target-libffi"
;;
2016-10-01 00:46:39 +02:00
alpha*-*-*vms*)
noconfigdirs="$noconfigdirs target-libffi"
;;
arm*-*-freebsd*)
noconfigdirs="$noconfigdirs target-libffi"
;;
arm-wince-pe)
noconfigdirs="$noconfigdirs target-libffi"
;;
arm*-*-symbianelf*)
noconfigdirs="$noconfigdirs target-libffi"
;;
cris-*-* | crisv32-*-*)
case "${target}" in
*-*-linux*)
;;
*) # See PR46792 regarding target-libffi.
noconfigdirs="$noconfigdirs target-libffi";;
esac
;;
hppa*64*-*-hpux*)
noconfigdirs="$noconfigdirs target-libffi"
;;
hppa*-hp-hpux11*)
;;
hppa*-*-hpux*)
noconfigdirs="$noconfigdirs target-libffi"
;;
ia64*-*-*vms*)
noconfigdirs="$noconfigdirs target-libffi"
;;
i[[3456789]]86-w64-mingw*)
noconfigdirs="$noconfigdirs target-libffi"
;;
i[[3456789]]86-*-mingw*)
noconfigdirs="$noconfigdirs target-libffi"
;;
x86_64-*-mingw*)
noconfigdirs="$noconfigdirs target-libffi"
;;
mmix-*-*)
noconfigdirs="$noconfigdirs target-libffi"
;;
powerpc-*-aix*)
# copied from rs6000-*-* entry
noconfigdirs="$noconfigdirs target-libffi"
;;
rs6000-*-aix*)
noconfigdirs="$noconfigdirs target-libffi"
;;
ft32-*-*)
noconfigdirs="$noconfigdirs target-libffi"
;;
*-*-lynxos*)
noconfigdirs="$noconfigdirs target-libffi"
;;
esac
# Disable the go frontend on systems where it is known to not work. Please keep
# this in sync with contrib/config-list.mk.
case "${target}" in
*-*-darwin* | *-*-cygwin* | *-*-mingw* | *-*-aix*)
unsupported_languages="$unsupported_languages go"
;;
esac
2013-02-05 23:36:20 +01:00
# Disable libgo for some systems where it is known to not work.
# For testing, you can easily override this with --enable-libgo.
if test x$enable_libgo = x; then
case "${target}" in
*-*-darwin*)
# PR 46986
noconfigdirs="$noconfigdirs target-libgo"
;;
*-*-cygwin* | *-*-mingw*)
noconfigdirs="$noconfigdirs target-libgo"
;;
*-*-aix*)
noconfigdirs="$noconfigdirs target-libgo"
;;
esac
fi
2017-01-24 13:45:56 +01:00
# Disable the BRIG frontend and libhsail-rt on untested or known
# broken systems. Currently it has been tested only on x86_64 Linux
# of the upstream gcc targets. More targets shall be added after testing.
case "${target}" in
x86_64-*-linux*)
;;
*)
unsupported_languages="$unsupported_languages brig"
# This implicitly disables also target-libhsail-rt as it won't
# get added to the build without BRIG FE.
;;
esac
2007-09-10 16:20:10 +02:00
# Default libgloss CPU subdirectory.
libgloss_dir="$target_cpu"
2004-05-13 08:41:07 +02:00
2011-05-04 11:50:18 +02:00
case "${target}" in
sh*-*-pe|mips*-*-pe|*arm-wince-pe)
libgloss_dir=wince
;;
2013-02-15 18:45:54 +01:00
aarch64*-*-* )
libgloss_dir=aarch64
;;
2011-05-04 11:50:18 +02:00
arm*-*-*)
libgloss_dir=arm
;;
cris-*-* | crisv32-*-*)
libgloss_dir=cris
;;
hppa*-*-*)
libgloss_dir=pa
;;
i[[3456789]]86-*-*)
libgloss_dir=i386
;;
m68hc11-*-*|m6811-*-*|m68hc12-*-*|m6812-*-*)
libgloss_dir=m68hc11
;;
m68*-*-* | fido-*-*)
libgloss_dir=m68k
;;
mips*-*-*)
libgloss_dir=mips
;;
powerpc*-*-*)
libgloss_dir=rs6000
;;
sparc*-*-*)
libgloss_dir=sparc
;;
esac
* configure.ac (alpha*-dec-osf*, i[[3456789]]86-*-rdos*,
sh*-*-pe|mips*-*-pe|arm-wince-pe, sparc-*-sunos4*, *-*-aix*,
*-*-beos*, *-*-chorusos, *-*-dragonfly*, *-*-freebsd*, *-*-linux*
| *-*-gnu* | *-*-k*bsd*-gnu | *-*-kopensolaris*-gnu, *-*-lynxos*,
*-*-mingw*, *-*-netbsd*, *-*-netware*, *-*-tpf*, *-*-uclinux*,
*-*-vxworks*): Disable newlib and libgloss in separate case
statement.
(i[[3456789]]86-*-linux*): Move logic allowing newlib to be built
to separate case statement.
(*-*-chorusos, *-*-dragonfly*, *-*-freebsd*, *-*-netbsd*,
*-*-netware*, *-*-tpf*, *-*-uclinux*, *-*-vxworks*,
alpha*-dec-osf*, alpha*-*-linux*, am33_2.0-*-linux*, sh-*-linux*,
sh*-*-pe|mips*-*-pe|*arm-wince-pe, arm-*-coff, arm-*-elf* |
arm*-*-eabi*, arm*-*-linux-gnueabi, arm*-*-symbianelf*, avr-*-*,
bfin-*-*, cris-*-* | crisv32-*-*, frv-*-*, i[[3456789]]86-*-coff |
i[[3456789]]86-*-elf, i[[3456789]]86-w64-mingw*,
i[[3456789]]86-*-mingw*, x86_64-*-mingw*,
i[[3456789]]86-*-interix*, i[[3456789]]86-*-beos*,
i[[3456789]]86-*-rdos*, m32r-*-*,
m68hc11-*-*|m6811-*-*|m68hc12-*-*|m6812-*-*, m68k-*-elf*, m68*-*-*
| fido-*-*, powerpc-*-aix*, powerpc-*-beos*, powerpc-*-eabi,
powerpc-*-eabi* | powerpcle-*-eabi* | powerpc-*-rtems*,
rs6000-*-lynxos*, rs6000-*-aix*, mips*-*-linux*, sparclet-*-aout*
| sparc86x-*-*, sparc-*-elf*, sparc64-*-elf*, sparclite-*-*,
sparc-*-sunos4*, sparc-*-solaris* | sparc64-*-solaris* |
sparcv9-*-solaris*, *-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu |
*-*-kopensolaris*-gnu, *-*-lynxos*, *-*-*): Don't disable newlib
and libgloss in main case over targets. Remove most empty cases
in main case over targets.
* configure: Regenerate.
From-SVN: r173430
2011-05-05 14:38:18 +02:00
# Disable newlib and libgloss for various target OSes.
1997-08-22 00:57:35 +02:00
case "${target}" in
* configure.ac (alpha*-dec-osf*, i[[3456789]]86-*-rdos*,
sh*-*-pe|mips*-*-pe|arm-wince-pe, sparc-*-sunos4*, *-*-aix*,
*-*-beos*, *-*-chorusos, *-*-dragonfly*, *-*-freebsd*, *-*-linux*
| *-*-gnu* | *-*-k*bsd*-gnu | *-*-kopensolaris*-gnu, *-*-lynxos*,
*-*-mingw*, *-*-netbsd*, *-*-netware*, *-*-tpf*, *-*-uclinux*,
*-*-vxworks*): Disable newlib and libgloss in separate case
statement.
(i[[3456789]]86-*-linux*): Move logic allowing newlib to be built
to separate case statement.
(*-*-chorusos, *-*-dragonfly*, *-*-freebsd*, *-*-netbsd*,
*-*-netware*, *-*-tpf*, *-*-uclinux*, *-*-vxworks*,
alpha*-dec-osf*, alpha*-*-linux*, am33_2.0-*-linux*, sh-*-linux*,
sh*-*-pe|mips*-*-pe|*arm-wince-pe, arm-*-coff, arm-*-elf* |
arm*-*-eabi*, arm*-*-linux-gnueabi, arm*-*-symbianelf*, avr-*-*,
bfin-*-*, cris-*-* | crisv32-*-*, frv-*-*, i[[3456789]]86-*-coff |
i[[3456789]]86-*-elf, i[[3456789]]86-w64-mingw*,
i[[3456789]]86-*-mingw*, x86_64-*-mingw*,
i[[3456789]]86-*-interix*, i[[3456789]]86-*-beos*,
i[[3456789]]86-*-rdos*, m32r-*-*,
m68hc11-*-*|m6811-*-*|m68hc12-*-*|m6812-*-*, m68k-*-elf*, m68*-*-*
| fido-*-*, powerpc-*-aix*, powerpc-*-beos*, powerpc-*-eabi,
powerpc-*-eabi* | powerpcle-*-eabi* | powerpc-*-rtems*,
rs6000-*-lynxos*, rs6000-*-aix*, mips*-*-linux*, sparclet-*-aout*
| sparc86x-*-*, sparc-*-elf*, sparc64-*-elf*, sparclite-*-*,
sparc-*-sunos4*, sparc-*-solaris* | sparc64-*-solaris* |
sparcv9-*-solaris*, *-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu |
*-*-kopensolaris*-gnu, *-*-lynxos*, *-*-*): Don't disable newlib
and libgloss in main case over targets. Remove most empty cases
in main case over targets.
* configure: Regenerate.
From-SVN: r173430
2011-05-05 14:38:18 +02:00
alpha*-dec-osf*)
noconfigdirs="$noconfigdirs target-newlib target-libgloss"
;;
i[[3456789]]86-*-linux*)
# This section makes it possible to build newlib natively on linux.
# If we are using a cross compiler then don't configure newlib.
if test x${is_cross_compiler} != xno ; then
noconfigdirs="$noconfigdirs target-newlib"
fi
noconfigdirs="$noconfigdirs target-libgloss"
# If we are not using a cross compiler, do configure newlib.
# Note however, that newlib will only be configured in this situation
# if the --with-newlib option has been given, because otherwise
# 'target-newlib' will appear in skipdirs.
;;
i[[3456789]]86-*-rdos*)
noconfigdirs="$noconfigdirs target-newlib target-libgloss"
;;
sh*-*-pe|mips*-*-pe|arm-wince-pe)
noconfigdirs="$noconfigdirs target-newlib target-libgloss"
;;
sparc-*-sunos4*)
noconfigdirs="$noconfigdirs target-newlib target-libgloss"
;;
*-*-aix*)
noconfigdirs="$noconfigdirs target-newlib target-libgloss"
;;
*-*-beos*)
noconfigdirs="$noconfigdirs target-newlib target-libgloss"
;;
2001-04-23 18:47:08 +02:00
*-*-chorusos)
configure.ac (*-*-chorusos): Don't disable libgcj.
* configure.ac (*-*-chorusos): Don't disable libgcj.
(*-*-freebsd[[12]] | *-*-freebsd[[12]].* | *-*-freebsd*aout*):
Remove case.
(*-*-kaos*): Don't disable GCC libraries, zlib or fastjar.
(arm-*-coff): Don't disable libgcj.
(arm*-*-linux-gnueabi): Remove useless assignment.
(arm-*-riscix*): Don't disable libgcj.
(bfin-*-*): Don't enable target-bsp and target-cygmon depending on
configuration.
(c4x-*-* | tic4x-*-*): Don't disable GCC libraries.
(c54x*-*-*): Remove case.
(tic54x-*-*): Don't disable GCC or GCC libraries.
(cris-*-* | crisv32-*-*): Don't handle *-*-aout. Change *-*-elf
to *.
(d10v-*-*): Don't disable GCC libraries.
(d30v-*-*): Don't disable libgcj.
(h8500-*-*): Don't disable GCC libraries.
(i960-*-*): Don't disable libgcj.
(i[[3456789]]86-*-linux*): Don't handle *-*-*libc1*.
(i[[3456789]]86-*-sco3.2v5*, i[[3456789]]86-*-sco*,
i[[3456789]]86-*-sysv4*, i[[3456789]]86-*-beos*): Don't disable
libgcj.
(m68k-*-coff*): Remove case.
(mmix-*-*): Don't disable libgloss on host.
(mn10200-*-*, mn10300-*-*): Remove cases.
(powerpc*-*-winnt* | powerpc*-*-pe*, powerpcle-*-solaris*,
powerpc-*-beos*, m68k-apollo-*, mips*-*-irix5*, mips*-*-bsd*):
Don't disable libgcj.
(romp-*-*): Remove case.
(sparclite-*-*, sparc-*-sunos4*): Don't disable libgcj.
(sparc-*-solaris2.[[0-6]] | sparc-*-solaris2.[[0-6]].*): Remove
case.
(v810-*-*): Don't disable GCC libraries.
(v850*-*-*, vax-*-vms, xtensa*-*-*): Remove cases.
(ip2k-*-*): Don't disable GCC libraries.
* configure: Regenerate.
From-SVN: r171826
2011-04-01 13:57:09 +02:00
noconfigdirs="$noconfigdirs target-newlib target-libgloss"
2001-04-23 18:47:08 +02:00
;;
* configure.ac (alpha*-dec-osf*, i[[3456789]]86-*-rdos*,
sh*-*-pe|mips*-*-pe|arm-wince-pe, sparc-*-sunos4*, *-*-aix*,
*-*-beos*, *-*-chorusos, *-*-dragonfly*, *-*-freebsd*, *-*-linux*
| *-*-gnu* | *-*-k*bsd*-gnu | *-*-kopensolaris*-gnu, *-*-lynxos*,
*-*-mingw*, *-*-netbsd*, *-*-netware*, *-*-tpf*, *-*-uclinux*,
*-*-vxworks*): Disable newlib and libgloss in separate case
statement.
(i[[3456789]]86-*-linux*): Move logic allowing newlib to be built
to separate case statement.
(*-*-chorusos, *-*-dragonfly*, *-*-freebsd*, *-*-netbsd*,
*-*-netware*, *-*-tpf*, *-*-uclinux*, *-*-vxworks*,
alpha*-dec-osf*, alpha*-*-linux*, am33_2.0-*-linux*, sh-*-linux*,
sh*-*-pe|mips*-*-pe|*arm-wince-pe, arm-*-coff, arm-*-elf* |
arm*-*-eabi*, arm*-*-linux-gnueabi, arm*-*-symbianelf*, avr-*-*,
bfin-*-*, cris-*-* | crisv32-*-*, frv-*-*, i[[3456789]]86-*-coff |
i[[3456789]]86-*-elf, i[[3456789]]86-w64-mingw*,
i[[3456789]]86-*-mingw*, x86_64-*-mingw*,
i[[3456789]]86-*-interix*, i[[3456789]]86-*-beos*,
i[[3456789]]86-*-rdos*, m32r-*-*,
m68hc11-*-*|m6811-*-*|m68hc12-*-*|m6812-*-*, m68k-*-elf*, m68*-*-*
| fido-*-*, powerpc-*-aix*, powerpc-*-beos*, powerpc-*-eabi,
powerpc-*-eabi* | powerpcle-*-eabi* | powerpc-*-rtems*,
rs6000-*-lynxos*, rs6000-*-aix*, mips*-*-linux*, sparclet-*-aout*
| sparc86x-*-*, sparc-*-elf*, sparc64-*-elf*, sparclite-*-*,
sparc-*-sunos4*, sparc-*-solaris* | sparc64-*-solaris* |
sparcv9-*-solaris*, *-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu |
*-*-kopensolaris*-gnu, *-*-lynxos*, *-*-*): Don't disable newlib
and libgloss in main case over targets. Remove most empty cases
in main case over targets.
* configure: Regenerate.
From-SVN: r173430
2011-05-05 14:38:18 +02:00
*-*-dragonfly*)
noconfigdirs="$noconfigdirs target-newlib target-libgloss"
;;
*-*-freebsd*)
noconfigdirs="$noconfigdirs target-newlib target-libgloss"
;;
*-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu | *-*-kopensolaris*-gnu)
noconfigdirs="$noconfigdirs target-newlib target-libgloss"
;;
*-*-lynxos*)
noconfigdirs="$noconfigdirs target-newlib target-libgloss"
;;
*-*-mingw*)
noconfigdirs="$noconfigdirs target-newlib target-libgloss"
;;
*-*-netbsd*)
noconfigdirs="$noconfigdirs target-newlib target-libgloss"
;;
*-*-netware*)
noconfigdirs="$noconfigdirs target-newlib target-libgloss"
;;
*-*-tpf*)
noconfigdirs="$noconfigdirs target-newlib target-libgloss"
;;
*-*-uclinux*)
noconfigdirs="$noconfigdirs target-newlib target-libgloss"
;;
*-*-vxworks*)
noconfigdirs="$noconfigdirs target-newlib target-libgloss"
;;
esac
case "${target}" in
*-*-chorusos)
;;
2015-11-20 15:24:07 +01:00
aarch64-*-darwin*)
noconfigdirs="$noconfigdirs ld gas gdb gprof"
noconfigdirs="$noconfigdirs sim target-rda"
;;
arm-*-darwin*)
noconfigdirs="$noconfigdirs ld gas gdb gprof"
noconfigdirs="$noconfigdirs sim target-rda"
;;
2009-03-16 18:02:02 +01:00
powerpc-*-darwin*)
2008-08-28 17:35:34 +02:00
noconfigdirs="$noconfigdirs ld gas gdb gprof"
2005-07-07 03:12:59 +02:00
noconfigdirs="$noconfigdirs sim target-rda"
2003-08-20 02:50:20 +02:00
;;
2009-08-16 17:09:13 +02:00
i[[3456789]]86-*-darwin*)
noconfigdirs="$noconfigdirs ld gprof"
noconfigdirs="$noconfigdirs sim target-rda"
;;
x86_64-*-darwin[[912]]*)
2008-11-27 17:52:32 +01:00
noconfigdirs="$noconfigdirs ld gas gprof"
noconfigdirs="$noconfigdirs sim target-rda"
;;
2006-12-10 20:32:30 +01:00
*-*-darwin*)
noconfigdirs="$noconfigdirs ld gas gdb gprof"
noconfigdirs="$noconfigdirs sim target-rda"
;;
2011-03-28 13:21:17 +02:00
*-*-dragonfly*)
;;
2004-08-18 00:06:46 +02:00
*-*-freebsd*)
2004-05-13 08:41:07 +02:00
if test "x$with_gmp" = x && test "x$with_gmp_dir" = x \
&& test -f /usr/local/include/gmp.h; then
with_gmp=/usr/local
fi
;;
2003-02-25 11:45:00 +01:00
*-*-kaos*)
# Remove unsupported stuff on all kaOS configurations.
noconfigdirs="$noconfigdirs target-libgloss"
;;
2002-01-27 03:41:37 +01:00
*-*-netbsd*)
;;
2004-09-03 20:10:08 +02:00
*-*-netware*)
1997-08-22 00:57:35 +02:00
;;
2016-06-23 09:12:16 +02:00
*-*-phoenix*)
noconfigdirs="$noconfigdirs target-libgloss"
;;
1997-09-06 01:15:09 +02:00
*-*-rtems*)
2011-04-28 15:23:08 +02:00
noconfigdirs="$noconfigdirs target-libgloss"
2014-11-26 22:53:04 +01:00
# this is not caught below because this stanza matches earlier
case $target in
or1k*-*-*) noconfigdirs="$noconfigdirs gdb" ;;
esac
1997-09-06 01:15:09 +02:00
;;
2005-07-13 20:15:43 +02:00
# The tpf target doesn't support gdb yet.
*-*-tpf*)
* configure.ac (alpha*-dec-osf*, i[[3456789]]86-*-rdos*,
sh*-*-pe|mips*-*-pe|arm-wince-pe, sparc-*-sunos4*, *-*-aix*,
*-*-beos*, *-*-chorusos, *-*-dragonfly*, *-*-freebsd*, *-*-linux*
| *-*-gnu* | *-*-k*bsd*-gnu | *-*-kopensolaris*-gnu, *-*-lynxos*,
*-*-mingw*, *-*-netbsd*, *-*-netware*, *-*-tpf*, *-*-uclinux*,
*-*-vxworks*): Disable newlib and libgloss in separate case
statement.
(i[[3456789]]86-*-linux*): Move logic allowing newlib to be built
to separate case statement.
(*-*-chorusos, *-*-dragonfly*, *-*-freebsd*, *-*-netbsd*,
*-*-netware*, *-*-tpf*, *-*-uclinux*, *-*-vxworks*,
alpha*-dec-osf*, alpha*-*-linux*, am33_2.0-*-linux*, sh-*-linux*,
sh*-*-pe|mips*-*-pe|*arm-wince-pe, arm-*-coff, arm-*-elf* |
arm*-*-eabi*, arm*-*-linux-gnueabi, arm*-*-symbianelf*, avr-*-*,
bfin-*-*, cris-*-* | crisv32-*-*, frv-*-*, i[[3456789]]86-*-coff |
i[[3456789]]86-*-elf, i[[3456789]]86-w64-mingw*,
i[[3456789]]86-*-mingw*, x86_64-*-mingw*,
i[[3456789]]86-*-interix*, i[[3456789]]86-*-beos*,
i[[3456789]]86-*-rdos*, m32r-*-*,
m68hc11-*-*|m6811-*-*|m68hc12-*-*|m6812-*-*, m68k-*-elf*, m68*-*-*
| fido-*-*, powerpc-*-aix*, powerpc-*-beos*, powerpc-*-eabi,
powerpc-*-eabi* | powerpcle-*-eabi* | powerpc-*-rtems*,
rs6000-*-lynxos*, rs6000-*-aix*, mips*-*-linux*, sparclet-*-aout*
| sparc86x-*-*, sparc-*-elf*, sparc64-*-elf*, sparclite-*-*,
sparc-*-sunos4*, sparc-*-solaris* | sparc64-*-solaris* |
sparcv9-*-solaris*, *-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu |
*-*-kopensolaris*-gnu, *-*-lynxos*, *-*-*): Don't disable newlib
and libgloss in main case over targets. Remove most empty cases
in main case over targets.
* configure: Regenerate.
From-SVN: r173430
2011-05-05 14:38:18 +02:00
noconfigdirs="$noconfigdirs gdb tcl tk libgui itcl"
2005-07-13 20:15:43 +02:00
;;
2003-12-21 06:11:42 +01:00
*-*-uclinux*)
* configure.ac (alpha*-dec-osf*, i[[3456789]]86-*-rdos*,
sh*-*-pe|mips*-*-pe|arm-wince-pe, sparc-*-sunos4*, *-*-aix*,
*-*-beos*, *-*-chorusos, *-*-dragonfly*, *-*-freebsd*, *-*-linux*
| *-*-gnu* | *-*-k*bsd*-gnu | *-*-kopensolaris*-gnu, *-*-lynxos*,
*-*-mingw*, *-*-netbsd*, *-*-netware*, *-*-tpf*, *-*-uclinux*,
*-*-vxworks*): Disable newlib and libgloss in separate case
statement.
(i[[3456789]]86-*-linux*): Move logic allowing newlib to be built
to separate case statement.
(*-*-chorusos, *-*-dragonfly*, *-*-freebsd*, *-*-netbsd*,
*-*-netware*, *-*-tpf*, *-*-uclinux*, *-*-vxworks*,
alpha*-dec-osf*, alpha*-*-linux*, am33_2.0-*-linux*, sh-*-linux*,
sh*-*-pe|mips*-*-pe|*arm-wince-pe, arm-*-coff, arm-*-elf* |
arm*-*-eabi*, arm*-*-linux-gnueabi, arm*-*-symbianelf*, avr-*-*,
bfin-*-*, cris-*-* | crisv32-*-*, frv-*-*, i[[3456789]]86-*-coff |
i[[3456789]]86-*-elf, i[[3456789]]86-w64-mingw*,
i[[3456789]]86-*-mingw*, x86_64-*-mingw*,
i[[3456789]]86-*-interix*, i[[3456789]]86-*-beos*,
i[[3456789]]86-*-rdos*, m32r-*-*,
m68hc11-*-*|m6811-*-*|m68hc12-*-*|m6812-*-*, m68k-*-elf*, m68*-*-*
| fido-*-*, powerpc-*-aix*, powerpc-*-beos*, powerpc-*-eabi,
powerpc-*-eabi* | powerpcle-*-eabi* | powerpc-*-rtems*,
rs6000-*-lynxos*, rs6000-*-aix*, mips*-*-linux*, sparclet-*-aout*
| sparc86x-*-*, sparc-*-elf*, sparc64-*-elf*, sparclite-*-*,
sparc-*-sunos4*, sparc-*-solaris* | sparc64-*-solaris* |
sparcv9-*-solaris*, *-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu |
*-*-kopensolaris*-gnu, *-*-lynxos*, *-*-*): Don't disable newlib
and libgloss in main case over targets. Remove most empty cases
in main case over targets.
* configure: Regenerate.
From-SVN: r173430
2011-05-05 14:38:18 +02:00
noconfigdirs="$noconfigdirs target-rda"
2003-12-21 06:11:42 +01:00
;;
1997-08-22 00:57:35 +02:00
*-*-vxworks*)
;;
1997-12-22 03:40:10 +01:00
alpha*-dec-osf*)
2002-05-13 23:16:48 +02:00
# ld works, but does not support shared libraries.
1997-08-22 00:57:35 +02:00
# gas doesn't generate exception information.
* configure.ac (alpha*-dec-osf*, i[[3456789]]86-*-rdos*,
sh*-*-pe|mips*-*-pe|arm-wince-pe, sparc-*-sunos4*, *-*-aix*,
*-*-beos*, *-*-chorusos, *-*-dragonfly*, *-*-freebsd*, *-*-linux*
| *-*-gnu* | *-*-k*bsd*-gnu | *-*-kopensolaris*-gnu, *-*-lynxos*,
*-*-mingw*, *-*-netbsd*, *-*-netware*, *-*-tpf*, *-*-uclinux*,
*-*-vxworks*): Disable newlib and libgloss in separate case
statement.
(i[[3456789]]86-*-linux*): Move logic allowing newlib to be built
to separate case statement.
(*-*-chorusos, *-*-dragonfly*, *-*-freebsd*, *-*-netbsd*,
*-*-netware*, *-*-tpf*, *-*-uclinux*, *-*-vxworks*,
alpha*-dec-osf*, alpha*-*-linux*, am33_2.0-*-linux*, sh-*-linux*,
sh*-*-pe|mips*-*-pe|*arm-wince-pe, arm-*-coff, arm-*-elf* |
arm*-*-eabi*, arm*-*-linux-gnueabi, arm*-*-symbianelf*, avr-*-*,
bfin-*-*, cris-*-* | crisv32-*-*, frv-*-*, i[[3456789]]86-*-coff |
i[[3456789]]86-*-elf, i[[3456789]]86-w64-mingw*,
i[[3456789]]86-*-mingw*, x86_64-*-mingw*,
i[[3456789]]86-*-interix*, i[[3456789]]86-*-beos*,
i[[3456789]]86-*-rdos*, m32r-*-*,
m68hc11-*-*|m6811-*-*|m68hc12-*-*|m6812-*-*, m68k-*-elf*, m68*-*-*
| fido-*-*, powerpc-*-aix*, powerpc-*-beos*, powerpc-*-eabi,
powerpc-*-eabi* | powerpcle-*-eabi* | powerpc-*-rtems*,
rs6000-*-lynxos*, rs6000-*-aix*, mips*-*-linux*, sparclet-*-aout*
| sparc86x-*-*, sparc-*-elf*, sparc64-*-elf*, sparclite-*-*,
sparc-*-sunos4*, sparc-*-solaris* | sparc64-*-solaris* |
sparcv9-*-solaris*, *-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu |
*-*-kopensolaris*-gnu, *-*-lynxos*, *-*-*): Don't disable newlib
and libgloss in main case over targets. Remove most empty cases
in main case over targets.
* configure: Regenerate.
From-SVN: r173430
2011-05-05 14:38:18 +02:00
noconfigdirs="$noconfigdirs gas ld"
1997-08-22 00:57:35 +02:00
;;
alpha*-*-*vms*)
2011-04-28 15:23:08 +02:00
noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss"
1997-08-22 00:57:35 +02:00
;;
alpha*-*-*)
# newlib is not 64 bit ready
2011-04-28 15:23:08 +02:00
noconfigdirs="$noconfigdirs target-newlib target-libgloss"
1997-08-22 00:57:35 +02:00
;;
2000-02-23 02:25:56 +01:00
sh*-*-pe|mips*-*-pe|*arm-wince-pe)
2004-08-13 01:00:39 +02:00
noconfigdirs="$noconfigdirs tcl tk itcl libgui sim"
2000-02-23 02:25:56 +01:00
;;
2016-09-26 18:18:28 +02:00
arc*-*-*)
noconfigdirs="$noconfigdirs sim"
;;
1997-08-22 00:57:35 +02:00
arm-*-pe*)
2011-04-28 15:23:08 +02:00
noconfigdirs="$noconfigdirs target-libgloss"
1997-08-22 00:57:35 +02:00
;;
1998-10-12 12:44:57 +02:00
arm-*-riscix*)
configure.ac (*-*-chorusos): Don't disable libgcj.
* configure.ac (*-*-chorusos): Don't disable libgcj.
(*-*-freebsd[[12]] | *-*-freebsd[[12]].* | *-*-freebsd*aout*):
Remove case.
(*-*-kaos*): Don't disable GCC libraries, zlib or fastjar.
(arm-*-coff): Don't disable libgcj.
(arm*-*-linux-gnueabi): Remove useless assignment.
(arm-*-riscix*): Don't disable libgcj.
(bfin-*-*): Don't enable target-bsp and target-cygmon depending on
configuration.
(c4x-*-* | tic4x-*-*): Don't disable GCC libraries.
(c54x*-*-*): Remove case.
(tic54x-*-*): Don't disable GCC or GCC libraries.
(cris-*-* | crisv32-*-*): Don't handle *-*-aout. Change *-*-elf
to *.
(d10v-*-*): Don't disable GCC libraries.
(d30v-*-*): Don't disable libgcj.
(h8500-*-*): Don't disable GCC libraries.
(i960-*-*): Don't disable libgcj.
(i[[3456789]]86-*-linux*): Don't handle *-*-*libc1*.
(i[[3456789]]86-*-sco3.2v5*, i[[3456789]]86-*-sco*,
i[[3456789]]86-*-sysv4*, i[[3456789]]86-*-beos*): Don't disable
libgcj.
(m68k-*-coff*): Remove case.
(mmix-*-*): Don't disable libgloss on host.
(mn10200-*-*, mn10300-*-*): Remove cases.
(powerpc*-*-winnt* | powerpc*-*-pe*, powerpcle-*-solaris*,
powerpc-*-beos*, m68k-apollo-*, mips*-*-irix5*, mips*-*-bsd*):
Don't disable libgcj.
(romp-*-*): Remove case.
(sparclite-*-*, sparc-*-sunos4*): Don't disable libgcj.
(sparc-*-solaris2.[[0-6]] | sparc-*-solaris2.[[0-6]].*): Remove
case.
(v810-*-*): Don't disable GCC libraries.
(v850*-*-*, vax-*-vms, xtensa*-*-*): Remove cases.
(ip2k-*-*): Don't disable GCC libraries.
* configure: Regenerate.
From-SVN: r171826
2011-04-01 13:57:09 +02:00
noconfigdirs="$noconfigdirs ld target-libgloss"
1998-10-12 12:44:57 +02:00
;;
2012-09-05 10:47:50 +02:00
avr-*-*)
if test x${with_avrlibc} != xno; then
noconfigdirs="$noconfigdirs target-newlib target-libgloss"
fi
;;
2002-10-07 23:07:06 +02:00
c4x-*-* | tic4x-*-*)
configure.ac (*-*-chorusos): Don't disable libgcj.
* configure.ac (*-*-chorusos): Don't disable libgcj.
(*-*-freebsd[[12]] | *-*-freebsd[[12]].* | *-*-freebsd*aout*):
Remove case.
(*-*-kaos*): Don't disable GCC libraries, zlib or fastjar.
(arm-*-coff): Don't disable libgcj.
(arm*-*-linux-gnueabi): Remove useless assignment.
(arm-*-riscix*): Don't disable libgcj.
(bfin-*-*): Don't enable target-bsp and target-cygmon depending on
configuration.
(c4x-*-* | tic4x-*-*): Don't disable GCC libraries.
(c54x*-*-*): Remove case.
(tic54x-*-*): Don't disable GCC or GCC libraries.
(cris-*-* | crisv32-*-*): Don't handle *-*-aout. Change *-*-elf
to *.
(d10v-*-*): Don't disable GCC libraries.
(d30v-*-*): Don't disable libgcj.
(h8500-*-*): Don't disable GCC libraries.
(i960-*-*): Don't disable libgcj.
(i[[3456789]]86-*-linux*): Don't handle *-*-*libc1*.
(i[[3456789]]86-*-sco3.2v5*, i[[3456789]]86-*-sco*,
i[[3456789]]86-*-sysv4*, i[[3456789]]86-*-beos*): Don't disable
libgcj.
(m68k-*-coff*): Remove case.
(mmix-*-*): Don't disable libgloss on host.
(mn10200-*-*, mn10300-*-*): Remove cases.
(powerpc*-*-winnt* | powerpc*-*-pe*, powerpcle-*-solaris*,
powerpc-*-beos*, m68k-apollo-*, mips*-*-irix5*, mips*-*-bsd*):
Don't disable libgcj.
(romp-*-*): Remove case.
(sparclite-*-*, sparc-*-sunos4*): Don't disable libgcj.
(sparc-*-solaris2.[[0-6]] | sparc-*-solaris2.[[0-6]].*): Remove
case.
(v810-*-*): Don't disable GCC libraries.
(v850*-*-*, vax-*-vms, xtensa*-*-*): Remove cases.
(ip2k-*-*): Don't disable GCC libraries.
* configure: Regenerate.
From-SVN: r171826
2011-04-01 13:57:09 +02:00
noconfigdirs="$noconfigdirs target-libgloss"
i2002-04-11 DJ Delorie <dj@redhat.com>
* Makefile.in, configure.in: Sync with binutils, entries
follow...
2002-02-01 Mo DeJong <supermo@bayarea.net>
* Makefile.in: Add all-tix to deps for all-snavigator
so that tix is built when building snavigator.
2002-01-11 Steve Ellcey <sje@cup.hp.com>
* configure.in (ia64*-*-hpux*): New target for IA64 HP-UX,
ld and gdb are not supported.
2002-01-07 Mark Salter <msalter@redhat.com>
* configure.in: Remove target-bsp and target-cygmon from arm builds.
Allow target-libgloss to be built for arm, strongarm, and xscale.
2001-12-13 Thomas Fitzsimmons <fitzsim@redhat.com>
* configure.in (FLAGS_FOR_TARGET): Remove -nostdinc and -isystem
options for i[3456]86-pc-linux* native builds.
2001-11-20 Nick Clifton <nickc@cambridge.redhat.com>
* Makefile.in (do-proto-toplev): Use msgfmt to generate .gmo
files from .po files for a distribution.
2001-09-03 Jeff Holcomb <jeffh@redhat.com>
* configure.in: Enable libstdc++-v3 for h8300 targets.
2001-06-19 Alan Modra <amodra@bigpond.net.au>
* Makefile.in (VER): If AM_INIT_AUTOMAKE uses BFD_VERSION, get
version from bfd/.
Fri Jun 8 11:14:02 2001 Andrew Cagney <cagney@b1.cygnus.com>
* Makefile.in (VER): When present, extract the version number from
the file version.in.
2001-05-24 Tom Rix <trix@redhat.com>
* configure.in : enable ld for aix
2001-02-09 Martin Schwidefsky <schwidefsky@de.ibm.com>
* mh-s390pic: New file.
* mt-s390pic: New file.
2001-02-09 Martin Schwidefsky <schwidefsky@de.ibm.com>
* config.guess: Add linux target for S/390.
2000-11-07 Philip Blundell <pb@futuretv.com>
* Makefile.in (ETC_SUPPORT): Also add configbuild.* and configdev.*.
2000-11-03 Philip Blundell <pb@futuretv.com>
* Makefile.in (ETC_SUPPORT): Add configure.texi and associated info
files.
2001-01-15 Ben Elliston <bje@redhat.com>
* configure.in (host_tools): Add sid.
Always configure cgen.
2000-11-24 Nick Clifton <nickc@redhat.com>
* configure.in (c4x, c5x, tic54x): Move after ARM targets.
2000-08-20 Doug Evans <dje@casey.transmeta.com>
* Makefile.in (ALL_MODULES): Add all-cgen.
(CROSS_CHECK_MODULES,INSTALL_MODULES,CLEAN_MODULES): Similarily.
(all-cgen): New target.
(all-opcodes,all-sim): Depend on all-cgen.
* configure.in (host_tools): Add cgen.
Only configure cgen if --enable-cgen-maint.
From-SVN: r52179
2002-04-11 23:23:35 +02:00
;;
configure.ac (*-*-chorusos): Don't disable libgcj.
* configure.ac (*-*-chorusos): Don't disable libgcj.
(*-*-freebsd[[12]] | *-*-freebsd[[12]].* | *-*-freebsd*aout*):
Remove case.
(*-*-kaos*): Don't disable GCC libraries, zlib or fastjar.
(arm-*-coff): Don't disable libgcj.
(arm*-*-linux-gnueabi): Remove useless assignment.
(arm-*-riscix*): Don't disable libgcj.
(bfin-*-*): Don't enable target-bsp and target-cygmon depending on
configuration.
(c4x-*-* | tic4x-*-*): Don't disable GCC libraries.
(c54x*-*-*): Remove case.
(tic54x-*-*): Don't disable GCC or GCC libraries.
(cris-*-* | crisv32-*-*): Don't handle *-*-aout. Change *-*-elf
to *.
(d10v-*-*): Don't disable GCC libraries.
(d30v-*-*): Don't disable libgcj.
(h8500-*-*): Don't disable GCC libraries.
(i960-*-*): Don't disable libgcj.
(i[[3456789]]86-*-linux*): Don't handle *-*-*libc1*.
(i[[3456789]]86-*-sco3.2v5*, i[[3456789]]86-*-sco*,
i[[3456789]]86-*-sysv4*, i[[3456789]]86-*-beos*): Don't disable
libgcj.
(m68k-*-coff*): Remove case.
(mmix-*-*): Don't disable libgloss on host.
(mn10200-*-*, mn10300-*-*): Remove cases.
(powerpc*-*-winnt* | powerpc*-*-pe*, powerpcle-*-solaris*,
powerpc-*-beos*, m68k-apollo-*, mips*-*-irix5*, mips*-*-bsd*):
Don't disable libgcj.
(romp-*-*): Remove case.
(sparclite-*-*, sparc-*-sunos4*): Don't disable libgcj.
(sparc-*-solaris2.[[0-6]] | sparc-*-solaris2.[[0-6]].*): Remove
case.
(v810-*-*): Don't disable GCC libraries.
(v850*-*-*, vax-*-vms, xtensa*-*-*): Remove cases.
(ip2k-*-*): Don't disable GCC libraries.
* configure: Regenerate.
From-SVN: r171826
2011-04-01 13:57:09 +02:00
tic54x-*-*)
noconfigdirs="$noconfigdirs target-libgloss gdb"
i2002-04-11 DJ Delorie <dj@redhat.com>
* Makefile.in, configure.in: Sync with binutils, entries
follow...
2002-02-01 Mo DeJong <supermo@bayarea.net>
* Makefile.in: Add all-tix to deps for all-snavigator
so that tix is built when building snavigator.
2002-01-11 Steve Ellcey <sje@cup.hp.com>
* configure.in (ia64*-*-hpux*): New target for IA64 HP-UX,
ld and gdb are not supported.
2002-01-07 Mark Salter <msalter@redhat.com>
* configure.in: Remove target-bsp and target-cygmon from arm builds.
Allow target-libgloss to be built for arm, strongarm, and xscale.
2001-12-13 Thomas Fitzsimmons <fitzsim@redhat.com>
* configure.in (FLAGS_FOR_TARGET): Remove -nostdinc and -isystem
options for i[3456]86-pc-linux* native builds.
2001-11-20 Nick Clifton <nickc@cambridge.redhat.com>
* Makefile.in (do-proto-toplev): Use msgfmt to generate .gmo
files from .po files for a distribution.
2001-09-03 Jeff Holcomb <jeffh@redhat.com>
* configure.in: Enable libstdc++-v3 for h8300 targets.
2001-06-19 Alan Modra <amodra@bigpond.net.au>
* Makefile.in (VER): If AM_INIT_AUTOMAKE uses BFD_VERSION, get
version from bfd/.
Fri Jun 8 11:14:02 2001 Andrew Cagney <cagney@b1.cygnus.com>
* Makefile.in (VER): When present, extract the version number from
the file version.in.
2001-05-24 Tom Rix <trix@redhat.com>
* configure.in : enable ld for aix
2001-02-09 Martin Schwidefsky <schwidefsky@de.ibm.com>
* mh-s390pic: New file.
* mt-s390pic: New file.
2001-02-09 Martin Schwidefsky <schwidefsky@de.ibm.com>
* config.guess: Add linux target for S/390.
2000-11-07 Philip Blundell <pb@futuretv.com>
* Makefile.in (ETC_SUPPORT): Also add configbuild.* and configdev.*.
2000-11-03 Philip Blundell <pb@futuretv.com>
* Makefile.in (ETC_SUPPORT): Add configure.texi and associated info
files.
2001-01-15 Ben Elliston <bje@redhat.com>
* configure.in (host_tools): Add sid.
Always configure cgen.
2000-11-24 Nick Clifton <nickc@redhat.com>
* configure.in (c4x, c5x, tic54x): Move after ARM targets.
2000-08-20 Doug Evans <dje@casey.transmeta.com>
* Makefile.in (ALL_MODULES): Add all-cgen.
(CROSS_CHECK_MODULES,INSTALL_MODULES,CLEAN_MODULES): Similarily.
(all-cgen): New target.
(all-opcodes,all-sim): Depend on all-cgen.
* configure.in (host_tools): Add cgen.
Only configure cgen if --enable-cgen-maint.
From-SVN: r52179
2002-04-11 23:23:35 +02:00
;;
1997-08-22 00:57:35 +02:00
d10v-*-*)
configure.ac (*-*-chorusos): Don't disable libgcj.
* configure.ac (*-*-chorusos): Don't disable libgcj.
(*-*-freebsd[[12]] | *-*-freebsd[[12]].* | *-*-freebsd*aout*):
Remove case.
(*-*-kaos*): Don't disable GCC libraries, zlib or fastjar.
(arm-*-coff): Don't disable libgcj.
(arm*-*-linux-gnueabi): Remove useless assignment.
(arm-*-riscix*): Don't disable libgcj.
(bfin-*-*): Don't enable target-bsp and target-cygmon depending on
configuration.
(c4x-*-* | tic4x-*-*): Don't disable GCC libraries.
(c54x*-*-*): Remove case.
(tic54x-*-*): Don't disable GCC or GCC libraries.
(cris-*-* | crisv32-*-*): Don't handle *-*-aout. Change *-*-elf
to *.
(d10v-*-*): Don't disable GCC libraries.
(d30v-*-*): Don't disable libgcj.
(h8500-*-*): Don't disable GCC libraries.
(i960-*-*): Don't disable libgcj.
(i[[3456789]]86-*-linux*): Don't handle *-*-*libc1*.
(i[[3456789]]86-*-sco3.2v5*, i[[3456789]]86-*-sco*,
i[[3456789]]86-*-sysv4*, i[[3456789]]86-*-beos*): Don't disable
libgcj.
(m68k-*-coff*): Remove case.
(mmix-*-*): Don't disable libgloss on host.
(mn10200-*-*, mn10300-*-*): Remove cases.
(powerpc*-*-winnt* | powerpc*-*-pe*, powerpcle-*-solaris*,
powerpc-*-beos*, m68k-apollo-*, mips*-*-irix5*, mips*-*-bsd*):
Don't disable libgcj.
(romp-*-*): Remove case.
(sparclite-*-*, sparc-*-sunos4*): Don't disable libgcj.
(sparc-*-solaris2.[[0-6]] | sparc-*-solaris2.[[0-6]].*): Remove
case.
(v810-*-*): Don't disable GCC libraries.
(v850*-*-*, vax-*-vms, xtensa*-*-*): Remove cases.
(ip2k-*-*): Don't disable GCC libraries.
* configure: Regenerate.
From-SVN: r171826
2011-04-01 13:57:09 +02:00
noconfigdirs="$noconfigdirs target-libgloss"
2000-07-22 10:08:22 +02:00
;;
d30v-*-*)
configure.ac (*-*-chorusos): Don't disable libgcj.
* configure.ac (*-*-chorusos): Don't disable libgcj.
(*-*-freebsd[[12]] | *-*-freebsd[[12]].* | *-*-freebsd*aout*):
Remove case.
(*-*-kaos*): Don't disable GCC libraries, zlib or fastjar.
(arm-*-coff): Don't disable libgcj.
(arm*-*-linux-gnueabi): Remove useless assignment.
(arm-*-riscix*): Don't disable libgcj.
(bfin-*-*): Don't enable target-bsp and target-cygmon depending on
configuration.
(c4x-*-* | tic4x-*-*): Don't disable GCC libraries.
(c54x*-*-*): Remove case.
(tic54x-*-*): Don't disable GCC or GCC libraries.
(cris-*-* | crisv32-*-*): Don't handle *-*-aout. Change *-*-elf
to *.
(d10v-*-*): Don't disable GCC libraries.
(d30v-*-*): Don't disable libgcj.
(h8500-*-*): Don't disable GCC libraries.
(i960-*-*): Don't disable libgcj.
(i[[3456789]]86-*-linux*): Don't handle *-*-*libc1*.
(i[[3456789]]86-*-sco3.2v5*, i[[3456789]]86-*-sco*,
i[[3456789]]86-*-sysv4*, i[[3456789]]86-*-beos*): Don't disable
libgcj.
(m68k-*-coff*): Remove case.
(mmix-*-*): Don't disable libgloss on host.
(mn10200-*-*, mn10300-*-*): Remove cases.
(powerpc*-*-winnt* | powerpc*-*-pe*, powerpcle-*-solaris*,
powerpc-*-beos*, m68k-apollo-*, mips*-*-irix5*, mips*-*-bsd*):
Don't disable libgcj.
(romp-*-*): Remove case.
(sparclite-*-*, sparc-*-sunos4*): Don't disable libgcj.
(sparc-*-solaris2.[[0-6]] | sparc-*-solaris2.[[0-6]].*): Remove
case.
(v810-*-*): Don't disable GCC libraries.
(v850*-*-*, vax-*-vms, xtensa*-*-*): Remove cases.
(ip2k-*-*): Don't disable GCC libraries.
* configure: Regenerate.
From-SVN: r171826
2011-04-01 13:57:09 +02:00
noconfigdirs="$noconfigdirs gdb"
1997-08-22 00:57:35 +02:00
;;
1999-09-21 17:17:53 +02:00
fr30-*-elf*)
2011-04-28 15:23:08 +02:00
noconfigdirs="$noconfigdirs gdb"
1999-09-21 17:17:53 +02:00
;;
2015-07-14 17:22:24 +02:00
ft32-*-*)
noconfigdirs="$noconfigdirs target-rda gprof"
;;
2009-04-16 19:11:08 +02:00
moxie-*-*)
2015-07-14 17:22:24 +02:00
noconfigdirs="$noconfigdirs"
2009-04-16 19:11:08 +02:00
;;
i2002-04-11 DJ Delorie <dj@redhat.com>
* Makefile.in, configure.in: Sync with binutils, entries
follow...
2002-02-01 Mo DeJong <supermo@bayarea.net>
* Makefile.in: Add all-tix to deps for all-snavigator
so that tix is built when building snavigator.
2002-01-11 Steve Ellcey <sje@cup.hp.com>
* configure.in (ia64*-*-hpux*): New target for IA64 HP-UX,
ld and gdb are not supported.
2002-01-07 Mark Salter <msalter@redhat.com>
* configure.in: Remove target-bsp and target-cygmon from arm builds.
Allow target-libgloss to be built for arm, strongarm, and xscale.
2001-12-13 Thomas Fitzsimmons <fitzsim@redhat.com>
* configure.in (FLAGS_FOR_TARGET): Remove -nostdinc and -isystem
options for i[3456]86-pc-linux* native builds.
2001-11-20 Nick Clifton <nickc@cambridge.redhat.com>
* Makefile.in (do-proto-toplev): Use msgfmt to generate .gmo
files from .po files for a distribution.
2001-09-03 Jeff Holcomb <jeffh@redhat.com>
* configure.in: Enable libstdc++-v3 for h8300 targets.
2001-06-19 Alan Modra <amodra@bigpond.net.au>
* Makefile.in (VER): If AM_INIT_AUTOMAKE uses BFD_VERSION, get
version from bfd/.
Fri Jun 8 11:14:02 2001 Andrew Cagney <cagney@b1.cygnus.com>
* Makefile.in (VER): When present, extract the version number from
the file version.in.
2001-05-24 Tom Rix <trix@redhat.com>
* configure.in : enable ld for aix
2001-02-09 Martin Schwidefsky <schwidefsky@de.ibm.com>
* mh-s390pic: New file.
* mt-s390pic: New file.
2001-02-09 Martin Schwidefsky <schwidefsky@de.ibm.com>
* config.guess: Add linux target for S/390.
2000-11-07 Philip Blundell <pb@futuretv.com>
* Makefile.in (ETC_SUPPORT): Also add configbuild.* and configdev.*.
2000-11-03 Philip Blundell <pb@futuretv.com>
* Makefile.in (ETC_SUPPORT): Add configure.texi and associated info
files.
2001-01-15 Ben Elliston <bje@redhat.com>
* configure.in (host_tools): Add sid.
Always configure cgen.
2000-11-24 Nick Clifton <nickc@redhat.com>
* configure.in (c4x, c5x, tic54x): Move after ARM targets.
2000-08-20 Doug Evans <dje@casey.transmeta.com>
* Makefile.in (ALL_MODULES): Add all-cgen.
(CROSS_CHECK_MODULES,INSTALL_MODULES,CLEAN_MODULES): Similarily.
(all-cgen): New target.
(all-opcodes,all-sim): Depend on all-cgen.
* configure.in (host_tools): Add cgen.
Only configure cgen if --enable-cgen-maint.
From-SVN: r52179
2002-04-11 23:23:35 +02:00
h8300*-*-*)
2011-04-28 15:23:08 +02:00
noconfigdirs="$noconfigdirs target-libgloss"
i2002-04-11 DJ Delorie <dj@redhat.com>
* Makefile.in, configure.in: Sync with binutils, entries
follow...
2002-02-01 Mo DeJong <supermo@bayarea.net>
* Makefile.in: Add all-tix to deps for all-snavigator
so that tix is built when building snavigator.
2002-01-11 Steve Ellcey <sje@cup.hp.com>
* configure.in (ia64*-*-hpux*): New target for IA64 HP-UX,
ld and gdb are not supported.
2002-01-07 Mark Salter <msalter@redhat.com>
* configure.in: Remove target-bsp and target-cygmon from arm builds.
Allow target-libgloss to be built for arm, strongarm, and xscale.
2001-12-13 Thomas Fitzsimmons <fitzsim@redhat.com>
* configure.in (FLAGS_FOR_TARGET): Remove -nostdinc and -isystem
options for i[3456]86-pc-linux* native builds.
2001-11-20 Nick Clifton <nickc@cambridge.redhat.com>
* Makefile.in (do-proto-toplev): Use msgfmt to generate .gmo
files from .po files for a distribution.
2001-09-03 Jeff Holcomb <jeffh@redhat.com>
* configure.in: Enable libstdc++-v3 for h8300 targets.
2001-06-19 Alan Modra <amodra@bigpond.net.au>
* Makefile.in (VER): If AM_INIT_AUTOMAKE uses BFD_VERSION, get
version from bfd/.
Fri Jun 8 11:14:02 2001 Andrew Cagney <cagney@b1.cygnus.com>
* Makefile.in (VER): When present, extract the version number from
the file version.in.
2001-05-24 Tom Rix <trix@redhat.com>
* configure.in : enable ld for aix
2001-02-09 Martin Schwidefsky <schwidefsky@de.ibm.com>
* mh-s390pic: New file.
* mt-s390pic: New file.
2001-02-09 Martin Schwidefsky <schwidefsky@de.ibm.com>
* config.guess: Add linux target for S/390.
2000-11-07 Philip Blundell <pb@futuretv.com>
* Makefile.in (ETC_SUPPORT): Also add configbuild.* and configdev.*.
2000-11-03 Philip Blundell <pb@futuretv.com>
* Makefile.in (ETC_SUPPORT): Add configure.texi and associated info
files.
2001-01-15 Ben Elliston <bje@redhat.com>
* configure.in (host_tools): Add sid.
Always configure cgen.
2000-11-24 Nick Clifton <nickc@redhat.com>
* configure.in (c4x, c5x, tic54x): Move after ARM targets.
2000-08-20 Doug Evans <dje@casey.transmeta.com>
* Makefile.in (ALL_MODULES): Add all-cgen.
(CROSS_CHECK_MODULES,INSTALL_MODULES,CLEAN_MODULES): Similarily.
(all-cgen): New target.
(all-opcodes,all-sim): Depend on all-cgen.
* configure.in (host_tools): Add cgen.
Only configure cgen if --enable-cgen-maint.
From-SVN: r52179
2002-04-11 23:23:35 +02:00
;;
1997-08-22 00:57:35 +02:00
h8500-*-*)
configure.ac (*-*-chorusos): Don't disable libgcj.
* configure.ac (*-*-chorusos): Don't disable libgcj.
(*-*-freebsd[[12]] | *-*-freebsd[[12]].* | *-*-freebsd*aout*):
Remove case.
(*-*-kaos*): Don't disable GCC libraries, zlib or fastjar.
(arm-*-coff): Don't disable libgcj.
(arm*-*-linux-gnueabi): Remove useless assignment.
(arm-*-riscix*): Don't disable libgcj.
(bfin-*-*): Don't enable target-bsp and target-cygmon depending on
configuration.
(c4x-*-* | tic4x-*-*): Don't disable GCC libraries.
(c54x*-*-*): Remove case.
(tic54x-*-*): Don't disable GCC or GCC libraries.
(cris-*-* | crisv32-*-*): Don't handle *-*-aout. Change *-*-elf
to *.
(d10v-*-*): Don't disable GCC libraries.
(d30v-*-*): Don't disable libgcj.
(h8500-*-*): Don't disable GCC libraries.
(i960-*-*): Don't disable libgcj.
(i[[3456789]]86-*-linux*): Don't handle *-*-*libc1*.
(i[[3456789]]86-*-sco3.2v5*, i[[3456789]]86-*-sco*,
i[[3456789]]86-*-sysv4*, i[[3456789]]86-*-beos*): Don't disable
libgcj.
(m68k-*-coff*): Remove case.
(mmix-*-*): Don't disable libgloss on host.
(mn10200-*-*, mn10300-*-*): Remove cases.
(powerpc*-*-winnt* | powerpc*-*-pe*, powerpcle-*-solaris*,
powerpc-*-beos*, m68k-apollo-*, mips*-*-irix5*, mips*-*-bsd*):
Don't disable libgcj.
(romp-*-*): Remove case.
(sparclite-*-*, sparc-*-sunos4*): Don't disable libgcj.
(sparc-*-solaris2.[[0-6]] | sparc-*-solaris2.[[0-6]].*): Remove
case.
(v810-*-*): Don't disable GCC libraries.
(v850*-*-*, vax-*-vms, xtensa*-*-*): Remove cases.
(ip2k-*-*): Don't disable GCC libraries.
* configure: Regenerate.
From-SVN: r171826
2011-04-01 13:57:09 +02:00
noconfigdirs="$noconfigdirs target-libgloss"
1997-08-22 00:57:35 +02:00
;;
2004-10-26 22:31:09 +02:00
hppa1.1-*-osf* | hppa1.1-*-bsd* )
;;
2015-07-14 17:22:24 +02:00
hppa*64*-*-hpux*)
noconfigdirs="$noconfigdirs gdb"
;;
hppa*-*-hpux11*)
noconfigdirs="$noconfigdirs gdb ld"
;;
2011-03-24 14:24:31 +01:00
hppa*64*-*-linux*)
2001-04-13 07:41:45 +02:00
;;
2011-03-22 21:03:41 +01:00
hppa*-*-linux*)
2004-11-26 02:24:42 +01:00
;;
1997-08-22 00:57:35 +02:00
hppa*-*-*elf* | \
2000-05-18 19:04:14 +02:00
hppa*-*-lites* | \
2002-08-06 11:26:29 +02:00
hppa*-*-openbsd* | \
2000-05-18 19:04:14 +02:00
hppa*64*-*-*)
1997-08-22 00:57:35 +02:00
;;
2007-09-10 16:20:10 +02:00
hppa*-*-pro*)
;;
1997-08-22 00:57:35 +02:00
hppa*-*-*)
2011-04-28 15:23:08 +02:00
noconfigdirs="$noconfigdirs ld"
2000-07-22 10:08:22 +02:00
;;
2003-06-23 02:42:54 +02:00
i960-*-*)
configure.ac (*-*-chorusos): Don't disable libgcj.
* configure.ac (*-*-chorusos): Don't disable libgcj.
(*-*-freebsd[[12]] | *-*-freebsd[[12]].* | *-*-freebsd*aout*):
Remove case.
(*-*-kaos*): Don't disable GCC libraries, zlib or fastjar.
(arm-*-coff): Don't disable libgcj.
(arm*-*-linux-gnueabi): Remove useless assignment.
(arm-*-riscix*): Don't disable libgcj.
(bfin-*-*): Don't enable target-bsp and target-cygmon depending on
configuration.
(c4x-*-* | tic4x-*-*): Don't disable GCC libraries.
(c54x*-*-*): Remove case.
(tic54x-*-*): Don't disable GCC or GCC libraries.
(cris-*-* | crisv32-*-*): Don't handle *-*-aout. Change *-*-elf
to *.
(d10v-*-*): Don't disable GCC libraries.
(d30v-*-*): Don't disable libgcj.
(h8500-*-*): Don't disable GCC libraries.
(i960-*-*): Don't disable libgcj.
(i[[3456789]]86-*-linux*): Don't handle *-*-*libc1*.
(i[[3456789]]86-*-sco3.2v5*, i[[3456789]]86-*-sco*,
i[[3456789]]86-*-sysv4*, i[[3456789]]86-*-beos*): Don't disable
libgcj.
(m68k-*-coff*): Remove case.
(mmix-*-*): Don't disable libgloss on host.
(mn10200-*-*, mn10300-*-*): Remove cases.
(powerpc*-*-winnt* | powerpc*-*-pe*, powerpcle-*-solaris*,
powerpc-*-beos*, m68k-apollo-*, mips*-*-irix5*, mips*-*-bsd*):
Don't disable libgcj.
(romp-*-*): Remove case.
(sparclite-*-*, sparc-*-sunos4*): Don't disable libgcj.
(sparc-*-solaris2.[[0-6]] | sparc-*-solaris2.[[0-6]].*): Remove
case.
(v810-*-*): Don't disable GCC libraries.
(v850*-*-*, vax-*-vms, xtensa*-*-*): Remove cases.
(ip2k-*-*): Don't disable GCC libraries.
* configure: Regenerate.
From-SVN: r171826
2011-04-01 13:57:09 +02:00
noconfigdirs="$noconfigdirs gdb"
2003-06-23 02:42:54 +02:00
;;
2000-07-22 10:08:22 +02:00
ia64*-*-elf*)
# No gdb support yet.
2011-03-25 14:06:37 +01:00
noconfigdirs="$noconfigdirs readline libgui itcl gdb"
2000-07-22 10:08:22 +02:00
;;
i2002-04-11 DJ Delorie <dj@redhat.com>
* Makefile.in, configure.in: Sync with binutils, entries
follow...
2002-02-01 Mo DeJong <supermo@bayarea.net>
* Makefile.in: Add all-tix to deps for all-snavigator
so that tix is built when building snavigator.
2002-01-11 Steve Ellcey <sje@cup.hp.com>
* configure.in (ia64*-*-hpux*): New target for IA64 HP-UX,
ld and gdb are not supported.
2002-01-07 Mark Salter <msalter@redhat.com>
* configure.in: Remove target-bsp and target-cygmon from arm builds.
Allow target-libgloss to be built for arm, strongarm, and xscale.
2001-12-13 Thomas Fitzsimmons <fitzsim@redhat.com>
* configure.in (FLAGS_FOR_TARGET): Remove -nostdinc and -isystem
options for i[3456]86-pc-linux* native builds.
2001-11-20 Nick Clifton <nickc@cambridge.redhat.com>
* Makefile.in (do-proto-toplev): Use msgfmt to generate .gmo
files from .po files for a distribution.
2001-09-03 Jeff Holcomb <jeffh@redhat.com>
* configure.in: Enable libstdc++-v3 for h8300 targets.
2001-06-19 Alan Modra <amodra@bigpond.net.au>
* Makefile.in (VER): If AM_INIT_AUTOMAKE uses BFD_VERSION, get
version from bfd/.
Fri Jun 8 11:14:02 2001 Andrew Cagney <cagney@b1.cygnus.com>
* Makefile.in (VER): When present, extract the version number from
the file version.in.
2001-05-24 Tom Rix <trix@redhat.com>
* configure.in : enable ld for aix
2001-02-09 Martin Schwidefsky <schwidefsky@de.ibm.com>
* mh-s390pic: New file.
* mt-s390pic: New file.
2001-02-09 Martin Schwidefsky <schwidefsky@de.ibm.com>
* config.guess: Add linux target for S/390.
2000-11-07 Philip Blundell <pb@futuretv.com>
* Makefile.in (ETC_SUPPORT): Also add configbuild.* and configdev.*.
2000-11-03 Philip Blundell <pb@futuretv.com>
* Makefile.in (ETC_SUPPORT): Add configure.texi and associated info
files.
2001-01-15 Ben Elliston <bje@redhat.com>
* configure.in (host_tools): Add sid.
Always configure cgen.
2000-11-24 Nick Clifton <nickc@redhat.com>
* configure.in (c4x, c5x, tic54x): Move after ARM targets.
2000-08-20 Doug Evans <dje@casey.transmeta.com>
* Makefile.in (ALL_MODULES): Add all-cgen.
(CROSS_CHECK_MODULES,INSTALL_MODULES,CLEAN_MODULES): Similarily.
(all-cgen): New target.
(all-opcodes,all-sim): Depend on all-cgen.
* configure.in (host_tools): Add cgen.
Only configure cgen if --enable-cgen-maint.
From-SVN: r52179
2002-04-11 23:23:35 +02:00
ia64*-**-hpux*)
2011-01-13 19:05:35 +01:00
# No ld support yet.
2015-07-14 17:22:24 +02:00
noconfigdirs="$noconfigdirs gdb libgui itcl ld"
i2002-04-11 DJ Delorie <dj@redhat.com>
* Makefile.in, configure.in: Sync with binutils, entries
follow...
2002-02-01 Mo DeJong <supermo@bayarea.net>
* Makefile.in: Add all-tix to deps for all-snavigator
so that tix is built when building snavigator.
2002-01-11 Steve Ellcey <sje@cup.hp.com>
* configure.in (ia64*-*-hpux*): New target for IA64 HP-UX,
ld and gdb are not supported.
2002-01-07 Mark Salter <msalter@redhat.com>
* configure.in: Remove target-bsp and target-cygmon from arm builds.
Allow target-libgloss to be built for arm, strongarm, and xscale.
2001-12-13 Thomas Fitzsimmons <fitzsim@redhat.com>
* configure.in (FLAGS_FOR_TARGET): Remove -nostdinc and -isystem
options for i[3456]86-pc-linux* native builds.
2001-11-20 Nick Clifton <nickc@cambridge.redhat.com>
* Makefile.in (do-proto-toplev): Use msgfmt to generate .gmo
files from .po files for a distribution.
2001-09-03 Jeff Holcomb <jeffh@redhat.com>
* configure.in: Enable libstdc++-v3 for h8300 targets.
2001-06-19 Alan Modra <amodra@bigpond.net.au>
* Makefile.in (VER): If AM_INIT_AUTOMAKE uses BFD_VERSION, get
version from bfd/.
Fri Jun 8 11:14:02 2001 Andrew Cagney <cagney@b1.cygnus.com>
* Makefile.in (VER): When present, extract the version number from
the file version.in.
2001-05-24 Tom Rix <trix@redhat.com>
* configure.in : enable ld for aix
2001-02-09 Martin Schwidefsky <schwidefsky@de.ibm.com>
* mh-s390pic: New file.
* mt-s390pic: New file.
2001-02-09 Martin Schwidefsky <schwidefsky@de.ibm.com>
* config.guess: Add linux target for S/390.
2000-11-07 Philip Blundell <pb@futuretv.com>
* Makefile.in (ETC_SUPPORT): Also add configbuild.* and configdev.*.
2000-11-03 Philip Blundell <pb@futuretv.com>
* Makefile.in (ETC_SUPPORT): Add configure.texi and associated info
files.
2001-01-15 Ben Elliston <bje@redhat.com>
* configure.in (host_tools): Add sid.
Always configure cgen.
2000-11-24 Nick Clifton <nickc@redhat.com>
* configure.in (c4x, c5x, tic54x): Move after ARM targets.
2000-08-20 Doug Evans <dje@casey.transmeta.com>
* Makefile.in (ALL_MODULES): Add all-cgen.
(CROSS_CHECK_MODULES,INSTALL_MODULES,CLEAN_MODULES): Similarily.
(all-cgen): New target.
(all-opcodes,all-sim): Depend on all-cgen.
* configure.in (host_tools): Add cgen.
Only configure cgen if --enable-cgen-maint.
From-SVN: r52179
2002-04-11 23:23:35 +02:00
;;
2009-01-15 14:14:16 +01:00
ia64*-*-*vms*)
2012-03-05 12:56:29 +01:00
# No ld support yet.
noconfigdirs="$noconfigdirs libgui itcl ld"
2009-01-15 14:14:16 +01:00
;;
2009-10-30 17:47:40 +01:00
i[[3456789]]86-w64-mingw*)
;;
i[[3456789]]86-*-mingw*)
2006-08-30 15:48:49 +02:00
target_configdirs="$target_configdirs target-winsup"
2009-11-06 11:16:30 +01:00
;;
2000-07-22 10:08:22 +02:00
*-*-cygwin*)
target_configdirs="$target_configdirs target-libtermcap target-winsup"
2011-03-25 14:06:37 +01:00
noconfigdirs="$noconfigdirs target-libgloss"
2004-06-17 21:54:25 +02:00
# always build newlib if winsup directory is present.
2006-08-30 15:48:49 +02:00
if test -d "$srcdir/winsup/cygwin"; then
2004-06-17 21:54:25 +02:00
skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'`
2004-10-13 00:49:34 +02:00
elif test -d "$srcdir/newlib"; then
2006-08-30 15:48:49 +02:00
echo "Warning: winsup/cygwin is missing so newlib can't be built."
2004-06-17 21:54:25 +02:00
fi
2009-11-06 11:16:30 +01:00
;;
2003-05-19 20:10:21 +02:00
i[[3456789]]86-*-pe)
MAINTAINERS (crx port, [...]): Remove.
* MAINTAINERS (crx port, m68hc11 port): Remove. Move maintainers
to Write After Approval.
* config-ml.in: Don't handle arc-*-elf*.
* configure.ac (arc-*-*, crx-*-*, i[[3456789]]86-*-pe,
m68hc11-*-*|m6811-*-*|m68hc12-*-*|m6812-*-*, mcore-*-pe*): Don't
handle GCC libraries.
* configure: Regenerate.
contrib:
* compare-all-tests (all_targets): Remove crx and m68hc11.
fixincludes:
* mkfixinc.sh: Don't handle i?86-moss-msdos* or i?86-*-pe.
gcc:
* config/alpha/gnu.h: Remove.
* config/arc: Remove directory.
* config/arm/netbsd.h: Remove.
* config/arm/t-pe: Remove.
* config/crx: Remove directory.
* config/i386/netbsd.h: Remove.
* config/m68hc11: Remove directory.
* config/m68k/uclinux-oldabi.h: Remove.
* config/mcore/mcore-pe.h: Remove.
* config/mcore/t-mcore-pe: Remove.
* config/netbsd-aout.h: Remove.
* config/rs6000/gnu.h: Remove.
* config/sh/sh-symbian.h: Remove.
* config/sh/symbian-base.c: Remove.
* config/sh/symbian-c.c: Remove.
* config/sh/symbian-cxx.c: Remove.
* config/sh/symbian-post.h: Remove.
* config/sh/symbian-pre.h: Remove.
* config/sh/t-symbian: Remove.
* config/svr3.h: Remove.
* config/vax/netbsd.h: Remove.
* config.build: Don't handle i[34567]86-*-pe.
* config.gcc: Remove handling of deprecations for most deprecated
targets.
(m68k-*-uclinuxoldabi*): Add to second deprecated list.
(alpha*-*-gnu*, arc-*-elf*, arm*-*-netbsd*, arm-*-pe*, crx-*-elf,
i[34567]86-*-netbsd*, i[34567]86-*-pe, m68hc11-*-*|m6811-*-*,
m68hc12-*-*|m6812-*-*, m68k-*-uclinuxoldabi*, mcore-*-pe*,
powerpc64-*-gnu*, powerpc-*-gnu-gnualtivec*, powerpc-*-gnu*,
sh-*-symbianelf* | sh[12346l]*-*-symbianelf*, vax-*-netbsd*):
Remove cases.
* config.host: Don't handle i[34567]86-*-pe.
* config/rs6000/linux64.h (LINK_OS_GNU_SPEC): Remove.
(ASM_SPEC32): Don't handle -mcall-gnu.
* config/rs6000/sysv4.h (SUBTARGET_OVERRIDE_OPTIONS): Don't handle
-mcall-gnu.
(ASM_SPEC, CC1_SPEC, LINK_START_SPEC, LINK_OS_SPEC, CPP_SPEC,
STARTFILE_SPEC, LIB_SPEC, ENDFILE_SPEC): Don't handle -mcall-gnu.
(LIB_GNU_SPEC, STARTFILE_GNU_SPEC, ENDFILE_GNU_SPEC,
LINK_START_GNU_SPEC, LINK_OS_GNU_SPEC, CPP_OS_GNU_SPEC): Remove.
(SUBTARGET_EXTRA_SPECS): Remove *_gnu specs.
* config/sh/sh-protos.h, config/sh/sh.c: Remove all code
conditional on SYMBIAN.
* configure.ac: Don't handle powerpc*-*-gnu*.
* configure: Regenerate.
* doc/extend.texi (interrupt attribute): Don't mention CRX.
* doc/install-old.texi (m6811, m6812): Don't mention.
* doc/install.texi (arc-*-elf*): Don't document multilib option.
(arc-*-elf, CRX, m6811-elf, m6812-elf): Remove.
(m68k-uclinuxoldabi): Don't mention.
* doc/invoke.texi (ARC Options, CRX Options, M68hc1x Options):
Remove.
(-mcall-gnu): Remove.
* doc/md.texi (CRX Architecture, Motorola 68HC11 & 68HC12
families): Remove constraint documentation.
gcc/testsuite:
* gcc.c-torture/execute/920501-8.x: Remove.
* gcc.c-torture/execute/930513-1.x: Remove.
* gcc.c-torture/execute/960312-1.x: Remove.
* gcc.c-torture/compile/20000804-1.c,
gcc.c-torture/compile/20001205-1.c,
gcc.c-torture/compile/20001226-1.c,
gcc.c-torture/compile/20010518-2.c,
gcc.c-torture/compile/20020312-1.c,
gcc.c-torture/compile/20020604-1.c,
gcc.c-torture/compile/920501-12.c,
gcc.c-torture/compile/920501-4.c,
gcc.c-torture/compile/920520-1.c,
gcc.c-torture/compile/980506-1.c,
gcc.c-torture/execute/980709-1.x,
gcc.c-torture/execute/990826-0.x: Don't XFAIL or use special
options for m68hc11.
* gcc.dg/cpp/assert4.c: Don't handle ARC.
* gcc.dg/sibcall-3.c, gcc.dg/sibcall-4.c: Don't XFAIL for arc or
m68hc11.
libgcc:
* config.host (alpha*-*-gnu*, arc-*-elf*, arm*-*-netbsd*,
arm-*-pe*, crx-*-elf, i[34567]86-*-netbsd*, i[34567]86-*-pe,
m68hc11-*-*|m6811-*-*, m68hc12-*-*|m6812-*-*, mcore-*-pe*,
powerpc64-*-gnu*, powerpc-*-gnu-gnualtivec*, powerpc-*-gnu*,
sh-*-symbianelf* | sh[12346l]*-*-symbianelf*, vax-*-netbsd*):
Remove cases.
libstdc++-v3:
* configure.ac: Don't handle powerpc*-*-gnu*.
* configure: Regenerate.
From-SVN: r171302
2011-03-22 20:58:18 +01:00
noconfigdirs="$noconfigdirs target-libgloss"
1997-08-22 00:57:35 +02:00
;;
2003-05-19 20:10:21 +02:00
i[[3456789]]86-*-sco3.2v5*)
1997-08-22 00:57:35 +02:00
# The linker does not yet know about weak symbols in COFF,
# and is not configured to handle mixed ELF and COFF.
configure.ac (*-*-chorusos): Don't disable libgcj.
* configure.ac (*-*-chorusos): Don't disable libgcj.
(*-*-freebsd[[12]] | *-*-freebsd[[12]].* | *-*-freebsd*aout*):
Remove case.
(*-*-kaos*): Don't disable GCC libraries, zlib or fastjar.
(arm-*-coff): Don't disable libgcj.
(arm*-*-linux-gnueabi): Remove useless assignment.
(arm-*-riscix*): Don't disable libgcj.
(bfin-*-*): Don't enable target-bsp and target-cygmon depending on
configuration.
(c4x-*-* | tic4x-*-*): Don't disable GCC libraries.
(c54x*-*-*): Remove case.
(tic54x-*-*): Don't disable GCC or GCC libraries.
(cris-*-* | crisv32-*-*): Don't handle *-*-aout. Change *-*-elf
to *.
(d10v-*-*): Don't disable GCC libraries.
(d30v-*-*): Don't disable libgcj.
(h8500-*-*): Don't disable GCC libraries.
(i960-*-*): Don't disable libgcj.
(i[[3456789]]86-*-linux*): Don't handle *-*-*libc1*.
(i[[3456789]]86-*-sco3.2v5*, i[[3456789]]86-*-sco*,
i[[3456789]]86-*-sysv4*, i[[3456789]]86-*-beos*): Don't disable
libgcj.
(m68k-*-coff*): Remove case.
(mmix-*-*): Don't disable libgloss on host.
(mn10200-*-*, mn10300-*-*): Remove cases.
(powerpc*-*-winnt* | powerpc*-*-pe*, powerpcle-*-solaris*,
powerpc-*-beos*, m68k-apollo-*, mips*-*-irix5*, mips*-*-bsd*):
Don't disable libgcj.
(romp-*-*): Remove case.
(sparclite-*-*, sparc-*-sunos4*): Don't disable libgcj.
(sparc-*-solaris2.[[0-6]] | sparc-*-solaris2.[[0-6]].*): Remove
case.
(v810-*-*): Don't disable GCC libraries.
(v850*-*-*, vax-*-vms, xtensa*-*-*): Remove cases.
(ip2k-*-*): Don't disable GCC libraries.
* configure: Regenerate.
From-SVN: r171826
2011-04-01 13:57:09 +02:00
noconfigdirs="$noconfigdirs ld target-libgloss"
1997-08-22 00:57:35 +02:00
;;
2003-05-19 20:10:21 +02:00
i[[3456789]]86-*-sco*)
configure.ac (*-*-chorusos): Don't disable libgcj.
* configure.ac (*-*-chorusos): Don't disable libgcj.
(*-*-freebsd[[12]] | *-*-freebsd[[12]].* | *-*-freebsd*aout*):
Remove case.
(*-*-kaos*): Don't disable GCC libraries, zlib or fastjar.
(arm-*-coff): Don't disable libgcj.
(arm*-*-linux-gnueabi): Remove useless assignment.
(arm-*-riscix*): Don't disable libgcj.
(bfin-*-*): Don't enable target-bsp and target-cygmon depending on
configuration.
(c4x-*-* | tic4x-*-*): Don't disable GCC libraries.
(c54x*-*-*): Remove case.
(tic54x-*-*): Don't disable GCC or GCC libraries.
(cris-*-* | crisv32-*-*): Don't handle *-*-aout. Change *-*-elf
to *.
(d10v-*-*): Don't disable GCC libraries.
(d30v-*-*): Don't disable libgcj.
(h8500-*-*): Don't disable GCC libraries.
(i960-*-*): Don't disable libgcj.
(i[[3456789]]86-*-linux*): Don't handle *-*-*libc1*.
(i[[3456789]]86-*-sco3.2v5*, i[[3456789]]86-*-sco*,
i[[3456789]]86-*-sysv4*, i[[3456789]]86-*-beos*): Don't disable
libgcj.
(m68k-*-coff*): Remove case.
(mmix-*-*): Don't disable libgloss on host.
(mn10200-*-*, mn10300-*-*): Remove cases.
(powerpc*-*-winnt* | powerpc*-*-pe*, powerpcle-*-solaris*,
powerpc-*-beos*, m68k-apollo-*, mips*-*-irix5*, mips*-*-bsd*):
Don't disable libgcj.
(romp-*-*): Remove case.
(sparclite-*-*, sparc-*-sunos4*): Don't disable libgcj.
(sparc-*-solaris2.[[0-6]] | sparc-*-solaris2.[[0-6]].*): Remove
case.
(v810-*-*): Don't disable GCC libraries.
(v850*-*-*, vax-*-vms, xtensa*-*-*): Remove cases.
(ip2k-*-*): Don't disable GCC libraries.
* configure: Regenerate.
From-SVN: r171826
2011-04-01 13:57:09 +02:00
noconfigdirs="$noconfigdirs gprof target-libgloss"
1997-08-22 00:57:35 +02:00
;;
2011-07-07 11:24:16 +02:00
i[[3456789]]86-*-solaris2* | x86_64-*-solaris2.1[[0-9]]*)
2001-01-23 23:17:31 +01:00
noconfigdirs="$noconfigdirs target-libgloss"
1997-08-22 00:57:35 +02:00
;;
2003-05-19 20:10:21 +02:00
i[[3456789]]86-*-sysv4*)
configure.ac (*-*-chorusos): Don't disable libgcj.
* configure.ac (*-*-chorusos): Don't disable libgcj.
(*-*-freebsd[[12]] | *-*-freebsd[[12]].* | *-*-freebsd*aout*):
Remove case.
(*-*-kaos*): Don't disable GCC libraries, zlib or fastjar.
(arm-*-coff): Don't disable libgcj.
(arm*-*-linux-gnueabi): Remove useless assignment.
(arm-*-riscix*): Don't disable libgcj.
(bfin-*-*): Don't enable target-bsp and target-cygmon depending on
configuration.
(c4x-*-* | tic4x-*-*): Don't disable GCC libraries.
(c54x*-*-*): Remove case.
(tic54x-*-*): Don't disable GCC or GCC libraries.
(cris-*-* | crisv32-*-*): Don't handle *-*-aout. Change *-*-elf
to *.
(d10v-*-*): Don't disable GCC libraries.
(d30v-*-*): Don't disable libgcj.
(h8500-*-*): Don't disable GCC libraries.
(i960-*-*): Don't disable libgcj.
(i[[3456789]]86-*-linux*): Don't handle *-*-*libc1*.
(i[[3456789]]86-*-sco3.2v5*, i[[3456789]]86-*-sco*,
i[[3456789]]86-*-sysv4*, i[[3456789]]86-*-beos*): Don't disable
libgcj.
(m68k-*-coff*): Remove case.
(mmix-*-*): Don't disable libgloss on host.
(mn10200-*-*, mn10300-*-*): Remove cases.
(powerpc*-*-winnt* | powerpc*-*-pe*, powerpcle-*-solaris*,
powerpc-*-beos*, m68k-apollo-*, mips*-*-irix5*, mips*-*-bsd*):
Don't disable libgcj.
(romp-*-*): Remove case.
(sparclite-*-*, sparc-*-sunos4*): Don't disable libgcj.
(sparc-*-solaris2.[[0-6]] | sparc-*-solaris2.[[0-6]].*): Remove
case.
(v810-*-*): Don't disable GCC libraries.
(v850*-*-*, vax-*-vms, xtensa*-*-*): Remove cases.
(ip2k-*-*): Don't disable GCC libraries.
* configure: Regenerate.
From-SVN: r171826
2011-04-01 13:57:09 +02:00
noconfigdirs="$noconfigdirs target-libgloss"
1997-08-22 00:57:35 +02:00
;;
2003-05-19 20:10:21 +02:00
i[[3456789]]86-*-beos*)
* configure.ac (alpha*-dec-osf*, i[[3456789]]86-*-rdos*,
sh*-*-pe|mips*-*-pe|arm-wince-pe, sparc-*-sunos4*, *-*-aix*,
*-*-beos*, *-*-chorusos, *-*-dragonfly*, *-*-freebsd*, *-*-linux*
| *-*-gnu* | *-*-k*bsd*-gnu | *-*-kopensolaris*-gnu, *-*-lynxos*,
*-*-mingw*, *-*-netbsd*, *-*-netware*, *-*-tpf*, *-*-uclinux*,
*-*-vxworks*): Disable newlib and libgloss in separate case
statement.
(i[[3456789]]86-*-linux*): Move logic allowing newlib to be built
to separate case statement.
(*-*-chorusos, *-*-dragonfly*, *-*-freebsd*, *-*-netbsd*,
*-*-netware*, *-*-tpf*, *-*-uclinux*, *-*-vxworks*,
alpha*-dec-osf*, alpha*-*-linux*, am33_2.0-*-linux*, sh-*-linux*,
sh*-*-pe|mips*-*-pe|*arm-wince-pe, arm-*-coff, arm-*-elf* |
arm*-*-eabi*, arm*-*-linux-gnueabi, arm*-*-symbianelf*, avr-*-*,
bfin-*-*, cris-*-* | crisv32-*-*, frv-*-*, i[[3456789]]86-*-coff |
i[[3456789]]86-*-elf, i[[3456789]]86-w64-mingw*,
i[[3456789]]86-*-mingw*, x86_64-*-mingw*,
i[[3456789]]86-*-interix*, i[[3456789]]86-*-beos*,
i[[3456789]]86-*-rdos*, m32r-*-*,
m68hc11-*-*|m6811-*-*|m68hc12-*-*|m6812-*-*, m68k-*-elf*, m68*-*-*
| fido-*-*, powerpc-*-aix*, powerpc-*-beos*, powerpc-*-eabi,
powerpc-*-eabi* | powerpcle-*-eabi* | powerpc-*-rtems*,
rs6000-*-lynxos*, rs6000-*-aix*, mips*-*-linux*, sparclet-*-aout*
| sparc86x-*-*, sparc-*-elf*, sparc64-*-elf*, sparclite-*-*,
sparc-*-sunos4*, sparc-*-solaris* | sparc64-*-solaris* |
sparcv9-*-solaris*, *-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu |
*-*-kopensolaris*-gnu, *-*-lynxos*, *-*-*): Don't disable newlib
and libgloss in main case over targets. Remove most empty cases
in main case over targets.
* configure: Regenerate.
From-SVN: r173430
2011-05-05 14:38:18 +02:00
noconfigdirs="$noconfigdirs gdb"
2003-03-05 02:45:09 +01:00
;;
2006-02-14 10:36:24 +01:00
i[[3456789]]86-*-rdos*)
* configure.ac (alpha*-dec-osf*, i[[3456789]]86-*-rdos*,
sh*-*-pe|mips*-*-pe|arm-wince-pe, sparc-*-sunos4*, *-*-aix*,
*-*-beos*, *-*-chorusos, *-*-dragonfly*, *-*-freebsd*, *-*-linux*
| *-*-gnu* | *-*-k*bsd*-gnu | *-*-kopensolaris*-gnu, *-*-lynxos*,
*-*-mingw*, *-*-netbsd*, *-*-netware*, *-*-tpf*, *-*-uclinux*,
*-*-vxworks*): Disable newlib and libgloss in separate case
statement.
(i[[3456789]]86-*-linux*): Move logic allowing newlib to be built
to separate case statement.
(*-*-chorusos, *-*-dragonfly*, *-*-freebsd*, *-*-netbsd*,
*-*-netware*, *-*-tpf*, *-*-uclinux*, *-*-vxworks*,
alpha*-dec-osf*, alpha*-*-linux*, am33_2.0-*-linux*, sh-*-linux*,
sh*-*-pe|mips*-*-pe|*arm-wince-pe, arm-*-coff, arm-*-elf* |
arm*-*-eabi*, arm*-*-linux-gnueabi, arm*-*-symbianelf*, avr-*-*,
bfin-*-*, cris-*-* | crisv32-*-*, frv-*-*, i[[3456789]]86-*-coff |
i[[3456789]]86-*-elf, i[[3456789]]86-w64-mingw*,
i[[3456789]]86-*-mingw*, x86_64-*-mingw*,
i[[3456789]]86-*-interix*, i[[3456789]]86-*-beos*,
i[[3456789]]86-*-rdos*, m32r-*-*,
m68hc11-*-*|m6811-*-*|m68hc12-*-*|m6812-*-*, m68k-*-elf*, m68*-*-*
| fido-*-*, powerpc-*-aix*, powerpc-*-beos*, powerpc-*-eabi,
powerpc-*-eabi* | powerpcle-*-eabi* | powerpc-*-rtems*,
rs6000-*-lynxos*, rs6000-*-aix*, mips*-*-linux*, sparclet-*-aout*
| sparc86x-*-*, sparc-*-elf*, sparc64-*-elf*, sparclite-*-*,
sparc-*-sunos4*, sparc-*-solaris* | sparc64-*-solaris* |
sparcv9-*-solaris*, *-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu |
*-*-kopensolaris*-gnu, *-*-lynxos*, *-*-*): Don't disable newlib
and libgloss in main case over targets. Remove most empty cases
in main case over targets.
* configure: Regenerate.
From-SVN: r173430
2011-05-05 14:38:18 +02:00
noconfigdirs="$noconfigdirs gdb"
2007-09-10 16:20:10 +02:00
;;
2001-11-03 23:00:58 +01:00
mmix-*-*)
2011-04-28 15:23:08 +02:00
noconfigdirs="$noconfigdirs gdb"
2001-11-03 23:00:58 +01:00
;;
2005-12-16 12:52:02 +01:00
mt-*-*)
2005-06-02 21:54:19 +02:00
noconfigdirs="$noconfigdirs sim"
;;
1997-08-22 00:57:35 +02:00
powerpc-*-aix*)
# copied from rs6000-*-* entry
* configure.ac (alpha*-dec-osf*, i[[3456789]]86-*-rdos*,
sh*-*-pe|mips*-*-pe|arm-wince-pe, sparc-*-sunos4*, *-*-aix*,
*-*-beos*, *-*-chorusos, *-*-dragonfly*, *-*-freebsd*, *-*-linux*
| *-*-gnu* | *-*-k*bsd*-gnu | *-*-kopensolaris*-gnu, *-*-lynxos*,
*-*-mingw*, *-*-netbsd*, *-*-netware*, *-*-tpf*, *-*-uclinux*,
*-*-vxworks*): Disable newlib and libgloss in separate case
statement.
(i[[3456789]]86-*-linux*): Move logic allowing newlib to be built
to separate case statement.
(*-*-chorusos, *-*-dragonfly*, *-*-freebsd*, *-*-netbsd*,
*-*-netware*, *-*-tpf*, *-*-uclinux*, *-*-vxworks*,
alpha*-dec-osf*, alpha*-*-linux*, am33_2.0-*-linux*, sh-*-linux*,
sh*-*-pe|mips*-*-pe|*arm-wince-pe, arm-*-coff, arm-*-elf* |
arm*-*-eabi*, arm*-*-linux-gnueabi, arm*-*-symbianelf*, avr-*-*,
bfin-*-*, cris-*-* | crisv32-*-*, frv-*-*, i[[3456789]]86-*-coff |
i[[3456789]]86-*-elf, i[[3456789]]86-w64-mingw*,
i[[3456789]]86-*-mingw*, x86_64-*-mingw*,
i[[3456789]]86-*-interix*, i[[3456789]]86-*-beos*,
i[[3456789]]86-*-rdos*, m32r-*-*,
m68hc11-*-*|m6811-*-*|m68hc12-*-*|m6812-*-*, m68k-*-elf*, m68*-*-*
| fido-*-*, powerpc-*-aix*, powerpc-*-beos*, powerpc-*-eabi,
powerpc-*-eabi* | powerpcle-*-eabi* | powerpc-*-rtems*,
rs6000-*-lynxos*, rs6000-*-aix*, mips*-*-linux*, sparclet-*-aout*
| sparc86x-*-*, sparc-*-elf*, sparc64-*-elf*, sparclite-*-*,
sparc-*-sunos4*, sparc-*-solaris* | sparc64-*-solaris* |
sparcv9-*-solaris*, *-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu |
*-*-kopensolaris*-gnu, *-*-lynxos*, *-*-*): Don't disable newlib
and libgloss in main case over targets. Remove most empty cases
in main case over targets.
* configure: Regenerate.
From-SVN: r173430
2011-05-05 14:38:18 +02:00
noconfigdirs="$noconfigdirs gprof"
1997-08-22 00:57:35 +02:00
;;
2011-03-24 14:24:31 +01:00
powerpc*-*-winnt* | powerpc*-*-pe*)
1997-08-22 00:57:35 +02:00
target_configdirs="$target_configdirs target-winsup"
configure.ac (*-*-chorusos): Don't disable libgcj.
* configure.ac (*-*-chorusos): Don't disable libgcj.
(*-*-freebsd[[12]] | *-*-freebsd[[12]].* | *-*-freebsd*aout*):
Remove case.
(*-*-kaos*): Don't disable GCC libraries, zlib or fastjar.
(arm-*-coff): Don't disable libgcj.
(arm*-*-linux-gnueabi): Remove useless assignment.
(arm-*-riscix*): Don't disable libgcj.
(bfin-*-*): Don't enable target-bsp and target-cygmon depending on
configuration.
(c4x-*-* | tic4x-*-*): Don't disable GCC libraries.
(c54x*-*-*): Remove case.
(tic54x-*-*): Don't disable GCC or GCC libraries.
(cris-*-* | crisv32-*-*): Don't handle *-*-aout. Change *-*-elf
to *.
(d10v-*-*): Don't disable GCC libraries.
(d30v-*-*): Don't disable libgcj.
(h8500-*-*): Don't disable GCC libraries.
(i960-*-*): Don't disable libgcj.
(i[[3456789]]86-*-linux*): Don't handle *-*-*libc1*.
(i[[3456789]]86-*-sco3.2v5*, i[[3456789]]86-*-sco*,
i[[3456789]]86-*-sysv4*, i[[3456789]]86-*-beos*): Don't disable
libgcj.
(m68k-*-coff*): Remove case.
(mmix-*-*): Don't disable libgloss on host.
(mn10200-*-*, mn10300-*-*): Remove cases.
(powerpc*-*-winnt* | powerpc*-*-pe*, powerpcle-*-solaris*,
powerpc-*-beos*, m68k-apollo-*, mips*-*-irix5*, mips*-*-bsd*):
Don't disable libgcj.
(romp-*-*): Remove case.
(sparclite-*-*, sparc-*-sunos4*): Don't disable libgcj.
(sparc-*-solaris2.[[0-6]] | sparc-*-solaris2.[[0-6]].*): Remove
case.
(v810-*-*): Don't disable GCC libraries.
(v850*-*-*, vax-*-vms, xtensa*-*-*): Remove cases.
(ip2k-*-*): Don't disable GCC libraries.
* configure: Regenerate.
From-SVN: r171826
2011-04-01 13:57:09 +02:00
noconfigdirs="$noconfigdirs gdb tcl tk target-libgloss itcl"
1997-08-22 00:57:35 +02:00
# always build newlib.
skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'`
;;
# This is temporary until we can link against shared libraries
powerpcle-*-solaris*)
configure.ac (*-*-chorusos): Don't disable libgcj.
* configure.ac (*-*-chorusos): Don't disable libgcj.
(*-*-freebsd[[12]] | *-*-freebsd[[12]].* | *-*-freebsd*aout*):
Remove case.
(*-*-kaos*): Don't disable GCC libraries, zlib or fastjar.
(arm-*-coff): Don't disable libgcj.
(arm*-*-linux-gnueabi): Remove useless assignment.
(arm-*-riscix*): Don't disable libgcj.
(bfin-*-*): Don't enable target-bsp and target-cygmon depending on
configuration.
(c4x-*-* | tic4x-*-*): Don't disable GCC libraries.
(c54x*-*-*): Remove case.
(tic54x-*-*): Don't disable GCC or GCC libraries.
(cris-*-* | crisv32-*-*): Don't handle *-*-aout. Change *-*-elf
to *.
(d10v-*-*): Don't disable GCC libraries.
(d30v-*-*): Don't disable libgcj.
(h8500-*-*): Don't disable GCC libraries.
(i960-*-*): Don't disable libgcj.
(i[[3456789]]86-*-linux*): Don't handle *-*-*libc1*.
(i[[3456789]]86-*-sco3.2v5*, i[[3456789]]86-*-sco*,
i[[3456789]]86-*-sysv4*, i[[3456789]]86-*-beos*): Don't disable
libgcj.
(m68k-*-coff*): Remove case.
(mmix-*-*): Don't disable libgloss on host.
(mn10200-*-*, mn10300-*-*): Remove cases.
(powerpc*-*-winnt* | powerpc*-*-pe*, powerpcle-*-solaris*,
powerpc-*-beos*, m68k-apollo-*, mips*-*-irix5*, mips*-*-bsd*):
Don't disable libgcj.
(romp-*-*): Remove case.
(sparclite-*-*, sparc-*-sunos4*): Don't disable libgcj.
(sparc-*-solaris2.[[0-6]] | sparc-*-solaris2.[[0-6]].*): Remove
case.
(v810-*-*): Don't disable GCC libraries.
(v850*-*-*, vax-*-vms, xtensa*-*-*): Remove cases.
(ip2k-*-*): Don't disable GCC libraries.
* configure: Regenerate.
From-SVN: r171826
2011-04-01 13:57:09 +02:00
noconfigdirs="$noconfigdirs gdb sim tcl tk itcl"
1997-08-22 00:57:35 +02:00
;;
2000-01-13 01:47:44 +01:00
powerpc-*-beos*)
* configure.ac (alpha*-dec-osf*, i[[3456789]]86-*-rdos*,
sh*-*-pe|mips*-*-pe|arm-wince-pe, sparc-*-sunos4*, *-*-aix*,
*-*-beos*, *-*-chorusos, *-*-dragonfly*, *-*-freebsd*, *-*-linux*
| *-*-gnu* | *-*-k*bsd*-gnu | *-*-kopensolaris*-gnu, *-*-lynxos*,
*-*-mingw*, *-*-netbsd*, *-*-netware*, *-*-tpf*, *-*-uclinux*,
*-*-vxworks*): Disable newlib and libgloss in separate case
statement.
(i[[3456789]]86-*-linux*): Move logic allowing newlib to be built
to separate case statement.
(*-*-chorusos, *-*-dragonfly*, *-*-freebsd*, *-*-netbsd*,
*-*-netware*, *-*-tpf*, *-*-uclinux*, *-*-vxworks*,
alpha*-dec-osf*, alpha*-*-linux*, am33_2.0-*-linux*, sh-*-linux*,
sh*-*-pe|mips*-*-pe|*arm-wince-pe, arm-*-coff, arm-*-elf* |
arm*-*-eabi*, arm*-*-linux-gnueabi, arm*-*-symbianelf*, avr-*-*,
bfin-*-*, cris-*-* | crisv32-*-*, frv-*-*, i[[3456789]]86-*-coff |
i[[3456789]]86-*-elf, i[[3456789]]86-w64-mingw*,
i[[3456789]]86-*-mingw*, x86_64-*-mingw*,
i[[3456789]]86-*-interix*, i[[3456789]]86-*-beos*,
i[[3456789]]86-*-rdos*, m32r-*-*,
m68hc11-*-*|m6811-*-*|m68hc12-*-*|m6812-*-*, m68k-*-elf*, m68*-*-*
| fido-*-*, powerpc-*-aix*, powerpc-*-beos*, powerpc-*-eabi,
powerpc-*-eabi* | powerpcle-*-eabi* | powerpc-*-rtems*,
rs6000-*-lynxos*, rs6000-*-aix*, mips*-*-linux*, sparclet-*-aout*
| sparc86x-*-*, sparc-*-elf*, sparc64-*-elf*, sparclite-*-*,
sparc-*-sunos4*, sparc-*-solaris* | sparc64-*-solaris* |
sparcv9-*-solaris*, *-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu |
*-*-kopensolaris*-gnu, *-*-lynxos*, *-*-*): Don't disable newlib
and libgloss in main case over targets. Remove most empty cases
in main case over targets.
* configure: Regenerate.
From-SVN: r173430
2011-05-05 14:38:18 +02:00
noconfigdirs="$noconfigdirs gdb"
2000-07-22 10:08:22 +02:00
;;
1997-08-22 00:57:35 +02:00
rs6000-*-lynxos*)
* configure.ac (alpha*-dec-osf*, i[[3456789]]86-*-rdos*,
sh*-*-pe|mips*-*-pe|arm-wince-pe, sparc-*-sunos4*, *-*-aix*,
*-*-beos*, *-*-chorusos, *-*-dragonfly*, *-*-freebsd*, *-*-linux*
| *-*-gnu* | *-*-k*bsd*-gnu | *-*-kopensolaris*-gnu, *-*-lynxos*,
*-*-mingw*, *-*-netbsd*, *-*-netware*, *-*-tpf*, *-*-uclinux*,
*-*-vxworks*): Disable newlib and libgloss in separate case
statement.
(i[[3456789]]86-*-linux*): Move logic allowing newlib to be built
to separate case statement.
(*-*-chorusos, *-*-dragonfly*, *-*-freebsd*, *-*-netbsd*,
*-*-netware*, *-*-tpf*, *-*-uclinux*, *-*-vxworks*,
alpha*-dec-osf*, alpha*-*-linux*, am33_2.0-*-linux*, sh-*-linux*,
sh*-*-pe|mips*-*-pe|*arm-wince-pe, arm-*-coff, arm-*-elf* |
arm*-*-eabi*, arm*-*-linux-gnueabi, arm*-*-symbianelf*, avr-*-*,
bfin-*-*, cris-*-* | crisv32-*-*, frv-*-*, i[[3456789]]86-*-coff |
i[[3456789]]86-*-elf, i[[3456789]]86-w64-mingw*,
i[[3456789]]86-*-mingw*, x86_64-*-mingw*,
i[[3456789]]86-*-interix*, i[[3456789]]86-*-beos*,
i[[3456789]]86-*-rdos*, m32r-*-*,
m68hc11-*-*|m6811-*-*|m68hc12-*-*|m6812-*-*, m68k-*-elf*, m68*-*-*
| fido-*-*, powerpc-*-aix*, powerpc-*-beos*, powerpc-*-eabi,
powerpc-*-eabi* | powerpcle-*-eabi* | powerpc-*-rtems*,
rs6000-*-lynxos*, rs6000-*-aix*, mips*-*-linux*, sparclet-*-aout*
| sparc86x-*-*, sparc-*-elf*, sparc64-*-elf*, sparclite-*-*,
sparc-*-sunos4*, sparc-*-solaris* | sparc64-*-solaris* |
sparcv9-*-solaris*, *-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu |
*-*-kopensolaris*-gnu, *-*-lynxos*, *-*-*): Don't disable newlib
and libgloss in main case over targets. Remove most empty cases
in main case over targets.
* configure: Regenerate.
From-SVN: r173430
2011-05-05 14:38:18 +02:00
noconfigdirs="$noconfigdirs gprof"
1997-08-22 00:57:35 +02:00
;;
rs6000-*-aix*)
* configure.ac (alpha*-dec-osf*, i[[3456789]]86-*-rdos*,
sh*-*-pe|mips*-*-pe|arm-wince-pe, sparc-*-sunos4*, *-*-aix*,
*-*-beos*, *-*-chorusos, *-*-dragonfly*, *-*-freebsd*, *-*-linux*
| *-*-gnu* | *-*-k*bsd*-gnu | *-*-kopensolaris*-gnu, *-*-lynxos*,
*-*-mingw*, *-*-netbsd*, *-*-netware*, *-*-tpf*, *-*-uclinux*,
*-*-vxworks*): Disable newlib and libgloss in separate case
statement.
(i[[3456789]]86-*-linux*): Move logic allowing newlib to be built
to separate case statement.
(*-*-chorusos, *-*-dragonfly*, *-*-freebsd*, *-*-netbsd*,
*-*-netware*, *-*-tpf*, *-*-uclinux*, *-*-vxworks*,
alpha*-dec-osf*, alpha*-*-linux*, am33_2.0-*-linux*, sh-*-linux*,
sh*-*-pe|mips*-*-pe|*arm-wince-pe, arm-*-coff, arm-*-elf* |
arm*-*-eabi*, arm*-*-linux-gnueabi, arm*-*-symbianelf*, avr-*-*,
bfin-*-*, cris-*-* | crisv32-*-*, frv-*-*, i[[3456789]]86-*-coff |
i[[3456789]]86-*-elf, i[[3456789]]86-w64-mingw*,
i[[3456789]]86-*-mingw*, x86_64-*-mingw*,
i[[3456789]]86-*-interix*, i[[3456789]]86-*-beos*,
i[[3456789]]86-*-rdos*, m32r-*-*,
m68hc11-*-*|m6811-*-*|m68hc12-*-*|m6812-*-*, m68k-*-elf*, m68*-*-*
| fido-*-*, powerpc-*-aix*, powerpc-*-beos*, powerpc-*-eabi,
powerpc-*-eabi* | powerpcle-*-eabi* | powerpc-*-rtems*,
rs6000-*-lynxos*, rs6000-*-aix*, mips*-*-linux*, sparclet-*-aout*
| sparc86x-*-*, sparc-*-elf*, sparc64-*-elf*, sparclite-*-*,
sparc-*-sunos4*, sparc-*-solaris* | sparc64-*-solaris* |
sparcv9-*-solaris*, *-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu |
*-*-kopensolaris*-gnu, *-*-lynxos*, *-*-*): Don't disable newlib
and libgloss in main case over targets. Remove most empty cases
in main case over targets.
* configure: Regenerate.
From-SVN: r173430
2011-05-05 14:38:18 +02:00
noconfigdirs="$noconfigdirs gprof"
1997-08-22 00:57:35 +02:00
;;
rs6000-*-*)
2011-04-28 15:23:08 +02:00
noconfigdirs="$noconfigdirs gprof"
1997-08-22 00:57:35 +02:00
;;
m68k-apollo-*)
configure.ac (*-*-chorusos): Don't disable libgcj.
* configure.ac (*-*-chorusos): Don't disable libgcj.
(*-*-freebsd[[12]] | *-*-freebsd[[12]].* | *-*-freebsd*aout*):
Remove case.
(*-*-kaos*): Don't disable GCC libraries, zlib or fastjar.
(arm-*-coff): Don't disable libgcj.
(arm*-*-linux-gnueabi): Remove useless assignment.
(arm-*-riscix*): Don't disable libgcj.
(bfin-*-*): Don't enable target-bsp and target-cygmon depending on
configuration.
(c4x-*-* | tic4x-*-*): Don't disable GCC libraries.
(c54x*-*-*): Remove case.
(tic54x-*-*): Don't disable GCC or GCC libraries.
(cris-*-* | crisv32-*-*): Don't handle *-*-aout. Change *-*-elf
to *.
(d10v-*-*): Don't disable GCC libraries.
(d30v-*-*): Don't disable libgcj.
(h8500-*-*): Don't disable GCC libraries.
(i960-*-*): Don't disable libgcj.
(i[[3456789]]86-*-linux*): Don't handle *-*-*libc1*.
(i[[3456789]]86-*-sco3.2v5*, i[[3456789]]86-*-sco*,
i[[3456789]]86-*-sysv4*, i[[3456789]]86-*-beos*): Don't disable
libgcj.
(m68k-*-coff*): Remove case.
(mmix-*-*): Don't disable libgloss on host.
(mn10200-*-*, mn10300-*-*): Remove cases.
(powerpc*-*-winnt* | powerpc*-*-pe*, powerpcle-*-solaris*,
powerpc-*-beos*, m68k-apollo-*, mips*-*-irix5*, mips*-*-bsd*):
Don't disable libgcj.
(romp-*-*): Remove case.
(sparclite-*-*, sparc-*-sunos4*): Don't disable libgcj.
(sparc-*-solaris2.[[0-6]] | sparc-*-solaris2.[[0-6]].*): Remove
case.
(v810-*-*): Don't disable GCC libraries.
(v850*-*-*, vax-*-vms, xtensa*-*-*): Remove cases.
(ip2k-*-*): Don't disable GCC libraries.
* configure: Regenerate.
From-SVN: r171826
2011-04-01 13:57:09 +02:00
noconfigdirs="$noconfigdirs ld binutils gprof target-libgloss"
1997-08-22 00:57:35 +02:00
;;
2009-08-06 19:48:24 +02:00
microblaze*)
2011-04-28 15:23:08 +02:00
noconfigdirs="$noconfigdirs gprof"
2009-08-06 19:48:24 +02:00
;;
2014-11-26 22:53:04 +01:00
mips*-sde-elf* | mips*-mti-elf* | mips*-img-elf*)
2007-09-14 16:50:26 +02:00
if test x$with_newlib = xyes; then
noconfigdirs="$noconfigdirs gprof"
fi
;;
1997-08-22 00:57:35 +02:00
mips*-*-irix5*)
configure.ac (*-*-chorusos): Don't disable libgcj.
* configure.ac (*-*-chorusos): Don't disable libgcj.
(*-*-freebsd[[12]] | *-*-freebsd[[12]].* | *-*-freebsd*aout*):
Remove case.
(*-*-kaos*): Don't disable GCC libraries, zlib or fastjar.
(arm-*-coff): Don't disable libgcj.
(arm*-*-linux-gnueabi): Remove useless assignment.
(arm-*-riscix*): Don't disable libgcj.
(bfin-*-*): Don't enable target-bsp and target-cygmon depending on
configuration.
(c4x-*-* | tic4x-*-*): Don't disable GCC libraries.
(c54x*-*-*): Remove case.
(tic54x-*-*): Don't disable GCC or GCC libraries.
(cris-*-* | crisv32-*-*): Don't handle *-*-aout. Change *-*-elf
to *.
(d10v-*-*): Don't disable GCC libraries.
(d30v-*-*): Don't disable libgcj.
(h8500-*-*): Don't disable GCC libraries.
(i960-*-*): Don't disable libgcj.
(i[[3456789]]86-*-linux*): Don't handle *-*-*libc1*.
(i[[3456789]]86-*-sco3.2v5*, i[[3456789]]86-*-sco*,
i[[3456789]]86-*-sysv4*, i[[3456789]]86-*-beos*): Don't disable
libgcj.
(m68k-*-coff*): Remove case.
(mmix-*-*): Don't disable libgloss on host.
(mn10200-*-*, mn10300-*-*): Remove cases.
(powerpc*-*-winnt* | powerpc*-*-pe*, powerpcle-*-solaris*,
powerpc-*-beos*, m68k-apollo-*, mips*-*-irix5*, mips*-*-bsd*):
Don't disable libgcj.
(romp-*-*): Remove case.
(sparclite-*-*, sparc-*-sunos4*): Don't disable libgcj.
(sparc-*-solaris2.[[0-6]] | sparc-*-solaris2.[[0-6]].*): Remove
case.
(v810-*-*): Don't disable GCC libraries.
(v850*-*-*, vax-*-vms, xtensa*-*-*): Remove cases.
(ip2k-*-*): Don't disable GCC libraries.
* configure: Regenerate.
From-SVN: r171826
2011-04-01 13:57:09 +02:00
noconfigdirs="$noconfigdirs gprof target-libgloss"
1997-08-22 00:57:35 +02:00
;;
mips*-*-irix6*)
2011-04-28 15:23:08 +02:00
noconfigdirs="$noconfigdirs gprof target-libgloss"
1997-08-22 00:57:35 +02:00
;;
mips*-*-bsd*)
2013-07-16 12:11:36 +02:00
noconfigdirs="$noconfigdirs ld gas gprof target-libgloss"
1997-08-22 00:57:35 +02:00
;;
2002-03-07 20:32:12 +01:00
mips*-*-linux*)
;;
2013-07-16 12:11:36 +02:00
mips*-*-ultrix* | mips*-*-osf* | mips*-*-ecoff* | mips*-*-pe* \
| mips*-*-irix* | mips*-*-lnews* | mips*-*-riscos*)
noconfigdirs="$noconfigdirs ld gas gprof"
;;
1997-08-22 00:57:35 +02:00
mips*-*-*)
2011-04-28 15:23:08 +02:00
noconfigdirs="$noconfigdirs gprof"
1997-08-22 00:57:35 +02:00
;;
2014-11-10 17:12:42 +01:00
nvptx*-*-*)
noconfigdirs="$noconfigdirs target-libssp target-libstdc++-v3 target-libobjc"
;;
2014-11-26 22:53:04 +01:00
or1k*-*-*)
noconfigdirs="$noconfigdirs gdb"
;;
2016-04-30 11:11:03 +02:00
sh-*-*)
2009-07-31 14:51:10 +02:00
case "${target}" in
sh*-*-elf)
2011-04-28 15:23:08 +02:00
;;
2009-07-31 14:51:10 +02:00
*)
2011-04-28 15:23:08 +02:00
noconfigdirs="$noconfigdirs target-libgloss" ;;
2009-07-31 14:51:10 +02:00
esac
1997-08-22 00:57:35 +02:00
;;
sparc-*-sunos4*)
* configure.ac (alpha*-dec-osf*, i[[3456789]]86-*-rdos*,
sh*-*-pe|mips*-*-pe|arm-wince-pe, sparc-*-sunos4*, *-*-aix*,
*-*-beos*, *-*-chorusos, *-*-dragonfly*, *-*-freebsd*, *-*-linux*
| *-*-gnu* | *-*-k*bsd*-gnu | *-*-kopensolaris*-gnu, *-*-lynxos*,
*-*-mingw*, *-*-netbsd*, *-*-netware*, *-*-tpf*, *-*-uclinux*,
*-*-vxworks*): Disable newlib and libgloss in separate case
statement.
(i[[3456789]]86-*-linux*): Move logic allowing newlib to be built
to separate case statement.
(*-*-chorusos, *-*-dragonfly*, *-*-freebsd*, *-*-netbsd*,
*-*-netware*, *-*-tpf*, *-*-uclinux*, *-*-vxworks*,
alpha*-dec-osf*, alpha*-*-linux*, am33_2.0-*-linux*, sh-*-linux*,
sh*-*-pe|mips*-*-pe|*arm-wince-pe, arm-*-coff, arm-*-elf* |
arm*-*-eabi*, arm*-*-linux-gnueabi, arm*-*-symbianelf*, avr-*-*,
bfin-*-*, cris-*-* | crisv32-*-*, frv-*-*, i[[3456789]]86-*-coff |
i[[3456789]]86-*-elf, i[[3456789]]86-w64-mingw*,
i[[3456789]]86-*-mingw*, x86_64-*-mingw*,
i[[3456789]]86-*-interix*, i[[3456789]]86-*-beos*,
i[[3456789]]86-*-rdos*, m32r-*-*,
m68hc11-*-*|m6811-*-*|m68hc12-*-*|m6812-*-*, m68k-*-elf*, m68*-*-*
| fido-*-*, powerpc-*-aix*, powerpc-*-beos*, powerpc-*-eabi,
powerpc-*-eabi* | powerpcle-*-eabi* | powerpc-*-rtems*,
rs6000-*-lynxos*, rs6000-*-aix*, mips*-*-linux*, sparclet-*-aout*
| sparc86x-*-*, sparc-*-elf*, sparc64-*-elf*, sparclite-*-*,
sparc-*-sunos4*, sparc-*-solaris* | sparc64-*-solaris* |
sparcv9-*-solaris*, *-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu |
*-*-kopensolaris*-gnu, *-*-lynxos*, *-*-*): Don't disable newlib
and libgloss in main case over targets. Remove most empty cases
in main case over targets.
* configure: Regenerate.
From-SVN: r173430
2011-05-05 14:38:18 +02:00
if test x${is_cross_compiler} = xno ; then
1997-08-22 00:57:35 +02:00
use_gnu_ld=no
fi
;;
2010-03-23 17:04:30 +01:00
tic6x-*-*)
2011-08-14 14:25:15 +02:00
noconfigdirs="$noconfigdirs sim"
2010-03-23 17:04:30 +01:00
;;
2014-02-24 16:08:00 +01:00
tilepro*-*-* | tilegx*-*-*)
2011-06-13 17:24:21 +02:00
noconfigdirs="$noconfigdirs sim"
;;
1997-08-22 00:57:35 +02:00
v810-*-*)
configure.ac (*-*-chorusos): Don't disable libgcj.
* configure.ac (*-*-chorusos): Don't disable libgcj.
(*-*-freebsd[[12]] | *-*-freebsd[[12]].* | *-*-freebsd*aout*):
Remove case.
(*-*-kaos*): Don't disable GCC libraries, zlib or fastjar.
(arm-*-coff): Don't disable libgcj.
(arm*-*-linux-gnueabi): Remove useless assignment.
(arm-*-riscix*): Don't disable libgcj.
(bfin-*-*): Don't enable target-bsp and target-cygmon depending on
configuration.
(c4x-*-* | tic4x-*-*): Don't disable GCC libraries.
(c54x*-*-*): Remove case.
(tic54x-*-*): Don't disable GCC or GCC libraries.
(cris-*-* | crisv32-*-*): Don't handle *-*-aout. Change *-*-elf
to *.
(d10v-*-*): Don't disable GCC libraries.
(d30v-*-*): Don't disable libgcj.
(h8500-*-*): Don't disable GCC libraries.
(i960-*-*): Don't disable libgcj.
(i[[3456789]]86-*-linux*): Don't handle *-*-*libc1*.
(i[[3456789]]86-*-sco3.2v5*, i[[3456789]]86-*-sco*,
i[[3456789]]86-*-sysv4*, i[[3456789]]86-*-beos*): Don't disable
libgcj.
(m68k-*-coff*): Remove case.
(mmix-*-*): Don't disable libgloss on host.
(mn10200-*-*, mn10300-*-*): Remove cases.
(powerpc*-*-winnt* | powerpc*-*-pe*, powerpcle-*-solaris*,
powerpc-*-beos*, m68k-apollo-*, mips*-*-irix5*, mips*-*-bsd*):
Don't disable libgcj.
(romp-*-*): Remove case.
(sparclite-*-*, sparc-*-sunos4*): Don't disable libgcj.
(sparc-*-solaris2.[[0-6]] | sparc-*-solaris2.[[0-6]].*): Remove
case.
(v810-*-*): Don't disable GCC libraries.
(v850*-*-*, vax-*-vms, xtensa*-*-*): Remove cases.
(ip2k-*-*): Don't disable GCC libraries.
* configure: Regenerate.
From-SVN: r171826
2011-04-01 13:57:09 +02:00
noconfigdirs="$noconfigdirs bfd binutils gas gdb ld opcodes target-libgloss"
1997-08-22 00:57:35 +02:00
;;
vax-*-*)
2011-04-28 15:23:08 +02:00
noconfigdirs="$noconfigdirs target-newlib target-libgloss"
1997-08-22 00:57:35 +02:00
;;
esac
# If we aren't building newlib, then don't build libgloss, since libgloss
# depends upon some newlib header files.
case "${noconfigdirs}" in
*target-libgloss*) ;;
*target-newlib*) noconfigdirs="$noconfigdirs target-libgloss" ;;
2002-07-01 23:01:48 +02:00
esac
1997-08-22 00:57:35 +02:00
2002-07-01 23:01:48 +02:00
# Work in distributions that contain no compiler tools, like Autoconf.
configure.in: Convert to autoconf script.
(toplev)
* configure.in: Convert to autoconf script. Blow away lots
of now-redundant Makefile fragments.
* configure: Generate using Autoconf.
* Makefile.tpl: Rewrite to reflect autoconfiscation.
* Makefile.in: Regenerate.
(config)
* acx.m4: New.
* mh-a68bsd, mh-aix386, mh-apollo68, mh-delta88, mh-hp300,
mh-hpux, mh-hpux8, mh-irix5, mh-irix6, mh-ncrsvr43, mh-openedition,
mh-riscos, mh-sysv: Delete.
* mh-cxux, mh-dgux386, mh-interix, mh-lynxrs6k, mh-ncr3000,
mh-necv4, mh-sco, mh-solaris, mh-sysv4, mh-sysv5, mt-v810: Simplify.
From-SVN: r60558
2002-12-28 07:57:50 +01:00
host_makefile_frag=/dev/null
2002-07-01 23:01:48 +02:00
if test -d ${srcdir}/config ; then
case "${host}" in
2003-05-19 20:10:21 +02:00
i[[3456789]]86-*-msdosdjgpp*)
2002-07-01 23:01:48 +02:00
host_makefile_frag="config/mh-djgpp"
;;
*-cygwin*)
2008-04-04 13:39:20 +02:00
ACX_CHECK_CYGWIN_CAT_WORKS
2002-07-01 23:01:48 +02:00
host_makefile_frag="config/mh-cygwin"
;;
2008-04-04 13:16:10 +02:00
*-mingw*)
2007-09-06 17:42:02 +02:00
host_makefile_frag="config/mh-mingw"
2007-01-08 19:04:46 +01:00
;;
2015-05-03 19:31:26 +02:00
alpha*-linux*)
2015-03-27 18:08:44 +01:00
host_makefile_frag="config/mh-alpha-linux"
;;
configure.ac: Add makefile fragments for hpux.
2008-07-30 Paolo Bonzini <bonzini@gnu.org>
* configure.ac: Add makefile fragments for hpux.
* Makefile.def (flags_to_pass): Add ADA_CFLAGS.
* Makefile.tpl (HOST_EXPORTS): Pass ADA_CFLAGS.
* configure: Regenerate.
* Makefile.in: Regenerate.
config:
2008-07-30 Paolo Bonzini <bonzini@gnu.org>
* mh-pa: New, from gcc/config/pa/x-ada.
* mh-pa-hpux10: New, from gcc/config/pa/x-ada-hpux10.
gcc:
2008-07-30 Paolo Bonzini <bonzini@gnu.org>
* configure.ac: Substitute ADA_CFLAGS.
* configure: Regenerate.
* config.host: Remove mention of pa/x-ada and pa/x-ada-hpux10 files.
* Makefile.in: Remove mention of X_* variables.
* config/pa/x-ada-hpux10: Remove.
* config/pa/x-ada: Remove.
* doc/fragments.texi: Update.
gcc/ada:
2008-07-30 Paolo Bonzini <bonzini@gnu.org>
* gcc-interface/Make-lang.in (ALL_ADAFLAGS): Remove X_ADAFLAGS and
T_ADAFLAGS, replace ALL_ADA_CFLAGS with ADA_CFLAGS.
(ALL_ADA_CFLAGS): Remove, replace throughout with ADA_CFLAGS.
* gcc-interface/Makefile.in (XCFLAGS, X_CFLAGS, X_CPPFLAGS, T_CPPFLAGS,
X_ADA_CFLAGS, T_ADA_CFLAGS, X_ADAFLAGS, T_ADAFLAGS, ADA_CFLAGS,
ALL_ADA_CFLAGS): Remove.
(ALL_ADAFLAGS, MOST_ADAFLAGS): Remove X_ADAFLAGS and T_ADAFLAGS,
replace ALL_ADA_CFLAGS with ADA_CFLAGS.
(GCC_CFLAGS): Remove X_CFLAGS.
(LOOSE_CFLAGS): Remove X_CFLAGS and XCFLAGS.
(ALL_CPPFLAGS): Remove X_CPPFLAGS and T_CPPFLAGS.
(ADA_CFLAGS): Substitute.
gnattools:
2008-07-30 Paolo Bonzini <bonzini@gnu.org>
* configure.ac (x_ada_cflags): Remove.
(ADA_CFLAGS): Substitute.
* configure: Regenerate.
* Makefile.in (ADA_CFLAGS): Substitute.
(T_ADA_CFLAGS, X_ADA_CFLAGS, ALL_ADA_CFLAGS): Remove.
(TOOLS_FLAGS_TO_PASS_1, TOOLS_FLAGS_TO_PASS_1re,
TOOLS_FLAGS_TO_PASS_NATIVE, TOOLS_FLAGS_TO_PASS_CROSS):
Pass ADA_CFLAGS.
From-SVN: r138301
2008-07-30 14:17:17 +02:00
hppa*-hp-hpux10*)
host_makefile_frag="config/mh-pa-hpux10"
2002-07-01 23:01:48 +02:00
;;
* configure.ac (i[[3456789]]86-*-vsta, i[[3456789]]86-*-go32*,
i[[3456789]]86-*-beos*, powerpc-*-beos*, m68k-hp-hpux*,
m68k-apollo-sysv*, m68k-apollo-bsd*, m88k-dg-dgux*,
m88k-harris-cxux*, m88k-motorola-sysv*, mips*-dec-ultrix*,
mips*-nec-sysv4*, mips*-sgi-irix4*, mips*-*-sysv4*, mips*-*-sysv*,
i370-ibm-opened*, i[[3456789]]86-*-sysv5*, i[[3456789]]86-*-dgux*,
i[[3456789]]86-ncr-sysv4.3*, i[[3456789]]86-ncr-sysv4*,
i[[3456789]]86-*-sco3.2v5*, i[[3456789]]86-*-sco*,
i[[3456789]]86-*-udk*, vax-*-ultrix2*, m68k-sun-sunos*,
hppa*-*-hiux*, *-*-hiux*, rs6000-*-lynxos*, *-*-sysv4*,
*-*-rhapsody*): Remove host cases.
* configure: Regenerate.
config:
* mh-cxux, mh-decstation, mh-dgux386, mh-lynxrs6k, mh-ncr3000,
mh-necv4, mh-sco, mh-sysv5: Remove.
From-SVN: r171412
2011-03-24 17:49:56 +01:00
hppa*-hp-hpux*)
configure.ac: Add makefile fragments for hpux.
2008-07-30 Paolo Bonzini <bonzini@gnu.org>
* configure.ac: Add makefile fragments for hpux.
* Makefile.def (flags_to_pass): Add ADA_CFLAGS.
* Makefile.tpl (HOST_EXPORTS): Pass ADA_CFLAGS.
* configure: Regenerate.
* Makefile.in: Regenerate.
config:
2008-07-30 Paolo Bonzini <bonzini@gnu.org>
* mh-pa: New, from gcc/config/pa/x-ada.
* mh-pa-hpux10: New, from gcc/config/pa/x-ada-hpux10.
gcc:
2008-07-30 Paolo Bonzini <bonzini@gnu.org>
* configure.ac: Substitute ADA_CFLAGS.
* configure: Regenerate.
* config.host: Remove mention of pa/x-ada and pa/x-ada-hpux10 files.
* Makefile.in: Remove mention of X_* variables.
* config/pa/x-ada-hpux10: Remove.
* config/pa/x-ada: Remove.
* doc/fragments.texi: Update.
gcc/ada:
2008-07-30 Paolo Bonzini <bonzini@gnu.org>
* gcc-interface/Make-lang.in (ALL_ADAFLAGS): Remove X_ADAFLAGS and
T_ADAFLAGS, replace ALL_ADA_CFLAGS with ADA_CFLAGS.
(ALL_ADA_CFLAGS): Remove, replace throughout with ADA_CFLAGS.
* gcc-interface/Makefile.in (XCFLAGS, X_CFLAGS, X_CPPFLAGS, T_CPPFLAGS,
X_ADA_CFLAGS, T_ADA_CFLAGS, X_ADAFLAGS, T_ADAFLAGS, ADA_CFLAGS,
ALL_ADA_CFLAGS): Remove.
(ALL_ADAFLAGS, MOST_ADAFLAGS): Remove X_ADAFLAGS and T_ADAFLAGS,
replace ALL_ADA_CFLAGS with ADA_CFLAGS.
(GCC_CFLAGS): Remove X_CFLAGS.
(LOOSE_CFLAGS): Remove X_CFLAGS and XCFLAGS.
(ALL_CPPFLAGS): Remove X_CPPFLAGS and T_CPPFLAGS.
(ADA_CFLAGS): Substitute.
gnattools:
2008-07-30 Paolo Bonzini <bonzini@gnu.org>
* configure.ac (x_ada_cflags): Remove.
(ADA_CFLAGS): Substitute.
* configure: Regenerate.
* Makefile.in (ADA_CFLAGS): Substitute.
(T_ADA_CFLAGS, X_ADA_CFLAGS, ALL_ADA_CFLAGS): Remove.
(TOOLS_FLAGS_TO_PASS_1, TOOLS_FLAGS_TO_PASS_1re,
TOOLS_FLAGS_TO_PASS_NATIVE, TOOLS_FLAGS_TO_PASS_CROSS):
Pass ADA_CFLAGS.
From-SVN: r138301
2008-07-30 14:17:17 +02:00
host_makefile_frag="config/mh-pa"
;;
hppa*-*)
host_makefile_frag="config/mh-pa"
;;
2010-11-04 11:43:47 +01:00
*-*-darwin*)
host_makefile_frag="config/mh-darwin"
2004-09-01 05:34:59 +02:00
;;
2005-12-19 18:02:00 +01:00
powerpc-*-aix*)
host_makefile_frag="config/mh-ppc-aix"
;;
rs6000-*-aix*)
host_makefile_frag="config/mh-ppc-aix"
;;
2002-07-01 23:01:48 +02:00
esac
fi
2004-03-11 06:01:17 +01:00
if test "${build}" != "${host}" ; then
Makefile.tpl (AR_FOR_BUILD, [...]): Use autoconf substitutions.
2007-10-01 Paolo Bonzini <bonzini@gnu.org>
* Makefile.tpl (AR_FOR_BUILD, AS_FOR_BUILD, CXX_FOR_BUILD,
DLLTOOL_FOR_BUILD, GCJ_FOR_BUILD, GFORTRAN_FOR_BUILD,
LDFLAGS_FOR_BUILD, LD_FOR_BUILD, NM_FOR_BUILD, RANLIB_FOR_BUILD,
WINDMC_FOR_BUILD, WINDRES_FOR_BUILD): Use autoconf substitutions.
* configure.ac: Default them to host tools for $host = $build.
Subst them.
* configure: Regenerate.
* Makefile.in: Regenerate.
From-SVN: r128902
2007-10-01 09:15:42 +02:00
AR_FOR_BUILD=${AR_FOR_BUILD-ar}
AS_FOR_BUILD=${AS_FOR_BUILD-as}
2004-03-11 06:01:17 +01:00
CC_FOR_BUILD=${CC_FOR_BUILD-gcc}
Makefile.tpl (AR_FOR_BUILD, [...]): Use autoconf substitutions.
2007-10-01 Paolo Bonzini <bonzini@gnu.org>
* Makefile.tpl (AR_FOR_BUILD, AS_FOR_BUILD, CXX_FOR_BUILD,
DLLTOOL_FOR_BUILD, GCJ_FOR_BUILD, GFORTRAN_FOR_BUILD,
LDFLAGS_FOR_BUILD, LD_FOR_BUILD, NM_FOR_BUILD, RANLIB_FOR_BUILD,
WINDMC_FOR_BUILD, WINDRES_FOR_BUILD): Use autoconf substitutions.
* configure.ac: Default them to host tools for $host = $build.
Subst them.
* configure: Regenerate.
* Makefile.in: Regenerate.
From-SVN: r128902
2007-10-01 09:15:42 +02:00
CXX_FOR_BUILD=${CXX_FOR_BUILD-g++}
GFORTRAN_FOR_BUILD=${GFORTRAN_FOR_BUILD-gfortran}
2010-11-19 22:47:18 +01:00
GOC_FOR_BUILD=${GOC_FOR_BUILD-gccgo}
Makefile.tpl (AR_FOR_BUILD, [...]): Use autoconf substitutions.
2007-10-01 Paolo Bonzini <bonzini@gnu.org>
* Makefile.tpl (AR_FOR_BUILD, AS_FOR_BUILD, CXX_FOR_BUILD,
DLLTOOL_FOR_BUILD, GCJ_FOR_BUILD, GFORTRAN_FOR_BUILD,
LDFLAGS_FOR_BUILD, LD_FOR_BUILD, NM_FOR_BUILD, RANLIB_FOR_BUILD,
WINDMC_FOR_BUILD, WINDRES_FOR_BUILD): Use autoconf substitutions.
* configure.ac: Default them to host tools for $host = $build.
Subst them.
* configure: Regenerate.
* Makefile.in: Regenerate.
From-SVN: r128902
2007-10-01 09:15:42 +02:00
DLLTOOL_FOR_BUILD=${DLLTOOL_FOR_BUILD-dlltool}
LD_FOR_BUILD=${LD_FOR_BUILD-ld}
NM_FOR_BUILD=${NM_FOR_BUILD-nm}
RANLIB_FOR_BUILD=${RANLIB_FOR_BUILD-ranlib}
WINDRES_FOR_BUILD=${WINDRES_FOR_BUILD-windres}
WINDMC_FOR_BUILD=${WINDMC_FOR_BUILD-windmc}
2004-03-11 06:01:17 +01:00
else
Makefile.tpl (AR_FOR_BUILD, [...]): Use autoconf substitutions.
2007-10-01 Paolo Bonzini <bonzini@gnu.org>
* Makefile.tpl (AR_FOR_BUILD, AS_FOR_BUILD, CXX_FOR_BUILD,
DLLTOOL_FOR_BUILD, GCJ_FOR_BUILD, GFORTRAN_FOR_BUILD,
LDFLAGS_FOR_BUILD, LD_FOR_BUILD, NM_FOR_BUILD, RANLIB_FOR_BUILD,
WINDMC_FOR_BUILD, WINDRES_FOR_BUILD): Use autoconf substitutions.
* configure.ac: Default them to host tools for $host = $build.
Subst them.
* configure: Regenerate.
* Makefile.in: Regenerate.
From-SVN: r128902
2007-10-01 09:15:42 +02:00
AR_FOR_BUILD="\$(AR)"
AS_FOR_BUILD="\$(AS)"
2004-03-11 06:01:17 +01:00
CC_FOR_BUILD="\$(CC)"
Makefile.tpl (AR_FOR_BUILD, [...]): Use autoconf substitutions.
2007-10-01 Paolo Bonzini <bonzini@gnu.org>
* Makefile.tpl (AR_FOR_BUILD, AS_FOR_BUILD, CXX_FOR_BUILD,
DLLTOOL_FOR_BUILD, GCJ_FOR_BUILD, GFORTRAN_FOR_BUILD,
LDFLAGS_FOR_BUILD, LD_FOR_BUILD, NM_FOR_BUILD, RANLIB_FOR_BUILD,
WINDMC_FOR_BUILD, WINDRES_FOR_BUILD): Use autoconf substitutions.
* configure.ac: Default them to host tools for $host = $build.
Subst them.
* configure: Regenerate.
* Makefile.in: Regenerate.
From-SVN: r128902
2007-10-01 09:15:42 +02:00
CXX_FOR_BUILD="\$(CXX)"
GFORTRAN_FOR_BUILD="\$(GFORTRAN)"
2010-11-19 22:47:18 +01:00
GOC_FOR_BUILD="\$(GOC)"
Makefile.tpl (AR_FOR_BUILD, [...]): Use autoconf substitutions.
2007-10-01 Paolo Bonzini <bonzini@gnu.org>
* Makefile.tpl (AR_FOR_BUILD, AS_FOR_BUILD, CXX_FOR_BUILD,
DLLTOOL_FOR_BUILD, GCJ_FOR_BUILD, GFORTRAN_FOR_BUILD,
LDFLAGS_FOR_BUILD, LD_FOR_BUILD, NM_FOR_BUILD, RANLIB_FOR_BUILD,
WINDMC_FOR_BUILD, WINDRES_FOR_BUILD): Use autoconf substitutions.
* configure.ac: Default them to host tools for $host = $build.
Subst them.
* configure: Regenerate.
* Makefile.in: Regenerate.
From-SVN: r128902
2007-10-01 09:15:42 +02:00
DLLTOOL_FOR_BUILD="\$(DLLTOOL)"
LD_FOR_BUILD="\$(LD)"
NM_FOR_BUILD="\$(NM)"
RANLIB_FOR_BUILD="\$(RANLIB)"
WINDRES_FOR_BUILD="\$(WINDRES)"
WINDMC_FOR_BUILD="\$(WINDMC)"
2007-02-13 14:39:19 +01:00
fi
2004-03-11 06:01:17 +01:00
2007-02-13 14:39:19 +01:00
AC_PROG_CC
AC_PROG_CXX
# We must set the default linker to the linker used by gcc for the correct
# operation of libtool. If LD is not defined and we are using gcc, try to
# set the LD default to the ld used by gcc.
if test -z "$LD"; then
if test "$GCC" = yes; then
case $build in
*-*-mingw*)
gcc_prog_ld=`$CC -print-prog-name=ld 2>&1 | tr -d '\015'` ;;
*)
gcc_prog_ld=`$CC -print-prog-name=ld 2>&1` ;;
esac
case $gcc_prog_ld in
# Accept absolute paths.
[[\\/]* | [A-Za-z]:[\\/]*)]
LD="$gcc_prog_ld" ;;
esac
fi
2004-03-11 06:01:17 +01:00
fi
2012-10-22 09:27:21 +02:00
# Check whether -static-libstdc++ -static-libgcc is supported.
have_static_libs=no
if test "$GCC" = yes; then
saved_LDFLAGS="$LDFLAGS"
LDFLAGS="$LDFLAGS -static-libstdc++ -static-libgcc"
AC_MSG_CHECKING([whether g++ accepts -static-libstdc++ -static-libgcc])
AC_LANG_PUSH(C++)
2012-10-24 00:57:43 +02:00
AC_LINK_IFELSE([
#if (__GNUC__ < 4) || (__GNUC__ == 4 && __GNUC_MINOR__ < 5)
#error -static-libstdc++ not implemented
#endif
int main() {}],
2012-10-22 09:27:21 +02:00
[AC_MSG_RESULT([yes]); have_static_libs=yes],
[AC_MSG_RESULT([no])])
AC_LANG_POP(C++)
LDFLAGS="$saved_LDFLAGS"
fi
2004-03-11 06:01:17 +01:00
ACX_PROG_GNAT
2004-04-26 13:46:42 +02:00
ACX_PROG_CMP_IGNORE_INITIAL
2004-03-11 06:01:17 +01:00
2011-07-20 16:08:42 +02:00
AC_ARG_ENABLE([bootstrap],
[AS_HELP_STRING([--enable-bootstrap],
[enable bootstrapping @<:@yes if native build@:>@])],,
enable_bootstrap=default)
# Issue errors and warnings for invalid/strange bootstrap combinations.
2011-07-26 20:44:11 +02:00
if test -r $srcdir/gcc/configure; then
have_compiler=yes
else
have_compiler=no
fi
2011-07-20 16:08:42 +02:00
case "$have_compiler:$host:$target:$enable_bootstrap" in
*:*:*:no) ;;
# Default behavior. Enable bootstrap if we have a compiler
# and we are in a native configuration.
yes:$build:$build:default)
enable_bootstrap=yes ;;
*:*:*:default)
enable_bootstrap=no ;;
# We have a compiler and we are in a native configuration, bootstrap is ok
yes:$build:$build:yes)
;;
# Other configurations, but we have a compiler. Assume the user knows
# what he's doing.
yes:*:*:yes)
AC_MSG_WARN([trying to bootstrap a cross compiler])
;;
# No compiler: if they passed --enable-bootstrap explicitly, fail
no:*:*:yes)
AC_MSG_ERROR([cannot bootstrap without a compiler]) ;;
# Fail if wrong command line
*)
AC_MSG_ERROR([invalid option for --enable-bootstrap])
;;
esac
2015-05-26 14:29:13 +02:00
# When bootstrapping with GCC, build stage 1 in C++98 mode to ensure that a
# C++98 compiler can still start the bootstrap.
if test "$enable_bootstrap:$GXX" = "yes:yes"; then
2015-06-02 19:50:23 +02:00
CXX="$CXX -std=gnu++98"
2015-05-26 14:29:13 +02:00
fi
2010-01-07 22:58:23 +01:00
# Used for setting $lt_cv_objdir
_LT_CHECK_OBJDIR
2009-05-30 02:43:36 +02:00
# Check for GMP, MPFR and MPC
2009-12-06 17:11:06 +01:00
gmplibs="-lmpc -lmpfr -lgmp"
2004-05-13 08:41:07 +02:00
gmpinc=
2007-01-11 12:20:44 +01:00
have_gmp=no
2009-05-30 02:43:36 +02:00
# Specify a location for mpc
# check for this first so it ends up on the link line before mpfr.
2011-01-21 14:18:23 +01:00
AC_ARG_WITH(mpc,
[AS_HELP_STRING([--with-mpc=PATH],
[specify prefix directory for installed MPC package.
Equivalent to --with-mpc-include=PATH/include
plus --with-mpc-lib=PATH/lib])])
AC_ARG_WITH(mpc-include,
[AS_HELP_STRING([--with-mpc-include=PATH],
[specify directory for installed MPC include files])])
AC_ARG_WITH(mpc-lib,
[AS_HELP_STRING([--with-mpc-lib=PATH],
[specify directory for the installed MPC library])])
2009-05-30 02:43:36 +02:00
if test "x$with_mpc" != x; then
2009-12-06 17:11:06 +01:00
gmplibs="-L$with_mpc/lib $gmplibs"
gmpinc="-I$with_mpc/include $gmpinc"
2009-05-30 02:43:36 +02:00
fi
if test "x$with_mpc_include" != x; then
2009-12-06 17:11:06 +01:00
gmpinc="-I$with_mpc_include $gmpinc"
2009-05-30 02:43:36 +02:00
fi
if test "x$with_mpc_lib" != x; then
2009-12-06 17:11:06 +01:00
gmplibs="-L$with_mpc_lib $gmplibs"
2009-05-30 02:43:36 +02:00
fi
if test "x$with_mpc$with_mpc_include$with_mpc_lib" = x && test -d ${srcdir}/mpc; then
2010-01-07 22:58:23 +01:00
gmplibs='-L$$r/$(HOST_SUBDIR)/mpc/src/'"$lt_cv_objdir $gmplibs"
2009-12-06 17:11:06 +01:00
gmpinc='-I$$s/mpc/src '"$gmpinc"
2009-05-30 02:43:36 +02:00
# Do not test the mpc version. Assume that it is sufficient, since
# it is in the source tree, and the library has not been built yet
# but it would be included on the link line in the version check below
# hence making the test fail.
2009-12-06 17:11:06 +01:00
have_gmp=yes
2009-05-30 02:43:36 +02:00
fi
2007-01-11 12:20:44 +01:00
2004-08-03 23:11:29 +02:00
# Specify a location for mpfr
# check for this first so it ends up on the link line before gmp.
2011-01-21 14:18:23 +01:00
AC_ARG_WITH(mpfr-dir,
[AS_HELP_STRING([--with-mpfr-dir=PATH], [this option has been REMOVED])],
[AC_MSG_ERROR([The --with-mpfr-dir=PATH option has been removed.
Use --with-mpfr=PATH or --with-mpfr-include=PATH plus --with-mpfr-lib=PATH])])
AC_ARG_WITH(mpfr,
[AS_HELP_STRING([--with-mpfr=PATH],
[specify prefix directory for installed MPFR package.
Equivalent to --with-mpfr-include=PATH/include
plus --with-mpfr-lib=PATH/lib])])
AC_ARG_WITH(mpfr-include,
[AS_HELP_STRING([--with-mpfr-include=PATH],
[specify directory for installed MPFR include files])])
AC_ARG_WITH(mpfr-lib,
[AS_HELP_STRING([--with-mpfr-lib=PATH],
[specify directory for the installed MPFR library])])
2004-08-03 23:11:29 +02:00
if test "x$with_mpfr" != x; then
gmplibs="-L$with_mpfr/lib $gmplibs"
2009-12-06 17:11:06 +01:00
gmpinc="-I$with_mpfr/include $gmpinc"
2004-08-03 23:11:29 +02:00
fi
2006-11-26 23:37:33 +01:00
if test "x$with_mpfr_include" != x; then
2009-12-06 17:11:06 +01:00
gmpinc="-I$with_mpfr_include $gmpinc"
2006-11-26 23:37:33 +01:00
fi
if test "x$with_mpfr_lib" != x; then
gmplibs="-L$with_mpfr_lib $gmplibs"
fi
2007-01-11 12:20:44 +01:00
if test "x$with_mpfr$with_mpfr_include$with_mpfr_lib" = x && test -d ${srcdir}/mpfr; then
2016-09-12 16:08:48 +02:00
# MPFR v3.1.0 moved the sources into a src sub-directory.
if ! test -d ${srcdir}/mpfr/src; then
AC_MSG_ERROR([dnl
Building GCC with MPFR in the source tree is only handled for MPFR 3.1.0+.])
fi
2016-05-02 17:23:20 +02:00
gmplibs='-L$$r/$(HOST_SUBDIR)/mpfr/src/'"$lt_cv_objdir $gmplibs"
gmpinc='-I$$r/$(HOST_SUBDIR)/mpfr/src -I$$s/mpfr/src '"$gmpinc"
extra_mpc_mpfr_configure_flags='--with-mpfr-include=$$s/mpfr/src --with-mpfr-lib=$$r/$(HOST_SUBDIR)/mpfr/src/'"$lt_cv_objdir"
2007-01-11 12:20:44 +01:00
# Do not test the mpfr version. Assume that it is sufficient, since
# it is in the source tree, and the library has not been built yet
# but it would be included on the link line in the version check below
# hence making the test fail.
have_gmp=yes
fi
2004-08-03 23:11:29 +02:00
2004-05-13 08:41:07 +02:00
# Specify a location for gmp
2011-01-21 14:18:23 +01:00
AC_ARG_WITH(gmp-dir,
[AS_HELP_STRING([--with-gmp-dir=PATH], [this option has been REMOVED])],
[AC_MSG_ERROR([The --with-gmp-dir=PATH option has been removed.
Use --with-gmp=PATH or --with-gmp-include=PATH plus --with-gmp-lib=PATH])])
AC_ARG_WITH(gmp,
[AS_HELP_STRING([--with-gmp=PATH],
[specify prefix directory for the installed GMP package.
Equivalent to --with-gmp-include=PATH/include
plus --with-gmp-lib=PATH/lib])])
AC_ARG_WITH(gmp-include,
[AS_HELP_STRING([--with-gmp-include=PATH],
[specify directory for installed GMP include files])])
AC_ARG_WITH(gmp-lib,
[AS_HELP_STRING([--with-gmp-lib=PATH],
[specify directory for the installed GMP library])])
2004-05-13 08:41:07 +02:00
2004-08-03 23:11:29 +02:00
if test "x$with_gmp" != x; then
gmplibs="-L$with_gmp/lib $gmplibs"
gmpinc="-I$with_gmp/include $gmpinc"
2004-05-13 08:41:07 +02:00
fi
2006-11-26 23:37:33 +01:00
if test "x$with_gmp_include" != x; then
gmpinc="-I$with_gmp_include $gmpinc"
fi
if test "x$with_gmp_lib" != x; then
gmplibs="-L$with_gmp_lib $gmplibs"
fi
2007-01-11 12:20:44 +01:00
if test "x$with_gmp$with_gmp_include$with_gmp_lib" = x && test -d ${srcdir}/gmp; then
2010-01-07 22:58:23 +01:00
gmplibs='-L$$r/$(HOST_SUBDIR)/gmp/'"$lt_cv_objdir $gmplibs"
2007-01-11 12:20:44 +01:00
gmpinc='-I$$r/$(HOST_SUBDIR)/gmp -I$$s/gmp '"$gmpinc"
2010-07-23 21:35:24 +02:00
extra_mpfr_configure_flags='--with-gmp-include=$$r/$(HOST_SUBDIR)/gmp --with-gmp-lib=$$r/$(HOST_SUBDIR)/gmp/'"$lt_cv_objdir"
2010-01-07 22:58:23 +01:00
extra_mpc_gmp_configure_flags='--with-gmp-include=$$r/$(HOST_SUBDIR)/gmp --with-gmp-lib=$$r/$(HOST_SUBDIR)/gmp/'"$lt_cv_objdir"
2012-07-06 14:31:03 +02:00
extra_isl_gmp_configure_flags='--with-gmp-builddir=$$r/$(HOST_SUBDIR)/gmp'
2007-01-11 12:20:44 +01:00
# Do not test the gmp version. Assume that it is sufficient, since
# it is in the source tree, and the library has not been built yet
# but it would be included on the link line in the version check below
# hence making the test fail.
have_gmp=yes
fi
2004-05-13 08:41:07 +02:00
2007-01-11 15:53:06 +01:00
if test -d ${srcdir}/gcc && test "x$have_gmp" = xno; then
2007-01-11 12:20:44 +01:00
have_gmp=yes
saved_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS $gmpinc"
2010-01-31 19:12:21 +01:00
# Check for the recommended and required versions of GMP.
AC_MSG_CHECKING([for the correct version of gmp.h])
2007-01-11 12:20:44 +01:00
AC_TRY_COMPILE([#include "gmp.h"],[
2010-01-31 19:12:21 +01:00
#define GCC_GMP_VERSION_NUM(a,b,c) (((a) << 16L) | ((b) << 8) | (c))
#define GCC_GMP_VERSION GCC_GMP_VERSION_NUM(__GNU_MP_VERSION,__GNU_MP_VERSION_MINOR,__GNU_MP_VERSION_PATCHLEVEL)
2012-09-06 20:14:58 +02:00
#if GCC_GMP_VERSION < GCC_GMP_VERSION_NUM(4,2,3)
2006-09-27 22:15:22 +02:00
choke me
2007-01-11 12:20:44 +01:00
#endif
2010-04-02 19:35:47 +02:00
], [AC_TRY_COMPILE([#include <gmp.h>],[
2010-01-31 19:12:21 +01:00
#define GCC_GMP_VERSION_NUM(a,b,c) (((a) << 16L) | ((b) << 8) | (c))
#define GCC_GMP_VERSION GCC_GMP_VERSION_NUM(__GNU_MP_VERSION,__GNU_MP_VERSION_MINOR,__GNU_MP_VERSION_PATCHLEVEL)
#if GCC_GMP_VERSION < GCC_GMP_VERSION_NUM(4,3,2)
choke me
#endif
2010-04-02 19:35:47 +02:00
], [AC_MSG_RESULT([yes])], [AC_MSG_RESULT([buggy but acceptable])])],
2010-01-31 19:12:21 +01:00
[AC_MSG_RESULT([no]); have_gmp=no])
2007-01-11 12:20:44 +01:00
2009-05-30 02:43:36 +02:00
# If we have GMP, check the MPFR version.
2007-01-11 12:20:44 +01:00
if test x"$have_gmp" = xyes; then
2010-01-31 19:12:21 +01:00
# Check for the recommended and required versions of MPFR.
AC_MSG_CHECKING([for the correct version of mpfr.h])
2009-05-30 02:43:36 +02:00
AC_TRY_COMPILE([#include <gmp.h>
2007-01-11 12:20:44 +01:00
#include <mpfr.h>],[
2012-05-07 17:30:42 +02:00
#if MPFR_VERSION < MPFR_VERSION_NUM(2,4,0)
2007-01-11 12:20:44 +01:00
choke me
#endif
2010-04-02 19:35:47 +02:00
], [AC_TRY_COMPILE([#include <gmp.h>
2009-05-30 02:43:36 +02:00
#include <mpfr.h>],[
2010-01-31 19:12:21 +01:00
#if MPFR_VERSION < MPFR_VERSION_NUM(2,4,2)
2009-05-30 02:43:36 +02:00
choke me
#endif
2010-04-02 19:35:47 +02:00
], [AC_MSG_RESULT([yes])], [AC_MSG_RESULT([buggy but acceptable])])],
2009-05-30 02:43:36 +02:00
[AC_MSG_RESULT([no]); have_gmp=no])
fi
# Check for the MPC header version.
2009-12-06 17:11:06 +01:00
if test x"$have_gmp" = xyes ; then
2010-01-31 19:12:21 +01:00
# Check for the recommended and required versions of MPC.
2009-05-30 02:43:36 +02:00
AC_MSG_CHECKING([for the correct version of mpc.h])
AC_TRY_COMPILE([#include <mpc.h>],[
2010-01-31 19:12:21 +01:00
#if MPC_VERSION < MPC_VERSION_NUM(0,8,0)
2009-05-30 02:43:36 +02:00
choke me
#endif
2010-04-02 19:35:47 +02:00
], [AC_TRY_COMPILE([#include <mpc.h>],[
2010-01-31 19:12:21 +01:00
#if MPC_VERSION < MPC_VERSION_NUM(0,8,1)
choke me
#endif
2010-04-02 19:35:47 +02:00
], [AC_MSG_RESULT([yes])], [AC_MSG_RESULT([buggy but acceptable])])],
2010-01-31 19:12:21 +01:00
[AC_MSG_RESULT([no]); have_gmp=no])
2009-05-30 02:43:36 +02:00
fi
# Now check the MPFR library.
if test x"$have_gmp" = xyes; then
saved_LIBS="$LIBS"
LIBS="$LIBS $gmplibs"
2009-12-06 17:11:06 +01:00
AC_MSG_CHECKING([for the correct version of the gmp/mpfr/mpc libraries])
AC_TRY_LINK([#include <mpc.h>],[
2007-02-28 01:56:22 +01:00
mpfr_t n;
mpfr_t x;
2009-12-06 17:11:06 +01:00
mpc_t c;
2007-01-11 12:20:44 +01:00
int t;
2007-02-28 01:56:22 +01:00
mpfr_init (n);
mpfr_init (x);
2007-01-11 12:20:44 +01:00
mpfr_atan2 (n, n, x, GMP_RNDN);
mpfr_erfc (n, x, GMP_RNDN);
mpfr_subnormalize (x, t, GMP_RNDN);
2009-12-06 17:11:06 +01:00
mpfr_clear(n);
mpfr_clear(x);
mpc_init2 (c, 53);
mpc_set_ui_ui (c, 1, 1, MPC_RNDNN);
mpc_cosh (c, c, MPC_RNDNN);
mpc_pow (c, c, c, MPC_RNDNN);
mpc_acosh (c, c, MPC_RNDNN);
mpc_clear (c);
2009-05-30 02:43:36 +02:00
], [AC_MSG_RESULT([yes])], [AC_MSG_RESULT([no]); have_gmp=no])
LIBS="$saved_LIBS"
2007-01-11 12:20:44 +01:00
fi
2009-05-30 02:43:36 +02:00
2007-01-11 12:20:44 +01:00
CFLAGS="$saved_CFLAGS"
2004-05-13 08:41:07 +02:00
2010-01-31 19:12:21 +01:00
# The library versions listed in the error message below should match
# the HARD-minimums enforced above.
2007-01-11 12:20:44 +01:00
if test x$have_gmp != xyes; then
2012-05-07 17:30:42 +02:00
AC_MSG_ERROR([Building GCC requires GMP 4.2+, MPFR 2.4.0+ and MPC 0.8.0+.
2009-12-06 17:11:06 +01:00
Try the --with-gmp, --with-mpfr and/or --with-mpc options to specify
their locations. Source code for these libraries can be found at
their respective hosting sites as well as at
ftp://gcc.gnu.org/pub/gcc/infrastructure/. See also
http://gcc.gnu.org/install/prerequisites.html for additional info. If
you obtained GMP, MPFR and/or MPC from a vendor distribution package,
make sure that you have installed both the libraries and the header
files. They may be located in separate packages.])
2007-01-11 12:20:44 +01:00
fi
2006-10-21 15:58:13 +02:00
fi
2009-05-30 02:43:36 +02:00
# Flags needed for both GMP, MPFR and/or MPC.
2004-05-13 08:41:07 +02:00
AC_SUBST(gmplibs)
AC_SUBST(gmpinc)
2009-04-25 05:24:17 +02:00
AC_SUBST(extra_mpfr_configure_flags)
2009-05-30 02:43:36 +02:00
AC_SUBST(extra_mpc_gmp_configure_flags)
AC_SUBST(extra_mpc_mpfr_configure_flags)
2012-07-06 14:31:03 +02:00
AC_SUBST(extra_isl_gmp_configure_flags)
2004-05-13 08:41:07 +02:00
configure.ac: Add --enable-build-with-cxx.
./: * configure.ac: Add --enable-build-with-cxx. When set, add c++ to
boot_languages. Only bootstrap target libraries listed in
target_libs for some boot language. Add --with-stage1-ldflags,
--with-stage1-libs, --with-boot-ldflags, --with-boot-libs. Remove
with_host_libstdcxx from ppllibs. Only add -fkeep-inline-functions
if not building with C++.
* Makefile.def: For target_module libstdc++-v3, set bootstrap=true.
* Makefile.tpl (STAGE1_LDFLAGS, STAGE1_LIBS): New variables.
(POSTSTAGE1_LDFLAGS, POSTSTAGE1_LIBS): New variables.
(HOST_EXPORTS): Add STAGE1_LDFLAGS to LDFLAGS. Export HOST_LIBS.
(POSTSTAGE1_HOST_EXPORTS): Set CXX and CXX_FOR_BUILD. Add
POSTSTAGE1_LDFLAGS to LDFLAGS. Export HOST_LIBS.
(POSTSTAGE1_FLAGS_TO_PASS): Likewise.
* configure, Makefile.in: Rebuild.
gcc/:
* configure.ac: Invoke AC_PROG_CXX. Separate C specific warnings
from loose_warn into c_loose_warn and from strict_warn into
c_strict_warn. Set and substitute warn_cxxflags. Check for
--enable-build-with-cxx. Set and substitute
ENABLE_BUILD_WITH_CXX. Set and substitute HOST_LIBS.
* Makefile.in (CXXFLAGS): New variable.
(C_LOOSE_WARN, C_STRICT_WARN): New variables.
(GCC_WARN_CFLAGS): Add $(C_LOOSE_WARN). Add $(C_STRICT_WARN) if
the default is the same as $(STRICT_WARN).
(GCC_WARN_CXXFLAGS, WARN_CXXFLAGS): New variables.
(CXX): New variable.
(COMPILER): New value if ENABLE_BUILD_WITH_CXX.
(COMPILER_FLAGS, LINKER, LINKER_FLAGS): Likewise.
(ALL_COMPILERFLAGS, ALL_LINKERFLAGS): Likewise.
(HOST_LIBS): New variable.
(GCC_CFLAGS): Add $(C_LOOSE_WARN).
(ALL_CXXFLAGS): New variable.
(LIBS, BACKENDLIBS): Add $(HOST_LIBS).
* doc/install.texi (Configuration): Document
--enable-build-with-cxx, --with-stage1-ldflags,
--with-stage1-libs, --with-boot-ldflags, --with-boot-libs.
* configure: Rebuild.
From-SVN: r148889
2009-06-24 06:03:51 +02:00
# Libraries to use for stage1 or when not bootstrapping.
AC_ARG_WITH(stage1-libs,
2011-01-21 14:18:23 +01:00
[AS_HELP_STRING([--with-stage1-libs=LIBS], [libraries for stage1])],
configure.ac: Add --enable-build-with-cxx.
./: * configure.ac: Add --enable-build-with-cxx. When set, add c++ to
boot_languages. Only bootstrap target libraries listed in
target_libs for some boot language. Add --with-stage1-ldflags,
--with-stage1-libs, --with-boot-ldflags, --with-boot-libs. Remove
with_host_libstdcxx from ppllibs. Only add -fkeep-inline-functions
if not building with C++.
* Makefile.def: For target_module libstdc++-v3, set bootstrap=true.
* Makefile.tpl (STAGE1_LDFLAGS, STAGE1_LIBS): New variables.
(POSTSTAGE1_LDFLAGS, POSTSTAGE1_LIBS): New variables.
(HOST_EXPORTS): Add STAGE1_LDFLAGS to LDFLAGS. Export HOST_LIBS.
(POSTSTAGE1_HOST_EXPORTS): Set CXX and CXX_FOR_BUILD. Add
POSTSTAGE1_LDFLAGS to LDFLAGS. Export HOST_LIBS.
(POSTSTAGE1_FLAGS_TO_PASS): Likewise.
* configure, Makefile.in: Rebuild.
gcc/:
* configure.ac: Invoke AC_PROG_CXX. Separate C specific warnings
from loose_warn into c_loose_warn and from strict_warn into
c_strict_warn. Set and substitute warn_cxxflags. Check for
--enable-build-with-cxx. Set and substitute
ENABLE_BUILD_WITH_CXX. Set and substitute HOST_LIBS.
* Makefile.in (CXXFLAGS): New variable.
(C_LOOSE_WARN, C_STRICT_WARN): New variables.
(GCC_WARN_CFLAGS): Add $(C_LOOSE_WARN). Add $(C_STRICT_WARN) if
the default is the same as $(STRICT_WARN).
(GCC_WARN_CXXFLAGS, WARN_CXXFLAGS): New variables.
(CXX): New variable.
(COMPILER): New value if ENABLE_BUILD_WITH_CXX.
(COMPILER_FLAGS, LINKER, LINKER_FLAGS): Likewise.
(ALL_COMPILERFLAGS, ALL_LINKERFLAGS): Likewise.
(HOST_LIBS): New variable.
(GCC_CFLAGS): Add $(C_LOOSE_WARN).
(ALL_CXXFLAGS): New variable.
(LIBS, BACKENDLIBS): Add $(HOST_LIBS).
* doc/install.texi (Configuration): Document
--enable-build-with-cxx, --with-stage1-ldflags,
--with-stage1-libs, --with-boot-ldflags, --with-boot-libs.
* configure: Rebuild.
From-SVN: r148889
2009-06-24 06:03:51 +02:00
[if test "$withval" = "no" -o "$withval" = "yes"; then
stage1_libs=
else
stage1_libs=$withval
fi],
2015-08-12 17:13:35 +02:00
[stage1_libs=])
configure.ac: Add --enable-build-with-cxx.
./: * configure.ac: Add --enable-build-with-cxx. When set, add c++ to
boot_languages. Only bootstrap target libraries listed in
target_libs for some boot language. Add --with-stage1-ldflags,
--with-stage1-libs, --with-boot-ldflags, --with-boot-libs. Remove
with_host_libstdcxx from ppllibs. Only add -fkeep-inline-functions
if not building with C++.
* Makefile.def: For target_module libstdc++-v3, set bootstrap=true.
* Makefile.tpl (STAGE1_LDFLAGS, STAGE1_LIBS): New variables.
(POSTSTAGE1_LDFLAGS, POSTSTAGE1_LIBS): New variables.
(HOST_EXPORTS): Add STAGE1_LDFLAGS to LDFLAGS. Export HOST_LIBS.
(POSTSTAGE1_HOST_EXPORTS): Set CXX and CXX_FOR_BUILD. Add
POSTSTAGE1_LDFLAGS to LDFLAGS. Export HOST_LIBS.
(POSTSTAGE1_FLAGS_TO_PASS): Likewise.
* configure, Makefile.in: Rebuild.
gcc/:
* configure.ac: Invoke AC_PROG_CXX. Separate C specific warnings
from loose_warn into c_loose_warn and from strict_warn into
c_strict_warn. Set and substitute warn_cxxflags. Check for
--enable-build-with-cxx. Set and substitute
ENABLE_BUILD_WITH_CXX. Set and substitute HOST_LIBS.
* Makefile.in (CXXFLAGS): New variable.
(C_LOOSE_WARN, C_STRICT_WARN): New variables.
(GCC_WARN_CFLAGS): Add $(C_LOOSE_WARN). Add $(C_STRICT_WARN) if
the default is the same as $(STRICT_WARN).
(GCC_WARN_CXXFLAGS, WARN_CXXFLAGS): New variables.
(CXX): New variable.
(COMPILER): New value if ENABLE_BUILD_WITH_CXX.
(COMPILER_FLAGS, LINKER, LINKER_FLAGS): Likewise.
(ALL_COMPILERFLAGS, ALL_LINKERFLAGS): Likewise.
(HOST_LIBS): New variable.
(GCC_CFLAGS): Add $(C_LOOSE_WARN).
(ALL_CXXFLAGS): New variable.
(LIBS, BACKENDLIBS): Add $(HOST_LIBS).
* doc/install.texi (Configuration): Document
--enable-build-with-cxx, --with-stage1-ldflags,
--with-stage1-libs, --with-boot-ldflags, --with-boot-libs.
* configure: Rebuild.
From-SVN: r148889
2009-06-24 06:03:51 +02:00
AC_SUBST(stage1_libs)
2012-10-22 09:27:21 +02:00
# Linker flags to use for stage1 or when not bootstrapping.
AC_ARG_WITH(stage1-ldflags,
[AS_HELP_STRING([--with-stage1-ldflags=FLAGS], [linker flags for stage1])],
[if test "$withval" = "no" -o "$withval" = "yes"; then
stage1_ldflags=
else
stage1_ldflags=$withval
fi],
[stage1_ldflags=
# In stage 1, default to linking libstdc++ and libgcc statically with GCC
# if supported. But if the user explicitly specified the libraries to use,
# trust that they are doing what they want.
if test "$stage1_libs" = "" -a "$have_static_libs" = yes; then
stage1_ldflags="-static-libstdc++ -static-libgcc"
fi])
AC_SUBST(stage1_ldflags)
2015-08-12 17:13:35 +02:00
# Libraries to use for stage2 and later builds.
configure.ac: Add --enable-build-with-cxx.
./: * configure.ac: Add --enable-build-with-cxx. When set, add c++ to
boot_languages. Only bootstrap target libraries listed in
target_libs for some boot language. Add --with-stage1-ldflags,
--with-stage1-libs, --with-boot-ldflags, --with-boot-libs. Remove
with_host_libstdcxx from ppllibs. Only add -fkeep-inline-functions
if not building with C++.
* Makefile.def: For target_module libstdc++-v3, set bootstrap=true.
* Makefile.tpl (STAGE1_LDFLAGS, STAGE1_LIBS): New variables.
(POSTSTAGE1_LDFLAGS, POSTSTAGE1_LIBS): New variables.
(HOST_EXPORTS): Add STAGE1_LDFLAGS to LDFLAGS. Export HOST_LIBS.
(POSTSTAGE1_HOST_EXPORTS): Set CXX and CXX_FOR_BUILD. Add
POSTSTAGE1_LDFLAGS to LDFLAGS. Export HOST_LIBS.
(POSTSTAGE1_FLAGS_TO_PASS): Likewise.
* configure, Makefile.in: Rebuild.
gcc/:
* configure.ac: Invoke AC_PROG_CXX. Separate C specific warnings
from loose_warn into c_loose_warn and from strict_warn into
c_strict_warn. Set and substitute warn_cxxflags. Check for
--enable-build-with-cxx. Set and substitute
ENABLE_BUILD_WITH_CXX. Set and substitute HOST_LIBS.
* Makefile.in (CXXFLAGS): New variable.
(C_LOOSE_WARN, C_STRICT_WARN): New variables.
(GCC_WARN_CFLAGS): Add $(C_LOOSE_WARN). Add $(C_STRICT_WARN) if
the default is the same as $(STRICT_WARN).
(GCC_WARN_CXXFLAGS, WARN_CXXFLAGS): New variables.
(CXX): New variable.
(COMPILER): New value if ENABLE_BUILD_WITH_CXX.
(COMPILER_FLAGS, LINKER, LINKER_FLAGS): Likewise.
(ALL_COMPILERFLAGS, ALL_LINKERFLAGS): Likewise.
(HOST_LIBS): New variable.
(GCC_CFLAGS): Add $(C_LOOSE_WARN).
(ALL_CXXFLAGS): New variable.
(LIBS, BACKENDLIBS): Add $(HOST_LIBS).
* doc/install.texi (Configuration): Document
--enable-build-with-cxx, --with-stage1-ldflags,
--with-stage1-libs, --with-boot-ldflags, --with-boot-libs.
* configure: Rebuild.
From-SVN: r148889
2009-06-24 06:03:51 +02:00
AC_ARG_WITH(boot-libs,
2011-01-21 14:18:23 +01:00
[AS_HELP_STRING([--with-boot-libs=LIBS], [libraries for stage2 and later])],
configure.ac: Add --enable-build-with-cxx.
./: * configure.ac: Add --enable-build-with-cxx. When set, add c++ to
boot_languages. Only bootstrap target libraries listed in
target_libs for some boot language. Add --with-stage1-ldflags,
--with-stage1-libs, --with-boot-ldflags, --with-boot-libs. Remove
with_host_libstdcxx from ppllibs. Only add -fkeep-inline-functions
if not building with C++.
* Makefile.def: For target_module libstdc++-v3, set bootstrap=true.
* Makefile.tpl (STAGE1_LDFLAGS, STAGE1_LIBS): New variables.
(POSTSTAGE1_LDFLAGS, POSTSTAGE1_LIBS): New variables.
(HOST_EXPORTS): Add STAGE1_LDFLAGS to LDFLAGS. Export HOST_LIBS.
(POSTSTAGE1_HOST_EXPORTS): Set CXX and CXX_FOR_BUILD. Add
POSTSTAGE1_LDFLAGS to LDFLAGS. Export HOST_LIBS.
(POSTSTAGE1_FLAGS_TO_PASS): Likewise.
* configure, Makefile.in: Rebuild.
gcc/:
* configure.ac: Invoke AC_PROG_CXX. Separate C specific warnings
from loose_warn into c_loose_warn and from strict_warn into
c_strict_warn. Set and substitute warn_cxxflags. Check for
--enable-build-with-cxx. Set and substitute
ENABLE_BUILD_WITH_CXX. Set and substitute HOST_LIBS.
* Makefile.in (CXXFLAGS): New variable.
(C_LOOSE_WARN, C_STRICT_WARN): New variables.
(GCC_WARN_CFLAGS): Add $(C_LOOSE_WARN). Add $(C_STRICT_WARN) if
the default is the same as $(STRICT_WARN).
(GCC_WARN_CXXFLAGS, WARN_CXXFLAGS): New variables.
(CXX): New variable.
(COMPILER): New value if ENABLE_BUILD_WITH_CXX.
(COMPILER_FLAGS, LINKER, LINKER_FLAGS): Likewise.
(ALL_COMPILERFLAGS, ALL_LINKERFLAGS): Likewise.
(HOST_LIBS): New variable.
(GCC_CFLAGS): Add $(C_LOOSE_WARN).
(ALL_CXXFLAGS): New variable.
(LIBS, BACKENDLIBS): Add $(HOST_LIBS).
* doc/install.texi (Configuration): Document
--enable-build-with-cxx, --with-stage1-ldflags,
--with-stage1-libs, --with-boot-ldflags, --with-boot-libs.
* configure: Rebuild.
From-SVN: r148889
2009-06-24 06:03:51 +02:00
[if test "$withval" = "no" -o "$withval" = "yes"; then
poststage1_libs=
else
2009-07-06 20:06:55 +02:00
poststage1_libs=$withval
configure.ac: Add --enable-build-with-cxx.
./: * configure.ac: Add --enable-build-with-cxx. When set, add c++ to
boot_languages. Only bootstrap target libraries listed in
target_libs for some boot language. Add --with-stage1-ldflags,
--with-stage1-libs, --with-boot-ldflags, --with-boot-libs. Remove
with_host_libstdcxx from ppllibs. Only add -fkeep-inline-functions
if not building with C++.
* Makefile.def: For target_module libstdc++-v3, set bootstrap=true.
* Makefile.tpl (STAGE1_LDFLAGS, STAGE1_LIBS): New variables.
(POSTSTAGE1_LDFLAGS, POSTSTAGE1_LIBS): New variables.
(HOST_EXPORTS): Add STAGE1_LDFLAGS to LDFLAGS. Export HOST_LIBS.
(POSTSTAGE1_HOST_EXPORTS): Set CXX and CXX_FOR_BUILD. Add
POSTSTAGE1_LDFLAGS to LDFLAGS. Export HOST_LIBS.
(POSTSTAGE1_FLAGS_TO_PASS): Likewise.
* configure, Makefile.in: Rebuild.
gcc/:
* configure.ac: Invoke AC_PROG_CXX. Separate C specific warnings
from loose_warn into c_loose_warn and from strict_warn into
c_strict_warn. Set and substitute warn_cxxflags. Check for
--enable-build-with-cxx. Set and substitute
ENABLE_BUILD_WITH_CXX. Set and substitute HOST_LIBS.
* Makefile.in (CXXFLAGS): New variable.
(C_LOOSE_WARN, C_STRICT_WARN): New variables.
(GCC_WARN_CFLAGS): Add $(C_LOOSE_WARN). Add $(C_STRICT_WARN) if
the default is the same as $(STRICT_WARN).
(GCC_WARN_CXXFLAGS, WARN_CXXFLAGS): New variables.
(CXX): New variable.
(COMPILER): New value if ENABLE_BUILD_WITH_CXX.
(COMPILER_FLAGS, LINKER, LINKER_FLAGS): Likewise.
(ALL_COMPILERFLAGS, ALL_LINKERFLAGS): Likewise.
(HOST_LIBS): New variable.
(GCC_CFLAGS): Add $(C_LOOSE_WARN).
(ALL_CXXFLAGS): New variable.
(LIBS, BACKENDLIBS): Add $(HOST_LIBS).
* doc/install.texi (Configuration): Document
--enable-build-with-cxx, --with-stage1-ldflags,
--with-stage1-libs, --with-boot-ldflags, --with-boot-libs.
* configure: Rebuild.
From-SVN: r148889
2009-06-24 06:03:51 +02:00
fi],
2015-08-12 17:13:35 +02:00
[poststage1_libs=])
configure.ac: Add --enable-build-with-cxx.
./: * configure.ac: Add --enable-build-with-cxx. When set, add c++ to
boot_languages. Only bootstrap target libraries listed in
target_libs for some boot language. Add --with-stage1-ldflags,
--with-stage1-libs, --with-boot-ldflags, --with-boot-libs. Remove
with_host_libstdcxx from ppllibs. Only add -fkeep-inline-functions
if not building with C++.
* Makefile.def: For target_module libstdc++-v3, set bootstrap=true.
* Makefile.tpl (STAGE1_LDFLAGS, STAGE1_LIBS): New variables.
(POSTSTAGE1_LDFLAGS, POSTSTAGE1_LIBS): New variables.
(HOST_EXPORTS): Add STAGE1_LDFLAGS to LDFLAGS. Export HOST_LIBS.
(POSTSTAGE1_HOST_EXPORTS): Set CXX and CXX_FOR_BUILD. Add
POSTSTAGE1_LDFLAGS to LDFLAGS. Export HOST_LIBS.
(POSTSTAGE1_FLAGS_TO_PASS): Likewise.
* configure, Makefile.in: Rebuild.
gcc/:
* configure.ac: Invoke AC_PROG_CXX. Separate C specific warnings
from loose_warn into c_loose_warn and from strict_warn into
c_strict_warn. Set and substitute warn_cxxflags. Check for
--enable-build-with-cxx. Set and substitute
ENABLE_BUILD_WITH_CXX. Set and substitute HOST_LIBS.
* Makefile.in (CXXFLAGS): New variable.
(C_LOOSE_WARN, C_STRICT_WARN): New variables.
(GCC_WARN_CFLAGS): Add $(C_LOOSE_WARN). Add $(C_STRICT_WARN) if
the default is the same as $(STRICT_WARN).
(GCC_WARN_CXXFLAGS, WARN_CXXFLAGS): New variables.
(CXX): New variable.
(COMPILER): New value if ENABLE_BUILD_WITH_CXX.
(COMPILER_FLAGS, LINKER, LINKER_FLAGS): Likewise.
(ALL_COMPILERFLAGS, ALL_LINKERFLAGS): Likewise.
(HOST_LIBS): New variable.
(GCC_CFLAGS): Add $(C_LOOSE_WARN).
(ALL_CXXFLAGS): New variable.
(LIBS, BACKENDLIBS): Add $(HOST_LIBS).
* doc/install.texi (Configuration): Document
--enable-build-with-cxx, --with-stage1-ldflags,
--with-stage1-libs, --with-boot-ldflags, --with-boot-libs.
* configure: Rebuild.
From-SVN: r148889
2009-06-24 06:03:51 +02:00
AC_SUBST(poststage1_libs)
2009-11-22 05:25:56 +01:00
# Linker flags to use for stage2 and later builds.
AC_ARG_WITH(boot-ldflags,
2011-01-21 14:18:23 +01:00
[AS_HELP_STRING([--with-boot-ldflags=FLAGS],
[linker flags for stage2 and later])],
2009-11-22 05:25:56 +01:00
[if test "$withval" = "no" -o "$withval" = "yes"; then
poststage1_ldflags=
else
poststage1_ldflags=$withval
fi],
[poststage1_ldflags=
2010-12-02 19:06:19 +01:00
# In stages 2 and 3, default to linking libstdc++ and libgcc
# statically. But if the user explicitly specified the libraries to
# use, trust that they are doing what they want.
if test "$poststage1_libs" = ""; then
2009-11-22 05:25:56 +01:00
poststage1_ldflags="-static-libstdc++ -static-libgcc"
fi])
AC_SUBST(poststage1_ldflags)
2015-12-17 19:50:05 +01:00
# GCC GRAPHITE dependency isl.
2014-11-11 19:54:16 +01:00
# Basic setup is inlined here, actual checks are in config/isl.m4
2012-09-03 16:40:17 +02:00
AC_ARG_WITH(isl,
[AS_HELP_STRING(
[--with-isl=PATH],
2015-12-17 19:50:05 +01:00
[Specify prefix directory for the installed isl package.
2012-09-03 16:40:17 +02:00
Equivalent to --with-isl-include=PATH/include
plus --with-isl-lib=PATH/lib])])
2014-08-18 17:42:11 +02:00
# Treat --without-isl as a request to disable
2012-09-03 16:40:17 +02:00
# GRAPHITE support and skip all following checks.
2014-08-18 17:42:11 +02:00
if test "x$with_isl" != "xno"; then
2015-12-17 19:50:05 +01:00
# Check for isl
2012-09-03 16:40:17 +02:00
dnl Provide configure switches and initialize islinc & isllibs
dnl with user input.
ISL_INIT_FLAGS
2015-12-17 19:50:05 +01:00
dnl The versions of isl that work for Graphite
2014-08-28 18:43:55 +02:00
ISL_CHECK_VERSION()
2015-12-17 19:50:05 +01:00
dnl Only execute fail-action, if isl has been requested.
2012-07-02 13:43:46 +02:00
ISL_IF_FAILED([
2015-12-17 19:50:05 +01:00
AC_MSG_ERROR([Unable to find a usable isl. See config.log for details.])])
backport: configure: Regenerate.
2008-09-02 Sebastian Pop <sebastian.pop@amd.com>
Tobias Grosser <grosser@fim.uni-passau.de>
Jan Sjodin <jan.sjodin@amd.com>
Harsha Jagasia <harsha.jagasia@amd.com>
Dwarakanath Rajagopal <dwarak.rajagopal@amd.com>
Konrad Trifunovic <konrad.trifunovic@inria.fr>
Adrien Eliche <aeliche@isty.uvsq.fr>
Merge from graphite branch.
* configure: Regenerate.
* Makefile.in: Regenerate.
* configure.ac (host_libs): Add ppl and cloog.
Add checks for PPL and CLooG.
* Makefile.def (ppl, cloog): Added modules and dependences.
* Makefile.tpl (PPLLIBS, PPLINC, CLOOGLIBS, CLOOGINC): New.
(HOST_PPLLIBS, HOST_PPLINC, HOST_CLOOGLIBS, HOST_CLOOGINC): New.
gcc/
* graphite.c: New.
* graphite.h: New.
* tree-loop-linear.c (perfect_loop_nest_depth): Export.
* doc/invoke.texi (-floop-block, -floop-interchange,
-floop-strip-mine): Document new flags.
* tree-into-ssa.c (gimple_vec): Moved...
* tree-loop-distribution.c (rdg_component): Moved...
* cfgloopmanip.c: Include tree-flow.h.
(update_dominators_in_loop): New.
(create_empty_if_region_on_edge): New.
(create_empty_loop_on_edge): New.
(loopify): Use update_dominators_in_loop.
* tree-pass.h (pass_graphite_transforms): Declared.
* configure: Regenerate.
* tree-phinodes.c (make_phi_node): Export.
(add_phi_node_to_bb): New, split from create_phi_node.
* tree-chrec.c (for_each_scev_op): New.
* tree-chrec.h (for_each_scev_op): Declared.
* tree-ssa-loop-ivopts.c (get_phi_with_result): New.
(remove_statement): Call get_phi_with_result.
* config.in (HAVE_cloog): Undef.
* gdbinit.in (pgg): New.
* timevar.def (TV_GRAPHITE_TRANSFORMS): New.
* tree-ssa-loop.c (graphite_transforms): New.
(gate_graphite_transforms): New.
(pass_graphite_transforms): New.
* configure.ac (PPLLIBS, PPLINC, CLOOGLIBS, CLOOGINC,
HAVE_cloog): Defined.
* tree-vectorizer.c (rename_variables_in_bb): Export.
* tree-data-ref.c (dr_may_alias_p): Export.
(stmt_simple_memref_p): New.
(find_data_references_in_stmt): Export.
(find_data_references_in_loop): Export.
(create_rdg_edge_for_ddr): Initialize RDGE_RELATION.
(create_rdg_edges_for_scalar): Initialize RDGE_RELATION.
(create_rdg_vertices): Export.
(build_empty_rdg): New.
(build_rdg): Call build_empty_rdg. Free dependence_relations.
* tree-data-ref.h (rdg_component): ... here.
(scop_p): New.
(struct data_reference): Add a field scop.
(DR_SCOP): New.
(find_data_references_in_loop): Declared.
(find_data_references_in_stmt): Declared.
(create_rdg_vertices): Declared.
(dr_may_alias_p): Declared.
(stmt_simple_memref_p): Declared.
(struct rdg_edge): Add a field ddr_p relation.
(build_empty_rdg): Declared.
* lambda.h (lambda_matrix): Declare a VEC of.
(find_induction_var_from_exit_cond): Declared.
(lambda_vector_compare): New.
* common.opt (fgraphite, floop-strip-mine,
floop-interchange, floop-block): New flags.
* lambda-code.c (find_induction_var_from_exit_cond): Export.
* cfgloop.c (is_loop_exit): New.
* cfgloop.h (is_loop_exit): Declared.
(create_empty_if_region_on_edge): Declared.
(create_empty_loop_on_edge): Declared.
* tree-flow.h (add_phi_node_to_bb): Declared.
(make_phi_node): Declared.
(rename_variables_in_bb): Declared.
(perfect_loop_nest_depth): Declared.
(graphite_transform_loops): Declared.
* Makefile.in (cfgloopmanip.o): Depend on TREE_FLOW_H.
(graphite.o-warn): Add -Wno-error.
(PPLLIBS, PPLINC, CLOOGLIBS, CLOOGINC): Declared.
(LIBS): Add GMPLIBS, CLOOGLIBS, PPLLIBS.
(INCLUDES): Add PPLINC, CLOOGINC.
(OBJS-common): Add graphite.o.
(graphite.o): Add rule.
* gimple.h (gimple_vec): ... here.
* tree-cfg.c (print_loops): Start printing at ENTRY_BLOCK_PTR.
* passes.c (init_optimization_passes): Schedule
pass_graphite_transforms.
testsuite/
* gcc.dg/graphite/scop-{0,1,2,3,4,5,6,7,8,9,
10,11,12,13,14,15,16,17,18}.c: New.
* gcc.dg/graphite/graphite.exp: New.
* gcc.dg/graphite/scop-matmult.c: New.
* gcc.dg/graphite/block-0.c: New.
* lib/target-supports.exp (check_effective_target_fgraphite): New.
* gfortran.dg/graphite/block-1.f90: New.
* gfortran.dg/graphite/scop-{1,2}.f: New.
* gfortran.dg/graphite/block-{1,3,4}.f90: New.
* gfortran.dg/graphite/graphite.exp: New.
Co-Authored-By: Adrien Eliche <aeliche@isty.uvsq.fr>
Co-Authored-By: Dwarakanath Rajagopal <dwarak.rajagopal@amd.com>
Co-Authored-By: Harsha Jagasia <harsha.jagasia@amd.com>
Co-Authored-By: Jan Sjodin <jan.sjodin@amd.com>
Co-Authored-By: Konrad Trifunovic <konrad.trifunovic@inria.fr>
Co-Authored-By: Tobias Grosser <grosser@fim.uni-passau.de>
From-SVN: r139893
2008-09-02 18:31:04 +02:00
fi
2015-12-17 19:50:05 +01:00
# If the isl check failed, disable builds of in-tree variant of isl
2012-09-03 16:40:17 +02:00
if test "x$with_isl" = xno ||
test "x$gcc_cv_isl" = xno; then
2014-11-11 19:54:16 +01:00
noconfigdirs="$noconfigdirs isl"
2012-09-03 16:40:17 +02:00
islinc=
2014-08-18 17:42:11 +02:00
fi
AC_SUBST(isllibs)
2012-09-03 16:40:17 +02:00
AC_SUBST(islinc)
2009-10-03 23:10:11 +02:00
# Check for LTO support.
AC_ARG_ENABLE(lto,
2011-01-21 14:18:23 +01:00
[AS_HELP_STRING([--enable-lto], [enable link time optimization support])],
2009-10-03 23:10:11 +02:00
enable_lto=$enableval,
enable_lto=yes; default_enable_lto=yes)
2010-11-03 10:14:32 +01:00
ACX_ELF_TARGET_IFELSE([# ELF platforms build the lto-plugin always.
build_lto_plugin=yes
],[if test x"$default_enable_lto" = x"yes" ; then
2010-09-03 21:49:02 +02:00
case $target in
2016-01-12 19:36:00 +01:00
*-apple-darwin9* | *-cygwin* | *-mingw* | *djgpp*) ;;
2010-11-03 10:14:32 +01:00
# On other non-ELF platforms, LTO has yet to be validated.
2010-09-03 21:49:02 +02:00
*) enable_lto=no ;;
esac
2010-04-27 04:22:40 +02:00
else
2010-09-21 16:32:36 +02:00
# Apart from ELF platforms, only Windows and Darwin support LTO so far.
# It would also be nice to check the binutils support, but we don't
2010-04-27 04:22:40 +02:00
# have gcc_GAS_CHECK_FEATURE available here. For now, we'll just
# warn during gcc/ subconfigure; unless you're bootstrapping with
# -flto it won't be needed until after installation anyway.
case $target in
2016-01-12 19:36:00 +01:00
*-cygwin* | *-mingw* | *-apple-darwin* | *djgpp*) ;;
2010-04-27 04:22:40 +02:00
*) if test x"$enable_lto" = x"yes"; then
AC_MSG_ERROR([LTO support is not enabled for this target.])
fi
;;
esac
fi
2010-10-07 22:28:59 +02:00
# Among non-ELF, only Windows platforms support the lto-plugin so far.
2010-11-03 10:14:32 +01:00
# Build it unless LTO was explicitly disabled.
2010-10-07 22:28:59 +02:00
case $target in
2010-11-03 10:14:32 +01:00
*-cygwin* | *-mingw*) build_lto_plugin=$enable_lto ;;
2010-10-07 22:28:59 +02:00
*) ;;
esac
2010-11-03 10:14:32 +01:00
])
2009-10-03 23:10:11 +02:00
2014-06-13 16:32:16 +02:00
AC_ARG_ENABLE(linker-plugin-configure-flags,
[AS_HELP_STRING([[--enable-linker-plugin-configure-flags=FLAGS]],
[additional flags for configuring linker plugins @<:@none@:>@])],
extra_linker_plugin_configure_flags=$enableval,
extra_linker_plugin_configure_flags=)
AC_SUBST(extra_linker_plugin_configure_flags)
AC_ARG_ENABLE(linker-plugin-flags,
[AS_HELP_STRING([[--enable-linker-plugin-flags=FLAGS]],
[additional flags for configuring and building linker plugins @<:@none@:>@])],
extra_linker_plugin_flags=$enableval,
extra_linker_plugin_flags=)
AC_SUBST(extra_linker_plugin_flags)
backport: configure: Regenerate.
2008-09-02 Sebastian Pop <sebastian.pop@amd.com>
Tobias Grosser <grosser@fim.uni-passau.de>
Jan Sjodin <jan.sjodin@amd.com>
Harsha Jagasia <harsha.jagasia@amd.com>
Dwarakanath Rajagopal <dwarak.rajagopal@amd.com>
Konrad Trifunovic <konrad.trifunovic@inria.fr>
Adrien Eliche <aeliche@isty.uvsq.fr>
Merge from graphite branch.
* configure: Regenerate.
* Makefile.in: Regenerate.
* configure.ac (host_libs): Add ppl and cloog.
Add checks for PPL and CLooG.
* Makefile.def (ppl, cloog): Added modules and dependences.
* Makefile.tpl (PPLLIBS, PPLINC, CLOOGLIBS, CLOOGINC): New.
(HOST_PPLLIBS, HOST_PPLINC, HOST_CLOOGLIBS, HOST_CLOOGINC): New.
gcc/
* graphite.c: New.
* graphite.h: New.
* tree-loop-linear.c (perfect_loop_nest_depth): Export.
* doc/invoke.texi (-floop-block, -floop-interchange,
-floop-strip-mine): Document new flags.
* tree-into-ssa.c (gimple_vec): Moved...
* tree-loop-distribution.c (rdg_component): Moved...
* cfgloopmanip.c: Include tree-flow.h.
(update_dominators_in_loop): New.
(create_empty_if_region_on_edge): New.
(create_empty_loop_on_edge): New.
(loopify): Use update_dominators_in_loop.
* tree-pass.h (pass_graphite_transforms): Declared.
* configure: Regenerate.
* tree-phinodes.c (make_phi_node): Export.
(add_phi_node_to_bb): New, split from create_phi_node.
* tree-chrec.c (for_each_scev_op): New.
* tree-chrec.h (for_each_scev_op): Declared.
* tree-ssa-loop-ivopts.c (get_phi_with_result): New.
(remove_statement): Call get_phi_with_result.
* config.in (HAVE_cloog): Undef.
* gdbinit.in (pgg): New.
* timevar.def (TV_GRAPHITE_TRANSFORMS): New.
* tree-ssa-loop.c (graphite_transforms): New.
(gate_graphite_transforms): New.
(pass_graphite_transforms): New.
* configure.ac (PPLLIBS, PPLINC, CLOOGLIBS, CLOOGINC,
HAVE_cloog): Defined.
* tree-vectorizer.c (rename_variables_in_bb): Export.
* tree-data-ref.c (dr_may_alias_p): Export.
(stmt_simple_memref_p): New.
(find_data_references_in_stmt): Export.
(find_data_references_in_loop): Export.
(create_rdg_edge_for_ddr): Initialize RDGE_RELATION.
(create_rdg_edges_for_scalar): Initialize RDGE_RELATION.
(create_rdg_vertices): Export.
(build_empty_rdg): New.
(build_rdg): Call build_empty_rdg. Free dependence_relations.
* tree-data-ref.h (rdg_component): ... here.
(scop_p): New.
(struct data_reference): Add a field scop.
(DR_SCOP): New.
(find_data_references_in_loop): Declared.
(find_data_references_in_stmt): Declared.
(create_rdg_vertices): Declared.
(dr_may_alias_p): Declared.
(stmt_simple_memref_p): Declared.
(struct rdg_edge): Add a field ddr_p relation.
(build_empty_rdg): Declared.
* lambda.h (lambda_matrix): Declare a VEC of.
(find_induction_var_from_exit_cond): Declared.
(lambda_vector_compare): New.
* common.opt (fgraphite, floop-strip-mine,
floop-interchange, floop-block): New flags.
* lambda-code.c (find_induction_var_from_exit_cond): Export.
* cfgloop.c (is_loop_exit): New.
* cfgloop.h (is_loop_exit): Declared.
(create_empty_if_region_on_edge): Declared.
(create_empty_loop_on_edge): Declared.
* tree-flow.h (add_phi_node_to_bb): Declared.
(make_phi_node): Declared.
(rename_variables_in_bb): Declared.
(perfect_loop_nest_depth): Declared.
(graphite_transform_loops): Declared.
* Makefile.in (cfgloopmanip.o): Depend on TREE_FLOW_H.
(graphite.o-warn): Add -Wno-error.
(PPLLIBS, PPLINC, CLOOGLIBS, CLOOGINC): Declared.
(LIBS): Add GMPLIBS, CLOOGLIBS, PPLLIBS.
(INCLUDES): Add PPLINC, CLOOGINC.
(OBJS-common): Add graphite.o.
(graphite.o): Add rule.
* gimple.h (gimple_vec): ... here.
* tree-cfg.c (print_loops): Start printing at ENTRY_BLOCK_PTR.
* passes.c (init_optimization_passes): Schedule
pass_graphite_transforms.
testsuite/
* gcc.dg/graphite/scop-{0,1,2,3,4,5,6,7,8,9,
10,11,12,13,14,15,16,17,18}.c: New.
* gcc.dg/graphite/graphite.exp: New.
* gcc.dg/graphite/scop-matmult.c: New.
* gcc.dg/graphite/block-0.c: New.
* lib/target-supports.exp (check_effective_target_fgraphite): New.
* gfortran.dg/graphite/block-1.f90: New.
* gfortran.dg/graphite/scop-{1,2}.f: New.
* gfortran.dg/graphite/block-{1,3,4}.f90: New.
* gfortran.dg/graphite/graphite.exp: New.
Co-Authored-By: Adrien Eliche <aeliche@isty.uvsq.fr>
Co-Authored-By: Dwarakanath Rajagopal <dwarak.rajagopal@amd.com>
Co-Authored-By: Harsha Jagasia <harsha.jagasia@amd.com>
Co-Authored-By: Jan Sjodin <jan.sjodin@amd.com>
Co-Authored-By: Konrad Trifunovic <konrad.trifunovic@inria.fr>
Co-Authored-By: Tobias Grosser <grosser@fim.uni-passau.de>
From-SVN: r139893
2008-09-02 18:31:04 +02:00
backport: As described in http://gcc.gnu.org/ml/gcc/2012-08/msg00015.html...
Merge from cxx-conversion branch (http://gcc.gnu.org/wiki/cxx-conversion).
As described in http://gcc.gnu.org/ml/gcc/2012-08/msg00015.html, this patch
changes the default bootstrap process so that stage 1 always builds with a C++
compiler.
Other than the bootstrap change, the patch makes no functional changes to the
compiler. Everything should build as it does now in trunk. The main
changes in this patch are:
1- Configuration changes.
2- Re-write of VEC.
3- Re-write of gengtype to support C++ templates and
user-provided marking functions.
4- New hash table class.
5- Re-write double_int.
6- Implement tree macros as inline functions so they can be
called from gdb.
As discussed before, several of these changes do not fully change
the call sites to use the new APIs.
The bootstrap changes have already been tested on a wide range of
targets (http://gcc.gnu.org/wiki/CppBuildStatus). Additionally,
I have tested the merged trunk on: x86_64-unknown-linux-gnu,
mips64el-unknown-linux-gnu, powerpc64-unknown-linux-gnu,
i686-pc-linux-gnu, and ia64-unknown-linux-gnu.
ChangeLog
2012-08-14 Diego Novillo <dnovillo@google.com>
Merge from cxx-conversion branch.
* Makefile.tpl (STAGE[+id+]_CXXFLAGS): Remove
POSTSTAGE1_CONFIGURE_FLAGS.
* Makefile.in: Regenerate.
* configure.ac (ENABLE_BUILD_WITH_CXX): Remove. Update all users.
Force C++ when bootstrapping.
* configure: Regenerate.
libcpp/ChangeLog
2012-08-14 Diego Novillo <dnovillo@google.com>
Merge from cxx-conversion branch. Configury.
* Makefile.in: Remove all handlers of ENABLE_BUILD_WITH_CXX.
* configure.ac: Likewise.
* configure: Regenerate.
2012-08-14 Lawrence Crowl <crowl@google.com>
Merge from cxx-conversion branch. New C++ hash table.
* include/symtab.h (typedef struct ht hash_table): Change the typedef
name to cpp_hash_table. Update all users of the typedef.
gcc/ChangeLog
2012-08-14 Diego Novillo <dnovillo@google.com>
Merge from cxx-conversion branch. Configury.
* configure.ac (CXX_FOR_BUILD): Define and substitute.
(BUILD_CXXFLAGS): Define.
Remove all handlers of ENABLE_BUILD_WITH_CXX.
Force all build to be with C++.
* Makefile.in (BUILD_CXXFLAGS): Use it.
Remove all handlers of ENABLE_BUILD_WITH_CXX.
* configure: Regenerate.
* config.in: Regenerate.
* doc/install.texi: Remove documentation for --enable-build-with-cxx
and --enable-build-poststage1-with-cxx.
2012-08-14 Diego Novillo <dnovillo@google.com>
Merge from cxx-conversion branch. Re-implement VEC in C++.
* vec.c (vec_heap_free): Convert into a template function.
(vec_gc_o_reserve_1): Make extern.
(vec_gc_p_reserve): Remove.
(vec_gc_p_reserve_exact): Remove.
(vec_gc_o_reserve): Remove.
(vec_gc_o_reserve_exact): Remove.
(vec_heap_o_reserve_1): Make extern.
(vec_heap_p_reserve): Remove.
(vec_heap_p_reserve_exact): Remove.
(vec_heap_o_reserve): Remove.
(vec_heap_o_reserve_exact): Remove.
(vec_stack_p_reserve): Remove.
(vec_stack_p_reserve_exact): Remove.
* vec.h (VEC_CHECK_INFO, VEC_CHECK_DECL, VEC_CHECK_PASS,
VEC_ASSERT, VEC_ASSERT_FAIL, vec_assert_fail): Move earlier
in the file.
(VEC): Define to vec_t<T>.
(vec_allocation_t): Define.
(struct vec_prefix): Move earlier in the file.
(vec_t<T>): New template.
(DEF_VEC_I, DEF_VECL_ALLOC_I, DEF_VEC_P, DEF_VEC_ALLOC_P,
DEF_VEC_O, DEF_VEC_ALLOC_P, DEF_VEC_O, DEF_VEC_ALLOC_O,
DEF_VEC_ALLOC_P_STACK, DEF_VEC_ALLOC_O_STACK,
DEF_VEC_ALLOC_I_STACK): Expand to 'struct vec_swallow_trailing_semi'.
(DEF_VEC_A): Provide template instantiations for
GC/PCH markers that do not traverse the vector.
(vec_stack_p_reserve): Remove.
(vec_stack_p_reserve_exact): Remove.
(vec_stack_p_reserve_exact_1): Remove.
(vec_stack_o_reserve): Remove.
(vec_stack_o_reserve_exact): Remove.
(vec_stack_free): Re-write as a template function.
(vec_reserve): New template function.
(vec_reserve_exact): New template function.
(vec_heap_free): New template function if GATHER_STATISTICS is
defined. Otherwise, macro that expands to free().
(VEC_length_1): New template function.
(VEC_length): Call it.
(VEC_empty_1): New template function.
(VEC_empty): Call it.
(VEC_address_1): New template function.
(VEC_address): Call it.
(VEC_last_1): New template function.
(VEC_last): Call it. Change return type to T&.
Change all users that used VEC_Os.
(VEC_index_1): New template function.
(VEC_index): Call it. Return a T& instead of a T*.
Update all callers that were using VEC_O before.
(VEC_iterate_1): New template function.
(VEC_iterate): Call it.
(VEC_embedded_size_1): New template function.
(VEC_embedded_size): Call it.
(VEC_embedded_init_1): New template function.
(VEC_embedded_init): Call it.
(VEC_alloc_1): New template function.
(VEC_alloc): Call it. If A is 'stack', call XALLOCAVAR to
do the allocation.
(VEC_free_1): New template function.
(VEC_free): Call it.
(VEC_copy_1): New template function.
(VEC_copy): Call it.
(VEC_space_1): New template function
(VEC_space): Call it.
(VEC_reserve_1): New template function.
(VEC_reserve): Call it.
(VEC_reserve_exact_1): New template function.
(VEC_reserve_exact): Call it.
(VEC_splice_1): New template function.
(VEC_splice): Call it.
(VEC_safe_splice_1): New template function.
(VEC_safe_splice): Call it.
(VEC_quick_push_1): New template function. Create two overloads, one
accepting T, the other accepting T *. Update all callers
where T and T * are ambiguous.
(VEC_quick_push): Call it.
(VEC_safe_push_1): New template function. Create two overloads, one
accepting T, the other accepting T *. Update all callers
where T and T * are ambiguous.
(VEC_safe_push): Call it.
(VEC_pop_1): New template function.
(VEC_pop): Call it.
(VEC_truncate_1): New template function.
(VEC_truncate): Call it.
(VEC_safe_grow_1): New template function.
(VEC_safe_grow): Call it.
(VEC_safe_grow_cleared_1): New template function.
(VEC_safe_grow_cleared): Call it.
(VEC_replace_1): New template function.
(VEC_replace): Call it. Always accept T instead of T*.
Update all callers that used VEC_Os.
(VEC_quick_insert_1): New template function.
(VEC_quick_insert): Call it.
(VEC_safe_insert_1): New template function.
(VEC_safe_insert): Call it.
(VEC_ordered_remove_1): New template function.
(VEC_ordered_remove): Call it.
(VEC_unordered_remove_1): New template function.
(VEC_unordered_remove): Call it.
(VEC_block_remove_1): New template function.
(VEC_block_remove): Call it.
(VEC_lower_bound_1): New template function.
(VEC_lower_bound): Call it.
(VEC_OP): Remove.
(DEF_VEC_FUNC_P): Remove.
(DEF_VEC_ALLOC_FUNC_P): Remove.
(DEF_VEC_NONALLOC_FUNCS_P): Remove.
(DEF_VEC_FUNC_O): Remove.
(DEF_VEC_ALLOC_FUNC_O): Remove.
(DEF_VEC_NONALLOC_FUNCS_O): Remove.
(DEF_VEC_ALLOC_FUNC_I): Remove.
(DEF_VEC_NONALLOC_FUNCS_I): Remove.
(DEF_VEC_ALLOC_FUNC_P_STACK): Remove.
(DEF_VEC_ALLOC_FUNC_O_STACK): Remove.
(DEF_VEC_ALLOC_FUNC_I_STACK): Remove.
(vec_reserve_exact): New template function.
* gengtype-lex.l (DEF_VEC_ALLOC_[IOP]/{EOID}): Remove.
* gengtype-parse.c (token_names): Remove DEF_VEC_ALLOC_[IOP].
(typedef_name): Emit vec_t<C1> instead of VEC_C1_C2.
(def_vec_alloc): Remove. Update all callers.
* gengtype.c (filter_type_name): New.
(output_mangled_typename): Call it.
(write_func_for_structure): Likewise.
(write_types): Likewise.
(write_root): Likewise.
(write_typed_alloc_def): Likewise.
(note_def_vec): Emit vec_t<TYPE_NAME> instead of VEC_TYPE_NAME_base.
(note_def_vec_alloc): Remove.
* gengtype.h (note_def_vec_alloc): Remove.
(DEFVEC_ALLOC): Remove token code.
* df-scan.c (df_bb_verify): Remove call to df_free_collection_rec
inside the insn traversal loop.
* gimplify.c (gimplify_compound_lval): Rename STACK to EXPR_STACK.
* ipa-inline.c (inline_small_functions): Rename HEAP to EDGE_HEAP.
* reg-stack.c (stack): Rename to STACK_PTR. Update all users.
* tree-vrp.c (stack): Rename to EQUIV_STACK. Update all users.
* config/bfin/bfin.c (hwloop_optimize): Update some calls to
VEC_* for vectors of non-pointers.
* config/c6x/c6x.c (try_rename_operands): Likewise.
(reshuffle_units): Likewise.
* config/mips/mips.c (mips_multi_start): Likewise.
(mips_multi_add): Likewise.
(mips_multi_copy_insn): Likewise.
(mips_multi_set_operand): Likewise.
* hw-doloop.c (discover_loop): Likewise.
(discover_loops): Likewise.
(reorg_loops): Likewise.
2012-08-14 Diego Novillo <dnovillo@google.com>
Merge from cxx-conversion branch. C++ support in gengtype.
* coretypes.h (gt_pointer_operator): Move from ...
* ggc.h: ... here.
* doc/gty.texi: Document support for C++ templates and
user-provided markers.
* gcc/gengtype-lex.l: Update copyright year.
Remove support for recognizing DEF_VEC_O, DEF_VEC_P and
DEFVEC_I.
* gengtype-parse.c: Update copyright year.
(token_names): Remove DEF_VEC_O, DEF_VEC_P and DEF_VEC_I.
(require_template_declaration): New.
(typedef_name): Call it.
(type): Replace IS_UNION with KIND. Replace all users.
(def_vec): Remove. Update all users.
* gengtype-state.c (type_lineloc): Handle TYPE_USER_STRUCT.
(write_state_user_struct_type): New.
(write_state_type): Call it.
(read_state_user_struct_type): New.
(read_state_type): Call it.
* gengtype.c: Update copyright year.
(dump_pair): Move declaration to the top.
(dump_type): Likewise.
(dump_type_list): Likewise.
(dbgprint_count_type_at): Handle TYPE_USER_STRUCT.
(create_user_defined_type): New.
(resolve_typedef): Call it.
(new_structure): Replace argument ISUNION with KIND.
Change users to refer to KIND directly.
Update all callers.
(find_structure): Likewise.
(set_gc_used_type): Handle TYPE_USER_STRUCT.
(create_file): Update HDR to include new copyright year.
(struct walk_type_data): Add field IN_PTR_FIELD.
(output_mangled_typename): Handle TYPE_USER_STRUCT.
(walk_type): Set D->IN_PTR_FIELD when walking a TYPE_POINTER.
Clear it afterwards.
Handle TYPE_USER_STRUCT.
(write_types_process_field): Handle TYPE_USER_STRUCT.
(get_type_specifier): Move earlier in the file.
(write_type_decl): New.
(write_marker_function_name): New.
(write_user_func_for_structure_ptr): New.
(write_user_func_for_structure_body): New.
(write_user_marking_functions): New.
(write_func_for_structure): Call write_marker_function_name
and write_type_decl.
Do not call walk_type for TYPE_USER_STRUCT. Emit a call to the user
function directly.
Call write_user_marking_functions on TYPE_USER_STRUCTs.
(write_types_local_user_process_field): New.
(write_pch_user_walking_for_structure_body): New.
(write_pch_user_walking_functions): New.
(write_types_local_process_field): Handle TYPE_USER_STRUCT.
(write_local_func_for_structure): Do not call walk_type for
TYPE_USER_STRUCT. Instead, emit the call to gt_pch_nx directly.
Call write_pch_user_walking_functions for TYPE_USER_STRUCTs.
(write_root): Handle TYPE_USER_STRUCT.
(vec_prefix_type): Remove. Update all users.
(note_def_vec): Remove. Update all users.
(dump_typekind): Handle TYPE_USER_STRUCT.
(dump_type): Initialize SEEN_TYPES, if needed.
Handle TYPE_USER_STRUCT.
(dump_everything): Do not initialize SEEN_TYPES.
* gengtype.h: Update copyright year.
(enum typekind): Add TYPE_USER_STRUCT.
(union_or_struct_p): Rename from UNION_OR_STRUCT_P.
Convert into function.
Add an overload taking const_type_p.
Update all callers.
(new_structure): Change second field to type enum typekind.
Update all users.
(find_structure): Likewise.
(note_def_vec): Remove.
(DEFVEC_OP): Remove.
(DEFVEC_I): Remove.
* ggc-page.c (gt_ggc_mx): Add entry points for marking
'const char *&', 'unsigned char *&' and 'unsigned char&'.
* ggc-zone.c (gt_ggc_mx): Add entry points for marking
'const char *&' and 'unsigned char *&'.
* stringpool.c (gt_pch_nx): Add entry points for marking
'const char *&', 'unsigned char *&' and 'unsigned char&'.
Add an entry point for the overload taking arguments 'unsigned char
*', 'gt_pointer_operator' and 'void *'.
* vec.h (struct vec_prefix): Remove GTY marker.
(struct vec_t): Remove GTY((length)) attribute from field 'vec'.
(gt_ggc_mx (vec_t<T> *)): New template function.
(gt_pch_nx (vec_t<T> *)): New template function.
(gt_pch_nx (vec_t<T *> *, gt_pointer_operator, void *)): New template
function.
(gt_pch_nx (vec_t<T> *, gt_pointer_operator, void *)): New template
function.
* basic-block.h (struct edge_def): Mark GTY((user)).
Remove all GTY markers from fields.
(gt_ggc_mx): Declare.
(gt_pch_nx): Declare.
* tree-cfg.c (gt_ggc_mx): New.
(gt_pch_nx): New.
* gengtype-lex.l (USER_GTY): Add pattern for "user".
* gengtype-parse.c (option): Handle USER_GTY.
(opts_have): New.
(type): Call it.
If the keyword 'user' is used, do not walk the fields
of the structure.
* gengtype.h (USER_GTY): Add.
* doc/gty.texi: Update.
2012-08-14 Lawrence Crowl <crowl@google.com>
Merge cxx-conversion branch. Implement C++ hash table.
* hash-table.h: New. Implementation borrowed from libiberty/hashtab.c.
* hash-table.c: Likewise.
* tree-ssa-tail-merge.c: Include hash-table.h instead of hashtab.h.
(static htab_t same_succ_htab): Change type to hash_table;
move specification of helper functions from create call to declaration.
Change users to invoke member functions.
(same_succ_print_traverse): Make extern ssa_.... Change callers.
Remove void* casting.
(same_succ_hash): Likewise.
(same_succ_equal): Likewise.
(same_succ_delete): Likewise.
* tree-ssa-threadupdate.c: Include hash-table.h.
(struct local_info): Rename to ssa_local_info_t to avoid overloading
the type name local_info with the variable name local_info.
(static htab_t redirection_data): Change type to hash_table.
Move specification of helper functions from create call to declaration.
Change users to invoke member functions.
(redirection_data_hash): Make extern ssa_.... Change callers.
Remove void* casting.
(redirection_data_eq): Likewise.
(fix_duplicate_block_edges): Likewise.
(create_duplicates): Likewise.
(fixup_template_block): Likewise.
(redirect_edges): Likewise.
(lookup_redirection_data): Change types associated with the hash table
from void* to their actual type. Remove unnecessary casts.
* tree-ssa-ccp.c: Include hash-table.h.
(typedef gimple_htab): New. Uses hash_table. Replace specific uses
of htab_t with gimple_htab. Change users to invoke member functions.
Move specification of helper functions from create call to declaration.
* tree-ssa-coalesce.c: Include hash-table.h instead of hashtab.h.
(hash_ssa_name_by_var): Make extern. Remove void* casting.
(eq_ssa_name_by_var): Likewise.
(coalesce_ssa_name): Change type of local static htab_t ssa_name_hash
to hash_table. Change users to invoke member functions.
Move specification of helper functions from create call to declaration.
* coverage.c: Include hash-table.h instead of hashtab.h.
(static htab_t counts_hash): Change type to hash_table;
move specification of helper functions from create call to declaration.
Change users to invoke member functions.
(htab_counts_entry_hash): Make extern. Rename with coverage_... instead
of htab_... Remove void* casting.
(htab_counts_entry_eq): Likewise.
(htab_counts_entry_del): Likewise.
* tree-ssa-pre.c: Include hash-table.h instead of hashtab.h.
(static htab_t expression_to_id): Change type to hash_table.
Move specification of helper functions from create call to declaration.
Change users to invoke member functions.
(static htab_t phi_translate_table): Likewise.
(pre_expr_eq): Make extern ssa_.... Change callers.
Remove void* casting.
(pre_expr_hash): Likewise.
(expr_pred_trans_hash): Likewise.
(expr_pred_trans_eq): Likewise.
(alloc_expression_id): Change types associated with the hash table
from void* to their actual type. Remove unnecessary casts.
(lookup_expression_id): Likewise.
(phi_trans_lookup): Likewise.
(phi_trans_add): Likewise.
* stringpool.c: Rename uses of libcpp typedef hash_table to
cpp_hash_table.
* Makefile.in: Add hash-table.o to OBJS-libcommon-target.
Add $(HASH_TABLE_H). Add new dependences on $(HASH_TABLE_H).
2012-08-14 Lawrence Crowl <crowl@google.com>
Merge from cxx-conversion branch. Re-write double_int in C++.
* hash-table.h
(typedef double_int): Change to struct (POD).
(double_int::make): New overloads for int to double-int conversion.
(double_int::mask): New.
(double_int::max_value): New.
(double_int::min_value): New.
(double_int::operator ++): New.
(double_int::operator --): New.
(double_int::operator *=): New.
(double_int::operator +=): New.
(double_int::operator -=): New.
(double_int::to_signed): New.
(double_int::to_unsigned): New.
(double_int::fits_unsigned): New.
(double_int::fits_signed): New.
(double_int::fits): New.
(double_int::trailing_zeros): New.
(double_int::popcount): New.
(double_int::multiple_of): New.
(double_int::set_bit): New.
(double_int::mul_with_sign): New.
(double_int::operator * (binary)): New.
(double_int::operator + (binary)): New.
(double_int::operator - (binary)): New.
(double_int::operator - (unary)): New.
(double_int::operator ~ (unary)): New.
(double_int::operator & (binary)): New.
(double_int::operator | (binary)): New.
(double_int::operator ^ (binary)): New.
(double_int::and_not): New.
(double_int::lshift): New.
(double_int::rshift): New.
(double_int::alshift): New.
(double_int::arshift): New.
(double_int::llshift): New.
(double_int::lrshift): New.
(double_int::lrotate): New.
(double_int::rrotate): New.
(double_int::div): New.
(double_int::sdiv): New.
(double_int::udiv): New.
(double_int::mod): New.
(double_int::smod): New.
(double_int::umod): New.
(double_int::divmod): New.
(double_int::sdivmod): New.
(double_int::udivmod): New.
(double_int::ext): New.
(double_int::zext): New.
(double_int::sext): New.
(double_int::is_zero): New.
(double_int::is_one): New.
(double_int::is_minus_one): New.
(double_int::is_negative): New.
(double_int::cmp): New.
(double_int::ucmp): New.
(double_int::scmp): New.
(double_int::ult): New.
(double_int::ugt): New.
(double_int::slt): New.
(double_int::sgt): New.
(double_int::max): New.
(double_int::smax): New.
(double_int::umax): New.
(double_int::min): New.
(double_int::smin): New.
(double_int::umin): New.
(double_int::operator ==): New.
(double_int::operator !=): New.
(shwi_to_double_int): Change implementation to use member function.
(double_int_minus_one): Likewise.
(double_int_zero): Likewise.
(double_int_one): Likewise.
(double_int_two): Likewise.
(double_int_ten): Likewise.
(uhwi_to_double_int): Likewise.
(double_int_to_shwi): Likewise.
(double_int_to_uhwi): Likewise.
(double_int_fits_in_uhwi_p): Likewise.
(double_int_fits_in_shwi_p): Likewise.
(double_int_fits_in_hwi_p): Likewise.
(double_int_mul): Likewise.
(double_int_mul_with_sign): Likewise.
(double_int_add): Likewise.
(double_int_sub): Likewise.
(double_int_neg): Likewise.
(double_int_div): Likewise.
(double_int_sdiv): Likewise.
(double_int_udiv): Likewise.
(double_int_mod): Likewise.
(double_int_smod): Likewise.
(double_int_umod): Likewise.
(double_int_divmod): Likewise.
(double_int_sdivmod): Likewise.
(double_int_udivmod): Likewise.
(double_int_multiple_of): Likewise.
(double_int_setbit): Likewise.
(double_int_ctz): Likewise.
(double_int_not): Likewise.
(double_int_ior): Likewise.
(double_int_and): Likewise.
(double_int_and_not): Likewise.
(double_int_xor): Likewise.
(double_int_lshift): Likewise.
(double_int_rshift): Likewise.
(double_int_lrotate): Likewise.
(double_int_rrotate): Likewise.
(double_int_cmp): Likewise.
(double_int_scmp): Likewise.
(double_int_ucmp): Likewise.
(double_int_max): Likewise.
(double_int_smax): Likewise.
(double_int_umax): Likewise.
(double_int_min): Likewise.
(double_int_smin): Likewise.
(double_int_umin): Likewise.
(double_int_ext): Likewise.
(double_int_sext): Likewise.
(double_int_zext): Likewise.
(double_int_mask): Likewise.
(double_int_max_value): Likewise.
(double_int_min_value): Likewise.
(double_int_zero_p): Likewise.
(double_int_one_p): Likewise.
(double_int_minus_one_p): Likewise.
(double_int_equal_p): Likewise.
(double_int_popcount): Likewise.
* hash-table.c
(double_int_mask): Reuse implementation for double_int::mask.
(double_int_max_value): Likewise.
(double_int_min_value): Likewise.
(double_int_ext): Likewise.
(double_int_zext): Likewise.
(double_int_sext): Likewise.
(double_int_mul_with_sign): Likewise.
(double_int_divmod): Likewise.
(double_int_sdivmod): Likewise.
(double_int_udivmod): Likewise.
(double_int_div): Likewise.
(double_int_sdiv): Likewise.
(double_int_udiv): Likewise.
(double_int_mod): Likewise.
(double_int_smod): Likewise.
(double_int_umod): Likewise.
(double_int_multiple_of): Likewise.
(double_int_lshift): Likewise.
(double_int_rshift): Likewise.
(double_int_lrotate): Likewise.
(double_int_rrotate): Likewise.
(double_int_cmp): Likewise.
(double_int_ucmp): Likewise.
(double_int_scmp): Likewise.
(double_int_max): Likewise.
(double_int_smax): Likewise.
(double_int_umax): Likewise.
(double_int_min): Likewise.
(double_int_smin): Likewise.
(double_int_umin): Likewise.
(double_int_min): Likewise.
(double_int_min): Likewise.
(double_int_min): Likewise.
(double_int_min): Likewise.
(double_int_min): Likewise.
(double_int_min): Likewise.
(double_int::alshift): New.
(double_int::arshift): New.
(double_int::llshift): New.
(double_int::lrshift): New.
(double_int::ult): New.
(double_int::ugt): New.
(double_int::slt): New.
(double_int::sgt): New.
(double_int_setbit): Reuse implementation for double_int::set_bit,
which avoids a name conflict with a macro.
(double_int_double_int_ctz): Reuse implementation for
double_int::trailing_zeros.
(double_int_fits_in_shwi_p): Reuse implementation for
double_int::fits_signed.
(double_int_fits_in_hwi_p): Reuse implementation for double_int::fits.
(double_int_mul): Reuse implementation for binary
double_int::operator *.
(double_int_add): Likewise.
(double_int_sub): Likewise.
(double_int_neg): Reuse implementation for unary
double_int::operator -.
(double_int_max_value): Likewise.
* fixed-value.c: Change to use member functions introduced above.
2012-08-14 Lawrence Crowl <crowl@google.com>
Merge cxx-conversion branch. Support tree macro calling
from gdb.
* tree.h (tree_check): New.
(TREE_CHECK): Use inline function above instead of __extension__.
(tree_not_check): New.
(TREE_NOT_CHECK): Use inline function above instead of __extension__.
(tree_check2): New.
(TREE_CHECK2): Use inline function above instead of __extension__.
(tree_not_check2): New.
(TREE_NOT_CHECK2): Use inline function above instead of __extension__.
(tree_check3): New.
(TREE_CHECK3): Use inline function above instead of __extension__.
(tree_not_check3): New.
(TREE_NOT_CHECK3): Use inline function above instead of __extension__.
(tree_check4): New.
(TREE_CHECK4): Use inline function above instead of __extension__.
(tree_not_check4): New.
(TREE_NOT_CHECK4): Use inline function above instead of __extension__.
(tree_check5): New.
(TREE_CHECK5): Use inline function above instead of __extension__.
(tree_not_check5): New.
(TREE_NOT_CHECK5): Use inline function above instead of __extension__.
(contains_struct_check): New.
(CONTAINS_STRUCT_CHECK): Use inline function above instead of
__extension__.
(tree_class_check): New.
(TREE_CLASS_CHECK): Use inline function above instead of __extension__.
(tree_range_check): New.
(TREE_RANGE_CHECK): Use inline function above instead of __extension__.
(omp_clause_subcode_check): New.
(OMP_CLAUSE_SUBCODE_CHECK): Use inline function above instead of
__extension__.
(omp_clause_range_check): New.
(OMP_CLAUSE_RANGE_CHECK): Use inline function above instead of
__extension__.
(expr_check): New.
(EXPR_CHECK): Use inline function above instead of __extension__.
(non_type_check): New.
(NON_TYPE_CHECK): Use inline function above instead of __extension__.
(tree_vec_elt_check): New.
(TREE_VEC_ELT_CHECK): Use inline function above instead of
__extension__.
(omp_clause_elt_check): New.
(OMP_CLAUSE_ELT_CHECK): Use inline function above instead of
__extension__.
(tree_operand_check): New.
(TREE_OPERAND_CHECK): Use inline function above instead of
__extension__.
(tree_operand_check_code): New.
(TREE_OPERAND_CHECK_CODE): Use inline function above instead of
__extension__.
(TREE_CHAIN): Simplify implementation.
(TREE_TYPE): Simplify implementation.
(tree_operand_length): Move for compilation dependences.
* gdbinit.in: (macro define __FILE__): New.
(macro define __LINE__): New.
(skip "tree.h"): New.
gcc/cp/ChangeLog
2012-08-14 Diego Novillo <dnovillo@google.com>
Merge from cxx-conversion branch. Re-write VEC in C++.
* call.c (add_function_candidate): Remove const qualifier
from call to VEC_index.
2012-08-14 Diego Novillo <dnovillo@google.com>
Merge from cxx-conversion branch. Configury.
* go-c.h: Remove all handlers of ENABLE_BUILD_WITH_CXX.
* go-gcc.cc: Likewise.
* go-system.h: Likewise.
From-SVN: r190402
2012-08-15 03:56:07 +02:00
# By default, C and C++ are the only stage 1 languages.
2006-12-29 17:58:48 +01:00
stage1_languages=,c,
2004-03-16 01:03:30 +01:00
configure.ac: Add --enable-build-with-cxx.
./: * configure.ac: Add --enable-build-with-cxx. When set, add c++ to
boot_languages. Only bootstrap target libraries listed in
target_libs for some boot language. Add --with-stage1-ldflags,
--with-stage1-libs, --with-boot-ldflags, --with-boot-libs. Remove
with_host_libstdcxx from ppllibs. Only add -fkeep-inline-functions
if not building with C++.
* Makefile.def: For target_module libstdc++-v3, set bootstrap=true.
* Makefile.tpl (STAGE1_LDFLAGS, STAGE1_LIBS): New variables.
(POSTSTAGE1_LDFLAGS, POSTSTAGE1_LIBS): New variables.
(HOST_EXPORTS): Add STAGE1_LDFLAGS to LDFLAGS. Export HOST_LIBS.
(POSTSTAGE1_HOST_EXPORTS): Set CXX and CXX_FOR_BUILD. Add
POSTSTAGE1_LDFLAGS to LDFLAGS. Export HOST_LIBS.
(POSTSTAGE1_FLAGS_TO_PASS): Likewise.
* configure, Makefile.in: Rebuild.
gcc/:
* configure.ac: Invoke AC_PROG_CXX. Separate C specific warnings
from loose_warn into c_loose_warn and from strict_warn into
c_strict_warn. Set and substitute warn_cxxflags. Check for
--enable-build-with-cxx. Set and substitute
ENABLE_BUILD_WITH_CXX. Set and substitute HOST_LIBS.
* Makefile.in (CXXFLAGS): New variable.
(C_LOOSE_WARN, C_STRICT_WARN): New variables.
(GCC_WARN_CFLAGS): Add $(C_LOOSE_WARN). Add $(C_STRICT_WARN) if
the default is the same as $(STRICT_WARN).
(GCC_WARN_CXXFLAGS, WARN_CXXFLAGS): New variables.
(CXX): New variable.
(COMPILER): New value if ENABLE_BUILD_WITH_CXX.
(COMPILER_FLAGS, LINKER, LINKER_FLAGS): Likewise.
(ALL_COMPILERFLAGS, ALL_LINKERFLAGS): Likewise.
(HOST_LIBS): New variable.
(GCC_CFLAGS): Add $(C_LOOSE_WARN).
(ALL_CXXFLAGS): New variable.
(LIBS, BACKENDLIBS): Add $(HOST_LIBS).
* doc/install.texi (Configuration): Document
--enable-build-with-cxx, --with-stage1-ldflags,
--with-stage1-libs, --with-boot-ldflags, --with-boot-libs.
* configure: Rebuild.
From-SVN: r148889
2009-06-24 06:03:51 +02:00
# Target libraries that we bootstrap.
2010-01-25 19:01:29 +01:00
bootstrap_target_libs=,target-libgcc,
configure.ac: Add --enable-build-with-cxx.
./: * configure.ac: Add --enable-build-with-cxx. When set, add c++ to
boot_languages. Only bootstrap target libraries listed in
target_libs for some boot language. Add --with-stage1-ldflags,
--with-stage1-libs, --with-boot-ldflags, --with-boot-libs. Remove
with_host_libstdcxx from ppllibs. Only add -fkeep-inline-functions
if not building with C++.
* Makefile.def: For target_module libstdc++-v3, set bootstrap=true.
* Makefile.tpl (STAGE1_LDFLAGS, STAGE1_LIBS): New variables.
(POSTSTAGE1_LDFLAGS, POSTSTAGE1_LIBS): New variables.
(HOST_EXPORTS): Add STAGE1_LDFLAGS to LDFLAGS. Export HOST_LIBS.
(POSTSTAGE1_HOST_EXPORTS): Set CXX and CXX_FOR_BUILD. Add
POSTSTAGE1_LDFLAGS to LDFLAGS. Export HOST_LIBS.
(POSTSTAGE1_FLAGS_TO_PASS): Likewise.
* configure, Makefile.in: Rebuild.
gcc/:
* configure.ac: Invoke AC_PROG_CXX. Separate C specific warnings
from loose_warn into c_loose_warn and from strict_warn into
c_strict_warn. Set and substitute warn_cxxflags. Check for
--enable-build-with-cxx. Set and substitute
ENABLE_BUILD_WITH_CXX. Set and substitute HOST_LIBS.
* Makefile.in (CXXFLAGS): New variable.
(C_LOOSE_WARN, C_STRICT_WARN): New variables.
(GCC_WARN_CFLAGS): Add $(C_LOOSE_WARN). Add $(C_STRICT_WARN) if
the default is the same as $(STRICT_WARN).
(GCC_WARN_CXXFLAGS, WARN_CXXFLAGS): New variables.
(CXX): New variable.
(COMPILER): New value if ENABLE_BUILD_WITH_CXX.
(COMPILER_FLAGS, LINKER, LINKER_FLAGS): Likewise.
(ALL_COMPILERFLAGS, ALL_LINKERFLAGS): Likewise.
(HOST_LIBS): New variable.
(GCC_CFLAGS): Add $(C_LOOSE_WARN).
(ALL_CXXFLAGS): New variable.
(LIBS, BACKENDLIBS): Add $(HOST_LIBS).
* doc/install.texi (Configuration): Document
--enable-build-with-cxx, --with-stage1-ldflags,
--with-stage1-libs, --with-boot-ldflags, --with-boot-libs.
* configure: Rebuild.
From-SVN: r148889
2009-06-24 06:03:51 +02:00
2004-03-11 06:01:17 +01:00
# Figure out what language subdirectories are present.
# Look if the user specified --enable-languages="..."; if not, use
# the environment variable $LANGUAGES if defined. $LANGUAGES might
# go away some day.
# NB: embedded tabs in this IF block -- do not untabify
if test -d ${srcdir}/gcc; then
if test x"${enable_languages+set}" != xset; then
if test x"${LANGUAGES+set}" = xset; then
enable_languages="${LANGUAGES}"
2015-07-24 20:20:44 +02:00
echo configure.ac: warning: setting LANGUAGES is deprecated, use --enable-languages instead 1>&2
2004-03-11 06:01:17 +01:00
else
enable_languages=all
fi
else
if test x"${enable_languages}" = x ||
test x"${enable_languages}" = xyes;
then
2015-07-24 20:20:44 +02:00
echo configure.ac: --enable-languages needs at least one language argument 1>&2
2004-03-11 06:01:17 +01:00
exit 1
fi
fi
enable_languages=`echo "${enable_languages}" | sed -e 's/[[ ,]][[ ,]]*/,/g' -e 's/,$//'`
2005-09-13 08:24:18 +02:00
# 'f95' is the old name for the 'fortran' language. We issue a warning
# and make the substitution.
case ,${enable_languages}, in
*,f95,*)
2015-07-24 20:20:44 +02:00
echo configure.ac: warning: 'f95' as language name is deprecated, use 'fortran' instead 1>&2
2005-09-13 08:24:18 +02:00
enable_languages=`echo "${enable_languages}" | sed -e 's/f95/fortran/g'`
;;
esac
backport: As described in http://gcc.gnu.org/ml/gcc/2012-08/msg00015.html...
Merge from cxx-conversion branch (http://gcc.gnu.org/wiki/cxx-conversion).
As described in http://gcc.gnu.org/ml/gcc/2012-08/msg00015.html, this patch
changes the default bootstrap process so that stage 1 always builds with a C++
compiler.
Other than the bootstrap change, the patch makes no functional changes to the
compiler. Everything should build as it does now in trunk. The main
changes in this patch are:
1- Configuration changes.
2- Re-write of VEC.
3- Re-write of gengtype to support C++ templates and
user-provided marking functions.
4- New hash table class.
5- Re-write double_int.
6- Implement tree macros as inline functions so they can be
called from gdb.
As discussed before, several of these changes do not fully change
the call sites to use the new APIs.
The bootstrap changes have already been tested on a wide range of
targets (http://gcc.gnu.org/wiki/CppBuildStatus). Additionally,
I have tested the merged trunk on: x86_64-unknown-linux-gnu,
mips64el-unknown-linux-gnu, powerpc64-unknown-linux-gnu,
i686-pc-linux-gnu, and ia64-unknown-linux-gnu.
ChangeLog
2012-08-14 Diego Novillo <dnovillo@google.com>
Merge from cxx-conversion branch.
* Makefile.tpl (STAGE[+id+]_CXXFLAGS): Remove
POSTSTAGE1_CONFIGURE_FLAGS.
* Makefile.in: Regenerate.
* configure.ac (ENABLE_BUILD_WITH_CXX): Remove. Update all users.
Force C++ when bootstrapping.
* configure: Regenerate.
libcpp/ChangeLog
2012-08-14 Diego Novillo <dnovillo@google.com>
Merge from cxx-conversion branch. Configury.
* Makefile.in: Remove all handlers of ENABLE_BUILD_WITH_CXX.
* configure.ac: Likewise.
* configure: Regenerate.
2012-08-14 Lawrence Crowl <crowl@google.com>
Merge from cxx-conversion branch. New C++ hash table.
* include/symtab.h (typedef struct ht hash_table): Change the typedef
name to cpp_hash_table. Update all users of the typedef.
gcc/ChangeLog
2012-08-14 Diego Novillo <dnovillo@google.com>
Merge from cxx-conversion branch. Configury.
* configure.ac (CXX_FOR_BUILD): Define and substitute.
(BUILD_CXXFLAGS): Define.
Remove all handlers of ENABLE_BUILD_WITH_CXX.
Force all build to be with C++.
* Makefile.in (BUILD_CXXFLAGS): Use it.
Remove all handlers of ENABLE_BUILD_WITH_CXX.
* configure: Regenerate.
* config.in: Regenerate.
* doc/install.texi: Remove documentation for --enable-build-with-cxx
and --enable-build-poststage1-with-cxx.
2012-08-14 Diego Novillo <dnovillo@google.com>
Merge from cxx-conversion branch. Re-implement VEC in C++.
* vec.c (vec_heap_free): Convert into a template function.
(vec_gc_o_reserve_1): Make extern.
(vec_gc_p_reserve): Remove.
(vec_gc_p_reserve_exact): Remove.
(vec_gc_o_reserve): Remove.
(vec_gc_o_reserve_exact): Remove.
(vec_heap_o_reserve_1): Make extern.
(vec_heap_p_reserve): Remove.
(vec_heap_p_reserve_exact): Remove.
(vec_heap_o_reserve): Remove.
(vec_heap_o_reserve_exact): Remove.
(vec_stack_p_reserve): Remove.
(vec_stack_p_reserve_exact): Remove.
* vec.h (VEC_CHECK_INFO, VEC_CHECK_DECL, VEC_CHECK_PASS,
VEC_ASSERT, VEC_ASSERT_FAIL, vec_assert_fail): Move earlier
in the file.
(VEC): Define to vec_t<T>.
(vec_allocation_t): Define.
(struct vec_prefix): Move earlier in the file.
(vec_t<T>): New template.
(DEF_VEC_I, DEF_VECL_ALLOC_I, DEF_VEC_P, DEF_VEC_ALLOC_P,
DEF_VEC_O, DEF_VEC_ALLOC_P, DEF_VEC_O, DEF_VEC_ALLOC_O,
DEF_VEC_ALLOC_P_STACK, DEF_VEC_ALLOC_O_STACK,
DEF_VEC_ALLOC_I_STACK): Expand to 'struct vec_swallow_trailing_semi'.
(DEF_VEC_A): Provide template instantiations for
GC/PCH markers that do not traverse the vector.
(vec_stack_p_reserve): Remove.
(vec_stack_p_reserve_exact): Remove.
(vec_stack_p_reserve_exact_1): Remove.
(vec_stack_o_reserve): Remove.
(vec_stack_o_reserve_exact): Remove.
(vec_stack_free): Re-write as a template function.
(vec_reserve): New template function.
(vec_reserve_exact): New template function.
(vec_heap_free): New template function if GATHER_STATISTICS is
defined. Otherwise, macro that expands to free().
(VEC_length_1): New template function.
(VEC_length): Call it.
(VEC_empty_1): New template function.
(VEC_empty): Call it.
(VEC_address_1): New template function.
(VEC_address): Call it.
(VEC_last_1): New template function.
(VEC_last): Call it. Change return type to T&.
Change all users that used VEC_Os.
(VEC_index_1): New template function.
(VEC_index): Call it. Return a T& instead of a T*.
Update all callers that were using VEC_O before.
(VEC_iterate_1): New template function.
(VEC_iterate): Call it.
(VEC_embedded_size_1): New template function.
(VEC_embedded_size): Call it.
(VEC_embedded_init_1): New template function.
(VEC_embedded_init): Call it.
(VEC_alloc_1): New template function.
(VEC_alloc): Call it. If A is 'stack', call XALLOCAVAR to
do the allocation.
(VEC_free_1): New template function.
(VEC_free): Call it.
(VEC_copy_1): New template function.
(VEC_copy): Call it.
(VEC_space_1): New template function
(VEC_space): Call it.
(VEC_reserve_1): New template function.
(VEC_reserve): Call it.
(VEC_reserve_exact_1): New template function.
(VEC_reserve_exact): Call it.
(VEC_splice_1): New template function.
(VEC_splice): Call it.
(VEC_safe_splice_1): New template function.
(VEC_safe_splice): Call it.
(VEC_quick_push_1): New template function. Create two overloads, one
accepting T, the other accepting T *. Update all callers
where T and T * are ambiguous.
(VEC_quick_push): Call it.
(VEC_safe_push_1): New template function. Create two overloads, one
accepting T, the other accepting T *. Update all callers
where T and T * are ambiguous.
(VEC_safe_push): Call it.
(VEC_pop_1): New template function.
(VEC_pop): Call it.
(VEC_truncate_1): New template function.
(VEC_truncate): Call it.
(VEC_safe_grow_1): New template function.
(VEC_safe_grow): Call it.
(VEC_safe_grow_cleared_1): New template function.
(VEC_safe_grow_cleared): Call it.
(VEC_replace_1): New template function.
(VEC_replace): Call it. Always accept T instead of T*.
Update all callers that used VEC_Os.
(VEC_quick_insert_1): New template function.
(VEC_quick_insert): Call it.
(VEC_safe_insert_1): New template function.
(VEC_safe_insert): Call it.
(VEC_ordered_remove_1): New template function.
(VEC_ordered_remove): Call it.
(VEC_unordered_remove_1): New template function.
(VEC_unordered_remove): Call it.
(VEC_block_remove_1): New template function.
(VEC_block_remove): Call it.
(VEC_lower_bound_1): New template function.
(VEC_lower_bound): Call it.
(VEC_OP): Remove.
(DEF_VEC_FUNC_P): Remove.
(DEF_VEC_ALLOC_FUNC_P): Remove.
(DEF_VEC_NONALLOC_FUNCS_P): Remove.
(DEF_VEC_FUNC_O): Remove.
(DEF_VEC_ALLOC_FUNC_O): Remove.
(DEF_VEC_NONALLOC_FUNCS_O): Remove.
(DEF_VEC_ALLOC_FUNC_I): Remove.
(DEF_VEC_NONALLOC_FUNCS_I): Remove.
(DEF_VEC_ALLOC_FUNC_P_STACK): Remove.
(DEF_VEC_ALLOC_FUNC_O_STACK): Remove.
(DEF_VEC_ALLOC_FUNC_I_STACK): Remove.
(vec_reserve_exact): New template function.
* gengtype-lex.l (DEF_VEC_ALLOC_[IOP]/{EOID}): Remove.
* gengtype-parse.c (token_names): Remove DEF_VEC_ALLOC_[IOP].
(typedef_name): Emit vec_t<C1> instead of VEC_C1_C2.
(def_vec_alloc): Remove. Update all callers.
* gengtype.c (filter_type_name): New.
(output_mangled_typename): Call it.
(write_func_for_structure): Likewise.
(write_types): Likewise.
(write_root): Likewise.
(write_typed_alloc_def): Likewise.
(note_def_vec): Emit vec_t<TYPE_NAME> instead of VEC_TYPE_NAME_base.
(note_def_vec_alloc): Remove.
* gengtype.h (note_def_vec_alloc): Remove.
(DEFVEC_ALLOC): Remove token code.
* df-scan.c (df_bb_verify): Remove call to df_free_collection_rec
inside the insn traversal loop.
* gimplify.c (gimplify_compound_lval): Rename STACK to EXPR_STACK.
* ipa-inline.c (inline_small_functions): Rename HEAP to EDGE_HEAP.
* reg-stack.c (stack): Rename to STACK_PTR. Update all users.
* tree-vrp.c (stack): Rename to EQUIV_STACK. Update all users.
* config/bfin/bfin.c (hwloop_optimize): Update some calls to
VEC_* for vectors of non-pointers.
* config/c6x/c6x.c (try_rename_operands): Likewise.
(reshuffle_units): Likewise.
* config/mips/mips.c (mips_multi_start): Likewise.
(mips_multi_add): Likewise.
(mips_multi_copy_insn): Likewise.
(mips_multi_set_operand): Likewise.
* hw-doloop.c (discover_loop): Likewise.
(discover_loops): Likewise.
(reorg_loops): Likewise.
2012-08-14 Diego Novillo <dnovillo@google.com>
Merge from cxx-conversion branch. C++ support in gengtype.
* coretypes.h (gt_pointer_operator): Move from ...
* ggc.h: ... here.
* doc/gty.texi: Document support for C++ templates and
user-provided markers.
* gcc/gengtype-lex.l: Update copyright year.
Remove support for recognizing DEF_VEC_O, DEF_VEC_P and
DEFVEC_I.
* gengtype-parse.c: Update copyright year.
(token_names): Remove DEF_VEC_O, DEF_VEC_P and DEF_VEC_I.
(require_template_declaration): New.
(typedef_name): Call it.
(type): Replace IS_UNION with KIND. Replace all users.
(def_vec): Remove. Update all users.
* gengtype-state.c (type_lineloc): Handle TYPE_USER_STRUCT.
(write_state_user_struct_type): New.
(write_state_type): Call it.
(read_state_user_struct_type): New.
(read_state_type): Call it.
* gengtype.c: Update copyright year.
(dump_pair): Move declaration to the top.
(dump_type): Likewise.
(dump_type_list): Likewise.
(dbgprint_count_type_at): Handle TYPE_USER_STRUCT.
(create_user_defined_type): New.
(resolve_typedef): Call it.
(new_structure): Replace argument ISUNION with KIND.
Change users to refer to KIND directly.
Update all callers.
(find_structure): Likewise.
(set_gc_used_type): Handle TYPE_USER_STRUCT.
(create_file): Update HDR to include new copyright year.
(struct walk_type_data): Add field IN_PTR_FIELD.
(output_mangled_typename): Handle TYPE_USER_STRUCT.
(walk_type): Set D->IN_PTR_FIELD when walking a TYPE_POINTER.
Clear it afterwards.
Handle TYPE_USER_STRUCT.
(write_types_process_field): Handle TYPE_USER_STRUCT.
(get_type_specifier): Move earlier in the file.
(write_type_decl): New.
(write_marker_function_name): New.
(write_user_func_for_structure_ptr): New.
(write_user_func_for_structure_body): New.
(write_user_marking_functions): New.
(write_func_for_structure): Call write_marker_function_name
and write_type_decl.
Do not call walk_type for TYPE_USER_STRUCT. Emit a call to the user
function directly.
Call write_user_marking_functions on TYPE_USER_STRUCTs.
(write_types_local_user_process_field): New.
(write_pch_user_walking_for_structure_body): New.
(write_pch_user_walking_functions): New.
(write_types_local_process_field): Handle TYPE_USER_STRUCT.
(write_local_func_for_structure): Do not call walk_type for
TYPE_USER_STRUCT. Instead, emit the call to gt_pch_nx directly.
Call write_pch_user_walking_functions for TYPE_USER_STRUCTs.
(write_root): Handle TYPE_USER_STRUCT.
(vec_prefix_type): Remove. Update all users.
(note_def_vec): Remove. Update all users.
(dump_typekind): Handle TYPE_USER_STRUCT.
(dump_type): Initialize SEEN_TYPES, if needed.
Handle TYPE_USER_STRUCT.
(dump_everything): Do not initialize SEEN_TYPES.
* gengtype.h: Update copyright year.
(enum typekind): Add TYPE_USER_STRUCT.
(union_or_struct_p): Rename from UNION_OR_STRUCT_P.
Convert into function.
Add an overload taking const_type_p.
Update all callers.
(new_structure): Change second field to type enum typekind.
Update all users.
(find_structure): Likewise.
(note_def_vec): Remove.
(DEFVEC_OP): Remove.
(DEFVEC_I): Remove.
* ggc-page.c (gt_ggc_mx): Add entry points for marking
'const char *&', 'unsigned char *&' and 'unsigned char&'.
* ggc-zone.c (gt_ggc_mx): Add entry points for marking
'const char *&' and 'unsigned char *&'.
* stringpool.c (gt_pch_nx): Add entry points for marking
'const char *&', 'unsigned char *&' and 'unsigned char&'.
Add an entry point for the overload taking arguments 'unsigned char
*', 'gt_pointer_operator' and 'void *'.
* vec.h (struct vec_prefix): Remove GTY marker.
(struct vec_t): Remove GTY((length)) attribute from field 'vec'.
(gt_ggc_mx (vec_t<T> *)): New template function.
(gt_pch_nx (vec_t<T> *)): New template function.
(gt_pch_nx (vec_t<T *> *, gt_pointer_operator, void *)): New template
function.
(gt_pch_nx (vec_t<T> *, gt_pointer_operator, void *)): New template
function.
* basic-block.h (struct edge_def): Mark GTY((user)).
Remove all GTY markers from fields.
(gt_ggc_mx): Declare.
(gt_pch_nx): Declare.
* tree-cfg.c (gt_ggc_mx): New.
(gt_pch_nx): New.
* gengtype-lex.l (USER_GTY): Add pattern for "user".
* gengtype-parse.c (option): Handle USER_GTY.
(opts_have): New.
(type): Call it.
If the keyword 'user' is used, do not walk the fields
of the structure.
* gengtype.h (USER_GTY): Add.
* doc/gty.texi: Update.
2012-08-14 Lawrence Crowl <crowl@google.com>
Merge cxx-conversion branch. Implement C++ hash table.
* hash-table.h: New. Implementation borrowed from libiberty/hashtab.c.
* hash-table.c: Likewise.
* tree-ssa-tail-merge.c: Include hash-table.h instead of hashtab.h.
(static htab_t same_succ_htab): Change type to hash_table;
move specification of helper functions from create call to declaration.
Change users to invoke member functions.
(same_succ_print_traverse): Make extern ssa_.... Change callers.
Remove void* casting.
(same_succ_hash): Likewise.
(same_succ_equal): Likewise.
(same_succ_delete): Likewise.
* tree-ssa-threadupdate.c: Include hash-table.h.
(struct local_info): Rename to ssa_local_info_t to avoid overloading
the type name local_info with the variable name local_info.
(static htab_t redirection_data): Change type to hash_table.
Move specification of helper functions from create call to declaration.
Change users to invoke member functions.
(redirection_data_hash): Make extern ssa_.... Change callers.
Remove void* casting.
(redirection_data_eq): Likewise.
(fix_duplicate_block_edges): Likewise.
(create_duplicates): Likewise.
(fixup_template_block): Likewise.
(redirect_edges): Likewise.
(lookup_redirection_data): Change types associated with the hash table
from void* to their actual type. Remove unnecessary casts.
* tree-ssa-ccp.c: Include hash-table.h.
(typedef gimple_htab): New. Uses hash_table. Replace specific uses
of htab_t with gimple_htab. Change users to invoke member functions.
Move specification of helper functions from create call to declaration.
* tree-ssa-coalesce.c: Include hash-table.h instead of hashtab.h.
(hash_ssa_name_by_var): Make extern. Remove void* casting.
(eq_ssa_name_by_var): Likewise.
(coalesce_ssa_name): Change type of local static htab_t ssa_name_hash
to hash_table. Change users to invoke member functions.
Move specification of helper functions from create call to declaration.
* coverage.c: Include hash-table.h instead of hashtab.h.
(static htab_t counts_hash): Change type to hash_table;
move specification of helper functions from create call to declaration.
Change users to invoke member functions.
(htab_counts_entry_hash): Make extern. Rename with coverage_... instead
of htab_... Remove void* casting.
(htab_counts_entry_eq): Likewise.
(htab_counts_entry_del): Likewise.
* tree-ssa-pre.c: Include hash-table.h instead of hashtab.h.
(static htab_t expression_to_id): Change type to hash_table.
Move specification of helper functions from create call to declaration.
Change users to invoke member functions.
(static htab_t phi_translate_table): Likewise.
(pre_expr_eq): Make extern ssa_.... Change callers.
Remove void* casting.
(pre_expr_hash): Likewise.
(expr_pred_trans_hash): Likewise.
(expr_pred_trans_eq): Likewise.
(alloc_expression_id): Change types associated with the hash table
from void* to their actual type. Remove unnecessary casts.
(lookup_expression_id): Likewise.
(phi_trans_lookup): Likewise.
(phi_trans_add): Likewise.
* stringpool.c: Rename uses of libcpp typedef hash_table to
cpp_hash_table.
* Makefile.in: Add hash-table.o to OBJS-libcommon-target.
Add $(HASH_TABLE_H). Add new dependences on $(HASH_TABLE_H).
2012-08-14 Lawrence Crowl <crowl@google.com>
Merge from cxx-conversion branch. Re-write double_int in C++.
* hash-table.h
(typedef double_int): Change to struct (POD).
(double_int::make): New overloads for int to double-int conversion.
(double_int::mask): New.
(double_int::max_value): New.
(double_int::min_value): New.
(double_int::operator ++): New.
(double_int::operator --): New.
(double_int::operator *=): New.
(double_int::operator +=): New.
(double_int::operator -=): New.
(double_int::to_signed): New.
(double_int::to_unsigned): New.
(double_int::fits_unsigned): New.
(double_int::fits_signed): New.
(double_int::fits): New.
(double_int::trailing_zeros): New.
(double_int::popcount): New.
(double_int::multiple_of): New.
(double_int::set_bit): New.
(double_int::mul_with_sign): New.
(double_int::operator * (binary)): New.
(double_int::operator + (binary)): New.
(double_int::operator - (binary)): New.
(double_int::operator - (unary)): New.
(double_int::operator ~ (unary)): New.
(double_int::operator & (binary)): New.
(double_int::operator | (binary)): New.
(double_int::operator ^ (binary)): New.
(double_int::and_not): New.
(double_int::lshift): New.
(double_int::rshift): New.
(double_int::alshift): New.
(double_int::arshift): New.
(double_int::llshift): New.
(double_int::lrshift): New.
(double_int::lrotate): New.
(double_int::rrotate): New.
(double_int::div): New.
(double_int::sdiv): New.
(double_int::udiv): New.
(double_int::mod): New.
(double_int::smod): New.
(double_int::umod): New.
(double_int::divmod): New.
(double_int::sdivmod): New.
(double_int::udivmod): New.
(double_int::ext): New.
(double_int::zext): New.
(double_int::sext): New.
(double_int::is_zero): New.
(double_int::is_one): New.
(double_int::is_minus_one): New.
(double_int::is_negative): New.
(double_int::cmp): New.
(double_int::ucmp): New.
(double_int::scmp): New.
(double_int::ult): New.
(double_int::ugt): New.
(double_int::slt): New.
(double_int::sgt): New.
(double_int::max): New.
(double_int::smax): New.
(double_int::umax): New.
(double_int::min): New.
(double_int::smin): New.
(double_int::umin): New.
(double_int::operator ==): New.
(double_int::operator !=): New.
(shwi_to_double_int): Change implementation to use member function.
(double_int_minus_one): Likewise.
(double_int_zero): Likewise.
(double_int_one): Likewise.
(double_int_two): Likewise.
(double_int_ten): Likewise.
(uhwi_to_double_int): Likewise.
(double_int_to_shwi): Likewise.
(double_int_to_uhwi): Likewise.
(double_int_fits_in_uhwi_p): Likewise.
(double_int_fits_in_shwi_p): Likewise.
(double_int_fits_in_hwi_p): Likewise.
(double_int_mul): Likewise.
(double_int_mul_with_sign): Likewise.
(double_int_add): Likewise.
(double_int_sub): Likewise.
(double_int_neg): Likewise.
(double_int_div): Likewise.
(double_int_sdiv): Likewise.
(double_int_udiv): Likewise.
(double_int_mod): Likewise.
(double_int_smod): Likewise.
(double_int_umod): Likewise.
(double_int_divmod): Likewise.
(double_int_sdivmod): Likewise.
(double_int_udivmod): Likewise.
(double_int_multiple_of): Likewise.
(double_int_setbit): Likewise.
(double_int_ctz): Likewise.
(double_int_not): Likewise.
(double_int_ior): Likewise.
(double_int_and): Likewise.
(double_int_and_not): Likewise.
(double_int_xor): Likewise.
(double_int_lshift): Likewise.
(double_int_rshift): Likewise.
(double_int_lrotate): Likewise.
(double_int_rrotate): Likewise.
(double_int_cmp): Likewise.
(double_int_scmp): Likewise.
(double_int_ucmp): Likewise.
(double_int_max): Likewise.
(double_int_smax): Likewise.
(double_int_umax): Likewise.
(double_int_min): Likewise.
(double_int_smin): Likewise.
(double_int_umin): Likewise.
(double_int_ext): Likewise.
(double_int_sext): Likewise.
(double_int_zext): Likewise.
(double_int_mask): Likewise.
(double_int_max_value): Likewise.
(double_int_min_value): Likewise.
(double_int_zero_p): Likewise.
(double_int_one_p): Likewise.
(double_int_minus_one_p): Likewise.
(double_int_equal_p): Likewise.
(double_int_popcount): Likewise.
* hash-table.c
(double_int_mask): Reuse implementation for double_int::mask.
(double_int_max_value): Likewise.
(double_int_min_value): Likewise.
(double_int_ext): Likewise.
(double_int_zext): Likewise.
(double_int_sext): Likewise.
(double_int_mul_with_sign): Likewise.
(double_int_divmod): Likewise.
(double_int_sdivmod): Likewise.
(double_int_udivmod): Likewise.
(double_int_div): Likewise.
(double_int_sdiv): Likewise.
(double_int_udiv): Likewise.
(double_int_mod): Likewise.
(double_int_smod): Likewise.
(double_int_umod): Likewise.
(double_int_multiple_of): Likewise.
(double_int_lshift): Likewise.
(double_int_rshift): Likewise.
(double_int_lrotate): Likewise.
(double_int_rrotate): Likewise.
(double_int_cmp): Likewise.
(double_int_ucmp): Likewise.
(double_int_scmp): Likewise.
(double_int_max): Likewise.
(double_int_smax): Likewise.
(double_int_umax): Likewise.
(double_int_min): Likewise.
(double_int_smin): Likewise.
(double_int_umin): Likewise.
(double_int_min): Likewise.
(double_int_min): Likewise.
(double_int_min): Likewise.
(double_int_min): Likewise.
(double_int_min): Likewise.
(double_int_min): Likewise.
(double_int::alshift): New.
(double_int::arshift): New.
(double_int::llshift): New.
(double_int::lrshift): New.
(double_int::ult): New.
(double_int::ugt): New.
(double_int::slt): New.
(double_int::sgt): New.
(double_int_setbit): Reuse implementation for double_int::set_bit,
which avoids a name conflict with a macro.
(double_int_double_int_ctz): Reuse implementation for
double_int::trailing_zeros.
(double_int_fits_in_shwi_p): Reuse implementation for
double_int::fits_signed.
(double_int_fits_in_hwi_p): Reuse implementation for double_int::fits.
(double_int_mul): Reuse implementation for binary
double_int::operator *.
(double_int_add): Likewise.
(double_int_sub): Likewise.
(double_int_neg): Reuse implementation for unary
double_int::operator -.
(double_int_max_value): Likewise.
* fixed-value.c: Change to use member functions introduced above.
2012-08-14 Lawrence Crowl <crowl@google.com>
Merge cxx-conversion branch. Support tree macro calling
from gdb.
* tree.h (tree_check): New.
(TREE_CHECK): Use inline function above instead of __extension__.
(tree_not_check): New.
(TREE_NOT_CHECK): Use inline function above instead of __extension__.
(tree_check2): New.
(TREE_CHECK2): Use inline function above instead of __extension__.
(tree_not_check2): New.
(TREE_NOT_CHECK2): Use inline function above instead of __extension__.
(tree_check3): New.
(TREE_CHECK3): Use inline function above instead of __extension__.
(tree_not_check3): New.
(TREE_NOT_CHECK3): Use inline function above instead of __extension__.
(tree_check4): New.
(TREE_CHECK4): Use inline function above instead of __extension__.
(tree_not_check4): New.
(TREE_NOT_CHECK4): Use inline function above instead of __extension__.
(tree_check5): New.
(TREE_CHECK5): Use inline function above instead of __extension__.
(tree_not_check5): New.
(TREE_NOT_CHECK5): Use inline function above instead of __extension__.
(contains_struct_check): New.
(CONTAINS_STRUCT_CHECK): Use inline function above instead of
__extension__.
(tree_class_check): New.
(TREE_CLASS_CHECK): Use inline function above instead of __extension__.
(tree_range_check): New.
(TREE_RANGE_CHECK): Use inline function above instead of __extension__.
(omp_clause_subcode_check): New.
(OMP_CLAUSE_SUBCODE_CHECK): Use inline function above instead of
__extension__.
(omp_clause_range_check): New.
(OMP_CLAUSE_RANGE_CHECK): Use inline function above instead of
__extension__.
(expr_check): New.
(EXPR_CHECK): Use inline function above instead of __extension__.
(non_type_check): New.
(NON_TYPE_CHECK): Use inline function above instead of __extension__.
(tree_vec_elt_check): New.
(TREE_VEC_ELT_CHECK): Use inline function above instead of
__extension__.
(omp_clause_elt_check): New.
(OMP_CLAUSE_ELT_CHECK): Use inline function above instead of
__extension__.
(tree_operand_check): New.
(TREE_OPERAND_CHECK): Use inline function above instead of
__extension__.
(tree_operand_check_code): New.
(TREE_OPERAND_CHECK_CODE): Use inline function above instead of
__extension__.
(TREE_CHAIN): Simplify implementation.
(TREE_TYPE): Simplify implementation.
(tree_operand_length): Move for compilation dependences.
* gdbinit.in: (macro define __FILE__): New.
(macro define __LINE__): New.
(skip "tree.h"): New.
gcc/cp/ChangeLog
2012-08-14 Diego Novillo <dnovillo@google.com>
Merge from cxx-conversion branch. Re-write VEC in C++.
* call.c (add_function_candidate): Remove const qualifier
from call to VEC_index.
2012-08-14 Diego Novillo <dnovillo@google.com>
Merge from cxx-conversion branch. Configury.
* go-c.h: Remove all handlers of ENABLE_BUILD_WITH_CXX.
* go-gcc.cc: Likewise.
* go-system.h: Likewise.
From-SVN: r190402
2012-08-15 03:56:07 +02:00
# If bootstrapping, C++ must be enabled.
case ",$enable_languages,:$enable_bootstrap" in
*,c++,*:*) ;;
*:yes)
2011-07-20 16:08:42 +02:00
if test -f ${srcdir}/gcc/cp/config-lang.in; then
enable_languages="${enable_languages},c++"
else
backport: As described in http://gcc.gnu.org/ml/gcc/2012-08/msg00015.html...
Merge from cxx-conversion branch (http://gcc.gnu.org/wiki/cxx-conversion).
As described in http://gcc.gnu.org/ml/gcc/2012-08/msg00015.html, this patch
changes the default bootstrap process so that stage 1 always builds with a C++
compiler.
Other than the bootstrap change, the patch makes no functional changes to the
compiler. Everything should build as it does now in trunk. The main
changes in this patch are:
1- Configuration changes.
2- Re-write of VEC.
3- Re-write of gengtype to support C++ templates and
user-provided marking functions.
4- New hash table class.
5- Re-write double_int.
6- Implement tree macros as inline functions so they can be
called from gdb.
As discussed before, several of these changes do not fully change
the call sites to use the new APIs.
The bootstrap changes have already been tested on a wide range of
targets (http://gcc.gnu.org/wiki/CppBuildStatus). Additionally,
I have tested the merged trunk on: x86_64-unknown-linux-gnu,
mips64el-unknown-linux-gnu, powerpc64-unknown-linux-gnu,
i686-pc-linux-gnu, and ia64-unknown-linux-gnu.
ChangeLog
2012-08-14 Diego Novillo <dnovillo@google.com>
Merge from cxx-conversion branch.
* Makefile.tpl (STAGE[+id+]_CXXFLAGS): Remove
POSTSTAGE1_CONFIGURE_FLAGS.
* Makefile.in: Regenerate.
* configure.ac (ENABLE_BUILD_WITH_CXX): Remove. Update all users.
Force C++ when bootstrapping.
* configure: Regenerate.
libcpp/ChangeLog
2012-08-14 Diego Novillo <dnovillo@google.com>
Merge from cxx-conversion branch. Configury.
* Makefile.in: Remove all handlers of ENABLE_BUILD_WITH_CXX.
* configure.ac: Likewise.
* configure: Regenerate.
2012-08-14 Lawrence Crowl <crowl@google.com>
Merge from cxx-conversion branch. New C++ hash table.
* include/symtab.h (typedef struct ht hash_table): Change the typedef
name to cpp_hash_table. Update all users of the typedef.
gcc/ChangeLog
2012-08-14 Diego Novillo <dnovillo@google.com>
Merge from cxx-conversion branch. Configury.
* configure.ac (CXX_FOR_BUILD): Define and substitute.
(BUILD_CXXFLAGS): Define.
Remove all handlers of ENABLE_BUILD_WITH_CXX.
Force all build to be with C++.
* Makefile.in (BUILD_CXXFLAGS): Use it.
Remove all handlers of ENABLE_BUILD_WITH_CXX.
* configure: Regenerate.
* config.in: Regenerate.
* doc/install.texi: Remove documentation for --enable-build-with-cxx
and --enable-build-poststage1-with-cxx.
2012-08-14 Diego Novillo <dnovillo@google.com>
Merge from cxx-conversion branch. Re-implement VEC in C++.
* vec.c (vec_heap_free): Convert into a template function.
(vec_gc_o_reserve_1): Make extern.
(vec_gc_p_reserve): Remove.
(vec_gc_p_reserve_exact): Remove.
(vec_gc_o_reserve): Remove.
(vec_gc_o_reserve_exact): Remove.
(vec_heap_o_reserve_1): Make extern.
(vec_heap_p_reserve): Remove.
(vec_heap_p_reserve_exact): Remove.
(vec_heap_o_reserve): Remove.
(vec_heap_o_reserve_exact): Remove.
(vec_stack_p_reserve): Remove.
(vec_stack_p_reserve_exact): Remove.
* vec.h (VEC_CHECK_INFO, VEC_CHECK_DECL, VEC_CHECK_PASS,
VEC_ASSERT, VEC_ASSERT_FAIL, vec_assert_fail): Move earlier
in the file.
(VEC): Define to vec_t<T>.
(vec_allocation_t): Define.
(struct vec_prefix): Move earlier in the file.
(vec_t<T>): New template.
(DEF_VEC_I, DEF_VECL_ALLOC_I, DEF_VEC_P, DEF_VEC_ALLOC_P,
DEF_VEC_O, DEF_VEC_ALLOC_P, DEF_VEC_O, DEF_VEC_ALLOC_O,
DEF_VEC_ALLOC_P_STACK, DEF_VEC_ALLOC_O_STACK,
DEF_VEC_ALLOC_I_STACK): Expand to 'struct vec_swallow_trailing_semi'.
(DEF_VEC_A): Provide template instantiations for
GC/PCH markers that do not traverse the vector.
(vec_stack_p_reserve): Remove.
(vec_stack_p_reserve_exact): Remove.
(vec_stack_p_reserve_exact_1): Remove.
(vec_stack_o_reserve): Remove.
(vec_stack_o_reserve_exact): Remove.
(vec_stack_free): Re-write as a template function.
(vec_reserve): New template function.
(vec_reserve_exact): New template function.
(vec_heap_free): New template function if GATHER_STATISTICS is
defined. Otherwise, macro that expands to free().
(VEC_length_1): New template function.
(VEC_length): Call it.
(VEC_empty_1): New template function.
(VEC_empty): Call it.
(VEC_address_1): New template function.
(VEC_address): Call it.
(VEC_last_1): New template function.
(VEC_last): Call it. Change return type to T&.
Change all users that used VEC_Os.
(VEC_index_1): New template function.
(VEC_index): Call it. Return a T& instead of a T*.
Update all callers that were using VEC_O before.
(VEC_iterate_1): New template function.
(VEC_iterate): Call it.
(VEC_embedded_size_1): New template function.
(VEC_embedded_size): Call it.
(VEC_embedded_init_1): New template function.
(VEC_embedded_init): Call it.
(VEC_alloc_1): New template function.
(VEC_alloc): Call it. If A is 'stack', call XALLOCAVAR to
do the allocation.
(VEC_free_1): New template function.
(VEC_free): Call it.
(VEC_copy_1): New template function.
(VEC_copy): Call it.
(VEC_space_1): New template function
(VEC_space): Call it.
(VEC_reserve_1): New template function.
(VEC_reserve): Call it.
(VEC_reserve_exact_1): New template function.
(VEC_reserve_exact): Call it.
(VEC_splice_1): New template function.
(VEC_splice): Call it.
(VEC_safe_splice_1): New template function.
(VEC_safe_splice): Call it.
(VEC_quick_push_1): New template function. Create two overloads, one
accepting T, the other accepting T *. Update all callers
where T and T * are ambiguous.
(VEC_quick_push): Call it.
(VEC_safe_push_1): New template function. Create two overloads, one
accepting T, the other accepting T *. Update all callers
where T and T * are ambiguous.
(VEC_safe_push): Call it.
(VEC_pop_1): New template function.
(VEC_pop): Call it.
(VEC_truncate_1): New template function.
(VEC_truncate): Call it.
(VEC_safe_grow_1): New template function.
(VEC_safe_grow): Call it.
(VEC_safe_grow_cleared_1): New template function.
(VEC_safe_grow_cleared): Call it.
(VEC_replace_1): New template function.
(VEC_replace): Call it. Always accept T instead of T*.
Update all callers that used VEC_Os.
(VEC_quick_insert_1): New template function.
(VEC_quick_insert): Call it.
(VEC_safe_insert_1): New template function.
(VEC_safe_insert): Call it.
(VEC_ordered_remove_1): New template function.
(VEC_ordered_remove): Call it.
(VEC_unordered_remove_1): New template function.
(VEC_unordered_remove): Call it.
(VEC_block_remove_1): New template function.
(VEC_block_remove): Call it.
(VEC_lower_bound_1): New template function.
(VEC_lower_bound): Call it.
(VEC_OP): Remove.
(DEF_VEC_FUNC_P): Remove.
(DEF_VEC_ALLOC_FUNC_P): Remove.
(DEF_VEC_NONALLOC_FUNCS_P): Remove.
(DEF_VEC_FUNC_O): Remove.
(DEF_VEC_ALLOC_FUNC_O): Remove.
(DEF_VEC_NONALLOC_FUNCS_O): Remove.
(DEF_VEC_ALLOC_FUNC_I): Remove.
(DEF_VEC_NONALLOC_FUNCS_I): Remove.
(DEF_VEC_ALLOC_FUNC_P_STACK): Remove.
(DEF_VEC_ALLOC_FUNC_O_STACK): Remove.
(DEF_VEC_ALLOC_FUNC_I_STACK): Remove.
(vec_reserve_exact): New template function.
* gengtype-lex.l (DEF_VEC_ALLOC_[IOP]/{EOID}): Remove.
* gengtype-parse.c (token_names): Remove DEF_VEC_ALLOC_[IOP].
(typedef_name): Emit vec_t<C1> instead of VEC_C1_C2.
(def_vec_alloc): Remove. Update all callers.
* gengtype.c (filter_type_name): New.
(output_mangled_typename): Call it.
(write_func_for_structure): Likewise.
(write_types): Likewise.
(write_root): Likewise.
(write_typed_alloc_def): Likewise.
(note_def_vec): Emit vec_t<TYPE_NAME> instead of VEC_TYPE_NAME_base.
(note_def_vec_alloc): Remove.
* gengtype.h (note_def_vec_alloc): Remove.
(DEFVEC_ALLOC): Remove token code.
* df-scan.c (df_bb_verify): Remove call to df_free_collection_rec
inside the insn traversal loop.
* gimplify.c (gimplify_compound_lval): Rename STACK to EXPR_STACK.
* ipa-inline.c (inline_small_functions): Rename HEAP to EDGE_HEAP.
* reg-stack.c (stack): Rename to STACK_PTR. Update all users.
* tree-vrp.c (stack): Rename to EQUIV_STACK. Update all users.
* config/bfin/bfin.c (hwloop_optimize): Update some calls to
VEC_* for vectors of non-pointers.
* config/c6x/c6x.c (try_rename_operands): Likewise.
(reshuffle_units): Likewise.
* config/mips/mips.c (mips_multi_start): Likewise.
(mips_multi_add): Likewise.
(mips_multi_copy_insn): Likewise.
(mips_multi_set_operand): Likewise.
* hw-doloop.c (discover_loop): Likewise.
(discover_loops): Likewise.
(reorg_loops): Likewise.
2012-08-14 Diego Novillo <dnovillo@google.com>
Merge from cxx-conversion branch. C++ support in gengtype.
* coretypes.h (gt_pointer_operator): Move from ...
* ggc.h: ... here.
* doc/gty.texi: Document support for C++ templates and
user-provided markers.
* gcc/gengtype-lex.l: Update copyright year.
Remove support for recognizing DEF_VEC_O, DEF_VEC_P and
DEFVEC_I.
* gengtype-parse.c: Update copyright year.
(token_names): Remove DEF_VEC_O, DEF_VEC_P and DEF_VEC_I.
(require_template_declaration): New.
(typedef_name): Call it.
(type): Replace IS_UNION with KIND. Replace all users.
(def_vec): Remove. Update all users.
* gengtype-state.c (type_lineloc): Handle TYPE_USER_STRUCT.
(write_state_user_struct_type): New.
(write_state_type): Call it.
(read_state_user_struct_type): New.
(read_state_type): Call it.
* gengtype.c: Update copyright year.
(dump_pair): Move declaration to the top.
(dump_type): Likewise.
(dump_type_list): Likewise.
(dbgprint_count_type_at): Handle TYPE_USER_STRUCT.
(create_user_defined_type): New.
(resolve_typedef): Call it.
(new_structure): Replace argument ISUNION with KIND.
Change users to refer to KIND directly.
Update all callers.
(find_structure): Likewise.
(set_gc_used_type): Handle TYPE_USER_STRUCT.
(create_file): Update HDR to include new copyright year.
(struct walk_type_data): Add field IN_PTR_FIELD.
(output_mangled_typename): Handle TYPE_USER_STRUCT.
(walk_type): Set D->IN_PTR_FIELD when walking a TYPE_POINTER.
Clear it afterwards.
Handle TYPE_USER_STRUCT.
(write_types_process_field): Handle TYPE_USER_STRUCT.
(get_type_specifier): Move earlier in the file.
(write_type_decl): New.
(write_marker_function_name): New.
(write_user_func_for_structure_ptr): New.
(write_user_func_for_structure_body): New.
(write_user_marking_functions): New.
(write_func_for_structure): Call write_marker_function_name
and write_type_decl.
Do not call walk_type for TYPE_USER_STRUCT. Emit a call to the user
function directly.
Call write_user_marking_functions on TYPE_USER_STRUCTs.
(write_types_local_user_process_field): New.
(write_pch_user_walking_for_structure_body): New.
(write_pch_user_walking_functions): New.
(write_types_local_process_field): Handle TYPE_USER_STRUCT.
(write_local_func_for_structure): Do not call walk_type for
TYPE_USER_STRUCT. Instead, emit the call to gt_pch_nx directly.
Call write_pch_user_walking_functions for TYPE_USER_STRUCTs.
(write_root): Handle TYPE_USER_STRUCT.
(vec_prefix_type): Remove. Update all users.
(note_def_vec): Remove. Update all users.
(dump_typekind): Handle TYPE_USER_STRUCT.
(dump_type): Initialize SEEN_TYPES, if needed.
Handle TYPE_USER_STRUCT.
(dump_everything): Do not initialize SEEN_TYPES.
* gengtype.h: Update copyright year.
(enum typekind): Add TYPE_USER_STRUCT.
(union_or_struct_p): Rename from UNION_OR_STRUCT_P.
Convert into function.
Add an overload taking const_type_p.
Update all callers.
(new_structure): Change second field to type enum typekind.
Update all users.
(find_structure): Likewise.
(note_def_vec): Remove.
(DEFVEC_OP): Remove.
(DEFVEC_I): Remove.
* ggc-page.c (gt_ggc_mx): Add entry points for marking
'const char *&', 'unsigned char *&' and 'unsigned char&'.
* ggc-zone.c (gt_ggc_mx): Add entry points for marking
'const char *&' and 'unsigned char *&'.
* stringpool.c (gt_pch_nx): Add entry points for marking
'const char *&', 'unsigned char *&' and 'unsigned char&'.
Add an entry point for the overload taking arguments 'unsigned char
*', 'gt_pointer_operator' and 'void *'.
* vec.h (struct vec_prefix): Remove GTY marker.
(struct vec_t): Remove GTY((length)) attribute from field 'vec'.
(gt_ggc_mx (vec_t<T> *)): New template function.
(gt_pch_nx (vec_t<T> *)): New template function.
(gt_pch_nx (vec_t<T *> *, gt_pointer_operator, void *)): New template
function.
(gt_pch_nx (vec_t<T> *, gt_pointer_operator, void *)): New template
function.
* basic-block.h (struct edge_def): Mark GTY((user)).
Remove all GTY markers from fields.
(gt_ggc_mx): Declare.
(gt_pch_nx): Declare.
* tree-cfg.c (gt_ggc_mx): New.
(gt_pch_nx): New.
* gengtype-lex.l (USER_GTY): Add pattern for "user".
* gengtype-parse.c (option): Handle USER_GTY.
(opts_have): New.
(type): Call it.
If the keyword 'user' is used, do not walk the fields
of the structure.
* gengtype.h (USER_GTY): Add.
* doc/gty.texi: Update.
2012-08-14 Lawrence Crowl <crowl@google.com>
Merge cxx-conversion branch. Implement C++ hash table.
* hash-table.h: New. Implementation borrowed from libiberty/hashtab.c.
* hash-table.c: Likewise.
* tree-ssa-tail-merge.c: Include hash-table.h instead of hashtab.h.
(static htab_t same_succ_htab): Change type to hash_table;
move specification of helper functions from create call to declaration.
Change users to invoke member functions.
(same_succ_print_traverse): Make extern ssa_.... Change callers.
Remove void* casting.
(same_succ_hash): Likewise.
(same_succ_equal): Likewise.
(same_succ_delete): Likewise.
* tree-ssa-threadupdate.c: Include hash-table.h.
(struct local_info): Rename to ssa_local_info_t to avoid overloading
the type name local_info with the variable name local_info.
(static htab_t redirection_data): Change type to hash_table.
Move specification of helper functions from create call to declaration.
Change users to invoke member functions.
(redirection_data_hash): Make extern ssa_.... Change callers.
Remove void* casting.
(redirection_data_eq): Likewise.
(fix_duplicate_block_edges): Likewise.
(create_duplicates): Likewise.
(fixup_template_block): Likewise.
(redirect_edges): Likewise.
(lookup_redirection_data): Change types associated with the hash table
from void* to their actual type. Remove unnecessary casts.
* tree-ssa-ccp.c: Include hash-table.h.
(typedef gimple_htab): New. Uses hash_table. Replace specific uses
of htab_t with gimple_htab. Change users to invoke member functions.
Move specification of helper functions from create call to declaration.
* tree-ssa-coalesce.c: Include hash-table.h instead of hashtab.h.
(hash_ssa_name_by_var): Make extern. Remove void* casting.
(eq_ssa_name_by_var): Likewise.
(coalesce_ssa_name): Change type of local static htab_t ssa_name_hash
to hash_table. Change users to invoke member functions.
Move specification of helper functions from create call to declaration.
* coverage.c: Include hash-table.h instead of hashtab.h.
(static htab_t counts_hash): Change type to hash_table;
move specification of helper functions from create call to declaration.
Change users to invoke member functions.
(htab_counts_entry_hash): Make extern. Rename with coverage_... instead
of htab_... Remove void* casting.
(htab_counts_entry_eq): Likewise.
(htab_counts_entry_del): Likewise.
* tree-ssa-pre.c: Include hash-table.h instead of hashtab.h.
(static htab_t expression_to_id): Change type to hash_table.
Move specification of helper functions from create call to declaration.
Change users to invoke member functions.
(static htab_t phi_translate_table): Likewise.
(pre_expr_eq): Make extern ssa_.... Change callers.
Remove void* casting.
(pre_expr_hash): Likewise.
(expr_pred_trans_hash): Likewise.
(expr_pred_trans_eq): Likewise.
(alloc_expression_id): Change types associated with the hash table
from void* to their actual type. Remove unnecessary casts.
(lookup_expression_id): Likewise.
(phi_trans_lookup): Likewise.
(phi_trans_add): Likewise.
* stringpool.c: Rename uses of libcpp typedef hash_table to
cpp_hash_table.
* Makefile.in: Add hash-table.o to OBJS-libcommon-target.
Add $(HASH_TABLE_H). Add new dependences on $(HASH_TABLE_H).
2012-08-14 Lawrence Crowl <crowl@google.com>
Merge from cxx-conversion branch. Re-write double_int in C++.
* hash-table.h
(typedef double_int): Change to struct (POD).
(double_int::make): New overloads for int to double-int conversion.
(double_int::mask): New.
(double_int::max_value): New.
(double_int::min_value): New.
(double_int::operator ++): New.
(double_int::operator --): New.
(double_int::operator *=): New.
(double_int::operator +=): New.
(double_int::operator -=): New.
(double_int::to_signed): New.
(double_int::to_unsigned): New.
(double_int::fits_unsigned): New.
(double_int::fits_signed): New.
(double_int::fits): New.
(double_int::trailing_zeros): New.
(double_int::popcount): New.
(double_int::multiple_of): New.
(double_int::set_bit): New.
(double_int::mul_with_sign): New.
(double_int::operator * (binary)): New.
(double_int::operator + (binary)): New.
(double_int::operator - (binary)): New.
(double_int::operator - (unary)): New.
(double_int::operator ~ (unary)): New.
(double_int::operator & (binary)): New.
(double_int::operator | (binary)): New.
(double_int::operator ^ (binary)): New.
(double_int::and_not): New.
(double_int::lshift): New.
(double_int::rshift): New.
(double_int::alshift): New.
(double_int::arshift): New.
(double_int::llshift): New.
(double_int::lrshift): New.
(double_int::lrotate): New.
(double_int::rrotate): New.
(double_int::div): New.
(double_int::sdiv): New.
(double_int::udiv): New.
(double_int::mod): New.
(double_int::smod): New.
(double_int::umod): New.
(double_int::divmod): New.
(double_int::sdivmod): New.
(double_int::udivmod): New.
(double_int::ext): New.
(double_int::zext): New.
(double_int::sext): New.
(double_int::is_zero): New.
(double_int::is_one): New.
(double_int::is_minus_one): New.
(double_int::is_negative): New.
(double_int::cmp): New.
(double_int::ucmp): New.
(double_int::scmp): New.
(double_int::ult): New.
(double_int::ugt): New.
(double_int::slt): New.
(double_int::sgt): New.
(double_int::max): New.
(double_int::smax): New.
(double_int::umax): New.
(double_int::min): New.
(double_int::smin): New.
(double_int::umin): New.
(double_int::operator ==): New.
(double_int::operator !=): New.
(shwi_to_double_int): Change implementation to use member function.
(double_int_minus_one): Likewise.
(double_int_zero): Likewise.
(double_int_one): Likewise.
(double_int_two): Likewise.
(double_int_ten): Likewise.
(uhwi_to_double_int): Likewise.
(double_int_to_shwi): Likewise.
(double_int_to_uhwi): Likewise.
(double_int_fits_in_uhwi_p): Likewise.
(double_int_fits_in_shwi_p): Likewise.
(double_int_fits_in_hwi_p): Likewise.
(double_int_mul): Likewise.
(double_int_mul_with_sign): Likewise.
(double_int_add): Likewise.
(double_int_sub): Likewise.
(double_int_neg): Likewise.
(double_int_div): Likewise.
(double_int_sdiv): Likewise.
(double_int_udiv): Likewise.
(double_int_mod): Likewise.
(double_int_smod): Likewise.
(double_int_umod): Likewise.
(double_int_divmod): Likewise.
(double_int_sdivmod): Likewise.
(double_int_udivmod): Likewise.
(double_int_multiple_of): Likewise.
(double_int_setbit): Likewise.
(double_int_ctz): Likewise.
(double_int_not): Likewise.
(double_int_ior): Likewise.
(double_int_and): Likewise.
(double_int_and_not): Likewise.
(double_int_xor): Likewise.
(double_int_lshift): Likewise.
(double_int_rshift): Likewise.
(double_int_lrotate): Likewise.
(double_int_rrotate): Likewise.
(double_int_cmp): Likewise.
(double_int_scmp): Likewise.
(double_int_ucmp): Likewise.
(double_int_max): Likewise.
(double_int_smax): Likewise.
(double_int_umax): Likewise.
(double_int_min): Likewise.
(double_int_smin): Likewise.
(double_int_umin): Likewise.
(double_int_ext): Likewise.
(double_int_sext): Likewise.
(double_int_zext): Likewise.
(double_int_mask): Likewise.
(double_int_max_value): Likewise.
(double_int_min_value): Likewise.
(double_int_zero_p): Likewise.
(double_int_one_p): Likewise.
(double_int_minus_one_p): Likewise.
(double_int_equal_p): Likewise.
(double_int_popcount): Likewise.
* hash-table.c
(double_int_mask): Reuse implementation for double_int::mask.
(double_int_max_value): Likewise.
(double_int_min_value): Likewise.
(double_int_ext): Likewise.
(double_int_zext): Likewise.
(double_int_sext): Likewise.
(double_int_mul_with_sign): Likewise.
(double_int_divmod): Likewise.
(double_int_sdivmod): Likewise.
(double_int_udivmod): Likewise.
(double_int_div): Likewise.
(double_int_sdiv): Likewise.
(double_int_udiv): Likewise.
(double_int_mod): Likewise.
(double_int_smod): Likewise.
(double_int_umod): Likewise.
(double_int_multiple_of): Likewise.
(double_int_lshift): Likewise.
(double_int_rshift): Likewise.
(double_int_lrotate): Likewise.
(double_int_rrotate): Likewise.
(double_int_cmp): Likewise.
(double_int_ucmp): Likewise.
(double_int_scmp): Likewise.
(double_int_max): Likewise.
(double_int_smax): Likewise.
(double_int_umax): Likewise.
(double_int_min): Likewise.
(double_int_smin): Likewise.
(double_int_umin): Likewise.
(double_int_min): Likewise.
(double_int_min): Likewise.
(double_int_min): Likewise.
(double_int_min): Likewise.
(double_int_min): Likewise.
(double_int_min): Likewise.
(double_int::alshift): New.
(double_int::arshift): New.
(double_int::llshift): New.
(double_int::lrshift): New.
(double_int::ult): New.
(double_int::ugt): New.
(double_int::slt): New.
(double_int::sgt): New.
(double_int_setbit): Reuse implementation for double_int::set_bit,
which avoids a name conflict with a macro.
(double_int_double_int_ctz): Reuse implementation for
double_int::trailing_zeros.
(double_int_fits_in_shwi_p): Reuse implementation for
double_int::fits_signed.
(double_int_fits_in_hwi_p): Reuse implementation for double_int::fits.
(double_int_mul): Reuse implementation for binary
double_int::operator *.
(double_int_add): Likewise.
(double_int_sub): Likewise.
(double_int_neg): Reuse implementation for unary
double_int::operator -.
(double_int_max_value): Likewise.
* fixed-value.c: Change to use member functions introduced above.
2012-08-14 Lawrence Crowl <crowl@google.com>
Merge cxx-conversion branch. Support tree macro calling
from gdb.
* tree.h (tree_check): New.
(TREE_CHECK): Use inline function above instead of __extension__.
(tree_not_check): New.
(TREE_NOT_CHECK): Use inline function above instead of __extension__.
(tree_check2): New.
(TREE_CHECK2): Use inline function above instead of __extension__.
(tree_not_check2): New.
(TREE_NOT_CHECK2): Use inline function above instead of __extension__.
(tree_check3): New.
(TREE_CHECK3): Use inline function above instead of __extension__.
(tree_not_check3): New.
(TREE_NOT_CHECK3): Use inline function above instead of __extension__.
(tree_check4): New.
(TREE_CHECK4): Use inline function above instead of __extension__.
(tree_not_check4): New.
(TREE_NOT_CHECK4): Use inline function above instead of __extension__.
(tree_check5): New.
(TREE_CHECK5): Use inline function above instead of __extension__.
(tree_not_check5): New.
(TREE_NOT_CHECK5): Use inline function above instead of __extension__.
(contains_struct_check): New.
(CONTAINS_STRUCT_CHECK): Use inline function above instead of
__extension__.
(tree_class_check): New.
(TREE_CLASS_CHECK): Use inline function above instead of __extension__.
(tree_range_check): New.
(TREE_RANGE_CHECK): Use inline function above instead of __extension__.
(omp_clause_subcode_check): New.
(OMP_CLAUSE_SUBCODE_CHECK): Use inline function above instead of
__extension__.
(omp_clause_range_check): New.
(OMP_CLAUSE_RANGE_CHECK): Use inline function above instead of
__extension__.
(expr_check): New.
(EXPR_CHECK): Use inline function above instead of __extension__.
(non_type_check): New.
(NON_TYPE_CHECK): Use inline function above instead of __extension__.
(tree_vec_elt_check): New.
(TREE_VEC_ELT_CHECK): Use inline function above instead of
__extension__.
(omp_clause_elt_check): New.
(OMP_CLAUSE_ELT_CHECK): Use inline function above instead of
__extension__.
(tree_operand_check): New.
(TREE_OPERAND_CHECK): Use inline function above instead of
__extension__.
(tree_operand_check_code): New.
(TREE_OPERAND_CHECK_CODE): Use inline function above instead of
__extension__.
(TREE_CHAIN): Simplify implementation.
(TREE_TYPE): Simplify implementation.
(tree_operand_length): Move for compilation dependences.
* gdbinit.in: (macro define __FILE__): New.
(macro define __LINE__): New.
(skip "tree.h"): New.
gcc/cp/ChangeLog
2012-08-14 Diego Novillo <dnovillo@google.com>
Merge from cxx-conversion branch. Re-write VEC in C++.
* call.c (add_function_candidate): Remove const qualifier
from call to VEC_index.
2012-08-14 Diego Novillo <dnovillo@google.com>
Merge from cxx-conversion branch. Configury.
* go-c.h: Remove all handlers of ENABLE_BUILD_WITH_CXX.
* go-gcc.cc: Likewise.
* go-system.h: Likewise.
From-SVN: r190402
2012-08-15 03:56:07 +02:00
AC_MSG_ERROR([bootstrapping requires c++ sources])
2011-07-20 16:08:42 +02:00
fi
;;
esac
2004-03-11 06:01:17 +01:00
# First scan to see if an enabled language requires some other language.
# We assume that a given config-lang.in will list all the language
# front ends it requires, even if some are required indirectly.
for lang_frag in ${srcdir}/gcc/*/config-lang.in .. ; do
case ${lang_frag} in
..) ;;
# The odd quoting in the next line works around
# an apparent bug in bash 1.12 on linux.
${srcdir}/gcc/[[*]]/config-lang.in) ;;
*)
2010-11-18 18:44:11 +01:00
# From the config-lang.in, get $language, $lang_requires, and
# $lang_requires_boot_languages.
2004-03-11 06:01:17 +01:00
language=
lang_requires=
2010-11-18 18:44:11 +01:00
lang_requires_boot_languages=
2004-03-11 06:01:17 +01:00
. ${lang_frag}
2010-11-18 18:44:11 +01:00
for other in ${lang_requires} ${lang_requires_boot_languages}; do
2004-03-11 06:01:17 +01:00
case ,${enable_languages}, in
*,$other,*) ;;
*,all,*) ;;
*,$language,*)
echo " \`$other' language required by \`$language'; enabling" 1>&2
enable_languages="${enable_languages},${other}"
;;
esac
done
2010-11-18 18:44:11 +01:00
for other in ${lang_requires_boot_languages} ; do
if test "$other" != "c"; then
case ,${enable_stage1_languages}, in
*,$other,*) ;;
*,all,*) ;;
*)
case ,${enable_languages}, in
*,$language,*)
echo " '$other' language required by '$language' in stage 1; enabling" 1>&2
enable_stage1_languages="$enable_stage1_languages,${other}"
;;
esac
;;
esac
fi
done
2004-03-11 06:01:17 +01:00
;;
esac
done
2006-12-29 17:58:48 +01:00
new_enable_languages=,c,
2009-10-03 23:10:11 +02:00
# If LTO is enabled, add the LTO front end.
if test "$enable_lto" = "yes" ; then
2009-10-13 05:31:50 +02:00
case ,${enable_languages}, in
*,lto,*) ;;
*) enable_languages="${enable_languages},lto" ;;
esac
2010-10-07 22:28:59 +02:00
if test "${build_lto_plugin}" = "yes" ; then
2009-10-03 23:10:11 +02:00
configdirs="$configdirs lto-plugin"
fi
fi
2015-02-20 10:40:52 +01:00
# If we're building an offloading compiler, add the LTO front end.
if test x"$enable_as_accelerator_for" != x ; then
case ,${enable_languages}, in
*,lto,*) ;;
*) enable_languages="${enable_languages},lto" ;;
esac
fi
2004-03-11 06:01:17 +01:00
missing_languages=`echo ",$enable_languages," | sed -e s/,all,/,/ -e s/,c,/,/ `
2006-12-29 17:58:48 +01:00
potential_languages=,c,
2004-03-11 06:01:17 +01:00
2010-11-21 02:49:05 +01:00
enabled_target_libs=
disabled_target_libs=
2004-03-11 06:01:17 +01:00
for lang_frag in ${srcdir}/gcc/*/config-lang.in .. ; do
case ${lang_frag} in
..) ;;
# The odd quoting in the next line works around
# an apparent bug in bash 1.12 on linux.
${srcdir}/gcc/[[*]]/config-lang.in) ;;
*)
# From the config-lang.in, get $language, $target_libs,
2004-03-16 01:03:30 +01:00
# $lang_dirs, $boot_language, and $build_by_default
2004-03-11 06:01:17 +01:00
language=
target_libs=
lang_dirs=
2006-07-03 09:58:08 +02:00
subdir_requires=
2006-12-29 17:58:48 +01:00
boot_language=no
build_by_default=yes
2004-03-11 06:01:17 +01:00
. ${lang_frag}
2006-12-29 17:58:48 +01:00
if test x${language} = x; then
echo "${lang_frag} doesn't set \$language." 1>&2
exit 1
fi
2011-07-19 20:33:25 +02:00
if test "$language" = "c++"; then
backport: As described in http://gcc.gnu.org/ml/gcc/2012-08/msg00015.html...
Merge from cxx-conversion branch (http://gcc.gnu.org/wiki/cxx-conversion).
As described in http://gcc.gnu.org/ml/gcc/2012-08/msg00015.html, this patch
changes the default bootstrap process so that stage 1 always builds with a C++
compiler.
Other than the bootstrap change, the patch makes no functional changes to the
compiler. Everything should build as it does now in trunk. The main
changes in this patch are:
1- Configuration changes.
2- Re-write of VEC.
3- Re-write of gengtype to support C++ templates and
user-provided marking functions.
4- New hash table class.
5- Re-write double_int.
6- Implement tree macros as inline functions so they can be
called from gdb.
As discussed before, several of these changes do not fully change
the call sites to use the new APIs.
The bootstrap changes have already been tested on a wide range of
targets (http://gcc.gnu.org/wiki/CppBuildStatus). Additionally,
I have tested the merged trunk on: x86_64-unknown-linux-gnu,
mips64el-unknown-linux-gnu, powerpc64-unknown-linux-gnu,
i686-pc-linux-gnu, and ia64-unknown-linux-gnu.
ChangeLog
2012-08-14 Diego Novillo <dnovillo@google.com>
Merge from cxx-conversion branch.
* Makefile.tpl (STAGE[+id+]_CXXFLAGS): Remove
POSTSTAGE1_CONFIGURE_FLAGS.
* Makefile.in: Regenerate.
* configure.ac (ENABLE_BUILD_WITH_CXX): Remove. Update all users.
Force C++ when bootstrapping.
* configure: Regenerate.
libcpp/ChangeLog
2012-08-14 Diego Novillo <dnovillo@google.com>
Merge from cxx-conversion branch. Configury.
* Makefile.in: Remove all handlers of ENABLE_BUILD_WITH_CXX.
* configure.ac: Likewise.
* configure: Regenerate.
2012-08-14 Lawrence Crowl <crowl@google.com>
Merge from cxx-conversion branch. New C++ hash table.
* include/symtab.h (typedef struct ht hash_table): Change the typedef
name to cpp_hash_table. Update all users of the typedef.
gcc/ChangeLog
2012-08-14 Diego Novillo <dnovillo@google.com>
Merge from cxx-conversion branch. Configury.
* configure.ac (CXX_FOR_BUILD): Define and substitute.
(BUILD_CXXFLAGS): Define.
Remove all handlers of ENABLE_BUILD_WITH_CXX.
Force all build to be with C++.
* Makefile.in (BUILD_CXXFLAGS): Use it.
Remove all handlers of ENABLE_BUILD_WITH_CXX.
* configure: Regenerate.
* config.in: Regenerate.
* doc/install.texi: Remove documentation for --enable-build-with-cxx
and --enable-build-poststage1-with-cxx.
2012-08-14 Diego Novillo <dnovillo@google.com>
Merge from cxx-conversion branch. Re-implement VEC in C++.
* vec.c (vec_heap_free): Convert into a template function.
(vec_gc_o_reserve_1): Make extern.
(vec_gc_p_reserve): Remove.
(vec_gc_p_reserve_exact): Remove.
(vec_gc_o_reserve): Remove.
(vec_gc_o_reserve_exact): Remove.
(vec_heap_o_reserve_1): Make extern.
(vec_heap_p_reserve): Remove.
(vec_heap_p_reserve_exact): Remove.
(vec_heap_o_reserve): Remove.
(vec_heap_o_reserve_exact): Remove.
(vec_stack_p_reserve): Remove.
(vec_stack_p_reserve_exact): Remove.
* vec.h (VEC_CHECK_INFO, VEC_CHECK_DECL, VEC_CHECK_PASS,
VEC_ASSERT, VEC_ASSERT_FAIL, vec_assert_fail): Move earlier
in the file.
(VEC): Define to vec_t<T>.
(vec_allocation_t): Define.
(struct vec_prefix): Move earlier in the file.
(vec_t<T>): New template.
(DEF_VEC_I, DEF_VECL_ALLOC_I, DEF_VEC_P, DEF_VEC_ALLOC_P,
DEF_VEC_O, DEF_VEC_ALLOC_P, DEF_VEC_O, DEF_VEC_ALLOC_O,
DEF_VEC_ALLOC_P_STACK, DEF_VEC_ALLOC_O_STACK,
DEF_VEC_ALLOC_I_STACK): Expand to 'struct vec_swallow_trailing_semi'.
(DEF_VEC_A): Provide template instantiations for
GC/PCH markers that do not traverse the vector.
(vec_stack_p_reserve): Remove.
(vec_stack_p_reserve_exact): Remove.
(vec_stack_p_reserve_exact_1): Remove.
(vec_stack_o_reserve): Remove.
(vec_stack_o_reserve_exact): Remove.
(vec_stack_free): Re-write as a template function.
(vec_reserve): New template function.
(vec_reserve_exact): New template function.
(vec_heap_free): New template function if GATHER_STATISTICS is
defined. Otherwise, macro that expands to free().
(VEC_length_1): New template function.
(VEC_length): Call it.
(VEC_empty_1): New template function.
(VEC_empty): Call it.
(VEC_address_1): New template function.
(VEC_address): Call it.
(VEC_last_1): New template function.
(VEC_last): Call it. Change return type to T&.
Change all users that used VEC_Os.
(VEC_index_1): New template function.
(VEC_index): Call it. Return a T& instead of a T*.
Update all callers that were using VEC_O before.
(VEC_iterate_1): New template function.
(VEC_iterate): Call it.
(VEC_embedded_size_1): New template function.
(VEC_embedded_size): Call it.
(VEC_embedded_init_1): New template function.
(VEC_embedded_init): Call it.
(VEC_alloc_1): New template function.
(VEC_alloc): Call it. If A is 'stack', call XALLOCAVAR to
do the allocation.
(VEC_free_1): New template function.
(VEC_free): Call it.
(VEC_copy_1): New template function.
(VEC_copy): Call it.
(VEC_space_1): New template function
(VEC_space): Call it.
(VEC_reserve_1): New template function.
(VEC_reserve): Call it.
(VEC_reserve_exact_1): New template function.
(VEC_reserve_exact): Call it.
(VEC_splice_1): New template function.
(VEC_splice): Call it.
(VEC_safe_splice_1): New template function.
(VEC_safe_splice): Call it.
(VEC_quick_push_1): New template function. Create two overloads, one
accepting T, the other accepting T *. Update all callers
where T and T * are ambiguous.
(VEC_quick_push): Call it.
(VEC_safe_push_1): New template function. Create two overloads, one
accepting T, the other accepting T *. Update all callers
where T and T * are ambiguous.
(VEC_safe_push): Call it.
(VEC_pop_1): New template function.
(VEC_pop): Call it.
(VEC_truncate_1): New template function.
(VEC_truncate): Call it.
(VEC_safe_grow_1): New template function.
(VEC_safe_grow): Call it.
(VEC_safe_grow_cleared_1): New template function.
(VEC_safe_grow_cleared): Call it.
(VEC_replace_1): New template function.
(VEC_replace): Call it. Always accept T instead of T*.
Update all callers that used VEC_Os.
(VEC_quick_insert_1): New template function.
(VEC_quick_insert): Call it.
(VEC_safe_insert_1): New template function.
(VEC_safe_insert): Call it.
(VEC_ordered_remove_1): New template function.
(VEC_ordered_remove): Call it.
(VEC_unordered_remove_1): New template function.
(VEC_unordered_remove): Call it.
(VEC_block_remove_1): New template function.
(VEC_block_remove): Call it.
(VEC_lower_bound_1): New template function.
(VEC_lower_bound): Call it.
(VEC_OP): Remove.
(DEF_VEC_FUNC_P): Remove.
(DEF_VEC_ALLOC_FUNC_P): Remove.
(DEF_VEC_NONALLOC_FUNCS_P): Remove.
(DEF_VEC_FUNC_O): Remove.
(DEF_VEC_ALLOC_FUNC_O): Remove.
(DEF_VEC_NONALLOC_FUNCS_O): Remove.
(DEF_VEC_ALLOC_FUNC_I): Remove.
(DEF_VEC_NONALLOC_FUNCS_I): Remove.
(DEF_VEC_ALLOC_FUNC_P_STACK): Remove.
(DEF_VEC_ALLOC_FUNC_O_STACK): Remove.
(DEF_VEC_ALLOC_FUNC_I_STACK): Remove.
(vec_reserve_exact): New template function.
* gengtype-lex.l (DEF_VEC_ALLOC_[IOP]/{EOID}): Remove.
* gengtype-parse.c (token_names): Remove DEF_VEC_ALLOC_[IOP].
(typedef_name): Emit vec_t<C1> instead of VEC_C1_C2.
(def_vec_alloc): Remove. Update all callers.
* gengtype.c (filter_type_name): New.
(output_mangled_typename): Call it.
(write_func_for_structure): Likewise.
(write_types): Likewise.
(write_root): Likewise.
(write_typed_alloc_def): Likewise.
(note_def_vec): Emit vec_t<TYPE_NAME> instead of VEC_TYPE_NAME_base.
(note_def_vec_alloc): Remove.
* gengtype.h (note_def_vec_alloc): Remove.
(DEFVEC_ALLOC): Remove token code.
* df-scan.c (df_bb_verify): Remove call to df_free_collection_rec
inside the insn traversal loop.
* gimplify.c (gimplify_compound_lval): Rename STACK to EXPR_STACK.
* ipa-inline.c (inline_small_functions): Rename HEAP to EDGE_HEAP.
* reg-stack.c (stack): Rename to STACK_PTR. Update all users.
* tree-vrp.c (stack): Rename to EQUIV_STACK. Update all users.
* config/bfin/bfin.c (hwloop_optimize): Update some calls to
VEC_* for vectors of non-pointers.
* config/c6x/c6x.c (try_rename_operands): Likewise.
(reshuffle_units): Likewise.
* config/mips/mips.c (mips_multi_start): Likewise.
(mips_multi_add): Likewise.
(mips_multi_copy_insn): Likewise.
(mips_multi_set_operand): Likewise.
* hw-doloop.c (discover_loop): Likewise.
(discover_loops): Likewise.
(reorg_loops): Likewise.
2012-08-14 Diego Novillo <dnovillo@google.com>
Merge from cxx-conversion branch. C++ support in gengtype.
* coretypes.h (gt_pointer_operator): Move from ...
* ggc.h: ... here.
* doc/gty.texi: Document support for C++ templates and
user-provided markers.
* gcc/gengtype-lex.l: Update copyright year.
Remove support for recognizing DEF_VEC_O, DEF_VEC_P and
DEFVEC_I.
* gengtype-parse.c: Update copyright year.
(token_names): Remove DEF_VEC_O, DEF_VEC_P and DEF_VEC_I.
(require_template_declaration): New.
(typedef_name): Call it.
(type): Replace IS_UNION with KIND. Replace all users.
(def_vec): Remove. Update all users.
* gengtype-state.c (type_lineloc): Handle TYPE_USER_STRUCT.
(write_state_user_struct_type): New.
(write_state_type): Call it.
(read_state_user_struct_type): New.
(read_state_type): Call it.
* gengtype.c: Update copyright year.
(dump_pair): Move declaration to the top.
(dump_type): Likewise.
(dump_type_list): Likewise.
(dbgprint_count_type_at): Handle TYPE_USER_STRUCT.
(create_user_defined_type): New.
(resolve_typedef): Call it.
(new_structure): Replace argument ISUNION with KIND.
Change users to refer to KIND directly.
Update all callers.
(find_structure): Likewise.
(set_gc_used_type): Handle TYPE_USER_STRUCT.
(create_file): Update HDR to include new copyright year.
(struct walk_type_data): Add field IN_PTR_FIELD.
(output_mangled_typename): Handle TYPE_USER_STRUCT.
(walk_type): Set D->IN_PTR_FIELD when walking a TYPE_POINTER.
Clear it afterwards.
Handle TYPE_USER_STRUCT.
(write_types_process_field): Handle TYPE_USER_STRUCT.
(get_type_specifier): Move earlier in the file.
(write_type_decl): New.
(write_marker_function_name): New.
(write_user_func_for_structure_ptr): New.
(write_user_func_for_structure_body): New.
(write_user_marking_functions): New.
(write_func_for_structure): Call write_marker_function_name
and write_type_decl.
Do not call walk_type for TYPE_USER_STRUCT. Emit a call to the user
function directly.
Call write_user_marking_functions on TYPE_USER_STRUCTs.
(write_types_local_user_process_field): New.
(write_pch_user_walking_for_structure_body): New.
(write_pch_user_walking_functions): New.
(write_types_local_process_field): Handle TYPE_USER_STRUCT.
(write_local_func_for_structure): Do not call walk_type for
TYPE_USER_STRUCT. Instead, emit the call to gt_pch_nx directly.
Call write_pch_user_walking_functions for TYPE_USER_STRUCTs.
(write_root): Handle TYPE_USER_STRUCT.
(vec_prefix_type): Remove. Update all users.
(note_def_vec): Remove. Update all users.
(dump_typekind): Handle TYPE_USER_STRUCT.
(dump_type): Initialize SEEN_TYPES, if needed.
Handle TYPE_USER_STRUCT.
(dump_everything): Do not initialize SEEN_TYPES.
* gengtype.h: Update copyright year.
(enum typekind): Add TYPE_USER_STRUCT.
(union_or_struct_p): Rename from UNION_OR_STRUCT_P.
Convert into function.
Add an overload taking const_type_p.
Update all callers.
(new_structure): Change second field to type enum typekind.
Update all users.
(find_structure): Likewise.
(note_def_vec): Remove.
(DEFVEC_OP): Remove.
(DEFVEC_I): Remove.
* ggc-page.c (gt_ggc_mx): Add entry points for marking
'const char *&', 'unsigned char *&' and 'unsigned char&'.
* ggc-zone.c (gt_ggc_mx): Add entry points for marking
'const char *&' and 'unsigned char *&'.
* stringpool.c (gt_pch_nx): Add entry points for marking
'const char *&', 'unsigned char *&' and 'unsigned char&'.
Add an entry point for the overload taking arguments 'unsigned char
*', 'gt_pointer_operator' and 'void *'.
* vec.h (struct vec_prefix): Remove GTY marker.
(struct vec_t): Remove GTY((length)) attribute from field 'vec'.
(gt_ggc_mx (vec_t<T> *)): New template function.
(gt_pch_nx (vec_t<T> *)): New template function.
(gt_pch_nx (vec_t<T *> *, gt_pointer_operator, void *)): New template
function.
(gt_pch_nx (vec_t<T> *, gt_pointer_operator, void *)): New template
function.
* basic-block.h (struct edge_def): Mark GTY((user)).
Remove all GTY markers from fields.
(gt_ggc_mx): Declare.
(gt_pch_nx): Declare.
* tree-cfg.c (gt_ggc_mx): New.
(gt_pch_nx): New.
* gengtype-lex.l (USER_GTY): Add pattern for "user".
* gengtype-parse.c (option): Handle USER_GTY.
(opts_have): New.
(type): Call it.
If the keyword 'user' is used, do not walk the fields
of the structure.
* gengtype.h (USER_GTY): Add.
* doc/gty.texi: Update.
2012-08-14 Lawrence Crowl <crowl@google.com>
Merge cxx-conversion branch. Implement C++ hash table.
* hash-table.h: New. Implementation borrowed from libiberty/hashtab.c.
* hash-table.c: Likewise.
* tree-ssa-tail-merge.c: Include hash-table.h instead of hashtab.h.
(static htab_t same_succ_htab): Change type to hash_table;
move specification of helper functions from create call to declaration.
Change users to invoke member functions.
(same_succ_print_traverse): Make extern ssa_.... Change callers.
Remove void* casting.
(same_succ_hash): Likewise.
(same_succ_equal): Likewise.
(same_succ_delete): Likewise.
* tree-ssa-threadupdate.c: Include hash-table.h.
(struct local_info): Rename to ssa_local_info_t to avoid overloading
the type name local_info with the variable name local_info.
(static htab_t redirection_data): Change type to hash_table.
Move specification of helper functions from create call to declaration.
Change users to invoke member functions.
(redirection_data_hash): Make extern ssa_.... Change callers.
Remove void* casting.
(redirection_data_eq): Likewise.
(fix_duplicate_block_edges): Likewise.
(create_duplicates): Likewise.
(fixup_template_block): Likewise.
(redirect_edges): Likewise.
(lookup_redirection_data): Change types associated with the hash table
from void* to their actual type. Remove unnecessary casts.
* tree-ssa-ccp.c: Include hash-table.h.
(typedef gimple_htab): New. Uses hash_table. Replace specific uses
of htab_t with gimple_htab. Change users to invoke member functions.
Move specification of helper functions from create call to declaration.
* tree-ssa-coalesce.c: Include hash-table.h instead of hashtab.h.
(hash_ssa_name_by_var): Make extern. Remove void* casting.
(eq_ssa_name_by_var): Likewise.
(coalesce_ssa_name): Change type of local static htab_t ssa_name_hash
to hash_table. Change users to invoke member functions.
Move specification of helper functions from create call to declaration.
* coverage.c: Include hash-table.h instead of hashtab.h.
(static htab_t counts_hash): Change type to hash_table;
move specification of helper functions from create call to declaration.
Change users to invoke member functions.
(htab_counts_entry_hash): Make extern. Rename with coverage_... instead
of htab_... Remove void* casting.
(htab_counts_entry_eq): Likewise.
(htab_counts_entry_del): Likewise.
* tree-ssa-pre.c: Include hash-table.h instead of hashtab.h.
(static htab_t expression_to_id): Change type to hash_table.
Move specification of helper functions from create call to declaration.
Change users to invoke member functions.
(static htab_t phi_translate_table): Likewise.
(pre_expr_eq): Make extern ssa_.... Change callers.
Remove void* casting.
(pre_expr_hash): Likewise.
(expr_pred_trans_hash): Likewise.
(expr_pred_trans_eq): Likewise.
(alloc_expression_id): Change types associated with the hash table
from void* to their actual type. Remove unnecessary casts.
(lookup_expression_id): Likewise.
(phi_trans_lookup): Likewise.
(phi_trans_add): Likewise.
* stringpool.c: Rename uses of libcpp typedef hash_table to
cpp_hash_table.
* Makefile.in: Add hash-table.o to OBJS-libcommon-target.
Add $(HASH_TABLE_H). Add new dependences on $(HASH_TABLE_H).
2012-08-14 Lawrence Crowl <crowl@google.com>
Merge from cxx-conversion branch. Re-write double_int in C++.
* hash-table.h
(typedef double_int): Change to struct (POD).
(double_int::make): New overloads for int to double-int conversion.
(double_int::mask): New.
(double_int::max_value): New.
(double_int::min_value): New.
(double_int::operator ++): New.
(double_int::operator --): New.
(double_int::operator *=): New.
(double_int::operator +=): New.
(double_int::operator -=): New.
(double_int::to_signed): New.
(double_int::to_unsigned): New.
(double_int::fits_unsigned): New.
(double_int::fits_signed): New.
(double_int::fits): New.
(double_int::trailing_zeros): New.
(double_int::popcount): New.
(double_int::multiple_of): New.
(double_int::set_bit): New.
(double_int::mul_with_sign): New.
(double_int::operator * (binary)): New.
(double_int::operator + (binary)): New.
(double_int::operator - (binary)): New.
(double_int::operator - (unary)): New.
(double_int::operator ~ (unary)): New.
(double_int::operator & (binary)): New.
(double_int::operator | (binary)): New.
(double_int::operator ^ (binary)): New.
(double_int::and_not): New.
(double_int::lshift): New.
(double_int::rshift): New.
(double_int::alshift): New.
(double_int::arshift): New.
(double_int::llshift): New.
(double_int::lrshift): New.
(double_int::lrotate): New.
(double_int::rrotate): New.
(double_int::div): New.
(double_int::sdiv): New.
(double_int::udiv): New.
(double_int::mod): New.
(double_int::smod): New.
(double_int::umod): New.
(double_int::divmod): New.
(double_int::sdivmod): New.
(double_int::udivmod): New.
(double_int::ext): New.
(double_int::zext): New.
(double_int::sext): New.
(double_int::is_zero): New.
(double_int::is_one): New.
(double_int::is_minus_one): New.
(double_int::is_negative): New.
(double_int::cmp): New.
(double_int::ucmp): New.
(double_int::scmp): New.
(double_int::ult): New.
(double_int::ugt): New.
(double_int::slt): New.
(double_int::sgt): New.
(double_int::max): New.
(double_int::smax): New.
(double_int::umax): New.
(double_int::min): New.
(double_int::smin): New.
(double_int::umin): New.
(double_int::operator ==): New.
(double_int::operator !=): New.
(shwi_to_double_int): Change implementation to use member function.
(double_int_minus_one): Likewise.
(double_int_zero): Likewise.
(double_int_one): Likewise.
(double_int_two): Likewise.
(double_int_ten): Likewise.
(uhwi_to_double_int): Likewise.
(double_int_to_shwi): Likewise.
(double_int_to_uhwi): Likewise.
(double_int_fits_in_uhwi_p): Likewise.
(double_int_fits_in_shwi_p): Likewise.
(double_int_fits_in_hwi_p): Likewise.
(double_int_mul): Likewise.
(double_int_mul_with_sign): Likewise.
(double_int_add): Likewise.
(double_int_sub): Likewise.
(double_int_neg): Likewise.
(double_int_div): Likewise.
(double_int_sdiv): Likewise.
(double_int_udiv): Likewise.
(double_int_mod): Likewise.
(double_int_smod): Likewise.
(double_int_umod): Likewise.
(double_int_divmod): Likewise.
(double_int_sdivmod): Likewise.
(double_int_udivmod): Likewise.
(double_int_multiple_of): Likewise.
(double_int_setbit): Likewise.
(double_int_ctz): Likewise.
(double_int_not): Likewise.
(double_int_ior): Likewise.
(double_int_and): Likewise.
(double_int_and_not): Likewise.
(double_int_xor): Likewise.
(double_int_lshift): Likewise.
(double_int_rshift): Likewise.
(double_int_lrotate): Likewise.
(double_int_rrotate): Likewise.
(double_int_cmp): Likewise.
(double_int_scmp): Likewise.
(double_int_ucmp): Likewise.
(double_int_max): Likewise.
(double_int_smax): Likewise.
(double_int_umax): Likewise.
(double_int_min): Likewise.
(double_int_smin): Likewise.
(double_int_umin): Likewise.
(double_int_ext): Likewise.
(double_int_sext): Likewise.
(double_int_zext): Likewise.
(double_int_mask): Likewise.
(double_int_max_value): Likewise.
(double_int_min_value): Likewise.
(double_int_zero_p): Likewise.
(double_int_one_p): Likewise.
(double_int_minus_one_p): Likewise.
(double_int_equal_p): Likewise.
(double_int_popcount): Likewise.
* hash-table.c
(double_int_mask): Reuse implementation for double_int::mask.
(double_int_max_value): Likewise.
(double_int_min_value): Likewise.
(double_int_ext): Likewise.
(double_int_zext): Likewise.
(double_int_sext): Likewise.
(double_int_mul_with_sign): Likewise.
(double_int_divmod): Likewise.
(double_int_sdivmod): Likewise.
(double_int_udivmod): Likewise.
(double_int_div): Likewise.
(double_int_sdiv): Likewise.
(double_int_udiv): Likewise.
(double_int_mod): Likewise.
(double_int_smod): Likewise.
(double_int_umod): Likewise.
(double_int_multiple_of): Likewise.
(double_int_lshift): Likewise.
(double_int_rshift): Likewise.
(double_int_lrotate): Likewise.
(double_int_rrotate): Likewise.
(double_int_cmp): Likewise.
(double_int_ucmp): Likewise.
(double_int_scmp): Likewise.
(double_int_max): Likewise.
(double_int_smax): Likewise.
(double_int_umax): Likewise.
(double_int_min): Likewise.
(double_int_smin): Likewise.
(double_int_umin): Likewise.
(double_int_min): Likewise.
(double_int_min): Likewise.
(double_int_min): Likewise.
(double_int_min): Likewise.
(double_int_min): Likewise.
(double_int_min): Likewise.
(double_int::alshift): New.
(double_int::arshift): New.
(double_int::llshift): New.
(double_int::lrshift): New.
(double_int::ult): New.
(double_int::ugt): New.
(double_int::slt): New.
(double_int::sgt): New.
(double_int_setbit): Reuse implementation for double_int::set_bit,
which avoids a name conflict with a macro.
(double_int_double_int_ctz): Reuse implementation for
double_int::trailing_zeros.
(double_int_fits_in_shwi_p): Reuse implementation for
double_int::fits_signed.
(double_int_fits_in_hwi_p): Reuse implementation for double_int::fits.
(double_int_mul): Reuse implementation for binary
double_int::operator *.
(double_int_add): Likewise.
(double_int_sub): Likewise.
(double_int_neg): Reuse implementation for unary
double_int::operator -.
(double_int_max_value): Likewise.
* fixed-value.c: Change to use member functions introduced above.
2012-08-14 Lawrence Crowl <crowl@google.com>
Merge cxx-conversion branch. Support tree macro calling
from gdb.
* tree.h (tree_check): New.
(TREE_CHECK): Use inline function above instead of __extension__.
(tree_not_check): New.
(TREE_NOT_CHECK): Use inline function above instead of __extension__.
(tree_check2): New.
(TREE_CHECK2): Use inline function above instead of __extension__.
(tree_not_check2): New.
(TREE_NOT_CHECK2): Use inline function above instead of __extension__.
(tree_check3): New.
(TREE_CHECK3): Use inline function above instead of __extension__.
(tree_not_check3): New.
(TREE_NOT_CHECK3): Use inline function above instead of __extension__.
(tree_check4): New.
(TREE_CHECK4): Use inline function above instead of __extension__.
(tree_not_check4): New.
(TREE_NOT_CHECK4): Use inline function above instead of __extension__.
(tree_check5): New.
(TREE_CHECK5): Use inline function above instead of __extension__.
(tree_not_check5): New.
(TREE_NOT_CHECK5): Use inline function above instead of __extension__.
(contains_struct_check): New.
(CONTAINS_STRUCT_CHECK): Use inline function above instead of
__extension__.
(tree_class_check): New.
(TREE_CLASS_CHECK): Use inline function above instead of __extension__.
(tree_range_check): New.
(TREE_RANGE_CHECK): Use inline function above instead of __extension__.
(omp_clause_subcode_check): New.
(OMP_CLAUSE_SUBCODE_CHECK): Use inline function above instead of
__extension__.
(omp_clause_range_check): New.
(OMP_CLAUSE_RANGE_CHECK): Use inline function above instead of
__extension__.
(expr_check): New.
(EXPR_CHECK): Use inline function above instead of __extension__.
(non_type_check): New.
(NON_TYPE_CHECK): Use inline function above instead of __extension__.
(tree_vec_elt_check): New.
(TREE_VEC_ELT_CHECK): Use inline function above instead of
__extension__.
(omp_clause_elt_check): New.
(OMP_CLAUSE_ELT_CHECK): Use inline function above instead of
__extension__.
(tree_operand_check): New.
(TREE_OPERAND_CHECK): Use inline function above instead of
__extension__.
(tree_operand_check_code): New.
(TREE_OPERAND_CHECK_CODE): Use inline function above instead of
__extension__.
(TREE_CHAIN): Simplify implementation.
(TREE_TYPE): Simplify implementation.
(tree_operand_length): Move for compilation dependences.
* gdbinit.in: (macro define __FILE__): New.
(macro define __LINE__): New.
(skip "tree.h"): New.
gcc/cp/ChangeLog
2012-08-14 Diego Novillo <dnovillo@google.com>
Merge from cxx-conversion branch. Re-write VEC in C++.
* call.c (add_function_candidate): Remove const qualifier
from call to VEC_index.
2012-08-14 Diego Novillo <dnovillo@google.com>
Merge from cxx-conversion branch. Configury.
* go-c.h: Remove all handlers of ENABLE_BUILD_WITH_CXX.
* go-gcc.cc: Likewise.
* go-system.h: Likewise.
From-SVN: r190402
2012-08-15 03:56:07 +02:00
boot_language=yes
configure.ac: Add --enable-build-with-cxx.
./: * configure.ac: Add --enable-build-with-cxx. When set, add c++ to
boot_languages. Only bootstrap target libraries listed in
target_libs for some boot language. Add --with-stage1-ldflags,
--with-stage1-libs, --with-boot-ldflags, --with-boot-libs. Remove
with_host_libstdcxx from ppllibs. Only add -fkeep-inline-functions
if not building with C++.
* Makefile.def: For target_module libstdc++-v3, set bootstrap=true.
* Makefile.tpl (STAGE1_LDFLAGS, STAGE1_LIBS): New variables.
(POSTSTAGE1_LDFLAGS, POSTSTAGE1_LIBS): New variables.
(HOST_EXPORTS): Add STAGE1_LDFLAGS to LDFLAGS. Export HOST_LIBS.
(POSTSTAGE1_HOST_EXPORTS): Set CXX and CXX_FOR_BUILD. Add
POSTSTAGE1_LDFLAGS to LDFLAGS. Export HOST_LIBS.
(POSTSTAGE1_FLAGS_TO_PASS): Likewise.
* configure, Makefile.in: Rebuild.
gcc/:
* configure.ac: Invoke AC_PROG_CXX. Separate C specific warnings
from loose_warn into c_loose_warn and from strict_warn into
c_strict_warn. Set and substitute warn_cxxflags. Check for
--enable-build-with-cxx. Set and substitute
ENABLE_BUILD_WITH_CXX. Set and substitute HOST_LIBS.
* Makefile.in (CXXFLAGS): New variable.
(C_LOOSE_WARN, C_STRICT_WARN): New variables.
(GCC_WARN_CFLAGS): Add $(C_LOOSE_WARN). Add $(C_STRICT_WARN) if
the default is the same as $(STRICT_WARN).
(GCC_WARN_CXXFLAGS, WARN_CXXFLAGS): New variables.
(CXX): New variable.
(COMPILER): New value if ENABLE_BUILD_WITH_CXX.
(COMPILER_FLAGS, LINKER, LINKER_FLAGS): Likewise.
(ALL_COMPILERFLAGS, ALL_LINKERFLAGS): Likewise.
(HOST_LIBS): New variable.
(GCC_CFLAGS): Add $(C_LOOSE_WARN).
(ALL_CXXFLAGS): New variable.
(LIBS, BACKENDLIBS): Add $(HOST_LIBS).
* doc/install.texi (Configuration): Document
--enable-build-with-cxx, --with-stage1-ldflags,
--with-stage1-libs, --with-boot-ldflags, --with-boot-libs.
* configure: Rebuild.
From-SVN: r148889
2009-06-24 06:03:51 +02:00
fi
2012-09-04 20:49:41 +02:00
add_this_lang=no
2006-12-29 17:58:48 +01:00
case ,${enable_languages}, in
*,${language},*)
2012-06-29 18:12:35 +02:00
# Language was explicitly selected; include it
# unless it is C, which is enabled by default.
if test "$language" != "c"; then
add_this_lang=yes
fi
2004-03-11 06:01:17 +01:00
;;
2006-12-29 17:58:48 +01:00
*,all,*)
# 'all' was selected, select it if it is a default language
2012-09-04 20:49:41 +02:00
if test "$language" != "c"; then
add_this_lang=${build_by_default}
fi
2004-03-11 06:01:17 +01:00
;;
esac
2004-05-13 08:41:07 +02:00
2006-07-03 09:58:08 +02:00
# Disable languages that need other directories if these aren't available.
2006-07-03 13:19:01 +02:00
for i in $subdir_requires; do
2006-07-03 11:25:46 +02:00
test -f "$srcdir/gcc/$i/config-lang.in" && continue
2006-07-03 09:58:08 +02:00
case ,${enable_languages}, in
*,${language},*)
# Specifically requested language; tell them.
AC_MSG_ERROR([The gcc/$i directory contains parts of $language but is missing])
;;
*)
# Silently disable.
2006-12-29 17:58:48 +01:00
add_this_lang=unsupported
2006-07-03 09:58:08 +02:00
;;
esac
done
2006-12-29 17:58:48 +01:00
# Disable Ada if no preexisting GNAT is available.
case ,${enable_languages},:${language}:${have_gnat} in
*,${language},*:ada:no)
# Specifically requested language; tell them.
AC_MSG_ERROR([GNAT is required to build $language])
;;
*:ada:no)
# Silently disable.
add_this_lang=unsupported
;;
esac
2005-06-07 01:39:28 +02:00
# Disable a language that is unsupported by the target.
case " $unsupported_languages " in
*" $language "*)
2006-12-29 17:58:48 +01:00
add_this_lang=unsupported
2005-06-07 01:39:28 +02:00
;;
esac
2004-05-13 08:41:07 +02:00
case $add_this_lang in
2006-12-29 17:58:48 +01:00
unsupported)
2004-03-11 06:01:17 +01:00
# Remove language-dependent dirs.
2010-11-21 02:49:05 +01:00
disabled_target_libs="$disabled_target_libs $target_libs"
noconfigdirs="$noconfigdirs $lang_dirs"
2004-03-16 01:03:30 +01:00
;;
2006-12-29 17:58:48 +01:00
no)
# Remove language-dependent dirs; still show language as supported.
2010-11-21 02:49:05 +01:00
disabled_target_libs="$disabled_target_libs $target_libs"
noconfigdirs="$noconfigdirs $lang_dirs"
2006-12-29 17:58:48 +01:00
potential_languages="${potential_languages}${language},"
;;
yes)
new_enable_languages="${new_enable_languages}${language},"
potential_languages="${potential_languages}${language},"
2004-03-16 01:03:30 +01:00
missing_languages=`echo "$missing_languages" | sed "s/,$language,/,/"`
2010-11-21 02:49:05 +01:00
enabled_target_libs="$enabled_target_libs $target_libs"
2009-09-21 22:31:18 +02:00
case "${boot_language}:,$enable_stage1_languages," in
yes:* | *:*,$language,* | *:*,yes, | *:*,all,)
2004-03-22 09:38:04 +01:00
# Add to (comma-separated) list of stage 1 languages.
2009-09-21 22:31:18 +02:00
case ",$stage1_languages," in
*,$language,* | ,yes, | ,all,) ;;
*) stage1_languages="${stage1_languages}${language}," ;;
esac
configure.ac: Add --enable-build-with-cxx.
./: * configure.ac: Add --enable-build-with-cxx. When set, add c++ to
boot_languages. Only bootstrap target libraries listed in
target_libs for some boot language. Add --with-stage1-ldflags,
--with-stage1-libs, --with-boot-ldflags, --with-boot-libs. Remove
with_host_libstdcxx from ppllibs. Only add -fkeep-inline-functions
if not building with C++.
* Makefile.def: For target_module libstdc++-v3, set bootstrap=true.
* Makefile.tpl (STAGE1_LDFLAGS, STAGE1_LIBS): New variables.
(POSTSTAGE1_LDFLAGS, POSTSTAGE1_LIBS): New variables.
(HOST_EXPORTS): Add STAGE1_LDFLAGS to LDFLAGS. Export HOST_LIBS.
(POSTSTAGE1_HOST_EXPORTS): Set CXX and CXX_FOR_BUILD. Add
POSTSTAGE1_LDFLAGS to LDFLAGS. Export HOST_LIBS.
(POSTSTAGE1_FLAGS_TO_PASS): Likewise.
* configure, Makefile.in: Rebuild.
gcc/:
* configure.ac: Invoke AC_PROG_CXX. Separate C specific warnings
from loose_warn into c_loose_warn and from strict_warn into
c_strict_warn. Set and substitute warn_cxxflags. Check for
--enable-build-with-cxx. Set and substitute
ENABLE_BUILD_WITH_CXX. Set and substitute HOST_LIBS.
* Makefile.in (CXXFLAGS): New variable.
(C_LOOSE_WARN, C_STRICT_WARN): New variables.
(GCC_WARN_CFLAGS): Add $(C_LOOSE_WARN). Add $(C_STRICT_WARN) if
the default is the same as $(STRICT_WARN).
(GCC_WARN_CXXFLAGS, WARN_CXXFLAGS): New variables.
(CXX): New variable.
(COMPILER): New value if ENABLE_BUILD_WITH_CXX.
(COMPILER_FLAGS, LINKER, LINKER_FLAGS): Likewise.
(ALL_COMPILERFLAGS, ALL_LINKERFLAGS): Likewise.
(HOST_LIBS): New variable.
(GCC_CFLAGS): Add $(C_LOOSE_WARN).
(ALL_CXXFLAGS): New variable.
(LIBS, BACKENDLIBS): Add $(HOST_LIBS).
* doc/install.texi (Configuration): Document
--enable-build-with-cxx, --with-stage1-ldflags,
--with-stage1-libs, --with-boot-ldflags, --with-boot-libs.
* configure: Rebuild.
From-SVN: r148889
2009-06-24 06:03:51 +02:00
# We need to bootstrap any supporting libraries.
bootstrap_target_libs="${bootstrap_target_libs}${target_libs},"
2004-03-16 01:03:30 +01:00
;;
esac
;;
2004-03-11 06:01:17 +01:00
esac
;;
esac
done
2010-11-21 02:49:05 +01:00
# Add target libraries which are only needed for disabled languages
# to noconfigdirs.
if test -n "$disabled_target_libs"; then
for dir in $disabled_target_libs; do
case " $enabled_target_libs " in
*" ${dir} "*) ;;
*) noconfigdirs="$noconfigdirs $dir" ;;
esac
done
fi
2006-12-29 17:58:48 +01:00
AC_ARG_ENABLE(stage1-languages,
2011-01-21 14:18:23 +01:00
[AS_HELP_STRING([[--enable-stage1-languages[=all]]],
[choose additional languages to build during
stage1. Mostly useful for compiler development])],
2006-12-29 17:58:48 +01:00
[case ,${enable_stage1_languages}, in
,no,|,,)
# Set it to something that will have no effect in the loop below
enable_stage1_languages=c ;;
,yes,)
enable_stage1_languages=`echo $new_enable_languages | \
sed -e "s/^,//" -e "s/,$//" ` ;;
*,all,*)
enable_stage1_languages=`echo ,$enable_stage1_languages, | \
sed -e "s/,all,/$new_enable_languages/" -e "s/^,//" -e "s/,$//" ` ;;
esac
# Add "good" languages from enable_stage1_languages to stage1_languages,
# while "bad" languages go in missing_languages. Leave no duplicates.
for i in `echo $enable_stage1_languages | sed 's/,/ /g' `; do
case $potential_languages in
*,$i,*)
case $stage1_languages in
*,$i,*) ;;
*) stage1_languages="$stage1_languages$i," ;;
esac ;;
*)
case $missing_languages in
*,$i,*) ;;
*) missing_languages="$missing_languages$i," ;;
esac ;;
esac
done])
# Remove leading/trailing commas that were added for simplicity
potential_languages=`echo "$potential_languages" | sed -e "s/^,//" -e "s/,$//"`
2004-03-12 13:10:17 +01:00
missing_languages=`echo "$missing_languages" | sed -e "s/^,//" -e "s/,$//"`
2006-12-29 17:58:48 +01:00
stage1_languages=`echo "$stage1_languages" | sed -e "s/^,//" -e "s/,$//"`
new_enable_languages=`echo "$new_enable_languages" | sed -e "s/^,//" -e "s/,$//"`
2004-03-11 06:01:17 +01:00
if test "x$missing_languages" != x; then
AC_MSG_ERROR([
2005-05-19 22:03:22 +02:00
The following requested languages could not be built: ${missing_languages}
2006-12-29 17:58:48 +01:00
Supported languages are: ${potential_languages}])
2004-03-11 06:01:17 +01:00
fi
if test "x$new_enable_languages" != "x$enable_languages"; then
echo The following languages will be built: ${new_enable_languages}
2006-12-29 17:58:48 +01:00
enable_languages="$new_enable_languages"
2004-03-11 06:01:17 +01:00
fi
2006-12-29 17:58:48 +01:00
AC_SUBST(stage1_languages)
2007-02-18 23:45:12 +01:00
ac_configure_args=`echo " $ac_configure_args" | sed -e "s/ '--enable-languages=[[^ ]]*'//g" -e "s/$/ '--enable-languages="$enable_languages"'/" `
2004-03-11 06:01:17 +01:00
fi
2006-03-10 22:32:39 +01:00
# Handle --disable-<component> generically.
for dir in $configdirs $build_configdirs $target_configdirs ; do
dirname=`echo $dir | sed -e s/target-//g -e s/build-//g -e s/-/_/g`
2008-01-30 14:36:35 +01:00
varname=`echo $dirname | sed -e s/+/_/g`
if eval test x\${enable_${varname}} "=" xno ; then
2006-03-10 22:32:39 +01:00
noconfigdirs="$noconfigdirs $dir"
fi
done
2016-10-04 11:00:27 +02:00
# Check for Boehm's garbage collector
AC_ARG_ENABLE(objc-gc,
[AS_HELP_STRING([--enable-objc-gc],
[enable use of Boehm's garbage collector with the
2016-11-30 01:12:45 +01:00
GNU Objective-C runtime])])
AC_ARG_WITH([target-bdw-gc],
[AS_HELP_STRING([--with-target-bdw-gc=PATHLIST],
[specify prefix directory for installed bdw-gc package.
Equivalent to --with-target-bdw-gc-include=PATH/include
plus --with-target-bdw-gc-lib=PATH/lib])])
AC_ARG_WITH([target-bdw-gc-include],
[AS_HELP_STRING([--with-target-bdw-gc-include=PATHLIST],
[specify directories for installed bdw-gc include files])])
AC_ARG_WITH([target-bdw-gc-lib],
[AS_HELP_STRING([--with-target-bdw-gc-lib=PATHLIST],
[specify directories for installed bdw-gc library])])
case ,${enable_languages},:${enable_objc_gc} in *,objc,*:yes|*,objc,*:auto)
AC_MSG_CHECKING([for bdw garbage collector])
if test "x$with_target_bdw_gc$with_target_bdw_gc_include$with_target_bdw_gc_lib" = x; then
2016-12-01 13:31:49 +01:00
dnl no bdw-gw options, assume default locations
AC_MSG_RESULT([using bdw-gc in default locations])
2016-11-30 01:12:45 +01:00
else
dnl bdw-gw options, first error checking, complete checking in libobjc
if test "x$with_target_bdw_gc_include" = x && test "x$with_target_bdw_gc_lib" != x; then
AC_MSG_ERROR([found --with-target-bdw-gc-lib but --with-target-bdw-gc-include missing])
elif test "x$with_target_bdw_gc_include" != x && test "x$with_target_bdw_gc_lib" = x; then
AC_MSG_ERROR([found --with-target-bdw-gc-include but --with-target-bdw-gc-lib missing])
else
AC_MSG_RESULT([using paths configured with --with-target-bdw-gc options])
fi
fi
2016-10-04 11:00:27 +02:00
esac
2014-11-13 15:03:17 +01:00
# Disable libcilkrts, libitm, libsanitizer, libvtv, liboffloadmic if we're not building C++
2012-01-05 02:35:25 +01:00
case ,${enable_languages}, in
2014-05-30 19:16:14 +02:00
*,c++,*)
# Disable libcilkrts, libitm, libsanitizer if we're not building libstdc++
case "${noconfigdirs}" in
*target-libstdc++-v3*)
noconfigdirs="$noconfigdirs target-libcilkrts target-libitm target-libsanitizer"
;;
*) ;;
esac
;;
2012-01-05 02:35:25 +01:00
*)
2014-11-13 15:03:17 +01:00
noconfigdirs="$noconfigdirs target-libcilkrts target-liboffloadmic target-libitm target-libsanitizer target-libvtv"
2012-01-05 02:35:25 +01:00
;;
esac
2006-06-06 18:05:47 +02:00
2004-10-26 22:31:09 +02:00
# Remove the entries in $skipdirs and $noconfigdirs from $configdirs,
# $build_configdirs and $target_configdirs.
2004-03-11 06:01:17 +01:00
# If we have the source for $noconfigdirs entries, add them to $notsupp.
notsupp=""
for dir in . $skipdirs $noconfigdirs ; do
2004-10-26 22:31:09 +02:00
dirname=`echo $dir | sed -e s/target-//g -e s/build-//g`
2004-03-11 06:01:17 +01:00
if test $dir != . && echo " ${configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
configdirs=`echo " ${configdirs} " | sed -e "s/ ${dir} / /"`
if test -r $srcdir/$dirname/configure ; then
if echo " ${skipdirs} " | grep " ${dir} " >/dev/null 2>&1; then
true
else
notsupp="$notsupp $dir"
fi
fi
fi
2004-10-26 22:31:09 +02:00
if test $dir != . && echo " ${build_configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
build_configdirs=`echo " ${build_configdirs} " | sed -e "s/ ${dir} / /"`
if test -r $srcdir/$dirname/configure ; then
if echo " ${skipdirs} " | grep " ${dir} " >/dev/null 2>&1; then
true
else
notsupp="$notsupp $dir"
fi
fi
fi
2004-03-11 06:01:17 +01:00
if test $dir != . && echo " ${target_configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
target_configdirs=`echo " ${target_configdirs} " | sed -e "s/ ${dir} / /"`
if test -r $srcdir/$dirname/configure ; then
if echo " ${skipdirs} " | grep " ${dir} " >/dev/null 2>&1; then
true
else
notsupp="$notsupp $dir"
fi
fi
fi
done
# Quietly strip out all directories which aren't configurable in this tree.
# This relies on all configurable subdirectories being autoconfiscated, which
# is now the case.
Makefile.def (build_modules): Add bison, byacc, flex, m4, texinfo.
2004-07-01 Paolo Bonzini <bonzini@gnu.org>
* Makefile.def (build_modules): Add bison, byacc, flex,
m4, texinfo.
(flags_to_pass): Add FLEX.
* Makefile.tpl (BUILD_DIR_PREFIX, BASE_EXPORTS): New.
(BUILD_EXPORTS, HOST_EXPORTS, BASE_TARGET_EXPORTS): Include it.
(DEFAULT_YACC, USUAL_YACC, DEFAULT_LEX, USUAL_LEX, DEFAULT_M4,
DEFAULT_MAKEINFO): Remove.
(CONFIGURED_YACC, CONFIGURED_FLEX, CONFIGURED_BISON,
CONFIGURED_LEX, CONFIGURED_M4, CONFIGURED_MAKEINFO): Substitute.
(YACC, FLEX, BISON, LEX, M4, MAKEINFO): Define to look into
objdir or else use configured tool.
(all-build): New.
(all): Depend on it.
(Build module dependencies): Add.
* Makefile.in: Regenerate.
* configure.in: Better support for multiple build modules,
matching what is done for host/target modules. Do not look
for "plausible" locations of build tools if Canadian cross.
Use autoconf's AC_PROG_CC to find a C compiler. Define
BUILD_DIR_PREFIX. Look for flex, makeinfo and m4.
* configure: Regenerate.
From-SVN: r84017
2004-07-02 09:55:37 +02:00
build_configdirs_all="$build_configdirs"
build_configdirs=
for i in ${build_configdirs_all} ; do
j=`echo $i | sed -e s/build-//g`
if test -f ${srcdir}/$j/configure ; then
build_configdirs="${build_configdirs} $i"
fi
done
2004-03-11 06:01:17 +01:00
configdirs_all="$configdirs"
configdirs=
for i in ${configdirs_all} ; do
if test -f ${srcdir}/$i/configure ; then
configdirs="${configdirs} $i"
fi
done
Makefile.def (build_modules): Add bison, byacc, flex, m4, texinfo.
2004-07-01 Paolo Bonzini <bonzini@gnu.org>
* Makefile.def (build_modules): Add bison, byacc, flex,
m4, texinfo.
(flags_to_pass): Add FLEX.
* Makefile.tpl (BUILD_DIR_PREFIX, BASE_EXPORTS): New.
(BUILD_EXPORTS, HOST_EXPORTS, BASE_TARGET_EXPORTS): Include it.
(DEFAULT_YACC, USUAL_YACC, DEFAULT_LEX, USUAL_LEX, DEFAULT_M4,
DEFAULT_MAKEINFO): Remove.
(CONFIGURED_YACC, CONFIGURED_FLEX, CONFIGURED_BISON,
CONFIGURED_LEX, CONFIGURED_M4, CONFIGURED_MAKEINFO): Substitute.
(YACC, FLEX, BISON, LEX, M4, MAKEINFO): Define to look into
objdir or else use configured tool.
(all-build): New.
(all): Depend on it.
(Build module dependencies): Add.
* Makefile.in: Regenerate.
* configure.in: Better support for multiple build modules,
matching what is done for host/target modules. Do not look
for "plausible" locations of build tools if Canadian cross.
Use autoconf's AC_PROG_CC to find a C compiler. Define
BUILD_DIR_PREFIX. Look for flex, makeinfo and m4.
* configure: Regenerate.
From-SVN: r84017
2004-07-02 09:55:37 +02:00
2004-03-11 06:01:17 +01:00
target_configdirs_all="$target_configdirs"
target_configdirs=
for i in ${target_configdirs_all} ; do
j=`echo $i | sed -e s/target-//g`
if test -f ${srcdir}/$j/configure ; then
target_configdirs="${target_configdirs} $i"
fi
done
2014-06-13 16:32:16 +02:00
# libiberty-linker-plugin is special: it doesn't have its own source directory,
# so we have to add it after the preceding checks.
if test x"$extra_linker_plugin_flags$extra_linker_plugin_configure_flags" != x
then
case " $configdirs " in
*" libiberty "*)
# If we can build libiberty, we can also build libiberty-linker-plugin.
configdirs="$configdirs libiberty-linker-plugin"
extra_linker_plugin_configure_flags="$extra_linker_plugin_configure_flags \
--with-libiberty=../libiberty-linker-plugin";;
*)
AC_MSG_ERROR([libiberty missing]);;
esac
fi
2014-10-30 11:06:37 +01:00
# Sometimes we have special requirements for the host libiberty.
extra_host_libiberty_configure_flags=
2015-07-14 17:03:11 +02:00
extra_host_zlib_configure_flags=
2014-10-30 11:06:37 +01:00
case " $configdirs " in
*" lto-plugin "* | *" libcc1 "*)
# When these are to be built as shared libraries, the same applies to
# libiberty.
extra_host_libiberty_configure_flags=--enable-shared
;;
2015-07-14 17:03:11 +02:00
*" bfd "*)
# When bfd is to be built as a shared library, the same applies to
# zlib.
if test "$enable_shared" = "yes"; then
extra_host_zlib_configure_flags=--enable-host-shared
fi
;;
2014-10-30 11:06:37 +01:00
esac
AC_SUBST(extra_host_libiberty_configure_flags)
2015-07-14 17:03:11 +02:00
AC_SUBST(extra_host_zlib_configure_flags)
2014-10-30 11:06:37 +01:00
2004-03-11 06:01:17 +01:00
# Produce a warning message for the subdirs we can't configure.
# This isn't especially interesting in the Cygnus tree, but in the individual
# FSF releases, it's important to let people know when their machine isn't
# supported by the one or two programs in a package.
if test -n "${notsupp}" && test -z "${norecursion}" ; then
# If $appdirs is non-empty, at least one of those directories must still
# be configured, or we error out. (E.g., if the gas release supports a
# specified target in some subdirs but not the gas subdir, we shouldn't
# pretend that all is well.)
if test -n "$appdirs" ; then
for dir in $appdirs ; do
if test -r $dir/Makefile.in ; then
if echo " ${configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
appdirs=""
break
fi
Makefile.def (build_modules): Add bison, byacc, flex, m4, texinfo.
2004-07-01 Paolo Bonzini <bonzini@gnu.org>
* Makefile.def (build_modules): Add bison, byacc, flex,
m4, texinfo.
(flags_to_pass): Add FLEX.
* Makefile.tpl (BUILD_DIR_PREFIX, BASE_EXPORTS): New.
(BUILD_EXPORTS, HOST_EXPORTS, BASE_TARGET_EXPORTS): Include it.
(DEFAULT_YACC, USUAL_YACC, DEFAULT_LEX, USUAL_LEX, DEFAULT_M4,
DEFAULT_MAKEINFO): Remove.
(CONFIGURED_YACC, CONFIGURED_FLEX, CONFIGURED_BISON,
CONFIGURED_LEX, CONFIGURED_M4, CONFIGURED_MAKEINFO): Substitute.
(YACC, FLEX, BISON, LEX, M4, MAKEINFO): Define to look into
objdir or else use configured tool.
(all-build): New.
(all): Depend on it.
(Build module dependencies): Add.
* Makefile.in: Regenerate.
* configure.in: Better support for multiple build modules,
matching what is done for host/target modules. Do not look
for "plausible" locations of build tools if Canadian cross.
Use autoconf's AC_PROG_CC to find a C compiler. Define
BUILD_DIR_PREFIX. Look for flex, makeinfo and m4.
* configure: Regenerate.
From-SVN: r84017
2004-07-02 09:55:37 +02:00
if echo " ${target_configdirs} " | grep " target-${dir} " >/dev/null 2>&1; then
2004-03-11 06:01:17 +01:00
appdirs=""
break
fi
fi
done
if test -n "$appdirs" ; then
echo "*** This configuration is not supported by this package." 1>&2
exit 1
fi
fi
# Okay, some application will build, or we don't care to check. Still
# notify of subdirs not getting built.
echo "*** This configuration is not supported in the following subdirectories:" 1>&2
echo " ${notsupp}" 1>&2
echo " (Any other directories should still work fine.)" 1>&2
fi
case "$host" in
*msdosdjgpp*)
enable_gdbtk=no ;;
esac
2007-02-13 14:39:19 +01:00
# To find our prefix, in gcc_cv_tool_prefix.
ACX_TOOL_DIRS
2004-03-11 06:01:17 +01:00
copy_dirs=
2005-07-26 17:56:56 +02:00
AC_ARG_WITH([build-sysroot],
2011-01-21 14:18:23 +01:00
[AS_HELP_STRING([--with-build-sysroot=SYSROOT],
[use sysroot as the system root during the build])],
2005-07-26 17:56:56 +02:00
[if test x"$withval" != x ; then
SYSROOT_CFLAGS_FOR_TARGET="--sysroot=$withval"
fi],
[SYSROOT_CFLAGS_FOR_TARGET=])
AC_SUBST(SYSROOT_CFLAGS_FOR_TARGET)
Makefile.tpl (DEBUG_PREFIX_CFLAGS_FOR_TARGET): New.
2007-08-18 Paul Brook <paul@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* Makefile.tpl (DEBUG_PREFIX_CFLAGS_FOR_TARGET): New.
(CFLAGS_FOR_TARGET, CXXFLAGS_FOR_TARGET): Include it.
* Makefile.in: Regenerate.
* configure.ac (--with-debug-prefix-map): New.
* configure: Regenerate.
config:
2007-08-18 Paul Brook <paul@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* mt-gnu (CXXFLAGS_FOR_TARGET): Add
$(DEBUG_PREFIX_CFLAGS_FOR_TARGET).
gcc:
2007-08-18 Paul Brook <paul@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* common.opt (-fdebug-prefix-map=): New option.
* opts.c: Include debug.h.
(common_handle_option): Handle -fdebug-prefix-map.
* final.c: Include ggc.h.
(struct debug_prefix_map, debug_prefix_maps, add_debug_prefix_map,
remap_debug_filename): New.
* Makefile.in (final.o, opts.o): Update dependencies.
* debug.h (remap_debug_filename, add_debug_prefix_map): Declare.
* configure.ac: Check for assembler --debug-prefix-map support.
* configure, config.in: Regenerate.
* gcc.c (ASM_MAP): Define conditional on HAVE_AS_DEBUG_PREFIX_MAP.
(ASM_DEBUG_SPEC): Include ASM_MAP.
* doc/install.texi (--with-debug-prefix-map): Document.
* doc/invoke.texi (-fdebug-prefix-map): Document.
* dbxout.c (dbxout_init, dbxout_start_source_file,
dbxout_source_file): Call remap_debug_filename.
* dwarf2out.c (add_comp_dir_attribute, maybe_emit_file,
dwarf2out_start_source_file, dwarf2out_finish): Call
remap_debug_filename.
(file_table_relative_p): Do not check d->emitted_number.
* toplev.c (output_file_directive): Call remap_debug_filename.
* vmsdbgout.c (write_srccorr): Call remap_debug_filename.
* xcoffout.c (xcoffout_source_file): Call remap_debug_filename.
Co-Authored-By: Joseph Myers <joseph@codesourcery.com>
From-SVN: r127613
2007-08-18 17:15:39 +02:00
AC_ARG_WITH([debug-prefix-map],
2011-01-21 14:18:23 +01:00
[AS_HELP_STRING([--with-debug-prefix-map='A=B C=D ...'],
[map A to B, C to D ... in debug information])],
Makefile.tpl (DEBUG_PREFIX_CFLAGS_FOR_TARGET): New.
2007-08-18 Paul Brook <paul@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* Makefile.tpl (DEBUG_PREFIX_CFLAGS_FOR_TARGET): New.
(CFLAGS_FOR_TARGET, CXXFLAGS_FOR_TARGET): Include it.
* Makefile.in: Regenerate.
* configure.ac (--with-debug-prefix-map): New.
* configure: Regenerate.
config:
2007-08-18 Paul Brook <paul@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* mt-gnu (CXXFLAGS_FOR_TARGET): Add
$(DEBUG_PREFIX_CFLAGS_FOR_TARGET).
gcc:
2007-08-18 Paul Brook <paul@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* common.opt (-fdebug-prefix-map=): New option.
* opts.c: Include debug.h.
(common_handle_option): Handle -fdebug-prefix-map.
* final.c: Include ggc.h.
(struct debug_prefix_map, debug_prefix_maps, add_debug_prefix_map,
remap_debug_filename): New.
* Makefile.in (final.o, opts.o): Update dependencies.
* debug.h (remap_debug_filename, add_debug_prefix_map): Declare.
* configure.ac: Check for assembler --debug-prefix-map support.
* configure, config.in: Regenerate.
* gcc.c (ASM_MAP): Define conditional on HAVE_AS_DEBUG_PREFIX_MAP.
(ASM_DEBUG_SPEC): Include ASM_MAP.
* doc/install.texi (--with-debug-prefix-map): Document.
* doc/invoke.texi (-fdebug-prefix-map): Document.
* dbxout.c (dbxout_init, dbxout_start_source_file,
dbxout_source_file): Call remap_debug_filename.
* dwarf2out.c (add_comp_dir_attribute, maybe_emit_file,
dwarf2out_start_source_file, dwarf2out_finish): Call
remap_debug_filename.
(file_table_relative_p): Do not check d->emitted_number.
* toplev.c (output_file_directive): Call remap_debug_filename.
* vmsdbgout.c (write_srccorr): Call remap_debug_filename.
* xcoffout.c (xcoffout_source_file): Call remap_debug_filename.
Co-Authored-By: Joseph Myers <joseph@codesourcery.com>
From-SVN: r127613
2007-08-18 17:15:39 +02:00
[if test x"$withval" != x; then
DEBUG_PREFIX_CFLAGS_FOR_TARGET=
for debug_map in $withval; do
DEBUG_PREFIX_CFLAGS_FOR_TARGET="$DEBUG_PREFIX_CFLAGS_FOR_TARGET -fdebug-prefix-map=$debug_map"
done
fi],
[DEBUG_PREFIX_CFLAGS_FOR_TARGET=])
AC_SUBST(DEBUG_PREFIX_CFLAGS_FOR_TARGET)
re PR bootstrap/32009 (building gcc4-4.3/4.4.0-20070518 failed on OSX 10.3.9)
2008-02-20 Paolo Bonzini <bonzini@gnu.org>
PR bootstrap/32009
PR bootstrap/32161
* configure.ac (CFLAGS_FOR_TARGET, CXXFLAGS_FOR_TARGET): Compute here.
* configure: Regenerate.
* Makefile.def: Define stage_libcflags for all bootstrap stages.
* Makefile.tpl (STAGE1_LIBCFLAGS, STAGE2_LIBCFLAGS, STAGE3_LIBCFLAGS,
STAGE4_LIBCFLAGS): New.
(CFLAGS_FOR_TARGET, CXXFLAGS_FOR_TARGET): Subst from autoconf, without
$(SYSROOT_CFLAGS_FOR_TARGET) and $(DEBUG_PREFIX_CFLAGS_FOR_TARGET).
(BASE_TARGET_EXPORTS): Append them here to C{,XX}FLAGS.
(EXTRA_TARGET_FLAGS): Append them here to {LIB,}C{,XX}FLAGS.
(configure-stage[+id+]-[+prefix+][+module+]): Pass stage_libcflags
for target modules. Don't export LIBCFLAGS.
(all-stage[+id+]-[+prefix+][+module+]): Pass stage_libcflags; pass
$(BASE_FLAGS_TO_PASS) where [+args+] was passed, and [+args+] after
the overridden CFLAGS_FOR_TARGET and CXXFLAGS_FOR_TARGET.
(invocations of `all'): Replace $(TARGET_FLAGS_TO_PASS) with
$(EXTRA_TARGET_FLAGS), $(FLAGS_TO_PASS) with $(EXTRA_HOST_FLAGS).
* Makefile.in: Regenerate.
2008-02-20 Paolo Bonzini <bonzini@gnu.org>
PR bootstrap/32009
* mh-ppc-darwin (BOOT_CFLAGS): Reenable.
2008-02-20 Paolo Bonzini <bonzini@gnu.org>
* doc/install.texi: Correct references to CFLAGS, replacing them
with BOOT_CFLAGS. Document flags used during bootstrap for
target libraries.
From-SVN: r132479
2008-02-20 15:10:40 +01:00
# During gcc bootstrap, if we use some random cc for stage1 then CFLAGS
# might be empty or "-g". We don't require a C++ compiler, so CXXFLAGS
# might also be empty (or "-g", if a non-GCC C++ compiler is in the path).
# We want to ensure that TARGET libraries (which we know are built with
# gcc) are built with "-O2 -g", so include those options when setting
# CFLAGS_FOR_TARGET and CXXFLAGS_FOR_TARGET.
if test "x$CFLAGS_FOR_TARGET" = x; then
2015-03-10 17:37:53 +01:00
if test "x${is_cross_compiler}" = xyes; then
CFLAGS_FOR_TARGET="-g -O2"
else
CFLAGS_FOR_TARGET=$CFLAGS
case " $CFLAGS " in
*" -O2 "*) ;;
*) CFLAGS_FOR_TARGET="-O2 $CFLAGS_FOR_TARGET" ;;
esac
case " $CFLAGS " in
*" -g "* | *" -g3 "*) ;;
*) CFLAGS_FOR_TARGET="-g $CFLAGS_FOR_TARGET" ;;
esac
fi
re PR bootstrap/32009 (building gcc4-4.3/4.4.0-20070518 failed on OSX 10.3.9)
2008-02-20 Paolo Bonzini <bonzini@gnu.org>
PR bootstrap/32009
PR bootstrap/32161
* configure.ac (CFLAGS_FOR_TARGET, CXXFLAGS_FOR_TARGET): Compute here.
* configure: Regenerate.
* Makefile.def: Define stage_libcflags for all bootstrap stages.
* Makefile.tpl (STAGE1_LIBCFLAGS, STAGE2_LIBCFLAGS, STAGE3_LIBCFLAGS,
STAGE4_LIBCFLAGS): New.
(CFLAGS_FOR_TARGET, CXXFLAGS_FOR_TARGET): Subst from autoconf, without
$(SYSROOT_CFLAGS_FOR_TARGET) and $(DEBUG_PREFIX_CFLAGS_FOR_TARGET).
(BASE_TARGET_EXPORTS): Append them here to C{,XX}FLAGS.
(EXTRA_TARGET_FLAGS): Append them here to {LIB,}C{,XX}FLAGS.
(configure-stage[+id+]-[+prefix+][+module+]): Pass stage_libcflags
for target modules. Don't export LIBCFLAGS.
(all-stage[+id+]-[+prefix+][+module+]): Pass stage_libcflags; pass
$(BASE_FLAGS_TO_PASS) where [+args+] was passed, and [+args+] after
the overridden CFLAGS_FOR_TARGET and CXXFLAGS_FOR_TARGET.
(invocations of `all'): Replace $(TARGET_FLAGS_TO_PASS) with
$(EXTRA_TARGET_FLAGS), $(FLAGS_TO_PASS) with $(EXTRA_HOST_FLAGS).
* Makefile.in: Regenerate.
2008-02-20 Paolo Bonzini <bonzini@gnu.org>
PR bootstrap/32009
* mh-ppc-darwin (BOOT_CFLAGS): Reenable.
2008-02-20 Paolo Bonzini <bonzini@gnu.org>
* doc/install.texi: Correct references to CFLAGS, replacing them
with BOOT_CFLAGS. Document flags used during bootstrap for
target libraries.
From-SVN: r132479
2008-02-20 15:10:40 +01:00
fi
AC_SUBST(CFLAGS_FOR_TARGET)
if test "x$CXXFLAGS_FOR_TARGET" = x; then
2015-03-10 17:37:53 +01:00
if test "x${is_cross_compiler}" = xyes; then
CXXFLAGS_FOR_TARGET="-g -O2"
else
CXXFLAGS_FOR_TARGET=$CXXFLAGS
case " $CXXFLAGS " in
*" -O2 "*) ;;
*) CXXFLAGS_FOR_TARGET="-O2 $CXXFLAGS_FOR_TARGET" ;;
esac
case " $CXXFLAGS " in
*" -g "* | *" -g3 "*) ;;
*) CXXFLAGS_FOR_TARGET="-g $CXXFLAGS_FOR_TARGET" ;;
esac
fi
re PR bootstrap/32009 (building gcc4-4.3/4.4.0-20070518 failed on OSX 10.3.9)
2008-02-20 Paolo Bonzini <bonzini@gnu.org>
PR bootstrap/32009
PR bootstrap/32161
* configure.ac (CFLAGS_FOR_TARGET, CXXFLAGS_FOR_TARGET): Compute here.
* configure: Regenerate.
* Makefile.def: Define stage_libcflags for all bootstrap stages.
* Makefile.tpl (STAGE1_LIBCFLAGS, STAGE2_LIBCFLAGS, STAGE3_LIBCFLAGS,
STAGE4_LIBCFLAGS): New.
(CFLAGS_FOR_TARGET, CXXFLAGS_FOR_TARGET): Subst from autoconf, without
$(SYSROOT_CFLAGS_FOR_TARGET) and $(DEBUG_PREFIX_CFLAGS_FOR_TARGET).
(BASE_TARGET_EXPORTS): Append them here to C{,XX}FLAGS.
(EXTRA_TARGET_FLAGS): Append them here to {LIB,}C{,XX}FLAGS.
(configure-stage[+id+]-[+prefix+][+module+]): Pass stage_libcflags
for target modules. Don't export LIBCFLAGS.
(all-stage[+id+]-[+prefix+][+module+]): Pass stage_libcflags; pass
$(BASE_FLAGS_TO_PASS) where [+args+] was passed, and [+args+] after
the overridden CFLAGS_FOR_TARGET and CXXFLAGS_FOR_TARGET.
(invocations of `all'): Replace $(TARGET_FLAGS_TO_PASS) with
$(EXTRA_TARGET_FLAGS), $(FLAGS_TO_PASS) with $(EXTRA_HOST_FLAGS).
* Makefile.in: Regenerate.
2008-02-20 Paolo Bonzini <bonzini@gnu.org>
PR bootstrap/32009
* mh-ppc-darwin (BOOT_CFLAGS): Reenable.
2008-02-20 Paolo Bonzini <bonzini@gnu.org>
* doc/install.texi: Correct references to CFLAGS, replacing them
with BOOT_CFLAGS. Document flags used during bootstrap for
target libraries.
From-SVN: r132479
2008-02-20 15:10:40 +01:00
fi
AC_SUBST(CXXFLAGS_FOR_TARGET)
2011-05-09 09:39:45 +02:00
AC_SUBST(LDFLAGS_FOR_TARGET)
2004-03-11 06:01:17 +01:00
# Handle --with-headers=XXX. If the value is not "yes", the contents of
# the named directory are copied to $(tooldir)/sys-include.
if test x"${with_headers}" != x && test x"${with_headers}" != xno ; then
if test x${is_cross_compiler} = xno ; then
echo 1>&2 '***' --with-headers is only supported when cross compiling
exit 1
fi
if test x"${with_headers}" != xyes ; then
2007-02-13 14:39:19 +01:00
x=${gcc_cv_tool_prefix}
2007-02-09 16:14:37 +01:00
copy_dirs="${copy_dirs} ${with_headers} $x/${target_noncanonical}/sys-include"
2004-03-11 06:01:17 +01:00
fi
fi
# Handle --with-libs=XXX. If the value is not "yes", the contents of
# the name directories are copied to $(tooldir)/lib. Multiple directories
# are permitted.
if test x"${with_libs}" != x && test x"${with_libs}" != xno ; then
if test x${is_cross_compiler} = xno ; then
echo 1>&2 '***' --with-libs is only supported when cross compiling
exit 1
fi
if test x"${with_libs}" != xyes ; then
# Copy the libraries in reverse order, so that files in the first named
# library override files in subsequent libraries.
2007-02-13 14:39:19 +01:00
x=${gcc_cv_tool_prefix}
2004-03-11 06:01:17 +01:00
for l in ${with_libs}; do
2007-02-09 16:14:37 +01:00
copy_dirs="$l $x/${target_noncanonical}/lib ${copy_dirs}"
2004-03-11 06:01:17 +01:00
done
fi
fi
2009-10-03 23:10:11 +02:00
# Set with_gnu_as, with_gnu_ld, and with_system_zlib as appropriate.
2006-01-26 19:52:49 +01:00
#
# This is done by determining whether or not the appropriate directory
# is available, and by checking whether or not specific configurations
# have requested that this magic not happen.
#
# The command line options always override the explicit settings in
2015-07-24 20:20:44 +02:00
# configure.ac, and the settings in configure.ac override this magic.
2006-01-26 19:52:49 +01:00
#
# If the default for a toolchain is to use GNU as and ld, and you don't
# want to do that, then you should use the --without-gnu-as and
2009-10-03 23:10:11 +02:00
# --without-gnu-ld options for the configure script. Similarly, if
# the default is to use the included zlib and you don't want to do that,
# you should use the --with-system-zlib option for the configure script.
2006-01-26 19:52:49 +01:00
if test x${use_gnu_as} = x &&
echo " ${configdirs} " | grep " gas " > /dev/null 2>&1 ; then
with_gnu_as=yes
extra_host_args="$extra_host_args --with-gnu-as"
fi
if test x${use_gnu_ld} = x &&
2008-03-21 16:40:16 +01:00
echo " ${configdirs} " | egrep " (go)?ld " > /dev/null 2>&1 ; then
2006-01-26 19:52:49 +01:00
with_gnu_ld=yes
extra_host_args="$extra_host_args --with-gnu-ld"
fi
2009-10-03 23:10:11 +02:00
if test x${use_included_zlib} = x &&
echo " ${configdirs} " | grep " zlib " > /dev/null 2>&1 ; then
:
else
with_system_zlib=yes
extra_host_args="$extra_host_args --with-system-zlib"
fi
2006-01-26 19:52:49 +01:00
# If using newlib, add --with-newlib to the extra_host_args so that gcc/configure
# can detect this case.
if test x${with_newlib} != xno && echo " ${target_configdirs} " | grep " target-newlib " > /dev/null 2>&1 ; then
with_newlib=yes
extra_host_args="$extra_host_args --with-newlib"
fi
2004-03-11 06:01:17 +01:00
# Handle ${copy_dirs}
set fnord ${copy_dirs}
shift
while test $# != 0 ; do
if test -f $2/COPIED && test x"`cat $2/COPIED`" = x"$1" ; then
:
else
echo Copying $1 to $2
# Use the install script to create the directory and all required
# parent directories.
if test -d $2 ; then
:
else
echo >config.temp
${srcdir}/install-sh -c -m 644 config.temp $2/COPIED
fi
# Copy the directory, assuming we have tar.
# FIXME: Should we use B in the second tar? Not all systems support it.
(cd $1; tar -cf - .) | (cd $2; tar -xpf -)
# It is the responsibility of the user to correctly adjust all
# symlinks. If somebody can figure out how to handle them correctly
# here, feel free to add the code.
echo $1 > $2/COPIED
fi
shift; shift
done
2006-01-26 19:52:49 +01:00
# Determine a target-dependent exec_prefix that the installed
# gcc will search in. Keep this list sorted by triplet, with
# the *-*-osname triplets last.
md_exec_prefix=
case "${target}" in
2007-07-03 09:06:26 +02:00
i[[34567]]86-pc-msdosdjgpp*)
2006-01-26 19:52:49 +01:00
md_exec_prefix=/dev/env/DJDIR/bin
;;
*-*-hpux* | \
*-*-nto-qnx* | \
configure.ac (*-*-sysv4*): Don't enable libgomp.
* configure.ac (*-*-sysv4*): Don't enable libgomp.
(alpha*-*-*vms*, i[[34567]]86-*-sco3.2v5*, mn10300-*-*,
powerpc-*-chorusos*, powerpc*-*-eabi*, powerpc*-*-sysv*,
powerpc*-*-kaos*, s390x-ibm-tpf*, sparc64-*-elf*, v850*-*-*,
xtensa*-*-elf*, *-*-beos*, *-*-elf*, *-*-netware*, *-*-rtems*,
*-*-sysv[[45]]*, *-*-vxworks*, *-wrs-windiss): Remove
md_exec_prefix cases.
* configure: Regenerate.
From-SVN: r171829
2011-04-01 15:40:46 +02:00
*-*-solaris2*)
2006-01-26 19:52:49 +01:00
md_exec_prefix=/usr/ccs/bin
;;
esac
2002-12-16 19:23:00 +01:00
extra_arflags_for_target=
extra_nmflags_for_target=
2002-12-22 07:46:41 +01:00
extra_ranlibflags_for_target=
configure.in: Convert to autoconf script.
(toplev)
* configure.in: Convert to autoconf script. Blow away lots
of now-redundant Makefile fragments.
* configure: Generate using Autoconf.
* Makefile.tpl: Rewrite to reflect autoconfiscation.
* Makefile.in: Regenerate.
(config)
* acx.m4: New.
* mh-a68bsd, mh-aix386, mh-apollo68, mh-delta88, mh-hp300,
mh-hpux, mh-hpux8, mh-irix5, mh-irix6, mh-ncrsvr43, mh-openedition,
mh-riscos, mh-sysv: Delete.
* mh-cxux, mh-dgux386, mh-interix, mh-lynxrs6k, mh-ncr3000,
mh-necv4, mh-sco, mh-solaris, mh-sysv4, mh-sysv5, mt-v810: Simplify.
From-SVN: r60558
2002-12-28 07:57:50 +01:00
target_makefile_frag=/dev/null
2002-07-01 23:01:48 +02:00
case "${target}" in
2006-12-11 07:43:16 +01:00
spu-*-*)
target_makefile_frag="config/mt-spu"
;;
2014-11-26 22:53:04 +01:00
mips*-sde-elf* | mips*-mti-elf* | mips*-img-elf*)
2007-08-17 15:12:22 +02:00
target_makefile_frag="config/mt-sde"
;;
2007-09-20 22:01:34 +02:00
mipsisa*-*-elfoabi*)
target_makefile_frag="config/mt-mips-elfoabi"
;;
configure.ac (mips*-*-*linux*, [...]): Use mt-mips-gnu.
* configure.ac (mips*-*-*linux*, mips*-*-gnu*): Use mt-mips-gnu.
* configure: Regenerate.
config/
* mt-mips16-compat: New file, taken from mt-mips-elfoabi.
* mt-mips-elfoabi: Include mt-mips16-compat.
* mt-mips-gnu: New file.
gcc/
* config.gcc (mips*-*-linux*, mips64*-*-linux*): Add
mips/t-libgcc-mips16 to tmake_file.
* config/mips/mips-protos.h (mips_call_type): New enum.
(mips_pic_base_register, mips_got_load): Declare.
(mips_restore_gp): Take an rtx argument.
(mips_use_pic_fn_addr_reg_p): Declare.
(mips_expand_call): Replace the sibcall_p argument with
a mips_call_type argument. Add a lazy_p parameter.
(mips_split_call): Declare.
* config/mips/mips.h (MIPS16_PIC_TEMP_REGNUM): New macro.
(MIPS16_PIC_TEMP): Likewise.
(reg_class): Delete M16_NA_REGS.
(REG_CLASS_NAMES, REG_CLASS_CONTENTS): Update accordingly.
(SYMBOL_FLAG_BIND_NOW, SYMBOL_REF_BIND_NOW_P): New macros.
(mips_split_hi_p): Declare.
* config/mips/mips.c (mips_split_hi_p): New array.
(mips_regno_to_class): Change M16_NA_REGS entries to M16_REGS.
(mips_got_symbol_type_p): New function.
(mips_global_symbol_p): Check SYMBOL_REF_EXTERNAL_P.
(mips16_stub_function_p): New function.
(mips16_local_function_p): Likewise.
(mips_use_pic_fn_addr_reg_p): Likewise.
(mips_cannot_force_const_mem): Return false for HIGHs.
Extend CONST_INT and symbolic handling to MIPS16, using
mips_symbol_insns to check that the base symbol type is a
legitimate constant. Reject GOT-based constants if
TARGET_MIPS16_PCREL_LOADS.
(mips_const_insns): Check targetm.cannot_force_const_mem when
decomposing a symbolic base and a large offset.
(mips_emit_call_insn): Add ORIG_ADDR and ADDR parameters.
When calling a function that needs $25 from MIPS16 code,
move the target address into $25 separately and add a USE
to the call insn.
(mips16_gp_pseudo_reg): Insert the initializer immediately
before the first real insn.
(mips_pic_base_register, mips_got_load): New functions.
(mips_split_symbol): Generalize the name of the LO_SUM_OUT
parameter to LOW_OUT. Say that it can be any valid SET_SRC
when splitting a load-address operation. Split SYMBOL_GOT_DISP
constants and highs of SYMBOL_GOT_PAGE_OFST constants.
(mips_call_tls_get_addr): Update the call to mips_expand_call,
also passing NULL_RTX rather than const0_rtx as the aux argument.
(mips_rewrite_small_data_p): Check mips_lo_relocs and mips_split_p
instead of TARGET_EXPLICIT_RELOCS.
(mips_ok_for_lazy_binding_p): Check SYMBOL_REF_BIND_NOW_P.
(mips_load_call_address): Replace the sibcall_p argument with
a mips_call_type argument. Use mips_got_load.
(mips16_local_alias): New structure.
(mips16_local_aliases): New variable.
(mips16_local_aliases_hash): New function.
(mips16_local_aliases_eq): Likewise.
(mips16_local_alias): Likewise.
(mips16_stub_function): Likewise.
(mips16_build_function_stub): Create a local alias for the target
function. Handle TARGET_ABICALLS. For PIC abicalls, emit a
.cpload directive and an R_MIPS_NONE relocation for the target
function, then load the alias rather than the function itself.
Wrap the non-PIC abicalls version in ".option pic0/.option pic2".
(mips16_copy_fpr_return_value): Use mips16_stub_function and
mips_expand_call. Set SYMBOL_REF_BIND_NOW on the symbol.
(mips16_build_call_stub): Replace the FN parameter with an
FN_PTR parameter. Force the address into a register if it
isn't a call_insn_operand; don't rely on the caller to do this.
If a call to a locally-defined and locally-binding MIPS16
function must be made indirectly, redirect the call to the
function's local alias. Use mips16_stub_function_p,
mips16_stub_function, mips_expand_call and use_reg.
Set SYMBOL_FLAG_BIND_NOW on __mips_call_* symbols.
Use explicit %hi and %lo accesses where possible.
Use MIPS_CALL to generate the correct code form of a
jal instruction. Add clobbers of $18 instead of uses.
Update the call to mips_emit_call_insn.
(mips_expand_call): Replace the SIBCALL_P argument with a
mips_call_type argument and handle the new MIPS_CALL_EPILOGUE value.
Take a LAZY_P parameter. Call mips16_build_call_stub first,
allowing it to modify the call address. Update the calls to
mips_load_call_address and mips_emit_call_insn.
(mips_split_call): New function.
(mips_init_relocs): Clear mips_split_hi_p. Only use %gp_rel if
!TARGET_MIPS16. Split SYMBOL_GOT_DISP, and the high parts of
SYMBOL_GOT_PAGE_OFST, for MIPS16 code.
(mips_global_pointer): Check mips16_cfun_returns_in_fpr_p.
(mips_extra_live_on_entry): Include MIPS16_PIC_TEMP_REGNUM
if TARGET_MIPS16.
(mips_cprestore_slot): New function.
(mips_restore_gp): Take a TEMP parameter. Handle TARGET_MIPS16
and use mips_cprestore_slot.
(mips_output_function_prologue): Handle TARGET_MIPS16 for
LOADGP_OLDABI.
(mips_emit_loadgp): Move into MIPS16_PIC_TEMP for MIPS16,
then use a copygp_mips16 instruction to set up $28.
(mips_expand_prologue): Initialize the cprestore slot for MIPS16 too.
(mips16_lay_out_constants): Call split_all_insns_noflow.
(mips_reorg_process_insns): Explicitly set all_noreorder_p to
false if TARGET_MIPS16.
(mips_reorg): Don't call vr4130_align_insns if TARGET_MIPS16.
(mips_output_mi_thunk): Use mips_got_symbol_type_p. Use the
mips_dangerous_for_la25_p approach for MIPS16 PIC calls too.
(mips_set_mips16_mode): Always set MASK_EXPLICIT_RELOCS for
MIPS16 code. Allow MIPS16 o32 PIC.
(mips_override_options): Allow MIPS16 o32 PIC.
* config/mips/mips.md: Lower CONST_GP_P moves into register moves
after reload if TARGET_USE_GOT.
(UNSPEC_COPYGP): New constant.
(length): Use a default length of 8 for MIPS16 GOT loads.
(*got_disp<mode>): Check mips_split_p instead of TARGET_XGOT.
(*got_page<mode>): Check mips_split_hi_p.
(*got_disp<mode>, *got_page<mode>): Use mips_got_load.
(unspec_got<mode>, unspec_call<mode>): New expanders.
(load_got<mode>, load_call<mode>): Remove the length attributes.
Use a got attribute instead of a type attribute.
(copygp_mips16): New insn.
(restore_gp): Add a scratch clobber and pass it to mips_restore_gp.
(load_call<mode>): Use a "d" constraint instead of an "r" constraint.
(sibcall, sibcall_value, call, call_value): Update the calls
to mips_expand_call.
(call_internal, call_value_internal): Use mips_split_call.
(call_value_multiple_internal): Likewise.
(call_split): Move after call_internal (the insn it is split from).
(call_internal_direct, call_value_internal_direct): Turn into
define_insn_and_splits. Split if TARGET_SPLIT_CALLS.
(call_direct_split, call_value_direct_split): New patterns.
* config/mips/constraints.md (c): Handle TARGET_MIPS16 first
and use M16_REGS instead of M16_NA_REGS.
* config/mips/predicates.md (const_call_insn_operand): Replace
the TARGET_ABSOLUTE_ABICALLS-based check with a more general
mips_use_pic_fn_addr_reg_p check.
(move_operand): Reject HIGHs if mips_split_hi_p.
* config/mips/mips16.S: Assembly as empty if the ABI is not suitable.
(__mips16_floatunsisf): Inline __mips16_floatsisf.
(CALL_STUB_NO_RET, CALL_STUB_REG): Copy the target register to $25.
* config/mips/libgcc-mips16.ver: New file.
* config/mips/t-libgcc-mips16 (SHLIB_MAPFILES): Add
$(srcdir)/config/mips/libgcc-mips16.ver.
gcc/testsuite/
* lib/target-supports.exp (check_profiling_available): Return false
for -p and -pg on MIPS16 targets.
From-SVN: r138912
2008-08-09 21:08:15 +02:00
mips*-*-*linux* | mips*-*-gnu*)
target_makefile_frag="config/mt-mips-gnu"
;;
2014-05-15 01:20:59 +02:00
nios2-*-elf*)
target_makefile_frag="config/mt-nios2-elf"
;;
2009-01-29 19:48:41 +01:00
*-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu | *-*-kopensolaris*-gnu)
2004-08-03 22:48:48 +02:00
target_makefile_frag="config/mt-gnu"
2002-07-01 23:01:48 +02:00
;;
configure.in: Convert to autoconf script.
(toplev)
* configure.in: Convert to autoconf script. Blow away lots
of now-redundant Makefile fragments.
* configure: Generate using Autoconf.
* Makefile.tpl: Rewrite to reflect autoconfiscation.
* Makefile.in: Regenerate.
(config)
* acx.m4: New.
* mh-a68bsd, mh-aix386, mh-apollo68, mh-delta88, mh-hp300,
mh-hpux, mh-hpux8, mh-irix5, mh-irix6, mh-ncrsvr43, mh-openedition,
mh-riscos, mh-sysv: Delete.
* mh-cxux, mh-dgux386, mh-interix, mh-lynxrs6k, mh-ncr3000,
mh-necv4, mh-sco, mh-solaris, mh-sysv4, mh-sysv5, mt-v810: Simplify.
From-SVN: r60558
2002-12-28 07:57:50 +01:00
*-*-aix4.[[3456789]]* | *-*-aix[[56789]].*)
2002-12-16 19:23:00 +01:00
# nm and ar from AIX 4.3 and above require -X32_64 flag to all ar and nm
# commands to handle both 32-bit and 64-bit objects. These flags are
# harmless if we're using GNU nm or ar.
extra_arflags_for_target=" -X32_64"
extra_nmflags_for_target=" -B -X32_64"
2002-07-01 23:01:48 +02:00
;;
2002-07-03 04:49:38 +02:00
esac
configure.in: Convert to autoconf script.
(toplev)
* configure.in: Convert to autoconf script. Blow away lots
of now-redundant Makefile fragments.
* configure: Generate using Autoconf.
* Makefile.tpl: Rewrite to reflect autoconfiscation.
* Makefile.in: Regenerate.
(config)
* acx.m4: New.
* mh-a68bsd, mh-aix386, mh-apollo68, mh-delta88, mh-hp300,
mh-hpux, mh-hpux8, mh-irix5, mh-irix6, mh-ncrsvr43, mh-openedition,
mh-riscos, mh-sysv: Delete.
* mh-cxux, mh-dgux386, mh-interix, mh-lynxrs6k, mh-ncr3000,
mh-necv4, mh-sco, mh-solaris, mh-sysv4, mh-sysv5, mt-v810: Simplify.
From-SVN: r60558
2002-12-28 07:57:50 +01:00
alphaieee_frag=/dev/null
2002-07-03 04:49:38 +02:00
case $target in
alpha*-*-*)
# This just makes sure to use the -mieee option to build target libs.
# This should probably be set individually by each library.
alphaieee_frag="config/mt-alphaieee"
2002-07-01 23:01:48 +02:00
;;
esac
2002-04-17 22:23:44 +02:00
2002-07-01 23:01:48 +02:00
# If --enable-target-optspace always use -Os instead of -O2 to build
# the target libraries, similarly if it is not specified, use -Os
# on selected platforms.
configure.in: Convert to autoconf script.
(toplev)
* configure.in: Convert to autoconf script. Blow away lots
of now-redundant Makefile fragments.
* configure: Generate using Autoconf.
* Makefile.tpl: Rewrite to reflect autoconfiscation.
* Makefile.in: Regenerate.
(config)
* acx.m4: New.
* mh-a68bsd, mh-aix386, mh-apollo68, mh-delta88, mh-hp300,
mh-hpux, mh-hpux8, mh-irix5, mh-irix6, mh-ncrsvr43, mh-openedition,
mh-riscos, mh-sysv: Delete.
* mh-cxux, mh-dgux386, mh-interix, mh-lynxrs6k, mh-ncr3000,
mh-necv4, mh-sco, mh-solaris, mh-sysv4, mh-sysv5, mt-v810: Simplify.
From-SVN: r60558
2002-12-28 07:57:50 +01:00
ospace_frag=/dev/null
2002-07-01 23:01:48 +02:00
case "${enable_target_optspace}:${target}" in
yes:*)
2002-07-03 04:49:38 +02:00
ospace_frag="config/mt-ospace"
2002-07-01 23:01:48 +02:00
;;
:d30v-*)
2002-07-03 04:49:38 +02:00
ospace_frag="config/mt-d30v"
2002-07-01 23:01:48 +02:00
;;
2015-06-30 18:40:19 +02:00
:m32r-* | :d10v-* | :fr30-* | :i?86*-*-elfiamcu)
2002-07-03 04:49:38 +02:00
ospace_frag="config/mt-ospace"
2002-07-01 23:01:48 +02:00
;;
no:* | :*)
;;
*)
echo "*** bad value \"${enable_target_optspace}\" for --enable-target-optspace flag; ignored" 1>&2
;;
esac
1997-08-22 00:57:35 +02:00
configure.in: Convert to autoconf script.
(toplev)
* configure.in: Convert to autoconf script. Blow away lots
of now-redundant Makefile fragments.
* configure: Generate using Autoconf.
* Makefile.tpl: Rewrite to reflect autoconfiscation.
* Makefile.in: Regenerate.
(config)
* acx.m4: New.
* mh-a68bsd, mh-aix386, mh-apollo68, mh-delta88, mh-hp300,
mh-hpux, mh-hpux8, mh-irix5, mh-irix6, mh-ncrsvr43, mh-openedition,
mh-riscos, mh-sysv: Delete.
* mh-cxux, mh-dgux386, mh-interix, mh-lynxrs6k, mh-ncr3000,
mh-necv4, mh-sco, mh-solaris, mh-sysv4, mh-sysv5, mt-v810: Simplify.
From-SVN: r60558
2002-12-28 07:57:50 +01:00
# Some systems (e.g., one of the i386-aix systems the gas testers are
# using) don't handle "\$" correctly, so don't use it here.
2007-02-09 16:14:37 +01:00
tooldir='${exec_prefix}'/${target_noncanonical}
configure.in: Convert to autoconf script.
(toplev)
* configure.in: Convert to autoconf script. Blow away lots
of now-redundant Makefile fragments.
* configure: Generate using Autoconf.
* Makefile.tpl: Rewrite to reflect autoconfiscation.
* Makefile.in: Regenerate.
(config)
* acx.m4: New.
* mh-a68bsd, mh-aix386, mh-apollo68, mh-delta88, mh-hp300,
mh-hpux, mh-hpux8, mh-irix5, mh-irix6, mh-ncrsvr43, mh-openedition,
mh-riscos, mh-sysv: Delete.
* mh-cxux, mh-dgux386, mh-interix, mh-lynxrs6k, mh-ncr3000,
mh-necv4, mh-sco, mh-solaris, mh-sysv4, mh-sysv5, mt-v810: Simplify.
From-SVN: r60558
2002-12-28 07:57:50 +01:00
build_tooldir=${tooldir}
# Create a .gdbinit file which runs the one in srcdir
# and tells GDB to look there for source files.
if test -r ${srcdir}/.gdbinit ; then
case ${srcdir} in
.) ;;
*) cat > ./.gdbinit <<EOF
# ${NO_EDIT}
dir ${srcdir}
dir .
source ${srcdir}/.gdbinit
EOF
;;
esac
fi
1997-08-22 00:57:35 +02:00
# Make sure that the compiler is able to generate an executable. If it
# can't, we are probably in trouble. We don't care whether we can run the
# executable--we might be using a cross compiler--we only care whether it
# can be created. At this point the main configure script has set CC.
2002-04-30 05:16:53 +02:00
we_are_ok=no
1997-08-22 00:57:35 +02:00
echo "int main () { return 0; }" > conftest.c
${CC} -o conftest ${CFLAGS} ${CPPFLAGS} ${LDFLAGS} conftest.c
2002-04-30 05:16:53 +02:00
if test $? = 0 ; then
if test -s conftest || test -s conftest.exe ; then
we_are_ok=yes
fi
fi
case $we_are_ok in
no)
echo 1>&2 "*** The command '${CC} -o conftest ${CFLAGS} ${CPPFLAGS} ${LDFLAGS} conftest.c' failed."
echo 1>&2 "*** You must set the environment variable CC to a working compiler."
rm -f conftest*
exit 1
;;
esac
1997-08-22 00:57:35 +02:00
rm -f conftest*
2008-08-31 20:14:25 +02:00
# Decide which environment variable is used to find dynamic libraries.
2002-10-03 20:50:19 +02:00
case "${host}" in
*-*-hpux*) RPATH_ENVVAR=SHLIB_PATH ;;
* configure.ac (i[[3456789]]86-*-vsta, i[[3456789]]86-*-go32*,
i[[3456789]]86-*-beos*, powerpc-*-beos*, m68k-hp-hpux*,
m68k-apollo-sysv*, m68k-apollo-bsd*, m88k-dg-dgux*,
m88k-harris-cxux*, m88k-motorola-sysv*, mips*-dec-ultrix*,
mips*-nec-sysv4*, mips*-sgi-irix4*, mips*-*-sysv4*, mips*-*-sysv*,
i370-ibm-opened*, i[[3456789]]86-*-sysv5*, i[[3456789]]86-*-dgux*,
i[[3456789]]86-ncr-sysv4.3*, i[[3456789]]86-ncr-sysv4*,
i[[3456789]]86-*-sco3.2v5*, i[[3456789]]86-*-sco*,
i[[3456789]]86-*-udk*, vax-*-ultrix2*, m68k-sun-sunos*,
hppa*-*-hiux*, *-*-hiux*, rs6000-*-lynxos*, *-*-sysv4*,
*-*-rhapsody*): Remove host cases.
* configure: Regenerate.
config:
* mh-cxux, mh-decstation, mh-dgux386, mh-lynxrs6k, mh-ncr3000,
mh-necv4, mh-sco, mh-sysv5: Remove.
From-SVN: r171412
2011-03-24 17:49:56 +01:00
*-*-darwin*) RPATH_ENVVAR=DYLD_LIBRARY_PATH ;;
2008-08-31 20:14:25 +02:00
*-*-mingw* | *-*-cygwin ) RPATH_ENVVAR=PATH ;;
2002-10-03 20:50:19 +02:00
*) RPATH_ENVVAR=LD_LIBRARY_PATH ;;
esac
2008-08-31 20:14:25 +02:00
# On systems where the dynamic library environment variable is PATH,
# gcc/ will put dynamic libraries into a subdirectory to avoid adding
# built executables to PATH.
if test "$RPATH_ENVVAR" = PATH; then
GCC_SHLIB_SUBDIR=/shlib
else
GCC_SHLIB_SUBDIR=
fi
2014-03-21 08:16:06 +01:00
# Adjust the toplevel makefile according to whether bootstrap was selected.
case $enable_bootstrap in
yes)
bootstrap_suffix=bootstrap
BUILD_CONFIG=bootstrap-debug
;;
no)
bootstrap_suffix=no-bootstrap
BUILD_CONFIG=
;;
esac
AC_MSG_CHECKING(for default BUILD_CONFIG)
AC_ARG_WITH([build-config],
[AS_HELP_STRING([--with-build-config='NAME NAME2...'],
[use config/NAME.mk build configuration])],
[case $with_build_config in
yes) with_build_config= ;;
no) with_build_config= BUILD_CONFIG= ;;
esac])
if test "x${with_build_config}" != x; then
BUILD_CONFIG=$with_build_config
else
case $BUILD_CONFIG in
bootstrap-debug)
if echo "int f (void) { return 0; }" > conftest.c &&
${CC} -c conftest.c &&
mv conftest.o conftest.o.g0 &&
${CC} -c -g conftest.c &&
mv conftest.o conftest.o.g &&
${srcdir}/contrib/compare-debug conftest.o.g0 conftest.o.g > /dev/null 2>&1; then
:
else
BUILD_CONFIG=
fi
rm -f conftest.c conftest.o conftest.o.g0 conftest.o.g
;;
esac
fi
AC_MSG_RESULT($BUILD_CONFIG)
AC_SUBST(BUILD_CONFIG)
# Use same top-level configure hooks in libgcc/libstdc++/libvtv.
AC_MSG_CHECKING([for --enable-vtable-verify])
AC_ARG_ENABLE(vtable-verify,
2015-05-28 16:27:35 +02:00
[AS_HELP_STRING([--enable-vtable-verify],
[Enable vtable verification feature])],
2014-03-21 08:16:06 +01:00
[case "$enableval" in
yes) enable_vtable_verify=yes ;;
no) enable_vtable_verify=no ;;
*) enable_vtable_verify=no;;
esac],
[enable_vtable_verify=no])
AC_MSG_RESULT($enable_vtable_verify)
2002-12-16 19:23:00 +01:00
# Record target_configdirs and the configure arguments for target and
# build configuration in Makefile.
target_configdirs=`echo "${target_configdirs}" | sed -e 's/target-//g'`
Makefile.def (build_modules): Add bison, byacc, flex, m4, texinfo.
2004-07-01 Paolo Bonzini <bonzini@gnu.org>
* Makefile.def (build_modules): Add bison, byacc, flex,
m4, texinfo.
(flags_to_pass): Add FLEX.
* Makefile.tpl (BUILD_DIR_PREFIX, BASE_EXPORTS): New.
(BUILD_EXPORTS, HOST_EXPORTS, BASE_TARGET_EXPORTS): Include it.
(DEFAULT_YACC, USUAL_YACC, DEFAULT_LEX, USUAL_LEX, DEFAULT_M4,
DEFAULT_MAKEINFO): Remove.
(CONFIGURED_YACC, CONFIGURED_FLEX, CONFIGURED_BISON,
CONFIGURED_LEX, CONFIGURED_M4, CONFIGURED_MAKEINFO): Substitute.
(YACC, FLEX, BISON, LEX, M4, MAKEINFO): Define to look into
objdir or else use configured tool.
(all-build): New.
(all): Depend on it.
(Build module dependencies): Add.
* Makefile.in: Regenerate.
* configure.in: Better support for multiple build modules,
matching what is done for host/target modules. Do not look
for "plausible" locations of build tools if Canadian cross.
Use autoconf's AC_PROG_CC to find a C compiler. Define
BUILD_DIR_PREFIX. Look for flex, makeinfo and m4.
* configure: Regenerate.
From-SVN: r84017
2004-07-02 09:55:37 +02:00
build_configdirs=`echo "${build_configdirs}" | sed -e 's/build-//g'`
2014-03-26 10:19:44 +01:00
bootstrap_fixincludes=no
2002-12-16 19:23:00 +01:00
2010-01-25 19:01:29 +01:00
# If we are building libgomp, bootstrap it.
if echo " ${target_configdirs} " | grep " libgomp " > /dev/null 2>&1 ; then
bootstrap_target_libs=${bootstrap_target_libs}target-libgomp,
fi
2014-03-21 08:16:06 +01:00
# If we are building libsanitizer and $BUILD_CONFIG contains bootstrap-asan
# or bootstrap-ubsan, bootstrap it.
if echo " ${target_configdirs} " | grep " libsanitizer " > /dev/null 2>&1; then
case "$BUILD_CONFIG" in
*bootstrap-asan* | *bootstrap-ubsan* )
bootstrap_target_libs=${bootstrap_target_libs}target-libsanitizer,
2014-03-26 10:19:44 +01:00
bootstrap_fixincludes=yes
2014-03-21 08:16:06 +01:00
;;
esac
2012-12-11 22:35:40 +01:00
fi
2014-03-21 08:16:06 +01:00
# If we are building libvtv and --enable-vtable-verify, bootstrap it.
if echo " ${target_configdirs} " | grep " libvtv " > /dev/null 2>&1 &&
test "$enable_vtable_verify" != no; then
Commit the vtable verification feature.
Commit the vtable verification feature. This feature is designed to
detect, at run time, if/when the vtable pointer in a C++ object has
been corrupted, before allowing virtual calls through that pointer.
If pointer corruption is detected, execution of the program is halted.
libstdc++-v3 ChangeLog:
2013-08-06 Caroline Tice <cmtice@google.com>
* fragment.am: Add XTEMPLATE_FLAGS.
* configure.ac: Add definitions for --enable-vtable-verify.
* acinclude.m4: Add --enable-vtable-verify and
--disable-vtable-verify; define --enable-vtable-verify; define
VTV_CXXFLAGS, VTV_PCH_CXXFLAGS and VTV_CXXLINKFLAGS.
* config/abi/pre/gnu.ver: Export symbols for vtable verification.
* libsupc++/Makefile.am: Define vtv_sources and add it to
libsupc___la_SOURCES and libsupc__convenience_la_SOURCES.
* libsupc++/vtv_stubs.cc: New file.
* include/Makefile.am: Add VTV_PCH_CXXFLAGS to PCHFLAGS.
* src/Makefile.am: Add VTV_CXXFLAGS to AM_CXXFLAGS; add
VTV_CXXLINKFLAGS to CXXLINK.
* src/c++98/Makefile.am: Comment out XTEMPLATE_FLAGS; add VTV_CXXFLAGS
to AM_CXXFLAGS; add VTV_CXXXLINKFLAGS to CXXLINK.
* src/C++11/Makefile.am: Ditto.
* doc/xml/manual/configure.xml: Add entry for --enable-vtable-verify.
* scripts/testsuite_flags.in: Add cxxvtvflags to Usage; cause
cxxvtvflags to use VTV_CXXFLAGS and VTV_CXXLINKFLAGS.
* testsuite/lib/libstdc++.exp: Add cxxvtvflags; add code to locate
libvtv if --enable-vtable-verify was used; set cxxvtvflags; add
cxxvtvflags to cxx_final.
* testsuite/18_support/bad_exception/23591_thread-1.c: Add
-fvtable-verify=none to compiler flags.
* testsuite/17_intro/freestanding.cc: Add -fvtable-verify=none
to compiler flags.
* configure: Regenerated.
* Makefile.in: Regenerated.
* python/Makefile.in: Regenerated.
* include/Makefile.in: Regenerated.
* libsupc++/Makefile.in: Regenerated.
* config.h.in: Regenerated.
* po/Makefile.in: Regenerated.
* src/Makefile.in: Regenerated.
* src/c++98/Makefile.in: Regenerated.
* src/c++11/Makefile.in: Regenerated.
* doc/Makefile.in: Regenerated.
* testsuite/Makefile.in: Regenerated.
top level ChangeLog:
2013-08-06 Caroline Tice <cmtice@google.com>
* configure.ac: Add target-libvtv to target_libraries; disable libvtv
on non-linux systems; add target-libvtv to noconfigdirs; add
libsupc++/.libs to C++ library search paths.
* configure: Regenerated.
* Makefile.def: Add libvtv to target_modules; make libvtv depend on
libstdc++ and libgcc.
* Makefile.in: Regenerated.
include/ChangeLog:
2013-08-06 Caroline Tice <cmtice@google.com>
* vtv-change-permission.h: New file.
contrib/ChangeLog:
2013-08-06 Caroline Tice4 <cmtice@google.com>
* gcc_update: Add libvtv files.
libgcc/ChangeLog:
2013-08-06 Caroline Tice <cmtice@google.com>
config.host (extra_parts): Add vtv_start.o, vtv_end.o
vtv_start_preinit.o and vtv_end_preinit.o.
configure.ac: Add code to check/set enable_vtable_verify.
Makefile.in: Add rules to build vtv_*.o, if enable_vtable_verify is
true.
vtv_start_preinit.c: New file.
vtv_end_preinit.c: New file.
vtv_start.c: New file.
vtv_end.c: New file.
configure: Regenerated.
gcc/ChangeLog:
2013-08-06 Caroline Tice <cmtice@google.com>
* gcc.c (VTABLE_VERIFICATION_SPEC): New definition.
(LINK_COMMAND_SPEC): Add VTABLE_VERIFICATION_SPEC.
* tree-pass.h: Add pass_vtable_verify.
* varasm.c (assemble_variable): Add code to properly set the comdat
section and name for the .vtable_map_vars section.
(assemble_vtyv_preinit_initializer): New function.
(default_sectin_type_flags): Make sure .vtable_map_vars section has
LINK_ONCE flag.
* output.h: Add function decl for assemble_vtv_preinit_initializer.
* vtable-verify.c: New file.
* vtable-verify.h: New file.
* flag-types.h (enum vtv_priority): Defintions for flag_vtable_verify
initialiation levels.
* timevar.def (TV_VTABLE_VERIFICATION): New definition.
* passes.def: Insert pass_vtable_verify.
* aclocal.m4: Reorder includes.
* doc/invoke.texi: Add documentation for the flags -fvtable-verify=,
-fvtv-debug and -fvtv-counts.
* config/gnu-user.h (GNU_USER_TARGET_STARTFILE_SPEC): Add vtv_start*.o,
as appropriate, if -fvtable-verify=... is used.
(GNU_USER_TARGET_ENDFILE_SPEC): Add vtv_end*.o as appropriate, if
-fvtable-verify=... is used.
* Makefile.in (OBJS): Add vtable-verify.o to list.
(vtable-verify.o): Add new build rule.
(GTFILES): Add vtable-verify.c to list.
* common.opt (fvtable-verify=): New flag.
(vtv_priority): Values for fvtable-verify= flag.
(fvtv-counts): New flag.
(fvtv-debug): New flag.
* tree.h (save_vtable_map_decl): New extern function decl.
gcc/cp/ChangeLog:
2013-08-06 Caroline Tice <cmtice@google.com>
* Make-lang.in (*CXX_AND_OBJCXX_OBJS): Add vtable-class-hierarchy.o to
list.
(vtable-class-hierarchy.o): Add build rule.
* cp-tree.h (vtv_start_verification_constructor_init_function): New
extern function decl.
(vtv_finish_verification_constructor_init_function): New extern
function decl.
(build_vtbl_address): New extern function decl.
(get_mangled_vtable_map_var_name): New extern function decl.
(vtv_compute_class_hierarchy_transitive_closure): New extern function
decl.
(vtv_generate_init_routine): New extern function decl.
(vtv_save_class_info): New extern function decl.
(vtv_recover_class_info): New extern function decl.
(vtv_build_vtable_verify_fndecl): New extern function decl.
* class.c (finish_struct_1): Add call to vtv_save_class_info if
flag_vtable_verify is true.
* config-lang.in: Add vtable-class-hierarchy.c to gtfiles list.
* vtable-class-hierarchy.c: New file.
* mangle.c (get_mangled_vtable_map_var_name): New function.
* decl2.c (start_objects): Update function comment.
(cp_write_global_declarations): Call vtv_recover_class_info,
vtv_compute_class_hierarchy_transitive_closure and
vtv_build_vtable_verify_fndecl, before calling
finalize_compilation_unit, and call vtv_generate_init_rount after, IFF
flag_vtable_verify is true.
(vtv_start_verification_constructor_init_function): New function.
(vtv_finish_verification_constructor_init_function): New function.
* init.c (build_vtbl_address): Remove static qualifier from function.
libvtv/ChangeLog:
2013-08-06 Caroline Tice <cmtice@google.com>
Initial check-in of new vtable verification feature.
* configure.ac : New file.
* acinclude.m4 : New file.
* Makefile.am : New file.
* aclocal.m4 : New file.
* configure.tgt : New file.
* configure: New file (generated).
* Makefile.in: New file (generated).
* vtv_set.h : New file.
* vtv_utils.cc : New file.
* vtv_utils.h : New file.
* vtv_malloc.cc : New file.
* vtv_rts.cc : New file.
* vtv_malloc.h : New file.
* vtv_rts.h : New file.
* vtv_fail.cc : New file.
* vtv_fail.h : New file.
* vtv_map.h : New file.
* scripts/run-testsuite.sh : New file.
* scripts/sum-vtv-counts.c : New file.
* testsuite/parts-test-main.h : New file.
* testusite/dataentry.cc : New file.
* testsuite/temp_deriv.cc : New file.
* testsuite/register_pair.cc : New file.
* testsuite/virtual_inheritance.cc : New file.
* testsuite/field-test.cc : New file.
* testsuite/nested_vcall_test.cc : New file.
* testsuite/template-list-iostream.cc : New file.
* testsuite/register_pair_inserts.cc : New file.
* testsuite/register_pair_inserts_mt.cc : New file.
* testsuite/event.list : New file.
* testsuite/parts-test-extra-parts-views.cc : New file.
* testsuite/parts-test-extra-parts-views.h : New file.
* testsuite/environment-fail-32.s : New file.
* testsuite/parts-test-extra-parts.h : New file.
* testsuite/temp_deriv2.cc : New file.
* testsuite/dlopen_mt.cc : New file.
* testsuite/event.h : New file.
* testsuite/template-list.cc : New file.
* testsuite/replace-fail.cc : New file.
* testsuite/Makefile.am : New file.
* testsuite/Makefile.in: New file (generated).
* testsuite/mempool_negative.c : New file.
* testsuite/parts-test-main.cc : New file.
* testsuite/event-private.cc : New file.
* testsuite/thunk.cc : New file.
* testsuite/event-defintiions.cc : New file.
* testsuite/event-private.h : New file.
* testsuite/parts-test.list : New file.
* testusite/register_pair_mt.cc : New file.
* testsuite/povray-derived.cc : New file.
* testsuite/event-main.cc : New file.
* testsuite/environment.cc : New file.
* testsuite/template-list2.cc : New file.
* testsuite/thunk_vtable_map_attack.cc : New file.
* testsuite/parts-test-extra-parts.cc : New file.
* testsuite/environment-fail-64.s : New file.
* testsuite/dlopen.cc : New file.
* testsuite/so.cc : New file.
* testsuite/temp_deriv3.cc : New file.
* testsuite/const_vtable.cc : New file.
* testsuite/mempool_positive.c : New file.
* testsuite/dup_name.cc : New file.
From-SVN: r201555
2013-08-07 05:38:59 +02:00
bootstrap_target_libs=${bootstrap_target_libs}target-libvtv,
fi
2016-12-21 12:28:40 +01:00
# If we are building libmpx and $BUILD_CONFIG contains bootstrap-mpx,
# bootstrap it.
2015-03-10 10:37:41 +01:00
if echo " ${target_configdirs} " | grep " libmpx " > /dev/null 2>&1; then
2016-12-21 12:28:40 +01:00
case "$BUILD_CONFIG" in
*bootstrap-mpx* )
bootstrap_target_libs=${bootstrap_target_libs}target-libmpx,
;;
esac
2015-03-10 10:37:41 +01:00
fi
2002-12-16 19:23:00 +01:00
# Determine whether gdb needs tk/tcl or not.
# Use 'maybe' since enable_gdbtk might be true even if tk isn't available
# and in that case we want gdb to be built without tk. Ugh!
# In fact I believe gdb is the *only* package directly dependent on tk,
# so we should be able to put the 'maybe's in unconditionally and
# leave out the maybe dependencies when enable_gdbtk is false. I'm not
# 100% sure that that's safe though.
2003-01-06 18:37:24 +01:00
2004-08-13 01:00:39 +02:00
gdb_tk="maybe-all-tcl maybe-all-tk maybe-all-itcl maybe-all-libgui"
2002-12-16 19:23:00 +01:00
case "$enable_gdbtk" in
no)
GDB_TK="" ;;
2003-01-06 18:37:24 +01:00
yes)
GDB_TK="${gdb_tk}" ;;
2002-12-16 19:23:00 +01:00
*)
2003-01-06 18:37:24 +01:00
# Only add the dependency on gdbtk when GDBtk is part of the gdb
# distro. Eventually someone will fix this and move Insight, nee
# gdbtk to a separate directory.
if test -d ${srcdir}/gdb/gdbtk ; then
GDB_TK="${gdb_tk}"
else
GDB_TK=""
fi
;;
2002-12-16 19:23:00 +01:00
esac
2005-11-11 22:47:07 +01:00
CONFIGURE_GDB_TK=`echo ${GDB_TK} | sed s/-all-/-configure-/g`
INSTALL_GDB_TK=`echo ${GDB_TK} | sed s/-all-/-install-/g`
2002-12-16 19:23:00 +01:00
2004-05-21 10:00:17 +02:00
# Strip out unwanted targets.
2003-05-18 17:43:44 +02:00
# While at that, we remove Makefiles if we were started for recursive
# configuration, so that the top-level Makefile reconfigures them,
# like we used to do when configure itself was recursive.
2009-09-08 19:55:03 +02:00
# Loop over modules. We used to use the "$extrasub" feature from Autoconf
# but now we're fixing up the Makefile ourselves with the additional
# commands passed to AC_CONFIG_FILES. Use separate variables
# extrasub-{build,host,target} not because there is any reason to split
# the substitutions up that way, but only to remain below the limit of
# 99 commands in a script, for HP-UX sed.
# Do not nest @if/@endif pairs, because configure will not warn you at all.
2003-05-18 17:43:44 +02:00
2009-09-21 22:32:37 +02:00
case "$enable_bootstrap:$ENABLE_GOLD: $configdirs :,$stage1_languages," in
yes:yes:*\ gold\ *:*,c++,*) ;;
yes:yes:*\ gold\ *:*)
AC_MSG_ERROR([in a combined tree, bootstrapping with --enable-gold requires c++ in stage1_languages])
;;
esac
2009-09-08 19:55:03 +02:00
extrasub_build=
Makefile.def (build_modules): Add bison, byacc, flex, m4, texinfo.
2004-07-01 Paolo Bonzini <bonzini@gnu.org>
* Makefile.def (build_modules): Add bison, byacc, flex,
m4, texinfo.
(flags_to_pass): Add FLEX.
* Makefile.tpl (BUILD_DIR_PREFIX, BASE_EXPORTS): New.
(BUILD_EXPORTS, HOST_EXPORTS, BASE_TARGET_EXPORTS): Include it.
(DEFAULT_YACC, USUAL_YACC, DEFAULT_LEX, USUAL_LEX, DEFAULT_M4,
DEFAULT_MAKEINFO): Remove.
(CONFIGURED_YACC, CONFIGURED_FLEX, CONFIGURED_BISON,
CONFIGURED_LEX, CONFIGURED_M4, CONFIGURED_MAKEINFO): Substitute.
(YACC, FLEX, BISON, LEX, M4, MAKEINFO): Define to look into
objdir or else use configured tool.
(all-build): New.
(all): Depend on it.
(Build module dependencies): Add.
* Makefile.in: Regenerate.
* configure.in: Better support for multiple build modules,
matching what is done for host/target modules. Do not look
for "plausible" locations of build tools if Canadian cross.
Use autoconf's AC_PROG_CC to find a C compiler. Define
BUILD_DIR_PREFIX. Look for flex, makeinfo and m4.
* configure: Regenerate.
From-SVN: r84017
2004-07-02 09:55:37 +02:00
for module in ${build_configdirs} ; do
2003-05-18 17:43:44 +02:00
if test -z "${no_recursion}" \
&& test -f ${build_subdir}/${module}/Makefile; then
echo 1>&2 "*** removing ${build_subdir}/${module}/Makefile to force reconfigure"
rm -f ${build_subdir}/${module}/Makefile
fi
2009-09-08 19:55:03 +02:00
extrasub_build="$extrasub_build
2004-05-21 10:00:17 +02:00
/^@if build-$module\$/d
2004-06-03 06:53:00 +02:00
/^@endif build-$module\$/d
/^@if build-$module-$bootstrap_suffix\$/d
/^@endif build-$module-$bootstrap_suffix\$/d"
2003-05-18 17:43:44 +02:00
done
2009-09-08 19:55:03 +02:00
extrasub_host=
2003-05-18 17:43:44 +02:00
for module in ${configdirs} ; do
2006-01-02 19:34:24 +01:00
if test -z "${no_recursion}"; then
2006-12-28 00:44:13 +01:00
for file in stage*-${module}/Makefile prev-${module}/Makefile ${module}/Makefile; do
2006-01-02 19:34:24 +01:00
if test -f ${file}; then
echo 1>&2 "*** removing ${file} to force reconfigure"
rm -f ${file}
fi
done
2003-05-18 17:43:44 +02:00
fi
2014-03-26 10:19:44 +01:00
case ${module},${bootstrap_fixincludes} in
fixincludes,no) host_bootstrap_suffix=no-bootstrap ;;
*) host_bootstrap_suffix=$bootstrap_suffix ;;
esac
2009-09-08 19:55:03 +02:00
extrasub_host="$extrasub_host
2004-05-21 10:00:17 +02:00
/^@if $module\$/d
2004-06-03 06:53:00 +02:00
/^@endif $module\$/d
2014-03-26 10:19:44 +01:00
/^@if $module-$host_bootstrap_suffix\$/d
/^@endif $module-$host_bootstrap_suffix\$/d"
2003-05-18 17:43:44 +02:00
done
2009-09-08 19:55:03 +02:00
extrasub_target=
2003-05-18 17:43:44 +02:00
for module in ${target_configdirs} ; do
if test -z "${no_recursion}" \
&& test -f ${target_subdir}/${module}/Makefile; then
echo 1>&2 "*** removing ${target_subdir}/${module}/Makefile to force reconfigure"
rm -f ${target_subdir}/${module}/Makefile
fi
configure.ac: Add --enable-build-with-cxx.
./: * configure.ac: Add --enable-build-with-cxx. When set, add c++ to
boot_languages. Only bootstrap target libraries listed in
target_libs for some boot language. Add --with-stage1-ldflags,
--with-stage1-libs, --with-boot-ldflags, --with-boot-libs. Remove
with_host_libstdcxx from ppllibs. Only add -fkeep-inline-functions
if not building with C++.
* Makefile.def: For target_module libstdc++-v3, set bootstrap=true.
* Makefile.tpl (STAGE1_LDFLAGS, STAGE1_LIBS): New variables.
(POSTSTAGE1_LDFLAGS, POSTSTAGE1_LIBS): New variables.
(HOST_EXPORTS): Add STAGE1_LDFLAGS to LDFLAGS. Export HOST_LIBS.
(POSTSTAGE1_HOST_EXPORTS): Set CXX and CXX_FOR_BUILD. Add
POSTSTAGE1_LDFLAGS to LDFLAGS. Export HOST_LIBS.
(POSTSTAGE1_FLAGS_TO_PASS): Likewise.
* configure, Makefile.in: Rebuild.
gcc/:
* configure.ac: Invoke AC_PROG_CXX. Separate C specific warnings
from loose_warn into c_loose_warn and from strict_warn into
c_strict_warn. Set and substitute warn_cxxflags. Check for
--enable-build-with-cxx. Set and substitute
ENABLE_BUILD_WITH_CXX. Set and substitute HOST_LIBS.
* Makefile.in (CXXFLAGS): New variable.
(C_LOOSE_WARN, C_STRICT_WARN): New variables.
(GCC_WARN_CFLAGS): Add $(C_LOOSE_WARN). Add $(C_STRICT_WARN) if
the default is the same as $(STRICT_WARN).
(GCC_WARN_CXXFLAGS, WARN_CXXFLAGS): New variables.
(CXX): New variable.
(COMPILER): New value if ENABLE_BUILD_WITH_CXX.
(COMPILER_FLAGS, LINKER, LINKER_FLAGS): Likewise.
(ALL_COMPILERFLAGS, ALL_LINKERFLAGS): Likewise.
(HOST_LIBS): New variable.
(GCC_CFLAGS): Add $(C_LOOSE_WARN).
(ALL_CXXFLAGS): New variable.
(LIBS, BACKENDLIBS): Add $(HOST_LIBS).
* doc/install.texi (Configuration): Document
--enable-build-with-cxx, --with-stage1-ldflags,
--with-stage1-libs, --with-boot-ldflags, --with-boot-libs.
* configure: Rebuild.
From-SVN: r148889
2009-06-24 06:03:51 +02:00
# We only bootstrap target libraries listed in bootstrap_target_libs.
case $bootstrap_target_libs in
*,target-$module,*) target_bootstrap_suffix=$bootstrap_suffix ;;
*) target_bootstrap_suffix=no-bootstrap ;;
esac
2009-09-08 19:55:03 +02:00
extrasub_target="$extrasub_target
2004-05-21 10:00:17 +02:00
/^@if target-$module\$/d
2004-06-03 06:53:00 +02:00
/^@endif target-$module\$/d
configure.ac: Add --enable-build-with-cxx.
./: * configure.ac: Add --enable-build-with-cxx. When set, add c++ to
boot_languages. Only bootstrap target libraries listed in
target_libs for some boot language. Add --with-stage1-ldflags,
--with-stage1-libs, --with-boot-ldflags, --with-boot-libs. Remove
with_host_libstdcxx from ppllibs. Only add -fkeep-inline-functions
if not building with C++.
* Makefile.def: For target_module libstdc++-v3, set bootstrap=true.
* Makefile.tpl (STAGE1_LDFLAGS, STAGE1_LIBS): New variables.
(POSTSTAGE1_LDFLAGS, POSTSTAGE1_LIBS): New variables.
(HOST_EXPORTS): Add STAGE1_LDFLAGS to LDFLAGS. Export HOST_LIBS.
(POSTSTAGE1_HOST_EXPORTS): Set CXX and CXX_FOR_BUILD. Add
POSTSTAGE1_LDFLAGS to LDFLAGS. Export HOST_LIBS.
(POSTSTAGE1_FLAGS_TO_PASS): Likewise.
* configure, Makefile.in: Rebuild.
gcc/:
* configure.ac: Invoke AC_PROG_CXX. Separate C specific warnings
from loose_warn into c_loose_warn and from strict_warn into
c_strict_warn. Set and substitute warn_cxxflags. Check for
--enable-build-with-cxx. Set and substitute
ENABLE_BUILD_WITH_CXX. Set and substitute HOST_LIBS.
* Makefile.in (CXXFLAGS): New variable.
(C_LOOSE_WARN, C_STRICT_WARN): New variables.
(GCC_WARN_CFLAGS): Add $(C_LOOSE_WARN). Add $(C_STRICT_WARN) if
the default is the same as $(STRICT_WARN).
(GCC_WARN_CXXFLAGS, WARN_CXXFLAGS): New variables.
(CXX): New variable.
(COMPILER): New value if ENABLE_BUILD_WITH_CXX.
(COMPILER_FLAGS, LINKER, LINKER_FLAGS): Likewise.
(ALL_COMPILERFLAGS, ALL_LINKERFLAGS): Likewise.
(HOST_LIBS): New variable.
(GCC_CFLAGS): Add $(C_LOOSE_WARN).
(ALL_CXXFLAGS): New variable.
(LIBS, BACKENDLIBS): Add $(HOST_LIBS).
* doc/install.texi (Configuration): Document
--enable-build-with-cxx, --with-stage1-ldflags,
--with-stage1-libs, --with-boot-ldflags, --with-boot-libs.
* configure: Rebuild.
From-SVN: r148889
2009-06-24 06:03:51 +02:00
/^@if target-$module-$target_bootstrap_suffix\$/d
/^@endif target-$module-$target_bootstrap_suffix\$/d"
2002-12-16 19:23:00 +01:00
done
2004-06-01 09:43:25 +02:00
2009-09-08 19:55:03 +02:00
# Do the final fixup along with target modules.
extrasub_target="$extrasub_target
2004-05-21 10:00:17 +02:00
/^@if /,/^@endif /d"
2002-12-16 19:23:00 +01:00
# Create the serialization dependencies. This uses a temporary file.
2002-12-29 20:04:40 +01:00
AC_ARG_ENABLE([serial-configure],
2011-01-21 14:18:23 +01:00
[AS_HELP_STRING([[--enable-serial-[{host,target,build}-]configure]],
[force sequential configuration of
sub-packages for the host, target or build
machine, or all sub-packages])])
2003-06-11 05:04:44 +02:00
case ${enable_serial_configure} in
yes)
enable_serial_build_configure=yes
enable_serial_host_configure=yes
enable_serial_target_configure=yes
;;
esac
2002-12-29 20:04:40 +01:00
2002-12-16 19:23:00 +01:00
# These force 'configure's to be done one at a time, to avoid problems
# with contention over a shared config.cache.
rm -f serdep.tmp
2002-12-29 20:04:40 +01:00
echo '# serdep.tmp' > serdep.tmp
2002-12-16 19:23:00 +01:00
olditem=
2003-06-11 05:04:44 +02:00
test "x${enable_serial_build_configure}" = xyes &&
2002-12-16 19:23:00 +01:00
for item in ${build_configdirs} ; do
case ${olditem} in
"") ;;
2002-12-29 20:04:40 +01:00
*) echo "configure-build-${item}: configure-build-${olditem}" >> serdep.tmp ;;
2002-12-16 19:23:00 +01:00
esac
olditem=${item}
done
olditem=
2003-06-11 05:04:44 +02:00
test "x${enable_serial_host_configure}" = xyes &&
2002-12-16 19:23:00 +01:00
for item in ${configdirs} ; do
case ${olditem} in
"") ;;
2002-12-29 20:04:40 +01:00
*) echo "configure-${item}: configure-${olditem}" >> serdep.tmp ;;
2002-12-16 19:23:00 +01:00
esac
olditem=${item}
done
olditem=
2003-06-11 05:04:44 +02:00
test "x${enable_serial_target_configure}" = xyes &&
2002-12-16 19:23:00 +01:00
for item in ${target_configdirs} ; do
case ${olditem} in
"") ;;
2002-12-29 20:04:40 +01:00
*) echo "configure-target-${item}: configure-target-${olditem}" >> serdep.tmp ;;
2002-12-16 19:23:00 +01:00
esac
olditem=${item}
done
configure.in: Convert to autoconf script.
(toplev)
* configure.in: Convert to autoconf script. Blow away lots
of now-redundant Makefile fragments.
* configure: Generate using Autoconf.
* Makefile.tpl: Rewrite to reflect autoconfiscation.
* Makefile.in: Regenerate.
(config)
* acx.m4: New.
* mh-a68bsd, mh-aix386, mh-apollo68, mh-delta88, mh-hp300,
mh-hpux, mh-hpux8, mh-irix5, mh-irix6, mh-ncrsvr43, mh-openedition,
mh-riscos, mh-sysv: Delete.
* mh-cxux, mh-dgux386, mh-interix, mh-lynxrs6k, mh-ncr3000,
mh-necv4, mh-sco, mh-solaris, mh-sysv4, mh-sysv5, mt-v810: Simplify.
From-SVN: r60558
2002-12-28 07:57:50 +01:00
serialization_dependencies=serdep.tmp
AC_SUBST_FILE(serialization_dependencies)
2002-10-03 20:50:19 +02:00
2002-12-29 20:04:40 +01:00
# Base args. Strip norecursion, cache-file, srcdir, host, build,
2007-02-09 16:14:37 +01:00
# target, nonopt, and variable assignments. These are the ones we
2009-09-25 21:23:40 +02:00
# might not want to pass down to subconfigures. The exception being
# --cache-file=/dev/null, which is used to turn off the use of cache
# files altogether, and which should be passed on to subconfigures.
# Also strip program-prefix, program-suffix, and program-transform-name,
# so that we can pass down a consistent program-transform-name.
2007-02-09 16:14:37 +01:00
baseargs=
2011-01-31 06:20:17 +01:00
tbaseargs=
2007-02-09 16:14:37 +01:00
keep_next=no
skip_next=no
eval "set -- $ac_configure_args"
2007-02-09 23:33:51 +01:00
for ac_arg
do
2007-02-09 16:14:37 +01:00
if test X"$skip_next" = X"yes"; then
skip_next=no
continue
fi
if test X"$keep_next" = X"yes"; then
case $ac_arg in
*\'*)
ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
esac
baseargs="$baseargs '$ac_arg'"
2011-01-31 06:20:17 +01:00
tbaseargs="$tbaseargs '$ac_arg'"
2007-02-09 16:14:37 +01:00
keep_next=no
continue
fi
# Handle separated arguments. Based on the logic generated by
# autoconf 2.59.
case $ac_arg in
*=* | --config-cache | -C | -disable-* | --disable-* \
| -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
| -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
| -with-* | --with-* | -without-* | --without-* | --x)
separate_arg=no
;;
-*)
separate_arg=yes
;;
*)
separate_arg=no
;;
esac
2011-01-31 06:20:17 +01:00
skip_targ=no
case $ac_arg in
changequote(,)
--with-* | --without-*)
libopt=`echo "$ac_arg" | sed -e 's,^--[^-_]*[-_],,' -e 's,=.*$,,'`
case $libopt in
*[-_]include)
lib=`echo "$libopt" | sed 's,[-_]include$,,'`
;;
*[-_]lib)
lib=`echo "$libopt" | sed 's,[-_]lib$,,'`
;;
*)
lib=$libopt
;;
esac
changequote([,])
case $lib in
2014-11-11 19:54:16 +01:00
mpc | mpfr | gmp | isl)
2011-01-31 06:20:17 +01:00
# If we're processing --with-$lib, --with-$lib-include or
# --with-$lib-lib, for one of the libs above, and target is
# different from host, don't pass the current argument to any
# target library's configure.
if test x$is_cross_compiler = xyes; then
skip_targ=yes
fi
;;
esac
;;
esac
2007-02-09 16:14:37 +01:00
case "$ac_arg" in
2009-09-25 21:23:40 +02:00
--cache-file=/dev/null | \
-cache-file=/dev/null )
# Handled here to avoid the test to skip args below.
baseargs="$baseargs '$ac_arg'"
2011-01-31 06:20:17 +01:00
tbaseargs="$tbaseargs '$ac_arg'"
2009-09-25 21:23:40 +02:00
# Assert: $separate_arg should always be no.
keep_next=$separate_arg
;;
2007-02-09 16:14:37 +01:00
--no*)
continue
;;
--c* | \
--sr* | \
--ho* | \
--bu* | \
--t* | \
--program-* | \
-cache_file* | \
-srcdir* | \
-host* | \
-build* | \
-target* | \
-program-prefix* | \
-program-suffix* | \
-program-transform-name* )
skip_next=$separate_arg
continue
;;
-*)
# An option. Add it.
case $ac_arg in
*\'*)
ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
esac
baseargs="$baseargs '$ac_arg'"
2011-01-31 06:20:17 +01:00
if test X"$skip_targ" = Xno; then
tbaseargs="$tbaseargs '$ac_arg'"
fi
2007-02-09 16:14:37 +01:00
keep_next=$separate_arg
;;
*)
# Either a variable assignment, or a nonopt (triplet). Don't
# pass it down; let the Makefile handle this.
continue
;;
esac
done
# Remove the initial space we just introduced and, as these will be
# expanded by make, quote '$'.
baseargs=`echo "x$baseargs" | sed -e 's/^x *//' -e 's,\\$,$$,g'`
1997-08-22 00:57:35 +02:00
2003-09-21 21:32:22 +02:00
# Add in --program-transform-name, after --program-prefix and
# --program-suffix have been applied to it. Autoconf has already
# doubled dollar signs and backslashes in program_transform_name; we want
# the backslashes un-doubled, and then the entire thing wrapped in single
# quotes, because this will be expanded first by make and then by the shell.
# Also, because we want to override the logic in subdir configure scripts to
# choose program_transform_name, replace any s,x,x, with s,y,y,.
sed -e "s,\\\\\\\\,\\\\,g; s,','\\\\'',g; s/s,x,x,/s,y,y,/" <<EOF_SED > conftestsed.out
${program_transform_name}
EOF_SED
gcc_transform_name=`cat conftestsed.out`
rm -f conftestsed.out
baseargs="$baseargs --program-transform-name='${gcc_transform_name}'"
2011-01-31 06:20:17 +01:00
tbaseargs="$tbaseargs --program-transform-name='${gcc_transform_name}'"
2007-08-13 03:24:29 +02:00
if test "$silent" = yes; then
baseargs="$baseargs --silent"
2011-01-31 06:20:17 +01:00
tbaseargs="$tbaseargs --silent"
2007-08-13 03:24:29 +02:00
fi
2009-08-20 00:19:37 +02:00
baseargs="$baseargs --disable-option-checking"
2011-01-31 06:20:17 +01:00
tbaseargs="$tbaseargs --disable-option-checking"
2003-09-21 21:32:22 +02:00
2010-10-02 16:52:07 +02:00
# Record and document user additions to sub configure arguments.
AC_ARG_VAR([build_configargs],
[additional configure arguments for build directories])
AC_ARG_VAR([host_configargs],
[additional configure arguments for host directories])
AC_ARG_VAR([target_configargs],
[additional configure arguments for target directories])
2001-11-28 02:37:24 +01:00
# For the build-side libraries, we just need to pretend we're native,
# and not use the same cache file. Multilibs are neither needed nor
2014-10-24 16:30:35 +02:00
# desired. We can't even use the same cache file for all build-side
# libraries, as they're compiled differently; some with C, some with
# C++ or with different feature-enabling options.
build_configargs="$build_configargs --cache-file=./config.cache ${baseargs}"
2002-05-13 23:11:55 +02:00
2002-12-16 19:23:00 +01:00
# For host modules, accept cache file option, or specification as blank.
case "${cache_file}" in
"") # empty
cache_file_option="" ;;
configure.in: Convert to autoconf script.
(toplev)
* configure.in: Convert to autoconf script. Blow away lots
of now-redundant Makefile fragments.
* configure: Generate using Autoconf.
* Makefile.tpl: Rewrite to reflect autoconfiscation.
* Makefile.in: Regenerate.
(config)
* acx.m4: New.
* mh-a68bsd, mh-aix386, mh-apollo68, mh-delta88, mh-hp300,
mh-hpux, mh-hpux8, mh-irix5, mh-irix6, mh-ncrsvr43, mh-openedition,
mh-riscos, mh-sysv: Delete.
* mh-cxux, mh-dgux386, mh-interix, mh-lynxrs6k, mh-ncr3000,
mh-necv4, mh-sco, mh-solaris, mh-sysv4, mh-sysv5, mt-v810: Simplify.
From-SVN: r60558
2002-12-28 07:57:50 +01:00
/* | [[A-Za-z]]:[[\\/]]* ) # absolute path
2002-12-16 19:23:00 +01:00
cache_file_option="--cache-file=${cache_file}" ;;
*) # relative path
cache_file_option="--cache-file=../${cache_file}" ;;
esac
2004-01-05 01:49:59 +01:00
# Host dirs don't like to share a cache file either, horribly enough.
# This seems to be due to autoconf 2.5x stupidity.
2010-10-02 16:52:07 +02:00
host_configargs="$host_configargs --cache-file=./config.cache ${extra_host_args} ${baseargs}"
2002-12-16 19:23:00 +01:00
2011-01-31 06:20:17 +01:00
target_configargs="$target_configargs ${tbaseargs}"
2001-11-28 02:37:24 +01:00
1997-08-22 00:57:35 +02:00
# Passing a --with-cross-host argument lets the target libraries know
# whether they are being built with a cross-compiler or being built
# native. However, it would be better to use other mechanisms to make the
# sorts of decisions they want to make on this basis. Please consider
# this option to be deprecated. FIXME.
2002-04-30 05:16:53 +02:00
if test x${is_cross_compiler} = xyes ; then
2007-02-09 16:14:37 +01:00
target_configargs="--with-cross-host=${host_noncanonical} ${target_configargs}"
1997-08-22 00:57:35 +02:00
fi
2013-12-13 22:42:02 +01:00
# Special user-friendly check for native x86_64-linux build, if
# multilib is not explicitly enabled.
case "$target:$have_compiler:$host:$target:$enable_multilib" in
x86_64-*linux*:yes:$build:$build:)
2015-05-11 20:09:35 +02:00
# Make sure we have a development environment that handles 32-bit
2013-12-13 22:42:02 +01:00
dev64=no
echo "int main () { return 0; }" > conftest.c
${CC} -m32 -o conftest ${CFLAGS} ${CPPFLAGS} ${LDFLAGS} conftest.c
if test $? = 0 ; then
if test -s conftest || test -s conftest.exe ; then
dev64=yes
fi
fi
rm -f conftest*
if test x${dev64} != xyes ; then
2015-05-11 20:09:35 +02:00
AC_MSG_ERROR([I suspect your system does not have 32-bit development libraries (libc and headers). If you have them, rerun configure with --enable-multilib. If you do not have them, and want to build a 64-bit-only compiler, rerun configure with --disable-multilib.])
2013-12-13 22:42:02 +01:00
fi
;;
esac
2010-04-01 18:32:38 +02:00
# Default to --enable-multilib.
if test x${enable_multilib} = x ; then
2002-12-28 01:59:52 +01:00
target_configargs="--enable-multilib ${target_configargs}"
2010-04-01 18:32:38 +02:00
fi
1997-08-22 00:57:35 +02:00
1998-10-12 12:44:57 +02:00
# Pass --with-newlib if appropriate. Note that target_configdirs has
# changed from the earlier setting of with_newlib.
2002-04-30 05:16:53 +02:00
if test x${with_newlib} != xno && echo " ${target_configdirs} " | grep " newlib " > /dev/null 2>&1 && test -d ${srcdir}/newlib ; then
2002-12-28 01:59:52 +01:00
target_configargs="--with-newlib ${target_configargs}"
1998-10-12 12:44:57 +02:00
fi
2004-01-03 19:23:22 +01:00
# Different target subdirs use different values of certain variables
# (notably CXX). Worse, multilibs use *lots* of different values.
# Worse yet, autoconf 2.5x makes some of these 'precious', meaning that
# it doesn't automatically accept command-line overrides of them.
# This means it's not safe for target subdirs to share a cache file,
# which is disgusting, but there you have it. Hopefully this can be
# fixed in future. It's still worthwhile to use a cache file for each
# directory. I think.
2005-05-05 02:59:26 +02:00
# Pass the appropriate --build, --host, --target and --cache-file arguments.
# We need to pass --target, as newer autoconf's requires consistency
# for target_alias and gcc doesn't manage it consistently.
2007-01-11 12:20:44 +01:00
target_configargs="--cache-file=./config.cache ${target_configargs}"
2001-11-28 02:37:24 +01:00
2000-07-28 04:10:47 +02:00
FLAGS_FOR_TARGET=
2002-07-11 21:54:04 +02:00
case " $target_configdirs " in
2000-08-25 09:04:49 +02:00
*" newlib "*)
2002-12-28 01:59:52 +01:00
case " $target_configargs " in
2000-08-25 09:04:49 +02:00
*" --with-newlib "*)
2000-07-28 04:10:47 +02:00
case "$target" in
2009-11-06 11:16:30 +01:00
*-cygwin*)
2012-11-04 00:56:44 +01:00
FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/$(TARGET_SUBDIR)/winsup/cygwin -isystem $$s/winsup/cygwin/include'
2009-11-06 11:16:30 +01:00
;;
2000-07-28 04:10:47 +02:00
esac
2000-09-02 09:18:09 +02:00
# If we're not building GCC, don't discard standard headers.
2002-06-20 01:57:38 +02:00
if test -d ${srcdir}/gcc; then
2000-07-30 07:35:14 +02:00
FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -nostdinc'
2000-09-02 09:18:09 +02:00
if test "${build}" != "${host}"; then
# On Canadian crosses, CC_FOR_TARGET will have already been set
# by `configure', so we won't have an opportunity to add -Bgcc/
# to it. This is right: we don't want to search that directory
# for binaries, but we want the header files in there, so add
# them explicitly.
2010-11-13 20:45:12 +01:00
FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -isystem $$r/$(HOST_SUBDIR)/gcc/include -isystem $$r/$(HOST_SUBDIR)/gcc/include-fixed'
2000-09-02 09:18:09 +02:00
# Someone might think of using the pre-installed headers on
# Canadian crosses, in case the installed compiler is not fully
# compatible with the compiler being built. In this case, it
# would be better to flag an error than risking having
# incompatible object files being constructed. We can't
# guarantee that an error will be flagged, but let's hope the
# compiler will do it, when presented with incompatible header
# files.
fi
2000-07-30 07:35:14 +02:00
fi
i2002-04-11 DJ Delorie <dj@redhat.com>
* Makefile.in, configure.in: Sync with binutils, entries
follow...
2002-02-01 Mo DeJong <supermo@bayarea.net>
* Makefile.in: Add all-tix to deps for all-snavigator
so that tix is built when building snavigator.
2002-01-11 Steve Ellcey <sje@cup.hp.com>
* configure.in (ia64*-*-hpux*): New target for IA64 HP-UX,
ld and gdb are not supported.
2002-01-07 Mark Salter <msalter@redhat.com>
* configure.in: Remove target-bsp and target-cygmon from arm builds.
Allow target-libgloss to be built for arm, strongarm, and xscale.
2001-12-13 Thomas Fitzsimmons <fitzsim@redhat.com>
* configure.in (FLAGS_FOR_TARGET): Remove -nostdinc and -isystem
options for i[3456]86-pc-linux* native builds.
2001-11-20 Nick Clifton <nickc@cambridge.redhat.com>
* Makefile.in (do-proto-toplev): Use msgfmt to generate .gmo
files from .po files for a distribution.
2001-09-03 Jeff Holcomb <jeffh@redhat.com>
* configure.in: Enable libstdc++-v3 for h8300 targets.
2001-06-19 Alan Modra <amodra@bigpond.net.au>
* Makefile.in (VER): If AM_INIT_AUTOMAKE uses BFD_VERSION, get
version from bfd/.
Fri Jun 8 11:14:02 2001 Andrew Cagney <cagney@b1.cygnus.com>
* Makefile.in (VER): When present, extract the version number from
the file version.in.
2001-05-24 Tom Rix <trix@redhat.com>
* configure.in : enable ld for aix
2001-02-09 Martin Schwidefsky <schwidefsky@de.ibm.com>
* mh-s390pic: New file.
* mt-s390pic: New file.
2001-02-09 Martin Schwidefsky <schwidefsky@de.ibm.com>
* config.guess: Add linux target for S/390.
2000-11-07 Philip Blundell <pb@futuretv.com>
* Makefile.in (ETC_SUPPORT): Also add configbuild.* and configdev.*.
2000-11-03 Philip Blundell <pb@futuretv.com>
* Makefile.in (ETC_SUPPORT): Add configure.texi and associated info
files.
2001-01-15 Ben Elliston <bje@redhat.com>
* configure.in (host_tools): Add sid.
Always configure cgen.
2000-11-24 Nick Clifton <nickc@redhat.com>
* configure.in (c4x, c5x, tic54x): Move after ARM targets.
2000-08-20 Doug Evans <dje@casey.transmeta.com>
* Makefile.in (ALL_MODULES): Add all-cgen.
(CROSS_CHECK_MODULES,INSTALL_MODULES,CLEAN_MODULES): Similarily.
(all-cgen): New target.
(all-opcodes,all-sim): Depend on all-cgen.
* configure.in (host_tools): Add cgen.
Only configure cgen if --enable-cgen-maint.
From-SVN: r52179
2002-04-11 23:23:35 +02:00
case "${target}-${is_cross_compiler}" in
2003-05-19 20:10:21 +02:00
i[[3456789]]86-*-linux*-no)
i2002-04-11 DJ Delorie <dj@redhat.com>
* Makefile.in, configure.in: Sync with binutils, entries
follow...
2002-02-01 Mo DeJong <supermo@bayarea.net>
* Makefile.in: Add all-tix to deps for all-snavigator
so that tix is built when building snavigator.
2002-01-11 Steve Ellcey <sje@cup.hp.com>
* configure.in (ia64*-*-hpux*): New target for IA64 HP-UX,
ld and gdb are not supported.
2002-01-07 Mark Salter <msalter@redhat.com>
* configure.in: Remove target-bsp and target-cygmon from arm builds.
Allow target-libgloss to be built for arm, strongarm, and xscale.
2001-12-13 Thomas Fitzsimmons <fitzsim@redhat.com>
* configure.in (FLAGS_FOR_TARGET): Remove -nostdinc and -isystem
options for i[3456]86-pc-linux* native builds.
2001-11-20 Nick Clifton <nickc@cambridge.redhat.com>
* Makefile.in (do-proto-toplev): Use msgfmt to generate .gmo
files from .po files for a distribution.
2001-09-03 Jeff Holcomb <jeffh@redhat.com>
* configure.in: Enable libstdc++-v3 for h8300 targets.
2001-06-19 Alan Modra <amodra@bigpond.net.au>
* Makefile.in (VER): If AM_INIT_AUTOMAKE uses BFD_VERSION, get
version from bfd/.
Fri Jun 8 11:14:02 2001 Andrew Cagney <cagney@b1.cygnus.com>
* Makefile.in (VER): When present, extract the version number from
the file version.in.
2001-05-24 Tom Rix <trix@redhat.com>
* configure.in : enable ld for aix
2001-02-09 Martin Schwidefsky <schwidefsky@de.ibm.com>
* mh-s390pic: New file.
* mt-s390pic: New file.
2001-02-09 Martin Schwidefsky <schwidefsky@de.ibm.com>
* config.guess: Add linux target for S/390.
2000-11-07 Philip Blundell <pb@futuretv.com>
* Makefile.in (ETC_SUPPORT): Also add configbuild.* and configdev.*.
2000-11-03 Philip Blundell <pb@futuretv.com>
* Makefile.in (ETC_SUPPORT): Add configure.texi and associated info
files.
2001-01-15 Ben Elliston <bje@redhat.com>
* configure.in (host_tools): Add sid.
Always configure cgen.
2000-11-24 Nick Clifton <nickc@redhat.com>
* configure.in (c4x, c5x, tic54x): Move after ARM targets.
2000-08-20 Doug Evans <dje@casey.transmeta.com>
* Makefile.in (ALL_MODULES): Add all-cgen.
(CROSS_CHECK_MODULES,INSTALL_MODULES,CLEAN_MODULES): Similarily.
(all-cgen): New target.
(all-opcodes,all-sim): Depend on all-cgen.
* configure.in (host_tools): Add cgen.
Only configure cgen if --enable-cgen-maint.
From-SVN: r52179
2002-04-11 23:23:35 +02:00
# Here host == target, so we don't need to build gcc,
# so we don't want to discard standard headers.
FLAGS_FOR_TARGET=`echo " $FLAGS_FOR_TARGET " | sed -e 's/ -nostdinc / /'`
;;
*)
# If we're building newlib, use its generic headers last, but search
# for any libc-related directories first (so make it the last -B
# switch).
FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -B$$r/$(TARGET_SUBDIR)/newlib/ -isystem $$r/$(TARGET_SUBDIR)/newlib/targ-include -isystem $$s/newlib/libc/include'
2007-09-10 16:20:10 +02:00
# If we're building libgloss, find the startup file, simulator library
# and linker script.
case " $target_configdirs " in
*" libgloss "*)
# Look for startup file, simulator library and maybe linker script.
FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -B$$r/$(TARGET_SUBDIR)/libgloss/'"$libgloss_dir"
# Look for libnosys.a in case the target needs it.
FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/$(TARGET_SUBDIR)/libgloss/libnosys'
# Most targets have the linker script in the source directory.
FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$s/libgloss/'"$libgloss_dir"
;;
esac
i2002-04-11 DJ Delorie <dj@redhat.com>
* Makefile.in, configure.in: Sync with binutils, entries
follow...
2002-02-01 Mo DeJong <supermo@bayarea.net>
* Makefile.in: Add all-tix to deps for all-snavigator
so that tix is built when building snavigator.
2002-01-11 Steve Ellcey <sje@cup.hp.com>
* configure.in (ia64*-*-hpux*): New target for IA64 HP-UX,
ld and gdb are not supported.
2002-01-07 Mark Salter <msalter@redhat.com>
* configure.in: Remove target-bsp and target-cygmon from arm builds.
Allow target-libgloss to be built for arm, strongarm, and xscale.
2001-12-13 Thomas Fitzsimmons <fitzsim@redhat.com>
* configure.in (FLAGS_FOR_TARGET): Remove -nostdinc and -isystem
options for i[3456]86-pc-linux* native builds.
2001-11-20 Nick Clifton <nickc@cambridge.redhat.com>
* Makefile.in (do-proto-toplev): Use msgfmt to generate .gmo
files from .po files for a distribution.
2001-09-03 Jeff Holcomb <jeffh@redhat.com>
* configure.in: Enable libstdc++-v3 for h8300 targets.
2001-06-19 Alan Modra <amodra@bigpond.net.au>
* Makefile.in (VER): If AM_INIT_AUTOMAKE uses BFD_VERSION, get
version from bfd/.
Fri Jun 8 11:14:02 2001 Andrew Cagney <cagney@b1.cygnus.com>
* Makefile.in (VER): When present, extract the version number from
the file version.in.
2001-05-24 Tom Rix <trix@redhat.com>
* configure.in : enable ld for aix
2001-02-09 Martin Schwidefsky <schwidefsky@de.ibm.com>
* mh-s390pic: New file.
* mt-s390pic: New file.
2001-02-09 Martin Schwidefsky <schwidefsky@de.ibm.com>
* config.guess: Add linux target for S/390.
2000-11-07 Philip Blundell <pb@futuretv.com>
* Makefile.in (ETC_SUPPORT): Also add configbuild.* and configdev.*.
2000-11-03 Philip Blundell <pb@futuretv.com>
* Makefile.in (ETC_SUPPORT): Add configure.texi and associated info
files.
2001-01-15 Ben Elliston <bje@redhat.com>
* configure.in (host_tools): Add sid.
Always configure cgen.
2000-11-24 Nick Clifton <nickc@redhat.com>
* configure.in (c4x, c5x, tic54x): Move after ARM targets.
2000-08-20 Doug Evans <dje@casey.transmeta.com>
* Makefile.in (ALL_MODULES): Add all-cgen.
(CROSS_CHECK_MODULES,INSTALL_MODULES,CLEAN_MODULES): Similarily.
(all-cgen): New target.
(all-opcodes,all-sim): Depend on all-cgen.
* configure.in (host_tools): Add cgen.
Only configure cgen if --enable-cgen-maint.
From-SVN: r52179
2002-04-11 23:23:35 +02:00
;;
esac
2000-07-28 04:10:47 +02:00
;;
2000-08-25 09:04:49 +02:00
esac
;;
2000-07-28 04:10:47 +02:00
esac
2009-11-06 11:16:30 +01:00
2006-08-30 15:48:49 +02:00
case "$target" in
2009-11-06 11:16:30 +01:00
x86_64-*mingw* | *-w64-mingw*)
# MinGW-w64 does not use newlib, nor does it use winsup. It may,
# however, use a symlink named 'mingw' in ${prefix} .
FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L${prefix}/${target}/lib -L${prefix}/mingw/lib -isystem ${prefix}/${target}/include -isystem ${prefix}/mingw/include'
;;
*-mingw*)
# MinGW can't be handled as Cygwin above since it does not use newlib.
FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/$(TARGET_SUBDIR)/winsup/mingw -L$$r/$(TARGET_SUBDIR)/winsup/w32api/lib -isystem $$s/winsup/mingw/include -isystem $$s/winsup/w32api/include'
;;
2006-08-30 15:48:49 +02:00
esac
2000-07-30 07:35:14 +02:00
2003-10-06 05:40:08 +02:00
# Allow the user to override the flags for
# our build compiler if desired.
2007-10-08 11:29:55 +02:00
if test x"${build}" = x"${host}" ; then
CFLAGS_FOR_BUILD=${CFLAGS_FOR_BUILD-${CFLAGS}}
CXXFLAGS_FOR_BUILD=${CXXFLAGS_FOR_BUILD-${CXXFLAGS}}
LDFLAGS_FOR_BUILD=${LDFLAGS_FOR_BUILD-${LDFLAGS}}
fi
2003-10-06 05:40:08 +02:00
2000-07-30 07:35:14 +02:00
# On Canadian crosses, we'll be searching the right directories for
# the previously-installed cross compiler, so don't bother to add
# flags for directories within the install tree of the compiler
# being built; programs in there won't even run.
2002-06-20 01:57:38 +02:00
if test "${build}" = "${host}" && test -d ${srcdir}/gcc; then
2000-07-28 04:10:47 +02:00
# Search for pre-installed headers if nothing else fits.
2003-03-04 20:43:35 +01:00
FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -B$(build_tooldir)/bin/ -B$(build_tooldir)/lib/ -isystem $(build_tooldir)/include -isystem $(build_tooldir)/sys-include'
2000-07-28 04:10:47 +02:00
fi
2000-07-30 07:35:14 +02:00
2002-07-11 21:54:04 +02:00
if test "x${use_gnu_ld}" = x &&
2002-07-01 23:01:48 +02:00
echo " ${configdirs} " | grep " ld " > /dev/null ; then
2000-07-28 04:10:47 +02:00
# Arrange for us to find uninstalled linker scripts.
re PR bootstrap/17383 (Building in src dir fails)
2005-05-25 Paolo Bonzini <bonzini@gnu.org>
PR bootstrap/17383
* Makefile.def (target_modules): Remove "stage", now unnecessary.
* Makefile.tpl (HOST_SUBDIR): New substitution.
(STAGE_HOST_EXPORTS, EXPECT, HOST_LIB_PATH, USUAL_AR_FOR_TARGET,
USUAL_AS_FOR_TARGET, USUAL_DLLTOOL_FOR_TARGET, USUAL_GCC_FOR_TARGET,
USUAL_LD_FOR_TARGET, USUAL_NM_FOR_TARGET, USUAL_OBJDUMP_FOR_TARGET,
USUAL_RANLIB_FOR_TARGET, USUAL_WINDRES_FOR_TARGET): Use it.
(Host modules, Bootstrapped modules): Use it.
(Build modules, Target modules): Do not create symlink trees,
always configure out-of-srcdir.
(distclean): Try removing $(host_subdir) with rm before using rm -rf.
* configure.in (FLAGS_FOR_TARGET, CC_FOR_TARGET, GCJ_FOR_TARGET,
GFORTRAN_FOR_TARGET, CXX_FOR_TARGET, RAW_CXX_FOR_TARGET): Use
$(HOST_SUBDIR). Create a symlink for host_subdir.
* Makefile.in: Regenerate.
* configure: Regenerate.
config:
2005-05-25 Paolo Bonzini <bonzini@gnu.org>
PR bootstrap/17383
* config/acx.m4 (GCC_TOPLEV_SUBDIRS): Set HOST_SUBDIR if an in-src
gcc build is going.
gcc:
2005-05-25 Paolo Bonzini <bonzini@gnu.org>
PR bootstrap/17383
* gcc/Makefile.in (host_subdir): New.
(build_objdir): New. Replace ../$(build_subdir) with it throughout.
* gcc/configure: Regenerate.
libada:
2005-05-25 Paolo Bonzini <bonzini@gnu.org>
PR bootstrap/17383
* Makefile.in (GCC_DIR): Add $(HOST_SUBDIR) to the definition.
libjava:
2005-05-25 Paolo Bonzini <bonzini@gnu.org>
PR bootstrap/17383
* configure.ac: Call GCC_TOPLEV_SUBDIRS.
(COMPPATH): Removed.
(ZIP, GCJH): Replace it with ../$(host_subdir).
(built_gcc_dir): Add $(host_subdir).
* configure: Regenerate.
* Makefile.in, include/Makefile.in, testsuite/Makefile.in,
gcj/Makefile.in, external/Makefile.in, external/sax/Makefile.in,
external/w3c_dom/Makefile.in: Regenerate.
libobjc:
2005-05-25 Paolo Bonzini <bonzini@gnu.org>
PR bootstrap/17383
* configure.ac: Call GCC_TOPLEV_SUBDIRS.
(Determine CFLAGS for gthread): Use $host_subdir.
* configure: Regenerate.
* Makefile.in (host_subdir): New.
(INCLUDES): Use it.
From-SVN: r95680
2005-02-28 14:26:36 +01:00
FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/$(HOST_SUBDIR)/ld'
2000-07-28 04:10:47 +02:00
fi
2006-04-19 02:56:33 +02:00
# Search for other target-specific linker scripts and such.
case "${target}" in
2007-02-09 17:44:18 +01:00
mep*)
FLAGS_FOR_TARGET="$FLAGS_FOR_TARGET -mlibrary"
;;
2006-04-19 02:56:33 +02:00
esac
configure.in: Convert to autoconf script.
(toplev)
* configure.in: Convert to autoconf script. Blow away lots
of now-redundant Makefile fragments.
* configure: Generate using Autoconf.
* Makefile.tpl: Rewrite to reflect autoconfiscation.
* Makefile.in: Regenerate.
(config)
* acx.m4: New.
* mh-a68bsd, mh-aix386, mh-apollo68, mh-delta88, mh-hp300,
mh-hpux, mh-hpux8, mh-irix5, mh-irix6, mh-ncrsvr43, mh-openedition,
mh-riscos, mh-sysv: Delete.
* mh-cxux, mh-dgux386, mh-interix, mh-lynxrs6k, mh-ncr3000,
mh-necv4, mh-sco, mh-solaris, mh-sysv4, mh-sysv5, mt-v810: Simplify.
From-SVN: r60558
2002-12-28 07:57:50 +01:00
# Makefile fragments.
2004-07-05 23:07:13 +02:00
for frag in host_makefile_frag target_makefile_frag alphaieee_frag ospace_frag;
do
eval fragval=\$$frag
if test $fragval != /dev/null; then
eval $frag=${srcdir}/$fragval
fi
done
configure.in: Convert to autoconf script.
(toplev)
* configure.in: Convert to autoconf script. Blow away lots
of now-redundant Makefile fragments.
* configure: Generate using Autoconf.
* Makefile.tpl: Rewrite to reflect autoconfiscation.
* Makefile.in: Regenerate.
(config)
* acx.m4: New.
* mh-a68bsd, mh-aix386, mh-apollo68, mh-delta88, mh-hp300,
mh-hpux, mh-hpux8, mh-irix5, mh-irix6, mh-ncrsvr43, mh-openedition,
mh-riscos, mh-sysv: Delete.
* mh-cxux, mh-dgux386, mh-interix, mh-lynxrs6k, mh-ncr3000,
mh-necv4, mh-sco, mh-solaris, mh-sysv4, mh-sysv5, mt-v810: Simplify.
From-SVN: r60558
2002-12-28 07:57:50 +01:00
AC_SUBST_FILE(host_makefile_frag)
AC_SUBST_FILE(target_makefile_frag)
AC_SUBST_FILE(alphaieee_frag)
AC_SUBST_FILE(ospace_frag)
# Miscellanea: directories, flags, etc.
AC_SUBST(RPATH_ENVVAR)
2008-08-31 20:14:25 +02:00
AC_SUBST(GCC_SHLIB_SUBDIR)
configure.in: Convert to autoconf script.
(toplev)
* configure.in: Convert to autoconf script. Blow away lots
of now-redundant Makefile fragments.
* configure: Generate using Autoconf.
* Makefile.tpl: Rewrite to reflect autoconfiscation.
* Makefile.in: Regenerate.
(config)
* acx.m4: New.
* mh-a68bsd, mh-aix386, mh-apollo68, mh-delta88, mh-hp300,
mh-hpux, mh-hpux8, mh-irix5, mh-irix6, mh-ncrsvr43, mh-openedition,
mh-riscos, mh-sysv: Delete.
* mh-cxux, mh-dgux386, mh-interix, mh-lynxrs6k, mh-ncr3000,
mh-necv4, mh-sco, mh-solaris, mh-sysv4, mh-sysv5, mt-v810: Simplify.
From-SVN: r60558
2002-12-28 07:57:50 +01:00
AC_SUBST(tooldir)
AC_SUBST(build_tooldir)
2005-11-11 22:47:07 +01:00
AC_SUBST(CONFIGURE_GDB_TK)
configure.in: Convert to autoconf script.
(toplev)
* configure.in: Convert to autoconf script. Blow away lots
of now-redundant Makefile fragments.
* configure: Generate using Autoconf.
* Makefile.tpl: Rewrite to reflect autoconfiscation.
* Makefile.in: Regenerate.
(config)
* acx.m4: New.
* mh-a68bsd, mh-aix386, mh-apollo68, mh-delta88, mh-hp300,
mh-hpux, mh-hpux8, mh-irix5, mh-irix6, mh-ncrsvr43, mh-openedition,
mh-riscos, mh-sysv: Delete.
* mh-cxux, mh-dgux386, mh-interix, mh-lynxrs6k, mh-ncr3000,
mh-necv4, mh-sco, mh-solaris, mh-sysv4, mh-sysv5, mt-v810: Simplify.
From-SVN: r60558
2002-12-28 07:57:50 +01:00
AC_SUBST(GDB_TK)
2005-11-11 22:47:07 +01:00
AC_SUBST(INSTALL_GDB_TK)
configure.in: Convert to autoconf script.
(toplev)
* configure.in: Convert to autoconf script. Blow away lots
of now-redundant Makefile fragments.
* configure: Generate using Autoconf.
* Makefile.tpl: Rewrite to reflect autoconfiscation.
* Makefile.in: Regenerate.
(config)
* acx.m4: New.
* mh-a68bsd, mh-aix386, mh-apollo68, mh-delta88, mh-hp300,
mh-hpux, mh-hpux8, mh-irix5, mh-irix6, mh-ncrsvr43, mh-openedition,
mh-riscos, mh-sysv: Delete.
* mh-cxux, mh-dgux386, mh-interix, mh-lynxrs6k, mh-ncr3000,
mh-necv4, mh-sco, mh-solaris, mh-sysv4, mh-sysv5, mt-v810: Simplify.
From-SVN: r60558
2002-12-28 07:57:50 +01:00
# Build module lists & subconfigure args.
AC_SUBST(build_configargs)
Makefile.def (build_modules): Add bison, byacc, flex, m4, texinfo.
2004-07-01 Paolo Bonzini <bonzini@gnu.org>
* Makefile.def (build_modules): Add bison, byacc, flex,
m4, texinfo.
(flags_to_pass): Add FLEX.
* Makefile.tpl (BUILD_DIR_PREFIX, BASE_EXPORTS): New.
(BUILD_EXPORTS, HOST_EXPORTS, BASE_TARGET_EXPORTS): Include it.
(DEFAULT_YACC, USUAL_YACC, DEFAULT_LEX, USUAL_LEX, DEFAULT_M4,
DEFAULT_MAKEINFO): Remove.
(CONFIGURED_YACC, CONFIGURED_FLEX, CONFIGURED_BISON,
CONFIGURED_LEX, CONFIGURED_M4, CONFIGURED_MAKEINFO): Substitute.
(YACC, FLEX, BISON, LEX, M4, MAKEINFO): Define to look into
objdir or else use configured tool.
(all-build): New.
(all): Depend on it.
(Build module dependencies): Add.
* Makefile.in: Regenerate.
* configure.in: Better support for multiple build modules,
matching what is done for host/target modules. Do not look
for "plausible" locations of build tools if Canadian cross.
Use autoconf's AC_PROG_CC to find a C compiler. Define
BUILD_DIR_PREFIX. Look for flex, makeinfo and m4.
* configure: Regenerate.
From-SVN: r84017
2004-07-02 09:55:37 +02:00
AC_SUBST(build_configdirs)
configure.in: Convert to autoconf script.
(toplev)
* configure.in: Convert to autoconf script. Blow away lots
of now-redundant Makefile fragments.
* configure: Generate using Autoconf.
* Makefile.tpl: Rewrite to reflect autoconfiscation.
* Makefile.in: Regenerate.
(config)
* acx.m4: New.
* mh-a68bsd, mh-aix386, mh-apollo68, mh-delta88, mh-hp300,
mh-hpux, mh-hpux8, mh-irix5, mh-irix6, mh-ncrsvr43, mh-openedition,
mh-riscos, mh-sysv: Delete.
* mh-cxux, mh-dgux386, mh-interix, mh-lynxrs6k, mh-ncr3000,
mh-necv4, mh-sco, mh-solaris, mh-sysv4, mh-sysv5, mt-v810: Simplify.
From-SVN: r60558
2002-12-28 07:57:50 +01:00
# Host module lists & subconfigure args.
AC_SUBST(host_configargs)
AC_SUBST(configdirs)
2010-01-22 14:35:38 +01:00
AC_SUBST(target_configdirs)
configure.in: Convert to autoconf script.
(toplev)
* configure.in: Convert to autoconf script. Blow away lots
of now-redundant Makefile fragments.
* configure: Generate using Autoconf.
* Makefile.tpl: Rewrite to reflect autoconfiscation.
* Makefile.in: Regenerate.
(config)
* acx.m4: New.
* mh-a68bsd, mh-aix386, mh-apollo68, mh-delta88, mh-hp300,
mh-hpux, mh-hpux8, mh-irix5, mh-irix6, mh-ncrsvr43, mh-openedition,
mh-riscos, mh-sysv: Delete.
* mh-cxux, mh-dgux386, mh-interix, mh-lynxrs6k, mh-ncr3000,
mh-necv4, mh-sco, mh-solaris, mh-sysv4, mh-sysv5, mt-v810: Simplify.
From-SVN: r60558
2002-12-28 07:57:50 +01:00
# Target module lists & subconfigure args.
AC_SUBST(target_configargs)
2006-02-21 14:57:53 +01:00
configure.in: Convert to autoconf script.
(toplev)
* configure.in: Convert to autoconf script. Blow away lots
of now-redundant Makefile fragments.
* configure: Generate using Autoconf.
* Makefile.tpl: Rewrite to reflect autoconfiscation.
* Makefile.in: Regenerate.
(config)
* acx.m4: New.
* mh-a68bsd, mh-aix386, mh-apollo68, mh-delta88, mh-hp300,
mh-hpux, mh-hpux8, mh-irix5, mh-irix6, mh-ncrsvr43, mh-openedition,
mh-riscos, mh-sysv: Delete.
* mh-cxux, mh-dgux386, mh-interix, mh-lynxrs6k, mh-ncr3000,
mh-necv4, mh-sco, mh-solaris, mh-sysv4, mh-sysv5, mt-v810: Simplify.
From-SVN: r60558
2002-12-28 07:57:50 +01:00
# Build tools.
Makefile.tpl (AR_FOR_BUILD, [...]): Use autoconf substitutions.
2007-10-01 Paolo Bonzini <bonzini@gnu.org>
* Makefile.tpl (AR_FOR_BUILD, AS_FOR_BUILD, CXX_FOR_BUILD,
DLLTOOL_FOR_BUILD, GCJ_FOR_BUILD, GFORTRAN_FOR_BUILD,
LDFLAGS_FOR_BUILD, LD_FOR_BUILD, NM_FOR_BUILD, RANLIB_FOR_BUILD,
WINDMC_FOR_BUILD, WINDRES_FOR_BUILD): Use autoconf substitutions.
* configure.ac: Default them to host tools for $host = $build.
Subst them.
* configure: Regenerate.
* Makefile.in: Regenerate.
From-SVN: r128902
2007-10-01 09:15:42 +02:00
AC_SUBST(AR_FOR_BUILD)
AC_SUBST(AS_FOR_BUILD)
configure.in: Convert to autoconf script.
(toplev)
* configure.in: Convert to autoconf script. Blow away lots
of now-redundant Makefile fragments.
* configure: Generate using Autoconf.
* Makefile.tpl: Rewrite to reflect autoconfiscation.
* Makefile.in: Regenerate.
(config)
* acx.m4: New.
* mh-a68bsd, mh-aix386, mh-apollo68, mh-delta88, mh-hp300,
mh-hpux, mh-hpux8, mh-irix5, mh-irix6, mh-ncrsvr43, mh-openedition,
mh-riscos, mh-sysv: Delete.
* mh-cxux, mh-dgux386, mh-interix, mh-lynxrs6k, mh-ncr3000,
mh-necv4, mh-sco, mh-solaris, mh-sysv4, mh-sysv5, mt-v810: Simplify.
From-SVN: r60558
2002-12-28 07:57:50 +01:00
AC_SUBST(CC_FOR_BUILD)
Makefile.tpl (AR_FOR_BUILD, [...]): Use autoconf substitutions.
2007-10-01 Paolo Bonzini <bonzini@gnu.org>
* Makefile.tpl (AR_FOR_BUILD, AS_FOR_BUILD, CXX_FOR_BUILD,
DLLTOOL_FOR_BUILD, GCJ_FOR_BUILD, GFORTRAN_FOR_BUILD,
LDFLAGS_FOR_BUILD, LD_FOR_BUILD, NM_FOR_BUILD, RANLIB_FOR_BUILD,
WINDMC_FOR_BUILD, WINDRES_FOR_BUILD): Use autoconf substitutions.
* configure.ac: Default them to host tools for $host = $build.
Subst them.
* configure: Regenerate.
* Makefile.in: Regenerate.
From-SVN: r128902
2007-10-01 09:15:42 +02:00
AC_SUBST(CFLAGS_FOR_BUILD)
AC_SUBST(CXXFLAGS_FOR_BUILD)
AC_SUBST(CXX_FOR_BUILD)
AC_SUBST(DLLTOOL_FOR_BUILD)
AC_SUBST(GFORTRAN_FOR_BUILD)
2010-11-19 22:47:18 +01:00
AC_SUBST(GOC_FOR_BUILD)
Makefile.tpl (AR_FOR_BUILD, [...]): Use autoconf substitutions.
2007-10-01 Paolo Bonzini <bonzini@gnu.org>
* Makefile.tpl (AR_FOR_BUILD, AS_FOR_BUILD, CXX_FOR_BUILD,
DLLTOOL_FOR_BUILD, GCJ_FOR_BUILD, GFORTRAN_FOR_BUILD,
LDFLAGS_FOR_BUILD, LD_FOR_BUILD, NM_FOR_BUILD, RANLIB_FOR_BUILD,
WINDMC_FOR_BUILD, WINDRES_FOR_BUILD): Use autoconf substitutions.
* configure.ac: Default them to host tools for $host = $build.
Subst them.
* configure: Regenerate.
* Makefile.in: Regenerate.
From-SVN: r128902
2007-10-01 09:15:42 +02:00
AC_SUBST(LDFLAGS_FOR_BUILD)
AC_SUBST(LD_FOR_BUILD)
AC_SUBST(NM_FOR_BUILD)
AC_SUBST(RANLIB_FOR_BUILD)
AC_SUBST(WINDMC_FOR_BUILD)
AC_SUBST(WINDRES_FOR_BUILD)
configure.in: Convert to autoconf script.
(toplev)
* configure.in: Convert to autoconf script. Blow away lots
of now-redundant Makefile fragments.
* configure: Generate using Autoconf.
* Makefile.tpl: Rewrite to reflect autoconfiscation.
* Makefile.in: Regenerate.
(config)
* acx.m4: New.
* mh-a68bsd, mh-aix386, mh-apollo68, mh-delta88, mh-hp300,
mh-hpux, mh-hpux8, mh-irix5, mh-irix6, mh-ncrsvr43, mh-openedition,
mh-riscos, mh-sysv: Delete.
* mh-cxux, mh-dgux386, mh-interix, mh-lynxrs6k, mh-ncr3000,
mh-necv4, mh-sco, mh-solaris, mh-sysv4, mh-sysv5, mt-v810: Simplify.
From-SVN: r60558
2002-12-28 07:57:50 +01:00
configure.in (CONFIGURED_BISON, [...]): Remove "CONFIGURED_" from the AC_CHECK_PROGS invocation.
toplevel:
2005-12-05 Paolo Bonzini <bonzini@gnu.org>
* configure.in (CONFIGURED_BISON, CONFIGURED_YACC, CONFIGURED_M4,
CONFIGURED_FLEX, CONFIGURED_LEX, CONFIGURED_MAKEINFO): Remove
"CONFIGURED_" from the AC_CHECK_PROGS invocation. Move below.
Find in-tree tools if available.
(EXPECT, RUNTEST, LIPO, STRIP): Find them and substitute them.
(CONFIGURED_*_FOR_TARGET): Don't set nor substitute.
(*_FOR_TARGET): Set them with GCC_TARGET_TOOL.
(COMPILER_*_FOR_TARGET): New.
* Makefile.tpl (HOST_EXPORTS): Add *_FOR_TARGET symbols that gcc needs.
(BASE_TARGET_EXPORTS): Use COMPILER_*_FOR_TARGET symbols.
(CONFIGURED_*, USUAL_*): Remove.
(BISON, YACC, FLEX, LEX, M4, MAKEINFO, EXPECT, RUNTEST, LIPO,
STRIP): Use autoconf substitutions.
(COMPILER_AS_FOR_TARGET, COMPILER_LD_FOR_TARGET,
COMPILER_NM_FOR_TARGET): New.
(EXTRA_HOST_FLAGS): Pass LIPO and STRIP.
(all): Make all-host and all-target in parallel.
(do-[+make_target+], do-check, install, [+compare-target+]): Ensure
that $$r and $$s are set before invoking a recursive make.
(stage[+id+]-bubble): Likewise, and invoke the comparison at the end.
([+bootstrap-target+]): Inline most of the `all' target.
config:
2005-12-05 Paolo Bonzini <bonzini@gnu.org>
* acx.m4 (GCC_TARGET_TOOL): New.
From-SVN: r108059
2005-12-05 16:00:27 +01:00
# Generate default definitions for YACC, M4, LEX and other programs that run
# on the build machine. These are used if the Makefile can't locate these
# programs in objdir.
MISSING=`cd $ac_aux_dir && ${PWDCMD-pwd}`/missing
AC_CHECK_PROGS([YACC], ['bison -y' byacc yacc], [$MISSING bison -y])
case " $build_configdirs " in
*" bison "*) YACC='$$r/$(BUILD_SUBDIR)/bison/tests/bison -y' ;;
esac
AC_CHECK_PROGS([BISON], [bison], [$MISSING bison])
case " $build_configdirs " in
*" bison "*) BISON='$$r/$(BUILD_SUBDIR)/bison/tests/bison' ;;
esac
AC_CHECK_PROGS([M4], [gm4 gnum4 m4], [$MISSING m4])
case " $build_configdirs " in
*" m4 "*) M4='$$r/$(BUILD_SUBDIR)/m4/m4' ;;
esac
AC_CHECK_PROGS([LEX], [flex lex], [$MISSING flex])
case " $build_configdirs " in
*" flex "*) LEX='$$r/$(BUILD_SUBDIR)/flex/flex' ;;
*" lex "*) LEX='$$r/$(BUILD_SUBDIR)/lex/lex' ;;
esac
AC_CHECK_PROGS([FLEX], [flex], [$MISSING flex])
case " $build_configdirs " in
*" flex "*) FLEX='$$r/$(BUILD_SUBDIR)/flex/flex' ;;
esac
AC_CHECK_PROGS([MAKEINFO], makeinfo, [$MISSING makeinfo])
case " $build_configdirs " in
*" texinfo "*) MAKEINFO='$$r/$(BUILD_SUBDIR)/texinfo/makeinfo/makeinfo' ;;
*)
changequote(,)
2009-04-09 17:44:05 +02:00
# For an installed makeinfo, we require it to be from texinfo 4.7 or
configure.in (CONFIGURED_BISON, [...]): Remove "CONFIGURED_" from the AC_CHECK_PROGS invocation.
toplevel:
2005-12-05 Paolo Bonzini <bonzini@gnu.org>
* configure.in (CONFIGURED_BISON, CONFIGURED_YACC, CONFIGURED_M4,
CONFIGURED_FLEX, CONFIGURED_LEX, CONFIGURED_MAKEINFO): Remove
"CONFIGURED_" from the AC_CHECK_PROGS invocation. Move below.
Find in-tree tools if available.
(EXPECT, RUNTEST, LIPO, STRIP): Find them and substitute them.
(CONFIGURED_*_FOR_TARGET): Don't set nor substitute.
(*_FOR_TARGET): Set them with GCC_TARGET_TOOL.
(COMPILER_*_FOR_TARGET): New.
* Makefile.tpl (HOST_EXPORTS): Add *_FOR_TARGET symbols that gcc needs.
(BASE_TARGET_EXPORTS): Use COMPILER_*_FOR_TARGET symbols.
(CONFIGURED_*, USUAL_*): Remove.
(BISON, YACC, FLEX, LEX, M4, MAKEINFO, EXPECT, RUNTEST, LIPO,
STRIP): Use autoconf substitutions.
(COMPILER_AS_FOR_TARGET, COMPILER_LD_FOR_TARGET,
COMPILER_NM_FOR_TARGET): New.
(EXTRA_HOST_FLAGS): Pass LIPO and STRIP.
(all): Make all-host and all-target in parallel.
(do-[+make_target+], do-check, install, [+compare-target+]): Ensure
that $$r and $$s are set before invoking a recursive make.
(stage[+id+]-bubble): Likewise, and invoke the comparison at the end.
([+bootstrap-target+]): Inline most of the `all' target.
config:
2005-12-05 Paolo Bonzini <bonzini@gnu.org>
* acx.m4 (GCC_TARGET_TOOL): New.
From-SVN: r108059
2005-12-05 16:00:27 +01:00
# higher, else we use the "missing" dummy.
if ${MAKEINFO} --version \
2009-04-09 17:44:05 +02:00
| egrep 'texinfo[^0-9]*(4\.([7-9]|[1-9][0-9])|[5-9]|[1-9][0-9])' >/dev/null 2>&1; then
configure.in (CONFIGURED_BISON, [...]): Remove "CONFIGURED_" from the AC_CHECK_PROGS invocation.
toplevel:
2005-12-05 Paolo Bonzini <bonzini@gnu.org>
* configure.in (CONFIGURED_BISON, CONFIGURED_YACC, CONFIGURED_M4,
CONFIGURED_FLEX, CONFIGURED_LEX, CONFIGURED_MAKEINFO): Remove
"CONFIGURED_" from the AC_CHECK_PROGS invocation. Move below.
Find in-tree tools if available.
(EXPECT, RUNTEST, LIPO, STRIP): Find them and substitute them.
(CONFIGURED_*_FOR_TARGET): Don't set nor substitute.
(*_FOR_TARGET): Set them with GCC_TARGET_TOOL.
(COMPILER_*_FOR_TARGET): New.
* Makefile.tpl (HOST_EXPORTS): Add *_FOR_TARGET symbols that gcc needs.
(BASE_TARGET_EXPORTS): Use COMPILER_*_FOR_TARGET symbols.
(CONFIGURED_*, USUAL_*): Remove.
(BISON, YACC, FLEX, LEX, M4, MAKEINFO, EXPECT, RUNTEST, LIPO,
STRIP): Use autoconf substitutions.
(COMPILER_AS_FOR_TARGET, COMPILER_LD_FOR_TARGET,
COMPILER_NM_FOR_TARGET): New.
(EXTRA_HOST_FLAGS): Pass LIPO and STRIP.
(all): Make all-host and all-target in parallel.
(do-[+make_target+], do-check, install, [+compare-target+]): Ensure
that $$r and $$s are set before invoking a recursive make.
(stage[+id+]-bubble): Likewise, and invoke the comparison at the end.
([+bootstrap-target+]): Inline most of the `all' target.
config:
2005-12-05 Paolo Bonzini <bonzini@gnu.org>
* acx.m4 (GCC_TARGET_TOOL): New.
From-SVN: r108059
2005-12-05 16:00:27 +01:00
:
else
MAKEINFO="$MISSING makeinfo"
fi
;;
changequote([,])
esac
# FIXME: expect and dejagnu may become build tools?
AC_CHECK_PROGS(EXPECT, expect, expect)
case " $configdirs " in
*" expect "*)
test $host = $build && EXPECT='$$r/$(HOST_SUBDIR)/expect/expect'
;;
esac
AC_CHECK_PROGS(RUNTEST, runtest, runtest)
case " $configdirs " in
*" dejagnu "*)
2006-09-27 21:42:24 +02:00
test $host = $build && RUNTEST='$$s/$(HOST_SUBDIR)/dejagnu/runtest'
configure.in (CONFIGURED_BISON, [...]): Remove "CONFIGURED_" from the AC_CHECK_PROGS invocation.
toplevel:
2005-12-05 Paolo Bonzini <bonzini@gnu.org>
* configure.in (CONFIGURED_BISON, CONFIGURED_YACC, CONFIGURED_M4,
CONFIGURED_FLEX, CONFIGURED_LEX, CONFIGURED_MAKEINFO): Remove
"CONFIGURED_" from the AC_CHECK_PROGS invocation. Move below.
Find in-tree tools if available.
(EXPECT, RUNTEST, LIPO, STRIP): Find them and substitute them.
(CONFIGURED_*_FOR_TARGET): Don't set nor substitute.
(*_FOR_TARGET): Set them with GCC_TARGET_TOOL.
(COMPILER_*_FOR_TARGET): New.
* Makefile.tpl (HOST_EXPORTS): Add *_FOR_TARGET symbols that gcc needs.
(BASE_TARGET_EXPORTS): Use COMPILER_*_FOR_TARGET symbols.
(CONFIGURED_*, USUAL_*): Remove.
(BISON, YACC, FLEX, LEX, M4, MAKEINFO, EXPECT, RUNTEST, LIPO,
STRIP): Use autoconf substitutions.
(COMPILER_AS_FOR_TARGET, COMPILER_LD_FOR_TARGET,
COMPILER_NM_FOR_TARGET): New.
(EXTRA_HOST_FLAGS): Pass LIPO and STRIP.
(all): Make all-host and all-target in parallel.
(do-[+make_target+], do-check, install, [+compare-target+]): Ensure
that $$r and $$s are set before invoking a recursive make.
(stage[+id+]-bubble): Likewise, and invoke the comparison at the end.
([+bootstrap-target+]): Inline most of the `all' target.
config:
2005-12-05 Paolo Bonzini <bonzini@gnu.org>
* acx.m4 (GCC_TARGET_TOOL): New.
From-SVN: r108059
2005-12-05 16:00:27 +01:00
;;
esac
configure.in: Convert to autoconf script.
(toplev)
* configure.in: Convert to autoconf script. Blow away lots
of now-redundant Makefile fragments.
* configure: Generate using Autoconf.
* Makefile.tpl: Rewrite to reflect autoconfiscation.
* Makefile.in: Regenerate.
(config)
* acx.m4: New.
* mh-a68bsd, mh-aix386, mh-apollo68, mh-delta88, mh-hp300,
mh-hpux, mh-hpux8, mh-irix5, mh-irix6, mh-ncrsvr43, mh-openedition,
mh-riscos, mh-sysv: Delete.
* mh-cxux, mh-dgux386, mh-interix, mh-lynxrs6k, mh-ncr3000,
mh-necv4, mh-sco, mh-solaris, mh-sysv4, mh-sysv5, mt-v810: Simplify.
From-SVN: r60558
2002-12-28 07:57:50 +01:00
# Host tools.
2005-08-12 16:18:46 +02:00
NCN_STRICT_CHECK_TOOLS(AR, ar)
NCN_STRICT_CHECK_TOOLS(AS, as)
NCN_STRICT_CHECK_TOOLS(DLLTOOL, dlltool)
NCN_STRICT_CHECK_TOOLS(LD, ld)
configure.in (CONFIGURED_BISON, [...]): Remove "CONFIGURED_" from the AC_CHECK_PROGS invocation.
toplevel:
2005-12-05 Paolo Bonzini <bonzini@gnu.org>
* configure.in (CONFIGURED_BISON, CONFIGURED_YACC, CONFIGURED_M4,
CONFIGURED_FLEX, CONFIGURED_LEX, CONFIGURED_MAKEINFO): Remove
"CONFIGURED_" from the AC_CHECK_PROGS invocation. Move below.
Find in-tree tools if available.
(EXPECT, RUNTEST, LIPO, STRIP): Find them and substitute them.
(CONFIGURED_*_FOR_TARGET): Don't set nor substitute.
(*_FOR_TARGET): Set them with GCC_TARGET_TOOL.
(COMPILER_*_FOR_TARGET): New.
* Makefile.tpl (HOST_EXPORTS): Add *_FOR_TARGET symbols that gcc needs.
(BASE_TARGET_EXPORTS): Use COMPILER_*_FOR_TARGET symbols.
(CONFIGURED_*, USUAL_*): Remove.
(BISON, YACC, FLEX, LEX, M4, MAKEINFO, EXPECT, RUNTEST, LIPO,
STRIP): Use autoconf substitutions.
(COMPILER_AS_FOR_TARGET, COMPILER_LD_FOR_TARGET,
COMPILER_NM_FOR_TARGET): New.
(EXTRA_HOST_FLAGS): Pass LIPO and STRIP.
(all): Make all-host and all-target in parallel.
(do-[+make_target+], do-check, install, [+compare-target+]): Ensure
that $$r and $$s are set before invoking a recursive make.
(stage[+id+]-bubble): Likewise, and invoke the comparison at the end.
([+bootstrap-target+]): Inline most of the `all' target.
config:
2005-12-05 Paolo Bonzini <bonzini@gnu.org>
* acx.m4 (GCC_TARGET_TOOL): New.
From-SVN: r108059
2005-12-05 16:00:27 +01:00
NCN_STRICT_CHECK_TOOLS(LIPO, lipo)
2005-08-12 16:18:46 +02:00
NCN_STRICT_CHECK_TOOLS(NM, nm)
2010-03-01 14:58:48 +01:00
NCN_STRICT_CHECK_TOOLS(RANLIB, ranlib, true)
NCN_STRICT_CHECK_TOOLS(STRIP, strip, true)
2005-08-12 16:18:46 +02:00
NCN_STRICT_CHECK_TOOLS(WINDRES, windres)
2007-07-02 10:19:12 +02:00
NCN_STRICT_CHECK_TOOLS(WINDMC, windmc)
2005-08-12 16:18:46 +02:00
NCN_STRICT_CHECK_TOOLS(OBJCOPY, objcopy)
NCN_STRICT_CHECK_TOOLS(OBJDUMP, objdump)
2011-11-09 19:57:26 +01:00
NCN_STRICT_CHECK_TOOLS(READELF, readelf)
configure.in: Convert to autoconf script.
(toplev)
* configure.in: Convert to autoconf script. Blow away lots
of now-redundant Makefile fragments.
* configure: Generate using Autoconf.
* Makefile.tpl: Rewrite to reflect autoconfiscation.
* Makefile.in: Regenerate.
(config)
* acx.m4: New.
* mh-a68bsd, mh-aix386, mh-apollo68, mh-delta88, mh-hp300,
mh-hpux, mh-hpux8, mh-irix5, mh-irix6, mh-ncrsvr43, mh-openedition,
mh-riscos, mh-sysv: Delete.
* mh-cxux, mh-dgux386, mh-interix, mh-lynxrs6k, mh-ncr3000,
mh-necv4, mh-sco, mh-solaris, mh-sysv4, mh-sysv5, mt-v810: Simplify.
From-SVN: r60558
2002-12-28 07:57:50 +01:00
AC_SUBST(CC)
AC_SUBST(CXX)
AC_SUBST(CFLAGS)
AC_SUBST(CXXFLAGS)
configure.in (CONFIGURED_BISON, [...]): Remove "CONFIGURED_" from the AC_CHECK_PROGS invocation.
toplevel:
2005-12-05 Paolo Bonzini <bonzini@gnu.org>
* configure.in (CONFIGURED_BISON, CONFIGURED_YACC, CONFIGURED_M4,
CONFIGURED_FLEX, CONFIGURED_LEX, CONFIGURED_MAKEINFO): Remove
"CONFIGURED_" from the AC_CHECK_PROGS invocation. Move below.
Find in-tree tools if available.
(EXPECT, RUNTEST, LIPO, STRIP): Find them and substitute them.
(CONFIGURED_*_FOR_TARGET): Don't set nor substitute.
(*_FOR_TARGET): Set them with GCC_TARGET_TOOL.
(COMPILER_*_FOR_TARGET): New.
* Makefile.tpl (HOST_EXPORTS): Add *_FOR_TARGET symbols that gcc needs.
(BASE_TARGET_EXPORTS): Use COMPILER_*_FOR_TARGET symbols.
(CONFIGURED_*, USUAL_*): Remove.
(BISON, YACC, FLEX, LEX, M4, MAKEINFO, EXPECT, RUNTEST, LIPO,
STRIP): Use autoconf substitutions.
(COMPILER_AS_FOR_TARGET, COMPILER_LD_FOR_TARGET,
COMPILER_NM_FOR_TARGET): New.
(EXTRA_HOST_FLAGS): Pass LIPO and STRIP.
(all): Make all-host and all-target in parallel.
(do-[+make_target+], do-check, install, [+compare-target+]): Ensure
that $$r and $$s are set before invoking a recursive make.
(stage[+id+]-bubble): Likewise, and invoke the comparison at the end.
([+bootstrap-target+]): Inline most of the `all' target.
config:
2005-12-05 Paolo Bonzini <bonzini@gnu.org>
* acx.m4 (GCC_TARGET_TOOL): New.
From-SVN: r108059
2005-12-05 16:00:27 +01:00
# Target tools.
2006-01-26 19:52:49 +01:00
AC_ARG_WITH([build-time-tools],
2011-01-21 14:18:23 +01:00
[AS_HELP_STRING([--with-build-time-tools=PATH],
[use given path to find target tools during the build])],
2006-01-26 19:52:49 +01:00
[case x"$withval" in
x/*) ;;
*)
with_build_time_tools=
AC_MSG_WARN([argument to --with-build-time-tools must be an absolute path])
;;
esac],
[with_build_time_tools=])
2005-08-12 16:18:46 +02:00
NCN_STRICT_CHECK_TARGET_TOOLS(CC_FOR_TARGET, cc gcc)
NCN_STRICT_CHECK_TARGET_TOOLS(CXX_FOR_TARGET, c++ g++ cxx gxx)
NCN_STRICT_CHECK_TARGET_TOOLS(GCC_FOR_TARGET, gcc, ${CC_FOR_TARGET})
NCN_STRICT_CHECK_TARGET_TOOLS(GFORTRAN_FOR_TARGET, gfortran)
2010-11-19 22:47:18 +01:00
NCN_STRICT_CHECK_TARGET_TOOLS(GOC_FOR_TARGET, gccgo)
2006-01-26 19:52:49 +01:00
ACX_CHECK_INSTALLED_TARGET_TOOL(AR_FOR_TARGET, ar)
ACX_CHECK_INSTALLED_TARGET_TOOL(AS_FOR_TARGET, as)
ACX_CHECK_INSTALLED_TARGET_TOOL(DLLTOOL_FOR_TARGET, dlltool)
ACX_CHECK_INSTALLED_TARGET_TOOL(LD_FOR_TARGET, ld)
ACX_CHECK_INSTALLED_TARGET_TOOL(LIPO_FOR_TARGET, lipo)
ACX_CHECK_INSTALLED_TARGET_TOOL(NM_FOR_TARGET, nm)
2015-01-03 23:50:48 +01:00
ACX_CHECK_INSTALLED_TARGET_TOOL(OBJCOPY_FOR_TARGET, objcopy)
2006-01-26 19:52:49 +01:00
ACX_CHECK_INSTALLED_TARGET_TOOL(OBJDUMP_FOR_TARGET, objdump)
2010-03-01 14:58:48 +01:00
ACX_CHECK_INSTALLED_TARGET_TOOL(RANLIB_FOR_TARGET, ranlib)
2011-11-09 19:57:26 +01:00
ACX_CHECK_INSTALLED_TARGET_TOOL(READELF_FOR_TARGET, readelf)
2006-01-26 19:52:49 +01:00
ACX_CHECK_INSTALLED_TARGET_TOOL(STRIP_FOR_TARGET, strip)
ACX_CHECK_INSTALLED_TARGET_TOOL(WINDRES_FOR_TARGET, windres)
2007-07-02 10:19:12 +02:00
ACX_CHECK_INSTALLED_TARGET_TOOL(WINDMC_FOR_TARGET, windmc)
configure.in (CC_FOR_TARGET, [...]): Find them with NCN_STRICT_CHECK_TARGET_TOOL, like the other target tools...
2005-08-08 Paolo Bonzini <bonzini@gnu.org>
* configure.in (CC_FOR_TARGET, CXX_FOR_TARGET, GCJ_FOR_TARGET,
GCC_FOR_TARGET, RAW_CXX_FOR_TARGET, GFORTRAN_FOR_TARGET): Find
them with NCN_STRICT_CHECK_TARGET_TOOL, like the other target
tools; remove code to manually set them.
(Target tools): Look in the environment for them.
* Makefile.tpl (CC_FOR_TARGET, CXX_FOR_TARGET, GCJ_FOR_TARGET,
GCC_FOR_TARGET, RAW_CXX_FOR_TARGET, GFORTRAN_FOR_TARGET): Redefine.
(AS_FOR_TARGET, LD_FOR_TARGET, NM_FOR_TARGET): Look into gcc
build directory.
(CONFIGURED_CC_FOR_TARGET, CONFIGURED_CXX_FOR_TARGET,
CONFIGURED_GCJ_FOR_TARGET, CONFIGURED_GCC_FOR_TARGET,
CONFIGURED_GFORTRAN_FOR_TARGET, USUAL_CC_FOR_TARGET,
USUAL_CXX_FOR_TARGET, USUAL_GCJ_FOR_TARGET, USUAL_GCC_FOR_TARGET,
USUAL_RAW_CXX_FOR_TARGET, USUAL_GFORTRAN_FOR_TARGET): New.
(CXX_FOR_TARGET_FOR_RECURSIVE_MAKE,
RAW_CXX_FOR_TARGET_FOR_RECURSIVE_MAKE, RECURSE_FLAGS): Delete.
* configure: Regenerate.
* Makefile.in: Regenerate.
From-SVN: r102855
2005-08-08 11:19:17 +02:00
configure.in (CONFIGURED_BISON, [...]): Remove "CONFIGURED_" from the AC_CHECK_PROGS invocation.
toplevel:
2005-12-05 Paolo Bonzini <bonzini@gnu.org>
* configure.in (CONFIGURED_BISON, CONFIGURED_YACC, CONFIGURED_M4,
CONFIGURED_FLEX, CONFIGURED_LEX, CONFIGURED_MAKEINFO): Remove
"CONFIGURED_" from the AC_CHECK_PROGS invocation. Move below.
Find in-tree tools if available.
(EXPECT, RUNTEST, LIPO, STRIP): Find them and substitute them.
(CONFIGURED_*_FOR_TARGET): Don't set nor substitute.
(*_FOR_TARGET): Set them with GCC_TARGET_TOOL.
(COMPILER_*_FOR_TARGET): New.
* Makefile.tpl (HOST_EXPORTS): Add *_FOR_TARGET symbols that gcc needs.
(BASE_TARGET_EXPORTS): Use COMPILER_*_FOR_TARGET symbols.
(CONFIGURED_*, USUAL_*): Remove.
(BISON, YACC, FLEX, LEX, M4, MAKEINFO, EXPECT, RUNTEST, LIPO,
STRIP): Use autoconf substitutions.
(COMPILER_AS_FOR_TARGET, COMPILER_LD_FOR_TARGET,
COMPILER_NM_FOR_TARGET): New.
(EXTRA_HOST_FLAGS): Pass LIPO and STRIP.
(all): Make all-host and all-target in parallel.
(do-[+make_target+], do-check, install, [+compare-target+]): Ensure
that $$r and $$s are set before invoking a recursive make.
(stage[+id+]-bubble): Likewise, and invoke the comparison at the end.
([+bootstrap-target+]): Inline most of the `all' target.
config:
2005-12-05 Paolo Bonzini <bonzini@gnu.org>
* acx.m4 (GCC_TARGET_TOOL): New.
From-SVN: r108059
2005-12-05 16:00:27 +01:00
RAW_CXX_FOR_TARGET="$CXX_FOR_TARGET"
GCC_TARGET_TOOL(ar, AR_FOR_TARGET, AR, [binutils/ar])
GCC_TARGET_TOOL(as, AS_FOR_TARGET, AS, [gas/as-new])
GCC_TARGET_TOOL(cc, CC_FOR_TARGET, CC, [gcc/xgcc -B$$r/$(HOST_SUBDIR)/gcc/])
2010-11-29 11:53:25 +01:00
dnl see comments for CXX_FOR_TARGET_FLAG_TO_PASS
configure.in (CONFIGURED_BISON, [...]): Remove "CONFIGURED_" from the AC_CHECK_PROGS invocation.
toplevel:
2005-12-05 Paolo Bonzini <bonzini@gnu.org>
* configure.in (CONFIGURED_BISON, CONFIGURED_YACC, CONFIGURED_M4,
CONFIGURED_FLEX, CONFIGURED_LEX, CONFIGURED_MAKEINFO): Remove
"CONFIGURED_" from the AC_CHECK_PROGS invocation. Move below.
Find in-tree tools if available.
(EXPECT, RUNTEST, LIPO, STRIP): Find them and substitute them.
(CONFIGURED_*_FOR_TARGET): Don't set nor substitute.
(*_FOR_TARGET): Set them with GCC_TARGET_TOOL.
(COMPILER_*_FOR_TARGET): New.
* Makefile.tpl (HOST_EXPORTS): Add *_FOR_TARGET symbols that gcc needs.
(BASE_TARGET_EXPORTS): Use COMPILER_*_FOR_TARGET symbols.
(CONFIGURED_*, USUAL_*): Remove.
(BISON, YACC, FLEX, LEX, M4, MAKEINFO, EXPECT, RUNTEST, LIPO,
STRIP): Use autoconf substitutions.
(COMPILER_AS_FOR_TARGET, COMPILER_LD_FOR_TARGET,
COMPILER_NM_FOR_TARGET): New.
(EXTRA_HOST_FLAGS): Pass LIPO and STRIP.
(all): Make all-host and all-target in parallel.
(do-[+make_target+], do-check, install, [+compare-target+]): Ensure
that $$r and $$s are set before invoking a recursive make.
(stage[+id+]-bubble): Likewise, and invoke the comparison at the end.
([+bootstrap-target+]): Inline most of the `all' target.
config:
2005-12-05 Paolo Bonzini <bonzini@gnu.org>
* acx.m4 (GCC_TARGET_TOOL): New.
From-SVN: r108059
2005-12-05 16:00:27 +01:00
GCC_TARGET_TOOL(c++, CXX_FOR_TARGET, CXX,
Commit the vtable verification feature.
Commit the vtable verification feature. This feature is designed to
detect, at run time, if/when the vtable pointer in a C++ object has
been corrupted, before allowing virtual calls through that pointer.
If pointer corruption is detected, execution of the program is halted.
libstdc++-v3 ChangeLog:
2013-08-06 Caroline Tice <cmtice@google.com>
* fragment.am: Add XTEMPLATE_FLAGS.
* configure.ac: Add definitions for --enable-vtable-verify.
* acinclude.m4: Add --enable-vtable-verify and
--disable-vtable-verify; define --enable-vtable-verify; define
VTV_CXXFLAGS, VTV_PCH_CXXFLAGS and VTV_CXXLINKFLAGS.
* config/abi/pre/gnu.ver: Export symbols for vtable verification.
* libsupc++/Makefile.am: Define vtv_sources and add it to
libsupc___la_SOURCES and libsupc__convenience_la_SOURCES.
* libsupc++/vtv_stubs.cc: New file.
* include/Makefile.am: Add VTV_PCH_CXXFLAGS to PCHFLAGS.
* src/Makefile.am: Add VTV_CXXFLAGS to AM_CXXFLAGS; add
VTV_CXXLINKFLAGS to CXXLINK.
* src/c++98/Makefile.am: Comment out XTEMPLATE_FLAGS; add VTV_CXXFLAGS
to AM_CXXFLAGS; add VTV_CXXXLINKFLAGS to CXXLINK.
* src/C++11/Makefile.am: Ditto.
* doc/xml/manual/configure.xml: Add entry for --enable-vtable-verify.
* scripts/testsuite_flags.in: Add cxxvtvflags to Usage; cause
cxxvtvflags to use VTV_CXXFLAGS and VTV_CXXLINKFLAGS.
* testsuite/lib/libstdc++.exp: Add cxxvtvflags; add code to locate
libvtv if --enable-vtable-verify was used; set cxxvtvflags; add
cxxvtvflags to cxx_final.
* testsuite/18_support/bad_exception/23591_thread-1.c: Add
-fvtable-verify=none to compiler flags.
* testsuite/17_intro/freestanding.cc: Add -fvtable-verify=none
to compiler flags.
* configure: Regenerated.
* Makefile.in: Regenerated.
* python/Makefile.in: Regenerated.
* include/Makefile.in: Regenerated.
* libsupc++/Makefile.in: Regenerated.
* config.h.in: Regenerated.
* po/Makefile.in: Regenerated.
* src/Makefile.in: Regenerated.
* src/c++98/Makefile.in: Regenerated.
* src/c++11/Makefile.in: Regenerated.
* doc/Makefile.in: Regenerated.
* testsuite/Makefile.in: Regenerated.
top level ChangeLog:
2013-08-06 Caroline Tice <cmtice@google.com>
* configure.ac: Add target-libvtv to target_libraries; disable libvtv
on non-linux systems; add target-libvtv to noconfigdirs; add
libsupc++/.libs to C++ library search paths.
* configure: Regenerated.
* Makefile.def: Add libvtv to target_modules; make libvtv depend on
libstdc++ and libgcc.
* Makefile.in: Regenerated.
include/ChangeLog:
2013-08-06 Caroline Tice <cmtice@google.com>
* vtv-change-permission.h: New file.
contrib/ChangeLog:
2013-08-06 Caroline Tice4 <cmtice@google.com>
* gcc_update: Add libvtv files.
libgcc/ChangeLog:
2013-08-06 Caroline Tice <cmtice@google.com>
config.host (extra_parts): Add vtv_start.o, vtv_end.o
vtv_start_preinit.o and vtv_end_preinit.o.
configure.ac: Add code to check/set enable_vtable_verify.
Makefile.in: Add rules to build vtv_*.o, if enable_vtable_verify is
true.
vtv_start_preinit.c: New file.
vtv_end_preinit.c: New file.
vtv_start.c: New file.
vtv_end.c: New file.
configure: Regenerated.
gcc/ChangeLog:
2013-08-06 Caroline Tice <cmtice@google.com>
* gcc.c (VTABLE_VERIFICATION_SPEC): New definition.
(LINK_COMMAND_SPEC): Add VTABLE_VERIFICATION_SPEC.
* tree-pass.h: Add pass_vtable_verify.
* varasm.c (assemble_variable): Add code to properly set the comdat
section and name for the .vtable_map_vars section.
(assemble_vtyv_preinit_initializer): New function.
(default_sectin_type_flags): Make sure .vtable_map_vars section has
LINK_ONCE flag.
* output.h: Add function decl for assemble_vtv_preinit_initializer.
* vtable-verify.c: New file.
* vtable-verify.h: New file.
* flag-types.h (enum vtv_priority): Defintions for flag_vtable_verify
initialiation levels.
* timevar.def (TV_VTABLE_VERIFICATION): New definition.
* passes.def: Insert pass_vtable_verify.
* aclocal.m4: Reorder includes.
* doc/invoke.texi: Add documentation for the flags -fvtable-verify=,
-fvtv-debug and -fvtv-counts.
* config/gnu-user.h (GNU_USER_TARGET_STARTFILE_SPEC): Add vtv_start*.o,
as appropriate, if -fvtable-verify=... is used.
(GNU_USER_TARGET_ENDFILE_SPEC): Add vtv_end*.o as appropriate, if
-fvtable-verify=... is used.
* Makefile.in (OBJS): Add vtable-verify.o to list.
(vtable-verify.o): Add new build rule.
(GTFILES): Add vtable-verify.c to list.
* common.opt (fvtable-verify=): New flag.
(vtv_priority): Values for fvtable-verify= flag.
(fvtv-counts): New flag.
(fvtv-debug): New flag.
* tree.h (save_vtable_map_decl): New extern function decl.
gcc/cp/ChangeLog:
2013-08-06 Caroline Tice <cmtice@google.com>
* Make-lang.in (*CXX_AND_OBJCXX_OBJS): Add vtable-class-hierarchy.o to
list.
(vtable-class-hierarchy.o): Add build rule.
* cp-tree.h (vtv_start_verification_constructor_init_function): New
extern function decl.
(vtv_finish_verification_constructor_init_function): New extern
function decl.
(build_vtbl_address): New extern function decl.
(get_mangled_vtable_map_var_name): New extern function decl.
(vtv_compute_class_hierarchy_transitive_closure): New extern function
decl.
(vtv_generate_init_routine): New extern function decl.
(vtv_save_class_info): New extern function decl.
(vtv_recover_class_info): New extern function decl.
(vtv_build_vtable_verify_fndecl): New extern function decl.
* class.c (finish_struct_1): Add call to vtv_save_class_info if
flag_vtable_verify is true.
* config-lang.in: Add vtable-class-hierarchy.c to gtfiles list.
* vtable-class-hierarchy.c: New file.
* mangle.c (get_mangled_vtable_map_var_name): New function.
* decl2.c (start_objects): Update function comment.
(cp_write_global_declarations): Call vtv_recover_class_info,
vtv_compute_class_hierarchy_transitive_closure and
vtv_build_vtable_verify_fndecl, before calling
finalize_compilation_unit, and call vtv_generate_init_rount after, IFF
flag_vtable_verify is true.
(vtv_start_verification_constructor_init_function): New function.
(vtv_finish_verification_constructor_init_function): New function.
* init.c (build_vtbl_address): Remove static qualifier from function.
libvtv/ChangeLog:
2013-08-06 Caroline Tice <cmtice@google.com>
Initial check-in of new vtable verification feature.
* configure.ac : New file.
* acinclude.m4 : New file.
* Makefile.am : New file.
* aclocal.m4 : New file.
* configure.tgt : New file.
* configure: New file (generated).
* Makefile.in: New file (generated).
* vtv_set.h : New file.
* vtv_utils.cc : New file.
* vtv_utils.h : New file.
* vtv_malloc.cc : New file.
* vtv_rts.cc : New file.
* vtv_malloc.h : New file.
* vtv_rts.h : New file.
* vtv_fail.cc : New file.
* vtv_fail.h : New file.
* vtv_map.h : New file.
* scripts/run-testsuite.sh : New file.
* scripts/sum-vtv-counts.c : New file.
* testsuite/parts-test-main.h : New file.
* testusite/dataentry.cc : New file.
* testsuite/temp_deriv.cc : New file.
* testsuite/register_pair.cc : New file.
* testsuite/virtual_inheritance.cc : New file.
* testsuite/field-test.cc : New file.
* testsuite/nested_vcall_test.cc : New file.
* testsuite/template-list-iostream.cc : New file.
* testsuite/register_pair_inserts.cc : New file.
* testsuite/register_pair_inserts_mt.cc : New file.
* testsuite/event.list : New file.
* testsuite/parts-test-extra-parts-views.cc : New file.
* testsuite/parts-test-extra-parts-views.h : New file.
* testsuite/environment-fail-32.s : New file.
* testsuite/parts-test-extra-parts.h : New file.
* testsuite/temp_deriv2.cc : New file.
* testsuite/dlopen_mt.cc : New file.
* testsuite/event.h : New file.
* testsuite/template-list.cc : New file.
* testsuite/replace-fail.cc : New file.
* testsuite/Makefile.am : New file.
* testsuite/Makefile.in: New file (generated).
* testsuite/mempool_negative.c : New file.
* testsuite/parts-test-main.cc : New file.
* testsuite/event-private.cc : New file.
* testsuite/thunk.cc : New file.
* testsuite/event-defintiions.cc : New file.
* testsuite/event-private.h : New file.
* testsuite/parts-test.list : New file.
* testusite/register_pair_mt.cc : New file.
* testsuite/povray-derived.cc : New file.
* testsuite/event-main.cc : New file.
* testsuite/environment.cc : New file.
* testsuite/template-list2.cc : New file.
* testsuite/thunk_vtable_map_attack.cc : New file.
* testsuite/parts-test-extra-parts.cc : New file.
* testsuite/environment-fail-64.s : New file.
* testsuite/dlopen.cc : New file.
* testsuite/so.cc : New file.
* testsuite/temp_deriv3.cc : New file.
* testsuite/const_vtable.cc : New file.
* testsuite/mempool_positive.c : New file.
* testsuite/dup_name.cc : New file.
From-SVN: r201555
2013-08-07 05:38:59 +02:00
[gcc/xg++ -B$$r/$(HOST_SUBDIR)/gcc/ -nostdinc++ `if test -f $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags; then $(SHELL) $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags --build-includes; else echo -funconfigured-libstdc++-v3 ; fi` -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/libsupc++/.libs],
configure.in (CONFIGURED_BISON, [...]): Remove "CONFIGURED_" from the AC_CHECK_PROGS invocation.
toplevel:
2005-12-05 Paolo Bonzini <bonzini@gnu.org>
* configure.in (CONFIGURED_BISON, CONFIGURED_YACC, CONFIGURED_M4,
CONFIGURED_FLEX, CONFIGURED_LEX, CONFIGURED_MAKEINFO): Remove
"CONFIGURED_" from the AC_CHECK_PROGS invocation. Move below.
Find in-tree tools if available.
(EXPECT, RUNTEST, LIPO, STRIP): Find them and substitute them.
(CONFIGURED_*_FOR_TARGET): Don't set nor substitute.
(*_FOR_TARGET): Set them with GCC_TARGET_TOOL.
(COMPILER_*_FOR_TARGET): New.
* Makefile.tpl (HOST_EXPORTS): Add *_FOR_TARGET symbols that gcc needs.
(BASE_TARGET_EXPORTS): Use COMPILER_*_FOR_TARGET symbols.
(CONFIGURED_*, USUAL_*): Remove.
(BISON, YACC, FLEX, LEX, M4, MAKEINFO, EXPECT, RUNTEST, LIPO,
STRIP): Use autoconf substitutions.
(COMPILER_AS_FOR_TARGET, COMPILER_LD_FOR_TARGET,
COMPILER_NM_FOR_TARGET): New.
(EXTRA_HOST_FLAGS): Pass LIPO and STRIP.
(all): Make all-host and all-target in parallel.
(do-[+make_target+], do-check, install, [+compare-target+]): Ensure
that $$r and $$s are set before invoking a recursive make.
(stage[+id+]-bubble): Likewise, and invoke the comparison at the end.
([+bootstrap-target+]): Inline most of the `all' target.
config:
2005-12-05 Paolo Bonzini <bonzini@gnu.org>
* acx.m4 (GCC_TARGET_TOOL): New.
From-SVN: r108059
2005-12-05 16:00:27 +01:00
c++)
GCC_TARGET_TOOL(c++ for libstdc++, RAW_CXX_FOR_TARGET, CXX,
Commit the vtable verification feature.
Commit the vtable verification feature. This feature is designed to
detect, at run time, if/when the vtable pointer in a C++ object has
been corrupted, before allowing virtual calls through that pointer.
If pointer corruption is detected, execution of the program is halted.
libstdc++-v3 ChangeLog:
2013-08-06 Caroline Tice <cmtice@google.com>
* fragment.am: Add XTEMPLATE_FLAGS.
* configure.ac: Add definitions for --enable-vtable-verify.
* acinclude.m4: Add --enable-vtable-verify and
--disable-vtable-verify; define --enable-vtable-verify; define
VTV_CXXFLAGS, VTV_PCH_CXXFLAGS and VTV_CXXLINKFLAGS.
* config/abi/pre/gnu.ver: Export symbols for vtable verification.
* libsupc++/Makefile.am: Define vtv_sources and add it to
libsupc___la_SOURCES and libsupc__convenience_la_SOURCES.
* libsupc++/vtv_stubs.cc: New file.
* include/Makefile.am: Add VTV_PCH_CXXFLAGS to PCHFLAGS.
* src/Makefile.am: Add VTV_CXXFLAGS to AM_CXXFLAGS; add
VTV_CXXLINKFLAGS to CXXLINK.
* src/c++98/Makefile.am: Comment out XTEMPLATE_FLAGS; add VTV_CXXFLAGS
to AM_CXXFLAGS; add VTV_CXXXLINKFLAGS to CXXLINK.
* src/C++11/Makefile.am: Ditto.
* doc/xml/manual/configure.xml: Add entry for --enable-vtable-verify.
* scripts/testsuite_flags.in: Add cxxvtvflags to Usage; cause
cxxvtvflags to use VTV_CXXFLAGS and VTV_CXXLINKFLAGS.
* testsuite/lib/libstdc++.exp: Add cxxvtvflags; add code to locate
libvtv if --enable-vtable-verify was used; set cxxvtvflags; add
cxxvtvflags to cxx_final.
* testsuite/18_support/bad_exception/23591_thread-1.c: Add
-fvtable-verify=none to compiler flags.
* testsuite/17_intro/freestanding.cc: Add -fvtable-verify=none
to compiler flags.
* configure: Regenerated.
* Makefile.in: Regenerated.
* python/Makefile.in: Regenerated.
* include/Makefile.in: Regenerated.
* libsupc++/Makefile.in: Regenerated.
* config.h.in: Regenerated.
* po/Makefile.in: Regenerated.
* src/Makefile.in: Regenerated.
* src/c++98/Makefile.in: Regenerated.
* src/c++11/Makefile.in: Regenerated.
* doc/Makefile.in: Regenerated.
* testsuite/Makefile.in: Regenerated.
top level ChangeLog:
2013-08-06 Caroline Tice <cmtice@google.com>
* configure.ac: Add target-libvtv to target_libraries; disable libvtv
on non-linux systems; add target-libvtv to noconfigdirs; add
libsupc++/.libs to C++ library search paths.
* configure: Regenerated.
* Makefile.def: Add libvtv to target_modules; make libvtv depend on
libstdc++ and libgcc.
* Makefile.in: Regenerated.
include/ChangeLog:
2013-08-06 Caroline Tice <cmtice@google.com>
* vtv-change-permission.h: New file.
contrib/ChangeLog:
2013-08-06 Caroline Tice4 <cmtice@google.com>
* gcc_update: Add libvtv files.
libgcc/ChangeLog:
2013-08-06 Caroline Tice <cmtice@google.com>
config.host (extra_parts): Add vtv_start.o, vtv_end.o
vtv_start_preinit.o and vtv_end_preinit.o.
configure.ac: Add code to check/set enable_vtable_verify.
Makefile.in: Add rules to build vtv_*.o, if enable_vtable_verify is
true.
vtv_start_preinit.c: New file.
vtv_end_preinit.c: New file.
vtv_start.c: New file.
vtv_end.c: New file.
configure: Regenerated.
gcc/ChangeLog:
2013-08-06 Caroline Tice <cmtice@google.com>
* gcc.c (VTABLE_VERIFICATION_SPEC): New definition.
(LINK_COMMAND_SPEC): Add VTABLE_VERIFICATION_SPEC.
* tree-pass.h: Add pass_vtable_verify.
* varasm.c (assemble_variable): Add code to properly set the comdat
section and name for the .vtable_map_vars section.
(assemble_vtyv_preinit_initializer): New function.
(default_sectin_type_flags): Make sure .vtable_map_vars section has
LINK_ONCE flag.
* output.h: Add function decl for assemble_vtv_preinit_initializer.
* vtable-verify.c: New file.
* vtable-verify.h: New file.
* flag-types.h (enum vtv_priority): Defintions for flag_vtable_verify
initialiation levels.
* timevar.def (TV_VTABLE_VERIFICATION): New definition.
* passes.def: Insert pass_vtable_verify.
* aclocal.m4: Reorder includes.
* doc/invoke.texi: Add documentation for the flags -fvtable-verify=,
-fvtv-debug and -fvtv-counts.
* config/gnu-user.h (GNU_USER_TARGET_STARTFILE_SPEC): Add vtv_start*.o,
as appropriate, if -fvtable-verify=... is used.
(GNU_USER_TARGET_ENDFILE_SPEC): Add vtv_end*.o as appropriate, if
-fvtable-verify=... is used.
* Makefile.in (OBJS): Add vtable-verify.o to list.
(vtable-verify.o): Add new build rule.
(GTFILES): Add vtable-verify.c to list.
* common.opt (fvtable-verify=): New flag.
(vtv_priority): Values for fvtable-verify= flag.
(fvtv-counts): New flag.
(fvtv-debug): New flag.
* tree.h (save_vtable_map_decl): New extern function decl.
gcc/cp/ChangeLog:
2013-08-06 Caroline Tice <cmtice@google.com>
* Make-lang.in (*CXX_AND_OBJCXX_OBJS): Add vtable-class-hierarchy.o to
list.
(vtable-class-hierarchy.o): Add build rule.
* cp-tree.h (vtv_start_verification_constructor_init_function): New
extern function decl.
(vtv_finish_verification_constructor_init_function): New extern
function decl.
(build_vtbl_address): New extern function decl.
(get_mangled_vtable_map_var_name): New extern function decl.
(vtv_compute_class_hierarchy_transitive_closure): New extern function
decl.
(vtv_generate_init_routine): New extern function decl.
(vtv_save_class_info): New extern function decl.
(vtv_recover_class_info): New extern function decl.
(vtv_build_vtable_verify_fndecl): New extern function decl.
* class.c (finish_struct_1): Add call to vtv_save_class_info if
flag_vtable_verify is true.
* config-lang.in: Add vtable-class-hierarchy.c to gtfiles list.
* vtable-class-hierarchy.c: New file.
* mangle.c (get_mangled_vtable_map_var_name): New function.
* decl2.c (start_objects): Update function comment.
(cp_write_global_declarations): Call vtv_recover_class_info,
vtv_compute_class_hierarchy_transitive_closure and
vtv_build_vtable_verify_fndecl, before calling
finalize_compilation_unit, and call vtv_generate_init_rount after, IFF
flag_vtable_verify is true.
(vtv_start_verification_constructor_init_function): New function.
(vtv_finish_verification_constructor_init_function): New function.
* init.c (build_vtbl_address): Remove static qualifier from function.
libvtv/ChangeLog:
2013-08-06 Caroline Tice <cmtice@google.com>
Initial check-in of new vtable verification feature.
* configure.ac : New file.
* acinclude.m4 : New file.
* Makefile.am : New file.
* aclocal.m4 : New file.
* configure.tgt : New file.
* configure: New file (generated).
* Makefile.in: New file (generated).
* vtv_set.h : New file.
* vtv_utils.cc : New file.
* vtv_utils.h : New file.
* vtv_malloc.cc : New file.
* vtv_rts.cc : New file.
* vtv_malloc.h : New file.
* vtv_rts.h : New file.
* vtv_fail.cc : New file.
* vtv_fail.h : New file.
* vtv_map.h : New file.
* scripts/run-testsuite.sh : New file.
* scripts/sum-vtv-counts.c : New file.
* testsuite/parts-test-main.h : New file.
* testusite/dataentry.cc : New file.
* testsuite/temp_deriv.cc : New file.
* testsuite/register_pair.cc : New file.
* testsuite/virtual_inheritance.cc : New file.
* testsuite/field-test.cc : New file.
* testsuite/nested_vcall_test.cc : New file.
* testsuite/template-list-iostream.cc : New file.
* testsuite/register_pair_inserts.cc : New file.
* testsuite/register_pair_inserts_mt.cc : New file.
* testsuite/event.list : New file.
* testsuite/parts-test-extra-parts-views.cc : New file.
* testsuite/parts-test-extra-parts-views.h : New file.
* testsuite/environment-fail-32.s : New file.
* testsuite/parts-test-extra-parts.h : New file.
* testsuite/temp_deriv2.cc : New file.
* testsuite/dlopen_mt.cc : New file.
* testsuite/event.h : New file.
* testsuite/template-list.cc : New file.
* testsuite/replace-fail.cc : New file.
* testsuite/Makefile.am : New file.
* testsuite/Makefile.in: New file (generated).
* testsuite/mempool_negative.c : New file.
* testsuite/parts-test-main.cc : New file.
* testsuite/event-private.cc : New file.
* testsuite/thunk.cc : New file.
* testsuite/event-defintiions.cc : New file.
* testsuite/event-private.h : New file.
* testsuite/parts-test.list : New file.
* testusite/register_pair_mt.cc : New file.
* testsuite/povray-derived.cc : New file.
* testsuite/event-main.cc : New file.
* testsuite/environment.cc : New file.
* testsuite/template-list2.cc : New file.
* testsuite/thunk_vtable_map_attack.cc : New file.
* testsuite/parts-test-extra-parts.cc : New file.
* testsuite/environment-fail-64.s : New file.
* testsuite/dlopen.cc : New file.
* testsuite/so.cc : New file.
* testsuite/temp_deriv3.cc : New file.
* testsuite/const_vtable.cc : New file.
* testsuite/mempool_positive.c : New file.
* testsuite/dup_name.cc : New file.
From-SVN: r201555
2013-08-07 05:38:59 +02:00
[gcc/xgcc -shared-libgcc -B$$r/$(HOST_SUBDIR)/gcc -nostdinc++ -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/libsupc++/.libs],
configure.in (CONFIGURED_BISON, [...]): Remove "CONFIGURED_" from the AC_CHECK_PROGS invocation.
toplevel:
2005-12-05 Paolo Bonzini <bonzini@gnu.org>
* configure.in (CONFIGURED_BISON, CONFIGURED_YACC, CONFIGURED_M4,
CONFIGURED_FLEX, CONFIGURED_LEX, CONFIGURED_MAKEINFO): Remove
"CONFIGURED_" from the AC_CHECK_PROGS invocation. Move below.
Find in-tree tools if available.
(EXPECT, RUNTEST, LIPO, STRIP): Find them and substitute them.
(CONFIGURED_*_FOR_TARGET): Don't set nor substitute.
(*_FOR_TARGET): Set them with GCC_TARGET_TOOL.
(COMPILER_*_FOR_TARGET): New.
* Makefile.tpl (HOST_EXPORTS): Add *_FOR_TARGET symbols that gcc needs.
(BASE_TARGET_EXPORTS): Use COMPILER_*_FOR_TARGET symbols.
(CONFIGURED_*, USUAL_*): Remove.
(BISON, YACC, FLEX, LEX, M4, MAKEINFO, EXPECT, RUNTEST, LIPO,
STRIP): Use autoconf substitutions.
(COMPILER_AS_FOR_TARGET, COMPILER_LD_FOR_TARGET,
COMPILER_NM_FOR_TARGET): New.
(EXTRA_HOST_FLAGS): Pass LIPO and STRIP.
(all): Make all-host and all-target in parallel.
(do-[+make_target+], do-check, install, [+compare-target+]): Ensure
that $$r and $$s are set before invoking a recursive make.
(stage[+id+]-bubble): Likewise, and invoke the comparison at the end.
([+bootstrap-target+]): Inline most of the `all' target.
config:
2005-12-05 Paolo Bonzini <bonzini@gnu.org>
* acx.m4 (GCC_TARGET_TOOL): New.
From-SVN: r108059
2005-12-05 16:00:27 +01:00
c++)
GCC_TARGET_TOOL(dlltool, DLLTOOL_FOR_TARGET, DLLTOOL, [binutils/dlltool])
GCC_TARGET_TOOL(gcc, GCC_FOR_TARGET, , [gcc/xgcc -B$$r/$(HOST_SUBDIR)/gcc/])
GCC_TARGET_TOOL(gfortran, GFORTRAN_FOR_TARGET, GFORTRAN,
[gcc/gfortran -B$$r/$(HOST_SUBDIR)/gcc/], fortran)
2010-11-19 22:47:18 +01:00
GCC_TARGET_TOOL(gccgo, GOC_FOR_TARGET, GOC,
[gcc/gccgo -B$$r/$(HOST_SUBDIR)/gcc/], go)
configure.in (CONFIGURED_BISON, [...]): Remove "CONFIGURED_" from the AC_CHECK_PROGS invocation.
toplevel:
2005-12-05 Paolo Bonzini <bonzini@gnu.org>
* configure.in (CONFIGURED_BISON, CONFIGURED_YACC, CONFIGURED_M4,
CONFIGURED_FLEX, CONFIGURED_LEX, CONFIGURED_MAKEINFO): Remove
"CONFIGURED_" from the AC_CHECK_PROGS invocation. Move below.
Find in-tree tools if available.
(EXPECT, RUNTEST, LIPO, STRIP): Find them and substitute them.
(CONFIGURED_*_FOR_TARGET): Don't set nor substitute.
(*_FOR_TARGET): Set them with GCC_TARGET_TOOL.
(COMPILER_*_FOR_TARGET): New.
* Makefile.tpl (HOST_EXPORTS): Add *_FOR_TARGET symbols that gcc needs.
(BASE_TARGET_EXPORTS): Use COMPILER_*_FOR_TARGET symbols.
(CONFIGURED_*, USUAL_*): Remove.
(BISON, YACC, FLEX, LEX, M4, MAKEINFO, EXPECT, RUNTEST, LIPO,
STRIP): Use autoconf substitutions.
(COMPILER_AS_FOR_TARGET, COMPILER_LD_FOR_TARGET,
COMPILER_NM_FOR_TARGET): New.
(EXTRA_HOST_FLAGS): Pass LIPO and STRIP.
(all): Make all-host and all-target in parallel.
(do-[+make_target+], do-check, install, [+compare-target+]): Ensure
that $$r and $$s are set before invoking a recursive make.
(stage[+id+]-bubble): Likewise, and invoke the comparison at the end.
([+bootstrap-target+]): Inline most of the `all' target.
config:
2005-12-05 Paolo Bonzini <bonzini@gnu.org>
* acx.m4 (GCC_TARGET_TOOL): New.
From-SVN: r108059
2005-12-05 16:00:27 +01:00
GCC_TARGET_TOOL(ld, LD_FOR_TARGET, LD, [ld/ld-new])
GCC_TARGET_TOOL(lipo, LIPO_FOR_TARGET, LIPO)
GCC_TARGET_TOOL(nm, NM_FOR_TARGET, NM, [binutils/nm-new])
2015-01-04 11:31:30 +01:00
GCC_TARGET_TOOL(objcopy, OBJCOPY_FOR_TARGET, OBJCOPY, [binutils/objcopy])
configure.in (CONFIGURED_BISON, [...]): Remove "CONFIGURED_" from the AC_CHECK_PROGS invocation.
toplevel:
2005-12-05 Paolo Bonzini <bonzini@gnu.org>
* configure.in (CONFIGURED_BISON, CONFIGURED_YACC, CONFIGURED_M4,
CONFIGURED_FLEX, CONFIGURED_LEX, CONFIGURED_MAKEINFO): Remove
"CONFIGURED_" from the AC_CHECK_PROGS invocation. Move below.
Find in-tree tools if available.
(EXPECT, RUNTEST, LIPO, STRIP): Find them and substitute them.
(CONFIGURED_*_FOR_TARGET): Don't set nor substitute.
(*_FOR_TARGET): Set them with GCC_TARGET_TOOL.
(COMPILER_*_FOR_TARGET): New.
* Makefile.tpl (HOST_EXPORTS): Add *_FOR_TARGET symbols that gcc needs.
(BASE_TARGET_EXPORTS): Use COMPILER_*_FOR_TARGET symbols.
(CONFIGURED_*, USUAL_*): Remove.
(BISON, YACC, FLEX, LEX, M4, MAKEINFO, EXPECT, RUNTEST, LIPO,
STRIP): Use autoconf substitutions.
(COMPILER_AS_FOR_TARGET, COMPILER_LD_FOR_TARGET,
COMPILER_NM_FOR_TARGET): New.
(EXTRA_HOST_FLAGS): Pass LIPO and STRIP.
(all): Make all-host and all-target in parallel.
(do-[+make_target+], do-check, install, [+compare-target+]): Ensure
that $$r and $$s are set before invoking a recursive make.
(stage[+id+]-bubble): Likewise, and invoke the comparison at the end.
([+bootstrap-target+]): Inline most of the `all' target.
config:
2005-12-05 Paolo Bonzini <bonzini@gnu.org>
* acx.m4 (GCC_TARGET_TOOL): New.
From-SVN: r108059
2005-12-05 16:00:27 +01:00
GCC_TARGET_TOOL(objdump, OBJDUMP_FOR_TARGET, OBJDUMP, [binutils/objdump])
GCC_TARGET_TOOL(ranlib, RANLIB_FOR_TARGET, RANLIB, [binutils/ranlib])
2011-11-09 19:57:26 +01:00
GCC_TARGET_TOOL(readelf, READELF_FOR_TARGET, READELF, [binutils/readelf])
PR other/46202: implement install-strip.
/:
PR other/46202
* configure.ac: Fix just-built in-tree STRIP name to be
binutils/strip-new.
* configure: Regenerate.
* Makefile.def (install-strip-gcc, install-strip-binutils)
(install-strip-opcodes, install-strip-ld, install-strip-itcl)
(install-strip-sid): Mirror dependencies on non-strip variants
of these targets on the respective -strip prerequisites.
* Makefile.tpl (install-strip, install-strip-host)
(install-strip-target): New targets.
(install-strip-[+module+], install-strip-target-[+module+]):
New targets.
* Makefile.in: Regenerate.
gcc/:
PR other/46202
* Makefile.in (install_sh, INSTALL_STRIP_PROGRAM): New
variables.
(AR_FOR_TARGET, RANLIB_FOR_TARGET, STRIP_FOR_TARGET): Fix
shell quoting.
(STRIP_FOR_TARGET): Look for in-tree strip under name strip-new.
(install-strip): New target.
(STRIPPROG): New variable, exported if STRIP is set.
* doc/install.texi (Final install): Minor markup and code style
fixes. Document install-strip target.
fixincludes/:
PR other/46202
* Makefile.in (install-strip): New phony target.
(all, check, install): Also mark as phony.
libgcc/:
PR other/46202
* Makefile.in (install-strip): New phony target.
libiberty/:
PR other/46202
* Makefile.in (install-strip): New phony target.
(install): Also mark as phony.
gnattools/:
PR other/46202
* Makefile.in (install-strip): New phony target.
(check, installcheck, info, dvi, pdf, html, install)
(install-info, install-pdf, install-html, mostlyclean)
(clean, distclean, maintainer-clean): Mark phony.
libada/:
PR other/46202
* Makefile.in (install-strip): New phony target.
(check, installcheck, info, dvi, pdf, html, install)
(install-info, install-pdf, install-html, mostlyclean)
(clean, distclean, maintainer-clean): Mark phony.
From-SVN: r166980
2010-11-20 20:37:08 +01:00
GCC_TARGET_TOOL(strip, STRIP_FOR_TARGET, STRIP, [binutils/strip-new])
configure.in (CONFIGURED_BISON, [...]): Remove "CONFIGURED_" from the AC_CHECK_PROGS invocation.
toplevel:
2005-12-05 Paolo Bonzini <bonzini@gnu.org>
* configure.in (CONFIGURED_BISON, CONFIGURED_YACC, CONFIGURED_M4,
CONFIGURED_FLEX, CONFIGURED_LEX, CONFIGURED_MAKEINFO): Remove
"CONFIGURED_" from the AC_CHECK_PROGS invocation. Move below.
Find in-tree tools if available.
(EXPECT, RUNTEST, LIPO, STRIP): Find them and substitute them.
(CONFIGURED_*_FOR_TARGET): Don't set nor substitute.
(*_FOR_TARGET): Set them with GCC_TARGET_TOOL.
(COMPILER_*_FOR_TARGET): New.
* Makefile.tpl (HOST_EXPORTS): Add *_FOR_TARGET symbols that gcc needs.
(BASE_TARGET_EXPORTS): Use COMPILER_*_FOR_TARGET symbols.
(CONFIGURED_*, USUAL_*): Remove.
(BISON, YACC, FLEX, LEX, M4, MAKEINFO, EXPECT, RUNTEST, LIPO,
STRIP): Use autoconf substitutions.
(COMPILER_AS_FOR_TARGET, COMPILER_LD_FOR_TARGET,
COMPILER_NM_FOR_TARGET): New.
(EXTRA_HOST_FLAGS): Pass LIPO and STRIP.
(all): Make all-host and all-target in parallel.
(do-[+make_target+], do-check, install, [+compare-target+]): Ensure
that $$r and $$s are set before invoking a recursive make.
(stage[+id+]-bubble): Likewise, and invoke the comparison at the end.
([+bootstrap-target+]): Inline most of the `all' target.
config:
2005-12-05 Paolo Bonzini <bonzini@gnu.org>
* acx.m4 (GCC_TARGET_TOOL): New.
From-SVN: r108059
2005-12-05 16:00:27 +01:00
GCC_TARGET_TOOL(windres, WINDRES_FOR_TARGET, WINDRES, [binutils/windres])
2007-07-02 10:19:12 +02:00
GCC_TARGET_TOOL(windmc, WINDMC_FOR_TARGET, WINDMC, [binutils/windmc])
configure.in (CC_FOR_TARGET, [...]): Find them with NCN_STRICT_CHECK_TARGET_TOOL, like the other target tools...
2005-08-08 Paolo Bonzini <bonzini@gnu.org>
* configure.in (CC_FOR_TARGET, CXX_FOR_TARGET, GCJ_FOR_TARGET,
GCC_FOR_TARGET, RAW_CXX_FOR_TARGET, GFORTRAN_FOR_TARGET): Find
them with NCN_STRICT_CHECK_TARGET_TOOL, like the other target
tools; remove code to manually set them.
(Target tools): Look in the environment for them.
* Makefile.tpl (CC_FOR_TARGET, CXX_FOR_TARGET, GCJ_FOR_TARGET,
GCC_FOR_TARGET, RAW_CXX_FOR_TARGET, GFORTRAN_FOR_TARGET): Redefine.
(AS_FOR_TARGET, LD_FOR_TARGET, NM_FOR_TARGET): Look into gcc
build directory.
(CONFIGURED_CC_FOR_TARGET, CONFIGURED_CXX_FOR_TARGET,
CONFIGURED_GCJ_FOR_TARGET, CONFIGURED_GCC_FOR_TARGET,
CONFIGURED_GFORTRAN_FOR_TARGET, USUAL_CC_FOR_TARGET,
USUAL_CXX_FOR_TARGET, USUAL_GCJ_FOR_TARGET, USUAL_GCC_FOR_TARGET,
USUAL_RAW_CXX_FOR_TARGET, USUAL_GFORTRAN_FOR_TARGET): New.
(CXX_FOR_TARGET_FOR_RECURSIVE_MAKE,
RAW_CXX_FOR_TARGET_FOR_RECURSIVE_MAKE, RECURSE_FLAGS): Delete.
* configure: Regenerate.
* Makefile.in: Regenerate.
From-SVN: r102855
2005-08-08 11:19:17 +02:00
configure.in (CONFIGURED_BISON, [...]): Remove "CONFIGURED_" from the AC_CHECK_PROGS invocation.
toplevel:
2005-12-05 Paolo Bonzini <bonzini@gnu.org>
* configure.in (CONFIGURED_BISON, CONFIGURED_YACC, CONFIGURED_M4,
CONFIGURED_FLEX, CONFIGURED_LEX, CONFIGURED_MAKEINFO): Remove
"CONFIGURED_" from the AC_CHECK_PROGS invocation. Move below.
Find in-tree tools if available.
(EXPECT, RUNTEST, LIPO, STRIP): Find them and substitute them.
(CONFIGURED_*_FOR_TARGET): Don't set nor substitute.
(*_FOR_TARGET): Set them with GCC_TARGET_TOOL.
(COMPILER_*_FOR_TARGET): New.
* Makefile.tpl (HOST_EXPORTS): Add *_FOR_TARGET symbols that gcc needs.
(BASE_TARGET_EXPORTS): Use COMPILER_*_FOR_TARGET symbols.
(CONFIGURED_*, USUAL_*): Remove.
(BISON, YACC, FLEX, LEX, M4, MAKEINFO, EXPECT, RUNTEST, LIPO,
STRIP): Use autoconf substitutions.
(COMPILER_AS_FOR_TARGET, COMPILER_LD_FOR_TARGET,
COMPILER_NM_FOR_TARGET): New.
(EXTRA_HOST_FLAGS): Pass LIPO and STRIP.
(all): Make all-host and all-target in parallel.
(do-[+make_target+], do-check, install, [+compare-target+]): Ensure
that $$r and $$s are set before invoking a recursive make.
(stage[+id+]-bubble): Likewise, and invoke the comparison at the end.
([+bootstrap-target+]): Inline most of the `all' target.
config:
2005-12-05 Paolo Bonzini <bonzini@gnu.org>
* acx.m4 (GCC_TARGET_TOOL): New.
From-SVN: r108059
2005-12-05 16:00:27 +01:00
AC_SUBST(FLAGS_FOR_TARGET)
configure.in (CC_FOR_TARGET, [...]): Find them with NCN_STRICT_CHECK_TARGET_TOOL, like the other target tools...
2005-08-08 Paolo Bonzini <bonzini@gnu.org>
* configure.in (CC_FOR_TARGET, CXX_FOR_TARGET, GCJ_FOR_TARGET,
GCC_FOR_TARGET, RAW_CXX_FOR_TARGET, GFORTRAN_FOR_TARGET): Find
them with NCN_STRICT_CHECK_TARGET_TOOL, like the other target
tools; remove code to manually set them.
(Target tools): Look in the environment for them.
* Makefile.tpl (CC_FOR_TARGET, CXX_FOR_TARGET, GCJ_FOR_TARGET,
GCC_FOR_TARGET, RAW_CXX_FOR_TARGET, GFORTRAN_FOR_TARGET): Redefine.
(AS_FOR_TARGET, LD_FOR_TARGET, NM_FOR_TARGET): Look into gcc
build directory.
(CONFIGURED_CC_FOR_TARGET, CONFIGURED_CXX_FOR_TARGET,
CONFIGURED_GCJ_FOR_TARGET, CONFIGURED_GCC_FOR_TARGET,
CONFIGURED_GFORTRAN_FOR_TARGET, USUAL_CC_FOR_TARGET,
USUAL_CXX_FOR_TARGET, USUAL_GCJ_FOR_TARGET, USUAL_GCC_FOR_TARGET,
USUAL_RAW_CXX_FOR_TARGET, USUAL_GFORTRAN_FOR_TARGET): New.
(CXX_FOR_TARGET_FOR_RECURSIVE_MAKE,
RAW_CXX_FOR_TARGET_FOR_RECURSIVE_MAKE, RECURSE_FLAGS): Delete.
* configure: Regenerate.
* Makefile.in: Regenerate.
From-SVN: r102855
2005-08-08 11:19:17 +02:00
AC_SUBST(RAW_CXX_FOR_TARGET)
2004-04-09 07:15:06 +02:00
configure.in: Convert to autoconf script.
(toplev)
* configure.in: Convert to autoconf script. Blow away lots
of now-redundant Makefile fragments.
* configure: Generate using Autoconf.
* Makefile.tpl: Rewrite to reflect autoconfiscation.
* Makefile.in: Regenerate.
(config)
* acx.m4: New.
* mh-a68bsd, mh-aix386, mh-apollo68, mh-delta88, mh-hp300,
mh-hpux, mh-hpux8, mh-irix5, mh-irix6, mh-ncrsvr43, mh-openedition,
mh-riscos, mh-sysv: Delete.
* mh-cxux, mh-dgux386, mh-interix, mh-lynxrs6k, mh-ncr3000,
mh-necv4, mh-sco, mh-solaris, mh-sysv4, mh-sysv5, mt-v810: Simplify.
From-SVN: r60558
2002-12-28 07:57:50 +01:00
# Certain tools may need extra flags.
AR_FOR_TARGET=${AR_FOR_TARGET}${extra_arflags_for_target}
RANLIB_FOR_TARGET=${RANLIB_FOR_TARGET}${extra_ranlibflags_for_target}
NM_FOR_TARGET=${NM_FOR_TARGET}${extra_nmflags_for_target}
1997-08-22 00:57:35 +02:00
configure.in (CONFIGURED_BISON, [...]): Remove "CONFIGURED_" from the AC_CHECK_PROGS invocation.
toplevel:
2005-12-05 Paolo Bonzini <bonzini@gnu.org>
* configure.in (CONFIGURED_BISON, CONFIGURED_YACC, CONFIGURED_M4,
CONFIGURED_FLEX, CONFIGURED_LEX, CONFIGURED_MAKEINFO): Remove
"CONFIGURED_" from the AC_CHECK_PROGS invocation. Move below.
Find in-tree tools if available.
(EXPECT, RUNTEST, LIPO, STRIP): Find them and substitute them.
(CONFIGURED_*_FOR_TARGET): Don't set nor substitute.
(*_FOR_TARGET): Set them with GCC_TARGET_TOOL.
(COMPILER_*_FOR_TARGET): New.
* Makefile.tpl (HOST_EXPORTS): Add *_FOR_TARGET symbols that gcc needs.
(BASE_TARGET_EXPORTS): Use COMPILER_*_FOR_TARGET symbols.
(CONFIGURED_*, USUAL_*): Remove.
(BISON, YACC, FLEX, LEX, M4, MAKEINFO, EXPECT, RUNTEST, LIPO,
STRIP): Use autoconf substitutions.
(COMPILER_AS_FOR_TARGET, COMPILER_LD_FOR_TARGET,
COMPILER_NM_FOR_TARGET): New.
(EXTRA_HOST_FLAGS): Pass LIPO and STRIP.
(all): Make all-host and all-target in parallel.
(do-[+make_target+], do-check, install, [+compare-target+]): Ensure
that $$r and $$s are set before invoking a recursive make.
(stage[+id+]-bubble): Likewise, and invoke the comparison at the end.
([+bootstrap-target+]): Inline most of the `all' target.
config:
2005-12-05 Paolo Bonzini <bonzini@gnu.org>
* acx.m4 (GCC_TARGET_TOOL): New.
From-SVN: r108059
2005-12-05 16:00:27 +01:00
# When building target libraries, except in a Canadian cross, we use
# the same toolchain as the compiler we just built.
COMPILER_AS_FOR_TARGET='$(AS_FOR_TARGET)'
COMPILER_LD_FOR_TARGET='$(LD_FOR_TARGET)'
COMPILER_NM_FOR_TARGET='$(NM_FOR_TARGET)'
if test $host = $build; then
case " $configdirs " in
*" gcc "*)
COMPILER_AS_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/as'
COMPILER_LD_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/collect-ld'
COMPILER_NM_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/nm'${extra_nmflags_for_target}
;;
esac
fi
AC_SUBST(COMPILER_AS_FOR_TARGET)
AC_SUBST(COMPILER_LD_FOR_TARGET)
AC_SUBST(COMPILER_NM_FOR_TARGET)
2003-02-20 00:37:24 +01:00
AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
AC_ARG_ENABLE(maintainer-mode,
2011-01-21 14:18:23 +01:00
[AS_HELP_STRING([--enable-maintainer-mode],
[enable make rules and dependencies not useful
(and sometimes confusing) to the casual installer])],
2003-02-20 00:37:24 +01:00
USE_MAINTAINER_MODE=$enableval,
USE_MAINTAINER_MODE=no)
AC_MSG_RESULT($USE_MAINTAINER_MODE)
AC_SUBST(MAINTAINER_MODE_TRUE)
AC_SUBST(MAINTAINER_MODE_FALSE)
if test "$USE_MAINTAINER_MODE" = yes; then
MAINTAINER_MODE_TRUE=
MAINTAINER_MODE_FALSE='#'
else
MAINTAINER_MODE_TRUE='#'
MAINTAINER_MODE_FALSE=
fi
MAINT=$MAINTAINER_MODE_TRUE
AC_SUBST(MAINT)dnl
2004-03-16 01:03:30 +01:00
# ---------------------
# GCC bootstrap support
# ---------------------
# Stage specific cflags for build.
stage1_cflags="-g"
case $build in
vax-*-*)
case ${GCC} in
yes) stage1_cflags="-g -Wa,-J" ;;
*) stage1_cflags="-g -J" ;;
esac ;;
esac
2006-07-04 09:52:47 +02:00
2004-03-16 01:03:30 +01:00
AC_SUBST(stage1_cflags)
2006-12-19 12:01:36 +01:00
# Enable --enable-checking in stage1 of the compiler.
AC_ARG_ENABLE(stage1-checking,
2011-01-21 14:18:23 +01:00
[AS_HELP_STRING([[--enable-stage1-checking[=all]]],
[choose additional checking for stage1 of the compiler])],
2006-12-19 12:01:36 +01:00
[stage1_checking=--enable-checking=${enable_stage1_checking}],
2007-09-05 16:10:07 +02:00
[if test "x$enable_checking" = xno || test "x$enable_checking" = x; then
2015-04-17 19:09:20 +02:00
# For --disable-checking or implicit --enable-checking=release, avoid
# setting --enable-checking=gc in the default stage1 checking for LTO
# bootstraps. See PR62077.
case $BUILD_CONFIG in
*lto*)
2016-04-26 08:10:43 +02:00
stage1_checking=--enable-checking=release,misc,gimple,rtlflag,tree,types;;
*)
stage1_checking=--enable-checking=yes,types;;
2015-04-17 19:09:20 +02:00
esac
2016-04-26 08:10:43 +02:00
if test "x$enable_checking" = x && \
test -d ${srcdir}/gcc && \
test x"`cat ${srcdir}/gcc/DEV-PHASE`" = xexperimental; then
2016-05-01 12:49:25 +02:00
stage1_checking=--enable-checking=yes,types,extra
2016-04-26 08:10:43 +02:00
fi
2006-12-19 12:01:36 +01:00
else
2007-09-05 16:10:07 +02:00
stage1_checking=--enable-checking=$enable_checking,types
2006-12-19 12:01:36 +01:00
fi])
AC_SUBST(stage1_checking)
2004-03-16 01:03:30 +01:00
# Enable -Werror in bootstrap stage2 and later.
AC_ARG_ENABLE(werror,
2011-01-21 14:18:23 +01:00
[AS_HELP_STRING([--enable-werror],
[enable -Werror in bootstrap stage2 and later])], [],
2007-01-19 03:08:33 +01:00
[if test -d ${srcdir}/gcc && test x"`cat $srcdir/gcc/DEV-PHASE`" = xexperimental; then
2007-01-04 10:10:51 +01:00
enable_werror=yes
else
enable_werror=no
fi])
2004-03-24 23:08:39 +01:00
case ${enable_werror} in
yes) stage2_werror_flag="--enable-werror-always" ;;
*) stage2_werror_flag="" ;;
2004-03-16 01:03:30 +01:00
esac
2004-03-24 23:08:39 +01:00
AC_SUBST(stage2_werror_flag)
2004-03-16 01:03:30 +01:00
2013-10-15 22:33:55 +02:00
# Enable --enable-host-shared.
AC_ARG_ENABLE(host-shared,
[AS_HELP_STRING([--enable-host-shared],
[build host code as shared libraries])],
[host_shared=$enableval], [host_shared=no])
AC_SUBST(host_shared)
2015-01-29 17:25:14 +01:00
# PR jit/64780: Require the user to explicitly specify
# --enable-host-shared if the jit is enabled, hinting
# that they might want to do a separate configure/build of
# the jit, to avoid users from slowing down the rest of the
# compiler by enabling the jit.
if test ${host_shared} = "no" ; then
case "${enable_languages}" in
*jit*)
AC_MSG_ERROR([
Enabling language "jit" requires --enable-host-shared.
--enable-host-shared typically slows the rest of the compiler down by
a few %, so you must explicitly enable it.
If you want to build both the jit and the regular compiler, it is often
best to do this via two separate configure/builds, in separate
directories, to avoid imposing the performance cost of
--enable-host-shared on the regular compiler.])
;;
*)
;;
esac
fi
2009-06-26 19:28:40 +02:00
# Specify what files to not compare during bootstrap.
compare_exclusions="gcc/cc*-checksum\$(objext) | gcc/ada/*tools/*"
case "$target" in
hppa*64*-*-hpux*) ;;
hppa*-*-hpux*) compare_exclusions="gcc/cc*-checksum\$(objext) | */libgcc/lib2funcs* | gcc/ada/*tools/*" ;;
2012-09-15 01:23:41 +02:00
powerpc*-ibm-aix*) compare_exclusions="gcc/cc*-checksum\$(objext) | gcc/ada/*tools/* | *libgomp*\$(objext)" ;;
2009-06-26 19:28:40 +02:00
esac
AC_SUBST(compare_exclusions)
2009-09-08 19:55:03 +02:00
AC_CONFIG_FILES([Makefile],
[sed "$extrasub_build" Makefile |
sed "$extrasub_host" |
sed "$extrasub_target" > mf$$
mv -f mf$$ Makefile],
[extrasub_build="$extrasub_build"
extrasub_host="$extrasub_host"
extrasub_target="$extrasub_target"])
AC_OUTPUT