Recent changes in diagnostic outputs have been triggering failures on the s390
testsuite. In particular, capitalization changed in one diagnostic and the
range representation changed in another. This patch makes the obvious updates
to the s390 testsuite.
gcc/testsuite
* gcc.target/s390/20150826-1.c: Update expected output.
* gcc.target/s390/zvector/imm-range-error-1.c: Likewise.
The recent PR95115 change to punt in const_binop on folding operation
with non-NaN operands into NaN if flag_trapping_math broke the following
testcase, because the x * 0.0 simplification punts just if
x maybe a NaN (because NaN * 0.0 is NaN not 0.0) or if one of the operands
could be negative zero. But Inf * 0.0 or -Inf * 0.0 is also NaN, not
0.0, so when NaNs are honored we need to punt for possible infinities too.
2022-02-05 Jakub Jelinek <jakub@redhat.com>
PR tree-optimization/104389
* match.pd (x * 0 -> 0): Punt if x maybe infinite and NaNs are
honored.
* gcc.dg/pr104389.c: New test.
- binutils will complain version info is not found if default ISA spec
is 2.2 for binutils.
Error: cannot find default versions of the ISA extension `zifencei'
gcc/ChangeLog:
* configure.ac: Fix detection for zifencei support.
* configure: Regenerate.
Add -misa-spec to OPTION_DEFAULT_SPECS to make sure -misa-spec will
always pass that into assembler, that prevent GCC and binutils using
different way to interpret the ISA string.
gcc/ChangeLog:
PR target/104219
* config.gcc (riscv*-*-*): Normalize the with_isa_spec value.
(all_defaults): Add isa_spec.
* config/riscv/riscv.h (OPTION_DEFAULT_SPECS): Add isa_spec.
The PR92385 fix meant that we see more VEC_INIT_EXPR outside of INIT_EXPR;
in such cases, we need to wrap them in TARGET_EXPR. I previously fixed
that in build_array_copy; we also need it in process_init_constructor.
After fixing that, I needed to adjust a few places to recognize the
VEC_INIT_EXPR even inside a TARGET_EXPR. And prevent cp_fully_fold_init
from lowering VEC_INIT_EXPR too soon. And handle COMPOUND_EXPR inside
TARGET_EXPR better.
PR c++/104300
PR c++/92385
gcc/cp/ChangeLog:
* cp-tree.h (get_vec_init_expr): New.
(target_expr_needs_replace): New.
* cp-gimplify.cc (cp_gimplify_init_expr): Use it.
(struct cp_fold_data): New.
(cp_fold_r): Only genericize inits at end of fn.
(cp_fold_function): Here.
(cp_fully_fold_init): Not here.
* init.cc (build_vec_init): Use get_vec_init_expr.
* tree.cc (build_vec_init_expr): Likewise.
* typeck2.cc (split_nonconstant_init_1): Likewise.
(process_init_constructor): Wrap VEC_INIT_EXPR in
TARGET_EXPR.
gcc/testsuite/ChangeLog:
* g++.dg/cpp0x/initlist-array14.C: New test.
The std::filesystem code needs to use posix::DIR not ::DIR, as that is
an alias for _WDIR on Windows.
libstdc++-v3/ChangeLog:
* src/filesystem/dir-common.h (_Dir_base::openat): Change return
type to use portable posix::DIR alias.
There is code that only expects to be compiled with clang++ and uses its
<stdatomic.h>, which works because Clang supports the _Atomic specifier
in C++. The addition of <stdatomic.h> to libstdc++ broke this code, as
now it finds the C++ header instead, which is empty for any standard
mode before C++23.
This change allows that code to keep working as before, by forwarding to
clang's <stdatomic.h>.
libstdc++-v3/ChangeLog:
* include/c_compatibility/stdatomic.h [__clang__]: Use
#include_next <stdatomic.h>.
LWG 3014 removed these incorrect noexcept specifications from the C++17
std::filesystem operations. They are also incorrect on the experimental
TS versions and should be removed from them too.
libstdc++-v3/ChangeLog:
* include/experimental/bits/fs_ops.h (fs::copy_file): Remove
noexcept.
(fs::create_directories): Likewise.
(fs::remove_all): Likewise.
* src/filesystem/ops.cc (fs::copy_file): Remove noexcept.
(fs::create_directories): Likewise.
(fs::remove_all): Likewise.
This fixes the remaining filesystem::remove_all race condition by using
POSIX openat to recurse into sub-directories and using POSIX unlinkat to
remove files. This avoids the remaining race where the directory being
removed is replaced with a symlink after the directory has been opened,
so that the filesystem::remove("subdir/file") resolves to "target/file"
instead, because "subdir" has been removed and replaced with a symlink.
The previous patch only fixed the case where the directory was replaced
with a symlink before we tried to open it, but it still used the full
(potentially compromised) path as an argument to filesystem::remove.
The first part of the fix is to use openat when recursing into a
sub-directory with recursive_directory_iterator. This means that opening
"dir/subdir" uses the file descriptor for "dir", and so is sure to open
"dir/subdir" and not "symlink/subdir". (The previous patch to use
O_NOFOLLOW already ensured we won't open "dir/symlink/" here.)
The second part of the fix is to use unlinkat for the remove_all
operation. Previously we used a directory_iterator to get the name of
each file in a directory and then used filesystem::remove(iter->path())
on that name. This meant that any checks (e.g. O_NOFOLLOW) done by the
iterator could be invalidated before the remove operation on that
pathname. The directory iterator contains an open DIR stream, which we
can use to obtain a file descriptor to pass to unlinkat. This ensures
that the file being deleted really is contained within the directory
we're iterating over, rather than using a pathname that could resolve to
some other file.
The filesystem::remove_all function previously used a (non-recursive)
filesystem::directory_iterator for each directory, and called itself
recursively for sub-directories. The new implementation uses a single
filesystem::recursive_directory_iterator object, and calls a new __erase
member function on that iterator. That new __erase member function does
the actual work of removing a file (or a directory after its contents
have been iterated over and removed) using unlinkat. That means we don't
need to expose the DIR stream or its file descriptor to the remove_all
function, it's still encapuslated by the iterator class.
It would be possible to add a __rewind member to directory iterators
too, to call rewinddir after each modification to the directory. That
would make it more likely for filesystem::remove_all to successfully
remove everything even if files are being written to the directory tree
while removing it. It's unclear if that is actually prefereable, or if
it's better to fail and report an error at the first opportunity.
The necessary APIs (openat, unlinkat, fdopendir, dirfd) are defined in
POSIX.1-2008, and in Glibc since 2.10. But if the target doesn't provide
them, the original code (with race conditions) is still used.
This also reduces the number of small memory allocations needed for
std::filesystem::remove_all, because we do not store the full path to
every directory entry that is iterated over. The new filename_only
option means we only store the filename in the directory entry, as that
is all we need in order to use openat or unlinkat.
Finally, rather than duplicating everything for the Filesystem TS, the
std::experimental::filesystem::remove_all implementation now just calls
std::filesystem::remove_all to do the work.
libstdc++-v3/ChangeLog:
PR libstdc++/104161
* acinclude.m4 (GLIBCXX_CHECK_FILESYSTEM_DEPS): Check for dirfd
and unlinkat.
* config.h.in: Regenerate.
* configure: Regenerate.
* include/bits/fs_dir.h (recursive_directory_iterator): Declare
remove_all overloads as friends.
(recursive_directory_iterator::__erase): Declare new member
function.
* include/bits/fs_fwd.h (remove, remove_all): Declare.
* src/c++17/fs_dir.cc (_Dir): Add filename_only parameter to
constructor. Pass file descriptor argument to base constructor.
(_Dir::dir_and_pathname, _Dir::open_subdir, _Dir::do_unlink)
(_Dir::unlink, _Dir::rmdir): Define new member functions.
(directory_iterator): Pass filename_only argument to _Dir
constructor.
(recursive_directory_iterator::_Dir_stack): Adjust constructor
parameters to take a _Dir rvalue instead of creating one.
(_Dir_stack::orig): Add data member for storing original path.
(_Dir_stack::report_error): Define new member function.
(__directory_iterator_nofollow): Move here from dir-common.h and
fix value to be a power of two.
(__directory_iterator_filename_only): Define new constant.
(recursive_directory_iterator): Construct _Dir object and move
into _M_dirs stack. Pass skip_permission_denied argument to first
advance call.
(recursive_directory_iterator::increment): Use _Dir::open_subdir.
(recursive_directory_iterator::__erase): Define new member
function.
* src/c++17/fs_ops.cc (ErrorReporter, do_remove_all): Remove.
(fs::remove_all): Use new recursive_directory_iterator::__erase
member function.
* src/filesystem/dir-common.h (_Dir_base): Add int parameter to
constructor and use openat to implement nofollow semantics.
(_Dir_base::fdcwd, _Dir_base::set_close_on_exec, _Dir_base::openat):
Define new member functions.
(__directory_iterator_nofollow): Move to fs_dir.cc.
* src/filesystem/dir.cc (_Dir): Pass file descriptor argument to
base constructor.
(_Dir::dir_and_pathname, _Dir::open_subdir): Define new member
functions.
(recursive_directory_iterator::_Dir_stack): Adjust constructor
parameters to take a _Dir rvalue instead of creating one.
(recursive_directory_iterator): Check for new nofollow option.
Construct _Dir object and move into _M_dirs stack. Pass
skip_permission_denied argument to first advance call.
(recursive_directory_iterator::increment): Use _Dir::open_subdir.
* src/filesystem/ops.cc (fs::remove_all): Use C++17 remove_all.
This patch continues the refactoring started with r12-6014. I had previously
noted that the resolve_vec* routines can be further simplified by processing
the argument list earlier, so that all routines can use the arrays of arguments
and types. I found that this was useful for some of the routines, but not for
all of them.
For several of the special-cased overloads, we don't specify all of the
possible type combinations in rs6000-overload.def, because the types don't
matter for the expansion we do. For these, we can't use generic error message
handling when the number of arguments is incorrect, because the result is
misleading error messages that indicate argument types are wrong.
So this patch goes halfway and improves the factoring on the remaining special
cases, but leaves vec_splats, vec_promote, vec_extract, vec_insert, and
vec_step alone.
2022-02-02 Bill Schmidt <wschmidt@linux.ibm.com>
gcc/
* config/rs6000/rs6000-c.cc (resolve_vec_mul): Accept args and types
parameters instead of arglist and nargs. Simplify accordingly. Remove
unnecessary test for argument count mismatch.
(resolve_vec_cmpne): Likewise.
(resolve_vec_adde_sube): Likewise.
(resolve_vec_addec_subec): Likewise.
(altivec_resolve_overloaded_builtin): Move overload special handling
after the gathering of arguments into args[] and types[] and the test
for correct number of arguments. Don't perform the test for correct
number of arguments for certain special cases. Call the other special
cases with args and types instead of arglist and nargs.
Due to a pasto error in the documentation, vec_replace_unaligned was
implemented with the same function prototypes as vec_replace_elt. It was
intended that vec_replace_unaligned always specify output vectors as having
type vector unsigned char, to emphasize that elements are potentially
misaligned by this built-in function. This patch corrects the
misimplementation.
2022-02-04 Bill Schmidt <wschmidt@linux.ibm.com>
gcc/
PR target/100808
* doc/extend.texi (Basic PowerPC Built-in Functions Available on ISA
3.1): Provide consistent type names. Remove unnecessary semicolons.
Fix bad line breaks.
The following testcase FAILs when configured with
--with-long-double-format=ieee . Only happens in the -std=c* modes, not the
GNU modes; while the glibc headers have __asm redirects of
vsnprintf and __vsnprinf_chk to __vsnprintfieee128 and
__vsnprintf_chkieee128, the vsnprintf fortification extern inline gnu_inline
always_inline wrapper calls __builtin_vsnprintf_chk and we actually emit
a call to __vsnprinf_chk (i.e. with IBM extended long double) instead of
__vsnprintf_chkieee128.
rs6000_mangle_decl_assembler_name already had cases for *printf and *scanf,
so this just adds another case for *printf_chk. *scanf_chk doesn't exist.
__ prefixing isn't done because *printf_chk already starts with __.
2022-02-04 Jakub Jelinek <jakub@redhat.com>
PR target/104380
* config/rs6000/rs6000.cc (rs6000_mangle_decl_assembler_name): Also
adjust mangling of __builtin*printf_chk.
* gcc.dg/pr104380.c: New test.
We should use the SUGGEST macro for std::uncaught_exception()
deprecation warnings.
libstdc++-v3/ChangeLog:
* include/bits/allocator.h: Qualify std::allocator_traits in
deprecated warnings.
* libsupc++/exception (uncaught_exception): Add suggestion to
deprecated warning.
A recent change to some powerpc tests added explicit -mbig and -mlittle
options, but those options are not valid outside of powerpc-linux.
This patch updates the testcase options to enable -mbig when valid
and to only use -mlittle for powerpc-linux.
gcc/testsuite/ChangeLog:
* gcc.target/powerpc/builtins-1.c: Limit -mbig.
* gcc.target/powerpc/vsu/vec-cntlz-lsbb-0.c: Limit -mbig.
* gcc.target/powerpc/vsu/vec-cntlz-lsbb-1.c: Limit -mbig.
* gcc.target/powerpc/vsu/vec-cntlz-lsbb-2.c: Remove target selector.
* gcc.target/powerpc/vsu/vec-cntlz-lsbb-3.c: Only powerpc*-linux.
* gcc.target/powerpc/vsu/vec-cntlz-lsbb-4.c: Only powerpc*-linux*.
* gcc.target/powerpc/vsu/vec-cnttz-lsbb-0.c: Limit -mbig.
* gcc.target/powerpc/vsu/vec-cnttz-lsbb-1.c: Limit -mbig.
* gcc.target/powerpc/vsu/vec-cnttz-lsbb-2.c: Remove target selector.
* gcc.target/powerpc/vsu/vec-cnttz-lsbb-3.c: Only powerpc*-linux*.
* gcc.target/powerpc/vsu/vec-cnttz-lsbb-4.c: Only powerpc*-linux*.
niter analysis uses multiple_of_p which currently assumes
operations like MULT_EXPR do not wrap. We've got to rely on this
for optimizing size expressions like those in DECL_SIZE and those
generally use unsigned arithmetic with no indication that they
are not expected to wrap. To preserve that the following adds
a parameter to multiple_of_p, defaulted to true, indicating that
the TOP expression is not expected to wrap for outer computations
in TYPE. This mostly follows a patch proposed by Bin last year
with the conversion behavior added.
Applying to all users the new effect is that upon type conversions
in the TOP expression the behavior will switch to honor
TYPE_OVERFLOW_UNDEFINED for the converted sub-expressions.
The patch also changes the occurance in niter analysis that we
know is problematic and we have testcases for to pass false
to multiple_of_p. The patch also contains a change to the
PR72817 fix from Bin to avoid regressing gcc.dg/tree-ssa/loop-42.c.
The intent for stage1 is to introduce a size_multiple_of_p and
internalize the added parameter so all multiple_of_p users will
honor TYPE_OVERFLOW_UNDEFINED and users dealing with size expressions
need to be switched to size_multiple_of_p.
2022-01-26 Richard Biener <rguenther@suse.de>
PR tree-optimization/100499
* fold-const.h (multiple_of_p): Add nowrap parameter, defaulted
to true.
* fold-const.cc (multiple_of_p): Likewise. Honor it for
MULT_EXPR, PLUS_EXPR and MINUS_EXPR and pass it along,
switching to false for conversions.
* tree-ssa-loop-niter.cc (number_of_iterations_ne): Do not
claim the outermost expression does not wrap when calling
multiple_of_p. Refactor the check done to check the
original IV, avoiding a bias that might wrap.
* gcc.dg/torture/pr100499-1.c: New testcase.
* gcc.dg/torture/pr100499-2.c: Likewise.
* gcc.dg/torture/pr100499-3.c: Likewise.
Co-authored-by: Bin Cheng <bin.cheng@linux.alibaba.com>
This removes the odd check of size_type_node when handling left-shifts
as multiplications of 1 << N and instead uses the type as specified.
It also moves left-shift handling next to multiplications where it
semantically belongs.
2022-01-24 Richard Biener <rguenther@suse.de>
* fold-const.cc (multiple_of_p): Re-write and move LSHIFT_EXPR
handling.
Otherwise Bad Things happen when it is populated several times.
gcc/
PR debug/104366
* dwarf2out.cc (dwarf2out_finish): Empty base_types.
(dwarf2out_early_finish): Likewise.
The trapping behavior of the operation needs to be preserved when the
-fnon-call-exceptions switch is in effect. This also adds the same
guards to similar optimizations.
gcc/
PR tree-optimization/104356
* match.pd (X / bool_range_Y is X): Add guard.
(X / X is one): Likewise.
(X / abs (X) is X < 0 ? -1 : 1): Likewise.
(X / -X is -1): Likewise.
(1 / X -> X == 1): Likewise.
The following happens to improve compile-time of the PR103641
testcase on aarch64 significantly. I did not investigate the
effect on the generated code but at least in theory
choose_mult_variant should do a better job when we tell it
the actual mode we are going to use for the operations it
synthesizes.
2022-02-04 Richard Biener <rguenther@suse.de>
PR tree-optimization/103641
* tree-vect-patterns.cc (vect_synth_mult_by_constant):
Pass the vector mode to choose_mult_variant.
This patch addresses PR rtl-optimization/101885 which is a P2 wrong code
regression. In combine, if the resulting fused instruction is a parallel
of two sets which fails to be recognized by the backend, combine tries to
emit these as two sequential set instructions (known as split_i2i3).
As each set is recognized the backend may add any necessary "clobbers".
The code currently checks that any clobbers added to the first "set"
don't interfere with the second set, but doesn't currently handle the
case that clobbers added to the second set may interfere/kill the
destination of the first set (which must be live at this point).
The solution is to cut'n'paste the "clobber" logic from just a few
lines earlier, suitably adjusted for the second instruction.
One minor nit that may confuse a reviewer is that at this point in
the code we've lost track of which set was first and which was second
(combine chooses dynamically, and the recog processes that adds the
clobbers may have obfuscated the original SET_DEST) so the actual test
below is to confirm that any newly added clobbers (on the second set
instruction) don't overlap either set0's or set1's destination.
2022-02-04 Roger Sayle <roger@nextmovesoftware.com>
gcc/ChangeLog
PR rtl-optimization/101885
* combine.cc (try_combine): When splitting a parallel into two
sequential sets, check not only that the first doesn't clobber
the second but also that the second doesn't clobber the first.
gcc/testsuite/ChangeLog
PR rtl-optimization/101885
* gcc.dg/pr101885.c: New test case.
This adds a flag to CONSTRUCTOR nodes indicating that for
clobbers this marks the end-of-life of storage as opposed to
just ending the lifetime of the object that occupied it.
The dangling pointer diagnostics uses CLOBBERs but is confused
by those emitted by the C++ frontend for example which emits
them for the second purpose at the start of CTORs. The issue
is also appearant for aarch64 in PR104092.
Distinguishing the two cases is also necessary for the PR90348 fix.
Since I'm going to add another flag I added an enum clobber_flags
and a defaulted argument to build_clobber plus a convenient way to
query the enum from the CTOR tree and specify it for gimple_clobber_p.
Since 'CLOBBER' is already taken and I needed a name for the unspecified
clobber we have now I used 'CLOBBER_UNDEF'.
2022-02-03 Richard Biener <rguenther@suse.de>
PR middle-end/90348
PR middle-end/104092
gcc/
* tree-core.h (clobber_kind): New enum.
(tree_base::u::bits::address_space): Document use in CONSTRUCTORs.
* tree.h (CLOBBER_KIND): Add.
(build_clobber): Add clobber kind argument, defaulted to
CLOBBER_UNDEF.
* tree.cc (build_clobber): Likewise.
* gimple.h (gimple_clobber_p): New overload with specified kind.
* tree-streamer-in.cc (streamer_read_tree_bitfields): Stream
CLOBBER_KIND.
* tree-streamer-out.cc (streamer_write_tree_bitfields):
Likewise.
* tree-pretty-print.cc (dump_generic_node): Mark EOL CLOBBERs.
* gimplify.cc (gimplify_bind_expr): Build storage end-of-life clobbers
with CLOBBER_EOL.
(gimplify_target_expr): Likewise.
* tree-inline.cc (expand_call_inline): Likewise.
* tree-ssa-ccp.cc (insert_clobber_before_stack_restore): Likewise.
* gimple-ssa-warn-access.cc (pass_waccess::check_stmt): Only treat
CLOBBER_EOL clobbers as ending lifetime of storage.
gcc/lto/
* lto-common.cc (compare_tree_sccs_1): Compare CLOBBER_KIND.
gcc/testsuite/
* gcc.dg/pr87052.c: Adjust.
Here a stale TYPE_DEPENDENT_P/_P_VALID value for f's function type
after replacing the type's DEFERRED_NOEXCEPT with the parsed dependent
noexcept-spec causes us to try to instantiate g's noexcept-spec ahead
of time (since it in turn appears non-dependent), leading to an ICE.
This patch fixes this by clearing TYPE_DEPENDENT_P_VALID in
fixup_deferred_exception_variants appropriately (as in
build_cp_fntype_variant).
That turns out to fix the testcase for C++17 but not for C++11/14,
because it's not until C++17 that a noexcept-spec is part of (and
therefore affects dependence of) the function type. Since dependence of
NOEXCEPT_EXPR is defined in terms of instantiation dependence, the most
appropriate fix for earlier dialects seems to be to make instantiation
dependence consider dependence of a noexcept-spec.
PR c++/104079
gcc/cp/ChangeLog:
* pt.cc (value_dependent_noexcept_spec_p): New predicate split
out from ...
(dependent_type_p_r): ... here.
(instantiation_dependent_r): Use value_dependent_noexcept_spec_p
to consider dependence of a noexcept-spec before C++17.
* tree.cc (fixup_deferred_exception_variants): Clear
TYPE_DEPENDENT_P_VALID.
gcc/testsuite/ChangeLog:
* g++.dg/cpp0x/noexcept74.C: New test.
* g++.dg/cpp0x/noexcept74a.C: New test.
This patch fixes various issues with how -fanalyzer handles "realloc"
seen when debugging PR analyzer/104369.
Previously it wasn't correctly copying over the contents of the old
buffer for the success-with-move case, leading to false
-Wanalyzer-use-of-uninitialized-value diagnostics.
I also noticed that -fanalyzer failed to properly handle "realloc" for
cases where the ptr's region had unknown dynamic extents, and an ICE
for the case where a tainted value is used as a realloc size argument.
This patch fixes these issues, including the false uninit diagnostics
seen in PR analyzer/104369.
gcc/analyzer/ChangeLog:
PR analyzer/104369
* engine.cc (exploded_graph::process_node): Use the node for any
diagnostics, avoiding ICE if a bifurcation update adds a
saved_diagnostic, such as for a tainted realloc size.
* region-model-impl-calls.cc
(region_model::impl_call_realloc::success_no_move::update_model):
Require the old pointer to be non-NULL to be able successfully
grow in place. Use model->deref_rvalue rather than maybe_get_region
to support the old pointer being symbolic.
(region_model::impl_call_realloc::success_with_move::update_model):
Likewise. Add a constraint that the new pointer != the old pointer.
Use a sized_region when setting the value of the new region.
Handle the case where we don't know the dynamic size of the old
region by marking the new region as unknown.
* sm-taint.cc (tainted_allocation_size::tainted_allocation_size):
Update assertion to also allow for MEMSPACE_UNKNOWN.
(tainted_allocation_size::emit): Likewise.
(region_model::check_dynamic_size_for_taint): Likewise.
gcc/testsuite/ChangeLog:
PR analyzer/104369
* gcc.dg/analyzer/pr104369-1.c: New test.
* gcc.dg/analyzer/pr104369-2.c: New test.
* gcc.dg/analyzer/realloc-3.c: New test.
* gcc.dg/analyzer/realloc-4.c: New test.
* gcc.dg/analyzer/taint-realloc.c: New test.
Signed-off-by: David Malcolm <dmalcolm@redhat.com>
It turned out that the analyzer wasn't treating calloc regions
as zero-filled, due to binding_cluster::fill_region getting an
unknown value for the byte_size_size_sval, and thus
get_or_create_repeated_svalue returning an unknown_svalue, which
was then used to fill the region.
Fixed thusly.
gcc/analyzer/ChangeLog:
* region-model-impl-calls.cc (region_model::impl_call_calloc): Use
a sized_region when calling zero_fill_region.
gcc/testsuite/ChangeLog:
* gcc.dg/analyzer/calloc-1.c: New test.
Signed-off-by: David Malcolm <dmalcolm@redhat.com>
%ecx can't be used for both DRAP register and eh_return. Adjust find_drap_reg
to choose %edi for functions that uses __builtin_eh_return to avoid the assert
in ix86_expand_epilogue that enforces this rule.
2022-02-03 Uroš Bizjak <ubizjak@gmail.com>
gcc/ChangeLog:
PR target/104362
* config/i386/i386.cc (find_drap_reg): For 32bit targets
return DI_REG if function uses __builtin_eh_return.
gcc/testsuite/ChangeLog:
PR target/104362
* gcc.target/i386/pr104362.c: New test.
gcc/fortran/ChangeLog:
PR fortran/104311
* check.cc (gfc_calculate_transfer_sizes): Checks for case when
storage size of SOURCE is greater than zero while the storage size
of MOLD is zero and MOLD is an array shall not depend on SIZE.
gcc/testsuite/ChangeLog:
PR fortran/104311
* gfortran.dg/transfer_simplify_15.f90: New test.
In my case:
$ rm ./stmp-fixinc ; time make -j16
takes 17 seconds, where I can reduce it easily with the suggested
change. Then I get to 11.2 seconds.
The scripts searches ~2500 folders in my case with total 20K header
files.
fixincludes/ChangeLog:
* fixinc.in: Use mkdir -p rather that a loop.
The -m[no-]fold-gimple flag was really intended primarily for internal
testing while implementing GIMPLE folding for rs6000 vector built-in
functions. It ended up leaking into other places, causing problems such
as PR103686 identifies. Let's remove it.
There are a number of tests in the testsuite that require adjustment.
Some specify -mfold-gimple directly, which is the default, so that is
handled by removing the option. Others unnecessarily specify
-mno-fold-gimple, as the tests work fine without this. Again that is
handled by removing the option. There are a couple of extra variants of
tests specifically for -mno-fold-gimple; for those, we can just remove the
whole test.
gcc.target/powerpc/builtins-1.c was more problematic. It was written in
such a way as to be extremely fragile. For this one, I rewrote the whole
test in a different style, using individual functions to test each
built-in function. These same tests are also largely covered by
builtins-1-be-folded.c and builtins-1-le-folded.c, so I chose to
explicitly make this test -mbig for simplicity, and use -O2 for clean code
generation. I made some slight modifications to the expected instruction
counts as a result, and tested on both 32- and 64-bit.
2022-02-02 Bill Schmidt <wschmidt@linux.ibm.com>
gcc/
PR target/103686
* config/rs6000/rs6000-builtin.cc (rs6000_gimple_fold_builtin): Remove
test for !rs6000_fold_gimple.
* config/rs6000/rs6000.cc (rs6000_option_override_internal): Likewise.
* config/rs6000/rs6000.opt (mfold-gimple): Remove.
gcc/testsuite/
PR target/103686
* gcc.target/powerpc/builtins-1-be-folded.c: Remove -mfold-gimple
option.
* gcc.target/powerpc/builtins-1-le-folded.c: Likewise.
* gcc.target/powerpc/builtins-1.c: Rewrite to use small functions and
restrict to -O2 -mbig for predictability. Adjust instruction counts.
* gcc.target/powerpc/builtins-5.c: Remove -mno-fold-gimple option.
* gcc.target/powerpc/p8-vec-xl-xst.c: Likewise.
* gcc.target/powerpc/pr83926.c: Likewise.
* gcc.target/powerpc/pr86731-nogimplefold-longlong.c: Delete.
* gcc.target/powerpc/pr86731-nogimplefold.c: Delete.
* gcc.target/powerpc/swaps-p8-17.c: Remove -mno-fold-gimple option.
These built-ins were misimplemented as always having big-endian semantics.
2022-01-18 Bill Schmidt <wschmidt@linux.ibm.com>
gcc/
PR target/95082
* config/rs6000/rs6000-builtin.cc (rs6000_expand_builtin): Handle
endianness for vclzlsbb and vctzlsbb.
* config/rs6000/rs6000-builtins.def (VCLZLSBB_V16QI): Change
default pattern and indicate a different pattern will be used for
big endian.
(VCLZLSBB_V4SI): Likewise.
(VCLZLSBB_V8HI): Likewise.
(VCTZLSBB_V16QI): Likewise.
(VCTZLSBB_V4SI): Likewise.
(VCTZLSBB_V8HI): Likewise.
gcc/testsuite/
PR target/95082
* gcc.target/powerpc/vsu/vec-cntlz-lsbb-0.c: Restrict to -mbig.
* gcc.target/powerpc/vsu/vec-cntlz-lsbb-1.c: Likewise.
* gcc.target/powerpc/vsu/vec-cntlz-lsbb-3.c: New.
* gcc.target/powerpc/vsu/vec-cntlz-lsbb-4.c: New.
* gcc.target/powerpc/vsu/vec-cnttz-lsbb-0.c: Restrict to -mbig.
* gcc.target/powerpc/vsu/vec-cnttz-lsbb-1.c: Likewise.
* gcc.target/powerpc/vsu/vec-cnttz-lsbb-3.c: New.
* gcc.target/powerpc/vsu/vec-cnttz-lsbb-4.c: New.
Continuing with the refactoring effort, this patch moves as much of the
target-specific built-in support code into a new file, rs6000-builtin.cc.
However, we can't easily move the overloading support code out of
rs6000-c.cc, because the build machinery understands that as a special file
to be included with the C and C++ front ends.
This patch is just a straightforward move, with one exception. I found
that the builtin_mode_to_type[] array is no longer used, so I also removed
all code having to do with it.
The code in rs6000-builtin.cc is organized in related sections:
- General support functions
- Initialization support
- GIMPLE folding support
- Expansion support
Overloading support remains in rs6000-c.cc.
2022-02-03 Bill Schmidt <wschmidt@linux.ibm.com>
gcc/
* config.gcc (powerpc*-*-*): Add rs6000-builtin.o to extra_objs.
* config/rs6000/rs6000-builtin.cc: New file, containing code moved
from other files.
* config/rs6000/rs6000-call.cc (cpu_is_info): Move to
rs6000-builtin.cc.
(cpu_supports_info): Likewise.
(rs6000_type_string): Likewise.
(altivec_expand_predicate_builtin): Likewise.
(rs6000_htm_spr_icode): Likewise.
(altivec_expand_vec_init_builtin): Likewise.
(get_element_number): Likewise.
(altivec_expand_vec_set_builtin): Likewise.
(altivec_expand_vec_ext_builtin): Likewise.
(rs6000_invalid_builtin): Likewise.
(rs6000_fold_builtin): Likewise.
(fold_build_vec_cmp): Likewise.
(fold_compare_helper): Likewise.
(map_to_integral_tree_type): Likewise.
(fold_mergehl_helper): Likewise.
(fold_mergeeo_helper): Likewise.
(rs6000_builtin_valid_without_lhs): Likewise.
(rs6000_builtin_is_supported): Likewise.
(rs6000_gimple_fold_mma_builtin): Likewise.
(rs6000_gimple_fold_builtin): Likewise.
(rs6000_expand_ldst_mask): Likewise.
(cpu_expand_builtin): Likewise.
(elemrev_icode): Likewise.
(ldv_expand_builtin): Likewise.
(lxvrse_expand_builtin): Likewise.
(lxvrze_expand_builtin): Likewise.
(stv_expand_builtin): Likewise.
(mma_expand_builtin): Likewise.
(htm_spr_num): Likewise.
(htm_expand_builtin): Likewise.
(rs6000_expand_builtin): Likewise.
(rs6000_vector_type): Likewise.
(rs6000_init_builtins): Likewise. Remove initialization of
builtin_mode_to_type entries.
(rs6000_builtin_decl): Move to rs6000-builtin.cc.
* config/rs6000/rs6000.cc (rs6000_builtin_mask_for_load): New
external declaration.
(rs6000_builtin_md_vectorized_function): Likewise.
(rs6000_builtin_reciprocal): Likewise.
(altivec_builtin_mask_for_load): Move to rs6000-builtin.cc.
(rs6000_builtin_types): Likewise.
(builtin_mode_to_type): Remove.
(rs6000_builtin_mask_for_load): Move to rs6000-builtin.cc. Remove
static qualifier.
(rs6000_builtin_md_vectorized_function): Likewise.
(rs6000_builtin_reciprocal): Likewise.
* config/rs6000/rs6000.h (builtin_mode_to_type): Remove.
* config/rs6000/t-rs6000 (rs6000-builtin.o): New target.
The following avoids NRV from massaging DECL_ABSTRACT_ORIGIN after
variable creation since NRV runs _after_ the function was inlined and thus
affects the inlined variables copy indirectly. We may adjust the abstract
origin of a variable only at the point we create it, not further along the
path since otherwise the (new) invariant that the abstract origin is always
the ultimate origin cannot be maintained.
The intent of what NRV does is OK I guess and it may improve the debug
experience. But I also notice we do
SET_DECL_VALUE_EXPR (found, result);
DECL_HAS_VALUE_EXPR_P (found) = 1;
the code is there since the merge from tree-ssa which added tree-nrv.c.
Jakub added the DECL_VALUE_EXPR in g:938650d8fddb878f623e315f0b7fd94b217efa96
and Jason added the abstract origin setting conditional in g:7716876bbd3a
The follwoing takes the radical approach and remove the attempt
to "optimize" the debug info.
The gdb testsuites show no regressions.
2022-02-03 Richard Biener <rguenther@suse.de>
PR debug/104337
* tree-nrv.cc (pass_nrv::execute): Remove tieing result and found
together via DECL_ABSTRACT_ORIGIN.
* gcc.dg/debug/pr104337.c: New testcase.
The fur_list constructor for two ranges is leaving [1] in an undefined
state. The reason we haven't noticed is because after all the
shuffling in the last cycle there are no remaining users of it
(similarly for fur_list(unsigned, irange *)).
Since it's very late in the cycle, I would prefer to fix this, rather
than removing unused constructors altogether. Besides, we have uses
of them queued up for the next release.
gcc/ChangeLog:
* gimple-range-fold.cc (fur_list::fur_list): Set m_local[1] correctly.
