In order to enable DWARF versions > 2 we need a sufficiently modern
version of dsymutil (in addition to the assembler / linker). This
allows the user to configure a different path from the installed one.
In addition, there are several sources of dsymutil so we differentiate
these in order to be get accurate version information.
Backported from commits 3b5e8ee4f1 and
b019b28ebd
Signed-off-by: Iain Sandoe <iain@sandoe.co.uk>
gcc/ChangeLog:
* configure.ac: Handle --with-dsymutil in the same way as we
do for the assembler and linker. (DEFAULT_DSYMUTIL): New.
Extract the type and version for the dsymutil configured or
found by the default searches.
* config.in: Regenerated.
* configure: Regenerated.
* collect2.c (do_dsymutil): Handle locating dsymutil in the
same way as for the assembler and linker.
* config/darwin.h (DSYMUTIL): Delete.
* gcc.c: Report a configured dsymutil correctly.
* exec-tool.in: Allow for dsymutil.
* doc/install.texi: Document --with-dsymutil.
ChangeLog:
* Makefile.def: Add dsymutil defs.
* Makefile.in: Regenerated.
* Makefile.tpl: Add dsymutil to flags.
* configure: Regenerated.
* configure.ac: Add dsymutil to target and build recipes.
This makes the host_shared value available to host makefile
fragments.
It uses this to adjust Darwin's mdynamic-no-pic in the case that
shared host resources are required.
Signed-off-by: Iain Sandoe <iain@sandoe.co.uk>
ChangeLog:
* Makefile.in: Regenerate.
* Makefile.tpl: Make the state of the configured host
shared flag available to makefile fragements.
config/ChangeLog:
* mh-darwin: Require a non-shared host configuration to
enable mdynamic-no-pic where that is supported.
(cherry picked from commit d39367fa82)
2019-04-09 Martin Liska <mliska@suse.cz>
* Makefile.in: Regenerate.
* Makefile.tpl: Pass GENERATOR_CFLAGS
in all stages.
2019-04-09 Martin Liska <mliska@suse.cz>
* bootstrap-lto-lean.mk: New file.
2019-04-09 Martin Liska <mliska@suse.cz>
* Makefile.in: Use GENERATOR_CFLAGS for all generators.
* doc/install.texi: Document the new config.
From-SVN: r270223
autofdo create_gcov uses a lot of memory for large sample files.
Since gcc runs quite long the sample files generated during
the bootstrap are fairly ig.
Currently I can't even build make autoprofiledbootstrap on my system at
home because create_gcov needs more than 12GB and runs out of memory.
This should probably be fixed in create_gcov, but for now
lowering the sampling rate works well enough for me. The bootstrap
run is long enough that it gets good enough data in any case.
gcc/:
2019-01-14 Andi Kleen <ak@linux.intel.com>
* Makefile.in: Lower autofdo sampling rate by 10x.
* Makefile.tpl: Dito.
From-SVN: r267930
ChangeLog:
* Makefile.def (target_modules): Add libphobos.
(flags_to_pass): Add GDC, GDCFLAGS, GDC_FOR_TARGET and
GDCFLAGS_FOR_TARGET.
(dependencies): Make libphobos depend on libatomic, libbacktrace
configure, and zlib configure.
(language): Add language d.
* Makefile.in: Rebuild.
* Makefile.tpl (BUILD_EXPORTS): Add GDC and GDCFLAGS.
(HOST_EXPORTS): Add GDC.
(POSTSTAGE1_HOST_EXPORTS): Add GDC and GDC_FOR_BUILD.
(BASE_TARGET_EXPORTS): Add GDC.
(GDC_FOR_BUILD, GDC, GDCFLAGS): New variables.
(GDC_FOR_TARGET, GDC_FLAGS_FOR_TARGET): New variables.
(EXTRA_HOST_FLAGS): Add GDC.
(STAGE1_FLAGS_TO_PASS): Add GDC.
(EXTRA_TARGET_FLAGS): Add GDC and GDCFLAGS.
* config-ml.in: Treat GDC and GDCFLAGS like other compiler/flag
environment variables.
* configure: Rebuild.
* configure.ac: Add target-libphobos to target_libraries. Set and
substitute GDC_FOR_BUILD and GDC_FOR_TARGET.
config/ChangeLog:
* multi.m4: Set GDC.
gcc/ChangeLog:
* Makefile.in (tm_d_file_list, tm_d_include_list): New variables.
(TM_D_H, D_TARGET_DEF, D_TARGET_H, D_TARGET_OBJS): New variables.
(tm_d.h, cs-tm_d.h, default-d.o): New rules.
(d/d-target-hooks-def.h, s-d-target-hooks-def-h): New rules.
(s-tm-texi): Also check timestamp on d-target.def.
(generated_files): Add TM_D_H and d-target-hooks-def.h.
(build/genhooks.o): Also depend on D_TARGET_DEF.
* config.gcc (tm_d_file, d_target_objs, target_has_targetdm): New
variables.
* config/aarch64/aarch64-d.c: New file.
* config/aarch64/aarch64-linux.h (GNU_USER_TARGET_D_CRITSEC_SIZE):
Define.
* config/aarch64/aarch64-protos.h (aarch64_d_target_versions): New
prototype.
* config/aarch64/aarch64.h (TARGET_D_CPU_VERSIONS): Define.
* config/aarch64/t-aarch64 (aarch64-d.o): New rule.
* config/arm/arm-d.c: New file.
* config/arm/arm-protos.h (arm_d_target_versions): New prototype.
* config/arm/arm.h (TARGET_D_CPU_VERSIONS): Define.
* config/arm/linux-eabi.h (EXTRA_TARGET_D_OS_VERSIONS): Define.
* config/arm/t-arm (arm-d.o): New rule.
* config/default-d.c: New file.
* config/glibc-d.c: New file.
* config/gnu.h (GNU_USER_TARGET_D_OS_VERSIONS): Define.
* config/i386/i386-d.c: New file.
* config/i386/i386-protos.h (ix86_d_target_versions): New prototype.
* config/i386/i386.h (TARGET_D_CPU_VERSIONS): Define.
* config/i386/linux-common.h (EXTRA_TARGET_D_OS_VERSIONS): Define.
(GNU_USER_TARGET_D_CRITSEC_SIZE): Define.
* config/i386/t-i386 (i386-d.o): New rule.
* config/kfreebsd-gnu.h (GNU_USER_TARGET_D_OS_VERSIONS): Define.
* config/kopensolaris-gnu.h (GNU_USER_TARGET_D_OS_VERSIONS): Define.
* config/linux-android.h (ANDROID_TARGET_D_OS_VERSIONS): Define.
* config/linux.h (GNU_USER_TARGET_D_OS_VERSIONS): Define.
* config/mips/linux-common.h (EXTRA_TARGET_D_OS_VERSIONS): Define.
* config/mips/mips-d.c: New file.
* config/mips/mips-protos.h (mips_d_target_versions): New prototype.
* config/mips/mips.h (TARGET_D_CPU_VERSIONS): Define.
* config/mips/t-mips (mips-d.o): New rule.
* config/powerpcspe/linux.h (GNU_USER_TARGET_D_OS_VERSIONS): Define.
* config/powerpcspe/linux64.h (GNU_USER_TARGET_D_OS_VERSIONS): Define.
* config/powerpcspe/powerpcspe-d.c: New file.
* config/powerpcspe/powerpcspe-protos.h (rs6000_d_target_versions):
New prototype.
* config/powerpcspe/powerpcspe.c (rs6000_output_function_epilogue):
Support GNU D by using 0 as the language type.
* config/powerpcspe/powerpcspe.h (TARGET_D_CPU_VERSIONS): Define.
* config/powerpcspe/t-powerpcspe (powerpcspe-d.o): New rule.
* config/riscv/riscv-d.c: New file.
* config/riscv/riscv-protos.h (riscv_d_target_versions): New
prototype.
* config/riscv/riscv.h (TARGET_D_CPU_VERSIONS): Define.
* config/riscv/t-riscv (riscv-d.o): New rule.
* config/rs6000/linux.h (GNU_USER_TARGET_D_OS_VERSIONS): Define.
* config/rs6000/linux64.h (GNU_USER_TARGET_D_OS_VERSIONS): Define.
* config/rs6000/rs6000-d.c: New file.
* config/rs6000/rs6000-protos.h (rs6000_d_target_versions): New
prototype.
* config/rs6000/rs6000.c (rs6000_output_function_epilogue):
Support GNU D by using 0 as the language type.
* config/rs6000/rs6000.h (TARGET_D_CPU_VERSIONS): Define.
* config/rs6000/t-rs6000 (rs6000-d.o): New rule.
* config/s390/s390-d.c: New file.
* config/s390/s390-protos.h (s390_d_target_versions): New prototype.
* config/s390/s390.h (TARGET_D_CPU_VERSIONS): Define.
* config/s390/t-s390 (s390-d.o): New rule.
* config/sparc/sparc-d.c: New file.
* config/sparc/sparc-protos.h (sparc_d_target_versions): New
prototype.
* config/sparc/sparc.h (TARGET_D_CPU_VERSIONS): Define.
* config/sparc/t-sparc (sparc-d.o): New rule.
* config/t-glibc (glibc-d.o): New rule.
* configure: Regenerated.
* configure.ac (tm_d_file): New variable.
(tm_d_file_list, tm_d_include_list, d_target_objs): Add substitutes.
* doc/contrib.texi (Contributors): Add self for the D frontend.
* doc/frontends.texi (G++ and GCC): Mention D as a supported language.
* doc/install.texi (Configuration): Mention libphobos as an option for
--enable-shared. Mention d as an option for --enable-languages.
(Testing): Mention check-d as a target.
* doc/invoke.texi (Overall Options): Mention .d, .dd, and .di as file
name suffixes. Mention d as a -x option.
* doc/sourcebuild.texi (Top Level): Mention libphobos.
* doc/standards.texi (Standards): Add section on D language.
* doc/tm.texi: Regenerated.
* doc/tm.texi.in: Add @node for D language and ABI, and @hook for
TARGET_CPU_VERSIONS, TARGET_D_OS_VERSIONS, and TARGET_D_CRITSEC_SIZE.
* dwarf2out.c (is_dlang): New function.
(gen_compile_unit_die): Use DW_LANG_D for D.
(declare_in_namespace): Return module die for D, instead of adding
extra declarations into the namespace.
(gen_namespace_die): Generate DW_TAG_module for D.
(gen_decl_die): Handle CONST_DECLSs for D.
(dwarf2out_decl): Likewise.
(prune_unused_types_walk_local_classes): Handle DW_tag_interface_type.
(prune_unused_types_walk): Handle DW_tag_interface_type same as other
kinds of aggregates.
* gcc.c (default_compilers): Add entries for .d, .dd and .di.
* genhooks.c: Include d/d-target.def.
gcc/po/ChangeLog:
* EXCLUDES: Add sources from d/dmd.
gcc/testsuite/ChangeLog:
* gcc.misc-tests/help.exp: Add D to option descriptions check.
* gdc.dg/asan/asan.exp: New file.
* gdc.dg/asan/gdc272.d: New test.
* gdc.dg/compilable.d: New test.
* gdc.dg/dg.exp: New file.
* gdc.dg/gdc254.d: New test.
* gdc.dg/gdc260.d: New test.
* gdc.dg/gdc270a.d: New test.
* gdc.dg/gdc270b.d: New test.
* gdc.dg/gdc282.d: New test.
* gdc.dg/gdc283.d: New test.
* gdc.dg/imports/gdc170.d: New test.
* gdc.dg/imports/gdc231.d: New test.
* gdc.dg/imports/gdc239.d: New test.
* gdc.dg/imports/gdc241a.d: New test.
* gdc.dg/imports/gdc241b.d: New test.
* gdc.dg/imports/gdc251a.d: New test.
* gdc.dg/imports/gdc251b.d: New test.
* gdc.dg/imports/gdc253.d: New test.
* gdc.dg/imports/gdc254a.d: New test.
* gdc.dg/imports/gdc256.d: New test.
* gdc.dg/imports/gdc27.d: New test.
* gdc.dg/imports/gdcpkg256/package.d: New test.
* gdc.dg/imports/runnable.d: New test.
* gdc.dg/link.d: New test.
* gdc.dg/lto/lto.exp: New file.
* gdc.dg/lto/ltotests_0.d: New test.
* gdc.dg/lto/ltotests_1.d: New test.
* gdc.dg/runnable.d: New test.
* gdc.dg/simd.d: New test.
* gdc.test/gdc-test.exp: New file.
* lib/gdc-dg.exp: New file.
* lib/gdc.exp: New file.
libphobos/ChangeLog:
* Makefile.am: New file.
* Makefile.in: New file.
* acinclude.m4: New file.
* aclocal.m4: New file.
* config.h.in: New file.
* configure: New file.
* configure.ac: New file.
* d_rules.am: New file.
* libdruntime/Makefile.am: New file.
* libdruntime/Makefile.in: New file.
* libdruntime/__entrypoint.di: New file.
* libdruntime/__main.di: New file.
* libdruntime/gcc/attribute.d: New file.
* libdruntime/gcc/backtrace.d: New file.
* libdruntime/gcc/builtins.d: New file.
* libdruntime/gcc/config.d.in: New file.
* libdruntime/gcc/deh.d: New file.
* libdruntime/gcc/libbacktrace.d.in: New file.
* libdruntime/gcc/unwind/arm.d: New file.
* libdruntime/gcc/unwind/arm_common.d: New file.
* libdruntime/gcc/unwind/c6x.d: New file.
* libdruntime/gcc/unwind/generic.d: New file.
* libdruntime/gcc/unwind/package.d: New file.
* libdruntime/gcc/unwind/pe.d: New file.
* m4/autoconf.m4: New file.
* m4/druntime.m4: New file.
* m4/druntime/cpu.m4: New file.
* m4/druntime/libraries.m4: New file.
* m4/druntime/os.m4: New file.
* m4/gcc_support.m4: New file.
* m4/gdc.m4: New file.
* m4/libtool.m4: New file.
* src/Makefile.am: New file.
* src/Makefile.in: New file.
* src/libgphobos.spec.in: New file.
* testsuite/Makefile.am: New file.
* testsuite/Makefile.in: New file.
* testsuite/config/default.exp: New file.
* testsuite/lib/libphobos-dg.exp: New file.
* testsuite/lib/libphobos.exp: New file.
* testsuite/testsuite_flags.in: New file.
From-SVN: r265573
This patch turns dependencies of non-bootstrap targets on bootstrap
targets for bootstrap builds into dependencies on stage_last. This
arrangement gets stage1-bubble to run from stage_last if we haven't
started a bootstrap yet, and to use the current stage otherwise. This
was already the case of target libs, just not of non-bootstrapped host
modules.
In order to retain preexisting dependencies in non-bootstrap builds,
or in gcc-less builds, this introduces support for @unless/@endunless
pairs in Makefile.in.
There is a remaining possibility of problem if activating, in a tree
configured for bootstrap, a parallel build of two or more modules, at
least one bootstrapped and one not. In this case, make might decide
to build stage_current and stage_last in parallel, the latter will
start a submake to build stage1 while the initial make, having
satisfied stage_current, proceeds to build the bootstrapped module in
non-bootstrapped configurations. The two builds will overlap and will
likely conflict. This situation does NOT arise in normal settings,
however: a post-bootstrap build of all-host all-target will indeed
activate such targets concurrently, but only after building all
bootstrapped modules successfully, and it will have both stage_last
and stage_current targets already satisfied, so the potential race
between builds will not arise.
Another remaining problem, that is slightly expanded with this patch,
is that of an interrupted build in a tree configured for bootstrap,
continued with a non-bootstrapped target. Target modules that were
not bootstrapped would already fail to complete the current stage when
activated explicitly in the command line for a retry; host modules,
however, would attempt to build their bootstrapped dependencies, which
is what led to the problem of concurrent builds addressed with this
patch. An interrupted or failed build might still recover correctly,
if the non-bootstrapped target is activated in both builds, because
then make will remove stage_last when its build command is
interrupted, so that it will attempt to recreate it with stage1-bubble
in the second try. A bootstrap build, however, will not be attempting
to build stage_last, so the file will remain and the retry won't go
through stage1-bubble. We have lived with that for target modules, so
we can probably live with that for host modules too.
Another undesirable consequence of this change is that non-boostrapped
host modules, in a tree configured for bootstrap, when activated as
make all-<module>, will build all of stage1 instead of only the
module's usual dependencies. This is intentional and necessary to fix
the parallel-build problem. If it's not desirable, disabling the
unnecessary bootstrap configuration will suffice to restore the
original set of dependencies.
for ChangeLog
* configure.ac: Introduce support for @unless/@endunless.
* Makefile.tpl (dep-kind): Rewrite with cond; return
postbootstrap in some cases.
(make-postboot-dep, postboot-targets): New.
(dependencies): Do not output postbootstrap dependencies at
first. Output non-target ones changed for configure to depend
on stage_last @if gcc-bootstrap, and the original deps @unless
gcc-bootstrap.
* configure.in, Makefile.in: Rebuilt.
From-SVN: r262267
2017-10-27 Martin Liska <mliska@suse.cz>
* Makefile.tpl: Use proper name of folder as it was renamed
during transition to 4 stages.
* Makefile.in: Regenerate.
From-SVN: r254150
Add support for profiledbootstrap with autofdo. Will be useful
to get better testing coverage of autofdo.
This requires Linux perf and autofdo to be installed, only
really for x86_64 linux on Intel so far.
Profile the whole build process with perf, then convert the file,
and pass it back to the compiler in the feedback stage.
The conversion has to be done per language, as only that knows
the name of the binary. Currently we only do it for C and C++,
as the other languages don't have enough coverage during a normal
bootstrap.
For lto1 it is also disabled, because it would only be useful during a LTO
bootstrap, but right now autofdo and LTO are not working together due to
PR66229
For common backend files always the profile output of the C++ compiler
is used. In theory multiple inputs could be merged here, but so far
that is not implemented.
The method is not friendly to partial rebuilds, as only the profile
information from the current rebuild is used. So if an error
occurs it is best to clean and restart, otherwise the code
quality may be worse.
This patch is fairly large, but most of it is auto generated from
autogen in Makefile.in. for the new stage targets.
Passes profiledbootstrap and normal bootstrap on x86_64-linux.
autoprofiledbootstrap is currently not working due to
PR70427 (but it finishes with that worked around)
The autofdo'ed compiler is ~7% faster on insn-recog.i (vs ~11% for
profiledfeedback), and ~4% faster for tramp3d-v4 (vs 10% for
profiledfeedback) on a Sandy Bridge system.
gcc/lto/:
2016-06-23 Andi Kleen <ak@linux.intel.com>
* Make-lang.in: Add support for autofdo (disabled for now)
gcc/cp/:
2016-06-23 Andi Kleen <ak@linux.intel.com>
* Make-lang.in: Add support for autofdo.
gcc/:
2016-06-23 Andi Kleen <ak@linux.intel.com>
* Makefile.in: Regenerate.
* doc/install.texi: Document autoprofiledbootstrap.
/:
2016-06-23 Andi Kleen <ak@linux.intel.com>
* Makefile.def: Add autoprofiledbootstrap.
* Makefile.tpl: Dito.
* Makefile.in: Regenerate.
gcc/c/:
2016-06-23 Andi Kleen <ak@linux.intel.com>
* Make-lang.in: Add support for autofdo.
From-SVN: r237733
Currently, distclean does not remove the libcc1, gnattools, and gotools
directories, and not the stage_final file either. Fix that.
PR bootstrap/70173
* Makefile.tpl (local-distclean): Delete the libcc1, gnattools,
and gotools directories. Delete the stage_final file.
* Makefile.in: Regenerate.
From-SVN: r234954
The patch disables all fuse-*.c tests when configuring gcc with isl 0.14 or earlier.
ChangeLog:
* Makefile.in: Regenerate.
* Makefile.tpl: Export ISLVER.
* configure: Regenerate.
* config/isl.m4: Detect isl-0.15.
gcc/
* Makefile.in: Set ISLVER in site.exp.
gcc/testsuite/
* gcc.dg/graphite/graphite.exp: Only run the fuse-*.c tests with isl-0.15.
Co-Authored-By: Sebastian Pop <s.pop@samsung.com>
From-SVN: r232811
PR bootstrap/64023
* Makefile.tpl (EXTRA_TARGET_FLAGS): Set STAGE1_LDFLAGS
to POSTSTAGE1_LDFLAGS and STAGE1_LIBS to POSTSTAGE1_LIBS.
Add -B to libstdc++-v3/src/.libs and libstdc++-v3/libsupc++/.libs
to CXX.
* Makefile.in: Regenerated.
From-SVN: r218705
Change the bootstrap-lto config file to use slim (non fat) LTO..
Speeds up the LTO bootstrap by ~18% on a 4 core system.
This requires using gcc-ar/ranlib in post stage 1 builds, so these
are passed to all sub builds.
config/:
2014-09-01 Andi Kleen <ak@linux.intel.com>
* bootstrap-lto.mk: Implement slim bootstrap.
/:
2014-09-01 Andi Kleen <ak@linux.intel.com>
* Makefile.tpl (POSTSTAGE1_HOST_EXPORTS): Add LTO_EXPORTS.
POSTSTAGE1_FLAGS_TO_PASS): Add LTO_FLAGS_TO_PASS.
* Makefile.in: Regenerate.
From-SVN: r214801
* Makefile.tpl (configure-[+prefix+][+module+])
(configure-stage[+id+]-[+prefix+][+module+]): If specified, use
"module_srcdir" instead of "module" for locating a module's srcdir.
* Makefile.in: Regenerate.
From-SVN: r211643
PR bootstrap/58572
* Makefile.tpl (POSTSTAGE1_CXX_EXPORT): Use -isystem instead of
-I for libstdc++-v3 includes if $(LEAN).
* Makefile.in: Regenerated.
From-SVN: r208400
2012-11-28 Andrew Pinski <apinski@cavium.com>
PR bootstrap/54279
* configure.ac (CXX_FOR_TARGET): Change over to use xg++.
* configure: Regenerate.
* Makefile.tpl (POSTSTAGE1_CXX_EXPORT): Change over to use xg++.
* Makefile.in: Regenerate.
2012-11-28 Andrew Pinski <apinski@cavium.com>
PR bootstrap/54279
* Makefile.in (${QMTEST_DIR}/context): Use xg++ instead of g++.
2012-11-28 Andrew Pinski <apinski@cavium.com>
PR bootstrap/54279
* Make-lang.in (g++$(exeext)): Rename to
(xg++$(exeext)): This.
(g++-cross$(exeext)): Use xg++$(exeext) instead of g++$(exeext).
(c++.start.encap): Likewise.
(c++.install-common): Likewise.
2012-11-28 Andrew Pinski <apinski@cavium.com>
PR bootstrap/54279
* lib/g++.exp (g++_init): Search for xg++ instead of g++ in the build
directories.
* lib/obj-c++.exp (obj-c++_init): Likewise.
2012-11-28 Andrew Pinski <apinski@cavium.com>
PR bootstrap/54279
* scripts/testsuite_flags.in (--build-cxx): Use xg++ instead of g++.
* testsuite/lib/libstdc++.exp (libstdc++_init): Likewise.
From-SVN: r193910
PR bootstrap/54820
* Makefile.tpl (STAGE1_FLAGS_TO_PASS): New variable.
(all-[+prefix+][+module+]): Pass stage1_args to sub-makes.
(all-stage[+id+]-[+prefix+][+module+]): Likewise, if prev is false.
(clean-stage[+id+]-[+prefix+][+module+]): Likewise, if prev is false.
(host_modules): Set stage1_args to STAGE1_FLAGS_TO_PASS.
* Makefile.in: Regenerate.
* configure.ac (have_static_libs): New variable and associated check.
(stage1-ldflags): Move to after stage1_libs and set to -static-libstdc++
-static-libgcc if stage1_libs is empty and have_static_libs is yes.
* configure: Regenerate.
ada/
* gcc-interface/Make-lang.in (GCC_LINK): Remove hardcoded options.
From-SVN: r192666
Merge from cxx-conversion branch (http://gcc.gnu.org/wiki/cxx-conversion).
As described in http://gcc.gnu.org/ml/gcc/2012-08/msg00015.html, this patch
changes the default bootstrap process so that stage 1 always builds with a C++
compiler.
Other than the bootstrap change, the patch makes no functional changes to the
compiler. Everything should build as it does now in trunk. The main
changes in this patch are:
1- Configuration changes.
2- Re-write of VEC.
3- Re-write of gengtype to support C++ templates and
user-provided marking functions.
4- New hash table class.
5- Re-write double_int.
6- Implement tree macros as inline functions so they can be
called from gdb.
As discussed before, several of these changes do not fully change
the call sites to use the new APIs.
The bootstrap changes have already been tested on a wide range of
targets (http://gcc.gnu.org/wiki/CppBuildStatus). Additionally,
I have tested the merged trunk on: x86_64-unknown-linux-gnu,
mips64el-unknown-linux-gnu, powerpc64-unknown-linux-gnu,
i686-pc-linux-gnu, and ia64-unknown-linux-gnu.
ChangeLog
2012-08-14 Diego Novillo <dnovillo@google.com>
Merge from cxx-conversion branch.
* Makefile.tpl (STAGE[+id+]_CXXFLAGS): Remove
POSTSTAGE1_CONFIGURE_FLAGS.
* Makefile.in: Regenerate.
* configure.ac (ENABLE_BUILD_WITH_CXX): Remove. Update all users.
Force C++ when bootstrapping.
* configure: Regenerate.
libcpp/ChangeLog
2012-08-14 Diego Novillo <dnovillo@google.com>
Merge from cxx-conversion branch. Configury.
* Makefile.in: Remove all handlers of ENABLE_BUILD_WITH_CXX.
* configure.ac: Likewise.
* configure: Regenerate.
2012-08-14 Lawrence Crowl <crowl@google.com>
Merge from cxx-conversion branch. New C++ hash table.
* include/symtab.h (typedef struct ht hash_table): Change the typedef
name to cpp_hash_table. Update all users of the typedef.
gcc/ChangeLog
2012-08-14 Diego Novillo <dnovillo@google.com>
Merge from cxx-conversion branch. Configury.
* configure.ac (CXX_FOR_BUILD): Define and substitute.
(BUILD_CXXFLAGS): Define.
Remove all handlers of ENABLE_BUILD_WITH_CXX.
Force all build to be with C++.
* Makefile.in (BUILD_CXXFLAGS): Use it.
Remove all handlers of ENABLE_BUILD_WITH_CXX.
* configure: Regenerate.
* config.in: Regenerate.
* doc/install.texi: Remove documentation for --enable-build-with-cxx
and --enable-build-poststage1-with-cxx.
2012-08-14 Diego Novillo <dnovillo@google.com>
Merge from cxx-conversion branch. Re-implement VEC in C++.
* vec.c (vec_heap_free): Convert into a template function.
(vec_gc_o_reserve_1): Make extern.
(vec_gc_p_reserve): Remove.
(vec_gc_p_reserve_exact): Remove.
(vec_gc_o_reserve): Remove.
(vec_gc_o_reserve_exact): Remove.
(vec_heap_o_reserve_1): Make extern.
(vec_heap_p_reserve): Remove.
(vec_heap_p_reserve_exact): Remove.
(vec_heap_o_reserve): Remove.
(vec_heap_o_reserve_exact): Remove.
(vec_stack_p_reserve): Remove.
(vec_stack_p_reserve_exact): Remove.
* vec.h (VEC_CHECK_INFO, VEC_CHECK_DECL, VEC_CHECK_PASS,
VEC_ASSERT, VEC_ASSERT_FAIL, vec_assert_fail): Move earlier
in the file.
(VEC): Define to vec_t<T>.
(vec_allocation_t): Define.
(struct vec_prefix): Move earlier in the file.
(vec_t<T>): New template.
(DEF_VEC_I, DEF_VECL_ALLOC_I, DEF_VEC_P, DEF_VEC_ALLOC_P,
DEF_VEC_O, DEF_VEC_ALLOC_P, DEF_VEC_O, DEF_VEC_ALLOC_O,
DEF_VEC_ALLOC_P_STACK, DEF_VEC_ALLOC_O_STACK,
DEF_VEC_ALLOC_I_STACK): Expand to 'struct vec_swallow_trailing_semi'.
(DEF_VEC_A): Provide template instantiations for
GC/PCH markers that do not traverse the vector.
(vec_stack_p_reserve): Remove.
(vec_stack_p_reserve_exact): Remove.
(vec_stack_p_reserve_exact_1): Remove.
(vec_stack_o_reserve): Remove.
(vec_stack_o_reserve_exact): Remove.
(vec_stack_free): Re-write as a template function.
(vec_reserve): New template function.
(vec_reserve_exact): New template function.
(vec_heap_free): New template function if GATHER_STATISTICS is
defined. Otherwise, macro that expands to free().
(VEC_length_1): New template function.
(VEC_length): Call it.
(VEC_empty_1): New template function.
(VEC_empty): Call it.
(VEC_address_1): New template function.
(VEC_address): Call it.
(VEC_last_1): New template function.
(VEC_last): Call it. Change return type to T&.
Change all users that used VEC_Os.
(VEC_index_1): New template function.
(VEC_index): Call it. Return a T& instead of a T*.
Update all callers that were using VEC_O before.
(VEC_iterate_1): New template function.
(VEC_iterate): Call it.
(VEC_embedded_size_1): New template function.
(VEC_embedded_size): Call it.
(VEC_embedded_init_1): New template function.
(VEC_embedded_init): Call it.
(VEC_alloc_1): New template function.
(VEC_alloc): Call it. If A is 'stack', call XALLOCAVAR to
do the allocation.
(VEC_free_1): New template function.
(VEC_free): Call it.
(VEC_copy_1): New template function.
(VEC_copy): Call it.
(VEC_space_1): New template function
(VEC_space): Call it.
(VEC_reserve_1): New template function.
(VEC_reserve): Call it.
(VEC_reserve_exact_1): New template function.
(VEC_reserve_exact): Call it.
(VEC_splice_1): New template function.
(VEC_splice): Call it.
(VEC_safe_splice_1): New template function.
(VEC_safe_splice): Call it.
(VEC_quick_push_1): New template function. Create two overloads, one
accepting T, the other accepting T *. Update all callers
where T and T * are ambiguous.
(VEC_quick_push): Call it.
(VEC_safe_push_1): New template function. Create two overloads, one
accepting T, the other accepting T *. Update all callers
where T and T * are ambiguous.
(VEC_safe_push): Call it.
(VEC_pop_1): New template function.
(VEC_pop): Call it.
(VEC_truncate_1): New template function.
(VEC_truncate): Call it.
(VEC_safe_grow_1): New template function.
(VEC_safe_grow): Call it.
(VEC_safe_grow_cleared_1): New template function.
(VEC_safe_grow_cleared): Call it.
(VEC_replace_1): New template function.
(VEC_replace): Call it. Always accept T instead of T*.
Update all callers that used VEC_Os.
(VEC_quick_insert_1): New template function.
(VEC_quick_insert): Call it.
(VEC_safe_insert_1): New template function.
(VEC_safe_insert): Call it.
(VEC_ordered_remove_1): New template function.
(VEC_ordered_remove): Call it.
(VEC_unordered_remove_1): New template function.
(VEC_unordered_remove): Call it.
(VEC_block_remove_1): New template function.
(VEC_block_remove): Call it.
(VEC_lower_bound_1): New template function.
(VEC_lower_bound): Call it.
(VEC_OP): Remove.
(DEF_VEC_FUNC_P): Remove.
(DEF_VEC_ALLOC_FUNC_P): Remove.
(DEF_VEC_NONALLOC_FUNCS_P): Remove.
(DEF_VEC_FUNC_O): Remove.
(DEF_VEC_ALLOC_FUNC_O): Remove.
(DEF_VEC_NONALLOC_FUNCS_O): Remove.
(DEF_VEC_ALLOC_FUNC_I): Remove.
(DEF_VEC_NONALLOC_FUNCS_I): Remove.
(DEF_VEC_ALLOC_FUNC_P_STACK): Remove.
(DEF_VEC_ALLOC_FUNC_O_STACK): Remove.
(DEF_VEC_ALLOC_FUNC_I_STACK): Remove.
(vec_reserve_exact): New template function.
* gengtype-lex.l (DEF_VEC_ALLOC_[IOP]/{EOID}): Remove.
* gengtype-parse.c (token_names): Remove DEF_VEC_ALLOC_[IOP].
(typedef_name): Emit vec_t<C1> instead of VEC_C1_C2.
(def_vec_alloc): Remove. Update all callers.
* gengtype.c (filter_type_name): New.
(output_mangled_typename): Call it.
(write_func_for_structure): Likewise.
(write_types): Likewise.
(write_root): Likewise.
(write_typed_alloc_def): Likewise.
(note_def_vec): Emit vec_t<TYPE_NAME> instead of VEC_TYPE_NAME_base.
(note_def_vec_alloc): Remove.
* gengtype.h (note_def_vec_alloc): Remove.
(DEFVEC_ALLOC): Remove token code.
* df-scan.c (df_bb_verify): Remove call to df_free_collection_rec
inside the insn traversal loop.
* gimplify.c (gimplify_compound_lval): Rename STACK to EXPR_STACK.
* ipa-inline.c (inline_small_functions): Rename HEAP to EDGE_HEAP.
* reg-stack.c (stack): Rename to STACK_PTR. Update all users.
* tree-vrp.c (stack): Rename to EQUIV_STACK. Update all users.
* config/bfin/bfin.c (hwloop_optimize): Update some calls to
VEC_* for vectors of non-pointers.
* config/c6x/c6x.c (try_rename_operands): Likewise.
(reshuffle_units): Likewise.
* config/mips/mips.c (mips_multi_start): Likewise.
(mips_multi_add): Likewise.
(mips_multi_copy_insn): Likewise.
(mips_multi_set_operand): Likewise.
* hw-doloop.c (discover_loop): Likewise.
(discover_loops): Likewise.
(reorg_loops): Likewise.
2012-08-14 Diego Novillo <dnovillo@google.com>
Merge from cxx-conversion branch. C++ support in gengtype.
* coretypes.h (gt_pointer_operator): Move from ...
* ggc.h: ... here.
* doc/gty.texi: Document support for C++ templates and
user-provided markers.
* gcc/gengtype-lex.l: Update copyright year.
Remove support for recognizing DEF_VEC_O, DEF_VEC_P and
DEFVEC_I.
* gengtype-parse.c: Update copyright year.
(token_names): Remove DEF_VEC_O, DEF_VEC_P and DEF_VEC_I.
(require_template_declaration): New.
(typedef_name): Call it.
(type): Replace IS_UNION with KIND. Replace all users.
(def_vec): Remove. Update all users.
* gengtype-state.c (type_lineloc): Handle TYPE_USER_STRUCT.
(write_state_user_struct_type): New.
(write_state_type): Call it.
(read_state_user_struct_type): New.
(read_state_type): Call it.
* gengtype.c: Update copyright year.
(dump_pair): Move declaration to the top.
(dump_type): Likewise.
(dump_type_list): Likewise.
(dbgprint_count_type_at): Handle TYPE_USER_STRUCT.
(create_user_defined_type): New.
(resolve_typedef): Call it.
(new_structure): Replace argument ISUNION with KIND.
Change users to refer to KIND directly.
Update all callers.
(find_structure): Likewise.
(set_gc_used_type): Handle TYPE_USER_STRUCT.
(create_file): Update HDR to include new copyright year.
(struct walk_type_data): Add field IN_PTR_FIELD.
(output_mangled_typename): Handle TYPE_USER_STRUCT.
(walk_type): Set D->IN_PTR_FIELD when walking a TYPE_POINTER.
Clear it afterwards.
Handle TYPE_USER_STRUCT.
(write_types_process_field): Handle TYPE_USER_STRUCT.
(get_type_specifier): Move earlier in the file.
(write_type_decl): New.
(write_marker_function_name): New.
(write_user_func_for_structure_ptr): New.
(write_user_func_for_structure_body): New.
(write_user_marking_functions): New.
(write_func_for_structure): Call write_marker_function_name
and write_type_decl.
Do not call walk_type for TYPE_USER_STRUCT. Emit a call to the user
function directly.
Call write_user_marking_functions on TYPE_USER_STRUCTs.
(write_types_local_user_process_field): New.
(write_pch_user_walking_for_structure_body): New.
(write_pch_user_walking_functions): New.
(write_types_local_process_field): Handle TYPE_USER_STRUCT.
(write_local_func_for_structure): Do not call walk_type for
TYPE_USER_STRUCT. Instead, emit the call to gt_pch_nx directly.
Call write_pch_user_walking_functions for TYPE_USER_STRUCTs.
(write_root): Handle TYPE_USER_STRUCT.
(vec_prefix_type): Remove. Update all users.
(note_def_vec): Remove. Update all users.
(dump_typekind): Handle TYPE_USER_STRUCT.
(dump_type): Initialize SEEN_TYPES, if needed.
Handle TYPE_USER_STRUCT.
(dump_everything): Do not initialize SEEN_TYPES.
* gengtype.h: Update copyright year.
(enum typekind): Add TYPE_USER_STRUCT.
(union_or_struct_p): Rename from UNION_OR_STRUCT_P.
Convert into function.
Add an overload taking const_type_p.
Update all callers.
(new_structure): Change second field to type enum typekind.
Update all users.
(find_structure): Likewise.
(note_def_vec): Remove.
(DEFVEC_OP): Remove.
(DEFVEC_I): Remove.
* ggc-page.c (gt_ggc_mx): Add entry points for marking
'const char *&', 'unsigned char *&' and 'unsigned char&'.
* ggc-zone.c (gt_ggc_mx): Add entry points for marking
'const char *&' and 'unsigned char *&'.
* stringpool.c (gt_pch_nx): Add entry points for marking
'const char *&', 'unsigned char *&' and 'unsigned char&'.
Add an entry point for the overload taking arguments 'unsigned char
*', 'gt_pointer_operator' and 'void *'.
* vec.h (struct vec_prefix): Remove GTY marker.
(struct vec_t): Remove GTY((length)) attribute from field 'vec'.
(gt_ggc_mx (vec_t<T> *)): New template function.
(gt_pch_nx (vec_t<T> *)): New template function.
(gt_pch_nx (vec_t<T *> *, gt_pointer_operator, void *)): New template
function.
(gt_pch_nx (vec_t<T> *, gt_pointer_operator, void *)): New template
function.
* basic-block.h (struct edge_def): Mark GTY((user)).
Remove all GTY markers from fields.
(gt_ggc_mx): Declare.
(gt_pch_nx): Declare.
* tree-cfg.c (gt_ggc_mx): New.
(gt_pch_nx): New.
* gengtype-lex.l (USER_GTY): Add pattern for "user".
* gengtype-parse.c (option): Handle USER_GTY.
(opts_have): New.
(type): Call it.
If the keyword 'user' is used, do not walk the fields
of the structure.
* gengtype.h (USER_GTY): Add.
* doc/gty.texi: Update.
2012-08-14 Lawrence Crowl <crowl@google.com>
Merge cxx-conversion branch. Implement C++ hash table.
* hash-table.h: New. Implementation borrowed from libiberty/hashtab.c.
* hash-table.c: Likewise.
* tree-ssa-tail-merge.c: Include hash-table.h instead of hashtab.h.
(static htab_t same_succ_htab): Change type to hash_table;
move specification of helper functions from create call to declaration.
Change users to invoke member functions.
(same_succ_print_traverse): Make extern ssa_.... Change callers.
Remove void* casting.
(same_succ_hash): Likewise.
(same_succ_equal): Likewise.
(same_succ_delete): Likewise.
* tree-ssa-threadupdate.c: Include hash-table.h.
(struct local_info): Rename to ssa_local_info_t to avoid overloading
the type name local_info with the variable name local_info.
(static htab_t redirection_data): Change type to hash_table.
Move specification of helper functions from create call to declaration.
Change users to invoke member functions.
(redirection_data_hash): Make extern ssa_.... Change callers.
Remove void* casting.
(redirection_data_eq): Likewise.
(fix_duplicate_block_edges): Likewise.
(create_duplicates): Likewise.
(fixup_template_block): Likewise.
(redirect_edges): Likewise.
(lookup_redirection_data): Change types associated with the hash table
from void* to their actual type. Remove unnecessary casts.
* tree-ssa-ccp.c: Include hash-table.h.
(typedef gimple_htab): New. Uses hash_table. Replace specific uses
of htab_t with gimple_htab. Change users to invoke member functions.
Move specification of helper functions from create call to declaration.
* tree-ssa-coalesce.c: Include hash-table.h instead of hashtab.h.
(hash_ssa_name_by_var): Make extern. Remove void* casting.
(eq_ssa_name_by_var): Likewise.
(coalesce_ssa_name): Change type of local static htab_t ssa_name_hash
to hash_table. Change users to invoke member functions.
Move specification of helper functions from create call to declaration.
* coverage.c: Include hash-table.h instead of hashtab.h.
(static htab_t counts_hash): Change type to hash_table;
move specification of helper functions from create call to declaration.
Change users to invoke member functions.
(htab_counts_entry_hash): Make extern. Rename with coverage_... instead
of htab_... Remove void* casting.
(htab_counts_entry_eq): Likewise.
(htab_counts_entry_del): Likewise.
* tree-ssa-pre.c: Include hash-table.h instead of hashtab.h.
(static htab_t expression_to_id): Change type to hash_table.
Move specification of helper functions from create call to declaration.
Change users to invoke member functions.
(static htab_t phi_translate_table): Likewise.
(pre_expr_eq): Make extern ssa_.... Change callers.
Remove void* casting.
(pre_expr_hash): Likewise.
(expr_pred_trans_hash): Likewise.
(expr_pred_trans_eq): Likewise.
(alloc_expression_id): Change types associated with the hash table
from void* to their actual type. Remove unnecessary casts.
(lookup_expression_id): Likewise.
(phi_trans_lookup): Likewise.
(phi_trans_add): Likewise.
* stringpool.c: Rename uses of libcpp typedef hash_table to
cpp_hash_table.
* Makefile.in: Add hash-table.o to OBJS-libcommon-target.
Add $(HASH_TABLE_H). Add new dependences on $(HASH_TABLE_H).
2012-08-14 Lawrence Crowl <crowl@google.com>
Merge from cxx-conversion branch. Re-write double_int in C++.
* hash-table.h
(typedef double_int): Change to struct (POD).
(double_int::make): New overloads for int to double-int conversion.
(double_int::mask): New.
(double_int::max_value): New.
(double_int::min_value): New.
(double_int::operator ++): New.
(double_int::operator --): New.
(double_int::operator *=): New.
(double_int::operator +=): New.
(double_int::operator -=): New.
(double_int::to_signed): New.
(double_int::to_unsigned): New.
(double_int::fits_unsigned): New.
(double_int::fits_signed): New.
(double_int::fits): New.
(double_int::trailing_zeros): New.
(double_int::popcount): New.
(double_int::multiple_of): New.
(double_int::set_bit): New.
(double_int::mul_with_sign): New.
(double_int::operator * (binary)): New.
(double_int::operator + (binary)): New.
(double_int::operator - (binary)): New.
(double_int::operator - (unary)): New.
(double_int::operator ~ (unary)): New.
(double_int::operator & (binary)): New.
(double_int::operator | (binary)): New.
(double_int::operator ^ (binary)): New.
(double_int::and_not): New.
(double_int::lshift): New.
(double_int::rshift): New.
(double_int::alshift): New.
(double_int::arshift): New.
(double_int::llshift): New.
(double_int::lrshift): New.
(double_int::lrotate): New.
(double_int::rrotate): New.
(double_int::div): New.
(double_int::sdiv): New.
(double_int::udiv): New.
(double_int::mod): New.
(double_int::smod): New.
(double_int::umod): New.
(double_int::divmod): New.
(double_int::sdivmod): New.
(double_int::udivmod): New.
(double_int::ext): New.
(double_int::zext): New.
(double_int::sext): New.
(double_int::is_zero): New.
(double_int::is_one): New.
(double_int::is_minus_one): New.
(double_int::is_negative): New.
(double_int::cmp): New.
(double_int::ucmp): New.
(double_int::scmp): New.
(double_int::ult): New.
(double_int::ugt): New.
(double_int::slt): New.
(double_int::sgt): New.
(double_int::max): New.
(double_int::smax): New.
(double_int::umax): New.
(double_int::min): New.
(double_int::smin): New.
(double_int::umin): New.
(double_int::operator ==): New.
(double_int::operator !=): New.
(shwi_to_double_int): Change implementation to use member function.
(double_int_minus_one): Likewise.
(double_int_zero): Likewise.
(double_int_one): Likewise.
(double_int_two): Likewise.
(double_int_ten): Likewise.
(uhwi_to_double_int): Likewise.
(double_int_to_shwi): Likewise.
(double_int_to_uhwi): Likewise.
(double_int_fits_in_uhwi_p): Likewise.
(double_int_fits_in_shwi_p): Likewise.
(double_int_fits_in_hwi_p): Likewise.
(double_int_mul): Likewise.
(double_int_mul_with_sign): Likewise.
(double_int_add): Likewise.
(double_int_sub): Likewise.
(double_int_neg): Likewise.
(double_int_div): Likewise.
(double_int_sdiv): Likewise.
(double_int_udiv): Likewise.
(double_int_mod): Likewise.
(double_int_smod): Likewise.
(double_int_umod): Likewise.
(double_int_divmod): Likewise.
(double_int_sdivmod): Likewise.
(double_int_udivmod): Likewise.
(double_int_multiple_of): Likewise.
(double_int_setbit): Likewise.
(double_int_ctz): Likewise.
(double_int_not): Likewise.
(double_int_ior): Likewise.
(double_int_and): Likewise.
(double_int_and_not): Likewise.
(double_int_xor): Likewise.
(double_int_lshift): Likewise.
(double_int_rshift): Likewise.
(double_int_lrotate): Likewise.
(double_int_rrotate): Likewise.
(double_int_cmp): Likewise.
(double_int_scmp): Likewise.
(double_int_ucmp): Likewise.
(double_int_max): Likewise.
(double_int_smax): Likewise.
(double_int_umax): Likewise.
(double_int_min): Likewise.
(double_int_smin): Likewise.
(double_int_umin): Likewise.
(double_int_ext): Likewise.
(double_int_sext): Likewise.
(double_int_zext): Likewise.
(double_int_mask): Likewise.
(double_int_max_value): Likewise.
(double_int_min_value): Likewise.
(double_int_zero_p): Likewise.
(double_int_one_p): Likewise.
(double_int_minus_one_p): Likewise.
(double_int_equal_p): Likewise.
(double_int_popcount): Likewise.
* hash-table.c
(double_int_mask): Reuse implementation for double_int::mask.
(double_int_max_value): Likewise.
(double_int_min_value): Likewise.
(double_int_ext): Likewise.
(double_int_zext): Likewise.
(double_int_sext): Likewise.
(double_int_mul_with_sign): Likewise.
(double_int_divmod): Likewise.
(double_int_sdivmod): Likewise.
(double_int_udivmod): Likewise.
(double_int_div): Likewise.
(double_int_sdiv): Likewise.
(double_int_udiv): Likewise.
(double_int_mod): Likewise.
(double_int_smod): Likewise.
(double_int_umod): Likewise.
(double_int_multiple_of): Likewise.
(double_int_lshift): Likewise.
(double_int_rshift): Likewise.
(double_int_lrotate): Likewise.
(double_int_rrotate): Likewise.
(double_int_cmp): Likewise.
(double_int_ucmp): Likewise.
(double_int_scmp): Likewise.
(double_int_max): Likewise.
(double_int_smax): Likewise.
(double_int_umax): Likewise.
(double_int_min): Likewise.
(double_int_smin): Likewise.
(double_int_umin): Likewise.
(double_int_min): Likewise.
(double_int_min): Likewise.
(double_int_min): Likewise.
(double_int_min): Likewise.
(double_int_min): Likewise.
(double_int_min): Likewise.
(double_int::alshift): New.
(double_int::arshift): New.
(double_int::llshift): New.
(double_int::lrshift): New.
(double_int::ult): New.
(double_int::ugt): New.
(double_int::slt): New.
(double_int::sgt): New.
(double_int_setbit): Reuse implementation for double_int::set_bit,
which avoids a name conflict with a macro.
(double_int_double_int_ctz): Reuse implementation for
double_int::trailing_zeros.
(double_int_fits_in_shwi_p): Reuse implementation for
double_int::fits_signed.
(double_int_fits_in_hwi_p): Reuse implementation for double_int::fits.
(double_int_mul): Reuse implementation for binary
double_int::operator *.
(double_int_add): Likewise.
(double_int_sub): Likewise.
(double_int_neg): Reuse implementation for unary
double_int::operator -.
(double_int_max_value): Likewise.
* fixed-value.c: Change to use member functions introduced above.
2012-08-14 Lawrence Crowl <crowl@google.com>
Merge cxx-conversion branch. Support tree macro calling
from gdb.
* tree.h (tree_check): New.
(TREE_CHECK): Use inline function above instead of __extension__.
(tree_not_check): New.
(TREE_NOT_CHECK): Use inline function above instead of __extension__.
(tree_check2): New.
(TREE_CHECK2): Use inline function above instead of __extension__.
(tree_not_check2): New.
(TREE_NOT_CHECK2): Use inline function above instead of __extension__.
(tree_check3): New.
(TREE_CHECK3): Use inline function above instead of __extension__.
(tree_not_check3): New.
(TREE_NOT_CHECK3): Use inline function above instead of __extension__.
(tree_check4): New.
(TREE_CHECK4): Use inline function above instead of __extension__.
(tree_not_check4): New.
(TREE_NOT_CHECK4): Use inline function above instead of __extension__.
(tree_check5): New.
(TREE_CHECK5): Use inline function above instead of __extension__.
(tree_not_check5): New.
(TREE_NOT_CHECK5): Use inline function above instead of __extension__.
(contains_struct_check): New.
(CONTAINS_STRUCT_CHECK): Use inline function above instead of
__extension__.
(tree_class_check): New.
(TREE_CLASS_CHECK): Use inline function above instead of __extension__.
(tree_range_check): New.
(TREE_RANGE_CHECK): Use inline function above instead of __extension__.
(omp_clause_subcode_check): New.
(OMP_CLAUSE_SUBCODE_CHECK): Use inline function above instead of
__extension__.
(omp_clause_range_check): New.
(OMP_CLAUSE_RANGE_CHECK): Use inline function above instead of
__extension__.
(expr_check): New.
(EXPR_CHECK): Use inline function above instead of __extension__.
(non_type_check): New.
(NON_TYPE_CHECK): Use inline function above instead of __extension__.
(tree_vec_elt_check): New.
(TREE_VEC_ELT_CHECK): Use inline function above instead of
__extension__.
(omp_clause_elt_check): New.
(OMP_CLAUSE_ELT_CHECK): Use inline function above instead of
__extension__.
(tree_operand_check): New.
(TREE_OPERAND_CHECK): Use inline function above instead of
__extension__.
(tree_operand_check_code): New.
(TREE_OPERAND_CHECK_CODE): Use inline function above instead of
__extension__.
(TREE_CHAIN): Simplify implementation.
(TREE_TYPE): Simplify implementation.
(tree_operand_length): Move for compilation dependences.
* gdbinit.in: (macro define __FILE__): New.
(macro define __LINE__): New.
(skip "tree.h"): New.
gcc/cp/ChangeLog
2012-08-14 Diego Novillo <dnovillo@google.com>
Merge from cxx-conversion branch. Re-write VEC in C++.
* call.c (add_function_candidate): Remove const qualifier
from call to VEC_index.
2012-08-14 Diego Novillo <dnovillo@google.com>
Merge from cxx-conversion branch. Configury.
* go-c.h: Remove all handlers of ENABLE_BUILD_WITH_CXX.
* go-gcc.cc: Likewise.
* go-system.h: Likewise.
From-SVN: r190402
toplevel/
* Makefile.tpl (gcc-no-fixedincludes): Rename into ...
(gcc-install-no-fixedincludes): Now forwarder to local target in gcc/
(install-no-fixedincludes): Adjust accordingly.
* Makefile.in: Regenerate.
gcc/
* Makefile.in (install-no-fixedincludes): New target, former toplevel
gcc-no-fixedincludes. Stash "include-fixed" in addition to "include".
Add comments and improve stamp preservation across the whole sequence.
(stmp-int-hdrs): Use move-if-change + cp -p to setup fix_dir/limits.h.
From-SVN: r187594
Iain Sandoe
Michael Forney
Richard Biener
Martin Liska
Andi Kleen
Iain Buclaw
Alexandre Oliva
Eric Botcazou
Thomas Schwinge
Matthias Klose
Andrew Haley
Alan Modra
Segher Boessenkool
Aditya Kumar
Mikhail Maltsev
Sebastian Pop
Ian Lance Taylor
Jason Merrill
Jason Merrill
Bernhard Reutner-Fischer
Max Ostapenko
Andrew Pinski
Jakub Jelinek
Yury Gribov
Tobias Burnus
Roman Gareev
Jeff Law
Eric Botcazou
Diego Novillo
Olivier Hainque
Roland McGrath