* dbxout.c, mips-tfile.c, config/mips/mips.c, xcoffout.c:
Always include gstab.h, not system stab.h. Don't provide
default definitions of N_CATCH or N_OPT. Always use the
gstab.h variant of STAB_CODE_TYPE.
* final.c: Don't include stab.h/gstab.h at all, or provide
defaults for N_SLINE and N_SOL.
* xcoffout.c: Can assume N_MAIN, N_DSLINE, N_BSLINE, N_BINCL,
N_EINCL, N_EXCL, N_M2C, N_SCOPE, N_CATCH, and N_OPT are
available.
* sdbout.c: Always include gsyms.h instead of system syms.h.
* configure.in: No need to check for stab.h.
* configure, config.in: Regenerate.
* Makefile.in (final.o): Don't depend on gstab.h.
From-SVN: r41713
2001-04-03 Jakub Jelinek <jakub@redhat.com>
David S. Miller <davem@pierdol.cobaltmicro.com>
Andrew MacLeod <amacleod@redhat.com>
Use byte offsets in SUBREGs instead of words.
* alias.c (nonlocal_mentioned_p): Use subreg_regno function.
* caller-save.c (mark_set_regs): Change callers of subreg_hard_regno
to pass new argument.
(add_stored_regs): Use subreg_regno_offset function.
* calls.c (expand_call): For non-paradoxical SUBREG take endianess
into account.
(precompute_arguments): Use gen_lowpart_SUBREG.
* combine.c (try_combine): Replace explicit XEXP with SUBREG_REG.
(combine_simplify_rtx): Rework to use SUBREG_BYTE.
(simplify_set): Rework to use SUBREG_BYTE.
(expand_field_assignment): Use SUBREG_BYTE.
(make_extraction): Use SUBREG_BYTE.
(if_then_else_cond): Use SUBREG_BYTE.
(apply_distributive_law): Use SUBREG_BYTE and fixup subreg comments.
(gen_lowpart_for_combine): Compute full byte offset.
* cse.c (mention_regs): Use SUBREG_BYTE.
(remove_invalid_subreg_refs): Rework to use SUBREG_BYTE.
(canon_hash): Use SUBREG_BYTE.
(fold_rtx): Pass SUBREG_BYTE div UNITS_PER_WORD to operand_subword.
(gen_lowpart_if_possible): Formatting.
* dbxout.c (dbxout_symbol_location): Compute SUBREG hard regnos
correctly.
* dwarf2out.c (is_pseudo_reg): Fixup explicit XEXP into SUBREG_REG
(mem_loc_descriptor): Fixup explicit XEXP into SUBREG_REG
(loc_descriptor): Fixup explicit XEXP into SUBREG_REG
* dwarfout.c (is_pseudo_reg): Fixup explicit XEXP into SUBREG_REG
(output_mem_loc_descriptor): Fixup explicit XEXP into SUBREG_REG
(output_loc_descriptor): Fixup explicit XEXP into SUBREG_REG
* emit-rtl.c (gen_rtx_SUBREG): New function, used to verify
certain invariants about SUBREGs the compiler creates.
(gen_lowpart_SUBREG): New function.
(subreg_hard_regno): New function to get the final register number.
(gen_lowpart_common): Use SUBREG_BYTE.
(gen_imagpart): Spacing nits.
(subreg_realpart_p): Use SUBREG_BYTE.
(gen_highpart): Use SUBREG_BYTE.
(subreg_lowpart_p): Always compute endian corrected goal offset,
even at the byte level, then compare against that.
(constant_subword): New function, pulled out all constant cases
from operand_subword and changed second argument name to offset.
(operand_subword): Detect non REG/SUBREG/CONCAT/MEM cases early
and call constant_subword to do the work. Return const0_rtx if
looking for a word outside of OP.
(operand_subword_force): Change second arg name to offset.
* expmed.c (store_bit_field): Use SUBREG_BYTE.
(store_split_bit_field): Use SUBREG_BYTE.
(extract_bit_field): Use SUBREG_BYTE.
(extract_split_bit_field): Use SUBREG_BYTE.
(expand_shift): Use SUBREG_BYTE.
* expr.c (store_expr, expand_expr): Use gen_lowpart_SUBREG.
* final.c (alter_subreg) Use subreg_hard_regno and SUBREG_BYTE.
* flow.c (set_noop_p): Use SUBREG_BYTE.
(mark_set_1): Remove ALTER_HARD_SUBREG. Use subreg_regno_offset instead.
* function.c (fixup_var_refs_1): Fixup explicit XEXP into a SUBREG_REG.
(fixup_memory_subreg): Use SUBREG_BYTE and remove byte endian
correction code.
(optimize_bit_field): Use SUBREG_BYTE.
(purge_addressof_1): Use SUBREG_BYTE.
(purge_single_hard_subreg_set): Use subreg_regno_offset function.
(assign_params): Mark arguments SUBREG_PROMOTED_VAR_P if they are
actually promoted by the caller and PROMOTE_FOR_CALLS_ONLY is true.
* gengenrtl.c (special_rtx): Add SUBREG.
* global.c (mark_reg_store): Use SUBREG_BYTE.
(set_preference): Rework to use subreg_regno_offset and SUBREG_BYTE.
* ifcvt (noce_emit_move_insn): Use SUBREG_BYTE.
* integrate.c (copy_rtx_and_substitute): Use SUBREG_BYTE and make sure
final byte offset is congruent to subreg's mode size.
(subst_constants): Use SUBREG_BYTE.
(mark_stores): Use subreg_regno_offset function.
* jump.c (rtx_renumbered_equal_p, true_regnum): Use subreg_regno_offset
function and SUBREG_BYTE.
* local-alloc.c (combine_regs): Use subreg_regno_offset function.
(reg_is_born): Use subreg_hard_regno.
* recog.c (valid_replace_rtx_1): Use SUBREG_BYTE and remove byte
endian correction code. Don't combine subregs unless resulting
offset aligns with type. Fix subreg constant extraction for DImode.
Simplify SUBREG of VOIDmode CONST_DOUBLE.
(general_operand): Remove dead mode_altering_drug code.
(indirect_operand): Use SUBREG_BYTE.
(constrain_operands): Use subreg_regno_offset function.
* reg-stack.c (get_true_reg): Use subreg_regno_offset function.
* regmove.c (regmove_optimize): Use SUBREG_BYTE.
(optimize_reg_copy_3): Use gen_lowpart_SUBREG.
* regs.h (REG_SIZE): Allow target to override.
(REGMODE_NATURAL_SIZE): New macro which target can override.
* reload.c (reload_inner_reg_of_subreg): subreg_regno should be used
on the entire subreg rtx.
(push_reload): Use SUBREG_BYTE in comments and code.
(find_dummy_reload): Use subreg_regno_offset. Only adjust offsets
for hard registers inside subregs.
(operands_match_p): Use subreg_regno_offset.
(find_reloads): Use SUBREG_BYTE and only advance offset for subregs
containing hard regs.
(find_reload_toplev): Use SUBREG_BYTE. Remove byte endian
corrections when fixing up MEM subregs.
(find_reloads_address_1): Use SUBREG_BYTE, subreg_regno, and
subreg_regno_offset where appropriate.
(find_reloads_subreg_address): Use SUBREG_BYTE. Remove
byte endian corrections when fixing up MEM subregs.
(subst_reloads): When combining two subregs, make sure final
offset is congruent to subreg's mode size.
(find_replacement): Use SUBREG_BYTE and subreg_regno_offset.
(refers_to_regno_for_reload_p): Use subreg_regno.
(reg_overlap_mentioned_for_reload_p): Use subreg_regno_offset.
* reload1.c (eliminate_regs) Use SUBREG_BYTE. Remove byte endian
correction code for memory subreg fixups.
(forget_old_reload_1): Use subreg_regno_offset.
(choose_reload_regs): Use subreg_regno.
(emit_input_reload_insns): Use SUBREG_BYTE.
(reload_combine_note_store): Use subreg_regno_offset.
(move2add_note_store): Use subreg_regno_offset.
* resource.c (update_live_status, mark_referenced_resources): Use
subreg_regno function.
(mark_set_resources): Use subreg_regno function.
* rtl.h (SUBREG_WORD): Rename to SUBREG_BYTE.
(subreg_regno_offset, subreg_regno): Define prototypes.
(subreg_hard_regno, constant_subword, gen_rtx_SUBREG): Newi functions.
(gen_lowpart_SUBREG): Add prototype.
* rtl.texi (subreg): Update to reflect new byte offset representation.
Add mentioning of the effect that BYTES_BIG_ENDIAN has on subregs now.
* rtlanal.c (refers_to_regno_p): Use subreg_regno.
(reg_overlap_mentioned_p): Use subreg_regno.
(replace_regs); Make sure final offset of combined subreg is
congruent to size of subreg's mode.
(subreg_regno_offset): New function.
(subreg_regno): New function.
* sched-vis.c (print_value): Change SUBREG_WORD to SUBREG_BYTE.
* sdbout.c (sdbout_symbol): Compute offset using alter_subreg.
* stmt.c (expand_anon_union_decl): Use gen_lowpart_SUBREG.
* tm.texi (ALTER_HARD_SUBREG): Remove, it is now dead.
(SUBREG_REGNO_OFFSET): Describe SUBREG_REGNO_OFFSET overrides.
* config/a29k/a29k.c (gpc_reg_operand): Use subreg_regno.
(a29k_get_reloaded_address): Use SUBREG_BYTE.
(print_operand): Use SUBREG_BYTE.
* config/alpha/alpha.c (print_operand_address): Use SUBREG_BYTE.
* config/arm/arm.c (arm_reload_in_hi): Use SUBREG_BYTE.
(arm_reload_out_hi): Use SUBREG_BYTE.
* config/d30v/d30v.c (d30v_split_double): Use subreg_regno_offset
instead of SUBREG_WORD.
(d30v_print_operand_memory_reference): Use subreg_regno_offset.
* config/dsp16xx/dsp16xx.md (extendqihi2, zero_extendqihi2): Fix
SUBREG creation to use byte offset.
* config/h8300/h8300.md (Unnamed HImode zero extraction and 16bit
inverted load insns): Fix explicit rtl subregs to use byte
offsets.
* config/i370/i370.md (cmpstrsi, movstrsi, mulsi3, divsi3,
udivsi3, umodsi3): Generate SUBREGs with byte offsets.
* config/i860/i860.c (single_insn_src_p): Use SUBREG_BYTE.
* config/i860/i860.md (mulsi3_big): Fixup explicit SUBREGs in rtl
to use byte offsets.
(unnamed fmlow.dd insn): Fixup SUBREGS to use byte offsets.
* config/i960/i960.md (extendhisi2): Generate SUBREGs with byte
offsets, also make sure it is congruent to SUBREG's mode size.
(extendqisi2, extendqihi2, zero_extendhisi2, zero_extendqisi2,
unnamed ldob insn): Generate SUBREGs with byte offset.
(zero_extendqihi2): SUBREG's are byte offsets.
* config/m68hc11/m68hc11.c (m68hc11_gen_lowpart): Use SUBREG_BYTE.
(m68hc11_gen_highpart): Use SUBREG_BYTE.
* config/m68k/m68k.md (zero_extendhisi2, zero_extendqihi2,
zero-extendqisi2): Generate SUBREGs with byte offset.
(umulsidi3, mulsidi3, subreghi1ashrdi_const32,
subregsi1ashrdi_const32, subreg1lshrdi_const32): Fixup explicit
subregs in rtl to use byte offsets.
* config/m88k/m88k.md (extendsidi2): fixup subregs to use byte offset.
* config/mips/mips.c (mips_move_1word): Use subreg_regno_offset.
(mips_move_2words): Use subreg_regno_offset.
(mips_secondary_reload_class): Use subreg_regno_offset.
* config/mips/mips.md (DImode plus, minus, move, and logical op
splits): Fixup explicit subregs in rtl to use byte offsets.
* config/mn10200/mn10200.c (print_operand): Use subreg_regno function.
* config/mn10300/mn10300.c (print_operand): Use subreg_regno function.
* config/ns32k/ns32k.md (udivmoddisi4): Fix explicit subregs in
rtl to use byte offsets.
* config/pa/pa.c (emit_move_sequence): Use SUBREG_BYTE.
* config/pa/pa.md (floatunssisf2, floatunssidf2, mulsi3): fix explicit
subregs to use byte offsets.
* config/pdp11/pdp11.md (zero_extendhisi2, modhi3, modhi3+1):
Fixup explicit subregs in rtl to use byte offsets.
* config/romp/romp.c (memory_offset_in_range_p): Use SUBREG_BYTE
and remove byte endian correction code.
* config/sh/sh.c (output_movedouble): Use subreg_regno.
(gen_ashift_hi): Use SUBREG_BYTE.
(regs_used): Use subreg_regno_offset.
(machine_dependent_reorg): Use subreg_regno_offset.
* config/sh/sh.h (INDEX_REGISTER_RTX_P): Use SUBREG_BYTE.
* config/sh/sh.md (DImode and DFmode move splits): Use subreg_regno.
(movdf_i4): Subregs are byte offsets now.
* config/sparc/sparc.c (ultra_find_type): Use SUBREG_BYTE.
* config/sparc/sparc.h (ALTER_HARD_SUBREG): Removed.
(REGMODE_NATURAL_SIZE): Override.
(REG_SIZE): For SUBREG check float mode on SUBREG_REG's mode.
* config/sparc/sparc.md (TFmode move splits): Generate SUBREGs
with byte offsets.
(zero_extendhisi2, zero_extendqidi2_insn, extendhisi2,
extendqihi2, sign_extendqihi2_insn, sign_extendqisi2_insn,
extendqidi2): Generate SUBREGs with byte offsets, also make sure
it is congruent to SUBREG's mode size.
(smulsi3_highpart_v8plus): Fix explicit subregs in rtl to use byte
offsets.
(cmp_siqi_trunc, cmp_siqi_trunc_set, cmp_diqi_trunc,
cmp_diqi_trunc_set, lshrdi3_v8plus+1, lshrdi3_v8plus+2,
lshrdi3_v8plus+3, lshrdi3_v8plus+4): Use proper
SUBREG_BYTE offset for non-paradoxical subregs in patterns.
* config/v850/v850.c (print_operand, output_move_double): Use
subreg_regno function.
Co-Authored-By: Andrew MacLeod <amacleod@redhat.com>
Co-Authored-By: David S. Miller <davem@pierdol.cobaltmicro.com>
From-SVN: r41058
* final.c: Revert back my previous changes.
* output.h: Make profile_label_no extern.
* config/rs6000/rs6000.c (output_profile_hook): Use standard functions
for generating label.
From-SVN: r39506
* final.c: Move the declaration profile_label_no to ...
* output.h: ... here.
* function.c (expand_function_start): Call PROFILE_HOOK.
* config/rs6000/aix.h: Define PROFILE_HOOK.
* config/rs6000/rs6000-protos.h: output_profile_hook new.
* config/rs6000/rs6000.c (output_profile_hook): Define.
(output_prolog): Do nothing for ABI_AIX as it is taken care by
output_profile_hook.
tm.texi : Explain new macro PROFILE_HOOK.
From-SVN: r39473
* final.c (output_addr_const) [LABEL_REF]: Simplify.
[MINUS]: Enclose non-CONST_INTs in parentheses.
[default]: Try OUTPUT_ADDR_CONST_EXTRA.
* tm.texi (OUTPUT_ADDR_CONST_EXTRA): Document it.
* varasm.c (decode_rtx_const) [CONST]: If it's not something
PLUS or MINUS a CONST_INT, use the whole CONST with offset 0
instead of abort()ing.
* sh.c (output_pic_addr_const): Removed. Fixed all callers.
* sh.h (OUTPUT_ADDR_CONST_EXTRA): New. Handle the UNSPECs
formerly handled in output_pic_addr_const.
* sh.md (sym_label2reg, symPLT_label2reg): Enclose UNSPEC
operands of MINUS in CONSTs so that decode_rtx_const() will
accept them.
From-SVN: r37691
* flags.h (flag_dump_rtl_in_asm): Declare.
* toplev.c (flag_dump_rtl_in_asm): Define.
(decode_d_option): Set flag_dump_rtl_in_asm and flag_print_asm_name
if -dP is specified.
* rtl.h (print_rtx_head): Declare.
* print-rtl.c (print_rtx_head): Define.
(print_rtx): Print the string pointed to by print_rtx_head
at beginning of each dump line.
(print_rtl): Likewise.
(print_rtl_single): Likewise.
* final.c (final_scan_insn): Dump the insn in the assembly
file for debugging.
* gcc.1: Document -dP option.
* invoke.texi (Debugging Options): Likewise.
From-SVN: r36394
* Makefile.in (INSN_ATTR_H): New macro. Replace all dependencies
on insn-attr.h with it.
* genattr.c: Generate `#include "insn-addr.h"' if HAVE_ATTR_length.
* insn-addr.h: New header.
(insn_addresses_): Renamed from insn_addresses.
(INSN_ADDRESSES_DEFN, INSN_ADDRESSES, INSN_ADDRESSES_ALLOC,
INSN_ADDRESSES_FREE, INSN_ADDRESSES_SET_P, INSN_ADDRESSES_SIZE,
INSN_ADDRESSES_NEW): New macros.
* genattrtab.c (write_test_expr): Use new macros.
* final.c (insn_addresses, init_insn_lengths): Likewise.
(align_fuzz, shorten_branches): Likewise.
(final): Likewise. Do not reject new insns if their addresses
have been added to INSN_ADDRESSES.
* config/arm/arm.c, config/avr/avr.c: Use new macros.
* config/h8300/h8300.c, config/i370/i370.c: Likewise.
* config/m88k/m88k.c, config/pa/pa.c, config/pa/pa.md: Likewise.
* config/sparc/sparc.c, config/sparc/sparc.md: Likewise.
* config/sh/sh.c: Likewise.
(output_branchy_insn): Use INSN_ADDRESSES_NEW.
From-SVN: r35307
* final.c (profile_function): Do not emit profile counters in
the data section, if NO_PROFILE_COUNTERS is defined.
* tm.texi: Document NO_PROFILE_COUNTERS. Update doc for
FUNCTION_PROFILER.
* config/i386/linux.h (NO_PROFILE_COUNTERS): Define.
(FUNCTION_PROFILER): Just emit a call to mcount.
From-SVN: r35005
2000-05-25 Andrew MacLeod <amacleod@cygnus.com>
Andrew Haley <aph@cygnus.com>
* except.c (func_eh_entry): Add emitted field.
(new_eh_region_entry): Set emitted field to 0;
(output_exception_table_entry): Only emit previously un-emitted data,
and send it to the eh_data section.
(output_exception_table): Break out common parts. Output
exception table for entire compilation unit to eh_data section.
(output_exception_table_data): Common parts of output_exception_table.
Send output to eh_data section.
(output_function_exception_table): Output exception table data for
a single function to eh_data section.
(free_exception_table): New external to free the table.
* except.h (free_exception_table): Add prototype.
(output_function_exception_table): Add prototype.
* final.c (final_end_function): Output function exception table
for IA64_UNWIND_INFO.
(final_scan_insn): Emit any unwind directives for an insn.
* frame-dwarf2.c: New file containing all DWARF 2 specific code
from frame.c.
* frame.c: Remove all DWARF 2 specific code.
* config/ia64/frame-ia64.c: New file.
(gthread_stuff): Make all gthread available with
IA64_UNWIND_INFO.
(dwarf_fde): Define an IA64 struct for dwarf_fde.
(__register_frame_info, __register_frame): Move to common area of file.
(__register_frame_info_table, __register_frame_table): Move to common i
area.
(__deregister_frame_info, __deregister_frame): Move to common area.
(__frame_init, find_fde): New versions for IA64_UNWIND_INFO.
(read_uleb128): New version for ia64.
(get_unwind_record): Read the next IA-64 unwind record.
(read_R_record): Read a region header record.
(process_a_b_reg_code): X record helper.
(read_X_record): Read an X format record.
(read_B_record): Read a B format record.
(P3_record_types): List of record types matching the P3 format.
(P7_record_types): List of record types matching the P7 format.
(P8_record_types): List of record types matching the P8 format.
(read_P_record): Read a P format record.
(init_ia64_reg_loc): Set default fields for a register.
(init_ia64_unwind_frame): Set defaults for all register records.
(execute_one_ia64_descriptor): Execute one descriptor record.
(rse_address_add): Calculate the position of a local reg in memory.
(normalize_reg_loc): Turn a location descriptor into a memory address.
(maybe_normalize_reg_loc): Only normalize a descriptor if it falls
within a specified PC offset range.
(get_real_reg_value): Given a register location, retrieve its value.
(set_real_reg_value): Change the value of a register location.
(copy_reg_value): Copy reg values, if needed.
(copy_saved_reg_state): Copy all registers that need to be copied.
(process_state_between): Normalize all frame register records that
fall within the specified PC range.
(frame_translate): Take a processed frame description, and turn
everything into addresses.
(build_ia64_frame_state ): Find and create frame state record for a PC.
(get_personality): Get the personality routine for a given frame.
(get_except_table): Get the exception table for a given frame.
(record_name): Unwind record names for debugging.
(print_record): Print and unwind record.
(print_all_records): Print an entire unwind image.
(__ia64_backtrace): Print a backtrace.
(ia64_backtrace_helper): New function.
(__register_frame_info_aux): New function.
* config/ia64/crtend.asm (__do_frame_setup_aux): New function.
* frame.h (enum unw_record_type): New unwind record types.
(struct unw_p_record, unw_b_record, unw_x_record) : New unwind records.
(struct unw_r_record, unwind_record): New unwind record structs.
(struct unwind_info_ptr): Unwind information layout.
(IA64_UNW_LOC_TYPE_*): Macros for different types for location
descriptors.
(struct ia64_reg_loc): Register location description.
(struct ia64_frame_state): Location of all registers in a frame.
(struct object): Add pc_base and fde_end for IA64_UNWIND_INFO.
* libgcc2.c (__ia64_personality_v1): Personality routine.
(__calc_caller_bsp): Calculate the bsp register for the caller's
frame.
(ia64_throw_helper): Figure out who to return to and set up the
registers.
(__throw): Throw routine.
* output.h (assemble_eh_align, assemble_eh_label): New functions
to generate EH info where we want it.
(assemble_eh_integer): New function.
* toplev.c (compile_file): Output module level exception table for
non-ia64 targets.
(main): Set exceptions_via_longjump and flag_new_exceptions based
on IA64_UNWIND_INFO too.
* varasm.c (assemble_eh_label): Generate a label via
ASM_OUTPUT_EH_LABEL if it has been specified.
(assemble_eh_align): Generate an alignment directive via
ASM_OUTPUT_EH_ALIGN if it has been specified.
(assemble_eh_label): Generate an integer value via
ASM_OUTPUT_EH_type if they have been specified.
* config/ia64/ia64.c (rtx_needs_barrier): Add flushrs.
(ia64_init_builtins): Add __builtin_ia64_bsp
and __builtin_ia64_flushrs.
(ia64_expand_builtin): Add IA64_BUILTIN_BSP and
IA64_BUILTIN_FLUSHRS.
* config/ia64/ia64.h (ia64_builtins): Add IA64_BUILTIN_BSP and
IA64_BUILTIN_FLUSHRS.
* config/ia64/ia64.md (flushrs): New insn to flush the register
stack. Add to unspec list.
* config/ia64/crtbegin.asm (frame_object): Change size.
(__do_frame_setup_aux): New function.
* config/ia64/crtend.asm: call __do_frame_setup_aux.
* config/ia64/t-ia64 (LIB2ADDEH): Add.
* Makefile.in (LIB2ADDEH): Add.
(LIB2ADD): Use LIB2ADDEH.
Co-Authored-By: Andrew Haley <aph@cygnus.com>
From-SVN: r34169
* final.c (final_scan_insn, case NOTE_INSN_FUNCTION_BEG): Remove
dangling "else" that causes "break" to be conditional.
Also remove unneeded code at start.
From-SVN: r34082
* diagnostic.c: Eliminate implicit int.
* except.c, gcc.c: Add static prototypes.
* final.c (final_end_function): Mark file arg ATTRIBUTE_UNUSED.
* gensupport.c (process_rtx): Use XVEC to initialize vector
slot of 'split'.
* print-rtl.c: If DEBUG_REGISTER_NAMES, define static
debug_reg_names instead of static reg_names. If not, define
global reg_names.
* regclass.c: Don't define global reg_names unless
DEBUG_REGISTER_NAMES is defined.
* reload1.c (order_regs_for_reload): Remove unused variable.
* varasm.c: Include output.h after defaults.h. Define
eh_frame_section as function of no args, not of unspecified args.
* gcc.c: Constify argbuf; arguments to store_arg,
process_command, main; elements of struct command and struct
switchstr; local variables in execute, process_command, main.
cp:
* except.c: Add static prototypes.
From-SVN: r34054
* print-rtl.c (print_rtx): Only print note line number as string
if between NOTE_INSN_BIAS and NOTE_INSN_MAX.
* final.c (final_scan_insn): Do nothing for note line number 0.
From-SVN: r33997
* Makefile.in (final.o): Depend on BASIC_BLOCK_H.
* final.c (final_end_function): Use app_disable. Rearrange note
handling into a switch. Emit deleted labels.
(output_asm_label): Generate label strings for deleted labels.
* flow.c (tail_recursion_label_list): New.
(find_basic_blocks_1): Set label_value_list directly. Collect list
of tail recursion labels from call_placeholders. Don't add deleted
labels to the label value list.
(cleanup_cfg): Use free_EXPR_LIST_list.
(flow_delete_insn_chain): Turn non-removable labels into notes.
(flow_delete_block): Don't disable deleting the block because of
a non-removable label.
(tail_recursion_label_p): New.
(merge_blocks_move_predecessor_nojumps): Don't disable the merge
because of a label.
(merge_blocks_move_successor_nojumps): Likewise. Also move a
jump table.
(merge_blocks): Disable a merge because of tail recursion labels.
* ifcvt.c (merge_if_block): Don't disable a merge because of a label.
Use a more accurate measure of not merging the join block.
(find_if_block): Don't disable conversion because of a label.
(find_if_case_1, find_if_case_2): Likewise.
* jump.c (duplicate_loop_exit_test): Preserve the kind of list
element when copying.
(squeeze_notes): Also leave EH notes.
(mark_jump_label): Ignore deleted labels. Use an INSN_LIST for
REG_LABEL notes.
(delete_insn): Preserve LABEL_NAME in NOTE_SOURCE_FILE when
deleting a label.
* print-rtl.c (print_rtx): Print NOTE_SOURCE_FILE for
NOTE_INSN_DELETED_LABEL. Print `[# deleted]' for a label_ref
referring to a deleted label. Convert tail handling to a switch.
* rtl.def (CODE_LABEL): Rearrange elements to be compatible with NOTE
for NOTE_INSN_DELETED_LABEL.
(NOTE): Fix commentary.
* rtl.h (REG_LABEL): Update commentary wrt INSN_LIST.
(REG_CC_SETTER, REG_CC_USER, REG_LIBCALL): Likewise.
(CODE_LABEL_NUMBER, LABEL_NAME): Update index.
(LABEL_NUSES, LABEL_REFS): Likewise.
* unroll.c (copy_loop_body): Don't copy NOTE_INSN_DELETED_LABEL.
From-SVN: r33876