2019-07-21 Thomas König <tkoenig@gcc.gnu.org>
PR libfortran/91030
* gfortran.texi (GFORTRAN_FORMATTED_BUFFER_SIZE): Document
(GFORTRAN_UNFORMATTED_BUFFER_SIZE): Likewise.
2019-07-21 Thomas König <tkoenig@gcc.gnu.org>
PR libfortran/91030
* io/unix.c (BUFFER_SIZE): Delete.
(BUFFER_FORMATTED_SIZE_DEFAULT): New variable.
(BUFFER_UNFORMATTED_SIZE_DEFAULT): New variable.
(unix_stream): Add buffer_size.
(buf_read): Use s->buffer_size instead of BUFFER_SIZE.
(buf_write): Likewise.
(buf_init): Add argument unformatted. Handle block sizes
for unformatted vs. formatted, using defaults if provided.
(fd_to_stream): Add argument unformatted in call to buf_init.
* libgfortran.h (options_t): Add buffer_size_formatted and
buffer_size_unformatted.
* runtime/environ.c (variable_table): Add
GFORTRAN_UNFORMATTED_BUFFER_SIZE and
GFORTRAN_FORMATTED_BUFFER_SIZE.
From-SVN: r273643
This patch cleans up a few places where I noticed the code was still
using int instead gfc_charlen_type for string lengths. Regtested on
x86_64-pc-linux-gnu, committed as obvious.
libgfortran/ChangeLog:
2018-10-06 Janne Blomqvist <jb@gcc.gnu.org>
* io/unix.c (compare_file_filename): Use gfc_charlen_type instead
of int for string length.
(inquire_sequential): Likewise.
(inquire_direct): Likewise.
(inquire_formatted): Likewise.
(inquire_unformatted): Likewise.
(inquire_access): Likewise.
(inquire_read): Likewise.
(inquire_write): Likewise.
(inquire_readwrite): Likewise.
* io/unix.h (compare_file_filename): Likewise.
(inquire_sequential): Likewise.
(inquire_direct): Likewise.
(inquire_formatted): Likewise.
(inquire_unformatted): Likewise.
(inquire_read): Likewise.
(inquire_write): Likewise.
(inquire_readwrite): Likewise.
From-SVN: r264901
I've been tracking down a bug in a Fortran program on a newlib target and it boils down to fallback_access doing something bad.
The unconditional calls to close cause havoc when open doesn't get called due to the short-circuiting in the if-statement above
because the fd is uninitialised. In my environment GCC ends up calling close on file descriptor 0, thus trying to close stdin.
This patch tightens up the calling so that close is called only when the corresponding open call succeeded.
With this my runtime failure disappears.
Bootstrapped and tested on aarch64-none-linux-gnu.
Though that doesn't exercise this call I hope it's an obviously correct change.
* io/unix.c (fallback_access): Avoid calling close on
uninitialized file descriptor.
From-SVN: r264305
2018-08-21 Nicolas Koenig <koenigni@gcc.gnu.org>
Thomas Koenig <tkoenig@gcc.gnu.org>
PR fortran/25829
* gfortran.texi: Add description of asynchronous I/O.
* trans-decl.c (gfc_finish_var_decl): Treat asynchronous variables
as volatile.
* trans-io.c (gfc_build_io_library_fndecls): Rename st_wait to
st_wait_async and change argument spec from ".X" to ".w".
(gfc_trans_wait): Pass ID argument via reference.
2018-08-21 Nicolas Koenig <koenigni@gcc.gnu.org>
Thomas Koenig <tkoenig@gcc.gnu.org>
PR fortran/25829
* gfortran.dg/f2003_inquire_1.f03: Add write statement.
* gfortran.dg/f2003_io_1.f03: Add wait statement.
2018-08-21 Nicolas Koenig <koenigni@gcc.gnu.org>
Thomas Koenig <tkoenig@gcc.gnu.org>
PR fortran/25829
* Makefile.am: Add async.c to gfor_io_src.
Add async.h to gfor_io_headers.
* Makefile.in: Regenerated.
* gfortran.map: Add _gfortran_st_wait_async.
* io/async.c: New file.
* io/async.h: New file.
* io/close.c: Include async.h.
(st_close): Call async_wait for an asynchronous unit.
* io/file_pos.c (st_backspace): Likewise.
(st_endfile): Likewise.
(st_rewind): Likewise.
(st_flush): Likewise.
* io/inquire.c: Add handling for asynchronous PENDING
and ID arguments.
* io/io.h (st_parameter_dt): Add async bit.
(st_parameter_wait): Correct.
(gfc_unit): Add au pointer.
(st_wait_async): Add prototype.
(transfer_array_inner): Likewise.
(st_write_done_worker): Likewise.
* io/open.c: Include async.h.
(new_unit): Initialize asynchronous unit.
* io/transfer.c (async_opt): New struct.
(wrap_scalar_transfer): New function.
(transfer_integer): Call wrap_scalar_transfer to do the work.
(transfer_real): Likewise.
(transfer_real_write): Likewise.
(transfer_character): Likewise.
(transfer_character_wide): Likewise.
(transfer_complex): Likewise.
(transfer_array_inner): New function.
(transfer_array): Call transfer_array_inner.
(transfer_derived): Call wrap_scalar_transfer.
(data_transfer_init): Check for asynchronous I/O.
Perform a wait operation on any pending asynchronous I/O
if the data transfer is synchronous. Copy PDT and enqueue
thread for data transfer.
(st_read_done_worker): New function.
(st_read_done): Enqueue transfer or call st_read_done_worker.
(st_write_done_worker): New function.
(st_write_done): Enqueue transfer or call st_read_done_worker.
(st_wait): Document as no-op for compatibility reasons.
(st_wait_async): New function.
* io/unit.c (insert_unit): Use macros LOCK, UNLOCK and TRYLOCK;
add NOTE where necessary.
(get_gfc_unit): Likewise.
(init_units): Likewise.
(close_unit_1): Likewise. Call async_close if asynchronous.
(close_unit): Use macros LOCK and UNLOCK.
(finish_last_advance_record): Likewise.
(newunit_alloc): Likewise.
* io/unix.c (find_file): Likewise.
(flush_all_units_1): Likewise.
(flush_all_units): Likewise.
* libgfortran.h (generate_error_common): Add prototype.
* runtime/error.c: Include io.h and async.h.
(generate_error_common): New function.
2018-08-21 Nicolas Koenig <koenigni@gcc.gnu.org>
Thomas Koenig <tkoenig@gcc.gnu.org>
PR fortran/25829
* testsuite/libgomp.fortran/async_io_1.f90: New test.
* testsuite/libgomp.fortran/async_io_2.f90: New test.
* testsuite/libgomp.fortran/async_io_3.f90: New test.
* testsuite/libgomp.fortran/async_io_4.f90: New test.
* testsuite/libgomp.fortran/async_io_5.f90: New test.
* testsuite/libgomp.fortran/async_io_6.f90: New test.
* testsuite/libgomp.fortran/async_io_7.f90: New test.
Co-Authored-By: Thomas Koenig <tkoenig@gcc.gnu.org>
From-SVN: r263750
2018-07-31 Andre Vieira <andre.simoesdiasvieira@arm.com>
Revert 'AsyncI/O patch committed'
2018-07-25 Nicolas Koenig <koenigni@gcc.gnu.org>
Thomas Koenig <tkoenig@gcc.gnu.org>
PR fortran/25829
* gfortran.texi: Add description of asynchronous I/O.
* trans-decl.c (gfc_finish_var_decl): Treat asynchronous variables
as volatile.
* trans-io.c (gfc_build_io_library_fndecls): Rename st_wait to
st_wait_async and change argument spec from ".X" to ".w".
(gfc_trans_wait): Pass ID argument via reference.
2018-07-31 Andre Vieira <andre.simoesdiasvieira@arm.com>
Revert 'AsyncI/O patch committed'
2018-07-25 Nicolas Koenig <koenigni@gcc.gnu.org>
Thomas Koenig <tkoenig@gcc.gnu.org>
PR fortran/25829
* gfortran.dg/f2003_inquire_1.f03: Add write statement.
* gfortran.dg/f2003_io_1.f03: Add wait statement.
2018-07-31 Andre Vieira <andre.simoesdiasvieira@arm.com>
Revert 'AsyncI/O patch committed'
2018-07-25 Nicolas Koenig <koenigni@gcc.gnu.org>
Thomas Koenig <tkoenig@gcc.gnu.org>
PR fortran/25829
* Makefile.am: Add async.c to gfor_io_src.
Add async.h to gfor_io_headers.
* Makefile.in: Regenerated.
* gfortran.map: Add _gfortran_st_wait_async.
* io/async.c: New file.
* io/async.h: New file.
* io/close.c: Include async.h.
(st_close): Call async_wait for an asynchronous unit.
* io/file_pos.c (st_backspace): Likewise.
(st_endfile): Likewise.
(st_rewind): Likewise.
(st_flush): Likewise.
* io/inquire.c: Add handling for asynchronous PENDING
and ID arguments.
* io/io.h (st_parameter_dt): Add async bit.
(st_parameter_wait): Correct.
(gfc_unit): Add au pointer.
(st_wait_async): Add prototype.
(transfer_array_inner): Likewise.
(st_write_done_worker): Likewise.
* io/open.c: Include async.h.
(new_unit): Initialize asynchronous unit.
* io/transfer.c (async_opt): New struct.
(wrap_scalar_transfer): New function.
(transfer_integer): Call wrap_scalar_transfer to do the work.
(transfer_real): Likewise.
(transfer_real_write): Likewise.
(transfer_character): Likewise.
(transfer_character_wide): Likewise.
(transfer_complex): Likewise.
(transfer_array_inner): New function.
(transfer_array): Call transfer_array_inner.
(transfer_derived): Call wrap_scalar_transfer.
(data_transfer_init): Check for asynchronous I/O.
Perform a wait operation on any pending asynchronous I/O
if the data transfer is synchronous. Copy PDT and enqueue
thread for data transfer.
(st_read_done_worker): New function.
(st_read_done): Enqueue transfer or call st_read_done_worker.
(st_write_done_worker): New function.
(st_write_done): Enqueue transfer or call st_read_done_worker.
(st_wait): Document as no-op for compatibility reasons.
(st_wait_async): New function.
* io/unit.c (insert_unit): Use macros LOCK, UNLOCK and TRYLOCK;
add NOTE where necessary.
(get_gfc_unit): Likewise.
(init_units): Likewise.
(close_unit_1): Likewise. Call async_close if asynchronous.
(close_unit): Use macros LOCK and UNLOCK.
(finish_last_advance_record): Likewise.
(newunit_alloc): Likewise.
* io/unix.c (find_file): Likewise.
(flush_all_units_1): Likewise.
(flush_all_units): Likewise.
* libgfortran.h (generate_error_common): Add prototype.
* runtime/error.c: Include io.h and async.h.
(generate_error_common): New function.
2018-07-31 Andre Vieira <andre.simoesdiasvieira@arm.com>
Revert 'AsyncI/O patch committed'.
2018-07-25 Nicolas Koenig <koenigni@gcc.gnu.org>
Thomas Koenig <tkoenig@gcc.gnu.org>
PR fortran/25829
* testsuite/libgomp.fortran/async_io_1.f90: New test.
* testsuite/libgomp.fortran/async_io_2.f90: New test.
* testsuite/libgomp.fortran/async_io_3.f90: New test.
* testsuite/libgomp.fortran/async_io_4.f90: New test.
* testsuite/libgomp.fortran/async_io_5.f90: New test.
* testsuite/libgomp.fortran/async_io_6.f90: New test.
* testsuite/libgomp.fortran/async_io_7.f90: New test.
From-SVN: r263082
2018-07-25 Nicolas Koenig <koenigni@gcc.gnu.org>
Thomas Koenig <tkoenig@gcc.gnu.org>
PR fortran/25829
* gfortran.texi: Add description of asynchronous I/O.
* trans-decl.c (gfc_finish_var_decl): Treat asynchronous variables
as volatile.
* trans-io.c (gfc_build_io_library_fndecls): Rename st_wait to
st_wait_async and change argument spec from ".X" to ".w".
(gfc_trans_wait): Pass ID argument via reference.
2018-07-25 Nicolas Koenig <koenigni@gcc.gnu.org>
Thomas Koenig <tkoenig@gcc.gnu.org>
PR fortran/25829
* gfortran.dg/f2003_inquire_1.f03: Add write statement.
* gfortran.dg/f2003_io_1.f03: Add wait statement.
2018-07-25 Nicolas Koenig <koenigni@gcc.gnu.org>
Thomas Koenig <tkoenig@gcc.gnu.org>
PR fortran/25829
* Makefile.am: Add async.c to gfor_io_src.
Add async.h to gfor_io_headers.
* Makefile.in: Regenerated.
* gfortran.map: Add _gfortran_st_wait_async.
* io/async.c: New file.
* io/async.h: New file.
* io/close.c: Include async.h.
(st_close): Call async_wait for an asynchronous unit.
* io/file_pos.c (st_backspace): Likewise.
(st_endfile): Likewise.
(st_rewind): Likewise.
(st_flush): Likewise.
* io/inquire.c: Add handling for asynchronous PENDING
and ID arguments.
* io/io.h (st_parameter_dt): Add async bit.
(st_parameter_wait): Correct.
(gfc_unit): Add au pointer.
(st_wait_async): Add prototype.
(transfer_array_inner): Likewise.
(st_write_done_worker): Likewise.
* io/open.c: Include async.h.
(new_unit): Initialize asynchronous unit.
* io/transfer.c (async_opt): New struct.
(wrap_scalar_transfer): New function.
(transfer_integer): Call wrap_scalar_transfer to do the work.
(transfer_real): Likewise.
(transfer_real_write): Likewise.
(transfer_character): Likewise.
(transfer_character_wide): Likewise.
(transfer_complex): Likewise.
(transfer_array_inner): New function.
(transfer_array): Call transfer_array_inner.
(transfer_derived): Call wrap_scalar_transfer.
(data_transfer_init): Check for asynchronous I/O.
Perform a wait operation on any pending asynchronous I/O
if the data transfer is synchronous. Copy PDT and enqueue
thread for data transfer.
(st_read_done_worker): New function.
(st_read_done): Enqueue transfer or call st_read_done_worker.
(st_write_done_worker): New function.
(st_write_done): Enqueue transfer or call st_read_done_worker.
(st_wait): Document as no-op for compatibility reasons.
(st_wait_async): New function.
* io/unit.c (insert_unit): Use macros LOCK, UNLOCK and TRYLOCK;
add NOTE where necessary.
(get_gfc_unit): Likewise.
(init_units): Likewise.
(close_unit_1): Likewise. Call async_close if asynchronous.
(close_unit): Use macros LOCK and UNLOCK.
(finish_last_advance_record): Likewise.
(newunit_alloc): Likewise.
* io/unix.c (find_file): Likewise.
(flush_all_units_1): Likewise.
(flush_all_units): Likewise.
* libgfortran.h (generate_error_common): Add prototype.
* runtime/error.c: Include io.h and async.h.
(generate_error_common): New function.
2018-07-25 Nicolas Koenig <koenigni@gcc.gnu.org>
Thomas Koenig <tkoenig@gcc.gnu.org>
PR fortran/25829
* testsuite/libgomp.fortran/async_io_1.f90: New test.
* testsuite/libgomp.fortran/async_io_2.f90: New test.
* testsuite/libgomp.fortran/async_io_3.f90: New test.
* testsuite/libgomp.fortran/async_io_4.f90: New test.
* testsuite/libgomp.fortran/async_io_5.f90: New test.
* testsuite/libgomp.fortran/async_io_6.f90: New test.
* testsuite/libgomp.fortran/async_io_7.f90: New test.
Co-Authored-By: Thomas Koenig <tkoenig@gcc.gnu.org>
From-SVN: r262978
In order to handle large characters when doing formatted I/O, use
size_t and ptrdiff_t for lengths. Compared to the previous patch,
based on discussions on IRC use size_t for sizes that don't need to be
negative rather than ptrdiff_t everywhere.
Regtested on x86_64-pc-linux-gnu, approved as part of the PR 78534
approval, committed to trunk.
libgfortran/ChangeLog:
2018-01-07 Janne Blomqvist <jb@gcc.gnu.org>
PR fortran/78534
PR fortran/83704
* io/fbuf.c (fbuf_init): Use size_t instead of int for length.
(fbuf_debug): Convert debug output to unsigned long.
(fbuf_reset): Use ptrdiff_t for return value.
(fbuf_alloc): Use size_t for length argument.
(fbuf_flush): Handle large buffers.
(fbuf_flush_list): Likewise.
(fbuf_seek): Use ptrdiff_t for offset and return value.
(fbuf_read): Use size_t for length argument.
(fbuf_getc_refill): Use size_t to match fbuf_read.
* io/fbuf.h (struct fbuf): Use size_t for lengths.
(fbuf_init): Use size_t instead of int for length.
(fbuf_reset): Use ptrdiff_t for return value.
(fbuf_alloc): Use size_t for length argument.
(fbuf_seek): Use ptrdiff_t for offset and return value.
(fbuf_read): Use size_t for length argument.
* io/io.h (read_block_form): Likewise.
(read_block_form4): Likewise.
(write_block): Likewise.
(read_a): Likewise.
(read_a_char4): Likewise.
(read_x): Likewise.
(write_a): Likewise.
(write_a_char4): Likewise.
* io/list_read.c (list_formatted_read_scalar): Use size_t to
handle large buffers.
* io/read.c (read_l): Likewise.
(read_utf8): Likewise.
(read_utf8_char1): Likewise.
(read_default_char1): Likewise.
(read_utf8_char4): Likewise.
(read_default_char4): Likewise.
(read_a): Likewise.
(read_a_char4): Likewise.
(eat_leading_spaces): Likewise.
(next_char): Likewise.
(read_decimal): Likewise.
(read_radix): Likewise.
(read_f): Likewise.
(read_x): Likewise.
* io/transfer.c (read_sf_internal): Likewise.
(read_sf): Likewise.
(read_block_form): Likewise.
(read_block_form4): Likewise.
(write_block): Likewise.
(formatted_transfer_scalar_write): Likewise.
(next_record_w): Likewise.
* io/unix.c (mem_alloc_r): Likewise.
(mem_alloc_r4): Likewise.
(mem_alloc_w): Likewise.
(mem_alloc_w4): Likewise.
(mem_read): Likewise.
(mem_read4): Likewise.
(mem_write): Likewise.
(mem_write4): Likewise.
(open_internal): Likewise.
(open_internal4): Likewise.
* io/unix.h (open_internal): Likewise.
(open_internal4): Likewise.
(mem_alloc_w): Likewise.
(mem_alloc_r): Likewise.
(mem_alloc_w4): Likewise.
(mem_alloc_r4): Likewise.
* io/write.c (write_check_cc): Likewise.
(write_cc): Likewise.
(write_a): Likewise.
(write_a_char4): Likewise.
From-SVN: r256322
It turns out that Linux never reads or writes more than 2147479552
bytes in a single syscall. For writes this is not a problem as
libgfortran already contains a loop around write() to handle short
writes. But for reads we cannot do this, since then read will hang if
we have a short read when reading from the terminal. Also, there are
reports that macOS fails I/O's larger than 2 GB. Thus, to work around
these issues do large reads/writes in chunks.
The testcase from the PR
program largewr
integer(kind=1) :: a(2_8**31+1)
a = 0
a(size(a, kind=8)) = 1
open(10, file="largewr.dat", access="stream", form="unformatted")
write (10) a
close(10)
a(size(a, kind=8)) = 2
open(10, file="largewr.dat", access="stream", form="unformatted")
read (10) a
if (a(size(a, kind=8)) == 1) then
print *, "All is well"
else
print *, "Oh no"
end if
end program largewr
fails on trunk but works with the patch.
Regtested on x86_64-pc-linux-gnu, committed to trunk.
libgfortran/ChangeLog:
2018-01-02 Janne Blomqvist <jb@gcc.gnu.org>
PR libgfortran/83649
* io/unix.c (MAX_CHUNK): New define.
(raw_read): For reads larger than MAX_CHUNK, loop.
(raw_write): Write no more than MAX_CHUNK bytes per iteration.
From-SVN: r256074
2017-12-12 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/78549
* io/inquire.c (inquire_via_unit): Adjust test for existence for
pre-connected internal units.
* io/transfer.c (finalize_transfer): When done with a transfer
to internal units, free the format buffer and close the stream.
(st_read_done): Delete freeing the stream, now handled using
sclose in finalize_transfer. (st_write_done): Likewise.
* io/unit.c (get_unit): Return NULL for special reserved unit
numbers, signifying not accessible to the user.
(init_units): Insert the two special internal units into the
unit treap. This makes these unit structures available without
further allocations for later use by internal unit I/O. These
units are automatically deleted by normal program termination.
* io/unix.c (mem_close): Add a guard check to protect from double free.
From-SVN: r255621
Many POSIX systems have the bad habit of not restarting interrupted
syscalls. On these systems it's up to the user to check for an error
with errno == EINTR and restart manually. This patch does this for
libgfortran, so that GFortran users don't have to do it.
2016-10-09 Janne Blomqvist <jb@gcc.gnu.org>
PR libfortran/67585
* io/io.h: TEMP_FAILURE_RETRY: Define macro if not found.
* io/unix.c (raw_read): Handle EINTR.
(raw_write): Check for return value -1.
(raw_seek): Handle EINTR.
(raw_tell): Likewise.
(raw_size): Likewise.
(raw_truncate): Likewise.
(raw_close): Likewise.
(buf_flush): Call raw_seek instead of lseek.
(buf_read): Likewise.
(buf_write): Likewise.
(fd_to_stream): Handle EINTR.
(tempfile_open): Likewise.
(regular_file2): Likewise.
(compare_file_filename): Likewise.
(find_file): Likewise.
(inquire_sequential): Likewise.
(inquire_direct): Likewise.
(inquire_formatted): Likewise.
From-SVN: r240902
2016-08-31 Paul Thomas <pault@gcc.gnu.org>
Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR fortran/48298
* decl.c (access_attr_decl): Include case INTERFACE_DTIO as
appropriate.
* gfortran.h : Add INTRINSIC_FORMATTED and
INTRINSIC_UNFORMATTED to gfc_intrinsic_op. Add INTERFACE_DTIO
to interface type. Add new enum 'dtio_codes'. Add bitfield
'has_dtio_procs' to symbol_attr. Add prototypes
'gfc_check_dtio_interfaces' and 'gfc_find_specific_dtio_proc'.
* interface.c (dtio_op): New function.
(gfc_match_generic_spec): Match generic DTIO interfaces.
(gfc_match_interface): Treat DTIO interfaces in the same way as
(gfc_current_interface_head): Add INTERFACE_DTIO appropriately.
(check_dtio_arg_TKR_intent): New function.
(check_dtio_interface1): New function.
(gfc_check_dtio_interfaces): New function.
(gfc_find_specific_dtio_proc): New function.
* io.c : Add FMT_DT to format_token.
(format_lex): Handle DTIO formatting.
* match.c (gfc_op2string): Add DTIO operators.
* resolve.c (derived_inaccessible): Ignore pointer components
to enclosing derived type.
(resolve_transfer): Resolve transfers that involve DTIO.
procedures. Find the specific subroutine for the transfer and
use its existence to over-ride some of the constraints on
derived types. If the transfer is recursive, require that the
subroutine be so qualified.
(dtio_procs_present): New function.
(resolve_fl_namelist): Remove inhibition of polymorphic objects
in namelists if DTIO read and write subroutines exist. Likewise
for derived types.
(resolve_types): Invoke 'gfc_verify_dtio_procedures'.
* symbol.c : Set 'dtio_procs' using 'minit'.
* trans-decl.c (gfc_finish_var_decl): If a derived-type/class
object is associated with DTIO procedures, make it TREE_STATIC.
* trans-expr.c (gfc_get_vptr_from_expr): If the expression
drills down to a PARM_DECL, extract the vptr correctly.
(gfc_conv_derived_to_class): Check 'info' in the test for
'useflags'. If the se expression exists and is a pointer, use
it as the class _data.
* trans-io.c : Add IOCALL_X_DERIVED to iocall and the function
prototype. Likewise for IOCALL_SET_NML_DTIO_VAL.
(set_parameter_tree): Renamed from 'set_parameter_const', now
returns void and has new tree argument. Calls modified to match
new interface.
(transfer_namelist_element): Transfer DTIO procedure pointer
and vpointer using the new function IOCALL_SET_NML_DTIO_VAL.
(get_dtio_proc): New function.
(transfer_expr): Add new argument for the vptr field of class
objects. Add the code to call the specific DTIO proc, convert
derived types to class and call IOCALL_X_DERIVED.
(trans_transfer): Add BT_CLASS to structures for treatment by
the scalarizer. Obtain the vptr for the dynamic type, both for
scalar and array transfer.
2016-08-31 Jerry DeLisle <jvdelisle@gcc.gnu.org>
Paul Thomas <pault@gcc.gnu.org>
PR libgfortran/48298
* gfortran.map : Flag _st_set_nml_dtio_var and
_gfortran_transfer_derived.
* io/format.c (format_lex): Detect DTIO formatting.
(parse_format_list): Parse the DTIO format.
(next_format): Include FMT_DT.
* io/format.h : Likewise. Add structure 'udf' to structure
'fnode' to carry the IOTYPE string and the 'vlist'.
* io/io.h : Add prototypes for the two types of DTIO subroutine
and a typedef for gfc_class. Also, add to 'namelist_type'
fields for the pointer to the DTIO procedure and the vtable.
Add fields to struct st_parameter_dt for pointers to the two
types of DTIO subroutine. Add to gfc_unit DTIO specific fields.
(internal_proto): Add prototype for 'read_user_defined' and
'write_user_defined'.
* io/list_read.c (check_buffers): Use the 'current_unit' field.
(unget_char): Likewise.
(eat_spaces): Likewise.
(list_formatted_read_scalar): For case BT_CLASS, call the DTIO
procedure.
(nml_get_obj_data): Likewise when DTIO procedure is present,.
* io/transfer.c : Export prototypes for 'transfer_derived' and
'transfer_derived_write'.
(unformatted_read): For case BT_CLASS, call the DTIO procedure.
(unformatted_write): Likewise.
(formatted_transfer_scalar_read): Likewise.
(formatted_transfer_scalar_write: Likewise.
(transfer_derived): New function.
(data_transfer_init): Set last_char if no child_dtio.
(finalize_transfer): Return if child_dtio set.
(st_write_done): Add condition for child_dtio not set.
Add extra arguments for st_set_nml_var prototype.
(set_nml_var): New function that contains the contents of the
old version of st_set_nml_var. Also sets the 'dtio_sub' and
'vtable' fields of the 'nml' structure.
(st_set_nml_var): Now just calls set_nml_var with 'dtio_sub'
and 'vtable' NULL.
(st_set_nml_dtio_var): New function that calls set_nml_var.
* io/unit.c (get_external_unit): If the found unit child_dtio
is non zero, don't do any mutex locking/unlocking. Just
return the unit.
* io/unix.c (tempfile_open): Revert to C style comment.
* io/write.c (list_formatted_write_scalar): Do the DTIO call.
(nml_write_obj): Add BT_CLASS and do the DTIO call.
2016-08-31 Jerry DeLisle <jvdelisle@gcc.gnu.org>
Paul Thomas <pault@gcc.gnu.org>
PR fortran/48298
* gfortran.dg/dtio_1.f90: New test.
* gfortran.dg/dtio_2.f90: New test.
* gfortran.dg/dtio_3.f90: New test.
* gfortran.dg/dtio_4.f90: New test.
* gfortran.dg/dtio_5.f90: New test.
* gfortran.dg/dtio_6.f90: New test.
* gfortran.dg/dtio_7.f90: New test.
* gfortran.dg/dtio_8.f90: New test.
* gfortran.dg/dtio_9.f90: New test.
* gfortran.dg/dtio_10.f90: New test.
From-SVN: r239880
2015-08-29 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/67367
* io/unix.c (buf_read): Check for error condition and if found
return the error code.
From-SVN: r227320
2015-07-14 Janne Blomqvist <jb@gcc.gnu.org>
PR libfortran/66861
* io/unix.c (compare_file_filename): Verify that u->filename is
non-NULL before strcmp.
(find_file0): Likewise.
From-SVN: r225788
2014-06-28 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/61640
* io/list_read.c (next_char_internal): Adjust the read length to
a single wide character. (eat_spaces): Add missing paren.
* io/unix.c (mem_read4): Use the correct mem_alloc function for
wide character internal reads.
From-SVN: r212118
2014-05-16 Janne Blomqvist <jb@gcc.gnu.org>
PR libfortran/61187
* io/unix.c (raw_close): Check if s->fd is -1.
(fd_to_stream): Check return value of fstat(), handle error.
From-SVN: r210527
2013-11-15 Janne Blomqvist <jb@gcc.gnu.org>
Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR fortran/59108
* io/unix.c (regular_file): Don't set O_CREAT when opening a file
read-only with unknown status. Mask out O_CREAT when falling back
to opening read-only if ACTION= is not set and read-write fails.
Co-Authored-By: Jerry DeLisle <jvdelisle@gcc.gnu.org>
From-SVN: r204864
2013-11-10 Janne Blomqvist <jb@gcc.gnu.org>
* configure.ac: Check presence of mkostemp.
* io/unix.c (set_close_on_exec): New function.
(tempfile_open): Use mkostemp and O_CLOEXEC if available, fallback
to calling set_close_on_exec.
(regular_file): Add O_CLOEXEC to flags if defined.
(open_external): Call set_close_on_exec if O_CLOEXEC is not
defined.
* config.h.in: Regenerated.
* configure: Regenerated.
* Makefile.in: Regenerated.
* aclocal.m4: Regenerated.
From-SVN: r204654
2012-12-21 Thomas Koenig <tkoenig@gcc.gnu.org>
PR libfortran/30162
* io/unix.c (raw_tell): If the lseek is done on a
non-seekable file, return 0.
From-SVN: r194679
Jakub Jelinek
Jakub Jelinek
Thomas Koenig
Janne Blomqvist
Kyrylo Tkachov
Nicolas Koenig
Andre Vieira
Jerry DeLisle
Francois-Xavier Coudert
Fritz Reese
Paul Thomas
Ulrich Weigand
Richard Sandiford
Andreas Tobler
David Edelsohn
Richard Sandiford
Tobias Burnus
Tobias Burnus