* pa-osf.h (SIZE_TYPE): Define as "long unsigned int" to be
compatable with system include files.
* pa1-osf.h (SIZE_TYPE): Likewise.
* pa1-osf.h (WCHAR_TYPE): Define as "short unsigned int".
(WCHAR_TYPE_SIZE): Define as 16 bits.
From-SVN: r7451
(arm_reload_out_hi): Rewrite. Add support for processors running in
big-endian mode.
(fp_immediate_constant): Fix typo in argument declaration.
From-SVN: r7449
(storeinthi): Rework to generate better code, add big-endian support.
(movhi): Add support for processors running in big-endian mode.
(movhi_bigend): New expansion pattern.
(matcher for movhi): Remove incorrect alternative for storing HImode to
memory. Only match when little endian.
(matcher for big-endian movhi): New pattern.
(matchers/peepholes for extended pre/post increment HImode loads): Only
match when little-endian.
(matcher for operating on adjacent memory locations): Load operation into
arith operands.
(peepholes for extended pre-increment byte loads): New patterns.
From-SVN: r7448
(FUNCTION_PROFILER, TRAMPOLINE_TEMPLATE, ASM_FILE_START,
ASM_OUTPUT_REG_{PUSH,POP}, PRINT_OPERAND_ADDRESS): Output register
prefix before any explicit register name.
(ASM_OUTPUT_LONG_DOUBLE, ASM_OUTPUT_DOUBLE, ASM_OUTPUT_FLOAT,
ASM_OUTPUT_COMMON): Output the target dependent comment char.
(ASM_FILE_START): Output register alias for r10.
(REGISTER_NAMES): Output "r9" now for r9, not "rfp".
(ADDITIONAL_REGISTER_NAMES): New macro.
From-SVN: r7444
(REGNO_OK_FOR_FP_P): Use FP_REGNO_P.
(FUNCTION_VALUE_REGNO_P): Revert last change.
(CONDITIONAL_REGISTER_USAGE): Partially revert last changes;
Make non-existing 1.0 fp regs fixed, including odd-numbered regs.
(enum reg_class): Get rid of SNAKE_FP_REGS, GENERAL_OR_SNAKE_FP_REGS,
and NON_SHIFT_REGS.
(REG_CLASS_NAMES): Likewise.
(REG_CLASS_CONTENTS): Likewise.
(REGNO_REG_CLASS): Likewise.
(HARD_REGNO_MODE_OK): Corresponding changes. Don't force 1.0 fpregs
to even regno here; fixed_regs does the job better.
(FP_REG_CLASS_P): Get rid of SNAKE_FP_REGS.
(REG_CLASS_FROM_LETTER, case 'z'): Deleted.
(HARD_REGNO_NREGS): Partially revert last change.
(CLASS_MAX_NREGS): Partially revert last change.
From-SVN: r7438
(all patterns): Update instruction generation to reflect new meanings of
constraints 'K' and 'L'. Use output type 'B' to generate an inverted
constant. Use output type 'N' to generate a negated floating point
constant.
From-SVN: r7436
* pa.h (TARGET_SWITCHES): Enable TARGET_LONG_CALLS when
TARGET_PORTABLE_RUNTIME is enabled.
* pa.c (output_call): If TARGET_LONG_CALLS is enabled, then emit
an inline long-call sequence.
* pa.md (millicode define_delay): Disable delay slots if
TARGET_LONG_CALLS.
(call_internal_reg, call_value_internal_reg): If TARGET_LONG_CALLS
is enabled, then emit an inline long-call sequence. Fix length
computation for TARGET_LONG_CALLS.
(millicode calls): Fix length computation for TARGET_LONG_CALLS.
From-SVN: r7434
output_func_{prologue,epilogue}): Change declarations from
output_{prologue,epilogue}.
(arm_output_llc, arithmetic_instr, output_arithmetic_with_immediate_mulitply,
output_arithmetic_with_shift, shift_instr): Delete function definition.
(ASM_OUTPUT_OPCODE): Delete.
(PRINT_OPERAND): Call arm_print_operand, instead of doing it directly.
(ARM_COMMENT_CHAR): New macro.
(ARM_REG_PREFIX): New macro.
(ARM_SIGN_EXTEND): New macro.
(PRINT_OPERAND_ADDRESS): Delete variable 'shift'. Change type of
variable 'offset' to HOST_WIDE_INT. Use arm_print_operand to handle
shifts in addresses.
From-SVN: r7426
(all output patterns): Use new capabilities of arm_print_operand to
simplify output sequences. Mark position of condition code with '%?'.
From-SVN: r7425
(const_pool_offset): Correct typo.
(fp_const_from_val): New function.
(all instruction generators): mark position where conditionalization
should be with '%?'.
(output_move_double): Use new '%m' output type to simplify load/store
multiple generation.
(shift_instr): Delete.
(shift_op): New function.
(output_arithmetic): Delete.
(output_arithmetic_with_shift): Delete.
(output_arithmetic_with_immediate_multiply): Delete.
(output_shifted_move): Delete.
(output_shift_compare): Delete.
(arm_print_operand): New function.
From-SVN: r7423
(FUNCTION_{PROLOGUE,EPILOGUE}): Call output_func_{prologue,epilogue}.
(INITIAL_ELIMINATION_OFFSET): Inspect all registers, but only add those that
are not in call_used_regs.
(GO_IF_LEGITIMATE_INDEX): Change type of variable 'range' to HOST_WIDE_INT;
change type of variable 'code' to enum rtx_code.
(arm_output_asm_insn): Delete declaration.
(EXTRA_CONSTAINT): New constraint 'R' to match a constant pool label.
Make constraint 'S' never match when not optimizing.
(CONSTANT_ADDRESS_P): Only accept symbols marked with SYMBOL_REF_FLAG when
optimizing.
(ENCODE_SECTION_INFO): Don't mark any symbols when not optimizing.
(ASM_OUTPUT_REG_{PUSH,POP}: Don't call arm_increase_location.
(ASM_OUTPUT_ADDR_VEC_ELT): Likewise.
From-SVN: r7417
#include <string.h>.
Declare some prototypes.
(output_memory_reference_mode): Change type to enum machine_mode.
(arm_const_nmoves): Delete.
(adjacent_mem_locations, {load,store}_multiple_operation): Explicitly
declare to return int.
({load,store}_multiple_operation): Change type of 'count', 'base' and 'i' to
HOST_WIDE_INT.
(output_add_immediate): Change type of 'n' to HOST_WIDE_INT.
(output_multi_immediate): Change type of Argument 'n' to HOST_WIDE_INT, if
wider than 32 bits, mask out the high bits.
(output_arithmetic_with_immediate_multiply): Change type of 'shift'
to HOST_WIDE_INT.
(output_func_{prologue,epilogue}): Renamed from output_{prologue,epilogue}.
Check all registers to see if they are live, but only push/pop them if they
are not in call_used_regs.
(const_pool_offset): New function.
(get_prologue_size): New function.
(output_func_prologue): Eliminate variable code_size.
(output_func_epilogue): Only call arm_increase_location when optimizing; also
add the size of the function just compiled, and the size of the prologue.
(arm_output_asm_insn): Delete. All callers changed to use output_asm_insn.
(arm_output_llc): Delete.
(output_load_symbol): New first parameter 'insn'. Rewrite so that assembler
can detect whether we made a mistake.
From-SVN: r7416
(output_block_move): Prefer addl to add.
(print_operand): Print fp regs with L suffix when appropriate.
(output_arg_descriptor): Rewrite to accomodate new convention for
USE information.
(compute_frame_size): Update for changed register numbers.
Simplify loops over general registers to stop at register 4.
(hppa_expand_prologue): Likewise.
(hppa_expand_epilogue): Likewise.
From-SVN: r7411
(print_global_hdr): Remove "l" from printf format
for flags.
(print_sym_hdr): Add missing "l" to printf formats.
(print_symbol, print_file_desc): Likewise.
From-SVN: r7404
