When producing error and warning messages, libgfortran writes a
message by using many system calls. By using vectored writes (the
POSIX writev function) when available and feasible to use without
major surgery, we reduce the chance that output gets intermingled with
other output to stderr.
In practice, this is done by introducing a new function estr_writev in
addition to the existing estr_write. In order to use this, the old
st_vprintf is removed, replaced by direct calls of vsnprintf, allowing
more message batching.
Regtested on x86_64-pc-linux-gnu.
libgfortran/ChangeLog:
2018-09-21 Janne Blomqvist <jb@gcc.gnu.org>
* config.h.in: Regenerated.
* configure: Regenerated.
* configure.ac: Check for writev and sys/uio.h.
* libgfortran.h: Include sys/uio.h.
(st_vprintf): Remove prototype.
(struct iovec): Define if not available.
(estr_writev): New prototype.
* runtime/backtrace.c (error_callback): Use estr_writev.
* runtime/error.c (ST_VPRINTF_SIZE): Remove.
(estr_writev): New function.
(st_vprintf): Remove.
(gf_vsnprintf): New function.
(ST_ERRBUF_SIZE): New macro.
(st_printf): Use vsnprintf.
(os_error): Use estr_writev.
(runtime_error): Use vsnprintf and estr_writev.
(runtime_error_at): Likewise.
(runtime_warning_at): Likewise.
(internal_error): Use estr_writev.
(generate_error_common): Likewise.
(generate_warning): Likewise.
(notify_std): Likewise.
* runtime/pause.c (pause_string): Likewise.
* runtime/stop.c (report_exception): Likewise.
(stop_string): Likewise.
(error_stop_string): Likewise.
From-SVN: r264487
The getentropy function, found on Linux, OpenBSD, and recently also
FreeBSD, can be used to get random bytes to initialize the PRNG. It
is similar to the traditional way of reading from /dev/urandom, but
being a system call rather than a special file, it doesn't suffer from
problems like running out of file descriptors, or failure when running
in a container where /dev/urandom may not be available.
Regtested on x86_64-pc-linux-gnu, Ok for trunk?
2018-08-13 Janne Blomqvist <jb@gcc.gnu.org>
* configure.ac: Check for getentropy.
* intrinsics/random.c (getosrandom): Use getentropy if available.
* config.h.in: Regenerated.
* configure: Regenerated.
From-SVN: r263522
* config/cet.m4 (GCC_CET_FLAGS): Default to --disable-cet, replace
--enable-cet=default with --enable-cet=auto.
* doc/install.texi: Document --disable-cet being the default and
--enable-cet=auto.
* configure: Regenerated.
From-SVN: r259487
PR jit/85384
* acx.m4 (GCC_BASE_VER): Remove \$\$ from sed expression.
* configure.ac (gcc-driver-name.h): Honor --with-gcc-major-version
by using gcc_base_ver to generate a gcc_driver_version, and use
it when generating GCC_DRIVER_NAME.
* configure: Regenerate.
* configure: Regenerate.
From-SVN: r259462
ENDBR32 and RDSSPD are multi-byte NOPs on x86-64 processors and
newer x86 processors, starting Pentium Pro. They are UD on older
32-bit processors. Detect this at configure time and adjust the
default value for enable_cet. GCC will enable CET in 32-bit run-time
libraries in any case if --enable-cet is used to configure GCC.
PR target/84148
* config/cet.m4: Check if target support multi-byte NOPS (SSE).
* libatomic/configure: Regenerate.
* libbacktrace/configure: Likewise.
* libgcc/configure: Likewise.
* libgfortran/configure: Likewise.
* libgomp/configure: Likewise.
* libitm/configure: Likewise.
* libmpx/configure: Likewise.
* libobjc/configure: Likewise.
* libquadmath/configure: Likewise.
* libsanitizer/configure: Likewise.
* libssp/configure: Likewise.
* libstdc++-v3/configure: Likewise.
* libvtv/configure: Likewise.
From-SVN: r257809
* acinclude.m4 (LIBGFOR_CHECK_FMA3): Use test from
check_effective_target_fma in gcc.target/i386/i386.exp.
(LIBGFOR_CHECK_FMA4): Use test from check_effective_target_fma4.
* configure: Regenerate.
From-SVN: r248547
2017-05-26 Thomas Koenig <tkoenig@gcc.gnu.org>
PR boostrap/80889
* acinclude.m4: Also set HAVE_AVX128 on the false
branch of LIBGFOR_CHECK_AVX128.
* configure: Regenerated.
From-SVN: r248519
PR target/79127
* acinclude.m4 (LIBGFOR_CHECK_AVX512F): Ensure the test clobbers
some zmm16+ registers to verify they are handled by unwind info
properly if needed.
* configure: Regenerated.
From-SVN: r244636
PR other/79046
* configure: Regenerated.
config/
* acx.m4 (GCC_BASE_VER): New m4 function.
(ACX_TOOL_DIRS): Require GCC_BASE_VER, for
--with-gcc-major-version-only use just major number from BASE-VER.
gcc/
* configure.ac: Add GCC_BASE_VER.
* Makefile.in (version): Use @get_gcc_base_ver@ instead of cat to get
version from BASE-VER file.
(CFLAGS-gcc.o): Add -DBASEVER=$(BASEVER_s).
(gcc.o): Depend on $(BASEVER).
* common.opt (dumpfullversion): New option.
* gcc.c (driver_handle_option): Handle OPT_dumpfullversion.
* doc/invoke.texi: Document -dumpfullversion.
* doc/install.texi: Document --with-gcc-major-version-only.
* configure: Regenerated.
libatomic/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* testsuite/Makefile.in: Regenerated.
* configure: Regenerated.
* Makefile.in: Regenerated.
libgomp/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* testsuite/Makefile.in: Regenerated.
* configure: Regenerated.
* Makefile.in: Regenerated.
libgcc/
* configure.ac: Add GCC_BASE_VER.
* Makefile.in (version): Use @get_gcc_base_ver@ instead of cat to get
version from BASE-VER file.
* configure: Regenerated.
libssp/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* configure: Regenerated.
* Makefile.in: Regenerated.
liboffloadmic/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* aclocal.m4: Include ../config/acx.m4.
* configure: Regenerated.
* Makefile.in: Regenerated.
libquadmath/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* configure: Regenerated.
* Makefile.in: Regenerated.
libmpx/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* configure: Regenerated.
* Makefile.in: Regenerated.
libada/
* configure.ac: Add GCC_BASE_VER.
* Makefile.in (version): Use @get_gcc_base_ver@ instead of cat to get
version from BASE-VER file.
* configure: Regenerated.
lto-plugin/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* configure: Regenerated.
* Makefile.in: Regenerated.
libitm/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* testsuite/Makefile.in: Regenerated.
* configure: Regenerated.
* Makefile.in: Regenerated.
fixincludes/
* configure.ac: Add GCC_BASE_VER.
* Makefile.in (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* configure: Regenerated.
libcilkrts/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* aclocal.m4: Include ../config/acx.m4.
* configure: Regenerated.
* Makefile.in: Regenerated.
libcc1/
* configure.ac: Add GCC_BASE_VER. For --with-gcc-major-version-only
use just major number from BASE-VER.
* configure: Regenerated.
* Makefile.in: Regenerated.
libobjc/
* configure.ac: Add GCC_BASE_VER.
* Makefile.in (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* configure: Regenerated.
libstdc++-v3/
* configure.ac: Add GCC_BASE_VER.
* fragment.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* po/Makefile.in: Regenerated.
* libsupc++/Makefile.in: Regenerated.
* testsuite/Makefile.in: Regenerated.
* src/Makefile.in: Regenerated.
* configure: Regenerated.
* Makefile.in: Regenerated.
* include/Makefile.in: Regenerated.
* doc/Makefile.in: Regenerated.
* python/Makefile.in: Regenerated.
* src/c++11/Makefile.in: Regenerated.
* src/c++98/Makefile.in: Regenerated.
* src/filesystem/Makefile.in: Regenerated.
libvtv/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* testsuite/Makefile.in: Regenerated.
* configure: Regenerated.
* Makefile.in: Regenerated.
libsanitizer/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* libbacktrace/Makefile.in: Regenerated.
* interception/Makefile.in: Regenerated.
* asan/Makefile.in: Regenerated.
* ubsan/Makefile.in: Regenerated.
* configure: Regenerated.
* sanitizer_common/Makefile.in: Regenerated.
* lsan/Makefile.in: Regenerated.
* Makefile.in: Regenerated.
* tsan/Makefile.in: Regenerated.
libgfortran/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* configure: Regenerated.
* Makefile.in: Regenerated.
From-SVN: r244521
* configure.ac: Auto-detect newlib function support unless we
know there are issues when configuring for a host.
* configure: Regenerate.
From-SVN: r227301
On behalf of szabolcs.nagy@arm.com
[libstdc++-v3/]
2015-04-22 Szabolcs Nagy <szabolcs.nagy@arm.com>
* config/os/generic/os_defines.h (_GLIBCXX_GTHREAD_USE_WEAK): Define.
* configure.host (os_include_dir): Set to "os/generic" for linux-musl*.
[libgfortran/]
2015-04-22 Szabolcs Nagy <szabolcs.nagy@arm.com>
* acinclude.m4 (GTHREAD_USE_WEAK): Define as 0 for *-*-musl*.
* configure: Regenerate.
From-SVN: r222329
2014-11-13 Janne Blomqvist <jb@gcc.gnu.org>
PR libfortran/60324
* configure: Regenerated.
* configure.ac (AM_CFLAGS): Add Werror=vla.
* libgfortran.h (gfc_alloca): Remove macro.
(fc_strdup_notrim): New prototype.
* intrinsics/access.c (access_func): Use fc_strdup rather than
stack allocation.
* intrinsics/chdir.c (chdir_i4_sub): Likewise.
(chdir_i8_sub): Likewise.
* intrinsics/chmod.c (chmod_internal): New function, move logic
here.
(chmod_func): Call chmod_internal.
* intrinsics/env.c (getenv): Use fc_strdup rather than stack
allocation.
(get_environment_variable_i4): Likewise.
* intrinsics/execute_command_line.c (execute_command_line):
Likewise.
* intrinsics/hostnm.c (hostnm_0): New function, use static buffer
rather than VLA.
(hostnm_i4_sub): Call hostnm_0.
(hostnm_i8_sub): Likewise.
(hostnm): Likewise.
* intrinsics/link.c (link_internal): New function, use fc_strdup
rather than stack allocation.
(link_i4_sub): Call link_internal.
(link_i8_sub): Likewise.
(link_i4): Likewise.
(link_i8): Likewise.
* intrinsics/perror.c (perror_sub): Use fc_strdup rather than
stack allocation.
* intrinsics/random.c (random_seed_i4): Use static buffer rather
than VLA, use _Static_assert to make sure it's big enough.
* intrinsics/rename.c (rename_internal): New function, use
fc_strdup rather than stack allocation.
(rename_i4_sub): Call rename_internal.
(rename_i8_sub): Likewise.
(rename_i4): Likewise.
(rename_i8): Likewise.
* intrinsics/stat.c (stat_i4_sub_0): Use fc_strdup rather than
stack allocation.
(stat_i8_sub_0): Likewise.
* intrinsics/symlink.c (symlnk_internal): New function, use
fc_strdup rather than stack allocation.
(symlnk_i4_sub): Call symlnk_internal.
(symlnk_i8_sub): Likewise.
(symlnk_i4): Likewise.
(symlnk_i8): Likewise.
* intrinsics/system.c (system_sub): Use fc_strdup rather than
stack allocation.
* intrinsics/unlink.c (unlink_i4_sub): Likewise.
* io/file_pos.c (READ_CHUNK): Make it a macro rather than variable.
* io/list_read.c (nml_get_obj_data): Use fixed stack buffer, fall
back to xmalloc/free for large sizes.
* io/read.c (read_f): Likewise.
* io/transfer.c (MAX_READ): Make it a macro rather than variable.
(WRITE_CHUNK): Likewise.
* io/write_float.def (write_float): Use fixed stack buffer, fall
back to xmalloc/free for large sizes.
* runtime/string.c (fc_strdup_notrim): New function.
From-SVN: r217480
2014-11-10 Janne Blomqvist <jb@gcc.gnu.org>
PR libfortran/47007
PR libfortran/61847
* config.h.in: Regenerated.
* configure: Regenerated.
* configure.ac (AC_CHECK_HEADERS_ONCE): Check for xlocale.h.
(AC_CHECK_FUNCS_ONCE): Check for newlocale, freelocale, uselocale,
strerror_l.
* io/io.h (locale.h): Include.
(xlocale.h): Include if present.
(c_locale): New variable.
(old_locale): New variable.
(old_locale_ctr): New variable.
(old_locale_lock): New variable.
(st_parameter_dt): Add old_locale member.
* io/transfer.c (data_transfer_init): Set locale to "C" if doing
formatted transfer.
(finalize_transfer): Reset locale to previous.
* io/unit.c (c_locale): New variable.
(old_locale): New variable.
(old_locale_ctr): New variable.
(old_locale_lock): New variable.
(init_units): Init c_locale, init old_locale_lock.
(close_units): Free c_locale.
* runtime/error.c (locale.h): Include.
(xlocale.h): Include if present.
(gf_strerror): Use strerror_l if available. Reset locale to
LC_GLOBAL_LOCALE for strerror_r branch.
2014-11-10 Janne Blomqvist <jb@gcc.gnu.org>
PR libfortran/47007
PR libfortran/61847
* gfortran.texi: Add note about locale issues to thread-safety
section.
From-SVN: r217273
PR fortran/29383
gcc/fortran/
* gfortran.h (gfc_simplify_ieee_selected_real_kind): New prototype.
* libgfortran.h (GFC_FPE_*): Use simple integer values, valid in
both C and Fortran.
* expr.c (gfc_check_init_expr): Simplify IEEE_SELECTED_REAL_KIND.
* simplify.c (gfc_simplify_ieee_selected_real_kind): New function.
* module.c (mio_symbol): Keep track of symbols which came from
intrinsic modules.
(gfc_use_module): Keep track of the IEEE modules.
* trans-decl.c (gfc_get_symbol_decl): Adjust code since
we have new intrinsic modules.
(gfc_build_builtin_function_decls): Build decls for
ieee_procedure_entry and ieee_procedure_exit.
(is_from_ieee_module, is_ieee_module_used, save_fp_state,
restore_fp_state): New functions.
(gfc_generate_function_code): Save and restore floating-point
state on procedure entry/exit, when IEEE modules are used.
* intrinsic.texi: Document the IEEE modules.
libgfortran/
* configure.host: Add checks for IEEE support, rework priorities.
* configure.ac: Define IEEE_SUPPORT, check for fpsetsticky and
fpresetsticky.
* configure: Regenerate.
* Makefile.am: Build new ieee files, install IEEE_* modules.
* Makefile.in: Regenerate.
* gfortran.map (GFORTRAN_1.6): Add new symbols.
* libgfortran.h (get_fpu_trap_exceptions, set_fpu_trap_exceptions,
support_fpu_trap, set_fpu_except_flags, support_fpu_flag,
support_fpu_rounding_mode, get_fpu_state, set_fpu_state): New
prototypes.
* config/fpu-*.h (get_fpu_trap_exceptions,
set_fpu_trap_exceptions, support_fpu_trap, set_fpu_except_flags,
support_fpu_flag, support_fpu_rounding_mode, get_fpu_state,
set_fpu_state): New functions.
* ieee/ieee_features.F90: New file.
* ieee/ieee_exceptions.F90: New file.
* ieee/ieee_arithmetic.F90: New file.
* ieee/ieee_helper.c: New file.
gcc/testsuite/
* lib/target-supports.exp (check_effective_target_fortran_ieee):
New function.
* gfortran.dg/ieee/ieee.exp: New file.
* gfortran.dg/ieee/ieee_1.F90: New file.
* gfortran.dg/ieee/ieee_2.f90: New file.
* gfortran.dg/ieee/ieee_3.f90: New file.
* gfortran.dg/ieee/ieee_4.f90: New file.
* gfortran.dg/ieee/ieee_5.f90: New file.
* gfortran.dg/ieee/ieee_6.f90: New file.
* gfortran.dg/ieee/ieee_7.f90: New file.
* gfortran.dg/ieee/ieee_rounding_1.f90: New file.
From-SVN: r212102
2013-11-10 Janne Blomqvist <jb@gcc.gnu.org>
* configure.ac: Check presence of mkostemp.
* io/unix.c (set_close_on_exec): New function.
(tempfile_open): Use mkostemp and O_CLOEXEC if available, fallback
to calling set_close_on_exec.
(regular_file): Add O_CLOEXEC to flags if defined.
(open_external): Call set_close_on_exec if O_CLOEXEC is not
defined.
* config.h.in: Regenerated.
* configure: Regenerated.
* Makefile.in: Regenerated.
* aclocal.m4: Regenerated.
From-SVN: r204654
