All VNx2 V_INT_CONTAINER entries should map to VNx2DI. The lower-case
version was already correct.
2019-12-27 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* config/aarch64/iterators.md (V_INT_CONTAINER): Fix VNx2SF entry.
gcc/testsuite/
* gcc.target/aarch64/sve/mixed_size_11.c: New test.
From-SVN: r279743
The fold-left reduction code has a (rarely-used) fallback that handles
cases in which the loop is fully-masked and the target has no native
support for the reduction. The fallback includea a VEC_COND_EXPR
between the reduction vector and a safe value, so we should check
whether that VEC_COND_EXPR is supported.
2019-12-27 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* tree-vect-loop.c (vectorizable_reduction): Check whether the
target supports the required VEC_COND_EXPR operation before
allowing the fallback handling of masked fold-left reductions.
gcc/testsuite/
* gcc.target/aarch64/sve/mixed_size_10.c: New test.
From-SVN: r279742
PR c++/92438
* parser.c (cp_parser_constructor_declarator_p): If open paren
is followed by RID_ATTRIBUTE, skip over the attribute tokens and
try to parse type specifier.
* g++.dg/ext/attrib61.C: New test.
From-SVN: r279736
When cross-building for vxworks, test for declarations of long double
functions in math.h. We don't normally test for these functions when
cross compiling, because link tests don't work, or ever really, but
not defining them as available causes replacements to be defined in
ways that may cause duplicate definition linker errors if the units
defining both the replacement and the actual implementation are
brought in because of other symbols.
for libstdc++-v3/ChangeLog
* crossconfig.m4 (GLIBCXX_CROSSCONFIG) [*-vxworks*]: Define
long double functions as available if declared by math.h.
(GLIBCXX_CHECK_MATH_DECL, GLIBCXX_CHECK_MATH_DECLS): New.
* configure: Rebuild.
From-SVN: r279731
Previously, limited unrolling was enabled at O2 for powerpc in r278034. At that
time, -fweb and -frename-registers were not enabled together with -funroll-loops
even for -O3. After that, we notice there are some performance degradations on
SPEC2006fp which caused by without web and rnreg. This patch enable -fweb
and -frename-registers for -funroll-loops to align original behavior before
r278034.
gcc/
2019-12-23 Jiufu Guo <guojiufu@linux.ibm.com>
* config/rs6000/rs6000.c (rs6000_option_override_internal): Enable
-fweb and -frename-registers with -funroll-loops
From-SVN: r279725
As Jason pointed out in the review of the C++ gnu_vector_type_p patch:
https://gcc.gnu.org/ml/gcc-patches/2019-12/msg00173.html
the real fix for the XFAILs in acle/general-c++/gnu_vectors_*.C is to
make same_type_p return false for two types if one is gnu_vector_type_p
and the other isn't. This patch does that and fixes the fallout.
Originally I'd tried to make it so that "X *" and "Y *" are
interconvertible whenever X and Y are, and similarly for
"X &" and "Y &". That doesn't fall out naturally though,
and is different from how -flax-vector-conversions works.
The patch therefore accepts all the consequences of making
X and Y !same_type_p instead of trying to work around them.
2019-12-23 Richard Sandiford <richard.sandiford@arm.com>
gcc/cp/
PR c++/92789
* typeck.c (structural_comptypes): Make sure that two vector types
agree on gnu_vector_type_p.
gcc/testsuite/
PR c++/92789
* g++.dg/ext/sve-sizeless-2.C (statements): Expect pointer
difference and comparisons between GNU and non-GNU types
to be rejected. Expect __is_same to be false for such pairs.
* g++.target/aarch64/sve/acle/general-c++/gnu_vectors_1.C: Remove
XFAILs. Expect conversions between SVE vector pointers and
GNU vector pointers to be rejected. Test references.
* g++.target/aarch64/sve/acle/general-c++/gnu_vectors_2.C: Likewise.
From-SVN: r279717
This test:
typedef unsigned int v4si __attribute__ ((vector_size(16)));
typedef unsigned char v16qi __attribute__ ((vector_size(16)));
extern v16qi x;
v4si &y = x;
ICEs with:
a.c:4:11: internal compiler error: in convert_like_real, at cp/call.c:7670
This started with r260780, which had the effect of making lvalue_kind
look through VIEW_CONVERT_EXPR in all cases, not just for location
wrappers. This also means that:
typedef unsigned int v4si __attribute__ ((vector_size(16)));
typedef unsigned char v16qi __attribute__ ((vector_size(16)));
extern v16qi x;
v4si &y = reinterpret_cast<v4si>(x);
is now valid despite the result of the cast being an rvalue.
The patch attempts to fix that by calling rvalue on the input to the
conversion, so that the tree looks the same as for:
extern v16qi x;
v4si &y = (v4si)x;
which is already handled correctly.
2019-12-23 Richard Sandiford <richard.sandiford@arm.com>
gcc/cp/
* cvt.c (ocp_convert): Apply rvalue to the source of vector
conversions.
* typeck.c (build_reinterpret_cast_1): Likewise.
gcc/testsuite/
* g++.dg/ext/vector39.C: New test.
From-SVN: r279716
Add generic support for the OpenACC 2.6 `acc_get_property' and
`acc_get_property_string' routines, as well as full handlers for the
host and the NVPTX offload targets and minimal handlers for the HSA,
Intel MIC, and AMD GCN offload targets.
Included are C/C++ and Fortran tests that, in particular, print
the property values for acc_property_vendor, acc_property_memory,
acc_property_free_memory, acc_property_name, and acc_property_driver.
The output looks as follows:
Vendor: GNU
Name: GOMP
Total memory: 0
Free memory: 0
Driver: 1.0
with the host driver (where the memory related properties are not
supported for the host device and yield 0, conforming to the standard)
and output like:
Vendor: Nvidia
Total memory: 12651462656
Free memory: 12202737664
Name: TITAN V
Driver: CUDA Driver 9.1
with the NVPTX driver.
2019-12-22 Maciej W. Rozycki <macro@codesourcery.com>
Frederik Harwath <frederik@codesourcery.com>
Thomas Schwinge <tschwinge@codesourcery.com>
include/
* gomp-constants.h (gomp_device_property): New enum.
libgomp/
* libgomp.h (gomp_device_descr): Add `get_property_func' member.
* libgomp-plugin.h (gomp_device_property_value): New union.
(gomp_device_property_value): New prototype.
* openacc.h (acc_device_t): Add `acc_device_current' enumeration
constant.
(acc_device_property_t): New enum.
(acc_get_property, acc_get_property_string): New prototypes.
* oacc-init.c (acc_get_device_type): Also assert that result
is not `acc_device_current'.
(get_property_any, acc_get_property, acc_get_property_string):
New functions.
* openacc.f90 (openacc_kinds): Add `acc_device_current' and
`acc_property_memory', `acc_property_free_memory',
`acc_property_name', `acc_property_vendor' and
`acc_property_driver' constants. Add `acc_device_property' data
type.
(openacc_internal): Add `acc_get_property' and
`acc_get_property_string' interfaces. Add `acc_get_property_h',
`acc_get_property_string_h', `acc_get_property_l' and
`acc_get_property_string_l'.
* oacc-host.c (host_get_property): New function.
(host_dispatch): Wire it.
* target.c (gomp_load_plugin_for_device): Handle `get_property'.
* libgomp.map (OACC_2.6): Add `acc_get_property', `acc_get_property_h_',
`acc_get_property_string' and `acc_get_property_string_h_' symbols.
* libgomp.texi (OpenACC Runtime Library Routines): Add
`acc_get_property'.
(acc_get_property): New node.
* plugin/plugin-gcn.c (GOMP_OFFLOAD_get_property): New
function (stub).
* plugin/plugin-hsa.c (GOMP_OFFLOAD_get_property): New function.
* plugin/plugin-nvptx.c (CUDA_CALLS): Add `cuDeviceGetName',
`cuDeviceTotalMem', `cuDriverGetVersion' and `cuMemGetInfo'
calls.
(GOMP_OFFLOAD_get_property): New function.
(struct ptx_device): Add new field "name".
(cuda_driver_version_s): Add new static variable ...
(nvptx_init): ... and init from here.
* testsuite/libgomp.oacc-c-c++-common/acc_get_property.c: New test.
* testsuite/libgomp.oacc-c-c++-common/acc_get_property-2.c: New test.
* testsuite/libgomp.oacc-c-c++-common/acc_get_property-3.c: New test.
* testsuite/libgomp.oacc-c-c++-common/acc_get_property-aux.c: New file
with test helper functions.
* testsuite/libgomp.oacc-fortran/acc_get_property.f90: New test.
liboffloadmic/
* plugin/libgomp-plugin-intelmic.cpp (GOMP_OFFLOAD_get_property):
New function.
Reviewed-by: Thomas Schwinge <thomas@codesourcery.com>
Co-Authored-By: Frederik Harwath <frederik@codesourcery.com>
Co-Authored-By: Thomas Schwinge <tschwinge@codesourcery.com>
From-SVN: r279710
Fix a problem with the libgomp testsuite using a method to determine
the compiler to use resulting in the tool being different from one the
library has been built with, and causing a catastrophic failure from the
lack of a suitable `--sysroot=' option where the `--with-build-sysroot='
configuration option has been used to build the compiler resulting in
the inability to link executables.
Address this problem by defining the compiler to use, via the
GCC_UNDER_TEST TCL variable, set in the DejaGNU configuration file from
$CC by autoconf, which will have all the required options set for the
target compiler to build executables in the environment configured,
removing failures like:
.../bin/riscv64-linux-gnu-ld: cannot find crt1.o: No such file or directory
.../bin/riscv64-linux-gnu-ld: cannot find -lm
.../bin/riscv64-linux-gnu-ld: cannot find -lpthread
.../bin/riscv64-linux-gnu-ld: cannot find -lc
.../bin/riscv64-linux-gnu-ld: cannot find -latomic
collect2: error: ld returned 1 exit status
compiler exited with status 1
FAIL: libgomp.c/../libgomp.c-c++-common/atomic-18.c (test for excess errors)
Excess errors:
.../bin/riscv64-linux-gnu-ld: cannot find crt1.o: No such file or directory
.../bin/riscv64-linux-gnu-ld: cannot find -lm
.../bin/riscv64-linux-gnu-ld: cannot find -lpthread
.../bin/riscv64-linux-gnu-ld: cannot find -lc
.../bin/riscv64-linux-gnu-ld: cannot find -latomic
UNRESOLVED: libgomp.c/../libgomp.c-c++-common/atomic-18.c compilation failed to produce executable
and bringing overall test results for the `riscv64-linux-gnu' target
(here with the `x86_64-linux-gnu' host and RISC-V QEMU in the Linux user
emulation mode as the target board) from:
=== libgomp Summary ===
# of expected passes 44
# of unexpected failures 3274
# of unresolved testcases 3241
# of unsupported tests 548
to:
=== libgomp Summary ===
# of expected passes 6834
# of unexpected failures 4
# of expected failures 4
# of unsupported tests 518
libgomp/
* testsuite/libgomp-test-support.exp.in (GCC_UNDER_TEST): New
variable.
From-SVN: r279708
Fix a catastrophic libgo testsuite failure in cross-compilation where
the shared `libgcc_s' library cannot be found by the loader at run time
in build-tree testing and consequently all test cases fail the execution
stage, giving output (here with the `x86_64-linux-gnu' host and the
`riscv64-linux-gnu' target, with RISC-V QEMU in the Linux user emulation
mode as the target board) like:
spawn qemu-riscv64 -E LD_LIBRARY_PATH=.:.../riscv64-linux-gnu/lib64/lp64d/libgo/.libs ./a.exe
./a.exe: error while loading shared libraries: libgcc_s.so.1: cannot open shared object file: No such file or directory
FAIL: archive/tar
To do so rework `gcc-set-multilib-library-path' so as not to rely on the
`rootme' TCL variable to have been preset in testsuite invocation, which
only works for the GCC test suites and not for library test suites, and
also use `remote_exec host' rather than `exec' to invoke the compiler in
determination of `libgcc_s' locations, so that the solution works in
remote testing as well while also avoiding the hardcoded limit of the
executable's path length imposed by `exec'.
This is based on an observation that the multilib root directory can be
determined by stripping out the multilib directory in effect as printed
with the `-print-multi-directory' option from the path produced by the
`-print-file-name=' option. And then individual full multilib paths can
be assembled for the other multilibs by appending their respective
multilib directories to the multilib root directory.
Unlike with the old solution the full multilib paths are not checked for
the presence of the shared `libgcc_s' library there, but that is
supposed to be harmless. Also the full multilib path for the multilib
used with the compiler used for testing will now come first, which
should reduce run-time processing in the usual case.
With this change in place test output instead looks like:
spawn qemu-riscv64 -E LD_LIBRARY_PATH=.:.../riscv64-linux-gnu/lib64/lp64d/libgo/.libs:..././gcc/lib64/lp64d:..././gcc/.:..././gcc/lib32/ilp32:..././gcc/lib32/ilp32d:..././gcc/lib64/lp64 ./a.exe
PASS
PASS: archive/tar
No summary comparison, because the libgo testsuite does not provide one
in this configuration for some reason, however this change improves
overall results from 0 PASSes and 159 FAILs to 133 PASSes and 26 FAILs.
gcc/testsuite/
* lib/gcc-defs.exp (gcc-set-multilib-library-path): Use
`-print-file-name=' to determine the multilib root directory.
Use `remote_exec host' rather than `exec' to invoke the
compiler.
From-SVN: r279706
Provide a default value of $(toolexeclibdir) for $(ADA_RTL_DSO_DIR), so
that in a `--disable-libada' configuration `make install' places shared
gnatlib libraries, built with `make -C gcc gnatlib-shared', in their
intended version-specific location, fixing a commit r276424 ("libada:
Respect `--enable-version-specific-runtime-libs'") regression.
gcc/ada/
* gcc-interface/Makefile.in (toolexeclibdir): New variable.
From-SVN: r279702
PASS: libgomp.c/target-link-1.c (test for excess errors)
[-PASS:-]{+FAIL:+} libgomp.c/target-link-1.c execution test
We need to revert one line of code change from r279625.
libgomp/
* target.c (gomp_map_vars_internal): Restore 'omp declare target
link' handling.
From-SVN: r279701
2019-12-21 Paul Thomas <pault@gcc.gnu.org>
PR fortran/92753
* expr.c (find_inquiry_ref): Catch INQUIRY_LEN case, where the
temporary expression has been converted to a constant and make
the new expression accordingly. Correct the error in INQUIRY_RE
and INQUIRY_IM cases. The original rather than the resolved
expression was being used as the source in mpfr_set.
2019-12-21 Paul Thomas <pault@gcc.gnu.org>
PR fortran/92753
* gfortran.dg/inquiry_type_ref_5.f90 : New test.
From-SVN: r279696
2019-12-21 Martin Jambor <mjambor@suse.cz>
PR ipa/93015
* ipa-cp.c (ipcp_store_vr_results): Check that info exists
testsuite/
* gcc.dg/lto/pr93015_0.c: New test.
From-SVN: r279695
In r268428 I changed reshape_init_r in such a way that when it sees
a nested { } in a CONSTRUCTOR with missing braces, it just returns
the initializer:
+ else if (COMPOUND_LITERAL_P (stripped_init)
...
+ ++d->cur;
+ gcc_assert (!BRACE_ENCLOSED_INITIALIZER_P (stripped_init));
+ return init;
But as this test shows, that's incorrect: if TYPE is an array, we need
to proceed to reshape_init_array_1 which will iterate over the array
initializers:
6006 /* Loop until there are no more initializers. */
6007 for (index = 0;
6008 d->cur != d->end && (!sized_array_p || index <= max_index_cst);
6009 ++index)
6010 {
and update d.cur accordingly. In other words, when reshape_init gets
{{col[0][0], col[1][0], col[2][0], col[3][0]},
{col[0][1], col[1][1], col[2][1], col[3][1]},
{col[0][2], col[1][2], col[2][2], col[3][2]},
{col[0][3], col[1][3], col[2][3], col[3][3]}}
we recurse on the first element:
{col[0][0], col[1][0], col[2][0], col[3][0]}
and we can't just move d.cur to point to
{col[0][1], col[1][1], col[2][1], col[3][1]}
and return; we need to iterate, so that d.cur ends up being properly
updated, and after all initializers have been seen, points to d.end.
Currently we skip the loop, wherefore we hit this:
6502 /* Make sure all the element of the constructor were used. Otherwise,
6503 issue an error about exceeding initializers. */
6504 if (d.cur != d.end)
6505 {
6506 if (complain & tf_error)
6507 error ("too many initializers for %qT", type);
6508 return error_mark_node;
6509 }
* decl.c (reshape_init_r): For a nested compound literal, do
call reshape_init_{class,array,vector}.
* g++.dg/cpp0x/initlist118.C: New test.
From-SVN: r279686
build_min_non_dep wasn't setting any location so when we were emitting the
warning in the following test while instantiating a template, its location
was UNKNOWN_LOCATION. Rather than adding a location_t parameter, let's use
the location from the original expression.
* tree.c (build_min_non_dep): Use the location of NON_DEP when
building the expression.
* g++.dg/diagnostic/enum1.C: New test.
* g++.dg/gomp/loop-2.C: Adjust dg-error.
* g++.dg/gomp/for-21.C: Likewise.
From-SVN: r279685
PR c++/92965
* pt.c (invalid_nontype_parm_type_p): Call structural_type_p with
explain=true only if emitting error.
* g++.dg/cpp2a/nontype-class27.C: New test.
From-SVN: r279684
PR c++/92666
* call.c (convert_arg_to_ellipsis): For floating point or
decltype(nullptr) arguments call mark_rvalue_use.
* g++.dg/warn/Wunused-var-36.C: New test.
From-SVN: r279681
PR c++/92992
* call.c (convert_arg_to_ellipsis): For decltype(nullptr) arguments
that have side-effects use cp_build_compound_expr.
* g++.dg/cpp0x/nullptr45.C: New test.
From-SVN: r279680
2019-12-20 Michael Meissner <meissner@linux.ibm.com>
* config/rs6000/predicates.md (cint34_operand): Use
SIGNED_INTEGER_34BIT_P macro.
* config/rs6000/rs6000.c (num_insns_constant_gpr): Use the
SIGNED_INTEGER_16BIT_P and SIGNED_INTEGER_34BIT_P macros.
(address_to_insn_form): Use the SIGNED_INTEGER_16BIT_P and
SIGNED_INTEGER_34BIT_P macros.
* config/rs6000/rs6000.h (SIGNED_INTEGER_NBIT_P): New macro.
(SIGNED_INTEGER_16BIT_P): Rename SIGNED_16BIT_OFFSET_P to be
SIGNED_INTEGER_34BIT_P.
(SIGNED_INTEGER_34BIT_P): Rename SIGNED_34BIT_OFFSET_P to be
SIGNED_INTEGER_34BIT_P.
From-SVN: r279677
The testcase was originally committed with an incorrect changelog and PR
number. The changelog was fixed later, but not the comment in the test.
PR fortran/69497
* gfortran.dg/pr69497.f90: Fix PR number in comment.
From-SVN: r279657
Originally these functions were always inline. I changed them in r277342
to be always constexpr, then in r277588 changed them to be constexpr for
C++14, but I didn't restore the 'inline' for C++11. That leads to linker
errors when libstdc++.so is built unoptimized, because those functions
don't get instantiated in src/c++11/string-inst.o
PR libstdc++/92927
* include/bits/alloc_traits.h (__alloc_on_copy, __alloc_on_move)
(__alloc_on_swap): Add inline specifier.
From-SVN: r279656
