gcc/
PR target/64659
* config/sh/predicates.md (atomic_arith_operand,
atomic_logical_operand): Remove.
* config/sh/sync.md (fetchop_predicate, fetchop_constraint): Remove.
(atomic_arith_operand_0): New predicate.
(atomic_compare_and_swap<mode>): Use arith_reg_dest for output values.
Use atomic_arith_operand_0 for input values.
(atomic_compare_and_swapsi_hard, atomic_compare_and_swap<mode>_hard,
atomic_compare_and_swap<mode>_soft_gusa,
atomic_compare_and_swap<mode>_soft_tcb,
atomic_compare_and_swap<mode>_soft_imask): Use arith_reg_dest and
arith_reg_operand instead of register_operand.
(atomic_exchange<mode>): Use arith_reg_dest for output value. Use
atomic_arith_operand_0 for newval input.
(atomic_exchangesi_hard, atomic_exchange<mode>_hard,
atomic_exchange<mode>_soft_gusa, atomic_exchange<mode>_soft_tcb,
atomic_exchange<mode>_soft_imask): Use arith_reg_dest and
arith_reg_operand instead of register_operand.
(atomic_arith_operand_1, atomic_logical_operand_1): New predicates.
fetchop_predicate_1, fetchop_constraint_1_llcs,
fetchop_constraint_1_gusa, fetchop_constraint_1_tcb,
fetchop_constraint_1_imask): New code iterator attributes.
(atomic_fetch_<fetchop_name><mode>): Use arith_reg_dest instead of
register_operand. Use fetchop_predicate_1.
(atomic_fetch_<fetchop_name>si_hard,
atomic_fetch_<fetchop_name><mode>_hard): Use arith_reg_dest instead of
register_operand. Use fetchop_predicate_1, fetchop_constraint_1_llcs.
(atomic_fetch_<fetchop_name><mode>_soft_gusa): Use arith_reg_dest
and arith_reg_operand instead of register_operand. Use
fetchop_predicate_1, fetchop_constraint_1_gusa.
(atomic_fetch_<fetchop_name><mode>_soft_tcb): Use arith_reg_dest
and arith_reg_operand instead of register_operand. Use
fetchop_predicate_1, fetchop_constraint_1_tcb. Adjust asm sequence
to allow R0 usage.
(atomic_fetch_<fetchop_name><mode>_soft_imask): Use arith_reg_dest
and arith_reg_operand instead of register_operand. Use
fetchop_predicate_1, fetchop_constraint_1_imask. Adjust asm sequence
to allow R0 usage.
(atomic_fetch_nand<mode>): Use arith_reg_dest instead of
register_operand. Use atomic_logical_operand_1.
(atomic_fetch_nandsi_hard, atomic_fetch_nand<mode>_hard,
atomic_fetch_nand<mode>_soft_gusa): Use arith_reg_dest and
arith_reg_operand instead of register_operand.
(atomic_fetch_nand<mode>_soft_tcb, atomic_fetch_nand<mode>_soft_imask):
Use arith_reg_dest and arith_reg_operand instead of register_operand.
Use logical_operand and rK08. Adjust asm sequence to allow R0 usage.
(atomic_<fetchop_name>_fetch<mode>): Use arith_reg_dest instead of
register_operand. Use fetchop_predicate_1.
(atomic_<fetchop_name>_fetchsi_hard,
atomic_<fetchop_name>_fetch<mode>_hard): Use arith_reg_dest and
arith_reg_operand instead of register_operand. Use fetchop_predicate_1,
fetchop_constraint_1_llcs.
(atomic_<fetchop_name>_fetch<mode>_soft_gusa): Use arith_reg_dest and
arith_reg_operand instead of register_operand. Use fetchop_predicate_1,
fetchop_constraint_1_gusa.
(atomic_<fetchop_name>_fetch<mode>_soft_tcb): Use arith_reg_dest and
arith_reg_operand instead of register_operand. Use fetchop_predicate_1,
fetchop_constraint_1_tcb. Adjust asm sequence to allow R0 usage.
(atomic_<fetchop_name>_fetch<mode>_soft_imask): Use arith_reg_dest and
arith_reg_operand instead of register_operand. Use fetchop_predicate_1,
fetchop_constraint_1_imask. Adjust asm sequence to allow R0 usage.
(atomic_nand_fetch<mode>): Use arith_reg_dest instead of
register_operand. Use atomic_logical_operand_1.
(atomic_nand_fetchsi_hard, atomic_nand_fetch<mode>_hard,
atomic_nand_fetch<mode>_soft_gusa): Use arith_reg_dest and
arith_reg_operand instead of register_operand.
(atomic_nand_fetch<mode>_soft_tcb): Use arith_reg_dest and
arith_reg_operand instead of register_operand. Use logical_operand
and K08. Adjust asm sequence to allow R0 usage.
(atomic_nand_fetch<mode>_soft_imask): Use arith_reg_dest and
arith_reg_operand instead of register_operand. Use logical_operand
and K08.
gcc/testsuite/
PR target/64659
* gcc.target/sh/sh.exp
(check_effective_target_atomic_model_soft_gusa_available,
check_effective_target_atomic_model_soft_tcb_available,
check_effective_target_atomic_model_soft_imask_available,
check_effective_target_atomic_model_hard_llcs_available): New.
* gcc.target/sh/pr64659-0.h: New.
* gcc.target/sh/pr64659-1.c: New.
* gcc.target/sh/pr64659-2.c: New.
* gcc.target/sh/pr64659-3.c: New.
* gcc.target/sh/pr64659-4.c: New.
From-SVN: r220217
PR other/63504
* dwarf2out.c (add_AT_wide, mem_loc_descriptor, loc_descriptor):
Use ggc_alloc<wide_int> instead of ggc_cleared_alloc<wide_int>.
(attr_checksum, attr_checksum_ordered, hash_loc_operands): Checksum
only get_full_len HOST_WIDE_INTs from get_val () array rather than
all bits in *val_wide.
From-SVN: r220216
* fixincl.tpl: add a check sum acceptance test
* fixlib.h: enumerate it
* fixincl.c: handle it
* README: document it and document the handling of test_text
From-SVN: r220215
gcc/
PR tree-optimization/64277
* tree-ssa-loop-niter.c (record_nonwrapping_iv): Use base
range info when possible to refine estimation.
gcc/testsuite/
PR tree-optimization/64277
* gcc.dg/pr64277.c: New.
From-SVN: r220204
2015-01-28 Thomas Preud'homme <thomas.preudhomme@arm.com>
gcc/
PR tree-optimization/64718
* tree-ssa-math-opts.c (pass_optimize_bswap::execute): Make bswap_type
be a 16bit unsigned integer when n->range is 16.
(bswap_replace): Convert src to that type if necessary for all bswap
sizes. Fix rotation right notation in nearby comment. Use bswap_type
set in pass_optimize_bswap::execute ().
gcc/testsuite/
PR tree-optimization/64718
* gcc.c-torture/execute/pr64718.c: New test.
From-SVN: r220203
gcc/ChangeLog:
* toplev.c (print_version): Add param "show_global_state", and
only print GGC and plugin information if it is true.
(init_asm_output): Pass in "true" for the new param when calling
print_version.
(process_options): Likewise.
(toplev::main): Likewise.
* toplev.h (print_version): Add new param to decl.
gcc/jit/ChangeLog:
* docs/internals/test-hello-world.exe.log.txt: Add example version
lines.
* jit-common.h (gcc::jit::dump::get_file): New accessor.
* jit-logging.c: Include toplev.h.
(gcc::jit::logger::logger): Log the GCC version.
* jit-recording.c: Include toplev.h.
(gcc:jit::recording::context::dump_reproducer_to_file): Log the
GCC version.
From-SVN: r220190
2015-01-27 Bernd Edlinger <bernd.edlinger@hotmail.de>
Fix build under cygwin/64.
* adaint.h: Add check for __CYGWIN__.
* mingw32.h: Prevent windows.h from including x86intrin.h in GCC.
From-SVN: r220180
2015-01-27 Richard Biener <rguenther@suse.de>
* tree-vrp.c (update_value_range): Intersect the range with
old recorded SSA name range information.
From-SVN: r220164
* config/rl78/rl78.c (rl78_expand_prologue): In G10 mode push the
BC, DE and HL registers directly, not via AX.
When decrementing the stack pointer by a large amount, transfer SP
into AX and perform the subtraction there.
(rl78_expand_epilogue): Perform the inverse of the above
enhancements.
From-SVN: r220163
* config/rl78/cmpsi2.S: Use function start and end macros.
(__gcc_bcmp): New function.
* config/rl78/lshrsi3.S: Use function start and end macros.
* config/rl78/mulsi3.S: Add support for G10.
(__mulqi3): New function for G10.
* config/rl78/signbit.S: Use function start and end macros.
* config/rl78/t-rl78 (LIB2ADD): Add bit-count.S, fpbit-sf.S and
fpmath-sf.S.
(LIB2FUNCS_EXCLUDE): Define.
(LIB2FUNCS_ST): Define.
* config/rl78/trampoline.S: Use function start and end macros.
* config/rl78/vregs.h (START_FUNC): New macro.
(START_ANOTHER_FUNC): New macro.
(END_FUNC): New macro.
(END_ANOTHER_FUNC): New macro.
* config/rl78/bit-count.S: New file. Contains assembler
implementations of the bit counting functions: ___clzhi2,
__clzsi2, ctzhi2, ctzsi2, ffshi2, ffssi2, __partityhi2,
__paritysi2, __popcounthi2 and __popcountsi2.
* config/rl78/fpbit-sf.S: New file. Contains assembler
implementationas of the math functions: __negsf2, __cmpsf2,
__eqsf2, __nesf2, __lesf2, __ltsf2, __gesf2, gtsf2, __unordsf2,
__fixsfsi, __fixunssfsi, __floatsisf and __floatunssisf.
* config/rl78/fpmath-sf.S: New file. Contains assembler
implementations of the math functions: __subsf3, __addsf3,
__mulsf3 and __divsf3
From-SVN: r220162
PR ipa/64776
* cgraphunit.c (cgraph_node::expand_thunk): If not this_adjusting,
handle the first argument in the same loop as all the other arguments.
From-SVN: r220156
