When compiling atomic-generic.c from the libatomic testsuite, we run into:
...
$ gcc src/libatomic/testsuite/libatomic.c/atomic-generic.c -latomic
src/libatomic/testsuite/libatomic.c/atomic-generic.c: In function ‘main’:
src/libatomic/testsuite/libatomic.c/atomic-generic.c:31:7: warning: \
implicit declaration of function ‘memcmp’ [-Wimplicit-function-declaration]
if (memcmp (&a, &zero, size))
^~~~~~
...
Fix this by adding the missing string.h include.
Tested on x86_64.
libatomic/ChangeLog:
* testsuite/libatomic.c/atomic-generic.c: Include string.h.
The following patch adds streaming of edge goto_locus (both LOCATION_LOCUS
and LOCATION_BLOCK from it), the PR shows a testcase (inappropriate for
gcc testsuite) where the lack of streaming of goto_locus results in worse
debug info.
Earlier version of the patch (without the output_function changes) failed
miserably, because on the order mismatch - input_function would
first input_cfg, then input_eh_regions and then input_bb (all of which now
have locations), while output_function used output_eh_regions, then output_bb
and then output_cfg. *_cfg went to a separate stream...
Now, is there a reason why the order is different?
If the intent is that the cfg could be read separately from the rest of
function or vice versa, alternatively we'd need to clear_line_info ();
before output_eh_regions and before/after output_cfg to make them
independent.
2020-09-07 Jakub Jelinek <jakub@redhat.com>
PR debug/94235
* lto-streamer-out.c (output_cfg): Also stream goto_locus for edges.
Use bp_pack_var_len_unsigned instead of streamer_write_uhwi to stream
e->dest->index and e->flags.
(output_function): Call output_cfg before output_ssa_name, rather than
after streaming all bbs.
* lto-streamer-in.c (input_cfg): Stream in goto_locus for edges.
Use bp_unpack_var_len_unsigned instead of streamer_read_uhwi to stream
in dest_index and edge_flags.
The following adds the capability to code-generate live lanes in
basic-block vectorization using lane extracts from vector stmts
rather than keeping the original scalar code around for those.
This eventually makes previously not profitable vectorizations
profitable (the live scalar code was appropriately costed so
are the lane extracts now), without considering the cost model
this patch doesn't add or remove any basic-block vectorization
capabilities.
The patch re/ab-uses STMT_VINFO_LIVE_P in basic-block vectorization
mode to tell whether a live lane is vectorized or whether it is
provided by means of keeping the scalar code live.
The patch is a first step towards vectorizing sequences of
stmts that do not end up in stores or vector constructors though.
Bootstrapped and tested on x86_64-unknown-linux-gnu.
2020-09-04 Richard Biener <rguenther@suse.de>
* tree-vectorizer.h (vectorizable_live_operation): Adjust.
* tree-vect-loop.c (vectorizable_live_operation): Vectorize
live lanes out of basic-block vectorization nodes.
* tree-vect-slp.c (vect_bb_slp_mark_live_stmts): New function.
(vect_slp_analyze_operations): Analyze live lanes and their
vectorization possibility after the whole SLP graph is final.
(vect_bb_slp_scalar_cost): Adjust for vectorized live lanes.
* tree-vect-stmts.c (can_vectorize_live_stmts): Adjust.
(vect_transform_stmt): Call can_vectorize_live_stmts also for
basic-block vectorization.
* gcc.dg/vect/bb-slp-46.c: New testcase.
* gcc.dg/vect/bb-slp-47.c: Likewise.
* gcc.dg/vect/bb-slp-32.c: Adjust.
gcc/testsuite/ChangeLog:
* gcc.target/i386/pr92658-avx512bw-trunc.c: Add
-mprefer-vector-width=512 to avoid impact of different default
tune which gcc is built with.
Array concatenate expressions were creating more SAVE_EXPRs than what
was necessary. The internal error itself was the result of a forced
temporary being made on a TREE_ADDRESSABLE type.
gcc/d/ChangeLog:
PR d/96924
* expr.cc (ExprVisitor::visit (CatAssignExp *)): Don't force
temporaries needlessly.
gcc/testsuite/ChangeLog:
PR d/96924
* gdc.dg/simd13927b.d: Removed.
* gdc.dg/pr96924.d: New test.
This refines the previous fix for PR96698 by re-doing how and where
we arrange for setting vectorized cycle PHI backedge values.
2020-09-04 Richard Biener <rguenther@suse.de>
PR tree-optimization/96698
PR tree-optimization/96920
* tree-vectorizer.h (loop_vec_info::reduc_latch_defs): Remove.
(loop_vec_info::reduc_latch_slp_defs): Likewise.
* tree-vect-stmts.c (vect_transform_stmt): Remove vectorized
cycle PHI latch code.
* tree-vect-loop.c (maybe_set_vectorized_backedge_value): New
helper to set vectorized cycle PHI latch values.
(vect_transform_loop): Walk over all PHIs again after
vectorizing them, calling maybe_set_vectorized_backedge_value.
Call maybe_set_vectorized_backedge_value for each vectorized
stmt. Remove delayed update code.
* tree-vect-slp.c (vect_analyze_slp_instance): Initialize
SLP instance reduc_phis member.
(vect_schedule_slp): Set vectorized cycle PHI latch values.
* gfortran.dg/vect/pr96920.f90: New testcase.
* gcc.dg/vect/pr96920.c: Likewise.
gcc/ChangeLog
2020-09-04 Andrea Corallo <andrea.corallo@arm.com>
* tree-vect-loop.c (vect_estimate_min_profitable_iters): Remove
dead code as LOOP_VINFO_USING_PARTIAL_VECTORS_P (loop_vinfo) is
always verified.
The testcase shows that we fail to clear gimple_call_ctrl_altering_p
when the last abnormal edge goes away, causing an edge insert to
a loop header edge when we have preheaders to split the edge
unnecessarily.
The following addresses this by more aggressively clearing the
flag in cleanup_call_ctrl_altering_flag.
2020-09-04 Richard Biener <rguenther@suse.de>
PR tree-optimization/96931
* tree-cfgcleanup.c (cleanup_call_ctrl_altering_flag): If
there's a fallthru edge and no abnormal edge the call is
no longer control-altering.
(cleanup_control_flow_bb): Pass down the BB to
cleanup_call_ctrl_altering_flag.
* gcc.dg/pr96931.c: New testcase.
As discussed yesterday, stream_input_location_now has been used in 3
remaining places. For ERT_MUST_NOT_THROW, I believe the failure_loc
location is stable at least until the apply_cache after the bbs are all
read, and the locations do not include BLOCK, so we can use normal
stream_input_location, and the two input_struct_function_base also
shouldn't include BLOCK and are stable at least until that same apply_cache
after reading all bbs, so again we can use the location cache.
2020-09-04 Jakub Jelinek <jakub@redhat.com>
* lto-streamer.h (stream_input_location_now): Remove declaration.
* lto-streamer-in.c (stream_input_location_now): Remove.
(input_eh_region, input_struct_function_base): Use
stream_input_location instead of stream_input_location_now.
As discussed yesterday:
On the streamer out side, we call clear_line_info
in multiple spots which resets the current_* values to something, but on the
reader side, we don't have corresponding resets in the same location, just have
the stream_* static variables that keep the current values through the
entire stream in (so across all the clear_line_info spots in a single LTO
object but also across jumping from one LTO object to another one).
Now, in an earlier version of my patch it actually broke LTO bootstrap
(and a lot of LTO testcases), so for the BLOCK case I've solved it by
clear_line_info setting current_block to something that should never appear,
which means that in the LTO stream after the clear_line_info spots including
the start of the LTO stream we force the block change bit to be set and thus
BLOCK to be streamed and therefore stream_block from earlier to be
ignored. But for the rest I think that is not the case, so I wonder if we
don't sometimes end up with wrong line/column info because of that, or
please tell me what prevents that.
clear_line_info does:
ob->current_file = NULL;
ob->current_line = 0;
ob->current_col = 0;
ob->current_sysp = false;
while I think NULL current_file is something that should likely be different
from expanded_location (...).file (UNKNOWN_LOCATION/BUILTINS_LOCATION are
handled separately and not go through the caching), I think line number 0
can sometimes occur and especially column 0 occurs frequently if we ran out
of location_t with columns info. But then we do:
bp_pack_value (bp, ob->current_file != xloc.file, 1);
bp_pack_value (bp, ob->current_line != xloc.line, 1);
bp_pack_value (bp, ob->current_col != xloc.column, 1);
and stream the details only if the != is true. If that happens immediately
after clear_line_info and e.g. xloc.column is 0, we would stream 0 bit and
not stream the actual value, so on read-in it would reuse whatever
stream_col etc. were before. Shouldn't we set some ob->current_* new bit
that would signal we are immediately past clear_line_info which would force
all these != checks to non-zero? Either by oring something into those
tests, or perhaps:
if (ob->current_reset)
{
if (xloc.file == NULL)
ob->current_file = "";
if (xloc.line == 0)
ob->current_line = 1;
if (xloc.column == 0)
ob->current_column = 1;
ob->current_reset = false;
}
before doing those bp_pack_value calls with a comment, effectively forcing
all 6 != comparisons to be true?
2020-09-04 Jakub Jelinek <jakub@redhat.com>
* lto-streamer.h (struct output_block): Add reset_locus member.
* lto-streamer-out.c (clear_line_info): Set reset_locus to true.
(lto_output_location_1): If reset_locus, clear it and ensure
current_{file,line,col} is different from xloc members.
This patch updates the BPF back end to generate indirect calls via
the 'call %reg' instruction when targetting xBPF.
Additionally, the BPF ASM_SPEC is updated to pass along -mxbpf to
gas, where it is now supported.
2020-09-03 David Faust <david.faust@oracle.com>
gcc/
* config/bpf/bpf.h (ASM_SPEC): Pass -mxbpf to gas, if specified.
* config/bpf/bpf.c (bpf_output_call): Support indirect calls in xBPF.
gcc/testsuite/
* gcc.target/bpf/xbpf-indirect-call-1.c: New test.
This patch is to clean existing rs6000 test targets p8 and p9+
with existing has_arch_pwr8 and has_arch_pwr9 targets combination
or only one of them.
gcc/testsuite/ChangeLog:
* gcc.target/powerpc/pr92398.p9+.c: Replace p9+ with has_arch_pwr9.
* gcc.target/powerpc/pr92398.p9-.c: Replace p9+ with has_arch_pwr9,
and replace p8 with has_arch_pwr8 && !has_arch_pwr9.
* lib/target-supports.exp (check_effective_target_p8): Remove.
(check_effective_target_p9+): Remove.
The testcase causes and ICE in the SRA verifier on x86_64 when
compiling with -m32 because build_user_friendly_ref_for_offset looks
at an out-of-bounds array_ref within an array_ref which accesses an
offset which does not fit into a signed 32bit integer and turns it
into an array-ref with a negative index.
The best thing is probably to bail out early when encountering an out
of bounds access to a local stack-allocated aggregate (and let the DSE
just delete such statements) which is what the patch does.
I also glanced over to the initial candidate vetting routine to make
sure the size would fit into HWI and noticed that it uses unsigned
variants whereas the rest of SRA operates on signed offsets and
sizes (because get_ref_and_extent does) and so changed that for the
sake of consistency. These ancient checks operate on sizes of types
as opposed to DECLs but I hope that any issues potentially arising
from that are basically hypothetical.
gcc/ChangeLog:
2020-08-28 Martin Jambor <mjambor@suse.cz>
PR tree-optimization/96820
* tree-sra.c (create_access): Disqualify candidates with accesses
beyond the end of the original aggregate.
(maybe_add_sra_candidate): Check that candidate type size fits
signed uhwi for the sake of consistency.
gcc/testsuite/ChangeLog:
2020-08-28 Martin Jambor <mjambor@suse.cz>
PR tree-optimization/96820
* gcc.dg/tree-ssa/pr96820.c: New test.
Hi,
This corrects an issue with the powerpc vector long long subtypes.
As reported by SjMunroe, when building some code with -Wall, and
attempting to print an element of a "long long vector" with a
long long printf format string, we will report an error because
the vector sub-type was improperly defined as int.
When defining a V2DI_type_node we use a TARGET_POWERPC64 ternary to
define the V2DI_type_node with "vector long" or "vector long long".
We also need to specify the proper sub-type when we define the type.
PR target/96139
2020-09-03 Will Schmidt <will_schmidt@vnet.ibm.com>
gcc/ChangeLog:
* config/rs6000/rs6000-call.c (rs6000_init_builtin): Update V2DI_type_node
and unsigned_V2DI_type_node definitions.
gcc/testsuite/ChangeLog:
* gcc.target/powerpc/pr96139-a.c: New test.
* gcc.target/powerpc/pr96139-b.c: New test.
* gcc.target/powerpc/pr96139-c.c: New test.
The recent libstdc++ changes caused lots of libstdc++-v3 tests FAILs
on i686-linux, all of them in the same spot during constexpr evaluation
of a recursive _S_gcd call.
The problem is yet another hash_map that used the default hasing of
tree keys through pointer hashing which is preserved across PCH write/read.
During PCH handling, the addresses of GC objects are changed, which means
that the hash values of the keys in such hash tables change without those
hash tables being rehashed. Which in the fundef_copies_table case usually
means we just don't find a copy of a FUNCTION_DECL body for recursive uses
and start from scratch. But when the hash table keeps growing, the "dead"
elements in the hash table can sometimes reappear and break things.
In particular what I saw under the debugger is when the fundef_copies_table
hash map has been used on the outer _S_gcd call, it didn't find an entry for
it, so returned a slot with *slot == NULL, which is treated as that the
function itself is used directly (i.e. no recursion), but that addition of
a hash table slot caused the recursive _S_gcd call to actually find
something in the hash table, unfortunately not the new *slot == NULL spot,
but a different one from the pre-PCH streaming which contained the returned
toplevel (non-recursive) call entry for it, which means that for the
recursive _S_gcd call we actually used the same trees as for the outer ones
rather than a copy of those, which breaks constexpr evaluation.
2020-09-03 Jakub Jelinek <jakub@redhat.com>
PR c++/96901
* tree.h (struct decl_tree_traits): New type.
(decl_tree_map): New typedef.
* constexpr.c (fundef_copies_table): Change type from
hash_map<tree, tree> * to decl_tree_map *.
The IALL intrinsic would always return 0 when the DIM and MASK arguments
were present since the initial value of repeated BIT-AND operations was
set to 0 instead of -1.
libgfortran/ChangeLog:
* m4/iall.m4: Initial value for result should be -1.
* generated/iall_i1.c (miall_i1): Generated.
* generated/iall_i16.c (miall_i16): Likewise.
* generated/iall_i2.c (miall_i2): Likewise.
* generated/iall_i4.c (miall_i4): Likewise.
* generated/iall_i8.c (miall_i8): Likewise.
gcc/testsuite/ChangeLog:
* gfortran.dg/iall_masked.f90: New test.
This patch nails down the remaining P0960 case in PR92812:
struct A {
int ar[2];
A(): ar(1, 2) {} // doesn't work without this patch
};
Note that when the target object is not of array type, this already
works:
struct S { int x, y; };
struct A {
S s;
A(): s(1, 2) { } // OK in C++20
};
because build_new_method_call_1 takes care of the P0960 magic.
It proved to be quite hairy. When the ()-list has more than one
element, we can always create a CONSTRUCTOR, because the code was
previously invalid. But when the ()-list has just one element, it
gets all kinds of difficult. As usual, we have to handle a("foo")
so as not to wrap the STRING_CST in a CONSTRUCTOR. Always turning
x(e) into x{e} would run into trouble as in c++/93790. Another
issue was what to do about x({e}): previously, this would trigger
"list-initializer for non-class type must not be parenthesized".
I figured I'd make this work in C++20, so that given
struct S { int x, y; };
you can do
S a[2];
[...]
A(): a({1, 2}) // initialize a[0] with {1, 2} and a[1] with {}
It also turned out that, as an extension, we support compound literals:
F (): m((S[1]) { 1, 2 })
so this has to keep working as before. Moreover, make sure not to trigger
in compiler-generated code, like =default, where array assignment is allowed.
I've factored out a function that turns a TREE_LIST into a CONSTRUCTOR
to simplify handling of P0960.
paren-init35.C also tests this with vector types.
gcc/cp/ChangeLog:
PR c++/92812
* cp-tree.h (do_aggregate_paren_init): Declare.
* decl.c (do_aggregate_paren_init): New.
(grok_reference_init): Use it.
(check_initializer): Likewise.
* init.c (perform_member_init): Handle initializing an array from
a ()-list. Use do_aggregate_paren_init.
gcc/testsuite/ChangeLog:
PR c++/92812
* g++.dg/cpp0x/constexpr-array23.C: Adjust dg-error.
* g++.dg/cpp0x/initlist69.C: Likewise.
* g++.dg/diagnostic/mem-init1.C: Likewise.
* g++.dg/init/array28.C: Likewise.
* g++.dg/cpp2a/paren-init33.C: New test.
* g++.dg/cpp2a/paren-init34.C: New test.
* g++.dg/cpp2a/paren-init35.C: New test.
* g++.old-deja/g++.brendan/crash60.C: Adjust dg-error.
* g++.old-deja/g++.law/init10.C: Likewise.
* g++.old-deja/g++.other/array3.C: Likewise.
As discussed in the PR, fold-const.c punts on floating point constant
evaluation if the result is inexact and -frounding-math is turned on.
/* Don't constant fold this floating point operation if the
result may dependent upon the run-time rounding mode and
flag_rounding_math is set, or if GCC's software emulation
is unable to accurately represent the result. */
if ((flag_rounding_math
|| (MODE_COMPOSITE_P (mode) && !flag_unsafe_math_optimizations))
&& (inexact || !real_identical (&result, &value)))
return NULL_TREE;
Jonathan said that we should be evaluating them anyway, e.g. conceptually
as if they are done with the default rounding mode before user had a chance
to change that, and e.g. in C in initializers it is also ignored.
In fact, fold-const.c for C initializers turns off various other options:
/* Perform constant folding and related simplification of initializer
expression EXPR. These behave identically to "fold_buildN" but ignore
potential run-time traps and exceptions that fold must preserve. */
int saved_signaling_nans = flag_signaling_nans;\
int saved_trapping_math = flag_trapping_math;\
int saved_rounding_math = flag_rounding_math;\
int saved_trapv = flag_trapv;\
int saved_folding_initializer = folding_initializer;\
flag_signaling_nans = 0;\
flag_trapping_math = 0;\
flag_rounding_math = 0;\
flag_trapv = 0;\
folding_initializer = 1;
flag_signaling_nans = saved_signaling_nans;\
flag_trapping_math = saved_trapping_math;\
flag_rounding_math = saved_rounding_math;\
flag_trapv = saved_trapv;\
folding_initializer = saved_folding_initializer;
So, shall cxx_eval_outermost_constant_expr instead turn off all those
options (then warning_sentinel wouldn't be the right thing to use, but given
the 8 or how many return stmts in cxx_eval_outermost_constant_expr, we'd
need a RAII class for this. Not sure about the folding_initializer, that
one is affecting complex multiplication and division constant evaluation
somehow.
2020-09-03 Jakub Jelinek <jakub@redhat.com>
PR c++/96862
* constexpr.c (cxx_eval_outermost_constant_expr): Temporarily disable
flag_rounding_math during manifestly constant evaluation.
* g++.dg/cpp1z/constexpr-96862.C: New test.
This "fix" makes no sense, but it avoids an error from G++ about
std::is_constructible being incomplete. The real problem is elsewhere,
but this "fixes" the regression for now.
libstdc++-v3/ChangeLog:
PR libstdc++/96592
* include/std/tuple (_TupleConstraints<true, T...>): Use
alternative is_constructible instead of std::is_constructible.
* testsuite/20_util/tuple/cons/96592.cc: New test.
The current std::gcd and std::chrono::duration::_S_gcd algorithms are
both recursive. This is potentially expensive to evaluate in constant
expressions, because each level of recursion makes a new copy of the
function to evaluate. The maximum number of steps is bounded
(proportional to the number of decimal digits in the smaller value) and
so unlikely to exceed the limit for constexpr nesting, but the memory
usage is still suboptimal. By using an iterative algorithm we avoid
that compile-time cost. Because looping in constexpr functions is not
allowed until C++14, we need to keep the recursive implementation in
duration::_S_gcd for C++11 mode.
For std::gcd we can also optimise runtime performance by using the
binary GCD algorithm.
libstdc++-v3/ChangeLog:
* include/std/chrono (duration::_S_gcd): Use iterative algorithm
for C++14 and later.
* include/std/numeric (__detail::__gcd): Replace recursive
Euclidean algorithm with iterative version of binary GCD algorithm.
* testsuite/26_numerics/gcd/1.cc: Test additional inputs.
* testsuite/26_numerics/gcd/gcd_neg.cc: Adjust dg-error lines.
* testsuite/26_numerics/lcm/lcm_neg.cc: Likewise.
* testsuite/experimental/numeric/gcd.cc: Test additional inputs.
* testsuite/26_numerics/gcd/2.cc: New test.
As mentioned in the PR, when compiling valgrind even on fairly small
testcase where in one larger function the location keeps oscillating
between a small line number and 8000-ish line number in the same file
we very quickly run out of all possible location_t numbers and because of
that emit non-sensical line numbers in .debug_line.
There are ways how to decrease speed of depleting location_t numbers
in libcpp, but the main reason of this is that we use
stream_input_location_now for streaming in location_t for gimple_location
and phi arg locations. libcpp strongly prefers that the locations
it is given are sorted by the different files and by line numbers in
ascending order, otherwise it depletes quickly no matter what and is much
more costly (many extra file changes etc.).
The reason for not caching those were the BLOCKs that were streamed
immediately after the location and encoded into the locations (and for PHIs
we failed to stream the BLOCKs altogether).
This patch enhances the location cache to handle also BLOCKs (but not for
everything, only for the spots we care about the BLOCKs) and also optimizes
the size of the LTO stream by emitting a single bit into a pack whether the
BLOCK changed from last case and only streaming the BLOCK tree if it
changed.
2020-09-03 Jakub Jelinek <jakub@redhat.com>
PR lto/94311
* gimple.h (gimple_location_ptr, gimple_phi_arg_location_ptr): New
functions.
* streamer-hooks.h (struct streamer_hooks): Add
output_location_and_block callback. Fix up formatting for
output_location.
(stream_output_location_and_block): Define.
* lto-streamer.h (class lto_location_cache): Fix comment typo. Add
current_block member.
(lto_location_cache::input_location_and_block): New method.
(lto_location_cache::lto_location_cache): Initialize current_block.
(lto_location_cache::cached_location): Add block member.
(struct output_block): Add current_block member.
(lto_output_location): Formatting fix.
(lto_output_location_and_block): Declare.
* lto-streamer.c (lto_streamer_hooks_init): Initialize
streamer_hooks.output_location_and_block.
* lto-streamer-in.c (lto_location_cache::cmp_loc): Also compare
block members.
(lto_location_cache::apply_location_cache): Handle blocks.
(lto_location_cache::accept_location_cache,
lto_location_cache::revert_location_cache): Fix up function comments.
(lto_location_cache::input_location_and_block): New method.
(lto_location_cache::input_location): Implement using
input_location_and_block.
(input_function): Invoke apply_location_cache after streaming in all
bbs.
* lto-streamer-out.c (clear_line_info): Set current_block.
(lto_output_location_1): New function, moved from lto_output_location,
added block handling.
(lto_output_location): Implement using lto_output_location_1.
(lto_output_location_and_block): New function.
* gimple-streamer-in.c (input_phi): Use input_location_and_block
to input and cache both location and block.
(input_gimple_stmt): Likewise.
* gimple-streamer-out.c (output_phi): Use
stream_output_location_and_block.
(output_gimple_stmt): Likewise.
This improves the situation somewhat when vector lowering tries
to access vector bools as seen in PR96814.
2020-09-03 Richard Biener <rguenther@suse.de>
* tree-vect-generic.c (tree_vec_extract): Remove odd
special-casing of boolean vectors.
* fold-const.c (fold_ternary_loc): Handle boolean vector
type BIT_FIELD_REFs.
When seeing if any bound involved in a type is an uplevel reference,
we must look at the fullest view of a type, since that's what the
backends will do. Similarly for private types. We introduce
Get_Fullest_View for that purpose.
* sem_util.ads, sem_util.adb (Get_Fullest_View): New procedure.
* exp_unst.adb (Check Static_Type): Do all processing on fullest
view of specified type.
For constant vector having one duplicated value, there's no need to put
whole vector in the constant pool, using embedded broadcast instead.
2020-07-09 Hongtao Liu <hongtao.liu@intel.com>
gcc/ChangeLog:
PR target/87767
* config/i386/i386-features.c
(replace_constant_pool_with_broadcast): New function.
(constant_pool_broadcast): Ditto.
(class pass_constant_pool_broadcast): New pass.
(make_pass_constant_pool_broadcast): Ditto.
(remove_partial_avx_dependency): Call
replace_constant_pool_with_broadcast under TARGET_AVX512F, it
would save compile time when both pass rpad and cpb are
available.
(remove_partial_avx_dependency_gate): New function.
(class pass_remove_partial_avx_dependency::gate): Call
remove_partial_avx_dependency_gate.
* config/i386/i386-passes.def: Insert new pass after combine.
* config/i386/i386-protos.h
(make_pass_constant_pool_broadcast): Declare.
* config/i386/sse.md (*avx512dq_mul<mode>3<mask_name>_bcst):
New define_insn.
(*avx512f_mul<mode>3<mask_name>_bcst): Ditto.
* config/i386/avx512fintrin.h (_mm512_set1_ps,
_mm512_set1_pd,_mm512_set1_epi32, _mm512_set1_epi64): Adjusted.
gcc/testsuite/ChangeLog:
PR target/87767
* gcc.target/i386/avx2-broadcast-pr87767-1.c: New test.
* gcc.target/i386/avx512f-broadcast-pr87767-1.c: New test.
* gcc.target/i386/avx512f-broadcast-pr87767-2.c: New test.
* gcc.target/i386/avx512f-broadcast-pr87767-3.c: New test.
* gcc.target/i386/avx512f-broadcast-pr87767-4.c: New test.
* gcc.target/i386/avx512f-broadcast-pr87767-5.c: New test.
* gcc.target/i386/avx512f-broadcast-pr87767-6.c: New test.
* gcc.target/i386/avx512f-broadcast-pr87767-7.c: New test.
* gcc.target/i386/avx512vl-broadcast-pr87767-1.c: New test.
* gcc.target/i386/avx512vl-broadcast-pr87767-1.c: New test.
* gcc.target/i386/avx512vl-broadcast-pr87767-2.c: New test.
* gcc.target/i386/avx512vl-broadcast-pr87767-3.c: New test.
* gcc.target/i386/avx512vl-broadcast-pr87767-4.c: New test.
* gcc.target/i386/avx512vl-broadcast-pr87767-5.c: New test.
* gcc.target/i386/avx512vl-broadcast-pr87767-6.c: New test.
gcc/testsuite/ChangeLog:
PR target/96246
PR target/96855
PR target/96856
PR target/96857
* g++.target/i386/avx512bw-pr96246-2.C: Add runtime check for
AVX512BW.
* g++.target/i386/avx512vl-pr96246-2.C: Add runtime check for
AVX512BW and AVX512VL
* g++.target/i386/avx512f-helper.h: New header.
* gcc.target/i386/pr92658-avx512f.c: Add
-mprefer-vector-width=512 to avoid impact of different default
mtune which gcc is built with.
* gcc.target/i386/avx512bw-pr95488-1.c: Ditto.
* gcc.target/i386/pr92645-4.c: Add -mno-avx512f to avoid
impact of different default march which gcc is built with.
gcc/d/ChangeLog:
PR d/96869
* d-builtins.cc (build_frontend_type): Don't expose intrinsics that
use unsupported vector types.
* d-target.cc (Target::isVectorTypeSupported): Restrict to supporting
only if TARGET_VECTOR_MODE_SUPPORTED_P is true. Don't allow complex
or boolean vector types.
gcc/testsuite/ChangeLog:
PR d/96869
* gdc.dg/simd.d: Removed.
* gdc.dg/cast1.d: New test.
* gdc.dg/gdc213.d: Compile with target vect_sizes_16B_8B.
* gdc.dg/gdc284.d: Likewise.
* gdc.dg/gdc67.d: Likewise.
* gdc.dg/pr96869.d: New test.
* gdc.dg/simd1.d: New test.
* gdc.dg/simd10447.d: New test.
* gdc.dg/simd12776.d: New test.
* gdc.dg/simd13841.d: New test.
* gdc.dg/simd13927.d: New test.
* gdc.dg/simd15123.d: New test.
* gdc.dg/simd15144.d: New test.
* gdc.dg/simd16087.d: New test.
* gdc.dg/simd16697.d: New test.
* gdc.dg/simd17237.d: New test.
* gdc.dg/simd17695.d: New test.
* gdc.dg/simd17720a.d: New test.
* gdc.dg/simd17720b.d: New test.
* gdc.dg/simd19224.d: New test.
* gdc.dg/simd19627.d: New test.
* gdc.dg/simd19628.d: New test.
* gdc.dg/simd19629.d: New test.
* gdc.dg/simd19630.d: New test.
* gdc.dg/simd2a.d: New test.
* gdc.dg/simd2b.d: New test.
* gdc.dg/simd2c.d: New test.
* gdc.dg/simd2d.d: New test.
* gdc.dg/simd2e.d: New test.
* gdc.dg/simd2f.d: New test.
* gdc.dg/simd2g.d: New test.
* gdc.dg/simd2h.d: New test.
* gdc.dg/simd2i.d: New test.
* gdc.dg/simd2j.d: New test.
* gdc.dg/simd7951.d: New test.
* gdc.dg/torture/array2.d: New test.
* gdc.dg/torture/array3.d: New test.
* gdc.dg/torture/simd16488a.d: New test.
* gdc.dg/torture/simd16488b.d: New test.
* gdc.dg/torture/simd16703.d: New test.
* gdc.dg/torture/simd19223.d: New test.
* gdc.dg/torture/simd19607.d: New test.
* gdc.dg/torture/simd3.d: New test.
* gdc.dg/torture/simd4.d: New test.
* gdc.dg/torture/simd7411.d: New test.
* gdc.dg/torture/simd7413a.d: New test.
* gdc.dg/torture/simd7413b.d: New test.
* gdc.dg/torture/simd7414.d: New test.
* gdc.dg/torture/simd9200.d: New test.
* gdc.dg/torture/simd9304.d: New test.
* gdc.dg/torture/simd9449.d: New test.
* gdc.dg/torture/simd9910.d: New test.
Unless the test explicitly requests, all compilable tests as well as
fail_compilation tests will be ran without any extra flags.
The C++ tests now are checked against shared D runtime library.
gcc/testsuite/ChangeLog:
* lib/gdc-utils.exp (gdc-convert-test): Handle LINK directive.
Set PERMUTE_ARGS as DEFAULT_DFLAGS only for runnable tests.
(gdc-do-test): Set default action of compilable tests to compile.
Test SHARED_OPTION on runnable_cxx tests.
Since r216679 these macros have only been defined in C++98 mode, rather
than all modes. That is permitted as a GNU extension because that header
doesn't exist in the C++ standard until C++11, so we can make it do
whatever we want for C++98. But as discussed in the PR c++/60304
comments, these macros shouldn't ever be defined for C++.
This patch removes the macro definitions for C++98 too.
The new test already passed for C++98 (and the conversion is ill-formed
in C++11 and later) so this new test is arguably unnecessary.
gcc/ChangeLog:
PR c++/60304
* ginclude/stdbool.h (bool, false, true): Never define for C++.
gcc/testsuite/ChangeLog:
PR c++/60304
* g++.dg/warn/Wconversion-null-5.C: New test.
This test no longer compiles because <new> stopped including
<exception>, so std::set_terminate is not defined.
gcc/testsuite/ChangeLog:
* g++.old-deja/g++.abi/cxa_vec.C: Include <exception> for
std::set_terminate.
This was copied from a test for std::lcm but I forgot to change one of
the calls to use the experimental version of the function.
libstdc++-v3/ChangeLog:
PR libstdc++/92978
* testsuite/experimental/numeric/92978.cc: Use experimental::lcm
not std::lcm.
The spaceship operator for std::array uses memcmp when the
__is_byte<value_type> trait is true, but memcmp isn't usable in
constexpr contexts. Also, memcmp should only be used for unsigned byte
types, because it gives the wrong answer for signed chars with negative
values.
We can simply check std::is_constant_evaluated() so that we don't use
memcmp during constant evaluation.
To fix the problem of using memcmp for inappropriate types, this patch
adds new __is_memcmp_ordered and __is_memcmp_ordered_with traits. These
say whether using memcmp will give the right answer for ordering
operations such as lexicographical_compare and three-way comparisons.
The new traits can be used in several places, and can also be used to
implement my suggestion in PR 93059 comment 37 to use memcmp for
unsigned integers larger than one byte on big endian targets.
libstdc++-v3/ChangeLog:
PR libstdc++/96851
* include/bits/cpp_type_traits.h (__is_memcmp_ordered):
New trait that says if memcmp can be used for ordering.
(__is_memcmp_ordered_with): Likewise, for two types.
* include/bits/deque.tcc (__lex_cmp_dit): Use new traits
instead of __is_byte and __numeric_traits.
(__lexicographical_compare_aux1): Likewise.
* include/bits/ranges_algo.h (__lexicographical_compare_fn):
Likewise.
* include/bits/stl_algobase.h (__lexicographical_compare_aux1)
(__is_byte_iter): Likewise.
* include/std/array (operator<=>): Likewise. Only use memcmp
when std::is_constant_evaluated() is false.
* testsuite/23_containers/array/comparison_operators/96851.cc:
New test.
* testsuite/23_containers/array/tuple_interface/get_neg.cc:
Adjust dg-error line numbers.
In the MSP430 small memory model, there is a 16-bit address space and
pointer arithmetic wraps around the address space, so any calculated
address is always within this range.
In this test, pointer arithmetic wraps when 0x1000 is added to the
address of a variable, causing the resulting address to be unexpectedly
less than 0x2000, which breaks the test.
gcc/testsuite/ChangeLog:
* gcc.dg/pr55940.c: Skip for msp430 unless -mlarge is specified.
The <new> and <exception> headers each include each other, which makes
building them as header-units "exciting". The <new> header only needs
the definition of std::exception (in order to derive from it) which is
already in its own header, so just include that.
libstdc++-v3/ChangeLog:
* include/bits/stl_iterator.h: Include <bits/exception_defines.h>
for definitions of __try, __catch and __throw_exception_again.
(counted_iterator::operator++(int)): Use __throw_exception_again
instead of throw.
* libsupc++/new: Include <bits/exception.h> not <exception>.
* libsupc++/new_opvnt.cc: Include <bits/exception_defines.h>.
* testsuite/18_support/destroying_delete.cc: Include
<type_traits> for std::is_same_v definition.
* testsuite/20_util/variant/index_type.cc: Qualify size_t.
