PR libfortran/57496
* io/write_float.def: Use built-in type-generic functions defined
by libgfortran.h for isfinite, isnan, and signbit.
From-SVN: r227136
2015-07-14 Janne Blomqvist <jb@gcc.gnu.org>
PR libfortran/66861
* io/unix.c (compare_file_filename): Verify that u->filename is
non-NULL before strcmp.
(find_file0): Likewise.
From-SVN: r225788
2015-04-21 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/65234
* io/format.c (parse_format_list): Set the seen_dd flag in all
cases where a data descriptor has been seen.
From-SVN: r222274
2015-04-21 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/56743
* io/list_read.c (CASE_SEPARATORS): Add case for '!'.
(is_separator): Add condition for '!'.
(eat_separator): Use notify_std to warn or errord if '!' is
encountered before a proper separator.
From-SVN: r222271
2015-04-14 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/65089
* io/format.h (free_format): New function to free memory
allocated for building format error messages.
* io/format.c (format_error): Add checks before freeing memory
to avoid potential segfaults and free formatting data when
needed on error conditions. Always allocate and NULL terminate
the string.
* io/transfer.c (st_read_done, st_write_done): Use new
free_format function to clean up memory allocations when done.
From-SVN: r222111
2015-03-28 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/65596
* io/transfer.c (data_transfer_init): If in namelist mode and
delimiter is not specified, set it to DELIM_QUOTE, independent
of -std.
* io/unit.c (init_units): Set flags.delim to the correct
initial value of DELIM_UNSPECIFIED.
From-SVN: r221753
2015-03-22 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/59513
* io/transfer.c (data_transfer_init): Do not error for
-std=legacy.
From-SVN: r221572
2015-02-10 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/57822
* io/write_float.def (output_float): Apply fix of previous patch
to correctly calculate the exponent number of digits and take
care of wide character output.
From-SVN: r220606
2015-02-09 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/57822
* io/write_float.def (output_float): If doing g0 editing and
exponent is zero, do not emit exponent.
From-SVN: r220564
2015-02-07 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/60956
* io/fbuf.c (fbuf_flush_list): New function that only flushes
if current fbuf position exceeds a limit.
* io/fbuf.h: Declare the new function.
* io/io.h (enum unit_mode): Add two new modes.
* io/list_read.c (list_formatted_read_scalar): Call new function.
* io/write.c: Include fbuf.h. (list_formatted_write_scalar):
Call new function.
From-SVN: r220505
2015-01-22 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/61933
* io/inquire.c (inquire_via_unit): Set existing to true for
any negative unit that is currently connected and any positive
units within range of KIND=4 value. The unit value for any out
of range case that may occur if the user is using a KIND=8 will
have been set to -2 which is reserved and can never be opened,
and therefore the unit does not exist.
From-SVN: r220024
2015-01-14 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/61933
* io/inquire.c (inquire_via_unit): Set existing to true if a
gfc_unit stucture was found for the given unit number.
* runtime/error.c (translate_error): Add case for
LIBERROR_INQUIRE_INTERNAL_UNIT.
From-SVN: r219631
2014-11-13 Janne Blomqvist <jb@gcc.gnu.org>
PR libfortran/60324
* configure: Regenerated.
* configure.ac (AM_CFLAGS): Add Werror=vla.
* libgfortran.h (gfc_alloca): Remove macro.
(fc_strdup_notrim): New prototype.
* intrinsics/access.c (access_func): Use fc_strdup rather than
stack allocation.
* intrinsics/chdir.c (chdir_i4_sub): Likewise.
(chdir_i8_sub): Likewise.
* intrinsics/chmod.c (chmod_internal): New function, move logic
here.
(chmod_func): Call chmod_internal.
* intrinsics/env.c (getenv): Use fc_strdup rather than stack
allocation.
(get_environment_variable_i4): Likewise.
* intrinsics/execute_command_line.c (execute_command_line):
Likewise.
* intrinsics/hostnm.c (hostnm_0): New function, use static buffer
rather than VLA.
(hostnm_i4_sub): Call hostnm_0.
(hostnm_i8_sub): Likewise.
(hostnm): Likewise.
* intrinsics/link.c (link_internal): New function, use fc_strdup
rather than stack allocation.
(link_i4_sub): Call link_internal.
(link_i8_sub): Likewise.
(link_i4): Likewise.
(link_i8): Likewise.
* intrinsics/perror.c (perror_sub): Use fc_strdup rather than
stack allocation.
* intrinsics/random.c (random_seed_i4): Use static buffer rather
than VLA, use _Static_assert to make sure it's big enough.
* intrinsics/rename.c (rename_internal): New function, use
fc_strdup rather than stack allocation.
(rename_i4_sub): Call rename_internal.
(rename_i8_sub): Likewise.
(rename_i4): Likewise.
(rename_i8): Likewise.
* intrinsics/stat.c (stat_i4_sub_0): Use fc_strdup rather than
stack allocation.
(stat_i8_sub_0): Likewise.
* intrinsics/symlink.c (symlnk_internal): New function, use
fc_strdup rather than stack allocation.
(symlnk_i4_sub): Call symlnk_internal.
(symlnk_i8_sub): Likewise.
(symlnk_i4): Likewise.
(symlnk_i8): Likewise.
* intrinsics/system.c (system_sub): Use fc_strdup rather than
stack allocation.
* intrinsics/unlink.c (unlink_i4_sub): Likewise.
* io/file_pos.c (READ_CHUNK): Make it a macro rather than variable.
* io/list_read.c (nml_get_obj_data): Use fixed stack buffer, fall
back to xmalloc/free for large sizes.
* io/read.c (read_f): Likewise.
* io/transfer.c (MAX_READ): Make it a macro rather than variable.
(WRITE_CHUNK): Likewise.
* io/write_float.def (write_float): Use fixed stack buffer, fall
back to xmalloc/free for large sizes.
* runtime/string.c (fc_strdup_notrim): New function.
From-SVN: r217480
2014-11-10 Janne Blomqvist <jb@gcc.gnu.org>
PR libfortran/47007
PR libfortran/61847
* config.h.in: Regenerated.
* configure: Regenerated.
* configure.ac (AC_CHECK_HEADERS_ONCE): Check for xlocale.h.
(AC_CHECK_FUNCS_ONCE): Check for newlocale, freelocale, uselocale,
strerror_l.
* io/io.h (locale.h): Include.
(xlocale.h): Include if present.
(c_locale): New variable.
(old_locale): New variable.
(old_locale_ctr): New variable.
(old_locale_lock): New variable.
(st_parameter_dt): Add old_locale member.
* io/transfer.c (data_transfer_init): Set locale to "C" if doing
formatted transfer.
(finalize_transfer): Reset locale to previous.
* io/unit.c (c_locale): New variable.
(old_locale): New variable.
(old_locale_ctr): New variable.
(old_locale_lock): New variable.
(init_units): Init c_locale, init old_locale_lock.
(close_units): Free c_locale.
* runtime/error.c (locale.h): Include.
(xlocale.h): Include if present.
(gf_strerror): Use strerror_l if available. Reset locale to
LC_GLOBAL_LOCALE for strerror_r branch.
2014-11-10 Janne Blomqvist <jb@gcc.gnu.org>
PR libfortran/47007
PR libfortran/61847
* gfortran.texi: Add note about locale issues to thread-safety
section.
From-SVN: r217273
2014-10-05 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/63460
* io/unit.c (init_units): Initialize the DELIM flag to
UNSPECIFIED for the STDIN unit so that the flag is
correctly set later.
From-SVN: r215908
2014-09-18 Janne Blomqvist <jb@gcc.gnu.org>
PR libfortran/62768
* io/inquire.c (inquire_via_unit): Use gfc_unit.filename also when
HAVE_TTYNAME{_R} is not defined.
From-SVN: r215338
2014-09-10 Janne Blomqvist <jb@gcc.gnu.org>
* io/transfer.c (read_block_form): Fix pad status check (found by
Thomas Schwinge with -Wlogical-not-parentheses).
From-SVN: r215092
2014-07-20 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/61632
* io/format.c (format_error): Avoid invalid string pointer by
using the fortran string length values to generate error string.
(parse_format): Allocate the null terminator for the format
string.
From-SVN: r212875
2014-06-28 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/61640
* io/list_read.c (next_char_internal): Adjust the read length to
a single wide character. (eat_spaces): Add missing paren.
* io/unix.c (mem_read4): Use the correct mem_alloc function for
wide character internal reads.
From-SVN: r212118
2014-06-26 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/61499
* io/list_read.c (eat_spaces): Use a 'for' loop instead of
'while' loop to skip the loop if there are no bytes left in the
string. Only seek if actual spaces can be skipped.
From-SVN: r212059
2014-05-26 Tobias Burnus <burnus@net-b.de>
PR fortran/55117
* trans-io.c (nml_full_name, transfer_namelist_element): Insert
a '+' rather then '%' to differentiate namelist variable names
that are based on extended derived types.
2014-05-26 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/55117
* io/list_read.c (extended_look_ahead): New helper function to
scan the namelist name and look for matches with the new '+'
extended type parent indicator. (str_comp_extended): New
helper function to compare the namelist name with the varname
namelist. (find_nml_name): Use the new helper functions to match
the extended type varnames.
From-SVN: r210934
2014-05-23 Jerry DeLisle <jvdelisle@gcc.gnu>
PR libfortran/61173
* io/list_read.c (eat_spaces): If the next character pointed to
is a space, don't seek, must be at the end.
From-SVN: r210898
2014-05-17 Jerry DeLisle <jvdelisle@gcc.gnu>
PR libfortran/52539
* io/io.h (gfc_unit): New function pointers *next_char_fn_ptr
and *push_char_fn_ptr.
*io/list_read.c (next_char): Create macro with this name to call
the new function pointer. Split the original next_char function
into three new functions. (next_char_default, next_char_internal,
next_char_utf8): New functions. (push_char): Create macro with
this name to call new function pointer. Split the original
push_char into three new functions. (push_char_default,
push_char_internal, push_char4): New functions. (set_workers):
New function to initilize the function pointers depending on the
type of IO to be performed. (list_formatted_read_scalar): Use
set_workers function. (finish_list_read): Likewise.
(namelist_read): Likewise.
(nml_get_obj_data): Use push_char_default.
From-SVN: r210574
2014-05-16 Janne Blomqvist <jb@gcc.gnu.org>
PR libfortran/61187
* io/unix.c (raw_close): Check if s->fd is -1.
(fd_to_stream): Check return value of fstat(), handle error.
From-SVN: r210527
2014-04-26 Jerry DeLisle <jvdelisle@gcc.gnu>
PR libfortran/52539
* io/list_read.c: Add uchar typedef. (push_char4): New function
to save kind=4 character. (next_char_utf8): New function to read
a single UTF-8 encoded character value. (read_chracter): Update
to use the new functions for reading UTF-8 strings.
(list_formatted_read_scalar): Update to handle list directed
reads of UTF-8 strings. (nml_read_obj): Likewise update for
UTF-8 strings in namelists.
* io/write.c (nml_write_obj): Add kind=4 character support for
namelist writes.
From-SVN: r209828
2014-03-21 Jerry DeLisle <jvdelisle@gcc.gnu>
PR libfortran/60148
* io/transfer.c (data_transfer_init): If std= was specified, set
delim status to DELIM_NONE of no other was specified.
From-SVN: r208759
2014-03-17 Jerry DeLisle <jvdelisle@gcc.gnu>
PR libfortran/46800
* io/list_read.c (list_formatted_read_scalar): Do not use
eat_separator. Explicitly set the comma and end-of-line flags.
Check for END condition from finish_separator.
From-SVN: r208629
2014-03-15 Jerry DeLisle <jvdelisle@gcc.gnu>
PR libfortran/58324
* io/list_read.c (finish_list_read): Read one character to check
for the end of the file. If it is the end, then issue the file
end error message. If not, use eat_line to reach the end
without giving error. The next attempt to read will then
issue the error as described above.
From-SVN: r208591
2014-03-12 Jerry DeLisle <jvdelisle@gcc.gnu>
PR libfortran/38199
* io/read.c (read_decimal): Quickly skip spaces to avoid calls
to next_char.
* io/unit.c (is_trim_ok): New helper function to check various
conditions to see if its OK to trim the internal unit string.
(get_internal_unit): Use LEN_TRIM to shorten selected internal
unit strings for optimizing READ. Enable this optimization for
formatted READ.
* io/list_read.c (finish_list_read): Don't call eat_line for
internal units.
From-SVN: r208528
2014-03-08 Jerry DeLisle <jvdelisle@gcc.gnu>
PR libfortran/38199
* io/list_read.c (next_char): Delete unuseful error checks.
(eat_spaces): For character array reading, skip ahead over
spaces rather than call next_char multiple times.
From-SVN: r208438
2014-03-08 Dominique d'Humieres <dominiq@lps.ens.fr>
PR libgfortran/60128
* io/write_float.def (output_float): Remove unused variable
nzero_real. Replace a double space with a single one.
(determine_en_precision): Fix wrong handling of the EN format.
PR libfortran/60128
* gfortran.dg/fmt_en.f90: New test.
From-SVN: r208423
2014-03-03 Jerry DeLisle <jvdelisle@gcc.gnu>
PR libfortran/60148
* io/inquire.c (inquire_via_unit): In the case of
DELIM_UNSPECIFIED set inquire return string to "NONE".
* io/list_read.c (read_character): In the case of DELIM_NONE and
namelists, complete the character read using the namelist
variable length.
* io/open.c (new_unit): Don't set delim status to none if not
specified so that DELIM_UNSPECIFIED can be used later.
* io/transfer.c (data_transfer_init): For namelist I/O, if the
unit delim status is unspecified set the current status to quote.
Otherwise, set current status to the unit status.
* io/unit.c (get_internel_unit, init_unit): Remember to set
flags_delim initially to DELIM_UNSPECIFIED so defaults come out
correctly.
* io/write.c (write_character): Add a new function argument
"mode" to signify that raw output is to be used vs output with
delimiters. If the mode is set to DELIM (1) proceed with
delimiters. (list_formatted_write_scalar): Write the separator
only if a delimiter was previously specified. Update the call to
write_character with the mode argument given.
(namelist_write_newline): Use the mode argument. (nml_write_obj):
Use the mode argument. Remove use of tmp_delim. Write the
semi-colon or comma correctly only when needed with using
delimiters. Cleanup whitespace.
(namelist_write): If delim is not specified in namelist I/O,
default to using quotes. Get rid of the tmp_delim variable and
use the new mode argument in write_character.
From-SVN: r208302
2014-02-21 Tobias Burnus <burnus@net-b.de>
PR fortran/60286
* libgfortran/io/inquire.c (yes, no): New static const char
* vars.
(inquire_via_unit): Use them. Use OPEN mode instead of using
POSIX's access to query about write=, read= and readwrite=.
2014-02-21 Tobias Burnus <burnus@net-b.de>
PR fortran/60286
* gfortran.dg/inquire_16.f90: New.
From-SVN: r207979
