2018-10-29 Joseph Myers <joseph@codesourcery.com>
Julian Brown <julian@codesourcery.com>
* semantics.c (handle_omp_array_sections_1): Allow array sections with
"this" pointer for OpenACC.
Co-Authored-By: Julian Brown <julian@codesourcery.com>
From-SVN: r265591
2018-09-09 Cesar Philippidis <cesar@codesourcery.com>
Julian Brown <julian@codesourcery.com>
PR middle-end/86336
gcc/cp/
* semantics.c (finish_omp_clauses): Treat C++ references the same in
OpenACC as OpenMP.
gcc/
* gimplify.c (gimplify_scan_omp_clauses): Set
target_firstprivatize_array_bases in OpenACC parallel and kernels
region contexts. Remove GOMP_MAP_FIRSTPRIVATE_REFERENCE clauses from
OpenACC data regions.
libgomp/
* testsuite/libgomp.oacc-c++/non-scalar-data.C: Remove XFAIL.
Co-Authored-By: Julian Brown <julian@codesourcery.com>
From-SVN: r264244
2018-08-21 Nicolas Koenig <koenigni@gcc.gnu.org>
Thomas Koenig <tkoenig@gcc.gnu.org>
PR fortran/25829
* gfortran.texi: Add description of asynchronous I/O.
* trans-decl.c (gfc_finish_var_decl): Treat asynchronous variables
as volatile.
* trans-io.c (gfc_build_io_library_fndecls): Rename st_wait to
st_wait_async and change argument spec from ".X" to ".w".
(gfc_trans_wait): Pass ID argument via reference.
2018-08-21 Nicolas Koenig <koenigni@gcc.gnu.org>
Thomas Koenig <tkoenig@gcc.gnu.org>
PR fortran/25829
* gfortran.dg/f2003_inquire_1.f03: Add write statement.
* gfortran.dg/f2003_io_1.f03: Add wait statement.
2018-08-21 Nicolas Koenig <koenigni@gcc.gnu.org>
Thomas Koenig <tkoenig@gcc.gnu.org>
PR fortran/25829
* Makefile.am: Add async.c to gfor_io_src.
Add async.h to gfor_io_headers.
* Makefile.in: Regenerated.
* gfortran.map: Add _gfortran_st_wait_async.
* io/async.c: New file.
* io/async.h: New file.
* io/close.c: Include async.h.
(st_close): Call async_wait for an asynchronous unit.
* io/file_pos.c (st_backspace): Likewise.
(st_endfile): Likewise.
(st_rewind): Likewise.
(st_flush): Likewise.
* io/inquire.c: Add handling for asynchronous PENDING
and ID arguments.
* io/io.h (st_parameter_dt): Add async bit.
(st_parameter_wait): Correct.
(gfc_unit): Add au pointer.
(st_wait_async): Add prototype.
(transfer_array_inner): Likewise.
(st_write_done_worker): Likewise.
* io/open.c: Include async.h.
(new_unit): Initialize asynchronous unit.
* io/transfer.c (async_opt): New struct.
(wrap_scalar_transfer): New function.
(transfer_integer): Call wrap_scalar_transfer to do the work.
(transfer_real): Likewise.
(transfer_real_write): Likewise.
(transfer_character): Likewise.
(transfer_character_wide): Likewise.
(transfer_complex): Likewise.
(transfer_array_inner): New function.
(transfer_array): Call transfer_array_inner.
(transfer_derived): Call wrap_scalar_transfer.
(data_transfer_init): Check for asynchronous I/O.
Perform a wait operation on any pending asynchronous I/O
if the data transfer is synchronous. Copy PDT and enqueue
thread for data transfer.
(st_read_done_worker): New function.
(st_read_done): Enqueue transfer or call st_read_done_worker.
(st_write_done_worker): New function.
(st_write_done): Enqueue transfer or call st_read_done_worker.
(st_wait): Document as no-op for compatibility reasons.
(st_wait_async): New function.
* io/unit.c (insert_unit): Use macros LOCK, UNLOCK and TRYLOCK;
add NOTE where necessary.
(get_gfc_unit): Likewise.
(init_units): Likewise.
(close_unit_1): Likewise. Call async_close if asynchronous.
(close_unit): Use macros LOCK and UNLOCK.
(finish_last_advance_record): Likewise.
(newunit_alloc): Likewise.
* io/unix.c (find_file): Likewise.
(flush_all_units_1): Likewise.
(flush_all_units): Likewise.
* libgfortran.h (generate_error_common): Add prototype.
* runtime/error.c: Include io.h and async.h.
(generate_error_common): New function.
2018-08-21 Nicolas Koenig <koenigni@gcc.gnu.org>
Thomas Koenig <tkoenig@gcc.gnu.org>
PR fortran/25829
* testsuite/libgomp.fortran/async_io_1.f90: New test.
* testsuite/libgomp.fortran/async_io_2.f90: New test.
* testsuite/libgomp.fortran/async_io_3.f90: New test.
* testsuite/libgomp.fortran/async_io_4.f90: New test.
* testsuite/libgomp.fortran/async_io_5.f90: New test.
* testsuite/libgomp.fortran/async_io_6.f90: New test.
* testsuite/libgomp.fortran/async_io_7.f90: New test.
Co-Authored-By: Thomas Koenig <tkoenig@gcc.gnu.org>
From-SVN: r263750
The CUDA driver API starting version 6.5 offers a set of runtime functions to
calculate several occupancy-related measures, as a replacement for the occupancy
calculator spreadsheet.
This patch adds a heuristic for default runtime launch geometry, based on the
new runtime function cuOccupancyMaxPotentialBlockSize.
Build on x86_64 with nvptx accelerator and ran libgomp testsuite.
2018-08-13 Cesar Philippidis <cesar@codesourcery.com>
Tom de Vries <tdevries@suse.de>
PR target/85590
* plugin/cuda/cuda.h (CUoccupancyB2DSize): New typedef.
(cuOccupancyMaxPotentialBlockSize): Declare.
* plugin/cuda-lib.def (cuOccupancyMaxPotentialBlockSize): New
CUDA_ONE_CALL_MAYBE_NULL.
* plugin/plugin-nvptx.c (CUDA_VERSION < 6050): Define
CUoccupancyB2DSize and declare
cuOccupancyMaxPotentialBlockSize.
(nvptx_exec): Use cuOccupancyMaxPotentialBlockSize to set the
default num_gangs and num_workers when the driver supports it.
Co-Authored-By: Tom de Vries <tdevries@suse.de>
From-SVN: r263505
Cuda driver api functions cuLinkAddData and cuLinkCreate are available starting
version 5.5. In version 6.5, they are remapped onto _v2 versions.
The dlopen interface of the libgomp nvptx plugin uses the _v2 versions, so it
won't work with a cuda driver with driver api version lower than 6.5.
This patch fixes the problem by testing for the presence of the _v2 versions,
and falling back to the original versions in case of absence of the _v2
versions.
Build on x86_64 with nvptx accelerator and reg-tested libgomp, both with and
without --without-cuda-driver.
2018-08-08 Tom de Vries <tdevries@suse.de>
* plugin/cuda-lib.def (cuLinkAddData_v2, cuLinkCreate_v2): Declare using
CUDA_ONE_CALL_MAYBE_NULL.
* plugin/plugin-nvptx.c (cuLinkAddData, cuLinkCreate): Undef and declare.
(cuLinkAddData_v2, cuLinkCreate_v2): Declare.
(link_ptx): Fall back to cuLinkAddData/cuLinkCreate if the _v2 versions
are not found.
From-SVN: r263408
Cuda driver api function cuGetErrorString is available in version 6.0 and
higher.
Currently, when the driver that is used does not contain this function, the
libgomp nvptx plugin will not build (PLUGIN_NVPTX_DYNAMIC == 0) or run
(PLUGIN_NVPTX_DYNAMIC == 1).
This patch fixes this problem by testing for the presence of the function, and
handling absence.
Build on x86_64 with nvptx accelerator and reg-tested libgomp, both with and
without --without-cuda-driver.
2018-08-08 Tom de Vries <tdevries@suse.de>
* plugin/cuda-lib.def (cuGetErrorString): Use CUDA_ONE_CALL_MAYBE_NULL.
* plugin/plugin-nvptx.c (cuda_error): Handle if cuGetErrorString is not
present.
From-SVN: r263407
CU_DEVICE_ATTRIBUTE_MAX_REGISTERS_PER_MULTIPROCESSOR is defined in cuda driver
api version 6.0 and higher.
Currently nvptx_open_device uses a hard-coded constant instead.
This patch fixes that by:
- defining CU_DEVICE_ATTRIBUTE_MAX_REGISTERS_PER_MULTIPROCESSOR to the hardcoded
constant at toplevel, if not present in cuda.h, and
- using CU_DEVICE_ATTRIBUTE_MAX_REGISTERS_PER_MULTIPROCESSOR in nvptx_open_device
Build on x86_64 with nvptx accelerator and reg-tested libgomp.
2018-08-08 Tom de Vries <tdevries@suse.de>
* plugin/plugin-nvptx.c
(CU_DEVICE_ATTRIBUTE_MAX_REGISTERS_PER_MULTIPROCESSOR): Define.
(nvptx_open_device): Use
CU_DEVICE_ATTRIBUTE_MAX_REGISTERS_PER_MULTIPROCESSOR.
From-SVN: r263406
Cuda driver api function cuGetErrorString is available in version 6.0 and
higher.
This patch:
- removes a comment saying the declaration is not available in cuda.h 6.0
- fixes the presence test to use CUDA_VERSION < 6000
- moves the declaration to toplevel
Build on x86_64 with nvptx accelerator and reg-tested libgomp.
2018-08-08 Tom de Vries <tdevries@suse.de>
* plugin/plugin-nvptx.c (cuda_error): Move declaration of cuGetErrorString ...
(cuGetErrorString): ... here. Guard with CUDA_VERSION < 6000.
From-SVN: r263405
This patch adds handling of functions that may not be present in the cuda
driver.
Such a function can be declared using CUDA_ONE_CALL_MAYBE_NULL in cuda-lib.def,
it can be called with the usual convenience macros, but before calling its
presence needs to be tested using new macro CUDA_CALL_EXISTS.
When using the dlopen interface (PLUGIN_NVPTX_DYNAMIC == 1), we allow
non-present functions by allowing dlsym to return NULL. Otherwise
(PLUGIN_NVPTX_DYNAMIC == 0) we declare the non-present function to be weak.
Build and reg-tested libgomp on x86_64 with nvidia accelerator, with and without
--disable-cuda-driver, in combination with a trigger patch that adds a
non-existing function foo to cuda-lib.def:
...
CUDA_ONE_CALL_MAYBE_NULL (foo)
...
and declares it in plugin-nvptx.c:
...
CUresult foo (void);
...
and then uses it in nvptx_init after the init_cuda_lib call:
...
if (CUDA_CALL_EXISTS (foo))
CUDA_CALL (foo);
...
Also build and reg-tested on x86_64 with nvidia accelerator, with and without
--disable-cuda-driver, in combination with a trigger patch that replaces all
CUDA_ONE_CALLs in cuda-lib.def with CUDA_ONE_CALL_MAYBE_NULL, and guards two
CUDA_CALLs with CUDA_CALL_EXISTS, one for a regular fn, and one for a fn that is
a define in cuda/cuda.h.
2018-08-07 Tom de Vries <tdevries@suse.de>
* plugin/plugin-nvptx.c (DO_PRAGMA): Define.
(struct cuda_lib_s): Add def/undef of CUDA_ONE_CALL_MAYBE_NULL.
(init_cuda_lib): Add new param to CUDA_ONE_CALL_1. Add arg to
corresponding call in CUDA_ONE_CALL. Add def/undef of
CUDA_ONE_CALL_MAYBE_NULL.
(CUDA_CALL_EXISTS): Define.
From-SVN: r263346
This patch makes sure that the lifetimes of the CUDA_ONE_CALL macro (which is
defined twice in plugin-nvptx.c) are minimized, to make it obvious that the
definitions are used only in the lib-cuda.def include.
Build on x86_64 with nvptx accelerator and reg-tested libgomp.
2018-08-07 Tom de Vries <tdevries@suse.de>
* plugin/plugin-nvptx.c (struct cuda_lib_s, init_cuda_lib): Put
CUDA_ONE_CALL defines right before the cuda-lib.def include, and the
corresponding undefs right after.
From-SVN: r263345
Using libgomp configure option --with-cuda-driver=<dir> we can indicate what
cuda driver to use to build the libgomp nvptx plugin. Without such an option,
the system cuda driver is used, if available. If not availabe, a dlopen
interface is used instead.
However, when we use --without-cuda-driver (or the equivalent
--with-cuda-driver=no) the system cuda driver is still used if available.
This patch fixes that, making sure that --without-cuda-driver selects the dlopen
interface.
Build on x86_64 with nvptx accelerator and tested libgomp testsuite, with and
without option --without-cuda-driver.
2018-08-04 Tom de Vries <tdevries@suse.de>
* plugin/configfrag.ac: For --without-cuda-driver, set
CUDA_DRIVER_INCLUDE and CUDA_DRIVER_LIB to no. Handle
CUDA_DRIVER_INCLUDE == no and CUDA_DRIVER_LIB == no.
* configure: Regenerate.
From-SVN: r263310
The nvptx port can't support exceptions using sjlj, because ptx does not
support sjlj. However, default_except_unwind_info still returns UI_SJLJ, even
even if we configure with --disable-sjlj-exceptions, because UI_SJLJ is the
fallback option.
The reason default_except_unwind_info doesn't return UI_DWARF2 is because
DWARF2_UNWIND_INFO is not defined in defaults.h, because
INCOMING_RETURN_ADDR_RTX is not defined, because there's no ptx equivalent.
Testcase libgomp.c++/for-15.C currently doesn't compile unless fno-exceptions
is added because:
- it tries to generate sjlj exception handling code, and
- it tries to generate exception tables using label-addressed .byte sequence.
Ptx doesn't support generating random data at a label, nor being able to
load/write data relative to a label.
This patch fixes the first problem by using UI_TARGET for nvptx.
The second problem is worked around by generating all .byte sequences commented
out. It would be better to have a narrower workaround, and define
TARGET_ASM_BYTE_OP to "error: .byte unsupported " or some such.
This patch does not enable exceptions for nvptx, it merely allows c++ programs
to run correctly if they do no use exception handling.
Build and reg-tested on x86_64 with nvptx accelerator.
2018-08-02 Tom de Vries <tdevries@suse.de>
PR target/86660
* common/config/nvptx/nvptx-common.c (nvptx_except_unwind_info): New
function. Return UI_TARGET unconditionally.
(TARGET_EXCEPT_UNWIND_INFO): Redefine to nvptx_except_unwind_info.
* config/nvptx/nvptx.c (TARGET_ASM_BYTE_OP): Emit commented out '.byte'.
* testsuite/libgomp.oacc-c++/routine-1-auto.C: Remove -fno-exceptions.
* testsuite/libgomp.oacc-c++/routine-1-template-auto.C: Same.
* testsuite/libgomp.oacc-c++/routine-1-template-trailing-return-type.C:
Same.
* testsuite/libgomp.oacc-c++/routine-1-template.C: Same.
* testsuite/libgomp.oacc-c++/routine-1-trailing-return-type.C: Same.
* testsuite/libgomp.oacc-c-c++-common/routine-1.c: Same.
From-SVN: r263265
2018-08-01 Tom de Vries <tdevries@suse.de>
* plugin/cuda-lib.def: New file. Factor out of ...
* plugin/plugin-nvptx.c (CUDA_CALLS): ... here.
(struct cuda_lib_s, init_cuda_lib): Include cuda-lib.def instead of
using CUDA_CALLS.
From-SVN: r263208
2018-07-31 Andre Vieira <andre.simoesdiasvieira@arm.com>
Revert 'AsyncI/O patch committed'
2018-07-25 Nicolas Koenig <koenigni@gcc.gnu.org>
Thomas Koenig <tkoenig@gcc.gnu.org>
PR fortran/25829
* gfortran.texi: Add description of asynchronous I/O.
* trans-decl.c (gfc_finish_var_decl): Treat asynchronous variables
as volatile.
* trans-io.c (gfc_build_io_library_fndecls): Rename st_wait to
st_wait_async and change argument spec from ".X" to ".w".
(gfc_trans_wait): Pass ID argument via reference.
2018-07-31 Andre Vieira <andre.simoesdiasvieira@arm.com>
Revert 'AsyncI/O patch committed'
2018-07-25 Nicolas Koenig <koenigni@gcc.gnu.org>
Thomas Koenig <tkoenig@gcc.gnu.org>
PR fortran/25829
* gfortran.dg/f2003_inquire_1.f03: Add write statement.
* gfortran.dg/f2003_io_1.f03: Add wait statement.
2018-07-31 Andre Vieira <andre.simoesdiasvieira@arm.com>
Revert 'AsyncI/O patch committed'
2018-07-25 Nicolas Koenig <koenigni@gcc.gnu.org>
Thomas Koenig <tkoenig@gcc.gnu.org>
PR fortran/25829
* Makefile.am: Add async.c to gfor_io_src.
Add async.h to gfor_io_headers.
* Makefile.in: Regenerated.
* gfortran.map: Add _gfortran_st_wait_async.
* io/async.c: New file.
* io/async.h: New file.
* io/close.c: Include async.h.
(st_close): Call async_wait for an asynchronous unit.
* io/file_pos.c (st_backspace): Likewise.
(st_endfile): Likewise.
(st_rewind): Likewise.
(st_flush): Likewise.
* io/inquire.c: Add handling for asynchronous PENDING
and ID arguments.
* io/io.h (st_parameter_dt): Add async bit.
(st_parameter_wait): Correct.
(gfc_unit): Add au pointer.
(st_wait_async): Add prototype.
(transfer_array_inner): Likewise.
(st_write_done_worker): Likewise.
* io/open.c: Include async.h.
(new_unit): Initialize asynchronous unit.
* io/transfer.c (async_opt): New struct.
(wrap_scalar_transfer): New function.
(transfer_integer): Call wrap_scalar_transfer to do the work.
(transfer_real): Likewise.
(transfer_real_write): Likewise.
(transfer_character): Likewise.
(transfer_character_wide): Likewise.
(transfer_complex): Likewise.
(transfer_array_inner): New function.
(transfer_array): Call transfer_array_inner.
(transfer_derived): Call wrap_scalar_transfer.
(data_transfer_init): Check for asynchronous I/O.
Perform a wait operation on any pending asynchronous I/O
if the data transfer is synchronous. Copy PDT and enqueue
thread for data transfer.
(st_read_done_worker): New function.
(st_read_done): Enqueue transfer or call st_read_done_worker.
(st_write_done_worker): New function.
(st_write_done): Enqueue transfer or call st_read_done_worker.
(st_wait): Document as no-op for compatibility reasons.
(st_wait_async): New function.
* io/unit.c (insert_unit): Use macros LOCK, UNLOCK and TRYLOCK;
add NOTE where necessary.
(get_gfc_unit): Likewise.
(init_units): Likewise.
(close_unit_1): Likewise. Call async_close if asynchronous.
(close_unit): Use macros LOCK and UNLOCK.
(finish_last_advance_record): Likewise.
(newunit_alloc): Likewise.
* io/unix.c (find_file): Likewise.
(flush_all_units_1): Likewise.
(flush_all_units): Likewise.
* libgfortran.h (generate_error_common): Add prototype.
* runtime/error.c: Include io.h and async.h.
(generate_error_common): New function.
2018-07-31 Andre Vieira <andre.simoesdiasvieira@arm.com>
Revert 'AsyncI/O patch committed'.
2018-07-25 Nicolas Koenig <koenigni@gcc.gnu.org>
Thomas Koenig <tkoenig@gcc.gnu.org>
PR fortran/25829
* testsuite/libgomp.fortran/async_io_1.f90: New test.
* testsuite/libgomp.fortran/async_io_2.f90: New test.
* testsuite/libgomp.fortran/async_io_3.f90: New test.
* testsuite/libgomp.fortran/async_io_4.f90: New test.
* testsuite/libgomp.fortran/async_io_5.f90: New test.
* testsuite/libgomp.fortran/async_io_6.f90: New test.
* testsuite/libgomp.fortran/async_io_7.f90: New test.
From-SVN: r263082
Currently parallel-loop-1.c fails at -O0 on a Quadro M1200, because one of the
kernel launch configurations exceeds the resources available in the device, due
to the default dimensions chosen by the runtime.
This patch fixes that by taking the per-function max_threads_per_block into
account when using the default dimensions.
2018-07-30 Tom de Vries <tdevries@suse.de>
* plugin/plugin-nvptx.c (MIN, MAX): Redefine.
(nvptx_exec): Ensure worker and vector default dims don't exceed
targ_fn->max_threads_per_block.
From-SVN: r263062
The default dimensions are calculated using per-device properties, but
initialized once and used on all devices.
This patch fixes this problem by introducing per-device default dimensions.
2018-07-30 Tom de Vries <tdevries@suse.de>
* plugin/plugin-nvptx.c (struct ptx_device): Add default_dims field.
(nvptx_open_device): Init default_dims for device.
(nvptx_exec): Use default_dims from device.
From-SVN: r263061
PR testsuite/86660
* testsuite/libgomp.c++/for-15.C (results): Include it in
omp declare target region.
(main): Use map (always, tofrom: results) instead of
map (tofrom: results).
From-SVN: r263011
PR middle-end/86660
* omp-low.c (scan_sharing_clauses): Don't ignore map clauses for
declare target to variables if they have always,{to,from,tofrom} map
kinds.
* testsuite/libgomp.c/pr86660.c: New test.
From-SVN: r263010
Currently, when a kernel is lauched with too many workers, it results in a cuda
launch failure. This is triggered f.i. for parallel-loop-1.c at -O0 on a Quadro
M1200.
This patch detects this situation, and errors out with a hint on how to fix it.
Build and reg-tested on x86_64 with nvptx accelerator.
2018-07-26 Cesar Philippidis <cesar@codesourcery.com>
Tom de Vries <tdevries@suse.de>
* plugin/plugin-nvptx.c (nvptx_exec): Error if the hardware doesn't have
sufficient resources to launch a kernel, and give a hint on how to fix
it.
Co-Authored-By: Tom de Vries <tdevries@suse.de>
From-SVN: r262997
Move sampling of device properties from nvptx_exec to nvptx_open, and assume
the sampling always succeeds. This simplifies the default dimension
initialization code in nvptx_open.
2018-07-26 Cesar Philippidis <cesar@codesourcery.com>
Tom de Vries <tdevries@suse.de>
* plugin/plugin-nvptx.c (struct ptx_device): Add warp_size,
max_threads_per_block and max_threads_per_multiprocessor fields.
(nvptx_open_device): Initialize new fields.
(nvptx_exec): Use num_sms, and new fields.
Co-Authored-By: Tom de Vries <tdevries@suse.de>
From-SVN: r262996
In testcase lib-12.f90, all acc_async_test calls are placed in a location
where they are not guaranteed to succeed, which explains why there's an xfail
for the lower optimization levels.
This patch fixes the problem by moving the acc_async_test calls to the correct
locations.
Reg-tested on x86_64 with nvptx accelerator.
2018-07-26 Tom de Vries <tdevries@suse.de>
* testsuite/libgomp.oacc-fortran/lib-12.f90: Move acc_async_test calls
to correct locations. Remove xfail.
From-SVN: r262990
The purpose of the lib-13.f90 test-case is to test acc_wait_all_async. The
test indeed calls acc_wait_all_async, but then subsequentlys calls
acc_wait_all, so the acc_wait_all_async functionality is not tested.
Furthermore, all acc_async_test calls are placed in a location where they are
not guaranteed to succeed, which explains why there's an xfail for the lower
optimization levels.
This patch fixes the problems by replacing acc_wait_all with an acc_wait on
the async id used for the acc_wait_all_async call, and moving the
acc_async_test calls to the correct locations.
Reg-tested on x86_64 with nvptx accelerator.
2018-07-26 Tom de Vries <tdevries@suse.de>
* testsuite/libgomp.oacc-fortran/lib-13.f90: Replace acc_wait_all with
acc_wait. Move acc_async_test calls to correct locations. Remove
xfail.
From-SVN: r262989
2018-07-25 Nicolas Koenig <koenigni@gcc.gnu.org>
Thomas Koenig <tkoenig@gcc.gnu.org>
PR fortran/25829
* gfortran.texi: Add description of asynchronous I/O.
* trans-decl.c (gfc_finish_var_decl): Treat asynchronous variables
as volatile.
* trans-io.c (gfc_build_io_library_fndecls): Rename st_wait to
st_wait_async and change argument spec from ".X" to ".w".
(gfc_trans_wait): Pass ID argument via reference.
2018-07-25 Nicolas Koenig <koenigni@gcc.gnu.org>
Thomas Koenig <tkoenig@gcc.gnu.org>
PR fortran/25829
* gfortran.dg/f2003_inquire_1.f03: Add write statement.
* gfortran.dg/f2003_io_1.f03: Add wait statement.
2018-07-25 Nicolas Koenig <koenigni@gcc.gnu.org>
Thomas Koenig <tkoenig@gcc.gnu.org>
PR fortran/25829
* Makefile.am: Add async.c to gfor_io_src.
Add async.h to gfor_io_headers.
* Makefile.in: Regenerated.
* gfortran.map: Add _gfortran_st_wait_async.
* io/async.c: New file.
* io/async.h: New file.
* io/close.c: Include async.h.
(st_close): Call async_wait for an asynchronous unit.
* io/file_pos.c (st_backspace): Likewise.
(st_endfile): Likewise.
(st_rewind): Likewise.
(st_flush): Likewise.
* io/inquire.c: Add handling for asynchronous PENDING
and ID arguments.
* io/io.h (st_parameter_dt): Add async bit.
(st_parameter_wait): Correct.
(gfc_unit): Add au pointer.
(st_wait_async): Add prototype.
(transfer_array_inner): Likewise.
(st_write_done_worker): Likewise.
* io/open.c: Include async.h.
(new_unit): Initialize asynchronous unit.
* io/transfer.c (async_opt): New struct.
(wrap_scalar_transfer): New function.
(transfer_integer): Call wrap_scalar_transfer to do the work.
(transfer_real): Likewise.
(transfer_real_write): Likewise.
(transfer_character): Likewise.
(transfer_character_wide): Likewise.
(transfer_complex): Likewise.
(transfer_array_inner): New function.
(transfer_array): Call transfer_array_inner.
(transfer_derived): Call wrap_scalar_transfer.
(data_transfer_init): Check for asynchronous I/O.
Perform a wait operation on any pending asynchronous I/O
if the data transfer is synchronous. Copy PDT and enqueue
thread for data transfer.
(st_read_done_worker): New function.
(st_read_done): Enqueue transfer or call st_read_done_worker.
(st_write_done_worker): New function.
(st_write_done): Enqueue transfer or call st_read_done_worker.
(st_wait): Document as no-op for compatibility reasons.
(st_wait_async): New function.
* io/unit.c (insert_unit): Use macros LOCK, UNLOCK and TRYLOCK;
add NOTE where necessary.
(get_gfc_unit): Likewise.
(init_units): Likewise.
(close_unit_1): Likewise. Call async_close if asynchronous.
(close_unit): Use macros LOCK and UNLOCK.
(finish_last_advance_record): Likewise.
(newunit_alloc): Likewise.
* io/unix.c (find_file): Likewise.
(flush_all_units_1): Likewise.
(flush_all_units): Likewise.
* libgfortran.h (generate_error_common): Add prototype.
* runtime/error.c: Include io.h and async.h.
(generate_error_common): New function.
2018-07-25 Nicolas Koenig <koenigni@gcc.gnu.org>
Thomas Koenig <tkoenig@gcc.gnu.org>
PR fortran/25829
* testsuite/libgomp.fortran/async_io_1.f90: New test.
* testsuite/libgomp.fortran/async_io_2.f90: New test.
* testsuite/libgomp.fortran/async_io_3.f90: New test.
* testsuite/libgomp.fortran/async_io_4.f90: New test.
* testsuite/libgomp.fortran/async_io_5.f90: New test.
* testsuite/libgomp.fortran/async_io_6.f90: New test.
* testsuite/libgomp.fortran/async_io_7.f90: New test.
Co-Authored-By: Thomas Koenig <tkoenig@gcc.gnu.org>
From-SVN: r262978
PR middle-end/86542
* omp-low.c (create_task_copyfn): Copy over also fields corresponding
to _looptemp_ clauses, other than the first two.
* testsuite/libgomp.c++/pr86542.C: New test.
From-SVN: r262815
PR middle-end/86539
* gimplify.c (gimplify_omp_for): Ensure taskloop firstprivatized init
and cond temporaries don't have reference type if iterator has
pointer type. For init use &for_pre_body instead of pre_p if
for_pre_body is non-empty.
* testsuite/libgomp.c++/pr86539.C: New test.
From-SVN: r262776
PR c++/86443
* gimplify.c (find_combined_omp_for): Add DATA argument, in addition
to finding the inner OMP_FOR/OMP_SIMD stmt find non-trivial wrappers,
BLOCKs with BLOCK_VARs, OMP_PARALLEL in between, OMP_FOR in between.
(gimplify_omp_for): For composite loops, move outer
OMP_{DISTRIBUTE,TASKLOOP,FOR,PARALLEL} right around innermost
OMP_FOR/OMP_SIMD if there are any non-trivial wrappers. For class
iterators add any needed clauses. Allow OMP_FOR_ORIG_DECLS to contain
TREE_LIST for both the original class iterator and the "last" helper
var. Gimplify OMP_FOR_PRE_BODY before the outermost composite
loop, remember has_decl_expr from outer composite loops for the
innermost OMP_SIMD in TREE_PRIVATE bit on OMP_FOR_INIT.
gcc/c-family/
* c-omp.c (c_omp_check_loop_iv_r, c_omp_check_loop_iv): Allow declv
to contain TREE_LIST for both the original class iterator and the
"last" helper var.
gcc/cp/
* semantics.c (handle_omp_for_class_iterator): Remove lastp argument,
instead of setting *lastp turn orig_declv elt into a TREE_LIST.
(finish_omp_for): Adjust handle_omp_for_class_iterator caller.
* pt.c (tsubst_omp_for_iterator): Allow OMP_FOR_ORIG_DECLS to contain
TREE_LIST for both the original class iterator and the "last" helper
var.
libgomp/
* testsuite/libgomp.c++/for-15.C: New test.
From-SVN: r262534
2018-05-09 Tom de Vries <tom@codesourcery.com>
PR libgomp/82901
* oacc-parallel.c (GOACC_declare): Use GOMP_ASYNC_SYNC as async argument
to GOACC_enter_exit_data.
From-SVN: r260085
2018-05-07 Tom de Vries <tom@codesourcery.com>
PR testsuite/85677
* testsuite/lib/libgomp.exp (libgomp_init): Move inclusion of top-level
include directory in ALWAYS_CFLAGS out of $blddir != "" condition.
From-SVN: r259992
2018-05-03 Tom de Vries <tom@codesourcery.com>
PR testsuite/85106
* lib/scanoffloadtree.exp: New file.
* testsuite/lib/libgomp-dg.exp (libgomp-dg-test): Add save-temps to
extra_tool_flags if it contains an -foffload=-fdump-* flag.
* testsuite/lib/libgomp.exp: Include scanoffloadtree.exp.
* testsuite/libgomp.oacc-c/vec.c: Use scan-offload-tree-dump.
* doc/sourcebuild.texi (Commands for use in dg-final, Scan optimization
dump files): Add offload-tree.
From-SVN: r259892
2018-05-02 Tom de Vries <tom@codesourcery.com>
PR testsuite/85106
* gcc.dg/ipa/ipa-icf-38.c: Use scan-ltrans-tree-dump.
* lib/scanltranstree.exp: New file.
* lib/target-supports.exp (scan-ltrans-tree-dump_required_options)
(scan-ltrans-tree-dump-times_required_options)
(scan-ltrans-tree-dump-not_required_options)
(scan-ltrans-tree-dump-dem_required_options)
(scan-ltrans-tree-dump-dem-not_required_options): New proc.
* lib/gcc-dg.exp: Include scanltranstree.exp.
* testsuite/lib/libatomic.exp: Include scanltranstree.exp.
* testsuite/lib/libgomp.exp: Include scanltranstree.exp.
* testsuite/lib/libitm.exp: Include scanltranstree.exp.
* testsuite/lib/libvtv.exp: Include scanltranstree.exp.
* doc/sourcebuild.texi (Commands for use in dg-final, Scan optimization
dump files): Add ltrans-tree.
From-SVN: r259838
2018-05-02 Tom de Vries <tom@codesourcery.com>
PR testsuite/85106
* gcc.dg/ipa/ipa-icf-38.c: New test.
* gcc.dg/ipa/ipa-icf-38a.c: New test.
* lib/scandump.exp (dump-base): New proc.
(scan-dump, scan-dump-times, scan-dump-not, scan-dump-dem)
(scan-dump-dem-not): Add and handle parameter for suffix of the dump
base.
* lib/scanipa.exp: Add "" argument to scan-dump calls.
* lib/scanlang.exp: Same.
* lib/scanrtl.exp: Same.
* lib/scantree.exp: Same.
* lib/scanwpaipa.exp: New file.
* lib/gcc-dg.exp: Include scanwpaipa.exp.
* testsuite/lib/libatomic.exp: Include scanwpaipa.exp.
* testsuite/lib/libgomp.exp: Include scanwpaipa.exp.
* testsuite/lib/libitm.exp: Include scanwpaipa.exp.
* testsuite/lib/libvtv.exp: Include scanwpaipa.exp.
* doc/sourcebuild.texi (Commands for use in dg-final, Scan optimization
dump files): Add wpa-ipa.
From-SVN: r259837
2018-04-29 Julian Brown <julian@codesourcery.com>
Tom de Vries <tom@codesourcery.com>
PR testsuite/85527
* testsuite/libgomp.oacc-c-c++-common/atomic_capture-1.c: Allow
arbitrary order for iterations of atomic subtract check.
Co-Authored-By: Tom de Vries <tom@codesourcery.com>
From-SVN: r259748
2018-04-28 Tom de Vries <tom@codesourcery.com>
PR testsuite/85527
* testsuite/libgomp.oacc-fortran/atomic_capture-1.f90 (main): Store
atomic capture results obtained in parallel loop to an array, instead of
to a scalar.
From-SVN: r259733
Joseph Myers
Cesar Philippidis
Martin Liska
Nicolas Koenig
Tom de Vries
Andre Vieira
Jakub Jelinek
Jakub Jelinek
Gerald Pfeifer
Chung-Lin Tang
Janus Weil
Tom de Vries
Julian Brown