2018-12-21 Steven G. Kargl <kargl@gcc.gnu.org>
PR fortran/69121
* ieee/ieee_arithmetic.F90: Provide missing interfaces for IEEE_SCALB.
2018-12-21 Steven G. Kargl <kargl@gcc.gnu.org>
PR fortran/69121
* gfortran.dg/ieee/ieee_9.f90: New test.
From-SVN: r267343
2018-12-20 Steven G. Kargl <kargl@gcc.gnu.org>
* libgfortran/ieee/ieee_arithmetic.F90: Re-organize file to
eliminate #ifdef ... #endif. No functional change.
From-SVN: r267312
2018-12-09 Thomas Koenig <tkoenig@gcc.gnu.org>
PR fortran/88411
* io/transfer.c (dta_transfer_init): Do not treat as an
asynchronous statement unless the statement has
ASYNCHRONOUS="YES".
(st_write_done): Likewise.
(st_read_done): Do not perform async_wait for synchronous I/O
on an async unit.
(st_read_done): Likewise.
2018-12-09 Thomas Koenig <tkoenig@gcc.gnu.org>
PR fortran/88411
* testsuite/libgomp.fortran/async_io_8.f90: New test.
From-SVN: r266929
As the static backtrace state pointer can be accessed from multiple
threads, use atomics to access it.
Regtested on x86_64-pc-linux-gnu.
libgfortran/ChangeLog:
2018-12-02 Janne Blomqvist <jb@gcc.gnu.org>
PR libfortran/88137
* runtime/backtrace.c (show_backtrace): Use atomic load/store to
access the static lbstate pointer.
From-SVN: r266724
From backtrace.h for backtrace_create_state:
Calling this function allocates resources that can not be freed.
There is no backtrace_free_state function. The state is used to
cache information that is expensive to recompute. Programs are
expected to call this function at most once and to save the return
value for all later calls to backtrace functions.
So instead of calling backtrace_create_state every time we wish to
show a backtrace, do it once and store the result in a static
variable. libbacktrace allows multiple threads to access the state,
so no need to use TLS.
Regtested on x86_64-pc-linux-gnu.
libgfortran/ChangeLog:
2018-11-30 Janne Blomqvist <jb@gcc.gnu.org>
PR libfortran/88137
* runtime/backtrace.c (show_backtrace): Make lbstate a static
variable, initialize once.
From-SVN: r266677
With multiple threads, using an unprotected static variable to check
whether recursion has occured isn't valid, as one thread might have
modified the variable, thus causing another thread to incorrectly
conclude that recursion has occured. This patch avoids this problem
by using a thread-specific variable for the recursion check.
Regtested on x86_64-pc-linux-gnu.
libgfortran/ChangeLog:
2018-11-23 Janne Blomqvist <jb@gcc.gnu.org>
* runtime/error.c (MAGIC): Remove.
(recursion_key): New variable.
(recursion_check): Use thread-specific variable for recursion
check if threads are active.
(constructor_recursion_check): New function.
(destructor_recursion_check): New funcion.
From-SVN: r266419
The old __sync builtins have been deprecated for a long time now in
favor of the __atomic builtins following the C++11/C11 memory model.
This patch converts libgfortran to use the modern __atomic builtins.
At the same time I weakened the consistency to relaxed for
incrementing and decrementing the counter, and acquire-release when
decrementing to check whether the counter is 0 and the unit can be
freed. This is similar to e.g. std::shared_ptr in C++.
Regtested on x86_64-pc-linux-gnu.
libgfortran/ChangeLog:
2018-11-22 Janne Blomqvist <jb@gcc.gnu.org>
* acinclude.m4 (LIBGFOR_CHECK_ATOMIC_FETCH_ADD): Rename and test
presence of atomic builtins instead of sync builtins.
* configure.ac (LIBGFOR_CHECK_ATOMIC_FETCH_ADD): Call new test.
* io/io.h (inc_waiting_locked): Use __atomic_fetch_add.
(predec_waiting_locked): Use __atomic_add_fetch.
(dec_waiting_unlocked): Use __atomic_fetch_add.
* config.h.in: Regenerated.
* configure: Regenerated.
* Makefile.in: Regenerated.
From-SVN: r266367
2018-11-08 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/78351
* io/transfer.c (read_sf_internal): Add support for early
comma termination of internal unit formatted reads.
* gfortran.dg/read_legacy_comma.f90: New test.
From-SVN: r265946
This patch updates GCC to use autoconf 2.69 and automake 1.15.1.
(That's not the latest automake version, but it's the one used by
binutils-gdb, with which consistency is desirable, and in any case
seems a useful incremental update that should make a future update to
1.16.1 easier.)
The changes are generally similar to the binutils-gdb ones, and are
copied from there where shared files and directories are involved
(there are some further changes to such shared directories, however,
which I'd expect to apply to binutils-gdb once this patch is in GCC).
Largely, obsolete AC_PREREQ calls are removed, while many
AC_LANG_SOURCE calls are added to avoid warnings from aclocal and
autoconf. Multilib support is no longer included in core automake,
meaning that multilib.am needs copying from automake's contrib
directory into the GCC source tree. Autoconf 2.69 has Go support, so
local copies of that support are removed. I hope the D support will
soon be submitted to upstream autoconf so the local copy of that can
be removed in a future update. Changes to how automake generates
runtest calls mean quotes are removed from RUNTEST definitions in five
lib*/testsuite/Makefile.am files (libatomic, libgomp, libitm,
libphobos, libvtv; some others have RUNTEST definitions without
quotes, which are still OK); libgo and libphobos also get
-Wno-override added to AM_INIT_AUTOMAKE so those overrides of RUNTEST
do not generate automake warnings.
Note that the regeneration did not include regeneration of
fixincludes/config.h.in (attempting such regeneration resulted in all
the USED_FOR_TARGET conditionals disappearing; and I don't see
anything in the fixincludes/ directory that would result in such
conditionals being generated, unlike in the gcc/ directory). Also
note that libvtv/testsuite/other-tests/Makefile.in was not
regenerated; that directory is not listed as a subdirectory for which
Makefile.in gets regenerated by calling "automake" in libvtv/, so I'm
not sure how it's meant to be regenerated.
While I mostly fixed warnings should running aclocal / automake /
autoconf, there were various such warnings from automake in the
libgfortran, libgo, libgomp, liboffloadmic, libsanitizer, libphobos
directories that I did not fix, preferring to leave those to the
relevant subsystem maintainers. Specifically, most of those warnings
were of the following form (example from libgfortran):
Makefile.am:48: warning: source file 'caf/single.c' is in a subdirectory,
Makefile.am:48: but option 'subdir-objects' is disabled
automake: warning: possible forward-incompatibility.
automake: At least a source file is in a subdirectory, but the 'subdir-objects'
automake: automake option hasn't been enabled. For now, the corresponding output
automake: object file(s) will be placed in the top-level directory. However,
automake: this behaviour will change in future Automake versions: they
will
automake: unconditionally cause object files to be placed in the same subdirectory
automake: of the corresponding sources.
automake: You are advised to start using 'subdir-objects' option throughout your
automake: project, to avoid future incompatibilities.
I think it's best for the relevant maintainers to add subdir-objects
and do any other associated Makefile.am changes needed. In some cases
the paths in the warnings involved ../; I don't know if that adds any
extra complications to the use of subdir-objects.
I've tested this with native, cross and Canadian cross builds. The
risk of any OS-specific issues should I hope be rather lower than if a
libtool upgrade were included (we *should* do such an upgrade at some
point, but it's more complicated - it involves identifying all our
local libtool changes to see if any aren't included in the upstream
version we update to, and reverting an upstream libtool patch that's
inappropriate for use in GCC); I think it would be better to get this
update into GCC so that people can test in different configurations
and we can fix any issues found, rather than to try to get more and
more testing done before it goes in.
top level:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* multilib.am: New file. From automake.
Merge from binutils-gdb:
2018-06-19 Simon Marchi <simon.marchi@ericsson.com>
* libtool.m4: Use AC_LANG_SOURCE.
* configure.ac: Remove AC_PREREQ, use AC_LANG_SOURCE.
* ar-lib: New file.
* test-driver: New file.
* configure: Re-generate.
config:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* math.m4, tls.m4: Use AC_LANG_SOURCE.
Merge from binutils-gdb:
2018-06-19 Simon Marchi <simon.marchi@ericsson.com>
* override.m4 (_GCC_AUTOCONF_VERSION): Bump from 2.64 to 2.69.
fixincludes:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ.
* aclocal.m4, configure: Regenerate.
gcc:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE. Use single
line for second argument of AC_DEFINE_UNQUOTED.
* doc/install.texi (Tools/packages necessary for modifying GCC):
Update to autoconf 2.69 and automake 1.15.1.
* aclocal.m4, config.in, configure: Regenerate.
gnattools:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ.
* configure: Regenerate.
gotools:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* config/go.m4: Remove file.
* Makefile.am (ACLOCAL_AMFLAGS): Do not use -I ./config.
* configure.ac: Remove AC_PREREQ. Do not include config/go.m4.
* Makefile.in, aclocal.m4, configure: Regenerate.
intl:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
Merge from binutils-gdb:
2018-06-19 Simon Marchi <simon.marchi@ericsson.com>
* configure.ac: Add AC_USE_SYSTEM_EXTENSIONS, remove AC_PREREQ.
* configure: Re-generate.
* config.h.in: Re-generate.
* aclocal.m4: Re-generate.
libada:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ.
* configure: Regenerate.
libatomic:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
* acinclude.m4: Use AC_LANG_SOURCE.
* configure.ac: Remove AC_PREREQ.
* testsuite/Makefile.am (RUNTEST): Remove quotes.
* Makefile.in, aclocal.m4, configure, testsuite/Makefile.in:
Regenerate.
libbacktrace:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
* configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE.
* Makefile.in, aclocal.m4, config.h.in, configure: Regenerate.
libcc1:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ.
* Makefile.in, aclocal.m4, configure: Regenerate.
libcpp:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE.
* aclocal.m4, config.in, configure: Regenerate.
libdecnumber:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
Merge from binutils-gdb:
2018-06-19 Simon Marchi <simon.marchi@ericsson.com>
* configure.ac: Remove AC_PREREQ.
* configure: Re-generate.
* aclocal.m4.
libffi:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
(AUTOMAKE_OPTIONS): Add info-in-builddir.
(CLEANFILES): Remove doc/libffi.info.
* configure.ac: Remove AC_PREREQ.
* Makefile.in, aclocal.m4, configure, fficonfig.h.in,
include/Makefile.in, man/Makefile.in, testsuite/Makefile.in:
Regenerate.
libgcc:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE.
* configure: Regenerate.
libgfortran:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
* configure.ac: Remove AC_PREREQ.
* Makefile.in, aclocal.m4, config.h.in, configure: Regenerate.
libgo [logically part of this change but omitted from the commit]:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
* config/go.m4: Remove file.
* config/libtool.m4: Use AC_LANG_SOURCE.
* configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE. Use
-Wno-override in AM_INIT_AUTOMAKE call.
* Makefile.in, aclocal.m4, configure, testsuite/Makefile.in:
Regenerate.
libgomp:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am
(AUTOMAKE_OPTIONS): Add info-in-builddir.
(CLEANFILES): Remove libgomp.info.
* configure.ac: Remove AC_PREREQ.
* testsuite/Makefile.am (RUNTEST): Remove quotes.
* Makefile.in, aclocal.m4, configure, testsuite/Makefile.in:
Regenerate.
libhsail-rt:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ.
* Makefile.in, aclocal.m4, configure: Regenerate.
libiberty:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
Merge from binutils-gdb:
2018-06-19 Simon Marchi <simon.marchi@ericsson.com>
* configure.ac: Remove AC_PREREQ.
* configure: Re-generate.
* config.in: Re-generate.
libitm:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
(AUTOMAKE_OPTIONS): Add info-in-builddir.
(CLEANFILES): Remove libitm.info.
* configure.ac: Remove AC_PREREQ.
* testsuite/Makefile.am (RUNTEST): Remove quotes.
* Makefile.in, aclocal.m4, configure, testsuite/Makefile.in:
Regenerate.
libobjc:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ.
* aclocal.m4, config.h.in, configure: Regenerate.
liboffloadmic:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
* configure.ac: Remove AC_PREREQ.
* plugin/Makefile.am: Include multilib.am.
* plugin/configure.ac: Remove AC_PREREQ.
* Makefile.in, aclocal.m4, configure, plugin/Makefile.in,
plugin/aclocal.m4, plugin/configure: Regenerate.
libphobos:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
* configure.ac: Remove AC_PREREQ. Use -Wno-override in
AM_INIT_AUTOMAKE call.
* m4/autoconf.m4: Add extra argument to AC_LANG_DEFINE call.
* m4/druntime/os.m4: Use AC_LANG_SOURCE.
* testsuite/Makefile.am (RUNTEST): Remove quotes.
* Makefile.in, aclocal.m4, configure, libdruntime/Makefile.in,
src/Makefile.in, testsuite/Makefile.in: Regenerate.
libquadmath:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
(AUTOMAKE_OPTIONS): Remove 1.8. Add info-in-builddir.
(all-local): Define outside conditional code.
(CLEANFILES): Remove libquadmath.info.
* configure.ac: Remove AC_PREREQ.
* Makefile.in, aclocal.m4, config.h.in, configure: Regenerate.
libsanitizer:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
* configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE.
* Makefile.in, aclocal.m4, asan/Makefile.in, configure,
interception/Makefile.in, libbacktrace/Makefile.in,
lsan/Makefile.in, sanitizer_common/Makefile.in, tsan/Makefile.in,
ubsan/Makefile.in: Regenerate.
libssp:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
(AUTOMAKE_OPTIONS): Remove 1.9.5.
* configure.ac: Remove AC_PREREQ. Quote argument to
AC_RUN_IFELSE.
* Makefile.in, aclocal.m4, configure: Regenerate.
libstdc++-v3:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
* configure.ac: Remove AC_PREREQ.
* Makefile.in, aclocal.m4, configure, doc/Makefile.in,
include/Makefile.in, libsupc++/Makefile.in, po/Makefile.in,
python/Makefile.in, src/Makefile.in, src/c++11/Makefile.in,
src/c++17/Makefile.in, src/c++98/Makefile.in,
src/filesystem/Makefile.in, testsuite/Makefile.in: Regenerate.
libvtv:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
* configure.ac: Remove AC_PREREQ.
* testsuite/Makefile.am (RUNTEST): Remove quotes.
* Makefile.in, aclocal.m4, configure, testsuite/Makefile.in:
Regenerate.
lto-plugin:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE.
* Makefile.in, aclocal.m4, config.h.in, configure: Regenerate.
zlib:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
Merge from binutils-gdb:
2018-06-19 Simon Marchi <simon.marchi@ericsson.com>
* configure.ac: Modernize AC_INIT call, remove AC_PREREQ.
* Makefile.am (AUTOMAKE_OPTIONS): Remove 1.8, cygnus, add foreign.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* configure: Re-generate.
From-SVN: r265695
This patch cleans up a few places where I noticed the code was still
using int instead gfc_charlen_type for string lengths. Regtested on
x86_64-pc-linux-gnu, committed as obvious.
libgfortran/ChangeLog:
2018-10-06 Janne Blomqvist <jb@gcc.gnu.org>
* io/unix.c (compare_file_filename): Use gfc_charlen_type instead
of int for string length.
(inquire_sequential): Likewise.
(inquire_direct): Likewise.
(inquire_formatted): Likewise.
(inquire_unformatted): Likewise.
(inquire_access): Likewise.
(inquire_read): Likewise.
(inquire_write): Likewise.
(inquire_readwrite): Likewise.
* io/unix.h (compare_file_filename): Likewise.
(inquire_sequential): Likewise.
(inquire_direct): Likewise.
(inquire_formatted): Likewise.
(inquire_unformatted): Likewise.
(inquire_read): Likewise.
(inquire_write): Likewise.
(inquire_readwrite): Likewise.
From-SVN: r264901
When producing error and warning messages, libgfortran writes a
message by using many system calls. By using vectored writes (the
POSIX writev function) when available and feasible to use without
major surgery, we reduce the chance that output gets intermingled with
other output to stderr.
In practice, this is done by introducing a new function estr_writev in
addition to the existing estr_write. In order to use this, the old
st_vprintf is removed, replaced by direct calls of vsnprintf, allowing
more message batching.
Regtested on x86_64-pc-linux-gnu.
libgfortran/ChangeLog:
2018-09-21 Janne Blomqvist <jb@gcc.gnu.org>
* config.h.in: Regenerated.
* configure: Regenerated.
* configure.ac: Check for writev and sys/uio.h.
* libgfortran.h: Include sys/uio.h.
(st_vprintf): Remove prototype.
(struct iovec): Define if not available.
(estr_writev): New prototype.
* runtime/backtrace.c (error_callback): Use estr_writev.
* runtime/error.c (ST_VPRINTF_SIZE): Remove.
(estr_writev): New function.
(st_vprintf): Remove.
(gf_vsnprintf): New function.
(ST_ERRBUF_SIZE): New macro.
(st_printf): Use vsnprintf.
(os_error): Use estr_writev.
(runtime_error): Use vsnprintf and estr_writev.
(runtime_error_at): Likewise.
(runtime_warning_at): Likewise.
(internal_error): Use estr_writev.
(generate_error_common): Likewise.
(generate_warning): Likewise.
(notify_std): Likewise.
* runtime/pause.c (pause_string): Likewise.
* runtime/stop.c (report_exception): Likewise.
(stop_string): Likewise.
(error_stop_string): Likewise.
From-SVN: r264487
I've been tracking down a bug in a Fortran program on a newlib target and it boils down to fallback_access doing something bad.
The unconditional calls to close cause havoc when open doesn't get called due to the short-circuiting in the if-statement above
because the fd is uninitialised. In my environment GCC ends up calling close on file descriptor 0, thus trying to close stdin.
This patch tightens up the calling so that close is called only when the corresponding open call succeeded.
With this my runtime failure disappears.
Bootstrapped and tested on aarch64-none-linux-gnu.
Though that doesn't exercise this call I hope it's an obviously correct change.
* io/unix.c (fallback_access): Avoid calling close on
uninitialized file descriptor.
From-SVN: r264305
Fortran STOP and ERROR STOP use a different function to print the "STOP" string
and the message string. On GCN this results in out-of-order output, such as
"<msg>ERROR STOP ".
This patch fixes the problem by making estr_write use the proper Fortran write,
not C printf, so both parts are now output the same way. This also ensures
that both parts are output to STDERR (not that that means anything on GCN).
2018-09-12 Kwok Cheung Yeung <kcy@codesourcery.com>
libgfortran/
* runtime/minimal.c (estr_write): Define in terms of write.
From-SVN: r264239
The minimal libgfortran setup was created for NVPTX, but will also be used by
AMD GCN.
This patch simply removes an assumption that NVPTX is the only user.
Specifically, NVPTX exit is broken, but AMD GCN exit works just fine.
2018-09-12 Andrew Stubbs <ams@codesourcery.com>
libgfortran/
* runtime/minimal.c (exit): Only work around nvptx bugs on nvptx.
From-SVN: r264238
As pointed out by Bernhard Reutner-Fischer, this function is unused
since the fix for PR 53796 in November 2017.
2018-09-07 Janne Blomqvist <jb@gcc.gnu.org>
* runtime/environ.c (init_unsigned_integer): Remove.
From-SVN: r264163
2018-09-01 Jerry DeLisle <jvdelisle@gcc.gnu.org>
* io/io.h: Change declaration of vlist type to
gfc_full_array_i4 to eliminate warning for mismatched type.
* io/format.c ((parse_format_list): Use gfc_full_array_i4.
* io/io.h: Use gfc_full_array_i4.
From-SVN: r264043
2018-08-22 Thomas Koenig <tkoenig@gcc.gnu.org>
* gfortran.texi: Mention that asynchronous I/O does
not work on systems which lack condition variables, such
as AIX.
2018-08-22 Thomas Koenig <tkoenig@gcc.gnu.org>
* async.h: Set ASYNC_IO to zero if _AIX is defined.
(struct adv_cond): If ASYNC_IO is zero, the struct has no members.
(async_unit): If ASYNC_IO is zero, remove unneeded members.
From-SVN: r263788
2018-08-21 Nicolas Koenig <koenigni@gcc.gnu.org>
Thomas Koenig <tkoenig@gcc.gnu.org>
PR fortran/25829
* gfortran.texi: Add description of asynchronous I/O.
* trans-decl.c (gfc_finish_var_decl): Treat asynchronous variables
as volatile.
* trans-io.c (gfc_build_io_library_fndecls): Rename st_wait to
st_wait_async and change argument spec from ".X" to ".w".
(gfc_trans_wait): Pass ID argument via reference.
2018-08-21 Nicolas Koenig <koenigni@gcc.gnu.org>
Thomas Koenig <tkoenig@gcc.gnu.org>
PR fortran/25829
* gfortran.dg/f2003_inquire_1.f03: Add write statement.
* gfortran.dg/f2003_io_1.f03: Add wait statement.
2018-08-21 Nicolas Koenig <koenigni@gcc.gnu.org>
Thomas Koenig <tkoenig@gcc.gnu.org>
PR fortran/25829
* Makefile.am: Add async.c to gfor_io_src.
Add async.h to gfor_io_headers.
* Makefile.in: Regenerated.
* gfortran.map: Add _gfortran_st_wait_async.
* io/async.c: New file.
* io/async.h: New file.
* io/close.c: Include async.h.
(st_close): Call async_wait for an asynchronous unit.
* io/file_pos.c (st_backspace): Likewise.
(st_endfile): Likewise.
(st_rewind): Likewise.
(st_flush): Likewise.
* io/inquire.c: Add handling for asynchronous PENDING
and ID arguments.
* io/io.h (st_parameter_dt): Add async bit.
(st_parameter_wait): Correct.
(gfc_unit): Add au pointer.
(st_wait_async): Add prototype.
(transfer_array_inner): Likewise.
(st_write_done_worker): Likewise.
* io/open.c: Include async.h.
(new_unit): Initialize asynchronous unit.
* io/transfer.c (async_opt): New struct.
(wrap_scalar_transfer): New function.
(transfer_integer): Call wrap_scalar_transfer to do the work.
(transfer_real): Likewise.
(transfer_real_write): Likewise.
(transfer_character): Likewise.
(transfer_character_wide): Likewise.
(transfer_complex): Likewise.
(transfer_array_inner): New function.
(transfer_array): Call transfer_array_inner.
(transfer_derived): Call wrap_scalar_transfer.
(data_transfer_init): Check for asynchronous I/O.
Perform a wait operation on any pending asynchronous I/O
if the data transfer is synchronous. Copy PDT and enqueue
thread for data transfer.
(st_read_done_worker): New function.
(st_read_done): Enqueue transfer or call st_read_done_worker.
(st_write_done_worker): New function.
(st_write_done): Enqueue transfer or call st_read_done_worker.
(st_wait): Document as no-op for compatibility reasons.
(st_wait_async): New function.
* io/unit.c (insert_unit): Use macros LOCK, UNLOCK and TRYLOCK;
add NOTE where necessary.
(get_gfc_unit): Likewise.
(init_units): Likewise.
(close_unit_1): Likewise. Call async_close if asynchronous.
(close_unit): Use macros LOCK and UNLOCK.
(finish_last_advance_record): Likewise.
(newunit_alloc): Likewise.
* io/unix.c (find_file): Likewise.
(flush_all_units_1): Likewise.
(flush_all_units): Likewise.
* libgfortran.h (generate_error_common): Add prototype.
* runtime/error.c: Include io.h and async.h.
(generate_error_common): New function.
2018-08-21 Nicolas Koenig <koenigni@gcc.gnu.org>
Thomas Koenig <tkoenig@gcc.gnu.org>
PR fortran/25829
* testsuite/libgomp.fortran/async_io_1.f90: New test.
* testsuite/libgomp.fortran/async_io_2.f90: New test.
* testsuite/libgomp.fortran/async_io_3.f90: New test.
* testsuite/libgomp.fortran/async_io_4.f90: New test.
* testsuite/libgomp.fortran/async_io_5.f90: New test.
* testsuite/libgomp.fortran/async_io_6.f90: New test.
* testsuite/libgomp.fortran/async_io_7.f90: New test.
Co-Authored-By: Thomas Koenig <tkoenig@gcc.gnu.org>
From-SVN: r263750
The getentropy function, found on Linux, OpenBSD, and recently also
FreeBSD, can be used to get random bytes to initialize the PRNG. It
is similar to the traditional way of reading from /dev/urandom, but
being a system call rather than a special file, it doesn't suffer from
problems like running out of file descriptors, or failure when running
in a container where /dev/urandom may not be available.
Regtested on x86_64-pc-linux-gnu, Ok for trunk?
2018-08-13 Janne Blomqvist <jb@gcc.gnu.org>
* configure.ac: Check for getentropy.
* intrinsics/random.c (getosrandom): Use getentropy if available.
* config.h.in: Regenerated.
* configure: Regenerated.
From-SVN: r263522
2018-07-31 Andre Vieira <andre.simoesdiasvieira@arm.com>
Revert 'AsyncI/O patch committed'
2018-07-25 Nicolas Koenig <koenigni@gcc.gnu.org>
Thomas Koenig <tkoenig@gcc.gnu.org>
PR fortran/25829
* gfortran.texi: Add description of asynchronous I/O.
* trans-decl.c (gfc_finish_var_decl): Treat asynchronous variables
as volatile.
* trans-io.c (gfc_build_io_library_fndecls): Rename st_wait to
st_wait_async and change argument spec from ".X" to ".w".
(gfc_trans_wait): Pass ID argument via reference.
2018-07-31 Andre Vieira <andre.simoesdiasvieira@arm.com>
Revert 'AsyncI/O patch committed'
2018-07-25 Nicolas Koenig <koenigni@gcc.gnu.org>
Thomas Koenig <tkoenig@gcc.gnu.org>
PR fortran/25829
* gfortran.dg/f2003_inquire_1.f03: Add write statement.
* gfortran.dg/f2003_io_1.f03: Add wait statement.
2018-07-31 Andre Vieira <andre.simoesdiasvieira@arm.com>
Revert 'AsyncI/O patch committed'
2018-07-25 Nicolas Koenig <koenigni@gcc.gnu.org>
Thomas Koenig <tkoenig@gcc.gnu.org>
PR fortran/25829
* Makefile.am: Add async.c to gfor_io_src.
Add async.h to gfor_io_headers.
* Makefile.in: Regenerated.
* gfortran.map: Add _gfortran_st_wait_async.
* io/async.c: New file.
* io/async.h: New file.
* io/close.c: Include async.h.
(st_close): Call async_wait for an asynchronous unit.
* io/file_pos.c (st_backspace): Likewise.
(st_endfile): Likewise.
(st_rewind): Likewise.
(st_flush): Likewise.
* io/inquire.c: Add handling for asynchronous PENDING
and ID arguments.
* io/io.h (st_parameter_dt): Add async bit.
(st_parameter_wait): Correct.
(gfc_unit): Add au pointer.
(st_wait_async): Add prototype.
(transfer_array_inner): Likewise.
(st_write_done_worker): Likewise.
* io/open.c: Include async.h.
(new_unit): Initialize asynchronous unit.
* io/transfer.c (async_opt): New struct.
(wrap_scalar_transfer): New function.
(transfer_integer): Call wrap_scalar_transfer to do the work.
(transfer_real): Likewise.
(transfer_real_write): Likewise.
(transfer_character): Likewise.
(transfer_character_wide): Likewise.
(transfer_complex): Likewise.
(transfer_array_inner): New function.
(transfer_array): Call transfer_array_inner.
(transfer_derived): Call wrap_scalar_transfer.
(data_transfer_init): Check for asynchronous I/O.
Perform a wait operation on any pending asynchronous I/O
if the data transfer is synchronous. Copy PDT and enqueue
thread for data transfer.
(st_read_done_worker): New function.
(st_read_done): Enqueue transfer or call st_read_done_worker.
(st_write_done_worker): New function.
(st_write_done): Enqueue transfer or call st_read_done_worker.
(st_wait): Document as no-op for compatibility reasons.
(st_wait_async): New function.
* io/unit.c (insert_unit): Use macros LOCK, UNLOCK and TRYLOCK;
add NOTE where necessary.
(get_gfc_unit): Likewise.
(init_units): Likewise.
(close_unit_1): Likewise. Call async_close if asynchronous.
(close_unit): Use macros LOCK and UNLOCK.
(finish_last_advance_record): Likewise.
(newunit_alloc): Likewise.
* io/unix.c (find_file): Likewise.
(flush_all_units_1): Likewise.
(flush_all_units): Likewise.
* libgfortran.h (generate_error_common): Add prototype.
* runtime/error.c: Include io.h and async.h.
(generate_error_common): New function.
2018-07-31 Andre Vieira <andre.simoesdiasvieira@arm.com>
Revert 'AsyncI/O patch committed'.
2018-07-25 Nicolas Koenig <koenigni@gcc.gnu.org>
Thomas Koenig <tkoenig@gcc.gnu.org>
PR fortran/25829
* testsuite/libgomp.fortran/async_io_1.f90: New test.
* testsuite/libgomp.fortran/async_io_2.f90: New test.
* testsuite/libgomp.fortran/async_io_3.f90: New test.
* testsuite/libgomp.fortran/async_io_4.f90: New test.
* testsuite/libgomp.fortran/async_io_5.f90: New test.
* testsuite/libgomp.fortran/async_io_6.f90: New test.
* testsuite/libgomp.fortran/async_io_7.f90: New test.
From-SVN: r263082
2018-07-25 Nicolas Koenig <koenigni@gcc.gnu.org>
Thomas Koenig <tkoenig@gcc.gnu.org>
PR fortran/25829
* gfortran.texi: Add description of asynchronous I/O.
* trans-decl.c (gfc_finish_var_decl): Treat asynchronous variables
as volatile.
* trans-io.c (gfc_build_io_library_fndecls): Rename st_wait to
st_wait_async and change argument spec from ".X" to ".w".
(gfc_trans_wait): Pass ID argument via reference.
2018-07-25 Nicolas Koenig <koenigni@gcc.gnu.org>
Thomas Koenig <tkoenig@gcc.gnu.org>
PR fortran/25829
* gfortran.dg/f2003_inquire_1.f03: Add write statement.
* gfortran.dg/f2003_io_1.f03: Add wait statement.
2018-07-25 Nicolas Koenig <koenigni@gcc.gnu.org>
Thomas Koenig <tkoenig@gcc.gnu.org>
PR fortran/25829
* Makefile.am: Add async.c to gfor_io_src.
Add async.h to gfor_io_headers.
* Makefile.in: Regenerated.
* gfortran.map: Add _gfortran_st_wait_async.
* io/async.c: New file.
* io/async.h: New file.
* io/close.c: Include async.h.
(st_close): Call async_wait for an asynchronous unit.
* io/file_pos.c (st_backspace): Likewise.
(st_endfile): Likewise.
(st_rewind): Likewise.
(st_flush): Likewise.
* io/inquire.c: Add handling for asynchronous PENDING
and ID arguments.
* io/io.h (st_parameter_dt): Add async bit.
(st_parameter_wait): Correct.
(gfc_unit): Add au pointer.
(st_wait_async): Add prototype.
(transfer_array_inner): Likewise.
(st_write_done_worker): Likewise.
* io/open.c: Include async.h.
(new_unit): Initialize asynchronous unit.
* io/transfer.c (async_opt): New struct.
(wrap_scalar_transfer): New function.
(transfer_integer): Call wrap_scalar_transfer to do the work.
(transfer_real): Likewise.
(transfer_real_write): Likewise.
(transfer_character): Likewise.
(transfer_character_wide): Likewise.
(transfer_complex): Likewise.
(transfer_array_inner): New function.
(transfer_array): Call transfer_array_inner.
(transfer_derived): Call wrap_scalar_transfer.
(data_transfer_init): Check for asynchronous I/O.
Perform a wait operation on any pending asynchronous I/O
if the data transfer is synchronous. Copy PDT and enqueue
thread for data transfer.
(st_read_done_worker): New function.
(st_read_done): Enqueue transfer or call st_read_done_worker.
(st_write_done_worker): New function.
(st_write_done): Enqueue transfer or call st_read_done_worker.
(st_wait): Document as no-op for compatibility reasons.
(st_wait_async): New function.
* io/unit.c (insert_unit): Use macros LOCK, UNLOCK and TRYLOCK;
add NOTE where necessary.
(get_gfc_unit): Likewise.
(init_units): Likewise.
(close_unit_1): Likewise. Call async_close if asynchronous.
(close_unit): Use macros LOCK and UNLOCK.
(finish_last_advance_record): Likewise.
(newunit_alloc): Likewise.
* io/unix.c (find_file): Likewise.
(flush_all_units_1): Likewise.
(flush_all_units): Likewise.
* libgfortran.h (generate_error_common): Add prototype.
* runtime/error.c: Include io.h and async.h.
(generate_error_common): New function.
2018-07-25 Nicolas Koenig <koenigni@gcc.gnu.org>
Thomas Koenig <tkoenig@gcc.gnu.org>
PR fortran/25829
* testsuite/libgomp.fortran/async_io_1.f90: New test.
* testsuite/libgomp.fortran/async_io_2.f90: New test.
* testsuite/libgomp.fortran/async_io_3.f90: New test.
* testsuite/libgomp.fortran/async_io_4.f90: New test.
* testsuite/libgomp.fortran/async_io_5.f90: New test.
* testsuite/libgomp.fortran/async_io_6.f90: New test.
* testsuite/libgomp.fortran/async_io_7.f90: New test.
Co-Authored-By: Thomas Koenig <tkoenig@gcc.gnu.org>
From-SVN: r262978
2018-06-01 Steven G. Kargl <kargl@gcc.gnu.org>
PR fortran/63570
* check.c (gfc_check_random_init): New function. Check arguments of
RANDOM_INIT.
* gfortran.h (GFC_ISYM_RANDOM_INIT): New enum token.
* intrinsic.c (add_subroutines): Add RANDOM_INIT to list of
subroutines.
(gfc_check_intrinsic_standard): Introduce Fortran 2018 check.
* intrinsic.h: Add prototypes for gfc_check_random_init and
gfc_resolve_random_init
* intrinsic.texi: Document new intrinsic subprogram.
* iresolve.c (gfc_resolve_random_init): Resolve routine name.
* trans-decl.c: Declare gfor_fndecl_random_init
* trans-intrinsic.c (conv_intrinsic_random_init): New function.
Translate call to RANDOM_INIT.
(gfc_conv_intrinsic_subroutine): Call it.
* trans.h: Declare gfor_fndecl_random_init
2018-06-01 Steven G. Kargl <kargl@gcc.gnu.org>
PR fortran/63570
* gfortran.dg/random_init_1.f90: New test.
* gfortran.dg/random_init_2.f90: New test.
* gfortran.dg/random_init_3.f90: New test.
* gfortran.dg/random_init_4.f90: New test.
* gfortran.dg/random_init_5.f90: New test.
* gfortran.dg/random_init_6.f90: New test.
2018-06-01 Steven G. Kargl <kargl@gcc.gnu.org>
PR fortran/63570
* libgfortran/Makefile.am: Add random_init.f90 to build.
* libgfortran/Makefile.in: Regenerated.
* libgfortran/gfortran.map: Expose symbol for _gfortran_random_init.
* libgfortran/intrinsics/random_init.f90: Implementation.
From-SVN: r261075
2018-05-28 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/85840
* io/write.c (write_real, write_real_g0, write_complex): Use
separate local variables for the float string length.
From-SVN: r260851
2018-05-26 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/89506
* io/write.c (write_integer): Initialise the fnode format to
FMT_NONE, used for list directed write.
(BUF_STACK_SZ): Bump default buffer size up to avoid allocs on
small stuff.
From-SVN: r260795
2018-05-26 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/85840
* io/write.c (write_float_0): Use separate local variable for
the float string length.
From-SVN: r260793
* config/cet.m4 (GCC_CET_FLAGS): Default to --disable-cet, replace
--enable-cet=default with --enable-cet=auto.
* doc/install.texi: Document --disable-cet being the default and
--enable-cet=auto.
* configure: Regenerated.
From-SVN: r259487
PR jit/85384
* acx.m4 (GCC_BASE_VER): Remove \$\$ from sed expression.
* configure.ac (gcc-driver-name.h): Honor --with-gcc-major-version
by using gcc_base_ver to generate a gcc_driver_version, and use
it when generating GCC_DRIVER_NAME.
* configure: Regenerate.
* configure: Regenerate.
From-SVN: r259462
2018-04-04 Thomas Koenig <tkoenig@gcc.gnu.org>
PR libfortran/85166
* runtime/minimal.c (stop_numeric): Add new function in order to
implement numeric stop on minimal targets.
From-SVN: r259072
Fortran 2018 adds a new QUIET specifier for the STOP and ERROR STOP
statements, in order to suppress the printing of signaling FP
exceptions and the stop code. This patch adds the necessary library
changes, but for now the new specifier is not parsed and the frontend
unconditionally adds a false value for the new argument.
Regtested on x86_64-pc-linux-gnu.
gcc/fortran/ChangeLog:
2018-02-23 Janne Blomqvist <jb@gcc.gnu.org>
PR fortran/84519
* trans-decl.c (gfc_build_builtin_function_decls): Add bool
argument to stop and error stop decls.
* trans-stmt.c (gfc_trans_stop): Add false value to argument
lists.
libgfortran/ChangeLog:
2018-02-23 Janne Blomqvist <jb@gcc.gnu.org>
PR fortran/84519
* caf/libcaf.h (_gfortran_caf_stop_numeric): Add bool argument.
(_gfortran_caf_stop_str): Likewise.
(_gfortran_caf_error_stop_str): Likewise.
(_gfortran_caf_error_stop): Likewise.
* caf/mpi.c (_gfortran_caf_error_stop_str): Handle new argument.
(_gfortran_caf_error_stop): Likewise.
* caf/single.c (_gfortran_caf_stop_numeric): Likewise.
(_gfortran_caf_stop_str): Likewise.
(_gfortran_caf_error_stop_str): Likewise.
(_gfortran_caf_error_stop): Likewise.
(_gfortran_caf_lock): Likewise.
(_gfortran_caf_unlock): Likewise.
* libgfortran.h (stop_string): Add bool argument.
* runtime/pause.c (do_pause): Add false argument.
* runtime/stop.c (stop_numeric): Handle new argument.
(stop_string): Likewise.
(error_stop_string): Likewise.
(error_stop_numeric): Likewise.
From-SVN: r257928
This patch changes the libgfortran API for the PAUSE statement. By
passing a GFC_INTEGER_8 it handles -fdefault-integer-8, and for the
character version passing the length as a size_t.
Regtested on x86_64-pc-linux-gnu, committed as obvious.
gcc/fortran/ChangeLog:
2018-02-22 Janne Blomqvist <jb@gcc.gnu.org>
PR 78534
PR 84509
* trans-decl.c (gfc_build_builtin_function_decls): Pass
gfc_int8_type node to pause_numeric, size_type_node to
pause_string.
* trans-stmt.c (gfc_trans_pause): Likewise.
libgfortran/ChangeLog:
2018-02-22 Janne Blomqvist <jb@gcc.gnu.org>
PR 78534
PR 84509
* runtime/pause.c (pause_numeric): Modify to take GFC_INTEGER_8
argument.
(pause_string): Modify to take size_t character length argument.
From-SVN: r257903
