No real change, but for consistency reset all multilib related variables.
* config/arm/t-linux-eabi (MULTILIB_EXCEPTIONS): Set to empty.
(MULTILIB_RESUE): Likewise.
(MULTILIB_MATCHES): Likewise.
(MULTLIB_REQUIRED): Likewise.
From-SVN: r249302
[This patch has only been fairly lightly tested (I've built a compiler
with all the relevant multilibs and smoke-tested a few combinations to
check that the tools still produce a sensible object file).]
This patch updates the RTEMS build to use the new option framework.
It tries as far as possible to keep the existing supported options,
but there are two necessary changes and one cleanup. I've also
restructed the file slightly to make it slightly easier (IMO) to
understand.
Necessary changes:
1: ARMv4t does not support a hard-float ABI, the earliest supported
architecture with floating-point support is ARMv5te, so I've rebased
the original fpu/hard libraries to that revision of the architecture.
2: Similarly, the earliest version of the -m profile to support
hardware floating-point is armv7e-m (not armv7-m), so the base
architecture for m-profile with FP has been correspondingly updated.
Clean-up:
1: For greater consistency I've changed the
-mcpu=cortex-m7/-mfpu=fpv5-d16/-mhard-float to
-march=armv7e-m+fp.dp/-mhard-float. The built-in -mcpu rewrite rules
take care of mapping the existing option sets onto the architecture
string to ensure compatibility.
Since the existing rule set does not contain any MULTILIB_REUSE rules,
I have not added any here this time around, but it would be worth the
maintainers of this file considering whether adding some rules would
make their toolchain more friendly to users.
Finally, I've added lines to reset all the multilib variables at the
head of the file. I found during testing that some definitions from
t-arm-elf were leaking through and causing unexpected behviour.
* config/arm/t-rtems: Rewrite for new option framework.
From-SVN: r249301
This is the R- & M-profile equivalent of the previous A-profile
multilib rewrite. Additionally this patch adds some top-level rules
to help find suitable multilibs for general cases when certain
libraries are not built, or when building for legacy cores.
gcc:
* config/arm/t-aprofile (v7_a_nosimd_variants, v7_a_simd_variants)
(v7ve_nosimd_variatns, v7ve_vfpv3_simd_variants)
(v7ve_vfpv4_simd_variants, v8_a_nosimd_variants, v8_a_simd_variants)
(v8_1_a_simd_variants, v8_2_a_simd_variants): Move to ...
* config/arm/t-multilib: ... here.
(MULTILIB_OPTIONS): Add armv7 and armv7+fp architectures.
(MULTILIB_MATCHES): Use armv7 libraries for armv7-r. Also use for
armv7-a and armv8*-a when A-profile libraries have not been built.
* config/arm/t-rmprofile: Rewrite.
gcc/testsuite:
* gcc.target/arm/multilib.exp (rmprofile): New tests when rm-profile
multilibs have been built.
From-SVN: r249300
Some tests explicitly test with -march=armv7-a and -mfloat-abi=hard.
However, with the new -mfpu=auto code, this architectural specifiction
lacks any floating-point capabilities. To rectify this, change the
architecture to armv7-a+fp.
gcc/testsuite:
* gcc.dg/pr59418.c: On ARM, change architecture to armv7-a+fp.
* gcc.target/arm/pr51915.c: Likewise.
* gcc.target/arm/pr52006.c: Likewise.
* gcc.target/arm/pr53187.c: Likewise.
From-SVN: r249299
The MULTILIB_REUSE mapping rules are built up using periods to
represent the placement of '=' signs in the command line syntax. This
presents a problem if the option contains an explicit period because
that is translated unconditionally. The result is that it is not
currently possible to write a reuse rule that would match the
ARMv8-M mainline architecture:
-march=armv8-m.main
To fix this, this patch allows an explicit period to be escaped by writing
\. and by then preserving the period into the generated multilib header.
* genmultilib (multilib_reuse): Allow an explicit period to be escaped
with a backslash. Remove the backslash after substituting unescaped
periods.
* doc/fragments.texi (MULTILIB_REUSE): Document it.
From-SVN: r249298
This file is missing a .fpu directive and was relying on the compiler
driver passing through a -mfpu= command line option. When the FPU is
auto, that will not be passed through correctly, so set something
suitable within the file itself.
libgcc:
* config/arm/cmse_nonsecure_call.S: Explicitly set the FPU.
From-SVN: r249297
Now that the default FPU is 'auto' we can finally rewrite (and
simplify) the rules for mapping compiler options to multilibs. We
no-longer need to know the specific CPU, since the driver will
construct a suitable -march flag for us; this greatly simplifies the
overall logic. This patch rewrites the library list for A-profile
cores. We use various Make extention rules to simplify the logic even
further.
A couple of minor tweaks to the configure script and to the main
driver ensures that we always know the setting of -mfloat-abi and
-marm/-mthumb. Again, this helps simplify the logic further. The
change to arm_target_thumb_only relies on the fact that this routine
is only called if neither -marm nor -mthumb has been previously
selected or specified by the user.
A new testsuite module is added to check the libraries generated. The
new tests are only run if the compiler is configured with the relevant
multilibs enabled.
gcc:
* config.gcc: (arm*-*-*): When building a-profile libraries, force
the driver to pass through the default setting of -mfloat-abi.
* common/config/arm/arm-common.c (arm_target_thumb_only): Return -marm
rather than NULL.
* config/arm/t-multilib (MULTILIB_REUSE): Initialize to empty.
(all_feat_combs): New rule.
(MULTILIB_OPTIONS): Use explicit ARM and Thumb directories. Rework
default libraries.
* config/arm/t-aprofile: Rewrite.
gcc/testsuite:
* gcc.target/arm/multilibs.exp: New file.
From-SVN: r249296
Finally, we can make 'auto' the default choice for the FPU option. It's
still possible to override this during configure, but we will eventually
deprecate that, moving to the new cpu/architecture selection mechanism.
* config/arm/arm.h (FPUTYPE_AUTO): Define.
* config/arm/arm.c (arm_option_override): Use FPUTYPE_AUTO if the
fpu is not specified by the user/command-line.
* config/arm/bpabi.h (FPUTYPE_DEFAULT): Delete.
* config/arm/netbsd-elf.h (FPUTYPE_DEFAULT): Delete.
* config/arm/linux-elf.h (FPUTYPE_DEFAULT): Delete.
* config/arm/vxworks.h (FPUTYPE_DEFAULT): Delete.
* common/config/arm/arm-common.c (arm_canon_arch_option): Use
FPUTYPE_AUTO insted of FPUTYPE_DEFAULT.
From-SVN: r249295
The standard arm-eabi configuration comes with a basic set of multilibs that
are suitable mostly for simple testing of the compiler in various
configurations. We try to keep the number of libraries build small so
that build times do not become too onerous.
Using the new auto-fp selection code we can now cover all supported
architectures except for those with single-precision only FP units with
just 4 multilibs. This is done with the rewrite of t-arm-elf. Now that we
canonicalize -mcpu into suitable -march definitions we don't need to match
CPU names to architectures any more; the driver will do this for us.
I also noticed whilst writing this patch that the existing MULTILIB_DEFAULTS
setting in the compiler was causing more problems than it was worth; and
furthermore was simply wrong if the compiler is ever configured with
--with-mode, --with-float or --with-endian. The remaining options also
pertained to pre-eabi builds and aren't interesting today either. It
seemed best to just delete the definition entirely.
* config/arm/elf.h (MULTILIB_DEFAULTS): Delete.
* config/arm/t-arm-elf: Rewritten.
From-SVN: r249294
Before this patch series it wasn't really possible to not have an FPU;
it was always there, even if the hardware didn't really support it.
Now that we have -mfpu=auto, the concept of not having an FPU becomes
real. Consequently, when the -mfloat-abi switch is set to softfp
doing the Right Thing is much more important. In this case we have a
soft-float ABI, but can use FP instructions if they are available.
To support this we have to separate out TARGET_HARD_FLOAT into two
use cases: one where the instructions exist and one when they don't.
We preserve the original meaning of TARGET_HARD_FLOAT (but add an extra
check) of meaning that we are generating HW FP instructions, and add a
new macro for the special case when use of FP instructions is permitted,
but might not be available at this time (the distinction is important
because they might be enabled by an attribute during the compilation).
TARGET_SOFT_FLOAT continues to be the exact inverse of TARGET_HARD_FLOAT,
but we now define it as such.
* config/arm/arm.h (TARGET_HARD_FLOAT): Also check that we
have some floating-point instructions.
(TARGET_SOFT_FLOAT): Define as inverse of TARGET_HARD_FLOAT.
(TARGET_MAYBE_HARD_FLOAT): New macro.
* config/arm/arm-builtins.c (arm_init_builtins): Use
TARGET_MAYBE_HARD_FLOAT.
* config/arm/arm.c (arm_option_override): Use TARGET_HARD_FLOAT_ABI.
From-SVN: r249293
This patch uses the driver and some spec rewrite rules to generate a
canonicalized form of the -march= option. We want to do this for
several reasons, all relating to making multi-lib selection sane.
1) It can remove redundant extension options to produce a minimal
list.
2) The general syntax of the option permits a plethora of features,
these are permitted in any order. Canonicalization ensures that there
is a single ordering of the options that are needed.
3) It can use additional options to remove extensions that aren't
relevant, such as removing all features that relate to the FPU when
use of that is disabled.
Once we have this information in a sensible form the multilib rules
can be vastly simplified making for much more understandable Makefile
fragments.
* common/config/arm/arm-common.c: Define INCLUDE_LIST.
(configargs.h): Include it.
(arm_print_hint_for_fpu_option): New function.
(arm_parse_fpu_option): New function.
(candidate_extension): New class.
(arm_canon_for_multilib): New function.
* config/arm/arm.h (CANON_ARCH_SPEC_FUNCTION): New macro.
(EXTRA_SPEC_FUNCTIONS): Add CANON_ARCH_SPEC_FUNCTION.
(ARCH_CANONICAL_SPECS): New macro.
(DRIVER_SELF_SPECS): Add ARCH_CANONICAL_SPECS.
From-SVN: r249292
Currently if the user does not specify a default CPU or architecture
the compiler provieds no default values in the spec defaults. We can
try to work from TARGET_CPU_DEFAULT but pulling that into the driver
is a bit crufty and doesn't really work well with the general
spec-processing model. A better way is to ensure that with_cpu is
always set appropirately during configure. To avoid problems with the
multilib fragment processing we defer this until after we have
processed any required fragments before selecting the default.
* config.gcc (arm*-*-*): Ensure both target_cpu_cname and with_cpu
are set after handling multilib fragments. Set target_cpu_default2
from with_cpu.
From-SVN: r249291
This patch extends support for the new extended-style architecture
strings to configure and the target default options. We validate any
options passed by the user to configure against the permitted
extensions for that CPU or architecture.
* config.gcc (arm*-*-fucshia*): Set target_cpu_cname to the real
cpu name.
(arm*-*-*): Set target_cpu_default2 to a quoted string.
* config/arm/parsecpu.awk (check_cpu): Validate any extension
options.
(check_arch): Likewise.
* config/arm/arm.c (arm_configure_build_target): Handle
TARGET_CPU_DEFAULT being a string constant. Scan any feature
options in the default.
From-SVN: r249290
A follow up patch to this one will start to canonicalize options to
simplify generating multilib fragments. This patch is enabling work
for that. If we have extension options that duplicate other options
(done principally for back-wards compatibility purposes) we need to
ensure that just one of them will be used consistently when generating
a canonical form of the user-specified options. We do this by
explicitly noting when an option is defined as an alias of another.
Another aspect of canonicalization is to enforce a strict order in
which the options are inspected, we do this by ensuring that no later
option examined can be a subset of an earlier option (add and remove
options are treated separtely).
It's practically impossible to check all this in parsecpu.awk since
that premits use of C macros in the ISA features list, so instead we
enforce the ordering with a selftest function in the compiler, which
is only run when self tests are enabled (it's not something that will
change every day, so this should be sufficient).
* config/arm/arm-protos.h (cpu_arch_extension): Add field to record
when an option is an alias of another.
* config/arm/parsecpu.awk (optalias): New parser token.
(gen_comm_data): Mark non-alias options as such. Emit entries
for extension aliases.
* config/arm/arm-cpus.in (armv5e): Make vfpv2 an alias.
(armv5te, armv5tej, armv6, armv6j, armv6k, armv6z): Likewise.
(armv6kz, armv6zk, armv6t2): Likewise.
(armv7): Make vfpv3-d16 an alias.
(armv7-a): Make vfpv3-d16, neon and neon-vfpv3 aliases. Sort in
canonical order.
(armv7ve): Make vfpv4-d16, neon-vfpv3 and neon-vfpv4 aliases.
Sort in canonical order.
(armv8-a): Sort in canonical order.
(armv8.1-a, armv8.2-a): Likewise.
(generic-armv7-a): Make neon and neon-vfpv3 aliases. Sort in
canonical order.
(cortex-a9): Sort in canonical order.
* config/arm/arm.c (selftests.h): Include it.
(arm_test_cpu_arch_data): New function.
(arm_run_self_tests): New function.
(TARGET_RUN_TARGET_SELFTESTS): Redefine.
(targetm): Move declaration to the end of the file.
* arm-cpu-cdata.h: Regenerated.
From-SVN: r249289
Now that the standard CPU and architecture option parsing code is
available in the driver we can use the main CPU and architecture data
tables for driving the automatic enabling of Thumb code.
Doing this requires that the driver script tell the parser whether or
not the target string is a CPU name or an architecture, but beyond
that it is just standard use of the new capabilities.
We do, however, now get some error checking if the target isn't
recognized, when previously we just ignored unknown targets and hoped
that a later pass would pick up on this.
* config/arm/arm.h (TARGET_MODE_SPECS): Add additional parameter to
call to target_mode_check describing the type of option passed.
* common/config/arm/arm-common.c (arm_arch_core_flag): Delete.
(arm_target_thumb_only): Use arm_parse_arch_option_name or
arm_parse_cpu_option_name to match parameters against list of
available targets.
* config/arm/parsecpu.awk (gen_comm_data): Don't generate
arm_arch_core_flags data structure.
* config/arm/arm-cpu_cdata.h: Regenerated.
From-SVN: r249288
This patch has no functional change. The code used for parsing -mcpu,
-mtune and -march options is simply moved from arm.c arm-common.c.
The list of FPU options is also moved. Subsequent patches will make
use of this within the driver.
Some small adjustments are needed as a consequence of moving the
definitions of the data objects to another object file, in that we
no-longer have direct access to the size of the object.
* common/config/arm/arm-common.c (arm_initialize_isa): Moved here from
config/arm/arm.c.
(arm_print_hint_for_cpu_option): Likewise.
(arm_print_hint_for_arch_option): Likewise.
(arm_parse_cpu_option_name): Likewise.
(arm_parse_arch_option_name): Likewise.
* config/arm/arm.c (arm_identify_fpu_from_isa): Use the computed number
of entries in the all_fpus list.
* config/arm/arm-protos.h (all_architectures, all_cores): Declare.
(arm_parse_cpu_option_name): Declare.
(arm_parse_arch_option_name): Declare.
(arm_parse_option_features): Declare.
(arm_intialize_isa): Declare.
* config/arm/parsecpu.awk (gen_data): Move CPU and architecture
data tables to ...
(gen_comm_data): ... here. Make definitions non-static.
* config/arm/arm-cpu-data.h: Regenerated.
* config/arm/arm-cpu-cdata.h: Regenerated.
From-SVN: r249287
The driver really needs to handle some canonicalization of the new
-mcpu and -march options in order to make multilib selection
tractable. This will require moving much of the logic to parse the
new options into the common code file. However, the tuning data
definitely does not want to be there as it is very specific to the
compiler passes. To facilitate this we need to split up the generated
configuration data into architectural and tuning related tables.
This patch starts that process, but does not yet move any code out of
the compiler backend. Since I'm reworking all that code I took the
opportunity to also separate out the CPU data tables from the
architecture data tables. Although they are related, there is a lot
of redundancy in the CPU options that is best handled by simply
indirecting to the architecture entry.
* config/arm/arm-protos.h (arm_build_target): Remove arch_core.
(cpu_arch_extension): New structure.
(cpu_arch_option, arch_option, cpu_option): New structures.
* config/arm/parsecpu.awk (gen_headers): Build an enumeration of
architecture types.
(gen_data): Generate new format data tables.
* config/arm/arm.c (cpu_tune): New structure.
(cpu_option, processors): Delete.
(arm_print_hint_for_core_or_arch): Delete. Replace with ...
(arm_print_hint_for_cpu_option): ... this and ...
(arm_print_hint_for_arch_option): ... this.
(arm_parse_arch_cpu_name): Delete. Replace with ...
(arm_parse_cpu_option_name): ... this and ...
(arm_parse_arch_option_name): ... this.
(arm_unrecognized_feature): Change type of target parameter to
cpu_arch_option.
(arm_parse_arch_cpu_features): Delete. Replace with ...
(arm_parse_option_features): ... this.
(arm_configure_build_target): Rework to use new configuration data
tables.
(arm_print_tune_info): Rework for new configuration data tables.
* config/arm/arm-cpu-data.h: Regenerated.
* config/arm/arm-cpu.h: Regenerated.
From-SVN: r249286
The ARM option parsing code uses sbitmap data structures to manage
features and upcoming patches will shortly need to use these bitmaps
within the driver. This patch moves sbitmap.o from OBJS to
OBJS-libcommon to facilitate this.
The patch has no impact on targets that don't need this functionality,
since the object is part of an archive and will only be extracted if
needed.
* Makefile.in (OBJS): Move sbitmap.o from here ...
(OBJS-libcommon): ... to here.
From-SVN: r249285
This patch adds the default CPUs for each cpu and provides options for
changing the FPU variant when appropriate.
It turns out to be easier to describe removal options using general
mask operations that disable a concept rather than specific bits.
Sometimes the helper definitions for enabling a feature are not excat
duals when it comes to disabling them - for example, +simd forcibly
turns on double-precision capabilities in the FPU, but disabling just
simd (+nosimd) should not forcibly disable that.
* config/arm/arm-isa.h (ISA_ALL_FPU_INTERNAL): Renamed from ISA_ALL_FPU.
(ISA_ALL_CRYPTO): New macro.
(ISA_ALL_SIMD): New macro
(ISA_ALL_FP): New macro.
* config/arm/arm.c (fpu_bitlist): Update initializer.
* config/arm/arm-cpus.in: Use new ISA_ALL macros to disable crypto,
simd or fp.
(arm9e): Add fpu. Add option for nofp
(arm946e-s, arm966e-s, arm968e-s, arm10e, arm1020e, arm1022e): Likewise.
(arm926ej-s, arm1026ej-s): Likewise.
(generic-armv7-a): Add fpu. Add options for simd, vfpv3, vfpv3-d16,
vfpv3-fp16, vfpv3-d16-fp16, vfpv4, vfpv4-d16, neon, neon-vfp3,
neon-fp16, neon-vfpv4, nofp and nosimd.
(cortex-a5, cortex-a7): Add fpu. Add options for nosimd and nofp.
(cortex-a8): Add fpu. Add option for nofp.
(cortex-a9): Add fpu. Add options for nosimd and nofp.
(cortex-a12, cortex-a15, cortex-a17): Add fpu. Add option for nofp.
(cortex-r4f): Add fpu.
(cortex-r5): Add fpu. Add options for nofp.dp and nofp.
(cortex-r7): Use idiv option from architecture. Add fpu. Add option
for nofp.
(cortex-r8): Likewise.
(cortex-m4): Add fpu. Add option for nofp.
(cortex-a15.cortex-a7): Add fpu. Add option for nofp.
(cortex-a17.cortex-a7): Likewise.
(cortex-a32): Add fpu. Add options for crypto and nofp.
(cortex-a35, cortex-a53): Likewise.
(cortex-a57): Add fpu. Add option for crypto.
(cortex-a72, cortex-a73): Likewise.
(exynos-m1): Likewise.
(cortex-a57.cortex-a53, cortex-a72.cortex-a53): Likewise.
(cortex-a73.cortex-a35, cortex-a73.cortex-a53): Likewise.
(cortex-m33): Add fpu. Add option for nofp.
* config/arm/arm-cpu-cdata.h: Regenerated
* config/arm/arm-cpu-data.h: Regenerated.
From-SVN: r249284
This patch adds the currently supported architecture options to the
individual architectures. For floating point and SIMD we only permit
variants that the relevant versions of the architecture permit. We also
add short-hand versions (+fp, +simd, etc) that allows the user to
describe using floating point without having to know the precise version
of the floating point sub-architecture that that architecture requires.
In a small number of cases we need to provide more precise versions of the
floating point architecture. In those cases we permit traditional -mfpu
style names in the architecture description.
* arm-cpus.in (armv5e): Add options fp, vfpv2 and nofp.
(armv5te, armv5tej): Likewise.
(armv6, armv6j, armv6k, armv6z, armv6kz, armv6zk, armv6t2): Likewise.
(armv7): Add options fp and vfpv3-d16.
(armv7-a): Add options fp, simd, vfpv3, vfpv3-d16, vfpv3-d16-fp16,
vfpv3-fp16, vfpv4, vfpv4-d16, neon, neon-vfpv3, neon-fp16, neon-vfpv4,
nofp and nosimd.
(armv7ve): Likewise.
(armv7-r): Add options fp, fp.sp, idiv, nofp and noidiv.
(armv7e-m): Add options fp, fpv5, fp.dp and nofp.
(armv8-a): Add nocrypto option.
(armv8.1-a, armv8.2-a): Likewise.
(armv8-m.main): add options fp, fp.dp and nofp.
From-SVN: r249283
This is the main patch to provide the infrastructure for adding
feature extensions to CPU and architecture specifications. It does not,
however, add all the extensions that we intend to support (just a small
number to permit some basic testing). Now, instead of having specific
entries in the architecture table for variants such as armv8-a+crc, the
crc extension is specified as an optional component of the armv8-a
architecture entry. Similar control can be added to CPU option names.
In both cases the list of permitted options is controlled by the main
architecture or CPU name to prevent arbitrary cross-products of options.
* config/arm/arm-cpus.in (armv8-a): Add options crc, simd crypto and
nofp.
(armv8-a+crc): Delete.
(armv8.1-a): Add options simd, crypto and nofp.
(armv8.2-a): Add options fp16, simd, crypto and nofp.
(armv8.2-a+fp16): Delete.
(armv8-m.main): Add option dsp.
(armv8-m.main+dsp): Delete.
(cortex-a8): Add fpu. Add nofp option.
(cortex-a9): Add fpu. Add nofp and nosimd options.
* config/arm/parsecpu.awk (gen_data): Generate option tables and
link to main cpu and architecture data structures.
(gen_comm_data): Only put isa attributes from the main architecture
in common tables.
(option): New statement for architecture and CPU entries.
* arm.c (struct cpu_option): New structure.
(struct processors): Add entry for options.
(arm_unrecognized_feature): New function.
(arm_parse_arch_cpu_name): Ignore any characters after the first
'+' character.
(arm_parse_arch_cpu_feature): New function.
(arm_configure_build_target): Separate out any CPU and architecture
features and parse separately. Don't error out if -mfpu=auto is
used with only an architecture string.
(arm_print_asm_arch_directives): New function.
(arm_file_start): Call it.
* config/arm/arm-cpu-cdata.h: Regenerated.
* config/arm/arm-cpu-data.h: Likewise.
* config/arm/arm-tables.opt: Likewise.
From-SVN: r249282
The assembler doesn't understand -mfpu=auto. The easiest way to handle this
is to surpress this value from being passed through, while still passing
through legacy values.
* config/arm/elf.h (ASM_SPEC): Only pass -mfpu through to the
assembler when it is not -mfpu=auto.
From-SVN: r249281
The assembler does not understand all the '+' options accepted by the
compiler. The best solution to this is to simply strip the extensions
and just pass the raw architecture or cpu name through to the
assembler. We will use .arch and .arch_extension directives anyway to
turn on or off individual features. We already do something similar
for big.little combinations and this just extends this principle a bit
further. This patch also fixes a possible bug by ensuring that the
limited string copy is correctly NUL-terminated.
While messing with this code I've also taken the opportunity to clean up
the duplicate definitions of EXTRA_SPEC_FUNCTIONS by moving it outside of
the ifdef wrapper.
* config/arm/arm.h (BIG_LITTLE_SPEC): Delete macro.
(ASM_REWRITE_SPEC_FUNCTIONS): New macro.
(BIG_LITTLE_CPU_SPEC_FUNCTIONS): Delete macro.
(ASM_CPU_SPEC): Rewrite.
(MCPU_MTUNE_NATIVE_FUNCTIONS): New macro.
(EXTRA_SPEC_FUNCTIONS): Move outside of ifdef. Use
MCPU_MTUNE_NATIVE_FUNCTIONS and ASM_REWRITE_SPEC_FUNCTIONS. Remove
reference to BIG_LITTLE_CPU_SPEC_FUNCTIONS.
* common/config/arm/arm-common.c (arm_rewrite_selected_cpu): Ensure
copied string is NUL-terminated. Also strip any characters prefixed
by '+'.
(arm_rewrite_selected_arch): New function.
(arm_rewrite_march): New function.
From-SVN: r249280
In order to support more complex specifications for cpus and architectures
we need to move away from using enumerations to represent the set of
permitted options. This basic change just moves the option parsing
infrastructure over to that, but changes nothing more beyond generating
a hint when the specified option does not match a known target (previously
the help option was able to print out all the permitted values, but we
can no-longer do that.
* config/arm/arm.opt (x_arm_arch_string): New TargetSave option.
(x_arm_cpu_string, x_arm_tune_string): Likewise.
(march, mcpu, mtune): Convert to string-based options.
* config/arm/arm.c (arm_print_hint_for_core_or_arch): New function.
(arm_parse_arch_cpu_name): New function.
(arm_configure_build_target): Use arm_parse_arch_cpu_name to
identify selected architecture or CPU.
(arm_option_save): New function.
(TARGET_OPTION_SAVE): Redefine.
(arm_option_restore): Restore string options.
(arm_option_print): Print string options.
From-SVN: r249279
gcc/
PR target/71778
* config/arm/arm-builtins.c (arm_expand_builtin_args): Return TARGET
if given a non-constant argument for an intrinsic which requires a
constant.
gcc/testsuite/
PR target/71778
* gcc.target/arm/pr71778.c: New.
From-SVN: r249272
* profile.c (compare_freqs): New function.
(branch_prob): Sort edge list.
(find_spanning_tree): Assume that the list is priority sorted.
From-SVN: r249270
Make rtti lazier
* rtti.c (enum tinfo_kind): Add TK_DERIVED_TYPES,
TK_VMI_CLASS_TYPES, TK_MAX. Delete TK_FIXED.
(tinfo_names): New.
(typeid_ok_p): Add quotes to error messages. Use get_tinfo_desc.
(get_tinfo_decl): Use get_tinfo_desc.
(get_pseudo_ti_init): Likewise. Adjust VMI construction.
(create_pseudo_type_info): Delete.
(get_pseudo_ti_index): Just determine the index.
(get_tinfo_desc): New. Create all types lazily.
(create_tinfo_types): Just allocate the descriptor array.
(emit_support_tinfos): Use non-inserting type lookup. Set builtin
location.
From-SVN: r249258
PR libstdc++/81092
* acinclude.m4: Bump libtool_VERSION.
* config/abi/post/i386-linux-gnu/baseline_symbols.txt: Update.
* config/abi/post/x86_64-linux-gnu/32/baseline_symbols.txt: Update.
* config/abi/pre/gnu.ver: Add wstring constructor symbols to
GLIBCXX_3.4.24 version and move random_device::_M_get_entropy() symbol
to new GLIBCXX_3.4.25 version.
* doc/xml/manual/abi.xml: Document new versions.
* doc/html/*: Regenerate.
* testsuite/21_strings/basic_string/cons/char/8.cc: Use base object
constructors to ensure required symbols are exported.
* testsuite/21_strings/basic_string/cons/wchar_t/8.cc: Likewise.
* testsuite/util/testsuite_abi.cc: Add new version.
From-SVN: r249246
* config/aarch64/aarch64.c (aarch64_override_options_internal):
Set flag_prefetch_loop_arrays according to tuning data.
Change-Id: Id41411e671e0a55dc7268e0ad0a4e8ff1421c90a
From-SVN: r249241
