2016-08-25 Richard Biener <rguenther@suse.de>
* dwarf2out.c (gen_remaining_tmpl_value_param_die_attributes):
Only add locations in late dwarf.
(gen_scheduled_generic_parms_dies): Do not set early dwarf here.
(dwarf2out_early_finish): But do it here.
From-SVN: r239753
PR c/77323
* c-decl.c (declspecs_add_type): Set typespec_word even when __intN
or _FloatN or _FloatNx is not supported.
(finish_declspecs): Set type to integer_type_node when _FloatN or
_FloatNx is not supported.
* gcc.dg/pr77323.c: New test.
From-SVN: r239752
2016-08-24 Paul Thomas <pault@gcc.gnu.org>
PR fortran/77358
* resolve.c (resolve_fl_procedure): Use the correct gfc_charlen
for deferred character length module procedures.
2016-08-24 Paul Thomas <pault@gcc.gnu.org>
PR fortran/77358
* gfortran.dg/submodule_17.f08: New test.
From-SVN: r239740
2016-08-24 Michael Collison <michael.collison@linaro.org>
Michael Collison <michael.collison@arm.com>
* config/arm/arm-modes.def: Add new condition code mode CC_V
to represent the overflow bit.
* config/arm/arm.c (maybe_get_arm_condition_code):
Add support for CC_Vmode.
(arm_gen_unlikely_cbranch): New function to generate common
rtl conditional branches for overflow patterns.
* config/arm/arm-protos.h: Add prototype for
arm_gen_unlikely_cbranch.
* config/arm/arm.md (addv<mode>4, add<mode>3_compareV,
addsi3_compareV_upper): New patterns to support signed
builtin overflow add operations.
(uaddv<mode>4, add<mode>3_compareC, addsi3_compareV_upper):
New patterns to support unsigned builtin add overflow operations.
(subv<mode>4, sub<mode>3_compare1): New patterns to support signed
builtin overflow subtract operations,
(usubv<mode>4): New patterns to support unsigned builtin subtract
overflow operations.
(negvsi3, negvdi3, negdi2_compare, negsi2_carryin_compare): New patterns
to support builtin overflow negate operations.
* gcc.target/arm/builtin_saddl.c: New testcase.
* gcc.target/arm/builtin_saddll.c: New testcase.
* gcc.target/arm/builtin_uaddl.c: New testcase.
* gcc.target/arm/builtin_uaddll.c: New testcase.
* gcc.target/arm/builtin_ssubl.c: New testcase.
* gcc.target/arm/builtin_ssubll.c: New testcase.
* gcc.target/arm/builtin_usubl.c: New testcase.
* gcc.target/arm/builtin_usubll.c: New testcase.
Co-Authored-By: Michael Collison <michael.collison@arm.com>
From-SVN: r239739
This patch caused a bootstrap failure on AIX.
2016-08-24 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
Revert
2016-08-23 Dominik Vogt <vogt@linux.vnet.ibm.com>
* explow.c (get_dynamic_stack_size): Take known alignment of stack
pointer + STACK_DYNAMIC_OFFSET into account when calculating the
size needed.
From-SVN: r239735
2016-08-24 Thomas Preud'homme <thomas.preudhomme@arm.com>
* doc/fragments.texi (MULTILIB_REUSE): Mention that only options in
MULTILIB_OPTIONS should be used. Small wording fixes.
* genmultilib: Memorize set of all option combinations in
combination_space. Detect if RHS of MULTILIB_REUSE uses an option not
found in MULTILIB_OPTIONS by checking if option set is listed in
combination_space. Output new and existing error message to stderr.
From-SVN: r239734
2016-08-24 Thomas Preud'homme <thomas.preudhomme@arm.com>
* config/arm/t-aprofile (MULTILIB_MATCHES): Add mapping for
-mcpu=cortex-a7, -mfpu=neon-fp16, -mfpu=fpv5-d16 and -mfpu=fp-armv8.
Fix typo in -mfpu=vfpv3-d16-fp16 mapping.
(MULTILIB_REUSE): Remove reuse rules for option set including
-mfpu=fp-armv8 and -mfpu=vfpv4
From-SVN: r239733
[gcc]
2016-08-23 Michael Meissner <meissner@linux.vnet.ibm.com>
* config/rs6000/rs6000.c (rs6000_expand_vector_init): Set
initialization of all 0's to the 0 constant, instead of directly
generating XOR. Add support for V4SImode vector initialization on
64-bit systems with direct move, and rework the ISA 3.0 V4SImode
initialization. Change variables used in V4SFmode vector
intialization. For V4SFmode vector splat on ISA 3.0, make sure
any memory addresses are in index form. Add support for using
VSPLTH/VSPLTB to initialize vector short and vector char vectors
with all of the same element.
(regno_or_subregno): New helper function to return a register
number for either REG or SUBREG.
(rs6000_adjust_vec_address): Do not generate ADDI <reg>,R0,<num>.
Use regno_or_subregno where possible.
(rs6000_split_v4si_init_di_reg): New helper function to build up a
DImode value from two SImode values in order to generate V4SImode
vector initialization on 64-bit systems with direct move.
(rs6000_split_v4si_init): Split up the insns for a V4SImode vector
initialization.
(rtx_is_swappable_p): V4SImode vector initialization insn is not
swappable.
* config/rs6000/rs6000-protos.h (rs6000_split_v4si_init): Add
declaration.
* config/rs6000/vsx.md (VSX_SPLAT_I): New mode iterators and
attributes to initialize V8HImode and V16QImode vectors with the
same element.
(VSX_SPLAT_COUNT): Likewise.
(VSX_SPLAT_SUFFIX): Likewise.
(UNSPEC_VSX_VEC_INIT): New unspec.
(vsx_concat_v2sf): Eliminate using 'preferred' register classes.
Allow SFmode values to come from Altivec registers.
(vsx_init_v4si): New insn/split for V4SImode vector initialization
on 64-bit systems with direct move.
(vsx_splat_<mode>, VSX_W iterator): Rework V4SImode and V4SFmode
vector initializations, to allow V4SImode vector initializations
on 64-bit systems with direct move.
(vsx_splat_v4si): Likewise.
(vsx_splat_v4si_di): Likewise.
(vsx_splat_v4sf): Likewise.
(vsx_splat_v4sf_internal): Likewise.
(vsx_xxspltw_<mode>, VSX_W iterator): Eliminate using 'preferred'
register classes.
(vsx_xxspltw_<mode>_direct, VSX_W iterator): Likewise.
(vsx_vsplt<VSX_SPLAT_SUFFIX>_di): New insns to support
initializing V8HImode and V16QImode vectors with the same
element.
* config/rs6000/rs6000.h (TARGET_DIRECT_MOVE_64BIT): Disallow
optimization if -maltivec=be.
[gcc/testsuite]
2016-08-23 Michael Meissner <meissner@linux.vnet.ibm.com>
* gcc.target/powerpc/vec-init-1.c: Add tests where the vector is
being created from pointers to memory locations.
* gcc.target/powerpc/vec-init-2.c: Likewise.
From-SVN: r239712
Switch to a new method for determining the order in which import init
functions are invoked: build an init fcn dependence DAG and walk the DAG
to rewrite/adjust priorities to account for discrepancies introduced by
"go test".
This patch includes a change to the export data format generated
by gccgo. Older versions of gccgo will not be able to read object files
produced by a newer gccgo, but the new gcc will still be able to read
old object files.
Fixesgolang/go#15738.
Reviewed-on: https://go-review.googlesource.com/25301
From-SVN: r239708
2016-08-23 Richard Biener <rguenther@suse.de>
PR tree-optimization/77286
* tree-vect-loop.c (vect_analyze_loop_form_1): Do not modify
the CFG here.
(vect_transform_loop): Split exit edges of loop and scalar
loop if required and at the appropriate time.
From-SVN: r239700
PR libstdc++/71771
* include/bits/stl_iterator.h
(operator-(reverse_iterator<Iter>, reverse_iterator<Iter>): Only
define for C++98 mode.
(operator-(move_iterator<Iter>, move_iterator<Iter>): Don't define.
* testsuite/24_iterators/headers/iterator/synopsis.cc: Use
-std=gnu++98.
* testsuite/24_iterators/headers/iterator/synopsis_c++11.cc: New test.
* testsuite/24_iterators/headers/iterator/synopsis_c++14.cc: New test.
* testsuite/24_iterators/headers/iterator/synopsis_c++17.cc: New test.
* testsuite/24_iterators/move_iterator/greedy_ops.cc: Don't test
difference operator.
* testsuite/24_iterators/reverse_iterator/greedy_ops.cc: Only test
difference operator for C++98.
* testsuite/24_iterators/reverse_iterator/71771.cc: New test.
From-SVN: r239691
* get_dynamic_stack_size is passed a SIZE of a data block (which is
allocated elsewhere), the SIZE_ALIGN of the SIZE (i.e. the alignment
of the underlying memory units (e.g. 32 bytes split into 4 times 8
bytes = 64 bit alignment) and the REQUIRED_ALIGN of the data portion
of the allocated memory.
* Assuming the function is called with SIZE = 2, SIZE_ALIGN = 8 and
REQUIRED_ALIGN = 64 it first adds 7 bytes to SIZE -> 9. This is
what is needed to have two bytes 8-byte-aligned at some memory
location without any known alignment.
* Finally round_push is called to round up SIZE to a multiple of the
stack slot size.
The key to understanding this is that the function assumes that
STACK_DYNMAIC_OFFSET is completely unknown at the time its called
and therefore it does not make assumptions about the alignment of
STACKPOINTER + STACK_DYNMAIC_OFFSET. The latest patch simply
hard-codes that SP + SDO is supposed to be aligned to at least
stack slot size (and does that in a very complicated way). Since
there is no guarantee that this is the case on all targets, the
patch is broken. It may miscalculate a SIZE that is too small in
some cases.
However, on many targets there is some guarantee about the
alignment of SP + SDO even if the actual value of SDO is unknown.
On s390x it's always 8-byte-aligned (stack slot size). So the
right fix should be to add knowledge about the target's guaranteed
alignment of SP + SDO to the function. I'm right now testing a
much simpler patch that uses
REGNO_POINTER_ALIGN(VIRTUAL_STACK_DYNAMIC_REGNUM) as the
alignment.
gcc/ChangeLog:
2016-08-23 Dominik Vogt <vogt@linux.vnet.ibm.com>
* explow.c (get_dynamic_stack_size): Take known alignment of stack
pointer + STACK_DYNAMIC_OFFSET into account when calculating the
size needed. Correct a typo in a comment.
From-SVN: r239688
gcc/testsuite/ChangeLog:
2016-08-23 Dominik Vogt <vogt@linux.vnet.ibm.com>
* gcc.target/s390/insv-1.c: Fix test when running with -m31.
From-SVN: r239687
THe attached patch improves checking of teh results of the subtests
"a" and "f". As they share the same "vone" instruction, the duplicate
scan-assembler-times was bogus. Moved "f" to a separate function to
fix this. Also double check that no extra "vgmf" instructions are
used.
gcc/testsuite/ChangeLog:
2016-08-23 Dominik Vogt <vogt@linux.vnet.ibm.com>
* gcc.target/s390/zvector/vec-genmask-1.c: Improve result
verification.
From-SVN: r239686
Split ~b & a to (b & a) ^ a. This is benefitial on z Systems since we
otherwise need a big -1 constant to be loaded for the ~b.
gcc/ChangeLog:
2016-08-23 Dominik Vogt <vogt@linux.vnet.ibm.com>
* config/s390/s390.md ("*andc_split"): New splitter for and with
complement.
gcc/testsuite/ChangeLog:
2016-08-23 Dominik Vogt <vogt@linux.vnet.ibm.com>
* gcc.target/s390/md/andc-splitter-1.c: New test case.
* gcc.target/s390/md/andc-splitter-2.c: Likewise.
From-SVN: r239685
2016-08-23 Richard Biener <rguenther@suse.de>
PR tree-optimization/27336
* tree-vrp.c (infer_value_range): Handle stmts that can throw
by looking for a non-EH edge.
(process_assert_insertions_for): Likewise.
* c-c++-common/pr27336.c: New testcase.
From-SVN: r239684
When lowering method expressions of the form "P.M" where
P is a pointer type (e.g. "type P *T") make sure we examine
the method set of P and not T during method lookup.
Fixesgolang/go#15722.
Reviewed-on: https://go-review.googlesource.com/24843
From-SVN: r239675
2016-08-22 Steven G. Kargl <kargl@gcc.gnu.org>
Bud Davis <jmdavis@link.com>
PR fortran/60774
* parse.c (next_free,next_fixed): Issue error for statement label
without a statement.
2016-08-22 Steven G. Kargl <kargl@gcc.gnu.org>
PR fortran/60774
* gfortran.dg/empty_label.f: Adjust test for new error message.
* gfortran.dg/empty_label.f90: Ditto.
* gfortran.dg/empty_label_typedecl.f90: Ditto.
* gfortran.dg/label_3.f90: Deleted (redundant with empty_label.f90).
* gfortran.dg/warnings_are_errors_1.f90: Remove invalid statement label.
Co-Authored-By: Bud Davis <jmdavis@link.com>
From-SVN: r239668
2016-08-22 Steven G. Kargl <kargl@gcc.gnu.org>
PR fortran/61318
* interface.c (compare_parameter): Use better locus for error message.
2016-08-22 Steven G. Kargl <kargl@gcc.gnu.org>
PR fortran/61318
* gfortran.dg/pr61318.f90: New test.
From-SVN: r239667
2016-08-22 Steven G. Kargl <kargl@gcc.gnu.org>
PR fortran/77260
* gcc/fortran/trans-decl.c (generate_local_decl): Suppress warning
for unused variable if symbol is entry point.
2016-08-22 Steven G. Kargl <kargl@gcc.gnu.org>
PR fortran/77260
* gfortran.dg/pr77260_1.f90: New test.
* gfortran.dg/pr77260_2.f90: Ditto.
From-SVN: r239666
The __builtin_isinf_sign folding uses a type-specific signbit built-in
function, meaning it only works for the types float, double and long
double, not for types such as _FloatN, _FloatNx, __float128. Since
the signbit built-in function is now type-generic, that can be used
unconditionally, much as the code uses the type-generic isinf built-in
function unconditionally, and this patch makes it do so, thereby
enabling __builtin_isinf_sign (which glibc uses to expand the isinf
macro since that macro in glibc traditionally provided the stronger
guarantees about the return value given by __builtin_isinf_sign) to
work for all floating-point types.
The test gcc.dg/torture/builtin-isinf_sign-1.c needs updating because
it tests that comparisons of calls to __builtin_isinf_sign to
conditional expressions involving __builtin_isinf and
__builtin_signbit* get optimized away, and with a change of what
particular built-in function for signbit is used, GCC doesn't notice
the expressions with type-generic and non-type-generic built-in
functions are equivalent at -O0 or -O1 (it does optimize away the
original test at -O2).
Bootstrapped with no regressions on x86_64-pc-linux-gnu.
PR middle-end/77269
gcc:
* builtins.c (fold_builtin_classify): Use builtin_decl_explicit
(BUILT_IN_SIGNBIT) to expand __builtin_isinf_sign.
gcc/testsuite:
* gcc.dg/torture/builtin-isinf_sign-1.c: Use __builtin_signbit not
__builtin_signbitf and __builtin_signbitl in expected generic
expansion.
* gcc.dg/torture/float128-tg-2.c, gcc.dg/torture/float128x-tg-2.c,
gcc.dg/torture/float16-tg-2.c, gcc.dg/torture/float32-tg-2.c,
gcc.dg/torture/float32x-tg-2.c, gcc.dg/torture/float64-tg-2.c,
gcc.dg/torture/float64x-tg-2.c, gcc.dg/torture/floatn-tg-2.h: New
tests.
From-SVN: r239665
Marek Polacek
David Edelsohn
Richard Biener
GCC Administrator
Paul Thomas
Michael Collison
Uros Bizjak
Andreas Krebbel
Thomas Preud'homme
Senthil Kumar Selvaraj
Aditya Kumar
Robert Suchanek
Sebastian Huber
Ian Lance Taylor
Michael Meissner
David Malcolm
Christophe Lyon
Fritz Reese
Ian Lance Taylor
Jonathan Wakely
Dominik Vogt
Venkataramanan Kumar
Tim Shen
Steven G. Kargl
Joseph Myers
Gleb Natapov