The go tool will pass -I objdir as one of the flags, where objdir is
the temporary build directory. Remove that from _cgo_flags: we don't
need it, and it will be different each time.
Sort the flags to avoid the unpredictable map iteration order.
This matters for gccgo because for a package that uses cgo, the go
tool when building for gccgo will store the _cgo_flags file in the
archive. That means that we want to generate identical _cgo_flags for
every run.
The test for this is the cmd/go testsuite, to follow in a future CL.
Reviewed-on: https://go-review.googlesource.com/45692
From-SVN: r249199
Pass the -fdebug-prefix-map and -gno-record-gcc-switches compiler
options to gccgo to generate consistent results.
Fix the vendoring code to look for /vendor/, not just /vendor, to
avoid being confused by something like vendor/vendor.org.
Tested by the cmd/go tests in a followup CL.
Reviewed-on: https://go-review.googlesource.com/45695
From-SVN: r249198
These tests fail for various reasons, most commonly because gccgo
doesn't really have GOROOT, so things like `go build errors` fail.
Reviewed-on: https://go-review.googlesource.com/45696
From-SVN: r249197
Add the environment variable GCCGOTOOLDIR to permit overriding the default
directory where tools like cgo are found when building with gccgo.
This will be used by the cmd/go tests in a future CL.
Reviewed-on: https://go-review.googlesource.com/45694
From-SVN: r249196
If GO_TESTING_GOTOOLS is set in the environment, permit tests using
gccgo to run the go tool. Like GO_BUILDER_NAME, this should not be set
normally. But it is needed when testing the go tool itself, and will
be set by the gotools Makefile in a future CL.
Reviewed-on: https://go-review.googlesource.com/45693
From-SVN: r249195
If there is no function name, the traceback is generally
uninformative. In earlier versions we did not show such frames.
Restore that behavior. These frames can be seen with GOTRACEBACK=system.
Reviewed-on: https://go-review.googlesource.com/45431
From-SVN: r249156
Otherwise it may be set when the g struct is reused via gfput/gfget.
Test is golang.org/x/net/http2 with GOMAXPROCS=12.
Reviewed-on: https://go-review.googlesource.com/45430
From-SVN: r249143
Also always access the atomicstatus field atomically.
The effect of not checking the _Gscan bit is that if the GC decides to
scan the stack just as the goroutine is leaving the system call, the
goroutine might fail to call exitsyscall. Then then typically causes
a runtime assertion failure later on. If we do call exitsyscall as we
should, it will stall (in casgstatus) until the _Gscan bit is cleared.
No separate test. I've observed causing sporadic failures running the
misc/cgo tests, but we don't currently have a way to run those
routinely for gccgo. I should fix that.
Reviewed-on: https://go-review.googlesource.com/45392
From-SVN: r249138
Fix lfstack code to work with sparc64 GNU/Linux address map.
Force alignment of epollevent. To make this work reliably, pass
GOARCH explicitly to mkrsysinfo.sh.
Patch by Vladimir Mezentsev.
Reviewed-on: https://go-review.googlesource.com/44494
From-SVN: r248765
Ensure that the packages vendored into the standard library do not
have the same pkgpath as the actual packages. If we don't, attempts
to build and test the actual packages will get confused. The specific
error I was seeing was import loops, causing some of the packages to
fail to get initialized, causing an obscure run time crash.
Reviewed-on: https://go-review.googlesource.com/43610
From-SVN: r248168
Change memory allocation accounting for stacks to use stacks_sys,
since that seems to be what it is for.
Reviewed-on: https://go-review.googlesource.com/43297
From-SVN: r247967
On MIPS, SIGABRT is defined like this:
#define SIGIOT 6
#define SIGABRT SIGIOT
This breaks addsig which tries to append __SIGIOT_ to SIGLIST. Signal
number 6 is later added to the output and go complains about a
duplicate signal number.
Fix by recursing once when obtaining the signal number from
gen-sysinfo.go if the signal is defined as an alias of another signal.
Also modify the sed expression to 's/.* = //' which is equivalent to
the original expression but is less misleading given that it might not
match a number.
Reviewed-on: https://go-review.googlesource.com/43252
From-SVN: r247948
The gc toolchain decides whether a goroutine is a system goroutine by
comparing startpc to a list of saved special PCs. In gccgo that
approach does not work as startpc is often a thunk that invokes the
real function with arguments, so the thunk address never matches the
saved special PCs.
This patch fixes gccgo's understanding of system goroutines. Since
there are only a limited number of them, we simply change each one to
mark itself as special.
This fixes stack dumps and functions like runtime.NumGoroutine to
behave more like gc. It also fixes the goprint test in the gc
testsuite.
Reviewed-on: https://go-review.googlesource.com/43156
From-SVN: r247931
GCC release freeze.
* go-backend.c: Include "go-c.h".
* go-gcc.cc (Gcc_backend::write_export_data): New method.
* go-gcc.cc (Gcc_backend::Gcc_backend): Declare
__builtin_prefetch.
* Make-lang.in (GO_OBJS): Add go/wb.o.
commit 884c9f2cafb3fc1decaca70f1817ae269e4c6889
Author: Than McIntosh <thanm@google.com>
Date: Mon Jan 23 15:07:07 2017 -0500
compiler: insert additional conversion for type desc ptr expr
Change the method Type::type_descriptor_pointer to apply an additional
type conversion to its result Bexpression, to avoid type clashes in
the back end. The backend expression for a given type descriptor var
is given a type of "_type", however the virtual calls that create the
variable use types derived from _type, hence the need to force a
conversion.
Reviewed-on: https://go-review.googlesource.com/35506
commit 5f0647c71e3b29eddcd0eecc44e7ba44ae7fc8dd
Author: Than McIntosh <thanm@google.com>
Date: Mon Jan 23 15:22:26 2017 -0500
compiler: insure tree integrity in Call_expression::set_result
Depending on the back end, it can be problematic to reuse Bexpressions
(passing the same Bexpression to more than one Backend call to create
additional Bexpressions or Bstatements). The Call_expression::set_result
method was reusing its Bexpression input in more than one tree
context; the fix is to pass in an Expression instead and generate
multiple Bexpression references to it within the method.
Reviewed-on: https://go-review.googlesource.com/35505
commit 7a8e49870885af898c3c790275e513d1764a2828
Author: Ian Lance Taylor <iant@golang.org>
Date: Tue Jan 24 21:19:06 2017 -0800
runtime: copy more of the scheduler from the Go 1.8 runtime
Copies mstart, newm, m0, g0, and friends.
Reviewed-on: https://go-review.googlesource.com/35645
commit 3546e2f002d0277d805ec59c5403bc1d4eda4ed9
Author: Ian Lance Taylor <iant@golang.org>
Date: Thu Jan 26 19:47:37 2017 -0800
runtime: remove a few C functions that are no longer used
Reviewed-on: https://go-review.googlesource.com/35849
commit a71b835254f6d3164a0e6beaf54f2b175d1a6a92
Author: Ian Lance Taylor <iant@golang.org>
Date: Thu Jan 26 16:51:16 2017 -0800
runtime: copy over more of the Go 1.8 scheduler
In particular __go_go (aka newproc) and goexit[01].
Reviewed-on: https://go-review.googlesource.com/35847
commit c3ffff725adbe54d8283c373b6aa7dc95d6fc27f
Author: Ian Lance Taylor <iant@golang.org>
Date: Fri Jan 27 16:58:20 2017 -0800
runtime: copy syscall handling from Go 1.8 runtime
Entering a syscall still has to start in C, to save the registers.
Fix entersyscallblock to save them more reliably.
This copies over the tracing code for syscalls, which we previously
weren't doing, and lets us turn on runtime/trace/check.
Reviewed-on: https://go-review.googlesource.com/35912
commit d5b921de4a28b04000fc4c8dac7f529a4a624dfc
Author: Ian Lance Taylor <iant@golang.org>
Date: Fri Jan 27 18:34:11 2017 -0800
runtime: copy SIGPROF handling from Go 1.8 runtime
Also copy over Breakpoint.
Fix Func.Name and Func.Entry to not crash on a nil Func.
Reviewed-on: https://go-review.googlesource.com/35913
commit cc60235e55aef14b15c3d2114030245beb3adfef
Author: Than McIntosh <thanm@google.com>
Date: Mon Feb 6 11:12:12 2017 -0500
compiler: convert go_write_export_data to Backend method.
Convert the helper function 'go_write_export_data' into a Backend
class method, to allow for an implementation of this function that
needs to access backend state.
Reviewed-on: https://go-review.googlesource.com/36357
commit e387439bfd24d5e142874b8e68e7039f74c744d7
Author: Than McIntosh <thanm@google.com>
Date: Wed Feb 8 11:13:46 2017 -0500
compiler: insert backend conversion in temporary statement init
Insert an additional type conversion in Temporary_statement::do_get_backend
when assigning a Bexpression initializer to the temporary variable, to
avoid potential clashes in the back end. This can come up when assigning
something of concrete pointer-to-function type to a variable of generic
pointer-to-function type.
Reviewed-on: https://go-review.googlesource.com/36591
commit c5acf0ce09e61ff623847a35a99da465b8571609
Author: Matthieu Sarter <matthieu.sarter.external@atos.net>
Date: Wed Mar 1 17:57:53 2017 +0100
libgo: build tags for aix
Build tags for the libgo source files required to build
libgo on AIX.
Issue golang/go#19200
Reviewed-on: https://go-review.googlesource.com/37633
commit 67ed19616898ea18a101ec9325b82d028cd395d9
Author: Matthieu Sarter <matthieu.sarter.external@atos.net>
Date: Thu Mar 2 15:41:31 2017 +0100
libgo: handle AIX tag in match.sh and gotest
Issue golang/go#19200
Reviewed-on: https://go-review.googlesource.com/37638
commit 83ea2d694c10b2dd83fc8620c43da13d20db754e
Author: Matthieu Sarter <matthieu.sarter.external@atos.net>
Date: Wed Mar 1 17:48:16 2017 +0100
libgo: add AIX support in configure and Makefile
- support for GOOS=aix
- CFLAGS/GOCFLAGS/LDFLAGS for AIX
Issue golang/go#19200
Reviewed-on: https://go-review.googlesource.com/37632
commit 35d577fe22ffa16a3ccaadf5dae9f6f425c8ec8c
Author: Matthieu Sarter <matthieu.sarter.external@atos.net>
Date: Mon Mar 6 15:00:15 2017 +0100
runtime: adapt memory management to AIX mmap
On AIX:
* mmap does not allow to map an already mapped range,
* mmap range start at 0x30000000 for 32 bits processes,
* mmap range start at 0x70000000_00000000 for 64 bits processes
Issue golang/go#19200
Reviewed-on: https://go-review.googlesource.com/37845
commit 4e49e56a5fd4072b4ca7fcefe4158d6885d9ee62
Author: Matthieu Sarter <matthieu.sarter.external@atos.net>
Date: Mon Mar 6 13:42:26 2017 +0100
runtime: add getproccount implementation for AIX
Issue golang/go#19200
Reviewed-on: https://go-review.googlesource.com/37844
commit ff626470294237ac664127894826614edc46a3d0
Author: Matthieu Sarter <matthieu.sarter.external@atos.net>
Date: Mon Mar 6 17:31:21 2017 +0100
runtime: handle ERESTART errno with AIX's wait4
On AIX, wait4 may return with errno set to ERESTART, which causes unexepected
behavior (for instance, go build may exit with the message "wait: restart
system call" after running a command, even if it was successfull).
Issue golang/go#19200
Reviewed-on: https://go-review.googlesource.com/37846
commit 37daabbfc83d533b826ef9ab10e2dee7406e7198
Author: Matthieu Sarter <matthieu.sarter.external@atos.net>
Date: Mon Mar 6 11:02:58 2017 +0100
runtime: support for AIX's procfs tree
On AIX, the process executable file is available under /proc/<pid>/object/a.out
Issue golang/go#19200
Reviewed-on: https://go-review.googlesource.com/37842
commit a0275c039d56acf4bf48151978c1a4ec5758cc2c
Author: Ian Lance Taylor <iant@golang.org>
Date: Wed Mar 8 07:00:05 2017 -0800
libgo/Makefile.am: don't use nonportable \n or \t in sed expression
The resulting zstdpktlist.go is less pretty, but it works.
Reviewed-on: https://go-review.googlesource.com/37940
commit 29b190f76105aafa2b50b48249afdafecc97a4be
Author: Matthieu Sarter <matthieu.sarter.external@atos.net>
Date: Thu Mar 9 16:02:34 2017 +0100
runtime: netpoll and semaphores for AIX
semaphore implementation based on Solaris implementation in
libgo/go/runtime/os_solaris.go
netpoll is just a stub to avoid build failure on AIX.
Issue golang/go#19200
Reviewed-on: https://go-review.googlesource.com/37966
commit 55ca6d3f3cddf0ff9ccb074b2694da9fc54de7ec
Author: Matthieu Sarter <matthieu.sarter.external@atos.net>
Date: Thu Mar 9 15:38:30 2017 +0100
libmain: ensure initfn is called when loading a go library
AIX does not support .init_array.
The alterative is to export the __go_init function and tell the linker
it is an init function with the -Wl,-binitfini:__go_init option.
Issue golang/go#19200
Reviewed-on: https://go-review.googlesource.com/37965
commit 349a30d17d880ac8bc1a35e1a2ffee6d6e870ae9
Author: Matthieu Sarter <matthieu.sarter.external@atos.net>
Date: Fri Mar 10 11:15:08 2017 +0100
libgo: use an import list for missing symbols
libgo depends on symbols provided by Go programs at runtime. On AIX,
this requires either to build libgo with -Wl,-berok linker option and
the programs with -Wl,-brtl, or to provide a list of imported symbols
when building libgo. The second options seems preferable, to avoid
requiring an additional option for every Go program.
There are also some symbols that are specific to GNU ld and do not
exist when linking with AIX ld (__data_start, __edata, __etext and
__bss_start).
Issue golang/go#19200
Reviewed-on: https://go-review.googlesource.com/37969
commit 91db0ea1ff068ca1d97b9c99612100ea5b96ddb2
Author: Matthieu Sarter <matthieu.sarter.external@atos.net>
Date: Wed Mar 8 15:34:45 2017 +0100
crypto/x509: add certificate files locations for AIX
Issue golang/go#19200
Reviewed-on: https://go-review.googlesource.com/37952
commit 92e521c854e91709b949548c47e267377850f26a
Author: Ian Lance Taylor <iant@golang.org>
Date: Fri Mar 10 14:10:11 2017 -0800
compiler: fix check for pointer in Temporary_reference_expression
The check for an unrepresentable pointer in
Temporary_reference_expression::do_get_backend was incorrectly
translated from C to Go in https://golang.org/cl/14346043. Fix the
check to use points_to rather than has_pointer and deref. This should
not make any difference in practice as either way the condition will
only be true for a pointer to void, but points_to is correct and more
efficient.
Reviewed-on: https://go-review.googlesource.com/38009
commit 9a0b676e59e7171a630c48fdc3d4de6712bad0ca
Author: Matthieu Sarter <matthieu.sarter.external@atos.net>
Date: Thu Mar 16 16:51:53 2017 +0100
libgo: add missing _arpcom struct to *sysinfo.go
This struct is filtered due to having a field of type _in6_addr,
but other types exported to *sysinfo.go are depending on it.
Issue golang/go#19200
Reviewed-on: https://go-review.googlesource.com/38251
commit 61262a757bdd3d9a595ab6a90f68c0c4ebed7bc1
Author: Matthieu Sarter <matthieu.sarter.external@atos.net>
Date: Thu Mar 16 18:27:46 2017 +0100
syscall: raw_ptrace stub for AIX
Issue golang/go#19200
Reviewed-on: https://go-review.googlesource.com/38253
commit 8029632b50880fd9b5e39299c738b38e3386595f
Author: Matthieu Sarter <matthieu.sarter.external@atos.net>
Date: Wed Mar 15 16:58:37 2017 +0100
libgo: adapt runtime.inc to AIX
* Two AIX types are wrongfully exported to runtime.inc as their names
make them look like a Go type.
* The sigset go type conflicts with a system sigset type.
Issue golang/go#19200
Reviewed-on: https://go-review.googlesource.com/38192
commit 25f3a90d14bc268479369ecc0eada72791612f86
Author: Matthieu Sarter <matthieu.sarter.external@atos.net>
Date: Wed Mar 15 16:58:37 2017 +0100
libgo: update Makefile.in, accidentally omitted from last change
Issue golang/go#19200
Reviewed-on: https://go-review.googlesource.com/38310
commit d52b4895616b66f93b460366527e74336829aaa5
Author: Matthieu Sarter <matthieu.sarter.external@atos.net>
Date: Thu Mar 16 18:39:26 2017 +0100
syscall: TIOCSCTTY does not exist on AIX
Issue golang/go#19200
Reviewed-on: https://go-review.googlesource.com/38254
commit ff1ec3847a4472008e5d53a98b6694b1e54ca322
Author: Matthieu Sarter <matthieu.sarter.external@atos.net>
Date: Thu Mar 16 18:07:34 2017 +0100
syscall: syscall does not exist on AIX
Issue golang/go#19200
Reviewed-on: https://go-review.googlesource.com/38252
commit c1ee60dabf0b243a0b0286215481a5d326c34596
Author: Matthieu Sarter <matthieu.sarter.external@atos.net>
Date: Fri Mar 17 17:18:18 2017 +0100
net: EAI_OVERFLOW does not exist on AIX
Issue golang/go#19200
Reviewed-on: https://go-review.googlesource.com/38266
commit ad4ad29aed9f70b14b39b488bfeb9ee745382ec4
Author: Matthieu Sarter <matthieu.sarter.external@atos.net>
Date: Fri Mar 17 17:23:56 2017 +0100
net: sockopt/sockoptip stubs for AIX
Issue golang/go#19200
Reviewed-on: https://go-review.googlesource.com/38267
commit 5d7db2d7542fe7082f426d42f8c2ce14aad6df55
Author: Matthieu Sarter <matthieu.sarter.external@atos.net>
Date: Fri Mar 17 16:35:05 2017 +0100
os/user: add listgroups stub for AIX
This is required to build os/user.
Issue golang/go#19200
Reviewed-on: https://go-review.googlesource.com/38263
commit 4e57a7973e9fa4cb5ab977c6d792e62a8f7c5795
Author: Matthieu Sarter <matthieu.sarter.external@atos.net>
Date: Wed Mar 22 11:11:30 2017 +0100
os: fix readdirnames for AIX
Largefile implementation should be used on AIX.
readdir64_r function returns 9 and sets result to NULL when
reaching end of directory, so this return code should not
always be considered as an error.
Issue golang/go#19200
Reviewed-on: https://go-review.googlesource.com/38359
commit b34036967d1ec57b25e3debe077439b4210a1d4a
Author: Matthieu Sarter <matthieu.sarter.external@atos.net>
Date: Fri Mar 17 17:39:31 2017 +0100
libgo: adapt sigtab.go to AIX
On AIX, _NSIG is not directly defined to its integer value in
gen-sysinfo.go.
The real value is _SIGMAX32+1 or _SIGMAX64+1, depending if we are
building a 32bit ligbo or a 64bit libgo, so we need to read one of
those constants to set nsig value in mksigtab.sh
This change also ensures that all signal numbers from 0 to nsig-1
are referenced in sigtable.
Reviewed-on: https://go-review.googlesource.com/38268
commit 20991c32671a183ec859b4f285df37fdd4634247
Author: Matthieu Sarter <matthieu.sarter.external@atos.net>
Date: Thu Mar 23 17:28:09 2017 +0100
syscall: missing import in socket_bsd.go
Issue golang/go#19200
Reviewed-on: https://go-review.googlesource.com/38369
commit c34754bd9adf5496c4c26257eaa50793553c11e8
Author: Matthieu Sarter <matthieu.sarter.external@atos.net>
Date: Wed Mar 22 17:57:01 2017 +0100
sycall: WCOREDUMP macro is not defined on AIX
Issue golang/go#19200
Reviewed-on: https://go-review.googlesource.com/38363
commit 4f38813482227b12ea0ac6ac1b981ff9ef9853ef
Author: Matthieu Sarter <matthieu.sarter.external@atos.net>
Date: Thu Mar 23 17:44:43 2017 +0100
libgo: additional build tags for AIX
Issue golang/go#19200
Reviewed-on: https://go-review.googlesource.com/38510
commit d117ede6ff5a7083e9c40eba28a0f94f3535d773
Author: Matthieu Sarter <matthieu.sarter.external@atos.net>
Date: Thu Mar 23 17:48:46 2017 +0100
go/build: add AIX to "go build" command known OS
Issue golang/go#19200
Reviewed-on: https://go-review.googlesource.com/38511
commit 7b0ddaa6a6a71f9eb1c374122d29775b13c2cac5
Author: Ian Lance Taylor <iant@golang.org>
Date: Thu Mar 23 09:57:01 2017 -0700
compiler: don't crash if imported package imports this one
When building a test it's OK if test code imports a package that
imports this one. The go tool is supposed to catch cases where this
creates an impossible initialization order. The compiler already has
code to permit this in Gogo::add_import_init_fn. This CL avoids a
compiler crash on a similar case when writing out the export data.
I have no test case for this. Basically it pushes a compiler crash
into an error reported elsewhere.
Problem was reported by Tony Reix.
Reviewed-on: https://go-review.googlesource.com/38462
commit 925636975d075e3e3353823b09db3f933f23cb03
Author: Ian Lance Taylor <iant@golang.org>
Date: Wed Mar 29 14:14:18 2017 -0700
runtime: copy finalizer support from Go 1.8 runtime
Reviewed-on: https://go-review.googlesource.com/38794
commit 1ccb22b96cb3b1011db0e427877d9ddecb577fa9
Author: Matthieu Sarter <matthieu.sarter.external@atos.net>
Date: Thu Mar 30 15:21:06 2017 +0200
runtime: initcontext and setcontext stubs for AIX
Further investigations are required to understand the clobbering
issue and implement a proper fix. Until then, those stubs are
required to allow the build to complete.
Issue golang/go#19200
Reviewed-on: https://go-review.googlesource.com/38930
commit 27db481f369b54256063c72b911d22390c59199c
Author: Matthieu Sarter <matthieu.sarter.external@atos.net>
Date: Wed Mar 29 18:07:25 2017 +0200
os: fix Readlink failure on AIX
AIX readlink routine returns an error if the link is longer
than the buffer, instead of truncating the link.
Issue golang/go#19200
Reviewed-on: https://go-review.googlesource.com/38700
commit c93babbf48eddd0bc34d4179ffb302dc60087299
Author: Matthieu Sarter <matthieu.sarter.external@atos.net>
Date: Wed Mar 29 17:26:35 2017 +0200
compiler: implement support for reading AIX big archives
This is required to read go export from a Go library.
Code courtesy of Damien Bergamini from Atos Infogérance.
Issue golang/go#19200
Reviewed-on: https://go-review.googlesource.com/38698
commit 930dd53482bdee3a9074850d168d0b9d7819c135
Author: Ian Lance Taylor <iant@golang.org>
Date: Thu Apr 6 18:50:11 2017 -0700
compiler: fix whether conversions are static initializers
The compiler was incorrectly treating type conversions from string to
int or vice-versa as static initializers. That doesn't work, as those
conversions are implemented via a function call.
This case may never actually arise but it seems like the right thing to do.
Reviewed-on: https://go-review.googlesource.com/39872
commit f02691e4195728dbf06f4dde0853c6bccc922183
Author: Ian Lance Taylor <iant@golang.org>
Date: Thu Apr 6 17:24:08 2017 -0700
compiler, runtime: don't let slices point past end of memory block
When Go code uses a slice expression like [:len(str)] or [:cap(slice)],
it's natural for the resulting pointer to point just past the end of
the memory block. If the next memory block is not live, we now have a
live pointer to a dead block, which will unnecessarily keep the block
alive. That wastes space, and with the new Go 1.8 GC (not yet
committed) will trigger an error when using GODEBUG=gccheckmark=1.
This changes the implementation of slice expressions to not move the
pointer if the resulting string length or slice capacity is 0. When
the length/capacity is zero, the pointer is never used anyhow.
Reviewed-on: https://go-review.googlesource.com/39870
commit 17527c35b027e1afcc318faf5563909e1e9d44a6
Author: Ian Lance Taylor <iant@golang.org>
Date: Thu Apr 6 15:30:11 2017 -0700
compiler: emit write barriers
The Go 1.8 concurrent GC requires optional write barriers for all
assignments that may change pointer values in the heap or in a global
variable. For details see https://blog.golang.org/go15gc.
This changes the gofrontend code to emit write barriers as needed.
This is in preparation for future changes. At the moment the write
barriers will do nothing. They test runtime.writeBarrier.enabled,
which will never be non-zero. They call simple functions which just
do a move without doing any of the other operations required by the
write barrier.
Reviewed-on: https://go-review.googlesource.com/39852
commit c0b00f072bf34b2c288e1271ec8118b88c4f6f6f
Author: Matthieu Sarter <matthieu.sarter.external@atos.net>
Date: Tue Apr 11 17:47:29 2017 +0200
libgo: allow building gox files from PIC objects
libtool builds non-PIC objects in the same directory as .lo files
and PIC objects in a .libs subdirectory.
BUILDGOX rule uses the non-PIC objects to build the gox files,
but on AIX only the PIC objects are built.
Issue golang/go#19200
Reviewed-on: https://go-review.googlesource.com/40355
commit ea0f3da174c5503a209043f14ddda34871cfec52
Author: Ian Lance Taylor <iant@golang.org>
Date: Thu Apr 6 19:06:14 2017 -0700
compiler: add code to generate a ptrmask for a type
The Go 1.8 garbage collector uses a ptrmask for all types below a
certain size. A ptrmask is simply a bit vector with a single bit for
each pointer-sized word in the value. The bit is 1 if the type has a
pointer in that position, 0 if it does not.
This change adds code to the compiler to generate a ptrmask. The code
is not used by anything yet, it is just compiled. It will be used
when we switch over to the Go 1.8 garbage collector.
The new Array_type::int_length method, and the new memory_size
methods, will also be used by other patches coming later.
Reviewed-on: https://go-review.googlesource.com/39873
commit 3029e1df3be3614d196a03c15e50e68ff850aa4c
Author: Ian Lance Taylor <iant@golang.org>
Date: Fri Apr 7 10:31:39 2017 -0700
compiler: add code to generate a gcprog for a type
The Go 1.8 garbage collector uses a gcprog for all types above a
certain size. A gcprog describes where the pointers are in the type,
using a simple bytecode machine that supports repeating bits. The
effect is to permit using much less space to describe arrays. The
format is described in runtime/mbitmap.go in the docs for runGCProg.
This is not yet added to the gofrontend, but can be seen in the gc sources.
This change adds code to the compiler to generate a gcprog. The code
is not used by anything yet, it is just compiled. It will be used
when we switch over to the Go 1.8 garbage collector.
Reviewed-on: https://go-review.googlesource.com/39923
commit 8b01ef1e9176d20f4c9e667972fe031069a4d057
Author: Ian Lance Taylor <iant@golang.org>
Date: Thu Apr 13 07:00:35 2017 -0700
compiler: add ptrdata computations and expressions
For the upcoming Go 1.8 GC we need to compute the "ptrdata" of a type:
the number of bytes in the type that can contain pointers. For types
that do not contain pointers this number is zero. For many types it
is a number larger than zero but smaller than the total size of the
type. The Go 1.8 GC uses this number to make loops looking for
pointers run faster by not scanning the suffix of a value that can not
contain a pointer.
Unfortunately there are two subtly different definitions of ptrdata,
and we need both. The first is the simple one: the prefix that can
contain pointers. The second is the number of bytes described by the
gcprog for the type. Recall that we describe the exact position of
pointers in a type using either a ptrmask or a gcprog. The ptrmask is
simpler, the gcprog uses less space. We use the gcprog for large
types, currently defined as types that are more than 2048 bytes. When
the Go 1.8 runtime expands a gcprog, it verifies that the gcprog
describes exactly the same number of bytes as the ptrdata field in the
type descriptor. If the last pointer-containing portion of a type is
an array, and if the elements of the array have a ptrdata that is less
than the size of the element type, then the simple definition of the
ptrdata will not include the final non-pointer-containing bytes of the
last element of the array. However, the gcprog will define the array
using a repeat count, and will therefore include the full size of the
last element of the array. So for a type that needs a gcprog, the
ptrdata field in the type descriptor must be the size of the data
described by the gcprog, and that is not necessarily the same as the
simple ptrdata.
It might seem that we can always use the gcprog version of the ptrdata
calculation, since that is what will appear in a type descriptor, but
it turns out that for global variables we always use a ptrmask, not a
gcprog, even if the global variable is large. This is because gcprogs
are handled by expanding them into a ptrmask at runtime, and for a
global variable there is no natural place to put the ptrmask. Simpler
to always use the ptrmask. That means that we need to describe the
size of the ptrmask, and that means that we need an expression for the
simple form of the ptrdata.
This CL implements the ptrdata calculation. This code is not actually
used yet. It will be used later when the Go 1.8 GC is committed.
Reviewed-on: https://go-review.googlesource.com/40573
commit 7a37331303b572412179a08141f1dd35339d40c8
Author: Ian Lance Taylor <iant@golang.org>
Date: Fri Apr 14 06:55:48 2017 -0700
compiler: zero length arrays never contain pointers
Reviewed-on: https://go-review.googlesource.com/40696
commit c242f0508a64d3d74a28d498cbaeda785ff76258
Author: Ian Lance Taylor <iant@golang.org>
Date: Fri Apr 14 07:26:54 2017 -0700
bytes: disable allocations test on gccgo
It turns out that testing.AllocsPerRun has not been producing correct
results with the current gccgo memory allocator. When we update to
the Go 1.8 memory allocator, testing.AllocsPerRun will work again, and
this test will fail due to lack of escape analysis.
Reviewed-on: https://go-review.googlesource.com/40700
commit 0dc369f1d63376a36bfb0999a1b0377fd444bfab
Author: Matthieu Sarter <matthieu.sarter.external@atos.net>
Date: Tue Apr 11 16:22:38 2017 +0200
os: alternative way to find executable path, using Args[0]
AIX does not provide a proper way to find the original
executable path from procfs, which contains just an
hardlink.
Executable path can be found using Args[0], Getcwd and
$PATH.
Issue golang/go#19200
Reviewed-on: https://go-review.googlesource.com/40353
commit f9bad1342569b338e3b2ea9f12ffc6d3d3fa3028
Author: Ian Lance Taylor <iant@golang.org>
Date: Fri Apr 14 08:01:19 2017 -0700
compiler: don't write struct with multiple sink fields to C header file
When writing a struct to the C header file used by the C runtime code,
a single sink field is fine: it will be called "_", which is valid C.
There are structs with single sink fields that we want to write out,
such as finblock. As it happens, though, the Go 1.8 runtime has a
struct with two sink fields, gcControllerState, which will produce a C
definition with two fields named "_", which will fail. Since we don't
need to know that struct in C, rather than fix the general case, just
punt if the struct has multiple sink fields.
After the conversion to the Go 1.8 GC, we may be able to get rid of
the C header file anyhow. I'm not sure yet.
Reviewed-on: https://go-review.googlesource.com/40701
commit cfc28901a572aeb15b2f10a38f79eec04c64dfb2
Author: Ian Lance Taylor <iant@golang.org>
Date: Fri Apr 14 10:07:23 2017 -0700
runtime: disable allocations test on gccgo
It turns out that testing.AllocsPerRun has not been producing correct
results with the current gccgo memory allocator. When we update to
the Go 1.8 memory allocator, testing.AllocsPerRun will work again, and
these tests will fail due to lack of escape analysis.
Reviewed-on: https://go-review.googlesource.com/40703
commit 36fedd76edaa48b9ec09709a70d9e4abaddf0caf
Author: Ian Lance Taylor <iant@golang.org>
Date: Fri Apr 14 10:47:06 2017 -0700
runtime: remove unused size argument from hash/equal fns
The size argument was removed from hash and equal functions in CL
34983. Somehow I missed removing them from three of the predefined
functions.
Reviewed-on: https://go-review.googlesource.com/40770
commit 90f6accb48d2e78cad8955b9292933f6ce3fe4c8
Author: Ian Lance Taylor <iant@golang.org>
Date: Fri Apr 14 13:23:05 2017 -0700
runtime: remove unused stack.go
We're never going to use stack.go for gccgo. Although a build tag
keeps it from being built, even having it around can be confusing.
Remove it.
Reviewed-on: https://go-review.googlesource.com/40774
commit befa71603fc66a214e01ac219f2bba36e19f136f
Author: Ian Lance Taylor <iant@golang.org>
Date: Fri Apr 14 13:18:34 2017 -0700
runtime: build fastlog
Take out the build tags which were preventing fastlog2 from being
built. It's used by the upcoming Go 1.8 GC.
Reviewed-on: https://go-review.googlesource.com/40773
commit b7e19e9be4ab4c3cd8f4c9506d79a8cd56bace40
Author: Ian Lance Taylor <iant@golang.org>
Date: Fri Apr 14 10:04:23 2017 -0700
runtime: add tests from Go 1.8
Some runtime package tests never made it into the gofrontend repo for
some reason. Add them now.
Reviewed-on: https://go-review.googlesource.com/40869
commit 1feef185aebd71bc2a09b9a04287461806096610
Author: Ian Lance Taylor <iant@golang.org>
Date: Mon Apr 17 16:26:11 2017 -0700
runtime: change mcall to take a Go function value
For future work in bringing in the Go 1.8 GC, change the mcall
function to take a Go function value, which means that mcall can take
a closure rather than just a straight C function pointer.
As part of this change move kickoff from C to Go, which we want to do
anyhow so that we run the write barriers that it generates.
Reviewed-on: https://go-review.googlesource.com/40935
commit c3db34f4efc2d610f74a01dd2ad7775f48889b29
Author: Matthieu Sarter <matthieu.sarter.external@atos.net>
Date: Tue Apr 11 16:11:26 2017 +0200
runtime: netpoll implementation for AIX
Code courtesy of Damien Bergamini from Atos Infogérance.
Issue golang/go#19200
Reviewed-on: https://go-review.googlesource.com/40352
commit f5634dff40e53ad9ce61afd67fd07334e3af9d1f
Author: Ian Lance Taylor <iant@golang.org>
Date: Tue Apr 18 22:06:07 2017 -0700
runtime: move mstart from Go to C
The assignments done in mstart must be done without write barriers, as
mstart is running without an m or p. In the gc toolchain the
equivalent code to intialize g and g->m is written in assembler;
on GNU/Linux, it's in the clone function.
Reviewed-on: https://go-review.googlesource.com/40989
commit 671d7c74592f4b6fe3665af279482ba0ea47ca2d
Author: Ian Lance Taylor <iant@golang.org>
Date: Tue Apr 18 17:47:28 2017 -0700
compiler: varargs slices do not escape in runtime
Also, don't try to allocate an empty slice on the stack, as it will
confuse the GCC backend.
Also add a few trivial style, code formatting, and debug output fixes.
Updates golang/go#17431
Reviewed-on: https://go-review.googlesource.com/40983
commit 94699d25f31353bf03419eda56b15993a39f3275
Author: Ian Lance Taylor <iant@golang.org>
Date: Tue Apr 18 17:30:09 2017 -0700
compiler: add Ptrmask_symbol_expression
Add an expression to evaluate to the ptrmask for a type. This will be
used for global variables, which always use a ptrmask no matter how
large they are.
Reviewed-on: https://go-review.googlesource.com/40981
commit bfff1654eac5b9288fa6c431e66cba8c9da6a660
Author: Ian Lance Taylor <iant@golang.org>
Date: Mon Apr 17 10:51:16 2017 -0700
runtime: change g's in systemstack
The systemstack function in the gc toolchain changes to a different g.
This is often used to get more stack space; the gofrontend uses a
different stack growth mechanism that does not require changing g's,
so we've been running with a version of systemstack that keeps the
same g. However, the garbage collector has various tests to verify
that it is running on g0 rather than on a normal g. For simplicity,
change the gofrontend version of systemstack to change to a different
g just as the gc toolchain does.
This permits us to uncomment some sanity checks in notetsleep.
Doing that requires us to fix up a couple of places where C code calls
{start,stop}TheWorldWithSema while not on g0.
Note that this does slow down some code in the runtime package unnecessarily.
It may be useful to find some places where the runtime calls
systemstack only to get more stack space and change it to use some
other function. That other function would act like systemstack in the
gc toolchain but simply call the argument in the gofrontend.
Reviewed-on: https://go-review.googlesource.com/40973
commit b2ccc7601ce71a7c5732154cf9b2eeea64681469
Author: Ian Lance Taylor <iant@golang.org>
Date: Wed Apr 19 10:36:12 2017 -0700
compiler, runtime: include ptrmask in GC roots
Change the list of registered GC roots to include a ptrmask,
and change the data structures to be easily used from Go code.
The new ptrmask will be used by the Go 1.8 GC to only scan pointers.
Tweak the current GC to use the new structures, but ignore the new
ptrmask information for now.
The new GC root data includes the size of the variable. The size is
not currently used, but will be used later by the cgo checking code.
Reviewed-on: https://go-review.googlesource.com/41075
commit 9e065149970bc180e4ca83bb99c74d9c4f43b47b
Author: Ian Lance Taylor <iant@golang.org>
Date: Wed Apr 19 12:23:16 2017 -0700
compiler, runtime: don't pass size to __go_new
There is no reason to pass the size to __go_new, as the type
descriptor includes the size anyhow. This makes the function
correspond to the Go 1.8 function runtime.newobject, which is what we
will use when we update to the Go 1.8 memory allocator.
Reviewed-on: https://go-review.googlesource.com/41080
commit c321de7b738c4a3387c1842919c9305acfa04c57
Author: Ian Lance Taylor <iant@golang.org>
Date: Wed Apr 19 13:13:56 2017 -0700
compiler, runtime, reflect: make type descriptors more like Go 1.8
Change the type descriptor structure to be more like the one in the Go
1.8 runtime. Specifically we add the ptrdata field, rename the gc
field to gcdata and change the type to *byte, and rearrange a few of
the fields. The structure is still not identical to the Go 1.8
structure--we don't use any of the tricks to reduce overall executable
size--but it is more similar.
For now we don't use the new ptrdata field, and the gcdata field is
still the old format rather than the new Go 1.8 ptrmask/gcprog format.
Reviewed-on: https://go-review.googlesource.com/41081
commit 7b70c52cddeebea9ebeac003f8c6aad59497e5f0
Author: Ian Lance Taylor <iant@golang.org>
Date: Wed Apr 19 14:54:29 2017 -0700
reflect: make sure to clear unusable hash/equal function
Otherwise we wind up copying the one from the prototype, which is wrong.
Also rewrite the hash/equal functions to look like the ones in Go 1.8,
mainly a matter of changing names and using arrayAt.
Reviewed-on: https://go-review.googlesource.com/41133
commit 84d26f467f7de8bdbb0d230458135fe1b6b2a99d
Author: Ian Lance Taylor <iant@golang.org>
Date: Wed Apr 19 14:59:13 2017 -0700
runtime: remove duplicate declarations of SetFinalizer/KeepAlive
These should have been removed in CL 38794. It's a bug that the
compiler even permits these duplicate declarations.
Reviewed-on: https://go-review.googlesource.com/41134
commit f85ff7e64c24031f6d0bd7c9c426b6176cb95160
Author: Ian Lance Taylor <iant@golang.org>
Date: Wed Apr 19 15:56:32 2017 -0700
runtime: don't crash if panicstring called with no m
It's possible for runtime_panicstring to be called with no m if a
signal handler, or scheduler innards, do something wrong. If that
happens carry on with the panic rather than crashing.
Reviewed-on: https://go-review.googlesource.com/41137
commit 5b362b04f642afb8b20715930416fc3b7d91bb12
Author: Than McIntosh <thanm@google.com>
Date: Fri Mar 31 14:35:48 2017 -0400
compiler: fix for expr sharing introduced by Order_eval::statement.
When processing an expression statement with a top-level call
that returns multiple results, Order_eval::statement can wind up
creating a tree that has multiple references to the same call,
which results in a confusing AST dump. Change the implementation
to avoid introducing this unwanted sharing.
Reviewed-on: https://go-review.googlesource.com/39210
commit b05b4260a68695bf9c9cc29e14ae86ca2699458a
Author: Ian Lance Taylor <iant@golang.org>
Date: Wed Apr 19 16:00:28 2017 -0700
runtime: restore correct m in gtraceback
If gtraceback is used to get a stack trace of a g running in the same m,
as can happen if we collect a stack trace from a g0, then restore the
old m value, don't clear it.
Reviewed-on: https://go-review.googlesource.com/41138
commit ca8bbf4dfac19b3f4f7ce21a688b96a418c75031
Author: Ian Lance Taylor <iant@golang.org>
Date: Wed Apr 19 16:03:24 2017 -0700
runtime: set startpc field when starting a new goroutine
This puts the right value in a trace--previously it was always zero.
Reviewed-on: https://go-review.googlesource.com/41139
commit ca8bbf4dfac19b3f4f7ce21a688b96a418c75031
Author: Ian Lance Taylor <iant@golang.org>
Date: Wed Apr 19 16:03:24 2017 -0700
runtime: set startpc field when starting a new goroutine
This puts the right value in a trace--previously it was always zero.
Reviewed-on: https://go-review.googlesource.com/41139
commit 887690dce42d7bf8f711f8ea082e4928fb70f2a5
Author: Ian Lance Taylor <iant@golang.org>
Date: Wed Apr 19 17:06:11 2017 -0700
runtime: add prefetch functions
The Go 1.8 GC uses prefetch functions. Add versions for gccgo that
call __builtin_prefetch. Uncomment the test for them in testAtomic64.
Don't force the check function to return early, as now taking the
address of a local variable in the runtime package does not force it
onto the heap.
Reviewed-on: https://go-review.googlesource.com/41144
commit 4269db69f9184e5a45c54aaee7352425a1f88bff
Author: Ian Lance Taylor <iant@golang.org>
Date: Wed Apr 19 17:55:21 2017 -0700
runtime: split up ticks to get correct alignment
On 32-bit x86 a uint64 variable by itself is aligned to an 8-byte boundary.
A uint64 field in a struct is aligned to a 4-byte boundary.
The runtime.ticks variable has a uint64 field that must be aligned
to an 8-byte boundary. Rather than rely on luck, split up the struct
into separate vars so that the required alignment happens reliably.
It would be much nicer if issue golang/go#19057 were fixed somehow,
but that is for another day.
Reviewed-on: https://go-review.googlesource.com/41143
commit 66926cabdbdbf3431b4f172f7756e195c1c6c513
Author: Matthieu Sarter <matthieu.sarter.external@atos.net>
Date: Thu Apr 20 17:15:38 2017 +0200
libgo: fix bad value for O_CLOEXEC on AIX 7.1
On AIX 7.1, O_CLOEXEC is defined as 0x0000001000000000, which
creates an integer constant overflow error when building libgo.
This affects only 7.1, O_CLOEXEC is not defined on 6.1 (and
defaults to O in sysinfo.go) and is defined as 0x00800000 on
AIX 7.2.
Issue golang/go#19200
Reviewed-on: https://go-review.googlesource.com/41214
commit af288ff10aeafc47651f5def327ed56425d5be19
Author: Ian Lance Taylor <iant@golang.org>
Date: Thu Apr 20 17:15:02 2017 -0700
runtime: preserve stack context in tracebackothers
The tracebackothers function works by saving the current stack context
in the goroutine's context field and then calling gogo to switch to a
new goroutine. The new goroutine will collect its own stack trace and
then call gogo to switch back to the original goroutine. This works
fine, but if the original goroutine was called by mcall then the
contents of its context field are needed to return from the mcall.
Fix this by saving the stack context across the calls to the other
goroutines.
Reviewed-on: https://go-review.googlesource.com/41293
commit 43101e5956e793f1b4de05c15d7738c785e927df
Author: Matthieu Sarter <matthieu.sarter.external@atos.net>
Date: Fri Apr 21 10:58:52 2017 +0200
os/user: use _posix_* libc functions
libc getpwnam_r function has a different signature, we must use
_posix_getpwnam_r instead (by default, the pwd.h system include
file defines getpwnam_r as a static function calling
_posix_getpwnam_r, so a C program calling getpwnam_r will indeed
reference the _posix_getpwnam_r symbol).
Idem for getpwuid_r, getgrnam_r and getgrgid_r.
Issue golang/go#19200
Reviewed-on: https://go-review.googlesource.com/41334
commit 71e1fec4d2a536591ea6657a06916a17b5127071
Author: Ian Lance Taylor <iant@golang.org>
Date: Wed Apr 19 21:24:48 2017 -0700
runtime: don't use pointers in g_ucontext_t or stackcontext
The g_ucontext_t type holds registers saved for a goroutine. We have
to scan it for pointers, but since registers don't necessarily hold
pointers we have to scan it conservatively. That means that it should
not have a pointer type, since the GC will always scan pointers.
Instead it needs special treatment to be scanned conservatively.
The current GC doesn't care when a pointer type holds a non-pointer,
but the Go 1.8 GC does.
For the current GC this means we have to explicitly scan the
g_ucontext_t values in a G.
While we're at it change stackcontext to be uintptr too. The entries
in stackcontext never hold pointers that the Go GC cares about.
Reviewed-on: https://go-review.googlesource.com/41270
commit eab2960aee91d3e3a6baa5b1bce01262d24c714f
Author: Ian Lance Taylor <iant@golang.org>
Date: Thu Apr 20 17:08:19 2017 -0700
runtime/internal/sys: define Goexperiment
The gc toolchain defines Goexperiment based on the environment
variable GOEXPERIMENT when the toolchain is built. We just always set
Goexperiment to the empty string.
Reviewed-on: https://go-review.googlesource.com/41292
commit be4a751943265c0637da859d15a4faf162f5c478
Author: Matthieu Sarter <matthieu.sarter.external@atos.net>
Date: Thu Apr 20 14:04:35 2017 +0200
net: sockopt implementation for AIX
This is a copy of the Linux implementation, it allows to
run some simple client/server applications on AIX, while
the current sockopt stubs don't.
Issue golang/go#19200
Reviewed-on: https://go-review.googlesource.com/41213
commit 46a669c4ca5b80fd6f6a0a42095804d9f704611d
Author: Matthieu Sarter <matthieu.sarter.external@atos.net>
Date: Wed Mar 29 17:55:06 2017 +0200
math: fix sign for atan/expm1/log1p(-0)
AIX libc returns +0 for atan(-0), expm1(-0) and log1p(-0),
while matching Go functions must return -0.
Code courtesy of Tony Reix.
Issue golang/go#19200
Reviewed-on: https://go-review.googlesource.com/38699
commit 53b0e809130038a46f0a3d2870e3905f44ab888d
Author: Matthieu Sarter <matthieu.sarter.external@atos.net>
Date: Wed Apr 26 17:29:22 2017 +0200
runtime: fix context clobbering on AIX
On AIX 64-bits, r13 is a pointer to thread data.
setcontext() overwrites r13 with the value saved by getcontext().
So, when a goroutine is scheduled on a new thread, r13 will point
to the old thread data after calling setcontext().
Code courtesy of Damien Bergamini.
Issue golang/go#19200
Reviewed-on: https://go-review.googlesource.com/41854
commit f8d5ebd71c71e6e777200530d8204b92619157f8
Author: Matthieu Sarter <matthieu.sarter.external@atos.net>
Date: Wed Apr 26 18:01:19 2017 +0200
runtime: fix wrong time calculation in semasleep
tv_nsec is added twice when calculating the sleep end time.
Issue golang/go#19200
Reviewed-on: https://go-review.googlesource.com/41855
commit ef56097f4ea848d48fbf61eba1c757fe7fce99d3
Author: Matthieu Sarter <matthieu.sarter.external@atos.net>
Date: Fri Apr 28 10:27:32 2017 +0200
libgo: pass $(NM) value when running benchmarks
On AIX, we need to use "nm -B" instead of "nm", to have the
epxected output format, so the configured $(NM) value from
the Makefile should be exported before running gotest, which
defaults to "nm" if $NM is not set.
Issue golang/go#19200
Reviewed-on: https://go-review.googlesource.com/42051
commit 0fb550083ae474fb964435927b899ec8e4b62771
Author: Ian Lance Taylor <iant@golang.org>
Date: Wed Nov 16 21:12:53 2016 -0800
runtime: copy garbage collector from Go 1.8 runtime
This giant patch replaces the old Go 1.4 memory allocator and garbage
collector with the new Go 1.8 code. The memory allocator is fairly
similar, though now written in Go rather than C. The garbage
collector is completely different. It now uses ptrmask and gcprog
information, which requires changes in the compiler and the reflect
package as well as the runtime. And, of course, the garbage collector
now runs concurrently with program execution.
In the gc toolchain the garbage collector is strict and precise at all
levels. In the gofrontend we do not have stack maps, so stacks, and
register values, are collected conservatively. That means that an
old, no longer used, pointer on a stack or in a register can cause a
memory object to live longer than it should. That in turns means that
we must disable some checks for invalid pointers in the garbage
collection code. Not only can we get an invalid pointer on the stack;
the concurrent nature of the collector means that we can in effect
resurrect a block that was already unmarked but that the collector had
not yet gotten around to freeing, and that block can in turn point to
other blocks that the collector had managed to already free. So we
must disable pointer checks in general. In effect we are relying on
the fact that the strict pointer checks in the gc toolchain ensure
that the garbage collector is correct, and we just assume that it is
correct for the gofrontend since we are using the same code.
Reviewed-on: https://go-review.googlesource.com/41307
commit a95078d501175240d095500a8c5fbfb21bec65cb
Author: Ian Lance Taylor <iant@golang.org>
Date: Mon Apr 24 16:33:47 2017 -0700
libgo/Makefile: clean more files
Fix up the mostlyclean, clean, and distclean targets to better follow
https://www.gnu.org/prep/standards/html_node/Standard-Targets.html.
Reviewed-on: https://go-review.googlesource.com/41625
commit 5956bf1055451cf4239cdfeca259c23b1ded54d8
Author: Ian Lance Taylor <iant@golang.org>
Date: Mon May 8 13:35:11 2017 -0700
libgo: delete goc2c
The last .goc file has been removed, so remove goc2c.
The goc2c program was my first contribution to the gc repository that
was more than 100 lines:
2b57a1124e
The program was used in gc for a few years under various guises but
was finally removed in https://golang.org/cl/132680043. Now we can
remove it from gofrontend as well.
Reviewed-on: https://go-review.googlesource.com/42911
commit a222e35d041de0cd42506b61c93b8209e07702b9
Author: Than McIntosh <thanm@google.com>
Date: Tue May 9 10:33:10 2017 -0400
compiler: set "need_init_fn" when adding gc root
Variables that back slice initializers in certain cases have to be
added to the gc roots list, since they can be modified at runtime. The
code that was doing this addition did not update the flag that tracks
whether the package being compiled needs an initializer function,
which resulted in the call in question being left out of the final
generated code in certain cases. Fix is to change Gogo::add_gc_root()
to update the "needs init" flag.
Reviewed-on: https://go-review.googlesource.com/43030
commit 822ab419bf7d1c705cdce1c12133e7a11f56be2e
Author: Than McIntosh <thanm@google.com>
Date: Tue May 9 11:36:51 2017 -0400
compiler: fix variable context nit in write barrier generation
Update the write barrier generation code to insure that the "lvalue
context" tag on the space var expression is set only in the case where
the expr feeds directly into an assignment. This is somewhat
counter-intuitive, but needed in the case where the backend looks at
context tags.
Reviewed-on: https://go-review.googlesource.com/43031
From-SVN: r247848
PR go/77857
cmd/go: generate vendor paths for -I arg on compile
This change generates the vendor path to be used with -I
on a gccgo compile to find imports from the vendor directories.
Fixesgolang/go#15628
Reviewed-on: https://go-review.googlesource.com/39590
From-SVN: r246864
PR go/80302
time: make the ParseInLocation test more robust
This is a backport of https://golang.org/cl/37964 from the gc toolchain.
Original description:
The tzdata 2017a update (2017-02-28) changed the abbreviation of the
Asia/Baghdad time zone (used in TestParseInLocation) from 'AST' to the
numeric '+03'.
Update the test so that it skips the checks if we're using a recent
tzdata release.
Updates golang/go#19457
Fixes GCC PR 80302.
Reviewed-on: https://go-review.googlesource.com/39470
From-SVN: r246695
The use of &[1]uintptr{fn} was causing sigfwd to allocate memory, even
though it is being compiled for the runtime package. That is a bad
idea for this function, which is invoked by a signal handler. Rewrite
it to use only constructs that do not allocate memory when compiled
for the runtime package.
The test for this is misc/cgo/testcarchive in the main repo, which we
don't yet test.
Reviewed-on: https://go-review.googlesource.com/37454
From-SVN: r245777
The quoting was causing us to never add the system-specific signals.
The test for this is misc/cgo/testcarchive in the master repo, which
we don't yet run for gccgo.
Reviewed-on: https://go-review.googlesource.com/37453
From-SVN: r245776
Along with the update this fixes a problem that was always present but
only showed up with the new reflect test. When a program used a
**unsafe.Pointer and stored the value in an interface type, the
generated type descriptor pointed to the GC data for *unsafe.Pointer.
It did that by name, but we were not generating a variable with the
right name.
Reviewed-on: https://go-review.googlesource.com/37144
From-SVN: r245535
When I updated to Go 1.8, the initsig function moved from
signal1_unix.go to signal_unix.go, and lost a gccgo-specific change in
the move. Add it back.
This would have been caught by the misc/cgo/testcarchive tests in the
gc repository, but we don't run those in the gccgo repository. We
should fix that, somehow.
Reviewed-on: https://go-review.googlesource.com/35839
From-SVN: r244947
I typoed the argument passed to getcontext in getTraceback, and the
error was hidden by ucontext_arg. This would have been caught by some
of the runtime package tests, but we don't run most of them because
they rely on `go build`, and the go tool is not available while
running the libgo testsuite. We should fix the libgo testsuite,
somehow, so that they run.
Reviewed-on: https://go-review.googlesource.com/35837
From-SVN: r244946
Fix a bug in the generation of the hash value in reflect.FuncOf.
The merge script missed a bunch of testdata files over the years.
Copy them over.
Reviewed-on: https://go-review.googlesource.com/35570
From-SVN: r244835
PR go/79037
compiler, runtime: align gc data for m68k
The current GC requires that the gc data be aligned to at least a 4
byte boundary, because it uses the lower two bits of the address for
flags (see LOOP and PRECISE in runtime/mgc0.c). As the gc data is
stored as a [...]uintptr, that is normally always true. However, on
m68k, that only guarantees 2 byte alignment. Fix it by forcing the
alignment.
The parfor code used by the current GC requires that the parfor data
be aligned to at least an 8 byte boundary. The code in parfor.c
verifies this. This is normally true, as the data uses uint64_t
values, but, again, this must be enforced explicitly on m68k.
Fixes GCC PR 79037.
Reviewed-on: https://go-review.googlesource.com/35478
From-SVN: r244824
Some fixes that permit misc/cgo/test in the master gc repository to
pass using the current gccgo.
Install testing/internal/testdeps.gox; it is needed by `go test`.
Export runtime.lockedOSThread to enable calling via go:linkname; it is
used by misc/cgo/test.
Loop on EAGAIN when creating a new thread; this is what the gc code
does, and misc/cgo/test tests that it works.
Reviewed-on: https://go-review.googlesource.com/35479
From-SVN: r244733
PR go/79146
math/big: fix build on s390x
Don't build arith_decl_s390x.go for gccgo; it is only for assembly
code that has not yet been ported to gccgo.
For GCC PR 79146.
From-SVN: r244731
PR go/79146
crypto/elliptic: explicitly ignore p256_s390x.go
The file only works if used in conjunction with assembly code not
(yet) written for gccgo.
Fixes GCC PR 79146.
Reviewed-on: https://go-review.googlesource.com/35477
From-SVN: r244679
Since the name siginfo winds up in runtime.inc, this avoids a name
collision on systems that define "struct siginfo" in the system header
files.
Reviewed-on: https://go-review.googlesource.com/35239
From-SVN: r244484
Compiler changes:
* Change map assignment to use mapassign and assign value directly.
* Change string iteration to use decoderune, faster for ASCII strings.
* Change makeslice to take int, and use makeslice64 for larger values.
* Add new noverflow field to hmap struct used for maps.
Unresolved problems, to be fixed later:
* Commented out test in go/types/sizes_test.go that doesn't compile.
* Commented out reflect.TestStructOf test for padding after zero-sized field.
Reviewed-on: https://go-review.googlesource.com/35231
gotools/:
Updates for Go 1.8rc1.
* Makefile.am (go_cmd_go_files): Add bug.go.
(s-zdefaultcc): Write defaultPkgConfig.
* Makefile.in: Rebuild.
From-SVN: r244456
I looked at a diff of proc.go between Go 1.7 and gccgo, and copied
over all the easy stuff.
Reviewed-on: https://go-review.googlesource.com/35090
From-SVN: r244291
Drop the size arguments for the hash/equal functions stored in type
descriptors. Types know what size they are. To make this work,
generate hash/equal functions for types that can use an identity
comparison but are not a standard size and alignment.
Drop the multiplications by 33 in the generated hash code and the
reflect package hash code. They are not necessary since we started
passing a seed value around, as the seed includes the hash of the
earlier values.
Copy the algorithms for standard types from the Go 1.7 runtime,
replacing the C functions.
Reviewed-on: https://go-review.googlesource.com/34983
From-SVN: r244256
This started by moving procresize from C to Go so that we can pass the
right type to the memory allocator when allocating a p, which forced
the gomaxprocs variable to move from C to Go, and everything else
followed from that.
Reviewed-on: https://go-review.googlesource.com/34916
From-SVN: r244236
PR go/78978
libgo: build with -Wa,-nH if possible on Solaris
By default the Solaris assembler records the required hardware
capability in the object file. This means that the AES hashing code
breaks on systems that do not support AES, even though the code uses a
runtime check to only actually invoke the AES instructions on systems
that support it. An earlier fix for the problem only fixed the shared
library, not the static libgo.a. Fix the problem for real by using an
assembler option to not record the hardware capability.
For GCC PR 78978.
Patch by Rainer Orth.
Reviewed-on: https://go-review.googlesource.com/34910
From-SVN: r244165
PR go/78789
runtime: don't build aeshash.c if the assembler doesn't support it
This is for CentOS 5, whose assembler does not know the aesinc
instruction.
Fixes GCC PR 78789.
Patch by Uros Bizjak.
Reviewed-on: https://go-review.googlesource.com/34796
From-SVN: r244031
Remove support for _cgo_allocate. It was removed from the gc
toolchain in Go 1.5, so it is unlikely that anybody is trying to use it.
Reviewed-on: https://go-review.googlesource.com/34557
From-SVN: r243805
Don't put m[0-4] in runtime.inc.
Pass -mclear-hwcap to the linker if supported.
From Rainer Orth.
Reviewed-on: https://go-review.googlesource.com/34331
From-SVN: r243619