gcc/libcpp/po/zh_TW.po

# Traditional Chinese translation for cpplib.
# Copyright (C) 2005 Free Software Foundation, Inc.
# This file is distributed under the same license as the cpplib package.
# Meng Jie <zuxyhere@eastday.com>, 2005.
# Wei-Lun Chao <chaoweilun@pcmail.com.tw>, 2006.
#
msgid ""
msgstr ""
"Project-Id-Version: cpplib 4.1.0\n"
"Report-Msgid-Bugs-To: http://gcc.gnu.org/bugs.html\n"
"POT-Creation-Date: 2007-11-08 21:08+0000\n"
"PO-Revision-Date: 2006-03-09 12:37+0800\n"
"Last-Translator: Wei-Lun Chao <chaoweilun@pcmail.com.tw>\n"
"Language-Team: Chinese (traditional) <zh-l10n@linux.org.tw>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=1; plural=0;\n"

#: charset.c:654
#, c-format
msgid "conversion from %s to %s not supported by iconv"
msgstr "iconv 不支援從 %s 到 %s 的轉換"

#: charset.c:657
msgid "iconv_open"
msgstr "iconv_open"

#: charset.c:665
#, c-format
msgid "no iconv implementation, cannot convert from %s to %s"
msgstr "沒有實作 iconv，無法從 %s 轉換到 %s"

#: charset.c:742
#, c-format
msgid "character 0x%lx is not in the basic source character set\n"
msgstr "字元 0x%lx 不在基本來源字元集中\n"

#: charset.c:759 charset.c:1352
msgid "converting to execution character set"
msgstr "轉換到可執行檔案的字元集"

#: charset.c:765
#, c-format
msgid "character 0x%lx is not unibyte in execution character set"
msgstr "字元 0x%lx 在執行字元集中不是單位元組的"

#: charset.c:889
#, c-format
msgid "Character %x might not be NFKC"
msgstr "字元 %x 可能不是 NFKC"

#: charset.c:949
msgid "universal character names are only valid in C++ and C99"
msgstr "萬國碼字元名稱只在 C++ 和 C99 中有效"

#: charset.c:952
#, c-format
msgid "the meaning of '\\%c' is different in traditional C"
msgstr "「\\%c」的意義與在傳統 C 中不同"

#: charset.c:961
msgid "In _cpp_valid_ucn but not a UCN"
msgstr "在 _cpp_valid_ucn 中並不是一個 UCN"

#: charset.c:986
#, c-format
msgid "incomplete universal character name %.*s"
msgstr "不完整的萬國碼字元名稱 %.*s"

#: charset.c:998
#, c-format
msgid "%.*s is not a valid universal character"
msgstr "%.*s 不是一個有效的萬國碼字元"

#: charset.c:1008 lex.c:484
msgid "'$' in identifier or number"
msgstr "「$」出現在識別字或數字中"

#: charset.c:1018
#, c-format
msgid "universal character %.*s is not valid in an identifier"
msgstr "萬國碼字元 %.*s 在識別字中無效"

#: charset.c:1022
#, c-format
msgid "universal character %.*s is not valid at the start of an identifier"
msgstr "萬國碼字元 %.*s 在識別字開頭無效"

#: charset.c:1056 charset.c:1571
msgid "converting UCN to source character set"
msgstr "將 UCN 轉換到來源字元集"

#: charset.c:1060
msgid "converting UCN to execution character set"
msgstr "將 UCN 轉換到執行字元集"

#: charset.c:1132
msgid "the meaning of '\\x' is different in traditional C"
msgstr "「\\x」的意義與在傳統 C 中不同"

#: charset.c:1149
msgid "\\x used with no following hex digits"
msgstr "\\x 後沒有十六進位數字"

#: charset.c:1156
msgid "hex escape sequence out of range"
msgstr "十六進位逸出序列越界"

#: charset.c:1195
msgid "octal escape sequence out of range"
msgstr "八進位逸出序列越界"

#: charset.c:1263
msgid "the meaning of '\\a' is different in traditional C"
msgstr "「\\a」的意義與在傳統 C 中不同"

#: charset.c:1270
#, c-format
msgid "non-ISO-standard escape sequence, '\\%c'"
msgstr "非 ISO 標準的逸出序列，「\\%c」"

#: charset.c:1278
#, c-format
msgid "unknown escape sequence '\\%c'"
msgstr "不明的逸出序列：「\\%c」"

#: charset.c:1286
#, c-format
msgid "unknown escape sequence: '\\%s'"
msgstr "不明的逸出序列：「\\%s」"

#: charset.c:1293
msgid "converting escape sequence to execution character set"
msgstr "將逸出序列轉換到執行字元集"

#: charset.c:1415 charset.c:1478
msgid "character constant too long for its type"
msgstr "字元常數大小超出其類型"

#: charset.c:1418
msgid "multi-character character constant"
msgstr "多位元組字元常數"

#: charset.c:1510
msgid "empty character constant"
msgstr "空的字元常數"

#: charset.c:1612
#, c-format
msgid "failure to convert %s to %s"
msgstr "無法從 %s 轉換到 %s"

#: directives.c:215 directives.c:241
#, c-format
msgid "extra tokens at end of #%s directive"
msgstr "#%s 指令的末尾有多餘的符記"

#: directives.c:344
#, c-format
msgid "#%s is a GCC extension"
msgstr "#%s 是 GCC 擴充功能"

#: directives.c:356
msgid "suggest not using #elif in traditional C"
msgstr "建議在傳統 C 中不要使用 #elif"

#: directives.c:359
#, c-format
msgid "traditional C ignores #%s with the # indented"
msgstr "當 # 有縮排時傳統 C 忽略 #%s"

#: directives.c:363
#, c-format
msgid "suggest hiding #%s from traditional C with an indented #"
msgstr "建議使用縮排的 # 以讓 #%s 對傳統 C 不可見"

#: directives.c:389
msgid "embedding a directive within macro arguments is not portable"
msgstr "將一個指令內嵌於巨集參數中是不可移植的"

#: directives.c:409
msgid "style of line directive is a GCC extension"
msgstr "line 指令的風格是 GCC 擴充功能"

#: directives.c:464
#, c-format
msgid "invalid preprocessing directive #%s"
msgstr "無效的預先處理指令 #%s"

#: directives.c:532
msgid "\"defined\" cannot be used as a macro name"
msgstr "「defined」不能做為巨集名"

#: directives.c:538
#, c-format
msgid "\"%s\" cannot be used as a macro name as it is an operator in C++"
msgstr "「%s」不能做為巨集名，因為它是 C++ 中的一個運算子"

#: directives.c:541
#, c-format
msgid "no macro name given in #%s directive"
msgstr "#%s 指令中未給出巨集名"

#: directives.c:544
msgid "macro names must be identifiers"
msgstr "巨集名必須是識別字"

#: directives.c:585
#, c-format
msgid "undefining \"%s\""
msgstr "取消對「%s」的定義"

#: directives.c:640
msgid "missing terminating > character"
msgstr "缺少結尾的 > 字元"

#: directives.c:695
#, c-format
msgid "#%s expects \"FILENAME\" or <FILENAME>"
msgstr "#%s 需要 \"FILENAME\" 或 <FILENAME>"

#: directives.c:739
#, c-format
msgid "empty filename in #%s"
msgstr "#%s 中檔案名稱為空"

#: directives.c:749
msgid "#include nested too deeply"
msgstr "#include 巢狀過深"

#: directives.c:790
msgid "#include_next in primary source file"
msgstr "#include_next 出現在主來源檔案中"

#: directives.c:816
#, c-format
msgid "invalid flag \"%s\" in line directive"
msgstr "line 指令中有無效的標記「%s」"

#: directives.c:868
#, c-format
msgid "\"%s\" after #line is not a positive integer"
msgstr "#line 後的「%s」不是一個正整數"

#: directives.c:874
msgid "line number out of range"
msgstr "列號超出範圍"

#: directives.c:887 directives.c:964
#, c-format
msgid "\"%s\" is not a valid filename"
msgstr "「%s」不是一個有效的檔案名稱"

#: directives.c:924
#, c-format
msgid "\"%s\" after # is not a positive integer"
msgstr "# 後的「%s」不是一個正整數"

#: directives.c:1026
#, c-format
msgid "invalid #%s directive"
msgstr "無效的 #%s 指令"

#: directives.c:1089
#, c-format
msgid "registering pragmas in namespace \"%s\" with mismatched name expansion"
msgstr ""

#: directives.c:1098
#, fuzzy, c-format
msgid "registering pragma \"%s\" with name expansion and no namespace"
msgstr "「%s」既被註冊為一個 pragma 又被註冊為一個 pragma 命名空間"

#: directives.c:1116
#, c-format
msgid "registering \"%s\" as both a pragma and a pragma namespace"
msgstr "「%s」既被註冊為一個 pragma 又被註冊為一個 pragma 命名空間"

#: directives.c:1119
#, c-format
msgid "#pragma %s %s is already registered"
msgstr "#pragma %s %s 已經被註冊"

#: directives.c:1122
#, c-format
msgid "#pragma %s is already registered"
msgstr "#pragma %s 已經被註冊"

#: directives.c:1152
msgid "registering pragma with NULL handler"
msgstr ""

#: directives.c:1362
msgid "#pragma once in main file"
msgstr "#pragma once 出現在主檔案中"

#: directives.c:1385
msgid "invalid #pragma GCC poison directive"
msgstr "無效的 #pragma GCC poison 指令"

#: directives.c:1394
#, c-format
msgid "poisoning existing macro \"%s\""
msgstr "對已存在的巨集「%s」加料"

#: directives.c:1413
msgid "#pragma system_header ignored outside include file"
msgstr "#pragma system_header 在包含檔案外被忽略"

#: directives.c:1437
#, c-format
msgid "cannot find source file %s"
msgstr "找不到來源檔案 %s"

#: directives.c:1441
#, c-format
msgid "current file is older than %s"
msgstr "目前檔案早於 %s"

#: directives.c:1620
msgid "_Pragma takes a parenthesized string literal"
msgstr "_Pragma 需要一個括起的字串原文"

#: directives.c:1693
msgid "#else without #if"
msgstr "#else 沒有匹配的 #if"

#: directives.c:1698
msgid "#else after #else"
msgstr "#else 出現在 #else 後"

#: directives.c:1700 directives.c:1733
msgid "the conditional began here"
msgstr "條件自此開始"

#: directives.c:1726
msgid "#elif without #if"
msgstr "#elif 沒有匹配的 #if"

#: directives.c:1731
msgid "#elif after #else"
msgstr "#elif 出現在 #else 後"

#: directives.c:1761
msgid "#endif without #if"
msgstr "#endif 沒有匹配的 #if"

#: directives.c:1838
msgid "missing '(' after predicate"
msgstr "述語後缺少「(」"

#: directives.c:1853
msgid "missing ')' to complete answer"
msgstr "完整的答案缺少「)」"

#: directives.c:1873
msgid "predicate's answer is empty"
msgstr "述語的答案為空"

#: directives.c:1900
msgid "assertion without predicate"
msgstr "判定語後沒有述語"

#: directives.c:1902
msgid "predicate must be an identifier"
msgstr "述語必須是一個識別字"

#: directives.c:1988
#, c-format
msgid "\"%s\" re-asserted"
msgstr "已再判定「%s」"

#: directives.c:2271
#, c-format
msgid "unterminated #%s"
msgstr "未終止的 #%s"

#: directives-only.c:221 lex.c:1016 traditional.c:162
msgid "unterminated comment"
msgstr "未終結的註釋"

#: errors.c:118
msgid "warning: "
msgstr "警告："

#: errors.c:120
msgid "internal error: "
msgstr "內部錯誤："

#: errors.c:122
msgid "error: "
msgstr "錯誤："

#: errors.c:186
msgid "stdout"
msgstr "stdout"

#: errors.c:188
#, c-format
msgid "%s: %s"
msgstr "%s：%s"

#: expr.c:261
msgid "too many decimal points in number"
msgstr "數字中有太多小數點"

#: expr.c:290 expr.c:365
#, fuzzy
msgid "fixed-point constants are a GCC extension"
msgstr "虛數常數是一個 GCC 擴充功能"

#: expr.c:303
#, fuzzy, c-format
msgid "invalid digit \"%c\" in binary constant"
msgstr "八進位常數中有無效字元「%c」"

#: expr.c:305
#, c-format
msgid "invalid digit \"%c\" in octal constant"
msgstr "八進位常數中有無效字元「%c」"

#: expr.c:313
#, fuzzy
msgid "invalid prefix \"0b\" for floating constant"
msgstr "浮點常數的「%.*s」字尾無效"

#: expr.c:319
msgid "use of C99 hexadecimal floating constant"
msgstr "使用 C99 式的十六進位浮點常數"

#: expr.c:328
msgid "exponent has no digits"
msgstr "指數部分沒有數字"

#: expr.c:335
msgid "hexadecimal floating constants require an exponent"
msgstr "十六進位浮點常數需要指數部分"

#: expr.c:341
#, c-format
msgid "invalid suffix \"%.*s\" on floating constant"
msgstr "浮點常數的「%.*s」字尾無效"

#: expr.c:351 expr.c:393
#, c-format
msgid "traditional C rejects the \"%.*s\" suffix"
msgstr "傳統 C 不接受「%.*s」字尾"

#: expr.c:358
#, fuzzy, c-format
msgid "invalid suffix \"%.*s\" with hexadecimal floating constant"
msgstr "浮點常數的「%.*s」字尾無效"

#: expr.c:369
#, fuzzy
msgid "decimal float constants are a GCC extension"
msgstr "虛數常數是一個 GCC 擴充功能"

#: expr.c:379
#, c-format
msgid "invalid suffix \"%.*s\" on integer constant"
msgstr "整數常數的「%.*s」字尾無效"

#: expr.c:401
msgid "use of C99 long long integer constant"
msgstr "使用 C99 long long 整數常數"

#: expr.c:409
msgid "imaginary constants are a GCC extension"
msgstr "虛數常數是一個 GCC 擴充功能"

#: expr.c:412
#, fuzzy
msgid "binary constants are a GCC extension"
msgstr "虛數常數是一個 GCC 擴充功能"

#: expr.c:505
msgid "integer constant is too large for its type"
msgstr "整數常數值超出其類型"

#: expr.c:517
msgid "integer constant is so large that it is unsigned"
msgstr "整數常數太大，認定為 unsigned"

#: expr.c:612
msgid "missing ')' after \"defined\""
msgstr "「defined」 後缺少「)」"

#: expr.c:619
msgid "operator \"defined\" requires an identifier"
msgstr "運算子「defined」需要一個識別字"

#: expr.c:627
#, c-format
msgid "(\"%s\" is an alternative token for \"%s\" in C++)"
msgstr "(在 C++ 中「%s」會是「%s」的替代識別字)"

#: expr.c:637
msgid "this use of \"defined\" may not be portable"
msgstr "使用「defined」可能不利於移植"

#: expr.c:676
msgid "floating constant in preprocessor expression"
msgstr "浮點常數出現在預先處理運算式中"

#: expr.c:682
msgid "imaginary number in preprocessor expression"
msgstr "預先處理運算式中出現虛數"

#: expr.c:727
#, c-format
msgid "\"%s\" is not defined"
msgstr "「%s」未定義"

#: expr.c:855 expr.c:884
#, c-format
msgid "missing binary operator before token \"%s\""
msgstr "識別字「%s」前缺少二元運算子"

#: expr.c:875
#, c-format
msgid "token \"%s\" is not valid in preprocessor expressions"
msgstr "識別字「%s」在預先處理運算式中無效"

#: expr.c:892
msgid "missing expression between '(' and ')'"
msgstr "「(」與「)」之間缺少運算式"

#: expr.c:895
msgid "#if with no expression"
msgstr "#if 後沒有運算式"

#: expr.c:898
#, c-format
msgid "operator '%s' has no right operand"
msgstr "運算子「%s」沒有右運算元"

#: expr.c:903
#, c-format
msgid "operator '%s' has no left operand"
msgstr "運算子「%s」沒有左運算元"

#: expr.c:929
msgid " ':' without preceding '?'"
msgstr "「:」前沒有「?」"

#: expr.c:956
msgid "unbalanced stack in #if"
msgstr "#if 中不平衡的堆疊"

#: expr.c:975
#, c-format
msgid "impossible operator '%u'"
msgstr "不可能的運算子「%u」"

#: expr.c:1065
msgid "missing ')' in expression"
msgstr "運算式中缺少「)」"

#: expr.c:1086
msgid "'?' without following ':'"
msgstr "「?」後沒有「:」"

#: expr.c:1096
msgid "integer overflow in preprocessor expression"
msgstr "預先處理運算式中整數溢出"

#: expr.c:1101
msgid "missing '(' in expression"
msgstr "運算式中缺少「(」"

#: expr.c:1133
#, c-format
msgid "the left operand of \"%s\" changes sign when promoted"
msgstr "「%s」的左運算元在提升時變換了符號"

#: expr.c:1138
#, c-format
msgid "the right operand of \"%s\" changes sign when promoted"
msgstr "「%s」的右運算元在提升時變換了符號"

#: expr.c:1397
msgid "traditional C rejects the unary plus operator"
msgstr "傳統 C 不接受單元 + 運算子"

#: expr.c:1480
msgid "comma operator in operand of #if"
msgstr "#if 運算元中出現逗號"

#: expr.c:1612
msgid "division by zero in #if"
msgstr "#if 中用零做除數"

#: files.c:442
msgid "NULL directory in find_file"
msgstr "find_file 中有 NULL 目錄"

#: files.c:480
msgid "one or more PCH files were found, but they were invalid"
msgstr "找到一個或多個 PCH 檔案，但它們是無效的"

#: files.c:483
msgid "use -Winvalid-pch for more information"
msgstr "使用 -Winvalid-pch 以獲得更多資訊"

#: files.c:570
#, c-format
msgid "%s is a block device"
msgstr "%s 是一個區塊裝置"

#: files.c:587
#, c-format
msgid "%s is too large"
msgstr "%s 過大"

#: files.c:622
#, c-format
msgid "%s is shorter than expected"
msgstr "%s 短於預期"

#: files.c:852
#, c-format
msgid "no include path in which to search for %s"
msgstr "沒有包含路徑可供搜尋 %s"

#: files.c:1157
msgid "Multiple include guards may be useful for:\n"
msgstr "多個防止重包含可能對其有用：\n"

#: init.c:426
msgid "cppchar_t must be an unsigned type"
msgstr "cppchar_t 必須是無號類型"

#: init.c:430
#, c-format
msgid "preprocessor arithmetic has maximum precision of %lu bits; target requires %lu bits"
msgstr "預先處理算術的最高精度為 %lu 位；目標需要 %lu 位"

#: init.c:437
msgid "CPP arithmetic must be at least as precise as a target int"
msgstr "CPP 算術必須至少具有目標 int 的精度"

#: init.c:440
msgid "target char is less than 8 bits wide"
msgstr "目標 char 短於 8 位"

#: init.c:444
msgid "target wchar_t is narrower than target char"
msgstr "目標 wchar_t 短於目標 char"

#: init.c:448
msgid "target int is narrower than target char"
msgstr "目標 int 短於目標 char"

#: init.c:453
msgid "CPP half-integer narrower than CPP character"
msgstr "CPP 半整數短於 CPP 字元"

#: init.c:457
#, c-format
msgid "CPP on this host cannot handle wide character constants over %lu bits, but the target requires %lu bits"
msgstr "在此宿主機上，CPP 不能處理長於 %lu 位的寬字元常數，但目標需要 %lu 位"

#: lex.c:283
msgid "backslash and newline separated by space"
msgstr "反斜線和換列為空格所分隔"

#: lex.c:288
msgid "backslash-newline at end of file"
msgstr "反斜線-換列出現在檔案末尾"

#: lex.c:303
#, c-format
msgid "trigraph ??%c converted to %c"
msgstr "三元符 ??%c 轉換為 %c"

#: lex.c:310
#, c-format
msgid "trigraph ??%c ignored, use -trigraphs to enable"
msgstr "三元符 ??%c 被忽略，請使用 -trigraphs 來啟用"

#: lex.c:356
msgid "\"/*\" within comment"
msgstr "「/*」出現在註釋中"

#: lex.c:414
#, c-format
msgid "%s in preprocessing directive"
msgstr "預先處理指令中出現 %s"

#: lex.c:423
msgid "null character(s) ignored"
msgstr "忽略空字元"

#: lex.c:460
#, c-format
msgid "`%.*s' is not in NFKC"
msgstr "「%.*s」不在 NFKC 中"

#: lex.c:463
#, c-format
msgid "`%.*s' is not in NFC"
msgstr "「%.*s」不在 NFC 中"

#: lex.c:551
#, c-format
msgid "attempt to use poisoned \"%s\""
msgstr "試圖使用已加料的「%s」"

#: lex.c:559
msgid "__VA_ARGS__ can only appear in the expansion of a C99 variadic macro"
msgstr "__VA_ARGS__ 只能出現在 C99 可變參數巨集的展開中"

#: lex.c:659
msgid "null character(s) preserved in literal"
msgstr "空字元將保留在原文中"

#: lex.c:662
#, fuzzy, c-format
msgid "missing terminating %c character"
msgstr "缺少結尾的 > 字元"

#: lex.c:1027
msgid "C++ style comments are not allowed in ISO C90"
msgstr "C++ 風格的註釋在 ISO C90 中不被允許"

#: lex.c:1029
msgid "(this will be reported only once per input file)"
msgstr "(此警告為每個輸入檔案只報告一次)"

#: lex.c:1034
msgid "multi-line comment"
msgstr "多列註釋"

#: lex.c:1347
#, c-format
msgid "unspellable token %s"
msgstr "無法拼出的識別字 %s"

#: line-map.c:320
#, c-format
msgid "In file included from %s:%u"
msgstr "在包含自 %s：%u 的檔案中"

#: line-map.c:338
#, c-format
msgid ""
",\n"
"                 from %s:%u"
msgstr ""
"，\n"
"                 從 %s：%u"

#: macro.c:84
#, c-format
msgid "macro \"%s\" is not used"
msgstr "巨集「%s」未被使用"

#: macro.c:123 macro.c:319
#, c-format
msgid "invalid built-in macro \"%s\""
msgstr "無效的內建巨集「%s」"

#: macro.c:157
#, fuzzy
msgid "could not determine file timestamp"
msgstr "無法決定日期與時間"

#: macro.c:254
msgid "could not determine date and time"
msgstr "無法決定日期與時間"

#: macro.c:270
msgid "__COUNTER__ expanded inside directive with -fdirectives-only"
msgstr ""

#: macro.c:423
msgid "invalid string literal, ignoring final '\\'"
msgstr "無效的原文字串，忽略最後的「\\」"

#: macro.c:483
#, c-format
msgid "pasting \"%s\" and \"%s\" does not give a valid preprocessing token"
msgstr "粘貼「%s」和「%s」不能給出一個有效的預先處理識別字"

#: macro.c:558
msgid "ISO C99 requires rest arguments to be used"
msgstr "ISO C99 需要使用剩餘的引數"

#: macro.c:563
#, c-format
msgid "macro \"%s\" requires %u arguments, but only %u given"
msgstr "巨集「%s」需要 %u 個引數，但只給出了 %u 個"

#: macro.c:568
#, c-format
msgid "macro \"%s\" passed %u arguments, but takes just %u"
msgstr "巨集「%s」傳遞了 %u 個引數，但只需要 %u 個"

#: macro.c:679 traditional.c:680
#, c-format
msgid "unterminated argument list invoking macro \"%s\""
msgstr "呼叫巨集「%s」時引數清單未終止"

#: macro.c:782
#, c-format
msgid "function-like macro \"%s\" must be used with arguments in traditional C"
msgstr "類似函式的巨集「%s」在傳統 C 中必須與引數一起使用"

#: macro.c:1325
#, c-format
msgid "duplicate macro parameter \"%s\""
msgstr "重複的巨集參數「%s」"

#: macro.c:1371
#, c-format
msgid "\"%s\" may not appear in macro parameter list"
msgstr "「%s」不能出現在巨集參數清單中"

#: macro.c:1379
msgid "macro parameters must be comma-separated"
msgstr "巨集參數必須由逗號隔開"

#: macro.c:1396
msgid "parameter name missing"
msgstr "缺少參數名"

#: macro.c:1413
msgid "anonymous variadic macros were introduced in C99"
msgstr "匿名可變參數巨集在 C99 中被引入"

#: macro.c:1418
msgid "ISO C does not permit named variadic macros"
msgstr "ISO C 不允許具名的可變參數巨集"

#: macro.c:1427
msgid "missing ')' in macro parameter list"
msgstr "在巨集參數表中缺少「)」"

#: macro.c:1476
msgid "'##' cannot appear at either end of a macro expansion"
msgstr "「##」不能出現在巨集展開的兩端"

#: macro.c:1510
msgid "ISO C99 requires whitespace after the macro name"
msgstr "ISO C99 要求巨集名後必須有空白"

#: macro.c:1534
msgid "missing whitespace after the macro name"
msgstr "巨集名後缺少空白"

#: macro.c:1564
msgid "'#' is not followed by a macro parameter"
msgstr "「#」後沒有巨集參數"

#: macro.c:1683
#, c-format
msgid "\"%s\" redefined"
msgstr "「%s」重定義"

#: macro.c:1688
msgid "this is the location of the previous definition"
msgstr "這是先前定義的位置"

#: macro.c:1738
#, c-format
msgid "macro argument \"%s\" would be stringified in traditional C"
msgstr "巨集引數「%s」將在傳統 C 中被字串化"

#: macro.c:1761
#, c-format
msgid "invalid hash type %d in cpp_macro_definition"
msgstr "cpp_macro_definition 中有無效的雜湊類型 %d"

#: pch.c:84 pch.c:332 pch.c:344 pch.c:362 pch.c:368 pch.c:377
msgid "while writing precompiled header"
msgstr "在寫入預先編譯標頭時"

#: pch.c:485
#, c-format
msgid "%s: not used because `%.*s' not defined"
msgstr "%s：未使用，因為「%.*s」未定義"

#: pch.c:497
#, c-format
msgid "%s: not used because `%.*s' defined as `%s' not `%.*s'"
msgstr "%s：未使用，因為「%.*s」被定義為「%s」而非「%*.s」"

#: pch.c:538
#, c-format
msgid "%s: not used because `%s' is defined"
msgstr "%s：未使用，因為「%s」已定義"

#: pch.c:558
#, fuzzy, c-format
msgid "%s: not used because `__COUNTER__' is invalid"
msgstr "%s：未使用，因為「%s」已定義"

#: pch.c:567 pch.c:737
msgid "while reading precompiled header"
msgstr "在讀取預先編譯標頭時"

#: traditional.c:750
#, c-format
msgid "detected recursion whilst expanding macro \"%s\""
msgstr "展開巨集「%s」時偵測到遞迴"

#: traditional.c:917
msgid "syntax error in macro parameter list"
msgstr "巨集參數清單語法錯誤"

#~ msgid "no newline at end of file"
#~ msgstr "檔案未以空白列結束"