- Remove duplicate transliterations for U+0152 and U+0153 from
C-translit.h.in.
- Change Ö U+00D6 LATIN CAPITAL LETTER O WITH STROKE → O
(instead of → OE)
- Change ö U+00F6 LATIN SMALL LETTER O WITH STROKE → o
(instead of → oe)
- Add ₹ U+20B9 INDIAN RUPEE SIGN → INR
- Add ₫ U+20AB DONG SIGN → Dong (in addition to "₫ → Đồng")
- Add many others from
http://unicode.org/cldr/trac/browser/trunk/common/transforms/Latin-ASCII.xml
- Add some more currency signs suggested by Marko Myllynen
- Add another patch with more characters by Marko Myllynen
The ldbl-128ibm implementation of logl is inaccurate for arguments
near 1, because when deciding whether to bypass a series expansion for
log(1+z), where z = x-1, it compares the square of z rather than z
itself with an epsilon value. This patch fixes that comparison, so
eliminating the test failures for inaccuracy of logl in such cases.
Tested for powerpc.
[BZ #19351]
* sysdeps/ieee754/ldbl-128ibm/e_logl.c (__ieee754_logl): When
expanding log(1+z), compare z rather than its square with epsilon
to determine when to avoid evaluating the expansion.
The ldbl-128ibm implementation of sinhl uses a slightly too small
overflow threshold (similar to bug 16407 for coshl). This patch fixes
it to use a safe threshold (so that values whose high part is above
the value compared with definitely result in an overflow in all
rounding modes).
Tested for powerpc.
[BZ #19350]
* sysdeps/ieee754/ldbl-128ibm/e_sinhl.c (__ieee754_sinhl):
Increase overflow threshold.
The ldbl-128ibm implementation of tanhl is inaccurate for small
arguments, because it returns x*(1+x) (maybe in an attempt to raise
"inexact") when x itself would be the accurate return value but
multiplying by 1+x introduces large errors. This patch fixes it to
return x in that case (when the mathematical result is x plus a
negligible remainder on the order of x^3) to avoid those errors.
Tested for powerpc.
[BZ #19349]
* sysdeps/ieee754/ldbl-128ibm/s_tanhl.c (__tanhl): Return argument
when small.
Now that we have __ASSUME_* macros for direct socket syscalls to use
them instead of socketcall when they can be assumed to be available on
socketcall architectures, this patch defines those macros when
appropriate for i386, m68k, microblaze and sh (for 4.3, 4.3, all
supported kernels and 2.6.37, respectively; the only use of socketcall
support on microblaze is it allows accept4 and sendmmsg to be
supported on a wider range of kernel versions).
David, it seems that 32-bit SPARC is the only architecture supported
by glibc that still lacks these direct syscalls. It would be good to
get them added to the SPARC kernel so we can eventually eliminate
socketcall support in glibc (and thereby just use entries in
sysdeps/unix/syscalls.list for most of these functions) when we can
assume new-enough kernels.
Tested for i386 (testsuite, and that installed shared libraries are
unchanged by this patch - not using a new enough kernel, so this
doesn't actually test much, but the i386 and m68k code is essentially
the same as that already in use for s390).
* sysdeps/unix/sysv/linux/i386/kernel-features.h
[__LINUX_KERNEL_VERSION >= 0x040300] (__ASSUME_SOCKET_SYSCALL):
New macro.
[__LINUX_KERNEL_VERSION >= 0x040300]
(__ASSUME_SOCKETPAIR_SYSCALL): Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300] (__ASSUME_BIND_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300] (__ASSUME_CONNECT_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300] (__ASSUME_LISTEN_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300] (__ASSUME_ACCEPT4_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300]
(__ASSUME_ACCEPT4_FOR_ACCEPT_SYSCALL): Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300]
(__ASSUME_GETSOCKOPT_SYSCALL): Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300]
(__ASSUME_SETSOCKOPT_SYSCALL): Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300]
(__ASSUME_GETSOCKNAME_SYSCALL): Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300]
(__ASSUME_GETPEERNAME_SYSCALL): Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300] (__ASSUME_SENDTO_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300]
(__ASSUME_SENDTO_FOR_SEND_SYSCALL): Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300] (__ASSUME_SENDMSG_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300] (__ASSUME_RECVFROM_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300]
(__ASSUME_RECVFROM_FOR_RECV_SYSCALL): Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300] (__ASSUME_RECVMSG_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300] (__ASSUME_SHUTDOWN_SYSCALL):
Likewise.
* sysdeps/unix/sysv/linux/m68k/kernel-features.h
[__LINUX_KERNEL_VERSION >= 0x040300] (__ASSUME_RECVMMSG_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300] (__ASSUME_SENDMMSG_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300] (__ASSUME_SOCKET_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300]
(__ASSUME_SOCKETPAIR_SYSCALL): Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300] (__ASSUME_BIND_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300] (__ASSUME_CONNECT_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300] (__ASSUME_LISTEN_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300] (__ASSUME_ACCEPT4_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300]
(__ASSUME_ACCEPT4_FOR_ACCEPT_SYSCALL): Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300]
(__ASSUME_GETSOCKOPT_SYSCALL): Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300]
(__ASSUME_SETSOCKOPT_SYSCALL): Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300]
(__ASSUME_GETSOCKNAME_SYSCALL): Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300]
(__ASSUME_GETPEERNAME_SYSCALL): Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300] (__ASSUME_SENDTO_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300]
(__ASSUME_SENDTO_FOR_SEND_SYSCALL): Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300] (__ASSUME_SENDMSG_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300] (__ASSUME_RECVFROM_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300]
(__ASSUME_RECVFROM_FOR_RECV_SYSCALL): Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300] (__ASSUME_RECVMSG_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300] (__ASSUME_SHUTDOWN_SYSCALL):
Likewise.
* sysdeps/unix/sysv/linux/microblaze/kernel-features.h
(__ASSUME_SOCKET_SYSCALL): Likewise.
(__ASSUME_BIND_SYSCALL): Likewise.
(__ASSUME_CONNECT_SYSCALL): Likewise.
(__ASSUME_LISTEN_SYSCALL): Likewise.
(__ASSUME_ACCEPT_SYSCALL): Likewise.
(__ASSUME_GETSOCKNAME_SYSCALL): Likewise.
(__ASSUME_GETPEERNAME_SYSCALL): Likewise.
(__ASSUME_SOCKETPAIR_SYSCALL): Likewise.
(__ASSUME_SEND_SYSCALL): Likewise.
(__ASSUME_SENDTO_SYSCALL): Likewise.
(__ASSUME_RECV_SYSCALL): Likewise.
(__ASSUME_RECVFROM_SYSCALL): Likewise.
(__ASSUME_SHUTDOWN_SYSCALL): Likewise.
(__ASSUME_GETSOCKOPT_SYSCALL): Likewise.
(__ASSUME_SETSOCKOPT_SYSCALL): Likewise.
(__ASSUME_SENDMSG_SYSCALL): Likewise.
(__ASSUME_RECVMSG_SYSCALL): Likewise.
* sysdeps/unix/sysv/linux/sh/kernel-features.h
[__LINUX_KERNEL_VERSION >= 0x020625] (__ASSUME_SOCKET_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x020625] (__ASSUME_BIND_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x020625] (__ASSUME_CONNECT_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x020625] (__ASSUME_LISTEN_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x020625] (__ASSUME_ACCEPT_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x020625]
(__ASSUME_GETSOCKNAME_SYSCALL): Likewise.
[__LINUX_KERNEL_VERSION >= 0x020625]
(__ASSUME_GETPEERNAME_SYSCALL): Likewise.
[__LINUX_KERNEL_VERSION >= 0x020625]
(__ASSUME_SOCKETPAIR_SYSCALL): Likewise.
[__LINUX_KERNEL_VERSION >= 0x020625] (__ASSUME_SEND_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x020625] (__ASSUME_SENDTO_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x020625] (__ASSUME_RECV_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x020625] (__ASSUME_RECVFROM_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x020625] (__ASSUME_SHUTDOWN_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x020625]
(__ASSUME_GETSOCKOPT_SYSCALL): Likewise.
[__LINUX_KERNEL_VERSION >= 0x020625]
(__ASSUME_SETSOCKOPT_SYSCALL): Likewise.
[__LINUX_KERNEL_VERSION >= 0x020625] (__ASSUME_SENDMSG_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x020625] (__ASSUME_RECVMSG_SYSCALL):
Likewise.
On MIPS when the toolchain is using the O32 FPXX ABI, the testsuite
fails to build for pre-R2 CPU.
It assumes that it is possible to use the -mfp64 option to build
tst-abi-fp64amod and tst-abi-fp64mod, while this requires a CPU which
supports the mfhc1 and mthc1 instructions, ie at least a R2 CPU:
error: '-mgp32' and '-mfp64' can only be combined if the target
supports the mfhc1 and mthc1 instructions
The same way it assumes that it is possible to use the -modd-spreg option
to build tst-abi-fpxxomod and tst-abi-fp64mod, while this requires at
least a R1 CPU:
warning: the 'mips2' architecture does not support odd
single-precision registers
This patches changes that by checking the usability of -mfp64 and
-modd-spreg options in configure, and disable those tests when they can
not be used.
Commit cf06a4e3 removed test-xfail-POSIX2008/unistd.h/linknamespace, but
left one basename namespace issue in grantpt. However this issue is not
visible with the default configuration buy only when configure is passed
the --enable-pt_chown option.
The ffs and ffsll functions were listed as math functions when they
are actually defined in strings.h and string.h respectively. Shuffle
around the Makefile variables a bit and make a separate space for ffs
and ffsll.
The sincos benchmark has only about a dozen inputs that don't measure
the impact of changes to various passes. Since much of the code
properties are inherited from sin and cos, copy those inputs in to get
more comprehensive coverage.
This patch allows to use x86_64 vector math functions with GCC 6.*
without OpenMP SIMD constructs. For additional details please visit
<https://sourceware.org/glibc/wiki/libmvec#Example_2>.
* sysdeps/x86/fpu/bits/math-vector.h: W/o -fopenmp declare vector math
functions with GCC 6.* __attribute__ ((__simd__)).
* manual/string.texi (Copying and Concatenation): Fix typos in
sample implementations of strncat and wcsncat, by having them use
the old value of the destination length, not the new one.
The nan, nanf and nanl functions handle payload strings by doing e.g.:
if (tagp[0] != '\0')
{
char buf[6 + strlen (tagp)];
sprintf (buf, "NAN(%s)", tagp);
return strtod (buf, NULL);
}
This is an unbounded stack allocation based on the length of the
argument. Furthermore, if the argument starts with an n-char-sequence
followed by ')', that n-char-sequence is wrongly treated as
significant for determining the payload of the resulting NaN, when ISO
C says the call should be equivalent to strtod ("NAN", NULL), without
being affected by that initial n-char-sequence. This patch fixes both
those problems by using the __strtod_nan etc. functions recently
factored out of strtod etc. for that purpose, with those functions
being exported from libc at version GLIBC_PRIVATE.
Tested for x86_64, x86, mips64 and powerpc.
[BZ #16961]
[BZ #16962]
* math/s_nan.c (__nan): Use __strtod_nan instead of constructing a
string on the stack for strtod.
* math/s_nanf.c (__nanf): Use __strtof_nan instead of constructing
a string on the stack for strtof.
* math/s_nanl.c (__nanl): Use __strtold_nan instead of
constructing a string on the stack for strtold.
* stdlib/Versions (libc): Add __strtof_nan, __strtod_nan and
__strtold_nan to GLIBC_PRIVATE.
* math/test-nan-overflow.c: New file.
* math/test-nan-payload.c: Likewise.
* math/Makefile (tests): Add test-nan-overflow and
test-nan-payload.
* manual/string.texi (String and Array Utilities):
Distinguish more carefully among bytes, multibyte characters,
and wide characters. Use "byte" when talking about C 'char',
to distinguish it more clearly from multibyte characters.
Say "wide character" or "multibyte character" instead of
"character", when a wide or multibyte character is intended.
Similarly for "multibyte string" versus "string".
Define these terms more carefully.
If a platform does not define "long-double-fcts = yes" in its
Makefiles and it does define __NO_LONG_DOUBLE_MATH in its installed
headers, it will currently create exported symbols for __finitel,
__isinfl, and __isnanl that can't be reached from userspace by
correct use of the finite(), isinf(), or isnan() macros in <math.h>.
To avoid this situation, by default for such platforms we now no
longer export these symbols, thus causing appropriate link-time
errors. However, for platforms that previously exported these
symbols, we continue to do so as compat symbols; this is enabled
by adding LDBL_CLASSIFY_COMPAT to math_private.h for the platform.
For tile, remove the now-unnecessary exports of those functions from
libc and libm.
This patch adds a new feature for powerpc. In order to get faster access to
the HWCAP/HWCAP2 bits and platform number (i.e. for implementing
__builtin_cpu_is () / __builtin_cpu_supports () in GCC) without the overhead of
reading from the auxiliary vector, we now reserve space for them in the TCB.
This is an ABI change for GLIBC 2.23.
A new versioned symbol '__parse_hwcap_and_convert_at_platform' is available to
get the data from the auxiliary vector and parse it, and store it for later use
in the TLS initialization code. This function is called very early
(in _dl_sysdep_start () via DL_PLATFORM_INFO for the dynamic linking case, and
in __libc_start_main () for the static linking case) to make sure the data is
available at the time of TLS initialization.
* sysdeps/powerpc/Makefile (sysdep-dl-routines): Add hwcapinfo.
(sysdep_routines): Likewise.
(sysdep-rtld-routines): Likewise.
[$(subdir) = nptl](tests): Add test-get_hwcap and test-get_hwcap-static
[$(subdir) = nptl](tests-static): test-get_hwcap-static
* sysdeps/powerpc/Versions: Added new
__parse_hwcap_and_convert_at_platform symbol to GLIBC-2.23.
* sysdeps/powerpc/hwcapinfo.c: New file.
(__tcb_parse_hwcap_and_convert_at_platform): New function to initialize
and parse hwcap, hwcap2 and platform number information.
* sysdeps/powerpc/hwcapinfo.h: New file. Creates global variables
to store HWCAP+HWCAP2 and platform number.
* sysdeps/powerpc/nptl/tcb-offsets.sym: Added new offsets
for HWCAP+HWCAP2 and platform number in the TCB.
* sysdeps/powerpc/nptl/tls.h: New functionality. Stores
the HWCAP, HWCAP2 and platform number in the TCB.
(dtv): Added new fields for HWCAP+HWCAP2 and platform number.
(TLS_INIT_TP): Included calls to add the hwcap and
at_platform values in the TCB in TP initialization.
(TLS_DEFINE_INIT_TP): Likewise.
(THREAD_GET_HWCAP): New macro.
(THREAD_SET_HWCAP): Likewise.
(THREAD_GET_AT_PLATFORM): Likewise.
(THREAD_SET_AT_PLATFORM): Likewise.
* sysdeps/powerpc/powerpc32/dl-machine.h:
(dl_platform_init): New function that calls
__parse_hwcap_and_convert_at_platform for the dymanic linking case for
powerpc32.
* sysdeps/powerpc/powerpc64/dl-machine.h: Likewise, for powerpc64.
* sysdeps/powerpc/test-get_hwcap-static.c: New file. Testcase for
this functionality, static linking case.
* sysdeps/powerpc/test-get_hwcap.c: New file. Likewise, dynamic
linking case.
* sysdeps/unix/sysv/linux/powerpc/libc-start.c: Added call to
__parse_hwcap_and_convert_at_platform for the static linking case.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/ld.abilist:
Included the new __parse_hwcap_and_convert_at_platform symbol in the
ABI list for GLIBC 2.23.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/ld-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/ld.abilist:
Likewise.
Add comments for IBM930, IBM933, IBM935, IBM937, and IBM939 which
explain exactly what purpose these encodings have and provide a URL to
the upstream IBM database that further provides the details of the
encoding.
The tst-cancel20 open two pipes and creates a thread which blocks
reading the first pipe. It then issues a signal to activate the
signal handler which in turn blocks reading the second pipe end.
Finally the cancellation cleanup-up handlers are tested by first
closing the all the pipes ends and issuing a pthread_cancel.
The tst-cancel21 have a similar behavior, but use an extra fork
after the test itself.
The race condition occurs if the cancellation handling acts after the
pipe close: in this case read will return EOF (indicating side-effects)
and thus the cancellation must not act. However current GLIBC
cancellation behavior acts regardless the syscalls returns with
sid-effects.
This patch adjust the test by moving the pipe closing after the
cancellation handling. This avoid spurious cancellation if the case
of the race described.
Checked on x86_64 and i386.
* nptl/tst-cancel20.c (do_one_test): Move the pipe closing after
pthread_join.
* nptl/tst-cancel21.c (tf): Likewise.
Since x86-64 and x32 use the same set of sched_XXX system call interface:
[hjl@gnu-6 linux-stable]$ grep sched_
arch/x86/entry/syscalls/syscall_64.tbl
24 common sched_yield sys_sched_yield
142 common sched_setparam sys_sched_setparam
143 common sched_getparam sys_sched_getparam
144 common sched_setscheduler sys_sched_setscheduler
145 common sched_getscheduler sys_sched_getscheduler
146 common sched_get_priority_max sys_sched_get_priority_max
147 common sched_get_priority_min sys_sched_get_priority_min
148 common sched_rr_get_interval sys_sched_rr_get_interval
203 common sched_setaffinity sys_sched_setaffinity
204 common sched_getaffinity sys_sched_getaffinity
314 common sched_setattr sys_sched_setattr
315 common sched_getattr sys_sched_getattr
[hjl@gnu-6 linux-stable]$
__cpu_mask should be unsigned long long, instead of unsigned long, for
x32. This patch adds __CPU_MASK_TYPE so that each architecture can
define the proper type for __cpu_mask.
[BZ #19313]
* bits/typesizes.h (__CPU_MASK_TYPE): New.
* sysdeps/mach/hurd/bits/typesizes.h (__CPU_MASK_TYPE): Likewise.
* sysdeps/nacl/bits/typesizes.h (__CPU_MASK_TYPE): Likewise.
* sysdeps/unix/sysv/linux/alpha/bits/typesizes.h (__CPU_MASK_TYPE):
Likewise.
* sysdeps/unix/sysv/linux/generic/bits/typesizes.h (__CPU_MASK_TYPE):
Likewise.
* sysdeps/unix/sysv/linux/s390/bits/typesizes.h (__CPU_MASK_TYPE):
Likewise.
* sysdeps/unix/sysv/linux/sparc/bits/typesizes.h (__CPU_MASK_TYPE):
Likewise.
* sysdeps/unix/sysv/linux/x86/bits/typesizes.h (__CPU_MASK_TYPE):
* sysdeps/unix/sysv/linux/bits/sched.h (__cpu_mask): Replace
unsigned long int with __CPU_MASK_TYPE.
Various sysdeps/ieee754/dbl-64 functions use double constants defined
using a union between a double and two ints, with separate big-endian
and little-endian definitions of the constants.
With modern C, this is unnecessary complication; hex float constants
(or __builtin_inf etc.) suffice to specify the exact value desired,
and so can avoid separate versions for each endianness. Having this
complication also complicates cleanups such as removing slow paths
from these library functions, as they need to make sure to remove both
copies of variables that are no longer used after such a cleanup (and
in at least one case, proper removal of a slow path will also involve
removing slow-path-only values from the middle of an array - an array
with both big-endian and little-endian copies - and adjusting other
references to that array).
So it makes sense to clean up the code to define these constants using
hex floats and so eliminate the endianness conditional. This patch
does so in the case of sqrt, where the two constants are such that it
makes sense just to put them directly in the code using them and
eliminate the names for them altogether.
Tested for arm (the code generated for sqrt does change, though not in
any significant way).
* sysdeps/ieee754/dbl-64/e_sqrt.c: Do not include uroot.h.
(__ieee754_sqrt): Use hex float constants instead of tm256.x and
t512.x.
* sysdeps/ieee754/dbl-64/uroot.h: Remove file.
AMD CPUs uses the similar encoding scheme for extended family and model
as Intel CPUs as shown in:
http://support.amd.com/TechDocs/25481.pdf
This patch updates get_common_indeces to get family and model for both
Intel and AMD CPUs when family == 0x0f.
[BZ #19214]
* sysdeps/x86/cpu-features.c (get_common_indeces): Add an
argument to return extended model. Update family and model
with extended family and model when family == 0x0f.
(init_cpu_features): Updated.
The RPC interface used by mmap uses the unsigned vm_offset_t, not the
signed off_t, so 32bit bigger than 2GiB values are fine actually.
* sysdeps/mach/hurd/mmap64.c: New file.
Revision 3.50 of the MIPS architecture defined FCSR ABS2008 and NAN2008
bits as optionally read/write [1][2]. No hardware implementation has
ever made use of this feature though. For example the first processor
to implement these bits, the MIPS32r3 proAptiv core, has both bits
read-only, hardwired to 1 [3]. And as from revision 5.03 of the MIPS
architecture the bits are required to be read-only, preset by hardware
[4][5]. Additionally all hardware implementations in existence have the
bits hardwired both to the same value, either of `0' and `1'.
These bits may still be read/write or hardwired to opposite values in
simulated hardware implementations such as QEMU or the FPU emulator
included with the Linux kernel. However to match real hardware
implementations the Linux kernel will set FCSR ABS2008 and NAN2008 bits
both to the same value where possible, reflecting the setting of the
EF_MIPS_NAN2008 ELF file header bit.
Therefore update the bit patterns in macro definitions we use for the
control word, in the 2008-NaN encoding mode, so that both bits have the
same value in a given bit pattern. Additionally mark the FCSR ABS2008
bit as reserved, so that high-level calls to change the control word do
not affect the bit.
This covers the regular FPU configurations, only leaving exotic corner
cases with the value of FCSR control word initially set by the kernel
different to what our code thinks it is. To address the remaining cases
the AT_FPUCW auxiliary vector entry would have to be implemented in the
Linux kernel, which currently is not.
References:
[1] "MIPS Architecture For Programmers, Volume I-A: Introduction to the
MIPS32 Architecture", MIPS Technologies, Inc., Document Number:
MD00082, Revision 3.50, September 20, 2012, Table 5.5 "FCSR Register
Field Descriptions", p. 80
[2] "MIPS Architecture For Programmers, Volume I-A: Introduction to the
MIPS64 Architecture", MIPS Technologies, Inc., Document Number:
MD00083, Revision 3.50, September 20, 2012, Table 5.5 "FCSR Register
Field Descriptions", p. 82
[3] "MIPS32 proAptiv Multiprocessing System Software User's Manual",
MIPS Technologies, Inc., Document Number: MD00878, Revision 01.22,
May 14, 2013, Table 12.10 "FCSR Bit Field Descriptions", p. 570
[4] "MIPS Architecture For Programmers, Volume I-A: Introduction to the
MIPS32 Architecture", MIPS Technologies, Inc., Document Number:
MD00082, Revision 5.03, Sept. 9, 2013, Table 5.7 "FCSR Register
Field Descriptions", p. 82
[5] "MIPS Architecture For Programmers, Volume I-A: Introduction to the
MIPS64 Architecture", MIPS Technologies, Inc., Document Number:
MD00083, Revision 5.03, Sept. 9, 2013, Table 5.7 "FCSR Register
Field Descriptions", p. 84
* sysdeps/mips/fpu_control.h (_FPU_RESERVED): Include ABS2008.
(_FPU_DEFAULT, _FPU_IEEE) [__mips_nan2008]: Set ABS2008.
In preparation to fix the --localedir configure argument we must
move the existing conflicting definition of localedir to a more
appropriate name. Given that all current internal uses of localedir
relate to the compiled locales we rename to complocaledir.
Old workaround based on assembly aliases can lead to link fail (bug 19058).
This patch makes workaround in another way to avoid it.
[BZ #19058]
* math/Makefile ($(inst_libdir)/libm.so): Added libmvec_nonshared.a
to AS_NEEDED.
* sysdeps/x86/fpu/bits/math-vector.h: Removed code with old workaround.
* sysdeps/x86_64/fpu/Makefile (libmvec-support,
libmvec-static-only-routines): Added new file.
* sysdeps/x86_64/fpu/svml_finite_alias.S: New file.
The nan* functions handle their string argument by constructing a
NAN(...) string on the stack as a VLA and passing it to strtod
functions.
This approach has problems discussed in bug 16961 and bug 16962: the
stack usage is unbounded, and it gives incorrect results in certain
cases where the argument is not a valid n-char-sequence.
The natural fix for both issues is to refactor the NaN payload parsing
out of strtod into a separate function that the nan* functions can
call directly, so that no temporary string needs constructing on the
stack at all. This patch does that refactoring in preparation for
fixing those bugs (but without actually using the new functions from
nan* - which will also require exporting them from libc at version
GLIBC_PRIVATE). This patch is not intended to change any user-visible
behavior, so no tests are added (fixes for the above bugs will of
course add tests for them).
This patch builds on my recent fixes for strtol and strtod issues in
Turkish locales. Given those fixes, the parsing of NaN payloads is
locale-independent; thus, the new functions do not need to take a
locale_t argument.
Tested for x86_64, x86, mips64 and powerpc.
* stdlib/strtod_nan.c: New file.
* stdlib/strtod_nan_double.h: Likewise.
* stdlib/strtod_nan_float.h: Likewise.
* stdlib/strtod_nan_main.c: Likewise.
* stdlib/strtod_nan_narrow.h: Likewise.
* stdlib/strtod_nan_wide.h: Likewise.
* stdlib/strtof_nan.c: Likewise.
* stdlib/strtold_nan.c: Likewise.
* sysdeps/ieee754/ldbl-128/strtod_nan_ldouble.h: Likewise.
* sysdeps/ieee754/ldbl-128ibm/strtod_nan_ldouble.h: Likewise.
* sysdeps/ieee754/ldbl-96/strtod_nan_ldouble.h: Likewise.
* wcsmbs/wcstod_nan.c: Likewise.
* wcsmbs/wcstof_nan.c: Likewise.
* wcsmbs/wcstold_nan.c: Likewise.
* stdlib/Makefile (routines): Add strtof_nan, strtod_nan and
strtold_nan.
* wcsmbs/Makefile (routines): Add wcstod_nan, wcstold_nan and
wcstof_nan.
* include/stdlib.h (__strtof_nan): Declare and use
libc_hidden_proto.
(__strtod_nan): Likewise.
(__strtold_nan): Likewise.
(__wcstof_nan): Likewise.
(__wcstod_nan): Likewise.
(__wcstold_nan): Likewise.
* include/wchar.h (____wcstoull_l_internal): Declare.
* stdlib/strtod_l.c: Do not include <ieee754.h>.
(____strtoull_l_internal): Remove declaration.
(STRTOF_NAN): Define macro.
(SET_MANTISSA): Remove macro.
(STRTOULL): Likewise.
(____STRTOF_INTERNAL): Use STRTOF_NAN to parse NaN payload.
* stdlib/strtof_l.c (____strtoull_l_internal): Remove declaration.
(STRTOF_NAN): Define macro.
(SET_MANTISSA): Remove macro.
* sysdeps/ieee754/ldbl-128/strtold_l.c (STRTOF_NAN): Define macro.
(SET_MANTISSA): Remove macro.
* sysdeps/ieee754/ldbl-128ibm/strtold_l.c (STRTOF_NAN): Define
macro.
(SET_MANTISSA): Remove macro.
* sysdeps/ieee754/ldbl-64-128/strtold_l.c (STRTOF_NAN): Define
macro.
(SET_MANTISSA): Remove macro.
* sysdeps/ieee754/ldbl-96/strtold_l.c (STRTOF_NAN): Define macro.
(SET_MANTISSA): Remove macro.
* wcsmbs/wcstod_l.c (____wcstoull_l_internal): Remove declaration.
* wcsmbs/wcstof_l.c (____wcstoull_l_internal): Likewise.
* wcsmbs/wcstold_l.c (____wcstoull_l_internal): Likewise.
The implementations of strtod and related functions use
locale-specific conversions to lower case when parsing the contents of
a string NAN(n-char-sequence_opt). This has the consequence that
NAN(I) is not treated as being of that form (only the initial NAN part
is accepted). The syntax of n-char-sequence directly maps to the
ASCII letters, digits and underscore as in identifiers, so it is
unambiguous that all ASCII letters must be accepted in all locales.
This patch, relative to a tree with
<https://sourceware.org/ml/libc-alpha/2015-11/msg00258.html> (pending
review) applied and depending on that patch, fixes this problem by
checking directly for ASCII letters. This will have the side effect
of no longer accepting 'İ' (dotted 'I') inside NAN() in Turkish
locales, which seems appropriate (that letter wouldn't have been
interpreted as having any meaning in the NaN payload anyway, as not
acceptable to strtoull).
Tested for x86_64 and x86.
[BZ #19266]
* stdlib/strtod_l.c (____STRTOF_INTERNAL): Check directly for
upper case and lower case letters inside NAN(), not using TOLOWER.
* stdlib/tst-strtod-nan-locale-main.c: New file.
* stdlib/tst-strtod-nan-locale.c: Likewise.
* stdlib/Makefile (tests): Add tst-strtod-nan-locale.
[$(run-built-tests) = yes] ($(objpfx)tst-strtod-nan-locale.out):
Depend on $(gen-locales).
($(objpfx)tst-strtod-nan-locale): Depend on $(libm).
* wcsmbs/tst-wcstod-nan-locale.c: New file.
* wcsmbs/Makefile (tests): Add tst-wcstod-nan-locale.
[$(run-built-tests) = yes] ($(objpfx)tst-wcstod-nan-locale.out):
Depend on $(gen-locales).
($(objpfx)tst-wcstod-nan-locale): Depend on $(libm).
This avoids build failures in the tests, and matches what is in
bits/mathdef.h.
Update the libc and libm abilist files to include __finitel,
__isinfl, and __isnanl.
With current kernel versions, the check does not reliably detect that
unavailable CPUs are requested, for these reasons:
(1) The kernel will silently ignore non-allowed CPUs, that is, CPUs
which are physically present but disallowed for the thread
based on system configuration.
(2) Similarly, CPU bits which lack an online CPU (possible CPUs)
are ignored.
(3) The existing probing code assumes that the CPU mask size is a
power of two and at least 1024. Neither has it to be a power
of two, nor is the minimum possible value 1024, so the value
determined is often too large. This means that the CPU set
size check in glibc accepts CPU bits beyond the actual hard
system limit.
(4) Future kernel versions may not even have a fixed CPU set size.
After the removal of the probing code, the kernel still returns
EINVAL if no CPU in the requested set remains which can run the
thread after the affinity change.
Applications which care about the exact affinity mask will have
to query it using sched_getaffinity after setting it. Due to the
effects described above, this commit does not change this.
The new tests supersede tst-getcpu, which is removed. This
addresses bug 19164 because the new tests allocate CPU sets
dynamically.
* nptl/check-cpuset.h: Remove.
* nptl/pthread_attr_setaffinity.c (__pthread_attr_setaffinity_new):
Remove CPU set size check.
* nptl/pthread_setattr_default_np.c (pthread_setattr_default_np):
Likewise.
* sysdeps/unix/sysv/linux/check-cpuset.h: Remove.
* sysdeps/unix/sysv/linux/pthread_setaffinity.c
(__kernel_cpumask_size, __determine_cpumask_size): Remove.
(__pthread_setaffinity_new): Remove CPU set size check.
* sysdeps/unix/sysv/linux/sched_setaffinity.c
(__kernel_cpumask_size): Remove.
(__sched_setaffinity_new): Remove CPU set size check.
* manual/threads.texi (Default Thread Attributes): Remove stale
reference to check_cpuset_attr, determine_cpumask_size in comment.
* sysdeps/unix/sysv/linux/Makefile [$(subdir) == posix] (tests):
Remove tst-getcpu. Add tst-affinity, tst-affinity-pid.
[$(subdir) == nptl] (tests): Add tst-thread-affinity-pthread,
tst-thread-affinity-pthread2, tst-thread-affinity-sched.
* sysdeps/unix/sysv/linux/tst-affinity.c: New file.
* sysdeps/unix/sysv/linux/tst-affinity-pid.c: New file.
* sysdeps/unix/sysv/linux/tst-skeleton-affinity.c: New skeleton test file.
* sysdeps/unix/sysv/linux/tst-thread-affinity-sched.c: New file.
* sysdeps/unix/sysv/linux/tst-thread-affinity-pthread.c: New file.
* sysdeps/unix/sysv/linux/tst-thread-affinity-pthread2.c: New file.
* sysdeps/unix/sysv/linux/tst-thread-skeleton-affinity.c: New
skeleton test file.
* sysdeps/unix/sysv/linux/tst-getcpu.c: Remove. Superseded by
tst-affinity-pid.
This patch updates <sys/ptrace.h> for Linux 4.3, adding
PTRACE_O_SUSPEND_SECCOMP and updating the value of PTRACE_O_MASK.
Some architectures were missing the older PTRACE_O_EXITKILL, so that
was added to the files missing it as well.
Tested for x86_64 (testsuite, and that installed shared libraries are
unchanged by the patch).
* sysdeps/unix/sysv/linux/aarch64/sys/ptrace.h
(PTRACE_O_EXITKILL): New value in enum __ptrace_setoptions.
(PTRACE_O_SUSPEND_SECCOMP): Likewise.
(PTRACE_O_MASK): Update value.
* sysdeps/unix/sysv/linux/ia64/sys/ptrace.h (PTRACE_O_EXITKILL):
New value in enum __ptrace_setoptions.
(PTRACE_O_SUSPEND_SECCOMP): Likewise.
(PTRACE_O_MASK): Update value.
* sysdeps/unix/sysv/linux/powerpc/sys/ptrace.h
(PTRACE_O_SUSPEND_SECCOMP): New value in enum __ptrace_setoptions.
(PTRACE_O_MASK): Update value.
* sysdeps/unix/sysv/linux/s390/sys/ptrace.h
(PTRACE_O_SUSPEND_SECCOMP): New value in enum __ptrace_setoptions.
(PTRACE_O_MASK): Update value.
* sysdeps/unix/sysv/linux/sparc/sys/ptrace.h
(PTRACE_O_SUSPEND_SECCOMP): New value in enum __ptrace_setoptions.
(PTRACE_O_MASK): Update value.
* sysdeps/unix/sysv/linux/sys/ptrace.h (PTRACE_O_SUSPEND_SECCOMP):
New value in enum __ptrace_setoptions.
(PTRACE_O_MASK): Update value.
* sysdeps/unix/sysv/linux/tile/sys/ptrace.h (PTRACE_O_EXITKILL):
New value in enum __ptrace_setoptions.
(PTRACE_O_SUSPEND_SECCOMP): Likewise.
(PTRACE_O_MASK): Update value.
In the course of reviewing Linux 4.3 changes for any glibc header
updates needed, I found that
sysdeps/unix/sysv/linux/netpacket/packet.h was extremely out of date
(last updated for Linux 2.3.15, it seems). This patch updates the
sets of constants present in that header to include those added to
those sets in newer kernels (include/uapi/linux/if_packet.h).
Tested for x86_64 (testsuite, and that installed shared libraries are
unchanged by the patch).
* sysdeps/unix/sysv/linux/netpacket/packet.h (PACKET_COPY_THRESH):
New macro.
(PACKET_AUXDATA): Likewise.
(PACKET_ORIGDEV): Likewise.
(PACKET_VERSION): Likewise.
(PACKET_HDRLEN): Likewise.
(PACKET_RESERVE): Likewise.
(PACKET_TX_RING): Likewise.
(PACKET_LOSS): Likewise.
(PACKET_VNET_HDR): Likewise.
(PACKET_TX_TIMESTAMP): Likewise.
(PACKET_TIMESTAMP): Likewise.
(PACKET_FANOUT): Likewise.
(PACKET_TX_HAS_OFF): Likewise.
(PACKET_QDISC_BYPASS): Likewise.
(PACKET_ROLLOVER_STATS): Likewise.
(PACKET_FANOUT_DATA): Likewise.
(PACKET_MR_UNICAST): Likewise.
The implementations of strtol and related functions use
locale-specific conversions to upper case before determining whether a
character is a valid letter in the argument. This means that in
Turkish locales such as tr_TR.UTF-8 and tr_TR.ISO-8859-9, "i" is
interpreted as not being a valid number, when if the base passed to
strtol is 19 or more it should be interpreted as the number 18.
ISO C explicitly says "The letters from a (or A) through z (or Z) are
ascribed the values 10 through 35", so clearly intends the standard
ASCII letters (otherwise you wouldn't generally have exactly 26
letters to ascribe such values) (whereas white-space must be
identified according to the locale). In particular, 'i' and 'I' must
be understood to be in that sequence.
This patch makes the code do the case conversions and classification
in the C locale; the user's locale remains used for whitespace testing
(explicitly correct according to ISO C). Note that the way the code
worked, the only non-ASCII letter that would previously have been
accepted would have been the Turkish 'ı' (dotless 'i'), because the
uppercase version of that in Turkish locales is 'I'. This patch means
that will no longer be accepted, which seems appropriate.
Tested for x86_64 and x86.
[BZ #19242]
* stdlib/strtol_l.c (ISALPHA): Use _nl_C_locobj_ptr for locale.
(TOUPPER): Likewise.
* stdlib/tst-strtol-locale-main.c: New file.
* stdlib/tst-strtol-locale.c: Likewise.
* stdlib/Makefile (tests): Add tst-strtol-locale.
[$(run-built-tests) = yes] (LOCALES): Add tr_TR.ISO-8859-9.
[$(run-built-tests) = yes] ($(objpfx)tst-strtol-locale.out):
Depend on $(gen-locales).
* wcsmbs/tst-wcstol-locale.c: New file.
* wcsmbs/Makefile (tests): Add tst-wcstol-locale.
[$(run-built-tests) = yes] (LOCALES): Add tr_TR.UTF-8 and
tr_TR.ISO-8859-9.
[$(run-built-tests) = yes] ($(objpfx)tst-wcstol-locale.out):
Depend on $(gen-locales).
Various math_private.h headers are guarded by "#ifndef
_MATH_PRIVATE_H", but never define the macro. Nothing else defines
the macro either (the generic math_private.h that they include defines
a different macro, _MATH_PRIVATE_H_), so those guards are ineffective.
With the recent inclusion of s_sin.c in s_sincos.c, this breaks the
build for MIPS, since the build of s_sincos.c ends up including
<math_private.h> twice and the MIPS version defines inline functions
such as libc_feholdexcept_mips, without a separate fenv_private.h
header with its own guards such as some architectures have.
This patch fixes all the problem headers to use architecture-specific
guard macro names, and to define those macros in the headers they
guard, just as some architectures already do.
Tested for x86 (testsuite, and that installed shared libraries are
unchanged by the patch), and for mips64 (that it fixes the build).
* sysdeps/arm/math_private.h [!_MATH_PRIVATE_H]: Change guard to
[!ARM_MATH_PRIVATE_H].
[!ARM_MATH_PRIVATE_H] (ARM_MATH_PRIVATE_H): Define macro.
* sysdeps/hppa/math_private.h [!_MATH_PRIVATE_H]: Change guard to
[!HPPA_MATH_PRIVATE_H].
[!HPPA_MATH_PRIVATE_H] (HPPA_MATH_PRIVATE_H): Define macro.
* sysdeps/i386/fpu/math_private.h [!_MATH_PRIVATE_H]: Change guard
to [!I386_MATH_PRIVATE_H].
[!I386_MATH_PRIVATE_H] (I386_MATH_PRIVATE_H): Define macro.
* sysdeps/m68k/m680x0/fpu/math_private.h [!_MATH_PRIVATE_H]:
Change guard to [!M68K_MATH_PRIVATE_H].
[!M68K_MATH_PRIVATE_H] (M68K_MATH_PRIVATE_H): Define macro.
* sysdeps/microblaze/math_private.h [!_MATH_PRIVATE_H]: Change
guard to [!MICROBLAZE_MATH_PRIVATE_H].
[!MICROBLAZE_MATH_PRIVATE_H] (MICROBLAZE_MATH_PRIVATE_H): Define
macro.
* sysdeps/mips/math_private.h [!_MATH_PRIVATE_H]: Change guard to
[!MIPS_MATH_PRIVATE_H].
[!MIPS_MATH_PRIVATE_H] (MIPS_MATH_PRIVATE_H): Define macro.
* sysdeps/nios2/math_private.h [!_MATH_PRIVATE_H]: Change guard to
[!NIO2_MATH_PRIVATE_H].
[!NIO2_MATH_PRIVATE_H] (NIO2_MATH_PRIVATE_H): Define macro.
* sysdeps/tile/math_private.h [!_MATH_PRIVATE_H]: Change guard to
[!TILE_MATH_PRIVATE_H].
[!TILE_MATH_PRIVATE_H] (TILE_MATH_PRIVATE_H): Define macro.
The lgamma (and likewise lgammaf, lgammal) function wrongly sets the
signgam variable even when building for strict ISO C conformance
(-std=c99 / -std=c11), although the user may define such a variable
and it's only in the implementation namespace for POSIX with XSI
extensions enabled.
Following discussions starting at
<https://sourceware.org/ml/libc-alpha/2013-04/msg00767.html> and
<https://sourceware.org/ml/libc-alpha/2015-10/msg00844.html>, it seems
that the safest approach for fixing this particular issue is for
signgam to become a weak alias for a newly exported symbol __signgam,
with the library functions only setting __signgam, at which point
static linker magic will preserve the alias for newly linked binaries
that refer to the library's signgam rather than defining their own,
while breaking the alias for programs that define their own signgam,
with new symbol versions for lgamma functions and with compat symbols
for existing binaries that set both signgam and __signgam.
This patch implements that approach for the fix. signgam is made into
a weak alias. The four symbols __signgam, lgamma, lgammaf, lgammal
get new symbol versions at version GLIBC_2.23, with the existing
versions of lgamma, lgammaf and lgammal becoming compat symbols.
When the compat versions are built, gamma, gammaf and gammal are
aliases for the compat versions (i.e. always set signgam); this is OK
as they are not ISO C functions, and avoids adding new symbol versions
for them unnecessarily. When the compat versions are not built
(i.e. for static linking and for future glibc ports), gamma, gammaf
and gammal are aliases for the new versions that set __signgam. The
ldbl-opt versions are updated accordingly.
The lgamma wrappers are adjusted so that the same source files,
included from different files with different definitions of
USE_AS_COMPAT, can build either the new versions or the compat
versions. Similar changes are made to the ia64 versions (untested).
Tests are added that the lgamma functions do not interfere with a user
variable called signgam for ISO C, with various choices for the size
of that variable, whether it is initialized, and for static and
dynamic linking. The conformtest whitelist entry is removed as well.
Tested for x86_64, x86, mips64 and powerpc, including looking at
objdump --dynamic-syms output to make sure the expected sets of
symbols were aliases. Also spot-tested that a binary built with old
glibc works properly (i.e. gets signgam set) when run with new glibc.
[BZ #15421]
* sysdeps/ieee754/s_signgam.c (signgam): Rename to __signgam,
initialize with 0 and define as weak alias of __signgam.
* include/math.h [!_ISOMAC] (__signgam): Declare.
* math/Makefile (libm-calls): Add w_lgamma_compat.
(tests): Add test-signgam-uchar, test-signgam-uchar-init,
test-signgam-uint, test-signgam-uint-init, test-signgam-ullong and
test-signgam-ullong-init.
(tests-static): Add test-signgam-uchar-static,
test-signgam-uchar-init-static, test-signgam-uint-static,
test-signgam-uint-init-static, test-signgam-ullong-static and
test-signgam-ullong-init-static.
(CFLAGS-test-signgam-uchar.c): New variable.
(CFLAGS-test-signgam-uchar-init.c): Likewise.
(CFLAGS-test-signgam-uchar-static.c): Likewise.
(CFLAGS-test-signgam-uchar-init-static.c): Likewise.
(CFLAGS-test-signgam-uint.c): Likewise.
(CFLAGS-test-signgam-uint-init.c): Likewise.
(CFLAGS-test-signgam-uint-static.c): Likewise.
(CFLAGS-test-signgam-uint-init-static.c): Likewise.
(CFLAGS-test-signgam-ullong.c): Likewise.
(CFLAGS-test-signgam-ullong-init.c): Likewise.
(CFLAGS-test-signgam-ullong-static.c): Likewise.
(CFLAGS-test-signgam-ullong-init-static.c): Likewise.
* math/Versions (libm): Add GLIBC_2.23.
* math/lgamma-compat.h: New file.
* math/test-signgam-main.c: Likewise.
* math/test-signgam-uchar-init-static.c: Likewise.
* math/test-signgam-uchar-init.c: Likewise.
* math/test-signgam-uchar-static.c: Likewise.
* math/test-signgam-uchar.c: Likewise.
* math/test-signgam-uint-init-static.c: Likewise.
* math/test-signgam-uint-init.c: Likewise.
* math/test-signgam-uint-static.c: Likewise.
* math/test-signgam-uint.c: Likewise.
* math/test-signgam-ullong-init-static.c: Likewise.
* math/test-signgam-ullong-init.c: Likewise.
* math/test-signgam-ullong-static.c: Likewise.
* math/test-signgam-ullong.c: Likewise.
* math/w_lgamma.c: Rename to w_lgamma_main.c and replace by
wrapper of w_lgamma_main.c.
* math/w_lgamma_compat.c: New file.
* math/w_lgamma_compatf.c: Likewise.
* math/w_lgamma_compatl.c: Likewise.
* math/w_lgamma_main.c: New file. Based on w_lgamma.c. Include
<lgamma-compat.h>. Condition contents on [BUILD_LGAMMA]. Support
defining compatibility symbols.
(__lgamma): Change to LGFUNC (__lgamma). Use CALL_LGAMMA.
* math/w_lgammaf.c: Rename to w_lgammaf_main.c and replace by
wrapper of w_lgammaf_main.c.
* math/w_lgammaf_main.c: New file. Based on w_lgammaf.c. Include
<lgamma-compat.h>. Condition contents on [BUILD_LGAMMA]. Support
defining compatibility symbols.
(__lgammaf): Change to LGFUNC (__lgammaf). Use CALL_LGAMMA.
* math/w_lgammal.c: Rename to w_lgammal_main.c and replace by
wrapper of w_lgammal_main.c.
* math/w_lgammal_main.c: New file. Based on w_lgammal.c. Include
<lgamma-compat.h>. Condition contents on [BUILD_LGAMMA]. Support
defining compatibility symbols.
(__lgammal): Change to LGFUNC (__lgammal). Use CALL_LGAMMA.
* sysdeps/ia64/fpu/lgamma-compat.h: New file.
* sysdeps/ia64/fpu/w_lgamma.c: Move to ....
* sysdeps/ia64/fpu/w_lgamma_main.c: ...here. Include
<lgamma-compat.h>.
(__ieee754_lgamma): Change to LGFUNC (lgamma). Use CALL_LGAMMA.
(__ieee754_gamma): Define as alias.
* sysdeps/ia64/fpu/w_lgammaf.c: Move to ....
* sysdeps/ia64/fpu/w_lgammaf_main.c: ...here. Include
<lgamma-compat.h>.
(__ieee754_lgammaf): Change to LGFUNC (lgammaf). Use CALL_LGAMMA.
(__ieee754_gammaf): Define as alias.
* sysdeps/ia64/fpu/w_lgammal.c: Move to ....
* sysdeps/ia64/fpu/w_lgammal_main.c: ...here. Include
<lgamma-compat.h>.
(__ieee754_lgammal): Change to LGFUNC (lgammal). Use CALL_LGAMMA.
(__ieee754_gammal): Define as alias.
* sysdeps/ieee754/ldbl-opt/w_lgamma.c: Move to ....
* sysdeps/ieee754/ldbl-opt/w_lgamma_compat.c: ...here. Include
<math/w_lgamma_compat.c>.
[LONG_DOUBLE_COMPAT(libm, GLIBC_2_0)] (__lgammal_dbl_compat):
Define as alias of __lgamma_compat and use in defining lgammal.
* sysdeps/ieee754/ldbl-opt/w_lgammal.c: Move to ....
* sysdeps/ieee754/ldbl-opt/w_lgamma_compatl.c: ...here. Include
<math/lgamma-compat.h> and <math/w_lgamma_compatl.c>.
(USE_AS_COMPAT): New macro.
(LGAMMA_OLD_VER): Undefine and redefine.
(lgammal): Do not define here.
(gammal): Only define here if [GAMMA_ALIAS].
* conform/linknamespace.pl (@whitelist): Remove signgam.
* sysdeps/nacl/libm.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
Linux 2.6.32 and forward do not show the issue regarding SysV SIGCHLD
vs. SIG_IGN for nanosleep which make it feasible to use it for sleep
implementation without requiring any hacking to handle the spurious
wake up. The issue is likely being fixed before 2.6 and git
history [1] [2].
This patch simplifies the sleep code to call nanosleep directly by
using the posix default version. It also removes the early cancellation
tests for zero argument, since nanosleep will handle cancellation
in this case.
[1] https://lkml.org/lkml/2004/11/25/5
[2] https://lkml.org/lkml/2003/11/8/50
Checked on x86_64, ppc64le, and aarch64.
[BZ #16364]
* sysdeps/unix/sysv/linux/sleep.c: Remove file
* sysdeps/posix/sleep.c (__sleep): Simplify cancellation handling.
This patch optimizes powerpc spinlock implementation by:
* Use the correct EH hint bit on the larx for supported ISA. For lock
acquisition, the thread that acquired the lock with a successful stcx
does not want to give away the write ownership on the cacheline. The
idea is to make the load reservation "sticky" about retaining write
authority to the line. That way, the store that must inevitably come
to release the lock can succeed quickly and not contend with other
threads issuing lwarx. If another thread does a store to the line
(false sharing), the winning thread must give up write authority to
the proper value of EH for the larx for a lock acquisition is 1.
* Increase contented lock performance by up to 40%, and no measurable
impact on uncontended locks on P8.
Thanks to Adhemerval Zanella who did most of the work. I've run some
tests, and addressed some minor feedback.
* sysdeps/powerpc/nptl/pthread_spin_lock.c (pthread_spin_lock):
Add lwarx hint, and use macro for acquire instruction.
* sysdeps/powerpc/nptl/pthread_spin_trylock.c (pthread_spin_trylock):
Likewise.
* sysdep/unix/sysv/linux/powerpc/pthread_spin_unlock.c: Move to ...
* sysdeps/powerpc/nptl/pthread_spin_unlock.c: ... here, and
update to use new atomic macros.
__lll_trylock_elision sets the adapt_count variable too
aggressively, and incorrectly on persistent aborts. Taking
a cue from s390, adapt_count is only updated if the lock
is locked, or a persistent failure occurs.
In addition, the abort codes have been renumbered and
refactored for clarity. As it stands, glibc only cares
if the abort is persistent or not.
All aborts are now persistent, excepting a busy lock. This
includes changing _ABORT_NESTED_TRYLOCK into a persistent
abort.
* sysdeps/unix/sysv/linux/powerpc/elision-trylock.c
(__lll_trylock_elision): Fix setting of adapt_count.
* sysdeps/unix/sysv/linux/powerpc/htm.h
(_ABORT_PERSISTENT): Define to clarify persistent aborts.
(_ABORT_NESTED_TRYLOCK): Renumber, and make persistent.
(_ABORT_SYSCALL): Renumber, and clarify definition.
(_ABORT_LOCK_BUSY): Renumber, make non-persistent.
Kind of hokey, but errno.h drags in misc/sys/param.h which
defines MIN/MAX causing an error. Include system headers
first to grab MIN/MAX definition in param.h, and define
HAVE_ALLOCA to preserve existing behavior.
* sysdeps/ieee754/ldbl-128ibm/mpn2ldl.c: Include gmp headers
after system headers to prevent MIN/MAX redefinition. Define
HAVE_ALLOCA to preserve builtin alloca usage.
Include the __sin and __cos functions as local static copies to allow
deper optimization of the functions. This change shows an improvement
of about 17% in the min case and 12.5% in the mean case for the sincos
microbenchmark on x86_64.
* sysdeps/ieee754/dbl-64/s_sin.c (__sin)[IN_SINCOS]: Mark function
static and don't set or restore rounding.
(__cos)[IN_SINCOS]: Likewise.
* sysdeps/ieee754/dbl-64/s_sincos.c: Include s_sin.c.
(__sincos): Set and restore rounding mode. Remove check for infinite
or NaN input.
Prevent function calls that don't return anything from being optimized
out by the compiler by marking its input variables as used.
This prevents the sincos function call from being optimized out in the
benchmark.
For ldbl-128ibm, if the result of strtold overflows in the final
conversion from MPN to IBM long double (because the exponent for a
106-bit IEEE result is 1023 but the high part would end up as
0x1p1024, which overflows), that conversion code fails to handle this
and produces an invalid long double value (high part infinite, low
part not zero) without raising exceptions or setting errno. This
patch adds an explicit check for this case to ensure an appropriate
result is returned in a way that ensures the right exceptions are
raised, with errno set.
Tested for powerpc.
[BZ #14551]
* sysdeps/ieee754/ldbl-128ibm/mpn2ldbl.c: Include <errno.h>.
(__mpn_construct_long_double): If high part overflows to infinity,
set errno and recompute overflowed result of the correct sign.
* sysdeps/ieee754/ldbl-128ibm/Makefile
[$(subdir) = stdlib] (tests): Add tst-strtold-ldbl-128ibm.
[$(subdir) = stdlib] ($(objpfx)tst-strtold-ldbl-128ibm): Depend on
$(libm).
* sysdeps/ieee754/ldbl-128ibm/tst-strtold-ldbl-128ibm.c: New file.
The powerpc hard-float round and roundf functions, both 32-bit and
64-bit, raise spurious "inexact" exceptions for integer arguments from
adding 0.5 and rounding to integer toward zero.
Since these functions already save and restore the rounding mode, it's
natural to make them restore the full floating-point state instead to
fix this bug, which this patch does. The save of the state is moved
after the first floating-point operation on the input so that any
"invalid" exceptions from signaling NaN inputs are properly
preserved. As a consequence of this approach to the fix, "inexact"
for noninteger arguments (disallowed by TS 18661-1 but not by C99/C11,
see bug 15479) is also avoided for these implementations; this is
*not* a general fix for bug 15479 since plenty of other
implementations of various functions still raise spurious "inexact"
for noninteger arguments.
This issue and fix do not apply to builds using power5+ versions of
round and roundf, which use the frin instruction and avoid "inexact"
exceptions that way.
This patch should get hard-float powerpc32 and powerpc64 (default
function implementations) back to a state where test-float and
test-double will pass after ulps regeneration.
Tested for powerpc32 and powerpc64.
[BZ #15479]
[BZ #19238]
* sysdeps/powerpc/powerpc32/fpu/s_round.S (__round): Save
floating-point state after first operation on input. Restore full
state rather than just rounding mode.
* sysdeps/powerpc/powerpc32/fpu/s_roundf.S (__roundf): Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_round.S (__round): Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_roundf.S (__roundf): Likewise.
Similar to bug 19134 for powerpc32, the powerpc64 implementations of
lround, lroundf, llround, llroundf can raise spurious "inexact"
exceptions for integer arguments from adding 0.5 then converting to
integer (this does not apply to the power5+ version for double, which
uses the frin instruction which is defined never to raise "inexact"; I
don't know why power5+ doesn't use that version for float as well).
This patch fixes the bug in a similar way to the powerpc32 bug, by
testing for integers (adding and subtracting 2^52 and comparing with
the value before that addition and subtraction) and not adding 0.5 in
that case.
The powerpc maintainers may wish to look at making power5+ / power6x /
power8 use frin for float lround / llround as well as for double,
unless there's some reason I've missed that this isn't beneficial.
Tested for powerpc64.
[BZ #19235]
* sysdeps/powerpc/powerpc64/fpu/s_llround.S (__llround): Do not
add 0.5 to integer arguments.
* sysdeps/powerpc/powerpc64/fpu/s_llroundf.S (__llroundf):
Likewise.
(.LC2): New object.
Similar to bug 15491 recently fixed for x86_64 / x86, the powerpc
(both powerpc32 and powerpc64) hard-float implementations of
nearbyintf and nearbyint wrongly clear an "inexact" exception that was
raised before the function was called; this shows up as failure of the
test math/test-nearbyint-except added when that bug was fixed. They
also wrongly leave traps on "inexact" disabled if they were enabled
before the function was called.
This patch fixes the bugs similar to how the x86 bug was fixed: saving
and restoring the whole floating-point state, both to restore the
original "inexact" flag state and to restore the original state of
whether traps on "inexact" were enabled. Because there's a convenient
point in the powerpc implementations to save state after any sNaN
arguments will have raised "invalid" but before "inexact" traps need
to be disabled, no special handling for "invalid" is needed as in the
x86 version.
Tested for powerpc64 and powerpc32, where it fixes the
math/test-nearbyint-except failure as well as fixing the new test
math/test-nearbyint-except-2 added by this patch. Also tested for
x86_64 and x86 that the new test passes.
If powerpc experts see a more efficient way of doing this
(e.g. instruction positioning that's better for pipelines on typical
processors) then of course followups optimizing the fix are welcome.
[BZ #19228]
* sysdeps/powerpc/powerpc32/fpu/s_nearbyint.S (__nearbyint): Save
and restore full floating-point state.
* sysdeps/powerpc/powerpc32/fpu/s_nearbyintf.S (__nearbyintf):
Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_nearbyint.S (__nearbyint):
Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_nearbyintf.S (__nearbyintf):
Likewise.
* math/test-nearbyint-except-2.c: New file.
* math/Makefile (tests): Add test-nearbyint-except-2.
This test applies to i386 and x86_64 which set R_386_GLOB_DAT and
R_X86_64_GLOB_DAT to ELF_RTYPE_CLASS_EXTERN_PROTECTED_DATA.
[BZ #19178]
* sysdeps/x86/Makefile (tests): Add tst-prelink.
(tst-prelink-ENV): New.
($(objpfx)tst-prelink-conflict.out): Likewise.
($(objpfx)tst-prelink-cmp.out): Likewise.
(tests-special): Add $(objpfx)tst-prelink-cmp.out.
* sysdeps/x86/tst-prelink.c: New file.
* sysdeps/x86/tst-prelink.exp: Likewise.
Prompted by a gcc-patches discussion, this patch adds tests of pow for
the cases where pow (x, 0.5) is required to return a different result
from sqrt (x), as those cases were previously missing from the tests
(although they worked correctly).
Tested for x86_64 and x86.
* math/auto-libm-test-in: Add another test of pow.
* math/auto-libm-test-out: Regenerated.
* math/libm-test.inc (pow_test_data): Add another test.
GLIBC fails to build for ia64 since commit d0d286d32d.
It is because this commit uses the internal definition for nearbyintl,
but ia64 specialized implementation (sysdeps/ia64/fpu/s_nearbyintl.S)
does not define it.
Tested with a ia64 build.
[BZ #19219]
* sysdeps/ia64/fpu/s_nearbyintl.S (__nearbyint): Define and
weak_alias to nearbyintl.
* elf/dl-load.c (_dl_map_object_from_fd): Add additional parameter
for original name of the DSO. Add it to the name list of the DSO
if it is actually given.
(_dl_map_object): Keep track of whether an audit module rewrote
the file name. If yes, pass the original name to
_dl_map_object_from_fd in a new parameter, otherwise NULL. When
debugging is enabled, log the change of the file name.
* sysdeps/mach/hur/dl-sysdep.c: Adjust commented-out call to
_dl_map_object_from_fd.
* elf/Makefile: Build and run tst-audit11 and tst-audit12.
* elf/tst-audit11.c: New file
* elf/tst-auditmod11.c: New file.
* elf/tst-audit11mod1.c: New file.
* elf/tst-audit11mod2.c: New file.
* elf/tst-audit11mod2.map: New file.
* elf/tst-audit12.c: New file
* elf/tst-auditmod12.c: New file.
* elf/tst-audit12mod1.c: New file.
* elf/tst-audit12mod2.c: New file.
* elf/tst-audit12mod2.map: New file.
* elf/tst-audit12mod3.c: New file.
For each function setjmp, longjmp, getcontext, there exist a symbol
<func> and a default/versioned symbol <func>@@GLIBC_2.x in the build
obj-files.
This is wrong because it should only exist an unversioned or a
default-versioned symbol with the same name in an obj-file.
Glibc can't be build with recent binutils. See the already fixed linker
bug https://sourceware.org/bugzilla/show_bug.cgi?id=19073.
Nevertheless, this patch cleans this up.
Furthermore the BSD entry points setjmp, _setjmp were marked as weak,
but should be strong as on other architectures.
(see https://sourceware.org/ml/libc-alpha/2014-07/msg00568.html for an
older discussion with Andreas Schwab)
Some whitespace issues are corrected in sysdeps/s390/s390-64/setjmp.S,
too. But there is no change in the assembler code.
ChangeLog:
* sysdeps/s390/longjmp.c (longjmp, _longjmp, siglongjmp):
Don't create weak aliases,
because versioned symbols are created later.
* sysdeps/s390/s390-32/setjmp.S
(setjmp, _setjmp): Remove weak and rename to an unique name
in SHARED case due to existing versioned symbols.
* sysdeps/s390/s390-64/setjmp.S: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/getcontext.S
(getcontext): Create weak alias only in non SHARED case.
* sysdeps/unix/sysv/linux/s390/s390-64/getcontext.S: Likewise.
this patch calls direct system calls for socket operations in the same way as power does. The system calls were introduced in kernel commit https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=977108f89c989b1eeb5c8d938e1e71913391eb5f.
There are no direct recv, send, accept syscalls available on s390. Thus
recvfrom, sendto, accept4 are called instead of the socketcall by defining __ASSUME_*_FOR_*_SYSCALL macros. See recv.c, send.c, accept.c in sysdeps/unix/sysv/linux/ folder.
The socketcalls in syscalls.list for s390-64 are removed. They were never used on s390x.
ChangeLog:
* sysdeps/unix/sysv/linux/s390/kernel-features.h:
(__ASSUME_*_SYSCALL) Define new macros.
* sysdeps/unix/sysv/linux/s390/s390-64/syscalls.list:
Remove socketcall syscalls.
* sysdeps/unix/sysv/linux/accept.c (__libc_accept):
Use accept4 if defined __ASSUME_ACCEPT4_FOR_ACCEPT_SYSCALL.
* sysdeps/unix/sysv/linux/recv.c (__libc_recv):
Use recvfrom if defined __ASSUME_RECVFROM_FOR_RECV_SYSCALL.
* sysdeps/unix/sysv/linux/send.c (__libc_send):
Use sendto if defined __ASSUME_SENDTO_FOR_SEND_SYSCALL.
The recvmsg system calls for netlink sockets have been particularly
prone to picking up unrelated data after a file descriptor race
(where the descriptor is closed and reopened concurrently in a
multi-threaded process, as the result of a file descriptor
management issue elsewhere). This commit adds additional error
checking and aborts the process if a datagram of unexpected length
(without the netlink header) is received, or an error code which
cannot happen due to the way the netlink socket is used.
[BZ #12926]
Terminate process on invalid netlink response.
* sysdeps/unix/sysv/linux/netlinkaccess.h
(__netlink_assert_response): Declare.
* sysdeps/unix/sysv/linux/netlink_assert_response.c: New file.
* sysdeps/unix/sysv/linux/Makefile [$(subdir) == inet]
(sysdep_routines): Add netlink_assert_response.
* sysdeps/unix/sysv/linux/check_native.c (__check_native): Call
__netlink_assert_response.
* sysdeps/unix/sysv/linux/check_pf.c (make_request): Likewise.
* sysdeps/unix/sysv/linux/ifaddrs.c (__netlink_request): Likewise.
* sysdeps/unix/sysv/linux/Versions (GLIBC_PRIVATE): Add
__netlink_assert_response.
prelink runs ld.so with the environment variable LD_TRACE_PRELINKING
set to dump the relocation type class from _dl_debug_bindings. prelink
has the following relocation type classes:
#define RTYPE_CLASS_VALID 8
#define RTYPE_CLASS_PLT (8|1)
#define RTYPE_CLASS_COPY (8|2)
#define RTYPE_CLASS_TLS (8|4)
where ELF_RTYPE_CLASS_EXTERN_PROTECTED_DATA has a conflict with
RTYPE_CLASS_TLS.
Since prelink only uses ELF_RTYPE_CLASS_PLT and ELF_RTYPE_CLASS_COPY
bits, we should clear the other bits when the DL_DEBUG_PRELINK bit is
set.
[BZ #19178]
* elf/dl-lookup.c (RTYPE_CLASS_VALID): New.
(RTYPE_CLASS_PLT): Likewise.
(RTYPE_CLASS_COPY): Likewise.
(RTYPE_CLASS_TLS): Likewise.
(_dl_debug_bindings): Use RTYPE_CLASS_TLS and RTYPE_CLASS_VALID
to set relocation type class for DL_DEBUG_PRELINK. Keep only
ELF_RTYPE_CLASS_PLT and ELF_RTYPE_CLASS_COPY bits for
DL_DEBUG_PRELINK.
I noticed a typo in the messages from the signgam tests I recently
added. This patch fixes it.
Tested for x86_64 and x86.
* math/test-signgam-finite.c (RUN_TESTS): Correct messages about
calls with argument -0.5.
* math/test-signgam-finite-c99.c (RUN_TESTS): Likewise.
There are configure tests for the linker -z nodelete, -z nodlopen and
-z initfirst options. These options were added in binutils 2.11, so
the tests are obsolete; this patch removes them.
Tested for x86_64 and x86 (testsuite, and that installed shared
libraries are unchanged by the patch).
* configure.ac (libc_cv_z_nodelete): Remove configure test.
(libc_cv_z_nodlopen): Likewise.
(libc_cv_z_initfirst): Likewise.
* configure: Regenerated.
The new format lists the version on each line, as in:
VERSION SYMBOL TYPE [VALUE]
This makes it easier to process the files with line-oriented tools.
The abilist files were converted with this awk script:
/^[^ ]/ { version = $1 }
/^ / { print version, substr($0, 2) }
And sorted under the "C" locale with sort.
This patch arranges for the libm-test tests to be run for the
finite-math-only function variants, in addition to the existing runs
for out-of-line and bits/mathinline.h inline variants.
gen-libm-test.pl is made to add a flag to all tests with non-finite
inputs or outputs so that they can be skipped at runtime when the
finite-math-only variants are being tested (skipping is for all
rounding modes; that is, -ffinite-math-only is being treated as
excluding overflow cases even when the rounding mode is such that the
overflowed result is finite). errno setting is not tested for these
variants (in general they don't set it, and it's
implementation-defined in ISO C whether it's set on underflow, with
the glibc definition being that it may not be for -ffinite-math-only;
other cases where errno would normally be expected to be set are
mostly excluded as having non-finite or overflowing arguments or
results).
As with the inline function tests, these ones are built with
-D__FINITE_MATH_ONLY=1 to select the function variants, rather than
-ffinite-math-only. Use of -ffinite-math-only would not be suitable
for these tests because it would also affect libm-test.inc code that
e.g. tests whether results are infinities or NaNs - if these function
variants have bugs that incorrectly produce such results, we want them
to show up in the tests, which means the compiler should not be
optimizing the tests on the basis of results being finite.
The finite-math-only functions share the same ulps settings as the
main out-of-line functions.
These interfaces were one significant group of untested ABIs listed at
<https://sourceware.org/ml/libc-alpha/2013-07/msg00386.html>. I
haven't rerun the script to list untested interfaces, but I expect
that the vast bulk of interfaces there are still untested and could do
with testcases being added (or, if applicable, being made compat
symbols; in general, most symbols not starting '_' are safe bets to
add tests for, while _* need more investigation of what the actual
public API is, if any). I'd like to encourage people to help reduce
the accumulation of untested interfaces by adding more tests.
Tested for x86_64 and x86. Given my recent lgamma/gamma and log*
fixes, the new tests pass (before those fixes, the new tests showed up
those bugs, so illustrating the practical utility of having tests for
these function variants).
* math/libm-test.inc (NON_FINITE): New macro.
(enable_test): Do not run tests flagged NON_FINITE if TEST_FINITE.
* math/gen-libm-test.pl (show_exceptions): Add argument
$non_finite.
(parse_args): Update call to show_exceptions.
* math/test-math-finite.h: New file.
* math/test-math-no-finite.h: Likewise.
* math/test-double-finite.c: Likewise.
* math/test-float-finite.c: Likewise.
* math/test-ldouble-finite.c: Likewise.
* math/test-double.c: Include "test-math-no-finite.h".
* math/test-float.c: Include "test-math-no-finite.h".
* math/test-ldouble.c: Include "test-math-no-finite.h".
* math/test-math-inline.h (TEST_FINITE): New macro.
* math/test-math-vector.h (TEST_FINITE): Likewise.
* math/Makefile (test-longdouble-yes): Add test-ldouble-finite.
(libm-tests): Add test-float-finite and test-double-finite.
($(objpfx)test-float-finite.o): New dependency on
$(objpfx)libm-test.stmp.
($(objpfx)test-double-finite.o): Likewise.
($(objpfx)test-ldouble-finite.o): Likewise.
(libm-test-no-inline-cflags): New variable.
(libm-test-finite-cflags): Likewise.
(CFLAGS-test-float-finite.c): Likewise.
(CFLAGS-test-double-finite.c): Likewise.
(CFLAGS-test-ldouble-finite.c): Likewise.
(CFLAGS-test-float.c): Use $(libm-test-no-inline-cflags).
(CFLAGS-test-double.c): Likewise.
(CFLAGS-test-ldouble.c): Likewise.
For the -ffinite-math-only versions of various x86_64 and x86 log*
functions, a zero result from log* (1) is returned with incorrect sign
in round-downward mode. This patch fixes this in a similar way to the
previous fixes for the non-*_finite versions of the functions.
Tested for x86_64 and x86 (including an i586 build), together with a
patch that will be applied separately to enable the main libm-test.inc
tests for the finite-math-only functions.
[BZ #19213]
* sysdeps/i386/fpu/e_log.S (__log_finite): Ensure +0 is always
returned for argument 1.
* sysdeps/i386/fpu/e_logf.S (__logf_finite): Likewise.
* sysdeps/i386/fpu/e_logl.S (__logl_finite): Likewise.
* sysdeps/i386/i686/fpu/e_logl.S (__logl_finite): Likewise.
* sysdeps/x86_64/fpu/e_log10l.S (__log10l_finite): Likewise.
* sysdeps/x86_64/fpu/e_log2l.S (__log2l_finite): Likewise.
* sysdeps/x86_64/fpu/e_logl.S (__logl_finite): Likewise.
The lgamma inline functions in bits/math-finite.h do not set signgam
if __USE_ISOC99, even when other feature test macros mean a standard
such as XSI POSIX is selected for which it should be set. (This is
essentially the opposite issue to bug 15421, the out-of-line versions
setting signgam even when they shouldn't.)
This patch fixes those functions to use __USE_MISC || __USE_XOPEN as
the condition for when to set signgam, since it's the condition for
when math.h declares signgam. The legacy gamma* names are only
declared at all if __USE_MISC || __USE_XOPEN, so they just set signgam
unconditionally.
Tests for certain standards or not using _GNU_SOURCE cannot use
test-skeleton.c (this is a known issue noted on the wiki todo list).
Thus, the new tests that signgam remains not set in ISO C modes do not
use test-skeleton.c. They also define _ISOMAC to avoid running into
declarations in the internal include/ headers that only work in
_GNU_SOURCE mode.
Tested for x86_64 and x86.
[BZ #19211]
* math/bits/math-finite.h (lgamma): Set signgam if [__USE_MISC ||
__USE_XOPEN], not if [!__USE_ISOC99].
(lgammaf): Likewise.
(lgammal): Likewise.
(gamma): Set signgam unconditionally, not if [!__USE_ISOC99].
(gammaf): Likewise.
(gammal): Likewise.
* math/test-signgam-finite-c11.c: New file.
* math/test-signgam-finite-c99.c: Likewise.
* math/test-signgam-finite.c: Likewise.
* math/Makefile (tests): Add test-signgam-finite,
test-signgam-finite-c99 and test-signgam-finite-c11.
(CFLAGS-test-signgam-finite.c): New variable.
(CFLAGS-test-signgam-finite-c99.c): Likewise.
(CFLAGS-test-signgam-finite-c11.c): Likewise.
features.h is not clean with -Wundef (for the installed header, of
course this only appears with -Wsystem-headers). In ISO C standards
modes, you get a series of warnings / errors relating to
_POSIX_C_SOURCE and _XOPEN_SOURCE not being defined when tested in
standards mode and uses #undef _GNU_SOURCE to avoid the default
_GNU_SOURCE from libc-symbols.h. This patch changes the relevant #if
conditionals to avoid these warnings / errors.
Tested for x86_64 and x86 (testsuite, and that installed shared
libraries are unchanged by the patch).
[BZ #19212]
* include/features.h [(_XOPEN_SOURCE - 0) >= 500]: Change
conditional to [defined _XOPEN_SOURCE && (_XOPEN_SOURCE - 0) >=
500].
[_POSIX_C_SOURCE >= 1]: Change conditional to [defined
_POSIX_C_SOURCE && _POSIX_C_SOURCE >= 1].
[(_POSIX_C_SOURCE - 0) >= 199309L]: Change conditional to [defined
_POSIX_C_SOURCE && (_POSIX_C_SOURCE - 0) >= 199309L].
[(_POSIX_C_SOURCE - 0) >= 199506L]: Change conditional to [defined
_POSIX_C_SOURCE && (_POSIX_C_SOURCE - 0) >= 199506L].
[(_POSIX_C_SOURCE - 0) >= 200112L]: Change conditional to [defined
_POSIX_C_SOURCE && (_POSIX_C_SOURCE - 0) >= 200112L].
[(_POSIX_C_SOURCE - 0) >= 200809L]: Change conditional to [defined
_POSIX_C_SOURCE && (_POSIX_C_SOURCE - 0) >= 200809L].
bits/math-finite.h maps ldexp functions to corresponding scalbn
functions. This is (a) a namespace bug for C90, which has ldexp but
not scalbn, and (b) in any case useless, since the ldexp and scalbn
functions have identical semantics (for floating-point types with
radix 2), and since the fix for bug 6803 are actually aliases
(presumably the mapping was based around the old bug of scalbn not
setting errno). This patch removes the bogus redirections.
Tested for x86_64 and x86.
[BZ #19209]
* math/bits/math-finite.h (ldexp): Remove declaration.
(ldexpf): Likewise.
(ldexpl): Likewise.
bits/math-finite.h declares -ffinite-math-only variants of various
functions under conditions not matching those under which the normal
versions are declared.
* math.h only ever includes bits/mathcalls.h to declare float and long
double functions if __USE_ISOC99, but bits/math-finite.h declares
some float functions regardless (long double ones are conditioned on
__MATH_DECLARE_LDOUBLE). (For C90 functions this isn't a
conformance bug because C90 reserves the float and long double
names, but is still contrary to good glibc practice. For some other
functions in older XSI standards it *is* a conformance bug.)
* Some functions are defined as inlines using lgamma_r functions under
conditions where those lgamma_r functions are not themselves
declared.
* hypot is declared under __USE_XOPEN || __USE_ISOC99 in
bits/mathcalls.h, __USE_ISOC99 only in bits/math-finite.h.
* float and long double versions of Bessel functions should be limited
to __USE_MISC (as in bug 18977).
* gamma should not be declared for __USE_XOPEN2K (as in bug 18967).
* remainder should be restricted to __USE_XOPEN_EXTENDED ||
__USE_ISOC99, not unconditional.
* scalb should not be declared for __USE_XOPEN2K8, and scalbf and
scalbl are non-POSIX (as in bug 18967).
This patch fixes all these issues (it doesn't seem worth splitting
them into separate patches or bugs). I put __USE_ISOC99 conditionals,
where needed, around both float and long double declarations, even
though formally redundant around the long double declarations because
__MATH_DECLARE_LDOUBLE isn't defined without __USE_ISOC99; it seemed
clearer that way. The missing declarations of lgamma_r functions are
dealt with by directly using declarations of __lgamma*_r_finite, in
the implementation namespace, rather than having the inlines rely on
asm redirection of lgamma*_r.
After this patch, there are some apparently redundant nested
__USE_ISOC99 conditionals in lgamma / gamma definitions. These
actually reflect a separate bug (the correct condition for the lgamma
inline functions to set signgam is __USE_MISC || __USE_XOPEN, the
condition under which signgam is declared, rather than disabling
setting it if __USE_ISOC99, which includes XSI POSIX versions for
which signgam *should* be set). They'll be fixed as part of a fix for
that bug, which will also add tests for these inlines. I've put a
note about more general conform/ test coverage for -ffinite-math-only
on
<https://sourceware.org/glibc/wiki/Development_Todo/Master#conformtest_improvements>,
alongside other options for which this is also relevant (some of which
have also had such bugs in the past relating to mismatched
conditionals).
I also intend to enable the main libm-test.inc tests for the
math-finite.h functions, but some other bugs in __*_finite need fixing
first.
[BZ #19205]
* math/bits/math-finite.h (acosf): Condition declaration on
[__USE_ISOC99].
(acosl): Likewise.
(acoshf): Likewise.
(acoshl): Likewise.
(asinf): Likewise.
(asinl): Likewise.
(atan2f): Likewise.
(atan2l): Likewise.
(atanhf): Likewise.
(atanhl): Likewise.
(coshf): Likewise.
(coshl): Likewise.
(expf): Likewise.
(expl): Likewise.
(fmodf): Likewise.
(fmodl): Likewise.
(hypot): Change condition to [__USE_XOPEN || __USE_ISOC99].
(j0f): Change condition to [__USE_MISC && __USE_ISOC99].
(j0l): Likewise.
(y0f): Likewise.
(y0l): Likewise.
(j1f): Likewise.
(j1l): Likewise.
(y1f): Likewise.
(y1l): Likewise.
(jnf): Likewise.
(jnl): Likewise.
(ynf): Likewise.
(ynl): Likewise.
(lgammaf_r): Condition declaration on [__USE_ISOC99].
(lgammal_r): Likewise.
(__lgamma_r_finite): New declaration.
(__lgammaf_r_finite): Likewise.
(__lgammal_r_finite): Likewise.
(lgamma): Use __lgamma_r_finite.
(lgammaf): Condition definition on [__USE_ISOC99]. Use
__lgammaf_r_finite.
(lgammal): Condition definition on [__USE_ISOC99]. Use
__lgammal_r_finite.
(gamma): Do not define for [!__USE_MISC && __USE_XOPEN2K]. Use
__lgamma_r_finite.
(gammaf): Condition definition on [__USE_ISOC99]. Use
__lgammaf_r_finite.
(gammal): Condition definition on [__USE_ISOC99]. Use
__lgammal_r_finite.
(logf): Condition declaration on [__USE_ISOC99].
(logl): Likewise.
(log10f): Likewise.
(log10l): Likewise.
(ldexpf): Likewise.
(ldexpl): Likewise.
(powf): Likewise.
(powl): Likewise.
(remainder): Condition declaration on [__USE_XOPEN_EXTENDED ||
__USE_ISOC99].
(remainderf): Condition declaration on [__USE_ISOC99].
(remainderl): Likewise.
(scalb): Do not declare for [!__USE_MISC && __USE_XOPEN2K8].
(scalbf): Change condition to [__USE_MISC && __USE_ISOC99].
(scalbl): Likewise.
(sinhf): Condition declaration on [__USE_ISOC99].
(sinhl): Likewise.
(sqrtf): Likewise.
(sqrtl): Likewise.
This patch refactors how libm-test.inc handles disabling
errno/exception handling tests, and some other tests, for
__FAST_MATH__ inline function tests.
The macro TEST_INLINE is changed from being defined/undefined to being
defined to 1 or 0, so that it can be tested in "if" conditionals
instead of #if. For tests of errno and exception setting, separate
macros TEST_ERRNO and TEST_EXCEPTIONS are added, and TEST_ERRNO is
also used in the disabling of errno testing for vector function
tests. The relevant conditionals are moved up a function, so that
they take effect before the code that counts the number of tests, so
the inline function tests now accurately report that 0 tests for
exceptions and errno were executed (whereas they previously reported a
large number desipte not running any such tests).
Tested for x86_64 and x86.
* math/test-math-errno.h: New file.
* math/test-math-inline.h (TEST_INLINE): Define to 1 instead of
empty.
(TEST_ERRNO): New macro.
(TEST_EXCEPTIONS): Likewise.
* math/test-math-no-inline.h (TEST_INLINE): Likewise.
(TEST_EXCEPTIONS): Likewise.
* math/test-math-vector.h (TEST_ERRNO): Likewise.
* math/test-double.c: Include "test-math-errno.h".
* math/test-float.c: Likewise.
* math/test-ldouble.c: Likewise.
* math/libm-test.inc (test_single_exception) [!TEST_INLINE]: Make
code unconditional.
(test_exceptions): Only run code if TEST_EXCEPTIONS.
(test_single_errno) [!TEST_INLINE && !TEST_MATHVEC]: Make code
unconditional.
(test_errno): Only run code if TEST_ERRNO.
(enable_test): Use "if" conditional on TEST_INLINE, not #ifdef.
There is a configure test for the --no-whole-archive linker option.
This option was added in binutils 2.7, so the test is obsolete; this
patch removes it.
Tested for x86_64 and x86 (testsuite, and that installed shared
libraries are unchanged by the patch).
* configure.ac (libc_cv_ld_no_whole_archive): Remove configure
test.
* configure: Regenerated.
This patch improves the libm test coverage for a few more functions.
Tested for x86_64 and x86.
* math/libm-test.inc (modf_test_data): Add more tests.
(nearbyint_test_data): Likewise.
(nextafter_test_data): Likewise.
(nexttoward_test_data): Likewise.
(pow_test_data): Likewise.
(remainder_test_data): Likewise.
(remquo_test_data): Likewise.
(rint_test_data): Likewise.
For some large arguments, the dbl-64 implementation of remainder gives
zero results with the wrong sign, resulting from a subtraction that is
mathematically correct but does not guarantee that a zero result has
the sign of the first argument to remainder. This patch adds an
appropriate check for this case, similar to other implementations of
remainder in the case of equality, and adds tests of remainder on
inputs already used to test remquo.
Tested for x86_64 and x86.
[BZ #19201]
* sysdeps/ieee754/dbl-64/e_remainder.c (__ieee754_remainder):
Check for zero remainder in case of large exponents and ensure
correct sign of result in that case.
* math/libm-test.inc (remainder_test_data): Add more tests.
nextafter and nexttoward fail to set errno on overflow and underflow.
This patch makes them do so in cases that should include all the cases
where such errno setting is required by glibc's goals for when to set
errno (but not all cases of underflow where the result is nonzero and
so glibc's goals do not require errno setting).
Tested for x86_64, x86, mips64 and powerpc.
[BZ #6799]
* math/s_nextafter.c: Include <errno.h>.
(__nextafter): Set errno on overflow and underflow.
* math/s_nexttowardf.c: Include <errno.h>.
(__nexttowardf): Set errno on overflow and underflow.
* sysdeps/i386/fpu/s_nextafterl.c: Include <errno.h>.
(__nextafterl): Set errno on overflow and underflow.
* sysdeps/i386/fpu/s_nexttoward.c: Include <errno.h>.
(__nexttoward): Set errno on overflow and underflow.
* sysdeps/i386/fpu/s_nexttowardf.c: Include <errno.h>.
(__nexttowardf): Set errno on overflow and underflow.
* sysdeps/ieee754/flt-32/s_nextafterf.c: Include <errno.h>.
(__nextafterf): Set errno on overflow and underflow.
* sysdeps/ieee754/ldbl-128/s_nextafterl.c: Include <errno.h>.
(__nextafterl): Set errno on overflow and underflow.
* sysdeps/ieee754/ldbl-128/s_nexttoward.c: Include <errno.h>.
(__nexttoward): Set errno on overflow and underflow.
* sysdeps/ieee754/ldbl-128/s_nexttowardf.c: Include <errno.h>.
(__nexttowardf): Set errno on overflow and underflow.
* sysdeps/ieee754/ldbl-128ibm/s_nextafterl.c: Include <errno.h>.
(__nextafterl): Set errno on overflow and underflow.
* sysdeps/ieee754/ldbl-128ibm/s_nexttoward.c: Include <errno.h>.
(__nexttoward): Set errno on overflow and underflow.
* sysdeps/ieee754/ldbl-128ibm/s_nexttowardf.c: Include <errno.h>.
(__nexttowardf): Set errno on overflow and underflow.
* sysdeps/ieee754/ldbl-96/s_nexttoward.c: Include <errno.h>.
(__nexttoward): Set errno on overflow and underflow.
* sysdeps/ieee754/ldbl-96/s_nexttowardf.c: Include <errno.h>.
(__nexttowardf): Set errno on overflow and underflow.
* sysdeps/ieee754/ldbl-opt/s_nexttowardfd.c: Include <errno.h>.
(__nldbl_nexttowardf): Set errno on overflow and underflow.
* sysdeps/m68k/m680x0/fpu/s_nextafterl.c: Include <errno.h>.
(__nextafterl): Set errno on overflow and underflow.
* math/libm-test.inc (nextafter_test_data): Do not allow errno
setting to be missing on overflow. Add more tests.
(nexttoward_test_data): Likewise.
There is a configure test "for .preinit_array/.init_array/.fini_array
support". Support for this feature was added in binutils 2.13, so the
configure test is obsolete; this patch removes it.
Tested for x86_64 and x86 (testsuite, and that installed shared
libraries are unchanged by the patch).
* configure.ac (libc_cv_initfini_array): Remove configure test.
* configure: Regenerated.
The ldbl-128 version of log1pl raises a spurious "invalid" exception
for a -qNaN argument. This patch fixes this by making the initial
check for infinities and NaNs handle arguments of both signs in such a
way that NaNs result in a NaN being returned (quietly if the input NaN
was quiet) while +Inf results in +Inf being returned and -Inf results
in a qNaN being returned with "invalid" exception raised.
Tested for mips64.
[BZ #19189]
* sysdeps/ieee754/ldbl-128/s_log1pl.c (__log1pl): Make check for
non-finite argument handle arguments with negative sign.
When Bessel functions return a zero result from an infinite argument,
the function oscillates as it approaches 0, so the sign of that zero
result should be indeterminate. This patch weakens the expectations
accordingly not to check the sign of such results (the tests were
causing spurious failures for j1 (-Inf) for ldbl-128).
Tested for x86_64 and x86.
* math/libm-test.inc (j0_test_data): Do not test sign of zero
result from infinite argument.
(j1_test_data): Likewise.
(jn_test_data): Likewise.
(y0_test_data): Likewise.
(y1_test_data): Likewise.
(yn_test_data): Likewise.
The libm drem functions just call the corresponding __remainder
functions. This patch removes the unnecessary wrappers by making them
into weak aliases at the ELF level.
Tested for x86_64, x86, mips64 and powerpc.
[BZ #16171]
* math/w_remainder.c (drem): Define as weak alias of __remainder.
[NO_LONG_DOUBLE] (dreml): Define as weak alias of __remainder.
* math/w_remainderf.c (dremf): Define as weak alias of
__remainderf.
* math/w_remainderl.c (dreml): Define as weak alias of
__remainderl.
* sysdeps/ia64/fpu/e_remainder.S (drem): Define as weak alias of
__remainder.
* sysdeps/ia64/fpu/e_remainderf.S (dremf): Define as weak alias of
__remainderf.
* sysdeps/ia64/fpu/e_remainderl.S (dreml): Define as weak alias of
__remainderl.
* sysdeps/ieee754/ldbl-opt/nldbl-remainder.c (dreml): Define as
weak alias of remainderl.
* sysdeps/ieee754/ldbl-opt/w_remainder.c
[LONG_DOUBLE_COMPAT(libm, GLIBC_2_0)] (__drem): Define as strong
alias of __remainder.
[LONG_DOUBLE_COMPAT(libm, GLIBC_2_0)] (dreml): Use compat_symbol.
* sysdeps/ieee754/ldbl-opt/w_remainderl.c (__dreml): Define as
strong alias of __remainderl.
(dreml): Use long_double_symbol.
* math/Makefile (libm-calls): Remove w_drem.
* sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Remove drem.
(CFLAGS-nldbl-drem.c): Remove variable.
(CFLAGS-nldbl-remainder.c): Add -fno-builtin-dreml.
* math/w_drem.c: Remove file.
* math/w_dremf.c: Likewise.
* math/w_dreml.c: Likewise.
* sysdeps/ieee754/ldbl-opt/nldbl-drem.c: Likewise.
* sysdeps/ieee754/ldbl-opt/w_drem.c: Likewise.
* sysdeps/ieee754/ldbl-opt/w_dreml.c: Likewise.
There are configure tests for the cpuid.h header for x86 / x86_64.
GCC 4.3 and later install this header, so those tests are obsolete.
This patch removes them.
Tested for x86_64 and x86 (testsuite, and that installed shared
libraries are unchanged by the patch).
* sysdeps/i386/configure.ac (cpuid.h): Do not test for header.
* sysdeps/i386/configure: Regenerated.
* sysdeps/x86_64/configure.ac (cpuid.h): Do not test for header.
* sysdeps/x86_64/configure: Regenerated.
There are various configure tests for visibility support in the
compiler and assember.
GCC support for visibility attributes was added in GCC 3.3. I don't
know what specific fix was intended by the test "for broken
__attribute__((visibility())", but it was added by
<https://sourceware.org/ml/libc-hacker/2002-08/msg00030.html>, and GCC
3.3 appears not to have that breakage, so I suspect it was only ever
in development versions before 3.3 was released. The assembler
support was added in binutils 2.10.
This patch removes the tests in question as obsolete. Two tests that
were formerly conditional on "if test $libc_cv_visibility_attribute =
yes", including the one for linker support for protected data, are now
unconditional.
Tested for x86_64 and x86 (testsuite, and that installed shared
libraries are unchanged by the patch).
* configure.ac (libc_cv_asm_protected_directive): Remove configure
test.
(libc_cv_visibility_attribute): Likewise.
(libc_cv_protected_data): Test unconditionally.
(libc_cv_broken_visibility_attribute): Remove configure test.
(libc_cv_have_sdata_section): Test unconditionally.
* configure: Regenerated.
Now that we build with -std=gnu11 and can rely on a compiler providing
max_align_t in <stddef.h>, we no longer need our own version
libc_max_align_t. This patch removes it and replaces the single user
with a use of max_align_t.
Tested for x86_64 and x86 (testsuite, and that installed stripped
shared libraries are unchanged by the patch for x86_64; for x86, I see
some code reordering of no significance).
* include/libc-internal.h (libc_max_align_t): Remove typedef.
* include/scratch_buffer.h: Include <stddef.h> instead of
<libc-internal.h>.
(struct scratch_buffer): Use max_align_t instead of
libc_max_align_t.
In this case, extend_alloca is used to work around the lack of
deallocation on scope exit. A VLA is automatically deallocated in this
way, so it is the more fitting approach.
To implement this, it is necessary to eliminate the goto. In addition,
this change eliminates the trivially-true assert; the assert is always
skipped if nloaded > 0.
* elf/dl-fini.c (_dl_fini): Rewrite to use variable-length array
instead of extend_alloca. Change control flow to avoid a goto.
Remove assert which is trivially always true.
fenv_t should include architecture-specific floating-point modes and
status flags. i386 and x86_64 fesetenv limit which bits they use from
the x87 status and control words, when using saved state, and limit
which parts of the state they set to fixed values, when using
FE_DFL_ENV / FE_NOMASK_ENV. The following should be included but are
excluded in at least some cases: status and masking for the "denormal
operand" exception (which isn't part of FE_ALL_EXCEPT); precision
control (explicitly mentioned in Annex F as something that counts as
part of the floating-point environment); MXCSR FZ and DAZ bits (for
FE_DFL_ENV and FE_NOMASK_ENV). This patch arranges for this extra
state to be handled by fesetenv (and thereby by feupdateenv, which
calls fesetenv).
(Note that glibc functions using floating point are not generally
expected to work correctly with non-default values of this state,
especially precision control, but it is still logically part of the
floating-point environment and should be handled as such by fesetenv.
Changes to the state relating to subnormals ought generally to work
with libm functions when the arguments aren't subnormal and neither
are the expected results; that's a consequence of functions avoiding
spurious internal underflows.)
A question arising from this is whether FE_NOMASK_ENV should or should
not mask the "denormal operand" exception. I decided it should mask
that exception. This is the status quo - previously that exception
could only be unmasked by direct manipulation of control registers
(possibly via <fpu_control.h>). In addition, it means that use of
FE_NOMASK_ENV leaves a floating-point environment the same as could be
obtained by fesetenv (FE_DFL_ENV); feenableexcept (FE_ALL_EXCEPT);,
rather than an environment in which an exception is unmasked that
could only be masked again by using fesetenv with FE_DFL_ENV (or a
previously saved environment) - this exception not being usable with
other <fenv.h> functions because it's outside FE_ALL_EXCEPT.
Tested for x86_64 and x86.
[BZ #16068]
* sysdeps/i386/fpu/fesetenv.c: Include <fpu_control.h>.
(FE_ALL_EXCEPT_X86): New macro.
(__fesetenv): Use FE_ALL_EXCEPT_X86 in most places instead of
FE_ALL_EXCEPT. Ensure precision control is included in
floating-point state. Ensure that FE_DFL_ENV and FE_NOMASK_ENV
handle "denormal operand exception" and clear FZ and DAZ bits.
* sysdeps/x86_64/fpu/fesetenv.c: Include <fpu_control.h>.
(FE_ALL_EXCEPT_X86): New macro.
(__fesetenv): Use FE_ALL_EXCEPT_X86 in most places instead of
FE_ALL_EXCEPT. Ensure precision control is included in
floating-point state. Ensure that FE_DFL_ENV and FE_NOMASK_ENV
handle "denormal operand exception" and clear FZ and DAZ bits.
* sysdeps/x86/fpu/test-fenv-sse-2.c: New file.
* sysdeps/x86/fpu/test-fenv-x87.c: Likewise.
* sysdeps/x86/fpu/Makefile [$(subdir) = math] (tests): Add
test-fenv-x87 and test-fenv-sse-2.
[$(subdir) = math] (CFLAGS-test-fenv-sse-2.c): New variable.
libm-test.inc has a macro BUILD_COMPLEX to construct a complex number
with given real and imaginary parts while allowing properly for signed
zeroes, infinities and NaNs (which don't work properly with a simple
real + I * imag, in the absence of compiler support for imaginary
types), using assignment to __real__ and __imag__ parts of the number.
C11 defines CMPLX* macros for this purpose, which GCC 4.7 and above
provide suitable built-in functions for. This patch redefines
BUILD_COMPLEX in terms of the standard macros.
Tested for x86_64 and x86.
* math/libm-test.inc (BUILD_COMPLEX): Remove macro.
* math/test-double.h (BUILD_COMPLEX): New macro.
* math/test-float.h (BUILD_COMPLEX): Likewise.
* math/test-ldouble.h (BUILD_COMPLEX): Likewise.
C11 defines standard <float.h> macros *_TRUE_MIN for the least
positive subnormal value of a type. Now that we build with
-std=gnu11, we can use these macros in glibc. This patch replaces
previous uses of the GCC predefines __*_DENORM_MIN__ (used in
<float.h> to define *_TRUE_MIN), as well as *_DENORM_MIN references in
comments.
Tested for x86_64 and x86 (testsuite, and that installed shared
libraries are unchanged by the patch). Also tested for powerpc that
installed stripped shared libraries are unchanged by the patch.
* math/libm-test.inc (min_subnorm_value): Use LDBL_TRUE_MIN,
DBL_TRUE_MIN and FLT_TRUE_MIN instead of __LDBL_DENORM_MIN__,
__DBL_DENORM_MIN__ and __FLT_DENORM_MIN__.
* sysdeps/ieee754/dbl-64/s_fma.c (__fma): Refer to DBL_TRUE_MIN
instead of DBL_DENORM_MIN in comment.
* sysdeps/ieee754/ldbl-128/s_fmal.c (__fmal): Refer to
LDBL_TRUE_MIN instead of LDBL_DENORM_MIN in comment.
* sysdeps/ieee754/ldbl-128ibm/s_nextafterl.c: Include <float.h>.
(__nextafterl): Use LDBL_TRUE_MIN instead of __LDBL_DENORM_MIN__.
* sysdeps/ieee754/ldbl-96/s_fmal.c (__fmal): Refer to
LDBL_TRUE_MIN instead of LDBL_DENORM_MIN in comment.
The i386 and x86_64 versions of fesetenv, when called with FE_DFL_ENV
or FE_NOMASK_ENV as argument, do not clear SSE exceptions raised in
MXCSR. These arguments should, like other fenv_t values, represent
the whole of the floating-point state, so such exceptions should be
cleared; this patch adds the required clearing. (Discovered while
working on bug 16068.)
Tested for x86_64 and x86.
[BZ #19181]
* sysdeps/i386/fpu/fesetenv.c (__fesetenv): Clear already-raised
SSE exceptions when argument is FE_DFL_ENV or FE_NOMASK_ENV.
* sysdeps/x86_64/fpu/fesetenv.c (__fesetenv): Likewise.
* math/test-fenv-clear-main.c: New file.
* math/test-fenv-clear.c: Likewise.
* math/Makefile (tests): Add test-fenv-clear.
* sysdeps/x86/fpu/test-fenv-clear-sse.c: New file.
* sysdeps/x86/fpu/Makefile [$(subdir) = math] (tests): Add
test-fenv-clear-sse.
[$(subdir) = math] (CFLAGS-test-fenv-clear-sse.c): New variable.
Now that we build with -std=gnu11, we can use C11 <float.h> macros
such as FLT_DECIMAL_DIG instead of the GCC predefines such as
__FLT_DECIMAL_DIG__ that are used internally in <float.h>. This patch
makes libm-test.inc do so.
Tested for x86_64 and x86.
* math/libm-test.inc (TYPE_DECIMAL_DIG): Use LDBL_DECIMAL_DIG,
DBL_DECIMAL_DIG and FLT_DECIMAL_DIG instead of __DECIMAL_DIG__,
__DBL_DECIMAL_DIG__ and __FLT_DECIMAL_DIG__.
Since '--no-tls-optimize' is available for Power in ld, we need to provide
__tls_get_addr () in static libc in order to avoid undefined references to this
symbol when that flag is used.
* sysdeps/powerpc/libc-tls.c: New file. Provides __tls_get_addr () in
static libc.
There are configure tests for the -mavx2 compiler option. AVX2
support was added in GCC 4.7, so these tests are now obsolete; this
patch removes them.
Tested for x86_64 and x86 (testsuite, and that installed stripped
shared libraries are unchanged by the patch).
* sysdeps/i386/configure.ac (libc_cv_cc_avx2): Remove configure
test.
* sysdeps/i386/configure: Regenerated.
* sysdeps/x86_64/configure.ac (libc_cv_cc_avx2): Remove configure
test.
* sysdeps/x86_64/configure: Regenerated.
* config.h.in (HAVE_AVX2_SUPPORT): Remove #undef.
* sysdeps/x86_64/multiarch/Makefile (sysdep_routines): Add
memset-avx2 unconditionally instead of conditionally on
[$(config-cflags-avx2) = yes].
* sysdeps/x86_64/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list) [HAVE_AVX2_SUPPORT]: Make code
unconditional.
* sysdeps/x86_64/multiarch/memset.S [HAVE_AVX2_SUPPORT]: Likewise.
* sysdeps/x86_64/multiarch/memset_chk.S
[IS_IN (libc) && SHARED && HAVE_AVX2_SUPPORT]: Change conditional
to [IS_IN (libc) && SHARED].
GCC 4.7 added support for ARM TLS descriptors. The binutils support
is present in binutils 2.22. Thus, this patch removes the associated
configure test as obsolete (leaving Makefile conditionals, as NaCl
sets have-arm-tls-desc = no in its sysdeps fragment).
Tested for ARM that installed shared libraries are unchanged by the
patch.
* sysdeps/arm/configure.ac (libc_cv_arm_tls_desc): Remove
configure test.
* sysdeps/arm/configure: Regenerated.
* sysdeps/arm/Makefile [!have-arm-tls-desc] (have-arm-tls-desc):
Define variable if not already defined.
MIPS16 atomics used __sync_* with GCC before 4.7, which as noted in
bug 17404 is missing the required barrier semantics for
atomic_exchange_rel. This patch removes the code in question as dead
now GCC before 4.7 is no longer supported for building glibc.
Sanity tested with builds for MIPS.
[BZ #17404]
* sysdeps/mips/atomic-machine.h
[__GNUC_PREREQ (4, 8) || (__mips16 && __GNUC_PREREQ (4, 7))]:
Change conditional to [__GNUC_PREREQ (4, 8) || __mips16].
[__mips16 && !__GNUC_PREREQ (4, 7)]: Remove conditional code.
One common case of __GNUC_PREREQ (4, 7) conditionals is use of
diagnostic control pragmas for -Wmaybe-uninitialized, an option
introduced in GCC 4.7 where older GCC needed -Wuninitialized to be
controlled instead if the warning appeared with older GCC. This patch
removes such conditionals.
(There remain several older uses of -Wno-uninitialized in makefiles
that still need to be converted to diagnostic control pragmas if the
issue is still present with current sources and supported GCC
versions, and it's likely that in most cases those pragmas also will
end up controlling -Wmaybe-uninitialized.)
Tested for x86_64 and x86 (testsuite, and that installed stripped
shared libraries are unchanged by the patch, except for libresolv
since res_send.c contains assertions whose line numbers are changed by
the patch).
* resolv/res_send.c (send_vc) [__GNUC_PREREQ (4, 7)]: Make code
unconditional.
* soft-fp/fmadf4.c [__GNUC_PREREQ (4, 7)]: Likewise.
[!__GNUC_PREREQ (4, 7)]: Remove conditional code.
* soft-fp/fmasf4.c [__GNUC_PREREQ (4, 7)]: Make code
unconditional.
[!__GNUC_PREREQ (4, 7)]: Remove conditional code.
* soft-fp/fmatf4.c [__GNUC_PREREQ (4, 7)]: Make code
unconditional.
[!__GNUC_PREREQ (4, 7)]: Remove conditional code.
* stdlib/setenv.c
[((__GNUC__ << 16) + __GNUC_MINOR__) >= ((4 << 16) + 7)]: Make
code unconditional.
[!(((__GNUC__ << 16) + __GNUC_MINOR__) >= ((4 << 16) + 7))]:
Remove conditional code.
* sysdeps/ieee754/dbl-64/e_lgamma_r.c
(__ieee754_lgamma_r) [__GNUC_PREREQ (4, 7)]: Make code
unconditional.
(__ieee754_lgamma_r) [!__GNUC_PREREQ (4, 7)]: Remove conditional
code.
* sysdeps/ieee754/flt-32/e_lgammaf_r.c
(__ieee754_lgammaf_r) [__GNUC_PREREQ (4, 7)]: Make code
unconditional.
(__ieee754_lgammaf_r) [!__GNUC_PREREQ (4, 7)]: Remove conditional
code.
* sysdeps/ieee754/ldbl-128/k_tanl.c
(__kernel_tanl) [__GNUC_PREREQ (4, 7)]: Make code unconditional.
(__kernel_tanl) [!__GNUC_PREREQ (4, 7)]: Remove conditional code.
* sysdeps/ieee754/ldbl-128ibm/k_tanl.c
(__kernel_tanl) [__GNUC_PREREQ (4, 7)]: Make code unconditional.
(__kernel_tanl) [!__GNUC_PREREQ (4, 7)]: Remove conditional code.
* sysdeps/ieee754/ldbl-96/e_lgammal_r.c
(__ieee754_lgammal_r) [__GNUC_PREREQ (4, 7)]: Make code
unconditional.
(__ieee754_lgammal_r) [!__GNUC_PREREQ (4, 7)]: Remove conditional
code.
* sysdeps/ieee754/ldbl-96/k_tanl.c
(__kernel_tanl) [__GNUC_PREREQ (4, 7)]: Make code unconditional.
(__kernel_tanl) [!__GNUC_PREREQ (4, 7)]: Remove conditional code.
NPTL has tests that initializers work with various -std= options. Now
that we can rely on -std=gnu11 and -std=c11 being available, this
patch adds versions of those tests for those options.
Tested for x86_64 and x86 (testsuite).
* nptl/tst-initializers1-c11.c: New file.
* nptl/tst-initializers1-gnu11.c: Likewise.
* nptl/Makefile (tests): Add these new tests.
(CFLAGS-tst-initializers1-c11.c): New variable.
(CFLAGS-tst-initializers1-gnu11.c): Likewise.
Now that GCC 4.7 or later is required to build glibc, this patch moves
the build from using -std=gnu99 to -std=gnu11 (option added in 4.7).
This allows use of C11 features from GCC's headers, such as new
float.h macros and max_align_t.
Tested for x86_64 and x86 (testsuite; installed stripped shared
libraries are unchanged by the patch on x86_64, while I see some
slight code reordering of no significance on x86).
* Makeconfig (CFLAGS): Use -std=gnu11 instead of -std=gnu99.
* Makefile ($(objpfx)c++-types-check.out): Filter out -std=gnu11
instead of -std=gnu99.
* configure.ac (systemtap): Test with -std=gnu11 instead of
-std=gnu99.
* configure: Regenerated.
* math/gen-auto-libm-tests.c: Use -std=gnu11 instead of -std=gnu99
in compilation command in comment.
sysdeps/nptl/configure.ac tests for forced unwind support and the C
cleanup attribute, giving errors if either is unsupported. It does
nothing beyond running those two tests.
Both the attribute, and _Unwind_GetCFA which is used in the forced
unwind test, were added in GCC 3.3. Thus these tests are long
obsolete, and this patch removes the configure fragment running them,
along with associated conditionals.
Tested for x86_64 and x86 (testsuite, and that installed stripped
shared libraries are unchanged by the patch).
* sysdeps/nptl/configure.ac: Remove file.
* sysdeps/nptl/configure: Remove generated file.
* configure.ac (libc_cv_forced_unwind): Do not substitute.
* configure: Regenerated.
* config.h.in (HAVE_FORCED_UNWIND): Remove #undef.
* config.make.in (have-forced-unwind): Remove variable.
* nptl/Makefile [$(have-forced-unwind) = yes]: Make code
unconditional.
* nptl/descr.h [HAVE_FORCED_UNWIND]: Likewise.
* nptl/unwind.c [HAVE_FORCED_UNWIND]: Likewise.
(__pthread_unwind) [!HAVE_FORCED_UNWIND]: Remove conditional code.
* nptl/version.c [HAVE_FORCED_UNWIND]: Make code unconditional.
* sysdeps/nptl/Makefile [$(have-forced-unwind) = yes]: Make code
unconditional.
The skip_lock_out_of_tbegin_retries adaptive parameter was
not being used correctly, nor as described. This prevents
a fallback for all users of the lock if a transient abort
occurs within the accepted number of retries.
[BZ #19174]
* sysdeps/powerpc/nptl/elide.h (__elide_lock): Fix usage of
.skip_lock_out_of_tbegin_retries.
* sysdeps/unix/sysv/linux/powerpc/elision-lock.c
(__lll_lock_elision): Likewise, and respect a value of
try_tbegin <= 0.
Added AT_PLATFORM to _dl_aux_init () function to keep it in sync with
_dl_sysdep_start ().
* elf/dl-support.c (_dl_aux_init): Added AT_PLATFORM to the case
statement.
Now that GCC 4.7 or later is required to build glibc, this patch
removes three conform/ test XFAILs that related to missing C11 support
in GCC 4.6.
Tested for x86_64 and x86 (conform/ tests).
* conform/Makefile (test-xfail-ISO11/complex.h/conform): Remove
variable.
(test-xfail-ISO11/stdalign.h/conform): Likewise.
(test-xfail-ISO11/stdnoreturn.h/conform): Likewise.
Now that GCC 4.7 or later is required to build glibc, this patch makes
the conformance tests use -std=c11 for C11 tests instead of -std=c1x
-D_ISOC11_SOURCE.
Tested for x86_64 and x86 (conform/ tests).
* conform/GlibcConform.pm ($CFLAGS{"ISO11"}): Use -std=c11 instead
of -std=c1x -D_ISOC11_SOURCE.
This patch implements a requirement of GCC 4.7 or later to build
glibc.
This was discussed in the thread starting at
<https://sourceware.org/ml/libc-alpha/2015-08/msg00851.html>.
Concerns were expressed by Mike and David. At
<https://sourceware.org/ml/libc-alpha/2015-10/msg00453.html> I have
provided a 14-patch series showing in outline the cleanups facilitated
by this version requirement, as requested by Mike (this patch is the
first in that series, with the addition of a NEWS entry). Given the
absence of further concerns or alternative proposals for criteria for
updates to this version requirement as requested in
<https://sourceware.org/ml/libc-alpha/2015-10/msg00065.html>, I am
interpreting this as "absence of sustained opposition" under Carlos's
definition at <https://sourceware.org/glibc/wiki/Consensus> and
proposing this patch for inclusion in glibc. I'd like to remind
people testing with 4.6 that if they move to testing with GCC 5 then
it will probably be about four years before they need to update the
compiler they use to test glibc again.
Although on the principles of time-based updates I think a move to
requiring binutils 2.23 would be reasonable, I'm not currently aware
of any cleanups that would facilitate so am not proposing that at this
time (but would expect to propose a move to requiring binutils 2.24 in
a year's time, as that brings features such as AVX512 support that
should allow some conditionals to be cleaned up). If someone thinks a
move to requiring 2.23 would help clean things up for their
architecture, please speak up. (And in general, I suspect there are
lots of architecture-specific configure tests that could be removed on
the basis of current GCC and binutils version requirements, given how
I've found architecture-independent tests obsolete on the basis of
version requirements going back 20 years.)
Tested for x86_64 and x86 (testsuite, and that installed shared
libraries are unchanged by the patch).
* configure.ac (libc_cv_compiler_ok): Require GCC 4.7 or later.
* configure: Regenerated.
* manual/install.texi (Tools for Compilation): Document
requirement for GCC 4.7 or later.
* INSTALL: Regenerated.
There seemed to be support in response to
<https://sourceware.org/ml/libc-alpha/2015-10/msg00510.html> for
removing configure tests that exist only to produce errors, where we
expect that tool versions failing the tests would also fail the tests
of minimum GCC / binutils versions.
This patch removes the tests for TLS support as one instance of such
tests. Since the addition of TLS emulation support in GCC 4.3, I
don't think these tests would have failed even if proper TLS support
(as required by glibc) was missing in that architecture's GCC back
end, so any new glibc ports wanting a substantive test (if there are
actual GCC or binutils versions for those architectures, with
supported version numbers, missing TLS support) would have needed an
architecture-specific test anyway.
Tested for x86_64 and x86 (testsuite, and that installed shared
libraries are unchanged by the patch).
* configure.ac (libc_cv_gcc___thread): Remove configure test.
(libc_cv_gcc_tls_model_attr): Likewise.
* configure: Regenerated.
There is a configure test for "whether we need to use -P to assemble
.S files".
I think this test is long obsolete. I don't have a specific reference
to a binutils change or version that obsoleted this test, but: (a) we
only support GNU binutils; (b) it looks like every architecture
supported by glibc has '#' as a line comment character in its gas
port; (c) in any case, if the (compiler, assembler) combination in use
cannot compile a .S file without special options, that would clearly
be a substantially broken combination, which I don't think we need to
allow for at all.
The test in question was added by:
Thu Jan 27 16:46:03 1994 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
* configure.in (asm-CPPFLAGS): Add new check to see if assembling
a .S file loses without -P. If so, set asm-CPPFLAGS=-P in config.make.
This patch removes the test and the reference to this issue in the
comment on the default empty definition of asm-CPPFLAGS. (Various
other settings of asm-CPPFLAGS remain in sysdeps Makefile fragments.)
Tested for x86_64 and x86 (testsuite, and that installed shared
libraries are unchanged by the patch).
* configure.ac (libc_cv_need_minus_P): Remove configure test.
* configure: Regenerated.
* Makeconfig (asm-CPPFLAGS): Remove reference to -P in comment.
There is a configure test for the presence of glibc 2.0 headers (that
were renamed / no longer installed in glibc 2.1) and associated
support for removing them on "make install".
Normal practice for subsequent removal / renaming of installed files
has been not to do anything special about removing them; if you want
installed files from an old installation removed reliably, you need to
use a packaging system that tracks what files were installed by a
previous glibc package (via installing in an intermediate directory
with install_root). I think it's been long enough since 2.0 that it's
not particularly useful to have that special logic for those old
headers either; this patch removes it.
Tested for x86_64 and x86 (testsuite, and that installed shared
libraries are unchanged by the patch).
* configure.ac (old_glibc_headers): Remove configure test.
* configure: Regenerated.
* config.make.in (old-glibc-headers): Remove variable.
* Makefile [!$(install_root) && $(old-glibc-headers) = yes]
(install): Remove dependency on remove-old-headers.
(headers2_0): Remove variable.
(remove-old-headers): Remove rule.
There is a configure test for assembler support for the .text
directive.
I suppose this test must have been aimed at some non-ELF platform or
non-GNU assembler. Certainly the GNU assembler has had ELF-specific
architecture-independent handling for .text since version 2.2, and
generic non-ELF-specific support predates that.
This patch removes this test as obsolete.
Tested for x86_64 and x86 (testsuite, and that installed shared
libraries are unchanged by the patch).
* configure.ac (libc_cv_dot_text): Remove configure test.
(libc_cv_asm_set_directive): Use .text instead of
${libc_cv_dot_text} in configure test.
* configure: Regenerated.
libm-test.inc has special-case code treating errors of up to 0.5 ulp
as allowed (for functions that aren't exactly determined) even if no
such errors appeared in libm-test-ulps. This only applies to avoid
errors for individual function calls, not for the overall check of
ulps at the end of testing a function, resulting in confusing output
of the form:
testing double (without inline functions)
Maximal error of `log_upward'
is : 1 ulp
accepted: 0 ulp
with no report of what testcase produced that error. This patch
removes the special case, so that instead you get:
testing double (without inline functions)
Failure: Test: log_upward (0x1.0000000000001p+0)
Result:
is: 2.2204460492503129e-16 0x1.fffffffffffffp-53
should be: 2.2204460492503131e-16 0x1.0000000000000p-52
difference: 2.4651903288156619e-32 0x1.0000000000000p-105
ulp : 0.5000
max.ulp : 0.0000
Maximal error of `log_upward'
is : 1 ulp
accepted: 0 ulp
(for formats other than ldbl-128ibm, 0.5 ulp errors only occur in
unusual cases such as this where the correctly rounded result is a
power of 2 and the computed result is just below it). This should not
affect which cases result in the test failing, just ensure that if it
fails then some failure for an individual function call was reported.
Tested for x86_64 and x86.
* math/libm-test.inc (check_float_internal): Do not special-case
errors up to 0.5 ulp.
j1 and jn can underflow for small arguments, but fail to set errno
when underflowing to 0. This patch fixes them to set errno in that
case.
Tested for x86_64, x86, mips64 and powerpc.
[BZ #18611]
* sysdeps/ieee754/dbl-64/e_j1.c (__ieee754_j1): Set errno and
avoid excess range and precision on underflow.
* sysdeps/ieee754/dbl-64/e_jn.c (__ieee754_jn): Likewise.
* sysdeps/ieee754/flt-32/e_j1f.c (__ieee754_j1f): Likewise.
* sysdeps/ieee754/flt-32/e_jnf.c (__ieee754_jnf): Likewise.
* sysdeps/ieee754/ldbl-128/e_j1l.c (__ieee754_j1l): Set errno on
underflow.
* sysdeps/ieee754/ldbl-128/e_jnl.c (__ieee754_jnl): Likewise.
* sysdeps/ieee754/ldbl-128ibm/e_jnl.c (__ieee754_jnl): Likewise.
* sysdeps/ieee754/ldbl-96/e_j1l.c (__ieee754_j1l): Likewise.
* sysdeps/ieee754/ldbl-96/e_jnl.c (__ieee754_jnl): Likewise.
* math/auto-libm-test-in: Do not allow missing errno setting for
tests of j1 and jn.
* math/auto-libm-test-out: Regenerated.
The implementations of nearbyint functions using x87 floating point
(i386 all versions, x86_64 long double only) use the fclex
instruction, which clears any exceptions that were raised before the
function was called. These functions must not clear exceptions that
were raised before they were called.
This patch fixes these functions to save and restore the whole
floating-point environment (fnstenv / fldenv) as the way of avoiding
raising "inexact" (recall that there isn't an x87 instruction for
loading just the status word, so the whole environment has to be saved
and loaded instead - the code already saved and loaded the control
word, which is now obtained from the saved environment after this
patch, to disable traps on "inexact"). In the case of the long double
functions, any "invalid" exception from frndint (applied to a
signaling NaN) needs merging into the saved state; this issue doesn't
apply to the float and double functions because that exception would
have been raised when the argument is loaded, before the environment
is saved.
[BZ #15491]
* sysdeps/i386/fpu/s_nearbyint.S (__nearbyint): Save and restore
floating-point environment instead of clearing all exceptions.
* sysdeps/i386/fpu/s_nearbyintf.S (__nearbyintf): Likewise.
* sysdeps/i386/fpu/s_nearbyintl.S (__nearbyintl): Likewise,
merging in "invalid" exceptions from frndint.
* sysdeps/x86_64/fpu/s_nearbyintl.S (__nearbyintl): Likewise.
* math/test-nearbyint-except.c: New file.
* math/Makefile (tests): Add test-nearbyint-except.
Wilco fixed this tilegx bug in commit fe8c2b33ae ("Since we
now inline isinf, isnan and isfinite in math.h, replace uses
of __isinf_ns(l/f) with isinf, and remove the unused inlines
__isinf_ns(l/f), __isnan(f) and __finite(f).")
I verified that reverting math/s_cprojf.c back to using the
sysdeps/ieee754/flt-32/math_private.h version of __isinf_nsf()
instead of isinf() brings back the bug on tilegx.
Since GLIBC requires a minimum 2.6.32 kernel, the patch cleanups
the mips code to assume __NR_sync_file_range and the powerpc one
to either assume __NR_sync_file_range2 or __NR_sync_file_range.
Checked on powerpc64le and build for mips (ABIO32, ABIN32, and ABI64).
* sysdeps/unix/sysv/linux/powerpc/powerpc64/sync_file_range.c
(__NR_sync_file_range2): Assume it is always defined.
* sysdeps/unix/sysv/linux/mips/mips32/sync_file_range.c
(__NR_sync_file_range): Assume it is always defined.
This patch makes the io/tst-fcntl test create its temporary file in
do_prepare not do_test, so that add_temp_name is called in the parent
on the correct file name, as requested in the thread starting at
<https://sourceware.org/ml/libc-alpha/2015-10/msg00552.html>. I don't
see any reason in this test that opening the file in the parent should
be problematic.
This patch is explicitly not exhaustive for such issues; other tests
still call add_temp_file in the child. The general issue is noted at
<https://sourceware.org/glibc/wiki/Development_Todo/Master#Use_test-skeleton.c>.
Tested for x86_64 (that this test still passes and no longer leaves a
file behind in /tmp).
* io/tst-fcntl.c (fd): New static variable.
(do_prepare): Open temporary file here....
(do_test): ...not here.
The test io/ftwtest-sh creates a directory that at some points during
the test does not have execute permission. To avoid leaving behind
such a directory that prevents the build directory from being removed
with a simple "rm -rf", it traps various signals to make the directory
executable and remove it before exit. However, this doesn't cover the
case where one of the tests simply fails (which happens with cross
testing if testing on a remote system where the path to the build
directory involves a symlink, or if that remote system fell over
during testing - I think the latter is the case where the directory is
left behind with bad permissions).
This patch makes that test also trap signal 0 (exit) so that the
directory gets properly removed in such failure cases as well.
Tested in both configurations where the test passes and where it fails
to verify that the result of the test is unchanged but the directory
is no longer left behind where it was previously left behind.
* io/ftwtest-sh: Also trap on exit to remove temporary files.
Need to provide i386 __libc_do_syscall when PROF is defined.
Define OPTIMIZE_FOR_GCC_5 for .S files so that it can be used
in libc-do-syscall.S.
* sysdeps/unix/sysv/linux/i386/libc-do-syscall.S: Replace
__GNUC_PREREQ (5,0) with OPTIMIZE_FOR_GCC_5.
* sysdeps/unix/sysv/linux/i386/sysdep.h (OPTIMIZE_FOR_GCC_5):
Moved before "#ifdef __ASSEMBLER__".
My recent addition of more tests for j0 showed up that the ldbl-128
implementation of j0l produces spurious underflow exceptions for
arguments close to 0 (when the result is very close to 1). This patch
fixes this by just returning the argument in that case.
Tested for mips64 (where it fixes the recently-added tests that were
previously failing).
[BZ #19156]
* sysdeps/ieee754/ldbl-128/e_j0l.c (__ieee754_j0l): Return 1 for
arguments very close to 0.
PSEUDO_END and PSEUDO_END_NOERRNO are being defined in
sysdeps/unix/sysdep.h and then redefined for tile. Add an
undef before each define to silence the warnings.
Since asm ("ebp") can't be used to put the 6th argument in %ebp for
syscall when compiling for profiling, we disable GCC 5 optimization
when PROF is defined.
* sysdeps/unix/sysv/linux/i386/sysdep.h (OPTIMIZE_FOR_GCC_5):
New. Defined for GCC 5 and above when not compiling for
profiling.
Replace __GNUC_PREREQ (5,0) with OPTIMIZE_FOR_GCC_5.
Since -fomit-frame-pointer is compatible with -pg, apply it only to
.o/.os files.
* sysdeps/unix/sysv/linux/i386/Makefile (CFLAGS-epoll_pwait.c):
Renamed to ...
(CFLAGS-epoll_pwait.o): This.
(CFLAGS-mmap.c): Renamed to ...
(CFLAGS-mmap.o): This.
(CFLAGS-mmap64.c): Renamed to ...
(CFLAGS-mmap64.o): This.
(CFLAGS-epoll_pwait.os): New.
(CFLAGS-mmap.os): Likewise.
(CFLAGS-mmap64.os): Likewise.
(CFLAGS-semtimedop.os): Likewise.
(CFLAGS-semtimedop.c): Renamed to ...
(CFLAGS-semtimedop.o): This.
Modify a warning message so that it doesn't sound as an error, e.g.:
"Obtained backtrace with 6 functions (but wanted at least 6)"
Update a comment too.
This patch makes glibc build with -Wold-style-definition to avoid
old-style function definitions creeping back in by accident.
Tested for x86_64 and x86 (testsuite, and that installed shared
libraries are unchanged by the patch). Also tested build for arm,
mips64 and powerpc32. Hopefully there aren't any remaining
system-specific files with old-style definitions whose formatting
evaded my searches, but if there are, they will be easy to fix.
* Makeconfig (+gccwarn-c): Add -Wold-style-definition.
* Makefile ($(objpfx)c++-types-check.out): Filter out
$(+gccwarn-c) instead of -Wstrict-prototypes.
This patch converts a few more function definitions in glibc from
old-style K&R to prototype style. This is sufficient to build and
test on x86_64 and x86 with -Wold-style-definition (I'll test on some
more architectures before proposing the actual addition of
-Wold-style-definition).
Tested for x86_64 and x86 with -Wold-style-definition in use
(testsuite - this patch affects files containing assertions).
* io/fts.c (fts_open): Convert to prototype-style function
definition.
* malloc/mcheck.c (mcheck): Likewise.
(mcheck_pedantic): Likewise.
* posix/regexec.c (re_search_2_stub): Likewise. Use
internal_function.
(re_search_internal): Likewise.
* resolv/res_init.c [RESOLVSORT] (net_mask): Convert to
prototype-style function definition.
* sunrpc/clnt_udp.c (clntudp_call): Likewise.
* sunrpc/pmap_rmt.c (clnt_broadcast): Likewise.
* sunrpc/rpcsvc/rusers.x (xdr_utmp): Likewise.
(xdr_utmpptr): Likewise.
(xdr_utmparr): Likewise.
(xdr_utmpidle): Likewise.
(xdr_utmpidleptr): Likewise.
(xdr_utmpidlearr): Likewise.
This patch improves the libm test coverage for a few more functions.
Tested for x86_64 and x86.
2015-10-21 Joseph Myers <joseph@codesourcery.com>
* math/auto-libm-test-in: Add more tests of hypot, j0, j1, jn,
log, log10 and log2.
* math/auto-libm-test-out: Regenerated.
* math/libm-test.inc (fmod_test_data): Add more tests.
(fpclassify_test_data): Likewise.
(frexp_test_data): Likewise.
(hypot_test_data): Likewise.
(ilogb_test_data): Likewise.
This mostly automatically-generated patch converts 113 function
definitions in glibc from old-style K&R to prototype-style. Following
my other recent such patches, this one deals with the case of function
definitions in files that either contain assertions or where grep
suggested they might contain assertions - and thus where it isn't
possible to use a simple object code comparison as a sanity check on
the correctness of the patch, because line numbers are changed.
A few such automatically-generated changes needed to be supplemented
by manual changes for the result to compile. openat64 had a prototype
declaration with "..." but an old-style definition in
sysdeps/unix/sysv/linux/dl-openat64.c, and "..." needed adding to the
generated prototype in the definition (I've filed
<https://gcc.gnu.org/bugzilla/show_bug.cgi?id=68024> for diagnosing
such cases in GCC; the old state was undefined behavior not requiring
a diagnostic, but one seems a good idea). In addition, as Florian has
noted regparm attribute mismatches between declaration and definition
are only diagnosed for prototype definitions, and five functions
needed internal_function added to their definitions (in the case of
__pthread_mutex_cond_lock, via the macro definition of
__pthread_mutex_lock) to compile on i386.
After this patch is in, remaining old-style definitions are probably
most readily fixed manually before we can turn on
-Wold-style-definition for all builds.
Tested for x86_64 and x86 (testsuite).
* crypt/md5-crypt.c (__md5_crypt_r): Convert to prototype-style
function definition.
* crypt/sha256-crypt.c (__sha256_crypt_r): Likewise.
* crypt/sha512-crypt.c (__sha512_crypt_r): Likewise.
* debug/backtracesyms.c (__backtrace_symbols): Likewise.
* elf/dl-minimal.c (_itoa): Likewise.
* hurd/hurdmalloc.c (malloc): Likewise.
(free): Likewise.
(realloc): Likewise.
* inet/inet6_option.c (inet6_option_space): Likewise.
(inet6_option_init): Likewise.
(inet6_option_append): Likewise.
(inet6_option_alloc): Likewise.
(inet6_option_next): Likewise.
(inet6_option_find): Likewise.
* io/ftw.c (FTW_NAME): Likewise.
(NFTW_NAME): Likewise.
(NFTW_NEW_NAME): Likewise.
(NFTW_OLD_NAME): Likewise.
* libio/iofwide.c (_IO_fwide): Likewise.
* libio/strops.c (_IO_str_init_static_internal): Likewise.
(_IO_str_init_static): Likewise.
(_IO_str_init_readonly): Likewise.
(_IO_str_overflow): Likewise.
(_IO_str_underflow): Likewise.
(_IO_str_count): Likewise.
(_IO_str_seekoff): Likewise.
(_IO_str_pbackfail): Likewise.
(_IO_str_finish): Likewise.
* libio/wstrops.c (_IO_wstr_init_static): Likewise.
(_IO_wstr_overflow): Likewise.
(_IO_wstr_underflow): Likewise.
(_IO_wstr_count): Likewise.
(_IO_wstr_seekoff): Likewise.
(_IO_wstr_pbackfail): Likewise.
(_IO_wstr_finish): Likewise.
* locale/programs/localedef.c (normalize_codeset): Likewise.
* locale/programs/locarchive.c (add_locale_to_archive): Likewise.
(add_locales_to_archive): Likewise.
(delete_locales_from_archive): Likewise.
* malloc/malloc.c (__libc_mallinfo): Likewise.
* math/gen-auto-libm-tests.c (init_fp_formats): Likewise.
* misc/tsearch.c (__tfind): Likewise.
* nptl/pthread_attr_destroy.c (__pthread_attr_destroy): Likewise.
* nptl/pthread_attr_getdetachstate.c
(__pthread_attr_getdetachstate): Likewise.
* nptl/pthread_attr_getguardsize.c (pthread_attr_getguardsize):
Likewise.
* nptl/pthread_attr_getinheritsched.c
(__pthread_attr_getinheritsched): Likewise.
* nptl/pthread_attr_getschedparam.c
(__pthread_attr_getschedparam): Likewise.
* nptl/pthread_attr_getschedpolicy.c
(__pthread_attr_getschedpolicy): Likewise.
* nptl/pthread_attr_getscope.c (__pthread_attr_getscope):
Likewise.
* nptl/pthread_attr_getstack.c (__pthread_attr_getstack):
Likewise.
* nptl/pthread_attr_getstackaddr.c (__pthread_attr_getstackaddr):
Likewise.
* nptl/pthread_attr_getstacksize.c (__pthread_attr_getstacksize):
Likewise.
* nptl/pthread_attr_init.c (__pthread_attr_init_2_1): Likewise.
(__pthread_attr_init_2_0): Likewise.
* nptl/pthread_attr_setdetachstate.c
(__pthread_attr_setdetachstate): Likewise.
* nptl/pthread_attr_setguardsize.c (pthread_attr_setguardsize):
Likewise.
* nptl/pthread_attr_setinheritsched.c
(__pthread_attr_setinheritsched): Likewise.
* nptl/pthread_attr_setschedparam.c
(__pthread_attr_setschedparam): Likewise.
* nptl/pthread_attr_setschedpolicy.c
(__pthread_attr_setschedpolicy): Likewise.
* nptl/pthread_attr_setscope.c (__pthread_attr_setscope):
Likewise.
* nptl/pthread_attr_setstack.c (__pthread_attr_setstack):
Likewise.
* nptl/pthread_attr_setstackaddr.c (__pthread_attr_setstackaddr):
Likewise.
* nptl/pthread_attr_setstacksize.c (__pthread_attr_setstacksize):
Likewise.
* nptl/pthread_condattr_setclock.c (pthread_condattr_setclock):
Likewise.
* nptl/pthread_create.c (__find_in_stack_list): Likewise.
* nptl/pthread_getattr_np.c (pthread_getattr_np): Likewise.
* nptl/pthread_mutex_cond_lock.c (__pthread_mutex_lock): Define to
use internal_function.
* nptl/pthread_mutex_init.c (__pthread_mutex_init): Convert to
prototype-style function definition.
* nptl/pthread_mutex_lock.c (__pthread_mutex_lock): Likewise.
(__pthread_mutex_cond_lock_adjust): Likewise. Use
internal_function.
* nptl/pthread_mutex_timedlock.c (pthread_mutex_timedlock):
Convert to prototype-style function definition.
* nptl/pthread_mutex_trylock.c (__pthread_mutex_trylock):
Likewise.
* nptl/pthread_mutex_unlock.c (__pthread_mutex_unlock_usercnt):
Likewise.
(__pthread_mutex_unlock): Likewise.
* nptl_db/td_ta_clear_event.c (td_ta_clear_event): Likewise.
* nptl_db/td_ta_set_event.c (td_ta_set_event): Likewise.
* nptl_db/td_thr_clear_event.c (td_thr_clear_event): Likewise.
* nptl_db/td_thr_event_enable.c (td_thr_event_enable): Likewise.
* nptl_db/td_thr_set_event.c (td_thr_set_event): Likewise.
* nss/makedb.c (process_input): Likewise.
* posix/fnmatch.c (__strchrnul): Likewise.
(__wcschrnul): Likewise.
(fnmatch): Likewise.
* posix/fnmatch_loop.c (FCT): Likewise.
* posix/glob.c (globfree): Likewise.
(__glob_pattern_type): Likewise.
(__glob_pattern_p): Likewise.
* posix/regcomp.c (re_compile_pattern): Likewise.
(re_set_syntax): Likewise.
(re_compile_fastmap): Likewise.
(regcomp): Likewise.
(regerror): Likewise.
(regfree): Likewise.
* posix/regexec.c (regexec): Likewise.
(re_match): Likewise.
(re_search): Likewise.
(re_match_2): Likewise.
(re_search_2): Likewise.
(re_search_stub): Likewise. Use internal_function
(re_copy_regs): Likewise.
(re_set_registers): Convert to prototype-style function
definition.
(prune_impossible_nodes): Likewise. Use internal_function.
* resolv/inet_net_pton.c (inet_net_pton): Convert to
prototype-style function definition.
(inet_net_pton_ipv4): Likewise.
* stdlib/strtod_l.c (____STRTOF_INTERNAL): Likewise.
* sysdeps/pthread/aio_cancel.c (aio_cancel): Likewise.
* sysdeps/pthread/aio_suspend.c (aio_suspend): Likewise.
* sysdeps/pthread/timer_delete.c (timer_delete): Likewise.
* sysdeps/unix/sysv/linux/dl-openat64.c (openat64): Likewise.
Make variadic.
* time/strptime_l.c (localtime_r): Convert to prototype-style
function definition.
* wcsmbs/mbsnrtowcs.c (__mbsnrtowcs): Likewise.
* wcsmbs/mbsrtowcs_l.c (__mbsrtowcs_l): Likewise.
* wcsmbs/wcsnrtombs.c (__wcsnrtombs): Likewise.
* wcsmbs/wcsrtombs.c (__wcsrtombs): Likewise.
This automatically-generated patch converts 29 function definitions in
glibc (including one in an example in the manual) from old-style K&R
to prototype-style. Following my other recent such patches, this one
deals with the case of function definitions where one K&R parameter
declaration declares multiple parameters, as in:
void
foo (a, b)
int a, *b;
{
}
Tested for x86_64 and x86 (testsuite, and that installed stripped
shared libraries are unchanged by the patch).
* crypt/crypt.c (_ufc_doit_r): Convert to prototype-style function
definition.
(_ufc_doit_r): Likewise.
* crypt/crypt_util.c (_ufc_copymem): Likewise.
(_ufc_output_conversion_r): Likewise.
* inet/inet_mkadr.c (__inet_makeaddr): Likewise.
* inet/rcmd.c (rcmd_af): Likewise.
(rcmd): Likewise.
(ruserok_af): Likewise.
(ruserok): Likewise.
(ruserok2_sa): Likewise.
(ruserok_sa): Likewise.
(iruserok_af): Likewise.
(iruserok): Likewise.
(__ivaliduser): Likewise.
(__validuser2_sa): Likewise.
* inet/rexec.c (rexec_af): Likewise.
(rexec): Likewise.
* inet/ruserpass.c (ruserpass): Likewise.
* locale/programs/xmalloc.c (xcalloc): Likewise.
* manual/examples/timeval_subtract.c (timeval_subtract): Likewise.
* math/w_drem.c (__drem): Likewise.
* math/w_dremf.c (__dremf): Likewise.
* math/w_dreml.c (__dreml): Likewise.
* misc/daemon.c (daemon): Likewise.
* resolv/res_debug.c (p_fqnname): Likewise.
* stdlib/div.c (div): Likewise.
* string/memcmp.c (memcmp_bytes): Likewise.
* sunrpc/pmap_rmt.c (pmap_rmtcall): Likewise.
* sunrpc/svc_udp.c (svcudp_bufcreate): Likewise.
There is a configure test for assembler support for the
gnu_unique_object symbol type. This support was added in binutils
2.20, so is present in all versions supported for building glibc.
Thus, I think the configure test can be removed; this patch does so.
Now, there is a caveat that the gas NEWS entry refers to this as a
feature for GNU/Linux targets. But the condition is use of
ELFOSABI_GNU or ELFOSABI_NONE. ELFOSABI_GNU covers Hurd as well as
GNU/Linux (as was the case with the older ELFOSABI_LINUX name), and
ELFOSABI_NONE means this is effectively OS-independent. Furthermore,
I think a correct binutils port for any glibc target ought to support
this feature for use with glibc; glibc supports this as an
OS-independent feature (the configure test is only about glibc
testcases).
Tested for x86_64 (testsuite, and that installed shared libraries are
unchanged by the patch).
* configure.ac (libc_cv_asm_unique_object): Remove configure test.
* configure: Regenerated.
* config.h.in (HAVE_ASM_UNIQUE_OBJECT): Remove #undef.
* elf/tst-unique1.c (do_test) [HAVE_ASM_UNIQUE_OBJECT]: Make code
unconditional.
* elf/tst-unique1mod1.c [HAVE_ASM_UNIQUE_OBJECT]: Likewise.
* elf/tst-unique1mod2.c [HAVE_ASM_UNIQUE_OBJECT]: Likewise.
* elf/tst-unique2.c (do_test) [HAVE_ASM_UNIQUE_OBJECT]: Likewise.
(do_test) [!HAVE_ASM_UNIQUE_OBJECT]: Remove conditional code.
* elf/tst-unique2mod1.c [HAVE_ASM_UNIQUE_OBJECT]: Make code
unconditional.
* elf/tst-unique2mod2.c [HAVE_ASM_UNIQUE_OBJECT]: Likewise.
Two glibc makefiles use -Wno-strict-prototypes. I don't know if this
was needed before my recent conversion of many function definitions to
prototype style, but it's not needed now; this patch removes it.
Tested for x86_64 and x86 (testsuite, and that installed stripped
shared libraries are unchanged by the patch).
* posix/Makefile (CFLAGS-regex.c): Remove variable.
* resolv/Makefile (+cflags): Do not use -Wno-strict-prototypes.
With gcc-4.9, a new -fstack-protector-strong flag is available that is
between -fstack-protector (pretty weak) and -fstack-protector-all (pretty
strong) that provides good trade-offs between overhead but still providing
good coverage. Update the places in glibc that use ssp to use this flag
when it's available.
This also kills off the indirection of hardcoding the flag name in the
Makefiles and adding it based on a have-ssp boolean. Instead, the build
always expands the $(stack-protector) variable to the best ssp setting.
This makes the build logic a bit simpler and allows people to easily set
to a diff flag like:
make stack-protector=-fstack-protector-all
Since ld.so internel __fxstatat64 is only used internally in ld.so, it
can be made hidden.
[BZ #19122]
* include/sys/stat.h [IS_IN (rtld)] (__fxstatat64): Add
attribute_hidden.
The previous code used to evaluate the preprocessor token is_lock_free to
a variable before starting a transaction. This behavior can cause an
error if another thread got the lock (without using a transaction)
between the evaluation of the token and the beginning of the transaction.
This bug can be triggered with the following order of events:
1. The lock accessed by is_lock_free is free.
2. Thread T1 evaluates is_lock_free and stores into register R1 that the
lock is free.
3. Thread T2 acquires the same lock used in is_lock_free.
4. T1 begins the transaction, creating a memory barrier where is_lock_free
is false, but R1 is true.
5. T1 reads R1 and doesn't abort the transaction.
6. T1 calls ELIDE_UNLOCK, which reads false from is_lock_free and decides
to unlock a lock acquired by T2, leading to undefined behavior.
This patch delays the evaluation of is_lock_free to inside a transaction
by moving this part of the code to the macro ELIDE_LOCK.
[BZ #18743]
* sysdeps/powerpc/nptl/elide.h (__elide_lock): Move most of this
code to...
(ELIDE_LOCK): ...here.
(__get_new_count): New function with part of the code from
__elide_lock that updates the value of adapt_count after a
transaction abort.
(__elided_trylock): Moved this code to...
(ELIDE_TRYLOCK): ...here.
If grantpt() is called from a thread that is masking signals (for
instance, from a program using signalfd or using a dedicated
signal-handling thread), then that mask will get inherited to pt_chown.
This means that signals like SIGINT will not interrup pt_chown, so if it
hangs (e.g., because getgrnam("tty") hangs on a remote name service),
Ctrl-C will terminate the parent process but leave pt_chown around. Since
it's setuid, it's hard to kill any other way.
It is safe for pt_chown to unmask all signals, because grantpt() can be
(and usually is) called from an unprivileged process with all signals
unmasked.
There is a configure test for -fgnu89-inline. This option was added
in GCC 4.2, so the test is obsolete; this patch removes it.
Tested for x86_64 (testsuite, and that installed shared libraries are
unchanged by the patch).
* configure.ac (libc_cv_gnu89_inline): Remove configure test.
* configure: Regenerated.
* config.make.in (gnu89-inline-CFLAGS): Remove variable.
* Makeconfig (CFLAGS): Use -fgnu89-inline instead of
$(gnu89-inline-CFLAGS).
There are configure tests for assembler .weak support, and, as a
fallback, for .weakext support.
.weakext appears to be an ECOFF thing (although a few ELF targets
support it as well). .weak has been supported by the GNU assembler
for ELF targets since version 2.2, so given the requirement for ELF
the configure tests are obsolete; this patch removes them.
Tested for x86_64 (testsuite, and that installed shared libraries are
unchanged by the patch).
* configure.ac (libc_cv_asm_weak_directive): Remove configure
test.
(libc_cv_asm_weakext_directive): Likewise.
* configure: Regenerated.
* config.h.in (HAVE_ASM_WEAK_DIRECTIVE): Remove #undef.
(HAVE_ASM_WEAKEXT_DIRECTIVE): Likewise.
* include/libc-symbols.h
[!HAVE_ASM_WEAK_DIRECTIVE && !HAVE_ASM_WEAKEXT_DIRECTIVE]: Remove
#error.
[HAVE_ASM_WEAKEXT_DIRECTIVE]: Remove conditional code.
[!HAVE_ASM_WEAKEXT_DIRECTIVE]: Make code unconditional.
This patch improves the libm test coverage for a few more functions.
Tested for x86_64 and x86.
* math/libm-test.inc (fabs_test_data): Add more tests.
(fdim_test_data): Likewise.
(fma_test_data): Likewise.
(fmax_test_data): Likewise.
(fmin_test_data): Likewise.
(fmod_test_data): Likewise.
This patch adds more tests for ceil, floor, round and trunc, with a
particular focus on verifying they don't raise spurious "inexact"
exceptions for integer arguments (a C99 / C11 requirement, as opposed
to the general principle that they shouldn't raise "inexact" for any
arguments at all which is a TS 18661-1 requirement).
Tested for x86_64 and x86.
* math/libm-test.inc (ceil_test_data): Add more tests and more
expectations for "inexact".
(floor_test_data): Add more tests.
(round_test_data): Likewise.
(trunc_test_data): Likewise.
sysdeps/nptl/configure.ac has code to give errors if certain tests in
the top-level configure failed. However, all those failure conditions
also produce errors in the top-level configure, so the errors in the
NPTL configure are completely redundant; this patch removes them.
(As suggested in
<https://sourceware.org/ml/libc-alpha/2015-10/msg00510.html>, I think
the top-level tests in question can be completely removed as
unnecessary given the version tests. But even without that there is
clearly no point in duplicating code that gives an error if the test
fails.)
Tested for x86_64 (testsuite, and that installed shared libraries are
unchanged by the patch).
* sysdeps/nptl/configure.ac: Do not give errors based on the
results of top-level configure tests.
* sysdeps/nptl/configure: Regenerated.
There is a configure test for the -Bgroup linker option whose results
aren't used anywhere. This patch removes that test.
Tested for x86_64 (testsuite, and that installed shared libraries are
unchanged by the patch).
* configure.ac (libc_cv_Bgroup): Remove configure test.
* configure: Regenerated.
* config.make.in (have-Bgroup): Remove variable.
There is a configure test for sizeof (long double) whose results
aren't used anywhere. This patch removes that test.
Tested for x86_64 (testsuite, and that installed shared libraries are
unchanged by the patch).
* configure.ac (sizeof_long_double): Remove configure test.
* configure: Regenerated.
* config.make.in (sizeof-long-double): Remove variable.
I noticed that glibc testsuite runs left several files behind in /tmp
(or TMPDIR, if different). The problem was testcases that generate a
template for mkstemp / mkstemp64, ending with XXXXXX, then pass that
template to add_temp_file before calling mkstemp / mkstemp64, meaning
that the template ending with XXXXXX is stored in the list of
temporary files to delete (add_temp_file uses strdup so that the
original string doesn't need to stay live), not the actual filename as
determined by mkstemp / mkstemp64. This patch fixes those tests to
call add_temp_file later.
Tested for x86_64 (that the files are no longer left behind by a
testsuite run and the modified tests still pass).
* io/test-lfs.c (do_prepare): Do not call add_temp_file until
after mkstemp64.
* login/tst-utmp.c (do_prepare): Likewise.
* rt/tst-aio.c (do_prepare): Likewise.
* rt/tst-aio64.c (do_prepare): Likewise.
With TLE enabled, the adapt count variable update incurs
an 8% overhead before entering the critical section of an
elided mutex.
Instead, if it is done right after leaving the critical
section, this serialization can be avoided.
This alters the existing behavior of __lll_trylock_elision
as it will only decrement the adapt_count if it successfully
acquires the lock.
* sysdeps/unix/sysv/linux/powerpc/elision-lock.c
(__lll_lock_elision): Remove adapt_count decrement...
* sysdeps/unix/sysv/linux/powerpc/elision-trylock.c
(__lll_trylock_elision): Likewise.
* sysdeps/unix/sysv/linux/powerpc/elision-unlock.c
(__lll_unlock_elision): ... to here. And utilize
new adapt_count parameter.
* sysdeps/unix/sysv/linux/powerpc/lowlevellock.h
(__lll_unlock_elision): Update to include adapt_count
parameter.
(lll_unlock_elision): Pass pointer to adapt_count
variable.
Adding this parameter will give architectures more freedom in
how they choose to update this variable. This change has no
effect on architectures which choose not to use it.
* nptl/pthread_mutex_unlock.c(lll_unlock_elision):
Add elision adapt_count parameter to list of arguments.
* sysdeps/unix/sysv/linux/powerpc/lowlevellock.h
(lll_unlock_elision): Update with new parameter list
* sysdeps/unix/sysv/linux/s390/lowlevellock.h
(lll_unlock_elision): Likewise
* sysdeps/unix/sysv/linux/x86_64/lowlevellock.h
(lll_unlock_elision): Likewise
Since ld.so internel __uname is only used internally in ld.so, it can
be made hidden.
[BZ #19122]
* include/sys/utsname.h [IS_IN (rtld)] (__uname): Add
attribute_hidden.
Since ld.so internel stdlib functions are only used internally in
ld.so, they can be made hidden.
[BZ #19122]
* include/stdlib.h [IS_IN (rtld)] (unsetenv): Add
attribute_hidden.
[IS_IN (rtld)] (__strtoul_internal): Likewise.
Since ld.so internel sigaction functions are only used internally in
ld.so, they can be made hidden.
[BZ #19122]
* include/signal.h [IS_IN (rtld)] (__sigaction): Add
attribute_hidden.
[IS_IN (rtld)] (__libc_sigaction): Likewise.
Since internal dirent functions are only used internally in ld.so and
libc.so, they can be made hidden.
[BZ #19122]
* include/setjmp.h (__longjmp): Add attribute_hidden.
[IS_IN (rtld)] (__sigsetjmp): Likewise.
Since ld.so internel __profile_frequency is only used internally in
ld.so, it can be made hidden.
[BZ #19122]
* include/libc-internal.h [IS_IN (rtld)] (__profile_frequency):
Add attribute_hidden.
Since internal fcntl functions are only used internally in ld.so and
libc.so, they can be made hidden.
[BZ #19122]
* include/fcntl.h (__libc_fcntl): Add attribute_hidden.
[IS_IN (rtld)] (__open): Likewise.
[IS_IN (rtld)] (__fcntl): Likewise.
Since internal dirent functions are only used internally in ld.so and
libc.so, they can be made hidden.
[BZ #19122]
* include/dirent.h (__opendirat): Add attribute_hidden.
(__getdents): Likewise.
(__getdents64): Likewise.
(__alloc_dir): Likewise.
[IS_IN (rtld)] (__closedir): Likewise.
[IS_IN (rtld)] (__fdopendir): Likewise.
[IS_IN (rtld)] (__readdir): Likewise.
[IS_IN (rtld)] (__readdir64): Likewise.
[IS_IN (rtld)] (__rewinddir): Likewise.
Since _dl_catch_error is only used internally in ld.so, it should be
declared in sysdeps/generic/ldsodefs.h, not include/dlfcn.h and it can
be made hidden.
[BZ #19122]
* include/dlfcn.h (_dl_catch_error): Moved to ...
* sysdeps/generic/ldsodefs.h (_dl_catch_error): Add
attribute_hidden.
Since internal _itoa functions are only used internally in ld.so and
libc.so, they can be made hidden.
[BZ #19122]
* sysdeps/generic/_itoa.h (_itoa): Add attribute_hidden.
(_itoa_word): Likewise.
Since _wordcopy_XXX functions are only used internally in ld.so and
libc.so, they can be made hidden.
[BZ #19122]
* sysdeps/generic/memcopy.h (_wordcopy_fwd_aligned): Add
attribute_hidden.
(_wordcopy_fwd_dest_aligned): Likewise.
(_wordcopy_bwd_aligned): Likewise.
(_wordcopy_bwd_dest_aligned): Likewise.
Since x86 _dl_unmap and _dl_make_tlsdesc_dynamic are only used
internally in ld.so, they can be made hidden.
[BZ #19122]
* sysdeps/i386/dl-lookupcfg.h (_dl_unmap): Add attribute_hidden.
* sysdeps/i386/dl-tlsdesc.h (_dl_make_tlsdesc_dynamic):
Likewise.
* sysdeps/x86_64/dl-tlsdesc.h (_dl_make_tlsdesc_dynamic):
Likewise.
* sysdeps/x86_64/dl-lookupcfg.h (_dl_unmap): Likewise.
There is a configure test for assembler support for -mtune=i686. This
option was added in binutils 2.18 so the test is obsolete; this patch
removes it.
Tested for x86 (testsuite, and that installed shared libraries are
unchanged by the patch).
* sysdeps/i386/configure.ac (libc_cv_as_i686): Remove configure
test.
* sysdeps/i386/configure: Regenerated.
* sysdeps/i386/i686/Makefile [$(config-asflags-i686) = yes]: Make
code unconditional.
There is a configure test for the assembler .previous directive, and,
as a fallback, for .popsection.
glibc now only supports ELF. For ELF, the GNU assembler has supported
.previous since version 2.2 (support added by
Mon Jul 19 15:21:20 1993 Ken Raeburn (raeburn@rtl.cygnus.com)
* config/obj-elf.c (obj_elf_previous): New function.
(previous_section, previous_subsection): New vars.
(obj_elf_section): Save current place in case DWARF code wants us
to pop back to it. Handle unquoted section name as well as quoted
section name. Don't crash on invalid strings.
(obj_pseudo_table): Handle new pseudos "previous", "2byte", and
"4byte".
). Thus this configure test is obsolete, and this patch removes it
(and with it the fallback .popsection test).
Tested for x86_64 and x86 (testsuite, and that installed shared
libraries are unchanged by the patch).
* configure.ac (libc_cv_asm_previous_directive): Remove configure
test.
(libc_cv_asm_popsection_directive): Likewise.
* configure: Regenerated.
* config.h.in (HAVE_ASM_PREVIOUS_DIRECTIVE): Remove #undef.
(HAVE_ASM_POPSECTION_DIRECTIVE): Likewise.
* include/libc-symbols.h [HAVE_ASM_PREVIOUS_DIRECTIVE]
(__make_section_unallocated): Make definition unconditional.
[HAVE_ASM_POPSECTION_DIRECTIVE] (__make_section_unallocated):
Remove conditional definition.
[!HAVE_ASM_PREVIOUS_DIRECTIVE && !HAVE_ASM_POPSECTION_DIRECTIVE]
(__make_section_unallocated): Likewise.
There is a configure test for -static-libgcc. GCC added this option
in version 3.0, so this test is obsolete; this patch removes it.
Tested for x86_64 and x86 (testsuite, and that installed shared
libraries are unchanged by the patch).
* configure.ac (libc_cv_gcc_static_libgcc): Remove configure test.
* configure: Regenerated.
* config.make.in (static-libgcc): Remove variable.
* Makerules (build-shlib-helper): Use -static-libgcc instead of
$(static-libgcc).
(build-module-helper): Likewise.
There is a configure test "for libc-friendly stddef.h", which sets a
makefile variable stddef.h that appears to be nowhere used. It
appears the uses of this variable were removed by:
Tue Feb 21 00:10:50 1995 Roland McGrath <roland@churchy.gnu.ai.mit.edu>
* Makefile (headers): Remove $(stddef.h).
* Makeconfig (stddef.h): Variable removed; now require gcc version
>= 2.2.
* stddef.h: File removed.
(having been added by
Wed May 26 14:44:19 1993 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
* configure.in (autoconf checks): Add new check for a
libc-friendly stddef.h.
so the test was of use for less than two years, before being obsolete
for over 20 years). This patch removes the test.
Tested for x86_64 and x86 (testsuite, and that installed shared
libraries are unchanged by the patch).
* configure.ac (libc_cv_friendly_stddef): Remove configure test.
* configure: Regenerated.
Carlos O'Donell
Mike FABIAN
Joseph Myers
Aurelien Jarno
Siddhesh Poyarekar
Andrew Senkevich
Paul Eggert
Florian Weimer
Chris Metcalf
Carlos Eduardo Seo
Ludovic Courtès
Adhemerval Zanella
H.J. Lu
Szabolcs Nagy
Samuel Thibault
Thomas Schwinge
Maciej W. Rozycki
Gleb Fotengauer-Malinovskiy
Roland McGrath
Stefan Liebler
Paul Murphy
Siddhesh Poyarekar
Mike Frysinger
Adhemerval Zanella
Wilco Dijkstra
Mark Wielaard
David Kastrup
Andreas Schwab
Tulio Magno Quites Machado Filho
Geoffrey Thomas
Steve Ellcey