1998-04-21 18:00 Ulrich Drepper <drepper@cygnus.com>
* iconv/gconv.c (__gconv): Remove bogus input buffer size computation.
* iconv/gconv_open.c (__gconv_open): Initialize outbufend element.
* iconv/gconv_simple.c (__gconv_transform_internal_ascii): Don't use
character in comparison with uint32_t.
(__gconv_transform_internal_utf8): Specify MAX_NEEDED_TO.
(__gconv_transform_utf8_internal): Specify MAX_NEEDED_FROM.
Optimize BODY a bit.
* iconv/loop.c: Require MIN_NEEDED_INPUT and MIN_NEEDED_OUTPUT to
be defined.
* iconv/skeleton.c: Also reset converted counter in case of an error.
Call reset function using correct value for output buffer start.
* iconvdata/Makefile: Re-enable tests.
* iconvdata/iso8859-1.c: Swap MIN_NEEDED_INPUT and MIN_NEEDED_OUTPUT
value for to-conversion.
* iconvdata/TESTS: Add new third column.
* iconvdata/run-iconv-test.sh: Add support for charsets which are
not ASCII based.
* iconvdata/testdata/suntzus: New file.
* elf/dl-minimal.c (__strtol_internal): Increment pointer to string
while reading. Correctly used base. Little optimization.
(__strtoul_internal): Likewise.
* elf/rtld.c (dl_main): Test to avoid duplicate call of _dl_init_paths
was wrong. Use explicit variable.
1998-04-20 23:49 Zack Weinberg <zack@rabi.phys.columbia.edu>
* configure.in: Check for awk.
* config.make.in: Add AWK to be substituted.
* manual/xtract-typefun.awk: Rewrite to eliminate gawk extensions.
* manual/users.texi: Fix typo exposed by above rewrite.
* Makefile: Invoke awk using AWK variable.
* csu/Makefile: Likewise.
* elf/Makefile: Likewise.
* mach/Makefile: Likewise.
* manual/Makefile: Likewise.
* sysdeps/gnu/Makefile: Likewise.
* sysdeps/mach/hurd/Makefile: Likewise.
* sysdeps/unix/Makefile: Likewise.
* timezone/Makefile: Likewise.
1998-04-10 Gordon Matzigkeit <gord@profitpress.com>
* sysdeps/gnu/errlist.awk (ERR_REMAP): Implement error code to
array index translation.
(SYS_ERRLIST_ALIAS, SYS_NERR_ALIAS): Make weak aliases only if
these are defined.
* sysdeps/mach/hurd/Dist: Add errlist.c to distribution.
* sysdeps/mach/hurd/errlist.c: New file.
(ERR_TRANSLATE): Map Hurd error codes into errlist indices.
(_hurd_errlist): The Hurd error list doesn't have Unix sys_errlist
semantics, so rename it.
1998-04-16 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
* iconvdata/run-iconv-test.sh: Make portable. Always test all
conversions.
1998-04-21 12:30 H.J. Lu <hjl@gnu.org>
* wcsmbs/wcsrtombs.c (__wcsrtombs): Initialize result to 0.
* wcsmbs/wcsnrtombs.c: Likewise.
1998-04-21 Ulrich Drepper <drepper@cygnus.com>
* sysdeps/generic/dl-sysdep.c: Handle _dl_hwcap correctly.
* wcsmbs/btowc.c (__btowc): Declare inptr as const char *.
* time/strftime.c (my_strftime): Initialize pad variable in
declaration.
* iconvdata/big5.c: Don't use character constants in comparisons
with unsigned value.
* sysdeps/generic/setutxent.c: New file.
* sysdeps/generic/getutxent.c: New file.
* sysdeps/generic/endutxent.c: New file.
* sysdeps/generic/getutxid.c: New file.
* sysdeps/generic/getutxline.c: New file.
* sysdeps/generic/pututxline.c: New file.
* sysdeps/generic/utmpxname.c: New file.
* sysdeps/generic/updwtmpx.c: New file.
This directory contains the version 2.0.92 test release of the GNU C Library.
Many bugs have been fixed since the last release.
Some bugs surely remain.
As of this release, the GNU C library is known to run on the following
configurations:
*-*-gnu GNU Hurd
i[3456]86-*-linux-gnu Linux-2.x on Intel
m68k-*-linux-gnu Linux-2.x on Motorola 680x0
alpha-*-linux-gnu Linux-2.x on DEC Alpha
powerpc-*-linux-gnu Linux and MkLinux on PowerPC systems
sparc-*-linux-gnu Linux-2.x on SPARC
sparc64-*-linux-gnu Linux-2.x on UltraSPARC
Former releases of this library (version 1.09.1 and perhaps earlier
versions) used to run on the following configurations:
alpha-dec-osf1
i[3456]86-*-bsd4.3
i[3456]86-*-isc2.2
i[3456]86-*-isc3
i[3456]86-*-sco3.2
i[3456]86-*-sco3.2v4
i[3456]86-*-sysv
i[3456]86-*-sysv4
i[3456]86-force_cpu386-none
i[3456]86-sequent-bsd
i960-nindy960-none
m68k-hp-bsd4.3
m68k-mvme135-none
m68k-mvme136-none
m68k-sony-newsos3
m68k-sony-newsos4
m68k-sun-sunos4
mips-dec-ultrix4
mips-sgi-irix4
sparc-sun-solaris2
sparc-sun-sunos4
Since no one has volunteered to test and fix the above configurations,
these are not supported at the moment. It's expected that these don't
work anymore. Porting the library is not hard. If you are interested
in doing a port, please contact the glibc maintainers by sending
electronic mail to <bug-glibc@gnu.org>.
The GNU C library now includes Michael Glad's Ultra Fast Crypt, which
provides the Unix `crypt' function, plus some other entry points.
Because of the United States export restriction on DES implementations,
we are distributing this code separately from the rest of the C
library. There is an extra distribution tar file just for crypt; it is
called `glibc-crypt-2.0.92.tar.gz'. You can just unpack the crypt
distribution along with the rest of the C library and build; you can
also build the library without getting crypt. Users outside the USA
can get the crypt distribution via anonymous FTP from ftp.ifi.uio.no
[129.240.64.21], or another archive site outside the USA. Archive
maintainers are encouraged to copy this distribution to their archives
outside the USA. Please get it from ftp.ifi.uio.no; transferring this
distribution from ftp.gnu.org (or any other site in the USA) to a
site outside the USA is in violation of US export laws.
Beside the separate crypt tar file there are some more add-ons which can be
used together with GNU libc. They are designed in a way to ease the
installation by integrating them in the libc source tree. Simply get the
add-ons you need and use the --enable-add-ons option of the `configure'
script to tell where the add-ons are found. Please read the FAQ file for
more details.
See the file INSTALL to find out how to configure, build, install, and port
the GNU C library. You might also consider reading the WWW pages for the
GNU libc at http://www.gnu.org/software/libc/libc.html.
The GNU C Library is completely documented by the Texinfo manual found
in the `manual/' subdirectory. The manual is still being updated and
contains some known errors and omissions; we regret that we do not
have the resources to work on the manual as much as we would like.
Please send comments on the manual to <bug-glibc-manual@gnu.org>, and
not to the library bug-reporting address.
The file NOTES contains a description of the feature-test macros used
in the GNU C library, explaining how you can tell the library what
facilities you want it to make available.
We prefer to get bug reports sent using the `glibcbug' shell script which
is installed together with the rest of the GNU libc to <bugs@gnu.org>.
Simply run this shell script and fill in the information. Nevertheless
you can still send bug reports to <bug-glibc@gnu.org> as normal electronic
mails.
The GNU C Library is free software. See the file COPYING.LIB for copying
conditions.