507 lines
18 KiB
C
507 lines
18 KiB
C
/* SPDX-License-Identifier: GPL-2.0-only */
|
|
/*
|
|
* Copyright (c) 2009-2011 Wind River Systems, Inc.
|
|
* Copyright (c) 2011 ST Microelectronics (Alessandro Rubini)
|
|
*
|
|
* The STMicroelectronics ConneXt (STA2X11) chip has several unrelated
|
|
* functions in one PCI endpoint functions. This driver simply
|
|
* registers the platform devices in this iomemregion and exports a few
|
|
* functions to access common registers
|
|
*/
|
|
|
|
#ifndef __STA2X11_MFD_H
|
|
#define __STA2X11_MFD_H
|
|
#include <linux/types.h>
|
|
#include <linux/pci.h>
|
|
|
|
enum sta2x11_mfd_plat_dev {
|
|
sta2x11_sctl = 0,
|
|
sta2x11_gpio,
|
|
sta2x11_scr,
|
|
sta2x11_time,
|
|
sta2x11_apbreg,
|
|
sta2x11_apb_soc_regs,
|
|
sta2x11_vic,
|
|
sta2x11_n_mfd_plat_devs,
|
|
};
|
|
|
|
#define STA2X11_MFD_SCTL_NAME "sta2x11-sctl"
|
|
#define STA2X11_MFD_GPIO_NAME "sta2x11-gpio"
|
|
#define STA2X11_MFD_SCR_NAME "sta2x11-scr"
|
|
#define STA2X11_MFD_TIME_NAME "sta2x11-time"
|
|
#define STA2X11_MFD_APBREG_NAME "sta2x11-apbreg"
|
|
#define STA2X11_MFD_APB_SOC_REGS_NAME "sta2x11-apb-soc-regs"
|
|
#define STA2X11_MFD_VIC_NAME "sta2x11-vic"
|
|
|
|
extern u32
|
|
__sta2x11_mfd_mask(struct pci_dev *, u32, u32, u32, enum sta2x11_mfd_plat_dev);
|
|
|
|
/*
|
|
* The MFD PCI block includes the GPIO peripherals and other register blocks.
|
|
* For GPIO, we have 32*4 bits (I use "gsta" for "gpio sta2x11".)
|
|
*/
|
|
#define GSTA_GPIO_PER_BLOCK 32
|
|
#define GSTA_NR_BLOCKS 4
|
|
#define GSTA_NR_GPIO (GSTA_GPIO_PER_BLOCK * GSTA_NR_BLOCKS)
|
|
|
|
/* Pinconfig is set by the board definition: altfunc, pull-up, pull-down */
|
|
struct sta2x11_gpio_pdata {
|
|
unsigned pinconfig[GSTA_NR_GPIO];
|
|
};
|
|
|
|
/* Macros below lifted from sh_pfc.h, with minor differences */
|
|
#define PINMUX_TYPE_NONE 0
|
|
#define PINMUX_TYPE_FUNCTION 1
|
|
#define PINMUX_TYPE_OUTPUT_LOW 2
|
|
#define PINMUX_TYPE_OUTPUT_HIGH 3
|
|
#define PINMUX_TYPE_INPUT 4
|
|
#define PINMUX_TYPE_INPUT_PULLUP 5
|
|
#define PINMUX_TYPE_INPUT_PULLDOWN 6
|
|
|
|
/* Give names to GPIO pins, like PXA does, taken from the manual */
|
|
#define STA2X11_GPIO0 0
|
|
#define STA2X11_GPIO1 1
|
|
#define STA2X11_GPIO2 2
|
|
#define STA2X11_GPIO3 3
|
|
#define STA2X11_GPIO4 4
|
|
#define STA2X11_GPIO5 5
|
|
#define STA2X11_GPIO6 6
|
|
#define STA2X11_GPIO7 7
|
|
#define STA2X11_GPIO8_RGBOUT_RED7 8
|
|
#define STA2X11_GPIO9_RGBOUT_RED6 9
|
|
#define STA2X11_GPIO10_RGBOUT_RED5 10
|
|
#define STA2X11_GPIO11_RGBOUT_RED4 11
|
|
#define STA2X11_GPIO12_RGBOUT_RED3 12
|
|
#define STA2X11_GPIO13_RGBOUT_RED2 13
|
|
#define STA2X11_GPIO14_RGBOUT_RED1 14
|
|
#define STA2X11_GPIO15_RGBOUT_RED0 15
|
|
#define STA2X11_GPIO16_RGBOUT_GREEN7 16
|
|
#define STA2X11_GPIO17_RGBOUT_GREEN6 17
|
|
#define STA2X11_GPIO18_RGBOUT_GREEN5 18
|
|
#define STA2X11_GPIO19_RGBOUT_GREEN4 19
|
|
#define STA2X11_GPIO20_RGBOUT_GREEN3 20
|
|
#define STA2X11_GPIO21_RGBOUT_GREEN2 21
|
|
#define STA2X11_GPIO22_RGBOUT_GREEN1 22
|
|
#define STA2X11_GPIO23_RGBOUT_GREEN0 23
|
|
#define STA2X11_GPIO24_RGBOUT_BLUE7 24
|
|
#define STA2X11_GPIO25_RGBOUT_BLUE6 25
|
|
#define STA2X11_GPIO26_RGBOUT_BLUE5 26
|
|
#define STA2X11_GPIO27_RGBOUT_BLUE4 27
|
|
#define STA2X11_GPIO28_RGBOUT_BLUE3 28
|
|
#define STA2X11_GPIO29_RGBOUT_BLUE2 29
|
|
#define STA2X11_GPIO30_RGBOUT_BLUE1 30
|
|
#define STA2X11_GPIO31_RGBOUT_BLUE0 31
|
|
#define STA2X11_GPIO32_RGBOUT_VSYNCH 32
|
|
#define STA2X11_GPIO33_RGBOUT_HSYNCH 33
|
|
#define STA2X11_GPIO34_RGBOUT_DEN 34
|
|
#define STA2X11_GPIO35_ETH_CRS_DV 35
|
|
#define STA2X11_GPIO36_ETH_TXD1 36
|
|
#define STA2X11_GPIO37_ETH_TXD0 37
|
|
#define STA2X11_GPIO38_ETH_TX_EN 38
|
|
#define STA2X11_GPIO39_MDIO 39
|
|
#define STA2X11_GPIO40_ETH_REF_CLK 40
|
|
#define STA2X11_GPIO41_ETH_RXD1 41
|
|
#define STA2X11_GPIO42_ETH_RXD0 42
|
|
#define STA2X11_GPIO43_MDC 43
|
|
#define STA2X11_GPIO44_CAN_TX 44
|
|
#define STA2X11_GPIO45_CAN_RX 45
|
|
#define STA2X11_GPIO46_MLB_DAT 46
|
|
#define STA2X11_GPIO47_MLB_SIG 47
|
|
#define STA2X11_GPIO48_SPI0_CLK 48
|
|
#define STA2X11_GPIO49_SPI0_TXD 49
|
|
#define STA2X11_GPIO50_SPI0_RXD 50
|
|
#define STA2X11_GPIO51_SPI0_FRM 51
|
|
#define STA2X11_GPIO52_SPI1_CLK 52
|
|
#define STA2X11_GPIO53_SPI1_TXD 53
|
|
#define STA2X11_GPIO54_SPI1_RXD 54
|
|
#define STA2X11_GPIO55_SPI1_FRM 55
|
|
#define STA2X11_GPIO56_SPI2_CLK 56
|
|
#define STA2X11_GPIO57_SPI2_TXD 57
|
|
#define STA2X11_GPIO58_SPI2_RXD 58
|
|
#define STA2X11_GPIO59_SPI2_FRM 59
|
|
#define STA2X11_GPIO60_I2C0_SCL 60
|
|
#define STA2X11_GPIO61_I2C0_SDA 61
|
|
#define STA2X11_GPIO62_I2C1_SCL 62
|
|
#define STA2X11_GPIO63_I2C1_SDA 63
|
|
#define STA2X11_GPIO64_I2C2_SCL 64
|
|
#define STA2X11_GPIO65_I2C2_SDA 65
|
|
#define STA2X11_GPIO66_I2C3_SCL 66
|
|
#define STA2X11_GPIO67_I2C3_SDA 67
|
|
#define STA2X11_GPIO68_MSP0_RCK 68
|
|
#define STA2X11_GPIO69_MSP0_RXD 69
|
|
#define STA2X11_GPIO70_MSP0_RFS 70
|
|
#define STA2X11_GPIO71_MSP0_TCK 71
|
|
#define STA2X11_GPIO72_MSP0_TXD 72
|
|
#define STA2X11_GPIO73_MSP0_TFS 73
|
|
#define STA2X11_GPIO74_MSP0_SCK 74
|
|
#define STA2X11_GPIO75_MSP1_CK 75
|
|
#define STA2X11_GPIO76_MSP1_RXD 76
|
|
#define STA2X11_GPIO77_MSP1_FS 77
|
|
#define STA2X11_GPIO78_MSP1_TXD 78
|
|
#define STA2X11_GPIO79_MSP2_CK 79
|
|
#define STA2X11_GPIO80_MSP2_RXD 80
|
|
#define STA2X11_GPIO81_MSP2_FS 81
|
|
#define STA2X11_GPIO82_MSP2_TXD 82
|
|
#define STA2X11_GPIO83_MSP3_CK 83
|
|
#define STA2X11_GPIO84_MSP3_RXD 84
|
|
#define STA2X11_GPIO85_MSP3_FS 85
|
|
#define STA2X11_GPIO86_MSP3_TXD 86
|
|
#define STA2X11_GPIO87_MSP4_CK 87
|
|
#define STA2X11_GPIO88_MSP4_RXD 88
|
|
#define STA2X11_GPIO89_MSP4_FS 89
|
|
#define STA2X11_GPIO90_MSP4_TXD 90
|
|
#define STA2X11_GPIO91_MSP5_CK 91
|
|
#define STA2X11_GPIO92_MSP5_RXD 92
|
|
#define STA2X11_GPIO93_MSP5_FS 93
|
|
#define STA2X11_GPIO94_MSP5_TXD 94
|
|
#define STA2X11_GPIO95_SDIO3_DAT3 95
|
|
#define STA2X11_GPIO96_SDIO3_DAT2 96
|
|
#define STA2X11_GPIO97_SDIO3_DAT1 97
|
|
#define STA2X11_GPIO98_SDIO3_DAT0 98
|
|
#define STA2X11_GPIO99_SDIO3_CLK 99
|
|
#define STA2X11_GPIO100_SDIO3_CMD 100
|
|
#define STA2X11_GPIO101 101
|
|
#define STA2X11_GPIO102 102
|
|
#define STA2X11_GPIO103 103
|
|
#define STA2X11_GPIO104 104
|
|
#define STA2X11_GPIO105_SDIO2_DAT3 105
|
|
#define STA2X11_GPIO106_SDIO2_DAT2 106
|
|
#define STA2X11_GPIO107_SDIO2_DAT1 107
|
|
#define STA2X11_GPIO108_SDIO2_DAT0 108
|
|
#define STA2X11_GPIO109_SDIO2_CLK 109
|
|
#define STA2X11_GPIO110_SDIO2_CMD 110
|
|
#define STA2X11_GPIO111 111
|
|
#define STA2X11_GPIO112 112
|
|
#define STA2X11_GPIO113 113
|
|
#define STA2X11_GPIO114 114
|
|
#define STA2X11_GPIO115_SDIO1_DAT3 115
|
|
#define STA2X11_GPIO116_SDIO1_DAT2 116
|
|
#define STA2X11_GPIO117_SDIO1_DAT1 117
|
|
#define STA2X11_GPIO118_SDIO1_DAT0 118
|
|
#define STA2X11_GPIO119_SDIO1_CLK 119
|
|
#define STA2X11_GPIO120_SDIO1_CMD 120
|
|
#define STA2X11_GPIO121 121
|
|
#define STA2X11_GPIO122 122
|
|
#define STA2X11_GPIO123 123
|
|
#define STA2X11_GPIO124 124
|
|
#define STA2X11_GPIO125_UART2_TXD 125
|
|
#define STA2X11_GPIO126_UART2_RXD 126
|
|
#define STA2X11_GPIO127_UART3_TXD 127
|
|
|
|
/*
|
|
* The APB bridge has its own registers, needed by our users as well.
|
|
* They are accessed with the following read/mask/write function.
|
|
*/
|
|
static inline u32
|
|
sta2x11_apbreg_mask(struct pci_dev *pdev, u32 reg, u32 mask, u32 val)
|
|
{
|
|
return __sta2x11_mfd_mask(pdev, reg, mask, val, sta2x11_apbreg);
|
|
}
|
|
|
|
/* CAN and MLB */
|
|
#define APBREG_BSR 0x00 /* Bridge Status Reg */
|
|
#define APBREG_PAER 0x08 /* Peripherals Address Error Reg */
|
|
#define APBREG_PWAC 0x20 /* Peripheral Write Access Control reg */
|
|
#define APBREG_PRAC 0x40 /* Peripheral Read Access Control reg */
|
|
#define APBREG_PCG 0x60 /* Peripheral Clock Gating Reg */
|
|
#define APBREG_PUR 0x80 /* Peripheral Under Reset Reg */
|
|
#define APBREG_EMU_PCG 0xA0 /* Emulator Peripheral Clock Gating Reg */
|
|
|
|
#define APBREG_CAN (1 << 1)
|
|
#define APBREG_MLB (1 << 3)
|
|
|
|
/* SARAC */
|
|
#define APBREG_BSR_SARAC 0x100 /* Bridge Status Reg */
|
|
#define APBREG_PAER_SARAC 0x108 /* Peripherals Address Error Reg */
|
|
#define APBREG_PWAC_SARAC 0x120 /* Peripheral Write Access Control reg */
|
|
#define APBREG_PRAC_SARAC 0x140 /* Peripheral Read Access Control reg */
|
|
#define APBREG_PCG_SARAC 0x160 /* Peripheral Clock Gating Reg */
|
|
#define APBREG_PUR_SARAC 0x180 /* Peripheral Under Reset Reg */
|
|
#define APBREG_EMU_PCG_SARAC 0x1A0 /* Emulator Peripheral Clock Gating Reg */
|
|
|
|
#define APBREG_SARAC (1 << 2)
|
|
|
|
/*
|
|
* The system controller has its own registers. Some of these are accessed
|
|
* by out users as well, using the following read/mask/write/function
|
|
*/
|
|
static inline
|
|
u32 sta2x11_sctl_mask(struct pci_dev *pdev, u32 reg, u32 mask, u32 val)
|
|
{
|
|
return __sta2x11_mfd_mask(pdev, reg, mask, val, sta2x11_sctl);
|
|
}
|
|
|
|
#define SCTL_SCCTL 0x00 /* System controller control register */
|
|
#define SCTL_ARMCFG 0x04 /* ARM configuration register */
|
|
#define SCTL_SCPLLCTL 0x08 /* PLL control status register */
|
|
|
|
#define SCTL_SCPLLCTL_AUDIO_PLL_PD BIT(1)
|
|
#define SCTL_SCPLLCTL_FRAC_CONTROL BIT(3)
|
|
#define SCTL_SCPLLCTL_STRB_BYPASS BIT(6)
|
|
#define SCTL_SCPLLCTL_STRB_INPUT BIT(8)
|
|
|
|
#define SCTL_SCPLLFCTRL 0x0c /* PLL frequency control register */
|
|
|
|
#define SCTL_SCPLLFCTRL_AUDIO_PLL_NDIV_MASK 0xff
|
|
#define SCTL_SCPLLFCTRL_AUDIO_PLL_NDIV_SHIFT 10
|
|
#define SCTL_SCPLLFCTRL_AUDIO_PLL_IDF_MASK 7
|
|
#define SCTL_SCPLLFCTRL_AUDIO_PLL_IDF_SHIFT 21
|
|
#define SCTL_SCPLLFCTRL_AUDIO_PLL_ODF_MASK 7
|
|
#define SCTL_SCPLLFCTRL_AUDIO_PLL_ODF_SHIFT 18
|
|
#define SCTL_SCPLLFCTRL_DITHER_DISABLE_MASK 0x03
|
|
#define SCTL_SCPLLFCTRL_DITHER_DISABLE_SHIFT 4
|
|
|
|
|
|
#define SCTL_SCRESFRACT 0x10 /* PLL fractional input register */
|
|
|
|
#define SCTL_SCRESFRACT_MASK 0x0000ffff
|
|
|
|
|
|
#define SCTL_SCRESCTRL1 0x14 /* Peripheral reset control 1 */
|
|
#define SCTL_SCRESXTRL2 0x18 /* Peripheral reset control 2 */
|
|
#define SCTL_SCPEREN0 0x1c /* Peripheral clock enable register 0 */
|
|
#define SCTL_SCPEREN1 0x20 /* Peripheral clock enable register 1 */
|
|
#define SCTL_SCPEREN2 0x24 /* Peripheral clock enable register 2 */
|
|
#define SCTL_SCGRST 0x28 /* Peripheral global reset */
|
|
#define SCTL_SCPCIECSBRST 0x2c /* PCIe PAB CSB reset status register */
|
|
#define SCTL_SCPCIPMCR1 0x30 /* PCI power management control 1 */
|
|
#define SCTL_SCPCIPMCR2 0x34 /* PCI power management control 2 */
|
|
#define SCTL_SCPCIPMSR1 0x38 /* PCI power management status 1 */
|
|
#define SCTL_SCPCIPMSR2 0x3c /* PCI power management status 2 */
|
|
#define SCTL_SCPCIPMSR3 0x40 /* PCI power management status 3 */
|
|
#define SCTL_SCINTREN 0x44 /* Interrupt enable */
|
|
#define SCTL_SCRISR 0x48 /* RAW interrupt status */
|
|
#define SCTL_SCCLKSTAT0 0x4c /* Peripheral clocks status 0 */
|
|
#define SCTL_SCCLKSTAT1 0x50 /* Peripheral clocks status 1 */
|
|
#define SCTL_SCCLKSTAT2 0x54 /* Peripheral clocks status 2 */
|
|
#define SCTL_SCRSTSTA 0x58 /* Reset status register */
|
|
|
|
#define SCTL_SCRESCTRL1_USB_PHY_POR (1 << 0)
|
|
#define SCTL_SCRESCTRL1_USB_OTG (1 << 1)
|
|
#define SCTL_SCRESCTRL1_USB_HRST (1 << 2)
|
|
#define SCTL_SCRESCTRL1_USB_PHY_HOST (1 << 3)
|
|
#define SCTL_SCRESCTRL1_SATAII (1 << 4)
|
|
#define SCTL_SCRESCTRL1_VIP (1 << 5)
|
|
#define SCTL_SCRESCTRL1_PER_MMC0 (1 << 6)
|
|
#define SCTL_SCRESCTRL1_PER_MMC1 (1 << 7)
|
|
#define SCTL_SCRESCTRL1_PER_GPIO0 (1 << 8)
|
|
#define SCTL_SCRESCTRL1_PER_GPIO1 (1 << 9)
|
|
#define SCTL_SCRESCTRL1_PER_GPIO2 (1 << 10)
|
|
#define SCTL_SCRESCTRL1_PER_GPIO3 (1 << 11)
|
|
#define SCTL_SCRESCTRL1_PER_MTU0 (1 << 12)
|
|
#define SCTL_SCRESCTRL1_KER_SPI0 (1 << 13)
|
|
#define SCTL_SCRESCTRL1_KER_SPI1 (1 << 14)
|
|
#define SCTL_SCRESCTRL1_KER_SPI2 (1 << 15)
|
|
#define SCTL_SCRESCTRL1_KER_MCI0 (1 << 16)
|
|
#define SCTL_SCRESCTRL1_KER_MCI1 (1 << 17)
|
|
#define SCTL_SCRESCTRL1_PRE_HSI2C0 (1 << 18)
|
|
#define SCTL_SCRESCTRL1_PER_HSI2C1 (1 << 19)
|
|
#define SCTL_SCRESCTRL1_PER_HSI2C2 (1 << 20)
|
|
#define SCTL_SCRESCTRL1_PER_HSI2C3 (1 << 21)
|
|
#define SCTL_SCRESCTRL1_PER_MSP0 (1 << 22)
|
|
#define SCTL_SCRESCTRL1_PER_MSP1 (1 << 23)
|
|
#define SCTL_SCRESCTRL1_PER_MSP2 (1 << 24)
|
|
#define SCTL_SCRESCTRL1_PER_MSP3 (1 << 25)
|
|
#define SCTL_SCRESCTRL1_PER_MSP4 (1 << 26)
|
|
#define SCTL_SCRESCTRL1_PER_MSP5 (1 << 27)
|
|
#define SCTL_SCRESCTRL1_PER_MMC (1 << 28)
|
|
#define SCTL_SCRESCTRL1_KER_MSP0 (1 << 29)
|
|
#define SCTL_SCRESCTRL1_KER_MSP1 (1 << 30)
|
|
#define SCTL_SCRESCTRL1_KER_MSP2 (1 << 31)
|
|
|
|
#define SCTL_SCPEREN0_UART0 (1 << 0)
|
|
#define SCTL_SCPEREN0_UART1 (1 << 1)
|
|
#define SCTL_SCPEREN0_UART2 (1 << 2)
|
|
#define SCTL_SCPEREN0_UART3 (1 << 3)
|
|
#define SCTL_SCPEREN0_MSP0 (1 << 4)
|
|
#define SCTL_SCPEREN0_MSP1 (1 << 5)
|
|
#define SCTL_SCPEREN0_MSP2 (1 << 6)
|
|
#define SCTL_SCPEREN0_MSP3 (1 << 7)
|
|
#define SCTL_SCPEREN0_MSP4 (1 << 8)
|
|
#define SCTL_SCPEREN0_MSP5 (1 << 9)
|
|
#define SCTL_SCPEREN0_SPI0 (1 << 10)
|
|
#define SCTL_SCPEREN0_SPI1 (1 << 11)
|
|
#define SCTL_SCPEREN0_SPI2 (1 << 12)
|
|
#define SCTL_SCPEREN0_I2C0 (1 << 13)
|
|
#define SCTL_SCPEREN0_I2C1 (1 << 14)
|
|
#define SCTL_SCPEREN0_I2C2 (1 << 15)
|
|
#define SCTL_SCPEREN0_I2C3 (1 << 16)
|
|
#define SCTL_SCPEREN0_SVDO_LVDS (1 << 17)
|
|
#define SCTL_SCPEREN0_USB_HOST (1 << 18)
|
|
#define SCTL_SCPEREN0_USB_OTG (1 << 19)
|
|
#define SCTL_SCPEREN0_MCI0 (1 << 20)
|
|
#define SCTL_SCPEREN0_MCI1 (1 << 21)
|
|
#define SCTL_SCPEREN0_MCI2 (1 << 22)
|
|
#define SCTL_SCPEREN0_MCI3 (1 << 23)
|
|
#define SCTL_SCPEREN0_SATA (1 << 24)
|
|
#define SCTL_SCPEREN0_ETHERNET (1 << 25)
|
|
#define SCTL_SCPEREN0_VIC (1 << 26)
|
|
#define SCTL_SCPEREN0_DMA_AUDIO (1 << 27)
|
|
#define SCTL_SCPEREN0_DMA_SOC (1 << 28)
|
|
#define SCTL_SCPEREN0_RAM (1 << 29)
|
|
#define SCTL_SCPEREN0_VIP (1 << 30)
|
|
#define SCTL_SCPEREN0_ARM (1 << 31)
|
|
|
|
#define SCTL_SCPEREN1_UART0 (1 << 0)
|
|
#define SCTL_SCPEREN1_UART1 (1 << 1)
|
|
#define SCTL_SCPEREN1_UART2 (1 << 2)
|
|
#define SCTL_SCPEREN1_UART3 (1 << 3)
|
|
#define SCTL_SCPEREN1_MSP0 (1 << 4)
|
|
#define SCTL_SCPEREN1_MSP1 (1 << 5)
|
|
#define SCTL_SCPEREN1_MSP2 (1 << 6)
|
|
#define SCTL_SCPEREN1_MSP3 (1 << 7)
|
|
#define SCTL_SCPEREN1_MSP4 (1 << 8)
|
|
#define SCTL_SCPEREN1_MSP5 (1 << 9)
|
|
#define SCTL_SCPEREN1_SPI0 (1 << 10)
|
|
#define SCTL_SCPEREN1_SPI1 (1 << 11)
|
|
#define SCTL_SCPEREN1_SPI2 (1 << 12)
|
|
#define SCTL_SCPEREN1_I2C0 (1 << 13)
|
|
#define SCTL_SCPEREN1_I2C1 (1 << 14)
|
|
#define SCTL_SCPEREN1_I2C2 (1 << 15)
|
|
#define SCTL_SCPEREN1_I2C3 (1 << 16)
|
|
#define SCTL_SCPEREN1_USB_PHY (1 << 17)
|
|
|
|
/*
|
|
* APB-SOC registers
|
|
*/
|
|
static inline
|
|
u32 sta2x11_apb_soc_regs_mask(struct pci_dev *pdev, u32 reg, u32 mask, u32 val)
|
|
{
|
|
return __sta2x11_mfd_mask(pdev, reg, mask, val, sta2x11_apb_soc_regs);
|
|
}
|
|
|
|
#define PCIE_EP1_FUNC3_0_INTR_REG 0x000
|
|
#define PCIE_EP1_FUNC7_4_INTR_REG 0x004
|
|
#define PCIE_EP2_FUNC3_0_INTR_REG 0x008
|
|
#define PCIE_EP2_FUNC7_4_INTR_REG 0x00c
|
|
#define PCIE_EP3_FUNC3_0_INTR_REG 0x010
|
|
#define PCIE_EP3_FUNC7_4_INTR_REG 0x014
|
|
#define PCIE_EP4_FUNC3_0_INTR_REG 0x018
|
|
#define PCIE_EP4_FUNC7_4_INTR_REG 0x01c
|
|
#define PCIE_INTR_ENABLE0_REG 0x020
|
|
#define PCIE_INTR_ENABLE1_REG 0x024
|
|
#define PCIE_EP1_FUNC_TC_REG 0x028
|
|
#define PCIE_EP2_FUNC_TC_REG 0x02c
|
|
#define PCIE_EP3_FUNC_TC_REG 0x030
|
|
#define PCIE_EP4_FUNC_TC_REG 0x034
|
|
#define PCIE_EP1_FUNC_F_REG 0x038
|
|
#define PCIE_EP2_FUNC_F_REG 0x03c
|
|
#define PCIE_EP3_FUNC_F_REG 0x040
|
|
#define PCIE_EP4_FUNC_F_REG 0x044
|
|
#define PCIE_PAB_AMBA_SW_RST_REG 0x048
|
|
#define PCIE_PM_STATUS_0_PORT_0_4 0x04c
|
|
#define PCIE_PM_STATUS_7_0_EP1 0x050
|
|
#define PCIE_PM_STATUS_7_0_EP2 0x054
|
|
#define PCIE_PM_STATUS_7_0_EP3 0x058
|
|
#define PCIE_PM_STATUS_7_0_EP4 0x05c
|
|
#define PCIE_DEV_ID_0_EP1_REG 0x060
|
|
#define PCIE_CC_REV_ID_0_EP1_REG 0x064
|
|
#define PCIE_DEV_ID_1_EP1_REG 0x068
|
|
#define PCIE_CC_REV_ID_1_EP1_REG 0x06c
|
|
#define PCIE_DEV_ID_2_EP1_REG 0x070
|
|
#define PCIE_CC_REV_ID_2_EP1_REG 0x074
|
|
#define PCIE_DEV_ID_3_EP1_REG 0x078
|
|
#define PCIE_CC_REV_ID_3_EP1_REG 0x07c
|
|
#define PCIE_DEV_ID_4_EP1_REG 0x080
|
|
#define PCIE_CC_REV_ID_4_EP1_REG 0x084
|
|
#define PCIE_DEV_ID_5_EP1_REG 0x088
|
|
#define PCIE_CC_REV_ID_5_EP1_REG 0x08c
|
|
#define PCIE_DEV_ID_6_EP1_REG 0x090
|
|
#define PCIE_CC_REV_ID_6_EP1_REG 0x094
|
|
#define PCIE_DEV_ID_7_EP1_REG 0x098
|
|
#define PCIE_CC_REV_ID_7_EP1_REG 0x09c
|
|
#define PCIE_DEV_ID_0_EP2_REG 0x0a0
|
|
#define PCIE_CC_REV_ID_0_EP2_REG 0x0a4
|
|
#define PCIE_DEV_ID_1_EP2_REG 0x0a8
|
|
#define PCIE_CC_REV_ID_1_EP2_REG 0x0ac
|
|
#define PCIE_DEV_ID_2_EP2_REG 0x0b0
|
|
#define PCIE_CC_REV_ID_2_EP2_REG 0x0b4
|
|
#define PCIE_DEV_ID_3_EP2_REG 0x0b8
|
|
#define PCIE_CC_REV_ID_3_EP2_REG 0x0bc
|
|
#define PCIE_DEV_ID_4_EP2_REG 0x0c0
|
|
#define PCIE_CC_REV_ID_4_EP2_REG 0x0c4
|
|
#define PCIE_DEV_ID_5_EP2_REG 0x0c8
|
|
#define PCIE_CC_REV_ID_5_EP2_REG 0x0cc
|
|
#define PCIE_DEV_ID_6_EP2_REG 0x0d0
|
|
#define PCIE_CC_REV_ID_6_EP2_REG 0x0d4
|
|
#define PCIE_DEV_ID_7_EP2_REG 0x0d8
|
|
#define PCIE_CC_REV_ID_7_EP2_REG 0x0dC
|
|
#define PCIE_DEV_ID_0_EP3_REG 0x0e0
|
|
#define PCIE_CC_REV_ID_0_EP3_REG 0x0e4
|
|
#define PCIE_DEV_ID_1_EP3_REG 0x0e8
|
|
#define PCIE_CC_REV_ID_1_EP3_REG 0x0ec
|
|
#define PCIE_DEV_ID_2_EP3_REG 0x0f0
|
|
#define PCIE_CC_REV_ID_2_EP3_REG 0x0f4
|
|
#define PCIE_DEV_ID_3_EP3_REG 0x0f8
|
|
#define PCIE_CC_REV_ID_3_EP3_REG 0x0fc
|
|
#define PCIE_DEV_ID_4_EP3_REG 0x100
|
|
#define PCIE_CC_REV_ID_4_EP3_REG 0x104
|
|
#define PCIE_DEV_ID_5_EP3_REG 0x108
|
|
#define PCIE_CC_REV_ID_5_EP3_REG 0x10c
|
|
#define PCIE_DEV_ID_6_EP3_REG 0x110
|
|
#define PCIE_CC_REV_ID_6_EP3_REG 0x114
|
|
#define PCIE_DEV_ID_7_EP3_REG 0x118
|
|
#define PCIE_CC_REV_ID_7_EP3_REG 0x11c
|
|
#define PCIE_DEV_ID_0_EP4_REG 0x120
|
|
#define PCIE_CC_REV_ID_0_EP4_REG 0x124
|
|
#define PCIE_DEV_ID_1_EP4_REG 0x128
|
|
#define PCIE_CC_REV_ID_1_EP4_REG 0x12c
|
|
#define PCIE_DEV_ID_2_EP4_REG 0x130
|
|
#define PCIE_CC_REV_ID_2_EP4_REG 0x134
|
|
#define PCIE_DEV_ID_3_EP4_REG 0x138
|
|
#define PCIE_CC_REV_ID_3_EP4_REG 0x13c
|
|
#define PCIE_DEV_ID_4_EP4_REG 0x140
|
|
#define PCIE_CC_REV_ID_4_EP4_REG 0x144
|
|
#define PCIE_DEV_ID_5_EP4_REG 0x148
|
|
#define PCIE_CC_REV_ID_5_EP4_REG 0x14c
|
|
#define PCIE_DEV_ID_6_EP4_REG 0x150
|
|
#define PCIE_CC_REV_ID_6_EP4_REG 0x154
|
|
#define PCIE_DEV_ID_7_EP4_REG 0x158
|
|
#define PCIE_CC_REV_ID_7_EP4_REG 0x15c
|
|
#define PCIE_SUBSYS_VEN_ID_REG 0x160
|
|
#define PCIE_COMMON_CLOCK_CONFIG_0_4_0 0x164
|
|
#define PCIE_MIPHYP_SSC_EN_REG 0x168
|
|
#define PCIE_MIPHYP_ADDR_REG 0x16c
|
|
#define PCIE_L1_ASPM_READY_REG 0x170
|
|
#define PCIE_EXT_CFG_RDY_REG 0x174
|
|
#define PCIE_SoC_INT_ROUTER_STATUS0_REG 0x178
|
|
#define PCIE_SoC_INT_ROUTER_STATUS1_REG 0x17c
|
|
#define PCIE_SoC_INT_ROUTER_STATUS2_REG 0x180
|
|
#define PCIE_SoC_INT_ROUTER_STATUS3_REG 0x184
|
|
#define DMA_IP_CTRL_REG 0x324
|
|
#define DISP_BRIDGE_PU_PD_CTRL_REG 0x328
|
|
#define VIP_PU_PD_CTRL_REG 0x32c
|
|
#define USB_MLB_PU_PD_CTRL_REG 0x330
|
|
#define SDIO_PU_PD_MISCFUNC_CTRL_REG1 0x334
|
|
#define SDIO_PU_PD_MISCFUNC_CTRL_REG2 0x338
|
|
#define UART_PU_PD_CTRL_REG 0x33c
|
|
#define ARM_Lock 0x340
|
|
#define SYS_IO_CHAR_REG1 0x344
|
|
#define SYS_IO_CHAR_REG2 0x348
|
|
#define SATA_CORE_ID_REG 0x34c
|
|
#define SATA_CTRL_REG 0x350
|
|
#define I2C_HSFIX_MISC_REG 0x354
|
|
#define SPARE2_RESERVED 0x358
|
|
#define SPARE3_RESERVED 0x35c
|
|
#define MASTER_LOCK_REG 0x368
|
|
#define SYSTEM_CONFIG_STATUS_REG 0x36c
|
|
#define MSP_CLK_CTRL_REG 0x39c
|
|
#define COMPENSATION_REG1 0x3c4
|
|
#define COMPENSATION_REG2 0x3c8
|
|
#define COMPENSATION_REG3 0x3cc
|
|
#define TEST_CTL_REG 0x3d0
|
|
|
|
/*
|
|
* SECR (OTP) registers
|
|
*/
|
|
#define STA2X11_SECR_CR 0x00
|
|
#define STA2X11_SECR_FVR0 0x10
|
|
#define STA2X11_SECR_FVR1 0x14
|
|
|
|
extern int sta2x11_mfd_get_regs_data(struct platform_device *pdev,
|
|
enum sta2x11_mfd_plat_dev index,
|
|
void __iomem **regs,
|
|
spinlock_t **lock);
|
|
|
|
#endif /* __STA2X11_MFD_H */
|