linux-headers/include/linux/power/charger-manager.h

259 lines
7.6 KiB
C

/* SPDX-License-Identifier: GPL-2.0-only */
/*
* Copyright (C) 2011 Samsung Electronics Co., Ltd.
* MyungJoo.Ham <myungjoo.ham@samsung.com>
*
* Charger Manager.
* This framework enables to control and multiple chargers and to
* monitor charging even in the context of suspend-to-RAM with
* an interface combining the chargers.
*
**/
#ifndef _CHARGER_MANAGER_H
#define _CHARGER_MANAGER_H
#include <linux/power_supply.h>
#include <linux/extcon.h>
#include <linux/alarmtimer.h>
enum data_source {
CM_BATTERY_PRESENT,
CM_NO_BATTERY,
CM_FUEL_GAUGE,
CM_CHARGER_STAT,
};
enum polling_modes {
CM_POLL_DISABLE = 0,
CM_POLL_ALWAYS,
CM_POLL_EXTERNAL_POWER_ONLY,
CM_POLL_CHARGING_ONLY,
};
enum cm_event_types {
CM_EVENT_UNKNOWN = 0,
CM_EVENT_BATT_FULL,
CM_EVENT_BATT_IN,
CM_EVENT_BATT_OUT,
CM_EVENT_BATT_OVERHEAT,
CM_EVENT_BATT_COLD,
CM_EVENT_EXT_PWR_IN_OUT,
CM_EVENT_CHG_START_STOP,
CM_EVENT_OTHERS,
};
/**
* struct charger_cable
* @extcon_name: the name of extcon device.
* @name: the name of charger cable(external connector).
* @extcon_dev: the extcon device.
* @wq: the workqueue to control charger according to the state of
* charger cable. If charger cable is attached, enable charger.
* But if charger cable is detached, disable charger.
* @nb: the notifier block to receive changed state from EXTCON
* (External Connector) when charger cable is attached/detached.
* @attached: the state of charger cable.
* true: the charger cable is attached
* false: the charger cable is detached
* @charger: the instance of struct charger_regulator.
* @cm: the Charger Manager representing the battery.
*/
struct charger_cable {
const char *extcon_name;
const char *name;
/* The charger-manager use Extcon framework */
struct extcon_specific_cable_nb extcon_dev;
struct work_struct wq;
struct notifier_block nb;
/* The state of charger cable */
bool attached;
struct charger_regulator *charger;
/*
* Set min/max current of regulator to protect over-current issue
* according to a kind of charger cable when cable is attached.
*/
int min_uA;
int max_uA;
struct charger_manager *cm;
};
/**
* struct charger_regulator
* @regulator_name: the name of regulator for using charger.
* @consumer: the regulator consumer for the charger.
* @externally_control:
* Set if the charger-manager cannot control charger,
* the charger will be maintained with disabled state.
* @cables:
* the array of charger cables to enable/disable charger
* and set current limit according to constraint data of
* struct charger_cable if only charger cable included
* in the array of charger cables is attached/detached.
* @num_cables: the number of charger cables.
* @attr_g: Attribute group for the charger(regulator)
* @attr_name: "name" sysfs entry
* @attr_state: "state" sysfs entry
* @attr_externally_control: "externally_control" sysfs entry
* @attrs: Arrays pointing to attr_name/state/externally_control for attr_g
*/
struct charger_regulator {
/* The name of regulator for charging */
const char *regulator_name;
struct regulator *consumer;
/* charger never on when system is on */
int externally_control;
/*
* Store constraint information related to current limit,
* each cable have different condition for charging.
*/
struct charger_cable *cables;
int num_cables;
struct attribute_group attr_grp;
struct device_attribute attr_name;
struct device_attribute attr_state;
struct device_attribute attr_externally_control;
struct attribute *attrs[4];
struct charger_manager *cm;
};
/**
* struct charger_desc
* @psy_name: the name of power-supply-class for charger manager
* @polling_mode:
* Determine which polling mode will be used
* @fullbatt_vchkdrop_ms:
* @fullbatt_vchkdrop_uV:
* Check voltage drop after the battery is fully charged.
* If it has dropped more than fullbatt_vchkdrop_uV after
* fullbatt_vchkdrop_ms, CM will restart charging.
* @fullbatt_uV: voltage in microvolt
* If VBATT >= fullbatt_uV, it is assumed to be full.
* @fullbatt_soc: state of Charge in %
* If state of Charge >= fullbatt_soc, it is assumed to be full.
* @fullbatt_full_capacity: full capacity measure
* If full capacity of battery >= fullbatt_full_capacity,
* it is assumed to be full.
* @polling_interval_ms: interval in millisecond at which
* charger manager will monitor battery health
* @battery_present:
* Specify where information for existence of battery can be obtained
* @psy_charger_stat: the names of power-supply for chargers
* @num_charger_regulator: the number of entries in charger_regulators
* @charger_regulators: array of charger regulators
* @psy_fuel_gauge: the name of power-supply for fuel gauge
* @thermal_zone : the name of thermal zone for battery
* @temp_min : Minimum battery temperature for charging.
* @temp_max : Maximum battery temperature for charging.
* @temp_diff : Temperature difference to restart charging.
* @measure_battery_temp:
* true: measure battery temperature
* false: measure ambient temperature
* @charging_max_duration_ms: Maximum possible duration for charging
* If whole charging duration exceed 'charging_max_duration_ms',
* cm stop charging.
* @discharging_max_duration_ms:
* Maximum possible duration for discharging with charger cable
* after full-batt. If discharging duration exceed 'discharging
* max_duration_ms', cm start charging.
*/
struct charger_desc {
const char *psy_name;
enum polling_modes polling_mode;
unsigned int polling_interval_ms;
unsigned int fullbatt_vchkdrop_ms;
unsigned int fullbatt_vchkdrop_uV;
unsigned int fullbatt_uV;
unsigned int fullbatt_soc;
unsigned int fullbatt_full_capacity;
enum data_source battery_present;
const char **psy_charger_stat;
int num_charger_regulators;
struct charger_regulator *charger_regulators;
const struct attribute_group **sysfs_groups;
const char *psy_fuel_gauge;
const char *thermal_zone;
int temp_min;
int temp_max;
int temp_diff;
bool measure_battery_temp;
u32 charging_max_duration_ms;
u32 discharging_max_duration_ms;
};
#define PSY_NAME_MAX 30
/**
* struct charger_manager
* @entry: entry for list
* @dev: device pointer
* @desc: instance of charger_desc
* @fuel_gauge: power_supply for fuel gauge
* @charger_stat: array of power_supply for chargers
* @tzd_batt : thermal zone device for battery
* @charger_enabled: the state of charger
* @fullbatt_vchk_jiffies_at:
* jiffies at the time full battery check will occur.
* @fullbatt_vchk_work: work queue for full battery check
* @emergency_stop:
* When setting true, stop charging
* @psy_name_buf: the name of power-supply-class for charger manager
* @charger_psy: power_supply for charger manager
* @status_save_ext_pwr_inserted:
* saved status of external power before entering suspend-to-RAM
* @status_save_batt:
* saved status of battery before entering suspend-to-RAM
* @charging_start_time: saved start time of enabling charging
* @charging_end_time: saved end time of disabling charging
*/
struct charger_manager {
struct list_head entry;
struct device *dev;
struct charger_desc *desc;
#ifdef CONFIG_THERMAL
struct thermal_zone_device *tzd_batt;
#endif
bool charger_enabled;
unsigned long fullbatt_vchk_jiffies_at;
struct delayed_work fullbatt_vchk_work;
int emergency_stop;
char psy_name_buf[PSY_NAME_MAX + 1];
struct power_supply_desc charger_psy_desc;
struct power_supply *charger_psy;
u64 charging_start_time;
u64 charging_end_time;
};
#ifdef CONFIG_CHARGER_MANAGER
extern void cm_notify_event(struct power_supply *psy,
enum cm_event_types type, char *msg);
#else
static inline void cm_notify_event(struct power_supply *psy,
enum cm_event_types type, char *msg) { }
#endif
#endif /* _CHARGER_MANAGER_H */