OpenE2K/linux-headers
2
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
b92383663a
linux-headers/include/linux/fsl/guts.h

322 lines
12 KiB
C
Raw Blame History

/* SPDX-License-Identifier: GPL-2.0-or-later */
/**
* Freecale 85xx and 86xx Global Utilties register set
*
* Authors: Jeff Brown
* Timur Tabi <timur@freescale.com>
*
* Copyright 2004,2007,2012 Freescale Semiconductor, Inc
*/
#ifndef __FSL_GUTS_H__
#define __FSL_GUTS_H__
#include <linux/types.h>
#include <linux/io.h>
/**
* Global Utility Registers.
*
* Not all registers defined in this structure are available on all chips, so
* you are expected to know whether a given register actually exists on your
* chip before you access it.
*
* Also, some registers are similar on different chips but have slightly
* different names. In these cases, one name is chosen to avoid extraneous
* #ifdefs.
*/
struct ccsr_guts {
u32 porpllsr; /* 0x.0000 - POR PLL Ratio Status Register */
u32 porbmsr; /* 0x.0004 - POR Boot Mode Status Register */
u32 porimpscr; /* 0x.0008 - POR I/O Impedance Status and
* Control Register
*/
u32 pordevsr; /* 0x.000c - POR I/O Device Status Register */
u32 pordbgmsr; /* 0x.0010 - POR Debug Mode Status Register */
u32 pordevsr2; /* 0x.0014 - POR device status register 2 */
u8 res018[0x20 - 0x18];
u32 porcir; /* 0x.0020 - POR Configuration Information
* Register
*/
u8 res024[0x30 - 0x24];
u32 gpiocr; /* 0x.0030 - GPIO Control Register */
u8 res034[0x40 - 0x34];
u32 gpoutdr; /* 0x.0040 - General-Purpose Output Data
* Register
*/
u8 res044[0x50 - 0x44];
u32 gpindr; /* 0x.0050 - General-Purpose Input Data
* Register
*/
u8 res054[0x60 - 0x54];
u32 pmuxcr; /* 0x.0060 - Alternate Function Signal
* Multiplex Control
*/
u32 pmuxcr2; /* 0x.0064 - Alternate function signal
* multiplex control 2
*/
u32 dmuxcr; /* 0x.0068 - DMA Mux Control Register */
u8 res06c[0x70 - 0x6c];
u32 devdisr; /* 0x.0070 - Device Disable Control */
#define CCSR_GUTS_DEVDISR_TB1 0x00001000
#define CCSR_GUTS_DEVDISR_TB0 0x00004000
u32 devdisr2; /* 0x.0074 - Device Disable Control 2 */
u8 res078[0x7c - 0x78];
u32 pmjcr; /* 0x.007c - 4 Power Management Jog Control
* Register
*/
u32 powmgtcsr; /* 0x.0080 - Power Management Status and
* Control Register
*/
u32 pmrccr; /* 0x.0084 - Power Management Reset Counter
* Configuration Register
*/
u32 pmpdccr; /* 0x.0088 - Power Management Power Down Counter
* Configuration Register
*/
u32 pmcdr; /* 0x.008c - 4Power management clock disable
* register
*/
u32 mcpsumr; /* 0x.0090 - Machine Check Summary Register */
u32 rstrscr; /* 0x.0094 - Reset Request Status and
* Control Register
*/
u32 ectrstcr; /* 0x.0098 - Exception reset control register */
u32 autorstsr; /* 0x.009c - Automatic reset status register */
u32 pvr; /* 0x.00a0 - Processor Version Register */
u32 svr; /* 0x.00a4 - System Version Register */
u8 res0a8[0xb0 - 0xa8];
u32 rstcr; /* 0x.00b0 - Reset Control Register */
u8 res0b4[0xc0 - 0xb4];
u32 iovselsr; /* 0x.00c0 - I/O voltage select status register
Called 'elbcvselcr' on 86xx SOCs */
u8 res0c4[0x100 - 0xc4];
u32 rcwsr[16]; /* 0x.0100 - Reset Control Word Status registers
There are 16 registers */
u8 res140[0x224 - 0x140];
u32 iodelay1; /* 0x.0224 - IO delay control register 1 */
u32 iodelay2; /* 0x.0228 - IO delay control register 2 */
u8 res22c[0x604 - 0x22c];
u32 pamubypenr; /* 0x.604 - PAMU bypass enable register */
u8 res608[0x800 - 0x608];
u32 clkdvdr; /* 0x.0800 - Clock Divide Register */
u8 res804[0x900 - 0x804];
u32 ircr; /* 0x.0900 - Infrared Control Register */
u8 res904[0x908 - 0x904];
u32 dmacr; /* 0x.0908 - DMA Control Register */
u8 res90c[0x914 - 0x90c];
u32 elbccr; /* 0x.0914 - eLBC Control Register */
u8 res918[0xb20 - 0x918];
u32 ddr1clkdr; /* 0x.0b20 - DDR1 Clock Disable Register */
u32 ddr2clkdr; /* 0x.0b24 - DDR2 Clock Disable Register */
u32 ddrclkdr; /* 0x.0b28 - DDR Clock Disable Register */
u8 resb2c[0xe00 - 0xb2c];
u32 clkocr; /* 0x.0e00 - Clock Out Select Register */
u8 rese04[0xe10 - 0xe04];
u32 ddrdllcr; /* 0x.0e10 - DDR DLL Control Register */
u8 rese14[0xe20 - 0xe14];
u32 lbcdllcr; /* 0x.0e20 - LBC DLL Control Register */
u32 cpfor; /* 0x.0e24 - L2 charge pump fuse override
* register
*/
u8 rese28[0xf04 - 0xe28];
u32 srds1cr0; /* 0x.0f04 - SerDes1 Control Register 0 */
u32 srds1cr1; /* 0x.0f08 - SerDes1 Control Register 0 */
u8 resf0c[0xf2c - 0xf0c];
u32 itcr; /* 0x.0f2c - Internal transaction control
* register
*/
u8 resf30[0xf40 - 0xf30];
u32 srds2cr0; /* 0x.0f40 - SerDes2 Control Register 0 */
u32 srds2cr1; /* 0x.0f44 - SerDes2 Control Register 0 */
} __attribute__ ((packed));
/* Alternate function signal multiplex control */
#define MPC85xx_PMUXCR_QE(x) (0x8000 >> (x))
#ifdef CONFIG_PPC_86xx
#define CCSR_GUTS_DMACR_DEV_SSI 0 /* DMA controller/channel set to SSI */
#define CCSR_GUTS_DMACR_DEV_IR 1 /* DMA controller/channel set to IR */
/*
* Set the DMACR register in the GUTS
*
* The DMACR register determines the source of initiated transfers for each
* channel on each DMA controller. Rather than have a bunch of repetitive
* macros for the bit patterns, we just have a function that calculates
* them.
*
* guts: Pointer to GUTS structure
* co: The DMA controller (0 or 1)
* ch: The channel on the DMA controller (0, 1, 2, or 3)
* device: The device to set as the source (CCSR_GUTS_DMACR_DEV_xx)
*/
static inline void guts_set_dmacr(struct ccsr_guts __iomem *guts,
unsigned int co, unsigned int ch, unsigned int device)
{
unsigned int shift = 16 + (8 * (1 - co) + 2 * (3 - ch));
clrsetbits_be32(&guts->dmacr, 3 << shift, device << shift);
}
#define CCSR_GUTS_PMUXCR_LDPSEL 0x00010000
#define CCSR_GUTS_PMUXCR_SSI1_MASK 0x0000C000 /* Bitmask for SSI1 */
#define CCSR_GUTS_PMUXCR_SSI1_LA 0x00000000 /* Latched address */
#define CCSR_GUTS_PMUXCR_SSI1_HI 0x00004000 /* High impedance */
#define CCSR_GUTS_PMUXCR_SSI1_SSI 0x00008000 /* Used for SSI1 */
#define CCSR_GUTS_PMUXCR_SSI2_MASK 0x00003000 /* Bitmask for SSI2 */
#define CCSR_GUTS_PMUXCR_SSI2_LA 0x00000000 /* Latched address */
#define CCSR_GUTS_PMUXCR_SSI2_HI 0x00001000 /* High impedance */
#define CCSR_GUTS_PMUXCR_SSI2_SSI 0x00002000 /* Used for SSI2 */
#define CCSR_GUTS_PMUXCR_LA_22_25_LA 0x00000000 /* Latched Address */
#define CCSR_GUTS_PMUXCR_LA_22_25_HI 0x00000400 /* High impedance */
#define CCSR_GUTS_PMUXCR_DBGDRV 0x00000200 /* Signals not driven */
#define CCSR_GUTS_PMUXCR_DMA2_0 0x00000008
#define CCSR_GUTS_PMUXCR_DMA2_3 0x00000004
#define CCSR_GUTS_PMUXCR_DMA1_0 0x00000002
#define CCSR_GUTS_PMUXCR_DMA1_3 0x00000001
/*
* Set the DMA external control bits in the GUTS
*
* The DMA external control bits in the PMUXCR are only meaningful for
* channels 0 and 3. Any other channels are ignored.
*
* guts: Pointer to GUTS structure
* co: The DMA controller (0 or 1)
* ch: The channel on the DMA controller (0, 1, 2, or 3)
* value: the new value for the bit (0 or 1)
*/
static inline void guts_set_pmuxcr_dma(struct ccsr_guts __iomem *guts,
unsigned int co, unsigned int ch, unsigned int value)
{
if ((ch == 0) || (ch == 3)) {
unsigned int shift = 2 * (co + 1) - (ch & 1) - 1;
clrsetbits_be32(&guts->pmuxcr, 1 << shift, value << shift);
}
}
#define CCSR_GUTS_CLKDVDR_PXCKEN 0x80000000
#define CCSR_GUTS_CLKDVDR_SSICKEN 0x20000000
#define CCSR_GUTS_CLKDVDR_PXCKINV 0x10000000
#define CCSR_GUTS_CLKDVDR_PXCKDLY_SHIFT 25
#define CCSR_GUTS_CLKDVDR_PXCKDLY_MASK 0x06000000
#define CCSR_GUTS_CLKDVDR_PXCKDLY(x) \
(((x) & 3) << CCSR_GUTS_CLKDVDR_PXCKDLY_SHIFT)
#define CCSR_GUTS_CLKDVDR_PXCLK_SHIFT 16
#define CCSR_GUTS_CLKDVDR_PXCLK_MASK 0x001F0000
#define CCSR_GUTS_CLKDVDR_PXCLK(x) (((x) & 31) << CCSR_GUTS_CLKDVDR_PXCLK_SHIFT)
#define CCSR_GUTS_CLKDVDR_SSICLK_MASK 0x000000FF
#define CCSR_GUTS_CLKDVDR_SSICLK(x) ((x) & CCSR_GUTS_CLKDVDR_SSICLK_MASK)
#endif
struct ccsr_rcpm_v1 {
u8 res0000[4];
__be32 cdozsr; /* 0x0004 Core Doze Status Register */
u8 res0008[4];
__be32 cdozcr; /* 0x000c Core Doze Control Register */
u8 res0010[4];
__be32 cnapsr; /* 0x0014 Core Nap Status Register */
u8 res0018[4];
__be32 cnapcr; /* 0x001c Core Nap Control Register */
u8 res0020[4];
__be32 cdozpsr; /* 0x0024 Core Doze Previous Status Register */
u8 res0028[4];
__be32 cnappsr; /* 0x002c Core Nap Previous Status Register */
u8 res0030[4];
__be32 cwaitsr; /* 0x0034 Core Wait Status Register */
u8 res0038[4];
__be32 cwdtdsr; /* 0x003c Core Watchdog Detect Status Register */
__be32 powmgtcsr; /* 0x0040 PM Control&Status Register */
#define RCPM_POWMGTCSR_SLP 0x00020000
u8 res0044[12];
__be32 ippdexpcr; /* 0x0050 IP Powerdown Exception Control Register */
u8 res0054[16];
__be32 cpmimr; /* 0x0064 Core PM IRQ Mask Register */
u8 res0068[4];
__be32 cpmcimr; /* 0x006c Core PM Critical IRQ Mask Register */
u8 res0070[4];
__be32 cpmmcmr; /* 0x0074 Core PM Machine Check Mask Register */
u8 res0078[4];
__be32 cpmnmimr; /* 0x007c Core PM NMI Mask Register */
u8 res0080[4];
__be32 ctbenr; /* 0x0084 Core Time Base Enable Register */
u8 res0088[4];
__be32 ctbckselr; /* 0x008c Core Time Base Clock Select Register */
u8 res0090[4];
__be32 ctbhltcr; /* 0x0094 Core Time Base Halt Control Register */
u8 res0098[4];
__be32 cmcpmaskcr; /* 0x00a4 Core Machine Check Mask Register */
};
struct ccsr_rcpm_v2 {
u8 res_00[12];
__be32 tph10sr0; /* Thread PH10 Status Register */
u8 res_10[12];
__be32 tph10setr0; /* Thread PH10 Set Control Register */
u8 res_20[12];
__be32 tph10clrr0; /* Thread PH10 Clear Control Register */
u8 res_30[12];
__be32 tph10psr0; /* Thread PH10 Previous Status Register */
u8 res_40[12];
__be32 twaitsr0; /* Thread Wait Status Register */
u8 res_50[96];
__be32 pcph15sr; /* Physical Core PH15 Status Register */
__be32 pcph15setr; /* Physical Core PH15 Set Control Register */
__be32 pcph15clrr; /* Physical Core PH15 Clear Control Register */
__be32 pcph15psr; /* Physical Core PH15 Prev Status Register */
u8 res_c0[16];
__be32 pcph20sr; /* Physical Core PH20 Status Register */
__be32 pcph20setr; /* Physical Core PH20 Set Control Register */
__be32 pcph20clrr; /* Physical Core PH20 Clear Control Register */
__be32 pcph20psr; /* Physical Core PH20 Prev Status Register */
__be32 pcpw20sr; /* Physical Core PW20 Status Register */
u8 res_e0[12];
__be32 pcph30sr; /* Physical Core PH30 Status Register */
__be32 pcph30setr; /* Physical Core PH30 Set Control Register */
__be32 pcph30clrr; /* Physical Core PH30 Clear Control Register */
__be32 pcph30psr; /* Physical Core PH30 Prev Status Register */
u8 res_100[32];
__be32 ippwrgatecr; /* IP Power Gating Control Register */
u8 res_124[12];
__be32 powmgtcsr; /* Power Management Control & Status Reg */
#define RCPM_POWMGTCSR_LPM20_RQ 0x00100000
#define RCPM_POWMGTCSR_LPM20_ST 0x00000200
#define RCPM_POWMGTCSR_P_LPM20_ST 0x00000100
u8 res_134[12];
__be32 ippdexpcr[4]; /* IP Powerdown Exception Control Reg */
u8 res_150[12];
__be32 tpmimr0; /* Thread PM Interrupt Mask Reg */
u8 res_160[12];
__be32 tpmcimr0; /* Thread PM Crit Interrupt Mask Reg */
u8 res_170[12];
__be32 tpmmcmr0; /* Thread PM Machine Check Interrupt Mask Reg */
u8 res_180[12];
__be32 tpmnmimr0; /* Thread PM NMI Mask Reg */
u8 res_190[12];
__be32 tmcpmaskcr0; /* Thread Machine Check Mask Control Reg */
__be32 pctbenr; /* Physical Core Time Base Enable Reg */
__be32 pctbclkselr; /* Physical Core Time Base Clock Select */
__be32 tbclkdivr; /* Time Base Clock Divider Register */
u8 res_1ac[4];
__be32 ttbhltcr[4]; /* Thread Time Base Halt Control Register */
__be32 clpcl10sr; /* Cluster PCL10 Status Register */
__be32 clpcl10setr; /* Cluster PCL30 Set Control Register */
__be32 clpcl10clrr; /* Cluster PCL30 Clear Control Register */
__be32 clpcl10psr; /* Cluster PCL30 Prev Status Register */
__be32 cddslpsetr; /* Core Domain Deep Sleep Set Register */
__be32 cddslpclrr; /* Core Domain Deep Sleep Clear Register */
__be32 cdpwroksetr; /* Core Domain Power OK Set Register */
__be32 cdpwrokclrr; /* Core Domain Power OK Clear Register */
__be32 cdpwrensr; /* Core Domain Power Enable Status Register */
__be32 cddslsr; /* Core Domain Deep Sleep Status Register */
u8 res_1e8[8];
__be32 dslpcntcr[8]; /* Deep Sleep Counter Cfg Register */
u8 res_300[3568];
};
#endif
Reference in New Issue View Git Blame Copy Permalink