linux/arch/mips/kernel/perf_event.c

589 lines
14 KiB
C
Raw Normal View History

/*
* Linux performance counter support for MIPS.
*
* Copyright (C) 2010 MIPS Technologies, Inc.
* Author: Deng-Cheng Zhu
*
* This code is based on the implementation for ARM, which is in turn
* based on the sparc64 perf event code and the x86 code. Performance
* counter access is based on the MIPS Oprofile code. And the callchain
* support references the code of MIPS stacktrace.c.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/cpumask.h>
#include <linux/interrupt.h>
#include <linux/smp.h>
#include <linux/kernel.h>
#include <linux/perf_event.h>
#include <linux/uaccess.h>
#include <asm/irq.h>
#include <asm/irq_regs.h>
#include <asm/stacktrace.h>
#include <asm/time.h> /* For perf_irq */
/* These are for 32bit counters. For 64bit ones, define them accordingly. */
#define MAX_PERIOD ((1ULL << 32) - 1)
#define VALID_COUNT 0x7fffffff
#define TOTAL_BITS 32
#define HIGHEST_BIT 31
#define MIPS_MAX_HWEVENTS 4
struct cpu_hw_events {
/* Array of events on this cpu. */
struct perf_event *events[MIPS_MAX_HWEVENTS];
/*
* Set the bit (indexed by the counter number) when the counter
* is used for an event.
*/
unsigned long used_mask[BITS_TO_LONGS(MIPS_MAX_HWEVENTS)];
/*
* The borrowed MSB for the performance counter. A MIPS performance
* counter uses its bit 31 (for 32bit counters) or bit 63 (for 64bit
* counters) as a factor of determining whether a counter overflow
* should be signaled. So here we use a separate MSB for each
* counter to make things easy.
*/
unsigned long msbs[BITS_TO_LONGS(MIPS_MAX_HWEVENTS)];
/*
* Software copy of the control register for each performance counter.
* MIPS CPUs vary in performance counters. They use this differently,
* and even may not use it.
*/
unsigned int saved_ctrl[MIPS_MAX_HWEVENTS];
};
DEFINE_PER_CPU(struct cpu_hw_events, cpu_hw_events) = {
.saved_ctrl = {0},
};
/* The description of MIPS performance events. */
struct mips_perf_event {
unsigned int event_id;
/*
* MIPS performance counters are indexed starting from 0.
* CNTR_EVEN indicates the indexes of the counters to be used are
* even numbers.
*/
unsigned int cntr_mask;
#define CNTR_EVEN 0x55555555
#define CNTR_ODD 0xaaaaaaaa
#ifdef CONFIG_MIPS_MT_SMP
enum {
T = 0,
V = 1,
P = 2,
} range;
#else
#define T
#define V
#define P
#endif
};
MIPS: Add support for hardware performance events (mipsxx) This patch adds the mipsxx Perf-events support based on the skeleton. Generic hardware events and cache events are now fully implemented for the 24K/34K/74K/1004K cores. To support other cores in mipsxx (such as R10000/SB1), the generic hardware event tables and cache event tables need to be filled out. To support other CPUs which have different PMU than mipsxx, such as RM9000 and LOONGSON2, the additional files perf_event_$cpu.c need to be created. Raw event is an important part of Perf-events. It helps the user collect performance data for events that are not listed as the generic hardware events and cache events but ARE supported by the CPU's PMU. This patch also adds this feature for mipsxx 24K/34K/74K/1004K. For how to use it, please refer to processor core software user's manual and the comments for mipsxx_pmu_map_raw_event() for more details. Please note that this is a "precise" implementation, which means the kernel will check whether the requested raw events are supported by this CPU and which hardware counters can be assigned for them. To test the functionality of Perf-event, you may want to compile the tool "perf" for your MIPS platform. You can refer to the following URL: http://www.linux-mips.org/archives/linux-mips/2010-10/msg00126.html You also need to customize the CFLAGS and LDFLAGS in tools/perf/Makefile for your libs, includes, etc. In case you encounter the boot failure in SMVP kernel on multi-threading CPUs, you may take a look at: http://www.linux-mips.org/git?p=linux-mti.git;a=commitdiff;h=5460815027d802697b879644c74f0e8365254020 Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@gmail.com> To: linux-mips@linux-mips.org Cc: a.p.zijlstra@chello.nl Cc: paulus@samba.org Cc: mingo@elte.hu Cc: acme@redhat.com Cc: jamie.iles@picochip.com Cc: ddaney@caviumnetworks.com Cc: matt@console-pimps.org Patchwork: https://patchwork.linux-mips.org/patch/1689/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> create mode 100644 arch/mips/kernel/perf_event_mipsxx.c
2010-10-12 13:37:24 +02:00
static struct mips_perf_event raw_event;
static DEFINE_MUTEX(raw_event_mutex);
#define UNSUPPORTED_PERF_EVENT_ID 0xffffffff
#define C(x) PERF_COUNT_HW_CACHE_##x
struct mips_pmu {
const char *name;
int irq;
irqreturn_t (*handle_irq)(int irq, void *dev);
int (*handle_shared_irq)(void);
void (*start)(void);
void (*stop)(void);
int (*alloc_counter)(struct cpu_hw_events *cpuc,
struct hw_perf_event *hwc);
u64 (*read_counter)(unsigned int idx);
void (*write_counter)(unsigned int idx, u64 val);
void (*enable_event)(struct hw_perf_event *evt, int idx);
void (*disable_event)(int idx);
MIPS: Add support for hardware performance events (mipsxx) This patch adds the mipsxx Perf-events support based on the skeleton. Generic hardware events and cache events are now fully implemented for the 24K/34K/74K/1004K cores. To support other cores in mipsxx (such as R10000/SB1), the generic hardware event tables and cache event tables need to be filled out. To support other CPUs which have different PMU than mipsxx, such as RM9000 and LOONGSON2, the additional files perf_event_$cpu.c need to be created. Raw event is an important part of Perf-events. It helps the user collect performance data for events that are not listed as the generic hardware events and cache events but ARE supported by the CPU's PMU. This patch also adds this feature for mipsxx 24K/34K/74K/1004K. For how to use it, please refer to processor core software user's manual and the comments for mipsxx_pmu_map_raw_event() for more details. Please note that this is a "precise" implementation, which means the kernel will check whether the requested raw events are supported by this CPU and which hardware counters can be assigned for them. To test the functionality of Perf-event, you may want to compile the tool "perf" for your MIPS platform. You can refer to the following URL: http://www.linux-mips.org/archives/linux-mips/2010-10/msg00126.html You also need to customize the CFLAGS and LDFLAGS in tools/perf/Makefile for your libs, includes, etc. In case you encounter the boot failure in SMVP kernel on multi-threading CPUs, you may take a look at: http://www.linux-mips.org/git?p=linux-mti.git;a=commitdiff;h=5460815027d802697b879644c74f0e8365254020 Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@gmail.com> To: linux-mips@linux-mips.org Cc: a.p.zijlstra@chello.nl Cc: paulus@samba.org Cc: mingo@elte.hu Cc: acme@redhat.com Cc: jamie.iles@picochip.com Cc: ddaney@caviumnetworks.com Cc: matt@console-pimps.org Patchwork: https://patchwork.linux-mips.org/patch/1689/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> create mode 100644 arch/mips/kernel/perf_event_mipsxx.c
2010-10-12 13:37:24 +02:00
const struct mips_perf_event *(*map_raw_event)(u64 config);
const struct mips_perf_event (*general_event_map)[PERF_COUNT_HW_MAX];
const struct mips_perf_event (*cache_event_map)
[PERF_COUNT_HW_CACHE_MAX]
[PERF_COUNT_HW_CACHE_OP_MAX]
[PERF_COUNT_HW_CACHE_RESULT_MAX];
unsigned int num_counters;
};
static const struct mips_pmu *mipspmu;
static int
mipspmu_event_set_period(struct perf_event *event,
struct hw_perf_event *hwc,
int idx)
{
struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
s64 left = local64_read(&hwc->period_left);
s64 period = hwc->sample_period;
int ret = 0;
u64 uleft;
unsigned long flags;
if (unlikely(left <= -period)) {
left = period;
local64_set(&hwc->period_left, left);
hwc->last_period = period;
ret = 1;
}
if (unlikely(left <= 0)) {
left += period;
local64_set(&hwc->period_left, left);
hwc->last_period = period;
ret = 1;
}
if (left > (s64)MAX_PERIOD)
left = MAX_PERIOD;
local64_set(&hwc->prev_count, (u64)-left);
local_irq_save(flags);
uleft = (u64)(-left) & MAX_PERIOD;
uleft > VALID_COUNT ?
set_bit(idx, cpuc->msbs) : clear_bit(idx, cpuc->msbs);
mipspmu->write_counter(idx, (u64)(-left) & VALID_COUNT);
local_irq_restore(flags);
perf_event_update_userpage(event);
return ret;
}
static void mipspmu_event_update(struct perf_event *event,
struct hw_perf_event *hwc,
int idx)
{
struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
unsigned long flags;
int shift = 64 - TOTAL_BITS;
s64 prev_raw_count, new_raw_count;
u64 delta;
again:
prev_raw_count = local64_read(&hwc->prev_count);
local_irq_save(flags);
/* Make the counter value be a "real" one. */
new_raw_count = mipspmu->read_counter(idx);
if (new_raw_count & (test_bit(idx, cpuc->msbs) << HIGHEST_BIT)) {
new_raw_count &= VALID_COUNT;
clear_bit(idx, cpuc->msbs);
} else
new_raw_count |= (test_bit(idx, cpuc->msbs) << HIGHEST_BIT);
local_irq_restore(flags);
if (local64_cmpxchg(&hwc->prev_count, prev_raw_count,
new_raw_count) != prev_raw_count)
goto again;
delta = (new_raw_count << shift) - (prev_raw_count << shift);
delta >>= shift;
local64_add(delta, &event->count);
local64_sub(delta, &hwc->period_left);
return;
}
MIPS, Perf-events: Work with the new PMU interface This is the MIPS part of the following commits by Peter Zijlstra: - a4eaf7f14675cb512d69f0c928055e73d0c6d252 perf: Rework the PMU methods Replace pmu::{enable,disable,start,stop,unthrottle} with pmu::{add,del,start,stop}, all of which take a flags argument. The new interface extends the capability to stop a counter while keeping it scheduled on the PMU. We replace the throttled state with the generic stopped state. This also allows us to efficiently stop/start counters over certain code paths (like IRQ handlers). It also allows scheduling a counter without it starting, allowing for a generic frozen state (useful for rotating stopped counters). The stopped state is implemented in two different ways, depending on how the architecture implemented the throttled state: 1) We disable the counter: a) the pmu has per-counter enable bits, we flip that b) we program a NOP event, preserving the counter state 2) We store the counter state and ignore all read/overflow events For MIPSXX, the stopped state is implemented in the way of 1.b as above. - 33696fc0d141bbbcb12f75b69608ea83282e3117 perf: Per PMU disable Changes perf_disable() into perf_pmu_disable(). - 24cd7f54a0d47e1d5b3de29e2456bfbd2d8447b7 perf: Reduce perf_disable() usage Since the current perf_disable() usage is only an optimization, remove it for now. This eases the removal of the __weak hw_perf_enable() interface. - b0a873ebbf87bf38bf70b5e39a7cadc96099fa13 perf: Register PMU implementations Simple registration interface for struct pmu, this provides the infrastructure for removing all the weak functions. - 51b0fe39549a04858001922919ab355dee9bdfcf perf: Deconstify struct pmu sed -ie 's/const struct pmu\>/struct pmu/g' `git grep -l "const struct pmu\>"` Reported-by: Wu Zhangjin <wuzhangjin@gmail.com> Acked-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@gmail.com> To: a.p.zijlstra@chello.nl To: fweisbec@gmail.com To: will.deacon@arm.com Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: wuzhangjin@gmail.com Cc: paulus@samba.org Cc: mingo@elte.hu Cc: acme@redhat.com Cc: dengcheng.zhu@gmail.com Cc: matt@console-pimps.org Cc: sshtylyov@mvista.com Cc: ddaney@caviumnetworks.com Patchwork: http://patchwork.linux-mips.org/patch/2012/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-01-21 09:19:18 +01:00
static void mipspmu_start(struct perf_event *event, int flags)
{
struct hw_perf_event *hwc = &event->hw;
if (!mipspmu)
return;
if (flags & PERF_EF_RELOAD)
WARN_ON_ONCE(!(hwc->state & PERF_HES_UPTODATE));
hwc->state = 0;
/* Set the period for the event. */
mipspmu_event_set_period(event, hwc, hwc->idx);
/* Enable the event. */
mipspmu->enable_event(hwc, hwc->idx);
}
static void mipspmu_stop(struct perf_event *event, int flags)
{
struct hw_perf_event *hwc = &event->hw;
if (!mipspmu)
return;
if (!(hwc->state & PERF_HES_STOPPED)) {
/* We are working on a local event. */
mipspmu->disable_event(hwc->idx);
barrier();
mipspmu_event_update(event, hwc, hwc->idx);
hwc->state |= PERF_HES_STOPPED | PERF_HES_UPTODATE;
}
}
static int mipspmu_add(struct perf_event *event, int flags)
{
struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
struct hw_perf_event *hwc = &event->hw;
MIPS, Perf-events: Work with the new PMU interface This is the MIPS part of the following commits by Peter Zijlstra: - a4eaf7f14675cb512d69f0c928055e73d0c6d252 perf: Rework the PMU methods Replace pmu::{enable,disable,start,stop,unthrottle} with pmu::{add,del,start,stop}, all of which take a flags argument. The new interface extends the capability to stop a counter while keeping it scheduled on the PMU. We replace the throttled state with the generic stopped state. This also allows us to efficiently stop/start counters over certain code paths (like IRQ handlers). It also allows scheduling a counter without it starting, allowing for a generic frozen state (useful for rotating stopped counters). The stopped state is implemented in two different ways, depending on how the architecture implemented the throttled state: 1) We disable the counter: a) the pmu has per-counter enable bits, we flip that b) we program a NOP event, preserving the counter state 2) We store the counter state and ignore all read/overflow events For MIPSXX, the stopped state is implemented in the way of 1.b as above. - 33696fc0d141bbbcb12f75b69608ea83282e3117 perf: Per PMU disable Changes perf_disable() into perf_pmu_disable(). - 24cd7f54a0d47e1d5b3de29e2456bfbd2d8447b7 perf: Reduce perf_disable() usage Since the current perf_disable() usage is only an optimization, remove it for now. This eases the removal of the __weak hw_perf_enable() interface. - b0a873ebbf87bf38bf70b5e39a7cadc96099fa13 perf: Register PMU implementations Simple registration interface for struct pmu, this provides the infrastructure for removing all the weak functions. - 51b0fe39549a04858001922919ab355dee9bdfcf perf: Deconstify struct pmu sed -ie 's/const struct pmu\>/struct pmu/g' `git grep -l "const struct pmu\>"` Reported-by: Wu Zhangjin <wuzhangjin@gmail.com> Acked-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@gmail.com> To: a.p.zijlstra@chello.nl To: fweisbec@gmail.com To: will.deacon@arm.com Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: wuzhangjin@gmail.com Cc: paulus@samba.org Cc: mingo@elte.hu Cc: acme@redhat.com Cc: dengcheng.zhu@gmail.com Cc: matt@console-pimps.org Cc: sshtylyov@mvista.com Cc: ddaney@caviumnetworks.com Patchwork: http://patchwork.linux-mips.org/patch/2012/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-01-21 09:19:18 +01:00
int idx;
int err = 0;
MIPS, Perf-events: Work with the new PMU interface This is the MIPS part of the following commits by Peter Zijlstra: - a4eaf7f14675cb512d69f0c928055e73d0c6d252 perf: Rework the PMU methods Replace pmu::{enable,disable,start,stop,unthrottle} with pmu::{add,del,start,stop}, all of which take a flags argument. The new interface extends the capability to stop a counter while keeping it scheduled on the PMU. We replace the throttled state with the generic stopped state. This also allows us to efficiently stop/start counters over certain code paths (like IRQ handlers). It also allows scheduling a counter without it starting, allowing for a generic frozen state (useful for rotating stopped counters). The stopped state is implemented in two different ways, depending on how the architecture implemented the throttled state: 1) We disable the counter: a) the pmu has per-counter enable bits, we flip that b) we program a NOP event, preserving the counter state 2) We store the counter state and ignore all read/overflow events For MIPSXX, the stopped state is implemented in the way of 1.b as above. - 33696fc0d141bbbcb12f75b69608ea83282e3117 perf: Per PMU disable Changes perf_disable() into perf_pmu_disable(). - 24cd7f54a0d47e1d5b3de29e2456bfbd2d8447b7 perf: Reduce perf_disable() usage Since the current perf_disable() usage is only an optimization, remove it for now. This eases the removal of the __weak hw_perf_enable() interface. - b0a873ebbf87bf38bf70b5e39a7cadc96099fa13 perf: Register PMU implementations Simple registration interface for struct pmu, this provides the infrastructure for removing all the weak functions. - 51b0fe39549a04858001922919ab355dee9bdfcf perf: Deconstify struct pmu sed -ie 's/const struct pmu\>/struct pmu/g' `git grep -l "const struct pmu\>"` Reported-by: Wu Zhangjin <wuzhangjin@gmail.com> Acked-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@gmail.com> To: a.p.zijlstra@chello.nl To: fweisbec@gmail.com To: will.deacon@arm.com Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: wuzhangjin@gmail.com Cc: paulus@samba.org Cc: mingo@elte.hu Cc: acme@redhat.com Cc: dengcheng.zhu@gmail.com Cc: matt@console-pimps.org Cc: sshtylyov@mvista.com Cc: ddaney@caviumnetworks.com Patchwork: http://patchwork.linux-mips.org/patch/2012/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-01-21 09:19:18 +01:00
perf_pmu_disable(event->pmu);
MIPS, Perf-events: Work with the new PMU interface This is the MIPS part of the following commits by Peter Zijlstra: - a4eaf7f14675cb512d69f0c928055e73d0c6d252 perf: Rework the PMU methods Replace pmu::{enable,disable,start,stop,unthrottle} with pmu::{add,del,start,stop}, all of which take a flags argument. The new interface extends the capability to stop a counter while keeping it scheduled on the PMU. We replace the throttled state with the generic stopped state. This also allows us to efficiently stop/start counters over certain code paths (like IRQ handlers). It also allows scheduling a counter without it starting, allowing for a generic frozen state (useful for rotating stopped counters). The stopped state is implemented in two different ways, depending on how the architecture implemented the throttled state: 1) We disable the counter: a) the pmu has per-counter enable bits, we flip that b) we program a NOP event, preserving the counter state 2) We store the counter state and ignore all read/overflow events For MIPSXX, the stopped state is implemented in the way of 1.b as above. - 33696fc0d141bbbcb12f75b69608ea83282e3117 perf: Per PMU disable Changes perf_disable() into perf_pmu_disable(). - 24cd7f54a0d47e1d5b3de29e2456bfbd2d8447b7 perf: Reduce perf_disable() usage Since the current perf_disable() usage is only an optimization, remove it for now. This eases the removal of the __weak hw_perf_enable() interface. - b0a873ebbf87bf38bf70b5e39a7cadc96099fa13 perf: Register PMU implementations Simple registration interface for struct pmu, this provides the infrastructure for removing all the weak functions. - 51b0fe39549a04858001922919ab355dee9bdfcf perf: Deconstify struct pmu sed -ie 's/const struct pmu\>/struct pmu/g' `git grep -l "const struct pmu\>"` Reported-by: Wu Zhangjin <wuzhangjin@gmail.com> Acked-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@gmail.com> To: a.p.zijlstra@chello.nl To: fweisbec@gmail.com To: will.deacon@arm.com Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: wuzhangjin@gmail.com Cc: paulus@samba.org Cc: mingo@elte.hu Cc: acme@redhat.com Cc: dengcheng.zhu@gmail.com Cc: matt@console-pimps.org Cc: sshtylyov@mvista.com Cc: ddaney@caviumnetworks.com Patchwork: http://patchwork.linux-mips.org/patch/2012/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-01-21 09:19:18 +01:00
/* To look for a free counter for this event. */
idx = mipspmu->alloc_counter(cpuc, hwc);
if (idx < 0) {
err = idx;
goto out;
}
MIPS, Perf-events: Work with the new PMU interface This is the MIPS part of the following commits by Peter Zijlstra: - a4eaf7f14675cb512d69f0c928055e73d0c6d252 perf: Rework the PMU methods Replace pmu::{enable,disable,start,stop,unthrottle} with pmu::{add,del,start,stop}, all of which take a flags argument. The new interface extends the capability to stop a counter while keeping it scheduled on the PMU. We replace the throttled state with the generic stopped state. This also allows us to efficiently stop/start counters over certain code paths (like IRQ handlers). It also allows scheduling a counter without it starting, allowing for a generic frozen state (useful for rotating stopped counters). The stopped state is implemented in two different ways, depending on how the architecture implemented the throttled state: 1) We disable the counter: a) the pmu has per-counter enable bits, we flip that b) we program a NOP event, preserving the counter state 2) We store the counter state and ignore all read/overflow events For MIPSXX, the stopped state is implemented in the way of 1.b as above. - 33696fc0d141bbbcb12f75b69608ea83282e3117 perf: Per PMU disable Changes perf_disable() into perf_pmu_disable(). - 24cd7f54a0d47e1d5b3de29e2456bfbd2d8447b7 perf: Reduce perf_disable() usage Since the current perf_disable() usage is only an optimization, remove it for now. This eases the removal of the __weak hw_perf_enable() interface. - b0a873ebbf87bf38bf70b5e39a7cadc96099fa13 perf: Register PMU implementations Simple registration interface for struct pmu, this provides the infrastructure for removing all the weak functions. - 51b0fe39549a04858001922919ab355dee9bdfcf perf: Deconstify struct pmu sed -ie 's/const struct pmu\>/struct pmu/g' `git grep -l "const struct pmu\>"` Reported-by: Wu Zhangjin <wuzhangjin@gmail.com> Acked-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@gmail.com> To: a.p.zijlstra@chello.nl To: fweisbec@gmail.com To: will.deacon@arm.com Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: wuzhangjin@gmail.com Cc: paulus@samba.org Cc: mingo@elte.hu Cc: acme@redhat.com Cc: dengcheng.zhu@gmail.com Cc: matt@console-pimps.org Cc: sshtylyov@mvista.com Cc: ddaney@caviumnetworks.com Patchwork: http://patchwork.linux-mips.org/patch/2012/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-01-21 09:19:18 +01:00
/*
* If there is an event in the counter we are going to use then
* make sure it is disabled.
*/
event->hw.idx = idx;
mipspmu->disable_event(idx);
MIPS, Perf-events: Work with the new PMU interface This is the MIPS part of the following commits by Peter Zijlstra: - a4eaf7f14675cb512d69f0c928055e73d0c6d252 perf: Rework the PMU methods Replace pmu::{enable,disable,start,stop,unthrottle} with pmu::{add,del,start,stop}, all of which take a flags argument. The new interface extends the capability to stop a counter while keeping it scheduled on the PMU. We replace the throttled state with the generic stopped state. This also allows us to efficiently stop/start counters over certain code paths (like IRQ handlers). It also allows scheduling a counter without it starting, allowing for a generic frozen state (useful for rotating stopped counters). The stopped state is implemented in two different ways, depending on how the architecture implemented the throttled state: 1) We disable the counter: a) the pmu has per-counter enable bits, we flip that b) we program a NOP event, preserving the counter state 2) We store the counter state and ignore all read/overflow events For MIPSXX, the stopped state is implemented in the way of 1.b as above. - 33696fc0d141bbbcb12f75b69608ea83282e3117 perf: Per PMU disable Changes perf_disable() into perf_pmu_disable(). - 24cd7f54a0d47e1d5b3de29e2456bfbd2d8447b7 perf: Reduce perf_disable() usage Since the current perf_disable() usage is only an optimization, remove it for now. This eases the removal of the __weak hw_perf_enable() interface. - b0a873ebbf87bf38bf70b5e39a7cadc96099fa13 perf: Register PMU implementations Simple registration interface for struct pmu, this provides the infrastructure for removing all the weak functions. - 51b0fe39549a04858001922919ab355dee9bdfcf perf: Deconstify struct pmu sed -ie 's/const struct pmu\>/struct pmu/g' `git grep -l "const struct pmu\>"` Reported-by: Wu Zhangjin <wuzhangjin@gmail.com> Acked-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@gmail.com> To: a.p.zijlstra@chello.nl To: fweisbec@gmail.com To: will.deacon@arm.com Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: wuzhangjin@gmail.com Cc: paulus@samba.org Cc: mingo@elte.hu Cc: acme@redhat.com Cc: dengcheng.zhu@gmail.com Cc: matt@console-pimps.org Cc: sshtylyov@mvista.com Cc: ddaney@caviumnetworks.com Patchwork: http://patchwork.linux-mips.org/patch/2012/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-01-21 09:19:18 +01:00
cpuc->events[idx] = event;
MIPS, Perf-events: Work with the new PMU interface This is the MIPS part of the following commits by Peter Zijlstra: - a4eaf7f14675cb512d69f0c928055e73d0c6d252 perf: Rework the PMU methods Replace pmu::{enable,disable,start,stop,unthrottle} with pmu::{add,del,start,stop}, all of which take a flags argument. The new interface extends the capability to stop a counter while keeping it scheduled on the PMU. We replace the throttled state with the generic stopped state. This also allows us to efficiently stop/start counters over certain code paths (like IRQ handlers). It also allows scheduling a counter without it starting, allowing for a generic frozen state (useful for rotating stopped counters). The stopped state is implemented in two different ways, depending on how the architecture implemented the throttled state: 1) We disable the counter: a) the pmu has per-counter enable bits, we flip that b) we program a NOP event, preserving the counter state 2) We store the counter state and ignore all read/overflow events For MIPSXX, the stopped state is implemented in the way of 1.b as above. - 33696fc0d141bbbcb12f75b69608ea83282e3117 perf: Per PMU disable Changes perf_disable() into perf_pmu_disable(). - 24cd7f54a0d47e1d5b3de29e2456bfbd2d8447b7 perf: Reduce perf_disable() usage Since the current perf_disable() usage is only an optimization, remove it for now. This eases the removal of the __weak hw_perf_enable() interface. - b0a873ebbf87bf38bf70b5e39a7cadc96099fa13 perf: Register PMU implementations Simple registration interface for struct pmu, this provides the infrastructure for removing all the weak functions. - 51b0fe39549a04858001922919ab355dee9bdfcf perf: Deconstify struct pmu sed -ie 's/const struct pmu\>/struct pmu/g' `git grep -l "const struct pmu\>"` Reported-by: Wu Zhangjin <wuzhangjin@gmail.com> Acked-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@gmail.com> To: a.p.zijlstra@chello.nl To: fweisbec@gmail.com To: will.deacon@arm.com Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: wuzhangjin@gmail.com Cc: paulus@samba.org Cc: mingo@elte.hu Cc: acme@redhat.com Cc: dengcheng.zhu@gmail.com Cc: matt@console-pimps.org Cc: sshtylyov@mvista.com Cc: ddaney@caviumnetworks.com Patchwork: http://patchwork.linux-mips.org/patch/2012/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-01-21 09:19:18 +01:00
hwc->state = PERF_HES_STOPPED | PERF_HES_UPTODATE;
if (flags & PERF_EF_START)
mipspmu_start(event, PERF_EF_RELOAD);
MIPS, Perf-events: Work with the new PMU interface This is the MIPS part of the following commits by Peter Zijlstra: - a4eaf7f14675cb512d69f0c928055e73d0c6d252 perf: Rework the PMU methods Replace pmu::{enable,disable,start,stop,unthrottle} with pmu::{add,del,start,stop}, all of which take a flags argument. The new interface extends the capability to stop a counter while keeping it scheduled on the PMU. We replace the throttled state with the generic stopped state. This also allows us to efficiently stop/start counters over certain code paths (like IRQ handlers). It also allows scheduling a counter without it starting, allowing for a generic frozen state (useful for rotating stopped counters). The stopped state is implemented in two different ways, depending on how the architecture implemented the throttled state: 1) We disable the counter: a) the pmu has per-counter enable bits, we flip that b) we program a NOP event, preserving the counter state 2) We store the counter state and ignore all read/overflow events For MIPSXX, the stopped state is implemented in the way of 1.b as above. - 33696fc0d141bbbcb12f75b69608ea83282e3117 perf: Per PMU disable Changes perf_disable() into perf_pmu_disable(). - 24cd7f54a0d47e1d5b3de29e2456bfbd2d8447b7 perf: Reduce perf_disable() usage Since the current perf_disable() usage is only an optimization, remove it for now. This eases the removal of the __weak hw_perf_enable() interface. - b0a873ebbf87bf38bf70b5e39a7cadc96099fa13 perf: Register PMU implementations Simple registration interface for struct pmu, this provides the infrastructure for removing all the weak functions. - 51b0fe39549a04858001922919ab355dee9bdfcf perf: Deconstify struct pmu sed -ie 's/const struct pmu\>/struct pmu/g' `git grep -l "const struct pmu\>"` Reported-by: Wu Zhangjin <wuzhangjin@gmail.com> Acked-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@gmail.com> To: a.p.zijlstra@chello.nl To: fweisbec@gmail.com To: will.deacon@arm.com Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: wuzhangjin@gmail.com Cc: paulus@samba.org Cc: mingo@elte.hu Cc: acme@redhat.com Cc: dengcheng.zhu@gmail.com Cc: matt@console-pimps.org Cc: sshtylyov@mvista.com Cc: ddaney@caviumnetworks.com Patchwork: http://patchwork.linux-mips.org/patch/2012/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-01-21 09:19:18 +01:00
/* Propagate our changes to the userspace mapping. */
perf_event_update_userpage(event);
MIPS, Perf-events: Work with the new PMU interface This is the MIPS part of the following commits by Peter Zijlstra: - a4eaf7f14675cb512d69f0c928055e73d0c6d252 perf: Rework the PMU methods Replace pmu::{enable,disable,start,stop,unthrottle} with pmu::{add,del,start,stop}, all of which take a flags argument. The new interface extends the capability to stop a counter while keeping it scheduled on the PMU. We replace the throttled state with the generic stopped state. This also allows us to efficiently stop/start counters over certain code paths (like IRQ handlers). It also allows scheduling a counter without it starting, allowing for a generic frozen state (useful for rotating stopped counters). The stopped state is implemented in two different ways, depending on how the architecture implemented the throttled state: 1) We disable the counter: a) the pmu has per-counter enable bits, we flip that b) we program a NOP event, preserving the counter state 2) We store the counter state and ignore all read/overflow events For MIPSXX, the stopped state is implemented in the way of 1.b as above. - 33696fc0d141bbbcb12f75b69608ea83282e3117 perf: Per PMU disable Changes perf_disable() into perf_pmu_disable(). - 24cd7f54a0d47e1d5b3de29e2456bfbd2d8447b7 perf: Reduce perf_disable() usage Since the current perf_disable() usage is only an optimization, remove it for now. This eases the removal of the __weak hw_perf_enable() interface. - b0a873ebbf87bf38bf70b5e39a7cadc96099fa13 perf: Register PMU implementations Simple registration interface for struct pmu, this provides the infrastructure for removing all the weak functions. - 51b0fe39549a04858001922919ab355dee9bdfcf perf: Deconstify struct pmu sed -ie 's/const struct pmu\>/struct pmu/g' `git grep -l "const struct pmu\>"` Reported-by: Wu Zhangjin <wuzhangjin@gmail.com> Acked-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@gmail.com> To: a.p.zijlstra@chello.nl To: fweisbec@gmail.com To: will.deacon@arm.com Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: wuzhangjin@gmail.com Cc: paulus@samba.org Cc: mingo@elte.hu Cc: acme@redhat.com Cc: dengcheng.zhu@gmail.com Cc: matt@console-pimps.org Cc: sshtylyov@mvista.com Cc: ddaney@caviumnetworks.com Patchwork: http://patchwork.linux-mips.org/patch/2012/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-01-21 09:19:18 +01:00
out:
perf_pmu_enable(event->pmu);
return err;
}
MIPS, Perf-events: Work with the new PMU interface This is the MIPS part of the following commits by Peter Zijlstra: - a4eaf7f14675cb512d69f0c928055e73d0c6d252 perf: Rework the PMU methods Replace pmu::{enable,disable,start,stop,unthrottle} with pmu::{add,del,start,stop}, all of which take a flags argument. The new interface extends the capability to stop a counter while keeping it scheduled on the PMU. We replace the throttled state with the generic stopped state. This also allows us to efficiently stop/start counters over certain code paths (like IRQ handlers). It also allows scheduling a counter without it starting, allowing for a generic frozen state (useful for rotating stopped counters). The stopped state is implemented in two different ways, depending on how the architecture implemented the throttled state: 1) We disable the counter: a) the pmu has per-counter enable bits, we flip that b) we program a NOP event, preserving the counter state 2) We store the counter state and ignore all read/overflow events For MIPSXX, the stopped state is implemented in the way of 1.b as above. - 33696fc0d141bbbcb12f75b69608ea83282e3117 perf: Per PMU disable Changes perf_disable() into perf_pmu_disable(). - 24cd7f54a0d47e1d5b3de29e2456bfbd2d8447b7 perf: Reduce perf_disable() usage Since the current perf_disable() usage is only an optimization, remove it for now. This eases the removal of the __weak hw_perf_enable() interface. - b0a873ebbf87bf38bf70b5e39a7cadc96099fa13 perf: Register PMU implementations Simple registration interface for struct pmu, this provides the infrastructure for removing all the weak functions. - 51b0fe39549a04858001922919ab355dee9bdfcf perf: Deconstify struct pmu sed -ie 's/const struct pmu\>/struct pmu/g' `git grep -l "const struct pmu\>"` Reported-by: Wu Zhangjin <wuzhangjin@gmail.com> Acked-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@gmail.com> To: a.p.zijlstra@chello.nl To: fweisbec@gmail.com To: will.deacon@arm.com Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: wuzhangjin@gmail.com Cc: paulus@samba.org Cc: mingo@elte.hu Cc: acme@redhat.com Cc: dengcheng.zhu@gmail.com Cc: matt@console-pimps.org Cc: sshtylyov@mvista.com Cc: ddaney@caviumnetworks.com Patchwork: http://patchwork.linux-mips.org/patch/2012/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-01-21 09:19:18 +01:00
static void mipspmu_del(struct perf_event *event, int flags)
{
MIPS, Perf-events: Work with the new PMU interface This is the MIPS part of the following commits by Peter Zijlstra: - a4eaf7f14675cb512d69f0c928055e73d0c6d252 perf: Rework the PMU methods Replace pmu::{enable,disable,start,stop,unthrottle} with pmu::{add,del,start,stop}, all of which take a flags argument. The new interface extends the capability to stop a counter while keeping it scheduled on the PMU. We replace the throttled state with the generic stopped state. This also allows us to efficiently stop/start counters over certain code paths (like IRQ handlers). It also allows scheduling a counter without it starting, allowing for a generic frozen state (useful for rotating stopped counters). The stopped state is implemented in two different ways, depending on how the architecture implemented the throttled state: 1) We disable the counter: a) the pmu has per-counter enable bits, we flip that b) we program a NOP event, preserving the counter state 2) We store the counter state and ignore all read/overflow events For MIPSXX, the stopped state is implemented in the way of 1.b as above. - 33696fc0d141bbbcb12f75b69608ea83282e3117 perf: Per PMU disable Changes perf_disable() into perf_pmu_disable(). - 24cd7f54a0d47e1d5b3de29e2456bfbd2d8447b7 perf: Reduce perf_disable() usage Since the current perf_disable() usage is only an optimization, remove it for now. This eases the removal of the __weak hw_perf_enable() interface. - b0a873ebbf87bf38bf70b5e39a7cadc96099fa13 perf: Register PMU implementations Simple registration interface for struct pmu, this provides the infrastructure for removing all the weak functions. - 51b0fe39549a04858001922919ab355dee9bdfcf perf: Deconstify struct pmu sed -ie 's/const struct pmu\>/struct pmu/g' `git grep -l "const struct pmu\>"` Reported-by: Wu Zhangjin <wuzhangjin@gmail.com> Acked-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@gmail.com> To: a.p.zijlstra@chello.nl To: fweisbec@gmail.com To: will.deacon@arm.com Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: wuzhangjin@gmail.com Cc: paulus@samba.org Cc: mingo@elte.hu Cc: acme@redhat.com Cc: dengcheng.zhu@gmail.com Cc: matt@console-pimps.org Cc: sshtylyov@mvista.com Cc: ddaney@caviumnetworks.com Patchwork: http://patchwork.linux-mips.org/patch/2012/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-01-21 09:19:18 +01:00
struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
struct hw_perf_event *hwc = &event->hw;
MIPS, Perf-events: Work with the new PMU interface This is the MIPS part of the following commits by Peter Zijlstra: - a4eaf7f14675cb512d69f0c928055e73d0c6d252 perf: Rework the PMU methods Replace pmu::{enable,disable,start,stop,unthrottle} with pmu::{add,del,start,stop}, all of which take a flags argument. The new interface extends the capability to stop a counter while keeping it scheduled on the PMU. We replace the throttled state with the generic stopped state. This also allows us to efficiently stop/start counters over certain code paths (like IRQ handlers). It also allows scheduling a counter without it starting, allowing for a generic frozen state (useful for rotating stopped counters). The stopped state is implemented in two different ways, depending on how the architecture implemented the throttled state: 1) We disable the counter: a) the pmu has per-counter enable bits, we flip that b) we program a NOP event, preserving the counter state 2) We store the counter state and ignore all read/overflow events For MIPSXX, the stopped state is implemented in the way of 1.b as above. - 33696fc0d141bbbcb12f75b69608ea83282e3117 perf: Per PMU disable Changes perf_disable() into perf_pmu_disable(). - 24cd7f54a0d47e1d5b3de29e2456bfbd2d8447b7 perf: Reduce perf_disable() usage Since the current perf_disable() usage is only an optimization, remove it for now. This eases the removal of the __weak hw_perf_enable() interface. - b0a873ebbf87bf38bf70b5e39a7cadc96099fa13 perf: Register PMU implementations Simple registration interface for struct pmu, this provides the infrastructure for removing all the weak functions. - 51b0fe39549a04858001922919ab355dee9bdfcf perf: Deconstify struct pmu sed -ie 's/const struct pmu\>/struct pmu/g' `git grep -l "const struct pmu\>"` Reported-by: Wu Zhangjin <wuzhangjin@gmail.com> Acked-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@gmail.com> To: a.p.zijlstra@chello.nl To: fweisbec@gmail.com To: will.deacon@arm.com Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: wuzhangjin@gmail.com Cc: paulus@samba.org Cc: mingo@elte.hu Cc: acme@redhat.com Cc: dengcheng.zhu@gmail.com Cc: matt@console-pimps.org Cc: sshtylyov@mvista.com Cc: ddaney@caviumnetworks.com Patchwork: http://patchwork.linux-mips.org/patch/2012/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-01-21 09:19:18 +01:00
int idx = hwc->idx;
MIPS, Perf-events: Work with the new PMU interface This is the MIPS part of the following commits by Peter Zijlstra: - a4eaf7f14675cb512d69f0c928055e73d0c6d252 perf: Rework the PMU methods Replace pmu::{enable,disable,start,stop,unthrottle} with pmu::{add,del,start,stop}, all of which take a flags argument. The new interface extends the capability to stop a counter while keeping it scheduled on the PMU. We replace the throttled state with the generic stopped state. This also allows us to efficiently stop/start counters over certain code paths (like IRQ handlers). It also allows scheduling a counter without it starting, allowing for a generic frozen state (useful for rotating stopped counters). The stopped state is implemented in two different ways, depending on how the architecture implemented the throttled state: 1) We disable the counter: a) the pmu has per-counter enable bits, we flip that b) we program a NOP event, preserving the counter state 2) We store the counter state and ignore all read/overflow events For MIPSXX, the stopped state is implemented in the way of 1.b as above. - 33696fc0d141bbbcb12f75b69608ea83282e3117 perf: Per PMU disable Changes perf_disable() into perf_pmu_disable(). - 24cd7f54a0d47e1d5b3de29e2456bfbd2d8447b7 perf: Reduce perf_disable() usage Since the current perf_disable() usage is only an optimization, remove it for now. This eases the removal of the __weak hw_perf_enable() interface. - b0a873ebbf87bf38bf70b5e39a7cadc96099fa13 perf: Register PMU implementations Simple registration interface for struct pmu, this provides the infrastructure for removing all the weak functions. - 51b0fe39549a04858001922919ab355dee9bdfcf perf: Deconstify struct pmu sed -ie 's/const struct pmu\>/struct pmu/g' `git grep -l "const struct pmu\>"` Reported-by: Wu Zhangjin <wuzhangjin@gmail.com> Acked-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@gmail.com> To: a.p.zijlstra@chello.nl To: fweisbec@gmail.com To: will.deacon@arm.com Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: wuzhangjin@gmail.com Cc: paulus@samba.org Cc: mingo@elte.hu Cc: acme@redhat.com Cc: dengcheng.zhu@gmail.com Cc: matt@console-pimps.org Cc: sshtylyov@mvista.com Cc: ddaney@caviumnetworks.com Patchwork: http://patchwork.linux-mips.org/patch/2012/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-01-21 09:19:18 +01:00
WARN_ON(idx < 0 || idx >= mipspmu->num_counters);
mipspmu_stop(event, PERF_EF_UPDATE);
cpuc->events[idx] = NULL;
clear_bit(idx, cpuc->used_mask);
perf_event_update_userpage(event);
}
static void mipspmu_read(struct perf_event *event)
{
struct hw_perf_event *hwc = &event->hw;
/* Don't read disabled counters! */
if (hwc->idx < 0)
return;
mipspmu_event_update(event, hwc, hwc->idx);
}
MIPS, Perf-events: Work with the new PMU interface This is the MIPS part of the following commits by Peter Zijlstra: - a4eaf7f14675cb512d69f0c928055e73d0c6d252 perf: Rework the PMU methods Replace pmu::{enable,disable,start,stop,unthrottle} with pmu::{add,del,start,stop}, all of which take a flags argument. The new interface extends the capability to stop a counter while keeping it scheduled on the PMU. We replace the throttled state with the generic stopped state. This also allows us to efficiently stop/start counters over certain code paths (like IRQ handlers). It also allows scheduling a counter without it starting, allowing for a generic frozen state (useful for rotating stopped counters). The stopped state is implemented in two different ways, depending on how the architecture implemented the throttled state: 1) We disable the counter: a) the pmu has per-counter enable bits, we flip that b) we program a NOP event, preserving the counter state 2) We store the counter state and ignore all read/overflow events For MIPSXX, the stopped state is implemented in the way of 1.b as above. - 33696fc0d141bbbcb12f75b69608ea83282e3117 perf: Per PMU disable Changes perf_disable() into perf_pmu_disable(). - 24cd7f54a0d47e1d5b3de29e2456bfbd2d8447b7 perf: Reduce perf_disable() usage Since the current perf_disable() usage is only an optimization, remove it for now. This eases the removal of the __weak hw_perf_enable() interface. - b0a873ebbf87bf38bf70b5e39a7cadc96099fa13 perf: Register PMU implementations Simple registration interface for struct pmu, this provides the infrastructure for removing all the weak functions. - 51b0fe39549a04858001922919ab355dee9bdfcf perf: Deconstify struct pmu sed -ie 's/const struct pmu\>/struct pmu/g' `git grep -l "const struct pmu\>"` Reported-by: Wu Zhangjin <wuzhangjin@gmail.com> Acked-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@gmail.com> To: a.p.zijlstra@chello.nl To: fweisbec@gmail.com To: will.deacon@arm.com Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: wuzhangjin@gmail.com Cc: paulus@samba.org Cc: mingo@elte.hu Cc: acme@redhat.com Cc: dengcheng.zhu@gmail.com Cc: matt@console-pimps.org Cc: sshtylyov@mvista.com Cc: ddaney@caviumnetworks.com Patchwork: http://patchwork.linux-mips.org/patch/2012/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-01-21 09:19:18 +01:00
static void mipspmu_enable(struct pmu *pmu)
{
if (mipspmu)
mipspmu->start();
}
static void mipspmu_disable(struct pmu *pmu)
{
if (mipspmu)
mipspmu->stop();
}
static atomic_t active_events = ATOMIC_INIT(0);
static DEFINE_MUTEX(pmu_reserve_mutex);
static int (*save_perf_irq)(void);
static int mipspmu_get_irq(void)
{
int err;
if (mipspmu->irq >= 0) {
/* Request my own irq handler. */
err = request_irq(mipspmu->irq, mipspmu->handle_irq,
IRQF_DISABLED | IRQF_NOBALANCING,
"mips_perf_pmu", NULL);
if (err) {
pr_warning("Unable to request IRQ%d for MIPS "
"performance counters!\n", mipspmu->irq);
}
} else if (cp0_perfcount_irq < 0) {
/*
* We are sharing the irq number with the timer interrupt.
*/
save_perf_irq = perf_irq;
perf_irq = mipspmu->handle_shared_irq;
err = 0;
} else {
pr_warning("The platform hasn't properly defined its "
"interrupt controller.\n");
err = -ENOENT;
}
return err;
}
static void mipspmu_free_irq(void)
{
if (mipspmu->irq >= 0)
free_irq(mipspmu->irq, NULL);
else if (cp0_perfcount_irq < 0)
perf_irq = save_perf_irq;
}
MIPS, Perf-events: Work with the new PMU interface This is the MIPS part of the following commits by Peter Zijlstra: - a4eaf7f14675cb512d69f0c928055e73d0c6d252 perf: Rework the PMU methods Replace pmu::{enable,disable,start,stop,unthrottle} with pmu::{add,del,start,stop}, all of which take a flags argument. The new interface extends the capability to stop a counter while keeping it scheduled on the PMU. We replace the throttled state with the generic stopped state. This also allows us to efficiently stop/start counters over certain code paths (like IRQ handlers). It also allows scheduling a counter without it starting, allowing for a generic frozen state (useful for rotating stopped counters). The stopped state is implemented in two different ways, depending on how the architecture implemented the throttled state: 1) We disable the counter: a) the pmu has per-counter enable bits, we flip that b) we program a NOP event, preserving the counter state 2) We store the counter state and ignore all read/overflow events For MIPSXX, the stopped state is implemented in the way of 1.b as above. - 33696fc0d141bbbcb12f75b69608ea83282e3117 perf: Per PMU disable Changes perf_disable() into perf_pmu_disable(). - 24cd7f54a0d47e1d5b3de29e2456bfbd2d8447b7 perf: Reduce perf_disable() usage Since the current perf_disable() usage is only an optimization, remove it for now. This eases the removal of the __weak hw_perf_enable() interface. - b0a873ebbf87bf38bf70b5e39a7cadc96099fa13 perf: Register PMU implementations Simple registration interface for struct pmu, this provides the infrastructure for removing all the weak functions. - 51b0fe39549a04858001922919ab355dee9bdfcf perf: Deconstify struct pmu sed -ie 's/const struct pmu\>/struct pmu/g' `git grep -l "const struct pmu\>"` Reported-by: Wu Zhangjin <wuzhangjin@gmail.com> Acked-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@gmail.com> To: a.p.zijlstra@chello.nl To: fweisbec@gmail.com To: will.deacon@arm.com Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: wuzhangjin@gmail.com Cc: paulus@samba.org Cc: mingo@elte.hu Cc: acme@redhat.com Cc: dengcheng.zhu@gmail.com Cc: matt@console-pimps.org Cc: sshtylyov@mvista.com Cc: ddaney@caviumnetworks.com Patchwork: http://patchwork.linux-mips.org/patch/2012/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-01-21 09:19:18 +01:00
/*
* mipsxx/rm9000/loongson2 have different performance counters, they have
* specific low-level init routines.
*/
static void reset_counters(void *arg);
static int __hw_perf_event_init(struct perf_event *event);
static void hw_perf_event_destroy(struct perf_event *event)
{
if (atomic_dec_and_mutex_lock(&active_events,
&pmu_reserve_mutex)) {
/*
* We must not call the destroy function with interrupts
* disabled.
*/
on_each_cpu(reset_counters,
(void *)(long)mipspmu->num_counters, 1);
mipspmu_free_irq();
mutex_unlock(&pmu_reserve_mutex);
}
}
static int mipspmu_event_init(struct perf_event *event)
{
int err = 0;
switch (event->attr.type) {
case PERF_TYPE_RAW:
case PERF_TYPE_HARDWARE:
case PERF_TYPE_HW_CACHE:
break;
default:
return -ENOENT;
}
if (!mipspmu || event->cpu >= nr_cpumask_bits ||
(event->cpu >= 0 && !cpu_online(event->cpu)))
return -ENODEV;
if (!atomic_inc_not_zero(&active_events)) {
if (atomic_read(&active_events) > MIPS_MAX_HWEVENTS) {
atomic_dec(&active_events);
return -ENOSPC;
}
mutex_lock(&pmu_reserve_mutex);
if (atomic_read(&active_events) == 0)
err = mipspmu_get_irq();
if (!err)
atomic_inc(&active_events);
mutex_unlock(&pmu_reserve_mutex);
}
if (err)
return err;
err = __hw_perf_event_init(event);
if (err)
hw_perf_event_destroy(event);
return err;
}
static struct pmu pmu = {
.pmu_enable = mipspmu_enable,
.pmu_disable = mipspmu_disable,
.event_init = mipspmu_event_init,
.add = mipspmu_add,
.del = mipspmu_del,
.start = mipspmu_start,
.stop = mipspmu_stop,
.read = mipspmu_read,
};
static inline unsigned int
mipspmu_perf_event_encode(const struct mips_perf_event *pev)
{
/*
* Top 8 bits for range, next 16 bits for cntr_mask, lowest 8 bits for
* event_id.
*/
#ifdef CONFIG_MIPS_MT_SMP
return ((unsigned int)pev->range << 24) |
(pev->cntr_mask & 0xffff00) |
(pev->event_id & 0xff);
#else
return (pev->cntr_mask & 0xffff00) |
(pev->event_id & 0xff);
#endif
}
static const struct mips_perf_event *
mipspmu_map_general_event(int idx)
{
const struct mips_perf_event *pev;
pev = ((*mipspmu->general_event_map)[idx].event_id ==
UNSUPPORTED_PERF_EVENT_ID ? ERR_PTR(-EOPNOTSUPP) :
&(*mipspmu->general_event_map)[idx]);
return pev;
}
static const struct mips_perf_event *
mipspmu_map_cache_event(u64 config)
{
unsigned int cache_type, cache_op, cache_result;
const struct mips_perf_event *pev;
cache_type = (config >> 0) & 0xff;
if (cache_type >= PERF_COUNT_HW_CACHE_MAX)
return ERR_PTR(-EINVAL);
cache_op = (config >> 8) & 0xff;
if (cache_op >= PERF_COUNT_HW_CACHE_OP_MAX)
return ERR_PTR(-EINVAL);
cache_result = (config >> 16) & 0xff;
if (cache_result >= PERF_COUNT_HW_CACHE_RESULT_MAX)
return ERR_PTR(-EINVAL);
pev = &((*mipspmu->cache_event_map)
[cache_type]
[cache_op]
[cache_result]);
if (pev->event_id == UNSUPPORTED_PERF_EVENT_ID)
return ERR_PTR(-EOPNOTSUPP);
return pev;
}
static int validate_event(struct cpu_hw_events *cpuc,
struct perf_event *event)
{
struct hw_perf_event fake_hwc = event->hw;
/* Allow mixed event group. So return 1 to pass validation. */
if (event->pmu != &pmu || event->state <= PERF_EVENT_STATE_OFF)
return 1;
return mipspmu->alloc_counter(cpuc, &fake_hwc) >= 0;
}
static int validate_group(struct perf_event *event)
{
struct perf_event *sibling, *leader = event->group_leader;
struct cpu_hw_events fake_cpuc;
memset(&fake_cpuc, 0, sizeof(fake_cpuc));
if (!validate_event(&fake_cpuc, leader))
return -ENOSPC;
list_for_each_entry(sibling, &leader->sibling_list, group_entry) {
if (!validate_event(&fake_cpuc, sibling))
return -ENOSPC;
}
if (!validate_event(&fake_cpuc, event))
return -ENOSPC;
return 0;
}
/* This is needed by specific irq handlers in perf_event_*.c */
static void
handle_associated_event(struct cpu_hw_events *cpuc,
int idx, struct perf_sample_data *data, struct pt_regs *regs)
{
struct perf_event *event = cpuc->events[idx];
struct hw_perf_event *hwc = &event->hw;
mipspmu_event_update(event, hwc, idx);
data->period = event->hw.last_period;
if (!mipspmu_event_set_period(event, hwc, idx))
return;
if (perf_event_overflow(event, 0, data, regs))
mipspmu->disable_event(idx);
}
MIPS: Add support for hardware performance events (mipsxx) This patch adds the mipsxx Perf-events support based on the skeleton. Generic hardware events and cache events are now fully implemented for the 24K/34K/74K/1004K cores. To support other cores in mipsxx (such as R10000/SB1), the generic hardware event tables and cache event tables need to be filled out. To support other CPUs which have different PMU than mipsxx, such as RM9000 and LOONGSON2, the additional files perf_event_$cpu.c need to be created. Raw event is an important part of Perf-events. It helps the user collect performance data for events that are not listed as the generic hardware events and cache events but ARE supported by the CPU's PMU. This patch also adds this feature for mipsxx 24K/34K/74K/1004K. For how to use it, please refer to processor core software user's manual and the comments for mipsxx_pmu_map_raw_event() for more details. Please note that this is a "precise" implementation, which means the kernel will check whether the requested raw events are supported by this CPU and which hardware counters can be assigned for them. To test the functionality of Perf-event, you may want to compile the tool "perf" for your MIPS platform. You can refer to the following URL: http://www.linux-mips.org/archives/linux-mips/2010-10/msg00126.html You also need to customize the CFLAGS and LDFLAGS in tools/perf/Makefile for your libs, includes, etc. In case you encounter the boot failure in SMVP kernel on multi-threading CPUs, you may take a look at: http://www.linux-mips.org/git?p=linux-mti.git;a=commitdiff;h=5460815027d802697b879644c74f0e8365254020 Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@gmail.com> To: linux-mips@linux-mips.org Cc: a.p.zijlstra@chello.nl Cc: paulus@samba.org Cc: mingo@elte.hu Cc: acme@redhat.com Cc: jamie.iles@picochip.com Cc: ddaney@caviumnetworks.com Cc: matt@console-pimps.org Patchwork: https://patchwork.linux-mips.org/patch/1689/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> create mode 100644 arch/mips/kernel/perf_event_mipsxx.c
2010-10-12 13:37:24 +02:00
#include "perf_event_mipsxx.c"
/* Callchain handling code. */
/*
* Leave userspace callchain empty for now. When we find a way to trace
* the user stack callchains, we add here.
*/
MIPS, Perf-events: Work with the new callchain interface This is the MIPS part of the following commits by Frederic Weisbecker: - f72c1a931e311bb7780fee19e41a89ac42cab50e perf: Factorize callchain context handling Store the kernel and user contexts from the generic layer instead of archs, this gathers some repetitive code. - 56962b4449af34070bb1994621ef4f0265eed4d8 perf: Generalize some arch callchain code - Most archs use one callchain buffer per cpu, except x86 that needs to deal with NMIs. Provide a default perf_callchain_buffer() implementation that x86 overrides. - Centralize all the kernel/user regs handling and invoke new arch handlers from there: perf_callchain_user() / perf_callchain_kernel() That avoid all the user_mode(), current->mm checks and so... - Invert some parameters in perf_callchain_*() helpers: entry to the left, regs to the right, following the traditional (dst, src). - 70791ce9ba68a5921c9905ef05d23f62a90bc10c perf: Generalize callchain_store() callchain_store() is the same on every archs, inline it in perf_event.h and rename it to perf_callchain_store() to avoid any collision. This removes repetitive code. - c1a65932fd7216fdc9a0db8bbffe1d47842f862c perf: Drop unappropriate tests on arch callchains Drop the TASK_RUNNING test on user tasks for callchains as this check doesn't seem to make any sense. Also remove the tests for !current that is not supposed to happen and current->pid as this should be handled at the generic level, with exclude_idle attribute. Reported-by: Wu Zhangjin <wuzhangjin@gmail.com> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Acked-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@gmail.com> To: a.p.zijlstra@chello.nl To: will.deacon@arm.com Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: paulus@samba.org Cc: mingo@elte.hu Cc: acme@redhat.com Cc: dengcheng.zhu@gmail.com Cc: matt@console-pimps.org Cc: sshtylyov@mvista.com Patchwork: http://patchwork.linux-mips.org/patch/2014/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-01-21 09:19:20 +01:00
void perf_callchain_user(struct perf_callchain_entry *entry,
struct pt_regs *regs)
{
}
static void save_raw_perf_callchain(struct perf_callchain_entry *entry,
unsigned long reg29)
{
unsigned long *sp = (unsigned long *)reg29;
unsigned long addr;
while (!kstack_end(sp)) {
addr = *sp++;
if (__kernel_text_address(addr)) {
MIPS, Perf-events: Work with the new callchain interface This is the MIPS part of the following commits by Frederic Weisbecker: - f72c1a931e311bb7780fee19e41a89ac42cab50e perf: Factorize callchain context handling Store the kernel and user contexts from the generic layer instead of archs, this gathers some repetitive code. - 56962b4449af34070bb1994621ef4f0265eed4d8 perf: Generalize some arch callchain code - Most archs use one callchain buffer per cpu, except x86 that needs to deal with NMIs. Provide a default perf_callchain_buffer() implementation that x86 overrides. - Centralize all the kernel/user regs handling and invoke new arch handlers from there: perf_callchain_user() / perf_callchain_kernel() That avoid all the user_mode(), current->mm checks and so... - Invert some parameters in perf_callchain_*() helpers: entry to the left, regs to the right, following the traditional (dst, src). - 70791ce9ba68a5921c9905ef05d23f62a90bc10c perf: Generalize callchain_store() callchain_store() is the same on every archs, inline it in perf_event.h and rename it to perf_callchain_store() to avoid any collision. This removes repetitive code. - c1a65932fd7216fdc9a0db8bbffe1d47842f862c perf: Drop unappropriate tests on arch callchains Drop the TASK_RUNNING test on user tasks for callchains as this check doesn't seem to make any sense. Also remove the tests for !current that is not supposed to happen and current->pid as this should be handled at the generic level, with exclude_idle attribute. Reported-by: Wu Zhangjin <wuzhangjin@gmail.com> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Acked-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@gmail.com> To: a.p.zijlstra@chello.nl To: will.deacon@arm.com Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: paulus@samba.org Cc: mingo@elte.hu Cc: acme@redhat.com Cc: dengcheng.zhu@gmail.com Cc: matt@console-pimps.org Cc: sshtylyov@mvista.com Patchwork: http://patchwork.linux-mips.org/patch/2014/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-01-21 09:19:20 +01:00
perf_callchain_store(entry, addr);
if (entry->nr >= PERF_MAX_STACK_DEPTH)
break;
}
}
}
MIPS, Perf-events: Work with the new callchain interface This is the MIPS part of the following commits by Frederic Weisbecker: - f72c1a931e311bb7780fee19e41a89ac42cab50e perf: Factorize callchain context handling Store the kernel and user contexts from the generic layer instead of archs, this gathers some repetitive code. - 56962b4449af34070bb1994621ef4f0265eed4d8 perf: Generalize some arch callchain code - Most archs use one callchain buffer per cpu, except x86 that needs to deal with NMIs. Provide a default perf_callchain_buffer() implementation that x86 overrides. - Centralize all the kernel/user regs handling and invoke new arch handlers from there: perf_callchain_user() / perf_callchain_kernel() That avoid all the user_mode(), current->mm checks and so... - Invert some parameters in perf_callchain_*() helpers: entry to the left, regs to the right, following the traditional (dst, src). - 70791ce9ba68a5921c9905ef05d23f62a90bc10c perf: Generalize callchain_store() callchain_store() is the same on every archs, inline it in perf_event.h and rename it to perf_callchain_store() to avoid any collision. This removes repetitive code. - c1a65932fd7216fdc9a0db8bbffe1d47842f862c perf: Drop unappropriate tests on arch callchains Drop the TASK_RUNNING test on user tasks for callchains as this check doesn't seem to make any sense. Also remove the tests for !current that is not supposed to happen and current->pid as this should be handled at the generic level, with exclude_idle attribute. Reported-by: Wu Zhangjin <wuzhangjin@gmail.com> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Acked-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@gmail.com> To: a.p.zijlstra@chello.nl To: will.deacon@arm.com Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: paulus@samba.org Cc: mingo@elte.hu Cc: acme@redhat.com Cc: dengcheng.zhu@gmail.com Cc: matt@console-pimps.org Cc: sshtylyov@mvista.com Patchwork: http://patchwork.linux-mips.org/patch/2014/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-01-21 09:19:20 +01:00
void perf_callchain_kernel(struct perf_callchain_entry *entry,
struct pt_regs *regs)
{
unsigned long sp = regs->regs[29];
#ifdef CONFIG_KALLSYMS
unsigned long ra = regs->regs[31];
unsigned long pc = regs->cp0_epc;
if (raw_show_trace || !__kernel_text_address(pc)) {
unsigned long stack_page =
(unsigned long)task_stack_page(current);
if (stack_page && sp >= stack_page &&
sp <= stack_page + THREAD_SIZE - 32)
save_raw_perf_callchain(entry, sp);
return;
}
do {
MIPS, Perf-events: Work with the new callchain interface This is the MIPS part of the following commits by Frederic Weisbecker: - f72c1a931e311bb7780fee19e41a89ac42cab50e perf: Factorize callchain context handling Store the kernel and user contexts from the generic layer instead of archs, this gathers some repetitive code. - 56962b4449af34070bb1994621ef4f0265eed4d8 perf: Generalize some arch callchain code - Most archs use one callchain buffer per cpu, except x86 that needs to deal with NMIs. Provide a default perf_callchain_buffer() implementation that x86 overrides. - Centralize all the kernel/user regs handling and invoke new arch handlers from there: perf_callchain_user() / perf_callchain_kernel() That avoid all the user_mode(), current->mm checks and so... - Invert some parameters in perf_callchain_*() helpers: entry to the left, regs to the right, following the traditional (dst, src). - 70791ce9ba68a5921c9905ef05d23f62a90bc10c perf: Generalize callchain_store() callchain_store() is the same on every archs, inline it in perf_event.h and rename it to perf_callchain_store() to avoid any collision. This removes repetitive code. - c1a65932fd7216fdc9a0db8bbffe1d47842f862c perf: Drop unappropriate tests on arch callchains Drop the TASK_RUNNING test on user tasks for callchains as this check doesn't seem to make any sense. Also remove the tests for !current that is not supposed to happen and current->pid as this should be handled at the generic level, with exclude_idle attribute. Reported-by: Wu Zhangjin <wuzhangjin@gmail.com> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Acked-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@gmail.com> To: a.p.zijlstra@chello.nl To: will.deacon@arm.com Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: paulus@samba.org Cc: mingo@elte.hu Cc: acme@redhat.com Cc: dengcheng.zhu@gmail.com Cc: matt@console-pimps.org Cc: sshtylyov@mvista.com Patchwork: http://patchwork.linux-mips.org/patch/2014/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-01-21 09:19:20 +01:00
perf_callchain_store(entry, pc);
if (entry->nr >= PERF_MAX_STACK_DEPTH)
break;
pc = unwind_stack(current, &sp, pc, &ra);
} while (pc);
#else
save_raw_perf_callchain(entry, sp);
#endif
}