Thermal: imx: add i.mx6sx thermal support
i.MX6SX has some new features of thermal interrupt function, there are LOW, HIGH and PANIC irq for thermal sensor, so add platform data to separate different thermal version; The reset value of LOW ALARM is 0 which means the highest temp, so the LOW ALARM will be triggered once irq is enabled, so we need to correct it before enabling thermal irq; Enable PANIC ALARM as critical trip point, it will trigger system reset via SRC module once PANIC IRQ is triggered, it is pure hardware function, so use it instead of software reset by cooling device. Signed-off-by: Anson Huang <b20788@freescale.com> Tested-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
This commit is contained in:
parent
a020279ee6
commit
3c94f17e72
|
@ -1,7 +1,10 @@
|
||||||
* Temperature Monitor (TEMPMON) on Freescale i.MX SoCs
|
* Temperature Monitor (TEMPMON) on Freescale i.MX SoCs
|
||||||
|
|
||||||
Required properties:
|
Required properties:
|
||||||
- compatible : "fsl,imx6q-thermal"
|
- compatible : "fsl,imx6q-tempmon" for i.MX6Q, "fsl,imx6sx-tempmon" for i.MX6SX.
|
||||||
|
i.MX6SX has two more IRQs than i.MX6Q, one is IRQ_LOW and the other is IRQ_PANIC,
|
||||||
|
when temperature is below than low threshold, IRQ_LOW will be triggered, when temperature
|
||||||
|
is higher than panic threshold, system will auto reboot by SRC module.
|
||||||
- fsl,tempmon : phandle pointer to system controller that contains TEMPMON
|
- fsl,tempmon : phandle pointer to system controller that contains TEMPMON
|
||||||
control registers, e.g. ANATOP on imx6q.
|
control registers, e.g. ANATOP on imx6q.
|
||||||
- fsl,tempmon-data : phandle pointer to fuse controller that contains TEMPMON
|
- fsl,tempmon-data : phandle pointer to fuse controller that contains TEMPMON
|
||||||
|
|
|
@ -19,6 +19,7 @@
|
||||||
#include <linux/mfd/syscon.h>
|
#include <linux/mfd/syscon.h>
|
||||||
#include <linux/module.h>
|
#include <linux/module.h>
|
||||||
#include <linux/of.h>
|
#include <linux/of.h>
|
||||||
|
#include <linux/of_device.h>
|
||||||
#include <linux/platform_device.h>
|
#include <linux/platform_device.h>
|
||||||
#include <linux/regmap.h>
|
#include <linux/regmap.h>
|
||||||
#include <linux/slab.h>
|
#include <linux/slab.h>
|
||||||
|
@ -31,6 +32,11 @@
|
||||||
|
|
||||||
#define MISC0 0x0150
|
#define MISC0 0x0150
|
||||||
#define MISC0_REFTOP_SELBIASOFF (1 << 3)
|
#define MISC0_REFTOP_SELBIASOFF (1 << 3)
|
||||||
|
#define MISC1 0x0160
|
||||||
|
#define MISC1_IRQ_TEMPHIGH (1 << 29)
|
||||||
|
/* Below LOW and PANIC bits are only for TEMPMON_IMX6SX */
|
||||||
|
#define MISC1_IRQ_TEMPLOW (1 << 28)
|
||||||
|
#define MISC1_IRQ_TEMPPANIC (1 << 27)
|
||||||
|
|
||||||
#define TEMPSENSE0 0x0180
|
#define TEMPSENSE0 0x0180
|
||||||
#define TEMPSENSE0_ALARM_VALUE_SHIFT 20
|
#define TEMPSENSE0_ALARM_VALUE_SHIFT 20
|
||||||
|
@ -43,6 +49,12 @@
|
||||||
|
|
||||||
#define TEMPSENSE1 0x0190
|
#define TEMPSENSE1 0x0190
|
||||||
#define TEMPSENSE1_MEASURE_FREQ 0xffff
|
#define TEMPSENSE1_MEASURE_FREQ 0xffff
|
||||||
|
/* Below TEMPSENSE2 is only for TEMPMON_IMX6SX */
|
||||||
|
#define TEMPSENSE2 0x0290
|
||||||
|
#define TEMPSENSE2_LOW_VALUE_SHIFT 0
|
||||||
|
#define TEMPSENSE2_LOW_VALUE_MASK 0xfff
|
||||||
|
#define TEMPSENSE2_PANIC_VALUE_SHIFT 16
|
||||||
|
#define TEMPSENSE2_PANIC_VALUE_MASK 0xfff0000
|
||||||
|
|
||||||
#define OCOTP_ANA1 0x04e0
|
#define OCOTP_ANA1 0x04e0
|
||||||
|
|
||||||
|
@ -66,6 +78,21 @@ enum imx_thermal_trip {
|
||||||
#define FACTOR1 15976
|
#define FACTOR1 15976
|
||||||
#define FACTOR2 4297157
|
#define FACTOR2 4297157
|
||||||
|
|
||||||
|
#define TEMPMON_IMX6Q 1
|
||||||
|
#define TEMPMON_IMX6SX 2
|
||||||
|
|
||||||
|
struct thermal_soc_data {
|
||||||
|
u32 version;
|
||||||
|
};
|
||||||
|
|
||||||
|
static struct thermal_soc_data thermal_imx6q_data = {
|
||||||
|
.version = TEMPMON_IMX6Q,
|
||||||
|
};
|
||||||
|
|
||||||
|
static struct thermal_soc_data thermal_imx6sx_data = {
|
||||||
|
.version = TEMPMON_IMX6SX,
|
||||||
|
};
|
||||||
|
|
||||||
struct imx_thermal_data {
|
struct imx_thermal_data {
|
||||||
struct thermal_zone_device *tz;
|
struct thermal_zone_device *tz;
|
||||||
struct thermal_cooling_device *cdev;
|
struct thermal_cooling_device *cdev;
|
||||||
|
@ -79,8 +106,21 @@ struct imx_thermal_data {
|
||||||
bool irq_enabled;
|
bool irq_enabled;
|
||||||
int irq;
|
int irq;
|
||||||
struct clk *thermal_clk;
|
struct clk *thermal_clk;
|
||||||
|
const struct thermal_soc_data *socdata;
|
||||||
};
|
};
|
||||||
|
|
||||||
|
static void imx_set_panic_temp(struct imx_thermal_data *data,
|
||||||
|
signed long panic_temp)
|
||||||
|
{
|
||||||
|
struct regmap *map = data->tempmon;
|
||||||
|
int critical_value;
|
||||||
|
|
||||||
|
critical_value = (data->c2 - panic_temp) / data->c1;
|
||||||
|
regmap_write(map, TEMPSENSE2 + REG_CLR, TEMPSENSE2_PANIC_VALUE_MASK);
|
||||||
|
regmap_write(map, TEMPSENSE2 + REG_SET, critical_value <<
|
||||||
|
TEMPSENSE2_PANIC_VALUE_SHIFT);
|
||||||
|
}
|
||||||
|
|
||||||
static void imx_set_alarm_temp(struct imx_thermal_data *data,
|
static void imx_set_alarm_temp(struct imx_thermal_data *data,
|
||||||
signed long alarm_temp)
|
signed long alarm_temp)
|
||||||
{
|
{
|
||||||
|
@ -142,13 +182,17 @@ static int imx_get_temp(struct thermal_zone_device *tz, unsigned long *temp)
|
||||||
/* See imx_get_sensor_data() for formula derivation */
|
/* See imx_get_sensor_data() for formula derivation */
|
||||||
*temp = data->c2 - n_meas * data->c1;
|
*temp = data->c2 - n_meas * data->c1;
|
||||||
|
|
||||||
/* Update alarm value to next higher trip point */
|
/* Update alarm value to next higher trip point for TEMPMON_IMX6Q */
|
||||||
if (data->alarm_temp == data->temp_passive && *temp >= data->temp_passive)
|
if (data->socdata->version == TEMPMON_IMX6Q) {
|
||||||
imx_set_alarm_temp(data, data->temp_critical);
|
if (data->alarm_temp == data->temp_passive &&
|
||||||
if (data->alarm_temp == data->temp_critical && *temp < data->temp_passive) {
|
*temp >= data->temp_passive)
|
||||||
imx_set_alarm_temp(data, data->temp_passive);
|
imx_set_alarm_temp(data, data->temp_critical);
|
||||||
dev_dbg(&tz->device, "thermal alarm off: T < %lu\n",
|
if (data->alarm_temp == data->temp_critical &&
|
||||||
data->alarm_temp / 1000);
|
*temp < data->temp_passive) {
|
||||||
|
imx_set_alarm_temp(data, data->temp_passive);
|
||||||
|
dev_dbg(&tz->device, "thermal alarm off: T < %lu\n",
|
||||||
|
data->alarm_temp / 1000);
|
||||||
|
}
|
||||||
}
|
}
|
||||||
|
|
||||||
if (*temp != data->last_temp) {
|
if (*temp != data->last_temp) {
|
||||||
|
@ -398,8 +442,17 @@ static irqreturn_t imx_thermal_alarm_irq_thread(int irq, void *dev)
|
||||||
return IRQ_HANDLED;
|
return IRQ_HANDLED;
|
||||||
}
|
}
|
||||||
|
|
||||||
|
static const struct of_device_id of_imx_thermal_match[] = {
|
||||||
|
{ .compatible = "fsl,imx6q-tempmon", .data = &thermal_imx6q_data, },
|
||||||
|
{ .compatible = "fsl,imx6sx-tempmon", .data = &thermal_imx6sx_data, },
|
||||||
|
{ /* end */ }
|
||||||
|
};
|
||||||
|
MODULE_DEVICE_TABLE(of, of_imx_thermal_match);
|
||||||
|
|
||||||
static int imx_thermal_probe(struct platform_device *pdev)
|
static int imx_thermal_probe(struct platform_device *pdev)
|
||||||
{
|
{
|
||||||
|
const struct of_device_id *of_id =
|
||||||
|
of_match_device(of_imx_thermal_match, &pdev->dev);
|
||||||
struct imx_thermal_data *data;
|
struct imx_thermal_data *data;
|
||||||
struct cpumask clip_cpus;
|
struct cpumask clip_cpus;
|
||||||
struct regmap *map;
|
struct regmap *map;
|
||||||
|
@ -418,6 +471,20 @@ static int imx_thermal_probe(struct platform_device *pdev)
|
||||||
}
|
}
|
||||||
data->tempmon = map;
|
data->tempmon = map;
|
||||||
|
|
||||||
|
data->socdata = of_id->data;
|
||||||
|
|
||||||
|
/* make sure the IRQ flag is clear before enabling irq on i.MX6SX */
|
||||||
|
if (data->socdata->version == TEMPMON_IMX6SX) {
|
||||||
|
regmap_write(map, MISC1 + REG_CLR, MISC1_IRQ_TEMPHIGH |
|
||||||
|
MISC1_IRQ_TEMPLOW | MISC1_IRQ_TEMPPANIC);
|
||||||
|
/*
|
||||||
|
* reset value of LOW ALARM is incorrect, set it to lowest
|
||||||
|
* value to avoid false trigger of low alarm.
|
||||||
|
*/
|
||||||
|
regmap_write(map, TEMPSENSE2 + REG_SET,
|
||||||
|
TEMPSENSE2_LOW_VALUE_MASK);
|
||||||
|
}
|
||||||
|
|
||||||
data->irq = platform_get_irq(pdev, 0);
|
data->irq = platform_get_irq(pdev, 0);
|
||||||
if (data->irq < 0)
|
if (data->irq < 0)
|
||||||
return data->irq;
|
return data->irq;
|
||||||
|
@ -489,6 +556,10 @@ static int imx_thermal_probe(struct platform_device *pdev)
|
||||||
measure_freq = DIV_ROUND_UP(32768, 10); /* 10 Hz */
|
measure_freq = DIV_ROUND_UP(32768, 10); /* 10 Hz */
|
||||||
regmap_write(map, TEMPSENSE1 + REG_SET, measure_freq);
|
regmap_write(map, TEMPSENSE1 + REG_SET, measure_freq);
|
||||||
imx_set_alarm_temp(data, data->temp_passive);
|
imx_set_alarm_temp(data, data->temp_passive);
|
||||||
|
|
||||||
|
if (data->socdata->version == TEMPMON_IMX6SX)
|
||||||
|
imx_set_panic_temp(data, data->temp_critical);
|
||||||
|
|
||||||
regmap_write(map, TEMPSENSE0 + REG_CLR, TEMPSENSE0_POWER_DOWN);
|
regmap_write(map, TEMPSENSE0 + REG_CLR, TEMPSENSE0_POWER_DOWN);
|
||||||
regmap_write(map, TEMPSENSE0 + REG_SET, TEMPSENSE0_MEASURE_TEMP);
|
regmap_write(map, TEMPSENSE0 + REG_SET, TEMPSENSE0_MEASURE_TEMP);
|
||||||
|
|
||||||
|
@ -550,12 +621,6 @@ static int imx_thermal_resume(struct device *dev)
|
||||||
static SIMPLE_DEV_PM_OPS(imx_thermal_pm_ops,
|
static SIMPLE_DEV_PM_OPS(imx_thermal_pm_ops,
|
||||||
imx_thermal_suspend, imx_thermal_resume);
|
imx_thermal_suspend, imx_thermal_resume);
|
||||||
|
|
||||||
static const struct of_device_id of_imx_thermal_match[] = {
|
|
||||||
{ .compatible = "fsl,imx6q-tempmon", },
|
|
||||||
{ /* end */ }
|
|
||||||
};
|
|
||||||
MODULE_DEVICE_TABLE(of, of_imx_thermal_match);
|
|
||||||
|
|
||||||
static struct platform_driver imx_thermal = {
|
static struct platform_driver imx_thermal = {
|
||||||
.driver = {
|
.driver = {
|
||||||
.name = "imx_thermal",
|
.name = "imx_thermal",
|
||||||
|
|
Loading…
Reference in New Issue