Merge branch 'for-linus' of git://git.o-hand.com/linux-mfd

* 'for-linus' of git://git.o-hand.com/linux-mfd:
  mfd: let asic3 use mem resource instead of bus_shift
  mfd: remove DS1WM register definitions from asic3.h
  mfd: add ASIC3_CONFIG_GPIO templates
  mfd: fix the asic3 irq demux code
  mfd: asic3 should depend on gpiolib
  mfd: fix asic3 config array initialisation
  mfd: move asic3 probe functions into __init section
  mfd: Use uppercase only for asic3 macros and defines
  mfd: use dev_* macros for asic3 debugging
  mfd: New asic3 gpio configuration code
  mfd: asic3 children platform data removal
  mfd: asic3 gpiolib support
This commit is contained in:
Linus Torvalds 2008-07-20 21:16:27 -07:00
commit ae0645a451
3 changed files with 328 additions and 265 deletions

View File

@ -17,7 +17,7 @@ config MFD_SM501
config MFD_ASIC3
bool "Support for Compaq ASIC3"
depends on GENERIC_HARDIRQS && ARM
depends on GENERIC_HARDIRQS && HAVE_GPIO_LIB && ARM
---help---
This driver supports the ASIC3 multifunction chip found on many
PDAs (mainly iPAQ and HTC based ones)

View File

@ -9,7 +9,7 @@
*
* Copyright 2001 Compaq Computer Corporation.
* Copyright 2004-2005 Phil Blundell
* Copyright 2007 OpenedHand Ltd.
* Copyright 2007-2008 OpenedHand Ltd.
*
* Authors: Phil Blundell <pb@handhelds.org>,
* Samuel Ortiz <sameo@openedhand.com>
@ -19,12 +19,26 @@
#include <linux/version.h>
#include <linux/kernel.h>
#include <linux/irq.h>
#include <linux/gpio.h>
#include <linux/io.h>
#include <linux/spinlock.h>
#include <linux/platform_device.h>
#include <linux/mfd/asic3.h>
struct asic3 {
void __iomem *mapping;
unsigned int bus_shift;
unsigned int irq_nr;
unsigned int irq_base;
spinlock_t lock;
u16 irq_bothedge[4];
struct gpio_chip gpio;
struct device *dev;
};
static int asic3_gpio_get(struct gpio_chip *chip, unsigned offset);
static inline void asic3_write_register(struct asic3 *asic,
unsigned int reg, u32 value)
{
@ -41,8 +55,8 @@ static inline u32 asic3_read_register(struct asic3 *asic,
/* IRQs */
#define MAX_ASIC_ISR_LOOPS 20
#define ASIC3_GPIO_Base_INCR \
(ASIC3_GPIO_B_Base - ASIC3_GPIO_A_Base)
#define ASIC3_GPIO_BASE_INCR \
(ASIC3_GPIO_B_BASE - ASIC3_GPIO_A_BASE)
static void asic3_irq_flip_edge(struct asic3 *asic,
u32 base, int bit)
@ -52,10 +66,10 @@ static void asic3_irq_flip_edge(struct asic3 *asic,
spin_lock_irqsave(&asic->lock, flags);
edge = asic3_read_register(asic,
base + ASIC3_GPIO_EdgeTrigger);
base + ASIC3_GPIO_EDGE_TRIGGER);
edge ^= bit;
asic3_write_register(asic,
base + ASIC3_GPIO_EdgeTrigger, edge);
base + ASIC3_GPIO_EDGE_TRIGGER, edge);
spin_unlock_irqrestore(&asic->lock, flags);
}
@ -75,7 +89,7 @@ static void asic3_irq_demux(unsigned int irq, struct irq_desc *desc)
spin_lock_irqsave(&asic->lock, flags);
status = asic3_read_register(asic,
ASIC3_OFFSET(INTR, PIntStat));
ASIC3_OFFSET(INTR, P_INT_STAT));
spin_unlock_irqrestore(&asic->lock, flags);
/* Check all ten register bits */
@ -87,17 +101,17 @@ static void asic3_irq_demux(unsigned int irq, struct irq_desc *desc)
if (status & (1 << bank)) {
unsigned long base, istat;
base = ASIC3_GPIO_A_Base
+ bank * ASIC3_GPIO_Base_INCR;
base = ASIC3_GPIO_A_BASE
+ bank * ASIC3_GPIO_BASE_INCR;
spin_lock_irqsave(&asic->lock, flags);
istat = asic3_read_register(asic,
base +
ASIC3_GPIO_IntStatus);
ASIC3_GPIO_INT_STATUS);
/* Clearing IntStatus */
asic3_write_register(asic,
base +
ASIC3_GPIO_IntStatus, 0);
ASIC3_GPIO_INT_STATUS, 0);
spin_unlock_irqrestore(&asic->lock, flags);
for (i = 0; i < ASIC3_GPIOS_PER_BANK; i++) {
@ -123,7 +137,7 @@ static void asic3_irq_demux(unsigned int irq, struct irq_desc *desc)
for (i = ASIC3_NUM_GPIOS; i < ASIC3_NR_IRQS; i++) {
/* They start at bit 4 and go up */
if (status & (1 << (i - ASIC3_NUM_GPIOS + 4))) {
desc = irq_desc + + i;
desc = irq_desc + asic->irq_base + i;
desc->handle_irq(asic->irq_base + i,
desc);
}
@ -131,8 +145,7 @@ static void asic3_irq_demux(unsigned int irq, struct irq_desc *desc)
}
if (iter >= MAX_ASIC_ISR_LOOPS)
printk(KERN_ERR "%s: interrupt processing overrun\n",
__func__);
dev_err(asic->dev, "interrupt processing overrun\n");
}
static inline int asic3_irq_to_bank(struct asic3 *asic, int irq)
@ -141,7 +154,7 @@ static inline int asic3_irq_to_bank(struct asic3 *asic, int irq)
n = (irq - asic->irq_base) >> 4;
return (n * (ASIC3_GPIO_B_Base - ASIC3_GPIO_A_Base));
return (n * (ASIC3_GPIO_B_BASE - ASIC3_GPIO_A_BASE));
}
static inline int asic3_irq_to_index(struct asic3 *asic, int irq)
@ -159,9 +172,9 @@ static void asic3_mask_gpio_irq(unsigned int irq)
index = asic3_irq_to_index(asic, irq);
spin_lock_irqsave(&asic->lock, flags);
val = asic3_read_register(asic, bank + ASIC3_GPIO_Mask);
val = asic3_read_register(asic, bank + ASIC3_GPIO_MASK);
val |= 1 << index;
asic3_write_register(asic, bank + ASIC3_GPIO_Mask, val);
asic3_write_register(asic, bank + ASIC3_GPIO_MASK, val);
spin_unlock_irqrestore(&asic->lock, flags);
}
@ -173,15 +186,15 @@ static void asic3_mask_irq(unsigned int irq)
spin_lock_irqsave(&asic->lock, flags);
regval = asic3_read_register(asic,
ASIC3_INTR_Base +
ASIC3_INTR_IntMask);
ASIC3_INTR_BASE +
ASIC3_INTR_INT_MASK);
regval &= ~(ASIC3_INTMASK_MASK0 <<
(irq - (asic->irq_base + ASIC3_NUM_GPIOS)));
asic3_write_register(asic,
ASIC3_INTR_Base +
ASIC3_INTR_IntMask,
ASIC3_INTR_BASE +
ASIC3_INTR_INT_MASK,
regval);
spin_unlock_irqrestore(&asic->lock, flags);
}
@ -196,9 +209,9 @@ static void asic3_unmask_gpio_irq(unsigned int irq)
index = asic3_irq_to_index(asic, irq);
spin_lock_irqsave(&asic->lock, flags);
val = asic3_read_register(asic, bank + ASIC3_GPIO_Mask);
val = asic3_read_register(asic, bank + ASIC3_GPIO_MASK);
val &= ~(1 << index);
asic3_write_register(asic, bank + ASIC3_GPIO_Mask, val);
asic3_write_register(asic, bank + ASIC3_GPIO_MASK, val);
spin_unlock_irqrestore(&asic->lock, flags);
}
@ -210,15 +223,15 @@ static void asic3_unmask_irq(unsigned int irq)
spin_lock_irqsave(&asic->lock, flags);
regval = asic3_read_register(asic,
ASIC3_INTR_Base +
ASIC3_INTR_IntMask);
ASIC3_INTR_BASE +
ASIC3_INTR_INT_MASK);
regval |= (ASIC3_INTMASK_MASK0 <<
(irq - (asic->irq_base + ASIC3_NUM_GPIOS)));
asic3_write_register(asic,
ASIC3_INTR_Base +
ASIC3_INTR_IntMask,
ASIC3_INTR_BASE +
ASIC3_INTR_INT_MASK,
regval);
spin_unlock_irqrestore(&asic->lock, flags);
}
@ -236,11 +249,11 @@ static int asic3_gpio_irq_type(unsigned int irq, unsigned int type)
spin_lock_irqsave(&asic->lock, flags);
level = asic3_read_register(asic,
bank + ASIC3_GPIO_LevelTrigger);
bank + ASIC3_GPIO_LEVEL_TRIGGER);
edge = asic3_read_register(asic,
bank + ASIC3_GPIO_EdgeTrigger);
bank + ASIC3_GPIO_EDGE_TRIGGER);
trigger = asic3_read_register(asic,
bank + ASIC3_GPIO_TriggerType);
bank + ASIC3_GPIO_TRIGGER_TYPE);
asic->irq_bothedge[(irq - asic->irq_base) >> 4] &= ~bit;
if (type == IRQT_RISING) {
@ -251,7 +264,7 @@ static int asic3_gpio_irq_type(unsigned int irq, unsigned int type)
edge &= ~bit;
} else if (type == IRQT_BOTHEDGE) {
trigger |= bit;
if (asic3_gpio_get_value(asic, irq - asic->irq_base))
if (asic3_gpio_get(&asic->gpio, irq - asic->irq_base))
edge &= ~bit;
else
edge |= bit;
@ -268,13 +281,13 @@ static int asic3_gpio_irq_type(unsigned int irq, unsigned int type)
* be careful to not unmask them if mask was also called.
* Probably need internal state for mask.
*/
printk(KERN_NOTICE "asic3: irq type not changed.\n");
dev_notice(asic->dev, "irq type not changed\n");
}
asic3_write_register(asic, bank + ASIC3_GPIO_LevelTrigger,
asic3_write_register(asic, bank + ASIC3_GPIO_LEVEL_TRIGGER,
level);
asic3_write_register(asic, bank + ASIC3_GPIO_EdgeTrigger,
asic3_write_register(asic, bank + ASIC3_GPIO_EDGE_TRIGGER,
edge);
asic3_write_register(asic, bank + ASIC3_GPIO_TriggerType,
asic3_write_register(asic, bank + ASIC3_GPIO_TRIGGER_TYPE,
trigger);
spin_unlock_irqrestore(&asic->lock, flags);
return 0;
@ -295,11 +308,12 @@ static struct irq_chip asic3_irq_chip = {
.unmask = asic3_unmask_irq,
};
static int asic3_irq_probe(struct platform_device *pdev)
static int __init asic3_irq_probe(struct platform_device *pdev)
{
struct asic3 *asic = platform_get_drvdata(pdev);
unsigned long clksel = 0;
unsigned int irq, irq_base;
int map_size;
asic->irq_nr = platform_get_irq(pdev, 0);
if (asic->irq_nr < 0)
@ -323,7 +337,7 @@ static int asic3_irq_probe(struct platform_device *pdev)
set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
}
asic3_write_register(asic, ASIC3_OFFSET(INTR, IntMask),
asic3_write_register(asic, ASIC3_OFFSET(INTR, INT_MASK),
ASIC3_INTMASK_GINTMASK);
set_irq_chained_handler(asic->irq_nr, asic3_irq_demux);
@ -350,149 +364,182 @@ static void asic3_irq_remove(struct platform_device *pdev)
}
/* GPIOs */
static inline u32 asic3_get_gpio(struct asic3 *asic, unsigned int base,
unsigned int function)
{
return asic3_read_register(asic, base + function);
}
static void asic3_set_gpio(struct asic3 *asic, unsigned int base,
unsigned int function, u32 bits, u32 val)
static int asic3_gpio_direction(struct gpio_chip *chip,
unsigned offset, int out)
{
u32 mask = ASIC3_GPIO_TO_MASK(offset), out_reg;
unsigned int gpio_base;
unsigned long flags;
struct asic3 *asic;
spin_lock_irqsave(&asic->lock, flags);
val |= (asic3_read_register(asic, base + function) & ~bits);
asic = container_of(chip, struct asic3, gpio);
gpio_base = ASIC3_GPIO_TO_BASE(offset);
asic3_write_register(asic, base + function, val);
spin_unlock_irqrestore(&asic->lock, flags);
}
#define asic3_get_gpio_a(asic, fn) \
asic3_get_gpio(asic, ASIC3_GPIO_A_Base, ASIC3_GPIO_##fn)
#define asic3_get_gpio_b(asic, fn) \
asic3_get_gpio(asic, ASIC3_GPIO_B_Base, ASIC3_GPIO_##fn)
#define asic3_get_gpio_c(asic, fn) \
asic3_get_gpio(asic, ASIC3_GPIO_C_Base, ASIC3_GPIO_##fn)
#define asic3_get_gpio_d(asic, fn) \
asic3_get_gpio(asic, ASIC3_GPIO_D_Base, ASIC3_GPIO_##fn)
#define asic3_set_gpio_a(asic, fn, bits, val) \
asic3_set_gpio(asic, ASIC3_GPIO_A_Base, ASIC3_GPIO_##fn, bits, val)
#define asic3_set_gpio_b(asic, fn, bits, val) \
asic3_set_gpio(asic, ASIC3_GPIO_B_Base, ASIC3_GPIO_##fn, bits, val)
#define asic3_set_gpio_c(asic, fn, bits, val) \
asic3_set_gpio(asic, ASIC3_GPIO_C_Base, ASIC3_GPIO_##fn, bits, val)
#define asic3_set_gpio_d(asic, fn, bits, val) \
asic3_set_gpio(asic, ASIC3_GPIO_D_Base, ASIC3_GPIO_##fn, bits, val)
#define asic3_set_gpio_banks(asic, fn, bits, pdata, field) \
do { \
asic3_set_gpio_a((asic), fn, (bits), (pdata)->gpio_a.field); \
asic3_set_gpio_b((asic), fn, (bits), (pdata)->gpio_b.field); \
asic3_set_gpio_c((asic), fn, (bits), (pdata)->gpio_c.field); \
asic3_set_gpio_d((asic), fn, (bits), (pdata)->gpio_d.field); \
} while (0)
int asic3_gpio_get_value(struct asic3 *asic, unsigned gpio)
{
u32 mask = ASIC3_GPIO_bit(gpio);
switch (gpio >> 4) {
case ASIC3_GPIO_BANK_A:
return asic3_get_gpio_a(asic, Status) & mask;
case ASIC3_GPIO_BANK_B:
return asic3_get_gpio_b(asic, Status) & mask;
case ASIC3_GPIO_BANK_C:
return asic3_get_gpio_c(asic, Status) & mask;
case ASIC3_GPIO_BANK_D:
return asic3_get_gpio_d(asic, Status) & mask;
default:
printk(KERN_ERR "%s: invalid GPIO value 0x%x",
__func__, gpio);
if (gpio_base > ASIC3_GPIO_D_BASE) {
dev_err(asic->dev, "Invalid base (0x%x) for gpio %d\n",
gpio_base, offset);
return -EINVAL;
}
}
EXPORT_SYMBOL(asic3_gpio_get_value);
void asic3_gpio_set_value(struct asic3 *asic, unsigned gpio, int val)
{
u32 mask = ASIC3_GPIO_bit(gpio);
u32 bitval = 0;
if (val)
bitval = mask;
spin_lock_irqsave(&asic->lock, flags);
switch (gpio >> 4) {
case ASIC3_GPIO_BANK_A:
asic3_set_gpio_a(asic, Out, mask, bitval);
return;
case ASIC3_GPIO_BANK_B:
asic3_set_gpio_b(asic, Out, mask, bitval);
return;
case ASIC3_GPIO_BANK_C:
asic3_set_gpio_c(asic, Out, mask, bitval);
return;
case ASIC3_GPIO_BANK_D:
asic3_set_gpio_d(asic, Out, mask, bitval);
return;
default:
printk(KERN_ERR "%s: invalid GPIO value 0x%x",
__func__, gpio);
return;
}
}
EXPORT_SYMBOL(asic3_gpio_set_value);
out_reg = asic3_read_register(asic, gpio_base + ASIC3_GPIO_DIRECTION);
static int asic3_gpio_probe(struct platform_device *pdev)
{
struct asic3_platform_data *pdata = pdev->dev.platform_data;
struct asic3 *asic = platform_get_drvdata(pdev);
/* Input is 0, Output is 1 */
if (out)
out_reg |= mask;
else
out_reg &= ~mask;
asic3_write_register(asic, ASIC3_GPIO_OFFSET(A, Mask), 0xffff);
asic3_write_register(asic, ASIC3_GPIO_OFFSET(B, Mask), 0xffff);
asic3_write_register(asic, ASIC3_GPIO_OFFSET(C, Mask), 0xffff);
asic3_write_register(asic, ASIC3_GPIO_OFFSET(D, Mask), 0xffff);
asic3_write_register(asic, gpio_base + ASIC3_GPIO_DIRECTION, out_reg);
asic3_set_gpio_a(asic, SleepMask, 0xffff, 0xffff);
asic3_set_gpio_b(asic, SleepMask, 0xffff, 0xffff);
asic3_set_gpio_c(asic, SleepMask, 0xffff, 0xffff);
asic3_set_gpio_d(asic, SleepMask, 0xffff, 0xffff);
if (pdata) {
asic3_set_gpio_banks(asic, Out, 0xffff, pdata, init);
asic3_set_gpio_banks(asic, Direction, 0xffff, pdata, dir);
asic3_set_gpio_banks(asic, SleepMask, 0xffff, pdata,
sleep_mask);
asic3_set_gpio_banks(asic, SleepOut, 0xffff, pdata, sleep_out);
asic3_set_gpio_banks(asic, BattFaultOut, 0xffff, pdata,
batt_fault_out);
asic3_set_gpio_banks(asic, SleepConf, 0xffff, pdata,
sleep_conf);
asic3_set_gpio_banks(asic, AltFunction, 0xffff, pdata,
alt_function);
}
spin_unlock_irqrestore(&asic->lock, flags);
return 0;
}
static void asic3_gpio_remove(struct platform_device *pdev)
static int asic3_gpio_direction_input(struct gpio_chip *chip,
unsigned offset)
{
return asic3_gpio_direction(chip, offset, 0);
}
static int asic3_gpio_direction_output(struct gpio_chip *chip,
unsigned offset, int value)
{
return asic3_gpio_direction(chip, offset, 1);
}
static int asic3_gpio_get(struct gpio_chip *chip,
unsigned offset)
{
unsigned int gpio_base;
u32 mask = ASIC3_GPIO_TO_MASK(offset);
struct asic3 *asic;
asic = container_of(chip, struct asic3, gpio);
gpio_base = ASIC3_GPIO_TO_BASE(offset);
if (gpio_base > ASIC3_GPIO_D_BASE) {
dev_err(asic->dev, "Invalid base (0x%x) for gpio %d\n",
gpio_base, offset);
return -EINVAL;
}
return asic3_read_register(asic, gpio_base + ASIC3_GPIO_STATUS) & mask;
}
static void asic3_gpio_set(struct gpio_chip *chip,
unsigned offset, int value)
{
u32 mask, out_reg;
unsigned int gpio_base;
unsigned long flags;
struct asic3 *asic;
asic = container_of(chip, struct asic3, gpio);
gpio_base = ASIC3_GPIO_TO_BASE(offset);
if (gpio_base > ASIC3_GPIO_D_BASE) {
dev_err(asic->dev, "Invalid base (0x%x) for gpio %d\n",
gpio_base, offset);
return;
}
mask = ASIC3_GPIO_TO_MASK(offset);
spin_lock_irqsave(&asic->lock, flags);
out_reg = asic3_read_register(asic, gpio_base + ASIC3_GPIO_OUT);
if (value)
out_reg |= mask;
else
out_reg &= ~mask;
asic3_write_register(asic, gpio_base + ASIC3_GPIO_OUT, out_reg);
spin_unlock_irqrestore(&asic->lock, flags);
return;
}
static __init int asic3_gpio_probe(struct platform_device *pdev,
u16 *gpio_config, int num)
{
struct asic3 *asic = platform_get_drvdata(pdev);
u16 alt_reg[ASIC3_NUM_GPIO_BANKS];
u16 out_reg[ASIC3_NUM_GPIO_BANKS];
u16 dir_reg[ASIC3_NUM_GPIO_BANKS];
int i;
memzero(alt_reg, ASIC3_NUM_GPIO_BANKS * sizeof(u16));
memzero(out_reg, ASIC3_NUM_GPIO_BANKS * sizeof(u16));
memzero(dir_reg, ASIC3_NUM_GPIO_BANKS * sizeof(u16));
/* Enable all GPIOs */
asic3_write_register(asic, ASIC3_GPIO_OFFSET(A, MASK), 0xffff);
asic3_write_register(asic, ASIC3_GPIO_OFFSET(B, MASK), 0xffff);
asic3_write_register(asic, ASIC3_GPIO_OFFSET(C, MASK), 0xffff);
asic3_write_register(asic, ASIC3_GPIO_OFFSET(D, MASK), 0xffff);
for (i = 0; i < num; i++) {
u8 alt, pin, dir, init, bank_num, bit_num;
u16 config = gpio_config[i];
pin = ASIC3_CONFIG_GPIO_PIN(config);
alt = ASIC3_CONFIG_GPIO_ALT(config);
dir = ASIC3_CONFIG_GPIO_DIR(config);
init = ASIC3_CONFIG_GPIO_INIT(config);
bank_num = ASIC3_GPIO_TO_BANK(pin);
bit_num = ASIC3_GPIO_TO_BIT(pin);
alt_reg[bank_num] |= (alt << bit_num);
out_reg[bank_num] |= (init << bit_num);
dir_reg[bank_num] |= (dir << bit_num);
}
for (i = 0; i < ASIC3_NUM_GPIO_BANKS; i++) {
asic3_write_register(asic,
ASIC3_BANK_TO_BASE(i) +
ASIC3_GPIO_DIRECTION,
dir_reg[i]);
asic3_write_register(asic,
ASIC3_BANK_TO_BASE(i) + ASIC3_GPIO_OUT,
out_reg[i]);
asic3_write_register(asic,
ASIC3_BANK_TO_BASE(i) +
ASIC3_GPIO_ALT_FUNCTION,
alt_reg[i]);
}
return gpiochip_add(&asic->gpio);
}
static int asic3_gpio_remove(struct platform_device *pdev)
{
struct asic3 *asic = platform_get_drvdata(pdev);
return gpiochip_remove(&asic->gpio);
}
/* Core */
static int asic3_probe(struct platform_device *pdev)
static int __init asic3_probe(struct platform_device *pdev)
{
struct asic3_platform_data *pdata = pdev->dev.platform_data;
struct asic3 *asic;
struct resource *mem;
unsigned long clksel;
int ret;
int ret = 0;
asic = kzalloc(sizeof(struct asic3), GFP_KERNEL);
if (!asic)
if (asic == NULL) {
printk(KERN_ERR "kzalloc failed\n");
return -ENOMEM;
}
spin_lock_init(&asic->lock);
platform_set_drvdata(pdev, asic);
@ -501,49 +548,58 @@ static int asic3_probe(struct platform_device *pdev)
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!mem) {
ret = -ENOMEM;
printk(KERN_ERR "asic3: no MEM resource\n");
goto err_out_1;
dev_err(asic->dev, "no MEM resource\n");
goto out_free;
}
asic->mapping = ioremap(mem->start, PAGE_SIZE);
map_size = mem->end - mem->start + 1;
asic->mapping = ioremap(mem->start, map_size);
if (!asic->mapping) {
ret = -ENOMEM;
printk(KERN_ERR "asic3: couldn't ioremap\n");
goto err_out_1;
dev_err(asic->dev, "Couldn't ioremap\n");
goto out_free;
}
asic->irq_base = pdata->irq_base;
if (pdata && pdata->bus_shift)
asic->bus_shift = 2 - pdata->bus_shift;
else
asic->bus_shift = 0;
/* calculate bus shift from mem resource */
asic->bus_shift = 2 - (map_size >> 12);
clksel = 0;
asic3_write_register(asic, ASIC3_OFFSET(CLOCK, SEL), clksel);
ret = asic3_irq_probe(pdev);
if (ret < 0) {
printk(KERN_ERR "asic3: couldn't probe IRQs\n");
goto err_out_2;
}
asic3_gpio_probe(pdev);
if (pdata->children) {
int i;
for (i = 0; i < pdata->n_children; i++) {
pdata->children[i]->dev.parent = &pdev->dev;
platform_device_register(pdata->children[i]);
}
dev_err(asic->dev, "Couldn't probe IRQs\n");
goto out_unmap;
}
printk(KERN_INFO "ASIC3 Core driver\n");
asic->gpio.base = pdata->gpio_base;
asic->gpio.ngpio = ASIC3_NUM_GPIOS;
asic->gpio.get = asic3_gpio_get;
asic->gpio.set = asic3_gpio_set;
asic->gpio.direction_input = asic3_gpio_direction_input;
asic->gpio.direction_output = asic3_gpio_direction_output;
ret = asic3_gpio_probe(pdev,
pdata->gpio_config,
pdata->gpio_config_num);
if (ret < 0) {
dev_err(asic->dev, "GPIO probe failed\n");
goto out_irq;
}
dev_info(asic->dev, "ASIC3 Core driver\n");
return 0;
err_out_2:
out_irq:
asic3_irq_remove(pdev);
out_unmap:
iounmap(asic->mapping);
err_out_1:
out_free:
kfree(asic);
return ret;
@ -551,9 +607,12 @@ static int asic3_probe(struct platform_device *pdev)
static int asic3_remove(struct platform_device *pdev)
{
int ret;
struct asic3 *asic = platform_get_drvdata(pdev);
asic3_gpio_remove(pdev);
ret = asic3_gpio_remove(pdev);
if (ret < 0)
return ret;
asic3_irq_remove(pdev);
asic3_write_register(asic, ASIC3_OFFSET(CLOCK, SEL), 0);
@ -573,7 +632,6 @@ static struct platform_driver asic3_device_driver = {
.driver = {
.name = "asic3",
},
.probe = asic3_probe,
.remove = __devexit_p(asic3_remove),
.shutdown = asic3_shutdown,
};
@ -581,7 +639,7 @@ static struct platform_driver asic3_device_driver = {
static int __init asic3_init(void)
{
int retval = 0;
retval = platform_driver_register(&asic3_device_driver);
retval = platform_driver_probe(&asic3_device_driver, asic3_probe);
return retval;
}

View File

@ -8,7 +8,7 @@
* published by the Free Software Foundation.
*
* Copyright 2001 Compaq Computer Corporation.
* Copyright 2007 OpendHand.
* Copyright 2007-2008 OpenedHand Ltd.
*/
#ifndef __ASIC3_H__
@ -16,43 +16,22 @@
#include <linux/types.h>
struct asic3 {
void __iomem *mapping;
unsigned int bus_shift;
unsigned int irq_nr;
unsigned int irq_base;
spinlock_t lock;
u16 irq_bothedge[4];
struct device *dev;
};
struct asic3_platform_data {
struct {
u32 dir;
u32 init;
u32 sleep_mask;
u32 sleep_out;
u32 batt_fault_out;
u32 sleep_conf;
u32 alt_function;
} gpio_a, gpio_b, gpio_c, gpio_d;
unsigned int bus_shift;
u16 *gpio_config;
unsigned int gpio_config_num;
unsigned int irq_base;
struct platform_device **children;
unsigned int n_children;
unsigned int gpio_base;
};
int asic3_gpio_get_value(struct asic3 *asic, unsigned gpio);
void asic3_gpio_set_value(struct asic3 *asic, unsigned gpio, int val);
#define ASIC3_NUM_GPIO_BANKS 4
#define ASIC3_GPIOS_PER_BANK 16
#define ASIC3_NUM_GPIOS 64
#define ASIC3_NR_IRQS ASIC3_NUM_GPIOS + 6
#define ASIC3_TO_GPIO(gpio) (NR_BUILTIN_GPIO + (gpio))
#define ASIC3_GPIO_BANK_A 0
#define ASIC3_GPIO_BANK_B 1
#define ASIC3_GPIO_BANK_C 2
@ -64,32 +43,89 @@ void asic3_gpio_set_value(struct asic3 *asic, unsigned gpio, int val);
/* All offsets below are specified with this address bus shift */
#define ASIC3_DEFAULT_ADDR_SHIFT 2
#define ASIC3_OFFSET(base, reg) (ASIC3_##base##_Base + ASIC3_##base##_##reg)
#define ASIC3_OFFSET(base, reg) (ASIC3_##base##_BASE + ASIC3_##base##_##reg)
#define ASIC3_GPIO_OFFSET(base, reg) \
(ASIC3_GPIO_##base##_Base + ASIC3_GPIO_##reg)
(ASIC3_GPIO_##base##_BASE + ASIC3_GPIO_##reg)
#define ASIC3_GPIO_A_Base 0x0000
#define ASIC3_GPIO_B_Base 0x0100
#define ASIC3_GPIO_C_Base 0x0200
#define ASIC3_GPIO_D_Base 0x0300
#define ASIC3_GPIO_A_BASE 0x0000
#define ASIC3_GPIO_B_BASE 0x0100
#define ASIC3_GPIO_C_BASE 0x0200
#define ASIC3_GPIO_D_BASE 0x0300
#define ASIC3_GPIO_Mask 0x00 /* R/W 0:don't mask */
#define ASIC3_GPIO_Direction 0x04 /* R/W 0:input */
#define ASIC3_GPIO_Out 0x08 /* R/W 0:output low */
#define ASIC3_GPIO_TriggerType 0x0c /* R/W 0:level */
#define ASIC3_GPIO_EdgeTrigger 0x10 /* R/W 0:falling */
#define ASIC3_GPIO_LevelTrigger 0x14 /* R/W 0:low level detect */
#define ASIC3_GPIO_SleepMask 0x18 /* R/W 0:don't mask in sleep mode */
#define ASIC3_GPIO_SleepOut 0x1c /* R/W level 0:low in sleep mode */
#define ASIC3_GPIO_BattFaultOut 0x20 /* R/W level 0:low in batt_fault */
#define ASIC3_GPIO_IntStatus 0x24 /* R/W 0:none, 1:detect */
#define ASIC3_GPIO_AltFunction 0x28 /* R/W 1:LED register control */
#define ASIC3_GPIO_SleepConf 0x2c /*
#define ASIC3_GPIO_TO_BANK(gpio) ((gpio) >> 4)
#define ASIC3_GPIO_TO_BIT(gpio) ((gpio) - \
(ASIC3_GPIOS_PER_BANK * ((gpio) >> 4)))
#define ASIC3_GPIO_TO_MASK(gpio) (1 << ASIC3_GPIO_TO_BIT(gpio))
#define ASIC3_GPIO_TO_BASE(gpio) (ASIC3_GPIO_A_BASE + (((gpio) >> 4) * 0x0100))
#define ASIC3_BANK_TO_BASE(bank) (ASIC3_GPIO_A_BASE + ((bank) * 0x100))
#define ASIC3_GPIO_MASK 0x00 /* R/W 0:don't mask */
#define ASIC3_GPIO_DIRECTION 0x04 /* R/W 0:input */
#define ASIC3_GPIO_OUT 0x08 /* R/W 0:output low */
#define ASIC3_GPIO_TRIGGER_TYPE 0x0c /* R/W 0:level */
#define ASIC3_GPIO_EDGE_TRIGGER 0x10 /* R/W 0:falling */
#define ASIC3_GPIO_LEVEL_TRIGGER 0x14 /* R/W 0:low level detect */
#define ASIC3_GPIO_SLEEP_MASK 0x18 /* R/W 0:don't mask in sleep mode */
#define ASIC3_GPIO_SLEEP_OUT 0x1c /* R/W level 0:low in sleep mode */
#define ASIC3_GPIO_BAT_FAULT_OUT 0x20 /* R/W level 0:low in batt_fault */
#define ASIC3_GPIO_INT_STATUS 0x24 /* R/W 0:none, 1:detect */
#define ASIC3_GPIO_ALT_FUNCTION 0x28 /* R/W 1:LED register control */
#define ASIC3_GPIO_SLEEP_CONF 0x2c /*
* R/W bit 1: autosleep
* 0: disable gposlpout in normal mode,
* enable gposlpout in sleep mode.
*/
#define ASIC3_GPIO_Status 0x30 /* R Pin status */
#define ASIC3_GPIO_STATUS 0x30 /* R Pin status */
/*
* ASIC3 GPIO config
*
* Bits 0..6 gpio number
* Bits 7..13 Alternate function
* Bit 14 Direction
* Bit 15 Initial value
*
*/
#define ASIC3_CONFIG_GPIO_PIN(config) ((config) & 0x7f)
#define ASIC3_CONFIG_GPIO_ALT(config) (((config) & (0x7f << 7)) >> 7)
#define ASIC3_CONFIG_GPIO_DIR(config) ((config & (1 << 14)) >> 14)
#define ASIC3_CONFIG_GPIO_INIT(config) ((config & (1 << 15)) >> 15)
#define ASIC3_CONFIG_GPIO(gpio, alt, dir, init) (((gpio) & 0x7f) \
| (((alt) & 0x7f) << 7) | (((dir) & 0x1) << 14) \
| (((init) & 0x1) << 15))
#define ASIC3_CONFIG_GPIO_DEFAULT(gpio, dir, init) \
ASIC3_CONFIG_GPIO((gpio), 0, (dir), (init))
#define ASIC3_CONFIG_GPIO_DEFAULT_OUT(gpio, init) \
ASIC3_CONFIG_GPIO((gpio), 0, 1, (init))
/*
* Alternate functions
*/
#define ASIC3_GPIOA11_PWM0 ASIC3_CONFIG_GPIO(11, 1, 1, 0)
#define ASIC3_GPIOA12_PWM1 ASIC3_CONFIG_GPIO(12, 1, 1, 0)
#define ASIC3_GPIOA15_CONTROL_CX ASIC3_CONFIG_GPIO(15, 1, 1, 0)
#define ASIC3_GPIOC0_LED0 ASIC3_CONFIG_GPIO(32, 1, 1, 0)
#define ASIC3_GPIOC1_LED1 ASIC3_CONFIG_GPIO(33, 1, 1, 0)
#define ASIC3_GPIOC2_LED2 ASIC3_CONFIG_GPIO(34, 1, 1, 0)
#define ASIC3_GPIOC3_SPI_RXD ASIC3_CONFIG_GPIO(35, 1, 0, 0)
#define ASIC3_GPIOC4_CF_nCD ASIC3_CONFIG_GPIO(36, 1, 0, 0)
#define ASIC3_GPIOC4_SPI_TXD ASIC3_CONFIG_GPIO(36, 1, 1, 0)
#define ASIC3_GPIOC5_SPI_CLK ASIC3_CONFIG_GPIO(37, 1, 1, 0)
#define ASIC3_GPIOC5_nCIOW ASIC3_CONFIG_GPIO(37, 1, 1, 0)
#define ASIC3_GPIOC6_nCIOR ASIC3_CONFIG_GPIO(38, 1, 1, 0)
#define ASIC3_GPIOC7_nPCE_1 ASIC3_CONFIG_GPIO(39, 1, 0, 0)
#define ASIC3_GPIOC8_nPCE_2 ASIC3_CONFIG_GPIO(40, 1, 0, 0)
#define ASIC3_GPIOC9_nPOE ASIC3_CONFIG_GPIO(41, 1, 0, 0)
#define ASIC3_GPIOC10_nPWE ASIC3_CONFIG_GPIO(42, 1, 0, 0)
#define ASIC3_GPIOC11_PSKTSEL ASIC3_CONFIG_GPIO(43, 1, 0, 0)
#define ASIC3_GPIOC12_nPREG ASIC3_CONFIG_GPIO(44, 1, 0, 0)
#define ASIC3_GPIOC13_nPWAIT ASIC3_CONFIG_GPIO(45, 1, 1, 0)
#define ASIC3_GPIOC14_nPIOIS16 ASIC3_CONFIG_GPIO(46, 1, 1, 0)
#define ASIC3_GPIOC15_nPIOR ASIC3_CONFIG_GPIO(47, 1, 0, 0)
#define ASIC3_GPIOD11_nCIOIS16 ASIC3_CONFIG_GPIO(59, 1, 0, 0)
#define ASIC3_GPIOD12_nCWAIT ASIC3_CONFIG_GPIO(60, 1, 0, 0)
#define ASIC3_GPIOD15_nPIOW ASIC3_CONFIG_GPIO(63, 1, 0, 0)
#define ASIC3_SPI_Base 0x0400
#define ASIC3_SPI_Control 0x0000
@ -128,7 +164,7 @@ void asic3_gpio_set_value(struct asic3 *asic, unsigned gpio, int val);
#define LED_AUTOSTOP (1 << 5) /* LED ON/OFF auto stop 0:disable, 1:enable */
#define LED_ALWAYS (1 << 6) /* LED Interrupt Mask 0:No mask, 1:mask */
#define ASIC3_CLOCK_Base 0x0A00
#define ASIC3_CLOCK_BASE 0x0A00
#define ASIC3_CLOCK_CDEX 0x00
#define ASIC3_CLOCK_SEL 0x04
@ -159,12 +195,12 @@ void asic3_gpio_set_value(struct asic3 *asic, unsigned gpio, int val);
#define CLOCK_SEL_CX (1 << 2)
#define ASIC3_INTR_Base 0x0B00
#define ASIC3_INTR_BASE 0x0B00
#define ASIC3_INTR_IntMask 0x00 /* Interrupt mask control */
#define ASIC3_INTR_PIntStat 0x04 /* Peripheral interrupt status */
#define ASIC3_INTR_IntCPS 0x08 /* Interrupt timer clock pre-scale */
#define ASIC3_INTR_IntTBS 0x0c /* Interrupt timer set */
#define ASIC3_INTR_INT_MASK 0x00 /* Interrupt mask control */
#define ASIC3_INTR_P_INT_STAT 0x04 /* Peripheral interrupt status */
#define ASIC3_INTR_INT_CPS 0x08 /* Interrupt timer clock pre-scale */
#define ASIC3_INTR_INT_TBS 0x0c /* Interrupt timer set */
#define ASIC3_INTMASK_GINTMASK (1 << 0) /* Global INTs mask 1:enable */
#define ASIC3_INTMASK_GINTEL (1 << 1) /* 1: rising edge, 0: hi level */
@ -227,44 +263,12 @@ void asic3_gpio_set_value(struct asic3 *asic, unsigned gpio, int val);
#define ASIC3_EXTCF_CF_SLEEP (1 << 15) /* CF sleep mode control */
/*********************************************
* The Onewire interface registers
*
* OWM_CMD
* OWM_DAT
* OWM_INTR
* OWM_INTEN
* OWM_CLKDIV
* The Onewire interface (DS1WM) is handled
* by the ds1wm driver.
*
*********************************************/
#define ASIC3_OWM_Base 0xC00
#define ASIC3_OWM_CMD 0x00
#define ASIC3_OWM_DAT 0x04
#define ASIC3_OWM_INTR 0x08
#define ASIC3_OWM_INTEN 0x0C
#define ASIC3_OWM_CLKDIV 0x10
#define ASIC3_OWM_CMD_ONEWR (1 << 0)
#define ASIC3_OWM_CMD_SRA (1 << 1)
#define ASIC3_OWM_CMD_DQO (1 << 2)
#define ASIC3_OWM_CMD_DQI (1 << 3)
#define ASIC3_OWM_INTR_PD (1 << 0)
#define ASIC3_OWM_INTR_PDR (1 << 1)
#define ASIC3_OWM_INTR_TBE (1 << 2)
#define ASIC3_OWM_INTR_TEMP (1 << 3)
#define ASIC3_OWM_INTR_RBF (1 << 4)
#define ASIC3_OWM_INTEN_EPD (1 << 0)
#define ASIC3_OWM_INTEN_IAS (1 << 1)
#define ASIC3_OWM_INTEN_ETBE (1 << 2)
#define ASIC3_OWM_INTEN_ETMT (1 << 3)
#define ASIC3_OWM_INTEN_ERBF (1 << 4)
#define ASIC3_OWM_CLKDIV_PRE (3 << 0) /* two bits wide at bit 0 */
#define ASIC3_OWM_CLKDIV_DIV (7 << 2) /* 3 bits wide at bit 2 */
#define ASIC3_OWM_BASE 0xC00
/*****************************************************************************
* The SD configuration registers are at a completely different location
@ -492,6 +496,7 @@ void asic3_gpio_set_value(struct asic3 *asic, unsigned gpio, int val);
#define ASIC3_SDIO_CTRL_LEDCtrl 0x7C
#define ASIC3_SDIO_CTRL_SoftwareReset 0x1C0
#define ASIC3_MAP_SIZE 0x2000
#define ASIC3_MAP_SIZE_32BIT 0x2000
#define ASIC3_MAP_SIZE_16BIT 0x1000
#endif /* __ASIC3_H__ */