Merge branch 'clockevents/4.20-rc1' of https://git.linaro.org/people/daniel.lezcano/linux into timers/urgent

Pull clockevent update from Daniel Lezcano:

 - Add the per cpu timer for the c-sky architecture (Guo Ren)

 - Add the global timer for the c-sky architecture (Guo Ren)
This commit is contained in:
Thomas Gleixner 2018-11-02 21:58:39 +01:00
commit bff9a1076a
7 changed files with 432 additions and 0 deletions

View File

@ -0,0 +1,42 @@
=================
gx6605s SOC Timer
=================
The timer is used in gx6605s soc as system timer and the driver
contain clk event and clk source.
==============================
timer node bindings definition
==============================
Description: Describes gx6605s SOC timer
PROPERTIES
- compatible
Usage: required
Value type: <string>
Definition: must be "csky,gx6605s-timer"
- reg
Usage: required
Value type: <u32 u32>
Definition: <phyaddr size> in soc from cpu view
- clocks
Usage: required
Value type: phandle + clock specifier cells
Definition: must be input clk node
- interrupt
Usage: required
Value type: <u32>
Definition: must be timer irq num defined by soc
Examples:
---------
timer0: timer@20a000 {
compatible = "csky,gx6605s-timer";
reg = <0x0020a000 0x400>;
clocks = <&dummy_apb_clk>;
interrupts = <10>;
interrupt-parent = <&intc>;
};

View File

@ -0,0 +1,42 @@
============================
C-SKY Multi-processors Timer
============================
C-SKY multi-processors timer is designed for C-SKY SMP system and the
regs is accessed by cpu co-processor 4 registers with mtcr/mfcr.
- PTIM_CTLR "cr<0, 14>" Control reg to start reset timer.
- PTIM_TSR "cr<1, 14>" Interrupt cleanup status reg.
- PTIM_CCVR "cr<3, 14>" Current counter value reg.
- PTIM_LVR "cr<6, 14>" Window value reg to triger next event.
==============================
timer node bindings definition
==============================
Description: Describes SMP timer
PROPERTIES
- compatible
Usage: required
Value type: <string>
Definition: must be "csky,mptimer"
- clocks
Usage: required
Value type: <node>
Definition: must be input clk node
- interrupts
Usage: required
Value type: <u32>
Definition: must be timer irq num defined by soc
Examples:
---------
timer: timer {
compatible = "csky,mptimer";
clocks = <&dummy_apb_clk>;
interrupts = <16>;
interrupt-parent = <&intc>;
};

View File

@ -620,4 +620,22 @@ config RISCV_TIMER
is accessed via both the SBI and the rdcycle instruction. This is
required for all RISC-V systems.
config CSKY_MP_TIMER
bool "SMP Timer for the C-SKY platform" if COMPILE_TEST
depends on CSKY
select TIMER_OF
help
Say yes here to enable C-SKY SMP timer driver used for C-SKY SMP
system.
csky,mptimer is not only used in SMP system, it also could be used
single core system. It's not a mmio reg and it use mtcr/mfcr instruction.
config GX6605S_TIMER
bool "Gx6605s SOC system timer driver" if COMPILE_TEST
depends on CSKY
select CLKSRC_MMIO
select TIMER_OF
help
This option enables support for gx6605s SOC's timer.
endmenu

View File

@ -79,3 +79,5 @@ obj-$(CONFIG_CLKSRC_ST_LPC) += clksrc_st_lpc.o
obj-$(CONFIG_X86_NUMACHIP) += numachip.o
obj-$(CONFIG_ATCPIT100_TIMER) += timer-atcpit100.o
obj-$(CONFIG_RISCV_TIMER) += riscv_timer.o
obj-$(CONFIG_CSKY_MP_TIMER) += timer-mp-csky.o
obj-$(CONFIG_GX6605S_TIMER) += timer-gx6605s.o

View File

@ -0,0 +1,154 @@
// SPDX-License-Identifier: GPL-2.0
// Copyright (C) 2018 Hangzhou C-SKY Microsystems co.,ltd.
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/sched_clock.h>
#include "timer-of.h"
#define CLKSRC_OFFSET 0x40
#define TIMER_STATUS 0x00
#define TIMER_VALUE 0x04
#define TIMER_CONTRL 0x10
#define TIMER_CONFIG 0x20
#define TIMER_DIV 0x24
#define TIMER_INI 0x28
#define GX6605S_STATUS_CLR BIT(0)
#define GX6605S_CONTRL_RST BIT(0)
#define GX6605S_CONTRL_START BIT(1)
#define GX6605S_CONFIG_EN BIT(0)
#define GX6605S_CONFIG_IRQ_EN BIT(1)
static irqreturn_t gx6605s_timer_interrupt(int irq, void *dev)
{
struct clock_event_device *ce = dev;
void __iomem *base = timer_of_base(to_timer_of(ce));
writel_relaxed(GX6605S_STATUS_CLR, base + TIMER_STATUS);
ce->event_handler(ce);
return IRQ_HANDLED;
}
static int gx6605s_timer_set_oneshot(struct clock_event_device *ce)
{
void __iomem *base = timer_of_base(to_timer_of(ce));
/* reset and stop counter */
writel_relaxed(GX6605S_CONTRL_RST, base + TIMER_CONTRL);
/* enable with irq and start */
writel_relaxed(GX6605S_CONFIG_EN | GX6605S_CONFIG_IRQ_EN,
base + TIMER_CONFIG);
return 0;
}
static int gx6605s_timer_set_next_event(unsigned long delta,
struct clock_event_device *ce)
{
void __iomem *base = timer_of_base(to_timer_of(ce));
/* use reset to pause timer */
writel_relaxed(GX6605S_CONTRL_RST, base + TIMER_CONTRL);
/* config next timeout value */
writel_relaxed(ULONG_MAX - delta, base + TIMER_INI);
writel_relaxed(GX6605S_CONTRL_START, base + TIMER_CONTRL);
return 0;
}
static int gx6605s_timer_shutdown(struct clock_event_device *ce)
{
void __iomem *base = timer_of_base(to_timer_of(ce));
writel_relaxed(0, base + TIMER_CONTRL);
writel_relaxed(0, base + TIMER_CONFIG);
return 0;
}
static struct timer_of to = {
.flags = TIMER_OF_IRQ | TIMER_OF_BASE | TIMER_OF_CLOCK,
.clkevt = {
.rating = 300,
.features = CLOCK_EVT_FEAT_DYNIRQ |
CLOCK_EVT_FEAT_ONESHOT,
.set_state_shutdown = gx6605s_timer_shutdown,
.set_state_oneshot = gx6605s_timer_set_oneshot,
.set_next_event = gx6605s_timer_set_next_event,
.cpumask = cpu_possible_mask,
},
.of_irq = {
.handler = gx6605s_timer_interrupt,
.flags = IRQF_TIMER | IRQF_IRQPOLL,
},
};
static u64 notrace gx6605s_sched_clock_read(void)
{
void __iomem *base;
base = timer_of_base(&to) + CLKSRC_OFFSET;
return (u64)readl_relaxed(base + TIMER_VALUE);
}
static void gx6605s_clkevt_init(void __iomem *base)
{
writel_relaxed(0, base + TIMER_DIV);
writel_relaxed(0, base + TIMER_CONFIG);
clockevents_config_and_register(&to.clkevt, timer_of_rate(&to), 2,
ULONG_MAX);
}
static int gx6605s_clksrc_init(void __iomem *base)
{
writel_relaxed(0, base + TIMER_DIV);
writel_relaxed(0, base + TIMER_INI);
writel_relaxed(GX6605S_CONTRL_RST, base + TIMER_CONTRL);
writel_relaxed(GX6605S_CONFIG_EN, base + TIMER_CONFIG);
writel_relaxed(GX6605S_CONTRL_START, base + TIMER_CONTRL);
sched_clock_register(gx6605s_sched_clock_read, 32, timer_of_rate(&to));
return clocksource_mmio_init(base + TIMER_VALUE, "gx6605s",
timer_of_rate(&to), 200, 32, clocksource_mmio_readl_up);
}
static int __init gx6605s_timer_init(struct device_node *np)
{
int ret;
/*
* The timer driver is for nationalchip gx6605s SOC and there are two
* same timer in gx6605s. We use one for clkevt and another for clksrc.
*
* The timer is mmio map to access, so we need give mmio address in dts.
*
* It provides a 32bit countup timer and interrupt will be caused by
* count-overflow.
* So we need set-next-event by ULONG_MAX - delta in TIMER_INI reg.
*
* The counter at 0x0 offset is clock event.
* The counter at 0x40 offset is clock source.
* They are the same in hardware, just different used by driver.
*/
ret = timer_of_init(np, &to);
if (ret)
return ret;
gx6605s_clkevt_init(timer_of_base(&to));
return gx6605s_clksrc_init(timer_of_base(&to) + CLKSRC_OFFSET);
}
TIMER_OF_DECLARE(csky_gx6605s_timer, "csky,gx6605s-timer", gx6605s_timer_init);

View File

@ -0,0 +1,173 @@
// SPDX-License-Identifier: GPL-2.0
// Copyright (C) 2018 Hangzhou C-SKY Microsystems co.,ltd.
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/sched_clock.h>
#include <linux/cpu.h>
#include <linux/of_irq.h>
#include <asm/reg_ops.h>
#include "timer-of.h"
#define PTIM_CCVR "cr<3, 14>"
#define PTIM_CTLR "cr<0, 14>"
#define PTIM_LVR "cr<6, 14>"
#define PTIM_TSR "cr<1, 14>"
static int csky_mptimer_irq;
static int csky_mptimer_set_next_event(unsigned long delta,
struct clock_event_device *ce)
{
mtcr(PTIM_LVR, delta);
return 0;
}
static int csky_mptimer_shutdown(struct clock_event_device *ce)
{
mtcr(PTIM_CTLR, 0);
return 0;
}
static int csky_mptimer_oneshot(struct clock_event_device *ce)
{
mtcr(PTIM_CTLR, 1);
return 0;
}
static int csky_mptimer_oneshot_stopped(struct clock_event_device *ce)
{
mtcr(PTIM_CTLR, 0);
return 0;
}
static DEFINE_PER_CPU(struct timer_of, csky_to) = {
.flags = TIMER_OF_CLOCK,
.clkevt = {
.rating = 300,
.features = CLOCK_EVT_FEAT_PERCPU |
CLOCK_EVT_FEAT_ONESHOT,
.set_state_shutdown = csky_mptimer_shutdown,
.set_state_oneshot = csky_mptimer_oneshot,
.set_state_oneshot_stopped = csky_mptimer_oneshot_stopped,
.set_next_event = csky_mptimer_set_next_event,
},
};
static irqreturn_t csky_timer_interrupt(int irq, void *dev)
{
struct timer_of *to = this_cpu_ptr(&csky_to);
mtcr(PTIM_TSR, 0);
to->clkevt.event_handler(&to->clkevt);
return IRQ_HANDLED;
}
/*
* clock event for percpu
*/
static int csky_mptimer_starting_cpu(unsigned int cpu)
{
struct timer_of *to = per_cpu_ptr(&csky_to, cpu);
to->clkevt.cpumask = cpumask_of(cpu);
clockevents_config_and_register(&to->clkevt, timer_of_rate(to),
2, ULONG_MAX);
enable_percpu_irq(csky_mptimer_irq, 0);
return 0;
}
static int csky_mptimer_dying_cpu(unsigned int cpu)
{
disable_percpu_irq(csky_mptimer_irq);
return 0;
}
/*
* clock source
*/
static u64 sched_clock_read(void)
{
return (u64)mfcr(PTIM_CCVR);
}
static u64 clksrc_read(struct clocksource *c)
{
return (u64)mfcr(PTIM_CCVR);
}
struct clocksource csky_clocksource = {
.name = "csky",
.rating = 400,
.mask = CLOCKSOURCE_MASK(32),
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
.read = clksrc_read,
};
static int __init csky_mptimer_init(struct device_node *np)
{
int ret, cpu, cpu_rollback;
struct timer_of *to = NULL;
/*
* Csky_mptimer is designed for C-SKY SMP multi-processors and
* every core has it's own private irq and regs for clkevt and
* clksrc.
*
* The regs is accessed by cpu instruction: mfcr/mtcr instead of
* mmio map style. So we needn't mmio-address in dts, but we still
* need to give clk and irq number.
*
* We use private irq for the mptimer and irq number is the same
* for every core. So we use request_percpu_irq() in timer_of_init.
*/
csky_mptimer_irq = irq_of_parse_and_map(np, 0);
if (csky_mptimer_irq <= 0)
return -EINVAL;
ret = request_percpu_irq(csky_mptimer_irq, csky_timer_interrupt,
"csky_mp_timer", &csky_to);
if (ret)
return -EINVAL;
for_each_possible_cpu(cpu) {
to = per_cpu_ptr(&csky_to, cpu);
ret = timer_of_init(np, to);
if (ret)
goto rollback;
}
clocksource_register_hz(&csky_clocksource, timer_of_rate(to));
sched_clock_register(sched_clock_read, 32, timer_of_rate(to));
ret = cpuhp_setup_state(CPUHP_AP_CSKY_TIMER_STARTING,
"clockevents/csky/timer:starting",
csky_mptimer_starting_cpu,
csky_mptimer_dying_cpu);
if (ret)
return -EINVAL;
return 0;
rollback:
for_each_possible_cpu(cpu_rollback) {
if (cpu_rollback == cpu)
break;
to = per_cpu_ptr(&csky_to, cpu_rollback);
timer_of_cleanup(to);
}
return -EINVAL;
}
TIMER_OF_DECLARE(csky_mptimer, "csky,mptimer", csky_mptimer_init);

View File

@ -126,6 +126,7 @@ enum cpuhp_state {
CPUHP_AP_MIPS_GIC_TIMER_STARTING,
CPUHP_AP_ARC_TIMER_STARTING,
CPUHP_AP_RISCV_TIMER_STARTING,
CPUHP_AP_CSKY_TIMER_STARTING,
CPUHP_AP_KVM_STARTING,
CPUHP_AP_KVM_ARM_VGIC_INIT_STARTING,
CPUHP_AP_KVM_ARM_VGIC_STARTING,