regulator: Updates for v4.13

A quiet release for the regulator API, a series of fairly small fixes
 plus one new feature and a few new drivers:
 
  - Support for regulators with different settling times for rising and
    falling voltage changes.
  - New drivers for Allwinner AXP803, HiSilicon HI6421V530 and TI
    LP87565.
 -----BEGIN PGP SIGNATURE-----
 
 iQFHBAABCAAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAllbr7oTHGJyb29uaWVA
 a2VybmVsLm9yZwAKCRAk1otyXVSH0E90B/9q4yTZ03ztMZT+CdKq8tZOgvt9OXqx
 XMrcny2cdFm5uXSY3zXGpFwiMTMgsyt2oypQrGLYQxiH6aAvAwD1blygeaIOK77I
 uoZBAGAH4oc4LySu5lmzozCM1ao1CaiTEdsBb/yjG13pKI24aFxLPL5SZfiyzXs8
 EY2QCiAC4FkMJYEERcHb3Mk2Nhsm99Iy533gr6wgToQF4REwGVM8kIwTKftQ/8N5
 OEKycgg2r9G2zTXR6S5m/yArHzaqPdJUu6HF4DG2wmgTiNURbm87I3u1z7NAEYzj
 KoyiMn9D1OpMootUMEQo8RQPhH6n8q6OWvHcrpRbmatA7pmQ+b/lt4vr
 =9LJp
 -----END PGP SIGNATURE-----

Merge tag 'regulator-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator updates from Mark Brown:
 "A quiet release for the regulator API, a series of fairly small fixes
  plus one new feature and a few new drivers:

   - Support for regulators with different settling times for rising and
     falling voltage changes.

   - New drivers for Allwinner AXP803, HiSilicon HI6421V530 and TI
     LP87565"

* tag 'regulator-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (21 commits)
  regulator: core: Fix size limit of supply_map
  regulator: core: Fix voltage change propagations to supply regulators
  regulator: lp87565: Fix the initial voltage range
  regulator: tps65910: wire up sleep control configuration
  regulator: hi6421v530: Describe consumed platform device
  regulator: tps65910: check TPS65910_NUM_REGS at build time
  regulator: core: Prioritise consumer mappings over regulator name
  regulator: lp87565: Fix the GPL header
  regulator: hi6421: Describe consumed platform device
  regulator: hi6421v530: add driver for hi6421v530 voltage regulator
  regulator: da9061: BUCK and LDO regulator driver
  regulator: bd9571mwv: Statize local symbols
  regulator: tps65917: Add support for SMPS12
  regulator: lp87565: Add support for lp87565 PMIC regulators
  regulator: axp20x-regulator: add support for AXP803
  regulator: lp8755: fix spelling mistake "acceess" -> "access"
  regulator: Allow for asymmetric settling times
  regulator: DT: Add properties for asymmetric settling times
  regulator: palmas: Drop unnecessary static
  MAINTAINERS: Update MAX77802 PMIC entry
  ...
This commit is contained in:
Linus Torvalds 2017-07-04 11:55:21 -07:00
commit d62eb5edf6
22 changed files with 1058 additions and 102 deletions

View File

@ -61,6 +61,10 @@ Optional properties:
There should be 9 entries here, one for each gpio.
- ti,system-power-controller: Telling whether or not this pmic is controlling
the system power.
- ti,sleep-enable: Enable SLEEP state.
- ti,sleep-keep-therm: Keep thermal monitoring on in sleep state.
- ti,sleep-keep-ck32k: Keep the 32KHz clock output on in sleep state.
- ti,sleep-keep-hsclk: Keep high speed internal clock on in sleep state.
Regulator Optional properties:
- ti,regulator-ext-sleep-control: enable external sleep

View File

@ -24,6 +24,14 @@ Optional properties:
- regulator-settling-time-us: Settling time, in microseconds, for voltage
change if regulator have the constant time for any level voltage change.
This is useful when regulator have exponential voltage change.
- regulator-settling-time-up-us: Settling time, in microseconds, for voltage
increase if the regulator needs a constant time to settle after voltage
increases of any level. This is useful for regulators with exponential
voltage changes.
- regulator-settling-time-down-us: Settling time, in microseconds, for voltage
decrease if the regulator needs a constant time to settle after voltage
decreases of any level. This is useful for regulators with exponential
voltage changes.
- regulator-soft-start: Enable soft start so that voltage ramps slowly
- regulator-state-mem sub-root node for Suspend-to-RAM mode
: suspend to memory, the device goes to sleep, but all data stored in memory,

View File

@ -8076,11 +8076,11 @@ S: Supported
F: drivers/power/supply/max14577_charger.c
F: drivers/power/supply/max77693_charger.c
MAXIM MAX77802 MULTIFUNCTION PMIC DEVICE DRIVERS
M: Javier Martinez Canillas <javier@osg.samsung.com>
MAXIM MAX77802 PMIC REGULATOR DEVICE DRIVER
M: Javier Martinez Canillas <javier@dowhile0.org>
L: linux-kernel@vger.kernel.org
S: Supported
F: drivers/*/*max77802*.c
F: drivers/regulator/max77802-regulator.c
F: Documentation/devicetree/bindings/*/*max77802.txt
F: include/dt-bindings/*/*max77802.h

View File

@ -328,11 +328,7 @@ static int tps65910_sleepinit(struct tps65910 *tps65910,
goto err_sleep_init;
}
/* Return if there is no sleep keepon data. */
if (!pmic_pdata->slp_keepon)
return 0;
if (pmic_pdata->slp_keepon->therm_keepon) {
if (pmic_pdata->slp_keepon.therm_keepon) {
ret = tps65910_reg_set_bits(tps65910,
TPS65910_SLEEP_KEEP_RES_ON,
SLEEP_KEEP_RES_ON_THERM_KEEPON_MASK);
@ -342,7 +338,7 @@ static int tps65910_sleepinit(struct tps65910 *tps65910,
}
}
if (pmic_pdata->slp_keepon->clkout32k_keepon) {
if (pmic_pdata->slp_keepon.clkout32k_keepon) {
ret = tps65910_reg_set_bits(tps65910,
TPS65910_SLEEP_KEEP_RES_ON,
SLEEP_KEEP_RES_ON_CLKOUT32K_KEEPON_MASK);
@ -352,7 +348,7 @@ static int tps65910_sleepinit(struct tps65910 *tps65910,
}
}
if (pmic_pdata->slp_keepon->i2chs_keepon) {
if (pmic_pdata->slp_keepon.i2chs_keepon) {
ret = tps65910_reg_set_bits(tps65910,
TPS65910_SLEEP_KEEP_RES_ON,
SLEEP_KEEP_RES_ON_I2CHS_KEEPON_MASK);
@ -415,6 +411,18 @@ static struct tps65910_board *tps65910_parse_dt(struct i2c_client *client,
prop = of_property_read_bool(np, "ti,en-ck32k-xtal");
board_info->en_ck32k_xtal = prop;
prop = of_property_read_bool(np, "ti,sleep-enable");
board_info->en_dev_slp = prop;
prop = of_property_read_bool(np, "ti,sleep-keep-therm");
board_info->slp_keepon.therm_keepon = prop;
prop = of_property_read_bool(np, "ti,sleep-keep-ck32k");
board_info->slp_keepon.clkout32k_keepon = prop;
prop = of_property_read_bool(np, "ti,sleep-keep-hsclk");
board_info->slp_keepon.i2chs_keepon = prop;
board_info->irq = client->irq;
board_info->irq_base = -1;
board_info->pm_off = of_property_read_bool(np,

View File

@ -214,11 +214,11 @@ config REGULATOR_DA9055
will be called da9055-regulator.
config REGULATOR_DA9062
tristate "Dialog Semiconductor DA9062 regulators"
tristate "Dialog Semiconductor DA9061/62 regulators"
depends on MFD_DA9062
help
Say y here to support the BUCKs and LDOs regulators found on
DA9062 PMICs.
DA9061 and DA9062 PMICs.
This driver can also be built as a module. If so, the module
will be called da9062-regulator.
@ -296,6 +296,16 @@ config REGULATOR_HI6421
21 general purpose LDOs, 3 dedicated LDOs, and 5 BUCKs. All
of them come with support to either ECO (idle) or sleep mode.
config REGULATOR_HI6421V530
tristate "HiSilicon Hi6421v530 PMIC voltage regulator support"
depends on MFD_HI6421_PMIC && OF
help
This driver provides support for the voltage regulators on
HiSilicon Hi6421v530 PMU / Codec IC.
Hi6421v530 is a multi-function device which, on regulator part,
provides 5 general purpose LDOs, and all of them come with support
to either ECO (idle) or sleep mode.
config REGULATOR_HI655X
tristate "Hisilicon HI655X PMIC regulators support"
depends on ARCH_HISI || COMPILE_TEST
@ -365,6 +375,14 @@ config REGULATOR_LP8755
chip contains six step-down DC/DC converters which can support
9 mode multiphase configuration.
config REGULATOR_LP87565
tristate "TI LP87565 Power regulators"
depends on MFD_TI_LP87565 && OF
help
This driver supports LP87565 voltage regulator chips. LP87565
provides four step-down converters. It supports software based
voltage control for different voltage domains
config REGULATOR_LP8788
tristate "TI LP8788 Power Regulators"
depends on MFD_LP8788

View File

@ -38,6 +38,7 @@ obj-$(CONFIG_REGULATOR_DB8500_PRCMU) += db8500-prcmu.o
obj-$(CONFIG_REGULATOR_FAN53555) += fan53555.o
obj-$(CONFIG_REGULATOR_GPIO) += gpio-regulator.o
obj-$(CONFIG_REGULATOR_HI6421) += hi6421-regulator.o
obj-$(CONFIG_REGULATOR_HI6421V530) += hi6421v530-regulator.o
obj-$(CONFIG_REGULATOR_HI655X) += hi655x-regulator.o
obj-$(CONFIG_REGULATOR_ISL6271A) += isl6271a-regulator.o
obj-$(CONFIG_REGULATOR_ISL9305) += isl9305.o
@ -46,6 +47,7 @@ obj-$(CONFIG_REGULATOR_LP3971) += lp3971.o
obj-$(CONFIG_REGULATOR_LP3972) += lp3972.o
obj-$(CONFIG_REGULATOR_LP872X) += lp872x.o
obj-$(CONFIG_REGULATOR_LP873X) += lp873x-regulator.o
obj-$(CONFIG_REGULATOR_LP87565) += lp87565-regulator.o
obj-$(CONFIG_REGULATOR_LP8788) += lp8788-buck.o
obj-$(CONFIG_REGULATOR_LP8788) += lp8788-ldo.o
obj-$(CONFIG_REGULATOR_LP8755) += lp8755.o

View File

@ -244,6 +244,82 @@ static const struct regulator_desc axp22x_drivevbus_regulator = {
.ops = &axp20x_ops_sw,
};
static const struct regulator_linear_range axp803_dcdc234_ranges[] = {
REGULATOR_LINEAR_RANGE(500000, 0x0, 0x46, 10000),
REGULATOR_LINEAR_RANGE(1220000, 0x47, 0x4b, 20000),
};
static const struct regulator_linear_range axp803_dcdc5_ranges[] = {
REGULATOR_LINEAR_RANGE(800000, 0x0, 0x20, 10000),
REGULATOR_LINEAR_RANGE(1140000, 0x21, 0x44, 20000),
};
static const struct regulator_linear_range axp803_dcdc6_ranges[] = {
REGULATOR_LINEAR_RANGE(600000, 0x0, 0x32, 10000),
REGULATOR_LINEAR_RANGE(1120000, 0x33, 0x47, 20000),
};
/* AXP806's CLDO2 and AXP809's DLDO1 shares the same range */
static const struct regulator_linear_range axp803_dldo2_ranges[] = {
REGULATOR_LINEAR_RANGE(700000, 0x0, 0x1a, 100000),
REGULATOR_LINEAR_RANGE(3400000, 0x1b, 0x1f, 200000),
};
static const struct regulator_desc axp803_regulators[] = {
AXP_DESC(AXP803, DCDC1, "dcdc1", "vin1", 1600, 3400, 100,
AXP803_DCDC1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL1, BIT(0)),
AXP_DESC_RANGES(AXP803, DCDC2, "dcdc2", "vin2", axp803_dcdc234_ranges,
76, AXP803_DCDC2_V_OUT, 0x7f, AXP22X_PWR_OUT_CTRL1,
BIT(1)),
AXP_DESC_RANGES(AXP803, DCDC3, "dcdc3", "vin3", axp803_dcdc234_ranges,
76, AXP803_DCDC3_V_OUT, 0x7f, AXP22X_PWR_OUT_CTRL1,
BIT(2)),
AXP_DESC_RANGES(AXP803, DCDC4, "dcdc4", "vin4", axp803_dcdc234_ranges,
76, AXP803_DCDC4_V_OUT, 0x7f, AXP22X_PWR_OUT_CTRL1,
BIT(3)),
AXP_DESC_RANGES(AXP803, DCDC5, "dcdc5", "vin5", axp803_dcdc5_ranges,
68, AXP803_DCDC5_V_OUT, 0x7f, AXP22X_PWR_OUT_CTRL1,
BIT(4)),
AXP_DESC_RANGES(AXP803, DCDC6, "dcdc6", "vin6", axp803_dcdc6_ranges,
72, AXP803_DCDC6_V_OUT, 0x7f, AXP22X_PWR_OUT_CTRL1,
BIT(5)),
/* secondary switchable output of DCDC1 */
AXP_DESC_SW(AXP803, DC1SW, "dc1sw", NULL, AXP22X_PWR_OUT_CTRL2,
BIT(7)),
AXP_DESC(AXP803, ALDO1, "aldo1", "aldoin", 700, 3300, 100,
AXP22X_ALDO1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL3, BIT(5)),
AXP_DESC(AXP803, ALDO2, "aldo2", "aldoin", 700, 3300, 100,
AXP22X_ALDO2_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL3, BIT(6)),
AXP_DESC(AXP803, ALDO3, "aldo3", "aldoin", 700, 3300, 100,
AXP22X_ALDO3_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL3, BIT(7)),
AXP_DESC(AXP803, DLDO1, "dldo1", "dldoin", 700, 3300, 100,
AXP22X_DLDO1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(3)),
AXP_DESC_RANGES(AXP803, DLDO2, "dldo2", "dldoin", axp803_dldo2_ranges,
32, AXP22X_DLDO2_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2,
BIT(4)),
AXP_DESC(AXP803, DLDO3, "dldo3", "dldoin", 700, 3300, 100,
AXP22X_DLDO3_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(5)),
AXP_DESC(AXP803, DLDO4, "dldo4", "dldoin", 700, 3300, 100,
AXP22X_DLDO4_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(6)),
AXP_DESC(AXP803, ELDO1, "eldo1", "eldoin", 700, 1900, 50,
AXP22X_ELDO1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(0)),
AXP_DESC(AXP803, ELDO2, "eldo2", "eldoin", 700, 1900, 50,
AXP22X_ELDO2_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(1)),
AXP_DESC(AXP803, ELDO3, "eldo3", "eldoin", 700, 1900, 50,
AXP22X_ELDO3_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(2)),
AXP_DESC(AXP803, FLDO1, "fldo1", "fldoin", 700, 1450, 50,
AXP803_FLDO1_V_OUT, 0x0f, AXP22X_PWR_OUT_CTRL3, BIT(2)),
AXP_DESC(AXP803, FLDO2, "fldo2", "fldoin", 700, 1450, 50,
AXP803_FLDO2_V_OUT, 0x0f, AXP22X_PWR_OUT_CTRL3, BIT(3)),
AXP_DESC_IO(AXP803, LDO_IO0, "ldo-io0", "ips", 700, 3300, 100,
AXP22X_LDO_IO0_V_OUT, 0x1f, AXP20X_GPIO0_CTRL, 0x07,
AXP22X_IO_ENABLED, AXP22X_IO_DISABLED),
AXP_DESC_IO(AXP803, LDO_IO1, "ldo-io1", "ips", 700, 3300, 100,
AXP22X_LDO_IO1_V_OUT, 0x1f, AXP20X_GPIO1_CTRL, 0x07,
AXP22X_IO_ENABLED, AXP22X_IO_DISABLED),
AXP_DESC_FIXED(AXP803, RTC_LDO, "rtc-ldo", "ips", 3000),
};
static const struct regulator_linear_range axp806_dcdca_ranges[] = {
REGULATOR_LINEAR_RANGE(600000, 0x0, 0x32, 10000),
REGULATOR_LINEAR_RANGE(1120000, 0x33, 0x47, 20000),
@ -254,11 +330,6 @@ static const struct regulator_linear_range axp806_dcdcd_ranges[] = {
REGULATOR_LINEAR_RANGE(1600000, 0x2e, 0x3f, 100000),
};
static const struct regulator_linear_range axp806_cldo2_ranges[] = {
REGULATOR_LINEAR_RANGE(700000, 0x0, 0x1a, 100000),
REGULATOR_LINEAR_RANGE(3400000, 0x1b, 0x1f, 200000),
};
static const struct regulator_desc axp806_regulators[] = {
AXP_DESC_RANGES(AXP806, DCDCA, "dcdca", "vina", axp806_dcdca_ranges,
72, AXP806_DCDCA_V_CTRL, 0x7f, AXP806_PWR_OUT_CTRL1,
@ -289,7 +360,7 @@ static const struct regulator_desc axp806_regulators[] = {
AXP806_BLDO4_V_CTRL, 0x0f, AXP806_PWR_OUT_CTRL2, BIT(3)),
AXP_DESC(AXP806, CLDO1, "cldo1", "cldoin", 700, 3300, 100,
AXP806_CLDO1_V_CTRL, 0x1f, AXP806_PWR_OUT_CTRL2, BIT(4)),
AXP_DESC_RANGES(AXP806, CLDO2, "cldo2", "cldoin", axp806_cldo2_ranges,
AXP_DESC_RANGES(AXP806, CLDO2, "cldo2", "cldoin", axp803_dldo2_ranges,
32, AXP806_CLDO2_V_CTRL, 0x1f, AXP806_PWR_OUT_CTRL2,
BIT(5)),
AXP_DESC(AXP806, CLDO3, "cldo3", "cldoin", 700, 3300, 100,
@ -326,7 +397,7 @@ static const struct regulator_desc axp809_regulators[] = {
AXP22X_ALDO2_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL1, BIT(7)),
AXP_DESC(AXP809, ALDO3, "aldo3", "aldoin", 700, 3300, 100,
AXP22X_ALDO3_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(5)),
AXP_DESC_RANGES(AXP809, DLDO1, "dldo1", "dldoin", axp806_cldo2_ranges,
AXP_DESC_RANGES(AXP809, DLDO1, "dldo1", "dldoin", axp803_dldo2_ranges,
32, AXP22X_DLDO1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2,
BIT(3)),
AXP_DESC(AXP809, DLDO2, "dldo2", "dldoin", 700, 3300, 100,
@ -369,14 +440,21 @@ static int axp20x_set_dcdc_freq(struct platform_device *pdev, u32 dcdcfreq)
def = 1500;
step = 75;
break;
case AXP806_ID:
case AXP803_ID:
/*
* AXP806 DCDC work frequency setting has the same range and
* AXP803 DCDC work frequency setting has the same range and
* step as AXP22X, but at a different register.
* Fall through to the check below.
* (See include/linux/mfd/axp20x.h)
*/
reg = AXP806_DCDC_FREQ_CTRL;
reg = AXP803_DCDC_FREQ_CTRL;
case AXP806_ID:
/*
* AXP806 also have DCDC work frequency setting register at a
* different position.
*/
if (axp20x->variant == AXP806_ID)
reg = AXP806_DCDC_FREQ_CTRL;
case AXP221_ID:
case AXP223_ID:
case AXP809_ID:
@ -475,6 +553,14 @@ static int axp20x_set_dcdc_workmode(struct regulator_dev *rdev, int id, u32 work
workmode <<= id - AXP22X_DCDC1;
break;
case AXP803_ID:
if (id < AXP803_DCDC1 || id > AXP803_DCDC6)
return -EINVAL;
mask = AXP22X_WORKMODE_DCDCX_MASK(id - AXP803_DCDC1);
workmode <<= id - AXP803_DCDC1;
break;
default:
/* should not happen */
WARN_ON(1);
@ -492,20 +578,38 @@ static bool axp20x_is_polyphase_slave(struct axp20x_dev *axp20x, int id)
{
u32 reg = 0;
/* Only AXP806 has poly-phase outputs */
if (axp20x->variant != AXP806_ID)
/*
* Currently in our supported AXP variants, only AXP803 and AXP806
* have polyphase regulators.
*/
switch (axp20x->variant) {
case AXP803_ID:
regmap_read(axp20x->regmap, AXP803_POLYPHASE_CTRL, &reg);
switch (id) {
case AXP803_DCDC3:
return !!(reg & BIT(6));
case AXP803_DCDC6:
return !!(reg & BIT(7));
}
break;
case AXP806_ID:
regmap_read(axp20x->regmap, AXP806_DCDC_MODE_CTRL2, &reg);
switch (id) {
case AXP806_DCDCB:
return (((reg & GENMASK(7, 6)) == BIT(6)) ||
((reg & GENMASK(7, 6)) == BIT(7)));
case AXP806_DCDCC:
return ((reg & GENMASK(7, 6)) == BIT(7));
case AXP806_DCDCE:
return !!(reg & BIT(5));
}
break;
default:
return false;
regmap_read(axp20x->regmap, AXP806_DCDC_MODE_CTRL2, &reg);
switch (id) {
case AXP806_DCDCB:
return (((reg & GENMASK(7, 6)) == BIT(6)) ||
((reg & GENMASK(7, 6)) == BIT(7)));
case AXP806_DCDCC:
return ((reg & GENMASK(7, 6)) == BIT(7));
case AXP806_DCDCE:
return !!(reg & BIT(5));
}
return false;
@ -540,6 +644,10 @@ static int axp20x_regulator_probe(struct platform_device *pdev)
drivevbus = of_property_read_bool(pdev->dev.parent->of_node,
"x-powers,drive-vbus-en");
break;
case AXP803_ID:
regulators = axp803_regulators;
nregulators = AXP803_REG_ID_MAX;
break;
case AXP806_ID:
regulators = axp806_regulators;
nregulators = AXP806_REG_ID_MAX;
@ -579,6 +687,7 @@ static int axp20x_regulator_probe(struct platform_device *pdev)
* name.
*/
if ((regulators == axp22x_regulators && i == AXP22X_DC1SW) ||
(regulators == axp803_regulators && i == AXP803_DC1SW) ||
(regulators == axp809_regulators && i == AXP809_DC1SW)) {
new_desc = devm_kzalloc(&pdev->dev, sizeof(*desc),
GFP_KERNEL);

View File

@ -43,7 +43,7 @@ enum bd9571mwv_regulators { VD09, VD18, VD25, VD33, DVFS };
.linear_min_sel = _lmin, \
}
int bd9571mwv_avs_get_moni_state(struct regulator_dev *rdev)
static int bd9571mwv_avs_get_moni_state(struct regulator_dev *rdev)
{
unsigned int val;
int ret;
@ -55,8 +55,8 @@ int bd9571mwv_avs_get_moni_state(struct regulator_dev *rdev)
return val & BD9571MWV_AVS_SET_MONI_MASK;
}
int bd9571mwv_avs_set_voltage_sel_regmap(struct regulator_dev *rdev,
unsigned int sel)
static int bd9571mwv_avs_set_voltage_sel_regmap(struct regulator_dev *rdev,
unsigned int sel)
{
int ret;
@ -68,7 +68,7 @@ int bd9571mwv_avs_set_voltage_sel_regmap(struct regulator_dev *rdev,
rdev->desc->vsel_mask, sel);
}
int bd9571mwv_avs_get_voltage_sel_regmap(struct regulator_dev *rdev)
static int bd9571mwv_avs_get_voltage_sel_regmap(struct regulator_dev *rdev)
{
unsigned int val;
int ret;
@ -87,8 +87,8 @@ int bd9571mwv_avs_get_voltage_sel_regmap(struct regulator_dev *rdev)
return val;
}
int bd9571mwv_reg_set_voltage_sel_regmap(struct regulator_dev *rdev,
unsigned int sel)
static int bd9571mwv_reg_set_voltage_sel_regmap(struct regulator_dev *rdev,
unsigned int sel)
{
return regmap_write_bits(rdev->regmap, BD9571MWV_DVFS_SETVID,
rdev->desc->vsel_mask, sel);

View File

@ -1462,7 +1462,7 @@ static struct regulator_dev *regulator_lookup_by_name(const char *name)
static struct regulator_dev *regulator_dev_lookup(struct device *dev,
const char *supply)
{
struct regulator_dev *r;
struct regulator_dev *r = NULL;
struct device_node *node;
struct regulator_map *map;
const char *devname = NULL;
@ -1489,10 +1489,6 @@ static struct regulator_dev *regulator_dev_lookup(struct device *dev,
if (dev)
devname = dev_name(dev);
r = regulator_lookup_by_name(supply);
if (r)
return r;
mutex_lock(&regulator_list_mutex);
list_for_each_entry(map, &regulator_map_list, list) {
/* If the mapping has a device set up it must match */
@ -1508,6 +1504,10 @@ static struct regulator_dev *regulator_dev_lookup(struct device *dev,
}
mutex_unlock(&regulator_list_mutex);
if (r)
return r;
r = regulator_lookup_by_name(supply);
if (r)
return r;
@ -2767,6 +2767,12 @@ static int _regulator_set_voltage_time(struct regulator_dev *rdev,
ramp_delay = rdev->desc->ramp_delay;
else if (rdev->constraints->settling_time)
return rdev->constraints->settling_time;
else if (rdev->constraints->settling_time_up &&
(new_uV > old_uV))
return rdev->constraints->settling_time_up;
else if (rdev->constraints->settling_time_down &&
(new_uV < old_uV))
return rdev->constraints->settling_time_down;
if (ramp_delay == 0) {
rdev_dbg(rdev, "ramp_delay not set\n");
@ -2938,7 +2944,8 @@ static int regulator_set_voltage_unlocked(struct regulator *regulator,
if (rdev->supply &&
regulator_ops_is_valid(rdev->supply->rdev,
REGULATOR_CHANGE_VOLTAGE) &&
(rdev->desc->min_dropout_uV || !rdev->desc->ops->get_voltage)) {
(rdev->desc->min_dropout_uV || !(rdev->desc->ops->get_voltage ||
rdev->desc->ops->get_voltage_sel))) {
int current_supply_uV;
int selector;
@ -4311,41 +4318,31 @@ void *regulator_get_init_drvdata(struct regulator_init_data *reg_init_data)
EXPORT_SYMBOL_GPL(regulator_get_init_drvdata);
#ifdef CONFIG_DEBUG_FS
static ssize_t supply_map_read_file(struct file *file, char __user *user_buf,
size_t count, loff_t *ppos)
static int supply_map_show(struct seq_file *sf, void *data)
{
char *buf = kmalloc(PAGE_SIZE, GFP_KERNEL);
ssize_t len, ret = 0;
struct regulator_map *map;
if (!buf)
return -ENOMEM;
list_for_each_entry(map, &regulator_map_list, list) {
len = snprintf(buf + ret, PAGE_SIZE - ret,
"%s -> %s.%s\n",
rdev_get_name(map->regulator), map->dev_name,
map->supply);
if (len >= 0)
ret += len;
if (ret > PAGE_SIZE) {
ret = PAGE_SIZE;
break;
}
seq_printf(sf, "%s -> %s.%s\n",
rdev_get_name(map->regulator), map->dev_name,
map->supply);
}
ret = simple_read_from_buffer(user_buf, count, ppos, buf, ret);
return 0;
}
kfree(buf);
return ret;
static int supply_map_open(struct inode *inode, struct file *file)
{
return single_open(file, supply_map_show, inode->i_private);
}
#endif
static const struct file_operations supply_map_fops = {
#ifdef CONFIG_DEBUG_FS
.read = supply_map_read_file,
.llseek = default_llseek,
.open = supply_map_open,
.read = seq_read,
.llseek = seq_lseek,
.release = single_release,
#endif
};

View File

@ -1,6 +1,6 @@
/*
* da9062-regulator.c - REGULATOR device driver for DA9062
* Copyright (C) 2015 Dialog Semiconductor Ltd.
* Regulator device driver for DA9061 and DA9062.
* Copyright (C) 2015-2017 Dialog Semiconductor
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
@ -27,6 +27,17 @@
#include <linux/mfd/da9062/registers.h>
/* Regulator IDs */
enum {
DA9061_ID_BUCK1,
DA9061_ID_BUCK2,
DA9061_ID_BUCK3,
DA9061_ID_LDO1,
DA9061_ID_LDO2,
DA9061_ID_LDO3,
DA9061_ID_LDO4,
DA9061_MAX_REGULATORS,
};
enum {
DA9062_ID_BUCK1,
DA9062_ID_BUCK2,
@ -88,15 +99,21 @@ enum {
/* Regulator operations */
/* Current limits array (in uA) BUCK1 and BUCK3.
Entry indexes corresponds to register values. */
/* Current limits array (in uA)
* - DA9061_ID_[BUCK1|BUCK3]
* - DA9062_ID_[BUCK1|BUCK2|BUCK4]
* Entry indexes corresponds to register values.
*/
static const int da9062_buck_a_limits[] = {
500000, 600000, 700000, 800000, 900000, 1000000, 1100000, 1200000,
1300000, 1400000, 1500000, 1600000, 1700000, 1800000, 1900000, 2000000
};
/* Current limits array (in uA) for BUCK2.
Entry indexes corresponds to register values. */
/* Current limits array (in uA)
* - DA9061_ID_BUCK2
* - DA9062_ID_BUCK3
* Entry indexes corresponds to register values.
*/
static const int da9062_buck_b_limits[] = {
1500000, 1600000, 1700000, 1800000, 1900000, 2000000, 2100000, 2200000,
2300000, 2400000, 2500000, 2600000, 2700000, 2800000, 2900000, 3000000
@ -405,8 +422,254 @@ static const struct regulator_ops da9062_ldo_ops = {
.set_suspend_mode = da9062_ldo_set_suspend_mode,
};
/* Regulator information */
static const struct da9062_regulator_info local_regulator_info[] = {
/* DA9061 Regulator information */
static const struct da9062_regulator_info local_da9061_regulator_info[] = {
{
.desc.id = DA9061_ID_BUCK1,
.desc.name = "DA9061 BUCK1",
.desc.of_match = of_match_ptr("buck1"),
.desc.regulators_node = of_match_ptr("regulators"),
.desc.ops = &da9062_buck_ops,
.desc.min_uV = (300) * 1000,
.desc.uV_step = (10) * 1000,
.desc.n_voltages = ((1570) - (300))/(10) + 1,
.current_limits = da9062_buck_a_limits,
.n_current_limits = ARRAY_SIZE(da9062_buck_a_limits),
.desc.enable_reg = DA9062AA_BUCK1_CONT,
.desc.enable_mask = DA9062AA_BUCK1_EN_MASK,
.desc.vsel_reg = DA9062AA_VBUCK1_A,
.desc.vsel_mask = DA9062AA_VBUCK1_A_MASK,
.desc.linear_min_sel = 0,
.sleep = REG_FIELD(DA9062AA_VBUCK1_A,
__builtin_ffs((int)DA9062AA_BUCK1_SL_A_MASK) - 1,
sizeof(unsigned int) * 8 -
__builtin_clz((DA9062AA_BUCK1_SL_A_MASK)) - 1),
.suspend_sleep = REG_FIELD(DA9062AA_VBUCK1_B,
__builtin_ffs((int)DA9062AA_BUCK1_SL_B_MASK) - 1,
sizeof(unsigned int) * 8 -
__builtin_clz((DA9062AA_BUCK1_SL_B_MASK)) - 1),
.suspend_vsel_reg = DA9062AA_VBUCK1_B,
.mode = REG_FIELD(DA9062AA_BUCK1_CFG,
__builtin_ffs((int)DA9062AA_BUCK1_MODE_MASK) - 1,
sizeof(unsigned int) * 8 -
__builtin_clz((DA9062AA_BUCK1_MODE_MASK)) - 1),
.suspend = REG_FIELD(DA9062AA_DVC_1,
__builtin_ffs((int)DA9062AA_VBUCK1_SEL_MASK) - 1,
sizeof(unsigned int) * 8 -
__builtin_clz((DA9062AA_VBUCK1_SEL_MASK)) - 1),
.ilimit = REG_FIELD(DA9062AA_BUCK_ILIM_C,
__builtin_ffs((int)DA9062AA_BUCK1_ILIM_MASK) - 1,
sizeof(unsigned int) * 8 -
__builtin_clz((DA9062AA_BUCK1_ILIM_MASK)) - 1),
},
{
.desc.id = DA9061_ID_BUCK2,
.desc.name = "DA9061 BUCK2",
.desc.of_match = of_match_ptr("buck2"),
.desc.regulators_node = of_match_ptr("regulators"),
.desc.ops = &da9062_buck_ops,
.desc.min_uV = (800) * 1000,
.desc.uV_step = (20) * 1000,
.desc.n_voltages = ((3340) - (800))/(20) + 1,
.current_limits = da9062_buck_b_limits,
.n_current_limits = ARRAY_SIZE(da9062_buck_b_limits),
.desc.enable_reg = DA9062AA_BUCK3_CONT,
.desc.enable_mask = DA9062AA_BUCK3_EN_MASK,
.desc.vsel_reg = DA9062AA_VBUCK3_A,
.desc.vsel_mask = DA9062AA_VBUCK3_A_MASK,
.desc.linear_min_sel = 0,
.sleep = REG_FIELD(DA9062AA_VBUCK3_A,
__builtin_ffs((int)DA9062AA_BUCK3_SL_A_MASK) - 1,
sizeof(unsigned int) * 8 -
__builtin_clz((DA9062AA_BUCK3_SL_A_MASK)) - 1),
.suspend_sleep = REG_FIELD(DA9062AA_VBUCK3_B,
__builtin_ffs((int)DA9062AA_BUCK3_SL_B_MASK) - 1,
sizeof(unsigned int) * 8 -
__builtin_clz((DA9062AA_BUCK3_SL_B_MASK)) - 1),
.suspend_vsel_reg = DA9062AA_VBUCK3_B,
.mode = REG_FIELD(DA9062AA_BUCK3_CFG,
__builtin_ffs((int)DA9062AA_BUCK3_MODE_MASK) - 1,
sizeof(unsigned int) * 8 -
__builtin_clz((DA9062AA_BUCK3_MODE_MASK)) - 1),
.suspend = REG_FIELD(DA9062AA_DVC_1,
__builtin_ffs((int)DA9062AA_VBUCK3_SEL_MASK) - 1,
sizeof(unsigned int) * 8 -
__builtin_clz((DA9062AA_VBUCK3_SEL_MASK)) - 1),
.ilimit = REG_FIELD(DA9062AA_BUCK_ILIM_A,
__builtin_ffs((int)DA9062AA_BUCK3_ILIM_MASK) - 1,
sizeof(unsigned int) * 8 -
__builtin_clz((DA9062AA_BUCK3_ILIM_MASK)) - 1),
},
{
.desc.id = DA9061_ID_BUCK3,
.desc.name = "DA9061 BUCK3",
.desc.of_match = of_match_ptr("buck3"),
.desc.regulators_node = of_match_ptr("regulators"),
.desc.ops = &da9062_buck_ops,
.desc.min_uV = (530) * 1000,
.desc.uV_step = (10) * 1000,
.desc.n_voltages = ((1800) - (530))/(10) + 1,
.current_limits = da9062_buck_a_limits,
.n_current_limits = ARRAY_SIZE(da9062_buck_a_limits),
.desc.enable_reg = DA9062AA_BUCK4_CONT,
.desc.enable_mask = DA9062AA_BUCK4_EN_MASK,
.desc.vsel_reg = DA9062AA_VBUCK4_A,
.desc.vsel_mask = DA9062AA_VBUCK4_A_MASK,
.desc.linear_min_sel = 0,
.sleep = REG_FIELD(DA9062AA_VBUCK4_A,
__builtin_ffs((int)DA9062AA_BUCK4_SL_A_MASK) - 1,
sizeof(unsigned int) * 8 -
__builtin_clz((DA9062AA_BUCK4_SL_A_MASK)) - 1),
.suspend_sleep = REG_FIELD(DA9062AA_VBUCK4_B,
__builtin_ffs((int)DA9062AA_BUCK4_SL_B_MASK) - 1,
sizeof(unsigned int) * 8 -
__builtin_clz((DA9062AA_BUCK4_SL_B_MASK)) - 1),
.suspend_vsel_reg = DA9062AA_VBUCK4_B,
.mode = REG_FIELD(DA9062AA_BUCK4_CFG,
__builtin_ffs((int)DA9062AA_BUCK4_MODE_MASK) - 1,
sizeof(unsigned int) * 8 -
__builtin_clz((DA9062AA_BUCK4_MODE_MASK)) - 1),
.suspend = REG_FIELD(DA9062AA_DVC_1,
__builtin_ffs((int)DA9062AA_VBUCK4_SEL_MASK) - 1,
sizeof(unsigned int) * 8 -
__builtin_clz((DA9062AA_VBUCK4_SEL_MASK)) - 1),
.ilimit = REG_FIELD(DA9062AA_BUCK_ILIM_B,
__builtin_ffs((int)DA9062AA_BUCK4_ILIM_MASK) - 1,
sizeof(unsigned int) * 8 -
__builtin_clz((DA9062AA_BUCK4_ILIM_MASK)) - 1),
},
{
.desc.id = DA9061_ID_LDO1,
.desc.name = "DA9061 LDO1",
.desc.of_match = of_match_ptr("ldo1"),
.desc.regulators_node = of_match_ptr("regulators"),
.desc.ops = &da9062_ldo_ops,
.desc.min_uV = (900) * 1000,
.desc.uV_step = (50) * 1000,
.desc.n_voltages = ((3600) - (900))/(50) + 1,
.desc.enable_reg = DA9062AA_LDO1_CONT,
.desc.enable_mask = DA9062AA_LDO1_EN_MASK,
.desc.vsel_reg = DA9062AA_VLDO1_A,
.desc.vsel_mask = DA9062AA_VLDO1_A_MASK,
.desc.linear_min_sel = 0,
.sleep = REG_FIELD(DA9062AA_VLDO1_A,
__builtin_ffs((int)DA9062AA_LDO1_SL_A_MASK) - 1,
sizeof(unsigned int) * 8 -
__builtin_clz((DA9062AA_LDO1_SL_A_MASK)) - 1),
.suspend_sleep = REG_FIELD(DA9062AA_VLDO1_B,
__builtin_ffs((int)DA9062AA_LDO1_SL_B_MASK) - 1,
sizeof(unsigned int) * 8 -
__builtin_clz((DA9062AA_LDO1_SL_B_MASK)) - 1),
.suspend_vsel_reg = DA9062AA_VLDO1_B,
.suspend = REG_FIELD(DA9062AA_DVC_1,
__builtin_ffs((int)DA9062AA_VLDO1_SEL_MASK) - 1,
sizeof(unsigned int) * 8 -
__builtin_clz((DA9062AA_VLDO1_SEL_MASK)) - 1),
.oc_event = REG_FIELD(DA9062AA_STATUS_D,
__builtin_ffs((int)DA9062AA_LDO1_ILIM_MASK) - 1,
sizeof(unsigned int) * 8 -
__builtin_clz((DA9062AA_LDO1_ILIM_MASK)) - 1),
},
{
.desc.id = DA9061_ID_LDO2,
.desc.name = "DA9061 LDO2",
.desc.of_match = of_match_ptr("ldo2"),
.desc.regulators_node = of_match_ptr("regulators"),
.desc.ops = &da9062_ldo_ops,
.desc.min_uV = (900) * 1000,
.desc.uV_step = (50) * 1000,
.desc.n_voltages = ((3600) - (600))/(50) + 1,
.desc.enable_reg = DA9062AA_LDO2_CONT,
.desc.enable_mask = DA9062AA_LDO2_EN_MASK,
.desc.vsel_reg = DA9062AA_VLDO2_A,
.desc.vsel_mask = DA9062AA_VLDO2_A_MASK,
.desc.linear_min_sel = 0,
.sleep = REG_FIELD(DA9062AA_VLDO2_A,
__builtin_ffs((int)DA9062AA_LDO2_SL_A_MASK) - 1,
sizeof(unsigned int) * 8 -
__builtin_clz((DA9062AA_LDO2_SL_A_MASK)) - 1),
.suspend_sleep = REG_FIELD(DA9062AA_VLDO2_B,
__builtin_ffs((int)DA9062AA_LDO2_SL_B_MASK) - 1,
sizeof(unsigned int) * 8 -
__builtin_clz((DA9062AA_LDO2_SL_B_MASK)) - 1),
.suspend_vsel_reg = DA9062AA_VLDO2_B,
.suspend = REG_FIELD(DA9062AA_DVC_1,
__builtin_ffs((int)DA9062AA_VLDO2_SEL_MASK) - 1,
sizeof(unsigned int) * 8 -
__builtin_clz((DA9062AA_VLDO2_SEL_MASK)) - 1),
.oc_event = REG_FIELD(DA9062AA_STATUS_D,
__builtin_ffs((int)DA9062AA_LDO2_ILIM_MASK) - 1,
sizeof(unsigned int) * 8 -
__builtin_clz((DA9062AA_LDO2_ILIM_MASK)) - 1),
},
{
.desc.id = DA9061_ID_LDO3,
.desc.name = "DA9061 LDO3",
.desc.of_match = of_match_ptr("ldo3"),
.desc.regulators_node = of_match_ptr("regulators"),
.desc.ops = &da9062_ldo_ops,
.desc.min_uV = (900) * 1000,
.desc.uV_step = (50) * 1000,
.desc.n_voltages = ((3600) - (900))/(50) + 1,
.desc.enable_reg = DA9062AA_LDO3_CONT,
.desc.enable_mask = DA9062AA_LDO3_EN_MASK,
.desc.vsel_reg = DA9062AA_VLDO3_A,
.desc.vsel_mask = DA9062AA_VLDO3_A_MASK,
.desc.linear_min_sel = 0,
.sleep = REG_FIELD(DA9062AA_VLDO3_A,
__builtin_ffs((int)DA9062AA_LDO3_SL_A_MASK) - 1,
sizeof(unsigned int) * 8 -
__builtin_clz((DA9062AA_LDO3_SL_A_MASK)) - 1),
.suspend_sleep = REG_FIELD(DA9062AA_VLDO3_B,
__builtin_ffs((int)DA9062AA_LDO3_SL_B_MASK) - 1,
sizeof(unsigned int) * 8 -
__builtin_clz((DA9062AA_LDO3_SL_B_MASK)) - 1),
.suspend_vsel_reg = DA9062AA_VLDO3_B,
.suspend = REG_FIELD(DA9062AA_DVC_1,
__builtin_ffs((int)DA9062AA_VLDO3_SEL_MASK) - 1,
sizeof(unsigned int) * 8 -
__builtin_clz((DA9062AA_VLDO3_SEL_MASK)) - 1),
.oc_event = REG_FIELD(DA9062AA_STATUS_D,
__builtin_ffs((int)DA9062AA_LDO3_ILIM_MASK) - 1,
sizeof(unsigned int) * 8 -
__builtin_clz((DA9062AA_LDO3_ILIM_MASK)) - 1),
},
{
.desc.id = DA9061_ID_LDO4,
.desc.name = "DA9061 LDO4",
.desc.of_match = of_match_ptr("ldo4"),
.desc.regulators_node = of_match_ptr("regulators"),
.desc.ops = &da9062_ldo_ops,
.desc.min_uV = (900) * 1000,
.desc.uV_step = (50) * 1000,
.desc.n_voltages = ((3600) - (900))/(50) + 1,
.desc.enable_reg = DA9062AA_LDO4_CONT,
.desc.enable_mask = DA9062AA_LDO4_EN_MASK,
.desc.vsel_reg = DA9062AA_VLDO4_A,
.desc.vsel_mask = DA9062AA_VLDO4_A_MASK,
.desc.linear_min_sel = 0,
.sleep = REG_FIELD(DA9062AA_VLDO4_A,
__builtin_ffs((int)DA9062AA_LDO4_SL_A_MASK) - 1,
sizeof(unsigned int) * 8 -
__builtin_clz((DA9062AA_LDO4_SL_A_MASK)) - 1),
.suspend_sleep = REG_FIELD(DA9062AA_VLDO4_B,
__builtin_ffs((int)DA9062AA_LDO4_SL_B_MASK) - 1,
sizeof(unsigned int) * 8 -
__builtin_clz((DA9062AA_LDO4_SL_B_MASK)) - 1),
.suspend_vsel_reg = DA9062AA_VLDO4_B,
.suspend = REG_FIELD(DA9062AA_DVC_1,
__builtin_ffs((int)DA9062AA_VLDO4_SEL_MASK) - 1,
sizeof(unsigned int) * 8 -
__builtin_clz((DA9062AA_VLDO4_SEL_MASK)) - 1),
.oc_event = REG_FIELD(DA9062AA_STATUS_D,
__builtin_ffs((int)DA9062AA_LDO4_ILIM_MASK) - 1,
sizeof(unsigned int) * 8 -
__builtin_clz((DA9062AA_LDO4_ILIM_MASK)) - 1),
},
};
/* DA9062 Regulator information */
static const struct da9062_regulator_info local_da9062_regulator_info[] = {
{
.desc.id = DA9062_ID_BUCK1,
.desc.name = "DA9062 BUCK1",
@ -727,17 +990,33 @@ static int da9062_regulator_probe(struct platform_device *pdev)
struct da9062_regulators *regulators;
struct da9062_regulator *regl;
struct regulator_config config = { };
const struct da9062_regulator_info *rinfo;
int irq, n, ret;
size_t size;
int max_regulators;
switch (chip->chip_type) {
case COMPAT_TYPE_DA9061:
max_regulators = DA9061_MAX_REGULATORS;
rinfo = local_da9061_regulator_info;
break;
case COMPAT_TYPE_DA9062:
max_regulators = DA9062_MAX_REGULATORS;
rinfo = local_da9062_regulator_info;
break;
default:
dev_err(chip->dev, "Unrecognised chip type\n");
return -ENODEV;
}
/* Allocate memory required by usable regulators */
size = sizeof(struct da9062_regulators) +
DA9062_MAX_REGULATORS * sizeof(struct da9062_regulator);
max_regulators * sizeof(struct da9062_regulator);
regulators = devm_kzalloc(&pdev->dev, size, GFP_KERNEL);
if (!regulators)
return -ENOMEM;
regulators->n_regulators = DA9062_MAX_REGULATORS;
regulators->n_regulators = max_regulators;
platform_set_drvdata(pdev, regulators);
n = 0;
@ -745,7 +1024,7 @@ static int da9062_regulator_probe(struct platform_device *pdev)
/* Initialise regulator structure */
regl = &regulators->regulator[n];
regl->hw = chip;
regl->info = &local_regulator_info[n];
regl->info = &rinfo[n];
regl->desc = regl->info->desc;
regl->desc.type = REGULATOR_VOLTAGE;
regl->desc.owner = THIS_MODULE;
@ -836,6 +1115,6 @@ module_exit(da9062_regulator_cleanup);
/* Module information */
MODULE_AUTHOR("S Twiss <stwiss.opensource@diasemi.com>");
MODULE_DESCRIPTION("REGULATOR device driver for Dialog DA9062");
MODULE_DESCRIPTION("REGULATOR device driver for Dialog DA9062 and DA9061");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:da9062-regulators");

View File

@ -621,7 +621,14 @@ static int hi6421_regulator_probe(struct platform_device *pdev)
return 0;
}
static const struct platform_device_id hi6421_regulator_table[] = {
{ .name = "hi6421-regulator" },
{},
};
MODULE_DEVICE_TABLE(platform, hi6421_regulator_table);
static struct platform_driver hi6421_regulator_driver = {
.id_table = hi6421_regulator_table,
.driver = {
.name = "hi6421-regulator",
},

View File

@ -0,0 +1,214 @@
/*
* Device driver for regulators in Hi6421V530 IC
*
* Copyright (c) <2017> HiSilicon Technologies Co., Ltd.
* http://www.hisilicon.com
* Copyright (c) <2017> Linaro Ltd.
* http://www.linaro.org
*
* Author: Wang Xiaoyin <hw.wangxiaoyin@hisilicon.com>
* Guodong Xu <guodong.xu@linaro.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/mfd/hi6421-pmic.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/regulator/driver.h>
/*
* struct hi6421v530_regulator_info - hi6421v530 regulator information
* @desc: regulator description
* @mode_mask: ECO mode bitmask of LDOs; for BUCKs, this masks sleep
* @eco_microamp: eco mode load upper limit (in uA), valid for LDOs only
*/
struct hi6421v530_regulator_info {
struct regulator_desc rdesc;
u8 mode_mask;
u32 eco_microamp;
};
/* HI6421v530 regulators */
enum hi6421v530_regulator_id {
HI6421V530_LDO3,
HI6421V530_LDO9,
HI6421V530_LDO11,
HI6421V530_LDO15,
HI6421V530_LDO16,
};
static const unsigned int ldo_3_voltages[] = {
1800000, 1825000, 1850000, 1875000,
1900000, 1925000, 1950000, 1975000,
2000000, 2025000, 2050000, 2075000,
2100000, 2125000, 2150000, 2200000,
};
static const unsigned int ldo_9_11_voltages[] = {
1750000, 1800000, 1825000, 2800000,
2850000, 2950000, 3000000, 3300000,
};
static const unsigned int ldo_15_16_voltages[] = {
1750000, 1800000, 2400000, 2600000,
2700000, 2850000, 2950000, 3000000,
};
static const struct regulator_ops hi6421v530_ldo_ops;
#define HI6421V530_LDO_ENABLE_TIME (350)
/*
* _id - LDO id name string
* v_table - voltage table
* vreg - voltage select register
* vmask - voltage select mask
* ereg - enable register
* emask - enable mask
* odelay - off/on delay time in uS
* ecomask - eco mode mask
* ecoamp - eco mode load uppler limit in uA
*/
#define HI6421V530_LDO(_ID, v_table, vreg, vmask, ereg, emask, \
odelay, ecomask, ecoamp) { \
.rdesc = { \
.name = #_ID, \
.of_match = of_match_ptr(#_ID), \
.regulators_node = of_match_ptr("regulators"), \
.ops = &hi6421v530_ldo_ops, \
.type = REGULATOR_VOLTAGE, \
.id = HI6421V530_##_ID, \
.owner = THIS_MODULE, \
.n_voltages = ARRAY_SIZE(v_table), \
.volt_table = v_table, \
.vsel_reg = HI6421_REG_TO_BUS_ADDR(vreg), \
.vsel_mask = vmask, \
.enable_reg = HI6421_REG_TO_BUS_ADDR(ereg), \
.enable_mask = emask, \
.enable_time = HI6421V530_LDO_ENABLE_TIME, \
.off_on_delay = odelay, \
}, \
.mode_mask = ecomask, \
.eco_microamp = ecoamp, \
}
/* HI6421V530 regulator information */
static struct hi6421v530_regulator_info hi6421v530_regulator_info[] = {
HI6421V530_LDO(LDO3, ldo_3_voltages, 0x061, 0xf, 0x060, 0x2,
20000, 0x6, 8000),
HI6421V530_LDO(LDO9, ldo_9_11_voltages, 0x06b, 0x7, 0x06a, 0x2,
40000, 0x6, 8000),
HI6421V530_LDO(LDO11, ldo_9_11_voltages, 0x06f, 0x7, 0x06e, 0x2,
40000, 0x6, 8000),
HI6421V530_LDO(LDO15, ldo_15_16_voltages, 0x077, 0x7, 0x076, 0x2,
40000, 0x6, 8000),
HI6421V530_LDO(LDO16, ldo_15_16_voltages, 0x079, 0x7, 0x078, 0x2,
40000, 0x6, 8000),
};
static unsigned int hi6421v530_regulator_ldo_get_mode(
struct regulator_dev *rdev)
{
struct hi6421v530_regulator_info *info;
unsigned int reg_val;
info = rdev_get_drvdata(rdev);
regmap_read(rdev->regmap, rdev->desc->enable_reg, &reg_val);
if (reg_val & (info->mode_mask))
return REGULATOR_MODE_IDLE;
return REGULATOR_MODE_NORMAL;
}
static int hi6421v530_regulator_ldo_set_mode(struct regulator_dev *rdev,
unsigned int mode)
{
struct hi6421v530_regulator_info *info;
unsigned int new_mode;
info = rdev_get_drvdata(rdev);
switch (mode) {
case REGULATOR_MODE_NORMAL:
new_mode = 0;
break;
case REGULATOR_MODE_IDLE:
new_mode = info->mode_mask;
break;
default:
return -EINVAL;
}
regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
info->mode_mask, new_mode);
return 0;
}
static const struct regulator_ops hi6421v530_ldo_ops = {
.is_enabled = regulator_is_enabled_regmap,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.list_voltage = regulator_list_voltage_table,
.map_voltage = regulator_map_voltage_ascend,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.get_mode = hi6421v530_regulator_ldo_get_mode,
.set_mode = hi6421v530_regulator_ldo_set_mode,
};
static int hi6421v530_regulator_probe(struct platform_device *pdev)
{
struct hi6421_pmic *pmic;
struct regulator_dev *rdev;
struct regulator_config config = { };
unsigned int i;
pmic = dev_get_drvdata(pdev->dev.parent);
if (!pmic) {
dev_err(&pdev->dev, "no pmic in the regulator parent node\n");
return -ENODEV;
}
for (i = 0; i < ARRAY_SIZE(hi6421v530_regulator_info); i++) {
config.dev = pdev->dev.parent;
config.regmap = pmic->regmap;
config.driver_data = &hi6421v530_regulator_info[i];
rdev = devm_regulator_register(&pdev->dev,
&hi6421v530_regulator_info[i].rdesc,
&config);
if (IS_ERR(rdev)) {
dev_err(&pdev->dev, "failed to register regulator %s\n",
hi6421v530_regulator_info[i].rdesc.name);
return PTR_ERR(rdev);
}
}
return 0;
}
static const struct platform_device_id hi6421v530_regulator_table[] = {
{ .name = "hi6421v530-regulator" },
{},
};
MODULE_DEVICE_TABLE(platform, hi6421v530_regulator_table);
static struct platform_driver hi6421v530_regulator_driver = {
.id_table = hi6421v530_regulator_table,
.driver = {
.name = "hi6421v530-regulator",
},
.probe = hi6421v530_regulator_probe,
};
module_platform_driver(hi6421v530_regulator_driver);
MODULE_AUTHOR("Wang Xiaoyin <hw.wangxiaoyin@hisilicon.com>");
MODULE_DESCRIPTION("Hi6421v530 regulator driver");
MODULE_LICENSE("GPL v2");

View File

@ -99,7 +99,7 @@ static int lp8755_buck_enable_time(struct regulator_dev *rdev)
ret = lp8755_read(pchip, 0x12 + id, &regval);
if (ret < 0) {
dev_err(pchip->dev, "i2c acceess error %s\n", __func__);
dev_err(pchip->dev, "i2c access error %s\n", __func__);
return ret;
}
return (regval & 0xff) * 100;
@ -144,7 +144,7 @@ static int lp8755_buck_set_mode(struct regulator_dev *rdev, unsigned int mode)
goto err_i2c;
return ret;
err_i2c:
dev_err(pchip->dev, "i2c acceess error %s\n", __func__);
dev_err(pchip->dev, "i2c access error %s\n", __func__);
return ret;
}
@ -175,7 +175,7 @@ static unsigned int lp8755_buck_get_mode(struct regulator_dev *rdev)
return REGULATOR_MODE_NORMAL;
err_i2c:
dev_err(pchip->dev, "i2c acceess error %s\n", __func__);
dev_err(pchip->dev, "i2c access error %s\n", __func__);
return 0;
}
@ -223,7 +223,7 @@ static int lp8755_buck_set_ramp(struct regulator_dev *rdev, int ramp)
goto err_i2c;
return ret;
err_i2c:
dev_err(pchip->dev, "i2c acceess error %s\n", __func__);
dev_err(pchip->dev, "i2c access error %s\n", __func__);
return ret;
}
@ -295,7 +295,7 @@ static int lp8755_init_data(struct lp8755_chip *pchip)
return ret;
out_i2c_error:
dev_err(pchip->dev, "i2c acceess error %s\n", __func__);
dev_err(pchip->dev, "i2c access error %s\n", __func__);
return ret;
}
@ -404,7 +404,7 @@ static irqreturn_t lp8755_irq_handler(int irq, void *data)
return IRQ_HANDLED;
err_i2c:
dev_err(pchip->dev, "i2c acceess error %s\n", __func__);
dev_err(pchip->dev, "i2c access error %s\n", __func__);
return IRQ_NONE;
}
@ -420,7 +420,7 @@ static int lp8755_int_config(struct lp8755_chip *pchip)
ret = lp8755_read(pchip, 0x0F, &regval);
if (ret < 0) {
dev_err(pchip->dev, "i2c acceess error %s\n", __func__);
dev_err(pchip->dev, "i2c access error %s\n", __func__);
return ret;
}

View File

@ -0,0 +1,236 @@
/*
* Regulator driver for LP87565 PMIC
*
* Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation version 2.
*/
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/mfd/lp87565.h>
#define LP87565_REGULATOR(_name, _id, _of, _ops, _n, _vr, _vm, _er, _em, \
_delay, _lr, _cr) \
[_id] = { \
.desc = { \
.name = _name, \
.supply_name = _of "-in", \
.id = _id, \
.of_match = of_match_ptr(_of), \
.regulators_node = of_match_ptr("regulators"),\
.ops = &_ops, \
.n_voltages = _n, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
.vsel_reg = _vr, \
.vsel_mask = _vm, \
.enable_reg = _er, \
.enable_mask = _em, \
.ramp_delay = _delay, \
.linear_ranges = _lr, \
.n_linear_ranges = ARRAY_SIZE(_lr), \
}, \
.ctrl2_reg = _cr, \
}
struct lp87565_regulator {
struct regulator_desc desc;
unsigned int ctrl2_reg;
};
static const struct lp87565_regulator regulators[];
static const struct regulator_linear_range buck0_1_2_3_ranges[] = {
REGULATOR_LINEAR_RANGE(600000, 0xA, 0x17, 10000),
REGULATOR_LINEAR_RANGE(735000, 0x18, 0x9d, 5000),
REGULATOR_LINEAR_RANGE(1420000, 0x9e, 0xff, 20000),
};
static unsigned int lp87565_buck_ramp_delay[] = {
30000, 15000, 10000, 7500, 3800, 1900, 940, 470
};
/* LP87565 BUCK current limit */
static const unsigned int lp87565_buck_uA[] = {
1500000, 2000000, 2500000, 3000000, 3500000, 4000000, 4500000, 5000000,
};
static int lp87565_buck_set_ramp_delay(struct regulator_dev *rdev,
int ramp_delay)
{
int id = rdev_get_id(rdev);
struct lp87565 *lp87565 = rdev_get_drvdata(rdev);
unsigned int reg;
int ret;
if (ramp_delay <= 470)
reg = 7;
else if (ramp_delay <= 940)
reg = 6;
else if (ramp_delay <= 1900)
reg = 5;
else if (ramp_delay <= 3800)
reg = 4;
else if (ramp_delay <= 7500)
reg = 3;
else if (ramp_delay <= 10000)
reg = 2;
else if (ramp_delay <= 15000)
reg = 1;
else
reg = 0;
ret = regmap_update_bits(lp87565->regmap, regulators[id].ctrl2_reg,
LP87565_BUCK_CTRL_2_SLEW_RATE,
reg << __ffs(LP87565_BUCK_CTRL_2_SLEW_RATE));
if (ret) {
dev_err(lp87565->dev, "SLEW RATE write failed: %d\n", ret);
return ret;
}
rdev->constraints->ramp_delay = lp87565_buck_ramp_delay[reg];
return 0;
}
static int lp87565_buck_set_current_limit(struct regulator_dev *rdev,
int min_uA, int max_uA)
{
int id = rdev_get_id(rdev);
struct lp87565 *lp87565 = rdev_get_drvdata(rdev);
int i;
for (i = ARRAY_SIZE(lp87565_buck_uA) - 1; i >= 0; i--) {
if (lp87565_buck_uA[i] >= min_uA &&
lp87565_buck_uA[i] <= max_uA)
return regmap_update_bits(lp87565->regmap,
regulators[id].ctrl2_reg,
LP87565_BUCK_CTRL_2_ILIM,
i << __ffs(LP87565_BUCK_CTRL_2_ILIM));
}
return -EINVAL;
}
static int lp87565_buck_get_current_limit(struct regulator_dev *rdev)
{
int id = rdev_get_id(rdev);
struct lp87565 *lp87565 = rdev_get_drvdata(rdev);
int ret;
unsigned int val;
ret = regmap_read(lp87565->regmap, regulators[id].ctrl2_reg, &val);
if (ret)
return ret;
val = (val & LP87565_BUCK_CTRL_2_ILIM) >>
__ffs(LP87565_BUCK_CTRL_2_ILIM);
return (val < ARRAY_SIZE(lp87565_buck_uA)) ?
lp87565_buck_uA[val] : -EINVAL;
}
/* Operations permitted on BUCK0, BUCK1 */
static struct regulator_ops lp87565_buck_ops = {
.is_enabled = regulator_is_enabled_regmap,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.list_voltage = regulator_list_voltage_linear_range,
.map_voltage = regulator_map_voltage_linear_range,
.set_voltage_time_sel = regulator_set_voltage_time_sel,
.set_ramp_delay = lp87565_buck_set_ramp_delay,
.set_current_limit = lp87565_buck_set_current_limit,
.get_current_limit = lp87565_buck_get_current_limit,
};
static const struct lp87565_regulator regulators[] = {
LP87565_REGULATOR("BUCK0", LP87565_BUCK_0, "buck0", lp87565_buck_ops,
256, LP87565_REG_BUCK0_VOUT, LP87565_BUCK_VSET,
LP87565_REG_BUCK0_CTRL_1,
LP87565_BUCK_CTRL_1_EN, 3800,
buck0_1_2_3_ranges, LP87565_REG_BUCK0_CTRL_2),
LP87565_REGULATOR("BUCK1", LP87565_BUCK_1, "buck1", lp87565_buck_ops,
256, LP87565_REG_BUCK1_VOUT, LP87565_BUCK_VSET,
LP87565_REG_BUCK1_CTRL_1,
LP87565_BUCK_CTRL_1_EN, 3800,
buck0_1_2_3_ranges, LP87565_REG_BUCK1_CTRL_2),
LP87565_REGULATOR("BUCK2", LP87565_BUCK_2, "buck2", lp87565_buck_ops,
256, LP87565_REG_BUCK2_VOUT, LP87565_BUCK_VSET,
LP87565_REG_BUCK2_CTRL_1,
LP87565_BUCK_CTRL_1_EN, 3800,
buck0_1_2_3_ranges, LP87565_REG_BUCK2_CTRL_2),
LP87565_REGULATOR("BUCK3", LP87565_BUCK_3, "buck3", lp87565_buck_ops,
256, LP87565_REG_BUCK3_VOUT, LP87565_BUCK_VSET,
LP87565_REG_BUCK3_CTRL_1,
LP87565_BUCK_CTRL_1_EN, 3800,
buck0_1_2_3_ranges, LP87565_REG_BUCK3_CTRL_2),
LP87565_REGULATOR("BUCK10", LP87565_BUCK_10, "buck10", lp87565_buck_ops,
256, LP87565_REG_BUCK0_VOUT, LP87565_BUCK_VSET,
LP87565_REG_BUCK0_CTRL_1,
LP87565_BUCK_CTRL_1_EN, 3800,
buck0_1_2_3_ranges, LP87565_REG_BUCK0_CTRL_2),
LP87565_REGULATOR("BUCK23", LP87565_BUCK_23, "buck23", lp87565_buck_ops,
256, LP87565_REG_BUCK2_VOUT, LP87565_BUCK_VSET,
LP87565_REG_BUCK2_CTRL_1,
LP87565_BUCK_CTRL_1_EN, 3800,
buck0_1_2_3_ranges, LP87565_REG_BUCK2_CTRL_2),
};
static int lp87565_regulator_probe(struct platform_device *pdev)
{
struct lp87565 *lp87565 = dev_get_drvdata(pdev->dev.parent);
struct regulator_config config = { };
struct regulator_dev *rdev;
int i, min_idx = LP87565_BUCK_1, max_idx = LP87565_BUCK_3;
platform_set_drvdata(pdev, lp87565);
config.dev = &pdev->dev;
config.dev->of_node = lp87565->dev->of_node;
config.driver_data = lp87565;
config.regmap = lp87565->regmap;
if (lp87565->dev_type == LP87565_DEVICE_TYPE_LP87565_Q1) {
min_idx = LP87565_BUCK_10;
max_idx = LP87565_BUCK_23;
}
for (i = min_idx; i <= max_idx; i++) {
rdev = devm_regulator_register(&pdev->dev, &regulators[i].desc,
&config);
if (IS_ERR(rdev)) {
dev_err(lp87565->dev, "failed to register %s regulator\n",
pdev->name);
return PTR_ERR(rdev);
}
}
return 0;
}
static const struct platform_device_id lp87565_regulator_id_table[] = {
{ "lp87565-regulator", },
{ "lp87565-q1-regulator", },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(platform, lp87565_regulator_id_table);
static struct platform_driver lp87565_regulator_driver = {
.driver = {
.name = "lp87565-pmic",
},
.probe = lp87565_regulator_probe,
.id_table = lp87565_regulator_id_table,
};
module_platform_driver(lp87565_regulator_driver);
MODULE_AUTHOR("J Keerthy <j-keerthy@ti.com>");
MODULE_DESCRIPTION("LP87565 voltage regulator driver");
MODULE_LICENSE("GPL v2");

View File

@ -428,12 +428,9 @@ static int max8997_set_voltage_charger_cv(struct regulator_dev *rdev,
if (max_uV < 4000000 || min_uV > 4350000)
return -EINVAL;
if (min_uV <= 4000000) {
if (max_uV >= 4000000)
return -EINVAL;
else
val = 0x1;
} else if (min_uV <= 4200000 && max_uV >= 4200000)
if (min_uV <= 4000000)
val = 0x1;
else if (min_uV <= 4200000 && max_uV >= 4200000)
val = 0x0;
else {
lb = (min_uV - 4000001) / 20000 + 2;

View File

@ -90,6 +90,25 @@ static void of_get_regulation_constraints(struct device_node *np,
if (!ret)
constraints->settling_time = pval;
ret = of_property_read_u32(np, "regulator-settling-time-up-us", &pval);
if (!ret)
constraints->settling_time_up = pval;
if (constraints->settling_time_up && constraints->settling_time) {
pr_warn("%s: ambiguous configuration for settling time, ignoring 'regulator-settling-time-up-us'\n",
np->name);
constraints->settling_time_up = 0;
}
ret = of_property_read_u32(np, "regulator-settling-time-down-us",
&pval);
if (!ret)
constraints->settling_time_down = pval;
if (constraints->settling_time_down && constraints->settling_time) {
pr_warn("%s: ambiguous configuration for settling time, ignoring 'regulator-settling-time-down-us'\n",
np->name);
constraints->settling_time_down = 0;
}
ret = of_property_read_u32(np, "regulator-enable-ramp-delay", &pval);
if (!ret)
constraints->enable_time = pval;

View File

@ -263,6 +263,13 @@ static struct palmas_regs_info tps65917_regs_info[] = {
.ctrl_addr = TPS65917_SMPS5_CTRL,
.sleep_id = TPS65917_EXTERNAL_REQSTR_ID_SMPS5,
},
{
.name = "SMPS12",
.sname = "smps1-in",
.vsel_addr = TPS65917_SMPS1_VOLTAGE,
.ctrl_addr = TPS65917_SMPS1_CTRL,
.sleep_id = TPS65917_EXTERNAL_REQSTR_ID_SMPS12,
},
{
.name = "LDO1",
.sname = "ldo1-in",
@ -367,6 +374,7 @@ static struct palmas_sleep_requestor_info tps65917_sleep_req_info[] = {
EXTERNAL_REQUESTOR_TPS65917(SMPS3, 1, 2),
EXTERNAL_REQUESTOR_TPS65917(SMPS4, 1, 3),
EXTERNAL_REQUESTOR_TPS65917(SMPS5, 1, 4),
EXTERNAL_REQUESTOR_TPS65917(SMPS12, 1, 5),
EXTERNAL_REQUESTOR_TPS65917(LDO1, 2, 0),
EXTERNAL_REQUESTOR_TPS65917(LDO2, 2, 1),
EXTERNAL_REQUESTOR_TPS65917(LDO3, 2, 2),
@ -1305,7 +1313,8 @@ static int tps65917_smps_registration(struct palmas_pmic *pmic,
*/
desc = &pmic->desc[id];
desc->n_linear_ranges = 3;
if ((id == TPS65917_REG_SMPS2) && pmic->smps12)
if ((id == TPS65917_REG_SMPS2 || id == TPS65917_REG_SMPS1) &&
pmic->smps12)
continue;
/* Initialise sleep/init values from platform data */
@ -1427,6 +1436,7 @@ static struct of_regulator_match tps65917_matches[] = {
{ .name = "smps3", },
{ .name = "smps4", },
{ .name = "smps5", },
{ .name = "smps12",},
{ .name = "ldo1", },
{ .name = "ldo2", },
{ .name = "ldo3", },
@ -1455,7 +1465,7 @@ static struct palmas_pmic_driver_data palmas_ddata = {
static struct palmas_pmic_driver_data tps65917_ddata = {
.smps_start = TPS65917_REG_SMPS1,
.smps_end = TPS65917_REG_SMPS5,
.smps_end = TPS65917_REG_SMPS12,
.ldo_begin = TPS65917_REG_LDO1,
.ldo_end = TPS65917_REG_LDO5,
.max_reg = TPS65917_NUM_REGS,
@ -1491,7 +1501,7 @@ static int palmas_dt_to_pdata(struct device *dev,
}
for (idx = 0; idx < ddata->max_reg; idx++) {
static struct of_regulator_match *match;
struct of_regulator_match *match;
struct palmas_reg_init *rinit;
struct device_node *np;
@ -1643,8 +1653,10 @@ static int palmas_regulators_probe(struct platform_device *pdev)
if (ret)
return ret;
if (reg & PALMAS_SMPS_CTRL_SMPS12_SMPS123_EN)
if (reg & PALMAS_SMPS_CTRL_SMPS12_SMPS123_EN) {
pmic->smps123 = 1;
pmic->smps12 = 1;
}
if (reg & PALMAS_SMPS_CTRL_SMPS45_SMPS457_EN)
pmic->smps457 = 1;

View File

@ -1107,6 +1107,7 @@ static int tps65910_probe(struct platform_device *pdev)
switch (tps65910_chip_id(tps65910)) {
case TPS65910:
BUILD_BUG_ON(TPS65910_NUM_REGS < ARRAY_SIZE(tps65910_regs));
pmic->get_ctrl_reg = &tps65910_get_ctrl_register;
pmic->num_regulators = ARRAY_SIZE(tps65910_regs);
pmic->ext_sleep_control = tps65910_ext_sleep_control;
@ -1119,6 +1120,7 @@ static int tps65910_probe(struct platform_device *pdev)
DCDCCTRL_DCDCCKSYNC_MASK);
break;
case TPS65911:
BUILD_BUG_ON(TPS65910_NUM_REGS < ARRAY_SIZE(tps65911_regs));
pmic->get_ctrl_reg = &tps65911_get_ctrl_register;
pmic->num_regulators = ARRAY_SIZE(tps65911_regs);
pmic->ext_sleep_control = tps65911_ext_sleep_control;
@ -1144,8 +1146,7 @@ static int tps65910_probe(struct platform_device *pdev)
if (!pmic->rdev)
return -ENOMEM;
for (i = 0; i < pmic->num_regulators && i < TPS65910_NUM_REGS;
i++, info++) {
for (i = 0; i < pmic->num_regulators; i++, info++) {
/* Register the regulators */
pmic->info[i] = info;

View File

@ -119,6 +119,17 @@ enum axp20x_variants {
#define AXP806_BUS_ADDR_EXT 0xfe
#define AXP806_REG_ADDR_EXT 0xff
#define AXP803_POLYPHASE_CTRL 0x14
#define AXP803_FLDO1_V_OUT 0x1c
#define AXP803_FLDO2_V_OUT 0x1d
#define AXP803_DCDC1_V_OUT 0x20
#define AXP803_DCDC2_V_OUT 0x21
#define AXP803_DCDC3_V_OUT 0x22
#define AXP803_DCDC4_V_OUT 0x23
#define AXP803_DCDC5_V_OUT 0x24
#define AXP803_DCDC6_V_OUT 0x25
#define AXP803_DCDC_FREQ_CTRL 0x3b
/* Interrupt */
#define AXP152_IRQ1_EN 0x40
#define AXP152_IRQ2_EN 0x41
@ -350,6 +361,32 @@ enum {
AXP809_REG_ID_MAX,
};
enum {
AXP803_DCDC1 = 0,
AXP803_DCDC2,
AXP803_DCDC3,
AXP803_DCDC4,
AXP803_DCDC5,
AXP803_DCDC6,
AXP803_DC1SW,
AXP803_ALDO1,
AXP803_ALDO2,
AXP803_ALDO3,
AXP803_DLDO1,
AXP803_DLDO2,
AXP803_DLDO3,
AXP803_DLDO4,
AXP803_ELDO1,
AXP803_ELDO2,
AXP803_ELDO3,
AXP803_FLDO1,
AXP803_FLDO2,
AXP803_RTC_LDO,
AXP803_LDO_IO0,
AXP803_LDO_IO1,
AXP803_REG_ID_MAX,
};
/* IRQs */
enum {
AXP152_IRQ_LDO0IN_CONNECT = 1,

View File

@ -250,6 +250,7 @@ enum tps65917_regulators {
TPS65917_REG_SMPS3,
TPS65917_REG_SMPS4,
TPS65917_REG_SMPS5,
TPS65917_REG_SMPS12,
/* LDO regulators */
TPS65917_REG_LDO1,
TPS65917_REG_LDO2,
@ -317,6 +318,7 @@ enum tps65917_external_requestor_id {
TPS65917_EXTERNAL_REQSTR_ID_SMPS3,
TPS65917_EXTERNAL_REQSTR_ID_SMPS4,
TPS65917_EXTERNAL_REQSTR_ID_SMPS5,
TPS65917_EXTERNAL_REQSTR_ID_SMPS12,
TPS65917_EXTERNAL_REQSTR_ID_LDO1,
TPS65917_EXTERNAL_REQSTR_ID_LDO2,
TPS65917_EXTERNAL_REQSTR_ID_LDO3,

View File

@ -879,7 +879,7 @@ struct tps65910_board {
bool en_ck32k_xtal;
bool en_dev_slp;
bool pm_off;
struct tps65910_sleep_keepon_data *slp_keepon;
struct tps65910_sleep_keepon_data slp_keepon;
bool en_gpio_sleep[TPS6591X_MAX_NUM_GPIO];
unsigned long regulator_ext_sleep_control[TPS65910_NUM_REGS];
struct regulator_init_data *tps65910_pmic_init_data[TPS65910_NUM_REGS];

View File

@ -110,6 +110,10 @@ struct regulator_state {
* @ramp_delay: Time to settle down after voltage change (unit: uV/us)
* @settling_time: Time to settle down after voltage change when voltage
* change is non-linear (unit: microseconds).
* @settling_time_up: Time to settle down after voltage increase when voltage
* change is non-linear (unit: microseconds).
* @settling_time_down : Time to settle down after voltage decrease when
* voltage change is non-linear (unit: microseconds).
* @active_discharge: Enable/disable active discharge. The enum
* regulator_active_discharge values are used for
* initialisation.
@ -152,6 +156,8 @@ struct regulation_constraints {
unsigned int ramp_delay;
unsigned int settling_time;
unsigned int settling_time_up;
unsigned int settling_time_down;
unsigned int enable_time;
unsigned int active_discharge;