Pull x86 debug updates from Ingo Molnar:
"The biggest update is the addition of USB3 debug port based
early-console.
Greg was fine with the USB changes and with the routing of these
patches:
https://www.spinics.net/lists/linux-usb/msg155093.html"
* 'x86-debug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
usb/doc: Add document for USB3 debug port usage
usb/serial: Add DBC debug device support to usb_debug
x86/earlyprintk: Add support for earlyprintk via USB3 debug port
usb/early: Add driver for xhci debug capability
x86/timers: Add simple udelay calibration
Pull RAS updates from Ingo Molnar:
"The main changes in this cycle were:
- add the 'Corrected Errors Collector' kernel feature which collect
and monitor correctable errors statistics and will preemptively
(soft-)offline physical pages that have a suspiciously high error
count.
- handle MCE errors during kexec() more gracefully
- factor out and deprecate the /dev/mcelog driver
- ... plus misc fixes and cleanpus"
* 'ras-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce: Check MCi_STATUS[MISCV] for usable addr on Intel only
ACPI/APEI: Use setup_deferrable_timer()
x86/mce: Update notifier priority check
x86/mce: Enable PPIN for Knights Landing/Mill
x86/mce: Do not register notifiers with invalid prio
x86/mce: Factor out and deprecate the /dev/mcelog driver
RAS: Add a Corrected Errors Collector
x86/mce: Rename mce_log to mce_log_buffer
x86/mce: Rename mce_log()'s argument
x86/mce: Init some CPU features early
x86/mce: Handle broadcasted MCE gracefully with kexec
The AVR32 architecture support has been removed from the Linux kernel,
hence remove all references to it from Documentation.
Signed-off-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no>
Signed-off-by: Håvard Skinnemoen <hskinnemoen@gmail.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
On small systems, in the absence of readers, expedited SRCU grace
periods can complete in less than a microsecond. This means that an
eight-CPU system can have all CPUs doing synchronize_srcu() in a tight
loop and almost always expedite. This might actually be desirable in
some situations, but in general it is a good way to needlessly burn
CPU cycles. And in those situations where it is desirable, your friend
is the function synchronize_srcu_expedited().
For other situations, this commit adds a kernel parameter that specifies
a holdoff between completing the last SRCU grace period and auto-expediting
the next. If the next grace period starts before the holdoff expires,
auto-expediting is disabled. The holdoff is 50 microseconds by default,
and can be tuned to the desired number of nanoseconds. A value of zero
disables auto-expediting.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Mike Galbraith <efault@gmx.de>
IOMMU harms performance signficantly when we run very fast networking
workloads. It's 40GB networking doing XDP test. Software overhead is
almost unaware, but it's the IOTLB miss (based on our analysis) which
kills the performance. We observed the same performance issue even with
software passthrough (identity mapping), only the hardware passthrough
survives. The pps with iommu (with software passthrough) is only about
~30% of that without it. This is a limitation in hardware based on our
observation, so we'd like to disable the IOMMU force on, but we do want
to use TBOOT and we can sacrifice the DMA security bought by IOMMU. I
must admit I know nothing about TBOOT, but TBOOT guys (cc-ed) think not
eabling IOMMU is totally ok.
So introduce a new boot option to disable the force on. It's kind of
silly we need to run into intel_iommu_init even without force on, but we
need to disable TBOOT PMR registers. For system without the boot option,
nothing is changed.
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
In Documentation/process/4.Coding.rst there were a couple of paragraphs
that spilled over the 80 character line length. This was likely caused
when the document was converted to reStructuredText. Re-flow the
paragraphs and make the document references proper reStructuredText
:ref: links.
This also adds the appropriate reStructuredText file heading to
kernel-parameters.rst as referenced by the kernel-parameters link in
this patch.
Signed-off-by: Andrew Clayton <andrew@digital-domain.net>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The objlayout code has been in the tree, but it's been unmaintained and
no server product for it actually ever shipped.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
The IOMMU core currently initialises the default domain for each group
to IOMMU_DOMAIN_DMA, under the assumption that devices will use
IOMMU-backed DMA ops by default. However, in some cases it is desirable
for the DMA ops to bypass the IOMMU for performance reasons, reserving
use of translation for subsystems such as VFIO that require it for
enforcing device isolation.
Rather than modify each IOMMU driver to provide different semantics for
DMA domains, instead we introduce a command line parameter that can be
used to change the type of the default domain. Passthrough can then be
specified using "iommu.passthrough=1" on the kernel command line.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Disable kasan after the first report. There are several reasons for
this:
- Single bug quite often has multiple invalid memory accesses causing
storm in the dmesg.
- Write OOB access might corrupt metadata so the next report will print
bogus alloc/free stacktraces.
- Reports after the first easily could be not bugs by itself but just
side effects of the first one.
Given that multiple reports usually only do harm, it makes sense to
disable kasan after the first one. If user wants to see all the
reports, the boot-time parameter kasan_multi_shot must be used.
[aryabinin@virtuozzo.com: wrote changelog and doc, added missing include]
Link: http://lkml.kernel.org/r/20170323154416.30257-1-aryabinin@virtuozzo.com
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Introduce a simple data structure for collecting correctable errors
along with accessors. More detailed description in the code itself.
The error decoding is done with the decoding chain now and
mce_first_notifier() gets to see the error first and the CEC decides
whether to log it and then the rest of the chain doesn't hear about it -
basically the main reason for the CE collector - or to continue running
the notifiers.
When the CEC hits the action threshold, it will try to soft-offine the
page containing the ECC and then the whole decoding chain gets to see
the error.
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20170327093304.10683-5-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Add support for earlyprintk by writing debug messages to the
USB3 debug port. Users can use this type of early printk by
specifying the kernel parameter of "earlyprintk=xdbc". This
gives users a chance of providing debugging output.
The hardware for USB3 debug port requires DMA memory blocks.
This requires to delay setting up debugging hardware and
registering boot console until the memblocks are filled.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mathias Nyman <mathias.nyman@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-usb@vger.kernel.org
Link: http://lkml.kernel.org/r/1490083293-3792-4-git-send-email-baolu.lu@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Add 'consistency_policy' attribute for array. It indicates how the array
maintains consistency in case of unexpected shutdown.
Add 'ppl_sector' and 'ppl_size' for rdev, which describe the location
and size of the PPL space on the device. They can't be changed for
active members if the array is started and PPL is enabled, so in the
setter functions only basic checks are performed. More checks are done
in ppl_validate_rdev() when starting the log.
These attributes are writable to allow enabling PPL for external
metadata arrays and (later) to enable/disable PPL for a running array.
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Fix typos in admin-guide directory.
Make documentation clear and grammatically correct.
Signed-off-by: Tamara Diaconita <diaconita.tamara@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The UAPI header split failed to update the documentation here; fix things
accordingly.
Signed-off-by: Martin Kepplinger <martink@posteo.de>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The user/admin documentation of cpufreq is badly outdated. It
conains stale and/or inaccurate information along with things
that are not particularly useful. Also, some of the important
pieces are missing from it.
For this reason, add a new user/admin document for cpufreq
containing current information to admin-guide and drop the old
outdated .txt documents it is replacing.
Since there will be more PM documents in admin-guide going forward,
create a separate directory for them and put the cpufreq document
in there right away.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
- Three fixes for intel_pstate problems related to the passive
mode (in which it acts as a regular cpufreq scaling driver), two
for the handling of global P-state limits and one for the handling
of the cpu_frequency tracepoint in that mode (Rafael Wysocki).
- Three fixes for the handling of P-state limits in intel_pstate in
the active mode (Rafael Wysocki).
- Introduction of a new cpufreq.off=1 kernel command line argument
that will disable cpufreq entirely if passed to the kernel and
is simply hooked up to the existing code used by Xen (Len Brown).
- Fix for the schedutil cpufreq governor to prevent it from using
stale raw frequency values in configurations with mutiple CPUs
sharing one policy object and a cleanup for it reducing its
overhead slightly (Viresh Kumar).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=Gwp7
-----END PGP SIGNATURE-----
Merge tag 'pm-4.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix several issues in the intel_pstate driver and one issue in
the schedutil cpufreq governor, clean up that governor a bit and hook
up existing code for disabling cpufreq to a new kernel command line
option.
Specifics:
- Three fixes for intel_pstate problems related to the passive mode
(in which it acts as a regular cpufreq scaling driver), two for the
handling of global P-state limits and one for the handling of the
cpu_frequency tracepoint in that mode (Rafael Wysocki).
- Three fixes for the handling of P-state limits in intel_pstate in
the active mode (Rafael Wysocki).
- Introduction of a new cpufreq.off=1 kernel command line argument
that will disable cpufreq entirely if passed to the kernel and is
simply hooked up to the existing code used by Xen (Len Brown).
- Fix for the schedutil cpufreq governor to prevent it from using
stale raw frequency values in configurations with mutiple CPUs
sharing one policy object and a cleanup for it reducing its
overhead slightly (Viresh Kumar)"
* tag 'pm-4.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: intel_pstate: Do not reinit performance limits in ->setpolicy
cpufreq: intel_pstate: Fix intel_pstate_verify_policy()
cpufreq: intel_pstate: Fix global settings in active mode
cpufreq: Add the "cpufreq.off=1" cmdline option
cpufreq: schedutil: Pass sg_policy to get_next_freq()
cpufreq: schedutil: move cached_raw_freq to struct sugov_policy
cpufreq: intel_pstate: Avoid triggering cpu_frequency tracepoint unnecessarily
cpufreq: intel_pstate: Fix intel_cpufreq_verify_policy()
cpufreq: intel_pstate: Do not use performance_limits in passive mode
* pm-cpufreq:
cpufreq: intel_pstate: Do not reinit performance limits in ->setpolicy
cpufreq: intel_pstate: Fix intel_pstate_verify_policy()
cpufreq: intel_pstate: Fix global settings in active mode
cpufreq: Add the "cpufreq.off=1" cmdline option
cpufreq: intel_pstate: Avoid triggering cpu_frequency tracepoint unnecessarily
cpufreq: intel_pstate: Fix intel_cpufreq_verify_policy()
cpufreq: intel_pstate: Do not use performance_limits in passive mode
window. Namely powerpc broke as jump labels uses the two LSB bits as flags
in initialization. A check was added to make sure that all jump label
entries were 4 bytes aligned, but powerpc didn't work that way for modules.
Adding an alignment in the module linker script appeared to be the best
solution.
Jump labels also added an anonymous union to access those LSB bits as a
normal long. But because this structure had static initialization, it broke
older compilers that could not statically initialize anonymous unions
without brackets.
The command line parameter for setting function graph filter broke the
"EMPTY_HASH" descriptor by modifying it instead of creating a new hash to
hold the entries.
The command line parameter ftrace_graph_max_depth was added to allow its
setting at boot time. It uses existing code and only the command line hook
was added. This is not really a fix, but as it uses existing code without
affecting anything else, I added it to this release. It was ready before the
merge window closed, but I wanted to let it sit in linux-next for a couple
of days first.
-----BEGIN PGP SIGNATURE-----
iQExBAABCAAbBQJYvNrAFBxyb3N0ZWR0QGdvb2RtaXMub3JnAAoJEMm5BfJq2Y3L
JGQIAMkayeZ0OCyYHRPR4EcCrdE3fATmt1huJWHrMPnT4/fLabL8XQqrOpnOBMq1
GFZb1SMkBmvGtAHF4GbvCxnIUfDQko6BTQAd8EMea1WM8+Kb66/BLgJawjWIU9I0
dNYre9ONgR2NOzkz6nfKRXnmy0lRcOweBb09YYGSzY11Md7d8T3T4TUrPNZdYrO9
8ZMbF4qRd9KLMRHcsWqvhWhBISxWnmtUSlthfweukKgDMy8OKpb7pR0ckjtYwsWX
RF41jqLqzSUqtd/nE2Sj/aT8XOP4pfrKEUuNM4SBj8q5jmNcZuqi8Q9wItu3LWR2
jqM/9UKTzaCr9cchwuvUC0i+jWc=
=kDql
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"There was some breakage with the changes for jump labels in the 4.11
merge window:
- powerpc broke as jump labels uses the two LSB bits as flags in
initialization.
A check was added to make sure that all jump label entries were 4
bytes aligned, but powerpc didn't work that way for modules. Adding
an alignment in the module linker script appeared to be the best
solution.
- Jump labels also added an anonymous union to access those LSB bits
as a normal long. But because this structure had static
initialization, it broke older compilers that could not statically
initialize anonymous unions without brackets.
- The command line parameter for setting function graph filter broke
the "EMPTY_HASH" descriptor by modifying it instead of creating a
new hash to hold the entries.
- The command line parameter ftrace_graph_max_depth was added to
allow its setting at boot time. It uses existing code and only the
command line hook was added.
This is not really a fix, but as it uses existing code without
affecting anything else, I added it to this release. It was ready
before the merge window closed, but I wanted to let it sit in
linux-next for a couple of days first"
* tag 'trace-v4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
ftrace/graph: Add ftrace_graph_max_depth kernel parameter
tracing: Add #undef to fix compile error
jump_label: Add comment about initialization order for anonymous unions
jump_label: Fix anonymous union initialization
module: set __jump_table alignment to 8
ftrace/graph: Do not modify the EMPTY_HASH for the function_graph filter
tracing: Fix code comment for ftrace_ops_get_func()
The kernel security team is regularly asked to provide CVE identifiers,
which we don't normally do. This updates the documentation to mention
this and adds some more details about coordination and patch handling
that come up regularly. Based on an earlier draft by Willy Tarreau.
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
For mouse devices we can currently change the polling interval
via usbhid.mousepoll. Implement the same thing for joysticks, so
users can reduce input latency this way.
This has been tested with a Logitech RumblePad 2 with jspoll=2,
resulting in a polling rate of 500Hz (verified with evhz).
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add the "cpufreq.off=1" cmdline option.
At boot-time, this allows a user to request CONFIG_CPU_FREQ=n
behavior from a kernel built with CONFIG_CPU_FREQ=y.
This is analogous to the existing "cpuidle.off=1" option
and CONFIG_CPU_IDLE=y
This capability is valuable when we need to debug end-user
issues in the BIOS or in Linux. It is also convenient
for enabling comparisons, which may otherwise require a new kernel,
or help from BIOS SETUP, which may be buggy or unavailable.
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Early trace callgraphs can be extremely large on systems with
several seconds of boot time. The max_depth parameter limits how
deep the graph trace goes and reduces the output size. This
parameter is the same as the max_graph_depth file in tracefs.
Link: http://lkml.kernel.org/r/1488499935-23216-1-git-send-email-todd.e.brandt@linux.intel.com
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
[ changed comments about debugfs to tracefs ]
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Fix typos and add the following to the scripts/spelling.txt:
an user||a user
an userspace||a userspace
I also added "userspace" to the list since it is a common word in Linux.
I found some instances for "an userfaultfd", but I did not add it to the
list. I felt it is endless to find words that start with "user" such as
"userland" etc., so must draw a line somewhere.
Link: http://lkml.kernel.org/r/1481573103-11329-4-git-send-email-yamada.masahiro@socionext.com
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull md updates from Shaohua Li:
"Mainly fixes bugs and improves performance:
- Improve scalability for raid1 from Coly
- Improve raid5-cache read performance, disk efficiency and IO
pattern from Song and me
- Fix a race condition of disk hotplug for linear from Coly
- A few cleanup patches from Ming and Byungchul
- Fix a memory leak from Neil
- Fix WRITE SAME IO failure from me
- Add doc for raid5-cache from me"
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md: (23 commits)
md/raid1: fix write behind issues introduced by bio_clone_bioset_partial
md/raid1: handle flush request correctly
md/linear: shutup lockdep warnning
md/raid1: fix a use-after-free bug
RAID1: avoid unnecessary spin locks in I/O barrier code
RAID1: a new I/O barrier implementation to remove resync window
md/raid5: Don't reinvent the wheel but use existing llist API
md: fast clone bio in bio_clone_mddev()
md: remove unnecessary check on mddev
md/raid1: use bio_clone_bioset_partial() in case of write behind
md: fail if mddev->bio_set can't be created
block: introduce bio_clone_bioset_partial()
md: disable WRITE SAME if it fails in underlayer disks
md/raid5-cache: exclude reclaiming stripes in reclaim check
md/raid5-cache: stripe reclaim only counts valid stripes
MD: add doc for raid5-cache
Documentation: move MD related doc into a separate dir
md: ensure md devices are freed before module is unloaded.
md/r5cache: improve journal device efficiency
md/r5cache: enable chunk_aligned_read with write back cache
...
Merge updates from Andrew Morton:
"142 patches:
- DAX updates
- various misc bits
- OCFS2 updates
- most of MM"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (142 commits)
mm/z3fold.c: limit first_num to the actual range of possible buddy indexes
mm: fix <linux/pagemap.h> stray kernel-doc notation
zram: remove obsolete sysfs attrs
mm/memblock.c: remove unnecessary log and clean up
oom-reaper: use madvise_dontneed() logic to decide if unmap the VMA
mm: drop unused argument of zap_page_range()
mm: drop zap_details::check_swap_entries
mm: drop zap_details::ignore_dirty
mm, page_alloc: warn_alloc nodemask is NULL when cpusets are disabled
mm: help __GFP_NOFAIL allocations which do not trigger OOM killer
mm, oom: do not enforce OOM killer for __GFP_NOFAIL automatically
mm: consolidate GFP_NOFAIL checks in the allocator slowpath
lib/show_mem.c: teach show_mem to work with the given nodemask
arch, mm: remove arch specific show_mem
mm, page_alloc: warn_alloc print nodemask
mm, page_alloc: do not report all nodes in show_mem
Revert "mm: bail out in shrink_inactive_list()"
mm, vmscan: consider eligible zones in get_scan_count
mm, vmscan: cleanup lru size claculations
mm, vmscan: do not count freed pages as PGDEACTIVATE
...
Three more DocBook template files have been converted to RST; only 21 to
go. There are various build improvements and the usual array of
documentation improvements and fixes.
-----BEGIN PGP SIGNATURE-----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=C5nd
-----END PGP SIGNATURE-----
Merge tag 'docs-4.11' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"A slightly quieter cycle for documentation this time around.
Three more DocBook template files have been converted to RST; only 21
to go. There are various build improvements and the usual array of
documentation improvements and fixes"
* tag 'docs-4.11' of git://git.lwn.net/linux: (44 commits)
docs / driver-api: Fix structure references in device_link.rst
PM / docs: Fix structure references in device.rst
Add a target to check broken external links in the Documentation
Documentation: Fix linux-api list typo
Documentation: DocBook/Makefile comment typo
Improve sparse documentation
Documentation: make Makefile.sphinx no-ops quieter
Documentation: DMA-ISA-LPC.txt
Documentation: input: fix path to input code definitions
docs: Remove the copyright year from conf.py
docs: Fix a warning in the Korean HOWTO.rst translation
PM / sleep / docs: Convert PM notifiers document to reST
PM / core / docs: Convert sleep states API document to reST
PM / core: Update kerneldoc comments in pm.h
doc-rst: Fix recursive make invocation from macros
doc-rst: Delete output of failed dot-SVG conversion
doc-rst: Break shell command sequences on failure
Documentation/sphinx: make targets independent of Sphinx work for HAVE_SPHINX=0
doc-rst: fixed cleandoc target when used with O=dir
Documentation/sphinx: prevent generation of .pyc files in the source tree
...
SLUB creates a per-cache directory under /sys/kernel/slab which hosts a
bunch of debug files. Usually, there aren't that many caches on a
system and this doesn't really matter; however, if memcg is in use, each
cache can have per-cgroup sub-caches. SLUB creates the same directories
for these sub-caches under /sys/kernel/slab/$CACHE/cgroup.
Unfortunately, because there can be a lot of cgroups, active or
draining, the product of the numbers of caches, cgroups and files in
each directory can reach a very high number - hundreds of thousands is
commonplace. Millions and beyond aren't difficult to reach either.
What's under /sys/kernel/slab is primarily for debugging and the
information and control on the a root cache already cover its
sub-caches. While having a separate directory for each sub-cache can be
helpful for development, it doesn't make much sense to pay this amount
of overhead by default.
This patch introduces a boot parameter slub_memcg_sysfs which determines
whether to create sysfs directories for per-memcg sub-caches. It also
adds CONFIG_SLUB_MEMCG_SYSFS_ON which determines the boot parameter's
default value and defaults to 0.
[akpm@linux-foundation.org: kset_unregister(NULL) is legal]
Link: http://lkml.kernel.org/r/20170204145203.GB26958@mtj.duckdns.org
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Here is the big tty/serial driver patchset for 4.11-rc1.
Not much here, but a lot of little fixes and individual serial driver
updates all over the subsystem. Majority are for the sh-sci driver and
platform (the arch-specific changes have acks from the maintainer).
The start of the "serial bus" code is here as well, but nothing is
converted to use it yet. That work is still ongoing, hopefully will
start to show up across different subsystems for 4.12 (bluetooth is one
major place that will be used.)
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWK2lDg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylwfwCgyExa4x8Lur2nZyu8cgcaVRU68VAAoNQh0WJt
EZdEhEkRMt4d64j+ApYI
=iv7x
-----END PGP SIGNATURE-----
Merge tag 'tty-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver updates from Greg KH:
"Here is the big tty/serial driver patchset for 4.11-rc1.
Not much here, but a lot of little fixes and individual serial driver
updates all over the subsystem. Majority are for the sh-sci driver and
platform (the arch-specific changes have acks from the maintainer).
The start of the "serial bus" code is here as well, but nothing is
converted to use it yet. That work is still ongoing, hopefully will
start to show up across different subsystems for 4.12 (bluetooth is
one major place that will be used.)
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (109 commits)
tty: pl011: Work around QDF2400 E44 stuck BUSY bit
atmel_serial: Use the fractional divider when possible
tty: Remove extra include in HVC console tty framework
serial: exar: Enable MSI support
serial: exar: Move register defines from uapi header to consumer site
serial: pci: Remove unused pci_boards entries
serial: exar: Move Commtech adapters to 8250_exar as well
serial: exar: Fix feature control register constants
serial: exar: Fix initialization of EXAR registers for ports > 0
serial: exar: Fix mapping of port I/O resources
serial: sh-sci: fix hardware RX trigger level setting
tty/serial: atmel: ensure state is restored after suspending
serial: 8250_dw: Avoid "too much work" from bogus rx timeout interrupt
serdev: ttyport: check whether tty_init_dev() fails
serial: 8250_pci: make pciserial_detach_ports() static
ARM: dts: STiH410-b2260: Enable HW flow-control
ARM: dts: STiH407-family: Use new Pinctrl groups
ARM: dts: STiH407-pinctrl: Add Pinctrl group for HW flow-control
ARM: dts: STiH410-b2260: Identify the UART RTS line
dt-bindings: serial: Update 'uart-has-rtscts' description
...
Here is the big char/misc driver patchset for 4.11-rc1.
Lots of different driver subsystems updated here. Rework for the hyperv
subsystem to handle new platforms better, mei and w1 and extcon driver
updates, as well as a number of other "minor" driver updates. Full
details are in the shortlog below.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWK2iRQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynhFACguVE+/ixj5u5bT5DXQaZNai/6zIAAmgMWwd/t
YTD2cwsJsGbTT1fY3SUe
=CiSI
-----END PGP SIGNATURE-----
Merge tag 'char-misc-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the big char/misc driver patchset for 4.11-rc1.
Lots of different driver subsystems updated here: rework for the
hyperv subsystem to handle new platforms better, mei and w1 and extcon
driver updates, as well as a number of other "minor" driver updates.
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (169 commits)
goldfish: Sanitize the broken interrupt handler
x86/platform/goldfish: Prevent unconditional loading
vmbus: replace modulus operation with subtraction
vmbus: constify parameters where possible
vmbus: expose hv_begin/end_read
vmbus: remove conditional locking of vmbus_write
vmbus: add direct isr callback mode
vmbus: change to per channel tasklet
vmbus: put related per-cpu variable together
vmbus: callback is in softirq not workqueue
binder: Add support for file-descriptor arrays
binder: Add support for scatter-gather
binder: Add extra size to allocator
binder: Refactor binder_transact()
binder: Support multiple /dev instances
binder: Deal with contexts in debugfs
binder: Support multiple context managers
binder: Split flat_binder_object
auxdisplay: ht16k33: remove private workqueue
auxdisplay: ht16k33: rework input device initialization
...
Pull s390 updates from Martin Schwidefsky:
- New entropy generation for the pseudo random number generator.
- Early boot printk output via sclp to help debug crashes on boot. This
needs to be enabled with a kernel parameter.
- Add proper no-execute support with a bit in the page table entry.
- Bug fixes and cleanups.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (65 commits)
s390/syscall: fix single stepped system calls
s390/zcrypt: make ap_bus explicitly non-modular
s390/zcrypt: Removed unneeded debug feature directory creation.
s390: add missing "do {} while (0)" loop constructs to multiline macros
s390/mm: add cond_resched call to kernel page table dumper
s390: get rid of MACHINE_HAS_PFMF and MACHINE_HAS_HPAGE
s390/mm: make memory_block_size_bytes available for !MEMORY_HOTPLUG
s390: replace ACCESS_ONCE with READ_ONCE
s390: Audit and remove any remaining unnecessary uses of module.h
s390: mm: Audit and remove any unnecessary uses of module.h
s390: kernel: Audit and remove any unnecessary uses of module.h
s390/kdump: Use "LINUX" ELF note name instead of "CORE"
s390: add no-execute support
s390: report new vector facilities
s390: use correct input data address for setup_randomness
s390/sclp: get rid of common response code handling
s390/sclp: don't add new lines to each printed string
s390/sclp: make early sclp code readable
s390/sclp: disable early sclp code as soon as the base sclp driver is active
s390/sclp: move early printk code to drivers
...
Pull x86 cpufeature updates from Ingo Molnar:
"The main changes in this cycle were related to enable ring-3
MONITOR/MWAIT instructions support on supported CPUs, by Grzegorz
Andrejczuk and Piotr Luc"
* 'x86-cpufeature-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpufeature: Move RING3MWAIT feature to avoid conflicts
x86/cpufeature: Enable RING3MWAIT for Knights Mill
x86/cpufeature: Enable RING3MWAIT for Knights Landing
x86/cpufeature: Add RING3MWAIT to CPU features
x86/elf: Add HWCAP2 to expose ring 3 MONITOR/MWAIT
x86/msr: Add MSR_MISC_FEATURE_ENABLES and RING3MWAIT bit
x86/cpufeature: Add AVX512_VPOPCNTDQ feature
Pull RCU updates from Ingo Molnar:
"The RCU changes in this cycle are:
- Dynticks updates, consolidating open-coded counter accesses into a
well-defined API
- SRCU updates: Simplify algorithm, add formal verification
- Documentation updates
- Miscellaneous fixes
- Torture-test updates
Most of the diffstat comes from the relatively large documentation
update"
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (42 commits)
srcu: Reduce probability of SRCU ->unlock_count[] counter overflow
rcutorture: Add CBMC-based formal verification for SRCU
srcu: Force full grace-period ordering
srcu: Implement more-efficient reader counts
rcu: Adjust FQS offline checks for exact online-CPU detection
rcu: Check cond_resched_rcu_qs() state less often to reduce GP overhead
rcu: Abstract extended quiescent state determination
rcu: Abstract dynticks extended quiescent state enter/exit operations
rcu: Add lockdep checks to synchronous expedited primitives
rcu: Eliminate unused expedited_normal counter
llist: Clarify comments about when locking is needed
rcu: Fix comment in rcu_organize_nocb_kthreads()
rcu: Enable RCU tracepoints by default to aid in debugging
rcu: Make rcu_cpu_starting() use its "cpu" argument
rcu: Add comment headers to expedited-grace-period counter functions
rcu: Don't wake rcuc/X kthreads on NOCB CPUs
rcu: Re-enable TASKS_RCU for User Mode Linux
rcu: Once again use NMI-based stack traces in stall warnings
rcu: Remove short-term CPU kicking
rcu: Add long-term CPU kicking
...
Pull timer updates from Thomas Gleixner:
"Nothing exciting, just the usual pile of fixes, updates and cleanups:
- A bunch of clocksource driver updates
- Removal of CONFIG_TIMER_STATS and the related /proc file
- More posix timer slim down work
- A scalability enhancement in the tick broadcast code
- Math cleanups"
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
hrtimer: Catch invalid clockids again
math64, tile: Fix build failure
clocksource/drivers/arm_arch_timer:: Mark cyclecounter __ro_after_init
timerfd: Protect the might cancel mechanism proper
timer_list: Remove useless cast when printing
time: Remove CONFIG_TIMER_STATS
clocksource/drivers/arm_arch_timer: Work around Hisilicon erratum 161010101
clocksource/drivers/arm_arch_timer: Introduce generic errata handling infrastructure
clocksource/drivers/arm_arch_timer: Remove fsl-a008585 parameter
clocksource/drivers/arm_arch_timer: Add dt binding for hisilicon-161010101 erratum
clocksource/drivers/ostm: Add renesas-ostm timer driver
clocksource/drivers/ostm: Document renesas-ostm timer DT bindings
clocksource/drivers/tcb_clksrc: Use 32 bit tcb as sched_clock
clocksource/drivers/gemini: Add driver for the Cortina Gemini
clocksource: add DT bindings for Cortina Gemini
clockevents: Add a clkevt-of mechanism like clksrc-of
tick/broadcast: Reduce lock cacheline contention
timers: Omit POSIX timer stuff from task_struct when disabled
x86/timer: Make delay() work during early bootup
delay: Add explanation of udelay() inaccuracy
...
* Expose per-DIMM error counts in sysfs (Aaron Miller)
* Add T2080 l2-cache support to mpc85xx (Chris Packham)
* Random other small improvements/cleanups/fixlets
-----BEGIN PGP SIGNATURE-----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=7YI0
-----END PGP SIGNATURE-----
Merge tag 'edac_for_4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp
Pull EDAC updates from Borislav Petkov:
- Make amd64_edac still load on a machine with unpopulated nodes +
cleanups (Yazen Ghannam)
- Expose per-DIMM error counts in sysfs (Aaron Miller)
- Add T2080 l2-cache support to mpc85xx (Chris Packham)
- Random other small improvements/cleanups/fixlets
* tag 'edac_for_4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
EDAC, mce_amd: Print IPID and Syndrome on a separate line
EDAC, amd64: Bump driver version
MAINTAINERS, EDAC: Update email for Thor Thayer
EDAC, fsl_ddr: Make locally used symbols static
EDAC, mpc85xx: Add T2080 l2-cache support
EDAC, amd64: Add x86cpuid sanity check during init
EDAC, amd64: Don't treat ECC disabled as failure
EDAC: Add routine to check if MC devices list is empty
EDAC, amd64: Remove unused printing macros
EDAC, amd64: Rework messages in ecc_enabled()
EDAC, amd64: Move global code out of instance functions
EDAC, amd64: Free unused memory when init_one_instance() fails
EDAC, mce_amd: Give more context to deferred error message
EDAC, i7300: Test for the second channel properly
EDAC, sb_edac: Get rid of ->show_interleave_mode()
EDAC: Expose per-DIMM error counts in sysfs
EDAC, amd64: Save and return err code from probe_one_instance()
EDAC, i82975x: Add ioremap_nocache() error handling
EDAC: Fix typos in enum mem_type comments
EDAC: Make dev_attr_sdram_scrub_rate static
The goldfish platform code registers the platform device unconditionally
which causes havoc in several ways if the goldfish_pdev_bus driver is
enabled:
- Access to the hardcoded physical memory region, which is either not
available or contains stuff which is completely unrelated.
- Prevents that the interrupt of the serial port can be requested
- In case of a spurious interrupt it goes into a infinite loop in the
interrupt handler of the pdev_bus driver (which needs to be fixed
seperately).
Add a 'goldfish' command line option to make the registration opt-in when
the platform is compiled in.
I'm seriously grumpy about this engineering trainwreck, which has seven
SOBs from Intel developers for 50 lines of code. And none of them figured
out that this is broken. Impressive fail!
Fixes: ddd70cf93d ("goldfish: platform device for x86")
Reported-by: Gabriel C <nix.or.die@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
I'm starting document of the raid5-cache feature. Please note this is a
kernel doc instead of a mdadm manual, so I don't add the details about
how to use the feature in mdadm side.
Cc: NeilBrown <neilb@suse.com>
Reviewed-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Having a command line option to flip the errata handling for a
particular erratum is a little bit unusual, and it's vastly superior to
pass this in the DT. By common consensus, it's best to kill off the
command line parameter.
Signed-off-by: Ding Tianhong <dingtianhong@huawei.com>
[Mark: split patch, reword commit message]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Enable ring 3 MONITOR/MWAIT for Intel Xeon Phi x200 codenamed Knights
Landing.
Presence of this feature cannot be detected automatically (by reading any
other MSR) therefore it is required to explicitly check for the family and
model of the CPU before attempting to enable it.
Signed-off-by: Grzegorz Andrejczuk <grzegorz.andrejczuk@intel.com>
Cc: Piotr.Luc@intel.com
Cc: dave.hansen@linux.intel.com
Link: http://lkml.kernel.org/r/1484918557-15481-5-git-send-email-grzegorz.andrejczuk@intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Two of the example command lines use an argument to echo of "-c" which
isn't valid in (most versions of) echo causing these examples to fail.
Correct the argument to "-n" which works correctly.
Signed-off-by: Steven Price <steven@ecrips.co.uk>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The old csrowX sysfs directories have per-csrow error counters, but the
new dimmX directories do not currently expose error counts.
EDAC already keeps these counts, add them to sysfs so per-DIMM counts
are still available when CONFIG_EDAC_LEGACY_SYSFS=n.
Signed-off-by: Aaron Miller <aaronmiller@fb.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20161103220153.3997328-1-aaronmiller@fb.com
Signed-off-by: Borislav Petkov <bp@suse.de>
Use the early sclp code to provide a boot console. This boot console
is available if the kernel parameter "earlyprintk" has been specified,
just like it works for other architectures that also provide an early
boot console.
This makes debugging of early problems much easier, since now we
finally have working console output even before memory detection is
running.
The boot console will be automatically disabled as soon as another
console will be registered.
Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
This allows enabling earlycon for devices with a Lantiq serial console
by splitting lqasc_serial_port_write() from lqasc_console_write() and
re-using the new function for earlycon's write callback.
The kernel-parameter name matches the driver name ("lantiq"), similar
to how other drivers implement this.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull swiotlb fixes from Konrad Rzeszutek Wilk:
"This has one fix to make i915 work when using Xen SWIOTLB, and a
feature from Geert to aid in debugging of devices that can't do DMA
outside the 32-bit address space.
The feature from Geert is on top of v4.10 merge window commit
(specifically you pulling my previous branch), as his changes were
dependent on the Documentation/ movement patches.
I figured it would just easier than me trying than to cherry-pick the
Documentation patches to satisfy git.
The patches have been soaking since 12/20, albeit I updated the last
patch due to linux-next catching an compiler error and adding an
Tested-and-Reported-by tag"
* 'stable/for-linus-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb:
swiotlb: Export swiotlb_max_segment to users
swiotlb: Add swiotlb=noforce debug option
swiotlb: Convert swiotlb_force from int to enum
x86, swiotlb: Simplify pci_swiotlb_detect_override()
Sometimes, the users may require a quirk to be provided from ACPI subsystem
core to prevent a GPE from flooding.
Normally, if a GPE cannot be dispatched, ACPICA core automatically prevents
the GPE from firing. But there are cases the GPE is dispatched by _Lxx/_Exx
provided via AML table, and OSPM is lacking of the knowledge to get
_Lxx/_Exx correctly executed to handle the GPE, thus the GPE flooding may
still occur.
The existing quirk mechanism can be enabled/disabled using the following
commands to prevent such kind of GPE flooding during runtime:
# echo mask > /sys/firmware/acpi/interrupts/gpe00
# echo unmask > /sys/firmware/acpi/interrupts/gpe00
To avoid GPE flooding during boot, we need a boot stage mechanism.
This patch provides such a boot stage quirk mechanism to stop this kind of
GPE flooding. This patch doesn't fix any feature gap but since the new
feature gaps could be found in the future endlessly, and can disappear if
the feature gaps are filled, providing a boot parameter rather than a DMI
table should suffice.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=53071
Link: https://bugzilla.kernel.org/show_bug.cgi?id=117481
Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/887793
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The IMA binary_runtime_measurements list is currently in platform native
format.
To allow restoring a measurement list carried across kexec with a
different endianness than the targeted kernel, this patch defines
little-endian as the canonical format. For big endian systems wanting
to save/restore the measurement list from a system with a different
endianness, a new boot command line parameter named "ima_canonical_fmt"
is defined.
Considerations: use of the "ima_canonical_fmt" boot command line option
will break existing userspace applications on big endian systems
expecting the binary_runtime_measurements list to be in platform native
format.
Link: http://lkml.kernel.org/r/1480554346-29071-10-git-send-email-zohar@linux.vnet.ibm.com
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Acked-by: Dmitry Kasatkin <dmitry.kasatkin@gmail.com>
Cc: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Andreas Steffen <andreas.steffen@strongswan.org>
Cc: Josh Sklar <sklar@linux.vnet.ibm.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Stewart Smith <stewart@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
On architectures like arm64, swiotlb is tied intimately to the core
architecture DMA support. In addition, ZONE_DMA cannot be disabled.
To aid debugging and catch devices not supporting DMA to memory outside
the 32-bit address space, add a kernel command line option
"swiotlb=noforce", which disables the use of bounce buffers.
If specified, trying to map memory that cannot be used with DMA will
fail, and a rate-limited warning will be printed.
Note that io_tlb_nslabs is set to 1, which is the minimal supported
value.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-----BEGIN PGP SIGNATURE-----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=LjVq
-----END PGP SIGNATURE-----
Merge tag 'edac/v4.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac
Pull edac updates from Mauro Carvalho Chehab:
"This contains the conversion of the EDAC uAPI documentation to ReST
and the addition of the EDAC kAPI documentation to the driver-api
docs.
It also splits the EDAC headers by their functions"
* tag 'edac/v4.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac:
EDAC: Document HW_EVENT_ERR_DEFERRED type
edac.rst: move concepts dictionary from edac.h
edac: fix kenel-doc markups at edac.h
edac: fix kernel-doc tags at the drivers/edac_*.h
edac: adjust docs location at MAINTAINERS and 00-INDEX
driver-api: create an edac.rst file with EDAC documentation
edac: move documentation from edac_mc.c to edac_core.h
edac: move documentation from edac_pci*.c to edac_pci.h
edac: move documentation from edac_device to edac_core.h
edac: rename edac_core.h to edac_mc.h
edac: move EDAC device definitions to drivers/edac/edac_device.h
edac: move EDAC PCI definitions to drivers/edac/edac_pci.h
docs-rst: admin-guide: add documentation for EDAC
edac.txt: Improve documentation, adding RAS introduction
edac.txt: update information about newer Intel CPUs
edac.txt: remove info that the Nehalem EDAC is experimental
edac.txt: convert EDAC documentation to ReST
edac.txt: add a section explaining the dimmX and rankX directories
edac: edac_core.h: remove prototype for edac_pci_reset_delay_period()
edac: edac_core.h: get rid of unused kobj_complete
Some kernel-doc tags don't provide good descriptions or use
a different style. Adjust them.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
EDAC is part of the Kernel's RAS facilities, with is useful for
system admins to detect errors. So, add it to the admin's guide.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Here's the tty/serial patchset for 4.10-rc1.
It's been a quiet kernel cycle for this subsystem, just a small number
of changes. A few new serial drivers, and some cleanups to the old
vgacon logic, and other minor serial driver changes as well.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWFAwDQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylcngCgko5+aPLnHENLNIaHhHlfdMbhy+EAn2H8wkzY
bEf+BG4CJDb6nZWERcUQ
=STpQ
-----END PGP SIGNATURE-----
Merge tag 'tty-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial updates from Greg KH:
"Here's the tty/serial patchset for 4.10-rc1.
It's been a quiet kernel cycle for this subsystem, just a small number
of changes. A few new serial drivers, and some cleanups to the old
vgacon logic, and other minor serial driver changes as well.
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (54 commits)
serial: 8250_mid fix calltrace when hotplug 8250 serial controller
console: Move userspace I/O out of console_lock to fix lockdep warning
tty: nozomi: avoid sprintf buffer overflow
serial: 8250_pci: Detach low-level driver during PCI error recovery
serial: core: don't check port twice in a row
mxs-auart: count FIFO overrun errors
serial: 8250_dw: Add support for IrDA SIR mode
serial: 8250: Expose set_ldisc function
serial: 8250: Add IrDA to UART capabilities
serial: 8250_dma: power off device after TX is done
serial: 8250_port: export serial8250_rpm_{get|put}_tx()
serial: sunsu: Free memory when probe fails
serial: sunhv: Free memory when remove() is called
vt: fix Scroll Lock LED trigger name
tty: typo in comments in drivers/tty/vt/keyboard.c
tty: amba-pl011: Add earlycon support for SBSA UART
tty: nozomi: use permission-specific DEVICE_ATTR variants
tty: serial: Make the STM32 serial port depend on it's arch
serial: ifx6x60: Free memory when probe fails
serial: ioc4_serial: Free memory when kzalloc fails during probe
...
- New cpufreq driver for Broadcom STB SoCs and a Device Tree binding
for it (Markus Mayer).
- Support for ARM Integrator/AP and Integrator/CP in the generic
DT cpufreq driver and elimination of the old Integrator cpufreq
driver (Linus Walleij).
- Support for the zx296718, r8a7743 and r8a7745, Socionext UniPhier,
and PXA SoCs in the the generic DT cpufreq driver (Baoyou Xie,
Geert Uytterhoeven, Masahiro Yamada, Robert Jarzmik).
- cpufreq core fix to eliminate races that may lead to using
inactive policy objects and related cleanups (Rafael Wysocki).
- cpufreq schedutil governor update to make it use SCHED_FIFO
kernel threads (instead of regular workqueues) for doing delayed
work (to reduce the response latency in some cases) and related
cleanups (Viresh Kumar).
- New cpufreq sysfs attribute for resetting statistics (Markus
Mayer).
- cpufreq governors fixes and cleanups (Chen Yu, Stratos Karafotis,
Viresh Kumar).
- Support for using generic cpufreq governors in the intel_pstate
driver (Rafael Wysocki).
- Support for per-logical-CPU P-state limits and the EPP/EPB
(Energy Performance Preference/Energy Performance Bias) knobs
in the intel_pstate driver (Srinivas Pandruvada).
- New CPU ID for Knights Mill in intel_pstate (Piotr Luc).
- intel_pstate driver modification to use the P-state selection
algorithm based on CPU load on platforms with the system profile
in the ACPI tables set to "mobile" (Srinivas Pandruvada).
- intel_pstate driver cleanups (Arnd Bergmann, Rafael Wysocki,
Srinivas Pandruvada).
- cpufreq powernv driver updates including fast switching support
(for the schedutil governor), fixes and cleanus (Akshay Adiga,
Andrew Donnellan, Denis Kirjanov).
- acpi-cpufreq driver rework to switch it over to the new CPU
offline/online state machine (Sebastian Andrzej Siewior).
- Assorted cleanups in cpufreq drivers (Wei Yongjun, Prashanth
Prakash).
- Idle injection rework (to make it use the regular idle path
instead of a home-grown custom one) and related powerclamp
thermal driver updates (Peter Zijlstra, Jacob Pan, Petr Mladek,
Sebastian Andrzej Siewior).
- New CPU IDs for Atom Z34xx and Knights Mill in intel_idle (Andy
Shevchenko, Piotr Luc).
- intel_idle driver cleanups and switch over to using the new CPU
offline/online state machine (Anna-Maria Gleixner, Sebastian
Andrzej Siewior).
- cpuidle DT driver update to support suspend-to-idle properly
(Sudeep Holla).
- cpuidle core cleanups and misc updates (Daniel Lezcano, Pan Bian,
Rafael Wysocki).
- Preliminary support for power domains including CPUs in the
generic power domains (genpd) framework and related DT bindings
(Lina Iyer).
- Assorted fixes and cleanups in the generic power domains (genpd)
framework (Colin Ian King, Dan Carpenter, Geert Uytterhoeven).
- Preliminary support for devices with multiple voltage regulators
and related fixes and cleanups in the Operating Performance Points
(OPP) library (Viresh Kumar, Masahiro Yamada, Stephen Boyd).
- System sleep state selection interface rework to make it easier
to support suspend-to-idle as the default system suspend method
(Rafael Wysocki).
- PM core fixes and cleanups, mostly related to the interactions
between the system suspend and runtime PM frameworks (Ulf Hansson,
Sahitya Tummala, Tony Lindgren).
- Latency tolerance PM QoS framework imorovements (Andrew
Lutomirski).
- New Knights Mill CPU ID for the Intel RAPL power capping driver
(Piotr Luc).
- Intel RAPL power capping driver fixes, cleanups and switch over
to using the new CPU offline/online state machine (Jacob Pan,
Thomas Gleixner, Sebastian Andrzej Siewior).
- Fixes and cleanups in the exynos-ppmu, exynos-nocp, rk3399_dmc,
rockchip-dfi devfreq drivers and the devfreq core (Axel Lin,
Chanwoo Choi, Javier Martinez Canillas, MyungJoo Ham, Viresh
Kumar).
- Fix for false-positive KASAN warnings during resume from ACPI S3
(suspend-to-RAM) on x86 (Josh Poimboeuf).
- Memory map verification during resume from hibernation on x86 to
ensure a consistent address space layout (Chen Yu).
- Wakeup sources debugging enhancement (Xing Wei).
- rockchip-io AVS driver cleanup (Shawn Lin).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=vhxI
-----END PGP SIGNATURE-----
Merge tag 'pm-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"Again, cpufreq gets more changes than the other parts this time (one
new driver, one old driver less, a bunch of enhancements of the
existing code, new CPU IDs, fixes, cleanups)
There also are some changes in cpuidle (idle injection rework, a
couple of new CPU IDs, online/offline rework in intel_idle, fixes and
cleanups), in the generic power domains framework (mostly related to
supporting power domains containing CPUs), and in the Operating
Performance Points (OPP) library (mostly related to supporting devices
with multiple voltage regulators)
In addition to that, the system sleep state selection interface is
modified to make it easier for distributions with unchanged user space
to support suspend-to-idle as the default system suspend method, some
issues are fixed in the PM core, the latency tolerance PM QoS
framework is improved a bit, the Intel RAPL power capping driver is
cleaned up and there are some fixes and cleanups in the devfreq
subsystem
Specifics:
- New cpufreq driver for Broadcom STB SoCs and a Device Tree binding
for it (Markus Mayer)
- Support for ARM Integrator/AP and Integrator/CP in the generic DT
cpufreq driver and elimination of the old Integrator cpufreq driver
(Linus Walleij)
- Support for the zx296718, r8a7743 and r8a7745, Socionext UniPhier,
and PXA SoCs in the the generic DT cpufreq driver (Baoyou Xie,
Geert Uytterhoeven, Masahiro Yamada, Robert Jarzmik)
- cpufreq core fix to eliminate races that may lead to using inactive
policy objects and related cleanups (Rafael Wysocki)
- cpufreq schedutil governor update to make it use SCHED_FIFO kernel
threads (instead of regular workqueues) for doing delayed work (to
reduce the response latency in some cases) and related cleanups
(Viresh Kumar)
- New cpufreq sysfs attribute for resetting statistics (Markus Mayer)
- cpufreq governors fixes and cleanups (Chen Yu, Stratos Karafotis,
Viresh Kumar)
- Support for using generic cpufreq governors in the intel_pstate
driver (Rafael Wysocki)
- Support for per-logical-CPU P-state limits and the EPP/EPB (Energy
Performance Preference/Energy Performance Bias) knobs in the
intel_pstate driver (Srinivas Pandruvada)
- New CPU ID for Knights Mill in intel_pstate (Piotr Luc)
- intel_pstate driver modification to use the P-state selection
algorithm based on CPU load on platforms with the system profile in
the ACPI tables set to "mobile" (Srinivas Pandruvada)
- intel_pstate driver cleanups (Arnd Bergmann, Rafael Wysocki,
Srinivas Pandruvada)
- cpufreq powernv driver updates including fast switching support
(for the schedutil governor), fixes and cleanus (Akshay Adiga,
Andrew Donnellan, Denis Kirjanov)
- acpi-cpufreq driver rework to switch it over to the new CPU
offline/online state machine (Sebastian Andrzej Siewior)
- Assorted cleanups in cpufreq drivers (Wei Yongjun, Prashanth
Prakash)
- Idle injection rework (to make it use the regular idle path instead
of a home-grown custom one) and related powerclamp thermal driver
updates (Peter Zijlstra, Jacob Pan, Petr Mladek, Sebastian Andrzej
Siewior)
- New CPU IDs for Atom Z34xx and Knights Mill in intel_idle (Andy
Shevchenko, Piotr Luc)
- intel_idle driver cleanups and switch over to using the new CPU
offline/online state machine (Anna-Maria Gleixner, Sebastian
Andrzej Siewior)
- cpuidle DT driver update to support suspend-to-idle properly
(Sudeep Holla)
- cpuidle core cleanups and misc updates (Daniel Lezcano, Pan Bian,
Rafael Wysocki)
- Preliminary support for power domains including CPUs in the generic
power domains (genpd) framework and related DT bindings (Lina Iyer)
- Assorted fixes and cleanups in the generic power domains (genpd)
framework (Colin Ian King, Dan Carpenter, Geert Uytterhoeven)
- Preliminary support for devices with multiple voltage regulators
and related fixes and cleanups in the Operating Performance Points
(OPP) library (Viresh Kumar, Masahiro Yamada, Stephen Boyd)
- System sleep state selection interface rework to make it easier to
support suspend-to-idle as the default system suspend method
(Rafael Wysocki)
- PM core fixes and cleanups, mostly related to the interactions
between the system suspend and runtime PM frameworks (Ulf Hansson,
Sahitya Tummala, Tony Lindgren)
- Latency tolerance PM QoS framework imorovements (Andrew Lutomirski)
- New Knights Mill CPU ID for the Intel RAPL power capping driver
(Piotr Luc)
- Intel RAPL power capping driver fixes, cleanups and switch over to
using the new CPU offline/online state machine (Jacob Pan, Thomas
Gleixner, Sebastian Andrzej Siewior)
- Fixes and cleanups in the exynos-ppmu, exynos-nocp, rk3399_dmc,
rockchip-dfi devfreq drivers and the devfreq core (Axel Lin,
Chanwoo Choi, Javier Martinez Canillas, MyungJoo Ham, Viresh Kumar)
- Fix for false-positive KASAN warnings during resume from ACPI S3
(suspend-to-RAM) on x86 (Josh Poimboeuf)
- Memory map verification during resume from hibernation on x86 to
ensure a consistent address space layout (Chen Yu)
- Wakeup sources debugging enhancement (Xing Wei)
- rockchip-io AVS driver cleanup (Shawn Lin)"
* tag 'pm-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (127 commits)
devfreq: rk3399_dmc: Don't use OPP structures outside of RCU locks
devfreq: rk3399_dmc: Remove dangling rcu_read_unlock()
devfreq: exynos: Don't use OPP structures outside of RCU locks
Documentation: intel_pstate: Document HWP energy/performance hints
cpufreq: intel_pstate: Support for energy performance hints with HWP
cpufreq: intel_pstate: Add locking around HWP requests
PM / sleep: Print active wakeup sources when blocking on wakeup_count reads
PM / core: Fix bug in the error handling of async suspend
PM / wakeirq: Fix dedicated wakeirq for drivers not using autosuspend
PM / Domains: Fix compatible for domain idle state
PM / OPP: Don't WARN on multiple calls to dev_pm_opp_set_regulators()
PM / OPP: Allow platform specific custom set_opp() callbacks
PM / OPP: Separate out _generic_set_opp()
PM / OPP: Add infrastructure to manage multiple regulators
PM / OPP: Pass struct dev_pm_opp_supply to _set_opp_voltage()
PM / OPP: Manage supply's voltage/current in a separate structure
PM / OPP: Don't use OPP structure outside of rcu protected section
PM / OPP: Reword binding supporting multiple regulators per device
PM / OPP: Fix incorrect cpu-supply property in binding
cpuidle: Add a kerneldoc comment to cpuidle_use_deepest_state()
..
It's another busy cycle for the docs tree, as the sphinx conversion
continues. Highlights include:
- Further work on PDF output, which remains a bit of a pain but should be
more solid now.
- Five more DocBook template files converted to Sphinx. Only 27 to go...
Lots of plain-text files have also been converted and integrated.
- Images in binary formats have been replaced with more source-friendly
versions.
- Various bits of organizational work, including the renaming of various
files discussed at the kernel summit.
- New documentation for the device_link mechanism.
...and, of course, lots of typo fixes and small updates.
-----BEGIN PGP SIGNATURE-----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=A0EV
-----END PGP SIGNATURE-----
Merge tag 'docs-4.10' of git://git.lwn.net/linux
Pull documentation update from Jonathan Corbet:
"These are the documentation changes for 4.10.
It's another busy cycle for the docs tree, as the sphinx conversion
continues. Highlights include:
- Further work on PDF output, which remains a bit of a pain but
should be more solid now.
- Five more DocBook template files converted to Sphinx. Only 27 to
go... Lots of plain-text files have also been converted and
integrated.
- Images in binary formats have been replaced with more
source-friendly versions.
- Various bits of organizational work, including the renaming of
various files discussed at the kernel summit.
- New documentation for the device_link mechanism.
... and, of course, lots of typo fixes and small updates"
* tag 'docs-4.10' of git://git.lwn.net/linux: (193 commits)
dma-buf: Extract dma-buf.rst
Update Documentation/00-INDEX
docs: 00-INDEX: document directories/files with no docs
docs: 00-INDEX: remove non-existing entries
docs: 00-INDEX: add missing entries for documentation files/dirs
docs: 00-INDEX: consolidate process/ and admin-guide/ description
scripts: add a script to check if Documentation/00-INDEX is sane
Docs: change sh -> awk in REPORTING-BUGS
Documentation/core-api/device_link: Add initial documentation
core-api: remove an unexpected unident
ppc/idle: Add documentation for powersave=off
Doc: Correct typo, "Introdution" => "Introduction"
Documentation/atomic_ops.txt: convert to ReST markup
Documentation/local_ops.txt: convert to ReST markup
Documentation/assoc_array.txt: convert to ReST markup
docs-rst: parse-headers.pl: cleanup the documentation
docs-rst: fix media cleandocs target
docs-rst: media/Makefile: reorganize the rules
docs-rst: media: build SVG from graphviz files
docs-rst: replace bayer.png by a SVG image
...
scripts/ver_linux has been rewritten as an awk script; update
documentation to reflect this fact.
Signed-off-by: Kevin Peng <kkpengboy@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Update kernel-parameters.txt to add Documentation
for powersave=off.
Signed-off-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
This corrects a set of spelling mistakes, probably from an
automated conversion.
Signed-off-by: Sanjeev Gupta <ghane0@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
It seems we can't have literal blocks in footnotes, which almost actually
makes some sense. So just use basic ``monospace`` instead.
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Now that oops-tracing.rst has only information about
stack dumps found on OOPS, and bug-hunting.rst has only
information about how to identify the source code line
associated with a stack dump, let's merge them and
improve the information inside it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The tainted kernels info is not directly related to
the oops tracing. So, let's move it to a separate file.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Better organize the admin guide documentation by moving the
bug bisect to a separate file.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The document shows a really old procedure for bug hunting that
nobody uses anymore. Remove such section, and update the
remaining documentation to reflect the procedures used
currently.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Now that we don't have automatic syntax highlighting, use the code-block
directive with the explicitly selected language, where appropriate.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The creation of the admin and process guides is a great thing, but, without
care, we risk replacing a messy docs directory with a few messy Sphinx
books. In an attempt to head that off and show what I'm thinking, here's a
set of tweaks that, I think, make the existing Sphinx-formatted docs a bit
more accessible.
The document has not been touched in over 11 years and doesn't reflect how
profiling is done in the perf era.
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The last release of this tool was for 2.6.28; it's hard to see how it has
any relevance to current kernels.
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The admin guide is a good start, but it's time to turn it into something
better than an unordered blob of files. This is a first step in that
direction. The TOC has been split up and annotated, the guides have been
reordered, and minor tweaks have been applied to a few of them.
One consequence of splitting up the TOC is that we don't really want to use
:numbered: anymore, since the count resets every time and there doesn't
seem to be a way to change that. Eventually we probably want to group the
documents into sub-books, at which point we can go back to a single TOC,
but it's probably early to do that.
Reviewed-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The index should only be included if the build of the sub-folder is done
with the html-builder (HTML output).
Signed-off-by: Markus Heiser <markus.heiser@darmarit.de>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The previous patch renamed several files that are cross-referenced
along the Kernel documentation. Adjust the links to point to
the right places.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Place README, REPORTING-BUGS, SecurityBugs and kernel-parameters
on an user's manual book.
As we'll be numbering the user's manual, remove the manual
numbering from SecurityBugs.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
- Fix identatio for the document title;
- remove its index;
- create a table for hash algorithm to be used;
- use quote blocks where needed;
- use monotonic fonts for parameters;
- adjust whitespaces and blank lines;
- Fix case on section titles;
- add it to the user's book.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
