Commit Graph

112 Commits

Author SHA1 Message Date
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00
Milian Wolff 3192f1ed3d perf tools: Support running perf binaries with a dash in their name
Previously the part behind "perf-" was interpreted as an internal perf
command. If the suffix could not be handled, the execution was stopped.
This makes it impossible to launch perf binaries that got renamed to
have the `perf-` prefix. This is e.g. the case for appimages (e.g.
"perf-x86_64.AppImage"), but would also apply to all other scenarios
where users symlink or rename perf themselves:

Status quo with the broken behavior:

  $ ln -s ./perf ./perf-custom-suffix
  $ ./perf-custom-suffix list
  cannot handle custom-suffix internally$

Also note the missing newline at the end of the error message.

With this patch applied, the above works properly:

  $ ./perf-custom-suffix list

  List of pre-defined events (to be used in -e):
  ...

Signed-off-by: Milian Wolff <milian.wolff@kdab.com>
Acked-by: David Ahern <dsahern@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Yao Jin <yao.jin@linux.intel.com>
Link: http://lkml.kernel.org/r/20170911111422.31903-1-milian.wolff@kdab.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-09-12 12:48:54 -03:00
Arnaldo Carvalho de Melo 8e99b6d453 tools include: Adopt strstarts() from the kernel
Replacing prefixcmp(), same purpose, inverted result, so standardize on
the kernel variant, to reduce silly differences among tools/ and the
kernel sources, making it easier for people to work in both codebases.

And then doing:

	if (strstarts(option, "no-"))

Looks clearer than doing:

	if (!prefixcmp(option, "no-"))

To figure out if option starts witn "no-".

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-kaei42gi7lpa8subwtv7eug8@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-07-20 15:46:10 -03:00
Arnaldo Carvalho de Melo 5ab8c689f7 perf tools: Move event prototypes from util.h to event.h
More needs to be done to have the actual functions and variables in a
smaller .c file that can then be included in the python binding,
avoiding dragging more stuff into it.

Link: http://lkml.kernel.org/n/tip-uecxz7cqkssouj7tlxrkqpl4@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-04-25 15:30:47 -03:00
Arnaldo Carvalho de Melo 7a8ef4c4b5 perf tools: Remove string.h, unistd.h and sys/stat.h from util.h
Not needed in this header, added to the places that need FILE,
putchar(), access() and a few other prototypes.

Link: http://lkml.kernel.org/n/tip-xxtdsl6nsna82j7puwbdjqhs@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-04-24 13:43:33 -03:00
Arnaldo Carvalho de Melo a3b70b3bb3 perf tools: Remove stale prototypes from builtin.h
Some, like prune_packed_objects() are clearly git specific, others
don't have implementations and some are used in just one place, make
them static.

Link: http://lkml.kernel.org/n/tip-faj3c5dnttf3hurv4pujut8n@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-04-24 13:43:33 -03:00
Arnaldo Carvalho de Melo 9607ad3a63 perf tools: Add signal.h to places using its definitions
And remove it from util.h, disentangling it a bit more.

Link: http://lkml.kernel.org/n/tip-2zg9s5nx90yde64j3g4z2uhk@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-04-20 13:22:43 -03:00
Arnaldo Carvalho de Melo a43783aeec perf tools: Include errno.h where needed
Removing it from util.h, part of an effort to disentangle the includes
hell, that makes changes to util.h or something included by it to cause
a complete rebuild of the tools.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-ztrjy52q1rqcchuy3rubfgt2@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-04-19 13:01:51 -03:00
Arnaldo Carvalho de Melo 28a9bb9621 perf tools: Ditch unused PATH_SEP, STRIP_EXTENSION
Should make sense for windows, where git is supported.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-lzxlhmqrizk72d0zcsreggy8@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-04-19 13:01:48 -03:00
Arnaldo Carvalho de Melo 877a7a1105 perf tools: Add include <linux/kernel.h> where ARRAY_SIZE() is used
To pave the way for further cleanups where linux/kernel.h may stop being
included in some header.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-qqxan6tfsl6qx3l0v3nwgjvk@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-04-19 13:01:44 -03:00
Arnaldo Carvalho de Melo 427748068a perf tools: Remove die() call
We can just use the exit() right after the branch calling die().

Link: http://lkml.kernel.org/n/tip-90athn06d7atf2jkpfvq1iic@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-04-04 11:36:22 -03:00
Arnaldo Carvalho de Melo c68677014b perf tools: Remove support for command aliases
This came from 'git', but isn't documented anywhere in
tools/perf/Documentation/, looks like baggage we can do without, ditch
it.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-e7uwkn60t4hmlnwj99ba4t2s@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-28 11:19:59 -03:00
Arnaldo Carvalho de Melo b0ad8ea664 perf tools: Remove unused 'prefix' from builtin functions
We got it from the git sources but never used it for anything, with the
place where this would be somehow used remaining:

  static int run_builtin(struct cmd_struct *p, int argc, const char **argv)
  {
	prefix = NULL;
	if (p->option & RUN_SETUP)
		prefix = NULL; /* setup_perf_directory(); */

Ditch it.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-uw5swz05vol0qpr32c5lpvus@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-27 11:58:09 -03:00
Arnaldo Carvalho de Melo ecc4c5614b perf tools: Propagate perf_config() errors
Previously these were being ignored, sometimes silently.

Stop doing that, emitting debug messages and handling the errors.

Testing it:

  $ cat ~/.perfconfig
  cat: /home/acme/.perfconfig: No such file or directory
  $ perf stat -e cycles usleep 1

   Performance counter stats for 'usleep 1':

           938,996      cycles:u

       0.003813731 seconds time elapsed

  $ perf top --stdio
  Error:
  You may not have permission to collect system-wide stats.

  Consider tweaking /proc/sys/kernel/perf_event_paranoid,
  <SNIP>
  [ perf record: Captured and wrote 0.019 MB perf.data (7 samples) ]
  [acme@jouet linux]$ perf report --stdio
  # To display the perf.data header info, please use --header/--header-only options.
  # Overhead  Command  Shared Object      Symbol
  # ........  .......  .................  .........................
    71.77%  usleep   libc-2.24.so       [.] _dl_addr
    27.07%  usleep   ld-2.24.so         [.] _dl_next_ld_env_entry
     1.13%  usleep   [kernel.kallsyms]  [k] page_fault
  $
  $ touch ~/.perfconfig
  $ ls -la ~/.perfconfig
  -rw-rw-r--. 1 acme acme 0 Jan 27 12:14 /home/acme/.perfconfig
  $
  $ perf stat -e instructions usleep 1

   Performance counter stats for 'usleep 1':

           244,610      instructions:u

       0.000805383 seconds time elapsed

  $
  [root@jouet ~]# chown acme.acme ~/.perfconfig
  [root@jouet ~]# perf stat -e cycles usleep 1
    Warning: File /root/.perfconfig not owned by current user or root, ignoring it.

   Performance counter stats for 'usleep 1':

           937,615      cycles

       0.000836931 seconds time elapsed
  #

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-j2rq96so6xdqlr8p8rd6a3jx@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-01-27 12:23:33 -03:00
Namhyung Kim d01f4e8db2 perf ftrace: Introduce new 'ftrace' tool
The 'perf ftrace' command is a simple wrapper of kernel's ftrace
functionality.  It only supports single thread tracing currently and
just reads trace_pipe in text and then write it to stdout.

Committer notes:

Testing it:

  # perf ftrace -f function_graph usleep 123456
  <SNIP>
  2)               |  SyS_nanosleep() {
  2)               |    _copy_from_user() {
  <SNIP>
  2)   0.900 us    |      }
  2)   1.354 us    |    }
  2)               |    hrtimer_nanosleep() {
  2)   0.062 us    |      __hrtimer_init();
  2)               |      do_nanosleep() {
  2)               |        hrtimer_start_range_ns() {
  <SNIP>
  2)   5.025 us    |        }
  2)               |        schedule() {
  2)   0.125 us    |          rcu_note_context_switch();
  2)   0.057 us    |          _raw_spin_lock();
  2)               |          deactivate_task() {
  2)   0.369 us    |            update_rq_clock.part.77();
  2)               |            dequeue_task_fair() {
  <SNIP>
  2) + 22.453 us   |            }
  2) + 23.736 us   |          }
  2)               |          pick_next_task_fair() {
  <SNIP>
  2) + 47.167 us   |          }
  2)               |          pick_next_task_idle() {
  <SNIP>
  2)   4.462 us    |          }
  ------------------------------------------
  2)  usleep-20387  =>    <idle>-0
  ------------------------------------------

  2)   0.806 us    |  switch_mm_irqs_off();
  ------------------------------------------
  2)    <idle>-0    =>  usleep-20387
  ------------------------------------------

  2)   0.151 us    |          finish_task_switch();
  2) @ 123597.2 us |        }
  2)   0.037 us    |        _cond_resched();
  2)               |        hrtimer_try_to_cancel() {
  2)   0.064 us    |          hrtimer_active();
  2)   0.353 us    |        }
  2) @ 123605.3 us |      }
  2) @ 123606.2 us |    }
  2) @ 123608.3 us |  } /* SyS_nanosleep */
  2)               |  __do_page_fault() {
 <SNIP>

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jeremy Eder <jeder@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>,
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/n/tip-r1hgmsj4dxny8arn3o9mw512@git.kernel.org
[ Various foward port fixes, add man page ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-01-26 11:43:01 -03:00
Soramichi AKIYAMA d25ed5d9fa perf tools: Move two variables usied in libperf from perf.c
The use_browser and perf_version_string variables are both declared in
perf.c but they are also referenced by other functions of libperf.a.

Therefore a user linking an own main() with libperf.a must declare those
two variables in their files even if the files never use the browser or
the version information.

This patch fixes this issue by moving use_browser and
perf_version_string out of perf.c to some other files.

Signed-off-by: Soramichi Akiyama <akiyama@m.soramichi.jp>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170117002237.c1aec0ce3b4d675dca018deb@m.soramichi.jp
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-01-17 11:36:45 -03:00
Arnaldo Carvalho de Melo 355637717d perf kallsyms: Introduce tool to look for extended symbol information on the running kernel
Its similar to doing grep on a /proc/kallsyms, but it also shows extra
information like the path to the kernel module and the unrelocated
addresses in it, to help in diagnosing problems.

It is also helps demonstrate the use of the symbols routines so that
tool writers can use them more effectively.

Using it:

  $ perf kallsyms e1000_xmit_frame netif_rx usb_stor_set_xfer_buf
  e1000_xmit_frame: [e1000e] /lib/modules/4.9.0+/kernel/drivers/net/ethernet/intel/e1000e/e1000e.ko 0xffffffffc046fc10-0xffffffffc0470bb0 (0x19c80-0x1ac20)
  netif_rx: [kernel] [kernel.kallsyms] 0xffffffff916f03a0-0xffffffff916f0410 (0xffffffff916f03a0-0xffffffff916f0410)
  usb_stor_set_xfer_buf: [usb_storage] /lib/modules/4.9.0+/kernel/drivers/usb/storage/usb-storage.ko 0xffffffffc057aea0-0xffffffffc057af19 (0xf10-0xf89)
  $

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-79bk9pakujn4l4vq0f90klv3@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-01-11 16:48:01 -03:00
Jiri Olsa 7aef3bf3da perf c2c: Add c2c command
Adding c2c command base wirings. Its implementation is going to be added
gradually in following patches.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1474558645-19956-11-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-10-19 13:18:31 -03:00
Arnaldo Carvalho de Melo 8811e8ea14 perf tools: Just pr_debug() about not being able to read cacheline_size
So far the cacheline_size is only useful for the "dcacheline" --sort
order, i.e. if that is not used, which is the norm, then the user
shouldn't care that he is running this, say, on an Android system where
sysconf(_SC_LEVEL1_DCACHE_LINESIZE) and the
/sys/devices/system/cpu/cpu0/cache/index0/coherency_line_size sysfs file
isn't available.

An upcoming patch will emit an warning only for "--sort ...,dcacheline,...".

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Chris Phlipot <cphlipot0@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-580cnkvftunyvt9n7unsholi@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-15 10:08:29 -03:00
Arnaldo Carvalho de Melo 9a3dc28bb0 perf tools: Fallback to reading sysfs to get cacheline size
On systems where sysconf(_SC_LEVEL1_DCACHE_LINESIZE) is not available,
such as musl LIBC and Android's bionic libc.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Chris Phlipot <cphlipot0@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-772obxzby758g7m2wmzcejxz@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-12 15:20:37 -03:00
Arnaldo Carvalho de Melo c8b5f2c96d tools: Introduce str_error_r()
The tools so far have been using the strerror_r() GNU variant, that
returns a string, be it the buffer passed or something else.

But that, besides being tricky in cases where we expect that the
function using strerror_r() returns the error formatted in a provided
buffer (we have to check if it returned something else and copy that
instead), breaks the build on systems not using glibc, like Alpine
Linux, where musl libc is used.

So, introduce yet another wrapper, str_error_r(), that has the GNU
interface, but uses the portable XSI variant of strerror_r(), so that
users rest asured that the provided buffer is used and it is what is
returned.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-d4t42fnf48ytlk8rjxs822tf@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-12 15:19:47 -03:00
Taeung Song 8a0a9c7e91 perf config: Introduce new init() and exit()
Many sub-commands use perf_config() but everytime perf_config() is
called, perf_config() always read config files.  (i.e. user config
'~/.perfconfig' and system config '$(sysconfdir)/perfconfig')

But it is better to use the config set that already contains all config
key-value pairs to avoid this repetitive work reading the config files
in perf_config(). (the config set mean a static variable 'config_set')

In other words, if new perf_config__init() is called, only first time
'config_set' is initialized collecting all configs from the config
files.  And then we could use new perf_config() like old perf_config().
When a sub-command finished, free the config set by perf_config__exit()
at run_builtin().

If we do, 'config_set' can be reused wherever perf_config() is called
and a feature of old perf_config() is the same as new perf_config() work
without the repetitive work that read the config files.

In summary, in order to use features about configuration,
we can call the functions at perf.c and other source files as below.

    # initialize a config set
    perf_config__init()

    # configure actual variables from a config set
    perf_config()

    # eliminate allocated config set
    perf_config__exit()

    # destroy existing config set and initialize a new config set.
    perf_config__refresh()

Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1466691272-24117-3-git-send-email-treeze.taeung@gmail.com
[ 'init' counterpart is 'exit', not 'finish' ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-23 17:20:04 -03:00
Taeung Song 41840d211c perf config: Move config declarations from util/cache.h to util/config.h
Lately util/config.h has been added but util/cache.h has declarations of
functions and a global variable for config features.

To manage codes about configuration at one spot, move them to
util/config.h and let source files that need config features include
config.h And if the source files that included previous cache.h need
only config.h, remove including cache.h.

Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1466672119-4852-2-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-23 08:51:41 -03:00
Arnaldo Carvalho de Melo e861964a26 perf tools: Remove --perf-dir and --work-dir
Completely unused in perf, carried along all this time from the initial
copy of git infrastructure, ditch'em.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-wtiln26gyqndprmkl0kdswvi@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-21 13:18:34 -03:00
Arnaldo Carvalho de Melo a29d5c9b81 perf tools: Separate accounting of contexts and real addresses in a stack trace
The perf_sample->ip_callchain->nr value includes all the entries in the
ip_callchain->ip[] array, real addresses and PERF_CONTEXT_{KERNEL,USER,etc},
while what the user expects is that what is in the kernel.perf_event_max_stack
sysctl or in the upcoming per event perf_event_attr.sample_max_stack knob be
honoured in terms of IP addresses in the stack trace.

So match the kernel support and validate chain->nr taking into account
both kernel.perf_event_max_stack and kernel.perf_event_max_contexts_per_stack.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Zefan Li <lizefan@huawei.com>
Link: http://lkml.kernel.org/n/tip-mgx0jpzfdq4uq4abfa40byu0@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-05-16 23:11:54 -03:00
Masami Hiramatsu 70a6898fdc perf tools: Make alias handler to check return value of strbuf
Make alias handler and sq_quote_argv to check the return value of strbuf
APIs.

In sq_quote_argv() calls die(), but this fix handles strbuf failure as a
special case and returns to caller, since the caller - handle_alias()
also has to check the return value of other strbuf APIs and those checks
can be merged to one if() statement.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20160510054725.6158.84597.stgit@devbox
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-05-10 11:56:52 -03:00
Arnaldo Carvalho de Melo 4cb93446c5 perf tools: Set the maximum allowed stack from /proc/sys/kernel/perf_event_max_stack
There is an upper limit to what tooling considers a valid callchain,
and it was tied to the hardcoded value in the kernel,
PERF_MAX_STACK_DEPTH (127), now that this can be tuned via a sysctl,
make it read it and use that as the upper limit, falling back to
PERF_MAX_STACK_DEPTH for kernels where this sysctl isn't present.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-yjqsd30nnkogvj5oyx9ghir9@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-04-27 10:29:07 -03:00
Taeung Song 58cb9d650b perf config: Remove duplicated set_buildid_dir calls
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1459099340-16911-1-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-03-30 11:14:08 -03:00
Wang Nan b8cbb34906 perf config: Bring perf_default_config to the very beginning at main()
Before this patch each subcommand calls perf_config() by themself,
reading the default configuration together with subcommand specific
options. If a subcommand doesn't have it own options, it needs to call
'perf_config(perf_default_config, NULL)' to ensure .perfconfig is
loaded.

This patch brings perf_config(perf_default_config, NULL) to the very
start of main(), so subcommands don't need to do it.

After this patch, 'llvm.clang-path' works for 'perf trace'.

Signed-off-by: Wang Nan <wangnan0@huawei.com>
Suggested-and-Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1456479154-136027-4-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-26 19:49:16 -03:00
Arnaldo Carvalho de Melo 5104ffb229 perf tools: Use asprintf() for simple string formatting/allocation
No need to use strbuf there, its just a simple alloc+formatting, which
asprintf does just fine.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-6q6cxfhk8c8ypg3tfpo0i2iy@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-25 10:14:50 -03:00
Jiri Olsa dd629cc097 perf tools: Initialize libapi debug output
Setting libapi debug output functions to use perf functions.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1455465826-8426-5-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-16 17:12:59 -03:00
Namhyung Kim 14cbfbeb76 perf report: Show random usage tip on the help line
Currently perf report only shows a help message "For a higher level
overview, try: perf report --sort comm,dso" unconditionally (even if
the sort keys were used).  Add more help tips and show randomly.

Load tips from ${prefix}/share/doc/perf-tip/tips.txt file.

  $ perf report | tail
      0.10%  swapper  [kernel.vmlinux]   [k] irq_exit
      0.09%  swapper  [kernel.vmlinux]   [k] flush_smp_call_function_queue
      0.08%  swapper  [kernel.vmlinux]   [k] native_write_msr_safe
      0.03%  swapper  [kernel.vmlinux]   [k] group_sched_in
      0.01%  perf     [kernel.vmlinux]   [k] native_write_msr_safe

  #
  # (Tip: Search options using a keyword: perf report -h <keyword>)
  #

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1452166913-27046-1-git-send-email-namhyung@kernel.org
[ Renamed it to perf_tip() and the parameter dirname to dirpath to fix the build on older distros ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-01-08 13:15:46 -03:00
Josh Poimboeuf 4b6ab94eab perf subcmd: Create subcmd library
Move the subcommand-related files from perf to a new library named
libsubcmd.a.

Since we're moving files anyway, go ahead and rename 'exec_cmd.*' to
'exec-cmd.*' to be consistent with the naming of all the other files.

Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/c0a838d4c878ab17fee50998811612b2281355c1.1450193761.git.jpoimboe@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-12-17 14:27:14 -03:00
Josh Poimboeuf 46113a54be perf tools: Remove 'perf' from subcmd function and variable names
In preparation for moving exec_cmd.c and run-command.c out of perf and
into a library, remove 'perf' from all the symbol names.

Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/bc3ee82b40b8f396b644fa49e0f7260ce442635b.1450193761.git.jpoimboe@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-12-16 21:34:28 -03:00
Josh Poimboeuf 096d35585b perf tools: Provide subcmd configuration at runtime
Create init functions for exec_cmd.c and pager.c.  This allows their
configuration to be specified at runtime so they can be split out into a
separate library which can be used by other programs.  Their
configuration is stored in a shared subcmd_config struct.

Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/21f5f6b38da72c985a8dcfa185700d03e7eecd1d.1450193761.git.jpoimboe@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-12-16 16:18:16 -03:00
Josh Poimboeuf 2bdb2c2729 perf tools: Save cmdline arguments earlier
perf_env__set_cmdline() only saves the arguments the first time it's
called.  It doesn't need to be called every time the options and
suboptions are parsed.  Instead it can just be called once.

This also has the advantage of making the option parsing code less
perf-specific so it can be moved out to a library.

Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/19b76a5aa1b688bd635bd65d80bbc103a978d75e.1449548395.git.jpoimboe@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-12-09 13:42:03 -03:00
Taeung Song 30862f2c57 perf tools: Add 'perf config' command
The perf configuration file contains many variables to change various
aspects of each of its tools, including output, disk usage, etc.

But looking at the state of configuration is difficult and there's no
documentation about config variables except for the variables in
perfconfig.example exist.

So this patch adds a 'perf-config' command with a '--list' option.

    perf config [options]

    display current perf config variables.
    # perf config -l | --list

Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1447768424-17327-1-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-23 18:31:24 -03:00
Wang Nan 84c86ca12b perf tools: Enable passing bpf object file to --event
By introducing new rules in tools/perf/util/parse-events.[ly], this
patch enables 'perf record --event bpf_file.o' to select events by an
eBPF object file. It calls parse_events_load_bpf() to load that file,
which uses bpf__prepare_load() and finally calls bpf_object__open() for
the object files.

After applying this patch, commands like:

 # perf record --event foo.o sleep

become possible.

However, at this point it is unable to link any useful things onto the
evsel list because the creating of probe points and BPF program
attaching have not been implemented.  Before real events are possible to
be extracted, to avoid perf report error because of empty evsel list,
this patch link a dummy evsel. The dummy event related code will be
removed when probing and extracting code is ready.

Commiter notes:

Using it:

  $ ls -la foo.o
  ls: cannot access foo.o: No such file or directory
  $ perf record --event foo.o sleep
  libbpf: failed to open foo.o: No such file or directory
  event syntax error: 'foo.o'
                       \___ BPF object file 'foo.o' is invalid

  (add -v to see detail)
  Run 'perf list' for a list of valid events

   Usage: perf record [<options>] [<command>]
      or: perf record [<options>] -- <command> [<options>]

      -e, --event <event>   event selector. use 'perf list' to list available events
  $

  $ file /tmp/build/perf/perf.o
  /tmp/build/perf/perf.o: ELF 64-bit LSB relocatable, x86-64, version 1 (SYSV), not stripped
  $ perf record --event /tmp/build/perf/perf.o sleep
  libbpf: /tmp/build/perf/perf.o is not an eBPF object file
  event syntax error: '/tmp/build/perf/perf.o'
                       \___ BPF object file '/tmp/build/perf/perf.o' is invalid

  (add -v to see detail)
  Run 'perf list' for a list of valid events

   Usage: perf record [<options>] [<command>]
      or: perf record [<options>] -- <command> [<options>]

      -e, --event <event>   event selector. use 'perf list' to list available events
  $

  $ file /tmp/foo.o
  /tmp/foo.o: ELF 64-bit LSB relocatable, no machine, version 1 (SYSV), not stripped
  $ perf record --event /tmp/foo.o sleep 1
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.013 MB perf.data ]
  $ perf evlist
  /tmp/foo.o
  $ perf evlist  -v
  /tmp/foo.o: type: 1, size: 112, config: 0x9, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|PERIOD, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, enable_on_exec: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1
  $

So, type 1 is PERF_TYPE_SOFTWARE, config 0x9 is PERF_COUNT_SW_DUMMY, ok.

  $ perf report --stdio
  Error:
  The perf.data file has no samples!
  # To display the perf.data header info, please use --header/--header-only options.
  #
  $

Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1444826502-49291-4-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-28 12:48:12 -03:00
Jiri Olsa a1853e2c6f perf tools: Handle -h and -v options
Adding handling for '-h' and '-v' options to invoke help and version
command respectively.

Current behaviour is:

   $ perf -v
   Unknown option: -v

    Usage: perf [--version] [--help] [OPTIONS] COMMAND [ARGS]
   $ perf -h
   Unknown option: -h

    Usage: perf [--version] [--help] [OPTIONS] COMMAND [ARGS]

New behaviour:

  $ perf -h

   usage: perf [--version] [--help] [OPTIONS] COMMAND [ARGS]

   The most commonly used perf commands are:
     annotate        Read perf.data (created by perf record) and display annotated code
     archive         Create archive with object files with build-ids found in perf.data file
     bench           General framework for benchmark suites
   ...

  $ perf -v
  perf version 4.3.rc3.gc99e32

Updated man page.

Requested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1444068369-20978-10-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-05 16:36:18 -03:00
Arnaldo Carvalho de Melo aa36ddd7af perf env: Introduce read_cpu_topology_map() method
Out of the code to write the cpu topology map in the perf.data file
header.

Now if one needs the CPU topology map for the running machine, one needs
to call perf_env__read_cpu_topology_map(perf_env) and the info will be
stored in perf_env.cpu.

For now we're using a global perf_env variable, that will have its
contents freed after we run a builtin.

v2: Check perf_env__read_cpu_topology_map() return in
    write_cpu_topology() (Kan Liang)

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1441828225-667-5-git-send-email-acme@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-09-14 12:50:28 -03:00
Jiri Olsa 592d5a6ba8 tools lib api fs: Move tracing_path interface into api/fs/tracing_path.c
Moving tracing_path interface into api/fs/tracing_path.c out of util.c.
It seems generic enough to be used by others, and I couldn't think of
better place.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Reviewed-by: Matt Fleming <matt.fleming@intel.com>
Reviewed-by: Raphael Beamonte <raphael.beamonte@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1441180605-24737-5-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-09-04 12:00:45 -03:00
Jiri Olsa 65d4b26510 perf tools: Move tracing_path stuff under same namespace
Renaming all functions touching tracing_path under same namespace. New
interface is:

  char tracing_path[];
  - tracing mount path

  char tracing_events_path[];
  - tracing mount/events path

  void tracing_path_set(const char *mountpoint);
  - setting directly tracing_path(_events), used by --debugfs-dir option

  const char *tracing_path_mount(void);
  - initial setup of tracing_(events)_path, called from perf.c
    mounts debugfs/tracefs if needed and possible

  char *get_tracing_file(const char *name);
  void put_tracing_file(char *file);
  - get/put tracing file path

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Raphael Beamonte <raphael.beamonte@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1441180605-24737-4-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-09-02 16:30:47 -03:00
Jiri Olsa f6a09af7de perf tools: Remove mountpoint arg from perf_debugfs_mount
It's not used by any caller. We either detect the mountpoint or use
hardcoded one.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Raphael Beamonte <raphael.beamonte@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1441180605-24737-3-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-09-02 16:30:47 -03:00
Jiri Olsa 9f30fffc78 perf tools: Do not change lib/api/fs/debugfs directly
The tracing_events_path is the variable we want to change via
--debugfs-dir option, not the debugfs_mountpoint.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Reviewed-by: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Raphael Beamonte <raphael.beamonte@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1440596813-12844-4-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-08-28 14:53:53 -03:00
Yunlong Song 7335399a6a perf tools: Fix the bash completion problem of 'perf --*'
The perf-completion.sh uses a predefined string '--help --version
--exec-path --html-path --paginate --no-pager --perf-dir --work-tree
--debugfs-dir' for the bash completion of 'perf --*', which has two
problems:

 Problem 1: If the options of perf are changed (see handle_options() in
 perf.c), the perf-completion.sh has to be changed at the same time. If
 not, the bash completion of 'perf --*' and the options which perf
 really supports will be inconsistent.

 Problem 2: When typing another single character after 'perf --', e.g.
 'h', and hit TAB key to get the bash completion of 'perf --h', the
 character 'h' disappears at once. This is not what we want, we wish the
 bash completion can return '--help --html-path' and then we can
 continue to choose one.

 To solve this problem, we add '--list-opts' to perf, which now supports
 'perf --list-opts' directly, and its result can be used in bash
 completion now.

Example:

 Before this patch:

 $ perf --h                 <-- hit TAB key after character 'h'
 $ perf --                  <-- 'h' disappears and no required result

 After this patch:

 $ perf --h                 <-- hit TAB key after character 'h'
 --help       --html-path   <-- the required result

Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1425032491-20224-8-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-02-27 15:52:28 -03:00
Yunlong Song ed45752061 perf list: Avoid confusion of perf output and the next command prompt
Distinguish the output of 'perf list --list-opts' or 'perf --list-cmds'
with the next command prompt, which also happens in other cases (e.g.
record, report ...).

Example:

Before this patch:

 $perf list --list-opts
 --raw-dump $          <-- the output and the next command prompt are at
                           the same line

After this patch:

 $perf list --list-opts
 --raw-dump
 $                     <-- the new line

Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1425032491-20224-6-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-02-27 15:52:09 -03:00
Jiri Olsa 2245bf1410 perf tools: Add new 'perf data' command
Adding new 'perf data' command to provide operations over data files.

The 'perf data convert' sub command is coming in following patch, but
there's possibility for other useful commands like 'perf data ls' (to
display perf data file in directory in ls style).

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jeremie Galarneau <jgalar@efficios.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1424470628-5969-3-git-send-email-jolsa@kernel.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-02-25 12:42:25 -03:00
Jiri Olsa 99ce8e9fce perf tools: Add --buildid-dir option to set cache directory
Adding --buildid-dir to be able to set specific cache directory. It's
going to be handy for buildid tests coming in shortly.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1417460789-13874-4-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-12-09 09:14:35 -03:00
Masami Hiramatsu b2348e1d8a perf: Use strerror_r instead of strerror
Use strerror_r instead of strerror in error messages for thread-safety.
This also introduce STRERR_BUFSIZE macro for the default size of message
buffer for strerror_r.

Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naohiro Aota <naota@elisp.net>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20140814022232.3545.14026.stgit@kbuild-fedora.novalocal
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-08-15 10:54:29 -03:00
Jiri Olsa 78a1b503c8 perf tools: Fix perf usage string leftover
Fixing perf usage string leftover pointed out by Namhyung.

Reported-by: Namhyung Kim <namhyung@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-vkcf53oultknsh3ue9fhin94@git.kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
2014-07-28 15:58:13 +02:00