Commit Graph

91 Commits

Author SHA1 Message Date
Arnd Bergmann b70661c708 net: smc91x: use run-time configuration on all ARM machines
The smc91x driver traditionally gets configured at compile-time
for whichever hardware it runs on. This no longer works on
ARM as we continue to move to building all-in-one kernels.

Most ARM configurations with this driver already use run-time
configuration through DT or through platform_data, but a
few have not been converted yet.

I've checked all ARM boards that use this driver in their
legacy board files, and converted the ones that were using
compile-time configuration in smc91x.h to behave like the
other ones and provide the interrupt polarity along with
the MMIO configuration (width, stride) at platform device
creation time.

In particular, these combinations were previously selectable
in Kconfig but in fact broken:

- sa1100 assabet plus pleb
- msm combined with any other armv6/v7 platform
- pxa-idp combined with any non-DMA pxa variant
- LogicPD PXA270 combined with any other pxa
- nomadik combined with any other armv4/v5 platform,
  e.g. versatile.

None of these seem critical enough to warrant a backport
to stable, but it would be nice to clean this up for good.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
----
I would like the patch to get merged through netdev, after
Robert and/or Linus have verified it on at least some hardware.

There are a few other non-ARM platforms using this driver,
I could do the same patch for those if we want to take
it further.

 arch/arm/mach-msm/board-halibut.c    |   8 ++++-
 arch/arm/mach-msm/board-qsd8x50.c    |   8 ++++-
 arch/arm/mach-pxa/idp.c              |   5 +++
 arch/arm/mach-pxa/lpd270.c           |   8 ++++-
 arch/arm/mach-realview/core.c        |   7 ++++
 arch/arm/mach-realview/realview_eb.c |   2 +-
 arch/arm/mach-sa1100/neponset.c      |   6 ++++
 arch/arm/mach-sa1100/pleb.c          |   7 ++++
 drivers/net/ethernet/smsc/smc91x.c   |   9 +++--
 drivers/net/ethernet/smsc/smc91x.h   | 114 ++----------------------------------------------------------
 10 files changed, 57 insertions(+), 117 deletions(-)
Tested-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-28 12:56:56 -05:00
Mark Rutland cbed8388bf arm: realview: specify PMU types
Now that we can specify which PMU variant we're likely to deal with, do
so in the realview board code. This will allow us to split the ARMv6,
ARMv7, and XScale PMU drivers.

The Realview EB may be used with ARMv6 or ARMv7 CPUs, but luckily
there's only a single ARMv7 CPU, so we can match that explicitly to
determine whether or not we have an ARMv7 PMU.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Olof Johansson <olof@lixom.net>
Cc: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Olof Johansson <olof@lixom.net>
2015-02-06 00:12:55 -08:00
Linus Torvalds eb3d3ec567 Merge branch 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm into next
Pull ARM updates from Russell King:

 - Major clean-up of the L2 cache support code.  The existing mess was
   becoming rather unmaintainable through all the additions that others
   have done over time.  This turns it into a much nicer structure, and
   implements a few performance improvements as well.

 - Clean up some of the CP15 control register tweaks for alignment
   support, moving some code and data into alignment.c

 - DMA properties for ARM, from Santosh and reviewed by DT people.  This
   adds DT properties to specify bus translations we can't discover
   automatically, and to indicate whether devices are coherent.

 - Hibernation support for ARM

 - Make ftrace work with read-only text in modules

 - add suspend support for PJ4B CPUs

 - rework interrupt masking for undefined instruction handling, which
   allows us to enable interrupts earlier in the handling of these
   exceptions.

 - support for big endian page tables

 - fix stacktrace support to exclude stacktrace functions from the
   trace, and add save_stack_trace_regs() implementation so that kprobes
   can record stack traces.

 - Add support for the Cortex-A17 CPU.

 - Remove last vestiges of ARM710 support.

 - Removal of ARM "meminfo" structure, finally converting us solely to
   memblock to handle the early memory initialisation.

* 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: (142 commits)
  ARM: ensure C page table setup code follows assembly code (part II)
  ARM: ensure C page table setup code follows assembly code
  ARM: consolidate last remaining open-coded alignment trap enable
  ARM: remove global cr_no_alignment
  ARM: remove CPU_CP15 conditional from alignment.c
  ARM: remove unused adjust_cr() function
  ARM: move "noalign" command line option to alignment.c
  ARM: provide common method to clear bits in CPU control register
  ARM: 8025/1: Get rid of meminfo
  ARM: 8060/1: mm: allow sub-architectures to override PCI I/O memory type
  ARM: 8066/1: correction for ARM patch 8031/2
  ARM: 8049/1: ftrace/add save_stack_trace_regs() implementation
  ARM: 8065/1: remove last use of CONFIG_CPU_ARM710
  ARM: 8062/1: Modify ldrt fixup handler to re-execute the userspace instruction
  ARM: 8047/1: rwsem: use asm-generic rwsem implementation
  ARM: l2c: trial at enabling some Cortex-A9 optimisations
  ARM: l2c: add warnings for stuff modifying aux_ctrl register values
  ARM: l2c: print a warning with L2C-310 caches if the cache size is modified
  ARM: l2c: remove old .set_debug method
  ARM: l2c: kill L2X0_AUX_CTRL_MASK before anyone else makes use of this
  ...
2014-06-05 15:57:04 -07:00
Russell King 39b53458cc ARM: l2c: realview: improve commentry about the L2 cache requirements
Add better commentry about the L2 cache requirements on these platforms.
Unfortunately, the auxiliary control register is not pre-set to indicate
the correct cache parameters, so we have to manually program these.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-05-30 00:49:57 +01:00
Linus Walleij e4ecf2bda2 ARM: plat-versatile: convert LEDs to platform device
The LEDs were initialized unconditionally with an fs_initcall()
which doesn't play well with multiplatform. Convert the driver
to a platform device and convert all boards with these LEDs
to register a platform device and pass the register as a
resource instead.

Tested successfully on the Versatile/AB and RealView PB1176.

Cc: Bryan Wu <cooloney@gmail.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Pawel Moll <pawel.moll@arm.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-02-27 14:56:19 +01:00
Robin Holt 7b6d864b48 reboot: arm: change reboot_mode to use enum reboot_mode
Preparing to move the parsing of reboot= to generic kernel code forces
the change in reboot_mode handling to use the enum.

[akpm@linux-foundation.org: fix arch/arm/mach-socfpga/socfpga.c]
Signed-off-by: Robin Holt <holt@sgi.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Russ Anderson <rja@sgi.com>
Cc: Robin Holt <holt@sgi.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-09 10:33:29 -07:00
Olof Johansson f8060f5446 Initial irqchip init infrastructure and GIC and VIC clean-ups
This creates irqchip initialization infrastructure from Thomas
 Petazzoni. The VIC and GIC irqchip code is moved to drivers/irqchips
 and adapted to use the new infrastructure. All DT enabled platforms
 using GIC and VIC are converted over to use the new irqchip_init.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQEcBAABAgAGBQJQ8ZobAAoJEMhvYp4jgsXiihIH/2VvxmSHZb0e3jN6AR0B42b7
 9EwX0IE0B23t91hNTwdzzmTJQYA7pMmWkgHNfd3vIeqSepJAmrVv/gp4iM9CtPwE
 KNh+kDWOK2ZsOH4Vb0lYRJHN8WQOIQHuCUr9+MdYLNOgf/pPL6G/Y9kv9A1e7fTC
 W+tFRjC5N1ilZMGyowX12L1wnwDk6kHzed6YV6bskC17cZ9/pg8PhSVbM4A/3kAv
 NXYKqbXJb+eCsWGXg/knZXOL6V9gBwvVYoe4O9X3nQ0226AWB9caad8l8tchAjRB
 fmrYF1tbkpOWPnLxhvQy5b5MJichJgTMJHh7RgiEcc/3f63kOljjlx4QKiqHvT0=
 =q7gm
 -----END PGP SIGNATURE-----

Merge tag 'gic-vic-to-irqchip' of git://sources.calxeda.com/kernel/linux into next/cleanup

From Rob Herring:

Initial irqchip init infrastructure and GIC and VIC clean-ups

This creates irqchip initialization infrastructure from Thomas
Petazzoni. The VIC and GIC irqchip code is moved to drivers/irqchips
and adapted to use the new infrastructure. All DT enabled platforms
using GIC and VIC are converted over to use the new irqchip_init.

* tag 'gic-vic-to-irqchip' of git://sources.calxeda.com/kernel/linux:
  irqchip: Move ARM vic.h to include/linux/irqchip/arm-vic.h
  ARM: picoxcell: use common irqchip_init function
  ARM: spear: use common irqchip_init function
  irqchip: Move ARM VIC to drivers/irqchip
  ARM: samsung: remove unused tick.h
  ARM: remove unneeded vic.h includes
  ARM: remove mach .handle_irq for VIC users
  ARM: VIC: set handle_arch_irq in VIC initialization
  ARM: VIC: shrink down vic.h
  irqchip: Move ARM gic.h to include/linux/irqchip/arm-gic.h
  ARM: use common irqchip_init for GIC init
  irqchip: Move ARM GIC to drivers/irqchip
  ARM: remove mach .handle_irq for GIC users
  ARM: GIC: set handle_arch_irq in GIC initialization
  ARM: GIC: remove direct use of gic_raise_softirq
  ARM: GIC: remove assembly ifdefs from gic.h
  ARM: mach-ux500: use SGI0 to wake up the other core
  arm: add set_handle_irq() to register the parent IRQ controller handler function
  irqchip: add basic infrastructure
  irqchip: add to the directories part of the IRQ subsystem in MAINTAINERS

Fixed up massive merge conflicts with the timer cleanup due to adjacent changes:

Signed-off-by: Olof Johansson <olof@lixom.net>

Conflicts:
	arch/arm/mach-bcm/board_bcm.c
	arch/arm/mach-cns3xxx/cns3420vb.c
	arch/arm/mach-ep93xx/adssphere.c
	arch/arm/mach-ep93xx/edb93xx.c
	arch/arm/mach-ep93xx/gesbc9312.c
	arch/arm/mach-ep93xx/micro9.c
	arch/arm/mach-ep93xx/simone.c
	arch/arm/mach-ep93xx/snappercl15.c
	arch/arm/mach-ep93xx/ts72xx.c
	arch/arm/mach-ep93xx/vision_ep9307.c
	arch/arm/mach-highbank/highbank.c
	arch/arm/mach-imx/mach-imx6q.c
	arch/arm/mach-msm/board-dt-8960.c
	arch/arm/mach-netx/nxdb500.c
	arch/arm/mach-netx/nxdkn.c
	arch/arm/mach-netx/nxeb500hmi.c
	arch/arm/mach-nomadik/board-nhk8815.c
	arch/arm/mach-picoxcell/common.c
	arch/arm/mach-realview/realview_eb.c
	arch/arm/mach-realview/realview_pb1176.c
	arch/arm/mach-realview/realview_pb11mp.c
	arch/arm/mach-realview/realview_pba8.c
	arch/arm/mach-realview/realview_pbx.c
	arch/arm/mach-socfpga/socfpga.c
	arch/arm/mach-spear13xx/spear1310.c
	arch/arm/mach-spear13xx/spear1340.c
	arch/arm/mach-spear13xx/spear13xx.c
	arch/arm/mach-spear3xx/spear300.c
	arch/arm/mach-spear3xx/spear310.c
	arch/arm/mach-spear3xx/spear320.c
	arch/arm/mach-spear3xx/spear3xx.c
	arch/arm/mach-spear6xx/spear6xx.c
	arch/arm/mach-tegra/board-dt-tegra20.c
	arch/arm/mach-tegra/board-dt-tegra30.c
	arch/arm/mach-u300/core.c
	arch/arm/mach-ux500/board-mop500.c
	arch/arm/mach-ux500/cpu-db8500.c
	arch/arm/mach-versatile/versatile_ab.c
	arch/arm/mach-versatile/versatile_dt.c
	arch/arm/mach-versatile/versatile_pb.c
	arch/arm/mach-vexpress/v2m.c
	include/asm-generic/vmlinux.lds.h
2013-01-14 19:55:03 -08:00
Rob Herring 520f7bd733 irqchip: Move ARM gic.h to include/linux/irqchip/arm-gic.h
Now that we have GIC moved to drivers/irqchip and all GIC DT init for
platforms using irqchip_init, move gic.h and update the remaining
includes.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Anton Vorontsov <avorontsov@mvista.com>
Cc: Kukjin Kim <kgene.kim@samsung.com>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: David Brown <davidb@codeaurora.org>
Cc: Daniel Walker <dwalker@fifo99.com>
Cc: Bryan Huntsman <bryanh@codeaurora.org>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Magnus Damm <magnus.damm@gmail.com>
Cc: Viresh Kumar <viresh.linux@gmail.com>
Cc: Shiraz Hashim <shiraz.hashim@st.com>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Samuel Ortiz <sameo@linux.intel.com>
2013-01-12 10:47:32 -06:00
Rob Herring 1d5cc604f4 ARM: remove mach .handle_irq for GIC users
Now that the GIC initialization sets up the handle_arch_irq pointer, we
can remove it for all machines and make it static.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Anton Vorontsov <avorontsov@mvista.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: David Brown <davidb@codeaurora.org>
Cc: Daniel Walker <dwalker@fifo99.com>
Cc: Bryan Huntsman <bryanh@codeaurora.org>
Acked-by: Tony Lindgren <tony@atomide.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Magnus Damm <magnus.damm@gmail.com>
Cc: Dinh Nguyen <dinguyen@altera.com>
Cc: Shiraz Hashim <shiraz.hashim@st.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Olof Johansson <olof@lixom.net>
Acked-by: Arnd Bergmann <arnd@arndb.de>
2013-01-12 10:47:20 -06:00
Stephen Warren 6bb27d7349 ARM: delete struct sys_timer
Now that the only field in struct sys_timer is .init, delete the struct,
and replace the machine descriptor .timer field with the initialization
function itself.

This will enable moving timer drivers into drivers/clocksource without
having to place a public prototype of each struct sys_timer object into
include/linux; the intent is to create a single of_clocksource_init()
function that determines which timer driver to initialize by scanning
the device dtree, much like the proposed irqchip_init() at:
http://www.spinics.net/lists/arm-kernel/msg203686.html

Includes mach-omap2 fixes from Igor Grinberg.

Tested-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-12-24 09:36:38 -07:00
Steve Capper 810883f059 ARM: 7594/1: Add .smp entry for REALVIEW_EB
The REALVIEW EB board can host tiles with multiple cores thus needs
to be able to initialise SMP. There is, however, no .smp entry in
the MACHINE_START struct for REALVIEW_EB.

This patch adds the appropriate .smp entry to this struct.

Signed-off-by: Steve Capper <steve.capper@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-12-11 00:19:30 +00:00
Linus Torvalds 8f446a7a06 ARM: soc: driver specific changes
- A long-coming conversion of various platforms to a common LED
   infrastructure
 - AT91 is moved over to use the newer MCI driver for MMC
 - Pincontrol conversions for samsung platforms
 - DT bindings for gscaler on samsung
 - i2c driver fixes for tegra, acked by i2c maintainer
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJQaO48AAoJEIwa5zzehBx3excP/ieEkRhvfnWxdYST6ekvGIQr
 nEyskOh2rVjgYKmSXUJyKSbvG+7bZ8VIxvPvojeAJ/R84pTFMzbR2F0CaPKzAuSW
 inDt6c0Bnx1NZlfUTAoXcz7feyq9zHYNs9BCLoPU0bYNchCCqcWSKzqnpXk2ph/P
 LFnmNa0j6a4E3QJYAjM2zFvc3Tgk+MWTq1fWwNFvsWTh2WbQtmB/iGnzT5Xs4XQh
 u1SSx5tz0lcF5zQRGmJhXgL5+nnIP4sRwRUBAkpe3Gv5cM6WBVEBRDANa5QpbUL2
 RXK5YyCTIln2Me4bPk32zEBLjiZ/WXbmiA2uwoqVgy6XToubemDXd0PtKmjj5tZ1
 BkTD1DND7BKBEQnJj/GBECEdvx2FbrKfruoPcJHvXPZ7Svn5Dt/MWYJQIkRFkuhL
 zlVNoDGWlU8nScGrgmTM56UvWmGWC3UFsWSgdVQNfW9yEva+G1FvRUwUH02Ip5Ad
 4r28JFIn6zyjtM99ZHipU6C6Rze2ordC7fl5X5LBLkVOobioblxCAhIhcqkhfKsk
 rFriNsdfYs7SrJA7mK7GzvaMEJgp/5o1noJKXI7ZBcLI8yYagzbQbPu/vGi6G6d3
 0xC7NaTEJbtoXoDAtmtilLRxmw0YCXgVBBGua0K2YKpcRwnzCHNbV4gsLMnDuOXS
 HP4M96LxLHJlLGCxhEme
 =ck7M
 -----END PGP SIGNATURE-----

Merge tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM soc driver specific changes from Olof Johansson:
 - A long-coming conversion of various platforms to a common LED
   infrastructure
 - AT91 is moved over to use the newer MCI driver for MMC
 - Pincontrol conversions for samsung platforms
 - DT bindings for gscaler on samsung
 - i2c driver fixes for tegra, acked by i2c maintainer

Fix up conflicts as per Olof.

* tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (48 commits)
  drivers: bus: omap_l3: use resources instead of hardcoded irqs
  pinctrl: exynos: Fix wakeup IRQ domain registration check
  pinctrl: samsung: Uninline samsung_pinctrl_get_soc_data
  pinctrl: exynos: Correct the detection of wakeup-eint node
  pinctrl: exynos: Mark exynos_irq_demux_eint as inline
  pinctrl: exynos: Handle only unmasked wakeup interrupts
  pinctrl: exynos: Fix typos in gpio/wkup _irq_mask
  pinctrl: exynos: Set pin function to EINT in irq_set_type of GPIO EINTa
  drivers: bus: Move the OMAP interconnect driver to drivers/bus/
  i2c: tegra: dynamically control fast clk
  i2c: tegra: I2_M_NOSTART functionality not supported in Tegra20
  ARM: tegra: clock: remove unused clock entry for i2c
  ARM: tegra: clock: add connection name in i2c clock entry
  i2c: tegra: pass proper name for getting clock
  ARM: tegra: clock: add i2c fast clock entry in clock table
  ARM: EXYNOS: Adds G-Scaler device from Device Tree
  ARM: EXYNOS: Add clock support for G-Scaler
  ARM: EXYNOS: Enable pinctrl driver support for EXYNOS4 device tree enabled platform
  ARM: dts: Add pinctrl node entries for SAMSUNG EXYNOS4210 SoC
  ARM: EXYNOS: skip wakeup interrupt setup if pinctrl driver is used
  ...
2012-10-01 18:46:13 -07:00
Linus Torvalds 61464c8357 ARM: soc: general cleanups
This is a large branch that contains a handful of different cleanups:
 
 - Fixing up the I/O space remapping on PCI on ARM. This is a series
   from Rob Herring that restructures how all pci devices allocate I/O
   space, and it's part of the work to allow multiplatform kernels.
 - A number of cleanup series for OMAP, moving and removing some
   headers, sparse irq rework and in general preparation for
   multiplatform.
 - Final removal of all non-DT boards for Tegra, it is now
   device-tree-only!
 - Removal of a stale platform, nxp4008. It's an old mobile chipset
   that is no longer in use, and was very likely never really used with
   a mainline kernel. We have not been able to find anyone interested
   in keeping it around in the kernel.
 - Removal of the legacy dmaengine driver on tegra
 
 + A handful of other things that I haven't described above.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJQaO1fAAoJEIwa5zzehBx3IPgP/jxoO1flVGNVf0reqqyDro/w
 prZmp8cNVH9uv8xG9n9vawObrMQ8M6jCJ449fEWuAZ58EXrpIPd0kkm/MOmxp8K1
 LNs+q2aXxWpD488+b3RK55g3fksqZutTbn3y6HNuCoLG9l8yT/95KX4IIzfEP2Ch
 1TCNHdkTbf37nTBOmKN0x1kahGpWDrOkf9ysHQq+DXAGF4uwNwtR194dqz3HbDND
 hZqRq7qCLn9OwGRGNicPFoB6UcxwZ/+/+u5sX7nqPGoiPofg977mhWk1DFO15EM3
 S+A6g0dZ+XLsL+fFtOl4snSmrG5Et6qTOP0/ItQJgTG+5YdCS09ohCWJwRCBHbgj
 M5arOkyGFdVAlvX7cUux374sMe0AcqUsEmt79mYuBpIE+pBJaRUoCgDcs9FDZeUB
 U6WcE4AkxMtW7DtmVW+mF4ls9/K6cRXgWMuHCUmt1o3m3Ly9ITT7j+ntXnD9nuYk
 ndoVLR6Vxk2BzlkD0JEtg7FRAS9Wgo2DBix05qM1Qkut2iIZRhFQlqJQpNbeNdii
 /3Lg/hqpAVTZKGCd+paegHez61meyFz2PB2IiE0JKANhKHRCWTWRGgKIXkGyCiXk
 wJ2iRCOlMEpmpJgCBzfI32ER/hnW4s64iDjgksEwz6pEt7xCbhwgmwrpf0H0KsSF
 rLroHOMqyISd/Ha52Vin
 =ck1u
 -----END PGP SIGNATURE-----

Merge tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM soc general cleanups from Olof Johansson:
 "This is a large branch that contains a handful of different cleanups:

   - Fixing up the I/O space remapping on PCI on ARM.  This is a series
     from Rob Herring that restructures how all pci devices allocate I/O
     space, and it's part of the work to allow multiplatform kernels.
   - A number of cleanup series for OMAP, moving and removing some
     headers, sparse irq rework and in general preparation for
     multiplatform.
   - Final removal of all non-DT boards for Tegra, it is now
     device-tree-only!
   - Removal of a stale platform, nxp4008.  It's an old mobile chipset
     that is no longer in use, and was very likely never really used
     with a mainline kernel.  We have not been able to find anyone
     interested in keeping it around in the kernel.
   - Removal of the legacy dmaengine driver on tegra

  + A handful of other things that I haven't described above."

Fix up some conflicts with the staging tree (and because nxp4008 was
removed)

* tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (184 commits)
  ARM: OMAP2+: serial: Change MAX_HSUART_PORTS to 6
  ARM: OMAP4: twl-common: Support for additional devices on i2c1 bus
  ARM: mmp: using for_each_set_bit to simplify the code
  ARM: tegra: harmony: fix ldo7 regulator-name
  ARM: OMAP2+: Make omap4-keypad.h local
  ARM: OMAP2+: Make l4_3xxx.h local
  ARM: OMAP2+: Make l4_2xxx.h local
  ARM: OMAP2+: Make l3_3xxx.h local
  ARM: OMAP2+: Make l3_2xxx.h local
  ARM: OMAP1: Move irda.h from plat to mach
  ARM: OMAP2+: Make hdq1w.h local
  ARM: OMAP2+: Make gpmc-smsc911x.h local
  ARM: OMAP2+: Make gpmc-smc91x.h local
  ARM: OMAP1: Move flash.h from plat to mach
  ARM: OMAP2+: Make debug-devices.h local
  ARM: OMAP1: Move board-voiceblue.h from plat to mach
  ARM: OMAP1: Move board-sx1.h from plat to mach
  ARM: OMAP2+: Make omap-wakeupgen.h local
  ARM: OMAP2+: Make omap-secure.h local
  ARM: OMAP2+: Make ctrl_module_wkup_44xx.h local
  ...
2012-10-01 18:19:05 -07:00
Linus Walleij f9a6aa4303 clk: convert ARM RealView to common clk
This converts the ARM RealView machine over to using the common
clock. The approach is similar to the one used for the Integrator,
and we're reusing the ICST wrapper code.

We have to put the clock intialization in the timer init function
for the clocks to be available when initializing the timer,
keeping them in early_init() is too early for the common clk.

Since we now have to go down and compile drivers/clk/versatile
a CONFIG_COMMON_CLK_VERSATILE symbol has been added so the proper
code gets compiled into the kernel for either machine. A leftover
CLK_VERSATILE in the Integrator Kconfig was fixed up to use
the new symbol as well.

Tested on ARM RealView PB1176.

Cc: Pawel Moll <pawel.moll@arm.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-08-24 17:42:10 -07:00
Sudeep KarkadaNagesha df3d17e068 ARM: pmu: remove arm_pmu_type enumeration
The arm_pmu_type enumeration was initially introduced to identify
different PMU types in the system, the usual one being that on the CPU
(ARM_PMU_DEVICE_CPU). With the removal of the PMU reservation code and
the introduction of devicetree bindings for the CPU PMU, the enumeration
is no longer required.

This patch removes the enumeration and updates the various CPU PMU
platform devices so that they no longer pass an .id field referring
to identify the PMU type.

Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Cc: Olof Johansson <olof@lixom.net>
Cc: Pawel Moll <pawel.moll@arm.com>
Acked-by: Jon Hunter <jon-hunter@ti.com>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Jiandong Zheng <jdzheng@broadcom.com>
Signed-off-by: Sudeep KarkadaNagesha <Sudeep.KarkadaNagesha@arm.com>
[will: cosmetic edits and actual removal of the enum type]
Signed-off-by: Will Deacon <will.deacon@arm.com>
2012-08-23 11:35:51 +01:00
Bryan Wu e031cd513e ARM: mach-realview and mach-versatile: retire custom LED code
This replaces the custom LED trigger code in mach-realview with
some overarching platform code for the plat-versatile family that
will lock down LEDs 2 thru 5 for CPU activity indication. The
day we have 8 core ARM systems the plat-versatile code will have
to become more elaborate.

Tested on RealView PB11MPCore by invoking four different CPU
hogs (yes > /dev/null&) and see the LEDs go on one at a time.
They all go off as the hogs are killed. Tested on the PB1176
as well - just one activity led (led 2) goes on and off with
CPU activity.

(bryan.wu@canonical.com: use ledtrig-cpu instead of ledtrig-arm-cpu)

Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
Acked-by: Pawel Moll <pawel.moll@arm.com>
2012-08-01 11:22:04 +08:00
Arnd Bergmann 2cbe23e3a4 Merge branch 'tegra/cleanups' into next/timer
Conflicts:
	arch/arm/mach-tegra/Makefile
	arch/arm/mach-vexpress/core.h

The tegra Makefile was changed in four different branches
in the same line. This merge should reduce the amount
of churn.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-21 14:27:34 +00:00
Marc Zyngier 7c380f273c ARM: plat-versatile: convert to twd_local_timer_register() interface
Add support for the new smp_twd runtime registration interface
to the RealView/VE platforms, and remove the old compile-time support.
Tested on EB11MP.

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-03-13 13:29:58 +00:00
Olof Johansson a5f17d1f4c Linux 3.3-rc2
.. several days delayed. No reason, I just didn't think of it.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.18 (GNU/Linux)
 
 iQEcBAABAgAGBQJPKF4KAAoJEHm+PkMAQRiGw/YH+wXg2DpZUuHeBK52zMGlJBPc
 DzX11/Uan3Y07gM0JbDzuVxwjX4vdxR2bV6r1qsLP8JEUnE8jyFC32DBGi5WAht7
 F4KU/Uov2Ds5/wzvY4Iuo01C+JftQHXuy/Sbhck1d0LI0yjLejRaw+zuJv0x2/eS
 7YqV+KTGE1lDuJs/Gyq1Vqr1g9831AuS1tv/g3gaqBuN6TcPBFCocaVxzwrUc+y6
 94h26XbbOhQRIz38oqUkiqAGnvYS61ocyBcEiRHf0dXkNSDIINqlgukvd7YTXouA
 jj/w/DWpMRcQuYAgqkrurr9+yWC9hVQcsvvQ5sAQnIPcxoR868sg1pO8Oheq+1g=
 =kUzV
 -----END PGP SIGNATURE-----

Merge tag 'v3.3-rc2' into depends/rmk/for-armsoc

There were conflicts between fixes going in after 3.3-rc1 and
Russell's stable arm-soc base branch. Resolving it in the dependency
branch so that each topic branch shares the same resolution.

Conflicts:
	arch/arm/mach-at91/at91cap9.c
	arch/arm/mach-at91/at91sam9g45.c
2012-02-07 15:05:20 -08:00
Russell King 9199340bf0 ARM: amba: realview: get rid of private platform amba_device initializer
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-26 19:59:18 +00:00
Russell King 0dada61a29 ARM: amba: integrator/realview/versatile/vexpress: get rid of NO_IRQ initializers
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-25 11:04:01 +00:00
Marc Zyngier 34ae6c96a6 ARM: 7298/1: realview: fix mapping of MPCore private memory region
Since commit 0536bdf33f (ARM: move iotable mappings within
the vmalloc region), the RealView PB11MP cannot boot anymore.

This is caused by the way the mappings are described on this
platform (define replaced by hex values for clarity):

{	/* GIC CPU interface mapping */
        .virtual        = IO_ADDRESS(0x1F000100),
        .pfn            = __phys_to_pfn(0x1F000100),
        .length         = SZ_4K,
        .type           = MT_DEVICE,
}, {	/* GIC distributor mapping */
        .virtual        = IO_ADDRESS(0x1F001000),
        .pfn            = __phys_to_pfn(0x1F001000),
        .length         = SZ_4K,
        .type           = MT_DEVICE,
}

The first mapping ends up reserving two pages, and clashes with
the second one, which triggers a BUG_ON in vm_area_add_early().

In order to solve this problem, treat the MPCore private memory
region (containing the SCU, the GIC and the TWD) as a single region,
as described in the TRM:
http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ddi0360f/CACGDJJC.html

The EB11MP is converted the same way, even if it manages to avoid
the problem.

Tested on both PB11MP and EB11MP.

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-25 09:24:36 +00:00
Linus Torvalds f5e4e20faa 2nd round of GPIO changes for v3.3 merge window
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJPERUPAAoJEEFnBt12D9kBIgkQAI5kJ6HhPMeuSWVN8RiuLxvY
 VsE77HffpdwCSVWjNqYLN132zkEkH7Bt/yxPp3om4ursh6qPL2tdxJZGJiBbt4iL
 pRtPCYvaH/JGeXlXA7C0k7ltJpiEK1aT/0GulrkiyvBUfqTQNPBZNUkA8VnTN/Xo
 Rsmg4Px3ECNIftS2xKsvdb70lZd9OHd5XCp6dv/7wAyPOxm8npBf7e/QwlBaUAzZ
 6MxY4+5WFih+6+MioXdkIbIsmN2QIRyZ5RbJQpd6EHYpuzB875l2Cau06hzNL4vZ
 8g/l4sRZ2fXdYqge6ZHEeaK23wkOigfi9xWQEjrhWDZVdOp7kaML8ZIIGXhnNMHR
 /5Hb6WcL0paGAiZHreFhdaof/eYuguVjXZAxAM6FeAiU3Zr88WDeWvbzakmPQVgg
 DNT3rnydaTaJRPV5gDjyv6mW/MuHjicCjJpgSYTDITy4FLKZGmZ9EgXtJV94RkKq
 8Wk94ybX5nNM1N9uGH3Iau7R1VEie+xrfSPFtUTkqUMlimNAjTohNN9g4l/S8sDI
 /fWSEbfoI5vXIpbtfNLp9cp3OuDm8HqjLlWToHbsygPxQv+ZR8vK4J8ztW9OnDYt
 ybx53all5hhu+qdcu+LfdcdG4xEsjXgxvRaMFgRXQkHCQaqGgZTyQaV7Gw/+3YMs
 TNBFdyv1yxysAx8qKS+O
 =yG1E
 -----END PGP SIGNATURE-----

Merge tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux-2.6

2nd round of GPIO changes for v3.3 merge window

* tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux-2.6:
  GPIO: sa1100: implement proper gpiolib gpio_to_irq conversion
  gpio: pl061: remove combined interrupt
  gpio: pl061: convert to use generic irq chip
  GPIO: add bindings for managed devices
  ARM: realview: convert pl061 no irq to 0 instead of -1
  gpio: pl061: convert to use 0 for no irq
  gpio: pl061: use chained_irq_* functions in irq handler
  GPIO/pl061: Add suspend resume capability
  drivers/gpio/gpio-tegra.c: use devm_request_and_ioremap
2012-01-14 13:25:23 -08:00
Linus Torvalds 7affca3537 Merge branch 'driver-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
* 'driver-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (73 commits)
  arm: fix up some samsung merge sysdev conversion problems
  firmware: Fix an oops on reading fw_priv->fw in sysfs loading file
  Drivers:hv: Fix a bug in vmbus_driver_unregister()
  driver core: remove __must_check from device_create_file
  debugfs: add missing #ifdef HAS_IOMEM
  arm: time.h: remove device.h #include
  driver-core: remove sysdev.h usage.
  clockevents: remove sysdev.h
  arm: convert sysdev_class to a regular subsystem
  arm: leds: convert sysdev_class to a regular subsystem
  kobject: remove kset_find_obj_hinted()
  m86k: gpio - convert sysdev_class to a regular subsystem
  mips: txx9_sram - convert sysdev_class to a regular subsystem
  mips: 7segled - convert sysdev_class to a regular subsystem
  sh: dma - convert sysdev_class to a regular subsystem
  sh: intc - convert sysdev_class to a regular subsystem
  power: suspend - convert sysdev_class to a regular subsystem
  power: qe_ic - convert sysdev_class to a regular subsystem
  power: cmm - convert sysdev_class to a regular subsystem
  s390: time - convert sysdev_class to a regular subsystem
  ...

Fix up conflicts with 'struct sysdev' removal from various platform
drivers that got changed:
 - arch/arm/mach-exynos/cpu.c
 - arch/arm/mach-exynos/irq-eint.c
 - arch/arm/mach-s3c64xx/common.c
 - arch/arm/mach-s3c64xx/cpu.c
 - arch/arm/mach-s5p64x0/cpu.c
 - arch/arm/mach-s5pv210/common.c
 - arch/arm/plat-samsung/include/plat/cpu.h
 - arch/powerpc/kernel/sysfs.c
and fix up cpu_is_hotpluggable() as per Greg in include/linux/cpu.h
2012-01-07 12:03:30 -08:00
Russell King 7b9dd47136 Merge branch 'restart' into for-linus
Conflicts:
	arch/arm/mach-exynos/cpu.c

The changes to arch/arm/mach-exynos/cpu.c were moved to
mach-exynos/common.c.
2012-01-05 13:25:27 +00:00
Russell King 47cacdd4ed ARM: restart: realview: use new restart hook
Hook these platforms restart code into the new restart hook rather
than using arch_reset().

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-05 12:57:18 +00:00
Rob Herring 2b84112718 ARM: realview: convert pl061 no irq to 0 instead of -1
Drivers should use 0 for no irq, so convert realview platforms pl061
platform_data over to use 0.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Cc: Russell King <linux@arm.linux.org.uk>
2012-01-04 10:10:20 -06:00
Kay Sievers edbaa603eb driver-core: remove sysdev.h usage.
The sysdev.h file should not be needed by any in-kernel code, so remove
the .h file from these random files that seem to still want to include
it.

The sysdev code will be going away soon, so this include needs to be
removed no matter what.

Cc: Jiandong Zheng <jdzheng@broadcom.com>
Cc: Scott Branden <sbranden@broadcom.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Kukjin Kim <kgene.kim@samsung.com>
Cc: David Brown <davidb@codeaurora.org>
Cc: Daniel Walker <dwalker@fifo99.com>
Cc: Bryan Huntsman <bryanh@codeaurora.org>
Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Wan ZongShun <mcuos.com@gmail.com>
Cc: Haavard Skinnemoen <hskinnemoen@gmail.com>
Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: "Venkatesh Pallipadi
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
2011-12-21 16:26:03 -08:00
Russell King 73829af71f Merge branch 'vmalloc' of git://git.linaro.org/people/nico/linux into devel-stable 2011-12-05 23:27:59 +00:00
Rob Herring 3e28c80044 ARM: realview-eb11mp: fix map_desc alignment
REALVIEW_EB11MP_GIC_CPU_BASE is not 4KB aligned which causes an
overlapping mapping. Use REALVIEW_EB11MP_SCU_BASE instead which is
aligned.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
2011-11-18 13:51:19 -05:00
Marc Zyngier 1b99d9ccb5 ARM: RealView: convert to CONFIG_MULTI_IRQ_HANDLER
Convert the RealView platforms to be using the gic_handle_irq
function as their primary interrupt handler.

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2011-11-15 18:13:59 +00:00
Nicolas Pitre 9ddea57eb7 ARM: mach-realview: convert boot_params to atag_offset
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
2011-08-21 17:15:08 -04:00
Nicolas Pitre 00e9125e06 ARM: mach-realview: move from ARM_DMA_ZONE_SIZE to mdesc->dma_zone_size
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
2011-07-18 15:30:02 -04:00
Pawel Moll 0efc48ecaf ARM: 6807/1: realview: Fix secondary GIC initialisation for EB with MPCore tile
The second GIC, present when EB board is used with a MPCore tile,
was initialised starting with irq number 64, which made interrupts
64-95 in the primary GIC unusable.

Signed-off-by: Pawel Moll <pawel.moll@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-03-26 10:06:08 +00:00
Russell King 196f020fbb Merge branches 'fixes', 'pgt-next' and 'versatile' into devel 2011-03-20 09:32:12 +00:00
Russell King f093728c0d ARM: realview: remove old AMBA device DMA definitions
The AMBA DMA macro definitions are not used, and the AMBA Primecell DMA
support makes no use of them either, so they can be removed.

Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-19 11:11:24 +00:00
Russell King 631e55f966 ARM: realview: use new init_early for clock tree and sched_clock init
Initialize the clock tree and our sched_clock() early.

Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-19 11:11:07 +00:00
Russell King b75c178afa ARM: P2V: avoid initializers and assembly using PHYS_OFFSET
As PHYS_OFFSET will be becoming a variable, we can't have it used in
initializers nor assembly code.  Replace those in generic code with
a run-time initialization.  Replace those in platform code using the
individual platform specific PLAT_PHYS_OFFSET.

Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Acked-by: David Brown <davidb@codeaurora.org>
Acked-by: Eric Miao <eric.y.miao@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-17 23:27:30 +00:00
Russell King ff2e27ae0b ARM: GIC: consolidate gic_cpu_base_addr to common GIC code
Every architecture using the GIC has a gic_cpu_base_addr pointer for
GIC 0 for their entry assembly code to use to decode the cause of the
current interrupt.  Move this into the common GIC code.

Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-14 19:21:42 +00:00
Russell King b580b899dd ARM: GIC: provide a single initialization function for boot CPU
Provide gic_init() which initializes the GIC distributor and current
CPU's GIC interface for the boot (or single) CPU.

Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-14 19:21:30 +00:00
Nicolas Pitre 6451d7783b arm: remove machine_desc.io_pg_offst and .phys_io
Since we're now using addruart to establish the debug mapping, we can
remove the io_pg_offst and phys_io members of struct machine_desc.

The various declarations were removed using the following script:

  grep -rl MACHINE_START arch/arm | xargs \
  sed -i '/MACHINE_START/,/MACHINE_END/ { /\.\(phys_io\|io_pg_offst\)/d }'

[ Initial patch was from Jeremy Kerr, example script from Russell King ]

Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Acked-by: Eric Miao <eric.miao at canonical.com>
2010-10-20 00:27:46 -04:00
Linus Walleij d161edfbf2 ARM: 6215/2: add character LCD platform data for RealView and Versatile
This adds some platform data for the character LCD found in the
RealView and Versatile reference designs from ARM.

Signed-off-by: Linus Walleij <triad@df.lth.se>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-18 20:44:16 +01:00
Linus Walleij d6ada8609b ARM: 6227/1: PL022 SSP platform data for the RealViews
This adds platform data for the PL022 to the ARM RealView reference
designs, adds the necessary clock definition and fixes a badly
defined IRQ line on the PB1176.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-15 11:17:10 +01:00
Catalin Marinas cc9897df72 ARM: 6193/1: RealView: Align the machine_desc.phys_io to 1MB section
When not aligned, random bits could be written in the initial page table
by the __create_page_tables() function.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-01 10:13:46 +01:00
Will Deacon f417cbad73 ARM: 6057/1: Realview: register PMU IRQs during board initialisation
This patch updates the initialisation routines for the Realview boards
and the Versatile Express board [ca9x4 tile] so that they register their
PMU IRQs with the PMU framework in the Kernel.

Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-02 09:35:40 +01:00
Russell King f4b8b319bf ARM: Realview/Versatile/Integrator: separate out common clock code
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-02 09:35:33 +01:00
Russell King c5a0adb510 ARM: ICST: kill duplicate icst code
The only difference between ICST307 and ICST525 are the two arrays
for calculating the S parameter; the code is now identical.  Merge
the two files and kill the duplicated code.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-02 09:35:33 +01:00
Colin Tuckley 4c9f8be7da ARM: 5873/1: ARM: Fix the reset logic for ARM RealView boards
Extend the patch from Philby John to the other "RealView" boards.
Rename the constants and offsets to reflect their actual functions.

Cc: Philby John <pjohn@in.mvista.com>
Signed-off-by: Colin Tuckley <colin.tuckley@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-01-11 15:39:21 +00:00
Catalin Marinas 5b39d1548d RealView: Add default memory configuration
This patch adds a realview_fixup() function called during booting to set
up the memory banks. This way there is no need to pass a "mem=" argument
on the kernel command line.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2009-11-05 10:10:36 +00:00
Linus Walleij 6ef297f86b ARM: 5720/1: Move MMCI header to amba include dir
This moves the mmci platform data definition struct away from
arch/arm/include/asm/mach/mmc.h into the more proper place among
the other primecells in include/linux/amba/mmci.h and at the same
time renames it to "mmci.h", and also the struct in this file
confusingly named mmc_platform_data has been renamed
mmci_platform_data for clarity.

Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-09-22 20:49:04 +01:00