Commit Graph

947 Commits

Author SHA1 Message Date
Linus Torvalds 2d2474a194 Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux
Pull thermal managament updates from Zhang Rui:

 - Enhance thermal "userspace" governor to export the reason when a
   thermal event is triggered and delivered to user space. From Srinivas
   Pandruvada

 - Introduce a single TSENS thermal driver for the different versions of
   the TSENS IP that exist, on different qcom msm/apq SoCs'. Support for
   msm8916, msm8960, msm8974 and msm8996 families is also added. From
   Rajendra Nayak

 - Introduce hardware-tracked trip points support to the device tree
   thermal sensor framework. The framework supports an arbitrary number
   of trip points. Whenever the current temperature is changed, the trip
   points immediately below and above the current temperature are found,
   driver callback is invoked to program the hardware to get notified
   when either of the two trip points are triggered. Hardware-tracked
   trip points support for rockchip thermal driver is also added at the
   same time. From Sascha Hauer, Caesar Wang

 - Introduce a new thermal driver, which enables TMU (Thermal Monitor
   Unit) on QorIQ platform. From Jia Hongtao

 - Introduce a new thermal driver for Maxim MAX77620. From Laxman
   Dewangan

 - Introduce a new thermal driver for Intel platforms using WhiskeyCove
   PMIC. From Bin Gao

 - Add mt2701 chip support to MTK thermal driver. From Dawei Chien

 - Enhance Tegra thermal driver to enable soctherm node and set
   "critical", "hot" trips, for Tegra124, Tegra132, Tegra210. From Wei
   Ni

 - Add resume support for tango thermal driver. From Marc Gonzalez

 - several small fixes and improvements for rockchip, qcom, imx, rcar,
   mtk thermal drivers and thermal core code. From Caesar Wang, Keerthy,
   Rocky Hao, Wei Yongjun, Peter Robinson, Bui Duc Phuc, Axel Lin, Hugh
   Kang

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (48 commits)
  thermal: int3403: Process trip change notification
  thermal: int340x: New Interface to read trip and notify
  thermal: user_space gov: Add additional information in uevent
  thermal: Enhance thermal_zone_device_update for events
  arm64: tegra: set hot trips for Tegra210
  arm64: tegra: set critical trips for Tegra210
  arm64: tegra: add soctherm node for Tegra210
  arm64: tegra: set hot trips for Tegra132
  arm64: tegra: set critical trips for Tegra132
  arm64: tegra: use tegra132-soctherm for Tegra132
  arm: tegra: set hot trips for Tegra124
  arm: tegra: set critical trips for Tegra124
  thermal: tegra: add hw-throttle for Tegra132
  thermal: tegra: add hw-throttle function
  of: Add bindings of hw throttle for Tegra soctherm
  thermal: mtk_thermal: Check return value of devm_thermal_zone_of_sensor_register
  thermal: Add Mediatek thermal driver for mt2701.
  dt-bindings: thermal: Add binding document for Mediatek thermal controller
  thermal: max77620: Add thermal driver for reporting junction temp
  thermal: max77620: Add DT binding doc for thermal driver
  ...
2016-10-12 11:05:23 -07:00
Linus Torvalds 6b25e21fa6 Merge tag 'drm-for-v4.9' of git://people.freedesktop.org/~airlied/linux
Pull drm updates from Dave Airlie:
 "Core:
   - Fence destaging work
   - DRIVER_LEGACY to split off legacy drm drivers
   - drm_mm refactoring
   - Splitting drm_crtc.c into chunks and documenting better
   - Display info fixes
   - rbtree support for prime buffer lookup
   - Simple VGA DAC driver

  Panel:
   - Add Nexus 7 panel
   - More simple panels

  i915:
   - Refactoring GEM naming
   - Refactored vma/active tracking
   - Lockless request lookups
   - Better stolen memory support
   - FBC fixes
   - SKL watermark fixes
   - VGPU improvements
   - dma-buf fencing support
   - Better DP dongle support

  amdgpu:
   - Powerplay for Iceland asics
   - Improved GPU reset support
   - UVD/VEC powergating support for CZ/ST
   - Preinitialised VRAM buffer support
   - Virtual display support
   - Initial SI support
   - GTT rework
   - PCI shutdown callback support
   - HPD IRQ storm fixes

  amdkfd:
   - bugfixes

  tilcdc:
   - Atomic modesetting support

  mediatek:
   - AAL + GAMMA engine support
   - Hook up gamma LUT
   - Temporal dithering support

  imx:
   - Pixel clock from devicetree
   - drm bridge support for LVDS bridges
   - active plane reconfiguration
   - VDIC deinterlacer support
   - Frame synchronisation unit support
   - Color space conversion support

  analogix:
   - PSR support
   - Better panel on/off support

  rockchip:
   - rk3399 vop/crtc support
   - PSR support

  vc4:
   - Interlaced vblank timing
   - 3D rendering CPU overhead reduction
   - HDMI output fixes

  tda998x:
   - HDMI audio ASoC support

  sunxi:
   - Allwinner A33 support
   - better TCON support

  msm:
   - DT binding cleanups
   - Explicit fence-fd support

  sti:
   - remove sti415/416 support

  etnaviv:
   - MMUv2 refactoring
   - GC3000 support

  exynos:
   - Refactoring HDMI DCC/PHY
   - G2D pm regression fix
   - Page fault issues with wait for vblank

  There is no nouveau work in this tree, as Ben didn't get a pull
  request in, and he was fighting moving to atomic and adding mst
  support, so maybe best it waits for a cycle"

* tag 'drm-for-v4.9' of git://people.freedesktop.org/~airlied/linux: (1412 commits)
  drm/crtc: constify drm_crtc_index parameter
  drm/i915: Fix conflict resolution from backmerge of v4.8-rc8 to drm-next
  drm/i915/guc: Unwind GuC workqueue reservation if request construction fails
  drm/i915: Reset the breadcrumbs IRQ more carefully
  drm/i915: Force relocations via cpu if we run out of idle aperture
  drm/i915: Distinguish last emitted request from last submitted request
  drm/i915: Allow DP to work w/o EDID
  drm/i915: Move long hpd handling into the hotplug work
  drm/i915/execlists: Reinitialise context image after GPU hang
  drm/i915: Use correct index for backtracking HUNG semaphores
  drm/i915: Unalias obj->phys_handle and obj->userptr
  drm/i915: Just clear the mmiodebug before a register access
  drm/i915/gen9: only add the planes actually affected by ddb changes
  drm/i915: Allow PCH DPLL sharing regardless of DPLL_SDVO_HIGH_SPEED
  drm/i915/bxt: Fix HDMI DPLL configuration
  drm/i915/gen9: fix the watermark res_blocks value
  drm/i915/gen9: fix plane_blocks_per_line on watermarks calculations
  drm/i915/gen9: minimum scanlines for Y tile is not always 4
  drm/i915/gen9: fix the WaWmMemoryReadLatency implementation
  drm/i915/kbl: KBL also needs to run the SAGV code
  ...
2016-10-11 18:12:22 -07:00
Linus Torvalds 56e520c7a0 IOMMU Updates for Linux v4.9
Including:
 
 	* Support for interrupt virtualization in the AMD IOMMU driver.
 	  These patches were shared with the KVM tree and are already
 	  merged through that tree.
 
 	* Generic DT-binding support for the ARM-SMMU driver. With this
 	  the driver now makes use of the generic DMA-API code. This
 	  also required some changes outside of the IOMMU code, but
 	  these are acked by the respective maintainers.
 
 	* More cleanups and fixes all over the place.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJX/PmUAAoJECvwRC2XARrjyloP/1hymxXC2yXZ4EIBTHSO5X+c
 jSJaGTIbQAdQDpllscSNJ0Au43L3vGtJcHo4JqwEERNlwLsU82LH7QJhq+q1La/b
 5cPaY5gI3E++qxQt8umuZJAIUQthFYrfGoS5lJc5t5r/d8iVsLWbW4VkR19/1o7A
 4/Uz7ETmi9VVy8Hkvumx+PQ0VHJet381KB7ud9LU5Spim0En2AAGwZXLMkmxXd2W
 uDQ+O1rlDVc2/ka3+GmfZEml5EASWRqS/MTNoU/ZbQGYWKCWygXbuiqt6gLudWjx
 dCR1Knh68b0gN6k/QAj8XY/1gkfmZ3YkfS0AHIMLYTFRT51BuxOrkXrBdkYnWEBv
 UirmaiV87SlR1j83yb3ZmjpBPvd2sGWYFDqY1P0riLutjGUS6zycWWs13olvbfbz
 SFrH7PT7JPQGYprI1oVn4ihszjN1NZ4+Gj7QBhyFW6FtvqTzmaFVsMOlDIeg1FwR
 k8cOzov4NG33Bp4IpsHK8e0/qV6K3oJOiOQgCyQp9kPKK+UWv9v9+HaEA7npJuRV
 c+lTE6j3G4LjEoVybkqm8TiPKxTMVNjUjgA3kwB2yNkCQT7hTCNYIAFrtfCYjYdo
 B1dnFE7feVqtoimnu2qvkVs59hWlF7Hc3RRHoBxMmO8DLwl9n2OcmoQIeCTsviss
 i9aNwC9bzBs+Hd3X/psB
 =1hFE
 -----END PGP SIGNATURE-----

Merge tag 'iommu-updates-v4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu

Pull IOMMU updates from Joerg Roedel:

 - support for interrupt virtualization in the AMD IOMMU driver. These
   patches were shared with the KVM tree and are already merged through
   that tree.

 - generic DT-binding support for the ARM-SMMU driver. With this the
   driver now makes use of the generic DMA-API code. This also required
   some changes outside of the IOMMU code, but these are acked by the
   respective maintainers.

 - more cleanups and fixes all over the place.

* tag 'iommu-updates-v4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (40 commits)
  iommu/amd: No need to wait iommu completion if no dte irq entry change
  iommu/amd: Free domain id when free a domain of struct dma_ops_domain
  iommu/amd: Use standard bitmap operation to set bitmap
  iommu/amd: Clean up the cmpxchg64 invocation
  iommu/io-pgtable-arm: Check for v7s-incapable systems
  iommu/dma: Avoid PCI host bridge windows
  iommu/dma: Add support for mapping MSIs
  iommu/arm-smmu: Set domain geometry
  iommu/arm-smmu: Wire up generic configuration support
  Docs: dt: document ARM SMMU generic binding usage
  iommu/arm-smmu: Convert to iommu_fwspec
  iommu/arm-smmu: Intelligent SMR allocation
  iommu/arm-smmu: Add a stream map entry iterator
  iommu/arm-smmu: Streamline SMMU data lookups
  iommu/arm-smmu: Refactor mmu-masters handling
  iommu/arm-smmu: Keep track of S2CR state
  iommu/arm-smmu: Consolidate stream map entry state
  iommu/arm-smmu: Handle stream IDs more dynamically
  iommu/arm-smmu: Set PRIVCFG in stage 1 STEs
  iommu/arm-smmu: Support non-PCI devices with SMMUv3
  ...
2016-10-11 12:52:41 -07:00
Linus Torvalds c913fc4146 ARM: SoC: late DT updates for v4.9
These updates have been kept in a separate branch mostly because
 they rely on updates to the respective clk drivers to keep the
 shared header files in sync.
 
 - The Renesas r8a7796 (R-Car M3-W) platform gets added, this is an
   automotive SoC similar to the ⅹ8a7795 chip we already support, but
   the dts changes rely on a clock driver change that has been
   merged for v4.9 through the clk tree.
 
 - The Amlogic meson-gxbb (S905) platform gains support for a few
   drivers merged through our tree, in particular the network and
   usb driver changes are required and included here, and also
   the clk tree changes.
 
 - The Allwinner platforms have seen a large-scale change to their
   clk drivers and the dts file updates must come after that.
   This includes the newly added Nextthing GR8 platform, which is
   derived from sun5i/A13.
 
 - Some integrator (arm32) changes rely on clk driver changes.
 
 - A single patch for lpc32xx has no such dependency but wasn't
   added until just before the merge window
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIVAwUAV/gzeGCrR//JCVInAQKVhw/5AS5R2S7m7VTlWMvGjvH9ITudYhiAGJP1
 z5nP5SwJsfmSjfvw0kSxGUmsNS3rHutsPMz65EesKqFuC3LPZiqMUqrzxt9iqqJx
 I+XdAxDTnOE1RBZFtB9dL+qLzHQ87pMo6R9dfs32sxb3QuCQBYhcFyLmQDuZuHH0
 yeDi3ARFvgxx/qoRUA7cnSlY5RLNzM44y+Ik/ZcVr4ReqYBC2g5mGi5htoiNSLWR
 nwWR+5hNLAp44OZgkZfNsf6kB9brWDQh3PbnBjy6sKXSBoSVIfxTweh2DMJXbZ7l
 1Ck+S7WyLMhGJp448TcuBykr/l9i3uqNh061XavjwP8CAjAdZ787XlnNSztc2pyh
 dvbI/E76pLGb5ZoFdqlY2Syl63ZFN4K8mjZMSPYfYKf85EDIxe4MYwpbo7/pwzh3
 8OlBwH6r4aUMw+QgE1nx8nsjaCoGDMFdgJeJJaWdriZ6Nst2n5gREk/mzbrAWkNG
 ujChn/6hES9LuE21aCp1ipB7qnnyeRinfqz2acEFxMQxuPdjwKrdJqNsBaTWsapE
 Z+b/BFP+LTdPfHCmMSVwfMrNbwsoY7+L4EXXL36lUgOwcDp0vCXA+PiiahYASewA
 1LDQ3CURCEapdBhVU+06Kb4y5eWU7M7EqpOwpHgRJ92dVxgNxuCfcurvxzqPP1UP
 3O4R7bfUTTg=
 =OmAu
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC late DT updates from Arnd Bergmann:
 "These updates have been kept in a separate branch mostly because they
  rely on updates to the respective clk drivers to keep the shared
  header files in sync.

   - The Renesas r8a7796 (R-Car M3-W) platform gets added, this is an
     automotive SoC similar to the ⅹ8a7795 chip we already support, but
     the dts changes rely on a clock driver change that has been merged
     for v4.9 through the clk tree.

   - The Amlogic meson-gxbb (S905) platform gains support for a few
     drivers merged through our tree, in particular the network and usb
     driver changes are required and included here, and also the clk
     tree changes.

   - The Allwinner platforms have seen a large-scale change to their clk
     drivers and the dts file updates must come after that. This
     includes the newly added Nextthing GR8 platform, which is derived
     from sun5i/A13.

   - Some integrator (arm32) changes rely on clk driver changes.

   - A single patch for lpc32xx has no such dependency but wasn't added
     until just before the merge window"

* tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (99 commits)
  ARM: dts: lpc32xx: add device node for IRAM on-chip memory
  ARM: dts: sun8i: Add accelerometer to polaroid-mid2407pxe03
  ARM: dts: sun8i: enable UART1 for iNet D978 Rev2 board
  ARM: dts: sun8i: add pinmux for UART1 at PG
  dts: sun8i-h3: add I2C0-2 peripherals to H3 SOC
  dts: sun8i-h3: add pinmux definitions for I2C0-2
  dts: sun8i-h3: associate exposed UARTs on Orange Pi Boards
  dts: sun8i-h3: split off RTS/CTS for UART1 in seperate pinmux
  dts: sun8i-h3: add pinmux definitions for UART2-3
  ARM: dts: sun9i: a80-optimus: Disable EHCI1
  ARM: dts: sun9i: cubieboard4: Add AXP806 PMIC device node and regulators
  ARM: dts: sun9i: a80-optimus: Add AXP806 PMIC device node and regulators
  ARM: dts: sun9i: cubieboard4: Declare AXP809 SW regulator as unused
  ARM: dts: sun9i: a80-optimus: Declare AXP809 SW regulator as unused
  ARM: dts: sun8i: Add touchscreen node for sun8i-a33-ga10h
  ARM: dts: sun8i: Add touchscreen node for sun8i-a23-polaroid-mid2809pxe04
  ARM: dts: sun8i: Add touchscreen node for sun8i-a23-polaroid-mid2407pxe03
  ARM: dts: sun8i: Add touchscreen node for sun8i-a23-inet86dz
  ARM: dts: sun8i: Add touchscreen node for sun8i-a23-gt90h
  ARM64: dts: meson-gxbb-vega-s95: Enable USB Nodes
  ...
2016-10-07 21:34:49 -07:00
Linus Torvalds 00e729c933 ARM: DT updates for v4.9
These are as usual a very large number of mostly boring updates to
 enable devices in existing machines, or to fix minor bugs.  Notably,
 an ongoing treewide effort to fix warnings caused by an update to the
 device tree compiler. These are enabled with "make W=1" at the moment
 but can hopefully become the default once all issues have been addressed.
 
 No new SoC platform is added this time around (Armada 395 and Orion
 mv88f5181 are slight variations of existing ones), but a significant
 number of new dts files are added, which I list by platform:
 
 - Allwinner: Empire Electronix M712 and iNet d978 Rev2 tablets;
 	Orange Pi PC Plus, Orange Pi 2, Orange Pi Plus 2E,
 	Orange Pi Lite, Olimex A33-Olinuxino, and Nano Pi Neo
 	single-board computers
 
 - ARM Realview: all supported machines (ported from board files)
 
 - Broadcom: BCM958525er, BCM958522er, BCM988312hr, BCM958623hr and
 	BCM958622hr reference boards for Northstar platform;
 	Raspberry Pi Zero single-board computer
 
 - Marvell EBU: Netgear WNR854T router (ported from board file);
 	Armada 395 SoC platform and GP board
 	Armada 390 DB development board
 
 - NXP i.MX: imx7s Warp7 reference board;
 	Gateworks Ventana GW553x single-board computer,
 	Technologic Systems TS-4900 and
 	Engicam IMX6UL GEA M6UL computer-on-module,
 	Inverse Path USB armory board
 
 - Qualcomm: LG Nexus 5 Phone
 
 - Renesas: r8a7792/wheat and r7s72100/rskrza1 development boards
 
 - Rockchip: Rockchip RK3288 Fennec reference board;
 	Firefly RK3288 Reload platform
 
 - ST Microelectronics STi: B2260 (96boards) single-board computer
 
 - TI Davinci: OMAP-L138 LCDK Development kit
 
 - TI OMAP: beagleboard-x15 rev B1 single-board computer
 
 Conflicts: vendor-prefixes.txt has conflicting additions, keep all of
 them in alphabetical order.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIVAwUAV/g11mCrR//JCVInAQIWbw/9FOrBghI2bFqZkDwFE8E3QCpc9bIiETMx
 FMdHV6FAo0D6Yp4EqlWjFI0u0Kn9l4FKz0SYWAigpfT6gfeI1THC2Kl31mslvb5U
 v3QreXI4rKjZS/B1lYECee0os+fNvJcWKj3uFjb4VT1k7T6+MytjHGAQSzwxM66Q
 0Lp5HjdFGDrOXoIUx2eEZkZlVXyQ2EFocMoAsj+s/MHnA8fn1tWW08633kjTsC6y
 9Xj71joghlDKZjA56htaEQ+/6dYdxAHVlvkN7aL9di+2Sc2/ma6my70Zvs4zwtOv
 uJDhcJhjwvf3QtDuOoGhTnFtQYQWaONaGUFyEwYyy2kIwiJy0afep4JCq2o+/CZM
 VMvGXepJpVujE9mg+LwHPgaMYgBhswsJzwQ2ZESrMQcUZ624E18dG2/ei5zat4UN
 5/NvzxEoDGmfQFQUpuoZuPqhwLRauXr7I+u4aliIdtSBGeaA2T1yFT4pVgNUOxBQ
 0bMtE2QSUKyaF+xAHLTsV7yheDU0S+C7zVkLPwePK0V7vUFuBsdQiXEqXh/6MSq0
 iYVPmKwNTIHK3qMiGtm8XDugjR8Pf0tCXRqIWJMlXs75rCAsKfFW4j4XYnlO4wMy
 dP2fdoe0xA+zthR0hRHD5i8WCmISeUgtPAdFyTid1jZkMk1AzM0AqBUdAqTInvQ3
 O4JSYcjBWoo=
 =/gg/
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM DT updates from Arnd Bergmann:
 "These are as usual a very large number of mostly boring updates to
  enable devices in existing machines, or to fix minor bugs. Notably, an
  ongoing treewide effort to fix warnings caused by an update to the
  device tree compiler. These are enabled with "make W=1" at the moment
  but can hopefully become the default once all issues have been
  addressed.

  No new SoC platform is added this time around (Armada 395 and Orion
  mv88f5181 are slight variations of existing ones), but a significant
  number of new dts files are added, which I list by platform:

   - Allwinner: Empire Electronix M712 and iNet d978 Rev2 tablets,
     Orange Pi PC Plus, Orange Pi 2, Orange Pi Plus 2E, Orange Pi Lite,
     Olimex A33-Olinuxino, and Nano Pi Neo single-board computers

   - ARM Realview: all supported machines (ported from board files)

   - Broadcom: BCM958525er, BCM958522er, BCM988312hr, BCM958623hr and
     BCM958622hr reference boards for Northstar platform, Raspberry Pi
     Zero single-board computer

   - Marvell EBU: Netgear WNR854T router (ported from board file),
     Armada 395 SoC platform and GP board Armada 390 DB development
     board

   - NXP i.MX: imx7s Warp7 reference board, Gateworks Ventana GW553x
     single-board computer, Technologic Systems TS-4900 and Engicam
     IMX6UL GEA M6UL computer-on-module, Inverse Path USB armory board

   - Qualcomm: LG Nexus 5 Phone

   - Renesas: r8a7792/wheat and r7s72100/rskrza1 development boards

   - Rockchip: Rockchip RK3288 Fennec reference board, Firefly RK3288
     Reload platform

   - ST Microelectronics STi: B2260 (96boards) single-board computer

   - TI Davinci: OMAP-L138 LCDK Development kit

   - TI OMAP: beagleboard-x15 rev B1 single-board computer"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (390 commits)
  ARM: dts: sony-nsz-gs7: add missing unit name to /memory node
  ARM: dts: chromecast: add missing unit name to /memory node
  ARM: dts: berlin2q-marvell-dmp: add missing unit name to /memory node
  ARM: dts: berlin2: Add missing unit name to /soc node
  ARM: dts: berlin2cd: Add missing unit name to /soc node
  ARM: dts: berlin2q: Add missing unit name to /soc node
  ARM: dts: berlin2: Remove skeleton.dtsi inclusion
  ARM: dts: berlin2cd: Remove skeleton.dtsi inclusion
  ARM: dts: berlin2q: Remove skeleton.dtsi inclusion
  arm: dts: berlin2q: enable all wdt nodes unconditionally
  arm: dts: berlin2: enable all wdt nodes unconditionally
  ARM: dts: omap5-igep0050.dts: Use tabs for indentation
  ARM: dts: Fix igepv5 power button GPIO direction
  ARM: dts: am335x-evmsk: Add blue-and-red-wiring -property to lcdc node
  ARM: dts: am335x-evmsk: Whitespace cleanup of lcdc related nodes
  ARM: dts: am335x-evm: Add blue-and-red-wiring -property to lcdc node
  ARM: dts: s3c64xx: Use macros for pinctrl configuration
  ARM: dts: s3c2416: Use macros for pinctrl configuration
  ARM: dts: s5pv210: Use macros for pinctrl configuration
  ARM: dts: s3c64xx: Use common macros for pinctrl configuration
  ...
2016-10-07 21:29:04 -07:00
Linus Torvalds 6afd563d4b ARM: SoC driver updates for v4.9
Driver updates for ARM SoCs, including a couple of newly added drivers:
 
 - The Qualcomm external bus interface 2 (EBI2), used in some of their
   mobile phone chips for connecting flash memory, LCD displays or
   other peripherals
 
 - Secure monitor firmware for Amlogic SoCs, and an NVMEM driver for the
   EFUSE based on that firmware interface.
 
 - Perf support for the AppliedMicro X-Gene performance monitor unit
 
 - Reset driver for STMicroelectronics STM32
 
 - Reset driver for SocioNext UniPhier SoCs
 
 Aside from these, there are minor updates to SoC-specific bus,
 clocksource, firmware, pinctrl, reset, rtc and pmic drivers.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIVAwUAV/gaimCrR//JCVInAQJaOQ/6A++YfLVmdF4wxgcu/0ti28lA7SkQIGJV
 UAsfCmqMEutbeDvnloVGmTV2K2NS7mzxdxsJGbVB7Oe/zdOFN+T9sf9hAlId01QA
 oVkoagpofoxlyKoKJ/l+heuEEZMa0Ekk3XXRTGv/Ovymo7252o4tEdGu9c+gyaMJ
 KqgixcrQRzxuWDgPpHUPUez2vY1iRMvvdcb0EmfiHcIgPOEJc6MIxulsqEIrkoMz
 WYeGFIeqRJxnrur3QD8WnD+aZD6bV01wkFTkWXGWg4H87QfEESgVBu5A7TL+5sL8
 1SlX/b7S5/ZJbrOiOS2IUyvbK7NiA/Q+NunHW2rMVnUWuEvJ9HAQB1kVSQH5LIYO
 6OBokjcijm6m/j6O6fdDfvNd6PLsIEUqfWVws7O+uofMMqKPxqak4VBTRdFM+aeF
 ZtK7mEbzteCX0bnC+XblZrseAlkIehYnP80CLDbtDTerTWP4gsjxGVt3U6MO0NzB
 K0ACWZOclzrcFscNKrmP6uPCpfZriiPV/XMCEHcylA/X2iYsVmpqKzdLuNs5aeUr
 uPzQbNWu9ygg/bDRXMYY2E3Kzjsc0eIOKEOPyhLaZdSo4e1FQxud6L2V2Vj0RLB/
 iMA7/CyQZqn6Yzgs0VMZm/bnh+hIdHioGFl5K5j6Fcw9VZRkNmnEQJzX4VU5efGO
 g1+5av0vFXg=
 =GvTq
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver updates from Arnd Bergmann:
 "Driver updates for ARM SoCs, including a couple of newly added
  drivers:

   - The Qualcomm external bus interface 2 (EBI2), used in some of their
     mobile phone chips for connecting flash memory, LCD displays or
     other peripherals

   - Secure monitor firmware for Amlogic SoCs, and an NVMEM driver for
     the EFUSE based on that firmware interface.

   - Perf support for the AppliedMicro X-Gene performance monitor unit

   - Reset driver for STMicroelectronics STM32

   - Reset driver for SocioNext UniPhier SoCs

  Aside from these, there are minor updates to SoC-specific bus,
  clocksource, firmware, pinctrl, reset, rtc and pmic drivers"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (50 commits)
  bus: qcom-ebi2: depend on HAS_IOMEM
  pinctrl: mvebu: orion5x: Generalise mv88f5181l support for 88f5181
  clk: mvebu: Add clk support for the orion5x SoC mv88f5181
  dt-bindings: EXYNOS: Add Exynos5433 PMU compatible
  clocksource: exynos_mct: Add the support for ARM64
  perf: xgene: Add APM X-Gene SoC Performance Monitoring Unit driver
  Documentation: Add documentation for APM X-Gene SoC PMU DTS binding
  MAINTAINERS: Add entry for APM X-Gene SoC PMU driver
  bus: qcom: add EBI2 driver
  bus: qcom: add EBI2 device tree bindings
  rtc: rtc-pm8xxx: Add support for pm8018 rtc
  nvmem: amlogic: Add Amlogic Meson EFUSE driver
  firmware: Amlogic: Add secure monitor driver
  soc: qcom: smd: Reset rx tail rather than tx
  memory: atmel-sdramc: fix a possible NULL dereference
  reset: hi6220: allow to compile test driver on other architectures
  reset: zynq: add driver Kconfig option
  reset: sunxi: add driver Kconfig option
  reset: stm32: add driver Kconfig option
  reset: socfpga: add driver Kconfig option
  ...
2016-10-07 21:23:40 -07:00
Linus Torvalds d042380886 - Core Frameworks
- Add the MFD bindings doc to MAINTAINERS
 
 - New Drivers
    - X-Powers AC100 Audio CODEC and RTC
    - TI LP873x PMIC
    - Rockchip RK808 PMIC
    - Samsung Exynos Low Power Audio
 
  - New Device Support
    - Add support for STMPE1600 variant to stmpe
    - Add support for PM8018 PMIC to pm8921-core
    - Add support for AXP806 PMIC in axp20x
    - Add support for AXP209 GPIO in axp20x
 
  - New Functionality
    - Add support for Reset to all STMPE variants
    - Add support for MKBP event support to cros_ec
    - Add support for USB to intel_soc_pmic_bxtwc
    - Add support for IRQs and Power Button to tps65217
 
  - Fix-ups
    - Clean-up defunct author emails; da9063, max14577
    - Kconfig fixups; wm8350-i2c, as3722
    - Constify; altera-a10sr, sm501
    - Supply PCI IDs; intel-lpss-pci
    - Improve clocking; qcom_rpm
    - Fix IRQ probing; ucb1x00-core
    - Ensure fault log is cleared; da9052
    - Remove NO_IRQ check; ucb1x00-core
    - Supply I2C properties; intel-lpss-acpi, intel-lpss-pci
    - Non standard declaration; tps65217, max8997-irq
    - Remove unused code; lp873x, db8500-prcmu, ab8500-debugfs,
                          cros_ec_spi
    - Make non-modular; altera-a10sr, intel_msic, smsc-ece1099,
                        sun6i-prcm, twl-core,
    - OF bindings; ac100, stmpe, qcom-pm8xxx, qcom-rpm, rk808,
                   axp20x, lp873x, exynos5433-lpass, act8945a,
                   aspeed-scu, twl6040, arizona
 
  - Bug Fixes
    - Release OF pointer; qcom_rpm
    - Avoid double shifting in suspend/resume; 88pm80x
    - Fix 'defined but not used' error; exynos-lpass
    - Fix 'sleeping whilst attomic'; atmel-hlcdc
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABCAAGBQJX9giOAAoJEFGvii+H/Hdh8aEP/iiHosBZsksZ4we8KAdoXkxi
 x5nnJvS9+4b5yaasSiN8e2xs9YMOlHu1CNZDZ3RJZ+rLusdVeg5ju5p5WED83pvi
 ltiPMhyqruM3d0rieTRHxeJFmmEf2exwKV3Y+5lo9586dFfJrmGp2AxScId4TtwP
 CcsjwYRx/WvVfWrv1xWsjd9b1RDlWglt3dcVhdKAQbvPPOy5O4ymXNMFs0DuFyZ+
 2A16sw7hdYenXSvAHlZzS5IqXP9JEeosu3O/mUUZKF3PO55t+KbQBGZiwXoal4gp
 1dwrdBjlrZaHcDa5Ra9x+jQ2kxIkyUT44CXKAHa7llTfZQkZIgnv/fWUhB8C5JxU
 iaqnN9rWQ2MNjt3Us/n1TSJH2kEnSNbzrQixE0n8yjIBsZePWlW2ZpWYRF7GPG2i
 2pB8oNz/NdDkKWdosR3ArnseNOKVcC+GtD+mHk0aKMPghPq+gDIRrdM0CFyWeIZE
 w/Cf+HHZPR0O1VuYZ9bHIhbgnEbz5xUADOtBAdppIBQiNEI/G9lJpG6Ft4FTQoPi
 CIbnnB/wxxMaEl85rUPYGkxQniuUI5f0tMv3k2ZtAZMKcqn6iXtiIOuXceM2vUdy
 ze1uddH4HuHLcrJT5x+J72XJL6RXzZKxOqd0b7BcXnvMVFJrWgleH1JQ2WqazAEW
 il1u28IkFusm/BW/0dps
 =Ja7p
 -----END PGP SIGNATURE-----

Merge tag 'mfd-for-linus-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

Pull MFD updates from Lee Jones:
 "Core framework:
   - Add the MFD bindings doc to MAINTAINERS

  New drivers:
   - X-Powers AC100 Audio CODEC and RTC
   - TI LP873x PMIC
   - Rockchip RK808 PMIC
   - Samsung Exynos Low Power Audio

  New device support:
   - Add support for STMPE1600 variant to stmpe
   - Add support for PM8018 PMIC to pm8921-core
   - Add support for AXP806 PMIC in axp20x
   - Add support for AXP209 GPIO in axp20x

  New functionality:
   - Add support for Reset to all STMPE variants
   - Add support for MKBP event support to cros_ec
   - Add support for USB to intel_soc_pmic_bxtwc
   - Add support for IRQs and Power Button to tps65217

  Fix-ups:
   - Clean-up defunct author emails (da9063, max14577)
   - Kconfig fixups (wm8350-i2c, as37220
   - Constify (altera-a10sr, sm501)
   - Supply PCI IDs (intel-lpss-pci)
   - Improve clocking (qcom_rpm)
   - Fix IRQ probing (ucb1x00-core)
   - Ensure fault log is cleared (da9052)
   - Remove NO_IRQ check (ucb1x00-core)
   - Supply I2C properties (intel-lpss-acpi, intel-lpss-pci)
   - Non standard declaration (tps65217, max8997-irq)
   - Remove unused code (lp873x, db8500-prcmu, ab8500-debugfs,
     cros_ec_spi)
   - Make non-modular (altera-a10sr, intel_msic, smsc-ece1099,
     sun6i-prcm, twl-core)
   - OF bindings (ac100, stmpe, qcom-pm8xxx, qcom-rpm, rk808, axp20x,
     lp873x, exynos5433-lpass, act8945a, aspeed-scu, twl6040, arizona)

  Bugfixes:
   - Release OF pointer (qcom_rpm)
   - Avoid double shifting in suspend/resume (88pm80x)
   - Fix 'defined but not used' error (exynos-lpass)
   - Fix 'sleeping whilst attomic' (atmel-hlcdc)"

* tag 'mfd-for-linus-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (69 commits)
  mfd: arizona: Handle probe deferral for reset GPIO
  mfd: arizona: Remove arizona_of_get_named_gpio helper function
  mfd: arizona: Add DT options for max_channels_clocked and PDM speaker config
  mfd: twl6040: Register child device for twl6040-pdmclk
  mfd: cros_ec_spi: Remove unused variable 'request'
  mfd: omap-usb-host: Return value is not 'const int'
  mfd: ab8500-debugfs: Remove 'weak' function suspend_test_wake_cause_interrupt_is_mine()
  mfd: ab8500-debugfs: Remove ab8500_dump_all_banks_to_mem()
  mfd: db8500-prcmu: Remove unused *prcmu_set_ddr_opp() calls
  mfd: ab8500-debugfs: Prevent initialised field from being over-written
  mfd: max8997-irq: 'inline' should be at the beginning of the declaration
  mfd: rk808: Fix RK818_IRQ_DISCHG_ILIM initializer
  mfd: tps65217: Fix nonstandard declaration
  mfd: lp873x: Remove unused mutex lock from struct lp873x
  mfd: atmel-hlcdc: Do not sleep in atomic context
  mfd: exynos-lpass: Mark PM functions as __maybe_unused
  mfd: intel-lpss: Add default I2C device properties for Apollo Lake
  mfd: twl-core: Make it explicitly non-modular
  mfd: sun6i-prcm: Make it explicitly non-modular
  mfd: smsc-ece1099: Make it explicitly non-modular
  ...
2016-10-07 08:35:35 -07:00
Linus Torvalds 687ee0ad4e Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:

 1) BBR TCP congestion control, from Neal Cardwell, Yuchung Cheng and
    co. at Google. https://lwn.net/Articles/701165/

 2) Do TCP Small Queues for retransmits, from Eric Dumazet.

 3) Support collect_md mode for all IPV4 and IPV6 tunnels, from Alexei
    Starovoitov.

 4) Allow cls_flower to classify packets in ip tunnels, from Amir Vadai.

 5) Support DSA tagging in older mv88e6xxx switches, from Andrew Lunn.

 6) Support GMAC protocol in iwlwifi mwm, from Ayala Beker.

 7) Support ndo_poll_controller in mlx5, from Calvin Owens.

 8) Move VRF processing to an output hook and allow l3mdev to be
    loopback, from David Ahern.

 9) Support SOCK_DESTROY for UDP sockets. Also from David Ahern.

10) Congestion control in RXRPC, from David Howells.

11) Support geneve RX offload in ixgbe, from Emil Tantilov.

12) When hitting pressure for new incoming TCP data SKBs, perform a
    partial rathern than a full purge of the OFO queue (which could be
    huge). From Eric Dumazet.

13) Convert XFRM state and policy lookups to RCU, from Florian Westphal.

14) Support RX network flow classification to igb, from Gangfeng Huang.

15) Hardware offloading of eBPF in nfp driver, from Jakub Kicinski.

16) New skbmod packet action, from Jamal Hadi Salim.

17) Remove some inefficiencies in snmp proc output, from Jia He.

18) Add FIB notifications to properly propagate route changes to
    hardware which is doing forwarding offloading. From Jiri Pirko.

19) New dsa driver for qca8xxx chips, from John Crispin.

20) Implement RFC7559 ipv6 router solicitation backoff, from Maciej
    Żenczykowski.

21) Add L3 mode to ipvlan, from Mahesh Bandewar.

22) Support 802.1ad in mlx4, from Moshe Shemesh.

23) Support hardware LRO in mediatek driver, from Nelson Chang.

24) Add TC offloading to mlx5, from Or Gerlitz.

25) Convert various drivers to ethtool ksettings interfaces, from
    Philippe Reynes.

26) TX max rate limiting for cxgb4, from Rahul Lakkireddy.

27) NAPI support for ath10k, from Rajkumar Manoharan.

28) Support XDP in mlx5, from Rana Shahout and Saeed Mahameed.

29) UDP replicast support in TIPC, from Richard Alpe.

30) Per-queue statistics for qed driver, from Sudarsana Reddy Kalluru.

31) Support BQL in thunderx driver, from Sunil Goutham.

32) TSO support in alx driver, from Tobias Regnery.

33) Add stream parser engine and use it in kcm.

34) Support async DHCP replies in ipconfig module, from Uwe
    Kleine-König.

35) DSA port fast aging for mv88e6xxx driver, from Vivien Didelot.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1715 commits)
  mlxsw: switchx2: Fix misuse of hard_header_len
  mlxsw: spectrum: Fix misuse of hard_header_len
  net/faraday: Stop NCSI device on shutdown
  net/ncsi: Introduce ncsi_stop_dev()
  net/ncsi: Rework the channel monitoring
  net/ncsi: Allow to extend NCSI request properties
  net/ncsi: Rework request index allocation
  net/ncsi: Don't probe on the reserved channel ID (0x1f)
  net/ncsi: Introduce NCSI_RESERVED_CHANNEL
  net/ncsi: Avoid unused-value build warning from ia64-linux-gcc
  net: Add netdev all_adj_list refcnt propagation to fix panic
  net: phy: Add Edge-rate driver for Microsemi PHYs.
  vmxnet3: Wake queue from reset work
  i40e: avoid NULL pointer dereference and recursive errors on early PCI error
  qed: Add RoCE ll2 & GSI support
  qed: Add support for memory registeration verbs
  qed: Add support for QP verbs
  qed: PD,PKEY and CQ verb support
  qed: Add support for RoCE hw init
  qede: Add qedr framework
  ...
2016-10-05 10:11:24 -07:00
Raju Lakkaraju a4cc96d1f0 net: phy: Add Edge-rate driver for Microsemi PHYs.
Edge-rate:
As system and networking speeds increase, a signal's output transition,
also know as the edge rate or slew rate (V/ns), takes on greater importance
because high-speed signals come with a price. That price is an assortment of
interference problems like ringing on the line, signal overshoot and
undershoot, extended signal settling times, crosstalk noise, transmission
line reflections, false signal detection by the receiving device and
electromagnetic interference (EMI) -- all of which can negate the potential
gains designers are seeking when they try to increase system speeds through
the use of higher performance logic devices. The fact is, faster signaling
edge rates can cause a higher level of electrical noise or other type of
interference that can actually lead to slower line speeds and lower maximum
system frequencies. This parameter allow the board designers to change the
driving strange, and thereby change the EMI behavioral.

Edge-rate parameters (vddmac, edge-slowdown) get from Device Tree.

Tested on Beaglebone Black with VSC 8531 PHY.

Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microsemi.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-04 00:47:30 -04:00
Wei Ni 6c7c324570 thermal: tegra: add hw-throttle for Tegra132
Tegra132 use CCROC throttle registers to configure
pulse skiper, set these registers to enable throttle
function for Tegra132.

Signed-off-by: Wei Ni <wni@nvidia.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2016-09-27 14:02:32 +08:00
Lucas Stach b1d51b448e clk: imx6: fix i.MX6DL clock tree to reflect reality
The current clock tree only implements the minimal set of differences
between the i.MX6Q and the i.MX6DL, but that doesn't really reflect
reality.

Apply the following fixes to match the RM:
- DL has no GPU3D_SHADER_SEL/PODF, the shader domain is clocked by
  GPU3D_CORE
- GPU3D_SHADER_SEL/PODF has been repurposed as GPU2D_CORE_SEL/PODF
- GPU2D_CORE_SEL/PODF has been repurposed as MLB_SEL/PODF

Cc: stable@vger.kernel.org
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-09-20 16:52:37 -07:00
Kalle Kankare 377d6479d2 clk: imx53: Add clocks configuration
Add clocks configuration for CSI, FIRI and IEEE1588.

Signed-off-by: Fabien Lahoudere <fabien.lahoudere@collabora.co.uk>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-09-20 16:52:06 -07:00
Arnd Bergmann 53570cbc18 Amlogic driver updates for v4.9, 2nd round
- media: update IR support for newer SoCs
 - firmware: add secure monitor driver
 - net: new stmmac glue driver
 - usb: udd DWC2 support for meson-gxbb
 - clocks: expose more clock IDs for use by DT
 - DT binding updates
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJX2Z0aAAoJEFk3GJrT+8ZlkxoQAI0FJkQ371touZbMRSirMCdG
 fyx7ZZWGntw9yHCqcfVGLxy6oBk6bABWOWJzqGIBeTyn7qDoOqc4ec+pIWg7KECS
 h/yrJLGPQofI0Hm/6nzZikrjrK1h74c6bhkjRsAfqKCyq0AcEnH8cu1kAZmkwyJq
 osU1U/MhRLkIs6UZsc6H2nlsbSw8Ji4ZkSDfT/1P4SUqHgtz9k5PNYCEkPDGK23F
 1f1N3zYpqJVqAqucdLhTBsE56vSVzrAXLEsIwpaYCpEzuRO8MyjYP7SiKnky/5Za
 WAxz+hKufleqvvDqIK1zWvE/in4SyHrg9eVSHac/xbbDsUKy11RuJ2VasqT6xUOM
 r8oi0o1ot0IkMCJrA1Ogey0GqcSoyVUzy5FM+4SOz+M7IctLt7ZV0aVDmfXvG21f
 iQLZ7bPmgaj2kck95ppqc8saz0EIt32fJBaI3XvoG9PTpQeoYI7vok2k1l06kYQI
 3U6r7Zui4mj9PE2aFAEe3BpY2EbJDj8Vn+mtX4NtkCwS0PwZKkiUgZXF3H/qix3T
 +jv9yps2dLhihd4y6RcySVM3/PWuM7A8tU9oRBE+sttf2MiQzXvMPNM/GH0qOVEI
 3flZ6tsSLmj8jmFyOdqaxz8MuDo9KNi9b+AijPqWm+D0UfPPqFKnR6bvM4F496Dx
 4fG2a7JtDJUAz8e++Jtc
 =DlpW
 -----END PGP SIGNATURE-----

Merge tag 'amlogic-drivers-2' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/late

Pull "Amlogic driver updates for v4.9, 2nd round" from Kevin Hilman:

- media: update IR support for newer SoCs
- firmware: add secure monitor driver
- net: new stmmac glue driver
- usb: udd DWC2 support for meson-gxbb
- clocks: expose more clock IDs for use by DT
- DT binding updates

* tag 'amlogic-drivers-2' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: (21 commits)
  clk: gxbb: expose i2c clocks
  clk: gxbb: expose USB clocks
  clk: gxbb: expose spifc clock
  clk: gxbb: expose MPLL2 clock for use by DT
  Documentation: dt-bindings: Add documentation for the Meson USB2 PHYs
  usb: dwc2: add support for Meson8b and GXBB SoCs
  net: stmmac: update the module description of the dwmac-meson driver
  net: stmmac: add a glue driver for the Amlogic Meson 8b / GXBB DWMAC
  stmmac: introduce get_stmmac_bsp_priv() helper
  net: dt-bindings: Document the new Meson8b and GXBB DWMAC bindings
  clk: meson-gxbb: Export PWM related clocks for DT
  meson: clk: Add support for clock gates
  gxbb: clk: Adjust MESON_GATE macro to be shared with meson8b
  clk: meson: Copy meson8b CLKID defines to private header file
  meson: clk: Rename register names according to Amlogic datasheet
  meson: clk: Move register definitions to meson8b.h
  clk: meson: Rename meson8b-clkc.c to reflect gxbb naming convention
  nvmem: amlogic: Add Amlogic Meson EFUSE driver
  firmware: Amlogic: Add secure monitor driver
  media: rc: meson-ir: Add support for newer versions of the IR decoder
  ...
2016-09-19 17:49:07 +02:00
Arnd Bergmann 2008ee090c Topic branch for Samsung DeviceTree cleanup for 4.9.
Replace in DT sources hard-coded values for pinctrl configuration like pull
 up/down, drive strength and function. This makes the DTS easier to read,
 especially that some drive strengths values are quite non-obvious.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJX3r13AAoJEME3ZuaGi4PX1yUQAIgtpY7loocP8eZnvKSxL0Sv
 mFDpDIyTot75P4enDJ762rqk12dyEKfBwOAhw3s1oFOUQyVKC+vQaC0Rg2xtGSPH
 b+SBGSi8qhtjp3Idw6LNxgDYlgaKSbAVjIDNl4Wb6se0/CsV2yWrHpUT0oPuxlEb
 zUe9qmBzuDvYkLiHiHSKtGFw0Slg1XiTS82Jp0xvpX8OwYNjz1AYJAsnsFcns0RH
 aNtMlndVq7qVMyJnksnKm7E4DCAqLEesV9h7dqDDAnqgBKN40PK4uN2yjkA/YCra
 ZbrLf5BTHDnEbaoctVwTjXh5uFDK0Jdu/F7U6XKKOxM9Ld7+0SVSeOJozK0Noi2S
 7UN57Dga4xRzaDqQp0Bh7nucUeEsMPuVYiwG89e+LEYkCkF+P0hG38l3tMMxA6XA
 8SDqeeTyEYu8q+2olFlkCFCqpOU/WcIdoWfbwbVgxRlx9UmaC6h7bmURLlHIsl5l
 U1iGubxuGc3QEBi8rrFKNoImTnTqwfffwcLEawCGcji+qNRKV0gZUGW/gceLs4Db
 7M3Vw43pM9Z1yc2R2D+LVLWaa7FUYAajD5zyAZ4Czhr2G3ZW670LVHp0PU8nqCGj
 5Yo5nkNEiutyQ/77wp72aEzrFv9rOlpm8XY4kuZ3RRFzYSt6xbZYS1oO7QGk9Tey
 DqAIGXIaU80bT87Hc7A3
 =NN8A
 -----END PGP SIGNATURE-----

Merge tag 'samsung-dt-pinctrl-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt

Pull "Topic branch for Samsung DeviceTree cleanup for 4.9" from Krzysztof Kozłowski:

Replace in DT sources hard-coded values for pinctrl configuration like pull
up/down, drive strength and function. This makes the DTS easier to read,
especially that some drive strengths values are quite non-obvious.

* tag 'samsung-dt-pinctrl-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  ARM: dts: s3c64xx: Use macros for pinctrl configuration
  ARM: dts: s3c2416: Use macros for pinctrl configuration
  ARM: dts: s5pv210: Use macros for pinctrl configuration
  ARM: dts: s3c64xx: Use common macros for pinctrl configuration
  ARM: dts: exynos: Fix mismatched values of SD drive strengh configuration on exynos4415
  ARM: dts: exynos: Fix mismatched value for SD4 pull up/down configuration on exynos4210
  ARM: dts: exynos: Use macros for pinctrl configuration on exynos542x/exynos5800
  ARM: dts: exynos: Use macros for pinctrl configuration on exynos5410
  ARM: dts: exynos: Use macros for pinctrl configuration on exynos5260
  ARM: dts: exynos: Use macros for pinctrl configuration on exynos5250
  ARM: dts: exynos: Use macros for pinctrl configuration on exynos4415
  ARM: dts: exynos: Use macros for pinctrl configuration on exynos4x12
  ARM: dts: exynos: Use macros for pinctrl configuration on exynos4210
  ARM: dts: exynos: Use macros for pinctrl configuration on exynos3250
  ARM: dts: exynos: Use common macros for pinctrl configuration
  pinctrl: dt-bindings: samsung: Update documentation with new macros
  pinctrl: dt-bindings: samsung: Add header with values used for configuration
2016-09-19 17:46:56 +02:00
Vivek Gautam dc19b6f5be clk: Add USB3 PHY reset lines
Adding missing reset lines for USB 3.0 PHY.

Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-09-16 16:19:50 -07:00
Krzysztof Kozlowski 5db7e3bb87 pinctrl: dt-bindings: samsung: Add header with values used for configuration
Hard-coded pinctrl configuration values are scattered through DTS files.
The numbers are difficult to decode by human, especially without the
datasheet.  Additionally the drive strength differs between S3C64xx,
S5PV210 and Exynos SoC families increasing the confusion.

The header will help making this more readable and maintainable.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-16 13:31:31 +02:00
Jun Nie ca0233285a clk: zx: register ZX296718 clocks
The ZX296718 clocks are statically listed and registered. More
clock will be added later.

Signed-off-by: Jun Nie <jun.nie@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-09-14 13:50:33 -07:00
Jerome Brunet dfdd7d4af6 clk: gxbb: expose i2c clocks
I2C and AO_I2C clocks are needed for the i2c driver, expose to DT
(and comment out in clk driver)

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2016-09-14 11:24:04 -07:00
Martin Blumenstingl 5dbe7890e6 clk: gxbb: expose USB clocks
USB0_DDR_BRIDGE and USB1_DDR_BRIDGE1 are needed for the related
dwc2 usb controller. USB, USB0 and USB1 are needed for the PHYs.
Expose these clocks to DT and comment out in clk driver.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2016-09-14 11:23:55 -07:00
Jerome Brunet f2120a8b09 clk: gxbb: expose spifc clock
SPI clock is needed for the spifc driver, expose to DT
(and comment out in the clk driver)

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2016-09-14 11:22:49 -07:00
Martin Blumenstingl ed6f4b5180 clk: gxbb: expose MPLL2 clock for use by DT
This exposes the MPLL2 clock as this is one of the input clocks of the
ethernet controller's internal mux.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2016-09-14 11:22:49 -07:00
Stephen Boyd de64f5c87d Allwinner Clock changes for 4.9
Four more SoCs converted to the new clock framework (A31, A31s, A23 and
 A33).
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJX1beIAAoJEBx+YmzsjxAgFNQQAIMCbooFBVbNTzSesGwGLBVl
 uRxO8FP8mPZPM0forHq6N6973no0l5H15I9w3x4T0ozkX18KwsI/dj8Q8ZiAl/S8
 gqo8rZARBBKy4rspQQazqFytSCZF+KznDigChhA1KeyG6fbob2bKdYtMRppH+l8F
 A3HpreGcqKrWv6rBEshYSt9fzFJeoi0W7Uzb0v4wQXuXuVDq/Zpp+fcu+2to/fOO
 CaI2Dh8Glcfn3gDwk7cZ94NTZud81B/zLqulcOSTV8CP1KQ/ovs6K8UvsziCCw0J
 oMD4t6kfK8BwCt1hsZTA9XjgIT0Hx1rj7wcTApa88BEea+hU0ulXiwdI1mB/x1TU
 E880Rp0KIDoldaUBggYTut/vTBWwpOP6lTRWp/EoGfs9Br9VEu1X0wzlihBdAhsQ
 IhR27GK1wp1fw0ahTFKCYNWTU5fl8iy40gGDqjpaAXnlqMEmIcEthyqdie/n83o+
 HvpUhfp9emnrXn5+y3uNeGc9M3O5BxpuyIjY4jChc5zOrrqvSAio1ifHP0TNDHEe
 ZW3TJSoqU8QfCaQTJKxVzC2LG0ZXIjwTepFtqrx5DrFOkc1M3tYod0L/80nau99v
 gVghFmaPVnS8HWmuKjlh/jXsI4AqcoESF9kv3bmecDuDc5cWIHkcI/97lsGpXIS8
 rSteIQUjRbQkwuo4TyA8
 =Ff/R
 -----END PGP SIGNATURE-----

Merge tag 'sunxi-clk-for-4.9' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into clk-next

Pull Allwinner clock driver changes from Maxime Ripard:

Four more SoCs converted to the new clock framework (A31, A31s, A23 and
A33).

* tag 'sunxi-clk-for-4.9' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux:
  clk: sunxi-ng: Add hardware dependency
  clk: sunxi-ng: Add A23 CCU
  clk: sunxi-ng: Add A33 CCU support
  clk: sunxi-ng: Add N-class clocks support
  clk: sunxi-ng: mux: Add mux table macro
  clk: sunxi-ng: div: Allow to set a maximum
  clk: sunxi-ng: div: Add kerneldoc for the _ccu_div structure
  clk: sunxi-ng: div: Add mux table macros
  clk: sunxi-ng: Add A31/A31s clocks
  clk: sunxi-ng: mux: Add clk notifier functions
  clk: sunxi-ng: mux: support fixed pre-dividers on multiple parents
  clk: sunxi-ng: mux: Add support for mux tables
  clk: sunxi-ng: mux: Rename mux macro to be consistent
  clk: sunxi-ng: nkm: Add mux to support multiple parents
  clk: sunxi-ng: mux: Increase fixed pre-divider div size
2016-09-14 11:10:15 -07:00
Stephen Boyd 3db385ea14 In addition to a few clean up and code consolidation patches this
includes:
 - addition of sound subsystem related clocks for Exynos5410 SoC
   (EPLL, PDMA) and support for "samsung,exynos5410-audss-clock"
   compatible in the clk-exynos-audss driver,
 - addition of DRAM controller related clocks for exynos5420,
 - MAINTAINERS update adding Chanwoo Choi as the Samsung SoC
   clock drivers co-maintainer.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABCAAGBQJX0thBAAoJEE1bIKeAnHqLjhwP/1sNlCVU30OQYAsVOG8doaL2
 tP4vQmxKWREMK+gg1iWyq6dhAWhOO/YdSL9KgvHAkCKolJfpoGfJjiPm0Pja+TOq
 pIHOdE5ql2Cb+PxeJoLQZxfcOsNczt0OorVWgeTJdDyB+/VXaGvVKYwoZFSUoQ5m
 nIPfAut5ynIVIk86EBjuSr61sUMoTEzVD7HFGAzYF78K4UPIsscfM43UWSHXqwiX
 rsxPZTzjETmtmjSPSP+m8mOY04nds0kFDWSPaP6lzmSQYC7jhGQxM7Pl4fmWBYho
 gqL1z4gcp4vHZYRHhtClOuKe1+dlXNRLRaFQSRgIFgpfX/AfQh0Hj35I7QhCmD3N
 LDNTWmiFxLVjPET0Z4NykPRzCfIcWYT4S2U2qJ857C2FG1v3DD/xiZ13UvbySTNi
 nh/Go6Jp1bbPRQMYxCcMY1a1RJ180qjsNCleC5/5w6KP0DWWJFVDcqFr3NLcmN7e
 nikD31moCKLEvPrd2Glezajv1IHD6K/c06cBcTHGBu2BobOrsBstTvjiIfDcjtC/
 uZymcsWUztPaM1iPLJ0Dzsrw2TkGcukrYm3R4kN4iRzDJK5XPh4dFUgquJOYlyNH
 PgYGBMXocMrBXNOF9lQ9mAsiO9JCfZLjXH9k2NP3w2P0YNTTSfIjBuBvySSiGK6x
 aYF0CXwKNDfJhmep+PzE
 =lEKC
 -----END PGP SIGNATURE-----

Merge tag 'clk-v4.9-samsung' of git://linuxtv.org/snawrocki/samsung into clk-next

Pull samsung clk driver updates from Sylwester Nawrocki:

In addition to a few clean up and code consolidation patches this
includes:
- addition of sound subsystem related clocks for Exynos5410 SoC
  (EPLL, PDMA) and support for "samsung,exynos5410-audss-clock"
  compatible in the clk-exynos-audss driver,
- addition of DRAM controller related clocks for exynos5420,
- MAINTAINERS update adding Chanwoo Choi as the Samsung SoC
  clock drivers co-maintainer.

* tag 'clk-v4.9-samsung' of git://linuxtv.org/snawrocki/samsung:
  clk: samsung: Add support for EPLL on exynos5410
  clk: samsung: clk-exynos-audss: Whitespace and debug trace cleanup
  clk: samsung: clk-exynos-audss: Add exynos5410 compatible
  clk: samsung: clk-exynos-audss: controller variant handling rework
  clk: samsung: Use common registration function for pll2550x
  clk: samsung: exynos5410: Expose the peripheral DMA gate clocks
  clk: samsung: exynos5420: Add clocks for CMU_CDREX domain
  clk: samsung: exynos5410: Use samsung_cmu_register_one() to simplify code
  clk: samsung: exynos5260: Move struct samsung_cmu_info to init section
  MAINTAINERS: Add myself as Samsung SoC clock drivers co-maintainer
  clk: samsung: exynos5410: Add clock IDs for PDMA and EPLL clocks
  clk: samsung: Add clock IDs for the CMU_CDREX (DRAM Express Controller)
2016-09-14 11:06:47 -07:00
Arnd Bergmann e08644b0c7 Amlogic 64-bit DT changes for v4.9
- add watchdog, reset, IR remote, PWM
 - add secure monitor and eFuse
 - add always-on (AO) domain clock and reset
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJXyhPZAAoJEFk3GJrT+8ZlIQkP/1Xyb2A483CPDL4JZP/BHDjd
 DXLpjTeiL7JVtfCdjRNFL1mOMEwtbhjuwklRsBaHIGGHg8TK26RJAdxzmRPtZ2fd
 U8wLrSRCdesF6bwI4j8zomm2tAD3a0Ujik21AROKZj1pWh/n9k0m+CrPgwBCZoA9
 yM1/usSP0Gm0kLWgH1mwVjGJOgf7Xi6TGHBsNyy1zl+Jj4uTf+aB6auHygemznvi
 cANjibsOFY+KvcE19/y/yGJL7nFeln9C6TE1igDh2m/e+FR0+Ng3p1qtZxb2jsnv
 TOFROdTyEjPN9tmJQxoJfjpY2PUXE1rKezGnJBVBtpCijvSVl39goDvobUajFJ67
 g5O483kwsjEqx7uOvl4WU/kFqw2HunpILSR5QuJJ15n9kxVN+tNeAjIxo/dG7wgD
 8Byeu5FGa2va6YNEkQF7UGagKIgIloG1N59OkFwLWwMem/xtd1nuiSoLlyuw82/C
 EXu9N2I9UbOA3s6sEEJBazvtk+ueHaENwIFLo5yPDOLCKmt8/ii4dV4QWzn9R7Zy
 d2NZpNjPj/eBRDC6O+MgJVAEuikjvfn9tUcuVQGjJ+pq3mtpAxzdclVHMYlKclON
 /ykQqRZPE33CDRBdp5TCbJp/UMyXyjhdhcaAaY7yYPpjkEjFEaLWTMH7wua04754
 K57RdpXb1kQG7qGAy9xF
 =UZHB
 -----END PGP SIGNATURE-----

Merge tag 'amlogic-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/late

Pull "Amlogic 64-bit DT changes for v4.9" from Kevin Hilman:

- add watchdog, reset, IR remote, PWM
- add secure monitor and eFuse
- add always-on (AO) domain clock and reset

* tag 'amlogic-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
  ARM64: dts: amlogic: gxbb: Enable NVMEM
  documentation: Add nvmem bindings documentation
  ARM64: dts: amlogic: gxbb: Enable secure monitor
  documentation: Add secure monitor bindings documentation
  ARM64: dts: meson-gxbb: Add PWM pinctrl nodes
  ARM64: dts: meson-gxbb: Enable the the IR decoder on supported boards
  ARM64: dts: meson-gxbb: Add Infrared Remote Controller decoder
  dt-bindings: media: meson-ir: Add Meson8b and GXBB compatible strings
  ARM64: dts: amlogic: add the input pin for the IR remote
  ARM64: dts: meson-gxbb: Add GXBB AO Clock and Reset node
  clk: meson: Fix invalid use of sizeof in gxbb_aoclkc_probe()
  clk: meson: Add GXBB AO Clock and Reset controller driver
  dt-bindings: clock: reset: Add GXBB AO Clock and Reset Bindings
  ARM64: DTS: meson-gxbb: switch ethernet to real clock
  ARM64: dts: amlogic: meson-gxbb: Add watchdog node
2016-09-14 17:34:35 +02:00
Arnd Bergmann 1f480960e0 32bit Rockchip devicetree changes containing two new rk3288 boards (Fennec
and Firefly-reload), display support for the rk3288-evb, support for the
 recently added firmware reboot-flag support and some housekeeping cleanups.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABCAAGBQJX0WScAAoJEPOmecmc0R2BEycIAK7/5hV5kyeEA3vx1VaLoRH0
 lFHMQyaucbqQCuAu6U6NBwyVGnirvd5HG+KRA34RncLfVT5Fnv81u43byKkaUI/I
 8NH6l4FvcND76J1IIR6XZl8cGxaRCT1bkUgII4MFaMaQBxY19gbLCDuBVLVJEhK7
 lUy7lG/6j/DvIwU0UevGdB/bdCPZ0WZ6n9InF4xIMJ6PJYI5/BctSpxfJr47hTjQ
 a0z637dqXv08L7LRqVtXn+1tJZ6QJdHrtsEavGFOQEzl+n2rRFuBC63+v98h7WCc
 1gnyfWbR+NMZOH13imBiOiK7Ap/F5Qm1uF5bfJhoJGbGazv5NcZqPlZ0CocrAXY=
 =gktZ
 -----END PGP SIGNATURE-----

Merge tag 'v4.9-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt

Pull "Rockchip dts32 changes for 4.9" from Heiko Stübner:

32bit Rockchip devicetree changes containing two new rk3288 boards (Fennec
and Firefly-reload), display support for the rk3288-evb, support for the
recently added firmware reboot-flag support and some housekeeping cleanups.

* tag 'v4.9-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  ARM: dts: rockchip: Add sensor-supplies on PopMetal-RK3288 board
  ARM: dts: rockchip: fix L3G4200D i2c address on PopMetal-RK3288 board
  ARM: dts: rockchip: enable usbotg for Popemtal-rk3288 board
  ARM: dts: rockchip: add missing regulators for firefly reload board
  ARM: dts: rockchip: remove excess sd properties from firefly reload
  ARM: dts: rockchip: add syscon-reboot-mode DT node
  soc: rockchip: add reboot-mode header
  ARM: dts: rockchip: move rk3288 usbphy under the GRF node
  ARM: dts: rockchip: add rk3288-firefly-reload
  ARM: dts: rockchip: add dts for RK3288-Fennec boards
  ARM: dts: rockchip: add the panel power supply for rk3288-evb board with rk808 pmu
  ARM: dts: rockchip: add the panel power supply for rk3288-evb board with act8846 pmu
  ARM: dts: rockchip: add eDP/panel display device nodes for rk3288-evb
2016-09-13 17:38:34 +02:00
Dave Airlie 8506912b96 Merge branch 'drm-tda998x-devel' of git://git.armlinux.org.uk/~rmk/linux-arm into drm-next
This adds the ASoC codec interfaces for TDA998x HDMI audio from
Jyri Sarha.

* 'drm-tda998x-devel' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: dts: am335x-boneblack: Add HDMI audio support
  drm/i2c: tda998x: Register ASoC hdmi-codec and add audio DT binding
  drm/i2c: tda998x: Improve tda998x_configure_audio() audio related pdata
2016-09-13 10:28:17 +10:00
Maxime Ripard d05c748bd7 clk: sunxi-ng: Add A33 CCU support
This commit introduces the clocks found in the Allwinner A33 CCU.

Since this SoC is very similar to the A23, and we share a significant share
of the DTSI, the clock IDs that are going to be used will also be shared
with the A23, hence the name of the various header files.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
2016-09-10 11:41:19 +02:00
Sylwester Nawrocki 1d9aa64c37 clk: samsung: Use common registration function for pll2550x
There is no such significant differences in pll2550x PLL type
to justify a separate registration function.  This patch adapts
exynos5440 driver to use the common function and removes
samsung_clk_register_pll2550x().

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
2016-09-09 17:35:10 +02:00
Sylwester Nawrocki 58d6506f32 clk: samsung: exynos5410: Add clock IDs for PDMA and EPLL clocks
The PDMA{0,1} and EPLL clock IDs are added separately in this
patch so the patch can be merged to the arm-soc tree as dependency.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
2016-09-09 10:13:02 +02:00
Chanwoo Choi 3b6b717218 clk: samsung: Add clock IDs for the CMU_CDREX (DRAM Express Controller)
This patch adds missing clock IDs for CMU_CDREX (DRAM Express Controller)
which generates clocks for DRAM and NoC (Network on Chip) busses.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
2016-09-09 10:11:44 +02:00
Jyri Sarha 7e567624dc drm/i2c: tda998x: Register ASoC hdmi-codec and add audio DT binding
Register ASoC HDMI codec for audio functionality and adds device tree
binding for audio configuration.

With the registered HDMI codec the tda998x node can be used like a
regular codec node in ASoC card configurations. HDMI audio info-frame
and audio stream header is generated by the ASoC HDMI codec. The codec
also applies constraints for available sample-rates based on Edid Like
Data from the display. The device tree binding document has been
updated [1].

Part of this patch has been inspired by Jean Francoise's "drm/i2c: tda998x:
Add support of a DT graph of ports"-patch [2]. There may still be some
identical lines left from the original patch and some of the ideas
have come from there.

[1] Documentation/devicetree/bindings/display/bridge/tda998x.txt
[2] http://mailman.alsa-project.org/pipermail/alsa-devel/2015-July/095255.html

Signed-off-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2016-09-07 13:10:10 +01:00
Stephen Boyd 9bb87c027c The biggest addition is probably the special clock-type for ddr clock
control. While reading that clock is done the normal way from the
 registers, setting it always requires some sort of special handling
 to let the system survive this addition.
 
 As the commit message explains, there are currently 3 handling-types
 known. General SRAM-based code on rk3288 and before (which is waiting
 essentially for the PIE support that is currently being worked on),
 SCPI-based clk setting on the rk3368 through a coprocessor, which we
 might support once the support for legacy scpi-variants has matured
 and now on the rk3399 (and probably later) using a dcf controller that
 is controlled from the arm-trusted-firmware and gets accessed through
 firmware calls from the kernel. This is the variant we currently
 support, but the clock type is made to support the other variants in
 the future as well.
 
 Apart from that slightly bigger chunk, we have a mix of PLL rates,
 clock-ids and flags mainly for the rk3399.
 
 And interestingly an iomap fix for the legacy gate driver, where I
 hopefully could deter the submitter from actually using that in any
 new works.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABCAAGBQJXzrz5AAoJEPOmecmc0R2B0NMH/0SGrQnrUsaq0cvjZPaq8jTD
 nJDVIRw099HNM3QZCfy+FZbSsnmex93clX+Fn4UdehplrCZ8ExX1wpPkMwvFcPJF
 M34YyFXx5MU9OmDsJXd1UlGRD/mH0L6hKnmfBQiPbK33ObXbr7LCC1L3go+oYABN
 eHaOzO1KIcdoCQd6RlVAQHCsiDy8akUJ68P2uACHZ7VVgvGw2f3NdJhOKTD5lCuf
 WH/MRo9X9bPDGHpFJIX+mZzZgYsMqUjyF/mYU/VMoH70w+YZTnfcbrYpJ0VkgBYd
 aQF2B9VXhed9EQG3Gfu+jgsWoWLed9AJf83UP6eMsPTPLNQBqgzoDZwylbY1Szk=
 =LjDG
 -----END PGP SIGNATURE-----

Merge tag 'v4.9-rockchip-clk1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into clk-next

Pull rockchip clk driver updates from Heiko Stuebner:

The biggest addition is probably the special clock-type for ddr clock
control. While reading that clock is done the normal way from the
registers, setting it always requires some sort of special handling
to let the system survive this addition.

As the commit message explains, there are currently 3 handling-types
known. General SRAM-based code on rk3288 and before (which is waiting
essentially for the PIE support that is currently being worked on),
SCPI-based clk setting on the rk3368 through a coprocessor, which we
might support once the support for legacy scpi-variants has matured
and now on the rk3399 (and probably later) using a dcf controller that
is controlled from the arm-trusted-firmware and gets accessed through
firmware calls from the kernel. This is the variant we currently
support, but the clock type is made to support the other variants in
the future as well.

Apart from that slightly bigger chunk, we have a mix of PLL rates,
clock-ids and flags mainly for the rk3399.

And interestingly an iomap fix for the legacy gate driver, where I
hopefully could deter the submitter from actually using that in any
new works.

* tag 'v4.9-rockchip-clk1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  clk: rockchip: use the dclk_vop_frac clock ids on rk3399
  clk: rockchip: drop CLK_SET_RATE_PARENT from rk3399 fractional dividers
  clk: rockchip: add 2016M to big cpu clk rate table on rk3399
  clk: rockchip: add rk3399 ddr clock support
  clk: rockchip: add dclk_vop_frac ids for rk3399 vop
  clk: rockchip: add new clock-type for the ddrclk
  soc: rockchip: add header for ddr rate SIP interface
  clk: rockchip: add SCLK_DDRC id for rk3399 ddrc
  clk: rockchip: handle of_iomap failures in legacy clock driver
  clk: rockchip: mark rk3399 hdcp_noc and vio_noc as critical
  clk: rockchip: use general clock flag when registering pll
  clk: rockchip: delete the CLK_IGNORE_UNUSED from aclk_pcie on rk3399
  clk: rockchip: add 65MHz and 106.5MHz rates to rk3399 plls used for HDMI
2016-09-06 18:12:24 -07:00
Chris Brandt 969244f9c7 ARM: dts: r7s72100: add ethernet clock to device tree
Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-09-05 14:32:39 +02:00
Yakir Yang e33075db73 clk: rockchip: add dclk_vop_frac ids for rk3399 vop
Export the dclk_vop_frac out, so we can set the dclk_vop as the
child of dclk_vop_frac, and then we can start to take use of
the fractional dividers.

Signed-off-by: Yakir Yang <ykk@rock-chips.com>
Signed-off-by: Chris Zhong <zyw@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-09-04 22:15:11 +02:00
Michael Turquette e918a18d2e Merge branch 'clk-meson-gxbb' into clk-next 2016-09-02 18:13:40 -07:00
Neil Armstrong 19a2a85d71 clk: meson-gxbb: Export PWM related clocks for DT
Add the PWM related clocks in order to be referenced as PWM source
clocks.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
Link: lkml.kernel.org/r/1471870177-10609-1-git-send-email-narmstrong@baylibre.com
2016-09-02 16:33:30 -07:00
Alexander Müller 0f32e64b22 clk: meson: Copy meson8b CLKID defines to private header file
Only expose future CLKID constants if necessary. This patch
removes CLK_NR_CLKS from the DT bindings but leaves all previously
defined CLKIDs there to keep backward compatibility.

Signed-off-by: Alexander Müller <serveralex@gmail.com>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
Link: lkml.kernel.org/r/1472319654-59048-5-git-send-email-serveralex@gmail.com
2016-09-01 17:31:52 -07:00
Michael Turquette 1bf13f4825 Merge remote-tracking branch 'clk/clk-meson-gxbb-ao' into clk-meson-gxbb 2016-09-01 17:31:33 -07:00
Lin Huang 7fbdfcd687 clk: rockchip: add SCLK_DDRC id for rk3399 ddrc
Add the needed id for the ddr clock.

Signed-off-by: Lin Huang <hl@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-08-31 18:19:03 +02:00
Neil Armstrong eb87a669dd mfd: qcom-rpm: Add support for pm8018 RPM Regulator
In order to support the Qualcomm MDM9615 SoC, add support for the
RPM regulator entries in the qcom-rpm driver.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-08-31 09:33:43 +01:00
Chen-Yu Tsai c6e6c96d8f clk: sunxi-ng: Add A31/A31s clocks
Add a new style driver for the clock control unit in Allwinner A31/A31s.

A few clocks are still missing:

    - MIPI PLL's HDMI mode support
    - EMAC clock

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-08-25 22:31:43 +02:00
Srinivas Kandagatla 62d157587e clk: gcc-msm8996: add missing pcie phy reset lines
This patch adds missing 2 PCIE common reset lines.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-08-25 13:02:33 -07:00
Maxime Coquelin ca9f71f057 dt-bindings: mfd: Add STM32F4 RCC numeric constants into DT include file
Ths patch lists STM32F4's RCC numeric constants.
It will be used by clock and reset drivers, and DT bindings.

Signed-off-by: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-08-24 15:21:26 +02:00
Honghui Zhang 615cca8c0c iommu/mediatek: dt-binding: Correct the larb port offset defines for mt2701
larb2 have 23 ports, the LARB3_PORT_OFFSET should be LARB2_PORT_OFFSET
plus larb2's port number, it should be 44 instead of 43.

Signed-off-by: Honghui Zhang <honghui.zhang@mediatek.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2016-08-22 12:52:10 +02:00
Rajendra Nayak 63bb4fd6a3 clk: qcom: gdsc: Add the missing BIMC gdsc for msm8996
Add BIMC gdsc data found in MMCC part of msm8996 family of devices.

Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-08-19 12:55:19 -07:00
Stephen Boyd 43d6912417 Merge branch 'clk-meson-gxbb-ao' into clk-next
* clk-meson-gxbb-ao:
  clk: meson: Add GXBB AO Clock and Reset controller driver
  dt-bindings: clock: reset: Add GXBB AO Clock and Reset Bindings
2016-08-19 12:51:14 -07:00
Neil Armstrong edb89f126f dt-bindings: clock: reset: Add GXBB AO Clock and Reset Bindings
Add documentations and dt-bindings headers for the AO clock and reset
controller.

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-08-19 12:49:00 -07:00
Shunli Wang c3c5768346 reset: mediatek: Add MT2701 reset controller dt-binding file
Dt-binding file about reset controller is used to provide
kinds of definition, which is referenced by dts file and
IC-specified reset controller driver code.

Signed-off-by: Shunli Wang <shunli.wang@mediatek.com>
Signed-off-by: James Liao <jamesjj.liao@mediatek.com>
Signed-off-by: Erin Lo <erin.lo@mediatek.com>
Tested-by: John Crispin <blogic@openwrt.org>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-08-19 12:47:20 -07:00
Shunli Wang 1de9b21633 clk: mediatek: Add dt-bindings for MT2701 clocks
Add MT2701 clock dt-bindings, include topckgen, apmixedsys,
infracfg, pericfg and subsystem clocks.

Signed-off-by: Shunli Wang <shunli.wang@mediatek.com>
Signed-off-by: James Liao <jamesjj.liao@mediatek.com>
Signed-off-by: Erin Lo <erin.lo@mediatek.com>
Tested-by: John Crispin <blogic@openwrt.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-08-19 12:18:41 -07:00
Stephen Boyd cd1e29a93c Merge branch 'clk-qcom-9615' into clk-next
* clk-qcom-9615:
  dt-bindings: clock: Update bindings for MDM9615 GCC and LCC
  clk: mdm9615: Add support for MDM9615 Clock Controllers
  dt-bindings: Add MDM9615 DT bindings include files for GCC and LCC
2016-08-15 16:08:49 -07:00