Commit Graph

304 Commits

Author SHA1 Message Date
Florian Westphal 485fca664d ipv6: don't increase size when refragmenting forwarded ipv6 skbs
since commit 6aafeef03b ("netfilter: push reasm skb through instead of
original frag skbs") we will end up sometimes re-fragmenting skbs
that we've reassembled.

ipv6 defrag preserves the original skbs using the skb frag list, i.e. as long
as the skb frag list is preserved there is no problem since we keep
original geometry of fragments intact.

However, in the rare case where the frag list is munged or skb
is linearized, we might send larger fragments than what we originally
received.

A router in the path might then send packet-too-big errors even if
sender never sent fragments exceeding the reported mtu:

mtu 1500 - 1500:1400 - 1400:1280 - 1280
     A         R1         R2        B

1 - A sends to B, fragment size 1400
2 - R2 sends pkttoobig error for 1280
3 - A sends to B, fragment size 1280
4 - R2 sends pkttoobig error for 1280 again because it sees fragments of size 1400.

make sure ip6_fragment always caps MTU at largest packet size seen
when defragmented skb is forwarded.

Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-25 17:22:23 -04:00
Martin KaFai Lau 2647a9b070 ipv6: Remove external dependency on rt6i_gateway and RTF_ANYCAST
When creating a RTF_CACHE route, RTF_ANYCAST is set based on rt6i_dst.
Also, rt6i_gateway is always set to the nexthop while the nexthop
could be a gateway or the rt6i_dst.addr.

After removing the rt6i_dst and rt6i_src dependency in the last patch,
we also need to stop the caller from depending on rt6i_gateway and
RTF_ANYCAST.

Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Julian Anastasov <ja@ssi.bg>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-25 13:25:33 -04:00
Martin KaFai Lau fd0273d793 ipv6: Remove external dependency on rt6i_dst and rt6i_src
This patch removes the assumptions that the returned rt is always
a RTF_CACHE entry with the rt6i_dst and rt6i_src containing the
destination and source address.  The dst and src can be recovered from
the calling site.

We may consider to rename (rt6i_dst, rt6i_src) to
(rt6i_key_dst, rt6i_key_src) later.

Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Julian Anastasov <ja@ssi.bg>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-25 13:25:32 -04:00
Martin KaFai Lau 286c2349f6 ipv6: Clean up ipv6_select_ident() and ip6_fragment()
This patch changes the ipv6_select_ident() signature to return a
fragment id instead of taking a whole frag_hdr as a param to
only set the frag_hdr->identification.

It also cleans up ip6_fragment() to obtain the fragment id at the
beginning instead of using multiple "if" later to check fragment id
has been generated or not.

Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Julian Anastasov <ja@ssi.bg>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-25 13:25:32 -04:00
Vlad Yasevich e87a468eb9 ipv6: Fix udp checksums with raw sockets
It was reported that trancerout6 would cause
a kernel to crash when trying to compute checksums
on raw UDP packets.  The cause was the check in
__ip6_append_data that would attempt to use
partial checksums on the packet.  However,
raw sockets do not initialize partial checksum
fields so partial checksums can't be used.

Solve this the same way IPv4 does it.  raw sockets
pass transhdrlen value of 0 to ip_append_data which
causes the checksum to be computed in software.  Use
the same check in ip6_append_data (check transhdrlen).

Reported-by: Wolfgang Walter <linux@stwm.de>
CC: Wolfgang Walter <linux@stwm.de>
CC: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-14 22:27:03 -04:00
Markus Stenberg e16e888b52 ipv6: Fixed source specific default route handling.
If there are only IPv6 source specific default routes present, the
host gets -ENETUNREACH on e.g. connect() because ip6_dst_lookup_tail
calls ip6_route_output first, and given source address any, it fails,
and ip6_route_get_saddr is never called.

The change is to use the ip6_route_get_saddr, even if the initial
ip6_route_output fails, and then doing ip6_route_output _again_ after
we have appropriate source address available.

Note that this is '99% fix' to the problem; a correct fix would be to
do route lookups only within addrconf.c when picking a source address,
and never call ip6_route_output before source address has been
populated.

Signed-off-by: Markus Stenberg <markus.stenberg@iki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-09 15:58:41 -04:00
David Miller 7026b1ddb6 netfilter: Pass socket pointer down through okfn().
On the output paths in particular, we have to sometimes deal with two
socket contexts.  First, and usually skb->sk, is the local socket that
generated the frame.

And second, is potentially the socket used to control a tunneling
socket, such as one the encapsulates using UDP.

We do not want to disassociate skb->sk when encapsulating in order
to fix this, because that would break socket memory accounting.

The most extreme case where this can cause huge problems is an
AF_PACKET socket transmitting over a vxlan device.  We hit code
paths doing checks that assume they are dealing with an ipv4
socket, but are actually operating upon the AF_PACKET one.

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-07 15:25:55 -04:00
David S. Miller c85d6975ef Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	drivers/net/ethernet/mellanox/mlx4/cmd.c
	net/core/fib_rules.c
	net/ipv4/fib_frontend.c

The fib_rules.c and fib_frontend.c conflicts were locking adjustments
in 'net' overlapping addition and removal of code in 'net-next'.

The mlx4 conflict was a bug fix in 'net' happening in the same
place a constant was being replaced with a more suitable macro.

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-06 22:34:15 -04:00
hannes@stressinduktion.org f60e5990d9 ipv6: protect skb->sk accesses from recursive dereference inside the stack
We should not consult skb->sk for output decisions in xmit recursion
levels > 0 in the stack. Otherwise local socket settings could influence
the result of e.g. tunnel encapsulation process.

ipv6 does not conform with this in three places:

1) ip6_fragment: we do consult ipv6_npinfo for frag_size

2) sk_mc_loop in ipv6 uses skb->sk and checks if we should
   loop the packet back to the local socket

3) ip6_skb_dst_mtu could query the settings from the user socket and
   force a wrong MTU

Furthermore:
In sk_mc_loop we could potentially land in WARN_ON(1) if we use a
PF_PACKET socket ontop of an IPv6-backed vxlan device.

Reuse xmit_recursion as we are currently only interested in protecting
tunnel devices.

Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-06 16:12:49 -04:00
Ian Morris 53b24b8f94 ipv6: coding style: comparison for inequality with NULL
The ipv6 code uses a mixture of coding styles. In some instances check for NULL
pointer is done as x != NULL and sometimes as x. x is preferred according to
checkpatch and this patch makes the code consistent by adopting the latter
form.

No changes detected by objdiff.

Signed-off-by: Ian Morris <ipm@chirality.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-31 13:51:54 -04:00
Ian Morris 63159f29be ipv6: coding style: comparison for equality with NULL
The ipv6 code uses a mixture of coding styles. In some instances check for NULL
pointer is done as x == NULL and sometimes as !x. !x is preferred according to
checkpatch and this patch makes the code consistent by adopting the latter
form.

No changes detected by objdiff.

Signed-off-by: Ian Morris <ipm@chirality.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-31 13:51:54 -04:00
Hannes Frederic Sowa 5a352dd0a3 ipv6: hash net ptr into fragmentation bucket selection
As namespaces are sometimes used with overlapping ip address ranges,
we should also use the namespace as input to the hash to select the ip
fragmentation counter bucket.

Cc: Eric Dumazet <edumazet@google.com>
Cc: Flavio Leitner <fbl@redhat.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-25 14:07:04 -04:00
Eric Dumazet c29390c6df xps: must clear sender_cpu before forwarding
John reported that my previous commit added a regression
on his router.

This is because sender_cpu & napi_id share a common location,
so get_xps_queue() can see garbage and perform an out of bound access.

We need to make sure sender_cpu is cleared before doing the transmit,
otherwise any NIC busy poll enabled (skb_mark_napi_id()) can trigger
this bug.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: John <jw@nuclearfallout.net>
Bisected-by: John <jw@nuclearfallout.net>
Fixes: 2bd82484bb ("xps: fix xps for stacked devices")
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-11 23:51:18 -04:00
Michal Kubeček acf8dd0a9d udp: only allow UFO for packets from SOCK_DGRAM sockets
If an over-MTU UDP datagram is sent through a SOCK_RAW socket to a
UFO-capable device, ip_ufo_append_data() sets skb->ip_summed to
CHECKSUM_PARTIAL unconditionally as all GSO code assumes transport layer
checksum is to be computed on segmentation. However, in this case,
skb->csum_start and skb->csum_offset are never set as raw socket
transmit path bypasses udp_send_skb() where they are usually set. As a
result, driver may access invalid memory when trying to calculate the
checksum and store the result (as observed in virtio_net driver).

Moreover, the very idea of modifying the userspace provided UDP header
is IMHO against raw socket semantics (I wasn't able to find a document
clearly stating this or the opposite, though). And while allowing
CHECKSUM_NONE in the UFO case would be more efficient, it would be a bit
too intrusive change just to handle a corner case like this. Therefore
disallowing UFO for packets from SOCK_DGRAM seems to be the best option.

Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-02 22:19:29 -05:00
Vlad Yasevich bf250a1fa7 ipv6: Partial checksum only UDP packets
ip6_append_data is used by other protocols and some of them can't
be partially checksummed.  Only partially checksum UDP protocol.

Fixes: 32dce968dd (ipv6: Allow for partial checksums on non-ufo packets)
Reported-by: Sabrina Dubroca <sd@queasysnail.net>
Tested-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-11 14:32:08 -08:00
David S. Miller 6e03f896b5 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	drivers/net/vxlan.c
	drivers/vhost/net.c
	include/linux/if_vlan.h
	net/core/dev.c

The net/core/dev.c conflict was the overlap of one commit marking an
existing function static whilst another was adding a new function.

In the include/linux/if_vlan.h case, the type used for a local
variable was changed in 'net', whereas the function got rewritten
to fix a stacked vlan bug in 'net-next'.

In drivers/vhost/net.c, Al Viro's iov_iter conversions in 'net-next'
overlapped with an endainness fix for VHOST 1.0 in 'net'.

In drivers/net/vxlan.c, vxlan_find_vni() added a 'flags' parameter
in 'net-next' whereas in 'net' there was a bug fix to pass in the
correct network namespace pointer in calls to this function.

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-05 14:33:28 -08:00
Vlad Yasevich 0508c07f5e ipv6: Select fragment id during UFO segmentation if not set.
If the IPv6 fragment id has not been set and we perform
fragmentation due to UFO, select a new fragment id.
We now consider a fragment id of 0 as unset and if id selection
process returns 0 (after all the pertrubations), we set it to
0x80000000, thus giving us ample space not to create collisions
with the next packet we may have to fragment.

When doing UFO integrity checking, we also select the
fragment id if it has not be set yet.   This is stored into
the skb_shinfo() thus allowing UFO to function correclty.

This patch also removes duplicate fragment id generation code
and moves ipv6_select_ident() into the header as it may be
used during GSO.

Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-03 23:06:43 -08:00
Vlad Yasevich 32dce968dd ipv6: Allow for partial checksums on non-ufo packets
Currntly, if we are not doing UFO on the packet, all UDP
packets will start with CHECKSUM_NONE and thus perform full
checksum computations in software even if device support
IPv6 checksum offloading.

Let's start start with CHECKSUM_PARTIAL if the device
supports it and we are sending only a single packet at
or below mtu size.

Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-02 19:28:05 -08:00
Vlad Yasevich 6422398c2a ipv6: introduce ipv6_make_skb
This commit is very similar to
commit 1c32c5ad6f
Author: Herbert Xu <herbert@gondor.apana.org.au>
Date:   Tue Mar 1 02:36:47 2011 +0000

    inet: Add ip_make_skb and ip_finish_skb

It adds IPv6 version of the helpers ip6_make_skb and ip6_finish_skb.

The job of ip6_make_skb is to collect messages into an ipv6 packet
and poplulate ipv6 eader.  The job of ip6_finish_skb is to transmit
the generated skb.  Together they replicated the job of
ip6_push_pending_frames() while also provide the capability to be
called independently.  This will be needed to add lockless UDP sendmsg
support.

Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-02 19:28:04 -08:00
Vlad Yasevich 0bbe84a67b ipv6: Append sending data to arbitrary queue
Add the ability to append data to arbitrary queue.  This
will be needed later to implement lockless UDP sends.

Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-02 19:28:04 -08:00
Vlad Yasevich 366e41d977 ipv6: pull cork initialization into its own function.
Pull IPv6 cork initialization into its own function that
can be re-used.  IPv6 specific cork data did not have an
explicit data structure.  This patch creats eone so that
just ipv6 cork data can be as arguemts.  Also, since
IPv6 tries to save the flow label into inet_cork_full
tructure, pass the full cork.

Adjust ip6_cork_release() to take cork data structures.

Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-02 19:28:04 -08:00
Ian Morris e5d08d718a ipv6: coding style improvements (remove assignment in if statements)
This change has no functional impact and simply addresses some coding
style issues detected by checkpatch. Specifically this change
adjusts "if" statements which also include the assignment of a
variable.

No changes to the resultant object files result as determined by objdiff.

Signed-off-by: Ian Morris <ipm@chirality.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-23 21:00:56 -05:00
Joe Perches cbffccc970 net; ipv[46] - Remove 2 unnecessary NETDEBUG OOM messages
These messages aren't useful as there's a generic dump_stack()
on OOM.

Neaten the comment and if test above the OOM by separating the
assign in if into an allocation then if test.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-06 15:11:10 -05:00
David S. Miller 1f6d80358d Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	arch/mips/net/bpf_jit.c
	drivers/net/can/flexcan.c

Both the flexcan and MIPS bpf_jit conflicts were cases of simple
overlapping changes.

Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-23 12:09:27 -04:00
Steffen Klassert f92ee61982 xfrm: Generate blackhole routes only from route lookup functions
Currently we genarate a blackhole route route whenever we have
matching policies but can not resolve the states. Here we assume
that dst_output() is called to kill the balckholed packets.
Unfortunately this assumption is not true in all cases, so
it is possible that these packets leave the system unwanted.

We fix this by generating blackhole routes only from the
route lookup functions, here we can guarantee a call to
dst_output() afterwards.

Fixes: 2774c131b1 ("xfrm: Handle blackhole route creation via afinfo.")
Reported-by: Konstantinos Kolelis <k.kolelis@sirrix.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-09-16 10:08:40 +02:00
Florian Westphal 46cfd725c3 net: use kfree_skb_list() helper in more places
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-09 20:10:45 -07:00
Ian Morris 4c83acbc56 ipv6: White-space cleansing : gaps between function and symbol export
This patch makes no changes to the logic of the code but simply addresses
coding style issues as detected by checkpatch.

Both objdump and diff -w show no differences.

This patch removes some blank lines between the end of a function
definition and the EXPORT_SYMBOL_GPL macro in order to prevent
checkpatch warning that EXPORT_SYMBOL must immediately follow
a function.

Signed-off-by: Ian Morris <ipm@chirality.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-24 22:37:52 -07:00
Ian Morris 67ba4152e8 ipv6: White-space cleansing : Line Layouts
This patch makes no changes to the logic of the code but simply addresses
coding style issues as detected by checkpatch.

Both objdump and diff -w show no differences.

A number of items are addressed in this patch:
* Multiple spaces converted to tabs
* Spaces before tabs removed.
* Spaces in pointer typing cleansed (char *)foo etc.
* Remove space after sizeof
* Ensure spacing around comparators such as if statements.

Signed-off-by: Ian Morris <ipm@chirality.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-24 22:37:52 -07:00
Willem de Bruijn 09c2d251b7 net-timestamp: add key to disambiguate concurrent datagrams
Datagrams timestamped on transmission can coexist in the kernel stack
and be reordered in packet scheduling. When reading looped datagrams
from the socket error queue it is not always possible to unique
correlate looped data with original send() call (for application
level retransmits). Even if possible, it may be expensive and complex,
requiring packet inspection.

Introduce a data-independent ID mechanism to associate timestamps with
send calls. Pass an ID alongside the timestamp in field ee_data of
sock_extended_err.

The ID is a simple 32 bit unsigned int that is associated with the
socket and incremented on each send() call for which software tx
timestamp generation is enabled.

The feature is enabled only if SOF_TIMESTAMPING_OPT_ID is set, to
avoid changing ee_data for existing applications that expect it 0.
The counter is reset each time the flag is reenabled. Reenabling
does not change the ID of already submitted data. It is possible
to receive out of order IDs if the timestamp stream is not quiesced
first.

Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-05 16:35:54 -07:00
David S. Miller f139c74a8d Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-30 13:25:49 -07:00
Eric Dumazet 04ca6973f7 ip: make IP identifiers less predictable
In "Counting Packets Sent Between Arbitrary Internet Hosts", Jeffrey and
Jedidiah describe ways exploiting linux IP identifier generation to
infer whether two machines are exchanging packets.

With commit 73f156a6e8 ("inetpeer: get rid of ip_id_count"), we
changed IP id generation, but this does not really prevent this
side-channel technique.

This patch adds a random amount of perturbation so that IP identifiers
for a given destination [1] are no longer monotonically increasing after
an idle period.

Note that prandom_u32_max(1) returns 0, so if generator is used at most
once per jiffy, this patch inserts no hole in the ID suite and do not
increase collision probability.

This is jiffies based, so in the worst case (HZ=1000), the id can
rollover after ~65 seconds of idle time, which should be fine.

We also change the hash used in __ip_select_ident() to not only hash
on daddr, but also saddr and protocol, so that ICMP probes can not be
used to infer information for other protocols.

For IPv6, adds saddr into the hash as well, but not nexthdr.

If I ping the patched target, we can see ID are now hard to predict.

21:57:11.008086 IP (...)
    A > target: ICMP echo request, seq 1, length 64
21:57:11.010752 IP (... id 2081 ...)
    target > A: ICMP echo reply, seq 1, length 64

21:57:12.013133 IP (...)
    A > target: ICMP echo request, seq 2, length 64
21:57:12.015737 IP (... id 3039 ...)
    target > A: ICMP echo reply, seq 2, length 64

21:57:13.016580 IP (...)
    A > target: ICMP echo request, seq 3, length 64
21:57:13.019251 IP (... id 3437 ...)
    target > A: ICMP echo reply, seq 3, length 64

[1] TCP sessions uses a per flow ID generator not changed by this patch.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Jeffrey Knockel <jeffk@cs.unm.edu>
Reported-by: Jedidiah R. Crandall <crandall@cs.unm.edu>
Cc: Willy Tarreau <w@1wt.eu>
Cc: Hannes Frederic Sowa <hannes@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-28 18:46:34 -07:00
Li RongQing ac3d2e5a9e ipv6: remove obsolete comment in ip6_append_data()
After 11878b40e[net-timestamp: SOCK_RAW and PING timestamping], this comment
becomes obsolete since the codes check not only UDP socket, but also RAW sock;
and the codes are clear, not need the comments

Signed-off-by: Li RongQing <roy.qing.li@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-24 23:47:04 -07:00
Willem de Bruijn 11878b40ed net-timestamp: SOCK_RAW and PING timestamping
Add SO_TIMESTAMPING to sockets of type PF_INET[6]/SOCK_RAW:

Add the necessary sock_tx_timestamp calls to the datapath for RAW
sockets (ping sockets already had these calls).

Fix the IP output path to pass the timestamp flags on the first
fragment also for these sockets. The existing code relies on
transhdrlen != 0 to indicate a first fragment. For these sockets,
that assumption does not hold.

This fixes http://bugzilla.kernel.org/show_bug.cgi?id=77221

Tested SOCK_RAW on IPv4 and IPv6, not PING.

Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-15 16:32:45 -07:00
Himangi Saraogi e3f0b86b99 ipv6: Use BUG_ON
The semantic patch that makes this transformation is as follows:

// <smpl>
@@ expression e; @@
-if (e) BUG();
+BUG_ON(e);
// </smpl>

Signed-off-by: Himangi Saraogi <himangi774@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-11 15:06:38 -07:00
Tom Herbert cb1ce2ef38 ipv6: Implement automatic flow label generation on transmit
Automatically generate flow labels for IPv6 packets on transmit.
The flow label is computed based on skb_get_hash. The flow label will
only automatically be set when it is zero otherwise (i.e. flow label
manager hasn't set one). This supports the transmit side functionality
of RFC 6438.

Added an IPv6 sysctl auto_flowlabels to enable/disable this behavior
system wide, and added IPV6_AUTOFLOWLABEL socket option to enable this
functionality per socket.

By default, auto flowlabels are disabled to avoid possible conflicts
with flow label manager, however if this feature proves useful we
may want to enable it by default.

It should also be noted that FreeBSD has already implemented automatic
flow labels (including the sysctl and socket option). In FreeBSD,
automatic flow labels default to enabled.

Performance impact:

Running super_netperf with 200 flows for TCP_RR and UDP_RR for
IPv6. Note that in UDP case, __skb_get_hash will be called for
every packet with explains slight regression. In the TCP case
the hash is saved in the socket so there is no regression.

Automatic flow labels disabled:

  TCP_RR:
    86.53% CPU utilization
    127/195/322 90/95/99% latencies
    1.40498e+06 tps

  UDP_RR:
    90.70% CPU utilization
    118/168/243 90/95/99% latencies
    1.50309e+06 tps

Automatic flow labels enabled:

  TCP_RR:
    85.90% CPU utilization
    128/199/337 90/95/99% latencies
    1.40051e+06

  UDP_RR
    92.61% CPU utilization
    115/164/236 90/95/99% latencies
    1.4687e+06

Signed-off-by: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-07 21:14:21 -07:00
Eric Dumazet 73f156a6e8 inetpeer: get rid of ip_id_count
Ideally, we would need to generate IP ID using a per destination IP
generator.

linux kernels used inet_peer cache for this purpose, but this had a huge
cost on servers disabling MTU discovery.

1) each inet_peer struct consumes 192 bytes

2) inetpeer cache uses a binary tree of inet_peer structs,
   with a nominal size of ~66000 elements under load.

3) lookups in this tree are hitting a lot of cache lines, as tree depth
   is about 20.

4) If server deals with many tcp flows, we have a high probability of
   not finding the inet_peer, allocating a fresh one, inserting it in
   the tree with same initial ip_id_count, (cf secure_ip_id())

5) We garbage collect inet_peer aggressively.

IP ID generation do not have to be 'perfect'

Goal is trying to avoid duplicates in a short period of time,
so that reassembly units have a chance to complete reassembly of
fragments belonging to one message before receiving other fragments
with a recycled ID.

We simply use an array of generators, and a Jenkin hash using the dst IP
as a key.

ipv6_select_ident() is put back into net/ipv6/ip6_output.c where it
belongs (it is only used from this file)

secure_ip_id() and secure_ipv6_id() no longer are needed.

Rename ip_select_ident_more() to ip_select_ident_segs() to avoid
unnecessary decrement/increment of the number of segments.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-02 11:00:41 -07:00
David S. Miller 54e5c4def0 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	drivers/net/bonding/bond_alb.c
	drivers/net/ethernet/altera/altera_msgdma.c
	drivers/net/ethernet/altera/altera_sgdma.c
	net/ipv6/xfrm6_output.c

Several cases of overlapping changes.

The xfrm6_output.c has a bug fix which overlaps the renaming
of skb->local_df to skb->ignore_df.

In the Altera TSE driver cases, the register access cleanups
in net-next overlapped with bug fixes done in net.

Similarly a bug fix to send ALB packets in the bonding driver using
the right source address overlaps with cleanups in net-next.

Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-24 00:32:30 -04:00
Hannes Frederic Sowa 3a1cebe7e0 ipv6: fix calculation of option len in ip6_append_data
tot_len does specify the size of struct ipv6_txoptions. We need opt_flen +
opt_nflen to calculate the overall length of additional ipv6 extensions.

I found this while auditing the ipv6 output path for a memory corruption
reported by Alexey Preobrazhensky while he fuzzed an instrumented
AddressSanitizer kernel with trinity. This may or may not be the cause
of the original bug.

Fixes: 4df98e76cd ("ipv6: pmtudisc setting not respected with UFO/CORK")
Reported-by: Alexey Preobrazhensky <preobr@google.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-14 00:40:27 -04:00
WANG Cong 60ff746739 net: rename local_df to ignore_df
As suggested by several people, rename local_df to ignore_df,
since it means "ignore df bit if it is set".

Cc: Maciej Żenczykowski <maze@google.com>
Cc: Florian Westphal <fw@strlen.de>
Cc: David S. Miller <davem@davemloft.net>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-12 14:03:41 -04:00
Florian Westphal 418a31561d net: ipv6: send pkttoobig immediately if orig frag size > mtu
If conntrack defragments incoming ipv6 frags it stores largest original
frag size in ip6cb and sets ->local_df.

We must thus first test the largest original frag size vs. mtu, and not
vice versa.

Without this patch PKTTOOBIG is still generated in ip6_fragment() later
in the stack, but

1) IPSTATS_MIB_INTOOBIGERRORS won't increment
2) packet did (needlessly) traverse netfilter postrouting hook.

Fixes: fe6cc55f3a ("net: ip, ipv6: handle gso skbs in forwarding path")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-07 15:27:59 -04:00
Eric Dumazet aad88724c9 ipv4: add a sock pointer to dst->output() path.
In the dst->output() path for ipv4, the code assumes the skb it has to
transmit is attached to an inet socket, specifically via
ip_mc_output() : The sk_mc_loop() test triggers a WARN_ON() when the
provider of the packet is an AF_PACKET socket.

The dst->output() method gets an additional 'struct sock *sk'
parameter. This needs a cascade of changes so that this parameter can
be propagated from vxlan to final consumer.

Fixes: 8f646c922d ("vxlan: keep original skb ownership")
Reported-by: lucien xin <lucien.xin@gmail.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-15 13:47:15 -04:00
Hannes Frederic Sowa 43a43b6040 ipv6: some ipv6 statistic counters failed to disable bh
After commit c15b1ccadb ("ipv6: move DAD and addrconf_verify
processing to workqueue") some counters are now updated in process context
and thus need to disable bh before doing so, otherwise deadlocks can
happen on 32-bit archs. Fabio Estevam noticed this while while mounting
a NFS volume on an ARM board.

As a compensation for missing this I looked after the other *_STATS_BH
and found three other calls which need updating:

1) icmp6_send: ip6_fragment -> icmpv6_send -> icmp6_send (error handling)
2) ip6_push_pending_frames: rawv6_sendmsg -> rawv6_push_pending_frames -> ...
   (only in case of icmp protocol with raw sockets in error handling)
3) ping6_v6_sendmsg (error handling)

Fixes: c15b1ccadb ("ipv6: move DAD and addrconf_verify processing to workqueue")
Reported-by: Fabio Estevam <festevam@gmail.com>
Tested-by: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-31 16:38:12 -04:00
David S. Miller 04f58c8854 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	Documentation/devicetree/bindings/net/micrel-ks8851.txt
	net/core/netpoll.c

The net/core/netpoll.c conflict is a bug fix in 'net' happening
to code which is completely removed in 'net-next'.

In micrel-ks8851.txt we simply have overlapping changes.

Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-25 20:29:20 -04:00
lucien e367c2d03d ipv6: ip6_append_data_mtu do not handle the mtu of the second fragment properly
In ip6_append_data_mtu(), when the xfrm mode is not tunnel(such as
transport),the ipsec header need to be added in the first fragment, so the mtu
will decrease to reserve space for it, then the second fragment come, the mtu
should be turn back, as the commit 0c1833797a
said.  however, in the commit a493e60ac4bbe2e977e7129d6d8cbb0dd236be, it use
*mtu = min(*mtu, ...) to change the mtu, which lead to the new mtu is alway
equal with the first fragment's. and cannot turn back.

when I test through  ping6 -c1 -s5000 $ip (mtu=1280):
...frag (0|1232) ESP(spi=0x00002000,seq=0xb), length 1232
...frag (1232|1216)
...frag (2448|1216)
...frag (3664|1216)
...frag (4880|164)

which should be:
...frag (0|1232) ESP(spi=0x00001000,seq=0x1), length 1232
...frag (1232|1232)
...frag (2464|1232)
...frag (3696|1232)
...frag (4928|116)

so delete the min() when change back the mtu.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Fixes: 75a493e60a ("ipv6: ip6_append_data_mtu did not care about pmtudisc and frag_size")
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-18 15:17:53 -04:00
Li RongQing 090f1166c6 ipv6: ip6_forward: perform skb->pkt_type check at the beginning
Packets which have L2 address different from ours should be
already filtered before entering into ip6_forward().

Perform that check at the beginning to avoid processing such packets.

Signed-off-by: Li RongQing <roy.qing.li@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-11 00:37:42 -04:00
David S. Miller 67ddc87f16 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	drivers/net/wireless/ath/ath9k/recv.c
	drivers/net/wireless/mwifiex/pcie.c
	net/ipv6/sit.c

The SIT driver conflict consists of a bug fix being done by hand
in 'net' (missing u64_stats_init()) whilst in 'net-next' a helper
was created (netdev_alloc_pcpu_stats()) which takes care of this.

The two wireless conflicts were overlapping changes.

Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-05 20:32:02 -05:00
Hannes Frederic Sowa 0b95227a7b ipv6: yet another new IPV6_MTU_DISCOVER option IPV6_PMTUDISC_OMIT
This option has the same semantic as IP_PMTUDISC_OMIT for IPv4 which
got recently introduced. It doesn't honor the path mtu discovered by the
host but in contrary to IPV6_PMTUDISC_INTERFACE allows the generation of
fragments if the packet size exceeds the MTU of the outgoing interface
MTU.

Fixes: 93b36cf342 ("ipv6: support IPV6_PMTU_INTERFACE on sockets")
Cc: Florian Weimer <fweimer@redhat.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-26 15:51:01 -05:00
David S. Miller 2e99c07fbe Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf
Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains Netfilter fixes for your net tree,
they are:

* Fix nf_trace in nftables if XT_TRACE=n, from Florian Westphal.

* Don't use the fast payload operation in nf_tables if the length is
  not power of 2 or it is not aligned, from Nikolay Aleksandrov.

* Fix missing break statement the inet flavour of nft_reject, which
  results in evaluating IPv4 packets with the IPv6 evaluation routine,
  from Patrick McHardy.

* Fix wrong kconfig symbol in nft_meta to match the routing realm,
  from Paul Bolle.

* Allocate the NAT null binding when creating new conntracks via
  ctnetlink to avoid that several packets race at initializing the
  the conntrack NAT extension, original patch from Florian Westphal,
  revisited version from me.

* Fix DNAT handling in the snmp NAT helper, the same handling was being
  done for SNAT and DNAT and 2.4 already contains that fix, from
  Francois-Xavier Le Bail.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19 13:12:53 -05:00
Florian Westphal 478b360a47 netfilter: nf_tables: fix nf_trace always-on with XT_TRACE=n
When using nftables with CONFIG_NETFILTER_XT_TARGET_TRACE=n, we get
lots of "TRACE: filter:output:policy:1 IN=..." warnings as several
places will leave skb->nf_trace uninitialised.

Unlike iptables tracing functionality is not conditional in nftables,
so always copy/zero nf_trace setting when nftables is enabled.

Move this into __nf_copy() helper.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2014-02-17 11:20:12 +01:00
Florian Westphal fe6cc55f3a net: ip, ipv6: handle gso skbs in forwarding path
Marcelo Ricardo Leitner reported problems when the forwarding link path
has a lower mtu than the incoming one if the inbound interface supports GRO.

Given:
Host <mtu1500> R1 <mtu1200> R2

Host sends tcp stream which is routed via R1 and R2.  R1 performs GRO.

In this case, the kernel will fail to send ICMP fragmentation needed
messages (or pkt too big for ipv6), as GSO packets currently bypass dstmtu
checks in forward path. Instead, Linux tries to send out packets exceeding
the mtu.

When locking route MTU on Host (i.e., no ipv4 DF bit set), R1 does
not fragment the packets when forwarding, and again tries to send out
packets exceeding R1-R2 link mtu.

This alters the forwarding dstmtu checks to take the individual gso
segment lengths into account.

For ipv6, we send out pkt too big error for gso if the individual
segments are too big.

For ipv4, we either send icmp fragmentation needed, or, if the DF bit
is not set, perform software segmentation and let the output path
create fragments when the packet is leaving the machine.
It is not 100% correct as the error message will contain the headers of
the GRO skb instead of the original/segmented one, but it seems to
work fine in my (limited) tests.

Eric Dumazet suggested to simply shrink mss via ->gso_size to avoid
sofware segmentation.

However it turns out that skb_segment() assumes skb nr_frags is related
to mss size so we would BUG there.  I don't want to mess with it considering
Herbert and Eric disagree on what the correct behavior should be.

Hannes Frederic Sowa notes that when we would shrink gso_size
skb_segment would then also need to deal with the case where
SKB_MAX_FRAGS would be exceeded.

This uses sofware segmentation in the forward path when we hit ipv4
non-DF packets and the outgoing link mtu is too small.  Its not perfect,
but given the lack of bug reports wrt. GRO fwd being broken this is a
rare case anyway.  Also its not like this could not be improved later
once the dust settles.

Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Reported-by: Marcelo Ricardo Leitner <mleitner@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-13 17:17:02 -05:00