Commit Graph

39 Commits

Author SHA1 Message Date
Ben Dooks 93bc6b6371 [ARM] S3C24XX: Split DCLK/CLKOUT definitions out of clock.c
Only certain boards need these clocks, and they are not
available on some CPUs (such as the S3C24A0) so remove
them from arch/arm/plat-s3c24xx/clock.c and into their
own file with appropriate Kconfig entries.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 21:46:00 +00:00
Ben Dooks 1b3ba68884 [ARM] S3C2410: Move base clock code to plat-s3c24xx
Move the S3C2410 base clock list to arch/arm/plat-s3c24xx
as this code is common to the S3C2410, S3C2440 and S3C2442
cpus.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 21:45:47 +00:00
Russell King c750815e2d [ARM] Arrange for platforms to select appropriate CPU support
Rather than:

	config CPU_BLAH
		bool
		depends on ARCH_FOO || MACH_BAR
		default y if ARCH_FOO || MACH_BAR

arrange for ARCH_FOO and MACH_BAR to select CPU_BLAH directly.

Acked-by: Nicolas Pitre <nico@marvell.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Acked-by: Brian Swetland <swetland@google.com>
Acked-by: Eric Miao <eric.miao@marvell.com>
Acked-by: Nicolas Bellido <ml@acolin.be>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-11-27 12:38:00 +00:00
Christer Weinigel 9579087331 [ARM] Acer n30: Add support for n35 and related devices.
Add support for the Acer N35 and related devices.

Signed-off-by: Christer Weinigel <christer@weinigel.se>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-07-07 18:13:04 +01:00
Ben Dooks 9d529c6e7b [ARM] S3C24XX: Add physmap device for all Simtec NOR equiped boards.
Move to using the physmap platform device code to attached NOR
flash on Simtec boards so that the old bast-flash driver can be
safely removed.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-07-03 16:51:28 +01:00
Ben Dooks b7a12d1923 [ARM] BAST/VR1000: Move to using ata_platform (libata)
Use the pata_platform driver to provide the IDE port
drivers on the Simntec BAST and Thorcom VR1000 machines
as a precursor to removing drivers/ide/arm/bast-ide.c

This will mean that the system will need SCSI and SCSI disc
support as a minimum, and any references to hdX will be
changed to sdX.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-07-03 16:51:27 +01:00
David Anders 79b34afa68 [ARM] 4963/1: S3C2410 - add basic machine support for the TCT Hammer
Add the TinCanTools Hammer board to list of supported machines in the
arch/arm/mach-s3c2410 directory, as well as a default config entry. the
mach-tct_hammer.c file initializes basic i/o, clocks, irqs, as well as
the mtd flash layout if enabled in the kernel configuration.

Signed-off-by: David Anders <danders@amltd.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-17 17:34:56 +01:00
Ben Dooks b2627588cb [ARM] 4511/1: S3C: updated LLSERIAL Kconfig defines for CPU support
Update the Kconfig to create configuration options based on which
CPUs are supported for the low level serial code. This means that
the debug macros can be optimised for the type(s) of CPU that are
being used.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-22 16:44:28 +01:00
Ben Dooks c6184e271d [ARM] 4214/2: S3C2410: Add Armzone QT2410
Patch from: Harald Welte <laforge@openmoko.org>

Add support for the Armzone QT2410 system, with
basic peripheral support for TFT display, SPI
and LEDs.

Signed-off-by: Harald Welte <laforge@openmoko.org>
Signed-off-by: Ben Dooks <ben-linux@fluf.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-17 11:17:42 +00:00
Ben Dooks a21765a70e [ARM] 4157/2: S3C24XX: move arch/arch/mach-s3c2410 into cpu components
The following patch and script moves the arch/arm/mach-s3c2410
directory into arch/arm/plat-s3c24xx for the generic core code
and inti arch/arm/mach-s3c{cpu} for the cpu/machine support files

Include directory include/asm-arm/plat-s3c24xx is added for the
core include files.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-11 17:36:09 +00:00
Ben Dooks d19494b187 [ARM] 4156/1: S3C24XX: Add CONFIG_S3C2410_GPIO
In preperation for splitting the arch-s3c2410 directory
up, add a CONFIG_S3C2410_GPIO instead of implicitly
making the .o for CONFIG_CPU_S3C2410 and CONFIG_CPU_S3C2440

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-11 16:54:33 +00:00
Ben Dooks 4c784ef76a [ARM] 4155/1: S3C24XX: remove obj-dma-* from Makefile
In preperation for splitting the arch-s3c2410 directory
up, remove the use of obj-dma-y in the Makefile and move
to using CONFIG_S3C2440_DMA, CONFIG_S3C2412_DMA, etc.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-11 16:54:32 +00:00
Ben Dooks 618b20a13e [ARM] 4062/1: S3C24XX: Anubis and Osiris shuld have CONFIG_PM_SIMTEC
Both CONFIG_MACH_OSIRIS and CONFIG_MACH_ANUBIS
should select CONFIG_PM_SIMTEC.

This patch moves the selection of CONFIG_PM_SIMTEC
to the machines that require it, as currently done
with other machines in the S3C2410 architecture.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-19 22:54:53 +00:00
Ben Dooks 9bcb533c13 [ARM] 4052/1: S3C24XX: Fix PM in arch/arm/mach-s3c2410/Kconfig
Fix up the CONFIG_PM mixups in arch/arm/mach-s3c2410/Kconfig
causing CONFIG_S3C2410_PM and CONFIG_PM_H1940 to get enabled
permanently.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-18 00:14:53 +00:00
Linus Torvalds ea14fad0d4 Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (76 commits)
  [ARM] 4002/1: S3C24XX: leave parent IRQs unmasked
  [ARM] 4001/1: S3C24XX: shorten reboot time
  [ARM] 3983/2: remove unused argument to __bug()
  [ARM] 4000/1: Osiris: add third serial port in
  [ARM] 3999/1: RX3715: suspend to RAM support
  [ARM] 3998/1: VR1000: LED platform devices
  [ARM] 3995/1: iop13xx: add iop13xx support
  [ARM] 3968/1: iop13xx: add iop13xx_defconfig
  [ARM] Update mach-types
  [ARM] Allow gcc to optimise arm_add_memory a little more
  [ARM] 3991/1: i.MX/MX1 high resolution time source
  [ARM] 3990/1: i.MX/MX1 more precise PLL decode
  [ARM] 3986/1: H1940: suspend to RAM support
  [ARM] 3985/1: ixp4xx clocksource cleanup
  [ARM] 3984/1: ixp4xx/nslu2: Fix disk LED numbering (take 2)
  [ARM] 3994/1: ixp23xx: fix handling of pci master aborts
  [ARM] 3981/1: sched_clock for PXA2xx
  [ARM] 3980/1: extend the ARM Versatile sched_clock implementation from 32 to 63 bit
  [ARM] 3979/1: extend the SA11x0 sched_clock implementation from 32 to 63 bit period
  [ARM] 3978/1: macro to provide a 63-bit value from a 32-bit hardware counter
  ...
2006-12-07 15:40:39 -08:00
Ben Dooks bbf6f2809d [ARM] 3999/1: RX3715: suspend to RAM support
The RX3715 is similar to the H1940 in the way
that suspend to RAM works, so we can use most
of the extant support for the H1940 with only
a few modifictions

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-07 22:37:44 +00:00
Matt LaPlante 3cb2fccc5f Fix misc Kconfig typos
Fix various Kconfig typos.

Signed-off-by: Matt LaPlante <kernel1@cyberdogtech.com>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-11-30 05:22:59 +01:00
Matt LaPlante cab00891c5 Still more typo fixes
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-10-03 22:36:44 +02:00
David Anders 26f908186f [ARM] 3862/2: S3C2410 - add basic power management support for AML M5900 series
this patch registers the wakeup irq, sets a gpio pin to indicate the
status of system for suspend/resume operations, and adds the machine to
the supported machines for use with the simtec-pm

Signed-off-by: David Anders <danders@amltd.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-27 23:44:33 +01:00
Ben Dooks 4b053e7a32 [ARM] 3858/1: S3C2412: power management code
Add S3C2412 power management code, and move the
core register saving in from s3c2412.c

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-27 09:35:04 +01:00
David Anders da56c94926 [ARM] 3854/2: S3C2410 - add machine type for AML M5900 series (resubmitted)
Add the AML M5900 series to the list of supported machines in the
arch/arm/mach-s3c2410 directory. This ensures the core peripherals
are registered, and the timer source is configured. if selected in
the kernel config the framebuffer registers and mtd partition
information are set.  This version of the patch has corrected
formatting and removed the legacy procfs directory entry.

Signed-off-by: David Anders <danders@amltd.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-27 09:35:03 +01:00
Ben Dooks b6c440a98e [ARM] 3840/1: S3C2412: Add machine VSTMS
Add new machine VSTMS

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Thomas Gleixner <tglx@linuxtronix.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25 10:33:54 +01:00
Ben Dooks 0033a2f0d0 [ARM] 3803/2: S3C24XX: PM split S3C2410 out of core pm
Remove the S3C2410 specific items out of the
core PM code. Add sysdev driver for all the
S3C24XX series that used the S3C2410 PM code.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25 10:25:30 +01:00
Ben Dooks 3fc3a25ba4 [ARM] 3799/1: S3C2442: DMA channel mappings
DMA channel mappings for the S3C2442

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25 10:25:19 +01:00
Ben Dooks a55ee0ea51 [ARM] 3784/1: S3C2413: fix config for MACH_S3C2413/MACH_SMDK2413
Patch from Ben Dooks

These two machines are identical, and supported
by the SMDK2413 configuration. When MACH_SMDK2413
is selected, we must also select MACH_S3C2413
to allow machine_is_smdk2413() or machine_is_s3c2413()
to work.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-14 13:29:13 +01:00
Ben Dooks 52c5ceceb1 [ARM] 3649/1: S3C24XX: Fix capitalisation of CPU on SMDK2440
Patch from Ben Dooks

Make CPU uppercase on the SMDK2440 KConfig entries--

Signed-off-by: Ben Dooks <ben-linux@fluff.org>Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-26 15:12:56 +01:00
Ben Dooks 66c594098d [ARM] 3642/1: S3C24XX: Add machine SMDK2413
Patch from Ben Dooks

Add basic support for the Samsung/Aiji SMDK2413

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-24 21:21:35 +01:00
Ben Dooks 68d9ab394f [ARM] 3635/1: S3C24XX: Add S3C2412 core cpu support
Patch from Ben Dooks

Add support for the Samsung S3C2412 and S3C2413 range
of SoCs. This patch contains the core identification,
debug macros, and basic register updates to get these
to build.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-24 21:21:27 +01:00
Ben Dooks 99c13853ff [ARM] 3627/1: S3C24XX: split s3c2410 clocks from core clocks
Patch from Ben Dooks

Split the s3c2410 specific clocks from the core
clock code, as part of the work to support more
of the Samsung line of SoCs.

The patch does not use the sysdev mechanism as
the clocks are needed for the timer init, which
is very early in the kernel init sequence.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-22 22:18:20 +01:00
Ben Dooks 96ce2385dd [ARM] 3559/1: S3C2442: core and serial port
Patch from Ben Dooks

Core support for the Samsung S3C2442, and the
serial port driver update to allow the serial
port blocks to be used.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-18 23:06:41 +01:00
Egry Gabor c41045a43a [ARM] Trivial typo fixes
Trivial typo fixes in Kconfig files (ARM).

Signed-off-by: Egry Gabor <gaboregry@t-online.hu>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-04 21:22:11 +01:00
Ben Dooks d3f4c571b6 [ARM] 3440/1: [S3C2410] make SMDK2410 and SMDK2440 similarities common
Patch from Ben Dooks

The SMDK2410 and SMDK2440 boards have a number of items
in common, including the LEDs, Ethernet, PCMCIA. Make
a common SMDK support file.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-04-01 18:33:42 +01:00
Ben Dooks 110d322b29 [ARM] 3327/1: S3C2410 - add osiris machine support
Patch from Ben Dooks

Support for Simtec IM2440D20 CPU modules (Osiris)

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-21 22:06:00 +00:00
Ben Dooks f8c905d368 [ARM] 3132/1: S3C2410 - reset on decompression error
Patch from Ben Dooks

Force a watchdog reset if the system fails to
decompress properly.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-08 22:43:05 +00:00
Ben Dooks 50688ea9ed [ARM] 3007/1: BAST - add CONFIG_ISA to build
Patch from Ben Dooks

The Simtec EB2410ITX (BAST) has a PC/104 slot, and
therefore we should enable CONFIG_ISA to allow the
drivers for ISA peripherals to be selected

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-13 22:04:36 +01:00
Ben Dooks bafa49cc1b [ARM] 2884/1: BAST - fix PC104 IRQ routing
Patch from Ben Dooks

This has been broken for a while now, so fix the
problems with the code, test and bring up to date.
This also makes the code conditional on an
Kconfig option

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-07 17:24:48 +01:00
Ben Dooks 7efb833d64 [ARM] 2889/1: S3C2410 - Add machine Anubis
Patch from Ben Dooks

Add the Simtec Anubis to the list of supported
machines in the arch/arm/mach-s3c2410 directory.
This ensures the core peripherals are registered,
the timer source is configured and the correct
power-management is enabled.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-07 11:49:23 +01:00
Ben Dooks f705b1aed7 [PATCH] ARM: 2764/1: S3C24XX - Common PM functions for Simtec boards
Patch from Ben Dooks

All current S3C24XX implementations from Simtec share the same
requirements for suspend/resume information.
This patch moves the save code out of the mach-bast.c file,
and into it's own so it can be shared by all the current
Simtec S3C24XX implementations.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-06-29 11:09:15 +01:00
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00