Remove the smp-mt IPI code that supported single-core multithreaded
systems and instead make use of the IPI IRQ domain support provided by
the MIPS CPU interrupt controller driver. This removes some less than
nice code, the horrible split between arch & board code and the
duplication that led to within board code.
The lantiq portion of this patch has only been compile tested. Malta has
been tested & is functional.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/15837/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Introduce support for registering an IPI IRQ domain suitable for use by
systems using the MIPS MT (multithreading) ASE within a single core.
This will allow for such systems to be supported generically, without
the current kludge of IPI code split between the MIPS arch & the malta
board support code.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/15836/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
The various struct irq_chip callbacks in the MIPS CPU interrupt
controller driver have been calculating the hardware interrupt number by
subtracting MIPS_CPU_IRQ_BASE from the virq number. This presumes a
linear mapping beginning from MIPS_CPU_IRQ_BASE, and this will not hold
once an IPI IRQ domain is introduced. Switch to using the hwirq field of
struct irq_data which already contains the hardware interrupt number
instead of attempting to calculate it.
Similarly, plat_irq_dispatch calculated the virq number by adding
MIPS_CPU_IRQ_BASE to the hardware interrupt number. Ready this for the
introduction of an IPI IRQ domain by instead using irq_linear_revmap.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/15835/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Replace use of the magic number 0x100 (ie. bit 8) with the more
explanatory IE_SW0 (ie. interrupt enable for software interrupt 0) or
C_SW0 (ie. cause bit for software interrupt 0) as appropriate.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/15834/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
We declare CONFIG_ARCH_HAS_ILOG2_U32 & CONFIG_ARCH_HAS_ILOG2_U64 in
Kconfig, but they are always false since nothing ever selects them. The
generic fls-based implementation is efficient for MIPS anyway. Remove
the redundant Kconfig entries.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: trivial@kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/15840/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
The generic_defconfig is used for platforms like SEAD3 which do not
usually have fixed storage available, therefore NFS is the preferred
location of the RFS.
When the upstream kernel defconfig is built & tested on platforms such
as SEAD3 this leads to essentially false failures when the RFS fails to
mount.
There is little harm in having this feature enabled by default, so
enable it in the defconfig. Kernel autoconfiguration & DHCP must also be
selected to allow RFS on NFS.
Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/15853/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
cpu-feautre-overrides.h in mach-rm unnecessarily includes itself, so
drop the pointless include
Signed-off-by: Marcin Nowakowski <marcin.nowakowski@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/15462/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
This the mips version of commit c1bd55f922 ("x86: opt into
HAVE_COPY_THREAD_TLS, for both 32-bit and 64-bit").
Simply use the tls system call argument instead of extracting the tls
argument by magic from the pt_regs structure.
See commit 3033f14ab7 ("clone: support passing tls argument via C
rather than pt_regs magic") for more background.
Signed-off-by: James Cowgill <James.Cowgill@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/15855/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
It is pure mystery to me why we need to be on a specific CPU while
looking up a value in an array.
My best shot at this is that before commit d4019f0a92 ("cpufreq: move
freq change notifications to cpufreq core") it was required to invoke
cpufreq_notify_transition() on a special CPU.
Since it looks like a waste, remove it.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: tglx@linutronix.de
Cc: linux-pm@vger.kernel.org
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/15888/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
We always either target MIPS32/MIPS64 or microMIPS, and always include
one & only one of uasm-mips.c or uasm-micromips.c. Therefore the
abstraction of the ISA in asm/uasm.h declaring functions for either ISA
is redundant & needless. Remove it to simplify the code.
This is largely the result of the following:
:%s/ISAOPC(\(.\{-}\))/uasm_i##\1/
:%s/ISAFUNC(\(.\{-}\))/\1/
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: Paul Burton <paul.burton@imgtec.com>
Patchwork: https://patchwork.linux-mips.org/patch/15844/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Correct the treatment of branching conditions for BC1EQZ and BC1NEZ
instructions in function isBranchInstr().
Previously, corresponding conditions were swapped, which in turn meant
that, for these two instructions, function isBranchInstr() returned
wrong value in its output parameter contpc.
This change is actually an extension of the fix done by the commit
93583e178e ("MIPS: math-emu: Fix BC1{EQ,NE}Z emulation"). That commit
dealt with a similar problem in function cop1Emulate(), while this
commit deals with condition handling in function isBranchInstr().
The code styles of changes in these two commits are kept as
consistent as possible.
Signed-off-by: Douglas Leung <douglas.leung@imgtec.com>
Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Reviewed-by: Paul Burton <paul.burton@imgtec.com>
Cc: james.hogan@imgtec.com
Cc: leonid.yegoshin@imgtec.com
Cc: petar.jovanovic@imgtec.com
Cc: goran.ferenc@imgtec.com
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/15489/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Add missing clearing of BLTZALL and BGEZALL emulation counters in
function mipsr2_stats_clear_show().
Previously, it was not possible to reset BLTZALL and BGEZALL
emulation counters - their value remained the same even after
explicit request via debugfs. As far as other related counters
are concerned, they all seem to be properly cleared.
This change affects debugfs operation only, core R2 emulation
functionality is not affected.
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Reviewed-by: Paul Burton <paul.burton@imgtec.com>
Cc: james.hogan@imgtec.com
Cc: leonid.yegoshin@imgtec.com
Cc: douglas.leung@imgtec.com
Cc: petar.jovanovic@imgtec.com
Cc: miodrag.dinic@imgtec.com
Cc: goran.ferenc@imgtec.com
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/15517/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Fix the problem of inaccurate identification of instructions BLEZL and
BGTZL in R2 emulation code by making sure all necessary encoding
specifications are met.
Previously, certain R6 instructions could be identified as BLEZL or
BGTZL. R2 emulation routine didn't take into account that both BLEZL
and BGTZL instructions require their rt field (bits 20 to 16 of
instruction encoding) to be 0, and that, at same time, if the value in
that field is not 0, the encoding may represent a legitimate MIPS R6
instruction.
This means that a problem could occur after emulation optimization,
when emulation routine tried to pipeline emulation, picked up a next
candidate, and subsequently misrecognized an R6 instruction as BLEZL
or BGTZL.
It should be said that for single pass strategy, the problem does not
happen because CPU doesn't trap on branch-compacts which share opcode
space with BLEZL/BGTZL (but have rt field != 0, of course).
Signed-off-by: Leonid Yegoshin <leonid.yegoshin@imgtec.com>
Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtech.com>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtech.com>
Reported-by: Douglas Leung <douglas.leung@imgtec.com>
Reviewed-by: Paul Burton <paul.burton@imgtec.com>
Cc: james.hogan@imgtec.com
Cc: petar.jovanovic@imgtec.com
Cc: goran.ferenc@imgtec.com
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/15456/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
<linux/cache.h> already defines SMP_CACHE_BYTES as L1_CACHE_BYTES.
This change results in a build error in <asm/cpu-info.h> which directly
includes <asm/cache.h>. Fix this by including <linux/cache.h> instead.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Remove unused headers and fix warnings from checkpatch.
Signed-off-by: Steven J. Hill <Steven.Hill@cavium.com>
Acked-by: David Daney <david.daney@cavium.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/15407/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Remove all unused bitfields and macros. Convert the remaining
bitfields to use __BITFIELD_FIELD instead of #ifdef.
[ralf@linux-mips.org: Add inclusions of <uapi/asm/bitfield.h> as necessary.]
Signed-off-by: Steven J. Hill <steven.hill@cavium.com>
Acked-by: David Daney <david.daney@cavium.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/15408/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Move all USB platform code to one place within the file.
Signed-off-by: Steven J. Hill <Steven.Hill@cavium.com>
Acked-by: David Daney <david.daney@cavium.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/15406/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Remove all unused bitfields and macros. Convert the remaining
bitfields to use __BITFIELD_FIELD instead of #ifdef.
[ralf@linux-mips.org: Add inclusions of <uapi/asm/bitfield.h> as necessary.]
Signed-off-by: Steven J. Hill <steven.hill@cavium.com>
Acked-by: David Daney <david.daney@cavium.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/15405/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Remove all unused bitfields and macros. Convert the remaining
bitfields to use __BITFIELD_FIELD instead of #ifdef.
[ralf@linux-mips.org: Add inclusions of <uapi/asm/bitfield.h> as necessary.]
Signed-off-by: Steven J. Hill <steven.hill@cavium.com>
Acked-by: David Daney <david.daney@cavium.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/15403/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Some users must have 4K pages while needing a 48-bit VA space size.
The cleanest way do do this is to go to a 4-level page table for this
case. Each page table level using order-0 pages adds 9 bits to the
VA size (at 4K pages, so for four levels we get 9 * 4 + 12 == 48-bits.
For the 4K page size case only we add support functions for the PUD
level of the page table tree, also the TLB exception handlers get an
extra level of tree walk.
[david.daney@cavium.com: Forward port to v4.10.]
[david.daney@cavium.com: Forward port to v4.11.]
Signed-off-by: Alex Belits <alex.belits@cavium.com>
Signed-off-by: David Daney <david.daney@cavium.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Alex Belits <alex.belits@cavium.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/15312/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
This config option never really worked, and has bit-rotted to the
point of being completely useless. Remove it completely.
Signed-off-by: David Daney <david.daney@cavium.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Steven J. Hill <steven.hill@cavium.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/15314/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
o Socket data is unsigned, so use unsigned accessors instructions.
o Fix path result pointer generation arithmetic.
o Fix half-word byte swapping code for unsigned semantics.
Signed-off-by: David Daney <david.daney@cavium.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Steven J. Hill <steven.hill@cavium.com>
Cc: linux-mips@linux-mips.org
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/15747/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
If bpf_needs_clear_a() returns true, only actually clear it if it is
ever used. If it is not used, we don't save and restore it, so the
clearing has the nasty side effect of clobbering caller state.
Also, don't emit stack pointer adjustment instructions if the
adjustment amount is zero.
Signed-off-by: David Daney <david.daney@cavium.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Steven J. Hill <steven.hill@cavium.com>
Cc: linux-mips@linux-mips.org
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/15745/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
The SKB vlan_tci and queue_mapping fields are unsigned, don't sign
extend these in the BPF JIT. In the vlan_tci case, the value gets
masked so the change is not needed for correctness, but do it anyway
for agreement with the types defined in struct sk_buff.
Signed-off-by: David Daney <david.daney@cavium.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Steven J. Hill <steven.hill@cavium.com>
Cc: linux-mips@linux-mips.org
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/15746/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
This let's us pass some additional "modprobe test-bpf" tests with JIT
enabled.
Reuse the code for SKF_AD_IFINDEX, but substitute the offset and size
of the "type" field.
Signed-off-by: David Daney <david.daney@cavium.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Steven J. Hill <steven.hill@cavium.com>
Cc: linux-mips@linux-mips.org
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/15744/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Add missing macros and methods that are required by
CONFIG_GENERIC_CPU_AUTOPROBE: MAX_CPU_FEATURES, cpu_have_feature(),
cpu_feature().
Also set a default elf platform as currently it is not set for most MIPS
platforms resulting in incorrectly specified modalias values in cpu
autoprobe ("cpu:type:(null):feature:...").
Export 'elf_hwcap' symbol so that it can be accessed from modules that
use module_cpu_feature_match()
Signed-off-by: Marcin Nowakowski <marcin.nowakowski@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/15395/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Pull CIFS fixes from Steve French:
"This is a set of CIFS/SMB3 fixes for stable.
There is another set of four SMB3 reconnect fixes for stable in
progress but they are still being reviewed/tested, so didn't want to
wait any longer to send these five below"
* 'for-next' of git://git.samba.org/sfrench/cifs-2.6:
Reset TreeId to zero on SMB2 TREE_CONNECT
CIFS: Fix build failure with smb2
Introduce cifs_copy_file_range()
SMB3: Rename clone_range to copychunk_range
Handle mismatched open calls
Pull ARM fixes from Russell King:
"A number of ARM fixes:
- prevent oopses caused by dma_get_sgtable() and declared DMA
coherent memory
- fix boot failure on nommu caused by ID_PFR1 access
- a number of kprobes fixes from Jon Medhurst and Masami Hiramatsu"
* 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 8665/1: nommu: access ID_PFR1 only if CPUID scheme
ARM: dma-mapping: disallow dma_get_sgtable() for non-kernel managed memory
arm: kprobes: Align stack to 8-bytes in test code
arm: kprobes: Fix the return address of multiple kretprobes
arm: kprobes: Skip single-stepping in recursing path if possible
arm: kprobes: Allow to handle reentered kprobe on single-stepping
Here are 3 small fixes for 4.11-rc6. One resolves a reported issue with
sysfs files that NeilBrown found, one is a documenatation fix for the
stable kernel rules, and the last is a small MAINTAINERS file update for
kernfs.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWOnrMw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yk/JQCfQKjOpGDAR9Hs6u4YQ4hJrAHFneYAn1F4MLDW
3b0ZMnlZHkDq834UwKnB
=iiei
-----END PGP SIGNATURE-----
Merge tag 'driver-core-4.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are 3 small fixes for 4.11-rc6.
One resolves a reported issue with sysfs files that NeilBrown found,
one is a documenatation fix for the stable kernel rules, and the last
is a small MAINTAINERS file update for kernfs"
* tag 'driver-core-4.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
MAINTAINERS: separate out kernfs maintainership
sysfs: be careful of error returns from ops->show()
Documentation: stable-kernel-rules: fix stable-tag format
Here are a number of small IIO and staging driver fixes for 4.11-rc6.
Nothing big here, just iio fixes for reported issues, and an ashmem fix
for a very old bug that has been reported by a number of Android
vendors.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWOnsZA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymb4ACfSnGU4ndDTKoyTaJ7B/ZO/RF5lZUAni9d3kYF
3Ztp0ssmF8PBNvQhyIs0
=aeZf
-----END PGP SIGNATURE-----
Merge tag 'staging-4.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging/IIO driver rfixes from Greg KH:
"Here are a number of small IIO and staging driver fixes for 4.11-rc6.
Nothing big here, just iio fixes for reported issues, and an ashmem
fix for a very old bug that has been reported by a number of Android
vendors"
* tag 'staging-4.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: android: ashmem: lseek failed due to no FMODE_LSEEK.
iio: hid-sensor-attributes: Fix sensor property setting failure.
iio: accel: hid-sensor-accel-3d: Fix duplicate scan index error
iio: core: Fix IIO_VAL_FRACTIONAL_LOG2 for negative values
iio: st_pressure: initialize lps22hb bootime
iio: bmg160: reset chip when probing
iio: cros_ec_sensors: Fix return value to get raw and calibbias data.
Pull VFS fixes from Al Viro:
"statx followup fixes and a fix for stack-smashing on alpha"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
alpha: fix stack smashing in old_adjtimex(2)
statx: Include a mask for stx_attributes in struct statx
statx: Reserve the top bit of the mask for future struct expansion
xfs: report crtime and attribute flags to statx
ext4: Add statx support
statx: optimize copy of struct statx to userspace
statx: remove incorrect part of vfs_statx() comment
statx: reject unknown flags when using NULL path
Documentation/filesystems: fix documentation for ->getattr()
Pull block fixes from Jens Axboe:
"Here's a pull request for 4.11-rc, fixing a set of issues mostly
centered around the new scheduling framework. These have been brewing
for a while, but split up into what we absolutely need in 4.11, and
what we can defer until 4.12. These are well tested, on both single
queue and multiqueue setups, and with and without shared tags. They
fix several hangs that have happened in testing.
This is obviously larger than I would have preferred at this point in
time, but I don't think we can shave much off this and still get the
desired results.
In detail, this pull request contains:
- a set of five fixes for NVMe, mostly from Christoph and one from
Roland.
- a series from Bart, fixing issues with dm-mq and SCSI shared tags
and scheduling. Note that one of those patches commit messages may
read like an optimization, but it is in fact an important fix for
queue restarts in particular.
- a series from Omar, most importantly fixing a hang with multiple
hardware queues when we fail to get a driver tag. Another important
fix in there is for resizing hardware queues, which nbd does when
handling multiple sockets for one connection.
- fixing an imbalance in putting the ctx for hctx request allocations
from Minchan"
* 'for-linus' of git://git.kernel.dk/linux-block:
blk-mq: Restart a single queue if tag sets are shared
dm rq: Avoid that request processing stalls sporadically
scsi: Avoid that SCSI queues get stuck
blk-mq: Introduce blk_mq_delay_run_hw_queue()
blk-mq: remap queues when adding/removing hardware queues
blk-mq-sched: fix crash in switch error path
blk-mq-sched: set up scheduler tags when bringing up new queues
blk-mq-sched: refactor scheduler initialization
blk-mq: use the right hctx when getting a driver tag fails
nvmet: fix byte swap in nvmet_parse_io_cmd
nvmet: fix byte swap in nvmet_execute_write_zeroes
nvmet: add missing byte swap in nvmet_get_smart_log
nvme: add missing byte swap in nvme_setup_discard
nvme: Correct NVMF enum values to match NVMe-oF rev 1.0
block: do not put mq context in blk_mq_alloc_request_hctx
An issue was detected with pin control hos on the Freescale i.MX after
the refactorings for more general group and function handling. We now
have the proper fix for this.
-----BEGIN PGP SIGNATURE-----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=06og
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v4.11-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fix from Linus Walleij:
"This late fix for pin control is hopefully the last I send this cycle.
The problem was detected early in the v4.11 release cycle and there
has been some back and forth on how to solve it. Sadly the proper fix
arrives late, but at least not too late.
An issue was detected with pin control on the Freescale i.MX after the
refactorings for more general group and function handling.
We now have the proper fix for this"
* tag 'pinctrl-v4.11-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: core: Fix pinctrl_register_and_init() with pinctrl_enable()
Headed to stable:
- disable HFSCR[TM] if TM is not supported, fixes a potential host kernel crash
triggered by a hostile guest, but only in configurations that no one uses
- don't try to fix up misaligned load-with-reservation instructions
- fix flush_(d|i)cache_range() called from modules on little endian kernels
- add missing global TLB invalidate if cxl is active
- fix missing preempt_disable() in crc32c-vpmsum
And a fix for selftests build changes that went in this release:
- selftests/powerpc: Fix standalone powerpc build
Thanks to:
Benjamin Herrenschmidt, Frederic Barrat, Oliver O'Halloran, Paul Mackerras.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=bTuf
-----END PGP SIGNATURE-----
Merge tag 'powerpc-4.11-7' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"Some more powerpc fixes for 4.11:
Headed to stable:
- disable HFSCR[TM] if TM is not supported, fixes a potential host
kernel crash triggered by a hostile guest, but only in
configurations that no one uses
- don't try to fix up misaligned load-with-reservation instructions
- fix flush_(d|i)cache_range() called from modules on little endian
kernels
- add missing global TLB invalidate if cxl is active
- fix missing preempt_disable() in crc32c-vpmsum
And a fix for selftests build changes that went in this release:
- selftests/powerpc: Fix standalone powerpc build
Thanks to: Benjamin Herrenschmidt, Frederic Barrat, Oliver O'Halloran,
Paul Mackerras"
* tag 'powerpc-4.11-7' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/crypto/crc32c-vpmsum: Fix missing preempt_disable()
powerpc/mm: Add missing global TLB invalidate if cxl is active
powerpc/64: Fix flush_(d|i)cache_range() called from modules
powerpc: Don't try to fix up misaligned load-with-reservation instructions
powerpc: Disable HFSCR[TM] if TM is not supported
selftests/powerpc: Fix standalone powerpc build
In the case that compat_get_bitmap fails we do not want to copy the
bitmap to the user as it will contain uninitialized stack data and leak
sensitive data.
Signed-off-by: Chris Salls <salls@cs.ucsb.edu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently, inputting the following command will succeed but actually the
value will be truncated:
# echo 0x12ffffffff > /proc/sys/net/ipv4/tcp_notsent_lowat
This is not friendly to the user, so instead, we should report error
when the value is larger than UINT_MAX.
Fixes: e7d316a02f ("sysctl: handle error writing UINT_MAX to u32 fields")
Signed-off-by: Liping Zhang <zlpnobody@gmail.com>
Cc: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Separate out kernfs from driver core and add myself as a
co-maintainer.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ops->show() can return a negative error code.
Commit 65da3484d9 ("sysfs: correctly handle short reads on PREALLOC attrs.")
(in v4.4) caused this to be stored in an unsigned 'size_t' variable, so errors
would look like large numbers.
As a result, if an error is returned, sysfs_kf_read() will return the
value of 'count', typically 4096.
Commit 17d0774f80 ("sysfs: correctly handle read offset on PREALLOC attrs")
(in v4.8) extended this error to use the unsigned large 'len' as a size for
memmove().
Consequently, if ->show returns an error, then the first read() on the
sysfs file will return 4096 and could return uninitialized memory to
user-space.
If the application performs a subsequent read, this will trigger a memmove()
with extremely large count, and is likely to crash the machine is bizarre ways.
This bug can currently only be triggered by reading from an md
sysfs attribute declared with __ATTR_PREALLOC() during the
brief period between when mddev_put() deletes an mddev from
the ->all_mddevs list, and when mddev_delayed_delete() - which is
scheduled on a workqueue - completes.
Before this, an error won't be returned by the ->show()
After this, the ->show() won't be called.
I can reproduce it reliably only by putting delay like
usleep_range(500000,700000);
early in mddev_delayed_delete(). Then after creating an
md device md0 run
echo clear > /sys/block/md0/md/array_state; cat /sys/block/md0/md/array_state
The bug can be triggered without the usleep.
Fixes: 65da3484d9 ("sysfs: correctly handle short reads on PREALLOC attrs.")
Fixes: 17d0774f80 ("sysfs: correctly handle read offset on PREALLOC attrs")
Cc: stable@vger.kernel.org
Signed-off-by: NeilBrown <neilb@suse.com>
Acked-by: Tejun Heo <tj@kernel.org>
Reported-and-tested-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A patch documenting how to specify which kernels a particular fix should
be backported to (seemingly) inadvertently added a minus sign after the
kernel version. This particular stable-tag format had never been used
prior to this patch, and was neither present when the patch in question
was first submitted (it was added in v2 without any comment).
Drop the minus sign to avoid any confusion.
Fixes: fdc81b7910 ("stable_kernel_rules: Add clause about specification of kernel versions to patch.")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
vfs_llseek will check whether the file mode has
FMODE_LSEEK, no return failure. But ashmem can be
lseek, so add FMODE_LSEEK to ashmem file.
Comment From Greg Hackmann:
ashmem_llseek() passes the llseek() call through to the backing
shmem file. 91360b02ab ("ashmem: use vfs_llseek()") changed
this from directly calling the file's llseek() op into a VFS
layer call. This also adds a check for the FMODE_LSEEK bit, so
without that bit ashmem_llseek() now always fails with -ESPIPE.
Fixes: 91360b02ab ("ashmem: use vfs_llseek()")
Signed-off-by: Shuxiao Zhang <zhangshuxiao@xiaomi.com>
Tested-by: Greg Hackmann <ghackmann@google.com>
Cc: stable <stable@vger.kernel.org> # 3.18+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull sparc fixes from David Miller:
"Several fixes here, mostly having to due with either build errors or
memory corruptions depending upon whether you have THP enabled or not"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
sparc: remove unused wp_works_ok macro
sparc32: Export vac_cache_size to fix build error
sparc64: Fix memory corruption when THP is enabled
sparc64: Fix kernel panic due to erroneous #ifdef surrounding pmd_write()
arch/sparc: Avoid DCTI Couples
sparc64: kern_addr_valid regression
sparc64: Add support for 2G hugepages
sparc64: Fix size check in huge_pte_alloc
ARM:
- Fix a problem with GICv3 userspace save/restore
- Clarify GICv2 userspace save/restore ABI
- Be more careful in clearing GIC LRs
- Add missing synchronization primitive to our MMU handling code
PPC:
- Check for a NULL return from kzalloc
s390:
- Prevent translation exception errors on valid page tables for the
instruction-exection-protection support
x86:
- Fix Page-Modification Logging when running a nested guest
-----BEGIN PGP SIGNATURE-----
iQEcBAABCAAGBQJY5/X8AAoJEED/6hsPKofo8hQH/As3CbihZMysaK6JJTx5oMZw
b3W8p8xVXVu4dKM8WnXa6m5xBDFmOa7eBB+CtT3gP68XnFvMpr/vPmDv6v6i9p8q
7VyALDqqk2fxDmgHEwuETw9XZyuhdyCz/GaINCdnAJs25wTFOA7r0WEW5W8qRJpA
9nQirapdJcknymIch1JqeWlYYmbIaFzT8jItfA9QQ7F9mG4pxC8D1k2D56lNYwTf
FJIgXgkMPe7CPDXmgc/KqT5+iVsc/+SgzP/WdH6bX/007TV71sksxxfz6fIrao0X
RtcL2WIZTXBdSNrvXflHhCfYgogPgCnYp8AsYTIa+IEijcfteJx7UiET47Ne0Ow=
=/SPG
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Radim Krčmář:
"ARM:
- Fix a problem with GICv3 userspace save/restore
- Clarify GICv2 userspace save/restore ABI
- Be more careful in clearing GIC LRs
- Add missing synchronization primitive to our MMU handling code
PPC:
- Check for a NULL return from kzalloc
s390:
- Prevent translation exception errors on valid page tables for the
instruction-exection-protection support
x86:
- Fix Page-Modification Logging when running a nested guest"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: PPC: Book3S HV: Check for kmalloc errors in ioctl
KVM: nVMX: initialize PML fields in vmcs02
KVM: nVMX: do not leak PML full vmexit to L1
KVM: arm/arm64: vgic: Fix GICC_PMR uaccess on GICv3 and clarify ABI
KVM: arm64: Ensure LRs are clear when they should be
kvm: arm/arm64: Fix locking for kvm_free_stage2_pgd
KVM: s390: remove change-recording override support
arm/arm64: KVM: Take mmap_sem in kvm_arch_prepare_memory_region
arm/arm64: KVM: Take mmap_sem in stage2_unmap_vm
Paul Burton
Matt Redfearn
Marcin Nowakowski
James Cowgill
Sebastian Andrzej Siewior
Douglas Leung
Aleksandar Markovic
Leonid Yegoshin
Huacai Chen
Ralf Baechle
Florian Fainelli
Steven J. Hill
Alex Belits
David Daney
Linus Torvalds
Chris Salls
Liping Zhang
Tejun Heo
NeilBrown
Johan Hovold
Shuxiao Zhang