Commit Graph

296 Commits

Author SHA1 Message Date
Linus Torvalds 32d687cad3 Merge branch 'fixes-for-3.6' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping
Pull DMA-mapping fixes from Marek Szyprowski:
 "Another set of fixes for ARM dma-mapping subsystem.

  Commit e9da6e9905 replaced custom consistent buffer remapping code
  with generic vmalloc areas.  It however introduced some regressions
  caused by limited support for allocations in atomic context.  This
  series contains fixes for those regressions.

  For some subplatforms the default, pre-allocated pool for atomic
  allocations turned out to be too small, so a function for setting its
  size has been added.

  Another set of patches adds support for atomic allocations to
  IOMMU-aware DMA-mapping implementation.

  The last part of this pull request contains two fixes for Contiguous
  Memory Allocator, which relax too strict requirements."

* 'fixes-for-3.6' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping:
  ARM: dma-mapping: IOMMU allocates pages from atomic_pool with GFP_ATOMIC
  ARM: dma-mapping: Introduce __atomic_get_pages() for __iommu_get_pages()
  ARM: dma-mapping: Refactor out to introduce __in_atomic_pool
  ARM: dma-mapping: atomic_pool with struct page **pages
  ARM: Kirkwood: increase atomic coherent pool size
  ARM: DMA-Mapping: print warning when atomic coherent allocation fails
  ARM: DMA-Mapping: add function for setting coherent pool size from platform code
  ARM: relax conditions required for enabling Contiguous Memory Allocator
  mm: cma: fix alignment requirements for contiguous regions
2012-09-08 16:22:43 -07:00
Olof Johansson 3800bd392f Merge branch 'fixes-for-v3.6-v2' of git://git.infradead.org/users/jcooper/linux into fixes
* 'fixes-for-v3.6-v2' of git://git.infradead.org/users/jcooper/linux:
  ARM: Kirkwood: Fix 'SZ_1M' undeclared here for db88f6281-bp-setup.c
2012-09-02 08:21:25 -07:00
Andrew Lunn 4fd2057099 ARM: Kirkwood: Fix 'SZ_1M' undeclared here for db88f6281-bp-setup.c
Linux-next has failed to compile for kirkwood since 23 August with:

arch/arm/mach-kirkwood/db88f6281-bp-setup.c:29: error: 'SZ_1M' undeclared here (not in a function)
arch/arm/mach-kirkwood/db88f6281-bp-setup.c:33: error: 'SZ_4M' undeclared here (not in a function)

Add missing <linux/sizes.h>

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-08-31 15:45:30 +00:00
Marek Szyprowski cb01b633ee ARM: Kirkwood: increase atomic coherent pool size
The default 256 KiB coherent pool may be too small for some of the Kirkwood
devices, so increase it to make sure that devices will be able to allocate
their buffers with GFP_ATOMIC flag.

Suggested-by: Josh Coombs <josh.coombs@gmail.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Jason Cooper <jason@lakedaemon.net>
2012-08-28 21:01:04 +02:00
Arnd Bergmann 0a224c514f Merge branch 'fixes-for-v3.6' of git://git.infradead.org/users/jcooper/linux into fixes
From Jason Cooper <jason@lakedaemon.net>:

Small fixes for the orion platforms including kirkwood.

* 'fixes-for-v3.6' of git://git.infradead.org/users/jcooper/linux:
  ARM: Kirkwood: fix Makefile.boot
  ARM: Kirkwood: Fix iconnect leds
  ARM: Orion: Set eth packet size csum offload limit

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-08-15 18:18:29 +02:00
Arnaud Patard (Rtp) b74ffd85e3 ARM: Kirkwood: fix Makefile.boot
While building the dtbs target, one is getting:

make dtbs
make[1]: *** No rule to make target `arch/arm/boot/kirkwood-qnap-ts219.dtb', needed by `arch/arm/boot/dtbs'.  Stop.
make: *** [dtbs] Error 2

The reason is that there's no kirkwood-qnap-ts219.dts file. Update Makefile.boot
to reflect the dts files present.

Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-08-15 13:58:52 +00:00
Arnaud Patard (Rtp) 58569aee5a ARM: Orion: Set eth packet size csum offload limit
The mv643xx ethernet controller limits the packet size for the TX
checksum offloading. This patch sets this limits for Kirkwood and
Dove which have smaller limits that the default.

As a side note, this patch is an updated version of a patch sent some years
ago: http://lists.infradead.org/pipermail/linux-arm-kernel/2010-June/017320.html
which seems to have been lost.

Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Cc: <stable@vger.kernel.org>
2012-08-15 13:58:09 +00:00
Sebastian Hesselbarth 3b6c944087 ARM: kirkwood: fix typo in Makefile.boot
Just a small typo fix to make lsxl dtbs compile

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@googlemail.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-08-07 10:48:11 +02:00
Andrew Lunn f39c1101dd ARM: Kirkwood: Replace mrvl with marvell
It has been decided to use marvell, not mrvl, in the compatibility
property. Search & replace.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
2012-07-27 16:50:57 +02:00
Andrew Lunn f3af1c73f0 ARM: Kirkwood: Describe GoFlex Net LEDs and SATA in DT.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Josh Coombs <josh.coombs@gmail.com>
2012-07-27 16:50:49 +02:00
Andrew Lunn b94a257cdb ARM: Kirkwood: Describe Dreamplug LEDs in DT.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
2012-07-27 16:50:41 +02:00
Andrew Lunn 258f367628 ARM: Kirkwood: Describe iConnects LEDs in DT.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
2012-07-27 16:50:33 +02:00
Andrew Lunn 48135a66c2 ARM: Kirkwood: Describe iConnects temperature sensor in DT.
Now that we have I2C support in DT, describe the LM63 in
the DT file for the iConnect.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
2012-07-27 16:50:26 +02:00
Andrew Lunn 157727d649 ARM: Kirkwood: Describe IB62x0 LEDs in DT.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Simon Baatz <gmbnomis@gmail.com>
2012-07-27 16:50:18 +02:00
Andrew Lunn c06c7ca77c ARM: Kirkwood: Describe IB62x0 gpio-keys in DT.
Now that the GPIO controllers have been converted over to DT,
described the gpio-keys in DT.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Simon Baatz <gmbnomis@gmail.com>
2012-07-27 16:50:10 +02:00
Jamie Lentin bb53d82726 ARM: Kirkwood: Describe DNS32? gpio-keys in DT.
Move description of GPIO keys on both the DNS320 and DNS325 into DT.

Signed-off-by: Jamie Lentin <jm@lentin.co.uk>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
2012-07-27 16:50:02 +02:00
Jamie Lentin 09059e9f29 ARM: Kirkwood: Replace DNS-320/DNS-325 leds with dt bindings
Replace code in board-dnskw with the equivalent devicetree bindings.

Signed-off-by: Jamie Lentin <jm@lentin.co.uk>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
2012-07-27 16:49:45 +02:00
Andrew Lunn 55650d4e5b ARM: Kirkwood: Describe DNS325 temperature sensor in DT.
Now that we have I2C support in DT, describe the LM75 in
the DT file for the DNS325.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jamie Lentin <jm@lentin.co.uk>
2012-07-27 16:49:36 +02:00
Andrew Lunn 2cef1a2853 ARM: Kirkwood: Use DT to configure SATA device.
Convert boards using DT, but the old way of configuring SATA to now
use properties in there DT file.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Simon Baatz <gmbnomis@gmail.com>
2012-07-27 16:49:29 +02:00
Michael Walle be2aa95675 ARM: kirkwood: use devicetree for SPI on dreamplug
Use the device tree for the SPI driver and partition layout.

Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
2012-07-27 16:49:21 +02:00
Michael Walle 4aff38a3db ARM: kirkwood: Add LS-XHL and LS-CHLv2 support
Add support for Buffalo Linkstation LS-XHL and LS-CHLv2 using the device
tree where possible.

Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
2012-07-27 16:49:10 +02:00
Josh Coombs 5136b2aa62 ARM: Kirkwood: Initial DTS support for Kirkwood GoFlex Net
This patch supplies the necessary DTS and supporting files to boot up
a Seagate GoFlex Net with 3.5.0-rc3.

Signed-off-by: Joshua Coombs <josh.coombs@gmail.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
2012-07-27 16:49:01 +02:00
Andrew Lunn 9eb61f4736 ARM: Kirkwood: Add basic device tree support for QNAP TS219.
The two different variants of QNAP TS devices, varying by SoC, put the
GPIO keys on different GPIO lines. Hence we need two different DT
board descriptions, which share the same board-ts219.c file.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Jason Cooper <jason@lakedaemon.net>
2012-07-27 16:48:52 +02:00
Andrew Lunn 97b414e119 ATA: sata_mv: Add device tree support
Add support for instantiating this driver from device tree, and add
the necassary DT information to the kirkwood.dtsi file.

This is based on previous work by Michael Walle and Jason Cooper.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Josh Coombs <josh.coombs@gmail.com>
2012-07-27 16:48:45 +02:00
Andrew Lunn 1e7bad0f5b ARM: Orion: DTify the watchdog timer.
Add device tree support to the Orion watchdog timer, and enable its
use in the kirkwood devices using device tree.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@googlemail.com>
Tested-by: Simon Baatz <gmbnomis@gmail.com>
2012-07-27 16:48:38 +02:00
Andrew Lunn e91cac0a77 ARM: Orion: Add arch support needed for I2C via DT.
The MV64XXX I2C driver needs a clock in order to calculate the baud
rate factors. So add an clk to the clk tree. Also add the base DT
properties for kirkwood devices.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>

Conflicts:
	arch/arm/mach-kirkwood/common.c
2012-07-27 16:48:29 +02:00
Michael Walle 763721205e ARM: kirkwood: use devicetree for orion-spi
Populate the devices with auxdata to set the device names which are used by
clkdev to lookup the clocks.

Signed-off-by: Michael Walle <micheal@walle.cc>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
---
v2: Add interrupts properties, although not used.
2012-07-27 16:48:22 +02:00
Andrew Lunn 278b45b06b ARM: Orion: DT support for IRQ and GPIO Controllers
Both IRQ and GPIO controllers can now be represented in DT.  The IRQ
controllers are setup first, and then the GPIO controllers. Interrupts
for GPIO lines are placed directly after the main interrupts in the
interrupt space.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@googlemail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Josh Coombs <josh.coombs@gmail.com>
Tested-by: Simon Baatz <gmbnomis@gmail.com>
2012-07-27 16:48:14 +02:00
Simon Baatz b5409430ff ARM: Kirkwood: Fix PHY disable clk problems
Commit 98d9986 (ARM: Kirkwood: Replace clock gating) and the fix 5fb2ce
(ARM: Kirkwood: clk_register_gate_fn: add fn assignment) introduced a custom
variant of clock gating which allows to define a function to be called
before gating the clock off.

This is used to disable the SATA and PCIe PHYs if the respective clocks
are unused after initialization.

However, of these two drivers, the SATA driver may be compiled as a module.
The driver re-enables the clocks at module init but the PHYs stay disabled.

Since the custom clock gating disabled the PHYs when gating the clock off,
it should also re-enable them when enabling the clock gate.  This is done by
adding a second function that may be used to enable the PHYs.

Signed-off-by: Simon Baatz <gmbnomis@gmail.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
2012-07-25 16:51:10 +02:00
Andrew Lunn f479db44d2 ARM: Kirkwood: Ensure runit clock always ticks.
Marvell engineers tell us:

	It seems that many units use the RUNIT clock.
	SPI, UART, NAND, TWSI, ...
	So it's not possible to clock gate it.

Currently the SPI, NAND and TWSI driver will clk_prepaure_enable()
this clk, but since we have no idea what ... is, and turning this clk
off results in a hard lock, unconditionally enable runit.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Simon Baatz <gmbnomis@gmail.com>
2012-07-25 16:50:45 +02:00
Andrew Lunn 0fa1f0609a ARM: Orion: Fix Virtual/Physical mixup with watchdog
The orion watchdog is expecting to be passed the physcial address of
the hardware, and will ioremap() it to give a virtual address it will
use as the base address for the hardware. However, when creating the
platform resource record, a virtual address was being used.

Add the necassary #define's so we can pass the physical address as
expected.

Tested on Kirkwood and Orion5x.

Cc: stable <stable@vger.kernel.org>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Olof Johansson <olof@lixom.net>
2012-06-23 16:19:21 -07:00
Marc Kleine-Budde 5fb2ce119c ARM: Kirkwood: clk_register_gate_fn: add fn assignment
In commit:
    98d9986 ARM: Kirkwood: Replace clock gating
the kirkwood clock gating has been reworked. A custom variant of
clock gating, that calls a custom function before gating the clock
off, has been introduced. However in clk_register_gate_fn() this
custom function "fn" is never assigned.

This patch adds the missing fn assignment.

Cc: stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@blackshift.org>
Tested-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Olof Johansson <olof@lixom.net>
2012-06-23 16:19:02 -07:00
Andrew Lunn 22cec7ca02 ARM: iconnect: Remove include of removed linux/spi/orion_spi.h
v3.5-rc1 fails to build when DT and iconnect is enabled because of
this now none existant include file.

Also remove the other two SPI include files, which are not needed
with the move to DT.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
2012-06-17 10:51:49 -07:00
Andrew Lunn 128789a829 ARM: Kirkwood: Fix clk problems modular ethernet driver
When the ethernet driver was built as a module, it would lock the
machine when loaded. At boot the ethernet clks are unused, so get
turned off.  Later, when the module is loaded, the probe function
would access the hardware before the clock was restarted, and the
machine would lock. It has also been determined that when the clk is
turned off, the interface forgets its MAC address, which for most
systems, is set by the boot loader.

When the machine setup file creates a platform device for the
interface, prepare and enable the clock for the interface. This will
ensure it is not turned off. However, if the setup file only
instantiates one platform device, the other will have its clk
disabled, thus maybe saving a little power.

Report-by: Simon Baatz <gmbnomis@gmail.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Simon Baatz <gmbnomis@gmail.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
2012-06-16 18:45:20 -07:00
Linus Torvalds 2795343705 arm-soc: clock driver changes
The new clock subsystem was merged in linux-3.4 without any users, this
 now moves the first three platforms over to it: imx, mxs and spear.
 
 The series also contains the changes for the clock subsystem itself,
 since Mike preferred to have it together with the platforms that require
 these changes, in order to avoid interdependencies and conflicts.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJPuexPAAoJEIwa5zzehBx3YBsP/0nFhXjb5t1PdLfFzGKtcZVB
 j4zXWXMHQ1fA7wIfEpZF3Nnco6MQkufF5wJPoPdn1+wmkzCn3D6IwNVWVtW4U5i9
 VGyShSbgusAAYXUe/9yYj8eN+bbRQSvdN4eWYWU6+rRXShGZ5dZZmp+IPNl54dnW
 6F8uCnHX0cnIMCpGqV+41zZgZ/4wL2k9gdqu0LO6pi07o4tGd0Z4gcySgUFAnn1R
 kofNHueYIP4UgOg8DREoBzVKlpRqMou3S2kSZUfMeb3Q9ryF7UIvaGqIILyi7PKL
 kWd3nptg0EPavfL21SwXHiGpnDpB/Gj/F70kcPLus5RYujB24C9bvBmc26z68NZx
 Sz9mbElkkIU5duZsl1nxBWJ8IZ/tSWdtmC2xQMznmV7gHyGgVwr4j47f4Uv5sBvM
 14JHDO7mqN6E6FnTFZu/oPAN5pDjgL+TVNK5BU6Wkq0zitrA6eyKDqCvBCqkO6Nn
 tNzOuyRDzMOwM7HzqXhxqtzJWXylO1Mldc4bM8X4Cocf4pnLna/X6uP6dgE6A+JY
 azVYx4I/0NdEPerDTzIcEhBDgZeBVROhUQr+kHxc4rf6WzUUbu/wEo1UKXWV66oW
 1jb1yAFFWqYjkQuQc2PD4JSx35sFJaoSaoneRtmzBzRDfzSr5KjKj1E0e1skyMFq
 7ZVLCqZD0cB9DhmMDkWP
 =rwFF
 -----END PGP SIGNATURE-----

Merge tag 'clock' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull arm-soc clock driver changes from Olof Johansson:
 "The new clock subsystem was merged in linux-3.4 without any users,
  this now moves the first three platforms over to it: imx, mxs and
  spear.

  The series also contains the changes for the clock subsystem itself,
  since Mike preferred to have it together with the platforms that
  require these changes, in order to avoid interdependencies and
  conflicts."

Fix up trivial conflicts in arch/arm/mach-kirkwood/common.c (code
removed in one branch, added OF support in another) and
drivers/dma/imx-sdma.c (independent changes next to each other).

* tag 'clock' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (97 commits)
  clk: Fix CLK_SET_RATE_GATE flag validation in clk_set_rate().
  clk: Provide dummy clk_unregister()
  SPEAr: Update defconfigs
  SPEAr: Add SMI NOR partition info in dts files
  SPEAr: Switch to common clock framework
  SPEAr: Call clk_prepare() before calling clk_enable
  SPEAr: clk: Add General Purpose Timer Synthesizer clock
  SPEAr: clk: Add Fractional Synthesizer clock
  SPEAr: clk: Add Auxiliary Synthesizer clock
  SPEAr: clk: Add VCO-PLL Synthesizer clock
  SPEAr: Add DT bindings for SPEAr's timer
  ARM i.MX: remove now unused clock files
  ARM: i.MX6: implement clocks using common clock framework
  ARM i.MX35: implement clocks using common clock framework
  ARM i.MX5: implement clocks using common clock framework
  ARM: Kirkwood: Replace clock gating
  ARM: Orion: Audio: Add clk/clkdev support
  ARM: Orion: PCIE: Add support for clk
  ARM: Orion: XOR: Add support for clk
  ARM: Orion: CESA: Add support for clk
  ...
2012-05-26 12:42:29 -07:00
Linus Torvalds f6a26ae769 arm-soc: board specific changes
While we generally attempt to get rid of board specific files and replace
 them with device tree based descriptions, a lot of platforms have not
 come that far:
 
 In shmobile, we add two new board files because their recently started
 effort to add DT support has not proceeded enough to use it for all of
 the important hardware.
 
 In Kirkwood, we are adding support for new boards with a combination of
 DT and board file contents in multiple cases.
 
 pxa/mmp and imx are extending support for existing board files but not
 adding new ones.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJPueuIAAoJEIwa5zzehBx3VvAP/32RkCrrLCQoibsczjwDPQir
 ryyT/lom005tlkXFOz9SFirlyNAn0kpDuj0xZ/HL2KgZ0FPlG0OUSRBJJvLZF2vT
 qlhf3PqnM1d2Ui6+/QdU/EJyzNkMAtajgTSvp4zDZayoNomO/VTZhW0feRYChUIl
 bJx7hnFA9VXnkhORzh9+HhKwVcdhU2R1/LMDUlYxKNnFdF0/kFgw4Gkj4MnmFlyy
 NpeLP4H95SeFhKPvmXB/2lZroaRn6wCxhPhUCHShxsH3YFy0J7zaEnmHMFSOX24n
 ++6fyb0mqiJtZPwJVbF+snb/5hP4epbmkrU5+mqtDdK8HHowAsV0ScKki0wGGmka
 Im5ryCMB+NZOD57XGajkpeQGZT+m0S8NilsZ5dy75o7el7WxnMLuUMyjlIbtnfet
 3KRF22XnsyPuvldoej/RM1Eiz86qUFl3LPO63cYT+/c9aSw0+luMp+JZp+iOcAr3
 xqyiciwOTu6CIP+DnYV72CuFa2IvLA06Eb3pgtpRUwATzS9weQ33X4Q80RaUVKxX
 VfXxCcDFl7dfGwqO6HujbxI6oHmEmvBEF9eGmFW2ocVrKnWUmjlC6y9tQxfReQDV
 SZkXKEkWPo/MLFl/AM+hTjGyu88ofOG4Vos0t3YmVyTuXekpPFb2DbPCvwnFdv8N
 kX/bfsxWPBDl3EdCQU8y
 =wkmj
 -----END PGP SIGNATURE-----

Merge tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull arm-soc board specific changes from Olof Johansson:
 "While we generally attempt to get rid of board specific files and
  replace them with device tree based descriptions, a lot of platforms
  have not come that far:

  In shmobile, we add two new board files because their recently started
  effort to add DT support has not proceeded enough to use it for all of
  the important hardware.

  In Kirkwood, we are adding support for new boards with a combination
  of DT and board file contents in multiple cases.

  pxa/mmp and imx are extending support for existing board files but not
  adding new ones."

Fix up trivial conflicts in arch/arm/mach-{mmp/ttc_dkb.c,shmobile/{Kconfig,Makefile}}

* tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (94 commits)
  ARM: shmobile: fix smp build
  ARM: kirkwood: Add support for RaidSonic IB-NAS6210/6220 using devicetree
  kirkwood: Add iconnect support
  orion/kirkwood: create a generic function for gpio led blinking
  kirkwood/orion: fix orion_gpio_set_blink
  ARM: kirkwood: Define DNS-320/DNS-325 NAND in fdt
  kirkwood: Allow nand to be configured via. devicetree
  mtd: Add orion_nand devicetree bindings
  ARM: kirkwood: Basic support for DNS-320 and DNS-325
  ARM: mach-shmobile: Use DT_MACHINE for armadillo 800 eva
  ARM: mach-shmobile: Use DT_MACHINE for KZM9G
  ARM: pxa: hx4700: Add Synaptics NavPoint touchpad
  ARM: pxa: Use REGULATOR_SUPPLY macro
  ARM: mach-shmobile: kzm9g: enable SMP boot
  ARM: mach-shmobile: kzm9g: defconfig update
  ARM: mach-shmobile: kzm9g: add PCF8757 gpio-key
  ARM: mach-shmobile: kzm9g: add SDHI support
  ARM: mach-shmobile: kzm9g: add MMCIF support
  ARM: mach-shmobile: kzm9g: correct screen direction
  ARM: mach-shmobile: sh73a0.h: add GPIO_NR
  ...
2012-05-22 13:32:53 -07:00
Linus Torvalds ff8ce5f67d Merge branch 'for-linus' of git://git.linaro.org/people/rmk/linux-arm
Pull core ARM updates from Russell King:
 "This is the bulk of the core ARM updates for this merge window.
  Included in here is a different way to handle the VIVT cache flushing
  on context switch, which should allow scheduler folk to remove a
  special case in their core code.

  We have architectured timer support here, which is a set of timers
  specified by the ARM architecture for future SoCs.  So we should see
  less variability in timer design going forward.

  The last big thing here is my cleanup to the way we handle PCI across
  ARM, fixing some oddities in some platforms which hadn't realised
  there was a way to deal with their private data already built in to
  our PCI backend.

  I've also removed support for the ARMv3 architecture; it hasn't worked
  properly for years so it seems pointless to keep it around."

* 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: (47 commits)
  ARM: PCI: remove per-pci_hw list of buses
  ARM: PCI: dove/kirkwood/mv78xx0: use sys->private_data
  ARM: PCI: provide a default bus scan implementation
  ARM: PCI: get rid of pci_std_swizzle()
  ARM: PCI: versatile: fix PCI interrupt setup
  ARM: PCI: integrator: use common PCI swizzle
  ARM: 7416/1: LPAE: Remove unused L_PTE_(BUFFERABLE|CACHEABLE) macros
  ARM: 7415/1: vfp: convert printk's to pr_*'s
  ARM: decompressor: avoid speculative prefetch from non-RAM areas
  ARM: Remove ARMv3 support from decompressor
  ARM: 7413/1: move read_{boot,persistent}_clock to the architecture level
  ARM: Remove support for ARMv3 ARM610 and ARM710 CPUs
  ARM: 7363/1: DEBUG_LL: limit early mapping to the minimum
  ARM: 7391/1: versatile: add some auxdata for device trees
  ARM: 7389/2: plat-versatile: modernize FPGA IRQ controller
  AMBA: get rid of last two uses of NO_IRQ
  ARM: 7408/1: cacheflush: return error to userspace when flushing syscall fails
  ARM: 7409/1: Do not call flush_cache_user_range with mmap_sem held
  ARM: 7404/1: cmpxchg64: use atomic64 and local64 routines for cmpxchg64
  ARM: 7347/1: SCU: use cpu_logical_map for per-CPU low power mode
  ...
2012-05-21 16:01:50 -07:00
Russell King 43ba990bb7 ARM: PCI: dove/kirkwood/mv78xx0: use sys->private_data
Use sys->private_data to store the PCIe port data structure.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-05-16 15:24:11 +01:00
Simon Baatz f552036353 ARM: kirkwood: Add support for RaidSonic IB-NAS6210/6220 using devicetree
Add support for the IB-NAS6210 and IB-NAS 6220. Describe as much as
currently possible in the devicetree files, including the NAND partitions.
Use the partition scheme of the original firmware by default.

Create a board-ib62x0.c for everything else.

Signed-off-by: Simon Baatz <gmbnomis@gmail.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-05-15 03:18:49 +00:00
Arnaud Patard (Rtp) c06cd9bfca kirkwood: Add iconnect support
Add support for Iomega Iconnect system.

Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Tested-By: Adam Baker <linux@baker-net.org.uk>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-05-15 03:12:27 +00:00
Jamie Lentin 858156bd6c kirkwood: Allow nand to be configured via. devicetree
Add default configuration for NAND, to be enabled in your board config. Ensure
clock gating is set appropriately when the NAND is enabled.

Acked-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Jamie Lentin <jm@lentin.co.uk>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-05-15 02:29:11 +00:00
Jamie Lentin 9007d10073 ARM: kirkwood: Basic support for DNS-320 and DNS-325
Add support for the DNS-320 and DNS-325. Describe as much as currently possible
in the devicetree files, create a board-dnskw.c for everything else.

Changes since last submission (V3) [Addressing comments by]:-

* One MACH_DLINK_KIRKWOOD_DT for all dtb files [Grant Likely, Jason Cooper]
* Drop brain-dead select "select CONFIG_MTD_OF_PARTS" [Grant Likely]
* Don't add NAND support then throw it away immediately after [Grant Likely]
* Describe purpose of MPP 41, 42 & 49

Changes since last submission (V2):-

* Use IEEE-compliant "okay", rather than "ok" [Scott Wood]

Signed-off-by: Jamie Lentin <jm@lentin.co.uk>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-05-15 02:28:01 +00:00
Russell King daeb4c0c3b ARM: PCI: get rid of pci_std_swizzle()
Most PCI implementations use the standard PCI swizzle function, which
handles the well defined behaviour of PCI-to-PCI bridges which can be
found on cards (eg, four port ethernet cards.)

Rather than having almost every platform specify the standard swizzle
function, make this the default when no swizzle function is supplied.
Therefore, a swizzle function only needs to be provided when there is
something exceptional which needs to be handled.

This gets rid of the swizzle initializer from 47 files, and leaves us
with just two platforms specifying a swizzle function: ARM Integrator
and Chalice CATS.

Acked-by: Krzysztof Hałasa <khc@pm.waw.pl>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-05-13 17:12:16 +01:00
Andrew Lunn 98d9986cb8 ARM: Kirkwood: Replace clock gating
Add a varient of the basic clk-gate code. This variant calls a
function before gating the clock off. This function is used to disable
the SATA or PCIe PHY.

Now that all the drivers prepare and enable there clk as needed, there
is no need for the common code to keep track of which clocks need
gating on. Let the common clock framework turn off clocks which are
not used.

Buy using the added clk varient, when the clk framework turns off SATA
or PCIe clocks, we also disabled SATA and PCIe PHYs which were not
needed.

The function kirkwood_pcie_id() can now be called outside of __init
code, so remove this property for it, and functions it calls.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Jamie Lentin <jm@lentin.co.uk>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-05-08 16:34:04 -07:00
Andrew Lunn e919c71665 ARM: Orion: Audio: Add clk/clkdev support
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Jamie Lentin <jm@lentin.co.uk>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-05-08 16:34:03 -07:00
Andrew Lunn 27e53cfbce ARM: Orion: PCIE: Add support for clk
Prepare and enable the clocks when the board indicates the pcie buses
will be used.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Jamie Lentin <jm@lentin.co.uk>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-05-08 16:34:02 -07:00
Andrew Lunn c510182b1c ARM: Orion: XOR: Add support for clk
Some orion platforms can gate the XOR driver clock. If the clock
exisits, unable/disable it as appropriate.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Jamie Lentin <jm@lentin.co.uk>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-05-08 16:34:02 -07:00
Andrew Lunn 1f80b126d0 ARM: Orion: CESA: Add support for clk
Some orion platforms support gating of the clock. If the clock exists
enable/disbale it as appropriate.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Jamie Lentin <jm@lentin.co.uk>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-05-08 16:34:01 -07:00
Andrew Lunn f4f7561e03 ARM: Orion: SDIO: Add support for clk.
Some orion devices can gate the SDIO clock. If the clock exists,
enable/disable it as appropriate.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Jamie Lentin <jm@lentin.co.uk>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-05-08 16:34:00 -07:00
Andrew Lunn 9c2bd504b5 ARM: Orion: NAND: Add support for clk, if there is one.
Not all orion platforms can gate the clock, but if it does exist,
enable/disable it as appropriate.

v2: Fix the name of the clkdev entry.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Jamie Lentin <jm@lentin.co.uk>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-05-08 16:33:59 -07:00