Commit Graph

120218 Commits

Author SHA1 Message Date
Marcel Holtmann 2eda66f4a0 Bluetooth: Add fine grained mem_flags usage to btusb driver
The URB submission routines need more fine grained control for the
mem_flags used by kmalloc(), usb_alloc_urb() and usb_submit_urb() to
better support different caller situations. Add a mem_flags parameter
and give the caller full control.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-11-30 12:17:10 +01:00
Tilman Schmidt 25f13048bc gigaset: get rid of info() and warn() macros
Join the move away from the obsolete info() macro, opencoding the
remaining uses. While we're at it, also get rid of the warn() macro
by promoting the three remaining uses to err().

Signed-off-by: Tilman Schmidt <tilman@imap.cc>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-29 21:38:28 -08:00
Tilman Schmidt af4218c3a6 gigaset: remove unnecessary poll method
The N_GIGASET_M101 line discipline implemented by the ser_gigaset
driver does not transfer any data from/to userspace through the
tty interface. Therefore a poll method is not needed.

Signed-off-by: Tilman Schmidt <tilman@imap.cc>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-29 21:38:04 -08:00
Roland Dreier c5419e6f05 cxgb3: Fix sparse warning and micro-optimize is_pure_response()
The function is_pure_response() does "ntohl(var) & const" and then
essentially just tests whether the result is 0 or not; this can be done
more efficiently by computing "var & htonl(const)" instead and doing the
byte swap at compile time instead of run time.

This change slightly shrinks the compiled code; eg on x86-64 we save a
couple of bswapl instructions:

add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-8 (-8)
function                                     old     new   delta
t3_sge_intr_msix_napi                        544     536      -8

and this also has the pleasant side effect of fixing a sparse warning:

    drivers/net/cxgb3/sge.c:2313:15: warning: restricted degrades to integer

Signed-off-by: Roland Dreier <rolandd@cisco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-28 21:55:42 -08:00
Giuseppe Cavallaro f95be1806f phy: add the ST ste10Xp PHYs
This patch adds the STMicroelectronics ste10xp PHY device driver.
It supports both the ste100p and the ste101p devices.

Suspend/resume alredy added.

Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-28 16:42:41 -08:00
David S. Miller 4621bf1298 phy: Add file missed in previous commit.
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-28 16:40:26 -08:00
Giuseppe Cavallaro 0f0ca340e5 phy: power management support
This patch adds the power management support into the physical
abstraction layer.

Suspend and resume functions respectively turns on/off the bit 11
into the PHY Basic mode control register.
Generic PHY device starts supporting PM.

In order to support the wake-on LAN and avoid to put in power down
the PHY device, the MDIO is aware of what the Ethernet device wants to do.

Voluntary, no CONFIG_PM defines were added into the sources.
Also generic suspend/resume functions are exported to allow
other drivers use them (such as genphy_config_aneg etc.).

Within the phy_driver_register function, we need to remove the
memset. It overrides the device driver owner and it is not good.

Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-28 16:24:56 -08:00
Giuseppe Cavallaro 914804b95c phy: add natsemi PHY driver
This patch adds the PHY device driver for the National Semiconductor
DP83865 Gig PHYTER.

Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-28 16:14:12 -08:00
Ilpo Järvinen 65a467f553 ne2: silence static never defined warnings
These warning originate from 50014f1 (ne2: convert to
net_device_ops) which did drop those functions.

drivers/net/ne2.c:140: warning: 'ne_open' declared 'static' but never defined
drivers/net/ne2.c:141: warning: 'ne_close' declared 'static' but never defined

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-28 15:55:00 -08:00
Ilpo Järvinen d8e8034dcd bnx2: use net_device_stats nowadays available in net_device
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-28 15:52:43 -08:00
Ilpo Järvinen 9fd428761a niu: use net_device_stats nowadays available in net_device
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-28 15:52:00 -08:00
Hannes Eder 6113b748fb pkt_sched: fix sparse warning
Impact: make global function static

Fix the following sparse warning:

  net/sched/sch_api.c:192:14: warning: symbol 'qdisc_match_from_root' was not declared. Should it be static?

Signed-off-by: Hannes Eder <hannes@hanneseder.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-28 03:06:46 -08:00
Patrick McHardy ea5693ccc5 netlink: allow empty nested attributes
validate_nla() currently doesn't allow empty nested attributes. This
makes userspace code unnecessarily complicated when starting and ending
the nested attribute is done by generic upper level code and the inner
attributes are dumped by a module.

Add a special case to accept empty nested attributes. When the nested
attribute is non empty, the same checks as before are performed.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-28 03:05:19 -08:00
David S. Miller ed77a89c30 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/kaber/nf-next-2.6
Conflicts:

	net/netfilter/nf_conntrack_netlink.c
2008-11-28 02:19:15 -08:00
Harvey Harrison 475ad8e217 decnet: compile fix for removal of byteorder wrapper
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-27 23:04:13 -08:00
Al Viro feea6a574d ixgbe: section fixes
ixgbe_init_interrupt_scheme() is called from ixgbe_resume().  Build that
with CONFIG_PM and without CONFIG_HOTPLUG and you've got a problem.
Several helpers called by it also are misannotated __devinit.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-27 15:34:07 -08:00
Randy Dunlap 157653ce79 sctp: fix missing label when PROC_FS=n
Fix missing label when CONFIG_PROC_FS=n:

net/sctp/protocol.c: In function 'sctp_proc_init':
net/sctp/protocol.c:106: error: label 'out_nomem' used but not defined
make[3]: *** [net/sctp/protocol.o] Error 1

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-27 15:30:53 -08:00
Alexander Duyck 40a914fa72 igb: Add support for pci-e Advanced Error Reporting
Add the calls necessary to enable advanced error reporting for igb on
systems with AER enabled.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-27 00:24:37 -08:00
Jeff Kirsher f4113030e7 e100: cleanup link up/down messages
The system log messages created on a link status change need to follow a
specific format to work with tools some customers use.  This also makes
the messages consistant with other Intel driver link messages.

Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-27 00:23:37 -08:00
Jeff Kirsher d276016cf9 ixgb: cleanup link up/down messages
The system log messages created on a link status change need to follow a
specific format to work with tools some customers use.  This also makes
the messages consistant with other Intel driver link messages.

Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-27 00:23:12 -08:00
Jeff Kirsher b30c4d8f82 e1000: cleanup link up/down messages
The system log messages created on a link status change need to follow a
specific format to work with tools some customers use.  This also makes
the messages consistant with other Intel driver link messages.

Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-27 00:22:45 -08:00
Jeff Kirsher a46e534bc7 ixgbe: cleanup link up/down messages
The system log messages created on a link status change need to follow a
specific format to work with tools some customers use.  This also makes
the messages consistant with other Intel driver link messages.

Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-27 00:22:21 -08:00
Alexander Duyck 527d47c111 igb: link up/down messages must follow a specific format
The system log messages created on a link status change need to follow a
specific format to work with tools some customers use.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-27 00:21:39 -08:00
Harvey Harrison c4106aa88a decnet: remove private wrappers of endian helpers
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Reviewed-by: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-27 00:12:47 -08:00
David S. Miller 5b9ab2ec04 Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:

	drivers/net/hp-plus.c
	drivers/net/wireless/ath5k/base.c
	drivers/net/wireless/ath9k/recv.c
	net/wireless/reg.c
2008-11-26 23:48:40 -08:00
Divy Le Ray 851fd7bd88 cxgb3: Update FW loading path.
Update FW loading path to accomodate in-kernel images location

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-26 15:38:36 -08:00
Divy Le Ray ad58633c83 cxgb3: integrate FW and protocol engines in the kernel
Include firmware and protocol images in the kernel image if requested

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-26 15:37:50 -08:00
Divy Le Ray 5256554489 cxgb3: avoid potential memory leak.
Add consistency in alloc_ring() parameter checking
to avoid potential memory leaks.
alloc_ring() callers are correct fo far.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-26 15:35:59 -08:00
Divy Le Ray 43a944f373 cxgb3: set hard_xmit in the netdev_ops
Fix t3_eth_xmit() missing into the netdev_ops structure.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-26 15:35:26 -08:00
David S. Miller b5ddedc9cc Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 2008-11-26 15:28:40 -08:00
Jarek Poplawski 244e6c2d07 pkt_sched: gen_estimator: Optimize gen_estimator_active()
Since all other gen_estimator functions use bstats and rate_est params
together, and searching for them is optimized now, let's use this also
in gen_estimator_active(). The return type of gen_estimator_active()
is changed to bool, and gen_find_node() parameters to const, btw.

In tcf_act_police_locate() a check for ACT_P_CREATED is added before
calling gen_estimator_active().

Signed-off-by: Jarek Poplawski <jarkao2@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-26 15:24:32 -08:00
John W. Linville b235507cc5 mac80211_hwsim: fix-up some print_mac merge damage
Some print_mac -> %pM conversions got lost in some merge or another...

Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26 09:47:52 -05:00
Ivan Kuten 860c6e6a15 mac80211: fix unaligned access in ieee80211_wep_encrypt_data
Signed-off-by: Ivan Kuten <ivan.kuten@promwad.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26 09:47:51 -05:00
Christian Lamparter b50563a685 p54: fix wmm queue settings
This patch fixes a regression (introduced by
"p54: more definitions form lmac_longbow.h and pda.h")

It turned out that the "ret" variable wasn't initialized and
this caused the following warnings/errors to appear:

wmaster1: failed to set TX queue parameters for queue 2
wmaster1: failed to set TX queue parameters for queue 3
wmaster1: failed to set TX queue parameters for queue 1
wmaster1: failed to set TX queue parameters for queue 0

Signed-off-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26 09:47:50 -05:00
Sujith 99405f930f ath9k: Use proper TX channel width for setting channels
The TX channel width of the BSS can be obtained only after association.
In all cases, default to HT20 if HT is enabled, and set
chan width to HT40 only if the BSS supports it.

Signed-off-by: Sujith <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26 09:47:49 -05:00
Sujith ff37e337be ath9k: Code scrub
Merge core.c and base.c
Remove Antenna Diversity (unused now).
Remove unused chainmask handling code.
Comment, indentation scrub.

Signed-off-by: Sujith <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26 09:47:49 -05:00
Jouni Malinen bf8c1ac6d8 nl80211: Change max TX power to be in mBm instead of dBm
In order to be consistent with NL80211_ATTR_POWER_RULE_MAX_EIRP,
change NL80211_FREQUENCY_ATTR_MAX_TX_POWER to use mBm and U32 instead
of dBm and U8. This is a userspace interface change, but the previous
version had not yet been pushed upstream and there are no userspace
programs using this yet, so there is justification to get this change in
as long as it goes in before the previous version gets out.

Signed-off-by: Jouni Malinen <j@w1.fi>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26 09:47:48 -05:00
David Kilroy 39d1ffee57 orinoco: Provide option to avoid unnecessary fw caching
Make firmware caching on startup optional, and make it default.

When the option is not selected and PM_SLEEP is configured, then
cache firmware in the suspend pm_notifier. This configuration saves
about 64k RAM in normal use, but can lead to a situation where the
driver is configured to use a different firmware.

Signed-off by: David Kilroy <kilroyd@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26 09:47:47 -05:00
David Kilroy ac7cafd722 orinoco: Resume spectrum_cs in the same way as orinoco_cs
Retrieval of external firmware has been resolved, and should work with
the standard orinoco resume algorithm.

This fixes an issue where priv->hw_unavailable indicates the card is
ready when firmware has not been loaded.

Signed-off by: David Kilroy <kilroyd@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26 09:47:46 -05:00
David Kilroy 2cea7b2619 orinoco: Cache Symbol firmware
Signed-off by: David Kilroy <kilroyd@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26 09:47:46 -05:00
David Kilroy 7473431297 orinoco: Separate fw caching from download
This refactorring will make it easier to share logic with Symbol
firmware.

Signed-off by: David Kilroy <kilroyd@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26 09:47:45 -05:00
Luis R. Rodriguez cb71d9bafb ath9k: Handle -ENOMEM on RX gracefully
We would get an oops on RX on -ENOMEM by passing
NULL to the hardware on ath_rx_buf_link(). The oops
would look something like this:

ath_rx_tasklet+0x515/0x53b
ath9k_tasklet+0x48
tasklet_action
__do_softirq
irq_exit
do_IRQ

RIP: ath_rx_buf_link+0x3a

We correct this by handling the requeue directly on
the ath_rx_tasklet() and trying to allocate an skb
*prior* to sending up the last hardware processed
skb. If we run out of memory this gauranteees we have
skbs to work with while it simply drops new received
frames.

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26 09:47:44 -05:00
Henrique de Moraes Holschuh 24689c8590 rfkill: always call get_state() hook on resume
We "optimize" away the get_state() hook call on rfkill_toggle_radio
when doing a forced state change.  This means the resume path is not
calling get_state() as it should.

Call it manually on the resume handler, as we don't want to mess with
the EPO path by removing the optimization.  This has the added benefit
of making it explicit that rfkill->state could have been modified
before we hit the rfkill_toggle_radio() call in the class resume
handler.

Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Acked-by: Ivo van Doorn <IvDoorn@gmail.com>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26 09:47:44 -05:00
Henrique de Moraes Holschuh f80b5e99c7 rfkill: preserve state across suspend
The rfkill class API requires that the driver connected to a class
call rfkill_force_state() on resume to update the real state of the
rfkill controller, OR that it provides a get_state() hook.

This means there is potentially a hidden call in the resume code flow
that changes rfkill->state (i.e. rfkill_force_state()), so the
previous state of the transmitter was being lost.

The simplest and most future-proof way to fix this is to explicitly
store the pre-sleep state on the rfkill structure, and restore from
that on resume.

Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Acked-by: Ivo van Doorn <IvDoorn@gmail.com>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26 09:47:43 -05:00
Vivek Natarajan 5925d976fb mac80211: Look out for some other AP when disassoc is received.
When a disassoc packet is received from the AP with a reason code of
'leaving the BSS', mac80211 should go into DISABLED state just as it
would do if the AP suddenly went away for some reason, as that is what
will happen shortly after the AP leaves anyway.

Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26 09:47:42 -05:00
Jouni Malinen e2f367f269 nl80211: Report max TX power in NL80211_BAND_ATTR_FREQS
This is useful information to provide for userspace (e.g., hostapd needs
this to generate Country IE).

Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26 09:47:41 -05:00
Felix Fietkau 1048643ea9 ath5k: Clean up eeprom parsing and add missing calibration data
This patch brings the ath5k eeprom parsing code in sync with the work
done on ath_info by Nick Kossifidis and integrates the missing parts
based on the code of the Atheros Legacy HAL release.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26 09:47:41 -05:00
Vasanthakumar Thiagarajan 7ac47010a4 ath9k: Dont update rate control for every AMPDU
Update the rate control only with the tx status of first
AMPDU of an aggregation. This patch fixes frequent drops
in throughput.

Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26 09:47:40 -05:00
Winkler, Tomas 40fc95d57c iwlwifi: TX update chicken bits
This instructs FH to increment the retry count of a packet when
it is brought from the memory to TX-FIFO to save transactions
during aggregation flow.

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26 09:47:39 -05:00
Winkler, Tomas 31a73fe4f3 iwlwifi: TX setup fix confusion between TX queue and TX DMA channel
This patch configures correctly TX DMA channel. It is not
the same as TX queue.

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26 09:47:39 -05:00