Commit Graph

2492 Commits

Author SHA1 Message Date
Dan Williams 9508a66f89 [SCSI] libsas: async ata scanning
libsas ata error handling is already async but this does not help the
scan case.  Move initial link recovery out from under host->scan_mutex,
and delay synchronization with eh until after all port probe/recovery
work has been queued.

Device ordering is maintained with scan order by still calling
sas_rphy_add() in order of domain discovery.

Since we now scan the domain list when invoking libata-eh we need to be
careful to check for fully initialized ata ports.

Acked-by: Jack Wang <jack_wang@usish.com>
Acked-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-29 15:35:41 -06:00
Dan Williams 81c757bc69 [SCSI] libsas: execute transport link resets with libata-eh via host workqueue
Link resets leave ata affiliations intact, so arrange for libsas to make
an effort to avoid dropping the device due to a slow-to-recover link.
Towards this end carry out reset in the host workqueue so that it can
check for ata devices and kick the reset request to libata.  Hard
resets, in contrast, bypass libata since they are meant for associating
an ata device with another initiator in the domain (tears down
affiliations).

Need to add a new transport_sas_phy_reset() since the current
sas_phy_reset() is a utility function to libsas lldds.  They are not
prepared for it to loop back into eh.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-19 14:13:51 -06:00
Jean-Christophe PLAGNIOL-VILLARD 88dcde98ad pata/at91: use newly introduced SMC accessors
pata_at91 driver is broken since faee0cc:
"make smc register base soc independent"
Fix it with newly introduced SMC accessors.

The overall action of removal of at91_sys_read/write will allow
to use the pata_at91 on a single zImage kernel.

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: linux-ide@vger.kernel.org
2012-02-13 18:31:37 +01:00
Benjamin Larsson b73fa4630e [libata] ata_piix: Add Toshiba Satellite Pro A120 to the quirks list
due to broken suspend functionality.

Signed-off-by: Benjamin Larsson <benjamin@southpole.se>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-01-17 20:50:53 -05:00
Vladimir LAVALLADE 3a25179e06 [libata] add DVRTD08A and DVR-215 to NOSETXFER device quirk list
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-01-17 20:50:07 -05:00
Sonic Zhang 81b0287d34 [libata] pata_bf54x: Support sg list in bmdma transfer.
BF54x on-chip ATAPI controller allows maximum 0x1fffe bytes to be transfered
in one ATAPI transfer. So, set the max sg_tablesize to 4.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-01-17 20:49:28 -05:00
Jerry Huang 93272b132a [libata] sata_fsl: fix the controller operating mode
Configure the FSL SATA controller to the preferred, enterprise mode.

Signed-off-by: Yutaka Ando <r46913@freescale.com>
Signed-off-by: Jerry Huang <Chang-Ming.Huang@freescale.com>
CC: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-01-17 20:49:07 -05:00
Lin Ming 966f1212e1 [libata] enable ata port async suspend
This saves devices suspend/resume time.

Tested system suspend/resume with SATA IDE/AHCI mode 3 times.
Below is the time took for devices suspend/resume.

SATA mode    vanilla-kernel           patched-kernel
---------    ---------------------    ---------------------
IDE          suspend: 0.744           suspend: 0.432
             (0.716, 0.768, 0.748)    (0.440, 0.428, 0.428)

             resume: 5.084            resume: 2.209
             (5.100, 5.064, 5.088)    (2.168, 2.232, 2.228)

AHCI:        suspend: 0.725           suspend: 0.449
             (0.740, 0.708, 0.728)    (0.456, 0.448, 0.444)

             resume: 2.556            resume: 1.896
             (2.604, 2.492, 2.572)    (1.932, 1.872, 1.884)

Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-01-17 20:48:06 -05:00
Rusty Russell 90ab5ee941 module_param: make bool parameters really bool (drivers & misc)
module_param(bool) used to counter-intuitively take an int.  In
fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy
trick.

It's time to remove the int/unsigned int option.  For this version
it'll simply give a warning, but it'll break next kernel version.

Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-01-13 09:32:20 +10:30
Linus Torvalds abce00f962 Merge branch 'upstream-linus' of git://github.com/jgarzik/libata-dev
* 'upstream-linus' of git://github.com/jgarzik/libata-dev:
  ahci: support the STA2X11 I/O Hub
  pata_bf54x: fix BMIDE status register emulation
  ata: add ata port hibernate callbacks
  ata: update ata port's runtime status during system resume
  [SCSI] runtime resume parent for child's system-resume
  ahci: platform support for suspend/resume
  libata-core: kill duplicate statement in ata_do_set_mode()
  pata_of_platform: remove direct dependency on OF_IRQ
  SATA/PATA: convert drivers/ata/* to use module_platform_driver()
  pata_cs5536: forward port changes from cs5536
  libata-sff: use ATAPI_{COD|IO}
  ata: add ata port runtime PM callbacks
  ata: add ata port system PM callbacks
  [SCSI] sd: check runtime PM status in sd_shutdown
  [SCSI] check runtime PM status in system PM
  [SCSI] add flag to skip the runtime PM calls on the host
  ata: make ata port as parent device of scsi host
  ahci: start engine only during soft/hard resets
2012-01-10 10:19:17 -08:00
Linus Torvalds 5ede3ceb7b New feature development
This adds support for new features, and contains stuff from most
 platforms. A number of these patches could have fit into other
 branches, too, but were small enough not to cause too much
 confusion here.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIVAwUATwtYgGCrR//JCVInAQKzRRAAybELlfOIT1fyVlzkzIgw0/OKxS75Vqda
 v5mNYUfQ001WxGjwbFGgFphrQgyhulmLj6gN5l1rwaBjEZlwLe5uk3sReeqeDMLk
 bERLbpg22ymka4JVhvugq5qh9UP2ptlvZV/cAZC0u2JBq+CaarFIJsrzbOyXAngf
 4kUkaMhKi8DDZTqrwwACaLxR7qtf3ddiSxNLZ93X4fDh4a3qs/EJErVg/xCFlfM3
 YTzTjKuqLV2cGT34E9YTJieN9o94G+PiqvbDsP3kOwG2dSElpRWsZwX/0hDoyCxN
 cWbqPfrrdzt/kDcNnNd8MZ16AJlPc4ElVVEWPF71tKP3HfKqtZ0vMlpzsldioFz6
 8AKvaXJXRkRddY4KqNcXeEQHcDxO0uniG/3lhZY8NlzO/1PnPQ4hGl8fhw+e/2z0
 nAQFUsCVIXacsxamPk/fFBUhYzyK7JrnH4pB3b7SPcCj7X9MVyWK+pbT5LA+VGOL
 Ys8tv3NtTWEObyW1s3NT+BEy9FkkRu4EG3TxPwHUXk4BTwa6nDmJBPjk7Hv7q4cn
 T58lPet8Aylhht2aZx+0dxK3MHtMOmgsJ5jQF0OAi48Kmx8kXPZ1AeXObROncbZL
 aI7qfuGTzps7MlUBYlmrMdceTfYLeOqIEoVyFX8N4xLE33alk8DMKc37QoTJVuxQ
 KrY8sCVMkK0=
 =N2B4
 -----END PGP SIGNATURE-----

Merge tag 'devel' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

New feature development

This adds support for new features, and contains stuff from most
platforms. A number of these patches could have fit into other
branches, too, but were small enough not to cause too much
confusion here.

* tag 'devel' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (28 commits)
  mfd/db8500-prcmu: remove support for early silicon revisions
  ARM: ux500: fix the smp_twd clock calculation
  ARM: ux500: remove support for early silicon revisions
  ARM: ux500: update register files
  ARM: ux500: register DB5500 PMU dynamically
  ARM: ux500: update ASIC detection for U5500
  ARM: ux500: support DB8520
  ARM: picoxcell: implement watchdog restart
  ARM: OMAP3+: hwmod data: Add the default clockactivity for I2C
  ARM: OMAP3: hwmod data: disable multiblock reads on MMC1/2 on OMAP34xx/35xx <= ES2.1
  ARM: OMAP: USB: EHCI and OHCI hwmod structures for OMAP4
  ARM: OMAP: USB: EHCI and OHCI hwmod structures for OMAP3
  ARM: OMAP: hwmod data: Add support for AM35xx UART4/ttyO3
  ARM: Orion: Remove address map info from all platform data structures
  ARM: Orion: Get address map from plat-orion instead of via platform_data
  ARM: Orion: mbus_dram_info consolidation
  ARM: Orion: Consolidate the address map setup
  ARM: Kirkwood: Add configuration for MPP12 as GPIO
  ARM: Kirkwood: Recognize A1 revision of 6282 chip
  ARM: ux500: update the MOP500 GPIO assignments
  ...
2012-01-09 14:38:51 -08:00
Alessandro Rubini 318893e142 ahci: support the STA2X11 I/O Hub
The AHCI controller found in the STA2X11 chip uses BAR number 0
instead of 5. Also, the chip's fixup code sets a special DMA mask
for all of its PCI functions, and the mask must be preserved here.

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>
Acked-by: Giancarlo Asnaghi <giancarlo.asnaghi@st.com>
Cc: Alan Cox <alan@linux.intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-01-08 19:24:06 -05:00
Sergei Shtylyov 909fefc251 pata_bf54x: fix BMIDE status register emulation
The author of this driver clearly wasn't familiar with the BMIDE specification
(also known as SFF-8038i) when he implemented the bmdma_status() method: first,
the interrupt bit of the BMIDE status register corresponds to nothing else but
INTRQ signal (ATAPI_DEV_INT here); second, the error bit is only set if the
controller encounters issue doing the bus master transfers, not on the IDE DMA
burst termination interrupts like here (moreover, setting the error bit doesn't
cause an interrupt).  We now need to disable all those unused interrupts...

(The only thing I couldn't figure out is how to flush the FIFO to memory once
the interrupt happens as required by the mentioned spec.)

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-01-08 19:24:02 -05:00
Lin Ming 33574d68ae ata: add ata port hibernate callbacks
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-01-08 19:14:59 -05:00
Lin Ming e90b1e5a6e ata: update ata port's runtime status during system resume
The ata port is brought back to full power state during system resume.
So its runtime PM status will have to be updated to reflect
the actual post-system sleep status.

This also fixes below warning during system suspend/resume.

WARNING: at /work/linux/drivers/ata/libata-eh.c:4034
ata_scsi_port_error_handler+0x89/0x557()

4034         WARN_ON(!(ap->pflags & ATA_PFLAG_SUSPENDED));

Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-01-08 19:14:59 -05:00
Brian Norris 17ab594fa5 ahci: platform support for suspend/resume
Add platform hooks for custom suspend() and resume() functions. The
generic suspend/resume code in drivers/ata/ahci_platform.c is adapted
from the PCI version in drivers/ata/ahci.c.

Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-01-08 19:14:59 -05:00
Sergei Shtylyov 80a9c43000 libata-core: kill duplicate statement in ata_do_set_mode()
Commit b3a706014e (libata: Add a
drivers/ide style DMA disable) neglected to remove the line in
ata_do_set_mode() it has obviously made useless/duplicated.  Do this
now, and make a line added back then wrapped properly...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-01-08 19:14:58 -05:00
Rob Herring d0643aa166 pata_of_platform: remove direct dependency on OF_IRQ
CONFIG_OF_IRQ is not available on some platforms and using of_irq_*
breaks the build. Since resources are already populated in the platform
device, get the irq from there instead.

Reported-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-01-08 19:14:58 -05:00
Axel Lin 99c8ea3e57 SATA/PATA: convert drivers/ata/* to use module_platform_driver()
This patch converts the drivers in drivers/ata/* to use the
module_platform_driver() macro which makes the code smaller and a bit
simpler.

Cc: Viresh Kumar <viresh.kumar@st.com>
Cc: Jeff Garzik <jgarzik@pobox.com>
Cc: Arnaud Patard <arnaud.patard@rtp-net.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Sylvain Munaut <tnt@246tNt.com>
Cc: Anton Vorontsov <avorontsov@ru.mvista.com>
Cc: Marek Vasut <marek.vasut@gmail.com>
Cc: Florian Fainelli <florian@openwrt.org>
Cc: Mark Miesfeld <mmiesfeld@amcc.com>
Cc: Ashish Kalra <ashish.kalra@freescale.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-01-08 19:14:58 -05:00
Bartlomiej Zolnierkiewicz d63e94a442 pata_cs5536: forward port changes from cs5536
* Fix cable detection to also account for the slave device cable bit.

* Disable UDMA when programming MWDMA in cs5536_set_dmamode().

* Don't change UDMA settings in cs5536_set_piomode().

* Add cs5536_program_dtc() helper.

* Cleanup and uninline cs5536_[read,write]() methods.

Cc: Martin K. Petersen <mkp@mkp.net>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-01-08 19:14:58 -05:00
Sergei Shtylyov 002ae08448 libata-sff: use ATAPI_{COD|IO}
atapi_pio_bytes() uses bare numbers for the ATAPI interrupt reason bits despite
these are #define'd in <linux/ata.h>.

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-01-08 19:14:58 -05:00
Lin Ming 9ee4f39339 ata: add ata port runtime PM callbacks
Add ata port runtime suspend/resume/idle callbacks.
Set ->eh_noresume to skip the runtime PM calls on scsi host
in the error handler to avoid dead lock.

Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-01-08 19:14:58 -05:00
Lin Ming 5ef4108291 ata: add ata port system PM callbacks
Change ata_host_request_pm to ata_port_request_pm which performs
port suspend/resume.

Add ata port type driver which implements port PM callbacks.

Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-01-08 19:14:58 -05:00
Lin Ming 9a6d6a2dda ata: make ata port as parent device of scsi host
Currently, the device tree of ata port and scsi host looks as below,

        /sys/devices/pci0000:00/0000:00:1f.2    (ahci controller)
        |-- ata1                                (ata port)
        |-- host0                               (scsi host)
           |-- target0:0:0                      (scsi target)
               |-- 0:0:0:0                      (disk)

This patch makes ata port as parent device of scsi host, then it becomes

        /sys/devices/pci0000:00/0000:00:1f.2    (ahci controller)
        |-- ata1                                (ata port)
            |-- host0                           (scsi host)
                |-- target0:0:0                 (scsi target)
                    |-- 0:0:0:0                 (disk)

With this change, the ata port runtime PM is easier.
For example, the ata port runtime suspend will happen as,

disk suspend --> scsi target suspend --> scsi host suspend --> ata port
suspend.

Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-01-08 19:14:57 -05:00
Tejun Heo 7faa33da9b ahci: start engine only during soft/hard resets
This is another attempt at fixing the same problem that 270dac35c2
(libata: ahci_start_engine compliant to AHCI spec) tried to solve.
Unfortunately, 270dac35c2 created regressions for a lot more common
controllers and got reverted.

This specific AHCI IP block becomes a brick if the DMA engine is
started while DRQ is set.  It is not possible to avoid the condition
completely but the most common occurrence is caused by spurious use of
ahci_start_engine() from ahci_start_port() during init sequence.

DMA engine is started after both soft and hard resets and
ahci_start_port() is always followed by resets, so there is no reason
to start DMA engine from ahci_start_port().

This patch removes ahci_start_engine() invocation from
ahci_start_port().  This change makes failure path of
ahci_port_suspend() leave engine stopped without following resets.
This is resolved by replacing ahci_start_port() call with
ata_port_freeze() which forces resets afterwards, which is the better
behavior anyway.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Brian Norris <computersforpeace@gmail.com>
Reported-by: Jian Peng <jipeng2005@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-01-08 19:14:57 -05:00
Arnd Bergmann 40ba95fdf1 Merge branch 'depends/rmk/restart' into next/cleanup
Conflicts:
	arch/arm/mach-at91/at91cap9.c
	arch/arm/mach-at91/at91sam9260.c
	arch/arm/mach-at91/at91sam9261.c
	arch/arm/mach-at91/at91sam9263.c
	arch/arm/mach-at91/at91sam9g45.c
	arch/arm/mach-at91/at91sam9rl.c
	arch/arm/mach-exynos/cpu.c
	arch/arm/mach-shmobile/board-kota2.c

This resolves a bunch of conflicts between the arm-soc tree
and changes from the arm tree that have gone upstream.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-01-07 11:51:28 +00:00
David Miller 19d40dcabf pata_of_platform: Add missing CONFIG_OF_IRQ dependency.
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-12-22 15:00:32 -05:00
Andrew Lunn 63a9332b23 ARM: Orion: Get address map from plat-orion instead of via platform_data
Use an getter function in plat-orion/addr-map.c to get the address map
structure, rather than pass it to drivers in the platform_data
structures. When the drivers are built for none orion platforms, a
dummy function is provided instead which returns NULL.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Michael Walle <michael@walle.cc>
Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
2011-12-13 18:46:55 -05:00
Jean-Christophe PLAGNIOL-VILLARD 477c87e908 ARM: at91/pata: use gpio_is_valid to check the gpio
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2011-11-29 15:46:15 +00:00
Alexander Beregalov aab9440453 libata: fix build without BMDMA
fix these errors:
drivers/ata/libata-sff.c:2538:3: error: implicit declaration of function
'ata_pci_bmdma_prepare_host'
drivers/ata/libata-sff.c:2549:40: error: 'ata_bmdma_interrupt'
undeclared (first use in this function)

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-11-17 02:11:42 -05:00
Rob Herring ff95613500 [libata] ahci_platform: fix DT probing
The change in commit 904c04feaf "ahci_platform: Add the board_ids..."
doesn't work for the DT probing case as platform_get_device_id returns
NULL. Pick the default ahci_port_info in this case.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Anton Vorontsov <cbouatmailru@gmail.com>
Cc: Richard Zhu <richard.zhu@linaro.org>
Cc: linux-ide@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-11-17 02:10:49 -05:00
Anton Vorontsov 2d5fcc986d pata_of_platform: Don't use NO_IRQ
Drivers should not use NO_IRQ; moreover, some architectures don't
have it nowadays. '0' is the 'no irq' case.

Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-11-10 15:57:59 -05:00
Keng-Yu Lin c9703765f3 [libata] ahci: Add ASMedia ASM1061 support
Signed-off-by: Keng-Yu Lin <kengyu@canonical.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-11-09 01:47:36 -05:00
Gwendal Grignou 7a46c0780b [libata] Issue SRST to Sil3726 PMP
Reenable sending SRST to devices connected behind a Sil3726 PMP.
This allow staggered spinups and handles drives that spins up slowly.

While the drives spin up, the PMP will not accept SRST.
Most controller reissues the reset until the drive is ready, while
some [Sil3124] returns an error.
In ata_eh_error, wait 10s before reset the ATA port and try again.

Signed-off-by: Gwendal Grignou <gwendal@google.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-11-09 01:38:00 -05:00
Chris Dunlop 142924cf40 sata_sis.c: trivial spelling fix
Trivial spelling fix.

Signed-off-by: Chris Dunlop <chris@onthe.net.au>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-11-09 01:36:49 -05:00
JiSheng Zhang 003456145f ahci_platform: use dev_get_platdata()
Use dev_get_platdata() to retrieve the struct ahci_platform_data data
from the platform.

Signed-off-by: JiSheng Zhang <jszhang3@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-11-09 01:36:00 -05:00
Marcos Paulo de Souza 6d2dd05429 [libata] libata-scsi.c: Add function parameter documentation
Add the documentation of parameters of ata_change_queue_depth to silence the warning of make xmldocs

Signed-off-by: Marcos paulo de Souza <marcos.mage@gmail.com>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-11-09 01:32:27 -05:00
Linus Torvalds 32aaeffbd4 Merge branch 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux
* 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: (230 commits)
  Revert "tracing: Include module.h in define_trace.h"
  irq: don't put module.h into irq.h for tracking irqgen modules.
  bluetooth: macroize two small inlines to avoid module.h
  ip_vs.h: fix implicit use of module_get/module_put from module.h
  nf_conntrack.h: fix up fallout from implicit moduleparam.h presence
  include: replace linux/module.h with "struct module" wherever possible
  include: convert various register fcns to macros to avoid include chaining
  crypto.h: remove unused crypto_tfm_alg_modname() inline
  uwb.h: fix implicit use of asm/page.h for PAGE_SIZE
  pm_runtime.h: explicitly requires notifier.h
  linux/dmaengine.h: fix implicit use of bitmap.h and asm/page.h
  miscdevice.h: fix up implicit use of lists and types
  stop_machine.h: fix implicit use of smp.h for smp_processor_id
  of: fix implicit use of errno.h in include/linux/of.h
  of_platform.h: delete needless include <linux/module.h>
  acpi: remove module.h include from platform/aclinux.h
  miscdevice.h: delete unnecessary inclusion of module.h
  device_cgroup.h: delete needless include <linux/module.h>
  net: sch_generic remove redundant use of <linux/module.h>
  net: inet_timewait_sock doesnt need <linux/module.h>
  ...

Fix up trivial conflicts (other header files, and  removal of the ab3550 mfd driver) in
 - drivers/media/dvb/frontends/dibx000_common.c
 - drivers/media/video/{mt9m111.c,ov6650.c}
 - drivers/mfd/ab3550-core.c
 - include/linux/dmaengine.h
2011-11-06 19:44:47 -08:00
Rob Herring 02aac316ab ahci: add DT binding for Calxeda AHCI controller
Add devicetree match table to ahci platform driver for Calxeda Highbank
AHCI controller.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Cc: Jeff Garzik <jgarzik@pobox.com>
Cc: linux-ide@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: devicetree-discuss@lists.ozlabs.org
2011-11-03 15:52:38 -05:00
Paul Gortmaker bff7832dd6 ide/ata: Add module.h to the implicit modular users
A pending cleanup will mean that module.h won't be implicitly
everywhere anymore.  Make sure the modular drivers in the ide dir
are actually calling out for <module.h> explicitly in advance.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31 19:31:37 -04:00
Paul Gortmaker 38789fda29 ide/ata: Add export.h for EXPORT_SYMBOL/THIS_MODULE where needed
They were getting this implicitly by an include of module.h
from device.h -- but we are going to clean that up and break
that include chain, so include export.h explicitly now.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31 19:31:37 -04:00
Linus Torvalds ec7ae51753 Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (204 commits)
  [SCSI] qla4xxx: export address/port of connection (fix udev disk names)
  [SCSI] ipr: Fix BUG on adapter dump timeout
  [SCSI] megaraid_sas: Fix instance access in megasas_reset_timer
  [SCSI] hpsa: change confusing message to be more clear
  [SCSI] iscsi class: fix vlan configuration
  [SCSI] qla4xxx: fix data alignment and use nl helpers
  [SCSI] iscsi class: fix link local mispelling
  [SCSI] iscsi class: Replace iscsi_get_next_target_id with IDA
  [SCSI] aacraid: use lower snprintf() limit
  [SCSI] lpfc 8.3.27: Change driver version to 8.3.27
  [SCSI] lpfc 8.3.27: T10 additions for SLI4
  [SCSI] lpfc 8.3.27: Fix queue allocation failure recovery
  [SCSI] lpfc 8.3.27: Change algorithm for getting physical port name
  [SCSI] lpfc 8.3.27: Changed worst case mailbox timeout
  [SCSI] lpfc 8.3.27: Miscellanous logic and interface fixes
  [SCSI] megaraid_sas: Changelog and version update
  [SCSI] megaraid_sas: Add driver workaround for PERC5/1068 kdump kernel panic
  [SCSI] megaraid_sas: Add multiple MSI-X vector/multiple reply queue support
  [SCSI] megaraid_sas: Add support for MegaRAID 9360/9380 12GB/s controllers
  [SCSI] megaraid_sas: Clear FUSION_IN_RESET before enabling interrupts
  ...
2011-10-28 16:44:18 -07:00
Linus Torvalds ca90666287 Merge branch 'gpio' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm
* 'gpio' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm: (43 commits)
  ARM: 7135/1: ep93xx: bring back missing <mach/gpio.h>
  ARM: 7104/1: plat-pxa: break out GPIO driver specifics
  ARM: 7103/1: plat-pxa: move PXA GPIO driver to GPIO subsystem
  ARM: 7042/3: mach-ep93xx: break out GPIO driver specifics
  ARM: 7101/1: arm/tegra: Replace <mach/gpio.h> with <mach/gpio-tegra.h>
  ARM: 7094/1: arm/tegra: Move EN_VDD_1V05_GPIO to board-harmony.h
  ARM: 7083/1: rewrite U300 GPIO to use gpiolib
  ARM: 7074/1: gpio: davinci: eliminate unused variable warnings
  ARM: 7063/1: Orion: gpio: add missing include of linux/types.h
  ARM: 7055/1: arm/tegra: mach/gpio.h: include linux/types.h to fix build
  ARM: 7054/1: arm/tegra: Delete custom gpio_to_irq, and irq_to_gpio
  ARM: 7053/1: gpio/tegra: Implement gpio_chip.to_irq
  ARM: 7052/1: gpio/tegra: Remove use of irq_to_gpio
  ARM: 7057/1: mach-pnx4008: rename GPIO header
  ARM: 7056/1: plat-nomadik: kill off <plat/gpio.h>
  ARM: 7050/1: mach-sa1100: delete irq_to_gpio() function
  ARM: 7049/1: mach-sa1100: move SA1100 GPIO driver to GPIO subsystem
  ARM: 7045/1: mach-lpc32xx: break out GPIO driver specifics
  ARM: 7044/1: mach-lpc32xx: move LPC32XX GPIO driver to GPIO subsystem
  ARM: 7043/1: mach-ixp2000: rename GPIO header
  ...

Fix up trivial conflicts in arch/arm/mach-u300/Kconfig manually
2011-10-27 08:39:10 +02:00
Bartlomiej Zolnierkiewicz a0da19149f pata_efar: fix register naming used in efar_set_piomode()
Rename 'idetm_port' and 'idetm_data' variables to 'master_port'
and 'master_data' respectively to match register naming used in
efar_set_dmamode() and in ata_piix.c.

Fix efar_set_piomode() documentation while at it.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-10-14 13:38:40 -04:00
Bartlomiej Zolnierkiewicz 5a29854867 pata_rdc: add Power Management support
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-10-14 13:38:36 -04:00
Bartlomiej Zolnierkiewicz 6a94a746fb ata_piix: unify code for programming PIO and MWDMA timings
Besides making things noticably simpler it results in ~2% decrease in
the driver LOC count and also ~2% decrease in the driver binary size
(as measured on x86-32).

Fix piix_set_piomode() documentation while at it.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-10-14 13:37:36 -04:00
Bartlomiej Zolnierkiewicz ce986690d9 ata_piix: SITRE handling fix
Set SITRE (separate slave timing register) bit also in master-only
configurations to match other PIIX-alike drivers and make further
changes easier.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-10-14 13:37:32 -04:00
Bartlomiej Zolnierkiewicz 418fae2751 libata: make ata_sff_data_xfer_noirq() work with 32-bit PIO
Always use ata_sff_data_xfer32() in ata_sff_data_xfer_noirq()
so the latter can be also used for host controllers supporting
32-bit PIO operations.

It is a completely safe thing to do because if 32-bit PIO is
not supported or enabled ata_sff_data_xfer32() will fallback
to a standard method.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-10-14 13:37:31 -04:00
Bartlomiej Zolnierkiewicz 067f8c7b49 pata_artop: add Power Management support
Fixes IDE -> libata regression.

There shouldn't be any problems with it as corresponding IDE's host
driver (aec62xx) has been supporting PCI Power Management since
Oct 10 2008 (commit feb22b7f "ide: add proper PCI PM support (v2)")
and IDE PM since Jun 14 2003 (patch v2.5.73 "ide: Power Management").

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-10-14 13:32:54 -04:00
Bartlomiej Zolnierkiewicz 81452182be pata_sl82c105: add Power Management support
Fixes IDE -> libata regression.

There shouldn't be any problems with it as corresponding IDE's host
driver (sl82c105) has been supporting PCI Power Management since
Oct 10 2008 (commit feb22b7f "ide: add proper PCI PM support (v2)")
and IDE PM since Jun 14 2003 (patch v2.5.73 "ide: Power Management").

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-10-14 13:32:53 -04:00
Bartlomiej Zolnierkiewicz adacaf1449 pata_pdc2027x: add Power Management support
Fixes IDE -> libata regression.

There shouldn't be any problems with it as corresponding IDE's host
driver (pdc202xx_new) has been supporting PCI Power Management since
Oct 10 2008 (commit feb22b7f "ide: add proper PCI PM support (v2)")
and IDE PM since Jun 14 2003 (patch v2.5.73 "ide: Power Management").

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-10-14 13:32:52 -04:00
Bartlomiej Zolnierkiewicz b2f104bba3 pata_legacy: use PIO mask defines
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-10-14 13:27:23 -04:00
Bartlomiej Zolnierkiewicz 8c7e8f947f pata_legacy: unify QDI ->set_piomode methods
Add controller type field to struct legacy_data and then use it
to merge together all ->set_piomode methods for QDI controllers.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-10-14 13:27:03 -04:00
Bartlomiej Zolnierkiewicz 0dcd0a7637 libata: remove no longer needed pata_qdi driver
QDI65x0 controllers are fully supported by pata_legacy driver
so remove no longer needed pata_qdi driver.

Leave PATA_QDI config option for compatibility reasons and teach
pata_legacy to preserve the old behavior of pata_qdi driver.

Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-10-14 13:25:24 -04:00
Bartlomiej Zolnierkiewicz 4780c0b25e pata_it8213: fix register naming used in it8213_set_piomode()
Rename 'idetm_port' and 'idetm_data' variables to 'master_port'
and 'master_data' respectively to match register naming used in
it8213_set_dmamode() and in ata_piix.c.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-10-14 13:25:17 -04:00
Bartlomiej Zolnierkiewicz 11e872a3e1 pata_it8213: add UDMA100 and UDMA133 support
Fixes IDE -> libata regression.

IDE's it8213 host driver has been supporting those modes
(per official documentation) since the initial driver's merge
on Feb 7 2007 (commit 9c6712c0 "ide: add it8213 IDE driver").

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-10-14 13:25:13 -04:00
Bartlomiej Zolnierkiewicz bb612cba3a pata_rdc: parallel scanning needs an extra locking
This is similar change as commit 60c3be3 ("ata_piix: parallel scanning
on PATA needs an extra locking") for ata_piix host driver.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-10-14 13:25:10 -04:00
Bartlomiej Zolnierkiewicz d9d579842e pata_via: add via_fixup()
* Fix via_init_one() to enable clock on 66 MHz devices
  (bug introduced in commit 460f531 "pata_via: store UDMA masks
   in via_isa_bridges table").

* Factor out common code from via_[re]init_one() to via_fixup().

Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-10-14 13:22:54 -04:00
Bartlomiej Zolnierkiewicz bff00256f1 libata: ata_timing_compute() fixup
XFER_SW_DMA_0 mode should be excluded from the extended cycle timing
computations.

Acked-by: Alan Cox <alan@linux.intel.com>
Noticed-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-10-14 13:21:54 -04:00
Bartlomiej Zolnierkiewicz 9f8abf8248 pata_scc: add proper cable detection method
Use standard ata_cable_80wire() method for the cable detection,
as a bonus this allows us to use the default ->prereset method.

Acked-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp>
Acked-by: Akira Iguchi <akira2.iguchi@toshiba.co.jp>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-10-14 13:19:51 -04:00
Sergei Shtylyov 90f0adf093 pata_arasan_cf: remove bogus to_platform_device() calls
The suspend()/resume() methods already get the right 'struct device' to get the
driver data from -- there's no need to get to the 'struct platform_device' that
contains that 'struct device' just to call dev_get_drvdata()...

Acked-by: Viresh Kumar <viresh.kumar@st.com>
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-10-14 13:18:34 -04:00
Bartlomiej Zolnierkiewicz 46b9e77076 pata_atiixp: add proper ->prereset method
Fixes PCI access before PCI resources are allocated.

Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-10-14 13:16:49 -04:00
Bartlomiej Zolnierkiewicz d912be2f3b pata_serverworks: add serverworks_fixup()
Factor out common code from serverworks_[re]init_one() to
serverworks_fixup().

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-10-14 13:16:35 -04:00
Bartlomiej Zolnierkiewicz e69a70d951 pata_serverworks: cleanup cable detection
Merge identical cable routines for Dell and Sun systems into
common oem_cable() one.

Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-10-14 13:16:29 -04:00
Bartlomiej Zolnierkiewicz 5860a5545a pata_serverworks: use standard cable detection methods
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-10-14 13:15:54 -04:00
Bartlomiej Zolnierkiewicz 57242762e4 pata_cmd64x: documentation fix
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-10-14 13:10:46 -04:00
Bartlomiej Zolnierkiewicz 802872e7d7 pata_ali: fix "Satelite" typo
Cosmetic fix but thanks to it pata_ali's DMI table now matches
alim15x3's one.

Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-10-14 13:10:42 -04:00
Bartlomiej Zolnierkiewicz 73222c2ddf pata_cs5535: no need to program PIO0 timings during device init
Core libata code takes care of it nowadays.

Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-10-14 13:08:05 -04:00
Bartlomiej Zolnierkiewicz f4c6ae5020 pata_cmd64x: add cmd64x_fixup()
Factor out common code from cmd64x_[re]init_one() to cmd64x_fixup().

Remove stale comment and fix a minor CodingStyle issue while at it.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-10-14 13:07:52 -04:00
Bartlomiej Zolnierkiewicz dc5e44ec6f pata_hpt366: add hpt36x_find_mode() helper
Factor out code for finding the register programming information
from hpt366_set_mode() to hpt36x_find_mode().

This makes pata_hpt366 driver more similar to pata_{37x,3x2n} ones.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-10-14 13:07:18 -04:00
Bartlomiej Zolnierkiewicz f6b56696b9 pata_artop: unify ->prereset methods
* Unify ->prereset methods for ATP850 and ATP86x[R] chipsets.

* Fix ->prereset documentation while at it.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-10-14 13:06:56 -04:00
Bartlomiej Zolnierkiewicz d0dd4a016b pata_sc1200: do not use c99 style comments
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-10-14 13:01:42 -04:00
Sergei Shtylyov 8e3bfdb95a pata_at91: call clk_put() on ata_host_activate() failure
pata_at91_probe() forgets to call clk_put() iff ata_host_activate() fails...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-10-14 13:01:39 -04:00
Bartlomiej Zolnierkiewicz c203603360 libata: reduce ata_pci_[sff,bmdma]_init_one() size
Turn both helpers (which are used only during LLDs initialization
time and thus are not performance sensitive) into wrappers around
the new ata_pci_init_one() function, this cuts 20 LOC and saves
~1.1k of the output code size (x86-64):

 text    data     bss     dec     hex filename
  21392       0      19   21411    53a3 drivers/ata/libata-sff.o.before
  20256       0      19   20275    4f33 drivers/ata/libata-sff.o.after

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-10-14 13:01:17 -04:00
Bartlomiej Zolnierkiewicz e9f7cd51cc pata_cs5535: fix DRV_NAME
.. and also a module description while at it.

Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-10-14 12:59:51 -04:00
Bartlomiej Zolnierkiewicz 70f301a67d pata_sc1200: fix DRV_NAME
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-10-14 12:59:34 -04:00
Bartlomiej Zolnierkiewicz 7a113d3840 pata_sil680: minor CodingStyle fixups
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-10-14 12:46:45 -04:00
Bartlomiej Zolnierkiewicz 9b8ad4ac79 pata_sil680: constify tables
Constify tables in sil680_set_[pio,dma]mode().

Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-10-14 12:43:15 -04:00
Bartlomiej Zolnierkiewicz 6352187ee8 pata_sil680: documentation fixes
Fix documentation for sil680_sel[reg,dev]() and sil680_set_[pio,dma]mode().

Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-10-14 12:41:30 -04:00
Yong Zhang 6013995af6 ata: irq: Remove IRQF_DISABLED
Since commit [c58543c8: genirq: Run irq handlers with interrupts disabled],
We run all interrupt handlers with interrupts disabled
and we even check and yell when an interrupt handler
returns with interrupts enabled (see commit [b738a50a:
genirq: Warn when handler enables interrupts]).

So now this flag is a NOOP and can be removed.

Signed-off-by: Yong Zhang <yong.zhang0@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-10-08 00:07:16 -04:00
Pawel Moll 37210fbe1d ata: Make pata_of_platform.c compile again and work on non-PPC platforms
This patch adds missing #includes, makes the driver selectable on
non-PPC OF-enabled platforms and fixes property value accesses to
be correct in Little Endian system.

Cc: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Pawel Moll <pawel.moll@arm.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-10-08 00:07:16 -04:00
Dan McGee edc7d12ede pata_sis: code style cleanups for consistency
Remove a lot of '  ' (double spaces) as well as ensuring use of tabs vs.
spaces is appropriate and consistent.

Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-10-08 00:07:16 -04:00
Dan McGee c03a476dda pata_sis: mark most const data static as well
This pushes timing and other values into preinitialized read-only data
sections rather than being inlined into the code. None of these
functions are called more than a handful of times, so reducing code size
makes sense.

Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-10-08 00:07:16 -04:00
Dan McGee 14004f044b pata_sis: enable MWDMA for UDMA 133 chipset
This ports the timing values over from the old IDE driver into the new
PATA-based one. The comment was lying when it stated the old driver was
not MWDMA capable.

Boot tested on actual hardware using 'libata.force=mwdma2'.

Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-10-08 00:07:16 -04:00
Dan McGee f30f9a5e7b pata_sis: add mode_filter method for certain sis5513 chipsets
This mirrors a very old commit (3160d5416f, "sis5513: add
->udma_filter method for chipset_family >= ATA_133") to the old sis5513
IDE driver that prevents certain setups from working.

UDMA6 (ATA/133) is not supported on some chipsets and we need to ensure
this mode is not chosen even if a connected drive supports it. Port this
old patch forward to the new PATA driver to ensure UDMA5 is the highest
mode used if that is what is supported.

Kernel bugzilla #41582.

Reviewed-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-10-08 00:07:15 -04:00
Dan McGee 023a0175ad pata_sis: extract a sis_port_base() method
This is similar to the existing sis_old_port_base() method. We do this
same calculation and logic in multiple places (with one more to come in
a future patch), so extracting it into a method makes sense.

Reviewed-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-10-08 00:07:15 -04:00
Richard Zhu 904c04feaf [libata] ahci_platform: Add the board_ids and pi refer to different features
On imx53 AHCI, soft reset fails with IPMS set when PMP
is enabled but SATA HDD/ODD is connected to SATA port,
do soft reset again to port 0.
So the 'ahci_pmp_retry_srst_ops' is required when imx53
ahci is present.

Signed-off-by: Richard Zhu <richard.zhu@linaro.org>
Acked-by: Eric Miao <eric.miao@linaro.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-10-08 00:07:15 -04:00
Sergei Shtylyov e8411fbad6 libata-eh: ata_eh_followup_srst_needed() does not need 'classes' parameter
... since it does not use it.

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-10-08 00:07:15 -04:00
Joe Perches fc8cc1d5b1 sata_sil24: Use const
Reduce data by using const.

$ size drivers/ata/sata_sil24.o*
   text	   data	    bss	    dec	    hex	filename
  12764	    614	   2688	  16066	   3ec2	drivers/ata/sata_sil24.o.new
  12320	   1058	   2688	  16066	   3ec2	drivers/ata/sata_sil24.o.old

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-10-08 00:07:15 -04:00
Ming Lei 5e5a4f5d5a ata_piix: make DVD Drive recognisable on systems with Intel Sandybridge chipsets(v2)
This quirk patch fixes one kind of bug inside some Intel Sandybridge
chipsets, see reports from

       https://bugzilla.kernel.org/show_bug.cgi?id=40592.

Many guys also have reported the problem before:

	https://bugs.launchpad.net/bugs/737388
	https://bugs.launchpad.net/bugs/794642
	https://bugs.launchpad.net/bugs/782389
	......

With help from Tejun, the problem is found to be caused by 32bit PIO
mode, so introduce the quirk patch to disable 32bit PIO on SATA piix
for some Sandybridge CPT chipsets.

Seth also tested the patch on all five affected chipsets
(pci device ID: 0x1c00, 0x1c01, 0x1d00, 0x1e00, 0x1e01), and found
the patch does fix the problem.

Tested-by: Heasley, Seth <seth.heasley@intel.com>
Cc: Alan Cox <alan@linux.intel.com>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Acked-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Cc: stable@kernel.org
2011-10-07 23:46:37 -04:00
Tejun Heo 21dba24481 libata: clear PIO pad area
ata_sff_data_xfer[32]() use pad area if the transfer size isn't
multiple of transfer size; however, this area wasn't cleared and
garbage data in pad area could be transferred to the device.  Make
sure the pad area is cleared.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Lei Ming <tom.leiming@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-10-07 23:46:25 -04:00
Sergei Shtylyov d86619211e sata_mv: use {platform|pci}_get_drvdata()
The driver uses dev_get_drvdata() to get to the driver data for the
platform and PCI devices, while the corresponding wrappers exists for
them -- in one case it even declares an otherwise unneeded variable
to do that.  Switch to using the {platform|pci}_get_drvdata() instead.

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-10-07 23:46:20 -04:00
Sergei Shtylyov c00a4c9d24 sata_mv: release clock on ata_host_activate() failure
mv_platfrom_probe() forgets to call clk_disable() and clk_put() iff
ata_host_activate() fails...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-10-07 23:46:12 -04:00
Dan Williams f6e67035a9 [SCSI] libsas,libata: fix ->change_queue_{depth|type} for sata devices
Pass queue_depth change requests to libata, and prevent queue_type
changes for ATA devices.

Otherwise:
1/ we do not honor the libata specific restrictions on the queue depth
2/ libsas drivers that do not set sdev->tagged_supported are unable to
   change the queue_depth of ata devices via sysfs

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-10-02 12:30:30 -05:00
Julia Lawall a081da630d drivers/ata/sata_dwc_460ex.c: add missing kfree
Currently, error handling code in this function calls the function
sata_dwc_port_stop, but this function has essentially no effect if hsdevp
has not been stored in ap, which is the case throughout this function.  The
only effect is to print a debugging message including ap->print_id.

The code is rewritten to not call sata_dwc_port_stop, but instead to jump
to a local label that prints the original error message and the print_id
information.  In the case where hsdevp has been already allocated (but not
yet stored in ap), this value is freed as well.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@exists@
local idexpression x;
statement S,S1;
expression E;
identifier fl;
expression *ptr != NULL;
@@

x = \(kmalloc\|kzalloc\|kcalloc\)(...);
...
if (x == NULL) S
<... when != x
     when != if (...) { <+...kfree(x)...+> }
     when any
     when != true x == NULL
x->fl
...>
(
if (x == NULL) S1
|
if (...) { ... when != x
               when forall
(
 return \(0\|<+...x...+>\|ptr\);
|
* return ...;
)
}
)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2011-08-18 23:58:11 -04:00
Arnaud Patard (Rtp) e39c75cf3e ata: Add iMX pata support
Add basic support for pata on iMX. It has been tested only on imx51.
SDMA support will probably be added later so this version supports only
PIO.

v2:
  - enable only when needed IORDY
  - use dev_get_drvdata
v3:
  - add missing clk_put() calls
  - use platform_get_irq()
  - fix resume code to avoid disabling IORDY on resume
v4:
  - Remove EXPERIMENTAL and switch to depends on ARCH_MXC
  - Use devm_kzalloc()
  - make clock a must-have
  - Use only 1 ioremap

Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-08-18 23:57:58 -04:00
Tejun Heo 6d0e194d2e pata_via: disable ATAPI DMA on AVERATEC 3200
On AVERATEC 3200, pata_via causes memory corruption with ATAPI DMA,
which often leads to random kernel oops.  The cause of the problem is
not well understood yet and only small subset of machines using the
controller seem affected.  Blacklist ATAPI DMA on the machine.

Signed-off-by: Tejun Heo <tj@kernel.org>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=11426
Reported-and-tested-by: Jim Bray <jimsantelmo@gmail.com>
Cc: Alan Cox <alan@linux.intel.com>
Cc: stable@kernel.org
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2011-08-18 23:56:39 -04:00
Jeff Garzik ebd1699ec5 [libata] sata_sil: fix used-uninit warning
Init 'serror' to silence the following warning:

drivers/ata/sata_sil.c: In function ‘sil_interrupt’:
drivers/ata/sata_sil.c:453:14: warning: ‘serror’ may be used uninitialized in
this function [-Wuninitialized]

This is not a 'can never happen' but is nonetheless extremely unlikely.
The easiest and cleanest warning fix is simply to init the var,
rather than worry about marking the var uninit-ok.

Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-08-18 23:52:36 -04:00
Russell King 60e8972dc7 ARM: gpio: at91: convert drivers to use asm/gpio.h rather than mach/gpio.h
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-08-08 14:27:48 +01:00
Linus Torvalds c299eba3c5 Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (28 commits)
  ACPI:  delete stale reference in kernel-parameters.txt
  ACPI: add missing _OSI strings
  ACPI: remove NID_INVAL
  thermal: make THERMAL_HWMON implementation fully internal
  thermal: split hwmon lookup to a separate function
  thermal: hide CONFIG_THERMAL_HWMON
  ACPI print OSI(Linux) warning only once
  ACPI: DMI workaround for Asus A8N-SLI Premium and Asus A8N-SLI DELUX
  ACPI / Battery: propagate sysfs error in acpi_battery_add()
  ACPI / Battery: avoid acpi_battery_add() use-after-free
  ACPI: introduce "acpi_rsdp=" parameter for kdump
  ACPI: constify ops structs
  ACPI: fix CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS
  ACPI: fix 80 char overflow
  ACPI / Battery: Resolve the race condition in the sysfs_remove_battery()
  ACPI / Battery: Add the check before refresh sysfs in the battery_notify()
  ACPI / Battery: Add the hibernation process in the battery_notify()
  ACPI / Battery: Rename acpi_battery_quirks2 with acpi_battery_quirks
  ACPI / Battery: Change 16-bit signed negative battery current into correct value
  ACPI / Battery: Add the power unit macro
  ...
2011-08-02 21:17:02 -10:00
Rakib Mullick f35119d668 drivers: use kzalloc/kcalloc instead of 'kmalloc+memset', where possible
Signed-off-by: Rakib Mullick <rakib.mullick@gmail.com>
Cc: Jeff Garzik <jgarzik@pobox.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Tejun Heo <tj@kernel.org>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-25 20:57:13 -07:00
Randy Dunlap 3b5ec274da ata: PATA_ARASAN_CF depends on DMADEVICES
Fix kconfig unmet dependency warning:

warning: (PATA_ARASAN_CF && VIDEO_TIMBERDALE && SND_SOC_SH4_SIU) selects DMA_ENGINE which has unmet direct dependencies (DMADEVICES)

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Viresh Kumar <viresh.kumar@st.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2011-07-23 18:07:47 -04:00
Greg Dietsche 47db477e46 ata: remove unnecessary code
Compile tested.
remove unnecessary code that matches this coccinelle pattern
	if (...)
		return ret;
	return ret;

Signed-off-by: Greg Dietsche <Gregory.Dietsche@cuw.edu>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2011-07-23 18:07:27 -04:00
Gwendal Grignou d4d8eaff78 [libata] Prevent warning during PMP error recovery
Cleanup sff_pio_task_link when a command is cancel while the
pio_task thread has been scheduled.

Signed-off-by: Gwendal Grignou <gwendal@google.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2011-07-23 18:05:14 -04:00
Seth Heasley 2cab7a4c5c ahci: RAID-mode SATA patch for Intel Panther Point DeviceIDs
This patch adds an additional SATA RAID controller DeviceID for the Intel Panther Point PCH.

Signed-off-by: Seth Heasley <seth.heasley@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2011-07-23 18:04:32 -04:00
Jean Delvare 1c30c02757 pata_it821x: Fix RAID type display, by adding missing comma
The missing comma causes the wrong RAID type to be displayed.
Introduced by commit 963e4975c6 three
years ago, odd that nobody noticed before.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Jeff Garzik <jgarzik@pobox.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2011-07-23 18:04:25 -04:00
Vasiliy Kulikov 04e506b5e7 sata_dwc_460ex: fix error path
Fixed hsdev memleak on sata_dwc_probe() error.
As dma_dwc_exit() can be called multiple times without sata_dma_regs and
irq_dma changes, it might lead to double free on sequential
dma_dwc_exit() calls.  So, zero these fields after free calls.

Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2011-07-23 18:03:54 -04:00
Mark Nelson 3c4aa91f21 ahci: Enable SB600 64bit DMA on Asus M3A
Like e65cc194f7 this patch enables 64bit DMA
for the AHCI SATA controller of a board that has the SB600 southbridge. In
this case though we're enabling 64bit DMA for the Asus M3A motherboard. It
is a new enough board that all of the BIOS releases since the initial
release (0301 from 2007-10-22) work correctly with 64bit DMA enabled.

Signed-off-by: Mark Nelson <mdnelson8@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2011-07-23 18:03:16 -04:00
Tejun Heo 38941c9521 libata: report link resume failure as KERN_WARNING instead of ERR
Link resume failure in itself isn't an error condition and may happen
regularly depending on hardware configuration.  Reporting it as
KERN_ERR makes the condition unnecessarily prominent (e.g. reported
during boot).  Use KERN_WARNING instead.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: David Shaw <dshaw@jabberwocky.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2011-07-23 18:02:51 -04:00
Yuan-Hsin Chen 345347c5d7 ahci: move ahci_sb600_softreset to libahci.c and rename it
ahci_sb600_softreset was in ahci.c. This function is used
to fix soft reset failure and renames as ahci_pmp_retry_softreset
in libahci.c.

Signed-off-by: Yuan-Hsin Chen <yhchen@faraday-tech.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2011-07-23 17:57:36 -04:00
Tejun Heo 8ea7645c5a libata: leave port thawed after reset failure
libata EH intentionally left a port frozen if it failed
ata_eh_reset().  The intention was avoiding continuous loop of resets
when the controller or attached device is flaky and reporting spurious
hotplug events.  Once port enters this state, it can be recovered with
manual rescan, which seemed reasonable.

However, outside of my convoluted test setup, there have been very few
reports justifying this choice while there have been more cases where
the automatic freezing of the port after hotplug attempt of a faulty
device caused confusion and led to unnecessary resets.

This patch changes the behavior so that the port is thawed after reset
failure.  This change doesn't necessarily solve but makes it easier
and more intuitive to work around hotplug related problems
(ie. re-pluggin or power cycling the device) as reported in the
followings.

  https://bugzilla.kernel.org/show_bug.cgi?id=34712
  http://thread.gmane.org/gmane.linux.kernel/1123265/focus=49548

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Reartes Guillermo <rtguille@gmail.com>
Reported-by: Bruce Stenning <b.stenning@indigovision.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2011-07-23 17:57:36 -04:00
Joe Perches 5b933e6340 ata: sata_via: Use dev_dbg
Use normal debugging path for dynamic debug capability.

Convert dev_printk(KERN_DEBUG to dev_dbg(

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2011-07-23 17:57:36 -04:00
Joe Perches 06296a1e68 ata: Add and use ata_print_version_once
Use a single mechanism to show driver version.
Reduces text a tiny bit too.

Remove uses of static int printed_version
Add and use ata_print_version(const struct device *, const char *ver)
and ata_print_version_once.

$ size drivers/ata/built-in.*
   text	   data	    bss	    dec	    hex	filename
 544969	  73893	 116584	 735446	  b38d6	drivers/ata/built-in.allyesconfig.ata.o
 543870	  73893	 116592	 734355	  b34ad	drivers/ata/built-in.allyesconfig.print_once.o
 141328	  14689	   4220	 160237	  271ed	drivers/ata/built-in.defconfig.ata.o
 141212	  14689	   4220	 160121	  27179	drivers/ata/built-in.defconfig.print_once.o

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2011-07-23 17:57:36 -04:00
Joe Perches a9a79dfec2 ata: Convert ata_<foo>_printk(KERN_<LEVEL> to ata_<foo>_<level>
Saves text by removing nearly duplicated text format strings by
creating ata_<foo>_printk functions and printf extension %pV.

ata defconfig size shrinks ~5% (~8KB), allyesconfig ~2.5% (~13KB)

Format string duplication comes from:

 #define ata_link_printk(link, lv, fmt, args...) do { \
       if (sata_pmp_attached((link)->ap) || (link)->ap->slave_link)    \
               printk("%sata%u.%02u: "fmt, lv, (link)->ap->print_id,   \
                      (link)->pmp , ##args); \
       else \
               printk("%sata%u: "fmt, lv, (link)->ap->print_id , ##args); \
       } while(0)

Coalesce long formats.

$ size drivers/ata/built-in.*
   text	   data	    bss	    dec	    hex	filename
 544969	  73893	 116584	 735446	  b38d6	drivers/ata/built-in.allyesconfig.ata.o
 558429	  73893	 117864	 750186	  b726a	drivers/ata/built-in.allyesconfig.dev_level.o
 141328	  14689	   4220	 160237	  271ed	drivers/ata/built-in.defconfig.ata.o
 149567	  14689	   4220	 168476	  2921c	drivers/ata/built-in.defconfig.dev_level.o

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2011-07-23 17:57:36 -04:00
Joe Perches a44fec1fce ata: Convert dev_printk(KERN_<LEVEL> to dev_<level>(
Saves a bit of text as the call takes fewer args.

Coalesce a few formats.
Convert a few bare printks to pr_cont.

$ size drivers/ata/built-in.o*
   text	   data	    bss	    dec	    hex	filename
 558429	  73893	 117864	 750186	  b726a	drivers/ata/built-in.o.allyesconfig.new
 559574	  73893	 117888	 751355	  b76fb	drivers/ata/built-in.o.allyesconfig.old
 149567	  14689	   4220	 168476	  2921c	drivers/ata/built-in.o.defconfig.new
 149851	  14689	   4220	 168760	  29338	drivers/ata/built-in.o.defconfig.old

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2011-07-23 17:57:36 -04:00
Vasiliy Kulikov 9c8b04be44 ACPI: constify ops structs
Structs battery_file, acpi_dock_ops, file_operations,
thermal_cooling_device_ops, thermal_zone_device_ops, kernel_param_ops
are not changed in runtime.  It is safe to make them const.
register_hotplug_dock_device() was altered to take const "ops" argument
to respect acpi_dock_ops' const notion.

Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Acked-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2011-07-16 18:36:17 -04:00
Linus Torvalds 4974317055 ahci: change 'masking port_map' printk to KERN_WARNING level
It's not so much an error as a warning about normal Marvell crazines.
So don't use KERN_ERR that ends up spamming the console even in quiet
mode, it's not _that_ critical.

Explained by Jeff:

 "Long explanation, it's a mess:

  Marvell took standard AHCI, and bastardized it to include a weird mode
  whereby PATA devices appear inside the AHCI DMA and interrupt
  infrastructure you're familiar with.

  So, PATA devices appear via pata_marvell driver, using basic legacy
  IDE programming interface.  But SATA devices, which might also be
  attached to this chip, either work in under-performing mode or
  simply don't work at all (e.g.  newer 6 Gbps devices or port
  multiplier attachments, NCQ, ...)

  On the other hand, 'ahci' driver loads and works with the chip's
  attached SATA devices quite beautifully, but is completely unable to
  drive any attached PATA devices, due to the Marvell-specific
  PATA-under-AHCI interface.

  The "masking port_map 0x7 -> 0x3" message is the ahci driver "hiding"
  the PATA port(s) from itself, making sure it will only drive the SATA
  ports it knows how to drive."

Acked-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-06-29 10:10:07 -07:00
Paweł Drewniak f920fe1cb7 pata_marvell: Add support for 88SE91A0, 88SE91A4
This patch enables support for Marvell IDE PATA controllers found on
Asus P8P67LE motherboard.

The formatting has been corrected and I also received a report from two
users of this motherboard that the patch works.

Signed-off-by: Paweł Drewniak <czajernia@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-06-24 02:07:35 -04:00
Nishanth Aravamudan 3f1e046ad3 libata/sas: only set FROZEN flag if new EH is supported
On 16.06.2011 [08:28:39 -0500], Brian King wrote:
> On 06/16/2011 02:51 AM, Tejun Heo wrote:
> > On Wed, Jun 15, 2011 at 04:34:17PM -0700, Nishanth Aravamudan wrote:
> >>> That looks like the right thing to do. For ipr's usage of
> >>> libata, we don't have the concept of a port frozen state, so this flag
> >>> should really never get set. The alternate way to fix this would be to
> >>> only set ATA_PFLAG_FROZEN in ata_port_alloc if ap->ops->error_handler
> >>> is not NULL.
> >>
> >> It seemed like ipr is as you say, but I wasn't sure if it was
> >> appropriate to make the change above in the common libata-scis code or
> >> not. I don't want to break some other device on accident.
> >>
> >> Also, I tried your suggestion, but I don't think that can happen in
> >> ata_port_alloc? ata_port_alloc is allocated ap itself, and it seems like
> >> ap->ops typically gets set only after ata_port_alloc returns?
> >
> > Maybe we can test error_handler in ata_sas_port_start()?
>
> Good point. Since libsas is converted to the new eh now, we would need to have
> this test.

Commit 7b3a24c57d ("ahci: don't enable
port irq before handler is registered") caused a regression for CD-ROMs
attached to the IPR SATA bus on Power machines:

  ata_port_alloc: ENTER
  ata_port_probe: ata1: bus probe begin
  ata1.00: ata_dev_read_id: ENTER
  ata1.00: failed to IDENTIFY (I/O error, err_mask=0x40)
  ata1.00: ata_dev_read_id: ENTER
  ata1.00: failed to IDENTIFY (I/O error, err_mask=0x40)
  ata1.00: limiting speed to UDMA7:PIO5
  ata1.00: ata_dev_read_id: ENTER
  ata1.00: failed to IDENTIFY (I/O error, err_mask=0x40)
  ata1.00: disabled
  ata_port_probe: ata1: bus probe end
  scsi_alloc_sdev: Allocation failure during SCSI scanning, some SCSI devices might not be configured

The FROZEN flag added in that commit is only cleared by the new EH code,
which is not used by ipr. Clear this flag in the SAS code if we don't
support new EH.

Reported-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2011-06-23 16:41:26 -04:00
Tejun Heo cd691876d7 libata: apply NOSETXFER horkage to the affected Pioneer drives
regardless of firmware revision

It's unlikely NOSETXFER works for a revision of drive but doesn't for
another and pioneer doesn't seem to be fixing firmwares for the
affected drives.  Apply NOSETXFER to the affected pioneer drives
regardless of firmware revision.

  http://article.gmane.org/gmane.linux.ide/49734

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: fl-00@gmx.de
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2011-06-23 16:40:50 -04:00
Justin P. Mattock 8618ccd352 drivers/ata/sata_dwc_460ex: Fix typo 'corrresponding'
The patch below fixes a typo.

Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2011-06-23 16:40:28 -04:00
Tejun Heo 8c56cacc72 libata: fix unexpectedly frozen port after ata_eh_reset()
To work around controllers which can't properly plug events while
reset, ata_eh_reset() clears error states and ATA_PFLAG_EH_PENDING
after reset but before RESET is marked done.  As reset is the final
recovery action and full verification of devices including onlineness
and classfication match is done afterwards, this shouldn't lead to
lost devices or missed hotplug events.

Unfortunately, it forgot to thaw the port when clearing EH_PENDING, so
if the condition happens after resetting an empty port, the port could
be left frozen and EH will end without thawing it, making the port
unresponsive to further hotplug events.

Thaw if the port is frozen after clearing EH_PENDING.  This problem is
reported by Bruce Stenning in the following thread.

 http://thread.gmane.org/gmane.linux.kernel/1123265

stable: I think we should weather this patch a bit longer in -rcX
	before sending it to -stable.  Please wait at least a month
	after this patch makes upstream.  Thanks.

-v2: Fixed spelling in the comment per Dave Howorth.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Bruce Stenning <b.stenning@indigovision.com>
Cc: stable@kernel.org
Cc: Dave Howorth <dhoworth@mrc-lmb.cam.ac.uk>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2011-06-07 15:55:55 -04:00
Linus Torvalds 798ce8f1cc Merge branch 'for-2.6.40/core' of git://git.kernel.dk/linux-2.6-block
* 'for-2.6.40/core' of git://git.kernel.dk/linux-2.6-block: (40 commits)
  cfq-iosched: free cic_index if cfqd allocation fails
  cfq-iosched: remove unused 'group_changed' in cfq_service_tree_add()
  cfq-iosched: reduce bit operations in cfq_choose_req()
  cfq-iosched: algebraic simplification in cfq_prio_to_maxrq()
  blk-cgroup: Initialize ioc->cgroup_changed at ioc creation time
  block: move bd_set_size() above rescan_partitions() in __blkdev_get()
  block: call elv_bio_merged() when merged
  cfq-iosched: Make IO merge related stats per cpu
  cfq-iosched: Fix a memory leak of per cpu stats for root group
  backing-dev: Kill set but not used var in  bdi_debug_stats_show()
  block: get rid of on-stack plugging debug checks
  blk-throttle: Make no throttling rule group processing lockless
  blk-cgroup: Make cgroup stat reset path blkg->lock free for dispatch stats
  blk-cgroup: Make 64bit per cpu stats safe on 32bit arch
  blk-throttle: Make dispatch stats per cpu
  blk-throttle: Free up a group only after one rcu grace period
  blk-throttle: Use helper function to add root throtl group to lists
  blk-throttle: Introduce a helper function to fill in device details
  blk-throttle: Dynamically allocate root group
  blk-cgroup: Allow sleeping while dynamically allocating a group
  ...
2011-05-25 09:14:07 -07:00
Linus Torvalds f50d1d9e8d Merge git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6:
  pcmcia: Make struct pcmcia_device_id const, sound drivers edition
  staging: pcmcia: Convert pcmcia_device_id declarations to const
  pcmcia: Convert pcmcia_device_id declarations to const
  pcmcia: Make declaration and uses of struct pcmcia_device_id const
  pcmcia/sa1100: put sa11x0_pcmcia_hw_init[] to .devinit.data
2011-05-24 13:28:35 -07:00
Linus Torvalds 557eed6031 Merge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  libata: Power off empty ports
  libata-pmp: add support for Thermaltake BlackX Duet esata drive dock
  ATA: Don't powerdown Compaq Triflex IDE device on suspend
  libata: Use Maximum Write Same Length to report discard size limit
  drivers/ata/acard-ahci.c: fix enum warning
  pata_at91: SMC settings calculation bugfixes, support for t6z and IORDY
  libata-sff: prevent irq descriptions for dummy ports
  pata_cm64x: fix boot crash on parisc
2011-05-20 14:31:27 -07:00
Jens Axboe 698567f3fa Merge commit 'v2.6.39' into for-2.6.40/core
Since for-2.6.40/core was forked off the 2.6.39 devel tree, we've
had churn in the core area that makes it difficult to handle
patches for eg cfq or blk-throttle. Instead of requiring that they
be based in older versions with bugs that have been fixed later
in the rc cycle, merge in 2.6.39 final.

Also fixes up conflicts in the below files.

Conflicts:
	drivers/block/paride/pcd.c
	drivers/cdrom/viocd.c
	drivers/ide/ide-cd.c

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-20 20:33:15 +02:00
Kristen Carlson Accardi 8a745f1f39 libata: Power off empty ports
Give users the option of completely powering off unoccupied
SATA ports using the existing min_power link_power_management_policy
option.  When the use selects this option on an empty port, we
will power the port off by setting DET to off.  For occupied ports,
behavior is unchanged.

Signed-off-by: Kristen Carlson Accardi <kristen@linux.intel.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2011-05-19 20:50:53 -04:00
Pavel Herrmann 0afc6f5ba9 libata-pmp: add support for Thermaltake BlackX Duet esata drive dock
Some errors still show up, but the dock works, both drives can be
accessed at the same time

The chip maker and designation is unknown - possibly jmicron JMB350?

Signed-off-by: Pavel Herrmann <morpheus.ibis@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2011-05-19 20:48:59 -04:00
Mikulas Patocka bfeec8ca15 ATA: Don't powerdown Compaq Triflex IDE device on suspend
Don't powerdown Compaq Triflex IDE device on suspend

This fixes APM suspend on Compaq Armada 7400.
APM BIOS doesn't suspend if IDE is powered down when suspending.
The Triflex controller is found only on old Compaq boards,
so this patch will hopefully have no side effects.

Signed-off-by: Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2011-05-19 20:46:40 -04:00
Martin K. Petersen 5f4e206666 libata: Use Maximum Write Same Length to report discard size limit
Previously we used Maximum Unmap LBA Count in the Block Limits VPD to
signal the maximum number of sectors we could handle in a single Write
Same command.

Starting with SBC3r26 the Block Limits VPD has an explicit limit on the
number of blocks in a Write Same. This means we can stop abusing a field
related to the Unmap command and let our SAT use the proper value in the
VPD (Maximum Write Same Length).

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
Cc: stable@kernel.org
2011-05-19 20:46:01 -04:00
Jeff Garzik f68b3afe45 drivers/ata/acard-ahci.c: fix enum warning
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-05-19 20:45:15 -04:00
Linus Torvalds 9f6bd36c40 Merge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  libata: fix oops when LPM is used with PMP
2011-05-14 12:19:18 -07:00
Igor Plyatov 0144261fa6 pata_at91: SMC settings calculation bugfixes, support for t6z and IORDY
* New code correctly calculates SMC registers values, adjusts calculated
  to admissible ranges, enlarges cycles when required and converts values
  into SMC's format.
* Support for TDF cycles (ATA t6z) and IORDY line added.
* Eliminate need in the initial_timing structure.
* Code cleanup.

Signed-off-by: Igor Plyatov <plyatov@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2011-05-14 15:00:13 -04:00
James Bottomley af649a1b56 libata-sff: prevent irq descriptions for dummy ports
This is a cosmetic change to prevent libata-sff adding irq
descriptions to dummy ports, since the information, while largely
unused, is erroneous.

Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2011-05-14 14:59:54 -04:00
James Bottomley 9281b16caa pata_cm64x: fix boot crash on parisc
The old IDE cmd64x checks the status of the CNTRL register to see if
the ports are enabled before probing them.  pata_cmd64x doesn't do
this, which causes a HPMC on parisc when it tries to poke at the
secondary port because apparently the BAR isn't wired up (and a
non-responding piece of memory causes a HPMC).

Fix this by porting the CNTRL register port detection logic from IDE
cmd64x.  In addition, following converns from Alan Cox, add a check to
see if a mobility electronics bridge is the immediate parent and forgo
the check if it is (prevents problems on hotplug controllers).

Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2011-05-14 14:59:15 -04:00
Tejun Heo 5f6f12ccf3 libata: fix oops when LPM is used with PMP
ae01b2493c (libata: Implement ATA_FLAG_NO_DIPM and apply it to mcp65)
added ATA_FLAG_NO_DIPM and made ata_eh_set_lpm() check the flag.
However, @ap is NULL if @link points to a PMP link and thus the
unconditional @ap->flags dereference leads to the following oops.

  BUG: unable to handle kernel NULL pointer dereference at 0000000000000018
  IP: [<ffffffff813f98e1>] ata_eh_recover+0x9a1/0x1510
  ...
  Pid: 295, comm: scsi_eh_4 Tainted: P            2.6.38.5-core2 #1 System76, Inc. Serval Professional/Serval Professional
  RIP: 0010:[<ffffffff813f98e1>]  [<ffffffff813f98e1>] ata_eh_recover+0x9a1/0x1510
  RSP: 0018:ffff880132defbf0  EFLAGS: 00010246
  RAX: 0000000000000000 RBX: ffff880132f40000 RCX: 0000000000000000
  RDX: ffff88013377c000 RSI: ffff880132f40000 RDI: 0000000000000000
  RBP: ffff880132defce0 R08: ffff88013377dc58 R09: ffff880132defd98
  R10: 0000000000000000 R11: 00000000ffffffff R12: 0000000000000000
  R13: 0000000000000000 R14: ffff88013377c000 R15: 0000000000000000
  FS:  0000000000000000(0000) GS:ffff8800bf700000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
  CR2: 0000000000000018 CR3: 0000000001a03000 CR4: 00000000000406e0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
  Process scsi_eh_4 (pid: 295, threadinfo ffff880132dee000, task ffff880133b416c0)
  Stack:
   0000000000000000 ffff880132defcc0 0000000000000000 ffff880132f42738
   ffffffff813ee8f0 ffffffff813eefe0 ffff880132defd98 ffff88013377f190
   ffffffffa00b3e30 ffffffff813ef030 0000000032defc60 ffff880100000000
  Call Trace:
   [<ffffffff81400867>] sata_pmp_error_handler+0x607/0xc30
   [<ffffffffa00b273f>] ahci_error_handler+0x1f/0x70 [libahci]
   [<ffffffff813faade>] ata_scsi_error+0x5be/0x900
   [<ffffffff813cf724>] scsi_error_handler+0x124/0x650
   [<ffffffff810834b6>] kthread+0x96/0xa0
   [<ffffffff8100cd64>] kernel_thread_helper+0x4/0x10
  Code: 8b 95 70 ff ff ff b8 00 00 00 00 48 3b 9a 10 2e 00 00 48 0f 44 c2 48 89 85 70 ff ff ff 48 8b 8d 70 ff ff ff f6 83 69 02 00 00 01 <48> 8b 41 18 0f 85 48 01 00 00 48 85 c9 74 12 48 8b 51 08 48 83
  RIP  [<ffffffff813f98e1>] ata_eh_recover+0x9a1/0x1510
   RSP <ffff880132defbf0>
  CR2: 0000000000000018

Fix it by testing @link->ap->flags instead.

stable: ATA_FLAG_NO_DIPM was added during 2.6.39 cycle but was
        backported to 2.6.37 and 38.  This is a fix for that and thus
        also applicable to 2.6.37 and 38.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: "Nathan A. Mourey II" <nmoureyii@ne.rr.com>
LKML-Reference: <1304555277.2059.2.camel@localhost.localdomain>
Cc: Connor H <cmdkhh@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2011-05-14 14:51:40 -04:00
Tejun Heo 22fe9446e8 Revert "libata: ahci_start_engine compliant to AHCI spec"
This reverts commit 270dac35c2.

The commits causes command timeouts on AC plug/unplug.  It isn't yet
clear why.  As the commit was for a single rather obscure controller,
revert the change for now.

The problem was reported and bisected by Gu Rui in bug#34692.

 https://bugzilla.kernel.org/show_bug.cgi?id=34692

Also, reported by Rafael and Michael in the following thread.

 http://thread.gmane.org/gmane.linux.kernel/1138771

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Gu Rui <chaos.proton@gmail.com>
Reported-by: Rafael J. Wysocki <rjw@sisk.pl>
Reported-by: Michael Leun <lkml20100708@newton.leun.net>
Cc: Jian Peng <jipeng2005@gmail.com>
Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-14 10:45:59 -07:00
shaohua.li@intel.com 900e599eb0 SATA: enable non-queueable flush flag
Enable non-queueable flush flag for SATA.

Stable: 2.6.39 only

Cc: stable@kernel.org
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-06 11:36:25 -06:00
Joe Perches 25f8f54f6e pcmcia: Convert pcmcia_device_id declarations to const
Saves about 50KB of data.

Old/new size of all objects:
   text	   data	    bss	    dec	    hex	filename
 563015	  80096	 130684	 773795	  bcea3	(TOTALS)
 610916	  32256	 130632	 773804	  bceac	(TOTALS)

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Kurt Van Dijck <kurt.van.dijck@eia.be> (for drivers/net/can/softing/softing_cs.c)
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2011-05-06 07:46:22 +02:00
Jian Peng 270dac35c2 libata: ahci_start_engine compliant to AHCI spec
At the end of section 10.1 of AHCI spec (rev 1.3), it states

Software shall not set PxCMD.ST to 1 until it is determined that
a functoinal device is present on the port as determined by
PxTFD.STS.BSY=0, PxTFD.STS.DRQ=0 and PxSSTS.DET=3h

Even though most AHCI host controller works without this check,
specific controller will fail under this condition.

Signed-off-by: Jian Peng <jipeng2005@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2011-04-24 11:35:40 -04:00
Igor Plyatov 792d37af35 ata: pata_at91.c bugfix for initial_timing initialisation
The "struct ata_timing" must contain 10 members, but ".dmack_hold" member was
forgotten for "initial_timing" initialisation. This patch fixes such a problem.

Signed-off-by: Igor Plyatov <plyatov@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2011-04-24 11:34:06 -04:00
Igor Plyatov 9719b8f5bc ata: pata_at91.c bugfix for high master clock
The AT91SAM9 microcontrollers with master clock higher then 105 MHz
and PIO0, have overflow of the NCS_RD_PULSE value in the MSB. This
lead to "NCS_RD_PULSE" pulse longer then "NRD_CYCLE" pulse and driver
does not detect ATA device.

Signed-off-by: Igor Plyatov <plyatov@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2011-04-24 11:34:06 -04:00
Seth Heasley 181e3ceaba ahci: AHCI-mode SATA patch for Intel Panther Point DeviceIDs
The previously submitted patch was word-wrapped.

This patch adds the AHCI-mode SATA DeviceIDs for the Intel Panther Point PCH.

Signed-off-by: Seth Heasley <seth.heasley@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2011-04-24 11:34:05 -04:00
Seth Heasley 4a836c701a ata_piix: IDE-mode SATA patch for Intel Panther Point DeviceIDs
The previously submitted patch was word-wrapped.

This patch adds the IDE-mode SATA DeviceIDs for the Intel Panther
Point PCH.

Signed-off-by: Seth Heasley <seth.heasley@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2011-04-24 11:34:05 -04:00
Jeff Mahoney d69cf28cd2 libata: Pioneer DVR-216D can't do SETXFER
Commit 4a5610a04d fixed an issue with
 the Pioneer DVR-212D not handling SETXFER correctly. An openSUSE user
 reported a similar issue with his DVR-216D that the NOSETXFER horkage
 worked around for him as well.

 This patch adds the DVR-216D (1.08) to the horkage list for NOSETXFER.

 The issue was reported at:
 https://bugzilla.novell.com/show_bug.cgi?id=679143

Reported-by: Volodymyr Kyrychenko <vladimir.kirichenko@gmail.com>
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2011-04-24 11:34:05 -04:00
Maxime Bizon 7b3a24c57d ahci: don't enable port irq before handler is registered
The ahci_pmp_attach() & ahci_pmp_detach() unmask port irqs, but they
are also called during port initialization, before ahci host irq
handler is registered. On ce4100 platform, this sometimes triggers
"irq 4: nobody cared" message when loading driver.

Fixed this by not touching the register if the port is in frozen
state, and mark all uninitialized port as frozen.

Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: stable@kernel.org
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2011-04-24 11:34:05 -04:00
Tejun Heo ae01b2493c libata: Implement ATA_FLAG_NO_DIPM and apply it to mcp65
NVIDIA mcp65 familiy of controllers cause command timeouts when DIPM
is used.  Implement ATA_FLAG_NO_DIPM and apply it.

This problem was reported by Stefan Bader in the following thread.

 http://thread.gmane.org/gmane.linux.ide/48841

stable: applicable to 2.6.37 and 38.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Stefan Bader <stefan.bader@canonical.com>
Cc: stable@kernel.org
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2011-04-24 11:32:16 -04:00
Hannes Reinecke 6e5fe5b12c ahci: EM supported message type sysfs attribute
This patch adds an sysfs attribute 'em_message_supported' to the
ahci host device which prints out the supported enclosure management
message types.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2011-04-24 11:31:31 -04:00
Lucas De Marchi 25985edced Fix common misspellings
Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31 11:26:23 -03:00
Linus Torvalds 85eb1513c1 Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (65 commits)
  ARM: 6826/1: Merge v6 and v7 DEBUG_LL DCC support
  ARM: 6838/1: etm: fix section mismatch warning
  ARM: 6837/1: remove unused pci_fixup_prpmc1100
  ARM: 6836/1: kprobes/fix emulation of LDR/STR instruction when Rn == PC
  Fix the broken build for Marvell Dove platform.
  ARM: 6835/1: perf: ensure overflows aren't missed due to IRQ latency
  ARM: 6834/1: perf: reset counters on all CPUs during initialisation
  ARM: 6833/1: perf: add required isbs() to ARMv7 backend
  ARM: 6825/1: kernel/sleep.S: fix Thumb2 compilation issues
  ARM: 6807/1: realview: Fix secondary GIC initialisation for EB with MPCore tile
  arm: mach-mx3: pcm043: add write-protect and card-detect for SD1
  eukrea_mbimxsd51: add SD Card detect
  eukrea_mbimxsd25-baseboard: add SD card detect
  mx3/eukrea_mbimxsd-baseboard: add SD card detect support
  mx3/eukrea_mbimxsd-baseboard: fix gpio request
  ARM: mxs/mx28evk: add mmc device
  ARM: mxs/mx23evk: add mmc device
  ARM: mxs: dynamically allocate mmc device
  ARM: mx51_efika: update platform data for new mfd changes
  mx2/iomux: Set direction for CSPI2 pins
  ...
2011-03-30 07:50:45 -07:00