Commit Graph

31 Commits

Author SHA1 Message Date
Hendrik Brueckner 8e6a828566 s390/s390dbf: use debug_level_enabled() where applicable
Refactor direct debug level comparisons with the (internal) s390db->level
member.  Use the debug_level_enabled() function instead.

Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-10-24 17:16:54 +02:00
Steffen Maier cb45214960 [SCSI] zfcp: Do not wakeup while suspended
If the mapping of FCP device bus ID and corresponding subchannel
is modified while the Linux image is suspended, the resume of FCP
devices can fail. During resume, zfcp gets callbacks from cio regarding
the modified subchannels but they can be arbitrarily mixed with the
restore/resume callback. Since the cio callbacks would trigger
adapter recovery, zfcp could wakeup before the resume callback.
Therefore, ignore the cio callbacks regarding subchannels while
being suspended. We can safely do so, since zfcp does not deal itself
with subchannels. For problem determination purposes, we still trace the
ignored callback events.

The following kernel messages could be seen on resume:

kernel: <WWPN>: parent <FCP device bus ID> should not be sleeping

As part of adapter reopen recovery, zfcp performs auto port scanning
which can erroneously try to register new remote ports with
scsi_transport_fc and the device core code complains about the parent
(adapter) still sleeping.

kernel: zfcp.3dff9c: <FCP device bus ID>:\
 Setting up the QDIO connection to the FCP adapter failed
<last kernel message repeated 3 more times>
kernel: zfcp.574d43: <FCP device bus ID>:\
 ERP cannot recover an error on the FCP device

In such cases, the adapter gave up recovery and remained blocked along
with its child objects: remote ports and LUNs/scsi devices. Even the
adapter shutdown as part of giving up recovery failed because the ccw
device state remained disconnected. Later, the corresponding remote
ports ran into dev_loss_tmo. As a result, the LUNs were erroneously
not available again after resume.

Even a manually triggered adapter recovery (e.g. sysfs attribute
failed, or device offline/online via sysfs) could not recover the
adapter due to the remaining disconnected state of the corresponding
ccw device.

Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com>
Cc: <stable@vger.kernel.org> #2.6.32+
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-09-24 12:11:01 +04:00
Swen Schillig ea4a3a6ac4 [SCSI] zfcp: Redesign of the debug tracing final cleanup.
This patch is the final cleanup of the redesign from the zfcp tracing.
Structures and elements which were used by multiple areas of the
former debug tracing are now changed to the new scheme.

Signed-off-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-21 12:24:46 -06:00
Swen Schillig 250a1352b9 [SCSI] zfcp: Redesign of the debug tracing for SCSI records.
This patch is the continuation to redesign the zfcp tracing to a more
straight-forward and easy to extend scheme.

This patch deals with all trace records of the zfcp SCSI area.

Signed-off-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-21 12:24:46 -06:00
Swen Schillig a54ca0f62f [SCSI] zfcp: Redesign of the debug tracing for HBA records.
This patch is the continuation to redesign the zfcp tracing to a more
straight-forward and easy to extend scheme.

This patch deals with all trace records of the zfcp HBA area.

Signed-off-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-21 12:24:45 -06:00
Swen Schillig 2c55b750a8 [SCSI] zfcp: Redesign of the debug tracing for SAN records.
This patch is the continuation to redesign the zfcp tracing to a more
straight-forward and easy to extend scheme.

This patch deals with all trace records of the zfcp SAN area.

Signed-off-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-21 12:24:45 -06:00
Swen Schillig ae0904f60f [SCSI] zfcp: Redesign of the debug tracing for recovery actions.
The tracing environment of the zfcp LLD has become very bulky and hard
to maintain. Small changes involve a large modification process which
is error-prone and not effective.  This patch is the first of a set to
redesign the zfcp tracing to a more straight-forward and easy to
extend scheme.  It removes all interpretation and visualization parts
and focuses on bare logging of the information.

This patch deals with all trace records of the zfcp error recovery.

Signed-off-by: Swen schillig <swen@vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-21 12:24:44 -06:00
Christof Schmitt bf5eefb007 [SCSI] zfcp: Remove scsi_cmnd->serial_number from debug traces
With the change that drivers have to explicitly request the serial
number for SCSI commands, this field should not be part of the zfcp
traces. It is not worth the effort to request the serial number only
for tracing purposes, so simply remove this field from the debug
traces.

Reviewed-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-07 17:25:26 -05:00
Christof Schmitt b62a8d9b45 [SCSI] zfcp: Use SCSI device data zfcp_scsi_dev instead of zfcp_unit
This is the large change to switch from using the data in
zfcp_unit to zfcp_scsi_dev. Keeping everything working requires doing
the switch in one piece. To ensure that no code keeps using the data
in zfcp_unit, this patch also removes the data from zfcp_unit that is
now being replaced with zfcp_scsi_dev.

For zfcp, the scsi_device together with zfcp_scsi_dev exist from the
call of slave_alloc to the call of slave_destroy. The data in
zfcp_scsi_dev is initialized in zfcp_scsi_slave_alloc and the LUN is
opened; the final shutdown for the LUN is run from slave_destroy.

Where the scsi_device or zfcp_scsi_dev is needed, the pointer to the
scsi_device is passed as function argument and inside the function
converted to the pointer to zfcp_scsi_dev; this avoids back and forth
conversion betweeen scsi_device and zfcp_scsi_dev.

While changing the function arguments from zfcp_unit to scsi_device,
the functions names are renamed form "unit" to "lun". This is to have
a seperation between zfcp_scsi_dev/LUN and the zfcp_unit; only code
referring to the remaining configuration information in zfcp_unit
struct uses "unit".

Reviewed-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-09-16 22:54:17 -04:00
Felix Beck ef3eb71d8b [SCSI] zfcp: Introduce experimental support for DIF/DIX
Introduce support for DIF/DIX in zfcp: Report the capabilities for the
Scsi_host, map the protection data when issuing I/O requests and
handle the new error codes. Also add the fsf data_direction field to
the hba trace, it is useful information for debugging in that area.
This is an EXPERIMENTAL feature for now.

Signed-off-by: Felix Beck <felix.beck@de.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-28 09:48:56 -05:00
Christof Schmitt ab72528a44 [SCSI] zfcp: Move scsi result tracing decision to zfcp_dbf.h
Move the decision which trace tag and trace level to use for the scsi
result trace to zfcp_dbf.h. zfcp_dbf_scsi_result is already an inline
function, so move the trace code there, simplifying the response
handling in zfcp_fsf.c.

Reviewed-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-17 17:46:31 -06:00
Christof Schmitt d21e9daa63 [SCSI] zfcp: Dont use 0 to indicate invalid LUN in rec trace
0 is a valid value for a LUN. It is slightly confusing to also see 0
in the trace entries relating to adapter and port. Change this to use
0xFFFFFFFFFFFFFFFF in the LUN field when the trace entry does not
relate to a LUN or unit.

Reviewed-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-17 17:46:27 -06:00
Christof Schmitt 67feeebaa7 [SCSI] zfcp: Remove unused payload field from zfcp_dbf_san_record
Remove the unused payload field from the struct zfcp_dbf_san_record,
saving some space in the SAN trace.

Reviewed-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-17 17:46:22 -06:00
Christof Schmitt 7c7dc19681 [SCSI] zfcp: Simplify handling of ct and els requests
Remove some redundancies in FC related code and trace:
- drop redundant data from SAN trace (local s_id that only changes
  during link down, ls_code that is already part of payload, d_id in
  ct response trace that is always the same as in ct request trace)
- use one common fsf struct to hold zfcp data for ct and els requests
- leverage common fsf struct for FC passthrough job data, allocate it
  with dd_bsg_data for passthrough requests and unify common code for
  ct and els passthrough request
- simplify callback handling in zfcp_fc

Reviewed-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-04 12:02:15 -06:00
Christof Schmitt 4318e08c84 [SCSI] zfcp: Update FCP protocol related code
Use common data structures for FCP CMND, FCP RSP and related
definitions and remove zfcp private definitions. Split the FCP CMND
setup and FCP RSP evaluation code in seperate functions. Use inline
functions to not negatively impact the I/O path.

Reviewed-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-04 12:02:10 -06:00
Swen Schillig 5771710bd5 [SCSI] zfcp: Update dbf calls
Change the dbf data and functions to use the zfcp_dbf prefix
throughout the code. Also change the calls to dbf to use zfcp_dbf
instead of zfcp_adapter.

Signed-off-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-05 08:49:30 -05:00
Christof Schmitt 2e261af84c [SCSI] zfcp: Only collect FSF/HBA debug data for matching trace levels
The default trace level is to only trace failed FSF commands. Thus it
is not necessary to collect trace data for most FSF commands, since
it will be thrown away later. Restructure the FSF/HBA trace
infrastructure to first check the trace level in a inline function and
only do the expensive data collection for matching trace levels.

Reviewed-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-05 08:49:10 -05:00
Christof Schmitt dcd20e2316 [SCSI] zfcp: Only collect SCSI debug data for matching trace levels
The default trace level is to only trace failed SCSI commands. Thus it
is not necessary to collect trace data for most SCSI commands since it
will be thrown away later. Restructure the SCSI trace infrastructure
to first check the trace level in a inline function and only do the
expensive data collection for matching trace levels.

Reviewed-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-05 08:49:08 -05:00
Christof Schmitt d46f384a89 [SCSI] zfcp: Move debug data from zfcp_data to own data structure
The struct zfcp_adapter includes everything related to the debug
traces. This introduces dependences between the definitions in
zfcp_def.h and zfcp_dbf.h. Move all debug related data structures to a
new data structure to break those dependencies and manage the debug
data in zfcp_dbf.[hc].

Reviewed-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-05 08:49:06 -05:00
Swen Schillig 5ffd51a5e4 [SCSI] zfcp: replace current ERP logging with a more convenient version
The current number based id ERP logging is replaced by a string
based tag version. The benefit is an easier location of the code in
question and the removal of the lengthy array referencing the
individual messages.
The string (7 bytes) based version does not use more space since those
bytes were "used" anyway due to the alignment of the structure.
The encoding of the 7 byte string is as follows
        [0-1] = filename
        [2-5] = task/function
        [6]   = section
Due to the character of this string (fixed length) a string
termination is not required here.

Signed-off-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-12 12:58:20 -05:00
Christof Schmitt 39eb7e9aca [SCSI] zfcp: Add support for unchained FSF requests
Add the support to send CT and ELS requests as unchained FSF requests. This is
required for older hardware and was somehow omitted during the cleanup of the
FSF layer. The req_count and resp_count attributes are unused, so remove them
instead of adding a special case for setting them. Also add debug data and a
warning, when the ct request hits a limit.

Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Acked-by: Martin Petermann <martin@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-12-29 11:38:28 -06:00
Christof Schmitt d94ce6c6e9 [SCSI] zfcp: Fix hexdump data in s390dbf traces
Fix multiple problems found in the hexdump data:
 - length calculation was wrong, traces were incomplete
 - FC payloads were dumped in different record than the output
   function tried to read
 - minor fixes in output
 - allow complete RSCN traces (up to 1024 bytes according to spec)

Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-11-05 12:47:55 -05:00
Swen Schillig 5706938669 [SCSI] zfcp: put threshold data in hba trace
Now that we removed the long messages for the bit error threshold
data, put the data in the hba trace. This way, we get a short warning
for the threshold event from the hardware and have the data in the
trace for further analysis.

Signed-off-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-03 12:11:55 -05:00
Jan Glauber 779e6e1c72 [S390] qdio: new qdio driver.
List of major changes:
- split qdio driver into several files
- seperation of thin interrupt code
- improved handling for multiple thin interrupt devices
- inbound and outbound processing now always runs in tasklet context
- significant less tasklet schedules per interrupt needed
- merged qebsm with non-qebsm handling
- cleanup qdio interface and added kerneldoc
- coding style

Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Utz Bacher <utz.bacher@de.ibm.com>
Reviewed-by: Ursula Braun <braunu@de.ibm.com>
Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2008-07-17 17:22:10 +02:00
Martin Peschke 7337891f38 [SCSI] zfcp: remove some __attribute__ ((packed))
There is no need to pack data structures which describe the
contents of records in the new recovery trace.

lcrash currently depends on the binary format for the other traces,
removing the packed attribute from all traces would break trace
debugging with lcrash.

Signed-off-by: Martin Peschke <mp3@de.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-06-05 09:27:15 -05:00
Martin Peschke c3baa9a26c [SCSI] zfcp: Add information about interrupt to trace.
Store the index of the buffer in the inbound queue used to report
request completion in trace record for request coompletion.
This piece of information allows to better compare qdio and zfcp traces.

Signed-off-by: Martin Peschke <mp3@de.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-06-05 09:27:15 -05:00
Martin Peschke e891bffe92 [SCSI] zfcp: Rename sbal_curr to sbal_last.
sbal_last is more appropriate, because it matches sbal_first.

Signed-off-by: Martin Peschke <mp3@de.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-06-05 09:27:14 -05:00
Martin Peschke 0f83b110f0 [SCSI] zfcp: Remove field sbal_last from trace record.
This field is not needed, because it designates an index with a fix offset
from sbal_first. It's name is confusing anyway.

Signed-off-by: Martin Peschke <mp3@de.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-06-05 09:27:14 -05:00
Martin Peschke ee95a16d39 [SCSI] zfcp: fix compiler warning caused by poking inside new semaphore (linux-next)
as seen in linux-next tree:

drivers/s390/scsi/zfcp_dbf.c: In function ‘zfcp_rec_dbf_event_thread’:
drivers/s390/scsi/zfcp_dbf.c:697: warning: passing argument 1 of ‘atomic_read’
 from incompatible pointer type

Caused by recent git commit:

commit 348447e857
Author: Martin Peschke <mp3@de.ibm.com>
Date:   Thu Mar 27 14:22:01 2008 +0100

    [SCSI] zfcp: Add trace records for recovery thread and its queues

We are not supposed to poke inside semaphore.

Signed-off-by: Martin Peschke <mp3@de.ibm.com>
Acked-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-17 12:56:49 -05:00
Martin Peschke 6bc473dd32 [SCSI] zfcp: Shorten excessive names in debug trace.
Saving on line breaks, improving readability, by shortening excessive
function names and identifiers, by simplifying some functions call
chains, and by simplifying nesting of some data structure.

Signed-off-by: Martin Peschke <mp3@de.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 12:19:10 -05:00
Christof Schmitt 2b604c9b90 [SCSI] zfcp: Move DBF definitions to private header file
Unclutter the global zfcp_def.h header. Move everything required to
call into the debug feature to a new header file.

Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: Martin Peschke <mp3@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 12:19:09 -05:00