Commit Graph

805 Commits

Author SHA1 Message Date
Rafael J. Wysocki bf7c5449e6 ARM / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
After commit b2b49ccbdd (PM: Kconfig: Set PM_RUNTIME if PM_SLEEP is
selected) PM_RUNTIME is always set if PM is set, so #ifdef blocks
depending on CONFIG_PM_RUNTIME may now be changed to depend on
CONFIG_PM.

Replace CONFIG_PM_RUNTIME with CONFIG_PM everywhere in the code under
arch/arm/ (the defconfig files will be modified later).

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Nishanth Menon <nm@ti.com>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Acked-by: Santosh Shilimkar <ssantosh@kernel.org>
2014-12-13 00:42:49 +01:00
Linus Torvalds 44c916d58b ARM: SoC cleanups for 3.17
This merge window brings a good size of cleanups on various
 platforms. Among the bigger ones:
 
 * Removal of Samsung s5pc100 and s5p64xx platforms. Both of these have
   lacked active support for quite a while, and after asking around nobody
   showed interest in keeping them around. If needed, they could be
   resurrected in the future but it's more likely that we would prefer
   reintroduction of them as DT and multiplatform-enabled platforms
   instead.
 * OMAP4 controller code register define diet. They defined a lot of registers
   that were never actually used, etc.
 * Move of some of the Tegra platform code (PMC, APBIO, fuse, powergate)
   to drivers/soc so it can be shared with 64-bit code. This also converts them
   over to traditional driver models where possible.
 * Removal of legacy gpio-samsung driver, since the last users have been
   removed (moved to pinctrl)
 
 Plus a bunch of smaller changes for various platforms that sort of
 dissapear in the diffstat for the above. clps711x cleanups, shmobile
 header file refactoring/moves for multiplatform friendliness, some misc
 cleanups, etc.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJT5DYPAAoJEIwa5zzehBx37egQAIiatNiLLqZnfo3rwGADRz/a
 POfPovktj68aPcobyzoyhFtToMqGvi9PpysyFTIQD2HJFG+5BtiIAuqtg0875zDe
 EpBWgsfugrm0YktJWAtUerj60oAmNPbKfaEm1cOOWuM2lb2mV+QkRrwSTAgsqkT7
 927BzMXKKBRPOVLL0RYhoF8EXa0Eg8kCqAHP8fJrzVYkRp+UrZJDnGiUP1XmWJN+
 VXQMu5SEjcPMtqT7+tfX455RfREHJfBcJ1ZN/dPF8HMWDwClQG0lyc6hifh1MxwO
 8DjIZNkfZeKqgDqVyC17re7pc7p8md5HL8WXbrKpK0A9vQ5bRexbPHxcwJ1T/C2Y
 465H+st5XXbuzV1gbMwjK1/ycsH0tCyffckk8Yl/2e1Fs7GgPNbAELtTdl+5vV1Y
 xmDXkyo/9WlRM3LQ23IGKwW7VzN86EfWVuShssfro0fO7xDdb4OOYLdQI+4bCG+h
 ytQYun1vU32OEyNik5RVNQuZaMrv2c93a3bID4owwuPHPmYOPVUQaqnRX/0E51eA
 aHZYbk2GlUOV3Kq5aSS4iyLg1Yj+I9/NeH9U+A4nc+PQ5FlgGToaVSCuYuw4DqbP
 AAG+sqQHbkBMvDPobQz/yd1qZbAb4eLhGy11XK1t5S65rApWI55GwNXnvbyxqt8x
 wpmxJTASGxcfuZZgKXm7
 =gbcE
 -----END PGP SIGNATURE-----

Merge tag 'cleanup-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC cleanups from Olof Johansson:
 "This merge window brings a good size of cleanups on various platforms.
  Among the bigger ones:

   - Removal of Samsung s5pc100 and s5p64xx platforms.  Both of these
     have lacked active support for quite a while, and after asking
     around nobody showed interest in keeping them around.  If needed,
     they could be resurrected in the future but it's more likely that
     we would prefer reintroduction of them as DT and
     multiplatform-enabled platforms instead.

   - OMAP4 controller code register define diet.  They defined a lot of
     registers that were never actually used, etc.

   - Move of some of the Tegra platform code (PMC, APBIO, fuse,
     powergate) to drivers/soc so it can be shared with 64-bit code.
     This also converts them over to traditional driver models where
     possible.

   - Removal of legacy gpio-samsung driver, since the last users have
     been removed (moved to pinctrl)

  Plus a bunch of smaller changes for various platforms that sort of
  dissapear in the diffstat for the above.  clps711x cleanups, shmobile
  header file refactoring/moves for multiplatform friendliness, some
  misc cleanups, etc"

* tag 'cleanup-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (117 commits)
  drivers: CCI: Correct use of ! and &
  video: clcd-versatile: Depend on ARM
  video: fix up versatile CLCD helper move
  MAINTAINERS: Add sdhci-st file to ARCH/STI architecture
  ARM: EXYNOS: Fix build breakge with PM_SLEEP=n
  MAINTAINERS: Remove Kirkwood
  ARM: tegra: Convert PMC to a driver
  soc/tegra: fuse: Set up in early initcall
  ARM: tegra: Always lock the CPU reset vector
  ARM: tegra: Setup CPU hotplug in a pure initcall
  soc/tegra: Implement runtime check for Tegra SoCs
  soc/tegra: fuse: fix dummy functions
  soc/tegra: fuse: move APB DMA into Tegra20 fuse driver
  soc/tegra: Add efuse and apbmisc bindings
  soc/tegra: Add efuse driver for Tegra
  ARM: tegra: move fuse exports to soc/tegra/fuse.h
  ARM: tegra: export apb dma readl/writel
  ARM: tegra: Use a function to get the chip ID
  ARM: tegra: Sort includes alphabetically
  ARM: tegra: Move includes to include/soc/tegra
  ...
2014-08-08 11:00:26 -07:00
Uwe Kleine-König c6f54a9b39 ARM: 8113/1: remove remaining definitions of PLAT_PHYS_OFFSET from <mach/memory.h>
The platforms selecting NEED_MACH_MEMORY_H defined the start address of
their physical memory in the respective <mach/memory.h>. With
ARM_PATCH_PHYS_VIRT=y (which is quite common today) this is useless
though because the definition isn't used but determined dynamically.

So remove the definitions from all <mach/memory.h> and provide the
Kconfig symbol PHYS_OFFSET with the respective defaults in case
ARM_PATCH_PHYS_VIRT isn't enabled.

This allows to drop the dependency of PHYS_OFFSET on !NEED_MACH_MEMORY_H
which prevents compiling an integrator nommu-kernel.
(CONFIG_PAGE_OFFSET which has "default PHYS_OFFSET if !MMU" expanded to
"0x" because CONFIG_PHYS_OFFSET doesn't exist as INTEGRATOR selects
NEED_MACH_MEMORY_H.)

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-07-29 23:08:52 +01:00
Nicholas Krause e6f990a883 omap16xx: Removes fixme no longer needed in ocpi_enable()
This removes the FIXME message above ocpi_enable being declared
for proper locking in this function. As of the current kernel
verisons there is no need for locking as only one driver uses
this function currently and therefore there is no need for real
locking requirements.

Signed-off-by: Nicholas Krause <xerofoify@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-07-08 01:15:36 -07:00
Paul Bolle 77c2f02edb ARM: OMAP: replace checks for CONFIG_USB_GADGET_OMAP
Commit 193ab2a607 ("usb: gadget: allow multiple gadgets to be built")
apparently required that checks for CONFIG_USB_GADGET_OMAP would be
replaced with checks for CONFIG_USB_OMAP. Do so now for the remaining
checks for CONFIG_USB_GADGET_OMAP, even though these checks have
basically been broken since v3.1.

And, since we're touching this code, use the IS_ENABLED() macro, so
things will now (hopefully) also work if USB_OMAP is modular.

Fixes: 193ab2a607 ("usb: gadget: allow multiple gadgets to be built")
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-05-16 14:14:25 -07:00
Paul Bolle 4906cc73c2 ARM: OMAP: SX1: remove check for CONFIG_SX1_OLD_FLASH
A check for CONFIG_SX1_OLD_FLASH was added in v2.6.24. But the related
Kconfig symbol was never part of the tree. So we can remove some dead
code.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-05-16 14:12:05 -07:00
Paul Bolle 7d684ff8a9 ARM: OMAP: remove some dead code
A check for CONFIG_CBUS_TAHVO_USB was added in v2.6.17. The related
Kconfig symbol has never been part of the tree. Remove that check.

Replace the while (...) loop with a simple if (...) statement, while
we're at it.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Acked-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-05-16 14:10:53 -07:00
Linus Torvalds dfc25e4503 ARM: SoC: cleanups for 3.15
These cleanup patches are mainly move stuff around and should all
 be harmless. They are mainly split out so that other branches can
 be based on top to avoid conflicts.
 
 Notable changes are:
 
 * We finally remove all mach/timex.h, after CLOCK_TICK_RATE is no
   longer used. (Uwe Kleine-König)
 * The Qualcomm MSM platform is split out into legacy mach-msm and
   new-style mach-qcom, to allow easier maintainance of the new
   hardware support without regressions. (Kumar Gala)
 * A rework of some of the Kconfig logic to simplify multiplatform
   support (Rob Herring)
 * Samsung Exynos gets closer to supporting multiplatform (Sachin
   Kamat and others)
 * mach-bcm3528 gets merged into mach-bcm (Stephen Warren)
 * at91 gains some common clock framework support (Alexandre Belloni,
   Jean-Jacques Hiblot and other French people).
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIVAwUAUz/yOWCrR//JCVInAQLOPBAAwTMkMrD8S8ggz6vfiQHZNdRPAC7NUJ46
 +eYKmBVi5d6EdnjNuRElWENsh0ZosSAUFHrXsIC2NdH9sAJ9HOqWNNLymuA59Jo9
 HZ/Ze6xQXDPNV7TROPoXuIli/2OCOXyyQHJsfI7h9V3PCx31qo0B5OdCxU0mtXK6
 r1giREhnJFwfQMF/FTdnzhalFJoSjWwv/nkpNmQDJKRLKj9GzwQqItqw68gV6RzU
 Gnt6YK+9xC1B0cfWTFhAm6kbr9i7mvHoMG5tE3no2uuJMn4K7TgeMqOyvPWhmUeB
 EZi656szT1m5VfRWOqG+7coZO2VM4GO4NI0Xfin3GHllugOYls1il/FAfCPMLiwh
 RvuOmQGCkLIpdkuHop5QaI/h1EzlHA59nzTjmGf1+wWPsm0CIg08XOD9izQbRnN9
 EmRqn1/8POIi17xcWyeMp8LB0APsTI+IflZFaYprEY9VlLLA/Pd+7udULhs8Bq8y
 1l6fB6aPZKnDKCBy/PEIR+y+EHFEbwfrx6zm/pxVDX6P5DlQMFWL78pdBoJUa2h8
 3pm/bSzNU5OSz1nJMLJv2jBTtnM5BvFgQBUi2qJ9Lr+nUhJXKCJ80kE/nOlXoCIU
 J952p3OhkYTQQcjuUVQeTXvRUOGB7mKok0pDFZNE6c7faqxTCudMABQq/KbMFstU
 eE3cH5FyYj4=
 =GcBb
 -----END PGP SIGNATURE-----

Merge tag 'cleanup-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC cleanups from Arnd Bergmann:
 "These cleanup patches are mainly move stuff around and should all be
  harmless.  They are mainly split out so that other branches can be
  based on top to avoid conflicts.

  Notable changes are:

   - We finally remove all mach/timex.h, after CLOCK_TICK_RATE is no
     longer used (Uwe Kleine-König)
   - The Qualcomm MSM platform is split out into legacy mach-msm and
     new-style mach-qcom, to allow easier maintainance of the new
     hardware support without regressions (Kumar Gala)
   - A rework of some of the Kconfig logic to simplify multiplatform
     support (Rob Herring)
   - Samsung Exynos gets closer to supporting multiplatform (Sachin
     Kamat and others)
   - mach-bcm3528 gets merged into mach-bcm (Stephen Warren)
   - at91 gains some common clock framework support (Alexandre Belloni,
     Jean-Jacques Hiblot and other French people)"

* tag 'cleanup-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (89 commits)
  ARM: hisi: select HAVE_ARM_SCU only for SMP
  ARM: efm32: allow uncompress debug output
  ARM: prima2: build reset code standalone
  ARM: at91: add PWM clock
  ARM: at91: move sam9261 SoC to common clk
  ARM: at91: prepare common clk transition for sam9261 SoC
  ARM: at91: updated the at91_dt_defconfig with support for the ADS7846
  ARM: at91: dt: sam9261: Device Tree support for the at91sam9261ek
  ARM: at91: dt: defconfig: Added the sam9261 to the list of DT-enabled SOCs
  ARM: at91: dt: Add at91sam9261 dt SoC support
  ARM: at91: switch sam9rl to common clock framework
  ARM: at91/dt: define main clk frequency of at91sam9rlek
  ARM: at91/dt: define at91sam9rl clocks
  ARM: at91: prepare common clk transition for sam9rl SoCs
  ARM: at91: prepare sam9 dt boards transition to common clk
  ARM: at91: dt: sam9rl: Device Tree for the at91sam9rlek
  ARM: at91/defconfig: Add the sam9rl to the list of DT-enabled SOCs
  ARM: at91: Add at91sam9rl DT SoC support
  ARM: at91: prepare at91sam9rl DT transition
  ARM: at91/defconfig: refresh at91sam9260_9g20_defconfig
  ...
2014-04-05 13:51:19 -07:00
Linus Torvalds 9f800363bb ARM: SoC non-critical bug fixes for 3.15
Lots of isolated bug fixes that were not found to be important
 enough to be submitted before the merge window or backported
 into stable kernels.
 The vast majority of these came out of Arnd's randconfig testing
 and just prevents running into build-time bugs in configurations
 that we do not care about in practice.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIVAwUAUz/yEmCrR//JCVInAQIDsBAAu9uUC/uuc77953rsRqXPOCqjG4Q4g7Y+
 HGxuztTGGJN6eglK7+aRKbmSlZck6KQykevm+OYnoINcGyazXmajkUnbaVvgNCU9
 iRyRLkLjilDWBQXY5Ou3wK2WgyI4pMokRYIkp+MpQHQ5IlvJ5707IYj+FswdK5kT
 npbcP+L5oJ13afVnI18uflapr2ecXGdvfuEZw3sWpKcfefutxmEVYzRUBkNgj5Pd
 bva9GcWuA/ymRJR1XQmXh7EE+kqzGX5P0hFfaQsgtUwvY2Bv3fNia+GMLrf6pUGb
 Pl3rxyfo9VKoW0gbeVB7sk1rHTgh6ay2T8PBSz5dpyoR4A1n8BZQXPjUd7fBKv97
 VRWMXRQz5sQ05FnvJFlV5CcYikf8GFOPooUhgY7Fo1sdoDawkAOQ1AJ4yhPsx86u
 V/S3o3pMWqDGnFMFmS95iAWW7Ru66XVYsPJnFktiLXt6SLlSAY52DzV6HlStF4hi
 O9dsIi5TsOxYhSWpMFZCxHK/I805zEjGOAyTYnCQB6Lwadg0mUiwdRJvp0YzcdDM
 X1mCsz8yHM3bbhvkxbqzwnBNgz24TkDPA8IvUGFtyxGF+5m8MgAzIKcGc4PKI6Gg
 I9M0oechC2dusvfflXFinvRhZMHMHi8+t58b/+29KrsacnE5vDmBFzeWGUkCXs5q
 oo4cWe14m6U=
 =KRJL
 -----END PGP SIGNATURE-----

Merge tag 'fixes-non-critical-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC non-critical bug fixes from Arnd Bergmann:
 "Lots of isolated bug fixes that were not found to be important enough
  to be submitted before the merge window or backported into stable
  kernels.

  The vast majority of these came out of Arnd's randconfig testing and
  just prevents running into build-time bugs in configurations that we
  do not care about in practice"

* tag 'fixes-non-critical-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (75 commits)
  ARM: at91: fix a typo
  ARM: moxart: fix CPU selection
  ARM: tegra: fix board DT pinmux setup
  ARM: nspire: Fix compiler warning
  IXP4xx: Fix DMA masks.
  Revert "ARM: ixp4xx: Make dma_set_coherent_mask common, correct implementation"
  IXP4xx: Fix Goramo Multilink GPIO conversion.
  Revert "ARM: ixp4xx: fix gpio rework"
  ARM: tegra: make debug_ll code build for ARMv6
  ARM: sunxi: fix build for THUMB2_KERNEL
  ARM: exynos: add missing include of linux/module.h
  ARM: exynos: fix l2x0 saved regs handling
  ARM: samsung: select CRC32 for SAMSUNG_PM_CHECK
  ARM: samsung: select ATAGS where necessary
  ARM: samsung: fix SAMSUNG_PM_DEBUG Kconfig logic
  ARM: samsung: allow serial driver to be disabled
  ARM: s5pv210: enable IDE support in MACH_TORBRECK
  ARM: s5p64x0: fix building with only one soc type
  ARM: s3c64xx: select power domains only when used
  ARM: s3c64xx: MACH_SMDK6400 needs HSMMC1
  ...
2014-04-05 13:44:27 -07:00
Linus Torvalds 2d1eb87ae1 Merge branch 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm
Pull ARM changes from Russell King:

 - Perf updates from Will Deacon:
   - Support for Qualcomm Krait processors (run perf on your phone!)
   - Support for Cortex-A12 (run perf stat on your FPGA!)
   - Support for perf_sample_event_took, allowing us to automatically decrease
     the sample rate if we can't handle the PMU interrupts quickly enough
     (run perf record on your FPGA!).

 - Basic uprobes support from David Long:
     This patch series adds basic uprobes support to ARM. It is based on
     patches developed earlier by Rabin Vincent. That approach of adding
     hooks into the kprobes instruction parsing code was not well received.
     This approach separates the ARM instruction parsing code in kprobes out
     into a separate set of functions which can be used by both kprobes and
     uprobes. Both kprobes and uprobes then provide their own semantic action
     tables to process the results of the parsing.

 - ARMv7M (microcontroller) updates from Uwe Kleine-König

 - OMAP DMA updates (recently added Vinod's Ack even though they've been
   sitting in linux-next for a few months) to reduce the reliance of
   omap-dma on the code in arch/arm.

 - SA11x0 changes from Dmitry Eremin-Solenikov and Alexander Shiyan

 - Support for Cortex-A12 CPU

 - Align support for ARMv6 with ARMv7 so they can cooperate better in a
   single zImage.

 - Addition of first AT_HWCAP2 feature bits for ARMv8 crypto support.

 - Removal of IRQ_DISABLED from various ARM files

 - Improved efficiency of virt_to_page() for single zImage

 - Patch from Ulf Hansson to permit runtime PM callbacks to be available for
   AMBA devices for suspend/resume as well.

 - Finally kill asm/system.h on ARM.

* 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: (89 commits)
  dmaengine: omap-dma: more consolidation of CCR register setup
  dmaengine: omap-dma: move IRQ handling to omap-dma
  dmaengine: omap-dma: move register read/writes into omap-dma.c
  ARM: omap: dma: get rid of 'p' allocation and clean up
  ARM: omap: move dma channel allocation into plat-omap code
  ARM: omap: dma: get rid of errata global
  ARM: omap: clean up DMA register accesses
  ARM: omap: remove almost-const variables
  ARM: omap: remove references to disable_irq_lch
  dmaengine: omap-dma: cleanup errata 3.3 handling
  dmaengine: omap-dma: provide register read/write functions
  dmaengine: omap-dma: use cached CCR value when enabling DMA
  dmaengine: omap-dma: move barrier to omap_dma_start_desc()
  dmaengine: omap-dma: move clnk_ctrl setting to preparation functions
  dmaengine: omap-dma: improve efficiency loading C.SA/C.EI/C.FI registers
  dmaengine: omap-dma: consolidate clearing channel status register
  dmaengine: omap-dma: move CCR buffering disable errata out of the fast path
  dmaengine: omap-dma: provide register definitions
  dmaengine: omap-dma: consolidate setup of CCR
  dmaengine: omap-dma: consolidate setup of CSDP
  ...
2014-04-05 13:20:43 -07:00
Russell King bce5669be3 Merge branch 'devel-stable' into for-next 2014-04-04 00:33:49 +01:00
Russell King 596c471b69 dmaengine: omap-dma: move register read/writes into omap-dma.c
Export the DMA register information from the SoC specific data, such
that we can access the registers directly in omap-dma.c, mapping the
register region ourselves as well.

Rather than calculating the DMA channel register in its entirety for
each access, we pre-calculate an offset base address for the allocated
DMA channel and then just use the appropriate register offset.

Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-04-04 00:31:49 +01:00
Russell King 34a378fcb9 ARM: omap: dma: get rid of 'p' allocation and clean up
The omap_system_dma_plat_info structure is only seven words, it's not
worth the expense of kmalloc()'ing backing store for this only to
release it later.  Note that platform_device_add_data() copies the
data anyway.  Clean up the initialisation of this structure - we don't
even need code to initialise most of this structure.

Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-04-04 00:31:47 +01:00
Russell King 9834f81314 ARM: omap: move dma channel allocation into plat-omap code
This really needs to be there, because otherwise the plat-omap code can
kfree() this data structure, and then re-use the pointer later.

Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-04-04 00:31:46 +01:00
Russell King 0ef64986d6 ARM: omap: dma: get rid of errata global
There's no need for this to be a global variable; move it into the
errata configuration function instead.

Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-04-04 00:31:45 +01:00
Russell King 64a2dc3d3d ARM: omap: clean up DMA register accesses
We can do much better with this by using a structure to describe each
register, rather than code.

Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-04-04 00:31:44 +01:00
Russell King ad0c381a8b ARM: omap: remove almost-const variables
dma_stride and dma_common_ch_start are only ever initialised to one
known value at initialisation, and are private to each of these files.
There's no point these being variables at all.

Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-04-04 00:31:43 +01:00
Russell King e38b1485fd ARM: omap: remove references to disable_irq_lch
The disable_irq_lch method is never actually used, so there's not much
point it existing; remove it.

Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-04-04 00:31:41 +01:00
Arnd Bergmann 600a1dfae2 Merge branch 'randconfig-fixes' into next/fixes-non-critical
This is the first batch of a much longer series of bug fixes
found during randconfig testing. This part are all the simple
patches that are applicable for the arm-soc tree, while most
other fixes will likely go through other maintainers.

* randconfig-fixes: (50 commits)
  ARM: tegra: make debug_ll code build for ARMv6
  ARM: sunxi: fix build for THUMB2_KERNEL
  ARM: exynos: add missing include of linux/module.h
  ARM: exynos: fix l2x0 saved regs handling
  ARM: samsung: select CRC32 for SAMSUNG_PM_CHECK
  ARM: samsung: select ATAGS where necessary
  ARM: samsung: fix SAMSUNG_PM_DEBUG Kconfig logic
  ARM: samsung: allow serial driver to be disabled
  ARM: s5pv210: enable IDE support in MACH_TORBRECK
  ARM: s5p64x0: fix building with only one soc type
  ARM: s3c64xx: select power domains only when used
  ARM: s3c64xx: MACH_SMDK6400 needs HSMMC1
  ARM: s3c24xx: osiris dvs needs tps65010
  ARM: s3c24xx: fix gta02 build error
  ARM: s3c24xx: MINI2440 needs I2C for EEPROM_AT24
  ARM: integrator: only select pl01x if TTY is enabled
  ARM: realview: fix sparsemem build
  ARM: footbridge: make screen_info setup conditional
  ARM: footbridge: fix build with PCI disabled
  ARM: footbridge: don't build floppy code for addin mode
  ...

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-03-22 01:10:19 +01:00
Arnd Bergmann 0b31c53b13 ARM: omap1: don't rely on tps65010
The code for h2 and osk implicitly assumes that the tps65010
driver is built-in, in order to perform the initial regulator
setup.

This is fine for most real uses, but it does get into the way
of build testing with 'make randconfig', since we don't want
platforms to implicitly select device drivers and subsystems
such as I2C.

This patch by contrast changes the board files to not call
into the tps65010 driver when that is not built-in, allowing
us to build all configurations including some that will not
work properly on this hardware.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Tony Lindgren <tony@atomide.com>
2014-03-21 18:23:34 +01:00
Felipe Balbi 84bef11710 ARM: omap1: fix build when !CONFIG_OMAP_32K_TIMER
If CONFIG_OMAP_32K_TIMER isn't enabled, we will
try to use enable_dyn_sleep which wasn't defined
anywhere.

In order to fix the problem, we always define
enable_dyn_sleep as 0 when !CONFIG_OMAP_32K_TIMER.

Signed-off-by: Felipe Balbi <balbi@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-03-21 18:23:33 +01:00
Thomas Gleixner b524ca742e arm: omap: Fix typo in ams-delta-fiq.c
8435cf757 (arm: Replace various irq_desc accesses) typoed
irq_get_irq_chip() instead of irq_get_chip().

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-03-20 12:44:02 +01:00
Thomas Gleixner ffb12cf002 Merge branch 'irq/for-gpio' into irq/core
Merge the request/release callbacks which are in a separate branch for
consumption by the gpio folks.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-03-12 16:01:07 +01:00
Thomas Gleixner 8435cf7576 arm: Replace various irq_desc accesses
Use the proper functions. There is no need to fiddle with irq_desc.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>C
Acked-by: Tony Lindgren <tony@atomide.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: arm <linux-arm-kernel@lists.infradead.org>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Link: http://lkml.kernel.org/r/20140223212737.099151500@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-03-04 17:37:52 +01:00
Olof Johansson 11d73c56b9 This cleanup series gets rid of <mach/timex.h> for platforms not using
ARCH_MULTIPLATFORM. (For multi-platform code it's already unused since
 387798b (ARM: initial multiplatform support).)
 
 To make this work some code out of arch/arm needed to be adapted. The
 respective changes got acks by their maintainers to be taken via armsoc
 (with Andrew Morton substituting for Alessandro Zummo as rtc maintainer).
 
 Compared to the previous pull request there was another patch added that
 fixes a (non-critical) regression on ixp4xx. Olof Johansson asked to not
 squash this fix into the original commit to save him from the need to
 reverify the series.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABCAAGBQJTA8PeAAoJEOLc3ZEyZpvW5GEP/iz+HIx8Rkf3exUOorZB0Kef
 dPC1Bmc4SThffhgmmXTjSapTzjfnuC8xq8dni008L7QR0LFJsC/rw8bR9GqYhTDs
 EP7Sk0vDJcTUw9dvlIG0jpBioxdsPY7isU8K85tr2a+dzi4JA2h8iv6gE7bsOf1c
 b18hIWp2ZZdeYQX3OcuzPeVfvXuMaayBJChq0akoW7zqxG2nHG9j1vCSOhBtrgpc
 xCTuEqPoaDOdXjdhyda//3SKkIYh1eMf+RWMgW38vz2uHEI3AsMn/EWe6pNRKzRt
 JdVC6LWFl5tl1Dz73NoGFQO+ztTBb2pTrmqggc+Hi4iTekJSmJSFU51D/E0hdJFj
 KmWDWPLiUdAItjPuRz/HyeZxoIZQjg9PJ8MkjwVNAz4f4Vmw2xNnAV1Eur3k9JyV
 fo55eaBvy2KIGzBB+/ksMUvs4HzMJ7Z/dVPzZYRF8VxlYFJXExT0O42oeJ8KsfH7
 dJ1bjk+3VIWPLH3DHyyiIfBL1oxe4MemqrAREFnN2QxYHyCipXLwH35uNZXAqvcU
 jverroWnCdrpOn9KI+vpnp/kuE7Qc1IH/AwAZngPj2xhaFapiH6h1JK/xWcWjijR
 AKv1DhFJMqSp9fvclr/ZAb7o35V/LG0rpCs+oZumCCARwpxkbo8xXgG0CfPsYFrG
 KwLWPz5zwySGwvDZ2wub
 =g6PN
 -----END PGP SIGNATURE-----

Merge tag 'dropmachtimexh-v2' of git://git.pengutronix.de/git/ukl/linux into next/cleanup

This cleanup series gets rid of <mach/timex.h> for platforms not using
ARCH_MULTIPLATFORM. (For multi-platform code it's already unused since
387798b (ARM: initial multiplatform support).)

To make this work some code out of arch/arm needed to be adapted. The
respective changes got acks by their maintainers to be taken via armsoc
(with Andrew Morton substituting for Alessandro Zummo as rtc maintainer).

Compared to the previous pull request there was another patch added that
fixes a (non-critical) regression on ixp4xx. Olof Johansson asked to not
squash this fix into the original commit to save him from the need to
reverify the series.

* tag 'dropmachtimexh-v2' of git://git.pengutronix.de/git/ukl/linux:
  ARM: ixp4xx: fix timer latch calculation
  ARM: drop <mach/timex.h> for !ARCH_MULTIPLATFORM, too
  ARM: rpc: stop using <mach/timex.h>
  ARM: ixp4xx: stop using <mach/timex.h>
  input: ixp4xx-beeper: don't use symbols from <mach/timex.h>
  ARM: at91: don't use <mach/timex.h>
  ARM: ep93xx: stop using mach/timex.h
  ARM: mmp: stop using mach/timex.h
  ARM: netx: stop using mach/timex.h
  ARM: sa1100: stop using mach/timex.h
  clocksource: sirf/marco+prima2: drop usage of CLOCK_TICK_RATE
  rtc: pxa: drop unused #define TIMER_FREQ
  rtc: at91sam9: include <mach/hardware.h> explicitly
  ARM/serial: at91: switch atmel serial to use gpiolib

Signed-off-by: Olof Johansson <olof@lixom.net>
2014-02-18 22:19:33 -08:00
Aaro Koskinen 8c5cb1a8f8 ARM: OMAP1: nokia770: enable tahvo-usb
Add platform data for tahvo-usb. This is the last missing piece to get
Tahvo USB working with 3.14.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-02-13 15:20:14 -08:00
Linus Torvalds dfd10e7ae6 ARM: SoC platform changes for 3.14
New core SoC-specific changes.
 
 New platforms:
 * Introduction of a vendor, Hisilicon, and one of their SoCs with some
   random numerical product name.
 * Introduction of EFM32, embedded platform from Silicon Labs (ARMv7m, i.e. !MMU).
 * Marvell Berlin series of SoCs, which include the one in Chromecast.
 * MOXA platform support, ARM9-based platform used mostly in industrial products
 * Support for Freescale's i.MX50 SoC.
 
 Other work:
 * Renesas work for new platforms and drivers, and conversion over to
   more multiplatform-friendly device registration schemes.
 * SMP support for Allwinner sunxi platforms.
 * ... plus a bunch of other stuff across various platforms.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJS4VggAAoJEIwa5zzehBx3YkEP/j/Vp83zPcPijb8CNLUGJ9rK
 RTOW9hlLbwCGAcIi/32XVjup1ylTzQuwKpH2R6Sf2GRcmXI1HbCCyDSGKWq+eK9C
 vDRoWiU9DVRmXuaC7R1dscLS1qSobVoI80bOstblZW65799z48IllD7rJA1BzDIg
 vUy4knY9hO39DK7sJymXTBJepWxXJHMaYmr15xuxbaR3Qsp8zisqyzMwLqVfBwFB
 FyPr2PfxU8HJOoWhIsVo+679pmb9tHD6our0HG/lHSuPcRO/3UwN+VD87SwfpjNx
 P7qiRFkIoMooiTRmjwPPNbMZBJHl6vBR1RWHmws5s9aay1DDhdvQURxKx4bNaN/A
 UzwiestopISLChd9jqjxTbngl1mvLaL9JwBjRVAkXG4vJJFrhwqvmcMrlszA3ueR
 2Th/NBk0b2s8ncAuT7bFe4i/H7es8aI/D2weF3FxRGgpan/B0T0UDAKO+rrMYZ0q
 1ZoqlgMQZ0o1l7B5v90h0QQo/GMmin1xzyAChmsl8xbOHh5YfWVFGwLzVbYeZ/YJ
 yf3CcgQjAA8UV3f1J3nZeqM84o8qqtKUmUjsqWIgT2DnxOoM3pGckrmQ4OvhLccd
 etROW2nr8EqmoL7shheeHPANoDsTT1XSs0xbWo4ZBpGW5rTIFVoLEGyqa48tw5qA
 pkH1KwpwEXTrw6MXP5L1
 =pgLW
 -----END PGP SIGNATURE-----

Merge tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC platform changes from Olof Johansson:
 "New core SoC-specific changes.

  New platforms:
   * Introduction of a vendor, Hisilicon, and one of their SoCs with
     some random numerical product name.
   * Introduction of EFM32, embedded platform from Silicon Labs (ARMv7m,
     i.e. !MMU).
   * Marvell Berlin series of SoCs, which include the one in Chromecast.
   * MOXA platform support, ARM9-based platform used mostly in
     industrial products
   * Support for Freescale's i.MX50 SoC.

  Other work:
   * Renesas work for new platforms and drivers, and conversion over to
     more multiplatform-friendly device registration schemes.
   * SMP support for Allwinner sunxi platforms.
   * ... plus a bunch of other stuff across various platforms"

* tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (201 commits)
  ARM: tegra: fix tegra_powergate_sequence_power_up() inline
  ARM: msm_defconfig: Update for multi-platform
  ARM: msm: Move MSM's DT based hardware to multi-platform support
  ARM: msm: Only build timer.c if required
  ARM: msm: Only build clock.c on proc_comm based platforms
  ARM: ux500: Enable system suspend with WFI support
  ARM: ux500: turn on PRINTK_TIME in u8500_defconfig
  ARM: shmobile: r8a7790: Fix I2C controller names
  ARM: msm: Simplify ARCH_MSM_DT config
  ARM: msm: Add support for MSM8974 SoC
  ARM: sunxi: select ARM_PSCI
  MAINTAINERS: Update Allwinner sunXi maintainer files
  ARM: sunxi: Select RESET_CONTROLLER
  ARM: imx: improve the comment of CCM lpm SW workaround
  ARM: imx: improve status check of clock gate
  ARM: imx: add necessary interface for pfd
  ARM: imx_v6_v7_defconfig: Select CONFIG_REGULATOR_PFUZE100
  ARM: imx_v6_v7_defconfig: Select MX35 and MX50 device tree support
  ARM: imx: Add cpu frequency scaling support
  ARM i.MX35: Add devicetree support.
  ...
2014-01-23 18:40:49 -08:00
Uwe Kleine-König 79f08d9ed2 ARM: drop <mach/timex.h> for !ARCH_MULTIPLATFORM, too
While <mach/timex.h> isn't used for multi-platform builds since long it
still is for "normal" builds. As the previous patches fix all sites to
not make use of this per-platform file, it can go now for good also for
platforms that are not (yet) converted to multi-platform.

While at it there are no users of CLOCK_TICK_RATE any more, so also drop
the dummy #define.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2013-12-20 17:17:16 +01:00
Aaro Koskinen 317a3fa6b0 ARM: OMAP1: USB: move omap_usb_config to platform data
Move omap_usb_config to platform data, so that OTG driver can include it.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-12-06 14:36:31 -06:00
Kevin Hilman b8969ef5cf Merge branch 'soc/sched_clock' into next/soc
From Stephen Boyd:
* soc/sched_clock:
  ARM: versatile: Switch to sched_clock_register()
  ARM: orion: Switch to sched_clock_register()
  ARM: OMAP: Switch to sched_clock_register()
  ARM: iop: Switch to sched_clock_register()
  ARM: u300: Switch to sched_clock_register()
  ARM: sa1100: Switch to sched_clock_register()
  ARM: pxa: Switch to sched_clock_register()
  ARM: OMAP2+: Switch to sched_clock_register()
  ARM: OMAP1: Switch to sched_clock_register()
  ARM: msm: Switch to sched_clock_register()
  ARM: mmp: Switch to sched_clock_register()
  ARM: IXP4xx: Switch to sched_clock_register()
  ARM: integrator: Switch to sched_clock_register()
  ARM: imx: Switch to sched_clock_register()
  ARM: davinci: Switch to sched_clock_register()
  ARM: clps711x: Switch to sched_clock_register()
  ARM: timer-sp: Switch to sched_clock_register()

Signed-off-by: Kevin Hilman <khilman@linaro.org>
2013-12-06 08:05:55 -08:00
Stephen Boyd 50f6dca69f ARM: OMAP1: Switch to sched_clock_register()
The 32 bit sched_clock interface now supports 64 bits. Upgrade to
the 64 bit function to allow us to remove the 32 bit registration
interface.

Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Kevin Hilman <khilman@linaro.org>
2013-11-21 15:41:00 -08:00
Linus Torvalds 13509c3a9d Merge branch 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c changes from Wolfram Sang:
 - new drivers for exynos5, bcm kona, and st micro
 - bigger overhauls for drivers mxs and rcar
 - typical driver bugfixes, cleanups, improvements
 - got rid of the superfluous 'driver' member in i2c_client struct This
   touches a few drivers in other subsystems.  All acked.

* 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (38 commits)
  i2c: bcm-kona: fix error return code in bcm_kona_i2c_probe()
  i2c: i2c-eg20t: do not print error message in syslog if no ACK received
  i2c: bcm-kona: Introduce Broadcom I2C Driver
  i2c: cbus-gpio: Fix device tree binding
  i2c: wmt: add missing clk_disable_unprepare() on error
  i2c: designware: add new ACPI IDs
  i2c: i801: Add Device IDs for Intel Wildcat Point-LP PCH
  i2c: exynos5: Remove incorrect clk_disable_unprepare
  i2c: i2c-st: Add ST I2C controller
  i2c: exynos5: add High Speed I2C controller driver
  i2c: rcar: fixup rcar type naming
  i2c: scmi: remove some bogus NULL checks
  i2c: sh_mobile & rcar: Enable the driver on all ARM platforms
  i2c: sh_mobile: Convert to clk_prepare/unprepare
  i2c: mux: gpio: use reg value for i2c_add_mux_adapter
  i2c: mux: gpio: use gpio_set_value_cansleep()
  i2c: Include linux/of.h header
  i2c: mxs: Fix PIO mode on i.MX23
  i2c: mxs: Rework the PIO mode operation
  i2c: mxs: distinguish i.MX23 and i.MX28 based I2C controller
  ...
2013-11-18 15:50:07 -08:00
Tony Lindgren ffd076eea3 ARM: OMAP1: Fix a bunch of GPIO related section warnings after initdata got corrected
Commit f8e7ba66 (ARM: OMAP1: fix incorrect placement of
__initdata tag) fixed things but we started seeing section
warnings. Looks like I missed those in my automatic
build scripts:

Section mismatch in reference from the variable omap7xx_gpio6 to the (unknown reference) .init.data:(unknown)
Section mismatch in reference from the variable omap7xx_gpio6 to the (unknown reference) .init.data:(unknown)
Section mismatch in reference from the variable omap7xx_gpio5 to the (unknown reference) .init.data:(unknown)
...

Fix the issue by removing __initdata for the resources.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Kevin Hilman <khilman@linaro.org>
2013-10-18 10:50:51 -07:00
Majunath Goudar 8ff875e7f9 ARM: mach-omap1: Fix omap1510_fpga_init_irq() implicit declarations.
This patch adds a omap1510_fpga_init_irq() inline dummy implementations
in arch/arm/mach-omap1/common.h. Without this patch,build system can
lead to issues. This was discovered during randconfig testing,in which
other than CONFIG_ARCH_OMAP15XX was enabled the leading to the following
error:

CC      arch/arm/mach-omap1/board-innovator.o
arch/arm/mach-omap1/board-innovator.c: In function ‘innovator_init’:
arch/arm/mach-omap1/board-innovator.c:377:3: error: implicit declaration of
function ‘omap1510_fpga_init_irq’ [-Werror=implicit-function-declaration]
cc1: some warnings being treated as errors
make[1]: *** [arch/arm/mach-omap1/board-innovator.o] Error 1
make: *** [arch/arm/mach-omap1] Error 2

Signed-off-by: Manjunath Goudar <csmanjuvijay@gmail.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-omap@vger.kernel.org
Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-08 11:04:22 -07:00
Bartlomiej Zolnierkiewicz f8e7ba662c ARM: OMAP1: fix incorrect placement of __initdata tag
__initdata tag should be placed between the variable name and equal
sign for the variable to be placed in the intended .init.data section.

Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-03 13:24:36 -07:00
Michael Opdenacker fe806d04d0 ARM: OMAP: remove deprecated IRQF_DISABLED
This patch proposes to remove the IRQF_DISABLED flag from OMAP code
It's a NOOP since 2.6.35, and will be removed one day.

Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-03 13:24:36 -07:00
Vivien Didelot 25f73ed5c6 misc: (at24) move header to linux/platform_data/
This patch moves the at24.h header from include/linux/i2c to
include/linux/platform_data and updates existing support accordingly.

It also fixes the following checkpatch warning:

    WARNING: please, no space before tabs
    #436: FILE: include/linux/platform_data/at24.h:31:
    + * ^Iu8 *mac_addr = ethernet_pdata->mac_addr;$

Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2013-09-30 06:02:34 +02:00
R Sricharan 6852215a32 ARM: DRA7: id: Add cpu detection support for DRA7xx based SoCs'
The DRA7xx is a high-performance, infotainment application device,
based on enhanced OMAP architecture integrated on a 28-nm technology.

Since DRA7 is a platform supported only using DT, the cpu detection
is based on the compatibles passed from DT blobs as suggested here
http://lists.infradead.org/pipermail/linux-arm-kernel/2013-July/187712.html

Suggested-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: R Sricharan <r.sricharan@ti.com>
Signed-off-by: Rajendra Nayak <rnayak@ti.com>
2013-08-13 16:58:08 +05:30
Robin Holt 7b6d864b48 reboot: arm: change reboot_mode to use enum reboot_mode
Preparing to move the parsing of reboot= to generic kernel code forces
the change in reboot_mode handling to use the enum.

[akpm@linux-foundation.org: fix arch/arm/mach-socfpga/socfpga.c]
Signed-off-by: Robin Holt <holt@sgi.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Russ Anderson <rja@sgi.com>
Cc: Robin Holt <holt@sgi.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-09 10:33:29 -07:00
Linus Torvalds 21884a83b2 Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer core updates from Thomas Gleixner:
 "The timer changes contain:

   - posix timer code consolidation and fixes for odd corner cases

   - sched_clock implementation moved from ARM to core code to avoid
     duplication by other architectures

   - alarm timer updates

   - clocksource and clockevents unregistration facilities

   - clocksource/events support for new hardware

   - precise nanoseconds RTC readout (Xen feature)

   - generic support for Xen suspend/resume oddities

   - the usual lot of fixes and cleanups all over the place

  The parts which touch other areas (ARM/XEN) have been coordinated with
  the relevant maintainers.  Though this results in an handful of
  trivial to solve merge conflicts, which we preferred over nasty cross
  tree merge dependencies.

  The patches which have been committed in the last few days are bug
  fixes plus the posix timer lot.  The latter was in akpms queue and
  next for quite some time; they just got forgotten and Frederic
  collected them last minute."

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (59 commits)
  hrtimer: Remove unused variable
  hrtimers: Move SMP function call to thread context
  clocksource: Reselect clocksource when watchdog validated high-res capability
  posix-cpu-timers: don't account cpu timer after stopped thread runtime accounting
  posix_timers: fix racy timer delta caching on task exit
  posix-timers: correctly get dying task time sample in posix_cpu_timer_schedule()
  selftests: add basic posix timers selftests
  posix_cpu_timers: consolidate expired timers check
  posix_cpu_timers: consolidate timer list cleanups
  posix_cpu_timer: consolidate expiry time type
  tick: Sanitize broadcast control logic
  tick: Prevent uncontrolled switch to oneshot mode
  tick: Make oneshot broadcast robust vs. CPU offlining
  x86: xen: Sync the CMOS RTC as well as the Xen wallclock
  x86: xen: Sync the wallclock when the system time is set
  timekeeping: Indicate that clock was set in the pvclock gtod notifier
  timekeeping: Pass flags instead of multiple bools to timekeeping_update()
  xen: Remove clock_was_set() call in the resume path
  hrtimers: Support resuming with two or more CPUs online (but stopped)
  timer: Fix jiffies wrap behavior of round_jiffies_common()
  ...
2013-07-06 14:09:38 -07:00
Thomas Gleixner 2b0f89317e Merge branch 'timers/posix-cpu-timers-for-tglx' of
git://git.kernel.org/pub/scm/linux/kernel/git/frederic/linux-dynticks into timers/core

Frederic sayed: "Most of these patches have been hanging around for
several month now, in -mmotm for a significant chunk. They already
missed a few releases."

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-07-04 23:11:22 +02:00
Linus Torvalds 0bf6a210a4 ARM SoC driver specific changes
These changes are all driver specific and cross over between arm-soc
 contents and some other subsystem, in these cases cpufreq, crypto,
 dma, pinctrl, mailbox and usb, and the subsystem owners agreed to
 have these changes merged through arm-soc. As we proceed to untangle
 the dependencies between platform code and driver code, the amount of
 changes in this category is fortunately shrinking, for 3.11 we have
 16 branches here and 101 non-merge changesets, the majority of which
 are for the stedma40 dma engine driver used in the ux500 platform.
 Cleaning up that code touches multiple subsystems, but gets rid
 of the dependency in the end.
 
 The mailbox code moved out from mach-omap2 to drivers/mailbox
 is an intermediate step and is still omap specific at the moment.
 Patches exist to generalize the subsystem and add other drivers
 with the same API, but those did not make it for 3.11.
 
 Conflicts:
 * In cpu-db8500.c results from the removal of the u8500_of_init_devices
   function in combination with the split of u8500_auxdata_lookup.
 
 * In arch/arm/mach-omap2/devices.c, the includes got reshuffled.
   we need to keep linux/wl12xx.h and linux/platform_data/mailbox-omap.h.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIVAwUAUdLnomCrR//JCVInAQJI/A/9FydsQa9sdnzLFgcdX5BeRRwkXLfDifCM
 zDTfUBo+LriKOs7QHblmDg1MnY1UMB2IfrdHD0FsjK7WbZ/91EMAGDPYcI7Fu4+u
 pGStxwWi2v+oCT1jjeOkCPT7hdCqogsSpybYq8itSb+zdvdOi6U35dWEKz8xGqz4
 vTL9gTZbJP0kowkjIcaryk7FIj7BTIvMCW8n55JZEkDe0BuSJGYn5c3Mntut12ZK
 5xM2PeNe2sd3dIdA6XbM2ye/XmYa8xY8Qu4/ijxfH1gnJLvz9Unp96nRXpEbIeMb
 BH2Sro8dxsMCaweIQhSRKGnUWMYO/Rh7/+5EqzJ163Ezthx9nvHXJY2ndWuD7uM1
 IcGrMxLtqP22TEMtZAVEATDp/5ymxEo5GM+eayUojQDn213wOJjRs5xz5IBsH4KM
 8CM/gpadWmLjWku72yEV4lryLcdS0NVQzpTnEbILEGOU4u7qJtxRAp7x7tWBtFg8
 4m/eWcSVk/U2SYbXmQHsfukuWgKY0cnZbctPcdnaqXwTP7toJEAK3gxoMtWh49Jq
 2M2PVFyFejaaq5b/71wAJ7ePYw56H0N/F3RsGpPE55AY15++gSoQ+3t2Si68hDw8
 NtyJMkQYpTvtqJbHXWpQQ3Zfs7pDBe01WDV7i+m4JTNggxUDaO/t1Fqp+fEksm4J
 r+luEf5Gcgk=
 =mJsI
 -----END PGP SIGNATURE-----

Merge tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver specific changes from Arnd Bergmann:
 "These changes are all driver specific and cross over between arm-soc
  contents and some other subsystem, in these cases cpufreq, crypto,
  dma, pinctrl, mailbox and usb, and the subsystem owners agreed to have
  these changes merged through arm-soc.

  As we proceed to untangle the dependencies between platform code and
  driver code, the amount of changes in this category is fortunately
  shrinking, for 3.11 we have 16 branches here and 101 non-merge
  changesets, the majority of which are for the stedma40 dma engine
  driver used in the ux500 platform.  Cleaning up that code touches
  multiple subsystems, but gets rid of the dependency in the end.

  The mailbox code moved out from mach-omap2 to drivers/mailbox is an
  intermediate step and is still omap specific at the moment.  Patches
  exist to generalize the subsystem and add other drivers with the same
  API, but those did not make it for 3.11."

* tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (101 commits)
  crypto: ux500: use dmaengine_submit API
  crypto: ux500: use dmaengine_prep_slave_sg API
  crypto: ux500: use dmaengine_device_control API
  crypto: ux500/crypt: add missing __iomem qualifiers
  crypto: ux500/hash: add missing static qualifiers
  crypto: ux500/hash: use readl on iomem addresses
  dmaengine: ste_dma40: Declare memcpy config as static
  ARM: ux500: Remove mop500_snowball_ethernet_clock_enable()
  ARM: ux500: Correct the EN_3v3 regulator's on/off GPIO
  ARM: ux500: Provide a AB8500 GPIO Device Tree node
  gpio: rcar: fix gpio_rcar_of_table
  gpio-rcar: Remove #ifdef CONFIG_OF around OF-specific sections
  gpio-rcar: Reference core gpio documentation in the DT bindings
  clk: exynos5250: Add enum entries for divider clock of i2s1 and i2s2
  ARM: dts: Update Samsung I2S documentation
  ARM: dts: add clock provider information for i2s controllers in Exynos5250
  ARM: dts: add Exynos audio subsystem clock controller node
  clk: samsung: register audio subsystem clocks using common clock framework
  ARM: dts: use #include for all device trees for Samsung
  pinctrl: s3c24xx: use correct header for chained_irq functions
  ...
2013-07-02 14:33:21 -07:00
Linus Torvalds 40e71e7015 ARM SoC board specific changes
These are 18 branches on 9 platforms with board specific changes, mostly
 for defconfig files, but nothing really exciting in here.
 
 Since the shmobile platform still uses board files for some of the newer
 machines, we get a few changes there as the result of drivers getting
 enabled for those boards. This causes some conflicts with contents getting
 added from multiple branches in sh-mobile specific files. Renesas is
 putting a lot of work into migrating to device-tree based setup, which
 will make all those files obsolete in the future and avoid both the
 conflicts and the need to have these files in the first place.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIVAwUAUdLnmmCrR//JCVInAQKNuxAAxXpBslUGRpI8O28KHA3EeL+9HR5wBoKo
 K6q6fQlAv9dcGJOx7fkyHU4UfE1kV+M6l4R9BM8VcjflQjCnG4GrQo8qgJNY14nf
 OpQKSIHEtdBHzFpHEIxogByR1i05hL8nrm21TElgi/aYlDwKbXnApY23ubApPif4
 oXmES9ppXvnz1D7bCE7PaZf+TIgufpPFkioQYcV93nD0x5tYu1mZn2xSfYDekAyU
 mUe1p2oX+77U0lohVQCo1H/ZOJBdoAN1U//2QCiL8YKJitQf/vOVs3QtHEUywIiU
 CyUaDhfM7sX4QKBWzwjxoVOcT6QC/qhaaqaases0gjgjepKaSqUTZMBdLI7oyF3o
 2ExYv8BMGilbIyNUYoxeoqz9zA3IQ7wDxaBh3G1JY9k0/BhKmsEwtGYkSJPdOgpt
 XyX7N/xKzy0lTWf1N4eSWUiccfXdVjLFf3Jp2xA7e/KJfzFAF/RJXdGiV2Kzdr7m
 mZ7ESYRk+S3ENgpI/QI4C6kQ7EBynQjhn5t2+iK9k4gKNspNZ3TjLCQif0v0xE3H
 IIsaSqLBuj9IZ1r13fpQJZIyTr+dHsx2s6QQBFXYzeQ/cjfSRGZP4FmYyweGctfR
 Hh1AAshrOAwNl4ZdXgIT08JKtBocaGFUtt4syvPfAFYoojMN58xg5EG4FYtKpKHp
 xU6w43o6KnQ=
 =7bgc
 -----END PGP SIGNATURE-----

Merge tag 'boards-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC board specific changes from Arnd Bergmann:
 "These are 18 branches on 9 platforms with board specific changes,
  mostly for defconfig files, but nothing really exciting in here.

  Since the shmobile platform still uses board files for some of the
  newer machines, we get a few changes there as the result of drivers
  getting enabled for those boards.  This causes some conflicts with
  contents getting added from multiple branches in sh-mobile specific
  files.  Renesas is putting a lot of work into migrating to device-tree
  based setup, which will make all those files obsolete in the future
  and avoid both the conflicts and the need to have these files in the
  first place."

* tag 'boards-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (49 commits)
  arm: multi_v7_defconfig: Enable initrd/initramfs support
  arm: multi_v7_defconfig: Enable Zynq UART driver
  ARM: omap2plus_defconfig: enable USB_PHY and NOP_USB_XCEIV
  ARM: OMAP1: nokia770: enable Tahvo
  ARM: OMAP3EVM: Marking omap3_evm_display_init() with CONFIG_BROKEN
  arm: omap: board-overo: reset GPIO for SMSC911x
  ARM: shmobile: BOCK-W: change Ether device name
  ARM: ux500: board-mop500: remove unused pin modes
  ARM: shmobile: bockw: add MMCIF support
  ARM: shmobile: bockw: add SPI FLASH support
  ARM: shmobile: bockw: add I2C device support
  ARM: shmobile: BOCK-W: add Ether support
  ARM: tegra: defconfig updates
  ARM: shmobile: bockw defconfig: add MMCIF support
  ARM: shmobile: bockw defconfig: add M25P80 support
  ARM: shmobile: bockw defconfig: add RTC RX8581 support
  ARM: shmobile: marzen: keep local function as static
  ARM: shmobile: bockw: add SDHI0 support
  ARM: shmobile: marzen: Use INTC External IRQ pin driver for SMSC
  ARM: shmobile: lager: support GPIO switches
  ...
2013-07-02 14:10:26 -07:00
Aaro Koskinen a4b13a3b26 ARM: OMAP1: nokia770: enable Tahvo
Add platform data for Tahvo.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
[tony@atomide.com: left out extcon to remove dependency to USB patches]
Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-06-18 03:12:13 -07:00
Jarkko Nikula e2081f96ba ARM: OMAP1: Remove dma.h
Add definitions in arch/arm/mach-omap1/dma.h are now removed so remove
the file and include statements from dma.c and lcd_dma.c.

Signed-off-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-06-18 00:12:34 -07:00
Jarkko Nikula b6a85477d7 ARM: OMAP1: Remove legacy irda.h and irda setup from board files
omap-ir.c driver has never been upstream and was also removed from
linux-omap.git four years ago (See linux-omap.git commit efd1e3f
("REMOVE OMAP LEGACY CODE: Reset drivers/net/irda to mainline")).

Therefore remove needless device registration from a few board files
and delete thus to be unused arch/arm/mach-omap1/include/mach/irda.h
and unused OMAP_DMA_UART3_* definitions from dma.h.

Signed-off-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-06-18 00:12:34 -07:00
Jarkko Nikula bf2920aa57 ARM: OMAP1: Remove duplicated DMA channel definitions
Similarly than with OMAP2 there are many DMA channel definitions that have
been moved or redefined in drivers using them and we can remove them from
dma.h.

There is exception with MMC that arch/arm/mach-omap1/devices.c is using
MMC DMA channel definitions for setting platform data but those can be well
replaced with numeric values.

Remove dma.h include from arch/arm/mach-omap1/devices.c and use a script
below for dropping duplicated definitions and for replacing definitions
with DMA channel numbers.

grep '#define OMAP_DMA' arch/arm/mach-omap1/dma.h | while read -r i; do \
		DDEF=`echo $i |cut -d ' ' -f 1-2`; \
		DEF=`echo $DDEF |cut -d ' ' -f 2`; \
		CH=`echo $i |cut -d ' ' -f 3`; \
		if [ `git grep -c "$DDEF" |wc -l` -gt 1 ]; then \
			echo "removing" $DEF; \
			sed -i "s/${DEF}/${CH}/" arch/arm/mach-omap1/devices.c; \
			sed -i "/${DDEF}/d" arch/arm/mach-omap1/dma.h; \
		fi; \
	done

Signed-off-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-06-18 00:12:34 -07:00
Jarkko Nikula c821c4628a ARM: OMAP1: Remove McBSP DMA channel definitions
arch/arm/mach-omap1/mcbsp.c is only place where OMAP1 McBSP DMA channel
definitions are set. We may well use numerical values there and get rid
of their definitions in arch/arm/mach-omap1/dma.h.

Remove dma.h include from arch/arm/mach-omap1/mcbsp.c and use following
script for replacing definitions with DMA channel number:

egrep '#define OMAP_DMA_MCBSP' arch/arm/mach-omap1/dma.h | cut -f 1,3 \
	| while read i; do \
		DEF=`echo $i |cut -d ' ' -f 2`; \
		CH=`echo $i |cut -d ' ' -f 3`; \
		echo "removing" $DEF; \
		sed -i "s/${DEF}/${CH}/" arch/arm/mach-omap1/mcbsp.c; \
		sed -i "/${DEF}/d" arch/arm/mach-omap1/dma.h; \
	done

Signed-off-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-06-18 00:12:34 -07:00
Stephen Boyd 38ff87f77a sched_clock: Make ARM's sched_clock generic for all architectures
Nothing about the sched_clock implementation in the ARM port is
specific to the architecture. Generalize the code so that other
architectures can use it by selecting GENERIC_SCHED_CLOCK.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
[jstultz: Merge minor collisions with other patches in my tree]
Signed-off-by: John Stultz <john.stultz@linaro.org>
2013-06-12 14:02:13 -07:00
Suman Anna c869c75c16 mailbox/omap: move the OMAP mailbox framework to drivers
The mailbox hardware (in OMAP) uses a queued mailbox interrupt
mechanism that provides a communication channel between processors
through a set of registers and their associated interrupt signals
by sending and receiving messages.

The OMAP mailbox framework/driver code is moved to be under
drivers/mailbox, in preparation for adapting to a common mailbox
driver framework. This allows the build for OMAP mailbox to be
enabled (it was disabled during the multi-platform support).

As part of the migration from plat and mach code:
- Kconfig symbols have been renamed to build OMAP1 or OMAP2+ drivers.
- mailbox.h under plat-omap/plat/include has been split into a public
  and private header files. The public header has only the API related
  functions and types.
- The module name mailbox.ko from plat-omap is changed to
  omap-mailbox.ko
- The module name mailbox_mach.ko from mach-omapX is changed as
    mailbox_omap1.ko for OMAP1
    mailbox_omap2.ko for OMAP2+

Cc: Tony Lindgren <tony@atomide.com>
[gregkh@linuxfoundation.org: ack for staging part]
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Omar Ramirez Luna <omar.ramirez@copitl.com>
Signed-off-by: Suman Anna <s-anna@ti.com>
2013-06-11 11:41:51 -05:00