Commit Graph

59 Commits

Author SHA1 Message Date
Masahiro Yamada 172caf1993 kbuild: remove redundant target cleaning on failure
Since commit 9c2af1c737 ("kbuild: add .DELETE_ON_ERROR special
target"), the target file is automatically deleted on failure.

The boilerplate code

  ... || { rm -f $@; false; }

is unneeded.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-01-06 09:46:51 +09:00
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00
Phil Edworthy b6397435ec sh: Add RSK2+SH7269 board
The RSK2+SH7269 board uses the SH7269 processor. It is often
referred to as just rsk7269. NOR Flash, SDRAM, serial, USB Host and
ethernet are working.

Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-10 17:20:01 +09:00
Phil Edworthy d584e204ff sh: Add RSK2+SH7264 board
The RSK2+SH7264 board uses the sh7264 processor. It is often
referred to as just rsk7264. NOR Flash, SDRAM, serial, USB Host and
ethernet are working.

Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-10 11:49:56 +09:00
Paul Mundt 8a453cac94 sh: Add support for AP-SH4AD-0A board.
This adds preliminary support for the alpha project AP-SH4AD-0A reference
platform (SH7786 based).

Additional platform information available at:

	http://www.apnet.co.jp/product/superh/ap-sh4ad-0a.html

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-13 18:36:21 +09:00
Paul Mundt bc34b0850b sh: Add support for AP-SH4A-3A board.
This adds preliminary support for the alpha project AP-SH4A-3A reference
platform (SH7785 based).

Additional paltform information available at:

	http://www.apnet.co.jp/product/superh/ap-sh4a-3a.html

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-13 18:32:42 +09:00
Paul Mundt 704bf317fd sh: Add a new mach type for alpha project boards.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-13 18:31:25 +09:00
Paul Mundt 2504075d38 sh: mach-systemh: Kill off dead board.
This code has been untouched since it was merged many years ago, and has
severely bitrotted since, suggesting that the board has no real users
left. Notice of intent to remove has been sent out over the last few
years, with no takers. Kill it off.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-29 19:11:56 +09:00
Yoshihiro Shimoda 36239c6704 sh: add sh7757lcr board support
This adds preliminary support for the sh7757lcr board.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-07-06 17:38:32 +09:00
Hitoshi Mitake 3a59826443 sh: SH-2007 board support.
This patch series adds support for ITO Co., Ltd.'s SH-2007 reference
platform (A PC-104 based SH7780 platform).

This is a direct port of the out-of-tree board support from the vendor's
kernel, originally located at:

	http://ms-n.org/sh-linux/kernel/

More information on the board and the vendor can be obtained from the
vendor's site at:

	http://www.itonet.co.jp/

Presently supported peripherals are CF and ethernet, with support for
the on-board IDE still pending further testing.

Reviewed-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Reviewed-by: Magnus Damm <magnus.damm@gmail.com>
Signed-off-by: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-06-21 15:10:51 +09:00
Paul Mundt 0c54de146e Merge branch 'sh/stable-updates' 2010-01-18 20:47:37 +09:00
Paul Mundt 02bf6cc72c sh: Preliminary SDK7786 board support.
This stubs in some preliminary board support for the RTE SDK7786.

This is quite stunted at the moment, and primarily builds on top of the
system FPGA. FPGA IRQs are handled via CPU IRL masking for simplicity,
with initial peripheral support restricted to the debug ethernet.

Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-14 20:58:58 +09:00
Michal Marek 07105202bd Makefile: do not override LC_CTYPE
Setting LC_CTYPE=C breaks localized messages in some setups. With only
LC_COLLATE=C and LC_NUMERIC=C, we get almost all we need, except for not
so defined character classes and tolower()/toupper(). The former is not
a big issue, because we can assume that e.g. [:alpha:] will always
include a-zA-Z and we only ever process ASCII input. The latter seems
only affect arch/sh/tools/gen-mach-types, which we can handle separately.

So after this patch the meaning of ranges like [a-z], the behavior of
sort and join, etc. should be the same everywhere and at the same time
gcc should be able to print localized waring and error messages.
LC_NUMERIC=C might not be necessary, but setting it doesn't hurt.

Reported-by: Simon Horman <horms@verge.net.au>
Reported-by: Sergei Trofimovich <slyfox@inbox.ru>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Tested-by: Simon Horman <horms@verge.net.au>
Tested-by: Masami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-01-13 13:27:24 +01:00
Sam Ravnborg 3252b11fc4 sh: move machtypes.h to include/generated
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2009-12-12 13:08:14 +01:00
Yoshihiro Shimoda e79d57479c sh: sh7785lcr: fix prototype board on 32bit MMU mode.
Fix up PCA9564 resources on 32bit MMU mode using prototype board.

Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Tested-by: Raul Porcel <armin76@gentoo.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-28 10:19:13 +09:00
Paul Mundt e638fab91e sh: Add mach-types entry for EcoVec board.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-20 10:14:29 +09:00
Magnus Damm 5bdef865eb sh: kfr2r09 board support - mach-type and defconfig
This patch adds a defconfig and a mach-types entry for
the kfr2r09 board.

At this point only a few devices like SCIF, KEYSC and
NOR Flash are supported together with sh7724 devices
such as IIC0, IIC1 and the multimedia blocks exported
via UIO.

Kexec is supported, but booting from flash is not (yet).

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-07-23 18:43:16 +09:00
Paul Mundt 5b25ab29ba sh: Record ms7724se in mach-types.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-26 17:02:18 +09:00
Steve Glendinning eaeed5d31d sh: add support for SMSC Polaris platform
Polaris is an SMSC reference platform with a SH7709S CPU and LAN9118
ethernet controller.  This patch adds support for it.

Updated following feedback from Nobuhiro Iwamatsu.

Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com>
Reviewed-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-21 01:26:33 +09:00
Nobuhiro Iwamatsu 32910e2c52 sh: espt-giga board support
This adds support for the ESPT-Giga (Ethernet Serial Parallel
Translator) SH7763-based reference board.

Board support is relatively sparse, presently supporting serial,
gigabit ethernet, USB host, and MTD.

More information (in Japanese) available at:

	http://www.cente.jp/product/cente_hard/ESPT-Giga.html

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-17 15:18:52 +09:00
Kuninori Morimoto 5ac072e110 sh: Urquell board support.
This adds preliminary support for the SH7786-based Urquell board.

Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-03 16:22:00 +09:00
Paul Mundt ea0aac1e13 sh: Consolidate rsk7203/7201 in to a new mach-rsk.
RSK+ platforms have quite a few characteristics in common, so roll them
together in to a shiny new RSK mach-type.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:44:02 +09:00
Peter Griffin 6feb348783 sh: RSK+ 7201 board support.
This patch adds support for the RTE RSK+ 7201 board.

Signed-off-by: Peter Griffin <pgriffin@mpc-data.co.uk>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:43:51 +09:00
Paul Mundt 3eeebf17f3 sh: Kill off long-dead HD64465 cchip support.
This code has been dead for many years. The last update it received
was in 2003 in order to update it for the driver model changes, though
it had already been in disarray and unused before that point. The only
boards that ever used this chip have not had users in many years either,
so it is finally safe to just kill it off and move on with life.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-28 20:07:44 +09:00
Paul Mundt 4ad06dd6f1 sh: Add EDOSK7760 mach type.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-09-08 12:01:55 +09:00
Paul Mundt 4385e12b29 sh: Revert the location change of auto-generated asm/machtypes.h
This ended up causing build breakage on O= builds, as reported by Adrian:

<--  snip  -->

...
  CC      init/main.o
In file included from /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/sh/include/asm/irq.h:4,
                 from /home/bunk/linux/kernel-2.6/git/linux-2.6/include/linux/irq.h:23,
                 from /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/sh/include/asm/hardirq.h:5,
                 from /home/bunk/linux/kernel-2.6/git/linux-2.6/include/linux/hardirq.h:7,
                 from /home/bunk/linux/kernel-2.6/git/linux-2.6/include/asm-generic/local.h:5,
                 from /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/sh/include/asm/local.h:4,
                 from /home/bunk/linux/kernel-2.6/git/linux-2.6/include/linux/module.h:19,
                 from /home/bunk/linux/kernel-2.6/git/linux-2.6/init/main.c:13:
/home/bunk/linux/kernel-2.6/git/linux-2.6/arch/sh/include/asm/machvec.h:15:27:
error: asm/machtypes.h: No such file or directory
make[2]: *** [init/main.o] Error 1

<--  snip  -->

So we simply move machtypes.h back to its original place. asm-offsets.h is
still generated there regardless, until such a time that we find a better place
to stash auto-generated files.

Reported-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-08-02 07:14:09 +09:00
Paul Mundt f15cbe6f1a sh: migrate to arch/sh/include/
This follows the sparc changes a439fe51a1.

Most of the moving about was done with Sam's directions at:

http://marc.info/?l=linux-sh&m=121724823706062&w=2

with subsequent hacking and fixups entirely my fault.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-29 08:09:44 +09:00
Yoshihiro Shimoda cbe9da029d sh: Renesas R0P7785LC0011RL board support
This adds initial support for the Renesas R0P7785LC0011RL board.
This patch supports 29bit address mode only.

Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28 18:10:35 +09:00
Nobuhiro Iwamatsu 4cec1a37ba sh: Renesas Solutions SH7763RDP board support
This patch adds basic support for the SH7763RDP board.
This supports a basic stuff provided in SH7763, like SCIF,
NOR Flash and USB host.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28 18:10:30 +09:00
Yusuke Goda 04e917b606 sh: Add support Renesas Solutions AP-325RXA board
This board is SH7723 base board.

This has SCIF, LCDC, USB Host controler, NOR/NAND Flash, Sound,
Ether and other.

This patch supports SCIF, NOR Flash.

Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28 18:10:29 +09:00
Paul Mundt 3787aa112c sh: RSK+ 7203 board support.
This adds initial support for the RTE RSK+ SH7203 board.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28 18:10:28 +09:00
Adrian Bunk f5f826c685 sh: remove the broken SH_MPC1211 support
SH_MPC1211 has been marked as BROKEN for some time.

Unless someone is working on reviving it now, I'd therefore suggest this
patch to remove it.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-08 19:51:39 +09:00
Paul Mundt 8ed6dfdd09 sh: Fix up mach-types formatting from merge damage.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-04-18 09:50:05 -07:00
Yoshihiro Shimoda 6e862995a0 sh: Add support for Solution Engine SH7721 board
Add support for Solution Engine SH7721 board(MS7721RP01).

Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-04-18 09:50:02 -07:00
Paul Mundt e7d7deca60 sh: Fix up SH7710 VoIP-GW build.
The only board-specific bits that existed here were for setting up the
IRQs, which are now handled by the SH7710 CPU support code instead. As
there's nothing else to do for setup, kill off the board support code
and have the defconfig use the generic machvec instead.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-03-06 16:08:00 +09:00
Paul Mundt 9216f194e4 sh: Add mach-type entries for MigoR and SDK7780.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-02-14 14:22:08 +09:00
Paul Mundt a5350a9686 sh: Kill off dead HS771RVoIP board support.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:19:03 +09:00
Paul Mundt 03713bd226 sh: Move mach-cayman in with the rest of the boards.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:56 +09:00
Paul Mundt 0b532f5773 sh: mach-type updates.
This adds in the x3proto and magicpanelr2 mach types, plugs in
highlander and rts7751r2d groups, and also hooks up the r2d
subtypes.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-11-02 14:28:07 +09:00
Magnus Damm d89ddd1c84 sh: remove support for sh7300 and solution engine 7300
This patch removes old dead code:
- kill off sh7300 cpu support
- get rid of broken solution engine 7300 board support

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-26 15:37:57 +09:00
Paul Mundt 3c6b6c7fb7 sh: Kill the rest of the SE73180 cruft.
There was a stray header, and the mach-type removal was also
missed.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-26 15:34:56 +09:00
Erik Johansson 8cb661d6a4 sh: fix race in parallel out-of-tree build
Depending on which of the three dependencies for archprepare (in
arch/sh/Makefile) get built first, the directory include/asm-sh may or
may not exist when the maketools target is built. If the directory does
not exist, awk will fail to generate machtypes.h. This patch fixes this
by creating the directory before awk is executed.

Signed-off-by: Erik Johansson <erik.johansson@motorola.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-12 16:37:00 +09:00
Paul Mundt b9601c5e59 sh: Kill off dead SH7604 support.
This was added during 2.5.x, but was never moved along. This
can easily be resurrected if someone has one they wish to work
with, but it's not worth keeping around in its current form.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-08 11:55:28 +09:00
Nobuhiro Iwamatsu 678597be5e sh: Add L-BOX RE2 to mach-types.
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-08 02:43:42 +00:00
Paul Mundt 27641dee99 sh: Fix up various compile warnings for SE boards.
- setup-sh7750.c only defines the sh7751_ipr_map when building
  with SH7751 support.

- 7722 Solution Engine was missing a mach-type entry, causing
  the macro in cf-enabler to be undefined.

- arch/sh/mm/init.c needs linux/pagemap.h.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-21 14:32:47 +09:00
Nobuhiro Iwamatsu b75762302e sh: SH7780 Solution Engine board support.
This adds support for the SH7780-based Solution Engine reference board.

Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.zh@hitachi.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-07 02:11:55 +00:00
Paul Mundt 32351a28a7 sh: Add SH7785 Highlander board support (R7785RP).
This adds preliminary support for the SH7785-based Highlander board.
Some of the Highlander support code is reordered so that most of it
can be reused directly.

This also plugs in missing SH7785 checks in the places that need it,
as this is the first board to support the CPU.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-07 02:10:53 +00:00
Paul Mundt e65fa9f59e sh: Kill off dead bigsur and ec3104 boards.
Neither of these have had any maintenance in years, and there's
no interest in keeping them straggling along. These have already
been slated for removal some time, so finally just get rid of them.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-02-14 15:06:09 +09:00
Yoshinori Sato 9d4436a6fb sh: Add support for SH7206 and SH7619 CPU subtypes.
This implements initial support for the SH7206 (SH-2A) and SH7619
(SH-2) MMU-less CPUs.

Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06 10:45:36 +09:00
Paul Mundt 2914d4da17 sh: Kill off remaining config.h references.
A few of these managed to sneak back in, get rid of them once
and for all.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-10-03 13:19:02 +09:00