Commit Graph

2698 Commits

Author SHA1 Message Date
Paul Gortmaker 70c7160619 Add appropriate <linux/prefetch.h> include for prefetch users
After discovering that wide use of prefetch on modern CPUs
could be a net loss instead of a win, net drivers which were
relying on the implicit inclusion of prefetch.h via the list
headers showed up in the resulting cleanup fallout.  Give
them an explicit include via the following $0.02 script.

 =========================================
 #!/bin/bash
 MANUAL=""
 for i in `git grep -l 'prefetch(.*)' .` ; do
 	grep -q '<linux/prefetch.h>' $i
 	if [ $? = 0 ] ; then
 		continue
 	fi

 	(	echo '?^#include <linux/?a'
 		echo '#include <linux/prefetch.h>'
 		echo .
 		echo w
 		echo q
 	) | ed -s $i > /dev/null 2>&1
 	if [ $? != 0 ]; then
 		echo $i needs manual fixup
 		MANUAL="$i $MANUAL"
 	fi
 done
 echo ------------------- 8\<----------------------
 echo vi $MANUAL
 =========================================

Signed-off-by: Paul <paul.gortmaker@windriver.com>
[ Fixed up some incorrect #include placements, and added some
  non-network drivers and the fib_trie.c case    - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-22 21:41:57 -07:00
Linus Torvalds 06f4e926d2 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1446 commits)
  macvlan: fix panic if lowerdev in a bond
  tg3: Add braces around 5906 workaround.
  tg3: Fix NETIF_F_LOOPBACK error
  macvlan: remove one synchronize_rcu() call
  networking: NET_CLS_ROUTE4 depends on INET
  irda: Fix error propagation in ircomm_lmp_connect_response()
  irda: Kill set but unused variable 'bytes' in irlan_check_command_param()
  irda: Kill set but unused variable 'clen' in ircomm_connect_indication()
  rxrpc: Fix set but unused variable 'usage' in rxrpc_get_transport()
  be2net: Kill set but unused variable 'req' in lancer_fw_download()
  irda: Kill set but unused vars 'saddr' and 'daddr' in irlan_provider_connect_indication()
  atl1c: atl1c_resume() is only used when CONFIG_PM_SLEEP is defined.
  rxrpc: Fix set but unused variable 'usage' in rxrpc_get_peer().
  rxrpc: Kill set but unused variable 'local' in rxrpc_UDP_error_handler()
  rxrpc: Kill set but unused variable 'sp' in rxrpc_process_connection()
  rxrpc: Kill set but unused variable 'sp' in rxrpc_rotate_tx_window()
  pkt_sched: Kill set but unused variable 'protocol' in tc_classify()
  isdn: capi: Use pr_debug() instead of ifdefs.
  tg3: Update version to 3.119
  tg3: Apply rx_discards fix to 5719/5720
  ...

Fix up trivial conflicts in arch/x86/Kconfig and net/mac80211/agg-tx.c
as per Davem.
2011-05-20 13:43:21 -07:00
Benjamin Herrenschmidt 880102e785 Merge remote branch 'origin/master' into merge
Manual merge of arch/powerpc/kernel/smp.c and add missing scheduler_ipi()
call to arch/powerpc/platforms/cell/interrupt.c

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-05-20 15:36:52 +10:00
Benjamin Herrenschmidt 4c8440666b Merge branch 'merge' into next 2011-05-19 17:00:06 +10:00
Roland Dreier 1df9fad122 Merge branches 'cma', 'cxgb4' and 'qib' into for-next 2011-05-12 08:57:20 -07:00
Sergei Shtylyov 1c65335714 IB/qib: Use pci_dev->revision
The driver reads PCI revision ID from the PCI configuration register
while it's already stored by PCI subsystem in the revision field of
struct pci_dev.

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Acked-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-05-12 08:57:12 -07:00
David S. Miller 5fc3590c81 infiniband: Remove rt->rt_src usage in addr4_resolve()
Use an explicit flow key and fetch it from there.

Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-10 13:32:48 -07:00
Roland Dreier d0c49bf391 RDMA/iwcm: Get rid of enum iw_cm_event_status
The IW_CM_EVENT_STATUS_xxx values were used in only a couple of places;
cma.c uses -Exxx values instead, and so do the amso1100, cxgb3 and cxgb4
drivers -- only nes was using the enum values (with the mild consequence
that all nes connection failures were treated as generic errors rather
than reported as timeouts or rejections).

We can fix this confusion by getting rid of enum iw_cm_event_status and
using a plain int for struct iw_cm_event.status, and converting nes to
use -Exxx as the other iWARP drivers do.

This also gets rid of the warning

    drivers/infiniband/core/cma.c: In function 'cma_iw_handler':
    drivers/infiniband/core/cma.c:1333:3: warning: case value '4294967185' not in enumerated type 'enum iw_cm_event_status'
    drivers/infiniband/core/cma.c:1336:3: warning: case value '4294967186' not in enumerated type 'enum iw_cm_event_status'
    drivers/infiniband/core/cma.c:1332:3: warning: case value '4294967192' not in enumerated type 'enum iw_cm_event_status'

Signed-off-by: Roland Dreier <roland@purestorage.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Reviewed-by: Faisal Latif <faisal.latif@intel.com>
2011-05-09 22:23:57 -07:00
Sergei Shtylyov ec03d6777a IB/ipath: Use pci_dev->revision, again
Commit 44c10138fd ("PCI: Change all drivers to use pci_device->revision")
already converted this driver to using the revision field of struct
pci_dev but commit bb9171448d ("IB/ipath: Misc changes to prepare
for IB7220 introduction") later reverted that change for some strange
reason.  Restore the change.

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Acked-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-05-09 22:07:31 -07:00
Mitko Haralanov 9f5754e34b IB/qib: Prevent driver hang with unprogrammed boards
The time limit test now correctly checks against current jiffies to
avoid the hang.

Signed-off-by: Mitko Haralanov <mitko@qlogic.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-05-09 22:07:31 -07:00
Steve Wise 2f25e9a540 RDMA/cxgb4: EEH errors can hang the driver
A few more EEH fixes:

c4iw_wait_for_reply(): detect fatal EEH condition on timeout and
return an error.

The iw_cxgb4 driver was only calling ib_deregister_device() on an EEH
event followed by a ib_register_device() when the device was
reinitialized.  However, the RDMA core doesn't allow multiple
iterations of register/deregister by the provider. See
drivers/infiniband/core/sysfs.c: ib_device_unregister_sysfs() where
the kobject ref is held until the device is deallocated in
ib_deallocate_device().  Calling deregister adds this kobj reference,
and then a subsequent register call will generate a WARN_ON() from the
kobject subsystem because the kobject is being initialized but is
already initialized with the ref held.

So the provider must deregister and dealloc when resetting for an EEH
event, then alloc/register to re-initialize.  To do this, we cannot
use the device ptr as our ULD handle since it will change with each
reallocation.  This commit adds a ULD context struct which is used as
the ULD handle, and then contains the device pointer and other state
needed.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-05-09 22:06:23 -07:00
Steve Wise d9594d990a RDMA/cxgb4: Reset wait condition atomically
The driver was never really waiting for RDMA_WR/FINI completions
because the condition variable used to determine if the completion
happened was never reset, and this condition variable is reused for
both connection setup and teardown.  This causes various driver
crashes under heavy loads due to releasing resources too early.

The fix is to use atomic bits to correctly reset the condition
immediately after the completion is detected.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-05-09 22:06:22 -07:00
Roel Kluin 85d215b0f3 RDMA/cxgb4: Fix missing parentheses
Parens are missing: '|' has a higher presedence than '?'.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Acked-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-05-09 22:06:22 -07:00
Steve Wise bbe9a0a2bc RDMA/cxgb4: Initialization errors can cause crash
c4iw_uld_add() must return ERR_PTR() values instead of NULL on failure.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-05-09 22:06:22 -07:00
Steve Wise 30c95c2d49 RDMA/cxgb4: Don't change QP state outside EP lock
Concurrent ingress CLOSE and ULP ABORT operations causes a crash due
to a race condition where the close path releases the EP lock and then
tries to move the QP state to CLOSED.  This must be done inside the EP
lock to avoid the race.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-05-09 22:06:22 -07:00
Hefty, Sean a9bb79128a RDMA/cma: Add an ID_REUSEADDR option
Lustre requires that clients bind to a privileged port number before
connecting to a remote server.  On larger clusters (typically more
than about 1000 nodes), the number of privileged ports is exhausted,
resulting in lustre being unusable.

To handle this, we add support for reusable addresses to the rdma_cm.
This mimics the behavior of the socket option SO_REUSEADDR.  A user
may set an rdma_cm_id to reuse an address before calling
rdma_bind_addr() (explicitly or implicitly).  If set, other
rdma_cm_id's may be bound to the same address, provided that they all
have reuse enabled, and there are no active listens.

If rdma_listen() is called on an rdma_cm_id that has reuse enabled, it
will only succeed if there are no other id's bound to that same
address.  The reuse option is exported to user space.  The behavior of
the kernel reuse implementation was verified against that given by
sockets.

This patch is derived from a path by Ira Weiny <weiny2@llnl.gov>

Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-05-09 22:06:10 -07:00
Hefty, Sean 43b752daae RDMA/cma: Fix handling of IPv6 addressing in cma_use_port
cma_use_port() assumes that the sockaddr is an IPv4 address.  Since
IPv6 addressing is supported (and also to support other address
families) make the code more generic in its address handling.

Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-05-09 22:06:10 -07:00
David S. Miller 31e4543db2 ipv4: Make caller provide on-stack flow key to ip_route_output_ports().
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-03 20:25:42 -07:00
David Decotigny 7073949720 ethtool: cosmetic: Use ethtool ethtool_cmd_speed API
This updates the network drivers so that they don't access the
ethtool_cmd::speed field directly, but use ethtool_cmd_speed()
instead.

For most of the drivers, these changes are purely cosmetic and don't
fix any problem, such as for those 1GbE/10GbE drivers that indirectly
call their own ethtool get_settings()/mii_ethtool_gset(). The changes
are meant to enforce code consistency and provide robustness with
future larger throughputs, at the expense of a few CPU cycles for each
ethtool operation.

All drivers compiled with make allyesconfig ion x86_64 have been
updated.

Tested: make allyesconfig on x86_64 + e1000e/bnx2x work
Signed-off-by: David Decotigny <decot@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-29 14:03:01 -07:00
Lucas De Marchi e9c549998d Revert wrong fixes for common misspellings
These changes were incorrectly fixed by codespell. They were now
manually corrected.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-04-26 23:31:11 -07:00
Nishanth Aravamudan e297d9dd5c cxgb4: use pgprot_writecombine() on powerpc
Commit fe3cc0d99d ("powerpc: Add
pgprot_writecombine") in benh's tree exposes the pgprot_writecombine()
API to drivers on powerpc. cxgb4 has an open-coded version of the same,
so use the common API now that it's available.

Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Cc: Steve Wise <swise@opengridcomputing.com>
Cc: Anton Blanchard <anton@samba.org>
Acked-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-04-27 14:18:25 +10:00
Michał Mirosław 3d96c74d89 net: infiniband/ulp/ipoib: convert to hw_features
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-20 01:30:42 -07:00
Michał Mirosław dd6f6d0249 net: infiniband/hw/nes: convert to hw_features
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-20 01:30:41 -07:00
Lucas De Marchi 25985edced Fix common misspellings
Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31 11:26:23 -03:00
Linus Torvalds dc50eddb2f Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  RDMA/nes: Fix test of uninitialized netdev
2011-03-25 21:06:37 -07:00
Linus Torvalds 00a2470546 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (56 commits)
  route: Take the right src and dst addresses in ip_route_newports
  ipv4: Fix nexthop caching wrt. scoping.
  ipv4: Invalidate nexthop cache nh_saddr more correctly.
  net: fix pch_gbe section mismatch warning
  ipv4: fix fib metrics
  mlx4_en: Removing HW info from ethtool -i report.
  net_sched: fix THROTTLED/RUNNING race
  drivers/net/a2065.c: Convert release_resource to release_region/release_mem_region
  drivers/net/ariadne.c: Convert release_resource to release_region/release_mem_region
  bonding: fix rx_handler locking
  myri10ge: fix rmmod crash
  mlx4_en: updated driver version to 1.5.4.1
  mlx4_en: Using blue flame support
  mlx4_core: reserve UARs for userspace consumers
  mlx4_core: maintain available field in bitmap allocator
  mlx4: Add blue flame support for kernel consumers
  mlx4_en: Enabling new steering
  mlx4: Add support for promiscuous mode in the new steering model.
  mlx4: generalization of multicast steering.
  mlx4_en: Reporting HW revision in ethtool -i
  ...
2011-03-25 21:02:22 -07:00
Roland Dreier cf55bb2439 RDMA/nes: Fix test of uninitialized netdev
Commit 1765a57533 ("net: make dev->master general") introduced a
test of an uninitialized netdev.  Fix the code so the intended netdev
is tested.

Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-03-24 17:18:30 -07:00
Linus Torvalds 0625bef606 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  IB: Increase DMA max_segment_size on Mellanox hardware
  IB/mad: Improve an error message so error code is included
  RDMA/nes: Don't print success message at level KERN_ERR
  RDMA/addr: Fix return of uninitialized ret value
  IB/srp: try to use larger FMR sizes to cover our mappings
  IB/srp: add support for indirect tables that don't fit in SRP_CMD
  IB/srp: rework mapping engine to use multiple FMR entries
  IB/srp: allow sg_tablesize to be set for each target
  IB/srp: move IB CM setup completion into its own function
  IB/srp: always avoid non-zero offsets into an FMR
2011-03-24 07:59:46 -07:00
Yevgeny Petrilin 0345584e0b mlx4: generalization of multicast steering.
The same packet steering mechanism would be used both for IB and Ethernet,
Both multicasts and unicasts.
This commit prepares the general infrastructure for this.

Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-23 12:24:21 -07:00
Yevgeny Petrilin 725c89997e mlx4_en: Reporting HW revision in ethtool -i
HW revision is derived from device ID and rev id.

Signed-off-by: Eugenia Emantayev <eugenia@mellanox.co.il>
Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-23 12:24:20 -07:00
Roland Dreier ba82638247 Merge branches 'misc', 'nes' and 'srp' into for-next 2011-03-23 11:13:37 -07:00
David Dillow 7f9e5c48c1 IB: Increase DMA max_segment_size on Mellanox hardware
By default, each device is assumed to be able only handle 64 KB chunks
during DMA. By giving the segment size a larger value, the block layer
will coalesce more S/G entries together for SRP, allowing larger
requests with the same sg_tablesize setting.  The block layer is the
only direct user of it, though a few IOMMU drivers reference it as
well for their *_map_sg coalescing code. pci-gart_64 on x86, and a
smattering on on sparc, powerpc, and ia64.

Since other IB protocols could potentially see larger segments with
this, let's check those:

 - iSER is fine, because you limit your maximum request size to 512
   KB, so we'll never overrun the page vector in struct iser_page_vec
   (128 entries currently). It is independent of the DMA segment size,
   and handles multi-page segments already.

 - IPoIB is fine, as it maps each page individually, and doesn't use
   ib_dma_map_sg().

 - RDS appears to do the right thing and has no dependencies on DMA
   segment size, but I don't claim to have done a complete audit.

 - NFSoRDMA and 9p are OK -- they do not use ib_dma_map_sg(), so they
   doesn't care about the coalescing.

 - Lustre's ko2iblnd does not care about coalescing -- it properly
   walks the returned sg list.

This patch ups the value on Mellanox hardware to 1 GB, which matches
reported firmware limits on mlx4.

Signed-off-by: David Dillow <dillowda@ornl.gov>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-03-22 09:39:18 -07:00
Roland Dreier 071c778347 Merge branch 'external-indirect' of git://git.kernel.org/pub/scm/linux/kernel/git/dad/srp-initiator into srp 2011-03-21 11:52:00 -07:00
Michael Heinz 1eba843dd7 IB/mad: Improve an error message so error code is included
Signed-off-by: Michael Heinz <michael.heinz@qlogic.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-03-18 09:42:20 -07:00
Roland Dreier 748bfd9c1d RDMA/nes: Don't print success message at level KERN_ERR
There's no reason to print "NetEffect RNIC driver successfully loaded" 
at level KERN_ERR (where it will uglify the console on a quiet boot).
Change it to KERN_INFO.

Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-03-18 08:52:30 -07:00
Linus Torvalds ec0afc9311 Merge branch 'kvm-updates/2.6.39' of git://git.kernel.org/pub/scm/virt/kvm/kvm
* 'kvm-updates/2.6.39' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (55 commits)
  KVM: unbreak userspace that does not sets tss address
  KVM: MMU: cleanup pte write path
  KVM: MMU: introduce a common function to get no-dirty-logged slot
  KVM: fix rcu usage in init_rmode_* functions
  KVM: fix kvmclock regression due to missing clock update
  KVM: emulator: Fix permission checking in io permission bitmap
  KVM: emulator: Fix io permission checking for 64bit guest
  KVM: SVM: Load %gs earlier if CONFIG_X86_32_LAZY_GS=n
  KVM: x86: Remove useless regs_page pointer from kvm_lapic
  KVM: improve comment on rcu use in irqfd_deassign
  KVM: MMU: remove unused macros
  KVM: MMU: cleanup page alloc and free
  KVM: MMU: do not record gfn in kvm_mmu_pte_write
  KVM: MMU: move mmu pages calculated out of mmu lock
  KVM: MMU: set spte accessed bit properly
  KVM: MMU: fix kvm_mmu_slot_remove_write_access dropping intermediate W bits
  KVM: Start lock documentation
  KVM: better readability of efer_reserved_bits
  KVM: Clear async page fault hash after switching to real mode
  KVM: VMX: Initialize vm86 TSS only once.
  ...
2011-03-17 18:40:35 -07:00
Linus Torvalds c55d267de2 Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (170 commits)
  [SCSI] scsi_dh_rdac: Add MD36xxf into device list
  [SCSI] scsi_debug: add consecutive medium errors
  [SCSI] libsas: fix ata list corruption issue
  [SCSI] hpsa: export resettable host attribute
  [SCSI] hpsa: move device attributes to avoid forward declarations
  [SCSI] scsi_debug: Logical Block Provisioning (SBC3r26)
  [SCSI] sd: Logical Block Provisioning update
  [SCSI] Include protection operation in SCSI command trace
  [SCSI] hpsa: fix incorrect PCI IDs and add two new ones (2nd try)
  [SCSI] target: Fix volume size misreporting for volumes > 2TB
  [SCSI] bnx2fc: Broadcom FCoE offload driver
  [SCSI] fcoe: fix broken fcoe interface reset
  [SCSI] fcoe: precedence bug in fcoe_filter_frames()
  [SCSI] libfcoe: Remove stale fcoe-netdev entries
  [SCSI] libfcoe: Move FCOE_MTU definition from fcoe.h to libfcoe.h
  [SCSI] libfc: introduce __fc_fill_fc_hdr that accepts fc_hdr as an argument
  [SCSI] fcoe, libfc: initialize EM anchors list and then update npiv EMs
  [SCSI] Revert "[SCSI] libfc: fix exchange being deleted when the abort itself is timed out"
  [SCSI] libfc: Fixing a memory leak when destroying an interface
  [SCSI] megaraid_sas: Version and Changelog update
  ...

Fix up trivial conflicts due to whitespace differences in
drivers/scsi/libsas/{sas_ata.c,sas_scsi_host.c}
2011-03-17 17:54:40 -07:00
Sean Hefty 1bdd6384c2 RDMA/addr: Fix return of uninitialized ret value
Commit b23dd4fe42 ("ipv4: Make output route lookup return rtable
directly") resulted in leaving ret uninitialized, where it may later
be returned.

Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-03-17 17:00:19 -07:00
Huang Ying 0014bd990e mm: export __get_user_pages
In most cases, get_user_pages and get_user_pages_fast should be used
to pin user pages in memory.  But sometimes, some special flags except
FOLL_GET, FOLL_WRITE and FOLL_FORCE are needed, for example in
following patch, KVM needs FOLL_HWPOISON.  To support these users,
__get_user_pages is exported directly.

There are some symbol name conflicts in infiniband driver, fixed them too.

Signed-off-by: Huang Ying <ying.huang@intel.com>
CC: Andrew Morton <akpm@linux-foundation.org>
CC: Michel Lespinasse <walken@google.com>
CC: Roland Dreier <roland@kernel.org>
CC: Ralph Campbell <infinipath@qlogic.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-03-17 13:08:27 -03:00
Linus Torvalds 7a6362800c Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1480 commits)
  bonding: enable netpoll without checking link status
  xfrm: Refcount destination entry on xfrm_lookup
  net: introduce rx_handler results and logic around that
  bonding: get rid of IFF_SLAVE_INACTIVE netdev->priv_flag
  bonding: wrap slave state work
  net: get rid of multiple bond-related netdevice->priv_flags
  bonding: register slave pointer for rx_handler
  be2net: Bump up the version number
  be2net: Copyright notice change. Update to Emulex instead of ServerEngines
  e1000e: fix kconfig for crc32 dependency
  netfilter ebtables: fix xt_AUDIT to work with ebtables
  xen network backend driver
  bonding: Improve syslog message at device creation time
  bonding: Call netif_carrier_off after register_netdevice
  bonding: Incorrect TX queue offset
  net_sched: fix ip_tos2prio
  xfrm: fix __xfrm_route_forward()
  be2net: Fix UDP packet detected status in RX compl
  Phonet: fix aligned-mode pipe socket buffer header reserve
  netxen: support for GbE port settings
  ...

Fix up conflicts in drivers/staging/brcm80211/brcmsmac/wl_mac80211.c
with the staging updates.
2011-03-16 16:29:25 -07:00
David Dillow be8b981453 IB/srp: try to use larger FMR sizes to cover our mappings
Now that we can get larger SG lists, we can take advantage of HCAs that
allow us to use larger FMR sizes. In many cases, we can use up to 512
entries, so start there and work our way down.

Signed-off-by: David Dillow <dillowda@ornl.gov>
2011-03-15 19:41:30 -04:00
David Dillow c07d424d61 IB/srp: add support for indirect tables that don't fit in SRP_CMD
This allows us to guarantee the ability to submit up to 8 MB requests
based on the current value of SCSI_MAX_SG_CHAIN_SEGMENTS. While FMR will
usually condense the requests into 8 SG entries, it is imperative that
the target support external tables in case the FMR mapping fails or is
not supported.

We add a safety valve to allow targets without the needed support to
reap the benefits of the large tables, but fail in a manner that lets
the user know that the data didn't make it to the device. The user must
add "allow_ext_sg=1" to the target parameters to indicate that the
target has the needed support.

If indirect_sg_entries is not specified in the modules options, then
the sg_tablesize for the target will default to cmd_sg_entries unless
overridden by the target options.

Signed-off-by: David Dillow <dillowda@ornl.gov>
2011-03-15 19:37:23 -04:00
David Dillow 8f26c9ff9c IB/srp: rework mapping engine to use multiple FMR entries
Instead of forcing all of the S/G entries to fit in one FMR, and falling
back to indirect descriptors if that fails, allow the use of as many
FMRs as needed to map the request. This lays the groundwork for allowing
indirect descriptor tables that are larger than can fit in the command
IU, but should marginally improve performance now by reducing the number
of indirect descriptors needed.

We increase the minimum page size for the FMR pool to 4K, as larger
pages help increase the coverage of each FMR, and it is rare that the
kernel would send down a request with scattered 512 byte fragments.

This patch also move some of the target initialization code afte the
parsing of options, to keep it together with the new code that needs to
allocate memory based on the options given.

Signed-off-by: David Dillow <dillowda@ornl.gov>
2011-03-15 19:35:16 -04:00
David Dillow 4924864404 IB/srp: allow sg_tablesize to be set for each target
Different configurations of target software allow differing max sizes of
the command IU. Allowing this to be changed per-target allows all
targets on an initiator to get an optimal setting.

We deprecate srp_sg_tablesize and replace it with cmd_sg_entries in
preparation for allowing more indirect descriptors than can fit in the
IU.

Signed-off-by: David Dillow <dillowda@ornl.gov>
2011-03-15 19:35:05 -04:00
David Dillow 961e0be89a IB/srp: move IB CM setup completion into its own function
This is to clean up prior to further changes.

Signed-off-by: David Dillow <dillowda@ornl.gov>
2011-03-15 19:34:48 -04:00
David Dillow 8c4037b501 IB/srp: always avoid non-zero offsets into an FMR
It is unclear exactly how this code works around Mellanox SRP targets,
or if the problem is on the target side or in the HCA itself. In an
abundance of caution, we should always enable the workaround.

Signed-off-by: David Dillow <dillowda@ornl.gov>
2011-03-15 19:34:28 -04:00
Roland Dreier 043332cf28 Merge branches 'cma', 'cxgb4', 'ipath' and 'qib' into for-next 2011-03-15 10:58:04 -07:00
Sean Hefty a396d43a35 RDMA/cma: Replace global lock in rdma_destroy_id() with id-specific one
rdma_destroy_id currently uses the global rdma cm 'lock' to test if an
rdma_cm_id has been bound to a device.  This prevents an active
address resolution callback handler from assigning a device to the
rdma_cm_id after rdma_destroy_id checks for one.

Instead, we can replace the use of the global lock around the check to
the rdma_cm_id device pointer by setting the id state to destroying,
then flushing all active callbacks.  The latter is accomplished by
acquiring and releasing the handler_mutex.  Any active handler will
complete first, and any newly scheduled handlers will find the
rdma_cm_id in an invalid state.

In addition to optimizing the current locking scheme, the use of the
rdma_cm_id mutex is a more intuitive synchronization mechanism than
that of the global lock.  These changes are based on feedback from
Doug Ledford <dledford@redhat.com> while he was trying to debug a
crash in the rdma cm destroy path.

Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-03-15 10:57:34 -07:00
Sean Hefty 8d8ac86564 IB/cm: Cancel pending LAP message when exiting IB_CM_ESTABLISH state
This problem was reported by Moni Shoua <monis@mellanox.com> and Amir
Vadai <amirv@mellanox.com>:

	When destroying a cm_id from a context of a work queue and if
	the lap_state of this cm_id is IB_CM_LAP_SENT, we need to
	release the reference of this id that was taken upon the send
	of the LAP message.  Otherwise, if the expected APR message
	gets lost, it is only after a long time that the reference
	will be released, while during that the work handler thread is
	not available to process other things.

It turns out that we need to cancel any pending LAP messages whenever
we transition out of the IB_CM_ESTABLISH state.  This occurs when
disconnecting - either sending or receiving a DREQ.  It can also
happen in a corner case where we receive a REJ message after sending
an RTU, followed by a LAP.  Add checks and cancel any outstanding LAP
messages in these three cases.

Canceling the LAP when sending a DREQ fixes the destroy problem
reported by Moni.  When a cm_id is destroyed in the IB_CM_ESTABLISHED
state, it sends a DREQ to the remote side to notify the peer that the
connection is going away.

Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-03-15 10:56:12 -07:00
Sean Hefty 29963437a4 IB/cm: Bump reference count on cm_id before invoking callback
When processing a SIDR REQ, the ib_cm allocates a new cm_id.  The
refcount of the cm_id is initialized to 1.  However, cm_process_work
will decrement the refcount after invoking all callbacks.  The result
is that the cm_id will end up with refcount set to 0 by the end of the
sidr req handler.

If a user tries to destroy the cm_id, the destruction will proceed,
under the incorrect assumption that no other threads are referencing
the cm_id.  This can lead to a crash when the cm callback thread tries
to access the cm_id.

This problem was noticed as part of a larger investigation with kernel
crashes in the rdma_cm when running on a real time OS.

Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Acked-by: Doug Ledford <dledford@redhat.com>
Cc: <stable@kernel.org>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-03-15 10:56:12 -07:00