Commit Graph

246 Commits

Author SHA1 Message Date
Pawel Moll 1f1dd5889c ARM: vexpress: Enable regulator framework when MMCI is in use
The MMCI driver, when used with a Device Tree described device, relies
on the "vmmc" voltage regulator supply to set the OCR register voltage bits,
using MMC core's mmc_regulator_get_supply() function.

Without the regulator framework present there are no valid operating
voltages reported and the device initialisation fails:

mmci-pl18x 10005000.mmci: No vmmc regulator found
mmci-pl18x 10005000.mmci: no support for card's volts
mmc0: error -22 whilst initialising SD card

Signed-off-by: Pawel Moll <pawel.moll@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-28 21:57:07 +01:00
Pawel Moll 81cc3f868d ARM: vexpress: Remove non-DT code
Now, with the CLCD DT support available, there is no
more reason to keep the non-DT support for V2P-CA9.

Removed, together with "some" supporting code. It was
necessary to make PLAT_VERSATILE_SCHED_CLOCK optional
and selected by the machines still interested in it.

Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Pawel Moll <pawel.moll@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-28 16:08:16 +01:00
Alex Shi e160cc1768 vexpress/spc: fix a build warning on array bounds
With ARCH_VEXPRESS_SPC option, kernel build has the following
warning:

arch/arm/mach-vexpress/spc.c: In function ‘ve_spc_clk_init’:
arch/arm/mach-vexpress/spc.c:431:38: warning: array subscript is below array bounds [-Warray-bounds]
  struct ve_spc_opp *opps = info->opps[cluster];
                                      ^
since 'cluster' maybe '-1' in UP system. This patch does a active
checking to fix this issue.

Signed-off-by: Alex Shi <alex.shi@linaro.org>
Acked-by: Pawel Moll <pawel.moll@arm.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
2014-08-31 10:22:10 -07:00
Linus Torvalds 44c916d58b ARM: SoC cleanups for 3.17
This merge window brings a good size of cleanups on various
 platforms. Among the bigger ones:
 
 * Removal of Samsung s5pc100 and s5p64xx platforms. Both of these have
   lacked active support for quite a while, and after asking around nobody
   showed interest in keeping them around. If needed, they could be
   resurrected in the future but it's more likely that we would prefer
   reintroduction of them as DT and multiplatform-enabled platforms
   instead.
 * OMAP4 controller code register define diet. They defined a lot of registers
   that were never actually used, etc.
 * Move of some of the Tegra platform code (PMC, APBIO, fuse, powergate)
   to drivers/soc so it can be shared with 64-bit code. This also converts them
   over to traditional driver models where possible.
 * Removal of legacy gpio-samsung driver, since the last users have been
   removed (moved to pinctrl)
 
 Plus a bunch of smaller changes for various platforms that sort of
 dissapear in the diffstat for the above. clps711x cleanups, shmobile
 header file refactoring/moves for multiplatform friendliness, some misc
 cleanups, etc.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJT5DYPAAoJEIwa5zzehBx37egQAIiatNiLLqZnfo3rwGADRz/a
 POfPovktj68aPcobyzoyhFtToMqGvi9PpysyFTIQD2HJFG+5BtiIAuqtg0875zDe
 EpBWgsfugrm0YktJWAtUerj60oAmNPbKfaEm1cOOWuM2lb2mV+QkRrwSTAgsqkT7
 927BzMXKKBRPOVLL0RYhoF8EXa0Eg8kCqAHP8fJrzVYkRp+UrZJDnGiUP1XmWJN+
 VXQMu5SEjcPMtqT7+tfX455RfREHJfBcJ1ZN/dPF8HMWDwClQG0lyc6hifh1MxwO
 8DjIZNkfZeKqgDqVyC17re7pc7p8md5HL8WXbrKpK0A9vQ5bRexbPHxcwJ1T/C2Y
 465H+st5XXbuzV1gbMwjK1/ycsH0tCyffckk8Yl/2e1Fs7GgPNbAELtTdl+5vV1Y
 xmDXkyo/9WlRM3LQ23IGKwW7VzN86EfWVuShssfro0fO7xDdb4OOYLdQI+4bCG+h
 ytQYun1vU32OEyNik5RVNQuZaMrv2c93a3bID4owwuPHPmYOPVUQaqnRX/0E51eA
 aHZYbk2GlUOV3Kq5aSS4iyLg1Yj+I9/NeH9U+A4nc+PQ5FlgGToaVSCuYuw4DqbP
 AAG+sqQHbkBMvDPobQz/yd1qZbAb4eLhGy11XK1t5S65rApWI55GwNXnvbyxqt8x
 wpmxJTASGxcfuZZgKXm7
 =gbcE
 -----END PGP SIGNATURE-----

Merge tag 'cleanup-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC cleanups from Olof Johansson:
 "This merge window brings a good size of cleanups on various platforms.
  Among the bigger ones:

   - Removal of Samsung s5pc100 and s5p64xx platforms.  Both of these
     have lacked active support for quite a while, and after asking
     around nobody showed interest in keeping them around.  If needed,
     they could be resurrected in the future but it's more likely that
     we would prefer reintroduction of them as DT and
     multiplatform-enabled platforms instead.

   - OMAP4 controller code register define diet.  They defined a lot of
     registers that were never actually used, etc.

   - Move of some of the Tegra platform code (PMC, APBIO, fuse,
     powergate) to drivers/soc so it can be shared with 64-bit code.
     This also converts them over to traditional driver models where
     possible.

   - Removal of legacy gpio-samsung driver, since the last users have
     been removed (moved to pinctrl)

  Plus a bunch of smaller changes for various platforms that sort of
  dissapear in the diffstat for the above.  clps711x cleanups, shmobile
  header file refactoring/moves for multiplatform friendliness, some
  misc cleanups, etc"

* tag 'cleanup-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (117 commits)
  drivers: CCI: Correct use of ! and &
  video: clcd-versatile: Depend on ARM
  video: fix up versatile CLCD helper move
  MAINTAINERS: Add sdhci-st file to ARCH/STI architecture
  ARM: EXYNOS: Fix build breakge with PM_SLEEP=n
  MAINTAINERS: Remove Kirkwood
  ARM: tegra: Convert PMC to a driver
  soc/tegra: fuse: Set up in early initcall
  ARM: tegra: Always lock the CPU reset vector
  ARM: tegra: Setup CPU hotplug in a pure initcall
  soc/tegra: Implement runtime check for Tegra SoCs
  soc/tegra: fuse: fix dummy functions
  soc/tegra: fuse: move APB DMA into Tegra20 fuse driver
  soc/tegra: Add efuse and apbmisc bindings
  soc/tegra: Add efuse driver for Tegra
  ARM: tegra: move fuse exports to soc/tegra/fuse.h
  ARM: tegra: export apb dma readl/writel
  ARM: tegra: Use a function to get the chip ID
  ARM: tegra: Sort includes alphabetically
  ARM: tegra: Move includes to include/soc/tegra
  ...
2014-08-08 11:00:26 -07:00
Linus Torvalds 7725131982 ACPI and power management updates for 3.17-rc1
- ACPICA update to upstream version 20140724.  That includes
    ACPI 5.1 material (support for the _CCA and _DSD predefined names,
    changes related to the DMAR and PCCT tables and ARM support among
    other things) and cleanups related to using ACPICA's header files.
    A major part of it is related to acpidump and the core code used
    by that utility.  Changes from Bob Moore, David E Box, Lv Zheng,
    Sascha Wildner, Tomasz Nowicki, Hanjun Guo.
 
  - Radix trees for memory bitmaps used by the hibernation core from
    Joerg Roedel.
 
  - Support for waking up the system from suspend-to-idle (also known
    as the "freeze" sleep state) using ACPI-based PCI wakeup signaling
    (Rafael J Wysocki).
 
  - Fixes for issues related to ACPI button events (Rafael J Wysocki).
 
  - New device ID for an ACPI-enumerated device included into the
    Wildcat Point PCH from Jie Yang.
 
  - ACPI video updates related to backlight handling from Hans de Goede
    and Linus Torvalds.
 
  - Preliminary changes needed to support ACPI on ARM from Hanjun Guo
    and Graeme Gregory.
 
  - ACPI PNP core cleanups from Arjun Sreedharan and Zhang Rui.
 
  - Cleanups related to ACPI_COMPANION() and ACPI_HANDLE() macros
    (Rafael J Wysocki).
 
  - ACPI-based device hotplug cleanups from Wei Yongjun and
    Rafael J Wysocki.
 
  - Cleanups and improvements related to system suspend from
    Lan Tianyu, Randy Dunlap and Rafael J Wysocki.
 
  - ACPI battery cleanup from Wei Yongjun.
 
  - cpufreq core fixes from Viresh Kumar.
 
  - Elimination of a deadband effect from the cpufreq ondemand
    governor and intel_pstate driver cleanups from Stratos Karafotis.
 
  - 350MHz CPU support for the powernow-k6 cpufreq driver from
    Mikulas Patocka.
 
  - Fix for the imx6 cpufreq driver from Anson Huang.
 
  - cpuidle core and governor cleanups from Daniel Lezcano,
    Sandeep Tripathy and Mohammad Merajul Islam Molla.
 
  - Build fix for the big_little cpuidle driver from Sachin Kamat.
 
  - Configuration fix for the Operation Performance Points (OPP)
    framework from Mark Brown.
 
  - APM cleanup from Jean Delvare.
 
  - cpupower utility fixes and cleanups from Peter Senna Tschudin,
    Andrey Utkin, Himangi Saraogi, Rickard Strandqvist, Thomas Renninger.
 
 /
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABCAAGBQJT4nhtAAoJEILEb/54YlRxtZEP/2rtVQFSFdAW8l0Xm1SeSsl4
 EnZpSNT1TFn+NdG23vSIot5Jzdz1/dLfeoJEbXpoVt4DPC9/PK4HPlv5FEDQYfh5
 srftvvGcAva969sXzSBRNUeR+M8Yd2RdoYCfmqTEUjzf8GJLL4jC0VAIwMtsQklt
 EbiQX8JaHQS7RIql7MDg1N2vaTo+zxkf39Kkcl56usmO/uATP7cAPjFreF/xQ3d8
 OyBhz1cOXIhPw7bd9Dv9AgpJzA8WFpktDYEgy2sluBWMv+mLYjdZRCFkfpIRzmea
 pt+hJDeAy8ZL6/bjWCzz2x6wG7uJdDLblreI28sgnJx/VHR3Co6u4H1BqUBj18ct
 CHV6zQ55WFmx9/uJqBtwFy333HS2ysJziC5ucwmg8QjkvAn4RK8S0qHMfRvSSaHj
 F9ejnHGxyrc3zzfsngUf/VXIp67FReaavyKX3LYxjHjMPZDMw2xCtCWEpUs52l2o
 fAbkv8YFBbUalIv0RtELH5XnKQ2ggMP8UgvT74KyfXU6LaliH8lEV20FFjMgwrPI
 sMr2xk04eS8mNRNAXL8OMMwvh6DY/Qsmb7BVg58RIw6CdHeFJl834yztzcf7+j56
 4oUmA16QYBCFA3udGQ3Tb07mi8XTfrMdTOGA0koQG9tjswKXuLUXUk9WAXZe4vml
 ItRpZKE86BCs3mLJMYre
 =ZODv
 -----END PGP SIGNATURE-----

Merge tag 'pm+acpi-3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull ACPI and power management updates from Rafael Wysocki:
 "Again, ACPICA leads the pack (47 commits), followed by cpufreq (18
  commits) and system suspend/hibernation (9 commits).

  From the new code perspective, the ACPICA update brings ACPI 5.1 to
  the table, including a new device configuration object called _DSD
  (Device Specific Data) that will hopefully help us to operate device
  properties like Device Trees do (at least to some extent) and changes
  related to supporting ACPI on ARM.

  Apart from that we have hibernation changes making it use radix trees
  to store memory bitmaps which should speed up some operations carried
  out by it quite significantly.  We also have some power management
  changes related to suspend-to-idle (the "freeze" sleep state) support
  and more preliminary changes needed to support ACPI on ARM (outside of
  ACPICA).

  The rest is fixes and cleanups pretty much everywhere.

  Specifics:

   - ACPICA update to upstream version 20140724.  That includes ACPI 5.1
     material (support for the _CCA and _DSD predefined names, changes
     related to the DMAR and PCCT tables and ARM support among other
     things) and cleanups related to using ACPICA's header files.  A
     major part of it is related to acpidump and the core code used by
     that utility.  Changes from Bob Moore, David E Box, Lv Zheng,
     Sascha Wildner, Tomasz Nowicki, Hanjun Guo.

   - Radix trees for memory bitmaps used by the hibernation core from
     Joerg Roedel.

   - Support for waking up the system from suspend-to-idle (also known
     as the "freeze" sleep state) using ACPI-based PCI wakeup signaling
     (Rafael J Wysocki).

   - Fixes for issues related to ACPI button events (Rafael J Wysocki).

   - New device ID for an ACPI-enumerated device included into the
     Wildcat Point PCH from Jie Yang.

   - ACPI video updates related to backlight handling from Hans de Goede
     and Linus Torvalds.

   - Preliminary changes needed to support ACPI on ARM from Hanjun Guo
     and Graeme Gregory.

   - ACPI PNP core cleanups from Arjun Sreedharan and Zhang Rui.

   - Cleanups related to ACPI_COMPANION() and ACPI_HANDLE() macros
     (Rafael J Wysocki).

   - ACPI-based device hotplug cleanups from Wei Yongjun and Rafael J
     Wysocki.

   - Cleanups and improvements related to system suspend from Lan
     Tianyu, Randy Dunlap and Rafael J Wysocki.

   - ACPI battery cleanup from Wei Yongjun.

   - cpufreq core fixes from Viresh Kumar.

   - Elimination of a deadband effect from the cpufreq ondemand governor
     and intel_pstate driver cleanups from Stratos Karafotis.

   - 350MHz CPU support for the powernow-k6 cpufreq driver from Mikulas
     Patocka.

   - Fix for the imx6 cpufreq driver from Anson Huang.

   - cpuidle core and governor cleanups from Daniel Lezcano, Sandeep
     Tripathy and Mohammad Merajul Islam Molla.

   - Build fix for the big_little cpuidle driver from Sachin Kamat.

   - Configuration fix for the Operation Performance Points (OPP)
     framework from Mark Brown.

   - APM cleanup from Jean Delvare.

   - cpupower utility fixes and cleanups from Peter Senna Tschudin,
     Andrey Utkin, Himangi Saraogi, Rickard Strandqvist, Thomas
     Renninger"

* tag 'pm+acpi-3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (118 commits)
  ACPI / LPSS: add LPSS device for Wildcat Point PCH
  ACPI / PNP: Replace faulty is_hex_digit() by isxdigit()
  ACPICA: Update version to 20140724.
  ACPICA: ACPI 5.1: Update for PCCT table changes.
  ACPICA/ARM: ACPI 5.1: Update for GTDT table changes.
  ACPICA/ARM: ACPI 5.1: Update for MADT changes.
  ACPICA/ARM: ACPI 5.1: Update for FADT changes.
  ACPICA: ACPI 5.1: Support for the _CCA predifined name.
  ACPICA: ACPI 5.1: New notify value for System Affinity Update.
  ACPICA: ACPI 5.1: Support for the _DSD predefined name.
  ACPICA: Debug object: Add current value of Timer() to debug line prefix.
  ACPICA: acpihelp: Add UUID support, restructure some existing files.
  ACPICA: Utilities: Fix local printf issue.
  ACPICA: Tables: Update for DMAR table changes.
  ACPICA: Remove some extraneous printf arguments.
  ACPICA: Update for comments/formatting. No functional changes.
  ACPICA: Disassembler: Add support for the ToUUID opererator (macro).
  ACPICA: Remove a redundant cast to acpi_size for ACPI_OFFSET() macro.
  ACPICA: Work around an ancient GCC bug.
  ACPI / processor: Make it possible to get local x2apic id via _MAT
  ...
2014-08-06 20:34:19 -07:00
Arnd Bergmann ec4c4d877b video: fix up versatile CLCD helper move
commit 11c32d7b62 ("video: move Versatile CLCD helpers")
moved files out of the plat-versatile directory but in the process
got a few of the dependencies wrong:

- If CONFIG_FB is not set, the file no longer gets built, resulting
  in a link error
- If CONFIG_FB or CONFIG_FB_ARMCLCD are disabled, we also get a
  Kconfig warning for incorrect dependencies due to the symbol
  being 'select'ed from the platform Kconfig.
- When the file is not built, we also get a link error for missing
  symbols.

This patch should fix all three, by removing the 'select' statements,
changing the Kconfig description of the symbol to be enabled in
exactly the right configurations, and adding inline stub functions
for the case when the framebuffer driver is disabled.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-23 17:41:00 +02:00
Mark Brown 78c5e0bb14 PM / OPP: Remove ARCH_HAS_OPP
Since the OPP layer is a kernel library which has been converted to be
directly selectable by its callers rather than user selectable and
requiring architectures to enable it explicitly the ARCH_HAS_OPP symbol
has become redundant and can be removed. Do so.

Signed-off-by: Mark Brown <broonie@linaro.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Nishanth Menon <nm@ti.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Shawn Guo <shawn.guo@freescale.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-07-23 00:51:30 +02:00
Russell King af040ffc9b ARM: make it easier to check the CPU part number correctly
Ensure that platform maintainers check the CPU part number in the right
manner: the CPU part number is meaningless without also checking the
CPU implement(e|o)r (choose your preferred spelling!)  Provide an
interface which returns both the implementer and part number together,
and update the definitions to include the implementer.

Mark the old function as being deprecated... indeed, using the old
function with the definitions will now always evaluate as false, so
people must update their un-merged code to the new function.  While
this could be avoided by adding new definitions, we'd also have to
create new names for them which would be awkward.

Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-07-18 12:29:02 +01:00
Nicolas Pitre 3592d7e002 ARM: 8082/1: TC2: test the MCPM loopback during boot
This is not strictly needed on TC2 but still a good idea to exercise
that code.

Signed-off-by: nicolas Pitre <nico@linaro.org>
Reviewed-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-07-18 11:58:02 +01:00
Olof Johansson 5db3f62007 First pull request of Versatile family clean-ups for v3.17:
- Remove <mach/memory.h> from the Integrator, paving the
   road for multiplatform.
 - Push the CLCD helper code down into the framebuffer subsystem,
   removing the last hook in plat-versatile for the Integrator,
   also paving the road for multiplatform.
 
 Patches tested on Integrator/AP, Integrator/CP and Versatile AB
 (all real hardware).
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJTrSikAAoJEEEQszewGV1zh9oP+QHoI4WOUhHJMPNBa5ZpUXdZ
 KnbNHQrBvmSoMfVjQyiJnNz8AJGzlabIA/usMXw0q2QHB3SKx28zOVwhsI2mh1sk
 mVWIyr5ZQa4O5yRwyJtQKbwGRjEi8wQMHYJRMhJLioDgMAWaYC1t/fFNKH/JH+mi
 JoE/CD+/DBl1lw8px4udL4lisDMSguYOLRoq4GhHPfOEbnMOV4trV2dT7Wn6z3V9
 TcLj9r30rBZcf/GD3+vOzMsUxJtUNU+u/sqfFBbetqrZut5K4PrM4Ybc7xBwJEFr
 55/szveJS4pb+rSZWaCGanSizDTV9P4rjvWsBqVFw2xe1b+HElXZGUmsD0CXsNe4
 64LRTlY5smISgkeQhGqfYyZ4c0n221ceSRsKEV526N7MHKH4wc065wkv+edwps5C
 Yh/kvzo4zgt4pZPP2RNNZm4Rt5aI40W4GYtuV6NzJs2rNrAXDzVibmSRrgkh1j5M
 nbtl3Ygxbwt5VwMGg56AqvPj8tOUrolNBC12b6Pumakpvlr/br918GtOKvrSqKaT
 FSXTHnkYNcn5vwChXMc6kqXfl/rh/eKDYlevkrSPDgiKergqJBZMQjoSOTVxgAox
 q+zbOK88qHJOFdXuulcAaPFoRWLmjJ+90sg3uq/nCOD0ZrRyvn/lVIxlPZDcnbcC
 Bc6/qzYhqE3/ulMMBO9n
 =7Tuj
 -----END PGP SIGNATURE-----

Merge tag 'versatile-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into next/cleanup

Merge "First pull request of Versatile family clean-ups for v3.17" from Linus
Walleij:

- Remove <mach/memory.h> from the Integrator, paving the
  road for multiplatform.
- Push the CLCD helper code down into the framebuffer subsystem,
  removing the last hook in plat-versatile for the Integrator,
  also paving the road for multiplatform.

Patches tested on Integrator/AP, Integrator/CP and Versatile AB
(all real hardware).

* tag 'versatile-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator:
  video: move Versatile CLCD helpers
  ARM: integrator: get rid of <mach/memory.h>

Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-07 22:10:59 -07:00
Linus Walleij 11c32d7b62 video: move Versatile CLCD helpers
This moves the Versatile-specific helper code and panel database
down into the drivers/video folder next to the CLCD driver
itself, preserving the config symbol but also moving the header
to platform data.

This is necessary to rid the Integrator of this final <plat/*>
inclusion dependency and get us one less user of the
plat-versatile folder.

Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: linux-fbdev@vger.kernel.org
Cc: Russell King <linux@arm.linux.org.uk>
Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-06-27 10:15:22 +02:00
Linus Torvalds b4b664bef4 Merge branch 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm
Pull ARM fixes from Russell King:
 "A number of low impact fixes, the most noticable one is the thumb2
  frame pointer fix.  We also fix a regression caused during this merge
  window with ARM925 CPUs running with caches disabled, and fix a number
  of warnings"

* 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
  ARM: arm925: ensure assembly sets up writethrough mapping
  ARM: perf: fix compiler warning with gcc 4.6.4 (and tidy code)
  ARM: l2c: fix dependencies on PL310 errata symbols
  ARM: 8069/1: Make thread_save_fp macro aware of THUMB2 mode
  ARM: 8068/1: scoop: Remove unused variable
2014-06-24 13:59:00 -07:00
Russell King a641f3a6ab ARM: l2c: fix dependencies on PL310 errata symbols
A number of configurations spit out warnings similar to:

warning: (SOC_IMX6 && SOC_VF610 && ARCH_OMAP4) selects PL310_ERRATA_588369 which has unmet direct dependencies (CACHE_L2X0)
warning: (SOC_IMX6 && SOC_VF610 && ARCH_OMAP4) selects PL310_ERRATA_727915 which has unmet direct dependencies (CACHE_L2X0)

Clean up the dependencies here:
* PL310 symbols should only be selected when CACHE_L2X0 is enabled.
* Since the cache-l2x0 code detects PL310 presence at runtime, and we will
  eventually get rid of CACHE_PL310, surround these errata options with an
  if CACHE_L2X0 conditional rather than repeating the dependency against
  each.

Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-06-19 11:29:28 +01:00
Rob Herring 21278aeafb ARM: use menuconfig for sub-arch menus
The System Type menu is getting quite long with platforms and is
inconsistent in handling of sub-arch specific options. Tidy up the menu
by making platform options a menuconfig entry containing any platform
specific config items.

[arnd: change OMAP part according to suggestion from
 Tony Lindgren <tony@atomide.com>]

Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-06-17 17:09:48 +02:00
Stephen Boyd 19682f72f5 ARM: Remove ARCH_HAS_CPUFREQ config option
This config exists entirely to hide the cpufreq menu from the
kernel configuration unless a platform has selected it. Nothing
is actually built if this config is 'Y' and it just leads to more
patches that add a select under a platform Kconfig so that some
other CPUfreq option can be chosen. Let's remove the option so
that we can always enable CPUfreq drivers on ARM platforms.

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-06-17 17:09:39 +02:00
Linus Torvalds eb3d3ec567 Merge branch 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm into next
Pull ARM updates from Russell King:

 - Major clean-up of the L2 cache support code.  The existing mess was
   becoming rather unmaintainable through all the additions that others
   have done over time.  This turns it into a much nicer structure, and
   implements a few performance improvements as well.

 - Clean up some of the CP15 control register tweaks for alignment
   support, moving some code and data into alignment.c

 - DMA properties for ARM, from Santosh and reviewed by DT people.  This
   adds DT properties to specify bus translations we can't discover
   automatically, and to indicate whether devices are coherent.

 - Hibernation support for ARM

 - Make ftrace work with read-only text in modules

 - add suspend support for PJ4B CPUs

 - rework interrupt masking for undefined instruction handling, which
   allows us to enable interrupts earlier in the handling of these
   exceptions.

 - support for big endian page tables

 - fix stacktrace support to exclude stacktrace functions from the
   trace, and add save_stack_trace_regs() implementation so that kprobes
   can record stack traces.

 - Add support for the Cortex-A17 CPU.

 - Remove last vestiges of ARM710 support.

 - Removal of ARM "meminfo" structure, finally converting us solely to
   memblock to handle the early memory initialisation.

* 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: (142 commits)
  ARM: ensure C page table setup code follows assembly code (part II)
  ARM: ensure C page table setup code follows assembly code
  ARM: consolidate last remaining open-coded alignment trap enable
  ARM: remove global cr_no_alignment
  ARM: remove CPU_CP15 conditional from alignment.c
  ARM: remove unused adjust_cr() function
  ARM: move "noalign" command line option to alignment.c
  ARM: provide common method to clear bits in CPU control register
  ARM: 8025/1: Get rid of meminfo
  ARM: 8060/1: mm: allow sub-architectures to override PCI I/O memory type
  ARM: 8066/1: correction for ARM patch 8031/2
  ARM: 8049/1: ftrace/add save_stack_trace_regs() implementation
  ARM: 8065/1: remove last use of CONFIG_CPU_ARM710
  ARM: 8062/1: Modify ldrt fixup handler to re-execute the userspace instruction
  ARM: 8047/1: rwsem: use asm-generic rwsem implementation
  ARM: l2c: trial at enabling some Cortex-A9 optimisations
  ARM: l2c: add warnings for stuff modifying aux_ctrl register values
  ARM: l2c: print a warning with L2C-310 caches if the cache size is modified
  ARM: l2c: remove old .set_debug method
  ARM: l2c: kill L2X0_AUX_CTRL_MASK before anyone else makes use of this
  ...
2014-06-05 15:57:04 -07:00
Russell King 1fb333489f Merge branches 'alignment', 'fixes', 'l2c' (early part) and 'misc' into for-next 2014-06-05 12:35:52 +01:00
Linus Torvalds 82e627eb5e Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into next
Pull timer core updates from Thomas Gleixner:
 "This time you get nothing really exciting:
   - A huge update to the sh* clocksource drivers
   - Support for two more ARM SoCs
   - Removal of the deprecated setup_sched_clock() API
   - The usual pile of fixlets all over the place"

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
  clocksource: Add Freescale FlexTimer Module (FTM) timer support
  ARM: dts: vf610: Add Freescale FlexTimer Module timer node.
  clocksource: ftm: Add FlexTimer Module (FTM) Timer devicetree Documentation
  clocksource: sh_tmu: Remove unnecessary OOM messages
  clocksource: sh_mtu2: Remove unnecessary OOM messages
  clocksource: sh_cmt: Remove unnecessary OOM messages
  clocksource: em_sti: Remove unnecessary OOM messages
  clocksource: dw_apb_timer_of: Do not trace read_sched_clock
  clocksource: Fix clocksource_mmio_readX_down
  clocksource: Fix type confusion for clocksource_mmio_readX_Y
  clocksource: sh_tmu: Fix channel IRQ retrieval in legacy case
  clocksource: qcom: Implement read_current_timer for udelay
  ntp: Make is_error_status() use its argument
  ntp: Convert simple_strtol to kstrtol
  timer_stats/doc: Fix /proc/timer_stats documentation
  sched_clock: Remove deprecated setup_sched_clock() API
  ARM: sun6i: a31: Add support for the High Speed Timers
  clocksource: sun5i: Add support for reset controller
  clocksource: efm32: use $vendor,$device scheme for compatible string
  KConfig: Vexpress: build the ARM_GLOBAL_TIMER with vexpress platform
  ...
2014-06-04 15:57:20 -07:00
Russell King b28dd4ac66 ARM: l2c: vexpress: convert to generic l2c OF initialisation
Remove the explicit call to l2x0_of_init(), converting to the generic
infrastructure instead.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-05-30 00:50:25 +01:00
Russell King 060bf2af12 ARM: l2c: vexpress ca9x4: move L2 cache initialisation earlier
It is beneficial to have the L2 cache up and running earlier in the
system boot.  Not only will this allow for simpler code when we come to
enable some features, but it also means that we get a more accurate
bogomips value for the udelay() loop.  Calibrating the loop with the
L2 cache off, and then running with the L2 cache on is not the best
idea.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-05-30 00:50:24 +01:00
Russell King 1a5a954ce0 ARM: l2c: fix register naming
We have a mixture of different devices with different register layouts,
but we group all the bits together in an opaque mess.  Split them out
into those which are L2C-310 specific and ones which refer to earlier
devices.  Provide full auxiliary control register definitions.

Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-05-30 00:48:43 +01:00
Arnd Bergmann b33cdd283b ARM: vexpress: refine dependencies for new code
The versatile express changes for 3.16 introduced a number of
build regressions for randconfig kernels by not tracking dependencies
between the components right.

This patch tries to rectify that:

* the mach-vexpress code cannot link without the syscfg driver,
  which in turn needs MFD_VEXPRESS_SYSREG
* various drivers call devm_regmap_init_vexpress_config(), which
  has to be exported so it can be used by loadable modules
* the configuration bus uses OF DT helper functions that are not
  available to platforms disable CONFIG_OF
* The sysreg driver exports GPIOs through gpiolib, which can
  be disabled on some platforms.
* The clocksource code cannot be built on platforms that don't
  use modern timekeeping but rely on gettimeoffset.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-05-26 21:26:52 +02:00
Dave Martin 166aaf3966 ARM: 8029/1: mcpm: Rename the power_down_finish() functions to be less confusing
The name "power_down_finish" seems to be causing some confusion,
because it suggests that this function is responsible for taking
some action to cause the specified CPU to complete its power down.

This patch renames the affected functions to "wait_for_powerdown"
and similar, since this function's intended purpose is just to wait
for the hardware to finish a powerdown initiated by a previous
cpu_power_down.

Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-05-25 23:48:12 +01:00
Daniel Lezcano 3f04e3d3eb Merge remote-tracking branch 'tip/timers/core/timers/core' into clockevents/3.16 2014-05-16 16:08:32 +02:00
Pawel Moll 6b2c31c71d ARM: vexpress: move HBI check to sysreg driver
The last reason for static memory mapping is the HBI (board
identification number) check early in the machine code.

Moving the check to the sysreg driver makes it possible to
completely remove the early mapping and init functions.

Signed-off-by: Pawel Moll <pawel.moll@arm.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
2014-05-15 17:02:21 +01:00
Pawel Moll d2606f81d5 ARM: vexpress: Simplify SMP operations for DT-powered system
As all cores must be properly described in the Device Tree,
there is no point in getting their numbers from SCU on
A5/A9 platforms. This significantly simplifies the code,
removing the need for flat-tree scanning and early static
mapping.

Signed-off-by: Pawel Moll <pawel.moll@arm.com>
2014-05-15 17:02:21 +01:00
Sudeep KarkadaNagesha dcdea6295d ARM: vexpress: remove redundant vexpress_dt_cpus_num to get cpu count
arm_dt_init_cpu_maps parses the device tree, validates and sets the
cpu_possible_mask appropriately. It is unnecessary to do another DT
parse to get the number of cpus, use num_possible_cpus instead.

This patch also removes setting cpu_present_mask as platforms should
only re-initialize it in smp_prepare_cpus() if present != possible.

Signed-off-by: Sudeep KarkadaNagesha <sudeep.karkadanagesha@arm.com>
Signed-off-by: Pawel Moll <pawel.moll@arm.com>
2014-05-15 17:02:21 +01:00
Pawel Moll 220e2a8d22 clocksource: Sched clock source for Versatile Express
This patch adds a trival sched clock source using free
running, 24MHz clocked counter present in the ARM Ltd.
reference platforms (Versatile, RealView, Versatile
Express) System Registers block.

This code replaces the call in the VE machine code.

Signed-off-by: Pawel Moll <pawel.moll@arm.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2014-05-15 17:02:20 +01:00
Pawel Moll 974cc7b934 mfd: vexpress: Define the device as MFD cells
This patch - finally, after over 6 months! :-( - addresses
Samuel's request to split the vexpress-sysreg driver into
smaller portions and define the device in a form of MFD
cells:

* LEDs code has been completely removed and replaced with
  "gpio-leds" nodes in the tree (referencing dedicated
  GPIO subnodes in sysreg - bindings documentation updated);
  this also better fits the reality as some variants of the
  motherboard don't have all the LEDs populated

* syscfg bridge code has been extracted into a separate
  driver (placed in drivers/misc for no better place)

* all the ID & MISC registers are defined as sysconf
  making them available for other drivers should they need
  to use them (and also to the user via /sys/kernel/debug/regmap
  which can be helpful in platform debugging)

Signed-off-by: Pawel Moll <pawel.moll@arm.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
2014-05-15 17:02:19 +01:00
Pawel Moll 3b9334ac83 mfd: vexpress: Convert custom func API to regmap
Components of the Versatile Express platform (configuration
microcontrollers on motherboard and daughterboards in particular)
talk to each other over a custom configuration bus. They
provide miscellaneous functions (from clock generator control
to energy sensors) which are represented as platform devices
(and Device Tree nodes). The transactions on the bus can
be generated by different "bridges" in the system, some
of which are universal for the whole platform (for the price
of high transfer latencies), others restricted to a subsystem
(but much faster).

Until now drivers for such functions were using custom "func"
API, which is being replaced in this patch by regmap calls.
This required:

* a rework (and move to drivers/bus directory, as suggested
  by Samuel and Arnd) of the config bus core, which is much
  simpler now and uses device model infrastructure (class)
  to keep track of the bridges; non-DT case (soon to be
  retired anyway) is simply covered by a special device
  registration function

* the new config-bus driver also takes over device population,
  so there is no need for special matching table for
  of_platform_populate nor "simple-bus" hack in the arm64
  model dtsi file (relevant bindings documentation has
  been updated); this allows all the vexpress devices
  fit into normal device model, making it possible
  to remove plenty of early inits and other hacks in
  the near future

* adaptation of the syscfg bridge implementation in the
  sysreg driver, again making it much simpler; there is
  a special case of the "energy" function spanning two
  registers, where they should be both defined in the tree
  now, but backward compatibility is maintained in the code

* modification of the relevant drivers:

  * hwmon - just a straight-forward API change
  * power/reset driver - API change
  * regulator - API change plus error handling
    simplification
  * osc clock driver - this one required larger rework
    in order to turn in into a standard platform driver

Signed-off-by: Pawel Moll <pawel.moll@arm.com>
Acked-by: Mark Brown <broonie@linaro.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Mike Turquette <mturquette@linaro.org>
2014-05-15 17:02:18 +01:00
Punit Agrawal cf2e0a73ca ARM: vexpress/TC2: Convert OPP voltage to uV before storing
The SPC stores voltage in mV while the code assumes it was returning
uV. Convert the returned voltage to uV before storing. Also fix the
comment depicting voltage to uV.

Signed-off-by: Punit Agrawal <punit.agrawal@arm.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Pawel Moll <pawel.moll@arm.com>
2014-04-24 17:20:50 +01:00
Heinrich Schuchardt bb6dd5757c arm/mach-vexpress: array accessed out of bounds
dcscb_allcpus_mask is an array of size 2.

The index variable cluster has to be checked against this limit
before accessing the array.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Pawel Moll <pawel.moll@arm.com>
2014-04-24 11:41:12 +01:00
Matthew Leach 7e13c654f4 KConfig: Vexpress: build the ARM_GLOBAL_TIMER with vexpress platform
The Cortex A5 now contains bindings for the global timer
driver. Ensure that the driver is built with a vexpress platform.

Signed-off-by: Matthew Leach <matthew.leach@arm.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2014-04-22 11:44:27 +02:00
Linus Torvalds ede1d63fcc Merge branch 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm
Pull second set of ARM changes from Russell King:
 "This is the remainder of the ARM changes for this merge window.
  Included in this request are:

   - fixes for kprobes for big-endian support
   - fix tracing in soft_restart
   - avoid phys address overflow in kdump code
   - fix reporting of read-only pmd bits in kernel page table dump
   - remove unnecessary (and possibly buggy) call to outer_flush_all()
   - fix a three sparse warnings (missing header file for function
     prototypes)
   - fix pj4 crashing single zImage (thanks to arm-soc merging changes
     which enables this with knowledge that the corresponding fix had
     not even been submitted for my tree before the merge window opened)
   - vfp macro cleanups
   - dump register state on undefined instruction userspace faults when
     debugging"

* 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
  Dump the registers on undefined instruction userspace faults
  ARM: 8018/1: Add {inc,dec}_preempt_count asm macros
  ARM: 8017/1: Move asm macro get_thread_info to asm/assembler.h
  ARM: 8016/1: Check cpu id in pj4_cp0_init.
  ARM: 8015/1: Add cpu_is_pj4 to distinguish PJ4 because it has some differences with V7
  ARM: add missing system_misc.h include to process.c
  ARM: 8009/1: dcscb.c: remove call to outer_flush_all()
  ARM: 8014/1: mm: fix reporting of read-only PMD bits
  ARM: 8012/1: kdump: Avoid overflow when converting pfn to physaddr
  ARM: 8010/1: avoid tracers in soft_restart
  ARM: kprobes-test: Workaround GAS .align bug
  ARM: kprobes-test: use <asm/opcodes.h> for Thumb instruction building
  ARM: kprobes-test: use <asm/opcodes.h> for ARM instruction building
  ARM: kprobes-test: use <asm/opcodes.h> for instruction accesses
  ARM: probes: fix instruction fetch order with <asm/opcodes.h>
2014-04-11 11:56:40 -07:00
Russell King 53f1d9afb4 Merge branches 'fixes' and 'misc' into for-next 2014-04-11 14:50:05 +01:00
Uwe Kleine-König ce816fa88c Kconfig: rename HAS_IOPORT to HAS_IOPORT_MAP
If the renamed symbol is defined lib/iomap.c implements ioport_map and
ioport_unmap and currently (nearly) all platforms define the port
accessor functions outb/inb and friend unconditionally.  So
HAS_IOPORT_MAP is the better name for this.

Consequently NO_IOPORT is renamed to NO_IOPORT_MAP.

The motivation for this change is to reintroduce a symbol HAS_IOPORT
that signals if outb/int et al are available.  I will address that at
least one merge window later though to keep surprises to a minimum and
catch new introductions of (HAS|NO)_IOPORT.

The changes in this commit were done using:

	$ git grep -l -E '(NO|HAS)_IOPORT' | xargs perl -p -i -e 's/\b((?:CONFIG_)?(?:NO|HAS)_IOPORT)\b/$1_MAP/'

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07 16:36:11 -07:00
Nicolas Pitre c9d347e027 ARM: 8009/1: dcscb.c: remove call to outer_flush_all()
Strictly speaking this call is a no-op on the platform where dcscb.c is
used since it only has architected caches.  The call was there as a hint
to people inspired by this code when writing their own backend, but the
hint might not always be correct.

For example, if a PL310 were to be used it wouldn't be safe to call
the regular outer_flush_all() as atomic instructions for locking
are involved in that case and those instructions cannot be assumed to
still be operational after v7_exit_coherency_flush() has returned.
Given no other CPUs (in the cluster) should be running at that point
then standard concurrency concerns wouldn't apply.

So let's simply kill this call for now and enhance the existing comment.

Signed-off-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-04-07 15:27:05 +01:00
Linus Torvalds dfc25e4503 ARM: SoC: cleanups for 3.15
These cleanup patches are mainly move stuff around and should all
 be harmless. They are mainly split out so that other branches can
 be based on top to avoid conflicts.
 
 Notable changes are:
 
 * We finally remove all mach/timex.h, after CLOCK_TICK_RATE is no
   longer used. (Uwe Kleine-König)
 * The Qualcomm MSM platform is split out into legacy mach-msm and
   new-style mach-qcom, to allow easier maintainance of the new
   hardware support without regressions. (Kumar Gala)
 * A rework of some of the Kconfig logic to simplify multiplatform
   support (Rob Herring)
 * Samsung Exynos gets closer to supporting multiplatform (Sachin
   Kamat and others)
 * mach-bcm3528 gets merged into mach-bcm (Stephen Warren)
 * at91 gains some common clock framework support (Alexandre Belloni,
   Jean-Jacques Hiblot and other French people).
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIVAwUAUz/yOWCrR//JCVInAQLOPBAAwTMkMrD8S8ggz6vfiQHZNdRPAC7NUJ46
 +eYKmBVi5d6EdnjNuRElWENsh0ZosSAUFHrXsIC2NdH9sAJ9HOqWNNLymuA59Jo9
 HZ/Ze6xQXDPNV7TROPoXuIli/2OCOXyyQHJsfI7h9V3PCx31qo0B5OdCxU0mtXK6
 r1giREhnJFwfQMF/FTdnzhalFJoSjWwv/nkpNmQDJKRLKj9GzwQqItqw68gV6RzU
 Gnt6YK+9xC1B0cfWTFhAm6kbr9i7mvHoMG5tE3no2uuJMn4K7TgeMqOyvPWhmUeB
 EZi656szT1m5VfRWOqG+7coZO2VM4GO4NI0Xfin3GHllugOYls1il/FAfCPMLiwh
 RvuOmQGCkLIpdkuHop5QaI/h1EzlHA59nzTjmGf1+wWPsm0CIg08XOD9izQbRnN9
 EmRqn1/8POIi17xcWyeMp8LB0APsTI+IflZFaYprEY9VlLLA/Pd+7udULhs8Bq8y
 1l6fB6aPZKnDKCBy/PEIR+y+EHFEbwfrx6zm/pxVDX6P5DlQMFWL78pdBoJUa2h8
 3pm/bSzNU5OSz1nJMLJv2jBTtnM5BvFgQBUi2qJ9Lr+nUhJXKCJ80kE/nOlXoCIU
 J952p3OhkYTQQcjuUVQeTXvRUOGB7mKok0pDFZNE6c7faqxTCudMABQq/KbMFstU
 eE3cH5FyYj4=
 =GcBb
 -----END PGP SIGNATURE-----

Merge tag 'cleanup-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC cleanups from Arnd Bergmann:
 "These cleanup patches are mainly move stuff around and should all be
  harmless.  They are mainly split out so that other branches can be
  based on top to avoid conflicts.

  Notable changes are:

   - We finally remove all mach/timex.h, after CLOCK_TICK_RATE is no
     longer used (Uwe Kleine-König)
   - The Qualcomm MSM platform is split out into legacy mach-msm and
     new-style mach-qcom, to allow easier maintainance of the new
     hardware support without regressions (Kumar Gala)
   - A rework of some of the Kconfig logic to simplify multiplatform
     support (Rob Herring)
   - Samsung Exynos gets closer to supporting multiplatform (Sachin
     Kamat and others)
   - mach-bcm3528 gets merged into mach-bcm (Stephen Warren)
   - at91 gains some common clock framework support (Alexandre Belloni,
     Jean-Jacques Hiblot and other French people)"

* tag 'cleanup-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (89 commits)
  ARM: hisi: select HAVE_ARM_SCU only for SMP
  ARM: efm32: allow uncompress debug output
  ARM: prima2: build reset code standalone
  ARM: at91: add PWM clock
  ARM: at91: move sam9261 SoC to common clk
  ARM: at91: prepare common clk transition for sam9261 SoC
  ARM: at91: updated the at91_dt_defconfig with support for the ADS7846
  ARM: at91: dt: sam9261: Device Tree support for the at91sam9261ek
  ARM: at91: dt: defconfig: Added the sam9261 to the list of DT-enabled SOCs
  ARM: at91: dt: Add at91sam9261 dt SoC support
  ARM: at91: switch sam9rl to common clock framework
  ARM: at91/dt: define main clk frequency of at91sam9rlek
  ARM: at91/dt: define at91sam9rl clocks
  ARM: at91: prepare common clk transition for sam9rl SoCs
  ARM: at91: prepare sam9 dt boards transition to common clk
  ARM: at91: dt: sam9rl: Device Tree for the at91sam9rlek
  ARM: at91/defconfig: Add the sam9rl to the list of DT-enabled SOCs
  ARM: at91: Add at91sam9rl DT SoC support
  ARM: at91: prepare at91sam9rl DT transition
  ARM: at91/defconfig: refresh at91sam9260_9g20_defconfig
  ...
2014-04-05 13:51:19 -07:00
Rob Herring 9352b05b6e ARM: select MIGHT_HAVE_CACHE_L2X0 for V6 and V7 multi-platform
Many V6 and V7 platforms have an L2x0 cache, so make
CONFIG_MIGHT_HAVE_CACHE_L2X0 visible for V6 and V7 multi-platform
builds.

Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
2014-02-19 16:44:00 -06:00
Rob Herring 90bc8ac77d ARM: select HAVE_SMP for V7 multi-platform
All V7 platforms can run SMP kernels, so make CONFIG_SMP visible for V7
multi-platform builds.

Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
2014-02-19 16:43:27 -06:00
Rob Herring ddb902cc34 ARM: centralize common multi-platform kconfig options
Multi-platform requires various kconfig options to be selected, so
platforms don't need to select them individually.

Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Russell King <linux@arm.linux.org.uk>
Acked-by: Stephen Warren <swarren@nvidia.com>
Tested-by: Stephen Warren <swarren@wwwdotorg.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
2014-02-19 16:38:18 -06:00
Dave Martin ea36d2ab1a ARM: 7962/2: Make all mcpm functions notrace
The functions in mcpm_entry.c are mostly intended for use during
scary cache and coherency disabling sequences, or do other things
which confuse trace ... like powering a CPU down and not
returning. Similarly for the backend code.

For simplicity, this patch just makes whole files notrace.
There should be more than enough traceable points on the paths to
these functions, but we can be more fine-grained later if there is
a need for it.

Jon Medhurst:
Also added spc.o to the list of files as it contains functions used by
MCPM code which have comments comments like: "might be used in code
paths where normal cacheable locks are not working"

Signed-off-by: Dave Martin <dave.martin@linaro.org>
Signed-off-by: Jon Medhurst <tixy@linaro.org>
Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-02-18 19:39:33 +00:00
Dave Martin 33cb667a00 ARM: vexpress/TC2: Implement MCPM power_down_finish()
This patch implements the power_down_finish() method for TC2, to
enable the kernel to confirm when CPUs are safely powered down.

The information required for determining when a CPU is parked
cannot be obtained from any single place, so a few sources of
information must be combined:

  * mcpm_cpu_power_down() must be pending for the CPU, so that we
    don't get confused by false STANDBYWFI positives arising from
    CPUidle.  This is detected by waiting for the tc2_pm use count
    for the target CPU to reach 0.

  * Either the SPC must report that the CPU has asserted
    STANDBYWFI, or the TC2 tile's reset control logic must be
    holding the CPU in reset.

    Just checking for STANDBYWFI is not sufficient, because this
    signal is not latched when the the cluster is clamped off and
    powered down: the relevant status bits just drop to zero.  This
    means that STANDBYWFI status cannot be used for reliable
    detection of the last CPU in a cluster reaching WFI.

This patch is required in order for kexec to work with MCPM on TC2.

MCPM code was changed in commit 0de0d64675 ('ARM: 7848/1: mcpm:
Implement cpu_kill() to synchronise on powerdown'), and since then it
will hit a WARN_ON_ONCE() due to power_down_finish not being implemented
on the TC2 platform.

Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Acked-by: Pawel Moll <pawel.moll@arm.com>
Reviewed-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
2013-11-25 14:12:14 -08:00
Linus Torvalds f9300eaaac ACPI and power management updates for 3.13-rc1
- New power capping framework and the the Intel Running Average Power
    Limit (RAPL) driver using it from Srinivas Pandruvada and Jacob Pan.
 
  - Addition of the in-kernel switching feature to the arm_big_little
    cpufreq driver from Viresh Kumar and Nicolas Pitre.
 
  - cpufreq support for iMac G5 from Aaro Koskinen.
 
  - Baytrail processors support for intel_pstate from Dirk Brandewie.
 
  - cpufreq support for Midway/ECX-2000 from Mark Langsdorf.
 
  - ARM vexpress/TC2 cpufreq support from Sudeep KarkadaNagesha.
 
  - ACPI power management support for the I2C and SPI bus types from
    Mika Westerberg and Lv Zheng.
 
  - cpufreq core fixes and cleanups from Viresh Kumar, Srivatsa S Bhat,
    Stratos Karafotis, Xiaoguang Chen, Lan Tianyu.
 
  - cpufreq drivers updates (mostly fixes and cleanups) from Viresh Kumar,
    Aaro Koskinen, Jungseok Lee, Sudeep KarkadaNagesha, Lukasz Majewski,
    Manish Badarkhe, Hans-Christian Egtvedt, Evgeny Kapaev.
 
  - intel_pstate updates from Dirk Brandewie and Adrian Huang.
 
  - ACPICA update to version 20130927 includig fixes and cleanups and
    some reduction of divergences between the ACPICA code in the kernel
    and ACPICA upstream in order to improve the automatic ACPICA patch
    generation process.  From Bob Moore, Lv Zheng, Tomasz Nowicki,
    Naresh Bhat, Bjorn Helgaas, David E Box.
 
  - ACPI IPMI driver fixes and cleanups from Lv Zheng.
 
  - ACPI hotplug fixes and cleanups from Bjorn Helgaas, Toshi Kani,
    Zhang Yanfei, Rafael J Wysocki.
 
  - Conversion of the ACPI AC driver to the platform bus type and
    multiple driver fixes and cleanups related to ACPI from Zhang Rui.
 
  - ACPI processor driver fixes and cleanups from Hanjun Guo, Jiang Liu,
    Bartlomiej Zolnierkiewicz, Mathieu Rhéaume, Rafael J Wysocki.
 
  - Fixes and cleanups and new blacklist entries related to the ACPI
    video support from Aaron Lu, Felipe Contreras, Lennart Poettering,
    Kirill Tkhai.
 
  - cpuidle core cleanups from Viresh Kumar and Lorenzo Pieralisi.
 
  - cpuidle drivers fixes and cleanups from Daniel Lezcano, Jingoo Han,
    Bartlomiej Zolnierkiewicz, Prarit Bhargava.
 
  - devfreq updates from Sachin Kamat, Dan Carpenter, Manish Badarkhe.
 
  - Operation Performance Points (OPP) core updates from Nishanth Menon.
 
  - Runtime power management core fix from Rafael J Wysocki and update
    from Ulf Hansson.
 
  - Hibernation fixes from Aaron Lu and Rafael J Wysocki.
 
  - Device suspend/resume lockup detection mechanism from Benoit Goby.
 
  - Removal of unused proc directories created for various ACPI drivers
    from Lan Tianyu.
 
  - ACPI LPSS driver fix and new device IDs for the ACPI platform scan
    handler from Heikki Krogerus and Jarkko Nikula.
 
  - New ACPI _OSI blacklist entry for Toshiba NB100 from Levente Kurusa.
 
  - Assorted fixes and cleanups related to ACPI from Andy Shevchenko,
    Al Stone, Bartlomiej Zolnierkiewicz, Colin Ian King, Dan Carpenter,
    Felipe Contreras, Jianguo Wu, Lan Tianyu, Yinghai Lu, Mathias Krause,
    Liu Chuansheng.
 
  - Assorted PM fixes and cleanups from Andy Shevchenko, Thierry Reding,
    Jean-Christophe Plagniol-Villard.
 
 /
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iQIcBAABCAAGBQJSfPKLAAoJEILEb/54YlRxH6YQAJwDKi25RCZziFSIenXuqzC/
 c6JxoH/tSnDHJHhcTgqh7H7Raa+zmatMDf0m2oEv2Wjfx4Lt4BQK4iefhe/zY4lX
 yJ8uXDg+U8DYhDX2XwbwnFpd1M1k/A+s2gIHDTHHGnE0kDngXdd8RAFFktBmooTZ
 l5LBQvOrTlgX/ZfqI/MNmQ6lfY6kbCABGSHV1tUUsDA6Kkvk/LAUTOMSmptv1q22
 hcs6k55vR34qADPkUX5GghjmcYJv+gNtvbDEJUjcmCwVoPWouF415m7R5lJ8w3/M
 49Q8Tbu5HELWLwca64OorS8qh/P7sgUOf1BX5IDzHnJT+TGeDfvcYbMv2Z275/WZ
 /bqhuLuKBpsHQ2wvEeT+lYV3FlifKeTf1FBxER3ApjzI3GfpmVVQ+dpEu8e9hcTh
 ZTPGzziGtoIsHQ0unxb+zQOyt1PmIk+cU4IsKazs5U20zsVDMcKzPrb19Od49vMX
 gCHvRzNyOTqKWpE83Ss4NGOVPAG02AXiXi/BpuYBHKDy6fTH/liKiCw5xlCDEtmt
 lQrEbupKpc/dhCLo5ws6w7MZzjWJs2eSEQcNR4DlR++pxIpYOOeoPTXXrghgZt2X
 mmxZI2qsJ7GAvPzII8OBeF3CRO3fabZ6Nez+M+oEZjGe05ZtpB3ccw410HwieqBn
 dYpJFt/BHK189odhV9CM
 =JCxk
 -----END PGP SIGNATURE-----

Merge tag 'pm+acpi-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull ACPI and power management updates from Rafael J Wysocki:

 - New power capping framework and the the Intel Running Average Power
   Limit (RAPL) driver using it from Srinivas Pandruvada and Jacob Pan.

 - Addition of the in-kernel switching feature to the arm_big_little
   cpufreq driver from Viresh Kumar and Nicolas Pitre.

 - cpufreq support for iMac G5 from Aaro Koskinen.

 - Baytrail processors support for intel_pstate from Dirk Brandewie.

 - cpufreq support for Midway/ECX-2000 from Mark Langsdorf.

 - ARM vexpress/TC2 cpufreq support from Sudeep KarkadaNagesha.

 - ACPI power management support for the I2C and SPI bus types from Mika
   Westerberg and Lv Zheng.

 - cpufreq core fixes and cleanups from Viresh Kumar, Srivatsa S Bhat,
   Stratos Karafotis, Xiaoguang Chen, Lan Tianyu.

 - cpufreq drivers updates (mostly fixes and cleanups) from Viresh
   Kumar, Aaro Koskinen, Jungseok Lee, Sudeep KarkadaNagesha, Lukasz
   Majewski, Manish Badarkhe, Hans-Christian Egtvedt, Evgeny Kapaev.

 - intel_pstate updates from Dirk Brandewie and Adrian Huang.

 - ACPICA update to version 20130927 includig fixes and cleanups and
   some reduction of divergences between the ACPICA code in the kernel
   and ACPICA upstream in order to improve the automatic ACPICA patch
   generation process.  From Bob Moore, Lv Zheng, Tomasz Nowicki, Naresh
   Bhat, Bjorn Helgaas, David E Box.

 - ACPI IPMI driver fixes and cleanups from Lv Zheng.

 - ACPI hotplug fixes and cleanups from Bjorn Helgaas, Toshi Kani, Zhang
   Yanfei, Rafael J Wysocki.

 - Conversion of the ACPI AC driver to the platform bus type and
   multiple driver fixes and cleanups related to ACPI from Zhang Rui.

 - ACPI processor driver fixes and cleanups from Hanjun Guo, Jiang Liu,
   Bartlomiej Zolnierkiewicz, Mathieu Rhéaume, Rafael J Wysocki.

 - Fixes and cleanups and new blacklist entries related to the ACPI
   video support from Aaron Lu, Felipe Contreras, Lennart Poettering,
   Kirill Tkhai.

 - cpuidle core cleanups from Viresh Kumar and Lorenzo Pieralisi.

 - cpuidle drivers fixes and cleanups from Daniel Lezcano, Jingoo Han,
   Bartlomiej Zolnierkiewicz, Prarit Bhargava.

 - devfreq updates from Sachin Kamat, Dan Carpenter, Manish Badarkhe.

 - Operation Performance Points (OPP) core updates from Nishanth Menon.

 - Runtime power management core fix from Rafael J Wysocki and update
   from Ulf Hansson.

 - Hibernation fixes from Aaron Lu and Rafael J Wysocki.

 - Device suspend/resume lockup detection mechanism from Benoit Goby.

 - Removal of unused proc directories created for various ACPI drivers
   from Lan Tianyu.

 - ACPI LPSS driver fix and new device IDs for the ACPI platform scan
   handler from Heikki Krogerus and Jarkko Nikula.

 - New ACPI _OSI blacklist entry for Toshiba NB100 from Levente Kurusa.

 - Assorted fixes and cleanups related to ACPI from Andy Shevchenko, Al
   Stone, Bartlomiej Zolnierkiewicz, Colin Ian King, Dan Carpenter,
   Felipe Contreras, Jianguo Wu, Lan Tianyu, Yinghai Lu, Mathias Krause,
   Liu Chuansheng.

 - Assorted PM fixes and cleanups from Andy Shevchenko, Thierry Reding,
   Jean-Christophe Plagniol-Villard.

* tag 'pm+acpi-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (386 commits)
  cpufreq: conservative: fix requested_freq reduction issue
  ACPI / hotplug: Consolidate deferred execution of ACPI hotplug routines
  PM / runtime: Use pm_runtime_put_sync() in __device_release_driver()
  ACPI / event: remove unneeded NULL pointer check
  Revert "ACPI / video: Ignore BIOS initial backlight value for HP 250 G1"
  ACPI / video: Quirk initial backlight level 0
  ACPI / video: Fix initial level validity test
  intel_pstate: skip the driver if ACPI has power mgmt option
  PM / hibernate: Avoid overflow in hibernate_preallocate_memory()
  ACPI / hotplug: Do not execute "insert in progress" _OST
  ACPI / hotplug: Carry out PCI root eject directly
  ACPI / hotplug: Merge device hot-removal routines
  ACPI / hotplug: Make acpi_bus_hot_remove_device() internal
  ACPI / hotplug: Simplify device ejection routines
  ACPI / hotplug: Fix handle_root_bridge_removal()
  ACPI / hotplug: Refuse to hot-remove all objects with disabled hotplug
  ACPI / scan: Start matching drivers after trying scan handlers
  ACPI: Remove acpi_pci_slot_init() headers from internal.h
  ACPI / blacklist: fix name of ThinkPad Edge E530
  PowerCap: Fix build error with option -Werror=format-security
  ...

Conflicts:
	arch/arm/mach-omap2/opp.c
	drivers/Kconfig
	drivers/spi/spi.c
2013-11-14 13:41:48 +09:00
Linus Torvalds f47671e2d8 Merge branch 'for-linus' of git://git.linaro.org/people/rmk/linux-arm
Pull ARM updates from Russell King:
 "Included in this series are:

   1. BE8 (modern big endian) changes for ARM from Ben Dooks
   2. big.Little support from Nicolas Pitre and Dave Martin
   3. support for LPAE systems with all system memory above 4GB
   4. Perf updates from Will Deacon
   5. Additional prefetching and other performance improvements from Will.
   6. Neon-optimised AES implementation fro Ard.
   7. A number of smaller fixes scattered around the place.

  There is a rather horrid merge conflict in tools/perf - I was never
  notified of the conflict because it originally occurred between Will's
  tree and other stuff.  Consequently I have a resolution which Will
  forwarded me, which I'll forward on immediately after sending this
  mail.

  The other notable thing is I'm expecting some build breakage in the
  crypto stuff on ARM only with Ard's AES patches.  These were merged
  into a stable git branch which others had already pulled, so there's
  little I can do about this.  The problem is caused because these
  patches have a dependency on some code in the crypto git tree - I
  tried requesting a branch I can pull to resolve these, and all I got
  each time from the crypto people was "we'll revert our patches then"
  which would only make things worse since I still don't have the
  dependent patches.  I've no idea what's going on there or how to
  resolve that, and since I can't split these patches from the rest of
  this pull request, I'm rather stuck with pushing this as-is or
  reverting Ard's patches.

  Since it should "come out in the wash" I've left them in - the only
  build problems they seem to cause at the moment are with randconfigs,
  and since it's a new feature anyway.  However, if by -rc1 the
  dependencies aren't in, I think it'd be best to revert Ard's patches"

I resolved the perf conflict roughly as per the patch sent by Russell,
but there may be some differences.  Any errors are likely mine.  Let's
see how the crypto issues work out..

* 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: (110 commits)
  ARM: 7868/1: arm/arm64: remove atomic_clear_mask() in "include/asm/atomic.h"
  ARM: 7867/1: include: asm: use 'int' instead of 'unsigned long' for 'oldval' in atomic_cmpxchg().
  ARM: 7866/1: include: asm: use 'long long' instead of 'u64' within atomic.h
  ARM: 7871/1: amba: Extend number of IRQS
  ARM: 7887/1: Don't smp_cross_call() on UP devices in arch_irq_work_raise()
  ARM: 7872/1: Support arch_irq_work_raise() via self IPIs
  ARM: 7880/1: Clear the IT state independent of the Thumb-2 mode
  ARM: 7878/1: nommu: Implement dummy early_paging_init()
  ARM: 7876/1: clear Thumb-2 IT state on exception handling
  ARM: 7874/2: bL_switcher: Remove cpu_hotplug_driver_{lock,unlock}()
  ARM: footbridge: fix build warnings for netwinder
  ARM: 7873/1: vfp: clear vfp_current_hw_state for dying cpu
  ARM: fix misplaced arch_virt_to_idmap()
  ARM: 7848/1: mcpm: Implement cpu_kill() to synchronise on powerdown
  ARM: 7847/1: mcpm: Factor out logical-to-physical CPU translation
  ARM: 7869/1: remove unused XSCALE_PMU Kconfig param
  ARM: 7864/1: Handle 64-bit memory in case of 32-bit phys_addr_t
  ARM: 7863/1: Let arm_add_memory() always use 64-bit arguments
  ARM: 7862/1: pcpu: replace __get_cpu_var_uses
  ARM: 7861/1: cacheflush: consolidate single-CPU ARMv7 cache disabling code
  ...
2013-11-14 08:51:29 +09:00
Russell King df762eccba Merge branch 'devel-stable' into for-next
Conflicts:
	arch/arm/include/asm/atomic.h
	arch/arm/include/asm/hardirq.h
	arch/arm/kernel/smp.c
2013-11-12 10:58:59 +00:00
Sudeep KarkadaNagesha 9e941b6f42 ARM: vexpress/TC2: register vexpress-spc cpufreq device
This patch adds vexpress-spc platform device to enables the vexpress
SPC cpufreq interface driver.

Signed-off-by: Sudeep KarkadaNagesha <sudeep.karkadanagesha@arm.com>
Acked-by: Pawel Moll <Pawel.Moll@arm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-10-30 00:48:26 +01:00
Sudeep KarkadaNagesha 4d910d5bb5 ARM: vexpress/TC2: add cpu clock support
On TC2, the cpu clocks are controlled by the external M3 microcontroller
and SPC provides the interface between the CPU and the power controller.

The generic cpufreq drivers use the clock APIs to get the cpu clocks.
This patch add virtual spc clocks for all the cpus to control the cpu
operating frequency via the clock framework.

Signed-off-by: Sudeep KarkadaNagesha <sudeep.karkadanagesha@arm.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
Acked-by: Pawel Moll <Pawel.Moll@arm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-10-30 00:48:25 +01:00
Sudeep KarkadaNagesha f7cd2d835e ARM: vexpress/TC2: add support for CPU DVFS
SPC(Serial Power Controller) on TC2 also controls the CPU performance
operating points which is essential to provide CPU DVFS. The M3
microcontroller provides two sets of eight performance values, one set
for each cluster (CA15 or CA7). Each of this value contains the
frequency(kHz) and voltage(mV) at that performance level. It expects
these performance level to be passed through the SPC PERF_LVL registers.

This patch adds support to populate these performance levels from M3,
build the mapping to CPU OPPs at the boot and then use it to get and
set the CPU performance level runtime.

Signed-off-by: Sudeep KarkadaNagesha <sudeep.karkadanagesha@arm.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
Acked-by: Pawel Moll <Pawel.Moll@arm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-10-30 00:48:25 +01:00
Nicolas Pitre 39792c7cf3 ARM: 7861/1: cacheflush: consolidate single-CPU ARMv7 cache disabling code
This code is becoming duplicated in many places.  So let's consolidate
it into a handy macro that is known to be right and available for reuse.

Signed-off-by: Nicolas Pitre <nico@linaro.org>
Acked-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-10-29 11:06:23 +00:00