Commit Graph

369 Commits

Author SHA1 Message Date
Dmitry Artamonow 4995c0b367 mfd: Fix asic3 build
asic3 also needs tmio_core or otherwise will fail to build.

Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-01-29 21:03:09 +01:00
Alberto Panizzo 1e02b2c324 mfd: Unlock mc13783 before subsystems initialisation, at probe time.
With this, mc13783 subsystems drivers can configure the mc13783 chip
reading and writing registers.

Signed-off-by: Alberto Panizzo <maramaopercheseimorto@gmail.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-01-18 12:30:28 +01:00
Mark Brown 8e6ba2dfa2 mfd: WM835x GPIO direction register is not locked
No need to set the security key when writing to it.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@kernel.org
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-01-18 12:30:28 +01:00
Ian Molton 64e8867ba8 mfd: tmio_mmc hardware abstraction for CNF area
This patch abstracts out the CNF area code from tmio_mmc which
is not present in all hardware that can use this driver. This
is required so that we can support non-toshiba based hardware.

ASIC3 support by Philipp Zabel

Signed-off-by: Ian Molton <ian@mnementh.co.uk>
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-01-18 12:30:27 +01:00
Dan Carpenter 6f2af72a24 mfd: WM8350 off by one bug
If irq == WM8350_NUM_IRQ that would put us past the end of the array.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-01-18 12:30:26 +01:00
Linus Torvalds cd6e125c58 twl4030-irq.c: fix compiler warning due to raw-spinlock conversion
Commit 239007b844 ("genirq: Convert irq_desc.lock to raw_spinlock")
seems to have missed this driver, leaving it to use the normal spin-lock
functions for the irq descriptor lock, which is now a raw lock.

Reported-and-compile-tested-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-31 17:26:05 -08:00
Stephen Rothwell 8bea8672ed mfd: compile fix for twl4030 renaming
Caused by commit 0b83ddebc6 ("MFD:
twl4030: add twl4030_codec MFD as a new child to the core") interacting
with commit b07682b605 ("mfd: Rename
twl4030* driver files to enable re-use").

This file seems to have been missed in the renaming.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 09:33:36 -08:00
Linus Torvalds 48e902f0a3 Merge git://git.infradead.org/battery-2.6
* git://git.infradead.org/battery-2.6:
  power_supply_sysfs: Handle -ENODATA in a special way
  wm831x_backup: Remove unused variables
  gta02: Set pcf50633 charger_reference_current_ma
  pcf50633: Query charger status directly
  pcf50633: Properly reenable charging when the supply conditions change
  pcf50633: Get rid of charging restart software auto-triggering
  pcf50633: introduces battery charging current control
  pcf50633: Add ac power supply class to the charger
  wm831x: Factor out WM831x backup battery charger
2009-12-15 08:59:33 -08:00
Rajendra Nayak 9da6653928 mfd: Add twl6030 regulator subdevices
This patch adds initial support for creating twl6030 PMIC
specific voltage regulators in the twl mfd driver.

Board specific regulator configurations will have to be passed from
respective board files.

Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Signed-off-by: Balaji T K <balajitk@ti.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-14 00:26:26 +01:00
Balaji T K e8deb28ca8 mfd: Add support for twl6030 irq framework
This patch adds support for phoenix interrupt framework. New iInterrupt
status register A, B, C are introduced in Phoenix and are cleared on write.
Due to the differences in interrupt handling with respect to TWL4030,
twl6030-irq.c is created for TWL6030 PMIC

Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Signed-off-by: Balaji T K <balajitk@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-14 00:25:31 +01:00
Rajendra Nayak c4aa6f3143 mfd: Rename twl4030_ routines in twl-regulator.c
This patch renames all twl4030_ functions to twl so that regulator driver
can be reused by Triton - TWL4030 and Phoenix - TWL6030.

Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Signed-off-by: Balaji T K <balajitk@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: Kevin Hilman <khilman@deeprootsystems.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13 21:36:49 +01:00
Balaji T K ef3b7d0d3e mfd: Rename twl4030_ routines in rtc-twl.c
This patch renames all twl4030_ functions to twl_ so that RTC driver can be
shared between Triton and Phoenix.

Signed-off-by: Balaji T K <balajitk@ti.com>
Signed-off-by: Nayak Rajendra <rnayak@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13 21:30:48 +01:00
Balaji T K fc7b92fca4 mfd: Rename all twl4030_i2c*
This patch renames function names like twl4030_i2c_write_u8,
twl4030_i2c_read_u8 to twl_i2c_write_u8, twl_i2c_read_u8
and also common variable in twl-core.c

Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Signed-off-by: Balaji T K <balajitk@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13 21:23:33 +01:00
Santosh Shilimkar b07682b605 mfd: Rename twl4030* driver files to enable re-use
The upcoming TWL6030 is companion chip for OMAP4 like the current TWL4030
for OMAP3. The common modules like RTC, Regulator creates opportunity
to re-use the most of the code from twl4030.

This patch renames few common drivers twl4030* files to twl* to enable
the code re-use.

Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Signed-off-by: Balaji T K <balajitk@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13 20:05:51 +01:00
Amit Kucheria 147e084792 mfd: Clarify twl4030 return value for read and write
We should be checking if all the messages were tranferred. If not, then we
should propagate the i2c core error code or EIO.
Currently we return success (0) even if none of messages were transferred
successfully.

Signed-off-by: Amit Kucheria <amit.kucheria@verdurent.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13 19:22:00 +01:00
Juha Keski-Saari ab4abe056d mfd: Add all twl4030 regulators to the twl4030 mfd driver
Add all twl4030 regulators to the twl4030 mfd driver and
twl4030_platform_data

Signed-off-by: Juha Keski-Saari <ext-juha.1.keski-saari@nokia.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13 19:21:59 +01:00
Uwe Kleine-König be26d664de mfd: Don't set mc13783 ADREFMODE for touch conversions
Setting ADREFMODE is utter nonsense, but that's hard to read out of the
spec.  Strange enough it's possible to read x and y values even when
it's set.  When unset you can get values not only for the axes, but also
for contact resistance which allows the touch driver to report pressure
values.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13 19:21:57 +01:00
Uwe Kleine-König 9e2726776d mfd: Near complete mc13783 rewrite
This fixes several things while still providing the old API:

 - simplify and fix locking
 - better error handling
 - don't ack all irqs making it impossible to detect a reset of the
   rtc
 - use a timeout variant to wait for completion of ADC conversion
 - provide platform-data to regulator subdevice (This allows making
   struct mc13783 opaque for other drivers after the regulator driver is
   updated to use its platform_data.)
 - expose all interrupts
 - use threaded irq

After all users in mainline are converted to the new API, some things
(e.g. mc13783-private.h) can go away.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13 19:21:54 +01:00
Mark Brown d7f81c4416 mfd: Remove build time warning for WM835x register default tables
Systems using the WM835x need to choose which of the default register
settings are required on the system.  Currently there is a compile time
warning as well as a runtime error intended to flag up to users that
this is required but this also triggers for people building the driver
in order to obtain build coverage.

Remove the build warning, leaving only the runtime error, in order to
reduce noise for people doing generic kernel work.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13 19:21:53 +01:00
Mark Brown 0125350382 mfd: Force I2C to be built in when building WM831x
This works around issues with allmodconfig where it won't propagate the
dependency from the WM831x core back to the I2C and MFD cores.  When
doing allmodconfig this causes WM831x to be omitted and ensures that in
normal builds the dependencies get shaken out.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13 19:21:51 +01:00
Mark Brown 6e40173de9 mfd: Don't allow wm831x to be built as a module
The genirq infrastructure functions aren't currently exported,
preventing modular builds.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13 19:21:48 +01:00
Dan Carpenter cb9b224500 mfd: Fix incorrect error check for wm8350-core
It was *pdev which was allocated not pdev.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13 19:21:47 +01:00
Alan Cox 89f5f9f79e mfd: Fix twl4030 warning
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13 19:21:45 +01:00
Linus Walleij ecba96e696 mfd: Remove default selection of AB4500
This remove the default 'y' selection of AB4500, currently everyone
enabling the SPI subsystem will get a copy of this driver.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13 19:21:42 +01:00
Mark Brown 5fb4d38b19 mfd: Move WM831x to generic IRQ
Replace the wm831x-local IRQ infrastructure with genirq, allowing access
to the diagnostic infrastructure of genirq and allowing us to implement
interrupt support for the GPIOs.  The switchover is done within the
wm831x specific IRQ API, further patches will convert the individual
drivers to use genirq directly.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13 19:21:41 +01:00
Ilkka Koskinen 1920a61e20 mfd: Initial support for twl5031
TWL5031 introduces two new interrupts in PIH. Moreover, BCI
has changed remarkably and, thus, it's disabled when TWL5031
is in use.

Signed-off-by: Ilkka Koskinen <ilkka.koskinen@nokia.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13 19:21:41 +01:00
Mark Brown 6a6127462e mfd: Mask and unmask wm8350 IRQs on request and free
Bring the WM8350 IRQ API more in line with the generic IRQ API by
masking and unmasking interrupts as they are requested and freed.
This is mostly just a case of deleting the mask and unmask calls
from the individual drivers.

The RTC driver is changed to mask the periodic IRQ after requesting
it rather than only unmasking the alarm IRQ. If the periodic IRQ
fires in the period where it is reqested then there will be a
spurious notification but there should be no serious consequences
from this.

The CODEC drive is changed to explicitly disable headphone jack
detection prior to requesting the IRQs. This will avoid the IRQ
firing with no jack set up.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13 19:21:40 +01:00
Mark Brown 5a65edbc12 mfd: Convert wm8350 IRQ handlers to irq_handler_t
This is done as simple code transformation, the semantics of the
IRQ API provided by the core are are still very different to those
of genirq (mainly with regard to masking).

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13 19:21:39 +01:00
Antonio Ospite b9f96b5dcb mfd: ezx-pcap: Don't pass pcap pointer as subdev drvdata.
Abusing subdev drvdata is not needed anymore, as all pcap subdevs are now
retrieving the pcap pointer from their parent device.

This change removes a leftover coming from early versions of ezx-pcap and its
subdevs drivers.

Signed-off-by: Antonio Ospite <ospite@studenti.unina.it>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13 19:21:38 +01:00
Ben Dooks b45440c33a mfd: Allow configuration of VDCDC2 for tps65010
Add function to allow the configuation fo the VDCDC2 register by
external users, to allow changing of the standard and low-power
running modes.

This is needed, for example, for the Simtec IM2440D20 where we need
to use the low-power mode to shutdown the LDO/DCDC that are not needed
during suspend (saving substantial power) and the runtime use of the
low-power mode to change VCore.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Simtec Linux Team <linux@simtec.co.uk>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13 19:21:36 +01:00
Ben Dooks 8483699266 mfd: Allow the board to choose any GPIO base for tps65010
If the board does not care where the TPS turns up, then specifiying the
value -1 to get gpiolib to dynamically allocate the base for the chip
is valid.

Change the test to look for != 0, so that any boards specifying zero
will not end up with gpio that they didn't want.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Simtec Liunx Team <linux@simtec.co.uk>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13 19:21:34 +01:00
Ilkka Koskinen 38a684963f mfd: Enable twl4030 32kHz oscillator low-power mode
Allows TWL's 32kHz oscillator to go in low-power mode when
main battery voltage is running low.

Signed-off-by: Ilkka Koskinen <ilkka.koskinen@nokia.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13 19:21:33 +01:00
Amit Kucheria 53cf9a605d mfd: Fix more undefined twl4030-power resconfig value checks
Based on Aaro's previous fix, this needs to be fixed for the newly added
remap_off and remap_sleep resources as well.

The code tries to skip values initialized with -1, but since the values
are unsigned the comparison is always true.

The patch eliminates the following compiler warnings:

drivers/mfd/twl4030-power.c: In function 'twl4030_configure_resource':
drivers/mfd/twl4030-power.c:338: warning: comparison is always true due to
limited range of data type

Signed-off-by: Amit Kucheria <amit.kucheria@verdurent.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13 19:21:30 +01:00
Lars-Peter Clausen 24213ae19a mfd: Cleanup pcf50633_probe error handling
Currently the child devices were not freed if the irq could not be requested.
This patch restructures the function, that in case of an error all previously
allocated resources are freed.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13 19:21:28 +01:00
Mark Brown 4e8b70265c mfd: Staticise __adp5520_ack_bits()
The function is not exported as the __ indicates. __

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13 19:21:26 +01:00
Aaro Koskinen 56baa66797 mfd: fix undefined twl4030-power resconfig value checks
The code tries to skip values initialized with -1, but since the values
are unsigned the comparison is always true.

The patch eliminates the following compiler warnings:

drivers/mfd/twl4030-power.c: In function 'twl4030_configure_resource':
drivers/mfd/twl4030-power.c:338: warning: comparison is always true due to
limited range of data type
drivers/mfd/twl4030-power.c:358: warning: comparison is always true due to
limited range of data type
drivers/mfd/twl4030-power.c:363: warning: comparison is always true due to
limited range of data type

Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13 19:21:25 +01:00
Amit Kucheria b4ead61e57 mfd: Add support for remapping twl4030-power power states
The <RESOURCE>_REMAP register allows configuration of the <RESOURCE> in case
of a sleep or off transition.

Allow this property of resources to be configured (through twl4030_resconfig)
and add code to parse these values to program the registers accordingly.

Signed-off-by: Amit Kucheria <amit.kucheria@verdurent.com>
Cc: linux-omap@vger.kernel.org
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13 19:21:24 +01:00
Amit Kucheria 890463f0ff mfd: Add comments for the twl4030-power register and bit layout
Describe how the resource registers are laid out and the various bit-fields in
them.

Signed-off-by: Amit Kucheria <amit.kucheria@verdurent.com>
Cc: linux-omap@vger.kernel.org
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13 19:21:22 +01:00
Amit Kucheria e97d15469f mfd: twl4030-power: Rename DEVGROUP to DEV_GRP
Stick to the names used in the reference manual

Signed-off-by: Amit Kucheria <amit.kucheria@verdurent.com>
Cc: linux-omap@vger.kernel.org
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13 19:21:21 +01:00
Lars-Peter Clausen 98c2e49030 mfd: Fix pcf50633-regulator drvdata usage
Currently the pcf50633-regulator driver data is set to the pcf50633 core
structure, but the pcf50633-regulator remove handler assumes that it is set to
the regulator device. This patch fixes the issue by accessing the pcf506533
core structure through its parent device and setting the driver data to the
regulator device.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13 19:21:20 +01:00
Lars-Peter Clausen bbb2e496f7 mfd: Use platform_device_add_data to set pcf50633 regulator platform data
Platform devices allocated with platform_device_alloc should use
platform_device_add_data to set the platform data, because kfree will be called
on the platform_data when the device is released.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13 19:21:18 +01:00
Lars-Peter Clausen 68d641efd8 mfd: Fix memleak in pcf50633_client_dev_register
Since platform_device_add_data copies the passed data, the allocated
subdev_pdata is never freed. A simple fix would be to either free subdev_pdata
or put it onto the stack. But since the pcf50633 child devices can rely on
beeing children of the pcf50633 core device it's much more elegant to get access
to pcf50633 core structure through that link. This allows to get completly rid
of pcf5033_subdev_pdata.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13 19:21:17 +01:00
Arnaud Patard b18fdc4b3e mfd: Move pcf50633 messages to appropriate log levels
IRQs masking/unmasking should be less verbose.

Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13 19:21:15 +01:00
Lars-Peter Clausen 25993e4e42 mfd: Make pcf50633 suspend/resume belong to i2c_driver
When not using the i2c suspend/resume callbacks the i2c client resumed
before the i2c master.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13 19:21:12 +01:00
Paul Fertser 06b1cc9c05 mfd: Disable unnecessary pcf50633 shutdown on lowsys
On gta02 hardware revision A5 it can actually bring the system down
during normal operating conditions so we disable it.

Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13 19:21:07 +01:00
Mark Brown 0c7229f93a mfd: Convert WM835x IRQ handling to use a data table
Rather than open coding individual IRQs in each function which
manipulates them store data for IRQs in a table which is then
referenced in the users.

This is a substantial code shrink and should be a performance win in
cases where only a single IRQ goes off at once since instead of
reading four of the second level IRQ registers for each interrupt
we read only the sub-registers which have had an interrupt flagged.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13 19:21:02 +01:00
Mark Brown e0a3389ab9 mfd: Split wm8350 IRQ code into a separate file
In preparation for refactoring - it's over 700 lines of well-isolated
code and having it in a file by itself makes things more managable.

While we're at it make sure that we clean up the IRQ if we fail after
acquiring it on init.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13 19:20:55 +01:00
Michael Hennerich a5736e0b62 mfd: Add ADP5520/ADP5501 driver
Base driver for Analog Devices ADP5520/ADP5501 MFD PMICs

Subdevs:
LCD Backlight   : drivers/video/backlight/adp5520_bl.c
LEDs            : drivers/led/leds-adp5520.c
GPIO            : drivers/gpio/adp5520-gpio.c (ADP5520 only)
Keys            : drivers/input/keyboard/adp5520-keys.c (ADP5520 only)

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13 19:20:53 +01:00
Haojian Zhuang 15e0ff7a0c mfd: Fix 88PM8607 I2C dependency
88PM8607 depends on I2C and MFD_CORE. Since 88PM8607 is built-in
kernel, it also requires that I2C and MFD_CORE are built-in
kernel also.

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13 19:20:48 +01:00
Uwe Kleine-König 1e3edaf6c0 mfd: Move asic3_remove to .devexit.text
The function asic3_remove is used only wrapped by __devexit_p so define
it using __devexit.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13 19:20:46 +01:00