This commit adds percpu_rwsem tests based on the earlier rwsem tests.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Real time mutexes is one of the few general primitives
that we do not have in locktorture. Address this -- a few
considerations:
o To spice things up, enable competing thread(s) to become
rt, such that we can stress different prio boosting paths
in the rtmutex code. Introduce a ->task_boost callback,
only used by rtmutex-torturer. Tasks will boost/deboost
around every 50k (arbitrarily) lock/unlock operations.
o Hold times are similar to what we have for other locks:
only occasionally having longer hold times (per ~200k ops).
So we roughly do two full rt boost+deboosting ops with
short hold times.
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Currently we dont fail properly when pattern matching fails to find any
tracepoint.
Current behaviour:
$ perf record -e 'sched:krava*' sleep 1
WARNING: event parser found nothinginvalid or unsupported event: 'sched:krava*'
Run 'perf list' for a list of valid events
usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
This patch change:
$ perf record -e 'sched:krava*' sleep 1
event syntax error: 'sched:krava*'
\___ unknown tracepoint
Error: File /sys/kernel/debug/tracing/events/sched/krava* not found.
Hint: Perhaps this kernel misses some CONFIG_ setting to enable this feature?.
Run 'perf list' for a list of valid events
usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
Reported-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1444073477-3181-1-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Do it using the recently introduced ui_brower scrolling mode, setting
ui_browser.columns to the number of sort columns and then, when
rendering each line, skipping as many initial columns as the user
pressed the right arrow.
As the user presses the left arrow, the ui_browser code will remove the
scrolling counter and the left scrolling takes place.
The right arrow key was an alias for ENTER, so people used to press it
may get a bit annoyed at first, sorry! Ditto for ESC and the left key.
Callchains can be left as is or we can, when rendering the Symbol
column, store the at what position on the screen it is and then
using ui_browser__gotorc() to print it from there, i.e. the callchain
would move around with the symbol.
Leaving it as is, i.e. at a fixed position, close to the left, saves
precious screen real state for it, so I'm inclined to leave it as is
now.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Chandler Carruth <chandlerc@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-ccqq9sabgfge5dwbqjwh71ij@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If the classes derived from ui_browser want to do some sort of
horizontal scrolling, they have just to set ui_browser->columns to
the number of columns available.
Those columns can be the number of characters on the screen, if what is
desired is to scroll character by character, or the number of columns in
a spreadsheet like table.
This is what the hist_browser will do, skipping ui_browser->horiz_scroll
columns when rendering each of its lines.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-q6a22bpmpgcr1awgzrmd4jrs@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Which is the most common default found in other similar tools.
Requested-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Chandler Carruth <chandlerc@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://www.youtube.com/watch?v=nXaxk27zwlk
Link: http://lkml.kernel.org/n/tip-v8lq36aispvdwgxdmt9p9jd9@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Peter reports that it's possible to trigger a WARN_ON_ONCE() in the
Intel CQM code by combining a hardware event and an Intel CQM
(software) event into a group. Unfortunately, the perf tools are not
able to create this bundle and we need to manually construct a test
case.
For posterity, record Peter's proof of concept test case in tools/perf
so that it presents a model for how we can perform architecture
specific tests, or "arch tests", in perf in the future.
The particular issue triggered in the test case is that when the
counter for the hardware event overflows and triggers a PMI we'll read
both the hardware event and the software event counters.
Unfortunately, for CQM that involves performing an IPI to read the CQM
event counters on all sockets, which in NMI context triggers the
WARN_ON_ONCE().
Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kanaka Juvva <kanaka.d.juvva@intel.com>
Cc: Vikas Shivappa <vikas.shivappa@intel.com>
Cc: Vince Weaver <vince@deater.net>
Link: http://lkml.kernel.org/r/1437490509-15373-1-git-send-email-matt@codeblueprint.co.uk
Link: http://lkml.kernel.org/n/tip-3p4ra0u8vzm7m289a1m799kf@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move out the x86-specific tests into tools/perf/arch/x86/tests and
define an 'arch_tests' array, which is the list of tests that only apply
to the build architecture.
We can also now begin to get rid of some of the #ifdef code that is
present in the generic perf tests.
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kanaka Juvva <kanaka.d.juvva@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vikas Shivappa <vikas.shivappa@intel.com>
Cc: Vince Weaver <vince@deater.net>
Link: http://lkml.kernel.org/n/tip-9s68h4ptg06ah0lgnjz55mqn@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tests that only make sense for some architectures currently live in
the same place as the generic tests. Move out the x86-specific tests
into tools/perf/arch/x86/tests and define an 'arch_tests' array, which
is the list of tests that only apply to the build architecture.
The main idea is to encourage developers to add arch tests to build
out perf's test coverage, without dumping everything in
tools/perf/tests.
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kanaka Juvva <kanaka.d.juvva@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vikas Shivappa <vikas.shivappa@intel.com>
Cc: Vince Weaver <vince@deater.net>
Link: http://lkml.kernel.org/n/tip-p4uc1c15ssbj8xj7ku5slpa6@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding handling for '-h' and '-v' options to invoke help and version
command respectively.
Current behaviour is:
$ perf -v
Unknown option: -v
Usage: perf [--version] [--help] [OPTIONS] COMMAND [ARGS]
$ perf -h
Unknown option: -h
Usage: perf [--version] [--help] [OPTIONS] COMMAND [ARGS]
New behaviour:
$ perf -h
usage: perf [--version] [--help] [OPTIONS] COMMAND [ARGS]
The most commonly used perf commands are:
annotate Read perf.data (created by perf record) and display annotated code
archive Create archive with object files with build-ids found in perf.data file
bench General framework for benchmark suites
...
$ perf -v
perf version 4.3.rc3.gc99e32
Updated man page.
Requested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1444068369-20978-10-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We need to properly initialize column width for symbol_iaddr field, so
all symbols could fit in the column.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1444068369-20978-9-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Sorting on 'symbol' gives to broad a resolution as it can cover a range
of IP address. Use the iaddr instead to get proper sorting on IP
addresses. Need to use the 'mem_sort' feature of perf record.
New sort option is: symbol_iaddr, header label is 'Code Symbol'.
$ perf mem report --stdio -F +symbol_iaddr
# Overhead Samples Code Symbol Local Weight
# ........ ............ ........................ ............
#
54.08% 1 [k] nmi_handle 192
4.51% 1 [k] finish_task_switch 16
3.66% 1 [.] malloc 13
3.10% 1 [.] __strcoll_l 11
Signed-off-by: Don Zickus <dzickus@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1444068369-20978-8-git-send-email-jolsa@kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We cant test 'P' modifier gets properly parsed, the functionality test
itself is beyond this suite.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1444068369-20978-7-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'P' will cause the event to get maximum possible detected precise
level.
Following record:
$ perf record -e cycles:P ...
will detect maximum precise level for 'cycles' event and use it.
Commiter note:
Testing it:
$ perf record -e cycles:P usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.013 MB perf.data (9 samples) ]
$ perf evlist
cycles:P
$ perf evlist -v
cycles:P: size: 112, { sample_period, sample_freq }: 4000, sample_type:
IP|TID|TIME|PERIOD, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1,
enable_on_exec: 1, task: 1, precise_ip: 2, sample_id_all: 1, mmap2: 1,
comm_exec: 1
$
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1444068369-20978-6-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It'll be used in following patch.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1444068369-20978-5-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The annotated_source::sizeof_sym_hist could easily overflow int size,
resulting in crash in __symbol__inc_addr_samples.
Changing its type int size_t as was probably intended from beginning
based on the initialization code in symbol__alloc_hist.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1444068369-20978-4-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Because there's no point, PATH_MAX is big enough.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1444068369-20978-2-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The --interval-print parameter was limited to 100ms. However, for
example, 10ms is required to do sophisticated bandwidth analysis using
uncore events.
The test shows that the overhead of the system-wide uncore monitoring
with 10ms interval is only ~2%. So this patch reduces the minimal
interval-print allowd to 10ms.
But 10ms may not work well for all cases. For example, when the
cpus/threads number is very large, for system-wide core event monitoring
the overhead could be high.
To handle this issue, a warning will be displayed when the
interval-print is set between 10ms to 100ms. So users can make a
decision according to their specific cases.
# perf stat -e uncore_imc_1/cas_count_read/ -a --interval-print 10 -- sleep 1
print interval < 100ms. The overhead percentage could be high in some
cases. Please proceed with caution.
# time counts unit events
0.010200451 0.10 MiB uncore_imc_1/cas_count_read/
0.020475117 0.02 MiB uncore_imc_1/cas_count_read/
0.030692800 0.01 MiB uncore_imc_1/cas_count_read/
0.040948161 0.02 MiB uncore_imc_1/cas_count_read/
0.051159564 0.00 MiB uncore_imc_1/cas_count_read/
Signed-off-by: Kan Liang <kan.liang@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1443776674-42511-1-git-send-email-kan.liang@intel.com
[ Added warning about overhead when using sub 100ms intervals to the man page ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When run "perf record -e", the number of samples showed up is wrong on some
32 bit systems, i.e. powerpc and arm.
For example, run the below commands on 32 bit powerpc:
perf probe -x /lib/libc.so.6 malloc
perf record -e probe_libc:malloc -a ls perf.data
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.036 MB perf.data (13829241621624967218 samples) ]
Actually, "perf script" just shows 21 samples. The number of samples is also
absurd since samples is long type, but it is printed as PRIu64.
Build test ran on x86-64, x86, aarch64, arm, mips, ppc and ppc64.
Signed-off-by: Yang Shi <yang.shi@linaro.org>
Cc: linaro-kernel@lists.linaro.org
Link: http://lkml.kernel.org/r/1443563383-4064-1-git-send-email-yang.shi@linaro.org
[ Bumped the 'hits' var used together with record.samples to 'unsigned long long' too ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Allow probing on kernel modules when 'perf' is built without debuginfo
support.
Currently perf-probe --module requires linking with libdw, but this
doesn't make sense.
E.g.
----
# make NO_DWARF=1
# ./perf probe -m pcspkr pcspkr_event%return
Error: unknown switch `m'
----
With this patch
----
# ./perf probe -m pcspkr pcspkr_event%return
Added new event:
probe:pcspkr_event (on pcspkr_event%return in pcspkr)
You can now use it in all perf tools, such as:
perf record -e probe:pcspkr_event -aR sleep 1
----
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20151002125832.18617.78721.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Some PMUs, like the 'intel_bts' one can be used as an event name, i.e.:
$ perf record -e intel_bts:// usleep 1
Is a valid event name.
But the code printing such PMUs was not honouring the 'event_glob'
parameter, so the following line was always appearing:
$ intel_bts// [Kernel PMU event]
Fix it:
$ [acme@felicio linux]$ perf list data
List of pre-defined events (to be used in -e):
uncore_imc/data_reads/ [Kernel PMU event]
uncore_imc/data_writes/ [Kernel PMU event]
$
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-ajb71858n7q7ao77b8pyy74w@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
- intel_idle driver fixup for the recently added Skylake chips
support (Len Brown).
- Operating Performance Points (OPP) library fix related to the
recently added support for new DT bindings and a fix for a typo
in a comment (Viresh Kumar, Stephen Boyd).
- ACPI EC driver fix for a recently introduced memory leak in an
error code path (Lv Zheng).
- ACPI PCI IRQ management fix for the issue where an ISA IRQ is
shared with a PCI device which requires it to be configured in a
different way and may cause an interrupt storm to happen as a
result with an extra ACPI SCI IRQ handling simplification on top
of it (Jiang Liu).
- Update of the PCI power management documentation that became
outdated and started to actively confuse the readers to make
it actually reflect the code (Rafael J Wysocki).
- turbostat fixes including an IVB Xeon regression fix (related to
the --debug command line option), Skylake adjustment for the TSC
running at a frequency that doesn't match the base one exactly,
and a Knights Landing quirk to account for the fact that it only
updates APERF and MPERF every 1024 clock cycles plus bumping up
the turbostat version number (Len Brown, Hubert Chrzaniuk).
/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=ELup
-----END PGP SIGNATURE-----
Merge tag 'pm+acpi-4.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management and ACPI fixes from Rafael Wysocki:
"These are fixes mostly, for a few changes made in this cycle (the
intel_idle driver, the OPP library, the ACPI EC driver, turbostat) and
for some issues that have just been discovered (ACPI PCI IRQ
management, PCI power management documentation, turbostat), with a
couple of cleanups on top of them.
Specifics:
- intel_idle driver fixup for the recently added Skylake chips
support (Len Brown).
- Operating Performance Points (OPP) library fix related to the
recently added support for new DT bindings and a fix for a typo in
a comment (Viresh Kumar, Stephen Boyd).
- ACPI EC driver fix for a recently introduced memory leak in an
error code path (Lv Zheng).
- ACPI PCI IRQ management fix for the issue where an ISA IRQ is
shared with a PCI device which requires it to be configured in a
different way and may cause an interrupt storm to happen as a
result with an extra ACPI SCI IRQ handling simplification on top of
it (Jiang Liu).
- Update of the PCI power management documentation that became
outdated and started to actively confuse the readers to make it
actually reflect the code (Rafael J Wysocki).
- turbostat fixes including an IVB Xeon regression fix (related to
the --debug command line option), Skylake adjustment for the TSC
running at a frequency that doesn't match the base one exactly, and
a Knights Landing quirk to account for the fact that it only
updates APERF and MPERF every 1024 clock cycles plus bumping up the
turbostat version number (Len Brown, Hubert Chrzaniuk)"
* tag 'pm+acpi-4.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
tools/power turbosat: update version number
tools/power turbostat: SKL: Adjust for TSC difference from base frequency
tools/power turbostat: KNL workaround for %Busy and Avg_MHz
tools/power turbostat: IVB Xeon: fix --debug regression
ACPI / PCI: Remove duplicated penalty on SCI IRQ
ACPI, PCI, irq: Do not share PCI IRQ with ISA IRQ
ACPI / EC: Fix a memory leak issue in acpi_ec_query()
PM / OPP: Fix typo modifcation -> modification
PCI / PM: Update runtime PM documentation for PCI devices
PM / OPP: of_property_count_u32_elems() can return errors
intel_idle: Skylake Client Support - updated
The patch f9db0d0f1b ("perf callchain: Allow disabling call graphs
per event") added an ability to enable/disable callchain recording per
event. But it had a problem when the enablement setting is changed at
'perf report' time using -g/--call-graph option.
For example, the following scenario will get a segfault.
$ perf record -ag sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.500 MB perf.data (2555 samples) ]
$ perf report -g none
perf: Segmentation fault
-------- backtrace --------
perf[0x53a98a]
/usr/lib/libc.so.6(+0x335af)[0x7f4e91df95af]
This is because callchain_param.sort() callback was not set but it
tried to call the function as it had the PERF_SAMPLE_CALLCHAIN bit.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Fixes: f9db0d0f1b ("perf callchain: Allow disabling call graphs per event")
Link: http://lkml.kernel.org/r/1443587640-24242-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf top didn't add the idle/swapper thread to the machine's thread
list and its comm was displayed as ':0'. Fix it.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1443577526-3240-3-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf top uses 'dso,symbol' sort keys by default so it overlooked a
problem in task's comm resolving. When the sort key contains 'comm',
some task's comm is not shown properly. This is because the
perf_top__mmap_read_idx() checks the cpumode value improperly.
The cpumode value of non-sample events are 0 (PERF_RECORD_MISC_CPUMODE_
UNKNOWN) so the events will be ignored by the switch statement. This patch
allows it for non-sample events.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1443577526-3240-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
A previous patch added a synthesized comm event for forked child process
but it missed that the event should contain area for sample_id_hdr at
the end. It worked by accident since the perf_event union contains
bigger event structs like mmap_events.
This patch fixes it by dynamically allocating event struct including
those area like in perf_event__synthesize_thread_map().
Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1443577526-3240-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This adds a benchmark directory to the powerpc selftests and adds a
gettimeofday() benchmark to it.
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
If the user doesn't specify any event, try the most precise "cycles"
available, i.e. start by "cycles:ppp" and go on removing "p" till it
works.
E.g.
$ perf record usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.017 MB perf.data (11 samples) ]
$ perf evlist
cycles:pp
$ perf evlist -v
cycles:pp: size: 112, { sample_period, sample_freq }: 4000, sample_type:
IP|TID|TIME|PERIOD, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1,
enable_on_exec: 1, task: 1, precise_ip: 2, sample_id_all: 1,
exclude_guest: 1, mmap2: 1, comm_exec: 1
$ grep 'model name' /proc/cpuinfo | head -1
model name : Intel(R) Core(TM) i7-3667U CPU @ 2.00GHz
$
When 'cycles' appears explicitely is specified this will not be tried,
i.e. the user has full control of the level of precision to be used:
$ perf record -e cycles usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.016 MB perf.data (9 samples) ]
$ perf evlist
cycles
$ perf evlist -v
cycles: size: 112, { sample_period, sample_freq }: 4000, sample_type:
IP|TID|TIME|PERIOD, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1,
enable_on_exec: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2:
1, comm_exec: 1
$
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Chandler Carruth <chandlerc@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://www.youtube.com/watch?v=nXaxk27zwlk
Link: http://lkml.kernel.org/n/tip-b1ywebmt22pi78vjxau01wth@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that one can, for instance, use it with wc -l:
# perf list *:*write* | wc -l
60
Or to look for the "bio" tracepoints, without 'perf list' headers:
# perf list *:*bio* | head
block:block_bio_backmerge [Tracepoint event]
block:block_bio_bounce [Tracepoint event]
block:block_bio_complete [Tracepoint event]
block:block_bio_frontmerge [Tracepoint event]
block:block_bio_queue [Tracepoint event]
block:block_bio_remap [Tracepoint event]
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-ts7sc0x8u4io4cifzkup4j44@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf probe shows more precisely message when it finds given
%return target function is inlined.
Without this fix:
----
# ./perf probe -V getname_flags%return
Return probe must be on the head of a real function.
Debuginfo analysis failed.
Error: Failed to show vars.
----
With this fix:
----
# ./perf probe -V getname_flags%return
Failed to find "getname_flags%return",
because getname_flags is an inlined function and has no return point.
Debuginfo analysis failed.
Error: Failed to show vars.
----
Suggested-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20150930164137.3733.55055.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf probe --list will get a segfault if the first kprobe event is on a
module and the second or latter one is on the kernel.
e.g.
----
# ./perf probe -q -m pcspkr pcspkr_event
# ./perf probe -q vfs_read
# ./perf probe -l
Segmentation fault (core dumped)
----
This is because the debuginfo_cache fails to handle NULL module name,
which causes segfault on strcmp. (Note that strcmp("something", NULL)
always causes segfault)
To fix this debuginfo_cache__open always translates the NULL module name
to "kernel" (this is correct, because NULL module name means opening the
debuginfo for the kernel)
----
# ./perf probe -l
probe:pcspkr_event (on pcspkr_event@drivers/input/misc/pcspkr.c
in pcspkr)
probe:vfs_read (on vfs_read@ksrc/linux-3/fs/read_write.c)
----
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20150930164135.3733.23993.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Perf probe always failed to find appropriate line numbers because of
failing to find .text start address offset from debuginfo.
e.g.
----
# ./perf probe -m pcspkr pcspkr_event:5
Added new events:
probe:pcspkr_event (on pcspkr_event:5 in pcspkr)
probe:pcspkr_event_1 (on pcspkr_event:5 in pcspkr)
You can now use it in all perf tools, such as:
perf record -e probe:pcspkr_event_1 -aR sleep 1
# ./perf probe -l
Failed to find debug information for address ffffffffa031f006
Failed to find debug information for address ffffffffa031f016
probe:pcspkr_event (on pcspkr_event+6 in pcspkr)
probe:pcspkr_event_1 (on pcspkr_event+22 in pcspkr)
----
This fixes the above issue as below.
1. Get the relative address of the symbol in .text by using
map->start.
2. Adjust the address by adding the offset of .text section
in the kernel module binary.
With this fix, perf probe -l shows lines correctly.
----
# ./perf probe -l
probe:pcspkr_event (on pcspkr_event:5@drivers/input/misc/pcspkr.c in pcspkr)
probe:pcspkr_event_1 (on pcspkr_event:5@drivers/input/misc/pcspkr.c in pcspkr)
----
Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20150930164132.3733.24643.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix a trival bug about libdwfl usage of the report session, it should
explicitly begin and end a report session around dwfl_report_offline().
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20150930164128.3733.59876.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix to remove dot suffix (e.g. .const, .isra) from the second or latter
events which has suffix numbers.
Since the previous commit 35a23ff928 ("perf probe: Cut off the gcc
optimization postfixes from function name") didn't care about the suffix
numbered events, therefore we'll have an error when we add additional
events on the same dot suffix functions.
e.g.
----
# ./perf probe -f -a get_sigframe.isra.2.constprop.3 \
-a get_sigframe.isra.2.constprop.3
Failed to write event: Invalid argument
Error: Failed to add events.
----
This fixes above issue as below:
----
# ./perf probe -f -a get_sigframe.isra.2.constprop.3 \
-a get_sigframe.isra.2.constprop.3
Added new events:
probe:get_sigframe (on get_sigframe.isra.2.constprop.3)
probe:get_sigframe_1 (on get_sigframe.isra.2.constprop.3)
You can now use it in all perf tools, such as:
perf record -e probe:get_sigframe_1 -aR sleep 1
----
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20150930164130.3733.26573.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Map 't', 'T' (text, local, global), 'w' and 'W' (weak text, local,
global) as STT_FUNC, and the rest as STT_OBJECT
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-sbwcixulpc5v1xuxn3xvm0nn@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It is about binding, not type, we have just a letter in kallsyms that
should map both for the ELF type (STT_FUNC, etc) and to the ELF
symbol binding (STB_WEAK, STB_GLOBAL, etc), so rename it now before
introducing kallsyms2_elf_type()
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-uu5vj343ms1q2wm55690on6v@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
And it is also a step in the direction of killing the separation of data
and text maps in map_groups.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-rrds86kb3wx5wk8v38v56gw8@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In places where we were using its open coded equivalent.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-khkdugcdoqy3tkszm3jdxgbe@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf_regs.c file does not get built on Powerpc as CONFIG_PERF_REGS
is false. So the weak definition for 'sample_regs_masks' doesn't get
picked up.
Adding perf_regs.o to util/Build unconditionally, exposes a redefinition
error for 'perf_reg_value()' function (due to the static inline version
in util/perf_regs.h). So use #ifdef HAVE_PERF_REGS_SUPPORT' around that
function.
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Dominik Dingel <dingel@linux.vnet.ibm.com>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: linuxppc-dev@ozlabs.org
Link: http://lkml.kernel.org/r/20150930182836.GA27858@us.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The --max_stack option was added as an optimization to reduce processing time,
so people specifying --max-stack might get a increased processing time if
combined with synthesized callchains, but otherwise no real harm.
A warning about setting both --max_stack and the synthesized callchains max
depth seems like overkill. Amend the documentation.
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/560A5155.4060105@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Out of map_groups__find_symbol_by_name(), so that we can turn this later
one first into a call to maps__find_symbol_by_name(MAP__FUNCTION) +
MAP__VARIABLE, and then to just one call, we'll merge MAP__FUNCTION with
MAP__VARIABLE maps, to simplify the code.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-pvkar0jacqn92g148u9sqttt@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The error variable breaks build on CentOS 6.7, due to a collision with a
global error symbol:
CC util/parse-events.o
cc1: warnings being treated as errors
util/parse-events.c:419: error: declaration of ‘error’ shadows a global
declaration
util/util.h:135: error: shadowed declaration is here
util/parse-events.c: In function ‘add_tracepoint_multi_event’:
...
Using different argument names instead to fix it.
Reported-by: Vinson Lee <vlee@twopensource.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: linux-tip-commits@vger.kernel.org
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Raphael Beamonte <raphael.beamonte@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20150929150531.GI27383@krava.redhat.com
[ Fix one more case, at line 770 ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The error variable breaks build on CentOS 6.7, due to collision with
global error symbol:
CC util/evlist.o
cc1: warnings being treated as errors
In file included from util/evlist.c:28:
tools/include/linux/err.h: In function ‘ERR_PTR’:
tools/include/linux/err.h:34: error: declaration of ‘error’ shadows a global declaration
util/util.h:135: error: shadowed declaration is here
Using 'error_' name instead to fix it.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/n/tip-i9mdgdbrgauy3fe76s9rd125@git.kernel.org
Reported-by: Vinson Lee <vlee@twopensource.com>
[ Use 'error_' instead of 'err' to, visually, not diverge too much from include/linux/err.h ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
New device support
* APDS9960 ALS + proximity driver
* bmg160 SPI devices.
* HDC100x humidity sensors
* Holt HI-8435 threshold detector
* mma8453Q accelerometer added to the mma8452 driver
* mma86452FC and mma8653FC accelerometers added to the mma8452 driver
* mxc4005 accelerometer
* PulsedLight LIDAR
* SensorTech VZ89x volatile organic compound sensor
* UPISEMI uS5182d ALS and proximity sensors
New core functionality
* triggered events - use triggers to check for changes in threshold type
detectors on devices with out interrupt support. First user is the holt
comparator.
* chemical concentration and resistance channel types.
New driver functionality
* vf610
- buffer support.
- followup coccinelle warning fix.
Core rework
* buffers
- break out callback buffer to own module.
- move buffer implementations to a new subdirectory
* percolate the error code form iio_event_getfd out to userspace
rather than giving a missleading error later on.
Cleanups
* adddac drivers
- use BIT macro where appropriate.
* meter drivers
- use BIT macro where appropriate.
* ad7303
- add an OF match table to line up with the binding docs.
* adc128s052
- add an OF match table to line up with the binding docs.
* adf4350
- add an OF match table to line up with the binding docs
* as3935
- add an OF match table to line up with the binding docs.
* berlin2-adc
- use GENMASK and BIT for masks
- prevent attempting to sample multiple channels at once by moving a
mutex scop
- coding style cleanups
* bmg150_magn
- kconfig sort order was wrong - fix it.
* bmg160
- use i2c regmap and drop all uses of i2c_client
- separate i2c and core driver
* cc10001_adc
- kconfig sort order was wrong - fix it.
* evgen (dummy driver helper module)
- move interrupt generation to irq_work to reduce differences between
the dummy driver and real hardware drivers.
* hmc5843
- set the name dynamically rather than to a fixed value for one of the
suported parts.
- export module alias information to allow autoprobing of module.
* lpc32xx
- on failure to get resource or irq return -ENXIO as uppose to -EBUSY
* max1027
- set .of_match_table to actually allow OF style matching.
* max5821
- add MODULE_DEVICE_TABLE for OF table.
* mma8452
- refactor to separate out chip specific data.
- add freefall / motion interrupt source for devices that do their
interrupts slightly differently.
- update copywrite notice.
- leave naming of events directory in sysfs to the core
* mcp320x
- set .of_match_table so that it can be use for OF style matching.
* mlx90614
- Implement filter configuration (note the datasheet changed as a result
of the driver reviews to include the values we needed ;)
* opt3001
- drop .owner field as assigned by platform driver core.
* si7020
- replace a bitmask on the humidity values with a more correct range
check.
* stk310
- improved error handling.
- use BIT macro where appropriate and use the resulting defines
instead of magic numbers in the code.
- fix indentation
* st-sensors
- add debugfs register read hook
* tsl4531
- fix error handling in check_id
* twl6030
- fix module autoload for OF
* iio-trig-sysfs
- document add and remove attribute
* trigger in staging
- code alignment fixes.
- braces on both branches of if statement if needed for one.
* xilinx-xadc
- push interrupts into hardirq context as there isn't much in them
any more and it avoids breaking PREEMPT_RT builds due to the use
of a spinlock between the hardirq and the thread.
Tools
* event-monitor
- report unsupported events. We keep expanding what can come from drivers
so give a helpful error if one turns up in an out of date userspace
program.
* generic-buffer
- helpful message about needing to enable a channel to start the buffer.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=E+jf
-----END PGP SIGNATURE-----
Merge tag 'iio-for-4.4a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
First round of new driver, new functionality and cleanups for IIO in the 4.4 cycle
New device support
* APDS9960 ALS + proximity driver
* bmg160 SPI devices.
* HDC100x humidity sensors
* Holt HI-8435 threshold detector
* mma8453Q accelerometer added to the mma8452 driver
* mma86452FC and mma8653FC accelerometers added to the mma8452 driver
* mxc4005 accelerometer
* PulsedLight LIDAR
* SensorTech VZ89x volatile organic compound sensor
* UPISEMI uS5182d ALS and proximity sensors
New core functionality
* triggered events - use triggers to check for changes in threshold type
detectors on devices with out interrupt support. First user is the holt
comparator.
* chemical concentration and resistance channel types.
New driver functionality
* vf610
- buffer support.
- followup coccinelle warning fix.
Core rework
* buffers
- break out callback buffer to own module.
- move buffer implementations to a new subdirectory
* percolate the error code form iio_event_getfd out to userspace
rather than giving a missleading error later on.
Cleanups
* adddac drivers
- use BIT macro where appropriate.
* meter drivers
- use BIT macro where appropriate.
* ad7303
- add an OF match table to line up with the binding docs.
* adc128s052
- add an OF match table to line up with the binding docs.
* adf4350
- add an OF match table to line up with the binding docs
* as3935
- add an OF match table to line up with the binding docs.
* berlin2-adc
- use GENMASK and BIT for masks
- prevent attempting to sample multiple channels at once by moving a
mutex scop
- coding style cleanups
* bmg150_magn
- kconfig sort order was wrong - fix it.
* bmg160
- use i2c regmap and drop all uses of i2c_client
- separate i2c and core driver
* cc10001_adc
- kconfig sort order was wrong - fix it.
* evgen (dummy driver helper module)
- move interrupt generation to irq_work to reduce differences between
the dummy driver and real hardware drivers.
* hmc5843
- set the name dynamically rather than to a fixed value for one of the
suported parts.
- export module alias information to allow autoprobing of module.
* lpc32xx
- on failure to get resource or irq return -ENXIO as uppose to -EBUSY
* max1027
- set .of_match_table to actually allow OF style matching.
* max5821
- add MODULE_DEVICE_TABLE for OF table.
* mma8452
- refactor to separate out chip specific data.
- add freefall / motion interrupt source for devices that do their
interrupts slightly differently.
- update copywrite notice.
- leave naming of events directory in sysfs to the core
* mcp320x
- set .of_match_table so that it can be use for OF style matching.
* mlx90614
- Implement filter configuration (note the datasheet changed as a result
of the driver reviews to include the values we needed ;)
* opt3001
- drop .owner field as assigned by platform driver core.
* si7020
- replace a bitmask on the humidity values with a more correct range
check.
* stk310
- improved error handling.
- use BIT macro where appropriate and use the resulting defines
instead of magic numbers in the code.
- fix indentation
* st-sensors
- add debugfs register read hook
* tsl4531
- fix error handling in check_id
* twl6030
- fix module autoload for OF
* iio-trig-sysfs
- document add and remove attribute
* trigger in staging
- code alignment fixes.
- braces on both branches of if statement if needed for one.
* xilinx-xadc
- push interrupts into hardirq context as there isn't much in them
any more and it avoids breaking PREEMPT_RT builds due to the use
of a spinlock between the hardirq and the thread.
Tools
* event-monitor
- report unsupported events. We keep expanding what can come from drivers
so give a helpful error if one turns up in an out of date userspace
program.
* generic-buffer
- helpful message about needing to enable a channel to start the buffer.
The function returns always non-negative values.
The problem has been detected using proposed semantic patch
scripts/coccinelle/tests/assign_signed_to_unsigned.cocci [1].
[1]: http://permalink.gmane.org/gmane.linux.kernel/2046107
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Adds rules for parsing tracepoint names. Change rules of tracepoint which
derives from PE_NAMEs into tracepoint names directly, so adding more rules
based on tracepoint names will be easier.
Changes v2-v3:
- Change __event_legacy_tracepoint label in bison file to tracepoint_name
- Fix formats error.
Signed-off-by: He Kuang <hekuang@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1443412336-120050-3-git-send-email-hekuang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Show proper error message and show valid terms when wrong config terms
is specified for hw/sw type perf events.
This patch makes the original error format function formats_error_string()
more generic, which only outputs the static config terms for hw/sw perf
events, and prepends pmu formats for pmu events.
Before this patch:
$ perf record -e 'cpu-clock/freqx=200/' -a sleep 1
invalid or unsupported event: 'cpu-clock/freqx=200/'
Run 'perf list' for a list of valid events
usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
After this patch:
$ perf record -e 'cpu-clock/freqx=200/' -a sleep 1
event syntax error: 'cpu-clock/freqx=200/'
\___ unknown term
valid terms: config,config1,config2,name,period,freq,branch_type,time,call-graph,stack-size
Run 'perf list' for a list of valid events
usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
Signed-off-by: He Kuang <hekuang@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1443412336-120050-2-git-send-email-hekuang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently, function config_term() is used for checking config terms of
all types of events, while unknown terms is not reported as an error
because pmu events have valid terms in sysfs.
But this is wrong when unknown terms are specificed to hw/sw events.
This patch Adds the config_term callback so we can use separate check
routines for each type of events.
Signed-off-by: He Kuang <hekuang@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1443412336-120050-1-git-send-email-hekuang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
autofdo incorrectly expects branch flags to include either mispred or
predicted. In fact mispred = predicted = 0 is valid and means the flags
are not supported, which they aren't by Intel PT.
To make autofdo work, add a config option which will cause Intel PT
decoder to set the mispred flag on all branches.
Below is an example of using Intel PT with autofdo. The example is
also added to the Intel PT documentation. It requires autofdo
(https://github.com/google/autofdo) and gcc version 5. The bubble
sort example is from the AutoFDO tutorial (https://gcc.gnu.org/wiki/AutoFDO/Tutorial)
amended to take the number of elements as a parameter.
$ gcc-5 -O3 sort.c -o sort_optimized
$ ./sort_optimized 30000
Bubble sorting array of 30000 elements
2254 ms
$ cat ~/.perfconfig
[intel-pt]
mispred-all
$ perf record -e intel_pt//u ./sort 3000
Bubble sorting array of 3000 elements
58 ms
[ perf record: Woken up 2 times to write data ]
[ perf record: Captured and wrote 3.939 MB perf.data ]
$ perf inject -i perf.data -o inj --itrace=i100usle --strip
$ ./create_gcov --binary=./sort --profile=inj --gcov=sort.gcov -gcov_version=1
$ gcc-5 -O3 -fauto-profile=sort.gcov sort.c -o sort_autofdo
$ ./sort_autofdo 30000
Bubble sorting array of 30000 elements
2155 ms
Note there is currently no advantage to using Intel PT instead of LBR,
but that may change in the future if greater use is made of the data.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1443186956-18718-26-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a new option --strip which is used with --itrace to strip out
non-synthesized events. This results in a perf.data file that is
simpler for external tools to parse. In particular, this can be used to
prepare a perf.data file for consumption by autofdo.
A subsequent patch makes a change to Intel PT also to enable use with
autofdo and gives an example of that use.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1443186956-18718-25-git-send-email-adrian.hunter@intel.com
[ Made it use perf_evlist__remove() + perf_evsel__delete() ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf inject can process instruction traces (using the --itrace option)
which removes aux-related events and replaces them with the requested
synthesized events.
However there are still some leftovers, namely PERF_RECORD_ITRACE_START
events and the original evsel (selected event) e.g. intel_pt//
For the sake of completeness, remove them too.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1443186956-18718-24-git-send-email-adrian.hunter@intel.com
[ Made it use perf_evlist__remove() + perf_evsel__delete() ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a counterpart to perf_evlist__add() that does the opposite and
deletes the evsel.
This will be used by perf inject to remove unwanted evsels.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1443186956-18718-23-git-send-email-adrian.hunter@intel.com
[ Renamed it from perf_evlist__del() to perf_evlist__remove() and removed the perf_evsel__delete() call ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf_evlist__id2evsel_strict() is the same as perf_evlist__id2evsel()
except that it ensures that the id must match.
This will be used by perf inject to find a specific evsel that is to be
deleted, hence the need to match exactly.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1443186956-18718-22-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf script has a setting to set the maximum stack depth when processing
callchains. The setting defaults to the hard-coded maximum definition
PERF_MAX_STACK_DEPTH which is 127.
It is possible, when processing instruction traces, to synthesize
callchains. Synthesized callchains do not have the kernel size
limitation and are whatever size the user requests, although validation
presently prevents the user requested a value greater that 1024. The
default value is 16.
To allow for synthesized callchains, make the scripting_max_stack value
at least the same size as the synthesized callchain size.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1443186956-18718-21-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use the max_stack value instead of PERF_MAX_STACK_DEPTH so that
arbitrary-sized callchains can be supported.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1443186956-18718-17-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf report has an option (--max-stack) to set the maximum stack depth
when processing callchains. The option defaults to the hard-coded
maximum definition PERF_MAX_STACK_DEPTH which is 127. The intention of
the option is to allow the user to reduce the processing time by
reducing the amount of the callchain that is processed.
It is also possible, when processing instruction traces, to synthesize
callchains. Synthesized callchains do not have the kernel size
limitation and are whatever size the user requests, although validation
presently prevents the user requested a value greater that 1024. The
default value is 16.
To allow for synthesized callchains, make the max_stack value at least
the same size as the synthesized callchain size.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1443186956-18718-16-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add support for generating branch stack context for PT samples. The
decoder reports a configurable number of branches as branch context for
each sample. Internally it keeps track of them by using a simple sliding
window. We also flush the last branch buffer on each sample to avoid
overlapping intervals.
This is useful for:
- Reporting accurate basic block edge frequencies through the perf
report branch view
- Using with --branch-history to get the wider context of samples
- Other users of LBRs
Also the Documentation is updated.
Examples:
Record with Intel PT:
perf record -e intel_pt//u ls
Branch stacks are used by default if synthesized so:
perf report --itrace=ile
is the same as:
perf report --itrace=ile -b
Branch history can be requested also:
perf report --itrace=igle --branch-history
Based-on-patch-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1443186956-18718-15-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
intel_pt_synth_branch_sample() skips synthesizing if the branch does not
match the branch filter. That logic was sitting in the middle of the
function but is more efficiently placed at the start of the function, so
move it.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1443186956-18718-14-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The branch stack feature flag is set by 'perf record' when recording
data that contains branch stacks. Consequently, when 'perf inject'
synthesizes branch stacks, the feature flag should be set also.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1443186956-18718-13-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
A non-synthesized event might not have a branch stack if branch stacks
have been synthesized (using itrace options).
An example of that is when Intel PT records sched_switch events for
decoding purposes. Those sched_switch events do not have branch stacks
even though the Intel PT decoder may be synthesizing other events that
do due to the itrace options.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1443186956-18718-12-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'perf report' tool will default to displaying branch stacks (-b
option) if they are present. Make that also happen for synthesized
branch stacks.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1443186956-18718-11-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf report looks at event sample types to determine if branch stacks
have been sampled. Adjust the validation to know about instruction
tracing options.
This change allows the use of the -b option which otherwise would
complain with an error like:
Error:
Selected -b but no branch data. Did you call perf record without -b?
# To display the perf.data header info,
# please use --header/--header-only options.
#
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1443186956-18718-10-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add AUX area tracing option 'l' to synthesize branch stacks on samples
just like sample type PERF_SAMPLE_BRANCH_STACK. This is taken into use
by Intel PT in a subsequent patch.
Based-on-patch-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1443186956-18718-9-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add some comments to the script and some 'views' to the created database
that better illustrate the database structure and how it can be used.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1443186956-18718-8-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
By default 'perf record' will postprocess the perf.data file to
determine build-ids. When that happens, the number of lost perf events
is displayed.
Make that also happen for AUX events.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1443186956-18718-7-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add option --ns to display time to 9 decimal places. That is useful in
some cases, for example when using Intel PT cycle accurate mode.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1443186956-18718-6-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Logging is only used for debugging. Use macros to save calling into the
functions only to return immediately when logging is not enabled.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1443186956-18718-5-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
TSC packets contain only 7 bytes of TSC. The 8th byte is assumed to
change so infrequently that its value can be inferred. However the
logic must cater for a 7 byte wraparound, which it does by adding 1 to
the top byte.
The existing code was doing that with a while loop even though the
addition should only need to be done once. That logic won't work (will
loop forever) if TSC wraps around at the 8th byte. Theoretically that
would take at least 10 years, unless something else went wrong.
And what else could go wrong. Well, if the chunks of trace data are
processed out of order, it will make it look like the 7-byte TSC has
gone backwards (i.e. wrapped). If that happens 256 times then stuck in
the while loop it will be.
Fix that by getting rid of the unnecessary while loop.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1443186956-18718-4-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Processing instruction tracing data (e.g. Intel PT) can synthesize
callchains e.g.
$ perf record -e intel_pt//u uname
$ perf report --stdio --itrace=ige
However perf report's callgraph option gets extra validation, so:
$ perf report --stdio --itrace=ige -gflat
Error:
Selected -g or --branch-history but no callchain data. Did
you call 'perf record' without -g?
# To display the perf.data header info,
# please use --header/--header-only options.
#
Fix the validation to know about instruction tracing options so
above command works.
A side-effect of the change is that the default option to
accumulate the callchain of child functions comes into force.
To get the previous behaviour the --no-children option can be
used e.g.
$ perf report --stdio --itrace=ige -gflat --no-children
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1443186956-18718-3-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Instruction tracing options (i.e. --itrace) include an option for
sampling instructions at an arbitrary period. e.g.
--itrace=i10us
means make an 'instructions' sample for every 10us of trace.
Currently the logic does not distinguish between a period of
zero and no period being specified at all, so it gets treated
as the default period which is 100000. That doesn't really
make sense.
Fix it so that zero period is accepted and treated as meaning
"as often as possible".
In the case of Intel PT that is the same as a period of 1 and
a unit of 'instructions' (i.e. --itrace=i1i).
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1443186956-18718-2-git-send-email-adrian.hunter@intel.com
[ Add a few lines describing this in the Documentation/intel-pt.txt file ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding the fixdep target into the Makefile.include to ease up building of
fixdep helper, that needs to be built before we dive in to the build itself.
The user can invoke the fixdep target to build the helper.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1443004442-32660-8-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
And use the new 'prepare' target for the $(PERF_IN) target.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1443004442-32660-7-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Making the fixdep helper to be invoked within dep-cmd.
Each user of the build framework needs to make sure fixdep exists before
executing the build itself.
If the build doesn't find fixdep, it falls back to the old style
dependency tracking.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1443004442-32660-6-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So it's easier to add more functionality in the following commit.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1443004442-32660-5-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For dependency tracking we currently use targets that fall out of the
gcc -MD command. We store this info in the .cmd file and include as
makefile during the build.
This format put object as target and all the c and header files as
dependencies, like:
util/abspath.o: util/abspath.c /usr/include/stdc-predef.h util/cache.h \
/usr/include/bits/wordsize.h /usr/include/gnu/stubs.h \
...
If any of those dependency header files (krava.h below) is removed the
build fails on:
make[1]: *** No rule to make target 'krava.h', needed by 'inc.o'. Stop.
This patch adds fixdep helper, that is used by kbuild to alter the shape
of the object dependencies like:
source_util/abspath.o := util/abspath.c
deps_util/abspath.o := \
/usr/include/stdc-predef.h \
util/cache.h \
...
util/abspath.o: $(deps_util/abspath.o)
$(deps_util/abspath.o):
With this format the header removal won't make the build fail, because
it'll be picked up by the last empty target defined for each header.
As previously mentioned the fixdep tool is taken from kbuild. It's not
complete backport, only the part that alters the standard dependency
info was taken, the part that adds the CONFIG_* dependency logic will be
probably taken later on.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Kai Germaschewski <kai.germaschewski@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1443004442-32660-4-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The current build framework fails to cope with header file removal. The
reason is that the removed header file stays in the .cmd file target
rule and forces the build to fail.
This issue is fixed and explained in the following patches.
Adding a new build test that simulates header removal.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1443004442-32660-3-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To ease up build framework code setup for users.
More shared code will be added in the following patches.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1443004442-32660-2-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Storing the actual tracing path mountpoint to display correct
error message hint ('Hint:' line). The error hint rediscovers
mountpoints, but it could be different from what we actually
used in tracing path.
Before we'd display debugfs mount even though tracefs was used:
$ perf record -e sched:sched_krava ls
event syntax error: 'sched:sched_krava'
\___ can't access trace events
Error: No permissions to read /sys/kernel/debug/tracing/events/sched/sched_krava
Hint: Try 'sudo mount -o remount,mode=755 /sys/kernel/debug'
...
After this change, correct mountpoint is displayed:
$ perf record -e sched:sched_krava ls
event syntax error: 'sched:sched_krava'
\___ can't access trace events
Error: No permissions to read /sys/kernel/debug/tracing/events/sched/sched_krava
Hint: Try 'sudo mount -o remount,mode=755 /sys/kernel/debug/tracing'
...
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Raphael Beamonte <raphael.beamonte@gmail.com>
Link: http://lkml.kernel.org/r/1442674027-19427-1-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The map is what should say if an ELF (or some other format) image is
being used for some particular purpose, as a kernel, host or guest.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-zufousvfar0710p4qj71c32d@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Instead of using dso->kernel, this is equivalent at the moment,
and helps in reducing the accesses to dso->kernel.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-1pc2v63iphtifovw3bv0bo1v@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull perf fixes from Thomas Gleixner:
"Another pile of fixes for perf:
- Plug overflows and races in the core code
- Sanitize the flow of the perf syscall so we error out before
handling the more complex and hard to undo setups
- Improve and fix Broadwell and Skylake hardware support
- Revert a fix which broke what it tried to fix in perf tools
- A couple of smaller fixes in various places of perf tools"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf tools: Fix copying of /proc/kcore
perf intel-pt: Remove no_force_psb from documentation
perf probe: Use existing routine to look for a kernel module by dso->short_name
perf/x86: Change test_aperfmperf() and test_intel() to static
tools lib traceevent: Fix string handling in heterogeneous arch environments
perf record: Avoid infinite loop at buildid processing with no samples
perf: Fix races in computing the header sizes
perf: Fix u16 overflows
perf: Restructure perf syscall point of no return
perf/x86/intel: Fix Skylake FRONTEND MSR extrareg mask
perf/x86/intel/pebs: Add PEBS frontend profiling for Skylake
perf/x86/intel: Make the CYCLE_ACTIVITY.* constraint on Broadwell more specific
perf tools: Bool functions shouldn't return -1
tools build: Add test for presence of __get_cpuid() gcc builtin
tools build: Add test for presence of numa_num_possible_cpus() in libnuma
Revert "perf symbols: Fix mismatched declarations for elf_getphdrnum"
perf stat: Fix per-pkg event reporting bug
For ctrl out test, it needs length > vary, so in order to run it with
default parameters, we do this change.
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Cc: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
The 'length' is the transfer length, not the packet size, so
change the help text.
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Cc: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Pull turbostat updates for v4.3 from Len Brown.
* 'turbostat' of https://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
tools/power turbosat: update version number
tools/power turbostat: SKL: Adjust for TSC difference from base frequency
tools/power turbostat: KNL workaround for %Busy and Avg_MHz
tools/power turbostat: IVB Xeon: fix --debug regression
On a Skylake with 1500MHz base frequency,
the TSC runs at 1512MHz.
This is because the TSC is no longer in the n*100 MHz BCLK domain,
but is now in the m*24MHz crystal clock domain. (24 MHz * 63 = 1512 MHz)
This adds error to several calculations in turbostat,
unless the TSC sample sizes are adjusted for this difference.
Note that calculations in the time domain are immune
from this issue, as the timing sub-system has already
calibrated the TSC against a known wall clock.
AVG_MHz = APERF_delta/measurement_interval
need no adjustment. APERF_delta is in the BCLK domain,
and measurement_interval is in the time domain.
TSC_MHz = TSC_delta/measurement_interval
needs no adjustment -- as we really do want to report
the actual measured TSC delta here, and measurement_interval
is in the accurate time domain.
%Busy = MPERF_delta/TSC_delta
needs adjustment to use TSC_BCLK_DOMAIN_delta.
TSC_BCLK_DOMAIN_delta = TSC_delta * base_hz / tsc_hz
Bzy_MHz = TSC_delta/APERF_delta/MPERF_delta/measurement_interval
need adjustment as above.
No other metrics in turbostat need to be adjusted.
Before:
CPU Avg_MHz %Busy Bzy_MHz TSC_MHz
- 550 24.84 2216 1512
0 2191 98.73 2219 1514
2 0 0.01 2130 1512
1 9 0.43 2016 1512
3 2 0.08 2016 1512
After:
CPU Avg_MHz %Busy Bzy_MHz TSC_MHz
- 550 25.05 2198 1512
0 2190 99.62 2199 1512
2 0 0.01 2152 1512
1 9 0.46 2000 1512
3 2 0.10 2000 1512
Note that in this example, the "Before" Bzy_MHz
was reported as exceeding the 2200 max turbo rate.
Also, even a pinned spin loop would not be reported
as over 99% busy.
Signed-off-by: Len Brown <len.brown@intel.com>
KNL increments APERF and MPERF every 1024 clocks.
This is compliant with the architecture specification,
which requires that only the ratio of APERF/MPERF need be valid.
However, turbostat takes advantage of the fact that these
two MSRs increment every un-halted clock
at the actual and base frequency:
AVG_MHz = APERF_delta/measurement_interval
%Busy = MPERF_delta/TSC_delta
This quirk is needed for these calculations to also work on KNL,
which would otherwise show a value 1024x smaller than expected.
Signed-off-by: Hubert Chrzaniuk <hubert.chrzaniuk@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Staring in Linux-4.3-rc1,
commit 6fb3143b56 ("tools/power turbostat: dump CONFIG_TDP")
touches MSR 0x648, which is not supported on IVB-Xeon.
This results in "turbostat --debug" exiting on those systems:
turbostat: /dev/cpu/2/msr offset 0x648 read failed: Input/output error
Remove IVB-Xeon from the list of machines supporting with that MSR.
Signed-off-by: Len Brown <len.brown@intel.com>
A copy of /proc/kcore containing the kernel text can be made to the
buildid cache. e.g.
perf buildid-cache -v -k /proc/kcore
To workaround objdump limitations, a copy is also made when annotating
against /proc/kcore.
The copying process stops working from libelf about v1.62 onwards (the
problem was found with v1.63).
The cause is that a call to gelf_getphdr() in kcore__add_phdr() fails
because additional validation has been added to gelf_getphdr().
The use of gelf_getphdr() is a misguided attempt to get default
initialization of the Gelf_Phdr structure. That should not be
necessary because every member of the Gelf_Phdr structure is
subsequently assigned. So just remove the call to gelf_getphdr().
Similarly, a call to gelf_getehdr() in gelf_kcore__init() can be
removed also.
Committer notes:
Note to stable@kernel.org, from Adrian in the cover letter for this
patchkit:
The "Fix copying of /proc/kcore" problem goes back to v3.13 if you think
it is important enough for stable.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@kernel.org
Link: http://lkml.kernel.org/r/1443089122-19082-3-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
no_force_psb was dropped as a late change to the kernel driver.
Consequently, remove it from the documentation.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1443089122-19082-2-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We have map_groups__find_by_name() to look at the list of modules that
are in place for a given machine, so use it instead of traversing the
machine dso list, which also includes DSOs for userspace.
When merging the user and kernel DSO lists a bug was introduced where
'perf probe' stopped being able to add probes to modules using its short
name:
# perf probe -m usbnet --add usbnet_start_xmit
usbnet_start_xmit is out of .text, skip it.
Error: Failed to add events.
#
With this fix it works again:
# perf probe -m usbnet --add usbnet_start_xmit
Added new event:
probe:usbnet_start_xmit (on usbnet_start_xmit in usbnet)
You can now use it in all perf tools, such as:
perf record -e probe:usbnet_start_xmit -aR sleep 1
#
Reported-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Fixes: 3d39ac5386 ("perf machine: No need to have two DSOs lists")
Link: http://lkml.kernel.org/r/20150924015008.GE1897@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
User visible:
- Fix a segfault in 'perf probe' when removing uprobe events (Masami Hiramatsu)
- Synthesize COMM event for workloads started from the command line in 'perf
record' so that we can have the pid->comm mapping before we get the real
PERF_RECORD_COMM switching from perf to the workload (Namhyung Kim)
- Fix build tools/vm/ due to removal of tools/lib/api/fs/debugfs.h
(Arnaldo Carvalho de Melo)
Developer stuff:
- Fix the make tarball targets by including the recently added err.h header in
the perf MANIFEST file (Jiri Olsa)
- Don't assume that the event parser returns a non empty evlist (Wang Nan)
- Add way to disambiguate feature detection state files, needed to use
tools/build feature detection for multiple components in a single O= output
dir, which will be the case with tools/perf/ and tools/lib/bpf/
(Arnaldo Carvalho de Melo)
- Fixup FEATURE_{TESTS,DISPLAY} inversion in tools/lib/bpf/ (Arnaldo Carvalho de Melo)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=6DJ/
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
User visible changes:
- Fix a segfault in 'perf probe' when removing uprobe events. (Masami Hiramatsu)
- Synthesize COMM event for workloads started from the command line in 'perf
record' so that we can have the pid->comm mapping before we get the real
PERF_RECORD_COMM switching from perf to the workload. (Namhyung Kim)
- Fix build tools/vm/ due to removal of tools/lib/api/fs/debugfs.h.
(Arnaldo Carvalho de Melo)
Infrastructure changes:
- Fix the make tarball targets by including the recently added err.h header in
the perf MANIFEST file. (Jiri Olsa)
- Don't assume that the event parser returns a non empty evlist. (Wang Nan)
- Add way to disambiguate feature detection state files, needed to use
tools/build feature detection for multiple components in a single O= output
dir, which will be the case with tools/perf/ and tools/lib/bpf/.
(Arnaldo Carvalho de Melo)
- Fixup FEATURE_{TESTS,DISPLAY} inversion in tools/lib/bpf/. (Arnaldo Carvalho de Melo)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When perf creates a new child to profile, the events are enabled on
exec(). And in this case, it doesn't synthesize any event for the
child since they'll be generated during exec(). But there's an window
between the enabling and the event generation.
It used to be overcome since samples are only in kernel (so we always
have the map) and the comm is overridden by a later COMM event.
However it won't work if events are processed and displayed before the
COMM event overrides like in 'perf script'. This leads to those early
samples (like native_write_msr_safe) not having a comm but pid (like
':15328').
So it needs to synthesize COMM event for the child explicitly before
enabling so that it can have a correct comm. But at this time, the
comm will be "perf" since it's not exec-ed yet.
Committer note:
Before this patch:
# perf record usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.017 MB perf.data (7 samples) ]
# perf script --show-task-events
:4429 4429 27909.079372: 1 cycles: ffffffff8105f45a native_write_msr_safe (/lib/modules/4.
:4429 4429 27909.079375: 1 cycles: ffffffff8105f45a native_write_msr_safe (/lib/modules/4.
:4429 4429 27909.079376: 10 cycles: ffffffff8105f45a native_write_msr_safe (/lib/modules/4.
:4429 4429 27909.079377: 223 cycles: ffffffff8105f45a native_write_msr_safe (/lib/modules/4.
:4429 4429 27909.079378: 6571 cycles: ffffffff8105f45a native_write_msr_safe (/lib/modules/4.
usleep 4429 27909.079380: PERF_RECORD_COMM exec: usleep:4429/4429
usleep 4429 27909.079381: 185403 cycles: ffffffff810a72d3 flush_signal_handlers (/lib/modules/4.
usleep 4429 27909.079444: 2241110 cycles: 7fc575355be3 _dl_start (/usr/lib64/ld-2.20.so)
usleep 4429 27909.079875: PERF_RECORD_EXIT(4429:4429):(4429:4429)
After:
# perf record usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.017 MB perf.data (7 samples) ]
# perf script --show-task
perf 0 0.000000: PERF_RECORD_COMM: perf:8446/8446
perf 8446 30154.038944: 1 cycles: ffffffff8105f45a native_write_msr_safe (/lib/modules/4.
perf 8446 30154.038948: 1 cycles: ffffffff8105f45a native_write_msr_safe (/lib/modules/4.
perf 8446 30154.038949: 9 cycles: ffffffff8105f45a native_write_msr_safe (/lib/modules/4.
perf 8446 30154.038950: 230 cycles: ffffffff8105f45a native_write_msr_safe (/lib/modules/4.
perf 8446 30154.038951: 6772 cycles: ffffffff8105f45a native_write_msr_safe (/lib/modules/4.
usleep 8446 30154.038952: PERF_RECORD_COMM exec: usleep:8446/8446
usleep 8446 30154.038954: 196923 cycles: ffffffff81766440 _raw_spin_lock (/lib/modules/4.3.0-rc1
usleep 8446 30154.039021: 2292130 cycles: 7f609a173dc4 memcpy (/usr/lib64/ld-2.20.so)
usleep 8446 30154.039349: PERF_RECORD_EXIT(8446:8446):(8446:8446)
#
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1442881495-2928-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There were some changes in how this debugfs mounting helper is
implemented/exported and we forgot to check if there were other users
besides perf, fix it.
Need to do a make -C tools/ everytime we do changes to
tools/{lib,include} and other places where we're moving things from
tools/perf/ to be used by other tools/ living code.
Fixed:
$ make -C tools/vm
make: Entering directory '/home/git/linux/tools/vm'
make -C ../lib/api
make[1]: Entering directory '/home/git/linux/tools/lib/api'
CC fd/array.o
LD fd/libapi-in.o
CC fs/fs.o
CC fs/tracing_path.o
LD fs/libapi-in.o
CC cpu.o
LD libapi-in.o
AR libapi.a
make[1]: Leaving directory '/home/git/linux/tools/lib/api'
gcc -Wall -Wextra -I../lib/ -o page-types page-types.c ../lib/api/libapi.a
make: Leaving directory '/home/git/linux/tools/vm'
$
Reported-by: Vinson Lee <vlee@twopensource.com>
Tested-by: Vinson Lee <vlee@twopensource.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Raphael Beamonte <raphael.beamonte@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: David Ahern <dsahern@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Fixes: 60a1133a5b ("tools lib api fs: Remove debugfs, tracefs and findfs objects")
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We don't need to specify an explicit rule in the Makefile, the implicit
one will do the same. The "__EXPORTED_HEADERS__" define is not needed,
because we build the test against the installed kernel headers, not the
in-tree kernel headers. Re-use "$(TEST_PROGS)" in the clean target
rather than spelling the executable name twice. Include <unistd.h>
rather than the rather specific <asm-generic/unistd.h>. Include
<syscall.h> rather than <sys/syscall.h>. In both cases, the former
header is located in a standard location and includes the latter.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Cc: Pranith Kumar <bobby.prani@gmail.com>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
On ppc big endian this check fails, the mutex doesn't necessarily need
to be identical for all pages after pthread_mutex_lock/unlock cycles.
The count verification (outside of the pthread_mutex_t structure)
suffices and that is retained.
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Thierry Reding <treding@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This will report the error in the exit code, in addition of the fprintf.
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Thierry Reding <treding@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Keep a non-zero placeholder after the count, for the my_bcmp comparison
of the page against the zeropage. The lockless increment between 255 to
256 against a lockless my_bcmp could otherwise return false positives on
ppc32le.
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Tested-by: Michael Ellerman <mpe@ellerman.id.au>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Thierry Reding <treding@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If __NR_userfaultfd is not yet defined by the arch, warn but still build
and run the userfaultfd selftest successfully.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Thierry Reding <treding@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Depend on "make headers_install" to create proper headers to include and
provide syscall numbers.
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Thierry Reding <treding@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add the usr/include subdirectory of the top-level tree to the include
path, and make sure to include headers without relative paths to make
sure the sanitized headers get picked up. Otherwise the compiler will
not be able to find the linux/compiler.h header included by the non-
sanitized include/uapi/linux/userfaultfd.h.
While at it, make sure to only hardcode the syscall numbers on x86 and
PowerPC if they haven't been properly picked up from the headers.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Instead of calling strlen on every iteration of the for loop, just call it
once and cache the result in a temporary local variable which will be used
in the for loop instead.
Signed-off-by: Eric Curtin <ericcurtin17@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When a trace recorded on a 32-bit device is processed with a 64-bit
binary, the higher 32-bits of the address need to ignored.
The lack of this results in the output of the 64-bit pointer
value to the trace as the 32-bit address lookup fails in find_printk().
Before:
burn-1778 [003] 548.600305: bputs: 0xc0046db2s: 2cec5c058d98c
After:
burn-1778 [003] 548.600305: bputs: 0xc0046db2s: RT throttling activated
The problem occurs in PRINT_FIELD when the field is recognized as a
pointer to a string (of the type const char *)
Heterogeneous architectures cases below can arise and should be handled:
* Traces recorded using 32-bit addresses processed on a 64-bit machine
* Traces recorded using 64-bit addresses processed on a 32-bit machine
Reported-by: Juri Lelli <juri.lelli@arm.com>
Signed-off-by: Kapileshwar Singh <kapileshwar.singh@arm.com>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Javi Merino <javi.merino@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1442928123-13824-1-git-send-email-kapileshwar.singh@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Otherwise the tarpkg is incomplete (tarpkg tests fails).
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 01ca9fd41d ("tools: Add err.h with ERR_PTR PTR_ERR interface")
Link: http://lkml.kernel.org/r/1442846143-8556-1-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When building tools/lib/bpf as part of the tools/perf/ build process,
which will happend when we introduce a patch wiring that up, we end up
stomping on the feature detection caching mechanism, that uses a file in
the output directory (O=) that is shared by libbpf and perf to check if
something changed from one build to another that requires redoing the
feature detection process.
By using the recently introduced FEATURE_USER tools/build/ knob, we can
avoid that:
Before, every make invokation would run the feature detection:
$ make O=/tmp/build/perf -C tools/perf
make: Entering directory '/home/git/linux/tools/perf'
Auto-detecting system features:
... dwarf: [ on ]
... glibc: [ on ]
<SNIP>
... get_cpuid: [ on ]
... bpf: [ on ]
GEN perf-archive
GEN perf-with-kcore
Auto-detecting system features:
... libelf: [ on ]
... bpf: [ on ]
<SNIP>
After:
$ make O=/tmp/build/perf -C tools/perf
make: Entering directory '/home/git/linux/tools/perf'
BUILD: Doing 'make -j4' parallel build
make: Leaving directory '/home/git/linux/tools/perf'
$
Because we now have two different feature detection state files:
$ ls -la /tmp/build/perf/FEATURE-DUMP*
-rw-rw-r--. 1 acme acme 338 Sep 21 17:25 /tmp/build/perf/FEATURE-DUMP
-rw-rw-r--. 1 acme acme 33 Sep 21 17:25 /tmp/build/perf/FEATURE-DUMP.libbpf
$
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: pi3orama@163.com
Fixes: 1b76c13e4b ("bpf tools: Introduce 'bpf' library and add bpf feature check")
Link: http://lkml.kernel.org/n/tip-s6ev9wfqy7pvvs58emys2g90@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We will use the tools/build/ autodetection in the eBPF patchkit
and it is currently sharing the output directory with perf, that
also uses the feature detection logic.
As we keep state in the output directory, so that we can avoid running
all the tests again, we need to have different filenames for the files
used in this state, allow doing that via the FEATURE_USER variable, to
be set alongside the existing FEATURE_{TEST,DISPLAY} variables.
v2: Fix comment describing the FEATURE_DUMP filename to make sure where
it is created, precisely at $(OUTPUT)FEATURE-DUMP$(FEATURE_USER).
Pointed out by Jiri.
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/n/tip-fdbev0vrn3x6idqc3ajbnvcb@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When libbpf was introduced it wrongly asked for the "libelf" and "bpf"
feature tests to be performed (via FEATURE_TESTS), while asking that
"libbpf", "libelf-mmap", "libelf-getphdrnum" and "bpf" to have the
result of its respective tests to be displayed (via FEATURE_DISPLAY).
Due to another recently bug fixed in the tools/build/ infrastructure
("tools build: Fixup feature detection display function name") the
results for the entries in the FEATURE_DISPLAY, for this case, were
appearing as all succeeding, when two of them (the ones only on the
DISPLAY) were not even being performed.
Before:
$ make -C tools/lib/bpf/
make: Entering directory '/home/git/linux/tools/lib/bpf'
Auto-detecting system features:
... libelf: [ on ]
... libelf-getphdrnum: [ OFF ]
... libelf-mmap: [ OFF ]
... bpf: [ on ]
<SNIP>
After, with FEATURE_TESTS == FEATURE_DISPLAY:
Auto-detecting system features:
... libelf: [ on ]
... libelf-getphdrnum: [ on ]
... libelf-mmap: [ on ]
... bpf: [ on ]
<SNIP>
I just inverted, so that it tests the four features but displays just
the libelf and mmap ones, to make it more compact. So it becomes:
$ make -C tools/lib/bpf/
make: Entering directory '/home/git/linux/tools/lib/bpf'
Auto-detecting system features:
... libelf: [ on ]
... bpf: [ on ]
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: pi3orama@163.com
Fixes: 1b76c13e4b ("bpf tools: Introduce 'bpf' library and add bpf feature check")
Link: http://lkml.kernel.org/n/tip-y4bd59e6j9rzzojiyeqrg2jq@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cut'n'paste mistake, it should eval the name of the function
defined right next to it, in the next line, fix it.
Before:
$ make -C tools/lib/bpf/
make: Entering directory '/home/git/linux/tools/lib/bpf'
Auto-detecting system features:
... libelf: [ on ]
... libelf-getphdrnum: [ on ]
... libelf-mmap: [ on ]
... bpf: [ on ]
<SNIP>
After:
$ make -C tools/lib/bpf/
make: Entering directory '/home/git/linux/tools/lib/bpf'
Auto-detecting system features:
... libelf: [ on ]
... libelf-getphdrnum: [ OFF ]
... libelf-mmap: [ OFF ]
... bpf: [ on ]
<SNIP>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: pi3orama@163.com
Fixes: 58d4f00ff1 ("perf build: Fix feature_check name clash")
Link: http://lkml.kernel.org/n/tip-dzu1c4sruukgfq5d5b1c4r30@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Don't blindly retrieve and use a last element in the lists returned by
parse_events__scanner(), as it may have collected no entries, i.e.
return an empty list.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1441523623-152703-2-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix a segfault bug and a small mistake in perf probe -d.
Since the "ulist" in perf_del_probe_events is never initialized,
strlist__add(ulist, *) always causes a segfault when removing
uprobe events by perf probe -d.
Also, the "str" local variable is never released if fail to
allocate the "klist". This fixes it too.
This has been introduced by the commit e607f1426b ("perf probe:
Print deleted events in cmd_probe()").
Reported-by: Milian Wolff <milian.wolff@kdab.com>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20150916125241.4446.44805.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull s390 fixes from Martin Schwidefsky:
"A couple of system call updates. The two new system calls userfaultfd
and membarrier have been added, as well as the 17 direct calls for the
multiplexed socket system calls.
In addition the system call compat wrappers have been flagged as
notrace functions and a few wrappers could be removed.
And bug fixes for the vector register handling, cpu_mf, suspend/resume,
compat signals, SMT cputime accounting and the zfcp dumper"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390: wire up separate socketcalls system calls
s390/compat: remove superfluous compat wrappers
s390/compat: do not trace compat wrapper functions
s390/s390x: allocate sys_membarrier system call number
s390/configs//zfcpdump_defconfig: Remove CONFIG_MEMSTICK
s390: wire up userfaultfd system call
s390/vtime: correct scaled cputime for SMT
s390/cpum_cf: Corrected return code for unauthorized counter sets
s390/compat: correct uc_sigmask of the compat signal frame
s390: fix floating point register corruption
s390/hibernate: fix save and restore of vector registers
This fixes the virtio-test tool, and improves
the error handling for virtio-ccw.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJV+TrqAAoJECgfDbjSjVRpsBwH/0CqspPuCPR/QMHmw0w66lQh
I2kYdkvJy/nAXtY+6JHhVgxbPzJeZ2im5BK3+8pIUoMXSHRn1QMn+/a0WCA0GvC2
iXSnIGFs/gMK80k2ULrf9HmopnxVtEZUY+6/DQXYD3lRDi25k8Xbs5x4ygPwGywD
iV5/JPNjJvWLQQ4uDnlp6SoPfxa/P8lbpdZlIJHKAM0pTuWeU4rgncMo8SvHjVEL
zyrg3ofDq3V0objwLOnLk0Z8i6uwEQrfZzprvDcZglK58B+jWm2cuAiaGoLHgwN6
xkSQEWMKeV66FTuqzI+bCsvWf04+EkGbxk75RLx3GfT2LJg59XgxqEpN7yOCKFg=
=O2nr
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio fixes and cleanups from Michael Tsirkin:
"This fixes the virtio-test tool, and improves the error handling for
virtio-ccw"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
virtio/s390: handle failures of READ_VQ_CONF ccw
tools/virtio: propagate V=X to kernel build
vhost: move features to core
tools/virtio: fix build after 4.2 changes
If a session contains no events, we can get stuck in an infinite loop in
__perf_session__process_events, with a non-zero file_size and data_offset, but
a zero data_size.
In this case, we can mmap the entirety of the file (consisting of the file and
attribute headers), and fetch_mmaped_event will correctly refuse to read any
(unmapped and non-existent) event headers. This causes
__perf_session__process_events to unmap the file and retry with the exact same
parameters, getting stuck in an infinite loop.
This has been observed to result in an exit-time hang when counting
rare/unschedulable events with perf record, and can be triggered artificially
with the script below:
----
#!/bin/sh
printf "REPRO: launching perf\n";
./perf record -e software/config=9/ sleep 1 &
PERF_PID=$!;
sleep 0.002;
kill -2 $PERF_PID;
printf "REPRO: waiting for perf (%d) to exit...\n" "$PERF_PID";
wait $PERF_PID;
printf "REPRO: perf exited\n";
----
To avoid this, have __perf_session__process_events bail out early when
the file has no data (i.e. it has no events).
Commiter note:
I only managed to reproduce this when setting
/proc/sys/kernel/kptr_restrict to '1' and changing the code to
purposefully not process any samples and no synthesized samples, i.e.
kptr_restrict prevents 'record' from synthesizing the kernel mmaps for
vmlinux + modules and since it is a workload started from perf, we don't
synthesize mmap/comm records for existing threads.
Adrian Hunter managed to reproduce it in his environment tho.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Tested-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1442423929-12253-1-git-send-email-mark.rutland@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This new test checks that all x86 registers are preserved across
32-bit syscalls. It tests syscalls through VDSO (if available)
and through INT 0x80, normally and under ptrace.
If kernel is a 64-bit one, high registers (r8..r15) are poisoned
before the syscall is called and are checked afterwards.
They must be either preserved, or cleared to zero (but r11 is
special); r12..15 must be preserved for INT 0x80.
EFLAGS is checked for changes too, but change there is not
considered to be a bug (paravirt kernels do not preserve
arithmetic flags).
Run-tested on 64-bit kernel:
$ ./test_syscall_vdso_32
[RUN] Executing 6-argument 32-bit syscall via VDSO
[OK] Arguments are preserved across syscall
[NOTE] R11 has changed:0000000000200ed7 - assuming clobbered by
SYSRET insn [OK] R8..R15 did not leak kernel data
[RUN] Executing 6-argument 32-bit syscall via INT 80
[OK] Arguments are preserved across syscall
[OK] R8..R15 did not leak kernel data
[RUN] Running tests under ptrace
[RUN] Executing 6-argument 32-bit syscall via VDSO
[OK] Arguments are preserved across syscall
[OK] R8..R15 did not leak kernel data
[RUN] Executing 6-argument 32-bit syscall via INT 80
[OK] Arguments are preserved across syscall
[OK] R8..R15 did not leak kernel data
On 32-bit paravirt kernel:
$ ./test_syscall_vdso_32
[NOTE] Not a 64-bit kernel, won't test R8..R15 leaks
[RUN] Executing 6-argument 32-bit syscall via VDSO
[WARN] Flags before=0000000000200ed7 id 0 00 o d i s z 0 a 0 p 1 c
[WARN] Flags after=0000000000200246 id 0 00 i z 0 0 p 1
[WARN] Flags change=0000000000000c91 0 00 o d s 0 a 0 0 c
[OK] Arguments are preserved across syscall
[RUN] Executing 6-argument 32-bit syscall via INT 80
[OK] Arguments are preserved across syscall
[RUN] Running tests under ptrace
[RUN] Executing 6-argument 32-bit syscall via VDSO
[OK] Arguments are preserved across syscall
[RUN] Executing 6-argument 32-bit syscall via INT 80
[OK] Arguments are preserved across syscall
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
Acked-by: Andy Lutomirski <luto@amacapital.net>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Drewry <wad@chromium.org>
Cc: linux-kernel@vger.kernel.org
Link: http://lkml.kernel.org/r/1442427809-2027-1-git-send-email-dvlasenk@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
User visible:
- When handling perf_event_open() returning EBUSY and not being able to opendir
the procfs mount point we would tell the user that the oprofile daemon was
found by returning -1 on as the return for a bool function, oops, fix it,
found with Coccinelle (Peter Senna Tschudin).
- Fix per-pkg event reporting bug in 'perf stat' (Stephane Eranian)
Developer visible:
- Fix missing prototype for function provided when it isn't present in the
libelf present, fixing the build on RHEL/CentOS 5.1 systems, for instance
(Arnaldo Carvalho de Melo)
- Detect if the gcc and libnuma have the features needed to avoid requiring
the use of NO_LIBNUMA and/or NO_AUXTRACE to build on older systems
(Arnaldo Carvalho de Melo)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=k6ND
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/urgent fixes from Arnaldo Carvalho de Melo:
User visible changes:
- When handling perf_event_open() returning EBUSY and not being able to opendir
the procfs mount point we would tell the user that the oprofile daemon was
found by returning -1 on as the return for a bool function, oops, fix it,
found with Coccinelle. (Peter Senna Tschudin).
- Fix per-pkg event reporting bug in 'perf stat'. (Stephane Eranian)
Developer visible changes:
- Fix missing prototype for function provided when it isn't present in the
libelf present, fixing the build on RHEL/CentOS 5.1 systems, for instance.
(Arnaldo Carvalho de Melo)
- Detect if the gcc and libnuma have the features needed to avoid requiring
the use of NO_LIBNUMA and/or NO_AUXTRACE to build on older systems.
(Arnaldo Carvalho de Melo)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Returning a negative value for a boolean function seem to have the
undesired effect of returning true. Replace -1 by false in a
bool-returning function.
The diff of the .s file before and after the change (for x86_64):
3907c3907
< movl $1, %ebx
---
> xorl %ebx, %ebx
while if -1 is replaced by true, the diff is empty.
This issue was found by the following Coccinelle semantic patch:
<smpl>
@@
identifier f;
constant C;
typedef bool;
@@
bool f (...){
<+...
* return -C;
...+>
}
</smpl>
Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Matt Fleming <matt.fleming@intel.com>
Cc: Milos Vyletel <milos@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1442484533-19742-1-git-send-email-peter.senna@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull x86 fixes from Ingo Molnar:
- misc fixes all around the map
- block non-root vm86(old) if mmap_min_addr != 0
- two small debuggability improvements
- removal of obsolete paravirt op
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/platform: Fix Geode LX timekeeping in the generic x86 build
x86/apic: Serialize LVTT and TSC_DEADLINE writes
x86/ioapic: Force affinity setting in setup_ioapic_dest()
x86/paravirt: Remove the unused pv_time_ops::get_tsc_khz method
x86/ldt: Fix small LDT allocation for Xen
x86/vm86: Fix the misleading CONFIG_VM86 Kconfig help text
x86/cpu: Print family/model/stepping in hex
x86/vm86: Block non-root vm86(old) if mmap_min_addr != 0
x86/alternatives: Make optimize_nops() interrupt safe and synced
x86/mm/srat: Print non-volatile flag in SRAT
x86/cpufeatures: Enable cpuid for Intel SHA extensions
Pull perf fixes from Ingo MOlnar:
"Mostly tooling fixes, but also two x86 PMU driver fixes"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf tests: Fix software clock events test setting maps
perf tests: Fix task exit test setting maps
perf evlist: Fix create_syswide_maps() not propagating maps
perf evlist: Fix add() not propagating maps
perf evlist: Factor out a function to propagate maps for a single evsel
perf evlist: Make create_maps() use set_maps()
perf evlist: Make set_maps() more resilient
perf evsel: Add own_cpus member
perf evlist: Fix missing thread_map__put in propagate_maps()
perf evlist: Fix splice_list_tail() not setting evlist
perf evlist: Add has_user_cpus member
perf evlist: Remove redundant validation from propagate_maps()
perf evlist: Simplify set_maps() logic
perf evlist: Simplify propagate_maps() logic
perf top: Fix segfault pressing -> with no hist entries
perf header: Fixup reading of HEADER_NRCPUS feature
perf/x86/intel: Fix constraint access
perf/x86/intel/bts: Set event->hw.itrace_started in pmu::start to match the new logic
perf tools: Fix use of wrong event when processing exit events
perf tools: Fix parse_events_add_pmu caller
The auxtrace code needed by Intel PT uses the __get_cpuid() gcc builtin,
that is not present in old systems, breaking the build.
Add a test to check for that builtin and disable AUXTRACE in those
systems.
[acme@rhel5 linux]$ make NO_LIBPERL=1 -C tools/perf O=/tmp/build/perf install-bin
make: Entering directory `/home/acme/git/linux/tools/perf'
BUILD: Doing 'make -j2' parallel build
Auto-detecting system features:
<SNIP>
... lzma: [ on ]
... get_cpuid: [ OFF ]
<SNIP>
config/Makefile:630: Your gcc lacks the __get_cpuid() builtin, disables support for auxtrace/Intel PT, please install a newer gcc
MKDIR /tmp/build/perf/util/
<SNIP>
This fixes the build on old systems such as RHEL/CentOS 5.11.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: "Naveen N. Rao" <naveen.n.rao@linux.vnet.ibm.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Victor Kamensky <victor.kamensky@linaro.org>
Cc: Vinson Lee <vlee@twopensource.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-d4puslul0jltoodzpx9r4sje@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The existing numa test checks only if numa.h and numa_available() are
present, but that can be satisfied with an old libnuma that is not
enough for the 'perf bench numa' entry, so add a test to check for that:
[acme@rhel5 linux]$ make NO_AUXTRACE=1 NO_LIBPERL=1 -C tools/perf O=/tmp/build/perf install-bin
make: Entering directory `/home/acme/git/linux/tools/perf'
BUILD: Doing 'make -j2' parallel build
Auto-detecting system features:
... libelf: [ on ]
... libnuma: [ on ]
... numa_num_possible_cpus: [ OFF ]
... libperl: [ on ]
<SNIP>
config/Makefile:577: Old numa library found, disables 'perf bench numa mem' benchmark, please install numactl-devel/libnuma-devel/libnuma-dev >= 2.0.8
INSTALL binaries
<SNIP>
This fixes the build on old systems such as RHEL/CentOS 5.11.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: "Naveen N. Rao" <naveen.n.rao@linux.vnet.ibm.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Victor Kamensky <victor.kamensky@linaro.org>
Cc: Vinson Lee <vlee@twopensource.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-zqriqkezppi2de2iyjin1tnc@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This reverts commit f785f23576.
We have a test to check if elf_getphdrnum() is present, so, if it fails,
we'll get:
[acme@rhel5 linux]$ cat /tmp/build/perf/feature/test-libelf-getphdrnum.make.output
cc1: warnings being treated as errors
test-libelf-getphdrnum.c: In function ‘main’:
test-libelf-getphdrnum.c:7: warning: implicit declaration of function ‘elf_getphdrnum’
[acme@rhel5 linux]$
And this block will not be compiled:
#ifndef HAVE_ELF_GETPHDRNUM_SUPPORT
static int elf_getphdrnum(Elf *elf, size_t *dst)
...
#endif
So, if elf_getphdrnum() is being defined somewhere, there is a problem
with the test that is not detecting that function, go fix it.
Reported-by: Vinson Lee <vlee@twopensource.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: "Naveen N. Rao" <naveen.n.rao@linux.vnet.ibm.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Victor Kamensky <victor.kamensky@linaro.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-qn459fal6acvcvm50i8zxx9k@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Per-pkg events need to be captured once per processor socket. The code
in check_per_pkg() ensures only one value per processor package is used.
However there is a problem with this function in case the first CPU of
the package does not measure anything for the per-pkg event, but other
CPUs do.
Consider the following:
$ create cgroup FOO; echo $$ >FOO/tasks; taskset -c 1 noploop &
$ perf stat -a -I 1000 -e intel_cqm/llc_occupancy/ -G FOO sleep 100
1.00000 <not counted> Bytes intel_cqm/llc_occupancy/ FOO
The reason for this is that CPU0 in the cgroup has nothing running on it.
Yet check_per_plg() will mark socket0 as processed and no other event
value will be considered for the socket.
This patch fixes the problem by having check_per_pkg() only consider
events which actually ran.
Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1441286620-10117-1-git-send-email-eranian@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The test titled "Test software clock events have valid period values"
was setting cpu/thread maps directly. Make it use the proper function
perf_evlist__set_maps() especially now that it also propagates the maps.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Link: http://lkml.kernel.org/r/1441699142-18905-15-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The test titled "Test number of exit event of a simple workload" was
setting cpu/thread maps directly. Make it use the proper function
perf_evlist__set_maps() especially now that it also propagates the maps.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Link: http://lkml.kernel.org/r/1441699142-18905-14-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix it by making it call perf_evlist__set_maps() instead of setting the
maps itself.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Link: http://lkml.kernel.org/r/1441699142-18905-13-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If evsels are added after maps are created, then they won't have any
maps propagated to them. Fix that.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Link: http://lkml.kernel.org/r/1441699142-18905-12-git-send-email-adrian.hunter@intel.com
[ Moved the moving of propagate_maps() to the patch before, so that this
one does _just_ the one lile fix calling in add()]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Subsequent fixes will need a function that just propagates maps for a
single evsel so factor it out.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Link: http://lkml.kernel.org/r/1441699142-18905-11-git-send-email-adrian.hunter@intel.com
[ Moved them to before perf_evlist__add() to avoid having to move it in the next patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since there is a function to set maps, perf_evlist__create_maps() should
use it.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Link: http://lkml.kernel.org/r/1441699142-18905-10-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Make perf_evlist__set_maps() more resilient by allowing for the
possibility that one or another of the maps isn't being changed and
therefore should not be "put".
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Link: http://lkml.kernel.org/r/1441699142-18905-9-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf_evlist__propagate_maps() cannot easily tell if an evsel has its own
cpu map. To make that simpler, keep a copy of the PMU cpu map and
adjust the propagation logic accordingly.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Link: http://lkml.kernel.org/r/1441699142-18905-8-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf_evlist__propagate_maps() incorrectly assumes evsel->threads is NULL
before reassigning it, but it won't be NULL when perf_evlist__set_maps()
is used to set different (or NULL) maps. Thus thread_map__put must be
used, which works even if evsel->threads is NULL.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Link: http://lkml.kernel.org/r/1441699142-18905-7-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit d49e469507 ("perf evsel: Add a backpointer to the evlist a
evsel is in") updated perf_evlist__add() but not
perf_evlist__splice_list_tail().
This illustrates that it is better if perf_evlist__splice_list_tail()
calls perf_evlist__add() instead of duplicating the logic, so do that.
This will also simplify a subsequent fix for propagating maps.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Link: http://lkml.kernel.org/r/1441699142-18905-6-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Subsequent patches will need to call perf_evlist__propagate_maps without
reference to a "target". Add evlist->has_user_cpus to record whether
the user has specified which cpus to target (and therefore whether that
list of cpus should override the default settings for a selected event
i.e. the cpu maps should be propagated)
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Link: http://lkml.kernel.org/r/1441699142-18905-5-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The validation checks that the values that were just assigned, got
assigned i.e. the error can't ever happen. Subsequent patches will call
this code in places where errors are not being returned. Changing those
code paths to return this non-existent error is counter-productive, so
just remove it.
That in turn results in perf_evlist__set_maps not needing to return an
error, but callers aren't checking it either, so remove that too.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Link: http://lkml.kernel.org/r/1441699142-18905-4-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Don't need to check for NULL when "putting" evlist->maps and
evlist->threads because the "put" functions already do that.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Link: http://lkml.kernel.org/r/1441699142-18905-3-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If evsel->cpus is to be reassigned then the current value must be "put",
which works even if it is NULL. Simplify the current logic by moving
the "put" next to the assignment.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Link: http://lkml.kernel.org/r/1441699142-18905-2-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
regs_query_register_offset() is a helper function which converts
register name like "%rax" to offset of a register in 'struct pt_regs',
which is required by BPF prologue generator. Since the function is
identical, try to reuse the code in arch/x86/kernel/ptrace.c.
Comment inside dwarf-regs.c list the differences between this
implementation and kernel code.
get_arch_regstr() switches to regoffset_table and the old string table
is dropped.
Signed-off-by: He Kuang <hekuang@huawei.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1441523623-152703-20-git-send-email-wangnan0@huawei.com
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
regs_query_register_offset() is a helper function which converts
register name like "%rax" to offset of a register in 'struct pt_regs',
which is required by BPF prologue generator.
PERF_HAVE_ARCH_REGS_QUERY_REGISTER_OFFSET indicates an architecture
supports converting name of a register to its offset in 'struct
pt_regs'.
HAVE_ARCH_REGS_QUERY_REGISTER_OFFSET is introduced as the corresponding
CFLAGS of PERF_HAVE_ARCH_REGS_QUERY_REGISTER_OFFSET.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1441523623-152703-19-git-send-email-wangnan0@huawei.com
Signed-off-by: He Kuang <hekuang@huawei.com>
[ Extracted from eBPF patches ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Enhancing parsing events tracepoint error output. Adding
more verbose output when the tracepoint is not found or
the tracing event path cannot be access.
$ sudo perf record -e sched:sched_krava ls
event syntax error: 'sched:sched_krava'
\___ unknown tracepoint
Error: File /sys/kernel/debug/tracing//tracing/events/sched/sched_krava not found.
Hint: Perhaps this kernel misses some CONFIG_ setting to enable this feature?.
Run 'perf list' for a list of valid events
...
$ perf record -e sched:sched_krava ls
event syntax error: 'sched:sched_krava'
\___ can't access trace events
Error: No permissions to read /sys/kernel/debug/tracing//tracing/events/sched/sched_krava
Hint: Try 'sudo mount -o remount,mode=755 /sys/kernel/debug'
Run 'perf list' for a list of valid events
...
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Raphael Beamonte <raphael.beamonte@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1441615087-13886-6-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Propagate error info from tp_format via ERR_PTR to get it all the way
down to the parse-event.c tracepoint adding routines. Following
functions now return pointer with encoded error:
- tp_format
- trace_event__tp_format
- perf_evsel__newtp_idx
- perf_evsel__newtp
This affects several other places in perf, that cannot use pointer check
anymore, but must utilize the err.h interface, when getting error
information from above functions list.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Raphael Beamonte <raphael.beamonte@gmail.com>
Link: http://lkml.kernel.org/r/1441615087-13886-5-git-send-email-jolsa@kernel.org
[ Add two missing ERR_PTR() and one IS_ERR() ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pass 'struct parse_events_error *error' to the parse-event.c tracepoint
adding path. It will be filled with error data in following patches.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Reviewed-by: Raphael Beamonte <raphael.beamonte@gmail.com>
Reviewed-by: Matt Fleming <matt@codeblueprint.co.uk>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1441615087-13886-4-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding part of the kernel's <linux/err.h> interface:
inline void * __must_check ERR_PTR(long error);
inline long __must_check PTR_ERR(__force const void *ptr);
inline bool __must_check IS_ERR(__force const void *ptr);
It will be used to propagate error through pointers in following
patches.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Reviewed-by: Raphael Beamonte <raphael.beamonte@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1441615087-13886-2-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The init/exit_symbols_maps() functions are to setup and cleanup
necessary info for probe events. But they need to be called from out of
the probe code now, so this patch exports them.
However the names are too generic, so change them to have 'probe'. :)
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1441852026-28974-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The cleanup_perf_probe_events() frees all resources related to a perf
probe event. However it only freed resources in trace probe events, not
perf probe events. So call clear_perf_probe_event() too.
Reported-by: Wang Nan <wangnan0@huawei.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1441852026-28974-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
With the previous patch, the installation method change from install
to rsync. There is no need to create subdir during test, the
default EMIT_TESTS is enough.
This patch essentially revert commit 84cbd9e4 ("selftests/exec: do not
install subdir as it is already created").
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Bamvor Jian Zhang <bamvor.zhangjian@linaro.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
The command of install could not handle the special files in exec
testcases, change the default rule to rsync to fix this.
The installation is unchanged after this commit.
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Bamvor Jian Zhang <bamvor.zhangjian@linaro.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Use make's implict rule for building simple C programs.
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Bamvor Jian Zhang <bamvor.zhangjian@linaro.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Change from = to += in order to allows the user to pass whatever
CFLAGS they wish(E.g. pass the proper headers and librareis
(popt.h and libpopt.so) in cross-compiling)
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Bamvor Jian Zhang <bamvor.zhangjian@linaro.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Commit 2bf9e0ab08 ("locking/static_keys: Provide a selftest")
renamed jump_label directory to static_keys and failed to update
the Makefile, causing the selftests build to fail.
This commit fixes it by updating the Makefile with the new name
and also moves the entry into the correct position to keep the
list alphabetically sorted.
Fixes: 2bf9e0ab08 ("locking/static_keys: Provide a selftest")
Signed-off-by: Bamvor Jian Zhang <bamvor.zhangjian@linaro.org>
Acked-by: Shuah Khan <shuahkh@osg.samsung.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
This adds support for s390 to the seccomp selftests. Some improvements
were made to enhance the accuracy of failure reporting, and additional
tests were added to validate assumptions about the currently traced
syscall. Also adds early asserts for running on older kernels to avoid
noise when the seccomp syscall is not implemented.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Not all shells define a variable UID. This is a bash and zsh feature only.
In other shells, the UID variable is not defined, so here test command
expands to [ != 0 ] which is a syntax error.
Without this patch:
root@HGH1000007090:/opt/work/linux/tools/testing/selftests/zram# sh zram.sh
zram.sh: 8: [: !=: unexpected operator
zram.sh : No zram.ko module or /dev/zram0 device file not found
zram.sh : CONFIG_ZRAM is not set
With this patch:
root@HGH1000007090:/opt/work/linux/tools/testing/selftests/zram# sh ./zram.sh
zram.sh : No zram.ko module or /dev/zram0 device file not found
zram.sh : CONFIG_ZRAM is not set
Signed-off-by: Zhang Zhen <zhenzhang.zhang@huawei.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
'perf top' segfaults with following operation:
# perf top -e page-faults -p 11400 # 11400 never generates page-fault
Then on the resulting empty interface, press right key:
# ./perf top -e page-faults -p 11400
perf: Segmentation fault
-------- backtrace --------
./perf[0x535428]
/lib64/libc.so.6(+0x3545f)[0x7f0dd360745f]
./perf[0x531d46]
./perf(perf_evlist__tui_browse_hists+0x96)[0x5340d6]
./perf[0x44ba2f]
/lib64/libpthread.so.0(+0x81d0)[0x7f0dd49dc1d0]
/lib64/libc.so.6(clone+0x6c)[0x7f0dd36b90dc]
The bug resides in perf_evsel__hists_browse() that, in the above
circumstance browser->selection can be NULL, but code after
skip_annotation doesn't consider it.
This patch fix it by checking browser->selection before fetching
browser->selection->map.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1442226235-117265-1-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add test case for hists socket filter.
Signed-off-by: Kan Liang <kan.liang@intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1441377946-44429-5-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently, users can zoom in/out for threads and dso in 'perf top' and
'perf report'.
This patch extends it for the processor sockets.
'S' is the short key to zoom into current Processor Socket.
Signed-off-by: Kan Liang <kan.liang@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1441377946-44429-4-git-send-email-kan.liang@intel.com
[ - Made it elide the Socket column when zooming into it,
just like with the other zoom ops;
- Make it use browser->pstack, to unzoom level by level;
- Rename 'socket' variables to 'socket_id' to make it build on
older systems where it shadows a global glibc declaration ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This information will come from perf.data files of from the current
system, cached when needed, such as when the 'socket' sort order gets
introduced.
Signed-off-by: Kan Liang <kan.liang@intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1441377946-44429-1-git-send-email-kan.liang@intel.com
[ Don't blindly use env->cpu[al.cpu].socket_id & use machine->env, fixes by Jiri & Arnaldo ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'struct machine' represents the machine where the samples were/are
being collected, and we also have a 'struct perf_env' with extra details
about such machine, that we were collecting at 'perf.data' creation time
but we also needed when no perf.data file is being used, such as in
'perf top'.
So, get those structs closer together, as they provide a bigger picture
of the sample's environment.
In 'perf session', when the file argument is NULL, we can assume that
the tool is sampling the running machine, so point machine->env to
the global put in place in previous patches, while set it to the
perf_header.env one when reading from a file.
This paves the way for machine->env to be used in
perf_event__preprocess_sample to populate addr_location.socket.
Tested-by: Wang Nan <wangnan0@huawei.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-2ajotl0khscutm68exictoy9@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Out of the code to write the cpu topology map in the perf.data file
header.
Now if one needs the CPU topology map for the running machine, one needs
to call perf_env__read_cpu_topology_map(perf_env) and the info will be
stored in perf_env.cpu.
For now we're using a global perf_env variable, that will have its
contents freed after we run a builtin.
v2: Check perf_env__read_cpu_topology_map() return in
write_cpu_topology() (Kan Liang)
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1441828225-667-5-git-send-email-acme@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We have the tools/lib/ sysfs__read_int() for that, avoid code
duplication.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-fqg6vt5ku72pbf54ljg6tmoy@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
E.g.:
$ ./cpu__get_max_freq
3200000
It does that, as Kan's patch does, by looking at these files:
$ cat /sys/devices/system/cpu/online
0-3
$ ./sysfs__read_ull
devices/system/cpu/cpu0/cpufreq/cpuinfo_max_freq
/sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_max_freq=3200000
$
I.e. find out the first online CPU, then read its cpufreq info.
But do it in tools/lib/api/, so that other tools/ living code can use
it, not just perf.
Based-on-a-patch-by: Kan Liang <kan.liang@intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-915v4cvxqplaub8qco66b9mv@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To read either an int or an unsigned long long value from the given
file.
E.g.:
$ cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_max_freq
3200000
$ ./sysfs__read_ull
devices/system/cpu/cpu0/cpufreq/cpuinfo_max_freq
/sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_max_freq=3200000
$
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-4a12m4d5k8m4qgc1vguocvei@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Get msr pmu type when processing pmu_mappings
Signed-off-by: Kan Liang <kan.liang@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/n/tip-3ngei63gepydwxhvytl2wx89@git.kernel.org
[ Fixed it up wrt moving perf_env from header.h ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding tools/include into tags directories, to have include definitions
reachable via tags/cscope.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Raphael Beamonte <raphael.beamonte@gmail.com>
Link: http://lkml.kernel.org/r/1441615087-13886-3-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We have no use for it in evsel.h.
Tested-by: Wang Nan <wangnan0@huawei.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-um03yjrgyi3bj1hzqiqs4dsu@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since we were not setting it to at least 3 chars ('CPU'), it was being
reset to zero when recalculating the columns width when refreshing the
screen, in 'perf top'. Fix it.
Tested-by: Wang Nan <wangnan0@huawei.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-iqcdnkkqm6sew06x01fbijmy@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move this from two globals to perf_env global, that eventually will
be just perf_header->env or something else, to ease the refactoring
series, leave it as a global and go on reading more of its fields,
not as part of the header writing process but as a perf_env init one
that will be used for perf.data-less situations.
Tested-by: Wang Nan <wangnan0@huawei.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-2j78tdf8zn1ci0y6ji15bifj@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In ce80d3bef9 ("perf tools: Rename perf_session_env to perf_env") we
forgot to rename a few functions to the "perf_env" prefix, do it now.
Tested-by: Wang Nan <wangnan0@huawei.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-b3ui3z6ock89z1814pu2er98@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since it can be used separately from 'perf_session' and 'perf_header',
move it to separate include file and object, next csets will try to move
a perf_env__init() routine.
Tested-by: Wang Nan <wangnan0@huawei.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-ff2rw99tsn670y1b6gxbwdsi@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In preparation for introducing more arrays of tests, e.g. "arch tests"
(architecture-specific tests), abstract the code to iterate over the
list of tests into a helper function.
This way, code that uses a 'struct test' doesn't need to worry about how
the tests are grouped together and changes to the list of tests doesn't
require changes to the code using it.
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Kanaka Juvva <kanaka.d.juvva@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vikas Shivappa <vikas.shivappa@intel.com>
Cc: Vince Weaver <vince@deater.net>
Link: http://lkml.kernel.org/r/1441479742-15402-2-git-send-email-matt@codeblueprint.co.uk
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch test cpu core_id and socket_id which are stored in perf_env.
Commiter note:
# perf test topo
40: Test topology in session: Ok
# perf test -v topo
40: Test topology in session:
--- start ---
test child forked, pid 31767
templ file: /tmp/perf-test-VTZ1PL
CPU 0, core 0, socket 0
CPU 1, core 1, socket 0
CPU 2, core 0, socket 0
CPU 3, core 1, socket 0
test child finished with 0
---- end ----
Test topology in session: Ok
#
Based-on-a-patch-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Kan Liang <kan.liang@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/1441357111-64522-1-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Using tracing_path interface on several places, that more or less
copy the functionality of tracing_path interface.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Raphael Beamonte <raphael.beamonte@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1441180605-24737-16-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We have all the functionality in fs.c, let's remove unneeded
objects.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Raphael Beamonte <raphael.beamonte@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1441180605-24737-15-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Switching to the fs.c related filesystem framework.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Raphael Beamonte <raphael.beamonte@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1441180605-24737-14-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Making tracing_path__strerror_open_tp message generic by mentioning both
debugfs/tracefs words in error message plus the tracing_path instead of
debugfs_mountpoint.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Raphael Beamonte <raphael.beamonte@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1441180605-24737-7-git-send-email-jolsa@kernel.org
[ Add comment for the ENOENT case out of this patch discussion thread ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
objdump output can contain repeated bytes. At the moment test reads all
output sequentially, assuming each address is represented in output only
once:
ffffffff8164efb3 <retint_swapgs+0x9>:
ffffffff8164efb3: c1 5d 00 eb rcrl $0xeb,0x0(%rbp)
ffffffff8164efb7: 00 4c 8b 5c add %cl,0x5c(%rbx,%rcx,4)
ffffffff8164efb8 <restore_c_regs_and_iret>:
ffffffff8164efb8: 4c 8b 5c 24 30 mov 0x30(%rsp),%r11
ffffffff8164efbd: 4c 8b 54 24 38 mov 0x38(%rsp),%r10
Store objdump output to buffer according to offset calculated from
address on each line.
Signed-off-by: Jan Stancek <jstancek@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/ad13289a55d6350f7717757c7e32c2d4286402bd.1441181335.git.jstancek@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Update the membarrier syscall self-test to match the membarrier
interface. Extend coverage of the interface. Consider ENOSYS as a
"SKIP" test, since it is a valid configuration, but does not allow
testing the system call.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Pranith Kumar <bobby.prani@gmail.com>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add a self test for the membarrier system call.
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge second patch-bomb from Andrew Morton:
"Almost all of the rest of MM. There was an unusually large amount of
MM material this time"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (141 commits)
zpool: remove no-op module init/exit
mm: zbud: constify the zbud_ops
mm: zpool: constify the zpool_ops
mm: swap: zswap: maybe_preload & refactoring
zram: unify error reporting
zsmalloc: remove null check from destroy_handle_cache()
zsmalloc: do not take class lock in zs_shrinker_count()
zsmalloc: use class->pages_per_zspage
zsmalloc: consider ZS_ALMOST_FULL as migrate source
zsmalloc: partial page ordering within a fullness_list
zsmalloc: use shrinker to trigger auto-compaction
zsmalloc: account the number of compacted pages
zsmalloc/zram: introduce zs_pool_stats api
zsmalloc: cosmetic compaction code adjustments
zsmalloc: introduce zs_can_compact() function
zsmalloc: always keep per-class stats
zsmalloc: drop unused variable `nr_to_migrate'
mm/memblock.c: fix comment in __next_mem_range()
mm/page_alloc.c: fix type information of memoryless node
memory-hotplug: fix comments in zone_spanned_pages_in_node() and zone_spanned_pages_in_node()
...
This update adds new zram test and fixes to problems found
during testing this new zram test. In addition, there are
a few bug fixes and ksefltest improvement patches from Linaro
developers.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=dXt3
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-4.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest update from Shuah Khan:
"This update adds new zram test and fixes to problems found during
testing this new zram test. In addition, there are a few bug fixes
and ksefltest improvement patches from Linaro developers.
I will send another update later on this week to fix kselftest
breakage due to commit 2bf9e0ab08 ("locking/static_keys: Provide a
selftest") after the fix soaks in next for a couple of days"
* tag 'linux-kselftest-4.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/zram: Makefile fix
selftests/zram: must be run as root
selftests: breakpoints: fix installing error on the architecture except x86
selftests: check before install
selftests/zram: Adding zram tests
The hugetlb selftests provide minimal coverage. Have run script point
people at libhugetlbfs for better regression testing.
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Joern Engel <joern@logfs.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: David Rientjes <rientjes@google.com>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This manually reverts 7e50533d4b ("selftests: add hugetlbfstest").
The hugetlbfstest test depends on hugetlb pages being counted in a
task's rss. This functionality is not in the kernel, so the test will
always fail. Remove test to avoid confusion.
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Joern Engel <joern@logfs.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: David Rientjes <rientjes@google.com>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch sets bit 56 in pagemap if this page is mapped only once. It
allows to detect exclusively used pages without exposing PFN:
present file exclusive state
0 0 0 non-present
1 1 0 file page mapped somewhere else
1 1 1 file page mapped only here
1 0 0 anon non-CoWed page (shared with parent/child)
1 0 1 anon CoWed page (or never forked)
CoWed pages in (MAP_FILE | MAP_PRIVATE) areas are anon in this context.
MMap-exclusive bit doesn't reflect potential page-sharing via swapcache:
page could be mapped once but has several swap-ptes which point to it.
Application could detect that by swap bit in pagemap entry and touch that
pte via /proc/pid/mem to get real information.
See http://lkml.kernel.org/r/CAEVpBa+_RyACkhODZrRvQLs80iy0sqpdrd0AaP_-tgnX3Y9yNQ@mail.gmail.com
Requested by Mark Williamson.
[akpm@linux-foundation.org: fix spello]
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Reviewed-by: Mark Williamson <mwilliamson@undo-software.com>
Tested-by: Mark Williamson <mwilliamson@undo-software.com>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch removes page-shift bits (scheduled to remove since 3.11) and
completes migration to the new bit layout. Also it cleans messy macro.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Mark Williamson <mwilliamson@undo-software.com>
Tested-by: Mark Williamson <mwilliamson@undo-software.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
On 32-bit:
userfaultfd.c: In function 'locking_thread':
userfaultfd.c:152: warning: left shift count >= width of type
userfaultfd.c: In function 'uffd_poll_thread':
userfaultfd.c:295: warning: cast to pointer from integer of different size
userfaultfd.c: In function 'uffd_read_thread':
userfaultfd.c:332: warning: cast to pointer from integer of different size
Fix the shift warning by splitting the shift in two parts, and the
integer/pointer warnigns by adding intermediate casts to "unsigned long".
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
1/ Introduce ZONE_DEVICE and devm_memremap_pages() as a generic
mechanism for adding device-driver-discovered memory regions to the
kernel's direct map. This facility is used by the pmem driver to
enable pfn_to_page() operations on the page frames returned by DAX
('direct_access' in 'struct block_device_operations'). For now, the
'memmap' allocation for these "device" pages comes from "System
RAM". Support for allocating the memmap from device memory will
arrive in a later kernel.
2/ Introduce memremap() to replace usages of ioremap_cache() and
ioremap_wt(). memremap() drops the __iomem annotation for these
mappings to memory that do not have i/o side effects. The
replacement of ioremap_cache() with memremap() is limited to the
pmem driver to ease merging the api change in v4.3. Completion of
the conversion is targeted for v4.4.
3/ Similar to the usage of memcpy_to_pmem() + wmb_pmem() in the pmem
driver, update the VFS DAX implementation and PMEM api to provide
persistence guarantees for kernel operations on a DAX mapping.
4/ Convert the ACPI NFIT 'BLK' driver to map the block apertures as
cacheable to improve performance.
5/ Miscellaneous updates and fixes to libnvdimm including support
for issuing "address range scrub" commands, clarifying the optimal
'sector size' of pmem devices, a clarification of the usage of the
ACPI '_STA' (status) property for DIMM devices, and other minor
fixes.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=o57/
-----END PGP SIGNATURE-----
Merge tag 'libnvdimm-for-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm updates from Dan Williams:
"This update has successfully completed a 0day-kbuild run and has
appeared in a linux-next release. The changes outside of the typical
drivers/nvdimm/ and drivers/acpi/nfit.[ch] paths are related to the
removal of IORESOURCE_CACHEABLE, the introduction of memremap(), and
the introduction of ZONE_DEVICE + devm_memremap_pages().
Summary:
- Introduce ZONE_DEVICE and devm_memremap_pages() as a generic
mechanism for adding device-driver-discovered memory regions to the
kernel's direct map.
This facility is used by the pmem driver to enable pfn_to_page()
operations on the page frames returned by DAX ('direct_access' in
'struct block_device_operations').
For now, the 'memmap' allocation for these "device" pages comes
from "System RAM". Support for allocating the memmap from device
memory will arrive in a later kernel.
- Introduce memremap() to replace usages of ioremap_cache() and
ioremap_wt(). memremap() drops the __iomem annotation for these
mappings to memory that do not have i/o side effects. The
replacement of ioremap_cache() with memremap() is limited to the
pmem driver to ease merging the api change in v4.3.
Completion of the conversion is targeted for v4.4.
- Similar to the usage of memcpy_to_pmem() + wmb_pmem() in the pmem
driver, update the VFS DAX implementation and PMEM api to provide
persistence guarantees for kernel operations on a DAX mapping.
- Convert the ACPI NFIT 'BLK' driver to map the block apertures as
cacheable to improve performance.
- Miscellaneous updates and fixes to libnvdimm including support for
issuing "address range scrub" commands, clarifying the optimal
'sector size' of pmem devices, a clarification of the usage of the
ACPI '_STA' (status) property for DIMM devices, and other minor
fixes"
* tag 'libnvdimm-for-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (34 commits)
libnvdimm, pmem: direct map legacy pmem by default
libnvdimm, pmem: 'struct page' for pmem
libnvdimm, pfn: 'struct page' provider infrastructure
x86, pmem: clarify that ARCH_HAS_PMEM_API implies PMEM mapped WB
add devm_memremap_pages
mm: ZONE_DEVICE for "device memory"
mm: move __phys_to_pfn and __pfn_to_phys to asm/generic/memory_model.h
dax: drop size parameter to ->direct_access()
nd_blk: change aperture mapping from WC to WB
nvdimm: change to use generic kvfree()
pmem, dax: have direct_access use __pmem annotation
dax: update I/O path to do proper PMEM flushing
pmem: add copy_from_iter_pmem() and clear_pmem()
pmem, x86: clean up conditional pmem includes
pmem: remove layer when calling arch_has_wmb_pmem()
pmem, x86: move x86 PMEM API to new pmem.h header
libnvdimm, e820: make CONFIG_X86_PMEM_LEGACY a tristate option
pmem: switch to devm_ allocations
devres: add devm_memremap
libnvdimm, btt: write and validate parent_uuid
...
It changed as result of other syscalls, and while the system call list
itself was correctly updated, the selftest program was not.
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
User visible:
- Use PERF_RECORD_SWITCH when available in intel-pt, instead of
"sched:sched_switch" events, enabling an unprivileged user to trace
multi-threaded or multi-process workloads (Adrian Hunter)
- Always use non inlined file name for 'srcfile' sort key (Andi Kleen)
- Quieten failed to read counter message, helps in systems without
backend-stalled-cycles (Andi Kleen)
Infrastructure:
- Add a 'perf test' entry for decoding of new x86 instructions (Adrian Hunter)
- Add new instructions (sha, clflushopt, clwb, pcommit, rdpkru, wrpkru, xsavec,
xsaves, xrstors) to the x86 instruction decoder (Adrian Hunter)
- Add a build test to warn when source code drifts happen for the
instruction decoder files in the kernel and in tools/perf (Adrian Hunter)
- Copy linux/filter.h to tools/include (He Kuang)
- Support function __get_dynamic_array_len in libtraceevent (He Kuanguuu)
- Tracing path finding/mounting/error reporting refactorings (Jiri Olsa)
- Store CPU socket and core IDs in perf.data (Kan Liang)
- Reorganize add/del probe insertion routines in 'perf probe' (Namhyung Kim, Wang Nan)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=uRtf
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
User visible changes:
- Use PERF_RECORD_SWITCH when available in intel-pt, instead of
"sched:sched_switch" events, enabling an unprivileged user to trace
multi-threaded or multi-process workloads. (Adrian Hunter)
- Always use non inlined file name for 'srcfile' sort key. (Andi Kleen)
- Quieten failed to read counter message, helps in systems without
backend-stalled-cycles. (Andi Kleen)
Infrastructure changes:
- Add a 'perf test' entry for decoding of new x86 instructions. (Adrian Hunter)
- Add new instructions (sha, clflushopt, clwb, pcommit, rdpkru, wrpkru, xsavec,
xsaves, xrstors) to the x86 instruction decoder. (Adrian Hunter)
- Add a build test to warn when source code drifts happen for the
instruction decoder files in the kernel and in tools/perf. (Adrian Hunter)
- Copy linux/filter.h to tools/include. (He Kuang)
- Support function __get_dynamic_array_len in libtraceevent. (He Kuanguuu)
- Tracing path finding/mounting/error reporting refactorings. (Jiri Olsa)
- Store CPU socket and core IDs in perf.data. (Kan Liang)
- Reorganize add/del probe insertion routines in 'perf probe'. (Namhyung Kim, Wang Nan)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
vm86 exposes an interesting attack surface against the entry
code. Since vm86 is mostly useless anyway if mmap_min_addr != 0,
just turn it off in that case.
There are some reports that vbetool can work despite setting
mmap_min_addr to zero. This shouldn't break that use case,
as CAP_SYS_RAWIO already overrides mmap_min_addr.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Austin S Hemmelgarn <ahferroin7@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Josh Boyer <jwboyer@fedoraproject.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stas Sergeev <stsp@list.ru>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This test allocates two virtual areas and bounces the physical memory
across the two virtual areas using only userfaultfd.
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Shuah Khan <shuah.kh@samsung.com>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This test focuses on ambient capabilities. It requires either root or
the ability to create user namespaces. Some of the test cases will be
skipped for nonroot users.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Christoph Lameter <cl@linux.com> # Original author
Cc: Serge E. Hallyn <serge.hallyn@ubuntu.com>
Cc: James Morris <james.l.morris@oracle.com>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Showing actual trace event when deleteing perf events is only needed in
perf probe command. But the add functionality itself can be used by
other places. So move the printing code into the cmd_probe().
The output is not changed.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1441368963-11565-5-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The del_perf_probe_events() does 2 things:
1. find existing events which match to filter
2. delete such trace events from kernel
But sometimes we need to do something with the trace events. So split
the funtion into two, so that it can access intermediate trace events
name using strlist if needed.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1441368963-11565-4-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Showing actual trace event when adding perf events is only needed in
perf probe command. But the add functionality itself can be used by
other places. So move the printing code into the cmd_probe().
Also it combines the output if more than one event is added.
Before:
$ sudo perf probe -a do_fork -a do_exit
Added new event:
probe:do_fork (on do_fork)
You can now use it in all perf tools, such as:
perf record -e probe:do_fork -aR sleep 1
Added new events:
probe:do_exit (on do_exit)
probe:do_exit_1 (on do_exit)
You can now use it in all perf tools, such as:
perf record -e probe:do_exit_1 -aR sleep 1
After:
$ sudo perf probe -a do_fork -a do_exit
Added new events:
probe:do_fork (on do_fork)
probe:do_exit (on do_exit)
probe:do_exit_1 (on do_exit)
You can now use it in all perf tools, such as:
perf record -e probe:do_exit_1 -aR sleep 1
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1441368963-11565-3-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch drops struct __event_package structure. Instead, it adds a
'struct trace_probe_event' pointer to 'struct perf_probe_event'.
The trace_probe_event information gives further patches a chance to
access actual probe points and actual arguments.
Using them, 'perf probe' can get the whole list of added probes and
print them at once.
Other users like the upcoming bpf_loader will be able to attach one bpf
program to different probing points of an inline function (which has
multiple probing points) and glob functions.
Moreover, by reading the arguments information, bpf code for reading
those arguments can be generated.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1441368963-11565-2-git-send-email-namhyung@kernel.org
[namhyung: extract necessary part from the existing patch]
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The add_perf_probe_events() does 3 things:
1. convert all perf events to trace events
2. add all trace events to kernel
3. cleanup all trace events
But sometimes we need to do something with the trace events. So split
the funtion into three, so that it can access intermediate trace events
via struct __event_package if needed.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1441368963-11565-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add support for selecting and processing PERF_RECORD_SWITCH events for
use by Intel PT. If they are available, they will be used in preference
to sched_switch events.
This enables an unprivileged user to trace multi-threaded or
multi-process workloads with any level of perf_event_paranoid. However
it depends on kernel support for PERF_RECORD_SWITCH.
Without this patch, tracing a multi-threaded workload will decode
without error but all the data will be attributed to the main thread.
Without this patch, tracing a multi-process workload will result in
decoder errors because the decoder will not know which executable is
executing.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1439458857-30636-3-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Need to check evsel before passing it to dump_sample().
Signed-off-by: Kan Liang <kan.liang@intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1441283463-51050-5-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add xsavec, xsaves and xrstors to the op code map and the perf tools new
instructions test. To run the test:
$ tools/perf/perf test "x86 ins"
39: Test x86 instruction decoder - new instructions : Ok
Or to see the details:
$ tools/perf/perf test -v "x86 ins" 2>&1 | grep 'xsave\|xrst'
For information about xsavec, xsaves and xrstors, refer the Intel SDM.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qiaowei Ren <qiaowei.ren@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1441196131-20632-8-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add rdpkru and wrpkru to the op code map and the perf tools new
instructions test. In the case of the test, only the bytes can be
tested at the moment since binutils doesn't support the instructions
yet. To run the test:
$ tools/perf/perf test "x86 ins"
39: Test x86 instruction decoder - new instructions : Ok
Or to see the details:
$ tools/perf/perf test -v "x86 ins" 2>&1 | grep pkru
For information about rdpkru and wrpkru, refer the Intel SDM.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qiaowei Ren <qiaowei.ren@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1441196131-20632-7-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Intel Architecture Instruction Set Extensions Programing Reference (Oct
2014) describes 3 new memory instructions, namely clflushopt, clwb and
pcommit. Add them to the op code map and the perf tools new
instructions test. e.g.
$ tools/perf/perf test "x86 ins"
39: Test x86 instruction decoder - new instructions : Ok
Or to see the details:
$ tools/perf/perf test -v "x86 ins"
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qiaowei Ren <qiaowei.ren@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1441196131-20632-6-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Intel SHA Extensions are explained in the Intel Architecture
Instruction Set Extensions Programing Reference (Oct 2014).
There are 7 new instructions. Add them to the op code map
and the perf tools new instructions test. e.g.
$ tools/perf/perf test "x86 ins"
39: Test x86 instruction decoder - new instructions : Ok
Or to see the details:
$ tools/perf/perf test -v "x86 ins" 2>&1 | grep sha
Committer note:
3 lines of details, for the curious:
$ perf test -v "x86 ins" 2>&1 | grep sha256msg1 | tail -3
Decoded ok: 0f 38 cc 84 08 78 56 34 12 sha256msg1 0x12345678(%rax,%rcx,1),%xmm0
Decoded ok: 0f 38 cc 84 c8 78 56 34 12 sha256msg1 0x12345678(%rax,%rcx,8),%xmm0
Decoded ok: 44 0f 38 cc bc c8 78 56 34 12 sha256msg1 0x12345678(%rax,%rcx,8),%xmm15
$
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qiaowei Ren <qiaowei.ren@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1441196131-20632-5-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The MPX instructions are presently not described in the SDM
opcode maps, and there are not encoding characters for bnd
registers, address method or operand type. So the kernel
opcode map is using 'Gv' for bnd registers and 'Ev' for
everything else. That is fine because the instruction
decoder does not use that information anyway, except as
an indication that there is a ModR/M byte.
Nevertheless, in some cases the 'Gv' and 'Ev' are the wrong
way around, BNDLDX and BNDSTX have 2 operands not 3, and it
wouldn't hurt to identify the mandatory prefixes.
This has no effect on the decoding of valid instructions,
but the addition of the mandatory prefixes will cause some
invalid instructions to error out that wouldn't have
previously.
Note that perf tools has a copy of the instruction decoder
and provides a test for new instructions which includes MPX
instructions e.g.
$ perf test "x86 ins"
39: Test x86 instruction decoder - new instructions : Ok
Or to see the details:
$ perf test -v "x86 ins"
Commiter notes:
And to see these MPX instructions specifically:
$ perf test -v "x86 ins" 2>&1 | grep bndldx | head -3
Decoded ok: 0f 1a 00 bndldx (%eax),%bnd0
Decoded ok: 0f 1a 05 78 56 34 12 bndldx 0x12345678,%bnd0
Decoded ok: 0f 1a 18 bndldx (%eax),%bnd3
$ perf test -v "x86 ins" 2>&1 | grep bndstx | head -3
Decoded ok: 0f 1b 00 bndstx %bnd0,(%eax)
Decoded ok: 0f 1b 05 78 56 34 12 bndstx %bnd0,0x12345678
Decoded ok: 0f 1b 18 bndstx %bnd3,(%eax)
$
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qiaowei Ren <qiaowei.ren@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1441196131-20632-4-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a new test titled:
Test x86 instruction decoder - new instructions
The purpose of this test is to check the instruction decoder after new
instructions have been added. Initially, MPX instructions are tested
which are already supported, but the definitions in x86-opcode-map.txt
will be tweaked in a subsequent patch, after which this test can be run
to verify those changes.
The data for the test comes from assembly language instructions in
insn-x86-dat-src.c which is converted into bytes by the scripts
gen-insn-x86-dat.sh and gen-insn-x86-dat.awk, and included into the test
program insn-x86.c as insn-x86-dat-32.c and insn-x86-dat-64.c.
The conversion is not done as part of the perf tools build because the
test data must be under (git) change control in order for the test to be
repeatably-correct. Also it may require a recent version of binutils.
Commiter notes:
Using it:
# perf test decoder
39: Test x86 instruction decoder - new instructions : Ok
# perf test -v decoder
39: Test x86 instruction decoder - new instructions :
--- start ---
test child forked, pid 21970
Decoded ok: 0f 31 rdtsc
Decoded ok: f3 0f 1b 00 bndmk (%eax),%bnd0
Decoded ok: f3 0f 1b 05 78 56 34 12 bndmk 0x12345678,%bnd0
Decoded ok: f3 0f 1b 18 bndmk (%eax),%bnd3
<SNIP>
Decoded ok: f2 e9 00 00 00 00 bnd jmpq 402 <main+0x402>
Decoded ok: f2 e9 00 00 00 00 bnd jmpq 408 <main+0x408>
Decoded ok: 67 f2 ff 21 bnd jmpq *(%ecx)
Decoded ok: f2 0f 85 00 00 00 00 bnd jne 413 <main+0x413>
test child finished with 0
---- end ----
Test x86 instruction decoder - new instructions: Ok
#
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qiaowei Ren <qiaowei.ren@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1441196131-20632-3-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf tools has a copy of the x86 instruction decoder used by the kernel.
The expectation is that the copy will be kept more-or-less in-synch with
the kernel version. Consequently it is helpful to know if there are
differences.
This patch adds a check into the perf tools build so that a diff is done
on the sources, and a warning is printed if they are different. Note
that the warning is not fatal and the build continues as normal.
The check is done as part of building the instruction decoder, so, like
a compiler warning, it is not seen unless the instruction decoder has to
be re-compiled. e.g.
$ make -C tools/perf >/dev/null
$ echo "/* blah */" >> tools/perf/util/intel-pt-decoder/inat_types.h
$ make -C tools/perf >/dev/null
Warning: Intel PT: x86 instruction decoder differs from kernel
$ make -C tools/perf >/dev/null
$
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qiaowei Ren <qiaowei.ren@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1441196131-20632-2-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add FSTYPE__configured() (where FSTYPE is one of sysfs, procfs, debugfs,
tracefs) interface that returns bool state of the filesystem mount:
true - mounted, false - not mounted
It will not try to mount the filesystem.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Raphael Beamonte <raphael.beamonte@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1441180605-24737-13-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding FSTYPE__mount (where FSTYPE is, as of now, one of sysfs, procfs,
debugfs, tracefs) method that tries to mount the filesystem in case no
mount of FSTYPE is found.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Raphael Beamonte <raphael.beamonte@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1441180605-24737-12-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding tracefs support into fs.c framework. It'll replace the tracefs
object functionality in following patches.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Raphael Beamonte <raphael.beamonte@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1441180605-24737-11-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding debugfs support into fs.c framework. It'll replace the debugfs
object functionality in following patches.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Raphael Beamonte <raphael.beamonte@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1441180605-24737-10-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There's no need to export SYSFS_MAGIC PROC_SUPER_MAGIC in fs.h. Leave
them in the fs.c.
Link: http://lkml.kernel.org/n/tip-b2cd1bb7yvbazq5oua24oz18@git.kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Raphael Beamonte <raphael.beamonte@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1441180605-24737-9-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We're going to get rid of findfs.h in following patches, but we'll still
need these macros.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Raphael Beamonte <raphael.beamonte@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1441180605-24737-8-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Moving debugfs__strerror_open out of api/fs/debugfs.c, because it's not
debugfs specific. It'll be changed to consider tracefs mount as well in
following patches.
Renaming it into tracing_path__strerror_open_tp to fit into the
namespace. No functional change is intended.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Reviewed-by: Matt Fleming <matt.fleming@intel.com>
Cc: Raphael Beamonte <raphael.beamonte@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1441180605-24737-6-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Moving tracing_path interface into api/fs/tracing_path.c out of util.c.
It seems generic enough to be used by others, and I couldn't think of
better place.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Reviewed-by: Matt Fleming <matt.fleming@intel.com>
Reviewed-by: Raphael Beamonte <raphael.beamonte@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1441180605-24737-5-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
- Support "hybrid" iommu/direct DMA ops for coherent_mask < dma_mask from Benjamin Herrenschmidt
- EEH fixes for SRIOV from Gavin
- Introduce rtas_get_sensor_fast() for IRQ handlers from Thomas Huth
- Use hardware RNG for arch_get_random_seed_* not arch_get_random_* from Paul Mackerras
- Seccomp filter support from Michael Ellerman
- opal_cec_reboot2() handling for HMIs & machine checks from Mahesh Salgaonkar
- Add powerpc timebase as a trace clock source from Naveen N. Rao
- Misc cleanups in the xmon, signal & SLB code from Anshuman Khandual
- Add an inline function to update POWER8 HID0 from Gautham R. Shenoy
- Fix pte_pagesize_index() crash on 4K w/64K hash from Michael Ellerman
- Drop support for 64K local store on 4K kernels from Michael Ellerman
- move dma_get_required_mask() from pnv_phb to pci_controller_ops from Andrew Donnellan
- Initialize distance lookup table from drconf path from Nikunj A Dadhania
- Enable RTC class support from Vaibhav Jain
- Disable automatically blocked PCI config from Gavin Shan
- Add LEDs driver for PowerNV platform from Vasant Hegde
- Fix endianness issues in the HVSI driver from Laurent Dufour
- Kexec endian fixes from Samuel Mendoza-Jonas
- Fix corrupted pdn list from Gavin Shan
- Fix fenced PHB caused by eeh_slot_error_detail() from Gavin Shan
- Freescale updates from Scott: Highlights include 32-bit memcpy/memset
optimizations, checksum optimizations, 85xx config fragments and updates,
device tree updates, e6500 fixes for non-SMP, and misc cleanup and minor
fixes.
- A ton of cxl updates & fixes:
- Add explicit precision specifiers from Rasmus Villemoes
- use more common format specifier from Rasmus Villemoes
- Destroy cxl_adapter_idr on module_exit from Johannes Thumshirn
- Destroy afu->contexts_idr on release of an afu from Johannes Thumshirn
- Compile with -Werror from Daniel Axtens
- EEH support from Daniel Axtens
- Plug irq_bitmap getting leaked in cxl_context from Vaibhav Jain
- Add alternate MMIO error handling from Ian Munsie
- Allow release of contexts which have been OPENED but not STARTED from Andrew Donnellan
- Remove use of macro DEFINE_PCI_DEVICE_TABLE from Vaishali Thakkar
- Release irqs if memory allocation fails from Vaibhav Jain
- Remove racy attempt to force EEH invocation in reset from Daniel Axtens
- Fix + cleanup error paths in cxl_dev_context_init from Ian Munsie
- Fix force unmapping mmaps of contexts allocated through the kernel api from Ian Munsie
- Set up and enable PSL Timebase from Philippe Bergheaud
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=n9+X
-----END PGP SIGNATURE-----
Merge tag 'powerpc-4.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- support "hybrid" iommu/direct DMA ops for coherent_mask < dma_mask
from Benjamin Herrenschmidt
- EEH fixes for SRIOV from Gavin
- introduce rtas_get_sensor_fast() for IRQ handlers from Thomas Huth
- use hardware RNG for arch_get_random_seed_* not arch_get_random_*
from Paul Mackerras
- seccomp filter support from Michael Ellerman
- opal_cec_reboot2() handling for HMIs & machine checks from Mahesh
Salgaonkar
- add powerpc timebase as a trace clock source from Naveen N. Rao
- misc cleanups in the xmon, signal & SLB code from Anshuman Khandual
- add an inline function to update POWER8 HID0 from Gautham R. Shenoy
- fix pte_pagesize_index() crash on 4K w/64K hash from Michael Ellerman
- drop support for 64K local store on 4K kernels from Michael Ellerman
- move dma_get_required_mask() from pnv_phb to pci_controller_ops from
Andrew Donnellan
- initialize distance lookup table from drconf path from Nikunj A
Dadhania
- enable RTC class support from Vaibhav Jain
- disable automatically blocked PCI config from Gavin Shan
- add LEDs driver for PowerNV platform from Vasant Hegde
- fix endianness issues in the HVSI driver from Laurent Dufour
- kexec endian fixes from Samuel Mendoza-Jonas
- fix corrupted pdn list from Gavin Shan
- fix fenced PHB caused by eeh_slot_error_detail() from Gavin Shan
- Freescale updates from Scott: Highlights include 32-bit memcpy/memset
optimizations, checksum optimizations, 85xx config fragments and
updates, device tree updates, e6500 fixes for non-SMP, and misc
cleanup and minor fixes.
- a ton of cxl updates & fixes:
- add explicit precision specifiers from Rasmus Villemoes
- use more common format specifier from Rasmus Villemoes
- destroy cxl_adapter_idr on module_exit from Johannes Thumshirn
- destroy afu->contexts_idr on release of an afu from Johannes
Thumshirn
- compile with -Werror from Daniel Axtens
- EEH support from Daniel Axtens
- plug irq_bitmap getting leaked in cxl_context from Vaibhav Jain
- add alternate MMIO error handling from Ian Munsie
- allow release of contexts which have been OPENED but not STARTED
from Andrew Donnellan
- remove use of macro DEFINE_PCI_DEVICE_TABLE from Vaishali Thakkar
- release irqs if memory allocation fails from Vaibhav Jain
- remove racy attempt to force EEH invocation in reset from Daniel
Axtens
- fix + cleanup error paths in cxl_dev_context_init from Ian Munsie
- fix force unmapping mmaps of contexts allocated through the kernel
api from Ian Munsie
- set up and enable PSL Timebase from Philippe Bergheaud
* tag 'powerpc-4.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (140 commits)
cxl: Set up and enable PSL Timebase
cxl: Fix force unmapping mmaps of contexts allocated through the kernel api
cxl: Fix + cleanup error paths in cxl_dev_context_init
powerpc/eeh: Fix fenced PHB caused by eeh_slot_error_detail()
powerpc/pseries: Cleanup on pci_dn_reconfig_notifier()
powerpc/pseries: Fix corrupted pdn list
powerpc/powernv: Enable LEDS support
powerpc/iommu: Set default DMA offset in dma_dev_setup
cxl: Remove racy attempt to force EEH invocation in reset
cxl: Release irqs if memory allocation fails
cxl: Remove use of macro DEFINE_PCI_DEVICE_TABLE
powerpc/powernv: Fix mis-merge of OPAL support for LEDS driver
powerpc/powernv: Reset HILE before kexec_sequence()
powerpc/kexec: Reset secondary cpu endianness before kexec
powerpc/hvsi: Fix endianness issues in the HVSI driver
leds/powernv: Add driver for PowerNV platform
powerpc/powernv: Create LED platform device
powerpc/powernv: Add OPAL interfaces for accessing and modifying system LED states
powerpc/powernv: Fix the log message when disabling VF
cxl: Allow release of contexts which have been OPENED but not STARTED
...
Pull perf fixes from Ingo Molnar:
"Tooling fixes plus a handful of late arriving tooling changes"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf tools: Fix link time error with sample_reg_masks on non x86
perf build: Fix Intel PT instruction decoder dependency problem
perf dwarf: Fix potential array out of bounds access
perf record: Add ability to name registers to record
perf/x86: Add list of register names
perf script: Enable printing of interrupted machine state
perf evlist: Open event on evsel cpus and threads
bpf tools: New API to get name from a BPF object
perf tools: Fix build on powerpc broken by pt/bts
Pull locking and atomic updates from Ingo Molnar:
"Main changes in this cycle are:
- Extend atomic primitives with coherent logic op primitives
(atomic_{or,and,xor}()) and deprecate the old partial APIs
(atomic_{set,clear}_mask())
The old ops were incoherent with incompatible signatures across
architectures and with incomplete support. Now every architecture
supports the primitives consistently (by Peter Zijlstra)
- Generic support for 'relaxed atomics':
- _acquire/release/relaxed() flavours of xchg(), cmpxchg() and {add,sub}_return()
- atomic_read_acquire()
- atomic_set_release()
This came out of porting qwrlock code to arm64 (by Will Deacon)
- Clean up the fragile static_key APIs that were causing repeat bugs,
by introducing a new one:
DEFINE_STATIC_KEY_TRUE(name);
DEFINE_STATIC_KEY_FALSE(name);
which define a key of different types with an initial true/false
value.
Then allow:
static_branch_likely()
static_branch_unlikely()
to take a key of either type and emit the right instruction for the
case. To be able to know the 'type' of the static key we encode it
in the jump entry (by Peter Zijlstra)
- Static key self-tests (by Jason Baron)
- qrwlock optimizations (by Waiman Long)
- small futex enhancements (by Davidlohr Bueso)
- ... and misc other changes"
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (63 commits)
jump_label/x86: Work around asm build bug on older/backported GCCs
locking, ARM, atomics: Define our SMP atomics in terms of _relaxed() operations
locking, include/llist: Use linux/atomic.h instead of asm/cmpxchg.h
locking/qrwlock: Make use of _{acquire|release|relaxed}() atomics
locking/qrwlock: Implement queue_write_unlock() using smp_store_release()
locking/lockref: Remove homebrew cmpxchg64_relaxed() macro definition
locking, asm-generic: Add _{relaxed|acquire|release}() variants for 'atomic_long_t'
locking, asm-generic: Rework atomic-long.h to avoid bulk code duplication
locking/atomics: Add _{acquire|release|relaxed}() variants of some atomic operations
locking, compiler.h: Cast away attributes in the WRITE_ONCE() magic
locking/static_keys: Make verify_keys() static
jump label, locking/static_keys: Update docs
locking/static_keys: Provide a selftest
jump_label: Provide a self-test
s390/uaccess, locking/static_keys: employ static_branch_likely()
x86, tsc, locking/static_keys: Employ static_branch_likely()
locking/static_keys: Add selftest
locking/static_keys: Add a new static_key interface
locking/static_keys: Rework update logic
locking/static_keys: Add static_key_{en,dis}able() helpers
...
Pull networking updates from David Miller:
"Another merge window, another set of networking changes. I've heard
rumblings that the lightweight tunnels infrastructure has been voted
networking change of the year. But what do I know?
1) Add conntrack support to openvswitch, from Joe Stringer.
2) Initial support for VRF (Virtual Routing and Forwarding), which
allows the segmentation of routing paths without using multiple
devices. There are some semantic kinks to work out still, but
this is a reasonably strong foundation. From David Ahern.
3) Remove spinlock fro act_bpf fast path, from Alexei Starovoitov.
4) Ignore route nexthops with a link down state in ipv6, just like
ipv4. From Andy Gospodarek.
5) Remove spinlock from fast path of act_gact and act_mirred, from
Eric Dumazet.
6) Document the DSA layer, from Florian Fainelli.
7) Add netconsole support to bcmgenet, systemport, and DSA. Also
from Florian Fainelli.
8) Add Mellanox Switch Driver and core infrastructure, from Jiri
Pirko.
9) Add support for "light weight tunnels", which allow for
encapsulation and decapsulation without bearing the overhead of a
full blown netdevice. From Thomas Graf, Jiri Benc, and a cast of
others.
10) Add Identifier Locator Addressing support for ipv6, from Tom
Herbert.
11) Support fragmented SKBs in iwlwifi, from Johannes Berg.
12) Allow perf PMUs to be accessed from eBPF programs, from Kaixu Xia.
13) Add BQL support to 3c59x driver, from Loganaden Velvindron.
14) Stop using a zero TX queue length to mean that a device shouldn't
have a qdisc attached, use an explicit flag instead. From Phil
Sutter.
15) Use generic geneve netdevice infrastructure in openvswitch, from
Pravin B Shelar.
16) Add infrastructure to avoid re-forwarding a packet in software
that was already forwarded by a hardware switch. From Scott
Feldman.
17) Allow AF_PACKET fanout function to be implemented in a bpf
program, from Willem de Bruijn"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1458 commits)
netfilter: nf_conntrack: make nf_ct_zone_dflt built-in
netfilter: nf_dup{4, 6}: fix build error when nf_conntrack disabled
net: fec: clear receive interrupts before processing a packet
ipv6: fix exthdrs offload registration in out_rt path
xen-netback: add support for multicast control
bgmac: Update fixed_phy_register()
sock, diag: fix panic in sock_diag_put_filterinfo
flow_dissector: Use 'const' where possible.
flow_dissector: Fix function argument ordering dependency
ixgbe: Resolve "initialized field overwritten" warnings
ixgbe: Remove bimodal SR-IOV disabling
ixgbe: Add support for reporting 2.5G link speed
ixgbe: fix bounds checking in ixgbe_setup_tc for 82598
ixgbe: support for ethtool set_rxfh
ixgbe: Avoid needless PHY access on copper phys
ixgbe: cleanup to use cached mask value
ixgbe: Remove second instance of lan_id variable
ixgbe: use kzalloc for allocating one thing
flow: Move __get_hash_from_flowi{4,6} into flow_dissector.c
ixgbe: Remove unused PCI bus types
...
In a couple of cases the 'comm' member of 'union event' has been used
instead of the correct member ('fork') when processing exit events.
In the cases where it has been used incorrectly, only the 'pid' and
'tid' are affected. The 'pid' value would be correct anyway because it
is in the same position in 'comm' and 'fork' events, but the 'tid' would
have been incorrectly assigned from 'ppid'.
However, for exit events, the kernel puts the current task in the 'ppid'
and 'ttid' which is the same as the exiting task. That is 'ppid' ==
'pid' and if the task is not multi-threaded, 'pid' == 'tid' i.e. the
data goes wrong only when tracing multi-threaded programs.
It is hard to find an example of how this would produce an error in
practice. There are 3 occurences of the fix:
1. perf script is only affected if !sample_id_all which only happens on
old kernels.
2. intel_pt is only affected when decoding without timestamps
and would probably still decode correctly - the exit event is
only used to flush out data which anyway gets flushed at the
end of the session
3. intel_bts also uses the exit event to flush data which
would probably not cause errors as it would get flushed at
the end of the session instead
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1439888825-27708-1-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Renaming all functions touching tracing_path under same namespace. New
interface is:
char tracing_path[];
- tracing mount path
char tracing_events_path[];
- tracing mount/events path
void tracing_path_set(const char *mountpoint);
- setting directly tracing_path(_events), used by --debugfs-dir option
const char *tracing_path_mount(void);
- initial setup of tracing_(events)_path, called from perf.c
mounts debugfs/tracefs if needed and possible
char *get_tracing_file(const char *name);
void put_tracing_file(char *file);
- get/put tracing file path
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Raphael Beamonte <raphael.beamonte@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1441180605-24737-4-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It's not used by any caller. We either detect the mountpoint or use
hardcoded one.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Raphael Beamonte <raphael.beamonte@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1441180605-24737-3-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since 3b3eb0445 running perf stat on a system without
backend-stalled-cycles spits out ugly warnings by default.
Since that is quite common, make the message a debug message only.
We know anyways that the counter wasn't read by the normal <unsupported>
output.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/1441147966-14917-1-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch stores the cpu socket_id and core_id in a perf.data header,
and reads them into the perf_env struct when processing perf.data files.
The changes modifies the CPU_TOPOLOGY section, making sure it is
backward/forward compatible.
The patch checks the section size before reading the core and socket ids.
It never reads data crossing the section boundary. An old perf binary
without this patch can also correctly read the perf.data from a new perf
with this patch.
Because the new info is added at the end of the cpu_topology section, an
old perf tool ignores the extra data.
Examples:
1. New perf with this patch read perf.data from an old perf without the
patch:
$ perf_new report -i perf_old.data --header-only -I
......
# sibling threads : 33
# sibling threads : 34
# sibling threads : 35
# Core ID and Socket ID information is not available
# node0 meminfo : total = 32823872 kB, free = 29315548 kB
# node0 cpu list : 0-17,36-53
......
2. Old perf without the patch reads perf.data from a new perf with the
patch:
$ perf_old report -i perf_new.data --header-only -I
......
# sibling threads : 33
# sibling threads : 34
# sibling threads : 35
# node0 meminfo : total = 32823872 kB, free = 29190932 kB
# node0 cpu list : 0-17,36-53
......
3. New perf read new perf.data:
$ perf_new report -i perf_new.data --header-only -I
......
# sibling threads : 33
# sibling threads : 34
# sibling threads : 35
# CPU 0: Core ID 0, Socket ID 0
# CPU 1: Core ID 1, Socket ID 0
......
# CPU 61: Core ID 10, Socket ID 1
# CPU 62: Core ID 11, Socket ID 1
# CPU 63: Core ID 16, Socket ID 1
# node0 meminfo : total = 32823872 kB, free = 29190932 kB
# node0 cpu list : 0-17,36-53
Signed-off-by: Kan Liang <kan.liang@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/1441115893-22006-2-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch moves the code which reads core_id and socket_id into
separate functions.
Signed-off-by: Kan Liang <kan.liang@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/1441115893-22006-1-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Support helper function __get_dynamic_array_len() in libtraceevent, this
function is used accompany with __print_array() or __print_hex(), but
currently it is not an available function in the function list of
process_function().
The total allocated length of the dynamic array is embedded in the top
half of __data_loc_##item field. This patch adds new arg type
PRINT_DYNAMIC_ARRAY_LEN to return the length to eval_num_arg(),
Signed-off-by: He Kuang <hekuang@huawei.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1440822125-52691-32-git-send-email-wangnan0@huawei.com
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>