Commit Graph

17 Commits

Author SHA1 Message Date
Bhumika Goyal 2331e06865 tty: serial: constify uart_ops structures
Declare uart_ops structures as const as they are only stored in the ops
field of an uart_port structure. This field is of type const, so
uart_ops structures having this property can be made const too.

File size details before and after patching.
First line of every .o file shows the file size before patching
and second line shows the size after patching.

   text	   data	    bss	    dec	    hex	filename

   2977	    456	     64	   3497	    da9	drivers/tty/serial/amba-pl010.o
   3169	    272	     64	   3505	    db1	drivers/tty/serial/amba-pl010.o

   3109	    456	      0	   3565	    ded	drivers/tty/serial/efm32-uart.o
   3301	    272	      0	   3573	    df5	drivers/tty/serial/efm32-uart.o

  10668	    753	      1	  11422	   2c9e	drivers/tty/serial/icom.o
  10860	    561	      1	  11422	   2c9e	drivers/tty/serial/icom.o

  23904	    408	      8	  24320	   5f00	drivers/tty/serial/ioc3_serial.o
  24088	    224	      8	  24320	   5f00	drivers/tty/serial/ioc3_serial.o

  10516	    560	      4	  11080	   2b48	drivers/tty/serial/ioc4_serial.o
  10709	    368	      4	  11081	   2b49	drivers/tty/serial/ioc4_serial.o

   7853	    648	   1216	   9717	   25f5	drivers/tty/serial/mpsc.o
   8037	    456	   1216	   9709	   25ed	drivers/tty/serial/mpsc.o

  10248	    456	      0	  10704	   29d0	drivers/tty/serial/omap-serial.o
  10440	    272	      0	  10712	   29d8	drivers/tty/serial/omap-serial.o

   8122	    532	   1984	  10638	   298e	drivers/tty/serial/pmac_zilog.o
   8306	    340	   1984	  10630	   2986	drivers/tty/serial/pmac_zilog.o

   3808	    456	      0	   4264	   10a8	drivers/tty/serial/pxa.o
   4000	    264	      0	   4264	   10a8	drivers/tty/serial/pxa.o

  21781	   3864	      0	  25645	   642d	drivers/tty/serial/serial-tegra.o
  22037	   3608	      0	  25645	   642d	drivers/tty/serial/serial-tegra.o

   2481	    456	     96	   3033	    bd9	drivers/tty/serial/sprd_serial.o
   2673	    272	     96	   3041	    be1	drivers/tty/serial/sprd_serial.o

   5534	    300	    512	   6346	   18ca	drivers/tty/serial/vr41xx_siu.o
   5630	    204	    512	   6346	   18ca	drivers/tty/serial/vr41xx_siu.o

   6730	   1576	    128	   8434	   20f2	drivers/tty/serial/vt8500_serial.o
   6986	   1320	    128	   8434	   20f2	drivers/tty/serial/vt8500_serial.o

Cross compiled for mips architecture.

   3005	    488	      0	   3493	    da5	drivers/tty/serial/pnx8xxx_uart.o
   3189	    304	      0	   3493	    da5	drivers/tty/serial/pnx8xxx_uart.o

   4272	    196	   1056	   5524	   1594	drivers/tty/serial/dz.o
   4368	    100	   1056	   5524	   1594	drivers/tty/serial/dz.o

   6551	    144	     16	   6711	   1a37	drivers/tty/serial/ip22zilog.o
   6647	     48	     16	   6711	   1a37	drivers/tty/serial/ip22zilog.o

   9612	    428	   1520	  11560	   2d28	drivers/tty/serial/serial_txx9.o
   9708	    332	   1520	  11560	   2d28	drivers/tty/serial/serial_txx9.o

   4156	    296	     16	   4468	   1174	drivers/tty/serial/ar933x_uart.o
   4252	    200	     16	   4468	   1174	drivers/tty/serial/ar933x_uart.o

Cross compiled for arm archiecture.

  11716	   1780	     44	  13540	   34e4	drivers/tty/serial/sirfsoc_uart.o
  11808	   1688	     44	  13540	   34e4	drivers/tty/serial/sirfsoc_uart.o

  13352	    596	     56	  14004	   36b4	drivers/tty/serial/amba-pl011.o
  13444	    504	     56	  14004	   36b4	drivers/tty/serial/amba-pl011.o

Cross compiled for sparc architecture.

   4664	    528	     32	   5224	   1468	drivers/tty/serial/sunhv.o
   4848	    344	     32	   5224	   1468	drivers/tty/serial/sunhv.o

   8080	    332	     28	   8440	   20f8	drivers/tty/serial/sunzilog.o
   8184	    228	     28	   8440	   20f8	drivers/tty/serial/sunzilog.o

Cross compiled for ia64 architecture.

  10226	    549	    472	  11247	   2bef	drivers/tty/serial/sn_console.o
  10414	    365	    472	  11251	   2bf3	drivers/tty/serial/sn_console.o

The files drivers/tty/serial/zs.o, drivers/tty/serial/lpc32xx_hs.o and
drivers/tty/serial/lantiq.o did not compile.

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-27 09:23:36 +01:00
Peter Hurley cab68f8954 serial: Test/disable MSIs if switching from N_PPS
Switching to the N_PPS line discipline may require enabling
modem status interrupts; conversely switching from N_PPS may
require disabling modem status interrupts.

Affected drivers:
8250
amba-pl010
atmel

Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-06 14:57:27 -08:00
Peter Hurley d41510ce2f serial: Take uart port lock for direct *_enable_ms()
Three UART drivers (8250, atmel & amba-pl010) directly call their
enable_ms() method; the uart port lock must be acquired before
any h/w programming.

Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-06 14:57:27 -08:00
Peter Hurley 732a84a037 serial: core: Pass termios to set_ldisc() notifications
UART drivers which enable modem status interrupts when switching
to N_PPS line discipline need to determine if modem status
interrupts should be disabled when switching from N_PPS.
Specifically, the set_ldisc() notification needs to evaluate
UART_ENABLE_MS() which requires termios->c_cflag.

Convert in-tree UART drivers to new interface.

Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-06 14:57:27 -08:00
Fabian Frederick b70e5e9d71 serial: amba-pl010: use container_of to resolve uart_amba_port from uart_port
Use container_of instead of casting first structure member.

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-05 19:20:52 -08:00
Tushar Behera 44acd26063 serial: amba-pl010: Use devres APIs
Migrating to use devres managed APIs devm_kzalloc, devm_ioremap and
devm_clk_get.

Signed-off-by: Tushar Behera <tushar.b@samsung.com>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-09 17:13:54 -07:00
Peter Hurley ef8b9ddcb4 serial: Fix IGNBRK handling
If IGNBRK is set without either BRKINT or PARMRK set, some uart
drivers send a 0x00 byte for BREAK without the TTYBREAK flag to the
line discipline, when it should send either nothing or the TTYBREAK flag
set. This happens because the read_status_mask masks out the BI
condition, which uart_insert_char() then interprets as a normal 0x00 byte.

SUS v3 is clear regarding the meaning of IGNBRK; Section 11.2.2, General
Terminal Interface - Input Modes, states:
  "If IGNBRK is set, a break condition detected on input shall be ignored;
   that is, not put on the input queue and therefore not read by any
   process."

Fix read_status_mask to include the BI bit if IGNBRK is set; the
lsr status retains the BI bit if a BREAK is recv'd, which is
subsequently ignored in uart_insert_char() when masked with the
ignore_status_mask.

Affected drivers:
8250 - all
serial_txx9
mfd
amba-pl010
amba-pl011
atmel_serial
bfin_uart
dz
ip22zilog
max310x
mxs-auart
netx-serial
pnx8xxx_uart
pxa
sb1250-duart
sccnxp
serial_ks8695
sirfsoc_uart
st-asc
vr41xx_siu
zs
sunzilog
fsl_lpuart
sunsab
ucc_uart
bcm63xx_uart
sunsu
efm32-uart
pmac_zilog
mpsc
msm_serial
m32r_sio

Unaffected drivers:
omap-serial
rp2
sa1100
imx
icom

Annotated for fixes:
altera_uart
mcf

Drivers without break detection:
21285
xilinx-uartps
altera_jtaguart
apbuart
arc-uart
clps711x
max3100
uartlite
msm_serial_hs
nwpserial
lantiq
vt8500_serial

Unknown:
samsung
mpc52xx_uart
bfin_sport_uart
cpm_uart/core

Fixes: Bugzilla #71651, '8250_core.c incorrectly handles IGNBRK flag'
Reported-by: Ivan <athlon_@mail.ru>
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-19 13:04:52 -07:00
Ulf Hansson 95468240d8 serial: pl010: Convert to modern PM ops
Convert to modern PM ops and use the SIMPLE_DEV_PM_OPS macro to set up
the PM callbacks.

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-08 17:09:07 -08:00
Michal Simek 7ea816a0c3 serial: Remove unnecessary amba_set_drvdata()
Driver core clears the driver data to NULL after device_release
or on probe failure, so just remove it from here.

Driver core change:
"device-core: Ensure drvdata = NULL when no driver is bound"
(sha1: 0998d06310)

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-03 16:09:47 -07:00
Jingoo Han 574de559c1 serial: use dev_get_platdata()
Use the wrapper function for retrieving the platform data instead of
accessing dev->platform_data directly.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-31 17:56:15 -07:00
Jiri Slaby 2e124b4a39 TTY: switch tty_flip_buffer_push
Now, we start converting tty buffer functions to actually use
tty_port. This will allow us to get rid of the need of tty in many
call sites. Only tty_port will needed and hence no more
tty_port_tty_get in those paths.

Now, the one where most of tty_port_tty_get gets removed:
tty_flip_buffer_push.

IOW we also closed all the races in drivers not using tty_port_tty_get
at all yet.

Also we move tty_flip_buffer_push declaration from include/linux/tty.h
to include/linux/tty_flip.h to all others while we are changing it
anyway.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-15 22:30:15 -08:00
Julia Lawall 1c4c4394a6 drivers/tty/serial/amba-pl0{10,11}.c: use clk_prepare_enable and clk_disable_unprepare
Clk_prepare_enable and clk_disable_unprepare combine clk_prepare and
clk_enable, and clk_disable and clk_unprepare.  The9 make the code more
concise, and ensure that clk_unprepare is called when clk_enable fails.

A simplified version of the semantic patch that introduces calls to these
functions is as follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
expression e;
@@

- clk_prepare(e);
- clk_enable(e);
+ clk_prepare_enable(e);

@@
expression e;
@@

- clk_disable(e);
- clk_unprepare(e);
+ clk_disable_unprepare(e);
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-05 12:33:39 -07:00
Dave Martin a664a119c0 serial: pl010: Enable module alias autogeneration for AMBA drivers
Signed-off-by: Dave Martin <dave.martin@linaro.org>
2011-11-22 10:58:32 +00:00
Russell King 36b8f1e2dc clk: amba-pl010: convert to clk_prepare()/clk_unprepare()
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-09-27 09:25:52 +01:00
Jovi Zhang 99edb3d10a tty: remove invalid location line in file header
remove invalid location line in each file header after location
moved from driver/char to driver/tty

Signed-off-by: Jovi Zhang <bookjovi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-19 16:33:36 -07:00
Russell King aa25afad2c ARM: amba: make probe() functions take const id tables
Make Primecell driver probe functions take a const pointer to their
ID tables.  Drivers should never modify their ID tables in their
probe handler.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-23 16:24:14 +00:00
Greg Kroah-Hartman ab4382d274 tty: move drivers/serial/ to drivers/tty/serial/
The serial drivers are really just tty drivers, so move them to
drivers/tty/ to make things a bit neater overall.

This is part of the tty/serial driver movement proceedure as proposed by
Arnd Bergmann and approved by everyone involved a number of months ago.

Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Rogier Wolff <R.E.Wolff@bitwizard.nl>
Cc: Michael H. Warfield <mhw@wittsend.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-13 12:10:18 -08:00