The files under /sys/fs/UUID/features get out of sync with the actual
incompat bits set for the filesystem if they change after mount. We're
going to sync them and need a helper to do that.
Signed-off-by: David Sterba <dsterba@suse.com>
The incompat bit representing the newly added free space tree feature is
missing. Right now it will be listed only among features supported by
the module, not per-fs.
Signed-off-by: David Sterba <dsterba@suse.com>
As of the 4.3 kernel release, the fitrim ioctl can now discard any region
of a disk that is not allocated to any chunk/block group, including the
first megabyte which is used for our primary superblock and by the boot
loader (grub for example).
Fix this by not allowing to trim/discard any region in the device starting
with an offset not greater than min(alloc_start_mount_option, 1Mb), just
as it was not possible before 4.3.
A reproducer test case for xfstests follows.
seq=`basename $0`
seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
tmp=/tmp/$$
status=1 # failure is the default!
trap "_cleanup; exit \$status" 0 1 2 3 15
_cleanup()
{
cd /
rm -f $tmp.*
}
# get standard environment, filters and checks
. ./common/rc
. ./common/filter
# real QA test starts here
_need_to_be_root
_supported_fs btrfs
_supported_os Linux
_require_scratch
rm -f $seqres.full
_scratch_mkfs >>$seqres.full 2>&1
# Write to the [0, 64Kb[ and [68Kb, 1Mb[ ranges of the device. These ranges are
# reserved for a boot loader to use (GRUB for example) and btrfs should never
# use them - neither for allocating metadata/data nor should trim/discard them.
# The range [64Kb, 68Kb[ is used for the primary superblock of the filesystem.
$XFS_IO_PROG -c "pwrite -S 0xfd 0 64K" $SCRATCH_DEV | _filter_xfs_io
$XFS_IO_PROG -c "pwrite -S 0xfd 68K 956K" $SCRATCH_DEV | _filter_xfs_io
# Now mount the filesystem and perform a fitrim against it.
_scratch_mount
_require_batched_discard $SCRATCH_MNT
$FSTRIM_PROG $SCRATCH_MNT
# Now unmount the filesystem and verify the content of the ranges was not
# modified (no trim/discard happened on them).
_scratch_unmount
echo "Content of the ranges [0, 64Kb] and [68Kb, 1Mb[ after fitrim:"
od -t x1 -N $((64 * 1024)) $SCRATCH_DEV
od -t x1 -j $((68 * 1024)) -N $((956 * 1024)) $SCRATCH_DEV
status=0
exit
Reported-by: Vincent Petry <PVince81@yahoo.fr>
Reported-by: Andrei Borzenkov <arvidjaar@gmail.com>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=109341
Fixes: 499f377f49 (btrfs: iterate over unused chunk space in FITRIM)
Cc: stable@vger.kernel.org # 4.3+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
When converting a filesystem via balance check that metadata mode
is at least as redundant as the data mode. For example give warning
when:
-dconvert=raid1 -mconvert=single
Signed-off-by: Sam Tygier <samtygier@yahoo.co.uk>
[ minor message reformatting ]
Signed-off-by: David Sterba <dsterba@suse.com>
There is one ENOSPC case that's very confusing. There's Available
greater than zero but no file operation succeds (besides removing
files). This happens when the metadata are exhausted and there's no
possibility to allocate another chunk.
In this scenario it's normal that there's still some space in the data
chunk and the calculation in df reflects that in the Avail value.
To at least give some clue about the ENOSPC situation, let statfs report
zero value in Avail, even if there's still data space available.
Current:
/dev/sdb1 4.0G 3.3G 719M 83% /mnt/test
New:
/dev/sdb1 4.0G 3.3G 0 100% /mnt/test
We calculate the remaining metadata space minus global reserve. If this
is (supposedly) smaller than zero, there's no space. But this does not
hold in practice, the exhausted state happens where's still some
positive delta. So we apply some guesswork and compare the delta to a 4M
threshold. (Practically observed delta was 2M.)
We probably cannot calculate the exact threshold value because this
depends on the internal reservations requested by various operations, so
some operations that consume a few metadata will succeed even if the
Avail is zero. But this is better than the other way around.
Signed-off-by: David Sterba <dsterba@suse.com>
We can also preallocate btrfs_path that's used during pending snapshot
creation and avoid another late ENOMEM failure.
Signed-off-by: David Sterba <dsterba@suse.com>
The actual snapshot creation is delayed until transaction commit. If we
cannot get enough memory for the root item there, we have to fail the
whole transaction commit which is bad. So we'll allocate the memory at
the ioctl call and pass it along with the pending_snapshot struct. The
potential ENOMEM will be returned to the caller of snapshot ioctl.
Signed-off-by: David Sterba <dsterba@suse.com>
The values of btrfs_path::locks are 0 to 4, fit into a u8. Let's see:
* overall size of btrfs_path drops down from 136 to 112 (-24 bytes),
* better packing in a slab page +6 objects
* the whole structure now fits to 2 cachelines
* slight decrease in code size:
text data bss dec hex filename
938731 43670 23144 1005545 f57e9 fs/btrfs/btrfs.ko.before
938203 43670 23144 1005017 f55d9 fs/btrfs/btrfs.ko.after
(and the generated assembly does not change much)
The main purpose is to decrease the size of the structure without
affecting performance. The byte access is usually well behaving accross
arches, the locks are not accessed frequently and sometimes just
compared to zero.
Note for further size reduction attempts: the slots could be made u16
but this might generate worse code on some arches (non-byte and non-int
access). Also the range of operations on slots is wider compared to
locks and the potential performance drop should be evaluated first.
Signed-off-by: David Sterba <dsterba@suse.com>
The level is 0..7, we can use smaller type. The size of btrfs_path is now
136 bytes from 144, which is +2 objects that fit into a 4k slab.
Signed-off-by: David Sterba <dsterba@suse.com>
The possible values for reada are all positive and bounded, we can later
save some bytes by storing it in u8.
Signed-off-by: David Sterba <dsterba@suse.com>
Replace the integers by enums for better readability. The value 2 does
not have any meaning since a717531942
"Btrfs: do less aggressive btree readahead" (2009-01-22).
Signed-off-by: David Sterba <dsterba@suse.com>
There are a few statically initialized arrays that can be made const.
The remaining (like file_system_type, sysfs attributes or prop handlers)
do not allow that due to type mismatch when passed to the APIs or
because the structures are modified through other members.
Signed-off-by: David Sterba <dsterba@suse.com>
Preparatory work for making btrfs_free_space_op constant. In
test_steal_space_from_bitmap_to_extent, we substitute use_bitmap with
own version thus preventing constification. We can rework it so we
replace the whole structure with the correct function pointers.
Signed-off-by: David Sterba <dsterba@suse.com>
Use list_for_each_entry*() to simplify the code.
Signed-off-by: Geliang Tang <geliangtang@163.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Use list_for_each_entry_safe() instead of list_for_each_safe() to
simplify the code.
Signed-off-by: Geliang Tang <geliangtang@163.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Use list_for_each_entry*() instead of list_for_each*() to simplify
the code.
Signed-off-by: Geliang Tang <geliangtang@163.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We use many constants to represent size and offset value. And to make
code readable we use '256 * 1024 * 1024' instead of '268435456' to
represent '256MB'. However we can make far more readable with 'SZ_256MB'
which is defined in the 'linux/sizes.h'.
So this patch replaces 'xxx * 1024 * 1024' kind of expression with
single 'SZ_xxxMB' if 'xxx' is a power of 2 then 'xxx * SZ_1M' if 'xxx' is
not a power of 2. And I haven't touched to '4096' & '8192' because it's
more intuitive than 'SZ_4KB' & 'SZ_8KB'.
Signed-off-by: Byongho Lee <bhlee.kernel@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
It's slightly cleaner to zero-out the delayed node upon allocation
than to do it by hand in btrfs_init_delayed_node() for a few members
Signed-off-by: Alexandru Moise <00moses.alexander00@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Alexandru Moise <00moses.alexander00@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Conform to __btrfs_fs_incompat() cast-to-bool (!!) by explicitly
returning boolean not int.
Signed-off-by: Alexandru Moise <00moses.alexander00@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The inode argument is never used from the beginning, so remove it.
Signed-off-by: Byongho Lee <bhlee.kernel@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Although we prefer to use separate caches for various structs, it seems
better not to do that for struct btrfs_delalloc_work. Objects of this
type are allocated rarely, when transaction commit calls
btrfs_start_delalloc_roots, requesting delayed iputs.
The objects are temporary (with some IO involved) but still allocated
and freed within __start_delalloc_inodes. Memory allocation failure is
handled.
The slab cache is empty most of the time (observed on several systems),
so if we need to allocate a new slab object, the first one has to
allocate a full page. In a potential case of low memory conditions this
might fail with higher probability compared to using the generic slab
caches.
Signed-off-by: David Sterba <dsterba@suse.com>
We can handle the special case of num_stripes == 0 directly inside
btrfs_read_sys_array. The BUG_ON in btrfs_chunk_item_size is there to
catch other unhandled cases where we fail to validate external data.
A crafted or corrupted image crashes at mount time:
BTRFS: device fsid 9006933e-2a9a-44f0-917f-514252aeec2c devid 1 transid 7 /dev/loop0
BTRFS info (device loop0): disk space caching is enabled
BUG: failure at fs/btrfs/ctree.h:337/btrfs_chunk_item_size()!
Kernel panic - not syncing: BUG!
CPU: 0 PID: 313 Comm: mount Not tainted 4.2.5-00657-ge047887-dirty #25
Stack:
637af890 60062489 602aeb2e 604192ba
60387961 00000011 637af8a0 6038a835
637af9c0 6038776b 634ef32b 00000000
Call Trace:
[<6001c86d>] show_stack+0xfe/0x15b
[<6038a835>] dump_stack+0x2a/0x2c
[<6038776b>] panic+0x13e/0x2b3
[<6020f099>] btrfs_read_sys_array+0x25d/0x2ff
[<601cfbbe>] open_ctree+0x192d/0x27af
[<6019c2c1>] btrfs_mount+0x8f5/0xb9a
[<600bc9a7>] mount_fs+0x11/0xf3
[<600d5167>] vfs_kern_mount+0x75/0x11a
[<6019bcb0>] btrfs_mount+0x2e4/0xb9a
[<600bc9a7>] mount_fs+0x11/0xf3
[<600d5167>] vfs_kern_mount+0x75/0x11a
[<600d710b>] do_mount+0xa35/0xbc9
[<600d7557>] SyS_mount+0x95/0xc8
[<6001e884>] handle_syscall+0x6b/0x8e
Reported-by: Jiri Slaby <jslaby@suse.com>
Reported-by: Vegard Nossum <vegard.nossum@oracle.com>
CC: stable@vger.kernel.org # 3.19+
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_delayed_extent_op can be packed in a better way, it's 40 bytes now
and has 8 unused bytes. Reducing the level type to u8 makes it possible
to squeeze it to the padding byte after key. The bitfields were switched
to bool as there's space to store the full byte without increasing the
whole structure, besides that the generated assembly is smaller.
struct btrfs_delayed_extent_op {
struct btrfs_disk_key key; /* 0 17 */
u8 level; /* 17 1 */
bool update_key; /* 18 1 */
bool update_flags; /* 19 1 */
bool is_data; /* 20 1 */
/* XXX 3 bytes hole, try to pack */
u64 flags_to_set; /* 24 8 */
/* size: 32, cachelines: 1, members: 6 */
/* sum members: 29, holes: 1, sum holes: 3 */
/* last cacheline: 32 bytes */
};
The final size is 32 bytes which gives +26 object per slab page.
text data bss dec hex filename
938811 43670 23144 1005625 f5839 fs/btrfs/btrfs.ko.before
938747 43670 23144 1005561 f57f9 fs/btrfs/btrfs.ko.after
Signed-off-by: David Sterba <dsterba@suse.com>
Inodes for delayed iput allocate a trivial helper structure, let's place
the list hook directly into the inode and save a kmalloc (killing a
__GFP_NOFAIL as a bonus) at the cost of increasing size of btrfs_inode.
The inode can be put into the delayed_iputs list more than once and we
have to keep the count. This means we can't use the list_splice to
process a bunch of inodes because we'd lost track of the count if the
inode is put into the delayed iputs again while it's processed.
Signed-off-by: David Sterba <dsterba@suse.com>
Since we will add support for -d dup for non-mixed filesystem,
kernel need to support converting to this raid-type.
This patch remove limitation of above case.
Tested by following script:
(combination of dup conversion with fsck):
export TEST_DEV='/dev/vdc'
export TEST_DIR='/var/ltf/tester/mnt'
do_dup_test()
{
local m_from="$1"
local d_from="$2"
local m_to="$3"
local d_to="$4"
echo "Convert from -m $m_from -d $d_from to -m $m_to -d $d_to"
umount "$TEST_DIR" &>/dev/null
./mkfs.btrfs -f -m "$m_from" -d "$d_from" "$TEST_DEV" >/dev/null || return 1
mount "$TEST_DEV" "$TEST_DIR" || return 1
cp -a /sbin/* "$TEST_DIR"
[[ "$m_from" != "$m_to" ]] && {
./btrfs balance start -f -mconvert="$m_to" "$TEST_DIR" || return 1
}
[[ "$d_from" != "$d_to" ]] && {
local opt=()
[[ "$d_to" == single ]] && opt+=("-f")
./btrfs balance start "${opt[@]}" -dconvert="$d_to" "$TEST_DIR" || return 1
}
umount "$TEST_DIR" || return 1
./btrfsck "$TEST_DEV" || return 1
echo
return 0
}
test_all()
{
for m_from in single dup; do
for d_from in single dup; do
for m_to in single dup; do
for d_to in single dup; do
do_dup_test "$m_from" "$d_from" "$m_to" "$d_to" || return 1
done
done
done
done
}
test_all
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We hit this panic on a few of our boxes this week where we have an
ordered_extent with an NULL inode. We do an igrab() of the inode in writepages,
but weren't doing it in writepage which can be called directly from the VM on
dirty pages. If the inode has been unlinked then we could have I_FREEING set
which means igrab() would return NULL and we get this panic. Fix this by trying
to igrab in btrfs_writepage, and if it returns NULL then just redirty the page
and return AOP_WRITEPAGE_ACTIVATE; so the VM knows it wasn't successful. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Looks like oversight, call brelse() when checksum fails. Further down the
code, in the non error path, we do call brelse() and so we don't see
brelse() in the goto error paths.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If we failed to create a hard link we were not always releasing the
the transaction handle we got before, resulting in a memory leak and
preventing any other tasks from being able to commit the current
transaction.
Fix this by always releasing our transaction handle.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
We weren't accounting for the insertion of an inline extent item for the
symlink inode nor that we need to update the parent inode item (through
the call to btrfs_add_nondir()). So fix this by including two more
transaction units.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
When we are creating a symlink we might fail with an error after we
created its inode and added the corresponding directory indexes to its
parent inode. In this case we end up never removing the directory indexes
because the inode eviction handler, called for our symlink inode on the
final iput(), only removes items associated with the symlink inode and
not with the parent inode.
Example:
$ mkfs.btrfs -f /dev/sdi
$ mount /dev/sdi /mnt
$ touch /mnt/foo
$ ln -s /mnt/foo /mnt/bar
ln: failed to create symbolic link ‘bar’: Cannot allocate memory
$ umount /mnt
$ btrfsck /dev/sdi
Checking filesystem on /dev/sdi
UUID: d5acb5ba-31bd-42da-b456-89dca2e716e1
checking extents
checking free space cache
checking fs roots
root 5 inode 258 errors 2001, no inode item, link count wrong
unresolved ref dir 256 index 3 namelen 3 name bar filetype 7 errors 4, no inode ref
found 131073 bytes used err is 1
total csum bytes: 0
total tree bytes: 131072
total fs tree bytes: 32768
total extent tree bytes: 16384
btree space waste bytes: 124305
file data blocks allocated: 262144
referenced 262144
btrfs-progs v4.2.3
So fix this by adding the directory index entries as the very last
step of symlink creation.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
When a symlink is successfully created it always has an inline extent
containing the source path. However if an error happens when creating
the symlink, we can leave in the subvolume's tree a symlink inode without
any such inline extent item - this happens if after btrfs_symlink() calls
btrfs_end_transaction() and before it calls the inode eviction handler
(through the final iput() call), the transaction gets committed and a
crash happens before the eviction handler gets called, or if a snapshot
of the subvolume is made before the eviction handler gets called. Sadly
we can't just avoid this by making btrfs_symlink() call
btrfs_end_transaction() after it calls the eviction handler, because the
later can commit the current transaction before it removes any items from
the subvolume tree (if it encounters ENOSPC errors while reserving space
for removing all the items).
So make send fail more gracefully, with an -EIO error, and print a
message to dmesg/syslog informing that there's an empty symlink inode,
so that the user can delete the empty symlink or do something else
about it.
Reported-by: Stephen R. van den Berg <srb@cuci.nl>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
While running a stress test I ran into the following trace/transaction
abort:
[471626.672243] ------------[ cut here ]------------
[471626.673322] WARNING: CPU: 9 PID: 19107 at fs/btrfs/extent-tree.c:3740 btrfs_write_dirty_block_groups+0x17c/0x214 [btrfs]()
[471626.675492] BTRFS: Transaction aborted (error -2)
[471626.676748] Modules linked in: btrfs dm_flakey dm_mod crc32c_generic xor raid6_pq nfsd auth_rpcgss oid_registry nfs_acl nfs lockd grace fscache sunrpc loop fuse parport_pc i2c_piix
[471626.688802] CPU: 14 PID: 19107 Comm: fsstress Tainted: G W 4.3.0-rc5-btrfs-next-17+ #1
[471626.690148] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.8.1-0-g4adadbd-20150316_085822-nilsson.home.kraxel.org 04/01/2014
[471626.691901] 0000000000000000 ffff880016037cf0 ffffffff812566f4 ffff880016037d38
[471626.695009] ffff880016037d28 ffffffff8104d0a6 ffffffffa040c84e 00000000fffffffe
[471626.697490] ffff88011fe855f8 ffff88000c484cb0 ffff88000d195000 ffff880016037d90
[471626.699201] Call Trace:
[471626.699804] [<ffffffff812566f4>] dump_stack+0x4e/0x79
[471626.701049] [<ffffffff8104d0a6>] warn_slowpath_common+0x9f/0xb8
[471626.702542] [<ffffffffa040c84e>] ? btrfs_write_dirty_block_groups+0x17c/0x214 [btrfs]
[471626.704326] [<ffffffff8104d107>] warn_slowpath_fmt+0x48/0x50
[471626.705636] [<ffffffffa0403717>] ? write_one_cache_group.isra.32+0x77/0x82 [btrfs]
[471626.707048] [<ffffffffa040c84e>] btrfs_write_dirty_block_groups+0x17c/0x214 [btrfs]
[471626.708616] [<ffffffffa048a50a>] commit_cowonly_roots+0x1d7/0x25a [btrfs]
[471626.709950] [<ffffffffa041e34a>] btrfs_commit_transaction+0x4c4/0x991 [btrfs]
[471626.711286] [<ffffffff81081c61>] ? signal_pending_state+0x31/0x31
[471626.712611] [<ffffffffa03f6df4>] btrfs_sync_fs+0x145/0x1ad [btrfs]
[471626.715610] [<ffffffff811962a2>] ? SyS_tee+0x226/0x226
[471626.716718] [<ffffffff811962c2>] sync_fs_one_sb+0x20/0x22
[471626.717672] [<ffffffff8116fc01>] iterate_supers+0x75/0xc2
[471626.718800] [<ffffffff8119669a>] sys_sync+0x52/0x80
[471626.719990] [<ffffffff8147cd97>] entry_SYSCALL_64_fastpath+0x12/0x6f
[471626.721835] ---[ end trace baf57f43d76693f4 ]---
[471626.722954] BTRFS: error (device sdc) in btrfs_write_dirty_block_groups:3740: errno=-2 No such entry
This is a very rare situation and it happened due to a race between a free
space endio worker and writing the space caches for dirty block groups at
a transaction's commit critical section. The steps leading to this are:
1) A task calls btrfs_commit_transaction() and starts the writeout of the
space caches for all currently dirty block groups (i.e. it calls
btrfs_start_dirty_block_groups());
2) The previous step starts writeback for space caches;
3) When the writeback finishes it queues jobs for free space endio work
queue (fs_info->endio_freespace_worker) that execute
btrfs_finish_ordered_io();
4) The task committing the transaction sets the transaction's state
to TRANS_STATE_COMMIT_DOING and shortly after calls
btrfs_write_dirty_block_groups();
5) A free space endio job joins the transaction, through
btrfs_join_transaction_nolock(), and updates a free space inode item
in the root tree through btrfs_update_inode_fallback();
6) Updating the free space inode item resulted in COWing one or more
nodes/leaves of the root tree, and that resulted in creating a new
metadata block group, which gets added to the transaction's list
of dirty block groups (this is a very rare case);
7) The free space endio job has not released yet its transaction handle
at this point, so the new metadata block group was not yet fully
created (didn't go through btrfs_create_pending_block_groups() yet);
8) The transaction commit task sees the new metadata block group in
the transaction's list of dirty block groups and processes it.
When it attempts to update the block group's block group item in
the extent tree, through write_one_cache_group(), it isn't able
to find it and aborts the transaction with error -ENOENT - this
is because the free space endio job hasn't yet released its
transaction handle (which calls btrfs_create_pending_block_groups())
and therefore the block group item was not yet added to the extent
tree.
Fix this waiting for free space endio jobs if we fail to find a block
group item in the extent tree and then retry once updating the block
group item.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
This is a short term solution to make sure btrfs_run_delayed_refs()
doesn't change the extent tree while we are scanning it to create the
free space tree.
Longer term we need to synchronize scanning the block groups one by one,
similar to what happens during a balance.
Signed-off-by: Chris Mason <clm@fb.com>
David Sterba
Chris Mason
Filipe Manana
Sam Tygier
Geliang Tang
Byongho Lee
Alexandru Moise
David Sterba
Zhao Lei
Josef Bacik
Anand Jain