When enable the config item "CONFIG_ARM64_64K_PAGES", the size of PAGE_SIZE
is 65536(64K). But the type of length is u16, it will overflow. So change it
to u32.
Signed-off-by: Tan Xiaojun <tanxiaojun@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The NSP default buffer is a piece of NFP memory where additional
command data can be placed. Its format has been copied from
host buffer, but the PCIe selection bits do not make sense in
this case. If those get masked out from a NFP address - writes
to random place in the chip memory may be issued and crash the
device.
Even in the general NSP buffer case, it doesn't make sense to have the
PCIe selection bits there anymore. These are unused at the moment, and
when it becomes necessary, the PCIe selection bits should rather be
moved to another register to utilise more bits for the buffer address.
This has never been an issue because the buffer used to be
allocated in memory with less-than-38-bit-long address but that
is about to change.
Fixes: 1a64821c6a ("nfp: add support for service processor access")
Signed-off-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When using wicked with a lan78xx device attached to the system, we
end up with ethtool commands issued on the device before an ifup
got issued. That lead to the following crash:
Unable to handle kernel NULL pointer dereference at virtual address 0000039c
pgd = ffff800035b30000
[0000039c] *pgd=0000000000000000
Internal error: Oops: 96000004 [#1] SMP
Modules linked in: [...]
Supported: Yes
CPU: 3 PID: 638 Comm: wickedd Tainted: G E 4.12.14-0-default #1
Hardware name: raspberrypi rpi/rpi, BIOS 2018.03-rc2 02/21/2018
task: ffff800035e74180 task.stack: ffff800036718000
PC is at phy_ethtool_ksettings_get+0x20/0x98
LR is at lan78xx_get_link_ksettings+0x44/0x60 [lan78xx]
pc : [<ffff0000086f7f30>] lr : [<ffff000000dcca84>] pstate: 20000005
sp : ffff80003671bb20
x29: ffff80003671bb20 x28: ffff800035e74180
x27: ffff000008912000 x26: 000000000000001d
x25: 0000000000000124 x24: ffff000008f74d00
x23: 0000004000114809 x22: 0000000000000000
x21: ffff80003671bbd0 x20: 0000000000000000
x19: ffff80003671bbd0 x18: 000000000000040d
x17: 0000000000000001 x16: 0000000000000000
x15: 0000000000000000 x14: ffffffffffffffff
x13: 0000000000000000 x12: 0000000000000020
x11: 0101010101010101 x10: fefefefefefefeff
x9 : 7f7f7f7f7f7f7f7f x8 : fefefeff31677364
x7 : 0000000080808080 x6 : ffff80003671bc9c
x5 : ffff80003671b9f8 x4 : ffff80002c296190
x3 : 0000000000000000 x2 : 0000000000000000
x1 : ffff80003671bbd0 x0 : ffff80003671bc00
Process wickedd (pid: 638, stack limit = 0xffff800036718000)
Call trace:
Exception stack(0xffff80003671b9e0 to 0xffff80003671bb20)
b9e0: ffff80003671bc00 ffff80003671bbd0 0000000000000000 0000000000000000
ba00: ffff80002c296190 ffff80003671b9f8 ffff80003671bc9c 0000000080808080
ba20: fefefeff31677364 7f7f7f7f7f7f7f7f fefefefefefefeff 0101010101010101
ba40: 0000000000000020 0000000000000000 ffffffffffffffff 0000000000000000
ba60: 0000000000000000 0000000000000001 000000000000040d ffff80003671bbd0
ba80: 0000000000000000 ffff80003671bbd0 0000000000000000 0000004000114809
baa0: ffff000008f74d00 0000000000000124 000000000000001d ffff000008912000
bac0: ffff800035e74180 ffff80003671bb20 ffff000000dcca84 ffff80003671bb20
bae0: ffff0000086f7f30 0000000020000005 ffff80002c296000 ffff800035223900
bb00: 0000ffffffffffff 0000000000000000 ffff80003671bb20 ffff0000086f7f30
[<ffff0000086f7f30>] phy_ethtool_ksettings_get+0x20/0x98
[<ffff000000dcca84>] lan78xx_get_link_ksettings+0x44/0x60 [lan78xx]
[<ffff0000087cbc40>] ethtool_get_settings+0x68/0x210
[<ffff0000087cc0d4>] dev_ethtool+0x214/0x2180
[<ffff0000087e5008>] dev_ioctl+0x400/0x630
[<ffff00000879dd00>] sock_do_ioctl+0x70/0x88
[<ffff00000879f5f8>] sock_ioctl+0x208/0x368
[<ffff0000082cde10>] do_vfs_ioctl+0xb0/0x848
[<ffff0000082ce634>] SyS_ioctl+0x8c/0xa8
Exception stack(0xffff80003671bec0 to 0xffff80003671c000)
bec0: 0000000000000009 0000000000008946 0000fffff4e841d0 0000aa0032687465
bee0: 0000aaaafa2319d4 0000fffff4e841d4 0000000032687465 0000000032687465
bf00: 000000000000001d 7f7fff7f7f7f7f7f 72606b622e71ff4c 7f7f7f7f7f7f7f7f
bf20: 0101010101010101 0000000000000020 ffffffffffffffff 0000ffff7f510c68
bf40: 0000ffff7f6a9d18 0000ffff7f44ce30 000000000000040d 0000ffff7f6f98f0
bf60: 0000fffff4e842c0 0000000000000001 0000aaaafa2c2e00 0000ffff7f6ab000
bf80: 0000fffff4e842c0 0000ffff7f62a000 0000aaaafa2b9f20 0000aaaafa2c2e00
bfa0: 0000fffff4e84818 0000fffff4e841a0 0000ffff7f5ad0cc 0000fffff4e841a0
bfc0: 0000ffff7f44ce3c 0000000080000000 0000000000000009 000000000000001d
bfe0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
The culprit is quite simple: The driver tries to access the phy left and right,
but only actually has a working reference to it when the device is up.
The fix thus is quite simple too: Get a reference to the phy on probe already
and keep it even when the device is going down.
With this patch applied, I can successfully run wicked on my system and bring
the interface up and down as many times as I want, without getting NULL pointer
dereferences in between.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
We are currently counting packets with CHECKSUM_COMPLETE as
"hw_rx_csum_ok". This is confusing. Add a new counter.
To make sure it fits in the same cacheline move the less used
error counter to a different location.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When an item of struct tipc_subscription is created, we fail to
initialize the two lists aggregated into the struct. This has so far
never been a problem, since the items are just added to a root
object by list_add(), which does not require the addee list to be
pre-initialized. However, syzbot is provoking situations where this
addition fails, whereupon the attempted removal if the item from
the list causes a crash.
This problem seems to always have been around, despite that the code
for creating this object was rewritten in commit 242e82cc95 ("tipc:
collapse subscription creation functions"), which is still in net-next.
We fix this for that commit by initializing the two lists properly.
Fixes: 242e82cc95 ("tipc: collapse subscription creation functions")
Reported-by: syzbot+0bb443b74ce09197e970@syzkaller.appspotmail.com
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexey Kodanev says:
====================
ipv6: udp: set dst cache for a connected sk if current not valid
A new RTF_CACHE route can be created with the socket's dst cache
update between the below calls in udpv6_sendmsg(), when datagram
sending results to ICMPV6_PKT_TOOBIG error:
dst = ip6_sk_dst_lookup_flow(...)
...
release_dst:
if (dst) {
if (connected) {
ip6_dst_store(sk, dst)
Therefore, the new socket's dst cache reset to the old one on
"release_dst:".
The first three patches prepare the code to store dst cache
with ip6_sk_dst_lookup_flow():
* the first patch adds ip6_sk_dst_store_flow() function with
commonly used source and destiantion addresses checks using
the flow information.
* the second patch adds a new argument to ip6_sk_dst_lookup_flow()
and ability to store dst in the socket's cache. Also, the two
users of the function are updated without enabling the new
behavior: pingv6_sendmsg() and udpv6_sendmsg().
* the third patch makes 'connected' variable in udpv6_sendmsg()
to be consistent with ip6_sk_dst_store_flow(), changes its type
from int to bool.
The last patch contains the actual fix that removes sk dst cache
update in the end of udpv6_sendmsg(), and allows to do it in
ip6_sk_dst_lookup_flow().
v6: * use bool type for a new parameter in ip_sk_dst_lookup_flow()
* add one more patch to convert 'connected' variable in
udpv6_sendmsg() from int to bool type. If it shouldn't be
here I will resend it when the net-next is opened.
v5: * relocate ip6_sk_dst_store_flow() to net/ipv6/route.c and
rename ip6_dst_store_flow() to ip6_sk_dst_store_flow() as
suggested by Martin
v4: * fix the error in the build of ip_dst_store_flow() reported by
kbuild test robot due to missing checks for CONFIG_IPV6: add
new function to ip6_output.c instead of ip6_route.h
* add 'const' to struct flowi6 in ip6_dst_store_flow()
* minor commit messages fixes
v3: * instead of moving ip6_dst_store() above udp_v6_send_skb(),
update socket's dst cache inside ip6_sk_dst_lookup_flow()
if the current one is invalid
* the issue not reproduced in 4.1, but starting from 4.2. Add
one more 'Fixes:' commit that creates new RTF_CACHE route.
Though, it is also mentioned in the first one
====================
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A new RTF_CACHE route can be created between ip6_sk_dst_lookup_flow()
and ip6_dst_store() calls in udpv6_sendmsg(), when datagram sending
results to ICMPV6_PKT_TOOBIG error:
udp_v6_send_skb(), for example with vti6 tunnel:
vti6_xmit(), get ICMPV6_PKT_TOOBIG error
skb_dst_update_pmtu(), can create a RTF_CACHE clone
icmpv6_send()
...
udpv6_err()
ip6_sk_update_pmtu()
ip6_update_pmtu(), can create a RTF_CACHE clone
...
ip6_datagram_dst_update()
ip6_dst_store()
And after commit 33c162a980 ("ipv6: datagram: Update dst cache of
a connected datagram sk during pmtu update"), the UDPv6 error handler
can update socket's dst cache, but it can happen before the update in
the end of udpv6_sendmsg(), preventing getting the new dst cache on
the next udpv6_sendmsg() calls.
In order to fix it, save dst in a connected socket only if the current
socket's dst cache is invalid.
The previous patch prepared ip6_sk_dst_lookup_flow() to do that with
the new argument, and this patch enables it in udpv6_sendmsg().
Fixes: 33c162a980 ("ipv6: datagram: Update dst cache of a connected datagram sk during pmtu update")
Fixes: 45e4fd2668 ("ipv6: Only create RTF_CACHE routes after encountering pmtu exception")
Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This should make it consistent with ip6_sk_dst_lookup_flow()
that is accepting the new 'connected' parameter of type bool.
Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add 'connected' parameter to ip6_sk_dst_lookup_flow() and update
the cache only if ip6_sk_dst_check() returns NULL and a socket
is connected.
The function is used as before, the new behavior for UDP sockets
in udpv6_sendmsg() will be enabled in the next patch.
Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move commonly used pattern of ip6_dst_store() usage to a separate
function - ip6_sk_dst_store_flow(), which will check the addresses
for equality using the flow information, before saving them.
There is no functional changes in this patch. In addition, it will
be used in the next patch, in ip6_sk_dst_lookup_flow().
Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a thermal monitoring device for the Marvell 88x3310, which updates
once a second. We also need to hook into the suspend/resume mechanism
to ensure that the thermal monitoring is reconfigured when we resume.
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
We would be passing 0 instead of NULL as the rsp argument to
mt7530_fdb_cmd(), fix that.
Fixes: b8f126a8d5 ("net-next: dsa: add dsa support for Mediatek MT7530 switch")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
sparse complains about the following warnings:
drivers/net/dsa/b53/b53_mmap.c:33:31: warning: incorrect type in
initializer (different address spaces)
drivers/net/dsa/b53/b53_mmap.c:33:31: expected unsigned char
[noderef] [usertype] <asn:2>*regs
drivers/net/dsa/b53/b53_mmap.c:33:31: got void *priv
and indeed, while what we are doing is functional, we are dereferencing
a void * pointer into a void __iomem * which is not great. Just use the
defined b53_mmap_priv structure which holds our register base and use
that.
Fixes: 967dd82ffc ("net: dsa: b53: Add support for Broadcom RoboSwitch")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After commit 581319c586 ("net/socket: use per af lockdep classes for sk queues")
sock queue locks now have per-af lockdep classes, including unix socket.
It is no longer necessary to workaround it.
I noticed this while looking at a syzbot deadlock report, this patch
itself doesn't fix it (this is why I don't add Reported-by).
Fixes: 581319c586 ("net/socket: use per af lockdep classes for sk queues")
Cc: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli says:
====================
net: Broadcom drivers sparse fixes
This patch series fixes the same warning reported by sparse in bcmsysport and
bcmgenet in the code that deals with inserting the TX checksum pointers:
drivers/net/ethernet/broadcom/bcmsysport.c:1155:26: warning: cast from restricted __be16
drivers/net/ethernet/broadcom/bcmsysport.c:1155:26: warning: incorrect type in argument 1 (different base types)
drivers/net/ethernet/broadcom/bcmsysport.c:1155:26: expected unsigned short [unsigned] [usertype] val
drivers/net/ethernet/broadcom/bcmsysport.c:1155:26: got restricted __be16 [usertype] protocol
This patch fixes both issues by using the same construct and not swapping
skb->protocol but instead the values we are checking against.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
skb->protocol is a __be16 which we would be calling htons() against,
while this is not wrong per-se as it correctly results in swapping the
value on LE hosts, this still upsets sparse. Adopt a similar pattern to
what other drivers do and just assign ip_ver to skb->protocol, and then
use htons() against the different constants such that the compiler can
resolve the values at build time.
Fixes: 80105befdb ("net: systemport: add Broadcom SYSTEMPORT Ethernet MAC driver")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
skb->protocol is a __be16 which we would be calling htons() against,
while this is not wrong per-se as it correctly results in swapping the
value on LE hosts, this still upsets sparse. Adopt a similar pattern to
what other drivers do and just assign ip_ver to skb->protocol, and then
use htons() against the different constants such that the compiler can
resolve the values at build time.
Fixes: 1c1008c793 ("net: bcmgenet: add main driver file")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
By analogy with other Rx implementations, RxRPC packet types 9, 10 and 11
should just be discarded rather than being aborted like other undefined
packet types.
Reported-by: Jeffrey Altman <jaltman@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
arm has an optional MULTI_IRQ_HANDLER, which openrisc copied but didn't
make optional. The multi irq handler infrastructure has been copied to
generic code selectable with a new config symbol. That symbol can be
selected by randconfig builds and can cause build breakage.
Introduce CONFIG_MULTI_IRQ_HANDLER as an intermediate step which prevents
the core config symbol from being selected. The openrisc local config
symbol will be removed once openrisc gets converted to the generic code.
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Link: https://lkml.kernel.org/r/20180404043130.31277-3-palmer@sifive.com
arm has an optional MULTI_IRQ_HANDLER, which arm64 copied but didn't make
optional. The multi irq handler infrastructure has been copied to generic
code selectable with a new config symbol. That symbol can be selected by
randconfig builds and can cause build breakage.
Introduce CONFIG_MULTI_IRQ_HANDLER as an intermediate step which prevents
the core config symbol from being selected. The arm64 local config symbol
will be removed once arm64 gets converted to the generic code.
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Link: https://lkml.kernel.org/r/20180404043130.31277-2-palmer@sifive.com
These config switches enable the same code in the core and the not yet
converted architecture code. They can be selected both by randconfig builds
and cause linker error because the same symbols are defined twice.
Make the new GENERIC_IRQ_MULTI_HANDLER depend on !MULTI_IRQ_HANDLER to
prevent that. The dependency will be removed once all architectures are
converted over.
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Link: https://lkml.kernel.org/r/20180404043130.31277-4-palmer@sifive.com
Pull namespace updates from Eric Biederman:
"There was a lot of work this cycle fixing bugs that were discovered
after the merge window and getting everything ready where we can
reasonably support fully unprivileged fuse. The bug fixes you already
have and much of the unprivileged fuse work is coming in via other
trees.
Still left for fully unprivileged fuse is figuring out how to cleanly
handle .set_acl and .get_acl in the legacy case, and properly handling
of evm xattrs on unprivileged mounts.
Included in the tree is a cleanup from Alexely that replaced a linked
list with a statically allocated fix sized array for the pid caches,
which simplifies and speeds things up.
Then there is are some cleanups and fixes for the ipc namespace. The
motivation was that in reviewing other code it was discovered that
access ipc objects from different pid namespaces recorded pids in such
a way that when asked the wrong pids were returned. In the worst case
there has been a measured 30% performance impact for sysvipc
semaphores. Other test cases showed no measurable performance impact.
Manfred Spraul and Davidlohr Bueso who tend to work on sysvipc
performance both gave the nod that this is good enough.
Casey Schaufler and James Morris have given their approval to the LSM
side of the changes.
I simplified the types and the code dealing with sysvipc to pass just
kern_ipc_perm for all three types of ipc. Which reduced the header
dependencies throughout the kernel and simplified the lsm code.
Which let me work on the pid fixes without having to worry about
trivial changes causing complete kernel recompiles"
* 'userns-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
ipc/shm: Fix pid freeing.
ipc/shm: fix up for struct file no longer being available in shm.h
ipc/smack: Tidy up from the change in type of the ipc security hooks
ipc: Directly call the security hook in ipc_ops.associate
ipc/sem: Fix semctl(..., GETPID, ...) between pid namespaces
ipc/msg: Fix msgctl(..., IPC_STAT, ...) between pid namespaces
ipc/shm: Fix shmctl(..., IPC_STAT, ...) between pid namespaces.
ipc/util: Helpers for making the sysvipc operations pid namespace aware
ipc: Move IPCMNI from include/ipc.h into ipc/util.h
msg: Move struct msg_queue into ipc/msg.c
shm: Move struct shmid_kernel into ipc/shm.c
sem: Move struct sem and struct sem_array into ipc/sem.c
msg/security: Pass kern_ipc_perm not msg_queue into the msg_queue security hooks
shm/security: Pass kern_ipc_perm not shmid_kernel into the shm security hooks
sem/security: Pass kern_ipc_perm not sem_array into the sem security hooks
pidns: simpler allocation of pid_* caches
Pull workqueue updates from Tejun Heo:
"rcu_work addition and a couple trivial changes"
* 'for-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: remove the comment about the old manager_arb mutex
workqueue: fix the comments of nr_idle
fs/aio: Use rcu_work instead of explicit rcu and work item
cgroup: Use rcu_work instead of explicit rcu and work item
RCU, workqueue: Implement rcu_work
Pull libata updates from Tejun Heo:
"Nothing too interesting.
The biggest change is refcnting fix for ata_host - the bug is recent
and can only be triggered on controller hotplug, so very few are
hitting it.
There also are a number of trivial license / error message changes and
some hardware specific changes"
* 'for-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: (23 commits)
ahci: imx: add the imx8qm ahci sata support
libata: ensure host is free'd on error exit paths
ata: ahci-platform: add reset control support
ahci: imx: fix the build warning
ata: add Amiga Gayle PATA controller driver
ahci: imx: add the imx6qp ahci sata support
ata: change Tegra124 to Tegra
ata: ahci_tegra: Add AHCI support for Tegra210
ata: ahci_tegra: disable DIPM
ata: ahci_tegra: disable devslp for Tegra124
ata: ahci_tegra: initialize regulators from soc struct
ata: ahci_tegra: Update initialization sequence
dt-bindings: Tegra210: add binding documentation
libata: add refcounting to ata_host
pata_bk3710: clarify license version and use SPDX header
pata_falcon: clarify license version and use SPDX header
pata_it821x: Delete an error message for a failed memory allocation in it821x_firmware_command()
pata_macio: Delete an error message for a failed memory allocation in two functions
pata_mpc52xx: Delete an error message for a failed memory allocation in mpc52xx_ata_probe()
sata_dwc_460ex: Delete an error message for a failed memory allocation in sata_dwc_port_start()
...
Somewhat nasty merge due to conflicts between "33b28357dd00 scsi:
qla2xxx: Fix Async GPN_FT for FCP and FC-NVMe scan" and "2b5b96473efc
scsi: qla2xxx: Fix FC-NVMe LUN discovery"
Merge is non-trivial and has been verified by Qlogic (Cavium)
Signed-off-by: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
-----BEGIN PGP SIGNATURE-----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=bzhS
-----END PGP SIGNATURE-----
Merge tag 'media/v4.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- new CEC pin injection code for testing purposes
- DVB frontend cxd2099 promoted from staging
- new platform driver for Sony cxd2880 DVB devices
- new sensor drivers: mt9t112, ov2685, ov5695, ov772x, tda1997x,
tw9910.c
- removal of unused cx18 and ivtv alsa mixers
- the reneseas-ceu driver doesn't depend on soc_camera anymore and
moved from staging
- removed the mantis_vp3028 driver, unused since 2009
- s5p-mfc: add support for version 10 of the MSP
- added a decoder for imon protocol
- atomisp: lots of cleanups
- imx074 and mt9t031: don't depend on soc_camera anymore, being
promoted from staging
- added helper functions to better support DVB I2C binding
- lots of driver improvements and cleanups
* tag 'media/v4.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (438 commits)
media: v4l2-ioctl: rename a temp var that stores _IOC_SIZE(cmd)
media: fimc-capture: get rid of two warnings
media: dvb-usb-v2: fix a missing dependency of I2C_MUX
media: uvc: to the right check at uvc_ioctl_enum_framesizes()
media: cec-core: fix a bug at cec_error_inj_write()
media: tda9840: cleanup a warning
media: tm6000: avoid casting just to print pointer address
media: em28xx-input: improve error handling code
media: zr364xx: avoid casting just to print pointer address
media: vivid-radio-rx: add a cast to avoid a warning
media: saa7134-alsa: don't use casts to print a buffer address
media: solo6x10: get rid of an address space warning
media: zoran: don't cast pointers to print them
media: ir-kbd-i2c: change the if logic to avoid a warning
media: ir-kbd-i2c: improve error handling code
media: saa7134-input: improve error handling
media: s2255drv: fix a casting warning
media: ivtvfb: Cleanup some warnings
media: videobuf-dma-sg: Fix a weird cast
soc_camera: fix a weird cast on printk
...
- improve checkpatch for more precise Kconfig code checking
- clarify effective selects by grouping reverse dependencies in help
- do not write out '# CONFIG_FOO is not set' from invisible symbols
- make oldconfig as silent as it should be
- rename 'silentoldconfig' to 'syncconfig'
- add unit-test framework and several test cases
- warn unmet dependency of tristate symbols
- make unmet dependency warnings readable, removing false positives
- improve recursive include detection
- use yylineno to simplify the line number tracking
- misc cleanups
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=sKto
-----END PGP SIGNATURE-----
Merge tag 'kconfig-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kconfig updates from Masahiro Yamada:
- improve checkpatch for more precise Kconfig code checking
- clarify effective selects by grouping reverse dependencies in help
- do not write out '# CONFIG_FOO is not set' from invisible symbols
- make oldconfig as silent as it should be
- rename 'silentoldconfig' to 'syncconfig'
- add unit-test framework and several test cases
- warn unmet dependency of tristate symbols
- make unmet dependency warnings readable, removing false positives
- improve recursive include detection
- use yylineno to simplify the line number tracking
- misc cleanups
* tag 'kconfig-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (30 commits)
kconfig: use yylineno option instead of manual lineno increments
kconfig: detect recursive inclusion earlier
kconfig: remove duplicated file name and lineno of recursive inclusion
kconfig: do not include both curses.h and ncurses.h for nconfig
kconfig: make unmet dependency warnings readable
kconfig: warn unmet direct dependency of tristate symbols selected by y
kconfig: tests: test if recursive inclusion is detected
kconfig: tests: test if recursive dependencies are detected
kconfig: tests: test randconfig for choice in choice
kconfig: tests: test defconfig when two choices interact
kconfig: tests: check visibility of tristate choice values in y choice
kconfig: tests: check unneeded "is not set" with unmet dependency
kconfig: tests: test if new symbols in choice are asked
kconfig: tests: test automatic submenu creation
kconfig: tests: add basic choice tests
kconfig: tests: add framework for Kconfig unit testing
kbuild: add PYTHON2 and PYTHON3 variables
kconfig: remove redundant streamline_config.pl prerequisite
kconfig: rename silentoldconfig to syncconfig
kconfig: invoke oldconfig instead of silentoldconfig from local*config
...
- add a shell script to get Clang version
- improve portability of build scripts
- drop always-enabled CONFIG_THIN_ARCHIVE and remove unused code
- rename built-in.o which is now thin archive to built-in.a
- process clean/build targets one by one to get along with -j option
- simplify ld-option
- improve building with CONFIG_TRIM_UNUSED_KSYMS
- define KBUILD_MODNAME even for objects shared among multiple modules
- avoid linking multiple instances of same objects from composite objects
- move <linux/compiler_types.h> to c_flags to include it only for C files
- clean-up various Makefiles
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJaw6eWAAoJED2LAQed4NsGrK8QAJmbYg83TTNoOgQRK/7Lg+sj
KL1+RGFxmdHRVOqG5n18L7Q4LmTD19tUFNQImrQTTrKrbH2vbMSTF2PfzdmDRwMz
R5vW5+wsagfhSttOce/GR4p9+bM9XEclzEa3liqNVQxijOFXmkV14pn0x5anYfeB
ABthxFFHcVn3exP/q3lmq048x1yNE71wUU5WQIWf6V/ZKf+++wQU8r7HpnATWYeO
vtf8gZq+xyLLjhxoJF6n6olSZXI7Yhz4jV2G68/VroS312AUFWPogK+cSshWGlSw
zGixM1q55oj9CXjZ37nR6pTzQhSZLf/uHX5beatlpeoJ4Hho6HlIABvx2oEnat7b
o5RW64RB0gVJqlYZdKxL29HNrovr9tlWPTaIPGFRvWDpl3c1w+rMKXE+5hwu8jMJ
2jgxd5FZCgBaDsAKojmeQR7PAo2ffAdUO0Dj/SuAaMOpuHWHcnJk9kIN2PUrC+Sf
d/H2soT9x+60KbQmtCEo5VfEN8bvNP3+ZSnadEG/gRN2IIa5FZAUQykU+i50gAvj
tuKAokdRGZHvXM+buYFBfN6RbhVCXzBF/fAG7r37QVR2u1zaUszmgFOUqERhTQfm
RNnyeAs9G9rljtna/AD7cIOdKTg8oETPISxt8Y6EzNMpI8PhF0aGoxso3yD19oH1
M+fq55RigsR48Kic40hY
=N5BL
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- add a shell script to get Clang version
- improve portability of build scripts
- drop always-enabled CONFIG_THIN_ARCHIVE and remove unused code
- rename built-in.o which is now thin archive to built-in.a
- process clean/build targets one by one to get along with -j option
- simplify ld-option
- improve building with CONFIG_TRIM_UNUSED_KSYMS
- define KBUILD_MODNAME even for objects shared among multiple modules
- avoid linking multiple instances of same objects from composite
objects
- move <linux/compiler_types.h> to c_flags to include it only for C
files
- clean-up various Makefiles
* tag 'kbuild-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (29 commits)
kbuild: get <linux/compiler_types.h> out of <linux/kconfig.h>
kbuild: clean up link rule of composite modules
kbuild: clean up archive rule of built-in.a
kbuild: remove partial section mismatch detection for built-in.a
net: liquidio: clean up Makefile for simpler composite object handling
lib: zstd: clean up Makefile for simpler composite object handling
kbuild: link $(real-obj-y) instead of $(obj-y) into built-in.a
kbuild: rename real-objs-y/m to real-obj-y/m
kbuild: move modname and modname-multi close to modname_flags
kbuild: simplify modname calculation
kbuild: fix modname for composite modules
kbuild: define KBUILD_MODNAME even if multiple modules share objects
kbuild: remove unnecessary $(subst $(obj)/, , ...) in modname-multi
kbuild: Use ls(1) instead of stat(1) to obtain file size
kbuild: link vmlinux only once for CONFIG_TRIM_UNUSED_KSYMS
kbuild: move include/config/ksym/* to include/ksym/*
kbuild: move CONFIG_TRIM_UNUSED_KSYMS code unneeded for external module
kbuild: restore autoksyms.h touch to the top Makefile
kbuild: move 'scripts' target below
kbuild: remove wrong 'touch' in adjust_autoksyms.sh
...
Pull parisc updates from Helge Deller:
"Lots of small enhancements and fixes in this patchset:
- improved the x86-64 compatibility for PCI cards by returning -1UL
for timed out MMIO transactions (instead of crashing)
- fixed HPMC handler for PAT machines: size needs to be multiple of 16
- prepare machine_power_off() to be able to turn rp3410 and c8000
machines off via IMPI
- added code to extract machine info for usage with qemu
- some init sections fixes
- lots of fixes for sparse-, ubsan- and uninitalized variables
warnings"
* 'parisc-4.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Fix out of array access in match_pci_device()
parisc: Add code generator for Qemu/SeaBIOS machine info
parisc/pci: Switch LBA PCI bus from Hard Fail to Soft Fail mode
parisc: Fix HPMC handler by increasing size to multiple of 16 bytes
parisc: Directly call machine_power_off() in power button driver
parisc: machine_power_off() should call pm_power_off()
parisc/Kconfig: SMP kernels boot on all machines
parisc: Silence uninitialized variable warning in dbl_to_sgl_fcnvff()
parisc: Move various functions and strings to init section
parisc: Convert MAP_TYPE to cover 4 bits on parisc
parisc: Force to various endian types for sparse
parisc/gscps2: Fix sparse warnings
parisc/led: Fix sparse warnings
parisc/parport_gsc: Use NULL to avoid sparse warning
parisc/stifb: Use fb_memset() to avoid sparse warning
Pull sparc updates from David Miller:
1) Add support for ADI (Application Data Integrity) found in more
recent sparc64 cpus. Essentially this is keyed based access to
virtual memory, and if the key encoded in the virual address is
wrong you get a trap.
The mm changes were reviewed by Andrew Morton and others.
Work by Khalid Aziz.
2) Validate DAX completion index range properly, from Rob Gardner.
3) Add proper Kconfig deps for DAX driver. From Guenter Roeck.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next:
sparc64: Make atomic_xchg() an inline function rather than a macro.
sparc64: Properly range check DAX completion index
sparc: Make auxiliary vectors for ADI available on 32-bit as well
sparc64: Oracle DAX driver depends on SPARC64
sparc64: Update signal delivery to use new helper functions
sparc64: Add support for ADI (Application Data Integrity)
mm: Allow arch code to override copy_highpage()
mm: Clear arch specific VM flags on protection change
mm: Add address parameter to arch_validate_prot()
sparc64: Add auxiliary vectors to report platform ADI properties
sparc64: Add handler for "Memory Corruption Detected" trap
sparc64: Add HV fault type handlers for ADI related faults
sparc64: Add support for ADI register fields, ASIs and traps
mm, swap: Add infrastructure for saving page metadata on swap
signals, sparc: Add signal codes for ADI violations
Pull networking updates from David Miller:
1) Support offloading wireless authentication to userspace via
NL80211_CMD_EXTERNAL_AUTH, from Srinivas Dasari.
2) A lot of work on network namespace setup/teardown from Kirill Tkhai.
Setup and cleanup of namespaces now all run asynchronously and thus
performance is significantly increased.
3) Add rx/tx timestamping support to mv88e6xxx driver, from Brandon
Streiff.
4) Support zerocopy on RDS sockets, from Sowmini Varadhan.
5) Use denser instruction encoding in x86 eBPF JIT, from Daniel
Borkmann.
6) Support hw offload of vlan filtering in mvpp2 dreiver, from Maxime
Chevallier.
7) Support grafting of child qdiscs in mlxsw driver, from Nogah
Frankel.
8) Add packet forwarding tests to selftests, from Ido Schimmel.
9) Deal with sub-optimal GSO packets better in BBR congestion control,
from Eric Dumazet.
10) Support 5-tuple hashing in ipv6 multipath routing, from David Ahern.
11) Add path MTU tests to selftests, from Stefano Brivio.
12) Various bits of IPSEC offloading support for mlx5, from Aviad
Yehezkel, Yossi Kuperman, and Saeed Mahameed.
13) Support RSS spreading on ntuple filters in SFC driver, from Edward
Cree.
14) Lots of sockmap work from John Fastabend. Applications can use eBPF
to filter sendmsg and sendpage operations.
15) In-kernel receive TLS support, from Dave Watson.
16) Add XDP support to ixgbevf, this is significant because it should
allow optimized XDP usage in various cloud environments. From Tony
Nguyen.
17) Add new Intel E800 series "ice" ethernet driver, from Anirudh
Venkataramanan et al.
18) IP fragmentation match offload support in nfp driver, from Pieter
Jansen van Vuuren.
19) Support XDP redirect in i40e driver, from Björn Töpel.
20) Add BPF_RAW_TRACEPOINT program type for accessing the arguments of
tracepoints in their raw form, from Alexei Starovoitov.
21) Lots of striding RQ improvements to mlx5 driver with many
performance improvements, from Tariq Toukan.
22) Use rhashtable for inet frag reassembly, from Eric Dumazet.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1678 commits)
net: mvneta: improve suspend/resume
net: mvneta: split rxq/txq init and txq deinit into SW and HW parts
ipv6: frags: fix /proc/sys/net/ipv6/ip6frag_low_thresh
net: bgmac: Fix endian access in bgmac_dma_tx_ring_free()
net: bgmac: Correctly annotate register space
route: check sysctl_fib_multipath_use_neigh earlier than hash
fix typo in command value in drivers/net/phy/mdio-bitbang.
sky2: Increase D3 delay to sky2 stops working after suspend
net/mlx5e: Set EQE based as default TX interrupt moderation mode
ibmvnic: Disable irqs before exiting reset from closed state
net: sched: do not emit messages while holding spinlock
vlan: also check phy_driver ts_info for vlan's real device
Bluetooth: Mark expected switch fall-throughs
Bluetooth: Set HCI_QUIRK_SIMULTANEOUS_DISCOVERY for BTUSB_QCA_ROME
Bluetooth: btrsi: remove unused including <linux/version.h>
Bluetooth: hci_bcm: Remove DMI quirk for the MINIX Z83-4
sh_eth: kill useless check in __sh_eth_get_regs()
sh_eth: add sh_eth_cpu_data::no_xdfar flag
ipv6: factorize sk_wmem_alloc updates done by __ip6_append_data()
ipv4: factorize sk_wmem_alloc updates done by __ip_append_data()
...
- Lots of work aligning Documentation/ABI with reality, done by Aishwarya
Pant.
- The trace documentation has been converted to RST by Changbin Du
- I thrashed up kernel-doc to deal with a parsing issue and to try to make
the code more readable. It's still a 20+-year-old Perl hack, though.
- Lots of other updates, typo fixes, and more.
-----BEGIN PGP SIGNATURE-----
iQJDBAABCAAtFiEEUOvtSCFqLxY/7px3jc41VjAi5XoFAlrCPGYPHGNvcmJldEBs
d24ubmV0AAoJEI3ONVYwIuV6izAP/1DpGfBdnrG4TZkCf+qQHT19ZluwGm+wOBF4
+7qa6It4BL4PbSmSSZx79yZIpeSL96codCWMFSrud71WzOzfCtidyzOduuqvEluJ
3Fhl+hxyDYDQGpPt4y7rPbjh23dliXHFzYycfsFn7H9Gj4MX74c6ktRlPUwIgR/D
YFyE2jEKUU/2wblpZgcGdS49AUZAWiC9kS2Z9lSrIswcy+G2eZ1qUfbX60tge0op
nLKWlWwv2hTO0KnYJebdHwQsRe5DkW9smPiG1fsCX5CUT1auZY9FVK3KS2AUVxia
vilpUZrjEzuSa1EKWcflpmR/RuZ37a3fhc+cDoHrnCDp5FxOkdGp035Tx0/mgIDv
I7TrUJzt+jawdVo7fMbsDcSmd12Dmsl16knVN4WXSfD1JUiTZNAIEnEH4fF5fsIF
nvASedA9rsRRvMYEqqFIAPFJxdmfm3mWBKpOVhQyyAT3/T+vR1+rr6pGmThjHL09
DZUCiPpdFqZZ8fhNZQxjQvbIkZFHLCrl1zNENlEPtvOXGZfNTdcag2mA87n4JVfp
gCf1TuEvQ/aCMSL5V7aS3exXeaq1Xe+1P4+JOhY/Rv1SbI1JopChvO8z3ElHsKzN
x+0UBYDjXSeD5LS0lCBytKo3IZLJAxabSLK4eMLdVr60kNi3c3cgtlUjNx+LTRVu
tr7nWWLY
=QQ/a
-----END PGP SIGNATURE-----
Merge tag 'docs-4.17' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"There's been a fair amount of activity in Documentation/ this time
around:
- Lots of work aligning Documentation/ABI with reality, done by
Aishwarya Pant.
- The trace documentation has been converted to RST by Changbin Du
- I thrashed up kernel-doc to deal with a parsing issue and to try to
make the code more readable. It's still a 20+-year-old Perl hack,
though.
- Lots of other updates, typo fixes, and more"
* tag 'docs-4.17' of git://git.lwn.net/linux: (82 commits)
Documentation/process: update FUSE project website
docs: kernel-doc: fix parsing of arrays
dmaengine: Fix spelling for parenthesis in dmatest documentation
dmaengine: Make dmatest.rst indeed reST compatible
dmaengine: Add note to dmatest documentation about supported channels
Documentation: magic-numbers: Fix typo
Documentation: admin-guide: add kvmconfig, xenconfig and tinyconfig commands
Input: alps - Update documentation for trackstick v3 format
Documentation: Mention why %p prints ptrval
COPYING: use the new text with points to the license files
COPYING: create a new file with points to the Kernel license files
Input: trackpoint: document sysfs interface
xfs: Change URL for the project in xfs.txt
char/bsr: add sysfs interface documentation
acpi: nfit: document sysfs interface
block: rbd: update sysfs interface
Documentation/sparse: fix typo
Documentation/CodingStyle: Add an example for braces
docs/vm: update 00-INDEX
kernel-doc: Remove __sched markings
...
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=2js3
-----END PGP SIGNATURE-----
Merge tag 'leds_for_4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds
Pull LED updates from Jacek Anaszewski:
"New LED class driver:
- add driver for Mellanox regmap LEDs
Improvement to ledtrig-disk:
- extend disk trigger for reads and writes
Improvements and fixes to existing LED class drivers:
- add more product/board names for PC Engines APU2
- fix wrong dmi_match on PC Engines APU LEDs
- clarify chips supported by LM355x driver
- fix Kconfig text for MLXCPLD, SYSCON, MC13783, NETXBIG
- allow leds-mlxcpld compilation for 32 bit arch"
* tag 'leds_for_4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds:
leds: Fix wrong dmi_match on PC Engines APU LEDs
leds: Extends disk trigger for reads and writes
leds: Add more product/board names for PC Engines APU2
leds: add driver for support Mellanox regmap LEDs for BMC and x86 platform
leds: fix Kconfig text for MLXCPLD, SYSCON, MC13783, NETXBIG
leds: Clarify supported chips by LM355x driver
leds: leds-mlxcpld: Allow compilation for 32 bit arch
This does add an IPMI BMC server-side driver, to allow a Linux
system to act as an IPMI controller. That's the biggest change,
but it is just a new driver that is fairly narrow in use.
The other largish change is removing ACPI SPMI probe support,
which should have never really been there in the beginning.
-corey
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJaw8XOAAoJEGHzjJCRm/+BeoQQAIBokkgHSAl6y8jlmmTmu9fV
gXl0GT97yAMyuTUaTvkWLdWm8GWCrSSUTAqjbcTzMWya87KRODsUg9eTO58fFw8m
ODbD7ruTGmBQggJEqDaS5NHAiU22ce2aDn5I0WjJkH8vaJ3nQSa6nEgBOzXDMC1A
OmaVQE6BnEAIA+nmlzbUgcuduB3iv7gTua2gy7MQSG/5jBPIAOQtpsgHtCZMA+Dt
bk9LqDpOa6dZry7eIn5/u62YRVLX+iVO/DoxCgZyOxVfgnV/ykKT3PvWO9vviBQV
QXXLAzLO3niDQ/ZwwpqrUWjR7oGWDKe4ntMATfnxCP7LQNrSF7LnAxz8oCcwuBxq
ELrwME8LEQmMYGFg3SYcLA0k1teTP2UVWURUH6zBTft2xzo8bJN0JU7J52tTL4xa
yC7JgTVeq8uQB8gkYKf43LGHlXlaxFQsnRKeCJ2JG+1yD+sOmxbZshfiLroMZ5DM
nPKOuMdoqPCd7JVUMs/c0IgcDHd6vtkiDRA0jh38JdIdp9B/i+dFYs61bSzrkBD9
tXUua56QTVl5WEWy2lGX+ZH/JUJbQnTxjiaW99Q9Soml6qXqIVjR5ZvLtls0PeW0
ZytaQEGuV8758YEmOGk/1pUys/oC37mDlyjTpONGYzvAyzJqU258/YU9eJMkcQ/G
FFEEkWILLuGgtFnyxwN/
=p993
-----END PGP SIGNATURE-----
Merge tag 'for-linus-4.17' of git://github.com/cminyard/linux-ipmi
Pull IPMI updates from Corey Minyard:
"Mostly small changes, as usual.
This does add an IPMI BMC server-side driver, to allow a Linux system
to act as an IPMI controller. That's the biggest change, but it is
just a new driver that is fairly narrow in use.
The other largish change is removing ACPI SPMI probe support, which
should have never really been there in the beginning"
* tag 'for-linus-4.17' of git://github.com/cminyard/linux-ipmi:
ipmi/parisc: Add IPMI chassis poweroff for certain HP PA-RISC and IA-64 servers
ipmi_ssif: Fix kernel panic at msg_done_handler
ipmi:pci: Blacklist a Realtek "IPMI" device
ipmi: Remove ACPI SPMI probing from the system interface driver
ipmi: Remove ACPI SPMI probing from the SSIF (I2C) driver
ipmi: missing error code in try_smi_init()
ipmi: use ARRAY_SIZE for poweroff_functions array sizing calculation
ipmi: Consolidate cleanup code
ipmi: Remove some unnecessary initializations
ipmi: Fix some error cleanup issues
ipmi: Add or fix SPDX-License-Identifier in all files
ipmi: Re-use existing macros for built-in properties
ipmi:pci: Make the PCI defines consistent with normal Linux ones
ipmi: kcs_bmc: coding-style fixes and use new poll type
char/ipmi: add documentation for sysfs interface
ipmi: kcs_bmc: mark expected switch fall-through in kcs_bmc_handle_data
ipmi: add an Aspeed KCS IPMI BMC driver
ipmi: add a KCS IPMI BMC driver
New drivers:
- Qualcomm SDM845: this is their new flagship SoC platform
which seems to be targeted at premium mobile handsets.
- Renesas R-Car M3-N SoC.
- Renesas R8A77980 SoC.
- NXP (ex Freescale) i.MX 6SLL SoC.
- Mediatek MT2712 SoC.
- Allwinner H6 SoC.
Improvements:
- Uniphier adds a few new functions and pins.
- Renesas refactorings and additional pin definitions.
- Improved pin groups for Axis Artpec6.
Cleanup:
- Drop the TZ1090 drivers. This platform is no longer
maintained and is being deleted.
- Drop ST-Ericsson U8540/U9540 support as this was never
productified.
- Overall minor fixes and janitorial.
-----BEGIN PGP SIGNATURE-----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=IT6S
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v4.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control bulk updates from Linus Walleij:
"New drivers:
- Qualcomm SDM845: this is their new flagship SoC platform which
seems to be targeted at premium mobile handsets.
- Renesas R-Car M3-N SoC.
- Renesas R8A77980 SoC.
- NXP (ex Freescale) i.MX 6SLL SoC.
- Mediatek MT2712 SoC.
- Allwinner H6 SoC.
Improvements:
- Uniphier adds a few new functions and pins.
- Renesas refactorings and additional pin definitions.
- Improved pin groups for Axis Artpec6.
Cleanup:
- Drop the TZ1090 drivers. This platform is no longer maintained and
is being deleted.
- Drop ST-Ericsson U8540/U9540 support as this was never
productified.
- Overall minor fixes and janitorial"
* tag 'pinctrl-v4.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (82 commits)
pinctrl: uniphier: add UART hardware flow control pin-mux settings
pinctrl: sunxi: add support for the Allwinner H6 main pin controller
pinctrl: sunxi: change irq_bank_base to irq_bank_map
pinctrl: sunxi: introduce IRQ bank conversion function
pinctrl: sunxi: refactor irq related register function to have desc
pinctrl: msm8998: Remove owner assignment from platform_driver
pinctrl: uniphier: divide I2S and S/PDIF audio out pin-mux group
pinctrl: uniphier: add PXs2 Audio in/out pin-mux settings
pinctrl/amd: poll InterruptEnable bits in enable_irq
pinctrl: ocelot: fix gpio direction
pinctrl: mtk: fix check warnings.
pintcrl: mtk: support bias-disable of generic and special pins simultaneously
pinctrl: add mt2712 pinctrl driver
pinctrl: pinctrl-single: Fix pcs_request_gpio() when bits_per_mux != 0
pinctrl: imx: Add pinctrl driver support for imx6sll
dt-bindings: imx: update pinctrl doc for imx6sll
pinctrl: intel: Implement intel_gpio_get_direction callback
pinctrl: stm32: add 'depends on HAS_IOMEM' to fix unmet dependency
pinctrl: mediatek: mtk-common: use true and false for boolean values
pinctrl: sunxi: always look for apb block
...
- Export host capabilities through debugfs
- Export card RCA register via sysfs
- Improve card initializing sequence while enabling 4-bit bus
- Export a function to enable/disable wakeup for card detect IRQ
MMC host:
- dw_mmc: Add support for new hi3798cv200 variant
- dw_mmc: Remove support for some deprecated DT properties
- mediatek: Add support for new variant used on MT7622 SoC
- sdhci: Improve wakeup support for SDIO IRQs
- sdhci: Improve wakeup support for card detect IRQs
- sdhci-omap: Add tuning support
- sdhci_omap: Add UHS-I mode support
- sunxi: Prepare for runtime PM support via a few re-factorings
- tmio: deprecate "toshiba,mmc-wrprotect-disable" DT property
- tmio/renesas_sdhi: Consolidate code supporting write protect
- tmio: Improve DMA vs PIO handling
- tmio: Add support for IP-builtin card detection logic
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=2Pd6
-----END PGP SIGNATURE-----
Merge tag 'mmc-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC updates from Ulf Hansson:
"MMC core:
- Export host capabilities through debugfs
- Export card RCA register via sysfs
- Improve card initializing sequence while enabling 4-bit bus
- Export a function to enable/disable wakeup for card detect IRQ
MMC host:
- dw_mmc: Add support for new hi3798cv200 variant
- dw_mmc: Remove support for some deprecated DT properties
- mediatek: Add support for new variant used on MT7622 SoC
- sdhci: Improve wakeup support for SDIO IRQs
- sdhci: Improve wakeup support for card detect IRQs
- sdhci-omap: Add tuning support
- sdhci_omap: Add UHS-I mode support
- sunxi: Prepare for runtime PM support via a few re-factorings
- tmio: deprecate "toshiba,mmc-wrprotect-disable" DT property
- tmio/renesas_sdhi: Consolidate code supporting write protect
- tmio: Improve DMA vs PIO handling
- tmio: Add support for IP-builtin card detection logic"
* tag 'mmc-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (55 commits)
mmc: renesas_sdhi: replace EXT_ACC with HOST_MODE
mmc: update sdio_claim_irq documentation
mmc: Export host capabilities to debugfs.
mmc: core: Disable HPI for certain Micron (Numonyx) eMMC cards
mmc: block: fix updating ext_csd caches on ioctl call
mmc: sunxi: Set our device drvdata earlier
mmc: sunxi: Move the reset deassertion before enabling the clocks
mmc: sunxi: Move resources management to separate functions
mmc: dw_mmc: add support for hi3798cv200 specific extensions of dw-mshc
dt-bindings: mmc: add bindings for hi3798cv200-dw-mshc
mmc: core: Export card RCA register via sysfs
mmc: renesas_sdhi: fix WP detection
mmc: core: Use memdup_user() rather than duplicating its implementation
mmc: dw_mmc-rockchip: correct property names in debug
mmc: sd: Remove redundant err assignment from mmc_read_switch
mmc: sdio: Check the return value of sdio_enable_4bit_bus
mmc: core: Don't try UHS-I mode if 4-bit mode isn't supported
arm64: dts: hi3660: remove 'num-slots' property for dwmmc
ARM: dts: lpc18xx: remove 'num-slots' property for dwmmc
arm64: dts: stratix10: remove 'num-slots' property for dwmmc
...
* spelling/typo fixes
* remove extra error printing for -ENOMEM
-----BEGIN PGP SIGNATURE-----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=Flbh
-----END PGP SIGNATURE-----
Merge tag 'hsi-for-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi
Pull HSI updates from Sebastian Reichel:
- spelling/typo fixes
- remove extra error printing for -ENOMEM
* tag 'hsi-for-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi:
HSI: hsi_char: Delete an error message for a failed memory allocation in hsc_probe()
HSI: ssi_protocol: fix spelling mistake: "trigerred" -> "triggered"
HSI: ssi_protocol: Delete an error message for a failed memory allocation in ssi_protocol_probe()
HSI: ssi_protocol: Fix a typo in two comment lines
* Microsemi Ocelot reset support
* Spreadtrum SC27xx reset support
* generic gpio charger: lot's of cleanups
* axp20x fuel gauge: add AXP813 support
* misc. fixes
-----BEGIN PGP SIGNATURE-----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=VY8H
-----END PGP SIGNATURE-----
Merge tag 'for-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply and reset updates from Sebastian Reichel:
- Microsemi Ocelot reset support
- Spreadtrum SC27xx reset support
- generic gpio charger: lot's of cleanups
- axp20x fuel gauge: add AXP813 support
- misc fixes, including one devicetree change for the Nokia N900, that
has been Acked-by Tony Lindgren
* tag 'for-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (27 commits)
power: reset: at91-reset: Switch from the pr_*() to the dev_*() logging functions
power: reset: at91-poweroff: Remove redundant dev_err call in at91_poweroff_probe()
power: reset: at91-poweroff: Switch from the pr_*() to the dev_*() logging functions
power: reset: make function sc27xx_poweroff_shutdown static
power: supply: da9150-fg: remove VLA usage
ARM: dts: omap3-n900: Add link between battery and charger
power: supply: bq2415x: add DT referencing support
power: supply: bq27xxx: support missing supplier device
max17042: propagate of_node to power supply device
power: supply: axp288_fuel_gauge: Fix full status reporting
power: supply: axp288_fuel_gauge: Do not register FG on ECS EF20EA
power: reset: gpio-poweroff: Support for timeout from device property
dt-bindings: power: reset: gpio-poweroff: Add 'timeout-ms' property
power: reset: Add Spreadtrum SC27xx PMIC power off support
power: supply: axp20x_battery: add support for AXP813
dt-bindings: power: supply: axp20x: add AXP813 battery DT binding
power: supply: axp20x_battery: use data struct for variant specific code
power: supply: gpio-charger: Remove pdata from gpio_charger
power: supply: gpio-charger: Use GPIOF_ACTIVE_LOW for legacy setup
power: supply: gpio-charger: Remove redundant dev_err call in probe function
...
A quiet release for SPI, some fixes and small updates for individual
drivers with one bigger change from Linus Walleij which coverts the
bitbanging SPI driver to use the GPIO descriptor API from Linus Walleij.
Since GPIO descriptors were used by platform data this means there's a
few changes in arch/ making relevant updates for a few platforms and one
misc driver that are affected.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAlrCYDYTHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0DXhB/9Hueo2D1Pku0iAwq+yIAPvk2N0fyGP
YWJWbDQGngSZEnU3dUzdfaOHh4MMiMgs0q8hxOYnmkIhhTs7cXsPj8x6rlZP8bee
TtSEEgHSuHlVWyADquFIel8OCq8BWd7p4aQKqP3LaojCH/wqswxtn4I+RH/xw1Rd
LIPgU12fxGUpRMO7uGNiMhqqkQDH1ZBFzCUYRPqQk2E+5hyZraQYoROgZkEBPzb1
EWjLxLxytj/Zj4N5eQkW4BWfX5HKJb9CpwKIIdyNuybr14yC5FR83VxOf9wW4/pG
39DIn8LtGTkuMRF4Yw5rPlC9KqnLpUDTnQCcOW4lt+z8QtZQ+LP3boxE
=xNln
-----END PGP SIGNATURE-----
Merge tag 'spi-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull SPI updates from Mark Brown:
"A quiet release for SPI, some fixes and small updates for individual
drivers with one bigger change from Linus Walleij which coverts the
bitbanging SPI driver to use the GPIO descriptor API from Linus
Walleij.
Since GPIO descriptors were used by platform data this means there's a
few changes in arch/ making relevant updates for a few platforms and
one misc driver that are affected"
* tag 'spi-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (24 commits)
MAINTAINERS: update Andi's e-mail
spi: spi-atmel: Use correct enum for DMA transfer direction
spi: sh-msiof: Document R-Car M3-N support
spi: sh-msiof: Use correct enum for DMA transfer direction
spi: sprd: Add the support of restarting the system
spi: sprd: Simplify the transfer function
spi: Fix unregistration of controller with fixed SPI bus number
spi: rspi: use correct enum for DMA transfer direction
spi: jcore: disable ref_clk after getting its rate
spi: bcm-qspi: fIX some error handling paths
spi: pxa2xx: Disable runtime PM if controller registration fails
spi: tegra20-slink: use true and false for boolean values
spi: Fix scatterlist elements size in spi_map_buf
spi: atmel: init FIFOs before spi enable
spi: orion: Prepare space for per-child options
spi: orion: Make the error message greppable
spi: orion: Rework GPIO CS handling
spi: bcm2835aux: Avoid 64-bit arithmetic in xfer len calc
spi: spi-gpio: Augment device tree bindings
spi: spi-gpio: Rewrite to use GPIO descriptors
...
A very small set of updates for the regulator API this time around,
there's a few bug fixes and also:
- Conversion of the regulator API to use GPIO descriptors rather than
numbers from Linus Walleij.
- New drivers for Marvell 88PG86x and Qualcomm PM8998 and PMI8998.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAlrCWysTHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0GRNB/46x233PDi9o0GWsVYyCy5BLwINq9xC
K1pPNoTWN9BS6VkDwaQIXOXS0qIjf5OCMCFLcAc1wncGVQDEUUNb8ndDYb+zLksn
Ra5n8vX5qmWHdZHyecy8gFqHzLbsNUvR0E62vtghsGSuM2EeKNcHOCnd852TkcF6
Bh9GKHXIDvQcos1bHBTbkRfb/CM4uF9rzN38NdTiyxYVqvhdBbo4h33tcuKHrvHn
vO3tkrnhUvDdX9YNbhIal/qecouX3KsZZuLdHt/l8ygSx2eoVEzdoA9uyvU9rywe
FZkc45DIYYH7Yz+faFHVRMU4oBN8jwalVjlGTWBD8Iyje+BT2w0eFUCJ
=/rLA
-----END PGP SIGNATURE-----
Merge tag 'regulator-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"A very small set of updates for the regulator API this time around,
there's a few bug fixes and also:
- Conversion of the regulator API to use GPIO descriptors rather than
numbers from Linus Walleij.
- New drivers for Marvell 88PG86x and Qualcomm PM8998 and PMI8998"
* tag 'regulator-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: qcom: smd: Add pm8998 and pmi8998 regulators
regulator: core: Add missing blank line between functions
regulator: qcom_smd: Drop regulator/{machine,of_regulator} includes
regulator: giving regulator controlling gpios a non-empty label when used through the devicetree.
regulator: gpio: Fix some error handling paths in 'gpio_regulator_probe()'
regulator: 88pg86x: new i2c dual regulator chip
regulator: 88pg86x: add DT bindings document
regulator: da9211: Pass descriptors instead of GPIO numbers
regulator: da9055: Pass descriptor instead of GPIO number
regulator: core: Support passing an initialized GPIO enable descriptor
regulator: dt: regulator-name is required property
regulator: of: Add a missing 'of_node_put()' in an error handling path of 'of_regulator_match()'
This is a fairly large set of updates for regmap, mainly bugfixes. The
biggest bit of this is some fixes for the bulk operations code which
had issues in some use cases, Charles Keepax has sorted them out. We
also gained the ability to use debugfs with syscon regmaps and to
specify the clock to be used with MMIO regmaps.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAlrCVS8THGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0I8DCACDPubZk2MzaXHIa/jCNAtJty+lEYuK
X7Q/dOqrUxOoLcpMQNH8cHc9UtQ01xrthOkcOIOwVandOf6VHea7NpNzqZIZwCh9
K5kqpHMOs2Gmx39Kg3ng4lNmzDf/XUeheI8qPDyqAKb9fFQjD+F3bOVsiU7a3VOh
oCGk81fdLEb5Xp2qKaIM3viZ7AemEJABRdKrIs/hghNv4DaHV2auIh8FJ9WFzGwK
s+JAP2RIX9N6HR4mmnDUtfavEDQwrDXN3IDxDjxkgo2CT62e5D1wZ9ixUWM+q1RA
74n3Mc5ZoMxAssNiuEOPRLWTbsPpGtJhKcN0QbUdViM8UMKwHSRvpFAS
=CqUP
-----END PGP SIGNATURE-----
Merge tag 'regmap-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap updates from Mark Brown:
"This is a fairly large set of updates for regmap, mainly bugfixes.
The biggest bit of this is some fixes for the bulk operations code
which had issues in some use cases, Charles Keepax has sorted them
out. We also gained the ability to use debugfs with syscon regmaps and
to specify the clock to be used with MMIO regmaps"
* tag 'regmap-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: (21 commits)
regmap: debugfs: Improve warning message on debugfs_create_dir() failure
regmap: debugfs: Free map->debugfs_name when debugfs_create_dir() failed
regmap: debugfs: Don't leak dummy names
regmap: debugfs: Disambiguate dummy debugfs file name
regmap: mmio: Add function to attach a clock
regmap: Merge redundant handling in regmap_bulk_write
regmap: Tidy up regmap_raw_write chunking code
regmap: Move the handling for max_raw_write into regmap_raw_write
regmap: Remove unnecessary printk for failed allocation
regmap: Format data for raw write in regmap_bulk_write
regmap: use debugfs even when no device
regmap: Allow missing device in regmap_name_read_file()
regmap: Use _regmap_read in regmap_bulk_read
regmap: Tidy up regmap_raw_read chunking code
regmap: Move the handling for max_raw_read into regmap_raw_read
regmap: Use helper function for register offset
regmap: Don't use format_val in regmap_bulk_read
regmap: Correct comparison in regmap_cached
regmap: Correct offset handling in regmap_volatile_range
regmap-i2c: Off by one in regmap_i2c_smbus_i2c_read/write()
...
- Modify the cpuidle poll state implementation to prevent CPUs from
staying in the loop in there for excessive times (Rafael Wysocki).
- Add Intel Cannon Lake chips support to the RAPL power capping
driver (Joe Konno).
- Add reference counting to the device links handling code in the
PM core (Lukas Wunner).
- Avoid reconfiguring GPEs on suspend-to-idle in the ACPI system
suspend code (Rafael Wysocki).
- Allow devices to be put into deeper low-power states via ACPI
if both _SxD and _SxW are missing (Daniel Drake).
- Reorganize the core ACPI suspend-to-idle wakeup code to avoid a
keyboard wakeup issue on Asus UX331UA (Chris Chiu).
- Prevent the PCMCIA library code from aborting suspend-to-idle due
to noirq suspend failures resulting from incorrect assumptions
(Rafael Wysocki).
- Add coupled cpuidle supprt to the Exynos3250 platform (Marek
Szyprowski).
- Add new sysfs file to make it easier to specify the image storage
location during hibernation (Mario Limonciello).
- Add sysfs files for collecting suspend-to-idle usage and time
statistics for CPU idle states (Rafael Wysocki).
- Update the pm-graph utilities (Todd Brandt).
- Reduce the kernel log noise related to reporting Low-power Idle
constraings by the ACPI system suspend code (Rafael Wysocki).
- Make it easier to distinguish dedicated wakeup IRQs in the
/proc/interrupts output (Tony Lindgren).
- Add the frequency table validation in cpufreq to the core and
drop it from a number of cpufreq drivers (Viresh Kumar).
- Drop "cooling-{min|max}-level" for CPU nodes from a couple of
DT bindings (Viresh Kumar).
- Clean up the CPU online error code path in the cpufreq core
(Viresh Kumar).
- Fix assorted issues in the SCPI, CPPC, mediatek and tegra186
cpufreq drivers (Arnd Bergmann, Chunyu Hu, George Cherian,
Viresh Kumar).
- Drop memory allocation error messages from a few places in
cpufreq and cpuildle drivers (Markus Elfring).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=6JC2
-----END PGP SIGNATURE-----
Merge tag 'pm-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These update the cpuidle poll state definition to reduce excessive
energy usage related to it, add new CPU ID to the RAPL power capping
driver, update the ACPI system suspend code to handle some special
cases better, extend the PM core's device links code slightly, add new
sysfs attribute for better suspend-to-idle diagnostics and easier
hibernation handling, update power management tools and clean up
cpufreq quite a bit.
Specifics:
- Modify the cpuidle poll state implementation to prevent CPUs from
staying in the loop in there for excessive times (Rafael Wysocki).
- Add Intel Cannon Lake chips support to the RAPL power capping
driver (Joe Konno).
- Add reference counting to the device links handling code in the PM
core (Lukas Wunner).
- Avoid reconfiguring GPEs on suspend-to-idle in the ACPI system
suspend code (Rafael Wysocki).
- Allow devices to be put into deeper low-power states via ACPI if
both _SxD and _SxW are missing (Daniel Drake).
- Reorganize the core ACPI suspend-to-idle wakeup code to avoid a
keyboard wakeup issue on Asus UX331UA (Chris Chiu).
- Prevent the PCMCIA library code from aborting suspend-to-idle due
to noirq suspend failures resulting from incorrect assumptions
(Rafael Wysocki).
- Add coupled cpuidle supprt to the Exynos3250 platform (Marek
Szyprowski).
- Add new sysfs file to make it easier to specify the image storage
location during hibernation (Mario Limonciello).
- Add sysfs files for collecting suspend-to-idle usage and time
statistics for CPU idle states (Rafael Wysocki).
- Update the pm-graph utilities (Todd Brandt).
- Reduce the kernel log noise related to reporting Low-power Idle
constraings by the ACPI system suspend code (Rafael Wysocki).
- Make it easier to distinguish dedicated wakeup IRQs in the
/proc/interrupts output (Tony Lindgren).
- Add the frequency table validation in cpufreq to the core and drop
it from a number of cpufreq drivers (Viresh Kumar).
- Drop "cooling-{min|max}-level" for CPU nodes from a couple of DT
bindings (Viresh Kumar).
- Clean up the CPU online error code path in the cpufreq core (Viresh
Kumar).
- Fix assorted issues in the SCPI, CPPC, mediatek and tegra186
cpufreq drivers (Arnd Bergmann, Chunyu Hu, George Cherian, Viresh
Kumar).
- Drop memory allocation error messages from a few places in cpufreq
and cpuildle drivers (Markus Elfring)"
* tag 'pm-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (56 commits)
ACPI / PM: Fix keyboard wakeup from suspend-to-idle on ASUS UX331UA
cpufreq: CPPC: Use transition_delay_us depending transition_latency
PM / hibernate: Change message when writing to /sys/power/resume
PM / hibernate: Make passing hibernate offsets more friendly
cpuidle: poll_state: Avoid invoking local_clock() too often
PM: cpuidle/suspend: Add s2idle usage and time state attributes
cpuidle: Enable coupled cpuidle support on Exynos3250 platform
cpuidle: poll_state: Add time limit to poll_idle()
cpufreq: tegra186: Don't validate the frequency table twice
cpufreq: speedstep: Don't validate the frequency table twice
cpufreq: sparc: Don't validate the frequency table twice
cpufreq: sh: Don't validate the frequency table twice
cpufreq: sfi: Don't validate the frequency table twice
cpufreq: scpi: Don't validate the frequency table twice
cpufreq: sc520: Don't validate the frequency table twice
cpufreq: s3c24xx: Don't validate the frequency table twice
cpufreq: qoirq: Don't validate the frequency table twice
cpufreq: pxa: Don't validate the frequency table twice
cpufreq: ppc_cbe: Don't validate the frequency table twice
cpufreq: powernow: Don't validate the frequency table twice
...
- Update the in-kernel ACPICA code to upstream revision 20180313
including:
* Module-level AML code handling fixes and simplifications (Bob
Moore, Erik Schmauss).
* Fixes and cleanups related to messaging (Bob Moore).
* Events handling fixes related to disabling and enabling GPEs
(Erik Schmauss).
* Introduction of SPDX license identifiers and removal of license
boilerplate in multiple files (Erik Schmauss).
* Assorted fixes and cleanups (Bob Moore, Erik Schmauss, Hans
de Goede, Seunghun Han).
- Add new basic driver for the ACPI Time and Alarm Device (Rafael
Wysocki).
- Modify the ACPI battery driver to support battery thresholds on
Lenovo ThinkPads (Ognjen Galic, Colin Ian King).
- Avoid reporting battery capacity over 100 in the ACPI battery
driver in some cases (Laszlo Toth).
- Make the kernel recognize an OEM _OSI string from Dell to avoid
power management issues with NVidia GPUs in Dell platforms (Alex
Hung).
- Make the PCI IRQ management code handle missing _PRS cleanly (Alex
Hung).
- Fix uevent notifications related to device hotplut (Lee, Chun-Yi).
- Prevent the ACPI PAD driver from leaking memory (Lenny Szubowicz).
- Update the ACPI CPPC library code to include subspace IDs in the
kernel messages logged by it (George Cherian).
- Add backlight quirk for Samsung 670Z5E (Hans de Goede).
- Add the NFIT and HMAT tables to the list of ACPI tables that can
be overridden via initrd (Dan Williams).
- Fix and clean up some ACPI documentation and Kconfig help language
(Aishwarya Pant, Randy Dunlap).
- Replace license boilerplate with an SPDX license ID in the ACPI
PMIC operation region handling code (Rajmohan Mani).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=pVZ/
-----END PGP SIGNATURE-----
Merge tag 'acpi-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These update the ACPICA code in the kernel to follow upstream revision
20180313 which includes fixes related to the so-called module-level
AML (mostly "if" type of statements outside of any methods) that
should improve the handling of systems that load alternative SSDTs
depending on the current configuration, for example, and event
handling fixes related to disabling and enabling GPEs on system
startup and on suspend/resume.
Moreover, the ACPICA license boilerplate is replaced with SPDX license
IDs which alone reduces the number of lines of ACPICA code in the
kernel quite a bit.
Also added is a new driver for the generic ACPI Time and Alarm Device
(TAD). At the moment it only handles the most basic capabilities of
the TAD, however.
In addition to that the ACPI battery driver is improved to handle
battery thresholds on ThinkPads, among other things, some bugs are
fixed, a new backlight quirk is added and some documentation is
updated.
Specifics:
- Update the in-kernel ACPICA code to upstream revision 20180313
including:
* Module-level AML code handling fixes and simplifications (Bob
Moore, Erik Schmauss).
* Fixes and cleanups related to messaging (Bob Moore).
* Events handling fixes related to disabling and enabling GPEs
(Erik Schmauss).
* Introduction of SPDX license identifiers and removal of license
boilerplate in multiple files (Erik Schmauss).
* Assorted fixes and cleanups (Bob Moore, Erik Schmauss, Hans de
Goede, Seunghun Han).
- Add new basic driver for the ACPI Time and Alarm Device (Rafael
Wysocki).
- Modify the ACPI battery driver to support battery thresholds on
Lenovo ThinkPads (Ognjen Galic, Colin Ian King).
- Avoid reporting battery capacity over 100 in the ACPI battery
driver in some cases (Laszlo Toth).
- Make the kernel recognize an OEM _OSI string from Dell to avoid
power management issues with NVidia GPUs in Dell platforms (Alex
Hung).
- Make the PCI IRQ management code handle missing _PRS cleanly (Alex
Hung).
- Fix uevent notifications related to device hotplut (Lee, Chun-Yi).
- Prevent the ACPI PAD driver from leaking memory (Lenny Szubowicz).
- Update the ACPI CPPC library code to include subspace IDs in the
kernel messages logged by it (George Cherian).
- Add backlight quirk for Samsung 670Z5E (Hans de Goede).
- Add the NFIT and HMAT tables to the list of ACPI tables that can be
overridden via initrd (Dan Williams).
- Fix and clean up some ACPI documentation and Kconfig help language
(Aishwarya Pant, Randy Dunlap).
- Replace license boilerplate with an SPDX license ID in the ACPI
PMIC operation region handling code (Rajmohan Mani)"
* tag 'acpi-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (39 commits)
ACPI: acpi_pad: Fix memory leak in power saving threads
ACPI / video: Add quirk to force acpi-video backlight on Samsung 670Z5E
ACPI: Add Time and Alarm Device (TAD) driver
ACPI / scan: Send change uevent with offine environmental data
ACPI / Kconfig: Update ACPI_PROCFS_POWER help text
ACPI / OSI: Add OEM _OSI strings to disable NVidia RTD3
ACPICA: Update version to 20180313
ACPICA: Cleanup/simplify module-level code support
ACPICA: Events: add a return on failure from acpi_hw_register_read
ACPICA: adding SPDX headers
ACPICA: Rename a global for clarity, no functional change
ACPICA: macros: fix ACPI_ERROR_NAMESPACE macro
ACPICA: Change a compile-time option to a runtime option
ACPICA: Remove calling of _STA from acpi_get_object_info()
ACPICA: AML Debug Object: Don't ignore output of zero-length strings
ACPICA: Fix memory leak on unusual memory leak
ACPICA: Events: Dispatch GPEs after enabling for the first time
ACPICA: Events: Add parallel GPE handling support to fix potential redundant _Exx evaluations
ACPICA: Events: Stop unconditionally clearing ACPI IRQs during suspend/resume
ACPICA: acpi: acpica: fix acpi operand cache leak in nseval.c
...
The device tree code looks for CONFIG_CMDLINE_FORCE, but we were using
CONFIG_CMDLINE_OVERRIDE. It looks like this was just a hold over from
before our device tree conversion -- in fact, we'd already removed the
support for CONFIG_CMDLINE_OVERRIDE from our arch-specific code so it
didn't even work any more.
Thanks to Mortiz and Trung for finding the original bug, and for Michael
for suggeting a better fix.
CC: Trung Tran <trung.tran@ettus.com>
CC: Michael J Clark <mjc@sifive.com>
Reviewed-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
This avoids a lot of -Wunused warnings such as:
====================
kernel/debug/debug_core.c: In function ‘kgdb_cpu_enter’:
./arch/sparc/include/asm/cmpxchg_64.h:55:22: warning: value computed is not used [-Wunused-value]
#define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))
./arch/sparc/include/asm/atomic_64.h:86:30: note: in expansion of macro ‘xchg’
#define atomic_xchg(v, new) (xchg(&((v)->counter), new))
^~~~
kernel/debug/debug_core.c:508:4: note: in expansion of macro ‘atomic_xchg’
atomic_xchg(&kgdb_active, cpu);
^~~~~~~~~~~
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The PCM runtime object is created and freed dynamically at PCM stream
open / close time. This is tracked via substream->runtime, and it's
cleared at snd_pcm_detach_substream().
The runtime object assignment is protected by PCM open_mutex, so for
all PCM operations, it's safely handled. However, each PCM substream
provides also an ALSA timer interface, and user-space can access to
this while closing a PCM substream. This may eventually lead to a
UAF, as snd_pcm_timer_resolution() tries to access the runtime while
clearing it in other side.
Fortunately, it's the only concurrent access from the PCM timer, and
it merely reads runtime->timer_resolution field. So, we can avoid the
race by reordering kfree() and wrapping the substream->runtime
clearance with the corresponding timer lock.
Reported-by: syzbot+8e62ff4e07aa2ce87826@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Pull removal of in-kernel calls to syscalls from Dominik Brodowski:
"System calls are interaction points between userspace and the kernel.
Therefore, system call functions such as sys_xyzzy() or
compat_sys_xyzzy() should only be called from userspace via the
syscall table, but not from elsewhere in the kernel.
At least on 64-bit x86, it will likely be a hard requirement from
v4.17 onwards to not call system call functions in the kernel: It is
better to use use a different calling convention for system calls
there, where struct pt_regs is decoded on-the-fly in a syscall wrapper
which then hands processing over to the actual syscall function. This
means that only those parameters which are actually needed for a
specific syscall are passed on during syscall entry, instead of
filling in six CPU registers with random user space content all the
time (which may cause serious trouble down the call chain). Those
x86-specific patches will be pushed through the x86 tree in the near
future.
Moreover, rules on how data may be accessed may differ between kernel
data and user data. This is another reason why calling sys_xyzzy() is
generally a bad idea, and -- at most -- acceptable in arch-specific
code.
This patchset removes all in-kernel calls to syscall functions in the
kernel with the exception of arch/. On top of this, it cleans up the
three places where many syscalls are referenced or prototyped, namely
kernel/sys_ni.c, include/linux/syscalls.h and include/linux/compat.h"
* 'syscalls-next' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/linux: (109 commits)
bpf: whitelist all syscalls for error injection
kernel/sys_ni: remove {sys_,sys_compat} from cond_syscall definitions
kernel/sys_ni: sort cond_syscall() entries
syscalls/x86: auto-create compat_sys_*() prototypes
syscalls: sort syscall prototypes in include/linux/compat.h
net: remove compat_sys_*() prototypes from net/compat.h
syscalls: sort syscall prototypes in include/linux/syscalls.h
kexec: move sys_kexec_load() prototype to syscalls.h
x86/sigreturn: use SYSCALL_DEFINE0
x86: fix sys_sigreturn() return type to be long, not unsigned long
x86/ioport: add ksys_ioperm() helper; remove in-kernel calls to sys_ioperm()
mm: add ksys_readahead() helper; remove in-kernel calls to sys_readahead()
mm: add ksys_mmap_pgoff() helper; remove in-kernel calls to sys_mmap_pgoff()
mm: add ksys_fadvise64_64() helper; remove in-kernel call to sys_fadvise64_64()
fs: add ksys_fallocate() wrapper; remove in-kernel calls to sys_fallocate()
fs: add ksys_p{read,write}64() helpers; remove in-kernel calls to syscalls
fs: add ksys_truncate() wrapper; remove in-kernel calls to sys_truncate()
fs: add ksys_sync_file_range helper(); remove in-kernel calls to syscall
kernel: add ksys_setsid() helper; remove in-kernel call to sys_setsid()
kernel: add ksys_unshare() helper; remove in-kernel calls to sys_unshare()
...
Commit 2a98dc028f ("include/linux/bitmap.h: turn bitmap_set and
bitmap_clear into memset when possible") introduced an optimization to
bitmap_{set,clear}() which uses memset() when the start and length are
constants aligned to a byte.
This is wrong on big-endian systems; our bitmaps are arrays of unsigned
long, so bit n is not at byte n / 8 in memory. This was caught by the
Btrfs selftests, but the bitmap selftests also fail when run on a
big-endian machine.
We can still use memset if the start and length are aligned to an
unsigned long, so do that on big-endian. The same problem applies to
the memcmp in bitmap_equal(), so fix it there, too.
Fixes: 2a98dc028f ("include/linux/bitmap.h: turn bitmap_set and bitmap_clear into memset when possible")
Fixes: 2c6deb0152 ("bitmap: use memcmp optimisation in more situations")
Cc: stable@kernel.org
Reported-by: "Erhard F." <erhard_f@mailbox.org>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Tan Xiaojun
Dirk van der Merwe
Alexander Graf
Jakub Kicinski
Jon Maloy
David S. Miller
Alexey Kodanev
Russell King
Eric Dumazet
Florian Fainelli
Cong Wang
David Howells
Palmer Dabbelt
Al Viro
Linus Torvalds
James Bottomley
Takashi Iwai
Omar Sandoval