Commit Graph

1391 Commits

Author SHA1 Message Date
Linus Torvalds 6fd03301d7 Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: (64 commits)
  debugfs: use specified mode to possibly mark files read/write only
  debugfs: Fix terminology inconsistency of dir name to mount debugfs filesystem.
  xen: remove driver_data direct access of struct device from more drivers
  usb: gadget: at91_udc: remove driver_data direct access of struct device
  uml: remove driver_data direct access of struct device
  block/ps3: remove driver_data direct access of struct device
  s390: remove driver_data direct access of struct device
  parport: remove driver_data direct access of struct device
  parisc: remove driver_data direct access of struct device
  of_serial: remove driver_data direct access of struct device
  mips: remove driver_data direct access of struct device
  ipmi: remove driver_data direct access of struct device
  infiniband: ehca: remove driver_data direct access of struct device
  ibmvscsi: gadget: at91_udc: remove driver_data direct access of struct device
  hvcs: remove driver_data direct access of struct device
  xen block: remove driver_data direct access of struct device
  thermal: remove driver_data direct access of struct device
  scsi: remove driver_data direct access of struct device
  pcmcia: remove driver_data direct access of struct device
  PCIE: remove driver_data direct access of struct device
  ...

Manually fix up trivial conflicts due to different direct driver_data
direct access fixups in drivers/block/{ps3disk.c,ps3vram.c}
2009-06-16 12:57:37 -07:00
Sascha Hauer 1a2c4b3147 imx: Check for NULL pointer deref before calling tty_encode_baud_rate
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-16 12:01:17 -07:00
Haavard Skinnemoen 0ccad87012 atmel_serial: fix hang in set_termios when crtscts is enabled
After enabling hardware flow control, any subsequent termios call may hang
waiting for the transmitter to drain.  This appears to be caused by a
busy-loop in set_termios() waiting for the transmitter to become empty,
which may take a very long time (or hang indefinitely) if the device at
the other end is blocking us.

A quick look through the tty and serial_core code indicates that any
necessary flushing (which is optional) has already been done at this
point, so there's no need for the driver to flush the transmitter on its
own.

Fix it by removing the busy-loop altogether.

Tested-by: Eirik Aanonsen <eaa@wprmedical.com>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-16 12:01:16 -07:00
Greg Kroah-Hartman 3cf62a5a82 of_serial: remove driver_data direct access of struct device
In the near future, the driver core is going to not allow direct access
to the driver_data pointer in struct device.  Instead, the functions
dev_get_drvdata() and dev_set_drvdata() should be used.  These functions
have been around since the beginning, so are backwards compatible with
all older kernel versions.

Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Matthias Fuchs <mfuchs@ma-fu.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-15 21:30:28 -07:00
David S. Miller 9cbc1cb8cd Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6
Conflicts:
	Documentation/feature-removal-schedule.txt
	drivers/scsi/fcoe/fcoe.c
	net/core/drop_monitor.c
	net/core/net-traces.c
2009-06-15 03:02:23 -07:00
Linus Torvalds 489f7ab6c1 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (31 commits)
  trivial: remove the trivial patch monkey's name from SubmittingPatches
  trivial: Fix a typo in comment of addrconf_dad_start()
  trivial: usb: fix missing space typo in doc
  trivial: pci hotplug: adding __init/__exit macros to sgi_hotplug
  trivial: Remove the hyphen from git commands
  trivial: fix ETIMEOUT -> ETIMEDOUT typos
  trivial: Kconfig: .ko is normally not included in module names
  trivial: SubmittingPatches: fix typo
  trivial: Documentation/dell_rbu.txt: fix typos
  trivial: Fix Pavel's address in MAINTAINERS
  trivial: ftrace:fix description of trace directory
  trivial: unnecessary (void*) cast removal in sound/oss/msnd.c
  trivial: input/misc: Fix typo in Kconfig
  trivial: fix grammo in bus_for_each_dev() kerneldoc
  trivial: rbtree.txt: fix rb_entry() parameters in sample code
  trivial: spelling fix in ppc code comments
  trivial: fix typo in bio_alloc kernel doc
  trivial: Documentation/rbtree.txt: cleanup kerneldoc of rbtree.txt
  trivial: Miscellaneous documentation typo fixes
  trivial: fix typo milisecond/millisecond for documentation and source comments.
  ...
2009-06-14 13:46:25 -07:00
Linus Torvalds 2cf4d4514d Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (417 commits)
  MAINTAINERS: EB110ATX is not ebsa110
  MAINTAINERS: update Eric Miao's email address and status
  fb: add support of LCD display controller on pxa168/910 (base layer)
  [ARM] 5552/1: ep93xx get_uart_rate(): use EP93XX_SYSCON_PWRCNT and EP93XX_SYSCON_PWRCN
  [ARM] pxa/sharpsl_pm: zaurus needs generic pxa suspend/resume routines
  [ARM] 5544/1: Trust PrimeCell resource sizes
  [ARM] pxa/sharpsl_pm: cleanup of gpio-related code.
  [ARM] pxa/sharpsl_pm: drop set_irq_type calls
  [ARM] pxa/sharpsl_pm: merge pxa-specific code into generic one
  [ARM] pxa/sharpsl_pm: merge the two sharpsl_pm.c since it's now pxa specific
  [ARM] sa1100: remove unused collie_pm.c
  [ARM] pxa: fix the conflicting non-static declarations of global_gpios[]
  [ARM] 5550/1: Add default configure file for w90p910 platform
  [ARM] 5549/1: Add clock api for w90p910 platform.
  [ARM] 5548/1: Add gpio api for w90p910 platform
  [ARM] 5551/1: Add multi-function pin api for w90p910 platform.
  [ARM] Make ARM_VIC_NR depend on ARM_VIC
  [ARM] 5546/1: ARM PL022 SSP/SPI driver v3
  ARM: OMAP4: SMP: Update defconfig for OMAP4430
  ARM: OMAP4: SMP: Enable SMP support for OMAP4430
  ...
2009-06-14 13:42:43 -07:00
Pavel Machek 4737f0978d trivial: Kconfig: .ko is normally not included in module names
.ko is normally not included in Kconfig help, make it consistent.

Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-12 18:01:50 +02:00
Linus Torvalds d3d07d941f Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (266 commits)
  sh: Tie sparseirq in to Kconfig.
  sh: Wire up sys_rt_tgsigqueueinfo.
  sh: Fix sys_pwritev() syscall table entry for sh32.
  sh: Fix sh4a llsc-based cmpxchg()
  sh: sh7724: Add JPU support
  sh: sh7724: INTC setting update
  sh: sh7722 clock framework rewrite
  sh: sh7366 clock framework rewrite
  sh: sh7343 clock framework rewrite
  sh: sh7724 clock framework rewrite V3
  sh: sh7723 clock framework rewrite V2
  sh: add enable()/disable()/set_rate() to div6 code
  sh: add AP325RXA mode pin configuration
  sh: add Migo-R mode pin configuration
  sh: sh7722 mode pin definitions
  sh: sh7724 mode pin comments
  sh: sh7723 mode pin V2
  sh: rework mode pin code
  sh: clock div6 helper code
  sh: clock div4 frequency table offset fix
  ...
2009-06-11 10:08:33 -07:00
Oskar Schirmer d7f8d437bd imx: serial: use tty_encode_baud_rate to set true rate
real baud rate may be different from the one requested.
for upper layers, set the nearest value to the real rate
in favour of the rate previously requested.

Signed-off-by: Oskar Schirmer <os@emlix.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 08:51:09 -07:00
Fabian Godehardt b6e4913834 imx: serial: add IrDA support to serial driver
Using the iMX serial driver with an IrDA device
needs extra peripheral settings and specific
timing depending on the transmitter circuitry used.

Signed-off-by: Fabian Godehardt <fg@emlix.com>
Signed-off-by: Oskar Schirmer <os@emlix.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 08:51:08 -07:00
Oskar Schirmer 534fca068e imx: serial: use rational library function
for calculation of numerator and denominator
used in baud rate setting, use generic library function
for optimum settings.

Signed-off-by: Oskar Schirmer <os@emlix.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 08:51:08 -07:00
Daniel Glöckner 9f322ad064 imx: serial: handle initialisation failure correctly
correctly de-initialise device when setting up failed,
call to pdata->exit() was missing.

Signed-off-by: Daniel Glöckner <dg@emlix.com>
Signed-off-by: Oskar Schirmer <os@emlix.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 08:51:08 -07:00
Fabian Godehardt 2e1463922a imx: serial: be sure to stop xmit upon shutdown
needed to avoid continued transmission by hardware
while software already shuts down, which might
cause dangling characters to show up in hardware
queues when restarting the device.

Signed-off-by: Fabian Godehardt <fg@emlix.com>
Signed-off-by: Oskar Schirmer <os@emlix.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 08:51:08 -07:00
Fabian Godehardt 977757311e imx: serial: notify higher layers in case xmit IRQ was not called
upper layers, namely line discipline, need to be notified
when transmission of more data is possible. For spurious
cases, where IRQ handling does not supply notification
for sure, it is given additionally here, when data has just
been transmitted and space in the buffer will most probably
be available.

Signed-off-by: Fabian Godehardt <fg@emlix.com>
Signed-off-by: Oskar Schirmer <os@emlix.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 08:51:08 -07:00
Daniel Glöckner 26bbb3ff1f imx: serial: fix one bit field type
"have_rtscts" is assigned 1, while it is declared
int:1, two's complement, which can hold 0 and -1
only. The code works, as the upper bits are cut
off, and tests are done against 0 only.

Nonetheless, correctly declaring the bit field
as unsigned int:1 renders the code more robust.

Signed-off-by: Daniel Glöckner <dg@emlix.com>
Signed-off-by: Oskar Schirmer <os@emlix.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 08:51:08 -07:00
Oskar Schirmer d3810cd4d7 imx: serial: fix whitespaces (no changes in functionality)
Signed-off-by: Oskar Schirmer <os@emlix.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 08:51:07 -07:00
Alan Cox 7d55deaf50 timbuart: Fix the termios logic
The driver only handles speeds but it fails to return the current values
for the hardware features it does not support.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 08:51:06 -07:00
Richard Röjfors 34aec59184 serial: Added Timberdale UART driver
Driver for the UART found in the Timberdale FPGA

Signed-off-by: Richard Röjfors <richard.rojfors.ext@mocean-labs.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 08:51:06 -07:00
Sonic Zhang 2860b79111 Blackfin Serial Driver: disable dma rx interrupt only rather than all irqs
The UART RX handling code isn't exactly speeding, so don't go disabling
all interrupts when processing the buffer.  Just disable the relevant DMA
interrupt.  This greatly improves latency of the system when utilizing the
UART.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 08:51:05 -07:00
Sonic Zhang 84507794a9 Blackfin Serial Driver: handle anomaly 05000231
05000231 - UART STB Bit Incorrectly Affects Receiver Setting
For processors affected by this, we cannot safely allow CSTOPB to be set
as the UART will then be unable to properly clock in bytes.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 08:51:04 -07:00
Sonic Zhang 0efa4f2c94 Blackfin Serial Driver: annotate anomalies 05000215 and 05000099
Add some comments for how these anomalies are addressed:

05000215 - UART TX Interrupt Masked Erroneously
We always clear ETBEI within last UART TX interrupt to end
a string.  It is always set when starting a new tx transfer.

05000099 - UART Line Status Register (UART_LSR) Bits Are Not Updated at
the Same Time
This anomaly affects driver only in POLL code where multi bits of
UART_LSR are checked. It doesn't affect current bfin_5xx.c driver.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 08:51:04 -07:00
Sonic Zhang 35ff693579 Blackfin Serial Driver: handle irregular DMA register status in auto start mode
This bug is caused by irregular behavior of DMA register CURR_X_COUNT
and CURR_Y_COUNT when an auto restart uart rx DMA run to last byte in
DMA buffer, trigger the interrupt and stay at this possiton. The status
of current x and y is 0:7 instead of 512:8 or 0:8. The driver doesn't
take care of this case when calculating the position.

URL: http://blackfin.uclinux.org/gf/tracker/5063
Reported-by: Tomasz Motylewski <t.motylewski@bfad.de>

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 08:51:04 -07:00
Graf Yang f9d36da9cd Blackfin Serial Driver: fix missing new lines when under load
Add a SSYNC() into bfin_serial_dma_tx_chars() to ensure DMA registers are
written with new data otherwise we might miss a byte or two when the
system is under load.  PIO mode is OK though.

Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 08:51:04 -07:00
Robin Getz 7de7c55bf5 Blackfin Serial Driver: fix baudrate for early_printk
Since we already setup the early console UART in
arch/blackfin/kernel/early_printk.c, and common functions which are
enabled from the .setup will override the proper settings later, don't
fill in these structures.  Otherwise we get mangled baudrate settings when
using early_printk.

Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 08:51:04 -07:00
Sonic Zhang 8516c568f2 Blackfin Serial Driver: fix error while transferring large files
Ignore receiving data if new position is in the same line of current
buffer tail and is small.  This should decrease overruns.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 08:51:04 -07:00
Mike Frysinger 4328e3e5ef Blackfin SPORT UART: rewrite inline assembly
Hopefuly the new version is easier to read, but in the process it declares
proper clobber lists and better constraints so that GCC can do a better
job at allocating free registers.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 08:51:04 -07:00
Michael Hennerich a19e8b2059 Blackfin SPORT UART: fix data misses while using transmit frame sync
SPORT transmit frame sync (TFS) isn't used as an electrical signal during
normal SPORT UART emulation.  However, it is useful in EIA RS-485
emulation as RS-485 Transceiver Driver Enable DE strobe.

This patch configures:
TFS to be active high in order to drive an DE strobe of
an eventually connected RS-485 Transceiver.

Late frame sync mode (LATFS) gating the entire TX shift cycle.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 08:51:03 -07:00
Mike Frysinger b5c6794fe4 Blackfin SPORT UART: fix typo in sport_set_termios prototype
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 08:51:03 -07:00
Florian Fainelli 08e0992f60 serial: add support for the TI AR7 internal UART
This patch adds support for the TI AR7 internal UART.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 08:51:03 -07:00
Breno Leitao 257a6e8cc7 icom: fix compile errors when defining ICOM_TRACE
As it is, defining ICOM_TRACE produces some compile errors, as
"parameter name omitted" and "redefinition of ‘trace’"

This patch removes the wrong trace definition.

Signed-off-by: Breno Leitao <leitao@linux.vnet.ibm.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 08:51:03 -07:00
Breno Leitao aba6593bf7 icom: fixing a if clause spaghetti
adapter->version can only be ADAPTER_V2 or ADAPTER_V1. So,
that OR operand in the "if" clause is non-sense and can be removed.

Signed-off-by: Breno Leitao <leitao@linux.vnet.ibm.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 08:51:02 -07:00
Alexander Y. Fomichev 13858d3690 jsm: correctly support multiple 4/8-port boards
If there are more then one 4/8-port board jsm_uart_port_init
allocate a line numbers of the second and further boards
from range of previous one.

This patch fixed the problem.

Signed-off-by: Alexander Y. Fomichev <git.user@gmail.com>

[printks fixed to add jsm: ]

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 08:51:02 -07:00
Andre Przywara 70fd8fdecc 8250_pci: add the OXCB950 chip to the 8250 PCI driver.
This adds support for the following serial controller chip:
Oxford Semiconductor OXCB950 for PCI Cardbus interface
http://www.transdimension.com/products/serial/OXCB950.html

on this card:
ExSys EX-1370 1 port high-speed serial card for ExpressCard/34 slot

Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 08:50:58 -07:00
Linus Walleij dc890c2dcd [ARM] 5544/1: Trust PrimeCell resource sizes
I found the PrimeCell/AMBA Bus drivers distrusting the resource
passed in as part of the struct amba_device abstraction. This
patch removes all hard coded resource sizes found in the PrimeCell
drivers and move the responsibility of this definition back to
the platform/board device definition, which already exist and
appear to be correct for all in-tree users of these drivers.
We do this using the resource_size() inline function which was
also replicated in the only driver using the resource size, so
that has been changed too. The KMI_SIZE was left in kmi.h in case
someone likes it. Test-compiled against Versatile and Integrator
defconfigs, seems to work but I don't posess these boards and
cannot test them.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-06-11 15:36:56 +01:00
Paul Mundt cf9fe114e3 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 2009-06-11 09:01:14 +03:00
Russell King 7698fdedcf Merge branch 'for-rmk' of git://git.marvell.com/orion into devel 2009-06-08 19:27:13 +01:00
Russell King 2d8d24935d Merge branch 'mxc-master' of git://git.pengutronix.de/git/imx/linux-2.6 into devel 2009-06-08 19:26:28 +01:00
Alessandro Rubini 5926a295bb [ARM] 5541/1: serial/amba-pl011.c: add support for the modified port found in Nomadik
The Nomadik 8815 SoC has a slightly modified version of the PL011 block.
The patch uses the different ID value as a key to select a vendor
structure that is used to keep track of the differences, as suggested
by Russell King.

Signed-off-by: Alessandro Rubini <rubini@unipv.it>
Acked-by: Andrea Gallo <andrea.gallo@stericsson.com>
Acked-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-06-04 17:45:30 +01:00
Eric Lammerts e76afc4e78 fix oops when using console=ttymxcN with N > 0
Signed-off-by: Eric Lammerts <eric@lammerts.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-06-03 11:51:05 +02:00
SUGIOKA Toshinobu dd0a3e77c8 serial: sh-sci: Fix up PORT_SCI console output ordering.
Fix SCI transmission sequence in console output function.

This reorders the write sequence to match the SH-3 manual, and corrects
a console corruption bug observed on SH-3 SCI.

Signed-off-by: Toshinobu Sugioka <sugioka@itonet.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-02 12:11:18 +09:00
Alessandro Rubini 4dd9e742df [ARM] 5505/1: serial amba-pl011: move to arch_initcall for earlier console
Signed-off-by: Alessandro Rubini <rubini@unipv.it>"
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-31 14:58:11 +01:00
Alan Cox b8e7e40abe 8250: Fix oops from setserial
If you setserial a port which has never been initialised we change the type
but don't update the I/O method pointers. The same problem is true if you
change the io type of a port - but nobody ever does that so nobody noticed!

Remember the old type and when attaching if the type has changed reload the
port accessor pointers. We can't do it blindly as some 8250 drivers load custom
accessors and we must not stomp those.

Tested-by: Victor Seryodkin <vvscore@gmail.com>
Closes-bug: #13367
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-29 08:42:38 -07:00
Alexander Beregalov 8e8e8267f0 serial: 8250_gsc: fix printk format error
drivers/serial/8250_gsc.c:44: warning: format '%lx' expects type
'long unsigned int', but argument 2 has type 'resource_size_t'

[akpm@linux-foundation.org: fix it to handle u64's]
Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-29 08:40:02 -07:00
Roel Kluin b898f4f869 drivers/serial/mpc52xx_uart.c: fix array overindexing check
The check for an overindexing of mpc52xx_uart_{ports,nodes} has an
off-by-one.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-29 08:40:02 -07:00
Russell King 42f1d2e06a Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci into devel 2009-05-29 10:04:24 +01:00
Paul Mundt 464c9e1037 Merge branch 'sh/clkfwk' 2009-05-26 23:50:40 +09:00
Russell King fc05505b77 Merge branch 'ixp4xx' of git://git.kernel.org/pub/scm/linux/kernel/git/chris/linux-2.6 into devel 2009-05-23 23:18:40 +01:00
Breno Leitao 95caa0a9bd icom: fix rmmod crash
Actually the icom driver is crashing when is being removed because
the driver is kfreeing the adapter structure before calling
pci_release_regions(), which result in the following error:

  Unable to handle kernel paging request for data at address 0x6b6b6b6b6b6b6d33
  Faulting instruction address: 0xc000000000246b80
  Oops: Kernel access of bad area, sig: 11 [#1]
  ....
  [c000000012d436a0] [c0000000001002d0] .kfree+0x120/0x34c (unreliable)
  [c000000012d43730] [c000000000246d60] .pci_release_selected_regions+0x3c/0x68
  [c000000012d437c0] [d000000002d54700] .icom_kref_release+0xf4/0x118 [icom]
  [c000000012d43850] [c000000000232e50] .kref_put+0x74/0x94
  [c000000012d438d0] [d000000002d56c58] .icom_remove+0x40/0xa4 [icom]
  [c000000012d43960] [c000000000249e48] .pci_device_remove+0x50/0x90
  [c000000012d439e0] [c0000000002d68d8] .__device_release_driver+0x94/0xd4
  [c000000012d43a70] [c0000000002d7104] .driver_detach+0xf8/0x12c
  [c000000012d43b00] [c0000000002d549c] .bus_remove_driver+0xbc/0x11c
  [c000000012d43b90] [c0000000002d71dc] .driver_unregister+0x60/0x80
  [c000000012d43c20] [c00000000024a07c] .pci_unregister_driver+0x44/0xe8
  [c000000012d43cb0] [d000000002d56bf4] .icom_exit+0x1c/0x40 [icom]
  [c000000012d43d30] [c000000000095fa8] .SyS_delete_module+0x214/0x2a8
  [c000000012d43e30] [c00000000000852c] syscall_exit+0x0/0x40

Signed-off-by: Breno Leitao <leitao@linux.vnet.ibm.com>
Cc: stable@kernel.org
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-22 21:47:52 -07:00
Paul Mundt 5f8371cec9 Merge branches 'sh/stable-updates' and 'sh/sparseirq' 2009-05-22 13:29:37 +09:00