Commit Graph

173 Commits

Author SHA1 Message Date
Thomas Gleixner 09f90f6685 m68k: Simplify low level interrupt handling code
The low level interrupt entry code of m68k contains the following:

    add_preempt_count(HARDIRQ_OFFSET);

    do_IRQ();
	irq_enter();
	    add_preempt_count(HARDIRQ_OFFSET);
	handle_interrupt();    
	irq_exit();    
	    sub_preempt_count(HARDIRQ_OFFSET);
	    if (in_interrupt())
       	       return; <---- On m68k always taken!
	    if (local_softirq_pending())
       	       do_softirq();

    sub_preempt_count(HARDIRQ_OFFSET);
    if (in_hardirq())
       return;
    if (status_on_stack_has_interrupt_priority_mask > 0)
       return;
    if (local_softirq_pending())
       do_softirq();

    ret_from_exception:
	if (interrupted_context_is_kernel)
	   return:
	....

I tried to find a proper explanation for this, but the changelog is
sparse and there are no mails explaining it further. But obviously
this relates to the interrupt priority levels of the m68k and tries to
be extra clever with nested interrupts. Though this cleverness just
adds code bloat to the interrupt hotpath.

For the common case of non nested interrupts the code runs through two
extra conditionals to the only important one, which checks whether the
return is to kernel or user space.

For the nested case the checks for in_hardirq() and the priority mask
value on stack catch only the case where the nested interrupt happens
inside the hard irq context of the first interrupt. If the nested
interrupt happens while the first interrupt handles soft interrupts,
then these extra checks buy nothing. The nested interrupt will fall
through to the final kernel/user space return check at
ret_from_exception.

Changing the code flow in the following way:

    do_IRQ();
	irq_enter();
	    add_preempt_count(HARDIRQ_OFFSET);
	handle_interrupt();    
	irq_exit();    
	    sub_preempt_count(HARDIRQ_OFFSET);
	    if (in_interrupt())
       	       return;
	    if (local_softirq_pending())
       	       do_softirq();

    ret_from_exception:
	if (interrupted_context_is_kernel)
	   return:

makes the region protected by the hardirq count slightly smaller and
the softirq handling is invoked with a minimal deeper stack. But
otherwise it's completely functional equivalent and saves 104 bytes of
text in arch/m68k/kernel/entry.o.

This modification allows us further to get rid of the limitations
which m68k puts on the preempt_count layout, so we can make the
preempt count bits completely generic.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Michael Schmitz <schmitz@biophys.uni-duesseldorf.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Linux/m68k <linux-m68k@vger.kernel.org>
Cc: Andreas Schwab <schwab@linux-m68k.org>
Link: http://lkml.kernel.org/r/alpine.DEB.2.02.1311112052360.30673@ionos.tec.linutronix.de
2013-11-13 20:21:46 +01:00
Linus Torvalds 0a759b2466 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k
Pull m68k updates from Geert Uytterhoeven:
 "Summary:
   - __put_user_unaligned may/will be used by btrfs
   - m68k part of a global cleanup"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k: Remove deprecated IRQF_DISABLED
  m68k/m68knommu: Implement __get_user_unaligned/__put_user_unaligned()
2013-11-11 18:17:07 +09:00
Michael Opdenacker 77a4279678 m68k: Remove deprecated IRQF_DISABLED
This patch proposes to remove the IRQF_DISABLED flag from m68k architecture
code. It's a NOOP since 2.6.35 and it will be removed one day.

Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2013-09-26 09:54:16 +02:00
Linus Torvalds 833ae40b51 Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu
Pull m68knommu fixes from Greg Ungerer:
 "Just a small collection of cleanups and fixes this time, no big
  changes.  The most interresting are to make the m68k and m68knommu
  consistently use CONFIG_IOMAP, clean out some unused board config
  options and flush the cache on signal stack creation"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  m68k: remove 16 unused boards in Kconfig.machine
  m68k: define 'VM_DATA_DEFAULT_FLAGS' no matter whether has 'NOMMU' or not
  m68knommu: user generic iomap to support ioread*/iowrite*
  m68k/coldfire: flush cache when creating the signal stack frame
  m68knommu: Mark functions only called from setup_arch() __init
2013-09-09 09:04:46 -07:00
Geert Uytterhoeven df592eb5dc m68knommu: Mark functions only called from setup_arch() __init
Some functions that are only called (indirectly) from setup_arch() lack
__init annotations.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2013-08-26 16:51:13 +10:00
Yinghai Lu 928bea9648 PCI: Delay enabling bridges until they're needed
We currently enable PCI bridges after scanning a bus and assigning
resources.  This is often done in arch code.

This patch changes this so we don't enable a bridge until necessary, i.e.,
until we enable a PCI device behind the bridge.  We do this in the generic
pci_enable_device() path, so this also removes the arch-specific code to
enable bridges.

[bhelgaas: changelog]
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-07-25 12:35:03 -06:00
Jiang Liu d9e6ba5fed m68k/PCI: Remove redundant call of pci_bus_add_devices()
pci_scan_bus() has called pci_bus_add_devices() already, so remove the
redundant call of pci_bus_add_devices().  subsys_init() callbacks will be
invoked before device_init() callbacks, so it should be safe to remove the
redundant calls.

[bhelgaas: split unicore32 into a separate patch]
Signed-off-by: Jiang Liu <jiang.liu@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Greg Ungerer <gerg@uclinux.org>
2013-06-14 17:38:39 -06:00
Greg Ungerer 2842e5b00e m68knommu: enable Timer on coldfire 532x
This patch enables the initial Timer on coldfire 532x systems.
Without this, the scheduler will not be triggered and the system hangs,
after all sequential code is executed. It should also apply on later kernel
versions.

Signed-off-by: Christian Gieseler <christiangieseler@yahoo.de>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2013-04-29 09:17:59 +10:00
Greg Ungerer e73cbe21ea m68knommu: make ColdFire M532x platform support more v3 generic
The M532x CPU platform support can be used on more ColdFire CPU families
than just the 532x types. So rename and reconfigure it to reflect that.
The ColdFire 537x family has virtualy identical internals to the 532x,
and so it will be able to share this code when we add support for them.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2013-04-29 09:17:58 +10:00
Greg Ungerer 6eac402783 m68knommu: create and use a common M53xx ColdFire class of CPUs
The current CONFIG_M532x support definitions are actually common to a larger
set of version 3 ColdFire CPU types. In the future we want to add support for
the 537x family. It is very similar to the 532x internally, and will be able
to use most of the same definitions.

Create a CONFIG_M53xx option that is enabled to support any of the common
532x and 537x CPU types. Convert the current users of CONFIG_M532x to use
CONFIG_M53xx instead.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2013-04-29 09:17:58 +10:00
Greg Ungerer 0371a1c5ae m68knommu: fix misnamed GPIO pin definition for ColdFire 528x CPU
Compiling for a ColdFire 528x CPU will result in:

arch/m68k/platform/coldfire/m528x.c: In function ‘m528x_uarts_init’:
arch/m68k/platform/coldfire/m528x.c:72: error: ‘MCF5282_GPIO_PUAPAR’ undeclared (first use in this function)
arch/m68k/platform/coldfire/m528x.c:72: error: (Each undeclared identifier is reported only once
arch/m68k/platform/coldfire/m528x.c:72: error: for each function it appears in.)

The MCF5282_GPIO_PUAPAR definition changed names in the ColdFire definitions
cleanup. It is now MCFGPIO_PUAPAR, so change it.

Not sure how this one got missed, 2 lines below it is the correct use of
this definition.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2013-03-04 15:19:31 +10:00
Greg Ungerer 280ef31a00 m68knommu: modify clock code so it can be used by all ColdFire CPU types
The existing clk.c code for ColdFire CPUs has one set of functions to
support those CPU types that have selectable clocks (those with a PPMCR
register), and a duplicate simpler set for those with static clocks.

Modify the clk.c code so there is just one set of support functions. All
CPU types now define a list of clocks (in "struct clk"s), so we only need
a single set of clock functions.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-12-05 10:51:35 +10:00
Greg Ungerer 98122d7329 m68knommu: add clock definitions for 54xx ColdFire CPU types
Add a base set of clocks for the 54xx ColdFire CPU types.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-12-05 10:51:35 +10:00
Greg Ungerer 50564ec536 m68knommu: add clock definitions for 5407 ColdFire CPU types
Add a base set of clocks for the 5407 ColdFire CPU types.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-12-05 10:51:33 +10:00
Greg Ungerer 91ca1bbd9a m68knommu: add clock definitions for 5307 ColdFire CPU types
Add a base set of clocks for the 5307 ColdFire CPU types.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-12-05 10:51:32 +10:00
Greg Ungerer 87f3776953 m68knommu: add clock definitions for 528x ColdFire CPU types
Add a base set of clocks for the 528x ColdFire CPU types.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-12-05 10:51:31 +10:00
Greg Ungerer a3d8eb0da2 m68knommu: add clock definitions for 527x ColdFire CPU types
Add a base set of clocks for the 527x ColdFire CPU types.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-12-05 10:51:30 +10:00
Greg Ungerer 7acef7a2b8 m68knommu: add clock definitions for 5272 ColdFire CPU types
Add a base set of clocks for the 5272 ColdFire CPU types.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-12-05 10:51:29 +10:00
Greg Ungerer 5847c478ed m68knommu: add clock definitions for 525x ColdFire CPU types
Add a base set of clocks for the 525x ColdFire CPU types.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-12-05 10:51:28 +10:00
Greg Ungerer ee1e6b3277 m68knommu: add clock definitions for 5249 ColdFire CPU types
Add a base set of clocks for the 5249 ColdFire CPU types.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-12-05 10:51:27 +10:00
Greg Ungerer a0f8f8c8a1 m68knommu: add clock definitions for 523x ColdFire CPU types
Add a base set of clocks for the 523x ColdFire CPU types.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-12-05 10:51:26 +10:00
Greg Ungerer e2d3416461 m68knommu: add clock definitions for 5206 ColdFire CPU types
Add a base set of clocks for the 5206 ColdFire CPU types.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-12-05 10:51:25 +10:00
Greg Ungerer 5a4acf3eac m68knommu: merge ColdFire 5249 and 525x definitions
The ColdFire 5249 and 525x family of SoCs are very similar. Most of the
internals are the same, and are mapped the same. We can use a single set of
peripheral definitions for all of them.

So merge the current m5249sim.h and m525xsim.h definitions into a single
file. The 5249 is now obsolete, and the 525x parts are current, so I have
chosen to move everything into the existing m525xsim.h file.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-12-05 10:51:21 +10:00
Luis Alves 99e083747d m68knommu: platform code merge for 68000 core cpus
This patch merges all 68000 core cpus into one directory.
There is a lot of common code in the 68328, 68EZ328 and 68VZ328 directories.

This will also facilitate easy development of support for original stand
alone MC68000 CPU machines.

Signed-off-by: Luis Alves <ljalvs@gmail.com>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-12-05 10:48:47 +10:00
Greg Ungerer 944c3d81db m68knommu: clean up ColdFire 54xx General Timer definitions
Convert the ColdFire 54xx CPU General Timer register address definitions to
include the MCF_MBAR peripheral region offset. This makes them consistent
with all other 54xx address register definitions (in m54xxsim.h).

The goal is to reduce different definitions used (some including offsets and
others not) causing bugs when used incorrectly.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-09-27 23:34:03 +10:00
Greg Ungerer 632306f245 m68knommu: clean up Pin Assignment definitions for the 54xx ColdFire CPU
The Pin Assignment register definitions for the ColdFire 54xx CPU family are
inconsistently named and defined compared to the other ColdFire part
definitions. Rename them with the same prefix as used on other parts,
MCFGPIO_PAR_, and make their definitions include the MCF_MBAR periphperal
region offset.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-09-27 23:34:02 +10:00
Greg Ungerer 98d9696b38 m68knommu: fix multi-function pin setup for FEC module on ColdFire 523x
The multi-function pin setup code for the FEC ethernet module is using just
plain wrong. Looks like it was cut-and-pasted from other init code. It has
hard coded register addresses that are incorrect for the 523x, and it is
manipulating bits that don't make sense.

Add proper register definitions for the Pin Assignment registers of the 532x,
and then use them to fix the setup code for the FEC hardware module.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-09-27 23:34:01 +10:00
Greg Ungerer f2f41c68ea m68knommu: move ColdFire slice timer address defiens to 54xx header
Move the base address defines of the ColdFire 54xx CPU slice timers into the
54xx specific header (m54xxsim.h). They are CPU specific, and belong with the
CPU specific defines. Also make them relative to the MBAR peripheral region,
making the define the absolute address.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-09-27 23:34:01 +10:00
Greg Ungerer 6d8a1393ec m68knommu: use read/write IO access functions in ColdFire m532x setup code
Get rid of the use of local IO access macros and switch to using the standard
read*/write* family of access functions for the ColdFire m532x setup code.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-09-27 23:34:00 +10:00
Greg Ungerer e4c2b9befe m68knommu: modify ColdFire 532x GPIO register definitions to be consistent
The ColdFire 532x CPU register definitions for the multi-function setup
pins are inconsistently defined compared with other ColdFire parts. Modify
the register defintions to be just the addresses, not pointers. This also
fixes the erroneous use in one case of using these values in the UART setup
code for the 532x.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-09-27 23:33:59 +10:00
Greg Ungerer a91f741589 m68knommu: use definitions for the ColdFire 528x FEC multi-function pins
Currently the setup code for the FEC multi-function pins on the ColdFire 528x
has the addresses hard coded in the code. Use the register defines that
already exist for this.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-09-27 23:33:57 +10:00
Greg Ungerer f821e349cf m68knommu: remove address offsets relative to IPSBAR for ColdFire 527x
Remove the last address definitions relative to the IPSBAR peripheral region
for the ColdFire 527x family. This involved cleaning up some magic numbers
used in the code part, and making them proper register definitions in the 527x
specific header.

This is part of the process of cleaning up the ColdFire register definitions
to make them consistently use absolute addresses for the primary registers.
This will reduce the occasional bugs caused by inconsistent definition of
the register addresses.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-09-27 23:33:56 +10:00
Greg Ungerer 4fb62ededf m68knommu: fix wrong register offsets used for ColdFire 5272 multi-function pins
The registers used to configure and set the multifunction pins on the 5272
ColdFire are defined as absolute addresses. So the use of them does not need
to be offset relative to the peripheral region address.

Fix two cases of incorrect usage of these addresses. Both affect UART
initialization, one in the common UART pin setup code, the other in the
NETtel board specific UART signal handling.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-09-27 23:33:54 +10:00
Greg Ungerer 041a89a419 m68knommu: make ColdFire 5249 MBAR2 register definitions absolute addresses
Make the ColdFire 5249 MBAR peripheral register definitions absolute
addresses, instead of offsets into the region.

The various ColdFire parts use different methods to address the internal
registers, some are absolute, some are relative to peripheral regions
which can be mapped at different address ranges (such as the MBAR and IPSBAR
registers). We don't want to deal with this in the code when we are
accessing these registers, so make all register definitions the absolute
address - factoring out whether it is an offset into a peripheral region.

This makes them all consistently defined, and reduces the occasional bugs
caused by inconsistent definition of the register addresses.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-09-27 23:33:53 +10:00
Greg Ungerer d72a5abb7e m68knommu: make remaining ColdFire 5272 register definitions absolute addresses
Make the remaining definitions of the 5272 ColdFire registers absolute
addresses. Currently some are relative to the MBAR peripheral region.

The various ColdFire parts use different methods to address the internal
registers, some are absolute, some are relative to peripheral regions
which can be mapped at different address ranges (such as the MBAR and IPSBAR
registers). We don't want to deal with this in the code when we are
accessing these registers, so make all register definitions the absolute
address - factoring out whether it is an offset into a peripheral region.

This makes them all consistently defined, and reduces the occasional bugs
caused by inconsistent definition of the register addresses.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-09-27 23:33:52 +10:00
Greg Ungerer 1419ea3b34 m68knommu: make ColdFire Chip Select register definitions absolute addresses
Make all definitions of the ColdFire Chip Select registers absolute addresses.
Currently some are relative to the MBAR peripheral region.

The various ColdFire parts use different methods to address the internal
registers, some are absolute, some are relative to peripheral regions
which can be mapped at different address ranges (such as the MBAR and IPSBAR
registers). We don't want to deal with this in the code when we are
accessing these registers, so make all register definitions the absolute
address - factoring out whether it is an offset into a peripheral region.

This makes them all consistently defined, and reduces the occasional bugs
caused by inconsistent definition of the register addresses.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-09-27 23:33:51 +10:00
Greg Ungerer c986a3d520 m68knommu: make ColdFire Interrupt Source register definitions absolute addresses
Make all definitions of the ColdFire Interrupt Source registers absolute
addresses. Currently some are relative to the MBAR peripheral region.

The various ColdFire parts use different methods to address the internal
registers, some are absolute, some are relative to peripheral regions
which can be mapped at different address ranges (such as the MBAR and IPSBAR
registers). We don't want to deal with this in the code when we are
accessing these registers, so make all register definitions the absolute
address - factoring out whether it is an offset into a peripheral region.

This makes them all consistently defined, and reduces the occasional bugs
caused by inconsistent definition of the register addresses.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-09-27 23:33:50 +10:00
Greg Ungerer 660b73e356 m68knommu: make ColdFire watchdog register definitions absolute addresses
Make all definitions of the ColdFire Software watchdog registers absolute
addresses. Currently some are relative to the MBAR peripheral region.

The various ColdFire parts use different methods to address the internal
registers, some are absolute, some are relative to peripheral regions
which can be mapped at different address ranges (such as the MBAR and IPSBAR
registers). We don't want to deal with this in the code when we are
accessing these registers, so make all register definitions the absolute
address - factoring out whether it is an offset into a peripheral region.

This makes them all consistently defined, and reduces the occasional bugs
caused by inconsistent definition of the register addresses.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-09-27 23:33:48 +10:00
Greg Ungerer e1e362dc07 m68knommu: make ColdFire SYPCR and RSR register definitions absolute addresses
Make all definitions of the ColdFire Reset and System registers absolute
addresses. Currently some are relative to the MBAR peripheral region.

The various ColdFire parts use different methods to address the internal
registers, some are absolute, some are relative to peripheral regions
which can be mapped at different address ranges (such as the MBAR and IPSBAR
registers). We don't want to deal with this in the code when we are
accessing these registers, so make all register definitions the abolsute
address - factoring out whether it is an offset into a peripheral region.

This makes them all consistently defined, and reduces the occasional bugs
caused by inconsistent definition of the register addresses.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-09-27 23:33:47 +10:00
Greg Ungerer 6a3a786d02 m68knommu: make ColdFire IMR and IPR register definitions absolute addresses
Make all definitions of the ColdFire Interrupt Mask and Pending registers
absolute addresses. Currently some are relative to the MBAR peripheral region.

The various ColdFire parts use different methods to address the internal
registers, some are absolute, some are relative to peripheral regions
which can be mapped at different address ranges (such as the MBAR and IPSBAR
registers). We don't want to deal with this in the code when we are
accessing these registers, so make all register definitions the absolute
address - factoring out whether it is an offset into a peripheral region.

This makes them all consistently defined, and reduces the occasional bugs
caused by inconsistent definition of the register addresses.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-09-27 23:33:46 +10:00
Paul Bolle 0c0e6db806 m68k: drop unused parts of 68VZ328 Makefile
DRAGEN2 should obviously be CONFIG_DRAGEN2, but the screen.h entry it
triggers only references files that are nowhere to be found in the
current tree. Besides, nothing uses screen.h. So just drop all that.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-09-27 23:27:50 +10:00
Lars-Peter Clausen 8ef997b67f ARM: 7534/1: clk: Make the managed clk functions generically available
The managed clk functions are currently only available when the generic clk
lookup framework is build. But the managed clk functions are merely wrappers
around clk_get and clk_put and do not depend on any specifics of the generic
lookup functions and there are still quite a few custom implementations of the
clk API. So make the managed functions available whenever the clk API is
implemented.

The patch also removes the custom implementation of devm_clk_get for the
coldfire platform.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-09-15 21:55:27 +01:00
Linus Torvalds 587a9e1f95 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k
Pull m68k updates from Geert Uytterhoeven.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k: Make sys_atomic_cmpxchg_32 work on classic m68k
  m68k/apollo: Rename "timer" to "apollo_timer"
  zorro: Remove unused zorro_bus.devices
  m68k: Remove never used asm/shm.h
  m68k/sun3: Remove unselectable code in prom_init()
  m68k: Use asm-generic version of <asm/sections.h>
  m68k: Replace m68k-specific _[se]bss by generic __bss_{start,stop}
  mtd/uclinux: Use generic __bss_stop instead of _ebss
  m68knommu: Allow ColdFire CPUs to use unaligned accesses
  m68k: Remove five unused headers
  m68k: CPU32 does not support unaligned accesses
  m68k: Introduce config option CPU_HAS_NO_UNALIGNED
  m68k: delay, muldi3 - Use CONFIG_CPU_HAS_NO_MULDIV64
  m68k: Move CPU_HAS_* config options
  m68k: Remove duplicate FPU config option
  m68knommu: Clean up printing of sections
  m68k: Use asm-generic version of <asm/types.h>
  m68k: Use Kbuild logic to import asm-generic headers
2012-08-03 10:52:41 -07:00
Greg Ungerer bbdea849ed m68k: add PCI bus code support for the ColdFire M54xx SoC family
The ColdFire M54xx SoC family have a traditional PCI bus interface.
Add the core support code to access and use this bus on these parts.
This code provides all the config space access functions and IO access
functions. It also carries out the PCI bus initialization and hooks into
the kernel PCI subsystem.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-07-17 15:49:44 +10:00
Greg Ungerer 8b1e5a0626 m68knommu: platform support for 8390 based ethernet used on some boards
Quite a few of Freescale's older ColdFire development boards used an NS8390
based ethernet interface. Add a platform definition for the resources used
by these devices so we can use it on these boards.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-07-16 09:59:22 +10:00
Steven King 12ce4c1f26 m68knommu: Add clk definitions for m532x.
The 532x has individually controllable clocks for it peripherals.  Add clk
definitions for these and add default initialization of either enabled or
disabled.

Signed-off-by: Steven King <sfking@fdwdc.com>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-07-16 09:59:22 +10:00
Steven King fe66158aaf m68knommu: Add clk definitions for m520x.
The 520x has individually controllable clocks for its peripherals.  Add clk
definitions for these and add default initialization of either enabled or
disabled for all of the clocks.

Signed-off-by: Steven King <sfking@fdwdc.com>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-07-16 09:59:22 +10:00
Steven King c785a3d728 m68knommu: Add rtc device for m5441x.
Add definitions for the m5441x rtc device and an init_BSP function to the
m5441x device code.

Signed-off-by: Steven King <sfking@fdwdc.com>
2012-07-16 09:59:21 +10:00
Steven King bea8bcb12d m68knommu: Add support for the Coldfire m5441x.
Add support for the Coldfire 5441x (54410/54415/54416/54417/54418).  Currently
we only support noMMU mode.  It requires the PIT patch posted previously as it
uses the PIT instead of the dma timer as a clock source so we can get all that
GENERIC_CLOCKEVENTS goodness.  It also adds some simple clk definitions and
very simple minded power management.  The gpio code is tweeked and some
additional devices are added to devices.c.  The Makefile uses -mv4e as
apparently, the only difference a v4m (m5441x) and a v4e is the later has a
FPU, which I don't think should matter to us in the kernel.

Signed-off-by: Steven King <sfking@fdwdc.com>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-07-16 09:59:21 +10:00
Steven King bdee4e26ba m68knommu: use MCF_IRQ_PIT1 instead of MCFINT_VECBASE + MCFINT_PIT1
use MCF_IRQ_PIT1 instead of MCFINT_VECBASE + MCFINT_PIT1 so we can support
those parts that have the pit1 interrupt on other than the first interrupt
controller.

Signed-off-by: Steven King <sfking@fdwdc.com>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-07-16 09:59:21 +10:00